This document explains how to orient and print the various printed parts. This guide uses Slic3r
All parts (other than the handle) should be printed with an infill of 100% and layer height of 0.2mm. The handle should be printed with an infil of 20%.
The following parts can be printed without any supports:
- Handle cover
- Handle coupler
- Button Buttom
- Lens bottom
- Lens Top
- Specula Holder
- Head Lock
- Button Lock
- Name Plate Lock
- Name Plate Unlimited
The following part must be printed with full supports:
- Battery Compartment
- Head Shell
- Inner head
- Button Top
- Neck
Orient the parts as in the build plate below:
