Skip to content

Latest commit

 

History

History
14 lines (12 loc) · 797 Bytes

README.md

File metadata and controls

14 lines (12 loc) · 797 Bytes

NOT FOR CLINICAL USE Tourniquet

While we are working very hard to prepare this tourniquet for clinical use, we do not consider it ready yet. Please do not deploy this unless you are in a crisis situation and know exactly what you are doing. 3D printed tourniquet to stop bleeding, especially related to penetrating injuries

Print settings

  • Material: ABS

  • Layer Height: 0.2 mm

  • Infill: 100%

  • Bed temperature: 100 Cْ temp. at the first layer to avoid warping.

  • Supports: The buckle and rod need to be printed with support. Make sure there is no support on the holder part.

  • Vertical shells:

    • Buckle: 2 perimeters
    • Holder and rod: 4 perimeters

  • Horizontal shells: Print all parts with 2 top and 2 bottom horizontal shell thickness. Holder and rod should have 4 top and 4 bottom.