Added initial i3 dot files

Author: 8sunyuan

.Xresources

@@ -0,0 +1 @@
+URxvt.font: xft:monospace:size 16

compton.conf

@@ -0,0 +1,10 @@
+# Fading
+fading 			= true;
+fade-in-step		= 0.05;
+fade-out-step		= 0.05;
+fade-exclue		= [];
+
+# Opacity
+active-opacity  	= 0.9;
+inactive-opacity	= 0.6;
+opacity-rule = [ "99:class_g = 'rofi'" ];

config

@@ -0,0 +1,208 @@
+#i3 config file (v4)
+#
+# Please see https://i3wm.org/docs/userguide.html for a complete reference!
+#
+# This config file uses keycodes (bindsym) and was written for the QWERTY
+# layout.
+#
+# To get a config file with the same key positions, but for your current
+# layout, use the i3-config-wizard
+#
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+font pango:System San Francisco Display 10
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+#font pango:DejaVu Sans Mono 8
+
+# Before i3 v4.8, we used to recommend this one as the default:
+# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+# The font above is very space-efficient, that is, it looks good, sharp and
+# clear in small sizes. However, its unicode glyph coverage is limited, the old
+# X core fonts rendering does not support right-to-left and this being a bitmap
+# font, it doesn't scale on retina/hidpi displays.
+
+# use these keys for focus, movement, and resize directions when reaching for
+# the arrows is not convenient
+set $up l
+set $down k
+set $left j
+set $right semicolon
+
+# use Mouse+Mod1 to drag floating windows to their wanted position
+floating_modifier Mod1
+
+# start a terminal
+bindsym Mod1+Return exec i3-sensible-terminal
+
+#i3 Gaps
+for_window [class="^.*"] border pixel 0
+gaps inner 15
+gaps outer 20
+
+
+# kill focused window
+bindsym Mod1+Shift+q kill
+
+# start dmenu (a program launcher)
+bindsym Mod1+d exec rofi -show run -lines 5 -bw 0 -width 100 -padding 300 -fullscreen
+
+# There also is the (new) i3-dmenu-desktop which only displays applications
+# shipping a .desktop file. It is a wrapper around dmenu, so you need that
+# installed.
+# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop
+
+# change focus
+bindsym Mod1+$left focus left
+bindsym Mod1+$down focus down
+bindsym Mod1+$up focus up
+bindsym Mod1+$right focus right
+
+# alternatively, you can use the cursor keys:
+bindsym Mod1+Left focus left
+bindsym Mod1+Down focus down
+bindsym Mod1+Up focus up
+bindsym Mod1+Right focus right
+
+# move focused window
+bindsym Mod1+Shift+$left move left
+bindsym Mod1+Shift+$down move down
+bindsym Mod1+Shift+$up move up
+bindsym Mod1+Shift+$right move right
+
+# alternatively, you can use the cursor keys:
+bindsym Mod1+Shift+Left move left
+bindsym Mod1+Shift+Down move down
+bindsym Mod1+Shift+Up move up
+bindsym Mod1+Shift+Right move right
+
+# split in horizontal orientation
+bindsym Mod1+h split h
+
+# split in vertical orientation
+bindsym Mod1+v split v
+
+# enter fullscreen mode for the focused container
+bindsym Mod1+f fullscreen toggle
+
+# change container layout (stacked, tabbed, toggle split)
+bindsym Mod1+s layout stacking
+bindsym Mod1+w layout tabbed
+bindsym Mod1+e layout toggle split
+
+# toggle tiling / floating
+bindsym Mod1+Shift+space floating toggle
+
+# change focus between tiling / floating windows
+bindsym Mod1+space focus mode_toggle
+
+# focus the parent container
+bindsym Mod1+a focus parent
+
+# focus the child container
+#bindsym Mod1+d focus child
+
+# move the currently focused window to the scratchpad
+bindsym Mod1+Shift+minus move scratchpad
+
+# Show the next scratchpad window or hide the focused scratchpad window.
+# If there are multiple scratchpad windows, this command cycles through them.
+bindsym Mod1+minus scratchpad show
+
+# Define names for default workspaces for which we configure key bindings later on.
+# We use variables to avoid repeating the names in multiple places.
+set $ws1 "1"
+set $ws2 "2"
+set $ws3 "3"
+set $ws4 "4"
+set $ws5 "5"
+set $ws6 "6"
+set $ws7 "7"
+set $ws8 "8"
+set $ws9 "9"
+set $ws10 "10"
+
+
+# switch to workspace
+bindsym Mod1+1 workspace $ws1
+bindsym Mod1+2 workspace $ws2
+bindsym Mod1+3 workspace $ws3
+bindsym Mod1+4 workspace $ws4
+bindsym Mod1+5 workspace $ws5
+bindsym Mod1+6 workspace $ws6
+bindsym Mod1+7 workspace $ws7
+bindsym Mod1+8 workspace $ws8
+bindsym Mod1+9 workspace $ws9
+bindsym Mod1+0 workspace $ws10
+
+# move focused container to workspace
+bindsym Mod1+Shift+1 move container to workspace $ws1
+bindsym Mod1+Shift+2 move container to workspace $ws2
+bindsym Mod1+Shift+3 move container to workspace $ws3
+bindsym Mod1+Shift+4 move container to workspace $ws4
+bindsym Mod1+Shift+5 move container to workspace $ws5
+bindsym Mod1+Shift+6 move container to workspace $ws6
+bindsym Mod1+Shift+7 move container to workspace $ws7
+bindsym Mod1+Shift+8 move container to workspace $ws8
+bindsym Mod1+Shift+9 move container to workspace $ws9
+bindsym Mod1+Shift+0 move container to workspace $ws10
+
+# reload the configuration file
+bindsym Mod1+Shift+c reload
+# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
+bindsym Mod1+Shift+r restart
+# exit i3 (logs you out of your X session)
+bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
+
+# resize window (you can also use the mouse for that)
+mode "resize" {
+        # These bindings trigger as soon as you enter the resize mode
+
+        # Pressing left will shrink the window’s width.
+        # Pressing right will grow the window’s width.
+        # Pressing up will shrink the window’s height.
+        # Pressing down will grow the window’s height.
+        bindsym $left       resize shrink width 10 px or 10 ppt
+        bindsym $down       resize grow height 10 px or 10 ppt
+        bindsym $up         resize shrink height 10 px or 10 ppt
+        bindsym $right      resize grow width 10 px or 10 ppt
+
+        # same bindings, but for the arrow keys
+        bindsym Left        resize shrink width 10 px or 10 ppt
+        bindsym Down        resize grow height 10 px or 10 ppt
+        bindsym Up          resize shrink height 10 px or 10 ppt
+        bindsym Right       resize grow width 10 px or 10 ppt
+
+        # back to normal: Enter or Escape or Mod1+r
+        bindsym Return mode "default"
+        bindsym Escape mode "default"
+        bindsym Mod1+r mode "default"
+}
+
+bindsym Mod1+r mode "resize"
+
+# Start i3bar to display a workspace bar (plus the system information i3status
+# finds out, if available)
+bar {
+        status_command i3status
+}
+
+# Wallpaper
+exec_always feh --bg-scale /home/msun/Pictures/wall4.jpg
+
+# Compton
+exec_always --no-startup-id compton 
+
+
+#######################################################################
+# automatically start i3-config-wizard to offer the user to create a
+# keysym-based config which used their favorite modifier (alt or windows)
+#
+# i3-config-wizard will not launch if there already is a config file
+# in ~/.i3/config.
+#
+# Please remove the following exec line:
+#######################################################################
+exec i3-config-wizard