-
Notifications
You must be signed in to change notification settings - Fork 52
Enable HPOVLogicalInterconnectPortMonitoring
Enable port monitoring for a logical interconnect.
Enable-HPOVLogicalInterconnectPortMonitoring [-InputObject] <Object> [-AnalyzerPort] <Object> [-MonitoredPorts] <Hashtable>[ [-ApplianceConnection] <Array>] [<CommonParameters>]Port monitoring enables you to send a copy of every Ethernet or Fibre Channel frame coming in and going out of a downlink (server-facing) port to another port. To evaluate network traffic between ports, you can connect debugging equipment, such as a network analyzer. This capability is important in a server environment where there is limited physical access to the network interfaces on the servers.
NOTE: * You cannot use Virtual Connect to forward captured traffic to a server. For more information, see the HPE Virtual Connect for c-Class BladeSystem User Guide in the Hewlett Packard Enterprise Information Library. * You can configure one network analyzer port (the uplink port) for up to 16 downlink server ports within a logical interconnect. * The HPE Virtual Connect 16Gb 24-Port Fibre Channel Module monitors 1 downlink server port. * HPE Virtual Connect 16Gb 24-Port Fibre Channel Module firmware must be 4.00 or later
Required Privileges: Network administrator
-AnalyzerPort <Object>
Specifies the network analyzer port (the mirrored-to uplink port) for the downlink server ports within a single enclosure. There is a single �mirrored-to port� per logical interconnect.
Allowed string value: "Bay1:X6" or "Enclosure1:Bay6:Q1.1"
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-ApplianceConnection <Array>
Aliases [-Appliance]
Specify one or more HPOneView.Appliance.Connection object(s) or Name property value(s).
Default Value: ${Global:ConnectedSessions} | ? Default
| Aliases | Appliance |
| Required? | False |
| Position? | named |
| Default value | (${Global:ConnectedSessions} | ? Default) |
| Accept pipeline input? | true (ByPropertyName) |
| Accept wildcard characters? | False |
-InputObject <Object>
HPOneView.Networking.LogicalInterconnect from Get-HPOVLogicalInterconnect.
| Aliases | uri, li, name, Resource |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | true (ByValue) |
| Accept wildcard characters? | False |
-MonitoredPorts <Hashtable>
An Array of Hashtable or PSCustomObject with the following format:
@{Port = "Bay1:D2"; Direction = "toserver"}
The "Port" property format must be "BayID:ServerDownlinkPortID". For HPE Synergy, the "Port" property must be "EnclosureID:BayID:ServerDownlinkPortID".
The "Direction" property value must be one of the following:
* ToServer
* FromServer
* Both
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216)
HPoneView.Networking.LogicalInterconnect [System.Management.Automation.PSCustomObject]
Logical Interconnect resource object from Get-HPOVLogicalInterconnect
HPOneView.Appliance.TaskResource [System.Management.Automation.PSCustomObject]
Asyncronous task resource to monitor.
-------------------------- EXAMPLE 1 --------------------------Get-HPOVLogicalInterconnect -Name "Encl1-Default VC FF LIG" | Enable-HPOVLogicalInterconnectPortMonitoring -AnalyzerPort "Bay1:Q1.1" -MonitoredPorts @{Port = "Bay1:d2"; Direction = "toserver"}, @{Port = "Bay1:D3"; Direction = "MonitoredFromServer"}, @{Port = "Bay2:D7"; Direction = "Both"}
Enable port monitoring for the specific logical interconnect.
-------------------------- EXAMPLE 2 --------------------------Get-HPOVLogicalInterconnect -Name "LE1-Default VC LIG" | Enable-HPOVLogicalInterconnectPortMonitoring -AnalyzerPort "Enclosure1:Bay3:Q1.1" -MonitoredPorts @{Port = "Enclosure1:Bay3:d1"; Direction = "Both"}, @{Port = "Enclosure1:Bay6:d1"; Direction = "Both"}
Enable port monitoring for the specific logical interconnect.
Enable port monitoring for a logical interconnect.
Enable-HPOVLogicalInterconnectPortMonitoring [-InputObject] <Object> [-AnalyzerPort] <Object> [-MonitoredPorts] <Hashtable>[ [-ApplianceConnection] <Array>] [<CommonParameters>]Port monitoring enables you to send a copy of every Ethernet or Fibre Channel frame coming in and going out of a downlink (server-facing) port to another port. To evaluate network traffic between ports, you can connect debugging equipment, such as a network analyzer. This capability is important in a server environment where there is limited physical access to the network interfaces on the servers.
NOTE: * You cannot use Virtual Connect to forward captured traffic to a server. For more information, see the HPE Virtual Connect for c-Class BladeSystem User Guide in the Hewlett Packard Enterprise Information Library. * You can configure one network analyzer port (the uplink port) for up to 16 downlink server ports within a logical interconnect. * The HPE Virtual Connect 16Gb 24-Port Fibre Channel Module monitors 1 downlink server port. * HPE Virtual Connect 16Gb 24-Port Fibre Channel Module firmware must be 4.00 or later
Required Privileges: Network administrator
-AnalyzerPort <Object>
Specifies the network analyzer port (the mirrored-to uplink port) for the downlink server ports within a single enclosure. There is a single “mirrored-to port” per logical interconnect.
Allowed string value: "Bay1:X6" or "Enclosure1:Bay6:Q1.1"
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
-ApplianceConnection <Array>
Aliases [-Appliance]
Specify one or more HPOneView.Appliance.Connection object(s) or Name property value(s).
Default Value: ${Global:ConnectedSessions} | ? Default
| Aliases | Appliance |
| Required? | False |
| Position? | named |
| Default value | (${Global:ConnectedSessions} | ? Default) |
| Accept pipeline input? | true (ByPropertyName) |
| Accept wildcard characters? | False |
-InputObject <Object>
HPOneView.Networking.LogicalInterconnect from Get-HPOVLogicalInterconnect.
| Aliases | uri, li, name, Resource |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | true (ByValue) |
| Accept wildcard characters? | False |
-MonitoredPorts <Hashtable>
An Array of Hashtable or PSCustomObject with the following format:
@{Port = "Bay1:D2"; Direction = "toserver"}
The "Port" property format must be "BayID:ServerDownlinkPortID". For HPE Synergy, the "Port" property must be "EnclosureID:BayID:ServerDownlinkPortID".
The "Direction" property value must be one of the following:
* ToServer
* FromServer
* Both
| Aliases | None |
| Required? | true |
| Position? | named |
| Default value | |
| Accept pipeline input? | false |
| Accept wildcard characters? | False |
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216)
HPoneView.Networking.LogicalInterconnect [System.Management.Automation.PSCustomObject]
Logical Interconnect resource object from Get-HPOVLogicalInterconnect
HPOneView.Appliance.TaskResource [System.Management.Automation.PSCustomObject]
Async task Resource object for configuring port monitoring on the requested logical intercinnect.
-------------------------- EXAMPLE 1 --------------------------Get-HPOVLogicalInterconnect -Name "Encl1-Default VC FF LIG" | Enable-HPOVLogicalInterconnectPortMonitoring -AnalyzerPort 'Bay1:Q1.1' -MonitoredPorts @{Port = "Bay1:d2"; Direction = "toserver"}, @{Port = "Bay1:D3"; Direction = "MonitoredFromServer"}, @{Port = "Bay2:D7"; Direction = "Both"}
Enable port monitoring for the specific logical interconnect.
-------------------------- EXAMPLE 2 --------------------------Get-HPOVLogicalInterconnect -Name "LE1-Default VC LIG" | Enable-HPOVLogicalInterconnectPortMonitoring -AnalyzerPort 'Enclosure1:Bay3:Q1.1' -MonitoredPorts @{Port = "Enclosure1:Bay3:d1"; Direction = "Both"}, @{Port = "Enclosure1:Bay6:d1"; Direction = "Both"}
Enable port monitoring for the specific logical interconnect.