Endpoint not connecting to the gateway

[bhavya220702]

I am working with three devices:

SX1302 LoRaWAN Gateway: Waveshare SX1302 868M LoRaWAN Gateway.
Raspberry Pi 5: The SX1302 HAT is connected to this device.
Heltech Wi-Fi LoRa 32 (V3): Heltec Wi-Fi LoRa 32 V3 serves as the endpoint device.
I successfully created a LoRaWAN gateway on The Things Network (TTN) website (TTN Console - EU Server). The gateway setup was completed without any issues.

To align with the Indian ISM band (865-867 MHz), I configured the SX1302 packet forwarder with the appropriate frequency settings. However, the Heltec Wi-Fi LoRa 32 endpoint device is not connecting to the network created by the gateway.

How to connect all these device so that Heltec Wi-Fi Lora 32 can access the network created by the gateway ?

I am attaching the config file for the gateway on TTN and for the packet forwarder on the Raspberry pi

Gateway.json

global_ind.json

[mcoracin]

Hello,
On the gateway logs, do you see uplink (JSON up frames) packets being received from the Heltec end-node ?
Which LoRaWAN stack are you running on the Heltec device ?
Do you have logs from both sides (gateway and end-node) ?
Best regards,
Michael

[bhavya220702]

No I am not able to see any uplink connected from the Heltec end node.
Don't have any logs from either side.
I think some problem is with the configuration.

Hello, On the gateway logs, do you see uplink (JSON up frames) packets being received from the Heltec end-node ? Which LoRaWAN stack are you running on the Heltec device ? Do you have logs from both sides (gateway and end-node) ? Best regards, Michael