Work on New UpBox+ ?

[3DWombat]

Does this tool work on the new UpBox+ . I think the machine ID is 2782

How do I make it work for this printer?

When I run it it comes up with ""[ERROR] USB Open Device (0001:2777/277D/277F/0001) not found" or something like that.

I got that number (2782)from the device manager properties for the usb device hardware id.

Regards Dennis

[3DWombat]

Hello, anyone out there.

I would love to try this tool on my new UpBox+ but it seems it doesn't detect the device.

up3dinfo,exe comes back with "[ERROR] USB Open Device <4745:0001/2777/277D/277F> not found"

I assume from this picture the ID for the UpBox+ is 2782

Could someone add this USB id code to the repository, as I can't get it to compile on my machine(noob).

Regards Dennis

[3DWombat]

Ok finally got something to compile. Ran up3dinfo and got this result.

up3dinfo
UP 3D PRINTER INFO:
TypeID:2710 Serial:1 ROM:6.1500 Model:Please update your app U1:1.00 U3:1 U4:101
U7:100
Max-X:6.000000 Max-Y:-3.000000 Max-Z:210.000000 Steps/mm-X:644.000000 Steps/mm-Y
:644.000000 Steps/mm-Z:3220.000000 Steps--A: 40.000000 Print sets: 1
U2:213.00 U3:-262.00 U10:0.00 U11:0.00 U12:0.00 U13:1.00
Set#0 Name:"Set 01"
ND:0.00 LT:0.00 SW:0.00 ST:0.00 HW:0.00 HS:0.00 HL:0.00 XW:0.00 XS:0.00 XL:0.0
0 SV:0.00
HV:0.00 XV:0.00 JS:0.00 SZ:0.00 HZ:1.00 SZ:0.90 FZ:0.45
O1:20.00 O2:6.00 O3:1.00 O4:1500.00 O5:2000.00 O6:2000.00 U1:0.00 U2:0.00 U3:0
.00 U4:0.00 U5:0.00 U6:0.00

Do i need to update some info in the up files for the "Model:Please update your app" line above?

I could get the up3dload to compile, but I haven't tested yet. up3dshell won't compile because of line 7 #include <ncurses/curses.h> in the upshell.c . I don't know if I got the libncurses installed properly. pacman came up with:---

pacman -S mingw-w64-x86_64-ncurses
resolving dependencies...
looking for conflicting packages...

Packages (5) mingw-w64-x86_64-expat-2.2.0-2 mingw-w64-x86_64-gettext-0.19.7-1
mingw-w64-x86_64-libsystre-1.0.1-2
mingw-w64-x86_64-libtre-git-r122.c2f5d13-4
mingw-w64-x86_64-ncurses-6.0.20161105-1

Total Download Size: 4.86 MiB
Total Installed Size: 31.24 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
mingw-w64-x86_64-ex... 120.3 KiB 118M/s 00:00 [#####################] 100%
mingw-w64-x86_64-ge... 3.0 MiB 738K/s 00:04 [#####################] 100%
mingw-w64-x86_64-li... 69.2 KiB 0.00B/s 00:00 [#####################] 100%
mingw-w64-x86_64-li... 9.3 KiB 0.00B/s 00:00 [#####################] 100%
mingw-w64-x86_64-nc... 1709.1 KiB 660K/s 00:03 [#####################] 100%
(5/5) checking keys in keyring [#####################] 100%
(5/5) checking package integrity [#####################] 100%
(5/5) loading package files [#####################] 100%
(5/5) checking for file conflicts [#####################] 100%
error: failed to commit transaction (conflicting files)
mingw-w64-x86_64-ncurses: /mingw64/lib/libncurses.a exists in filesystem
Errors occurred, no packages were upgraded.

So I renamed the file to orig_libncurses.a and ran pacman again.
It installed

Then I compiled up3dshell, it compiles with no errors.

I ran up3dshell, after first initializing the upbox+, and got some readouts, but the program won't quit on cntrl-c, I have to close the console window instead.

Are there any other files I need to update before trying this out? I will try and use it at a safe height , nowhere near the print bed first...

Dennis

[3DWombat]

Output from up3dshell

Dennis

[DiegoGiovany]

Any news on this? can you print some gcode?

If I can ask, please upload the compiled code/patch? thanks !

[reaganks]

Has anybody tried using Up Mini 2 for this system? I am sorry if this has been asked before.

[ongspxm]

i got the [ERROR] USB Open Device (0001:2777/277D/277F/0001) not found error too.

this is my output of my lsusb

[  122.525798] usb 1-4: USB disconnect, device number 2
[  125.526869] usb 1-4: new full-speed USB device number 6 using xhci_hcd
[  125.668137] usb 1-4: New USB device found, idVendor=4745, idProduct=2782
[  125.668149] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  125.668156] usb 1-4: Product: UP BOX+
[  125.668162] usb 1-4: Manufacturer: Tiertime
[ 125.668168] usb 1-4: SerialNumber: 531620

i am new to this, can i get some guide on how to recompile so that it works?