diff --git a/coupled_AM2_LM3_SIS/AM2_MOM6i_1deg/MOM_input b/coupled_AM2_LM3_SIS/AM2_MOM6i_1deg/MOM_input index d56d6ae28d..a4a5c6ae8b 100644 --- a/coupled_AM2_LM3_SIS/AM2_MOM6i_1deg/MOM_input +++ b/coupled_AM2_LM3_SIS/AM2_MOM6i_1deg/MOM_input @@ -65,8 +65,8 @@ C_P = 3925.0 ! [J kg-1 K-1] default = 3991.86795711963 ! The heat capacity of sea water, approximated as a constant. This is only used ! if ENABLE_THERMODYNAMICS is true. The default value is from the TEOS-10 ! definition of conservative temperature. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = True - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. SAVE_INITIAL_CONDS = True ! [Boolean] default = False ! If true, write the initial conditions to a file given by IC_OUTPUT_FILE. @@ -282,6 +282,12 @@ KHTH = 10.0 ! [m2 s-1] default = 0.0 KHTH_MAX = 900.0 ! [m2 s-1] default = 0.0 ! The maximum horizontal thickness diffusivity. +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_continuity === ! === module MOM_continuity_PPM === diff --git a/coupled_AM2_LM3_SIS/CM2G63L/MOM_input b/coupled_AM2_LM3_SIS/CM2G63L/MOM_input index f7d5ff0dd7..5f2305473c 100644 --- a/coupled_AM2_LM3_SIS/CM2G63L/MOM_input +++ b/coupled_AM2_LM3_SIS/CM2G63L/MOM_input @@ -65,8 +65,8 @@ C_P = 3925.0 ! [J kg-1 K-1] default = 3991.86795711963 ! The heat capacity of sea water, approximated as a constant. This is only used ! if ENABLE_THERMODYNAMICS is true. The default value is from the TEOS-10 ! definition of conservative temperature. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = True - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. SAVE_INITIAL_CONDS = True ! [Boolean] default = False ! If true, write the initial conditions to a file given by IC_OUTPUT_FILE. @@ -282,6 +282,12 @@ KHTH = 10.0 ! [m2 s-1] default = 0.0 KHTH_MAX = 900.0 ! [m2 s-1] default = 0.0 ! The maximum horizontal thickness diffusivity. +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_continuity === ! === module MOM_continuity_PPM === diff --git a/coupled_AM2_LM3_SIS2/AM2_SIS2B_MOM6i_1deg/MOM_input b/coupled_AM2_LM3_SIS2/AM2_SIS2B_MOM6i_1deg/MOM_input index 0b28642b25..d443ad1775 100644 --- a/coupled_AM2_LM3_SIS2/AM2_SIS2B_MOM6i_1deg/MOM_input +++ b/coupled_AM2_LM3_SIS2/AM2_SIS2B_MOM6i_1deg/MOM_input @@ -76,8 +76,8 @@ NKML = 2 ! [nondim] default = 2 NKBL = 2 ! [nondim] default = 2 ! The number of layers that are used as variable density buffer layers if ! BULKMIXEDLAYER is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = True - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. SAVE_INITIAL_CONDS = True ! [Boolean] default = False ! If true, write the initial conditions to a file given by IC_OUTPUT_FILE. IC_OUTPUT_FILE = "GOLD_IC" ! default = "MOM_IC" @@ -299,6 +299,12 @@ KHTH = 10.0 ! [m2 s-1] default = 0.0 KHTH_MAX = 900.0 ! [m2 s-1] default = 0.0 ! The maximum horizontal thickness diffusivity. +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_continuity === ! === module MOM_continuity_PPM === diff --git a/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_input b/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_input index 070bf10380..cbc7c7e8d0 100644 --- a/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_input +++ b/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_input @@ -76,8 +76,8 @@ NKML = 2 ! [nondim] default = 2 NKBL = 2 ! [nondim] default = 2 ! The number of layers that are used as variable density buffer layers if ! BULKMIXEDLAYER is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = True - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. SAVE_INITIAL_CONDS = True ! [Boolean] default = False ! If true, write the initial conditions to a file given by IC_OUTPUT_FILE. IC_OUTPUT_FILE = "GOLD_IC" ! default = "MOM_IC" @@ -306,6 +306,12 @@ KHTH = 10.0 ! [m2 s-1] default = 0.0 KHTH_MAX = 900.0 ! [m2 s-1] default = 0.0 ! The maximum horizontal thickness diffusivity. +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_continuity === ! === module MOM_continuity_PPM === diff --git a/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.short b/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.short index dd42d33414..99d00a827c 100644 --- a/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.short +++ b/coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.short @@ -38,8 +38,8 @@ C_P = 3925.0 ! [J kg-1 K-1] default = 3991.86795711963 USE_PSURF_IN_EOS = False ! [Boolean] default = True ! If true, always include the surface pressure contributions in equation of ! state calculations. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = False - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. SAVE_INITIAL_CONDS = True ! [Boolean] default = False ! If true, write the initial conditions to a file given by IC_OUTPUT_FILE. IC_OUTPUT_FILE = "GOLD_IC" ! default = "MOM_IC" @@ -264,6 +264,10 @@ KHTH_MAX = 900.0 ! [m2 s-1] default = 0.0 ! The maximum horizontal thickness diffusivity. ! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . ! === module MOM_dynamics_split_RK2 === diff --git a/ice_ocean_SIS2/Baltic_OM4_025/MOM_input b/ice_ocean_SIS2/Baltic_OM4_025/MOM_input index 52d9509c10..09acc5125f 100644 --- a/ice_ocean_SIS2/Baltic_OM4_025/MOM_input +++ b/ice_ocean_SIS2/Baltic_OM4_025/MOM_input @@ -87,8 +87,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = True - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. WRITE_GEOM = 0 ! default = 1 ! If =0, never write the geometry and vertical grid files. If =1, write the ! geometry and vertical grid files only for a new simulation. If =2, always @@ -425,6 +425,12 @@ USE_GM_WORK_BUG = True ! [Boolean] default = True ! If true, compute the top-layer work tendency on the u-grid with the incorrect ! sign, for legacy reproducibility. +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_continuity === ! === module MOM_continuity_PPM === diff --git a/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.short b/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.short index c19864e11a..49c6eff77c 100644 --- a/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.short +++ b/ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.short @@ -55,8 +55,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = False - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. WRITE_GEOM = 0 ! default = 1 ! If =0, never write the geometry and vertical grid files. If =1, write the ! geometry and vertical grid files only for a new simulation. If =2, always @@ -385,6 +385,10 @@ USE_GM_WORK_BUG = True ! [Boolean] default = False ! sign, for legacy reproducibility. ! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . ! === module MOM_dynamics_split_RK2 === diff --git a/ice_ocean_SIS2/Baltic_OM4_05/MOM_input b/ice_ocean_SIS2/Baltic_OM4_05/MOM_input index 95750c0661..fc08b2a1ac 100644 --- a/ice_ocean_SIS2/Baltic_OM4_05/MOM_input +++ b/ice_ocean_SIS2/Baltic_OM4_05/MOM_input @@ -86,8 +86,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = True - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. ! === module MOM_hor_index === ! Sets the horizontal array index types. @@ -441,6 +441,12 @@ USE_GM_WORK_BUG = True ! [Boolean] default = True ! If true, compute the top-layer work tendency on the u-grid with the incorrect ! sign, for legacy reproducibility. +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_continuity === ! === module MOM_continuity_PPM === diff --git a/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.short b/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.short index f0a1b553d2..0de6a99848 100644 --- a/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.short +++ b/ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.short @@ -55,8 +55,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = False - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. ! === module MOM_domains === REENTRANT_X = False ! [Boolean] default = True @@ -402,6 +402,10 @@ USE_GM_WORK_BUG = True ! [Boolean] default = False ! sign, for legacy reproducibility. ! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . ! === module MOM_dynamics_split_RK2 === diff --git a/ice_ocean_SIS2/OM4_025.JRA/MOM_input b/ice_ocean_SIS2/OM4_025.JRA/MOM_input index aac1de87d2..773e0018a9 100644 --- a/ice_ocean_SIS2/OM4_025.JRA/MOM_input +++ b/ice_ocean_SIS2/OM4_025.JRA/MOM_input @@ -87,8 +87,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = True - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. WRITE_GEOM = 0 ! default = 1 ! If =0, never write the geometry and vertical grid files. If =1, write the ! geometry and vertical grid files only for a new simulation. If =2, always @@ -423,6 +423,12 @@ KHTH_MAX_CFL = 0.1 ! [nondimensional] default = 0.8 ! model, but much smaller numbers (e.g. 0.1) seem to work better for ALE-based ! models. +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_continuity === ! === module MOM_continuity_PPM === diff --git a/ice_ocean_SIS2/OM4_025/MOM_input b/ice_ocean_SIS2/OM4_025/MOM_input index b247d51f80..9c254e325c 100644 --- a/ice_ocean_SIS2/OM4_025/MOM_input +++ b/ice_ocean_SIS2/OM4_025/MOM_input @@ -87,8 +87,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = True - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. WRITE_GEOM = 0 ! default = 1 ! If =0, never write the geometry and vertical grid files. If =1, write the ! geometry and vertical grid files only for a new simulation. If =2, always @@ -431,6 +431,12 @@ USE_GM_WORK_BUG = True ! [Boolean] default = True ! If true, compute the top-layer work tendency on the u-grid with the incorrect ! sign, for legacy reproducibility. +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_continuity === ! === module MOM_continuity_PPM === diff --git a/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.short b/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.short index da310c0fc8..4b29a0cad9 100644 --- a/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.short +++ b/ice_ocean_SIS2/OM4_025/MOM_parameter_doc.short @@ -55,8 +55,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = False - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. WRITE_GEOM = 0 ! default = 1 ! If =0, never write the geometry and vertical grid files. If =1, write the ! geometry and vertical grid files only for a new simulation. If =2, always @@ -392,6 +392,10 @@ USE_GM_WORK_BUG = True ! [Boolean] default = False ! sign, for legacy reproducibility. ! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . ! === module MOM_dynamics_split_RK2 === diff --git a/ice_ocean_SIS2/OM4_05/MOM_input b/ice_ocean_SIS2/OM4_05/MOM_input index 72c5931f88..6364520b6c 100644 --- a/ice_ocean_SIS2/OM4_05/MOM_input +++ b/ice_ocean_SIS2/OM4_05/MOM_input @@ -87,8 +87,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = True - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. ! === module MOM_hor_index === ! Sets the horizontal array index types. @@ -446,6 +446,12 @@ USE_GM_WORK_BUG = True ! [Boolean] default = True ! If true, compute the top-layer work tendency on the u-grid with the incorrect ! sign, for legacy reproducibility. +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_continuity === ! === module MOM_continuity_PPM === diff --git a/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.short b/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.short index 7375570fce..a7be7a56ed 100644 --- a/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.short +++ b/ice_ocean_SIS2/OM4_05/MOM_parameter_doc.short @@ -55,8 +55,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = False - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. ! === module MOM_domains === TRIPOLAR_N = True ! [Boolean] default = False @@ -407,6 +407,10 @@ USE_GM_WORK_BUG = True ! [Boolean] default = False ! sign, for legacy reproducibility. ! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . ! === module MOM_dynamics_split_RK2 === diff --git a/ice_ocean_SIS2/OM_1deg/MOM_input b/ice_ocean_SIS2/OM_1deg/MOM_input index beb30beb27..ed26c95198 100644 --- a/ice_ocean_SIS2/OM_1deg/MOM_input +++ b/ice_ocean_SIS2/OM_1deg/MOM_input @@ -61,8 +61,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = False - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. WRITE_GEOM = 0 ! default = 1 ! If =0, never write the geometry and vertical grid files. If =1, write the ! geometry and vertical grid files only for a new simulation. If =2, always @@ -431,6 +431,12 @@ USE_GM_WORK_BUG = True ! [Boolean] default = False ! If true, compute the top-layer work tendency on the u-grid with the incorrect ! sign, for legacy reproducibility. +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_dynamics_split_RK2 === ! === module MOM_continuity === diff --git a/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.short b/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.short index d8fbe9010d..0fe783dedd 100644 --- a/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.short +++ b/ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.short @@ -58,8 +58,8 @@ BAD_VAL_SST_MAX = 55.0 ! [deg C] default = 45.0 BAD_VAL_SST_MIN = -3.0 ! [deg C] default = -2.1 ! The value of SST below which a bad value message is triggered, if ! CHECK_BAD_SURFACE_VALS is true. -DEFAULT_2018_ANSWERS = True ! [Boolean] default = False - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. WRITE_GEOM = 0 ! default = 1 ! If =0, never write the geometry and vertical grid files. If =1, write the ! geometry and vertical grid files only for a new simulation. If =2, always @@ -419,6 +419,10 @@ USE_GM_WORK_BUG = True ! [Boolean] default = False ! sign, for legacy reproducibility. ! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . ! === module MOM_dynamics_split_RK2 === diff --git a/ocean_only/DOME/MOM_input b/ocean_only/DOME/MOM_input index 92b4bb3902..bbbbfc8898 100644 --- a/ocean_only/DOME/MOM_input +++ b/ocean_only/DOME/MOM_input @@ -38,8 +38,6 @@ DTBT_RESET_PERIOD = 8.64E+04 ! [s] default = 3600.0 ! is negative, DTBT is set based only on information available at ! initialization. If 0, DTBT will be set every dynamics time step. The default ! is set by DT_THERM. This is only used if SPLIT is true. -DEFAULT_2018_ANSWERS = False ! [Boolean] default = False - ! This sets the default value for the various _2018_ANSWERS parameters. ! === module MOM_fixed_initialization === INPUTDIR = "INPUT" ! default = "." diff --git a/ocean_only/unit_tests/MOM_input b/ocean_only/unit_tests/MOM_input index ae16f8ccd7..6f5c8d280a 100644 --- a/ocean_only/unit_tests/MOM_input +++ b/ocean_only/unit_tests/MOM_input @@ -48,8 +48,8 @@ DT = 8.64E+04 ! [s] ! The (baroclinic) dynamics time step. The time-step that is actually used will ! be an integer fraction of the forcing time-step (DT_FORCING in ocean-only mode ! or the coupling timestep in coupled mode.) -DEFAULT_2018_ANSWERS = True ! [Boolean] default = True - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. ! === module MOM_hor_index === ! Sets the horizontal array index types. @@ -190,6 +190,12 @@ KV = 1.0 ! [m2 s-1] ! === module MOM_thickness_diffuse === +! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . + ! === module MOM_continuity === ! === module MOM_continuity_PPM === diff --git a/ocean_only/unit_tests/MOM_parameter_doc.short b/ocean_only/unit_tests/MOM_parameter_doc.short index 1587e26014..38af691fef 100644 --- a/ocean_only/unit_tests/MOM_parameter_doc.short +++ b/ocean_only/unit_tests/MOM_parameter_doc.short @@ -13,8 +13,8 @@ DT = 8.64E+04 ! [s] ! The (baroclinic) dynamics time step. The time-step that is actually used will ! be an integer fraction of the forcing time-step (DT_FORCING in ocean-only mode ! or the coupling timestep in coupled mode.) -DEFAULT_2018_ANSWERS = True ! [Boolean] default = False - ! This sets the default value for the various _2018_ANSWERS parameters. +DEFAULT_ANSWER_DATE = 20181231 ! default = 99991231 + ! This sets the default value for the various _ANSWER_DATE parameters. ! === module MOM_domains === NIGLOBAL = 4 ! @@ -104,6 +104,10 @@ KV = 1.0 ! [m2 s-1] ! === module MOM_thickness_diffuse === ! === module MOM_porous_barriers === +PORBAR_ANSWER_DATE = 99991231 ! default = 20181231 + ! The vintage of the porous barrier weight function calculations. Values below + ! 20220806 recover the old answers in which the layer averaged weights are not + ! strictly limited by an upper-bound of 1.0 . ! === module MOM_dynamics_unsplit ===