Ratrig Vcore 3.1 500 - missing LED and Orbiter Smart sensor

[Obolobolobo]

What happened

After a fresh installation of RC4, I attempted to configure my V-Core 3.1 500 with an EBB42 v1.2 and an Octopus V1.1 F446. The wizard completed without any issues, but in Mainsail both the LED and the Smart Sensor are missing.

I performed a clean SD image deployment and repeated the entire configuration from scratch, but the result was the same: no Dayspring LED and no OSS detected.

For comparison, I carried out the exact same procedure on my V-Core 4, and both the Orbiter Smart Sensor and the Dayspring LEDs were detected and working correctly.

What did you expect to happen

I would expect the same behaviour on both machines — the V-Core 3.1 and the V-Core 4 — after a fresh configuration

How to reproduce

Try deploying a fresh SD card with RC4 on the V-Core 3.1.

Additional information

No response

[nutbox76]

I've done a fresh install of the latest ratos as you have on my vc3.1 and have selected dayspring leds in the configurator and as you have no led control in the dashboard and no leds working,also have wired as it is in the vc4 instructions.
How do we get these working please.