-
-
Notifications
You must be signed in to change notification settings - Fork 468
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Fan calibration gives very wrong results. #2941
Comments
The autocalibration simply sets a speed, wait a bit, then reads the RPM. Does the speed take long to settle to its RPM? If you do a little experimenting you should be able to see why it gives this result. |
It seems to wait for a bit then just give a wildly wrong result which it never used to do. feels like its something telling the fans to kick up higher but theres nothing thast should be doing that |
The value it reads is visible during the auto cal. Are these way off or is it only when you read it back? Add some screenshots that might help . |
Im running a calibration to get some now, one thing i have noticed especially for AMD GPU is that when trying to calibrate to 100%, redeon reads the speed as only 90% give or take. not 100% |
They’re way off. seems did one calibration manually and got semi-decent
results but the automatics are insanely weird
…On Tue, 28 Jan 2025 at 23:47, Rémi Mercier ***@***.***> wrote:
The value it reads is visible during the auto cal. Are these way off or is
it only when you read it back? Add some screenshots that might help .
—
Reply to this email directly, view it on GitHub
<#2941 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BKN4B6JBIVKBIPBD5G4CHE32NAJILAVCNFSM6AAAAABV6XTUWGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMRQGI4DGNJTGU>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
The delay before the speed actually change might bust the wait time the auto cal has. Simply do it manually and let it be. |
Okay, ill give that a try hopefully it works |
when calibrating fan speeds, software reports fan speeds going down from something like 1100RPM (when the max is 1500) then stopping at 900. no other fan controlling software was in use and this issue wasnt presented at first. the first calibration was fine then after a while i had to uninstall and reinstall and this issue was caused.
The text was updated successfully, but these errors were encountered: