diff --git a/i18n/en/docusaurus-plugin-content-docs/version-v2.1/ops/deploy-guide-beginner.md b/i18n/en/docusaurus-plugin-content-docs/version-v2.1/ops/deploy-guide-beginner.md
index 85624d1af9b..29a118cd31b 100644
--- a/i18n/en/docusaurus-plugin-content-docs/version-v2.1/ops/deploy-guide-beginner.md
+++ b/i18n/en/docusaurus-plugin-content-docs/version-v2.1/ops/deploy-guide-beginner.md
@@ -33,11 +33,11 @@ Data source automatic proxy is turned on by default, and it can be turned off by
In the @SpringBootApplication annotation, exclude com.alibaba.cloud.seata.GlobalTransactionAutoConfiguration in spring-cloud-starter-alibaba-seata
```
-- Recommendations for spring-cloud-starter-alibaba-seata dependency configuration
+- Recommendations for spring-cloud-starter-alibaba-seata dependency configuration
```java
- io.seata
+ org.apache.seata
seata-spring-boot-starter
@@ -45,7 +45,7 @@ In the @SpringBootApplication annotation, exclude com.alibaba.cloud.seata.Global
spring-cloud-starter-alibaba-seata
- io.seata
+ org.apache.seata
seata-spring-boot-starter
@@ -117,7 +117,7 @@ Note: It is recommended to allocate 2G of heap memory and 1G of off-heap memory.
0.9.0: support.spring.datasource.autoproxy=true
```
If XA mode is used, `@EnableAutoDataSourceProxy(dataSourceProxyMode = "XA")`
-
+
- For manual configuration, please refer to the example below
```
@Primary
@@ -134,7 +134,7 @@ Note: It is recommended to allocate 2G of heap memory and 1G of off-heap memory.
- When using automatic proxy data sources, you need to adjust the configuration file if you use XA mode
application.properties
```
- seata.data-source-proxy-mode=XA
+ seata.data-source-proxy-mode=XA
```
application.yml
```
@@ -163,7 +163,7 @@ Note: It is recommended to allocate 2G of heap memory and 1G of off-heap memory.
txServiceGroup = applicationName + "-fescar-service-group";
this.seataProperties.setTxServiceGroup(txServiceGroup);
}
-
+
return new GlobalTransactionScanner(applicationName, txServiceGroup);
}
```
@@ -257,4 +257,4 @@ public void rollback(BusinessActionContext context) {
pointcut.setExpression("Configure pointcut expression to enable global transaction interceptor");
return new DefaultPointcutAdvisor(pointcut, aspectTransactionalInterceptor);
}
-```
\ No newline at end of file
+```
diff --git a/i18n/en/docusaurus-plugin-content-docs/version-v2.2/ops/deploy-guide-beginner.md b/i18n/en/docusaurus-plugin-content-docs/version-v2.2/ops/deploy-guide-beginner.md
index 85624d1af9b..29a118cd31b 100644
--- a/i18n/en/docusaurus-plugin-content-docs/version-v2.2/ops/deploy-guide-beginner.md
+++ b/i18n/en/docusaurus-plugin-content-docs/version-v2.2/ops/deploy-guide-beginner.md
@@ -33,11 +33,11 @@ Data source automatic proxy is turned on by default, and it can be turned off by
In the @SpringBootApplication annotation, exclude com.alibaba.cloud.seata.GlobalTransactionAutoConfiguration in spring-cloud-starter-alibaba-seata
```
-- Recommendations for spring-cloud-starter-alibaba-seata dependency configuration
+- Recommendations for spring-cloud-starter-alibaba-seata dependency configuration
```java
- io.seata
+ org.apache.seata
seata-spring-boot-starter
@@ -45,7 +45,7 @@ In the @SpringBootApplication annotation, exclude com.alibaba.cloud.seata.Global
spring-cloud-starter-alibaba-seata
- io.seata
+ org.apache.seata
seata-spring-boot-starter
@@ -117,7 +117,7 @@ Note: It is recommended to allocate 2G of heap memory and 1G of off-heap memory.
0.9.0: support.spring.datasource.autoproxy=true
```
If XA mode is used, `@EnableAutoDataSourceProxy(dataSourceProxyMode = "XA")`
-
+
- For manual configuration, please refer to the example below
```
@Primary
@@ -134,7 +134,7 @@ Note: It is recommended to allocate 2G of heap memory and 1G of off-heap memory.
- When using automatic proxy data sources, you need to adjust the configuration file if you use XA mode
application.properties
```
- seata.data-source-proxy-mode=XA
+ seata.data-source-proxy-mode=XA
```
application.yml
```
@@ -163,7 +163,7 @@ Note: It is recommended to allocate 2G of heap memory and 1G of off-heap memory.
txServiceGroup = applicationName + "-fescar-service-group";
this.seataProperties.setTxServiceGroup(txServiceGroup);
}
-
+
return new GlobalTransactionScanner(applicationName, txServiceGroup);
}
```
@@ -257,4 +257,4 @@ public void rollback(BusinessActionContext context) {
pointcut.setExpression("Configure pointcut expression to enable global transaction interceptor");
return new DefaultPointcutAdvisor(pointcut, aspectTransactionalInterceptor);
}
-```
\ No newline at end of file
+```
diff --git a/i18n/zh-cn/docusaurus-plugin-content-docs/version-v2.1/ops/deploy-guide-beginner.md b/i18n/zh-cn/docusaurus-plugin-content-docs/version-v2.1/ops/deploy-guide-beginner.md
index e171792d284..e9548249d3b 100644
--- a/i18n/zh-cn/docusaurus-plugin-content-docs/version-v2.1/ops/deploy-guide-beginner.md
+++ b/i18n/zh-cn/docusaurus-plugin-content-docs/version-v2.1/ops/deploy-guide-beginner.md
@@ -36,7 +36,7 @@ Seata分TC、TM和RM三个角色，TC（Server端）为单独服务端部署，T
```java
- io.seata
+ org.apache.seata
seata-spring-boot-starter
最新版
@@ -46,7 +46,7 @@ Seata分TC、TM和RM三个角色，TC（Server端）为单独服务端部署，T
最新版本
- io.seata
+ org.apache.seata
seata-spring-boot-starter
@@ -57,8 +57,8 @@ Seata分TC、TM和RM三个角色，TC（Server端）为单独服务端部署，T
### 启动Server
-Server端存储模式（store.mode）现有file、db、redis、raft，file模式无需改动，直接启动即可,raft部署方式请访问[专门部署文档](/docs/ops/deploy-server-raft/)，下面专门讲下db和redis启动步骤。
-注： file模式为单机模式，全局事务会话信息内存中读写并异步(默认)持久化本地文件root.data，性能较高;
+Server端存储模式（store.mode）现有file、db、redis、raft，file模式无需改动，直接启动即可,raft部署方式请访问[专门部署文档](/docs/ops/deploy-server-raft/)，下面专门讲下db和redis启动步骤。
+注： file模式为单机模式，全局事务会话信息内存中读写并异步(默认)持久化本地文件root.data，性能较高;
db模式为高可用模式，全局事务会话信息通过db共享，相应性能差些;
@@ -73,18 +73,18 @@ redis模式Seata-Server 1.3及以上版本支持,性能较高,存在事务信息
#### 步骤三：修改store.mode
-启动包: seata-->conf-->application.yml，修改store.mode="db或者redis"
+启动包: seata-->conf-->application.yml，修改store.mode="db或者redis"
源码: 根目录-->seata-server-->resources-->application.yml，修改store.mode="db或者redis"
#### 步骤四：修改数据库连接|redis属性配置
-启动包: seata-->conf-->application.example.yml中附带额外配置，将其db|redis相关配置复制至application.yml,进行修改store.db或store.redis相关属性。
-源码: 根目录-->seata-server-->resources-->application.example.yml中附带额外配置，将其db/redis相关配置复制至application.yml,进行修改store.db或store.redis相关属性。
+启动包: seata-->conf-->application.example.yml中附带额外配置，将其db|redis相关配置复制至application.yml,进行修改store.db或store.redis相关属性。
+源码: 根目录-->seata-server-->resources-->application.example.yml中附带额外配置，将其db/redis相关配置复制至application.yml,进行修改store.db或store.redis相关属性。
#### 步骤五：启动
-- 源码启动: 执行ServerApplication.java的main方法
+- 源码启动: 执行ServerApplication.java的main方法
- 命令启动: seata-server.sh -h 127.0.0.1 -p 8091 -m db
注: 堆内存建议分配2G，堆外内存1G
@@ -108,7 +108,7 @@ redis模式Seata-Server 1.3及以上版本支持,性能较高,存在事务信息
0.9.0: support.spring.datasource.autoproxy=true
```
如果采用XA模式，`@EnableAutoDataSourceProxy(dataSourceProxyMode = "XA")`
-
+
- 手动配置可参考下方的例子
```
@Primary
@@ -122,21 +122,21 @@ redis模式Seata-Server 1.3及以上版本支持,性能较高,存在事务信息
```
2. 如果使用seata-starter
- - 使用自动代理数据源时，如果使用XA模式还需要调整配置文件
+ - 使用自动代理数据源时，如果使用XA模式还需要调整配置文件
application.properties
```
- seata.data-source-proxy-mode=XA
+ seata.data-source-proxy-mode=XA
```
application.yml
```
seata:
data-source-proxy-mode: XA
```
-
- - 如何关闭seata-spring-boot-starter的数据源自动代理？
+
+ - 如何关闭seata-spring-boot-starter的数据源自动代理？
application.properties
```
- seata.enable-auto-data-source-proxy=false
+ seata.enable-auto-data-source-proxy=false
```
application.yml
```
@@ -144,7 +144,7 @@ redis模式Seata-Server 1.3及以上版本支持,性能较高,存在事务信息
enable-auto-data-source-proxy: false
```
-#### 步骤四：初始化GlobalTransactionScanner
+#### 步骤四：初始化GlobalTransactionScanner
- 手动
``` @Bean
@Bean
@@ -155,7 +155,7 @@ redis模式Seata-Server 1.3及以上版本支持,性能较高,存在事务信息
txServiceGroup = applicationName + "-fescar-service-group";
this.seataProperties.setTxServiceGroup(txServiceGroup);
}
-
+
return new GlobalTransactionScanner(applicationName, txServiceGroup);
}
```
diff --git a/i18n/zh-cn/docusaurus-plugin-content-docs/version-v2.2/ops/deploy-guide-beginner.md b/i18n/zh-cn/docusaurus-plugin-content-docs/version-v2.2/ops/deploy-guide-beginner.md
index e171792d284..e9548249d3b 100644
--- a/i18n/zh-cn/docusaurus-plugin-content-docs/version-v2.2/ops/deploy-guide-beginner.md
+++ b/i18n/zh-cn/docusaurus-plugin-content-docs/version-v2.2/ops/deploy-guide-beginner.md
@@ -36,7 +36,7 @@ Seata分TC、TM和RM三个角色，TC（Server端）为单独服务端部署，T
```java
- io.seata
+ org.apache.seata
seata-spring-boot-starter
最新版
@@ -46,7 +46,7 @@ Seata分TC、TM和RM三个角色，TC（Server端）为单独服务端部署，T
最新版本
- io.seata
+ org.apache.seata
seata-spring-boot-starter
@@ -57,8 +57,8 @@ Seata分TC、TM和RM三个角色，TC（Server端）为单独服务端部署，T
### 启动Server
-Server端存储模式（store.mode）现有file、db、redis、raft，file模式无需改动，直接启动即可,raft部署方式请访问[专门部署文档](/docs/ops/deploy-server-raft/)，下面专门讲下db和redis启动步骤。
-注： file模式为单机模式，全局事务会话信息内存中读写并异步(默认)持久化本地文件root.data，性能较高;
+Server端存储模式（store.mode）现有file、db、redis、raft，file模式无需改动，直接启动即可,raft部署方式请访问[专门部署文档](/docs/ops/deploy-server-raft/)，下面专门讲下db和redis启动步骤。
+注： file模式为单机模式，全局事务会话信息内存中读写并异步(默认)持久化本地文件root.data，性能较高;
db模式为高可用模式，全局事务会话信息通过db共享，相应性能差些;
@@ -73,18 +73,18 @@ redis模式Seata-Server 1.3及以上版本支持,性能较高,存在事务信息
#### 步骤三：修改store.mode
-启动包: seata-->conf-->application.yml，修改store.mode="db或者redis"
+启动包: seata-->conf-->application.yml，修改store.mode="db或者redis"
源码: 根目录-->seata-server-->resources-->application.yml，修改store.mode="db或者redis"
#### 步骤四：修改数据库连接|redis属性配置
-启动包: seata-->conf-->application.example.yml中附带额外配置，将其db|redis相关配置复制至application.yml,进行修改store.db或store.redis相关属性。
-源码: 根目录-->seata-server-->resources-->application.example.yml中附带额外配置，将其db/redis相关配置复制至application.yml,进行修改store.db或store.redis相关属性。
+启动包: seata-->conf-->application.example.yml中附带额外配置，将其db|redis相关配置复制至application.yml,进行修改store.db或store.redis相关属性。
+源码: 根目录-->seata-server-->resources-->application.example.yml中附带额外配置，将其db/redis相关配置复制至application.yml,进行修改store.db或store.redis相关属性。
#### 步骤五：启动
-- 源码启动: 执行ServerApplication.java的main方法
+- 源码启动: 执行ServerApplication.java的main方法
- 命令启动: seata-server.sh -h 127.0.0.1 -p 8091 -m db
注: 堆内存建议分配2G，堆外内存1G
@@ -108,7 +108,7 @@ redis模式Seata-Server 1.3及以上版本支持,性能较高,存在事务信息
0.9.0: support.spring.datasource.autoproxy=true
```
如果采用XA模式，`@EnableAutoDataSourceProxy(dataSourceProxyMode = "XA")`
-
+
- 手动配置可参考下方的例子
```
@Primary
@@ -122,21 +122,21 @@ redis模式Seata-Server 1.3及以上版本支持,性能较高,存在事务信息
```
2. 如果使用seata-starter
- - 使用自动代理数据源时，如果使用XA模式还需要调整配置文件
+ - 使用自动代理数据源时，如果使用XA模式还需要调整配置文件
application.properties
```
- seata.data-source-proxy-mode=XA
+ seata.data-source-proxy-mode=XA
```
application.yml
```
seata:
data-source-proxy-mode: XA
```
-
- - 如何关闭seata-spring-boot-starter的数据源自动代理？
+
+ - 如何关闭seata-spring-boot-starter的数据源自动代理？
application.properties
```
- seata.enable-auto-data-source-proxy=false
+ seata.enable-auto-data-source-proxy=false
```
application.yml
```
@@ -144,7 +144,7 @@ redis模式Seata-Server 1.3及以上版本支持,性能较高,存在事务信息
enable-auto-data-source-proxy: false
```
-#### 步骤四：初始化GlobalTransactionScanner
+#### 步骤四：初始化GlobalTransactionScanner
- 手动
``` @Bean
@Bean
@@ -155,7 +155,7 @@ redis模式Seata-Server 1.3及以上版本支持,性能较高,存在事务信息
txServiceGroup = applicationName + "-fescar-service-group";
this.seataProperties.setTxServiceGroup(txServiceGroup);
}
-
+
return new GlobalTransactionScanner(applicationName, txServiceGroup);
}
```