From 9237cce69b7ddc4ecfd816b6f787fcf41ace849b Mon Sep 17 00:00:00 2001 From: Leto_b Date: Mon, 23 Jun 2025 10:50:54 +0800 Subject: [PATCH 1/2] add sink.batch.max-delay-ms --- src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md | 2 ++ src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md | 2 ++ src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md | 2 ++ src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md | 2 ++ src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md | 2 ++ src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md | 2 ++ src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md | 2 ++ src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md | 2 ++ 8 files changed, 16 insertions(+) diff --git a/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md b/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md index 819b6d12b..3407cb855 100644 --- a/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md +++ b/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md @@ -539,6 +539,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | @@ -557,6 +558,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | diff --git a/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md b/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md index ced6d0af9..fdc73f2a7 100644 --- a/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md +++ b/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md @@ -589,6 +589,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | @@ -620,6 +621,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | diff --git a/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md b/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md index 819b6d12b..3407cb855 100644 --- a/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md +++ b/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md @@ -539,6 +539,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | @@ -557,6 +558,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | diff --git a/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md b/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md index ced6d0af9..fdc73f2a7 100644 --- a/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md +++ b/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md @@ -589,6 +589,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | @@ -620,6 +621,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | diff --git a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md index 74f178d87..6199ba7e3 100644 --- a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md +++ b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md @@ -530,6 +530,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | @@ -548,6 +549,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | diff --git a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md index 2bb086709..91338ff7a 100644 --- a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md +++ b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md @@ -583,6 +583,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | @@ -615,6 +616,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | diff --git a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md index 74f178d87..6199ba7e3 100644 --- a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md +++ b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md @@ -530,6 +530,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | @@ -548,6 +549,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | diff --git a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md index 2bb086709..91338ff7a 100644 --- a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md +++ b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md @@ -583,6 +583,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | @@ -615,6 +616,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | From 49f478d9728397fbf4167dfdd91e61fa18e5dcde Mon Sep 17 00:00:00 2001 From: Leto_b Date: Fri, 25 Jul 2025 16:18:19 +0800 Subject: [PATCH 2/2] add version --- .../Table/User-Manual/Data-Sync_apache.md | 4 +-- .../Table/User-Manual/Data-Sync_timecho.md | 4 +-- .../Tree/User-Manual/Data-Sync_apache.md | 34 ++++++++++--------- .../Tree/User-Manual/Data-Sync_timecho.md | 32 +++++++++-------- .../User-Manual/Data-Sync_apache.md | 4 +-- .../User-Manual/Data-Sync_timecho.md | 6 ++-- .../latest/User-Manual/Data-Sync_apache.md | 34 ++++++++++--------- .../latest/User-Manual/Data-Sync_timecho.md | 32 +++++++++-------- .../Table/User-Manual/Data-Sync_apache.md | 4 +-- .../Table/User-Manual/Data-Sync_timecho.md | 4 +-- .../Tree/User-Manual/Data-Sync_apache.md | 34 ++++++++++--------- .../Tree/User-Manual/Data-Sync_timecho.md | 34 ++++++++++--------- .../User-Manual/Data-Sync_apache.md | 4 +-- .../User-Manual/Data-Sync_timecho.md | 4 +-- .../latest/User-Manual/Data-Sync_apache.md | 34 ++++++++++--------- .../latest/User-Manual/Data-Sync_timecho.md | 34 ++++++++++--------- 16 files changed, 159 insertions(+), 143 deletions(-) diff --git a/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md b/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md index 3407cb855..cf8515fc5 100644 --- a/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md +++ b/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md @@ -539,7 +539,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | @@ -558,7 +558,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | diff --git a/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md b/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md index fdc73f2a7..dfce0e3b4 100644 --- a/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md +++ b/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md @@ -589,7 +589,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | @@ -621,7 +621,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | diff --git a/src/UserGuide/Master/Tree/User-Manual/Data-Sync_apache.md b/src/UserGuide/Master/Tree/User-Manual/Data-Sync_apache.md index 696832a20..727c82287 100644 --- a/src/UserGuide/Master/Tree/User-Manual/Data-Sync_apache.md +++ b/src/UserGuide/Master/Tree/User-Manual/Data-Sync_apache.md @@ -511,22 +511,24 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-sink -| key | value | value Range | required or not | Default Value | -| :--------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :----------- | -| sink | iotdb-thrift-sink or iotdb-thrift-async-sink | String: iotdb-thrift-sink or iotdb-thrift-async-sink | Required | | -| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | -| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | -| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | -| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | +| key | value | value Range | required or not | Default Value | +|:--------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------| :----------------------------------------------------------- | :------- | :----------- | +| sink | iotdb-thrift-sink or iotdb-thrift-async-sink | String: iotdb-thrift-sink or iotdb-thrift-async-sink | Required | | +| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | +| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | +| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | #### iotdb-thrift-ssl-sink -| key | value | value Range | required or not | Default Value | -| :---------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :----------- | -| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | Required | - | -| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | -| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | -| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | -| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | -| ssl.trust-store-path | The trust store certificate path required to connect to the target DataNode | String: certificate directory name, when configured as a relative directory, it is relative to the IoTDB root directory. Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667'| Required | - | -| ssl.trust-store-pwd | The trust store certificate password required to connect to the target DataNode | Integer | Required | - | +| key | value | value Range | required or not | Default Value | +|:------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------| :----------------------------------------------------------- | :------- | :----------- | +| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | Required | - | +| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | +| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | +| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | +| ssl.trust-store-path | The trust store certificate path required to connect to the target DataNode | String: certificate directory name, when configured as a relative directory, it is relative to the IoTDB root directory. Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667'| Required | - | +| ssl.trust-store-pwd | The trust store certificate password required to connect to the target DataNode | Integer | Required | - | diff --git a/src/UserGuide/Master/Tree/User-Manual/Data-Sync_timecho.md b/src/UserGuide/Master/Tree/User-Manual/Data-Sync_timecho.md index 280980344..dc8eb6562 100644 --- a/src/UserGuide/Master/Tree/User-Manual/Data-Sync_timecho.md +++ b/src/UserGuide/Master/Tree/User-Manual/Data-Sync_timecho.md @@ -597,13 +597,14 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-sink -| key | value | value Range | required or not | Default Value | -| :--------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :----------- | -| sink | iotdb-thrift-sink or iotdb-thrift-async-sink | String: iotdb-thrift-sink or iotdb-thrift-async-sink | Required | | +| key | value | value Range | required or not | Default Value | +|:------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------| :----------------------------------------------------------- | :------- | :----------- | +| sink | iotdb-thrift-sink or iotdb-thrift-async-sink | String: iotdb-thrift-sink or iotdb-thrift-async-sink | Required | | | node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | -| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | -| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | -| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | +| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | +| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | #### iotdb-air-gap-sink @@ -615,12 +616,13 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-ssl-sink -| key | value | value Range | required or not | Default Value | -| :---------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :----------- | -| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | Required | - | -| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | -| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | -| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | -| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | -| ssl.trust-store-path | The trust store certificate path required to connect to the target DataNode | String: certificate directory name, when configured as a relative directory, it is relative to the IoTDB root directory. Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667'| Required | - | -| ssl.trust-store-pwd | The trust store certificate password required to connect to the target DataNode | Integer | Required | - | +| key | value | value Range | required or not | Default Value | +|:------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------| :----------------------------------------------------------- | :------- | :----------- | +| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | Required | - | +| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | +| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | +| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | +| ssl.trust-store-path | The trust store certificate path required to connect to the target DataNode | String: certificate directory name, when configured as a relative directory, it is relative to the IoTDB root directory. Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667'| Required | - | +| ssl.trust-store-pwd | The trust store certificate password required to connect to the target DataNode | Integer | Required | - | diff --git a/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md b/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md index 3407cb855..cf8515fc5 100644 --- a/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md +++ b/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md @@ -539,7 +539,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | @@ -558,7 +558,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | diff --git a/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md b/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md index fdc73f2a7..fd9c2b483 100644 --- a/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md +++ b/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md @@ -589,12 +589,12 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | | rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | -| load-tsfile-strategy | When synchronizing file data, ​​whether the receiver waits for the local load tsfile operation to complete before responding to the sender​​:
​​sync​​: Wait for the local load tsfile operation to complete before returning the response.
​​async​​: Do not wait for the local load tsfile operation to complete; return the response immediately. | String: sync / async | No | sync | +| load-tsfile-strategy | When synchronizing file data, ​​whether the receiver waits for the local load tsfile operation to complete before responding to the sender​​:
​​sync​​: Wait for the local load tsfile operation to complete before returning the response.
​​async​​: Do not wait for the local load tsfile operation to complete; return the response immediately. | String: sync / async | No | sync | | format | The payload formats for data transmission include the following options:
- hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.
- tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.
- tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization when the sender and receiver have incompatible data types (to minimize errors). | String: hybrid / tsfile / tablet | No | hybrid | #### iotdb-air-gap-sink @@ -621,7 +621,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | diff --git a/src/UserGuide/latest/User-Manual/Data-Sync_apache.md b/src/UserGuide/latest/User-Manual/Data-Sync_apache.md index 696832a20..49db3211c 100644 --- a/src/UserGuide/latest/User-Manual/Data-Sync_apache.md +++ b/src/UserGuide/latest/User-Manual/Data-Sync_apache.md @@ -511,22 +511,24 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-sink -| key | value | value Range | required or not | Default Value | -| :--------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :----------- | -| sink | iotdb-thrift-sink or iotdb-thrift-async-sink | String: iotdb-thrift-sink or iotdb-thrift-async-sink | Required | | -| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | -| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | -| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | -| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | +| key | value | value Range | required or not | Default Value | +|:-------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------| :----------------------------------------------------------- | :------- | :----------- | +| sink | iotdb-thrift-sink or iotdb-thrift-async-sink | String: iotdb-thrift-sink or iotdb-thrift-async-sink | Required | | +| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | +| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | +| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | #### iotdb-thrift-ssl-sink -| key | value | value Range | required or not | Default Value | -| :---------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :----------- | -| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | Required | - | -| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | -| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | -| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | -| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | -| ssl.trust-store-path | The trust store certificate path required to connect to the target DataNode | String: certificate directory name, when configured as a relative directory, it is relative to the IoTDB root directory. Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667'| Required | - | -| ssl.trust-store-pwd | The trust store certificate password required to connect to the target DataNode | Integer | Required | - | +| key | value | value Range | required or not | Default Value | +|:--------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------| :----------------------------------------------------------- | :------- | :----------- | +| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | Required | - | +| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | +| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | +| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | +| ssl.trust-store-path | The trust store certificate path required to connect to the target DataNode | String: certificate directory name, when configured as a relative directory, it is relative to the IoTDB root directory. Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667'| Required | - | +| ssl.trust-store-pwd | The trust store certificate password required to connect to the target DataNode | Integer | Required | - | diff --git a/src/UserGuide/latest/User-Manual/Data-Sync_timecho.md b/src/UserGuide/latest/User-Manual/Data-Sync_timecho.md index 280980344..beabe2684 100644 --- a/src/UserGuide/latest/User-Manual/Data-Sync_timecho.md +++ b/src/UserGuide/latest/User-Manual/Data-Sync_timecho.md @@ -597,13 +597,14 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-sink -| key | value | value Range | required or not | Default Value | -| :--------------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :----------- | -| sink | iotdb-thrift-sink or iotdb-thrift-async-sink | String: iotdb-thrift-sink or iotdb-thrift-async-sink | Required | | +| key | value | value Range | required or not | Default Value | +|:------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------| :----------------------------------------------------------- | :------- | :----------- | +| sink | iotdb-thrift-sink or iotdb-thrift-async-sink | String: iotdb-thrift-sink or iotdb-thrift-async-sink | Required | | | node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | -| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | -| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | -| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | +| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | +| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | #### iotdb-air-gap-sink @@ -615,12 +616,13 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-ssl-sink -| key | value | value Range | required or not | Default Value | -| :---------------------- | :----------------------------------------------------------- | :----------------------------------------------------------- | :------- | :----------- | -| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | Required | - | -| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | -| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | -| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | -| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | -| ssl.trust-store-path | The trust store certificate path required to connect to the target DataNode | String: certificate directory name, when configured as a relative directory, it is relative to the IoTDB root directory. Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667'| Required | - | -| ssl.trust-store-pwd | The trust store certificate password required to connect to the target DataNode | Integer | Required | - | +| key | value | value Range | required or not | Default Value | +|:---------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------| :----------------------------------------------------------- | :------- | :----------- | +| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | Required | - | +| node-urls | The URL of the data service port of any DataNode nodes on the target IoTDB (please note that synchronization tasks do not support forwarding to its own service) | String. Example: '127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Required | - | +| batch.enable | Whether to enable batched log transmission mode to improve transmission throughput and reduce IOPS | Boolean: true, false | Optional | true | +| batch.max-delay-seconds | Effective when batched log transmission mode is enabled, it represents the maximum waiting time for a batch of data before sending (unit: s) | Integer | Optional | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.size-bytes | Effective when batched log transmission mode is enabled, it represents the maximum batch size for a batch of data (unit: byte) | Long | Optional | 16*1024*1024 | +| ssl.trust-store-path | The trust store certificate path required to connect to the target DataNode | String: certificate directory name, when configured as a relative directory, it is relative to the IoTDB root directory. Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667'| Required | - | +| ssl.trust-store-pwd | The trust store certificate password required to connect to the target DataNode | Integer | Required | - | diff --git a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md index 6199ba7e3..8d39c713a 100644 --- a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md +++ b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md @@ -530,7 +530,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | @@ -549,7 +549,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | diff --git a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md index 91338ff7a..afa3b8d19 100644 --- a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md +++ b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md @@ -583,7 +583,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | @@ -616,7 +616,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | diff --git a/src/zh/UserGuide/Master/Tree/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/Master/Tree/User-Manual/Data-Sync_apache.md index ef41e2e37..7df2c57d0 100644 --- a/src/zh/UserGuide/Master/Tree/User-Manual/Data-Sync_apache.md +++ b/src/zh/UserGuide/Master/Tree/User-Manual/Data-Sync_apache.md @@ -506,24 +506,26 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-sink -| key | value | value 取值范围 | 是否必填 | 默认取值 | -| ----------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- | ------------ | -| sink | iotdb-thrift-sink 或 iotdb-thrift-async-sink | String: iotdb-thrift-sink 或 iotdb-thrift-async-sink | 必填 | - | -| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | -| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | -| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | +| key | value | value 取值范围 | 是否必填 | 默认取值 | +|--------------------------|-------------------------------------------------------------| ------------------------------------------------------------ | -------- | ------------ | +| sink | iotdb-thrift-sink 或 iotdb-thrift-async-sink | String: iotdb-thrift-sink 或 iotdb-thrift-async-sink | 必填 | - | +| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | +| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | +| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | #### iotdb-thrift-ssl-sink -| key | value | value 取值范围 | 是否必填 | 默认取值 | -| ----------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- | ------------ | -| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | 必填 | - | -| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | -| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | -| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | -| ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | -| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | +| key | value | value 取值范围 | 是否必填 | 默认取值 | +|---------------------------|--------------------------------------------------------------------| ------------------------------------------------------------ | -------- | ------------ | +| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | 必填 | - | +| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | +| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | +| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | +| ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | +| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | diff --git a/src/zh/UserGuide/Master/Tree/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/Master/Tree/User-Manual/Data-Sync_timecho.md index 66e4a73d9..29baef4f5 100644 --- a/src/zh/UserGuide/Master/Tree/User-Manual/Data-Sync_timecho.md +++ b/src/zh/UserGuide/Master/Tree/User-Manual/Data-Sync_timecho.md @@ -592,13 +592,14 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-sink -| key | value | value 取值范围 | 是否必填 | 默认取值 | -| ----------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- | ------------ | -| sink | iotdb-thrift-sink 或 iotdb-thrift-async-sink | String: iotdb-thrift-sink 或 iotdb-thrift-async-sink | 必填 | - | -| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | -| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | -| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | +| key | value | value 取值范围 | 是否必填 | 默认取值 | +|--------------------------|-------------------------------------------------------------| ------------------------------------------------------------ | -------- | ------------ | +| sink | iotdb-thrift-sink 或 iotdb-thrift-async-sink | String: iotdb-thrift-sink 或 iotdb-thrift-async-sink | 必填 | - | +| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | +| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | +| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | #### iotdb-air-gap-sink @@ -610,12 +611,13 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-ssl-sink -| key | value | value 取值范围 | 是否必填 | 默认取值 | -| ----------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- | ------------ | -| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | 必填 | - | -| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | -| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | -| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | -| ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | -| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | +| key | value | value 取值范围 | 是否必填 | 默认取值 | +|-------------------------|---------------------------------------------------------------| ------------------------------------------------------------ | -------- | ------------ | +| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | 必填 | - | +| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | +| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | +| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | +| ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | +| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | diff --git a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md index 6199ba7e3..3c3833924 100644 --- a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md +++ b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md @@ -530,7 +530,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） (V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | @@ -549,7 +549,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | diff --git a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md index 91338ff7a..b39c5a988 100644 --- a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md +++ b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md @@ -583,7 +583,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | @@ -616,7 +616,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | diff --git a/src/zh/UserGuide/latest/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/latest/User-Manual/Data-Sync_apache.md index ef41e2e37..f64a8c207 100644 --- a/src/zh/UserGuide/latest/User-Manual/Data-Sync_apache.md +++ b/src/zh/UserGuide/latest/User-Manual/Data-Sync_apache.md @@ -506,24 +506,26 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-sink -| key | value | value 取值范围 | 是否必填 | 默认取值 | -| ----------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- | ------------ | -| sink | iotdb-thrift-sink 或 iotdb-thrift-async-sink | String: iotdb-thrift-sink 或 iotdb-thrift-async-sink | 必填 | - | -| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | -| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | -| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | +| key | value | value 取值范围 | 是否必填 | 默认取值 | +|--------------------------|------------------------------------------------------------------------------------------------------------------------| ------------------------------------------------------------ | -------- | ------------ | +| sink | iotdb-thrift-sink 或 iotdb-thrift-async-sink | String: iotdb-thrift-sink 或 iotdb-thrift-async-sink | 必填 | - | +| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | +| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | +| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | #### iotdb-thrift-ssl-sink -| key | value | value 取值范围 | 是否必填 | 默认取值 | -| ----------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- | ------------ | -| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | 必填 | - | -| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | -| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | -| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | -| ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | -| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | +| key | value | value 取值范围 | 是否必填 | 默认取值 | +|--------------------------|------------------------------------------------------------------------------| ------------------------------------------------------------ | -------- | ------------ | +| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | 必填 | - | +| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | +| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | +| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | +| ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | +| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | diff --git a/src/zh/UserGuide/latest/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/latest/User-Manual/Data-Sync_timecho.md index 66e4a73d9..1d1930fca 100644 --- a/src/zh/UserGuide/latest/User-Manual/Data-Sync_timecho.md +++ b/src/zh/UserGuide/latest/User-Manual/Data-Sync_timecho.md @@ -592,13 +592,14 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-sink -| key | value | value 取值范围 | 是否必填 | 默认取值 | -| ----------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- | ------------ | -| sink | iotdb-thrift-sink 或 iotdb-thrift-async-sink | String: iotdb-thrift-sink 或 iotdb-thrift-async-sink | 必填 | - | -| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | -| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | -| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | +| key | value | value 取值范围 | 是否必填 | 默认取值 | +|---------------------------|----------------------------------------------------------------------| ------------------------------------------------------------ | -------- | ------------ | +| sink | iotdb-thrift-sink 或 iotdb-thrift-async-sink | String: iotdb-thrift-sink 或 iotdb-thrift-async-sink | 必填 | - | +| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | +| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | +| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | #### iotdb-air-gap-sink @@ -610,12 +611,13 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-ssl-sink -| key | value | value 取值范围 | 是否必填 | 默认取值 | -| ----------------------- | ------------------------------------------------------------ | ------------------------------------------------------------ | -------- | ------------ | -| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | 必填 | - | -| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | -| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | -| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | -| ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | -| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | +| key | value | value 取值范围 | 是否必填 | 默认取值 | +|--------------------------|---------------------------------------------------------------| ------------------------------------------------------------ | -------- | ------------ | +| sink | iotdb-thrift-ssl-sink | String: iotdb-thrift-ssl-sink | 必填 | - | +| node-urls | 目标端 IoTDB 任意多个 DataNode 节点的数据服务端口的 url（请注意同步任务不支持向自身服务进行转发） | String. 例：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | 必填 | - | +| batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | +| batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | +| ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | +| ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - |