diff --git a/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md b/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md index 9f49fff35..96141ff13 100644 --- a/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md +++ b/src/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md @@ -503,7 +503,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | @@ -522,7 +522,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | diff --git a/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md b/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md index 861a30e47..b75ebccfa 100644 --- a/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md +++ b/src/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md @@ -580,21 +580,23 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 #### iotdb-thrift-sink -| **Parameter** | **Description** | Value Range | Required | Default Value | -|:----------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|:---------------------------------------------------------------------------------| :------- |:---------------------------------------------| -| sink | iotdb-thrift-sink or iotdb-thrift-async-sink | String: iotdb-thrift-sink or iotdb-thrift-async-sink | Yes | - | -| node-urls | URLs of the DataNode service ports on the target IoTDB. (please note that the synchronization task does not support forwarding to its own service). | String. Example：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Yes | - | -| user/username | username for connecting to the target IoTDB. Must have appropriate permissions. | String | No | root | -| password | Password for the username. | String | No | TimechoDB@2021 (Before V2.0.6.x it is root) | -| batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | -| batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) | Integer | No | 1 | -| batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | -| compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | -| compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | -| rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | -| load-tsfile-strategy | When synchronizing file data, ​​whether the receiver waits for the local load tsfile operation to complete before responding to the sender​​:
​​sync​​: Wait for the local load tsfile operation to complete before returning the response.
​​async​​: Do not wait for the local load tsfile operation to complete; return the response immediately. | String: sync / async | No | sync | -| format | The payload formats for data transmission include the following options:
- hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.
- tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.
- tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization when the sender and receiver have incompatible data types (to minimize errors). | String: hybrid / tsfile / tablet | No | hybrid | + +| **Parameter** | **Description** | Value Range | Required | Default Value | +|:----------------------------|:------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|:---------------------------------------------------------------------------------| :------- | :------------ | +| sink | iotdb-thrift-sink or iotdb-thrift-async-sink | String: iotdb-thrift-sink or iotdb-thrift-async-sink | Yes | - | +| node-urls | URLs of the DataNode service ports on the target IoTDB. (please note that the synchronization task does not support forwarding to its own service). | String. Example：'127.0.0.1：6667，127.0.0.1：6668，127.0.0.1：6669'， '127.0.0.1：6667' | Yes | - | +| user/usename | Usename for connecting to the target IoTDB. Must have appropriate permissions. | String | No | root | +| password | Password for the username. | String | No | root | +| batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | +| batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) | Integer | No | 1 | +| batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | +| compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | +| compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | +| rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | +| load-tsfile-strategy | When synchronizing file data, ​​whether the receiver waits for the local load tsfile operation to complete before responding to the sender​​:
​​sync​​: Wait for the local load tsfile operation to complete before returning the response.
​​async​​: Do not wait for the local load tsfile operation to complete; return the response immediately. | String: sync / async | No | sync | +| format | The payload formats for data transmission include the following options:
- hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.
- tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.
- tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization when the sender and receiver have incompatible data types (to minimize errors). | String: hybrid / tsfile / tablet | No | hybrid | +| mark-as-general-write-request | This parameter controls whether data forwarded by external pipes can be synchronized between dual-active pipes (configured on the sender side of dual-active external pipes). (Available since v2.0.5) | Boolean: true / false. True: can synchronize; False: cannot synchronize; | Optional | False | #### iotdb-air-gap-sink @@ -630,6 +632,8 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | ssl.trust-store-path | Path to the trust store certificate for SSL connection. | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | Yes | - | | ssl.trust-store-pwd | Password for the trust store certificate. | Integer | Yes | - | | format | The payload formats for data transmission include the following options:
- hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.
- tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.
- tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization when the sender and receiver have incompatible data types (to minimize errors). | String: hybrid / tsfile / tablet | No | hybrid | +| mark-as-general-write-request | This parameter controls whether data forwarded by external pipes can be synchronized between dual-active pipes (configured on the sender side of dual-active external pipes).(Available since v2.0.5) | Boolean: true / false. True: can synchronize; False: cannot synchronize; | Optional | False | + #### write-back-sink diff --git a/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md b/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md index ce3acc797..0f88e1b34 100644 --- a/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md +++ b/src/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md @@ -503,7 +503,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | @@ -522,7 +522,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | Password for the username. | String | No | root | | batch.enable | Enables batch mode for log transmission to improve throughput and reduce IOPS. | Boolean: true, false | No | true | | batch.max-delay-seconds | Maximum delay (in seconds) for batch transmission. | Integer | No | 1 | -| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5.1) | Integer | No | 1 | +| batch.max-delay-ms | Maximum delay (in ms) for batch transmission. (Available since v2.0.5) | Integer | No | 1 | | batch.size-bytes | Maximum batch size (in bytes) for batch transmission. | Long | No | 16*1024*1024 | | compressor | The selected RPC compression algorithm. Multiple algorithms can be configured and will be adopted in sequence for each request. | String: snappy / gzip / lz4 / zstd / lzma2 | No | "" | | compressor.zstd.level | When the selected RPC compression algorithm is zstd, this parameter can be used to additionally configure the compression level of the zstd algorithm. | Int: [-131072, 22] | No | 3 | diff --git a/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md b/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md index 4a0e0bb69..cc7635c0c 100644 --- a/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md +++ b/src/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md @@ -595,6 +595,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | rate-limit-bytes-per-second | The maximum number of bytes allowed to be transmitted per second. The compressed bytes (such as after compression) are calculated. If it is less than 0, there is no limit. | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | No | -1 | | load-tsfile-strategy | When synchronizing file data, ​​whether the receiver waits for the local load tsfile operation to complete before responding to the sender​​:
​​sync​​: Wait for the local load tsfile operation to complete before returning the response.
​​async​​: Do not wait for the local load tsfile operation to complete; return the response immediately. | String: sync / async | No | sync | | format | The payload formats for data transmission include the following options:
- hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.
- tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.
- tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization when the sender and receiver have incompatible data types (to minimize errors). | String: hybrid / tsfile / tablet | No | hybrid | +| mark-as-general-write-request | This parameter controls whether data forwarded by external pipes can be synchronized between dual-active pipes (configured on the sender side of dual-active external pipes). | Boolean: true / false. True: can synchronize; False: cannot synchronize; | Optional | False | #### iotdb-air-gap-sink @@ -629,6 +630,8 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | ssl.trust-store-path | Path to the trust store certificate for SSL connection. | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | Yes | - | | ssl.trust-store-pwd | Password for the trust store certificate. | Integer | Yes | - | | format | The payload formats for data transmission include the following options:
- hybrid: The format depends on what is passed from the processor (either tsfile or tablet), and the sink performs no conversion.
- tsfile: Data is forcibly converted to tsfile format before transmission. This is suitable for scenarios like data file backup.
- tablet: Data is forcibly converted to tsfile format before transmission. This is useful for data synchronization when the sender and receiver have incompatible data types (to minimize errors). | String: hybrid / tsfile / tablet | No | hybrid | +| mark-as-general-write-request | This parameter controls whether data forwarded by external pipes can be synchronized between dual-active pipes (configured on the sender side of dual-active external pipes).(Available since v2.0.5) | Boolean: true / false. True: can synchronize; False: cannot synchronize; | Optional | False | + #### write-back-sink diff --git a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md index a328e2f75..bdeccdb10 100644 --- a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md +++ b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_apache.md @@ -493,7 +493,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | @@ -512,7 +512,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | diff --git a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md index 2f522b8f1..db225e092 100644 --- a/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md +++ b/src/zh/UserGuide/Master/Table/User-Manual/Data-Sync_timecho.md @@ -588,6 +588,8 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | rate-limit-bytes-per-second | 每秒最大允许传输的 byte 数，计算压缩后的 byte（如压缩），若小于 0 则不限制 | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | 选填 | -1 | | load-tsfile-strategy | 文件同步数据时，接收端请求返回发送端前，是否等待接收端本地的 load tsfile 执行结果返回。
sync：等待本地的 load tsfile 执行结果返回；
async：不等待本地的 load tsfile 执行结果返回。 | String: sync / async | 选填 | sync | | format | 数据传输的payload格式， 可选项包括：
- hybrid： 取决于 processor 传递过来的格式（tsfile或tablet），sink不做任何转换。
- tsfile：强制转换成tsfile发送，可用于数据文件备份等场景。
- tablet：强制转换成tsfile发送，可用于发送端/接收端数据类型不完全兼容时的数据同步（以减少报错）。 | String: hybrid / tsfile / tablet | 选填 | hybrid | +| mark-as-general-write-request | 该参数可控制双活 pipe 之间能否同步外部 pipe 转发的数据（配置到双活外部 pipe 的发送端）(V2.0.5及以后版本支持） | Boolean: true / false。True：能同步；False：不能同步； | 选填 | False | + #### iotdb-air-gap-sink @@ -623,6 +625,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | | ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | | format | 数据传输的payload格式， 可选项包括：
- hybrid： 取决于 processor 传递过来的格式（tsfile或tablet），sink不做任何转换。
- tsfile：强制转换成tsfile发送，可用于数据文件备份等场景。
- tablet：强制转换成tsfile发送，可用于发送端/接收端数据类型不完全兼容时的数据同步（以减少报错）。 | String: hybrid / tsfile / tablet | 选填 | hybrid | +| mark-as-general-write-request | 该参数可控制双活 pipe 之间能否同步外部 pipe 转发的数据（配置到双活外部 pipe 的发送端） | Boolean: true / false。True：能同步；False：不能同步； | 选填 | False | #### write-back-sink diff --git a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md index 8eeac6d23..f42ef1c26 100644 --- a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md +++ b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_apache.md @@ -493,7 +493,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） (V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms） (V2.0.5及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | @@ -512,7 +512,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | password | 连接接收端使用的用户名对应的密码，同步要求该用户具备相应的操作权限 | String | 选填 | root | | batch.enable | 是否开启日志攒批发送模式，用于提高传输吞吐，降低 IOPS | Boolean: true, false | 选填 | true | | batch.max-delay-seconds | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：s） | Integer | 选填 | 1 | -| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5.1及以后版本支持） | Integer | 选填 | 1 | +| batch.max-delay-ms | 在开启日志攒批发送模式时生效，表示一批数据在发送前的最长等待时间（单位：ms）(V2.0.5及以后版本支持） | Integer | 选填 | 1 | | batch.size-bytes | 在开启日志攒批发送模式时生效，表示一批数据最大的攒批大小（单位：byte） | Long | 选填 | 16*1024*1024 | | compressor | 所选取的 rpc 压缩算法，可配置多个，对每个请求顺序采用 | String: snappy / gzip / lz4 / zstd / lzma2 | 选填 | "" | | compressor.zstd.level | 所选取的 rpc 压缩算法为 zstd 时，可使用该参数额外配置 zstd 算法的压缩等级 | Int: [-131072, 22] | 选填 | 3 | diff --git a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md index c49046c90..2a5cd4d35 100644 --- a/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md +++ b/src/zh/UserGuide/latest-Table/User-Manual/Data-Sync_timecho.md @@ -589,6 +589,8 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | rate-limit-bytes-per-second | 每秒最大允许传输的 byte 数，计算压缩后的 byte（如压缩），若小于 0 则不限制 | Double: [Double.MIN_VALUE, Double.MAX_VALUE] | 选填 | -1 | | load-tsfile-strategy | 文件同步数据时，接收端请求返回发送端前，是否等待接收端本地的 load tsfile 执行结果返回。
sync：等待本地的 load tsfile 执行结果返回；
async：不等待本地的 load tsfile 执行结果返回。 | String: sync / async | 选填 | sync | | format | 数据传输的payload格式， 可选项包括：
- hybrid： 取决于 processor 传递过来的格式（tsfile或tablet），sink不做任何转换。
- tsfile：强制转换成tsfile发送，可用于数据文件备份等场景。
- tablet：强制转换成tsfile发送，可用于发送端/接收端数据类型不完全兼容时的数据同步（以减少报错）。 | String: hybrid / tsfile / tablet | 选填 | hybrid | +| mark-as-general-write-request | 该参数可控制双活 pipe 之间能否同步外部 pipe 转发的数据（配置到双活外部 pipe 的发送端）(V2.0.5及以后版本支持） | Boolean: true / false。True：能同步；False：不能同步； | 选填 | False | + #### iotdb-air-gap-sink @@ -624,6 +626,7 @@ pipe_all_sinks_rate_limit_bytes_per_second=-1 | ssl.trust-store-path | 连接目标端 DataNode 所需的 trust store 证书路径 | String.Example: '127.0.0.1:6667,127.0.0.1:6668,127.0.0.1:6669', '127.0.0.1:6667' | 必填 | - | | ssl.trust-store-pwd | 连接目标端 DataNode 所需的 trust store 证书密码 | Integer | 必填 | - | | format | 数据传输的payload格式， 可选项包括：
- hybrid： 取决于 processor 传递过来的格式（tsfile或tablet），sink不做任何转换。
- tsfile：强制转换成tsfile发送，可用于数据文件备份等场景。
- tablet：强制转换成tsfile发送，可用于发送端/接收端数据类型不完全兼容时的数据同步（以减少报错）。 | String: hybrid / tsfile / tablet | 选填 | hybrid | +| mark-as-general-write-request | 该参数可控制双活 pipe 之间能否同步外部 pipe 转发的数据（配置到双活外部 pipe 的发送端） | Boolean: true / false。True：能同步；False：不能同步； | 选填 | False | #### write-back-sink