diff --git a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md index 84351dd3f..35294d16b 100644 --- a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -122,16 +122,16 @@ Set the following parameters in `./conf/iotdb-system.properties`. Refer to `./co **DataNode Parameters**: -| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- |:----------------|:----------------------------------------------------------------------------------------------------------------| :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | **Note:** Ensure files are saved after editing. Tools like VSCode Remote do not save changes automatically. diff --git a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index 914354ac1..316938ebb 100644 --- a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -122,16 +122,16 @@ Set the following parameters in `./conf/iotdb-system.properties`. Refer to `./co **DataNode Parameters**: -| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- |:----------------|:----------------------------------------------------------------------------------------------------------------| :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | **Note:** Ensure files are saved after editing. Tools like VSCode Remote do not save changes automatically. diff --git a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index acde6ca97..af7b5e309 100644 --- a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -94,16 +94,16 @@ Set the following parameters in `conf/iotdb-system.properties`. Refer to `conf/i **DataNode Parameters**: -| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | 0.0.0.0 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- | :-------------- |:----------------------------------------------------------------------------------------------------------------| :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | ### 2.3 Start ConfigNode diff --git a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index 41fca6793..696896804 100644 --- a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -93,16 +93,16 @@ Set the following parameters in `conf/iotdb-system.properties`. Refer to `conf/i **DataNode Parameters**: -| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | 0.0.0.0 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- | :-------------- |:----------------------------------------------------------------------------------------------------------------| :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | ### 2.3 Start ConfigNode diff --git a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_apache.md index 92e78557b..c4e5d0879 100644 --- a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -120,16 +120,16 @@ Open the ConfigNode configuration file `./conf/iotdb-system.properties`， Set t Open DataNode Configuration File `./conf/iotdb-system.properties`,Set the following parameters: -| **Configuration** | **Description** | **Default** | **Recommended value** | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | Note | -| ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------------ | ------------- | ------------- | ------------- | ---------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 127.0.0.1 | Recommend using the **IPV4 address or hostname** of the server where it is located | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | -| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Restarting the service takes effect | -| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | iotdb-1 | iotdb-2 | iotdb-3 | Cannot be modified after initial startup | -| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | Cannot be modified after initial startup | -| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | 10740 | 10740 | 10740 | Cannot be modified after initial startup | -| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | Cannot be modified after initial startup | -| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | Cannot be modified after initial startup | -| dn_seed_config_node | The address of the ConfigNode that the node connects to when registering to join the cluster, i.e. `cn_internal-address: cn_internal_port` | 127.0.0.1:10710 | The first CongfigNode's cn_internal-address: cn_internal_port | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | Cannot be modified after initial startup | +| **Configuration** | **Description** | **Default** | **Recommended value** | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | Note | +| ------------------------------- | ------------------------------------------------------------ |-----------------|-----------------------------------------------------------------------------------------------------------------| ------------- | ------------- | ------------- | ---------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | +| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Restarting the service takes effect | +| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | iotdb-1 | iotdb-2 | iotdb-3 | Cannot be modified after initial startup | +| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | Cannot be modified after initial startup | +| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | 10740 | 10740 | 10740 | Cannot be modified after initial startup | +| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | Cannot be modified after initial startup | +| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | Cannot be modified after initial startup | +| dn_seed_config_node | The address of the ConfigNode that the node connects to when registering to join the cluster, i.e. `cn_internal-address: cn_internal_port` | 127.0.0.1:10710 | The first CongfigNode's cn_internal-address: cn_internal_port | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | Cannot be modified after initial startup | > ❗️Attention: Editors such as VSCode Remote do not have automatic configuration saving function. Please ensure that the modified files are saved persistently, otherwise the configuration items will not take effect diff --git a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index 12058f850..bb05b65b7 100644 --- a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -124,16 +124,16 @@ Set the following parameters in `./conf/iotdb-system.properties`. Refer to `./co #### DataNode Parameters -| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- |:----------------|:----------------------------------------------------------------------------------------------------------------| :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | **Note:** Ensure files are saved after editing. Tools like VSCode Remote do not save changes automatically. diff --git a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index 8d5f68571..f682982d9 100644 --- a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -90,16 +90,16 @@ Open the ConfigNode configuration file (./conf/iotdb-system. properties file) an Open the DataNode configuration file (./conf/iotdb-system. properties file) and set the following parameters: -| **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | -| :-----------------------------: | :----------------------------------------------------------: | :-------------: | :----------------------------------------------------------: | :--------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Restarting the service takes effect | -| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | -| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | -| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | -| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | Cannot be modified after initial startup | -| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | Cannot be modified after initial startup | -| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | Cannot be modified after initial startup | -| dn_seed_config_node | The ConfigNode address that the node connects to when registering to join the cluster, i.e. cn_internal-address: cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | Cannot be modified after initial startup | +| **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | +| :-----------------------------: | :----------------------------------------------------------: | :-------------: |:---------------------------------------------------------------------------------------------------------------:| :--------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Restarting the service takes effect | +| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | +| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | +| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | +| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | Cannot be modified after initial startup | +| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | Cannot be modified after initial startup | +| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | Cannot be modified after initial startup | +| dn_seed_config_node | The ConfigNode address that the node connects to when registering to join the cluster, i.e. cn_internal-address: cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | Cannot be modified after initial startup | > ❗️Attention: Editors such as VSCode Remote do not have automatic configuration saving function. Please ensure that the modified files are saved persistently, otherwise the configuration items will not take effect diff --git a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index 3a87d4ede..5bce501e4 100644 --- a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -93,16 +93,16 @@ Set the following parameters in `conf/iotdb-system.properties`. Refer to `conf/i **DataNode** **Parameters**: -| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | 0.0.0.0 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- | :-------------- |:----------------------------------------------------------------------------------------------------------------| :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | ### 2.3 Start ConfigNode diff --git a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_apache.md index bd32980e5..900a2a929 100644 --- a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -120,16 +120,16 @@ Open the ConfigNode configuration file `./conf/iotdb-system.properties`， Set t Open DataNode Configuration File `./conf/iotdb-system.properties`,Set the following parameters: -| **Configuration** | **Description** | **Default** | **Recommended value** | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | Note | -| ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------------ | ------------- | ------------- | ------------- | ---------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 127.0.0.1 | Recommend using the **IPV4 address or hostname** of the server where it is located | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | -| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Restarting the service takes effect | -| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | iotdb-1 | iotdb-2 | iotdb-3 | Cannot be modified after initial startup | -| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | Cannot be modified after initial startup | -| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | 10740 | 10740 | 10740 | Cannot be modified after initial startup | -| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | Cannot be modified after initial startup | -| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | Cannot be modified after initial startup | -| dn_seed_config_node | The address of the ConfigNode that the node connects to when registering to join the cluster, i.e. `cn_internal-address: cn_internal_port` | 127.0.0.1:10710 | The first CongfigNode's cn_internal-address: cn_internal_port | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | Cannot be modified after initial startup | +| **Configuration** | **Description** | **Default** | **Recommended value** | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | Note | +| ------------------------------- | ------------------------------------------------------------ |-----------------|-----------------------------------------------------------------------------------------------------------------| ------------- | ------------- | ------------- | ---------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | +| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Restarting the service takes effect | +| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | iotdb-1 | iotdb-2 | iotdb-3 | Cannot be modified after initial startup | +| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | Cannot be modified after initial startup | +| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | 10740 | 10740 | 10740 | Cannot be modified after initial startup | +| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | Cannot be modified after initial startup | +| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | Cannot be modified after initial startup | +| dn_seed_config_node | The address of the ConfigNode that the node connects to when registering to join the cluster, i.e. `cn_internal-address: cn_internal_port` | 127.0.0.1:10710 | The first CongfigNode's cn_internal-address: cn_internal_port | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | Cannot be modified after initial startup | > ❗️Attention: Editors such as VSCode Remote do not have automatic configuration saving function. Please ensure that the modified files are saved persistently, otherwise the configuration items will not take effect diff --git a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index 9f4178451..3e1a4669f 100644 --- a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -120,16 +120,16 @@ Open the ConfigNode configuration file `./conf/iotdb-system.properties`,Set the Open DataNode Configuration File `./conf/iotdb-system.properties`,Set the following parameters: -| **Configuration** | **Description** | **Default** | **Recommended value** | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | Note | -| ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------------ | ------------- | ------------- | ------------- | ---------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 127.0.0.1 | Recommend using the **IPV4 address or hostname** of the server where it is located | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | -| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Restarting the service takes effect | -| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | iotdb-1 | iotdb-2 | iotdb-3 | Cannot be modified after initial startup | -| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | Cannot be modified after initial startup | -| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | 10740 | 10740 | 10740 | Cannot be modified after initial startup | -| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | Cannot be modified after initial startup | -| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | Cannot be modified after initial startup | -| dn_seed_config_node | The address of the ConfigNode that the node connects to when registering to join the cluster, i.e. `cn_internal-address: cn_internal_port` | 127.0.0.1:10710 | The first CongfigNode's cn_internal-address: cn_internal_port | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | Cannot be modified after initial startup | +| **Configuration** | **Description** | **Default** | **Recommended value** | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | Note | +| ------------------------------- | ------------------------------------------------------------ |-----------------|-----------------------------------------------------------------------------------------------------------------| ------------- | ------------- | ------------- | ---------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | +| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Restarting the service takes effect | +| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | iotdb-1 | iotdb-2 | iotdb-3 | Cannot be modified after initial startup | +| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | Cannot be modified after initial startup | +| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | 10740 | 10740 | 10740 | Cannot be modified after initial startup | +| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | Cannot be modified after initial startup | +| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | Cannot be modified after initial startup | +| dn_seed_config_node | The address of the ConfigNode that the node connects to when registering to join the cluster, i.e. `cn_internal-address: cn_internal_port` | 127.0.0.1:10710 | The first CongfigNode's cn_internal-address: cn_internal_port | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | Cannot be modified after initial startup | > ❗️Attention: Editors such as VSCode Remote do not have automatic configuration saving function. Please ensure that the modified files are saved persistently, otherwise the configuration items will not take effect diff --git a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index d98412bbe..eca98c718 100644 --- a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -90,16 +90,16 @@ Open the ConfigNode configuration file (./conf/iotdb-system. properties file) an Open the DataNode configuration file (./conf/iotdb-system. properties file) and set the following parameters: -| **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | -| :-----------------------------: | :----------------------------------------------------------: | :-------------: | :----------------------------------------------------------: | :--------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Restarting the service takes effect | -| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | -| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | -| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | -| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | Cannot be modified after initial startup | -| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | Cannot be modified after initial startup | -| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | Cannot be modified after initial startup | -| dn_seed_config_node | The ConfigNode address that the node connects to when registering to join the cluster, i.e. cn_internal-address: cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | Cannot be modified after initial startup | +| **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | +| :-----------------------------: | :----------------------------------------------------------: | :-------------: |:---------------------------------------------------------------------------------------------------------------:| :--------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Restarting the service takes effect | +| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | +| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | +| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | +| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | Cannot be modified after initial startup | +| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | Cannot be modified after initial startup | +| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | Cannot be modified after initial startup | +| dn_seed_config_node | The ConfigNode address that the node connects to when registering to join the cluster, i.e. cn_internal-address: cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | Cannot be modified after initial startup | > ❗️Attention: Editors such as VSCode Remote do not have automatic configuration saving function. Please ensure that the modified files are saved persistently, otherwise the configuration items will not take effect diff --git a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index 24e383c7c..f40b0d5b7 100644 --- a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -94,16 +94,16 @@ Open the ConfigNode configuration file (./conf/iotdb-system. properties file) an Open the DataNode configuration file (./conf/iotdb-system. properties file) and set the following parameters: -| **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :--------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Restarting the service takes effect | -| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | -| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | -| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | -| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | Cannot be modified after initial startup | -| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | Cannot be modified after initial startup | -| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | Cannot be modified after initial startup | -| dn_seed_config_node | The ConfigNode address that the node connects to when registering to join the cluster, i.e. cn_internal-address: cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | Cannot be modified after initial startup | +| **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | +| :------------------------------ | :----------------------------------------------------------- | :-------------- |:----------------------------------------------------------------------------------------------------------------| :--------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Restarting the service takes effect | +| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | +| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | +| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | +| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | Cannot be modified after initial startup | +| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | Cannot be modified after initial startup | +| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | Cannot be modified after initial startup | +| dn_seed_config_node | The ConfigNode address that the node connects to when registering to join the cluster, i.e. cn_internal-address: cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | Cannot be modified after initial startup | > ❗️Attention: Editors such as VSCode Remote do not have automatic configuration saving function. Please ensure that the modified files are saved persistently, otherwise the configuration items will not take effect diff --git a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_apache.md index b9228bdbd..93744a56d 100644 --- a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -121,8 +121,8 @@ Open the ConfigNode configuration file `./conf/iotdb-system.properties`， Set t Open DataNode Configuration File `./conf/iotdb-system.properties`,Set the following parameters: | **Configuration** | **Description** | **Default** | **Recommended value** | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | Note | -| ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------------ | ------------- | ------------- | ------------- | ---------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 127.0.0.1 | Recommend using the **IPV4 address or hostname** of the server where it is located | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | +| ------------------------------- | ------------------------------------------------------------ |-----------------| ------------------------------------------------------------ | ------------- | ------------- | ------------- | ---------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | | dn_rpc_port | The port of the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Restarting the service takes effect | | dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | iotdb-1 | iotdb-2 | iotdb-3 | Cannot be modified after initial startup | | dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | Cannot be modified after initial startup | diff --git a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index 9f4178451..43d1835d6 100644 --- a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -121,8 +121,8 @@ Open the ConfigNode configuration file `./conf/iotdb-system.properties`,Set the Open DataNode Configuration File `./conf/iotdb-system.properties`,Set the following parameters: | **Configuration** | **Description** | **Default** | **Recommended value** | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | Note | -| ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------------ | ------------- | ------------- | ------------- | ---------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 127.0.0.1 | Recommend using the **IPV4 address or hostname** of the server where it is located | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | +| ------------------------------- | ------------------------------------------------------------ |-----------------| ------------------------------------------------------------ | ------------- | ------------- | ------------- | ---------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | | dn_rpc_port | The port of the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Restarting the service takes effect | | dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | iotdb-1 | iotdb-2 | iotdb-3 | Cannot be modified after initial startup | | dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | Cannot be modified after initial startup | diff --git a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index d98412bbe..ee5b5f761 100644 --- a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -92,7 +92,7 @@ Open the DataNode configuration file (./conf/iotdb-system. properties file) and | **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | | :-----------------------------: | :----------------------------------------------------------: | :-------------: | :----------------------------------------------------------: | :--------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Restarting the service takes effect | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Restarting the service takes effect | | dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | | dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | | dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | diff --git a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index 24e383c7c..c1d9ffdc7 100644 --- a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -94,16 +94,16 @@ Open the ConfigNode configuration file (./conf/iotdb-system. properties file) an Open the DataNode configuration file (./conf/iotdb-system. properties file) and set the following parameters: -| **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :--------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Restarting the service takes effect | -| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | -| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | -| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | -| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | Cannot be modified after initial startup | -| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | Cannot be modified after initial startup | -| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | Cannot be modified after initial startup | -| dn_seed_config_node | The ConfigNode address that the node connects to when registering to join the cluster, i.e. cn_internal-address: cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | Cannot be modified after initial startup | +| **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | +| :------------------------------ | :----------------------------------------------------------- | :-------------- |:---------------------------------------------------------------------------------------------------------------| :--------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Restarting the service takes effect | +| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | +| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | +| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | +| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | Cannot be modified after initial startup | +| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | Cannot be modified after initial startup | +| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | Cannot be modified after initial startup | +| dn_seed_config_node | The ConfigNode address that the node connects to when registering to join the cluster, i.e. cn_internal-address: cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | Cannot be modified after initial startup | > ❗️Attention: Editors such as VSCode Remote do not have automatic configuration saving function. Please ensure that the modified files are saved persistently, otherwise the configuration items will not take effect diff --git a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md index 099ea07b7..29a910b31 100644 --- a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -122,16 +122,16 @@ Set the following parameters in `./conf/iotdb-system.properties`. Refer to `./co **DataNode Parameters**: -| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- |:----------------|:----------------------------------------------------------------------------------------------------------------| :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | **Note:** Ensure files are saved after editing. Tools like VSCode Remote do not save changes automatically. diff --git a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index db3fb62c7..03c976855 100644 --- a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -122,16 +122,16 @@ Set the following parameters in `./conf/iotdb-system.properties`. Refer to `./co **DataNode Parameters**: -| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- |:----------------|:----------------------------------------------------------------------------------------------------------------| :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | **Note:** Ensure files are saved after editing. Tools like VSCode Remote do not save changes automatically. diff --git a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index 987b1495a..2f7da68b2 100644 --- a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -94,16 +94,16 @@ Set the following parameters in `conf/iotdb-system.properties`. Refer to `conf/i **DataNode Parameters**: -| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | 0.0.0.0 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- | :-------------- |:----------------------------------------------------------------------------------------------------------------| :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | ### 2.3 Start ConfigNode diff --git a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index c733ce4ed..7363d3568 100644 --- a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -93,16 +93,16 @@ Set the following parameters in `conf/iotdb-system.properties`. Refer to `conf/i **DataNode Parameters**: -| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | 0.0.0.0 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- | :-------------- |:----------------------------------------------------------------------------------------------------------------| :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | ### 2.3 Start ConfigNode diff --git a/src/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_apache.md index 92e78557b..c4e5d0879 100644 --- a/src/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -120,16 +120,16 @@ Open the ConfigNode configuration file `./conf/iotdb-system.properties`， Set t Open DataNode Configuration File `./conf/iotdb-system.properties`,Set the following parameters: -| **Configuration** | **Description** | **Default** | **Recommended value** | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | Note | -| ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------------ | ------------- | ------------- | ------------- | ---------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 127.0.0.1 | Recommend using the **IPV4 address or hostname** of the server where it is located | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | -| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Restarting the service takes effect | -| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | iotdb-1 | iotdb-2 | iotdb-3 | Cannot be modified after initial startup | -| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | Cannot be modified after initial startup | -| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | 10740 | 10740 | 10740 | Cannot be modified after initial startup | -| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | Cannot be modified after initial startup | -| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | Cannot be modified after initial startup | -| dn_seed_config_node | The address of the ConfigNode that the node connects to when registering to join the cluster, i.e. `cn_internal-address: cn_internal_port` | 127.0.0.1:10710 | The first CongfigNode's cn_internal-address: cn_internal_port | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | Cannot be modified after initial startup | +| **Configuration** | **Description** | **Default** | **Recommended value** | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | Note | +| ------------------------------- | ------------------------------------------------------------ |-----------------|-----------------------------------------------------------------------------------------------------------------| ------------- | ------------- | ------------- | ---------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 |iotdb-2 | iotdb-3 | Restarting the service takes effect | +| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Restarting the service takes effect | +| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | iotdb-1 | iotdb-2 | iotdb-3 | Cannot be modified after initial startup | +| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | Cannot be modified after initial startup | +| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | 10740 | 10740 | 10740 | Cannot be modified after initial startup | +| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | Cannot be modified after initial startup | +| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | Cannot be modified after initial startup | +| dn_seed_config_node | The address of the ConfigNode that the node connects to when registering to join the cluster, i.e. `cn_internal-address: cn_internal_port` | 127.0.0.1:10710 | The first CongfigNode's cn_internal-address: cn_internal_port | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | Cannot be modified after initial startup | > ❗️Attention: Editors such as VSCode Remote do not have automatic configuration saving function. Please ensure that the modified files are saved persistently, otherwise the configuration items will not take effect diff --git a/src/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index e3c8482e6..54a70ff81 100644 --- a/src/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -124,16 +124,16 @@ Set the following parameters in `./conf/iotdb-system.properties`. Refer to `./co #### DataNode Parameters -| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service |127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **11.101.17.224** | **11.101.17.225** | **11.101.17.226** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- |:----------------|:----------------------------------------------------------------------------------------------------------------| :---------------- | :---------------- | :---------------- | :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | iotdb-1 | iotdb-2 | iotdb-3 | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | 6667 | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | iotdb-1 | iotdb-2 | iotdb-3 | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | 10730 | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | 10740 | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | 10750 | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | 10760 | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster.(e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Address of the first ConfigNode | iotdb-1:10710 | iotdb-1:10710 | iotdb-1:10710 | This parameter cannot be modified after the first startup. | **Note:** Ensure files are saved after editing. Tools like VSCode Remote do not save changes automatically. diff --git a/src/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index 8d5f68571..f682982d9 100644 --- a/src/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -90,16 +90,16 @@ Open the ConfigNode configuration file (./conf/iotdb-system. properties file) an Open the DataNode configuration file (./conf/iotdb-system. properties file) and set the following parameters: -| **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | -| :-----------------------------: | :----------------------------------------------------------: | :-------------: | :----------------------------------------------------------: | :--------------------------------------- | -| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Restarting the service takes effect | -| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | -| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | -| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | -| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | Cannot be modified after initial startup | -| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | Cannot be modified after initial startup | -| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | Cannot be modified after initial startup | -| dn_seed_config_node | The ConfigNode address that the node connects to when registering to join the cluster, i.e. cn_internal-address: cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | Cannot be modified after initial startup | +| **Configuration** | **Description** | **Default** | **Recommended value** | **Note** | +| :-----------------------------: | :----------------------------------------------------------: | :-------------: |:---------------------------------------------------------------------------------------------------------------:| :--------------------------------------- | +| dn_rpc_address | The address of the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Restarting the service takes effect | +| dn_rpc_port | The port of the client RPC service | 6667 | 6667 | Restarting the service takes effect | +| dn_internal_address | The address used by DataNode for communication within the cluster | 127.0.0.1 | The IPV4 address or host name of the server where it is located, and it is recommended to use host name | Cannot be modified after initial startup | +| dn_internal_port | The port used by DataNode for communication within the cluster | 10730 | 10730 | Cannot be modified after initial startup | +| dn_mpp_data_exchange_port | The port used by DataNode to receive data streams | 10740 | 10740 | Cannot be modified after initial startup | +| dn_data_region_consensus_port | The port used by DataNode for data replica consensus protocol communication | 10750 | 10750 | Cannot be modified after initial startup | +| dn_schema_region_consensus_port | The port used by DataNode for metadata replica consensus protocol communication | 10760 | 10760 | Cannot be modified after initial startup | +| dn_seed_config_node | The ConfigNode address that the node connects to when registering to join the cluster, i.e. cn_internal-address: cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | Cannot be modified after initial startup | > ❗️Attention: Editors such as VSCode Remote do not have automatic configuration saving function. Please ensure that the modified files are saved persistently, otherwise the configuration items will not take effect diff --git a/src/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index a48ed2d73..2e8717504 100644 --- a/src/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -93,16 +93,16 @@ Set the following parameters in `conf/iotdb-system.properties`. Refer to `conf/i **DataNode** **Parameters**: -| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------------------- | :--------------------------------------------------------- | -| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | 0.0.0.0 | Effective after restarting the service. | -| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | -| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | -| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | -| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | -| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | -| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | -| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | +| **Parameter** | **Description** | **Default** | **Recommended** | **Notes** | +| :------------------------------ | :----------------------------------------------------------- | :-------------- |:----------------------------------------------------------------------------------------------------------------| :--------------------------------------------------------- | +| dn_rpc_address | Address for the client RPC service | 0.0.0.0 | The IPV4 address or host name of the server where it is located, and it is recommended to use the IPV4 address | Effective after restarting the service. | +| dn_rpc_port | Port for the client RPC service | 6667 | 6667 | Effective after restarting the service. | +| dn_internal_address | Address used for internal communication within the cluster | 127.0.0.1 | Server's IPv4 address or hostname. Use hostname to avoid issues when the IP changes. | This parameter cannot be modified after the first startup. | +| dn_internal_port | Port used for internal communication within the cluster | 10730 | 10730 | This parameter cannot be modified after the first startup. | +| dn_mpp_data_exchange_port | Port used for receiving data streams | 10740 | 10740 | This parameter cannot be modified after the first startup. | +| dn_data_region_consensus_port | Port used for data replica consensus protocol communication | 10750 | 10750 | This parameter cannot be modified after the first startup. | +| dn_schema_region_consensus_port | Port used for metadata replica consensus protocol communication | 10760 | 10760 | This parameter cannot be modified after the first startup. | +| dn_seed_config_node | Address of the ConfigNode for registering and joining the cluster. (e.g.,`cn_internal_address:cn_internal_port`) | 127.0.0.1:10710 | Use `cn_internal_address:cn_internal_port` | This parameter cannot be modified after the first startup. | ### 2.3 Start ConfigNode diff --git a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md index 30d4b3558..94d7d020f 100644 --- a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -123,7 +123,7 @@ cd apache-iotdb-{version}-all-bin | 配置项 | 说明 | 默认 | 推荐值 | 11.101.17.224 | 11.101.17.225 | 11.101.17.226 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的IPV4地址或hostname | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index 2b803ad2c..5e4efe7f6 100644 --- a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -123,7 +123,7 @@ cd timechodb-{version}-bin | 配置项 | 说明 | 默认 | 推荐值 | 11.101.17.224 | 11.101.17.225 | 11.101.17.226 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 |127.0.0.1 | 推荐使用所在服务器的IPV4地址或hostname | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 |0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index c6976852a..6c6dbd2c6 100644 --- a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -90,7 +90,7 @@ DataNode 配置 | **配置项** | **说明** | **默认** | 推荐值 | **备注** | | :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------- | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 0.0.0.0 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 |0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index 659c5180a..5780503ac 100644 --- a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -90,7 +90,7 @@ DataNode 配置 | **配置项** | **说明** | **默认** | 推荐值 | **备注** | | :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------- | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 0.0.0.0 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 |0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_apache.md index f8581f3b0..147a6c1f4 100644 --- a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -122,7 +122,7 @@ cd apache-iotdb-{version}-all-bin | 配置项 | 说明 | 默认 | 推荐值 | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的**IPV4地址或hostname** | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index d056450a0..3d9853fc3 100644 --- a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -123,7 +123,7 @@ cd iotdb-enterprise-{version}-bin | 配置项 | 说明 | 默认 | 推荐值 | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的**IPV4地址或hostname** | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index ce3c5f204..f0dc6168e 100644 --- a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -92,7 +92,7 @@ cd apache-iotdb-{version}-all-bin | **配置项** | **说明** | **默认** | 推荐值 | **备注** | | :-----------------------------: | :----------------------------------------------------------: | :-------------: | :----------------------------------------------: | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index 4afa4a4f5..0908c52eb 100644 --- a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -96,7 +96,7 @@ cd iotdb-enterprise-{version}-bin | **配置项** | **说明** | **默认** | 推荐值 | **备注** | | :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------- | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_apache.md index 52ca0e588..34093da57 100644 --- a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -122,7 +122,7 @@ cd apache-iotdb-{version}-all-bin | 配置项 | 说明 | 默认 | 推荐值 | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的**IPV4地址或hostname** | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index b151c5efd..4b2796464 100644 --- a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -123,7 +123,7 @@ cd iotdb-enterprise-{version}-bin | 配置项 | 说明 | 默认 | 推荐值 | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的**IPV4地址或hostname** | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index 90c93ecc6..72c261ce4 100644 --- a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -92,7 +92,7 @@ cd apache-iotdb-{version}-all-bin | **配置项** | **说明** | **默认** | 推荐值 | **备注** | | :-----------------------------: | :----------------------------------------------------------: | :-------------: | :----------------------------------------------: | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index a120e9f02..1e71d7b9c 100644 --- a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -96,7 +96,7 @@ cd iotdb-enterprise-{version}-bin | **配置项** | **说明** | **默认** | 推荐值 | **备注** | | :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------- | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 |0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_apache.md index b1009cbea..e43d1a3fb 100644 --- a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -122,7 +122,7 @@ cd apache-iotdb-{version}-all-bin | 配置项 | 说明 | 默认 | 推荐值 | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的**IPV4地址或hostname** | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index b151c5efd..25e7ab414 100644 --- a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -121,9 +121,9 @@ cd iotdb-enterprise-{version}-bin 打开DataNode配置文件 `./conf/iotdb-system.properties`，设置以下参数： -| 配置项 | 说明 | 默认 | 推荐值 | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | 备注 | -| ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的**IPV4地址或hostname** | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| 配置项 | 说明 | 默认 | 推荐值 | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | 备注 | +| ------------------------------- | ------------------------------------------------------------ |-----------------| ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index 90c93ecc6..befcbfbee 100644 --- a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -92,7 +92,7 @@ cd apache-iotdb-{version}-all-bin | **配置项** | **说明** | **默认** | 推荐值 | **备注** | | :-----------------------------: | :----------------------------------------------------------: | :-------------: | :----------------------------------------------: | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index 52fc27ecb..088cd29e6 100644 --- a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -97,7 +97,7 @@ cd iotdb-enterprise-{version}-bin | **配置项** | **说明** | **默认** | 推荐值 | **备注** | | :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------- | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md index f4d123b53..becaa682e 100644 --- a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -123,7 +123,7 @@ cd apache-iotdb-{version}-all-bin | 配置项 | 说明 | 默认 | 推荐值 | 11.101.17.224 | 11.101.17.225 | 11.101.17.226 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的IPV4地址或hostname | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index e54a08de7..9b2199ccb 100644 --- a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -123,7 +123,7 @@ cd timechodb-{version}-bin | 配置项 | 说明 | 默认 | 推荐值 | 11.101.17.224 | 11.101.17.225 | 11.101.17.226 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | --------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的IPV4地址或hostname | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index cbe1205f8..2c66929ea 100644 --- a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -88,16 +88,16 @@ ConfigNode 配置 DataNode 配置 -| **配置项** | **说明** | **默认** | 推荐值 | **备注** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------- | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 0.0.0.0 | 重启服务生效 | -| dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | -| dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | -| dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | -| dn_mpp_data_exchange_port | DataNode用于接收数据流使用的端口 | 10740 | 10740 | 首次启动后不能修改 | -| dn_data_region_consensus_port | DataNode用于数据副本共识协议通信使用的端口 | 10750 | 10750 | 首次启动后不能修改 | -| dn_schema_region_consensus_port | DataNode用于元数据副本共识协议通信使用的端口 | 10760 | 10760 | 首次启动后不能修改 | -| dn_seed_config_node | 节点注册加入集群时连接的ConfigNode地址,即cn_internal_address:cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | 首次启动后不能修改 | +| **配置项** | **说明** | **默认** | 推荐值 | **备注** | +| :------------------------------ | :----------------------------------------------------------- | :-------------- |:----------------------------------------| :----------------- | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | +| dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | +| dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | +| dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | +| dn_mpp_data_exchange_port | DataNode用于接收数据流使用的端口 | 10740 | 10740 | 首次启动后不能修改 | +| dn_data_region_consensus_port | DataNode用于数据副本共识协议通信使用的端口 | 10750 | 10750 | 首次启动后不能修改 | +| dn_schema_region_consensus_port | DataNode用于元数据副本共识协议通信使用的端口 | 10760 | 10760 | 首次启动后不能修改 | +| dn_seed_config_node | 节点注册加入集群时连接的ConfigNode地址,即cn_internal_address:cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | 首次启动后不能修改 | ### 2.3 启动 ConfigNode 节点 diff --git a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index b9ac9293f..717739036 100644 --- a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -88,16 +88,16 @@ ConfigNode 配置 DataNode 配置 -| **配置项** | **说明** | **默认** | 推荐值 | **备注** | -| :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------- | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 0.0.0.0 | 重启服务生效 | -| dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | -| dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | -| dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | -| dn_mpp_data_exchange_port | DataNode用于接收数据流使用的端口 | 10740 | 10740 | 首次启动后不能修改 | -| dn_data_region_consensus_port | DataNode用于数据副本共识协议通信使用的端口 | 10750 | 10750 | 首次启动后不能修改 | -| dn_schema_region_consensus_port | DataNode用于元数据副本共识协议通信使用的端口 | 10760 | 10760 | 首次启动后不能修改 | -| dn_seed_config_node | 节点注册加入集群时连接的ConfigNode地址,即cn_internal_address:cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | 首次启动后不能修改 | +| **配置项** | **说明** | **默认** | 推荐值 | **备注** | +| :------------------------------ | :----------------------------------------------------------- | :-------------- |:----------------------------------------| :----------------- | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | +| dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | +| dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | +| dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | +| dn_mpp_data_exchange_port | DataNode用于接收数据流使用的端口 | 10740 | 10740 | 首次启动后不能修改 | +| dn_data_region_consensus_port | DataNode用于数据副本共识协议通信使用的端口 | 10750 | 10750 | 首次启动后不能修改 | +| dn_schema_region_consensus_port | DataNode用于元数据副本共识协议通信使用的端口 | 10760 | 10760 | 首次启动后不能修改 | +| dn_seed_config_node | 节点注册加入集群时连接的ConfigNode地址,即cn_internal_address:cn_internal_port | 127.0.0.1:10710 | cn_internal_address:cn_internal_port | 首次启动后不能修改 | ### 2.3 启动 ConfigNode 节点 diff --git a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_apache.md b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_apache.md index f8581f3b0..d4199aa91 100644 --- a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_apache.md +++ b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_apache.md @@ -122,7 +122,7 @@ cd apache-iotdb-{version}-all-bin | 配置项 | 说明 | 默认 | 推荐值 | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的**IPV4地址或hostname** | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_timecho.md b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_timecho.md index e83b95239..d227171f1 100644 --- a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_timecho.md +++ b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Cluster-Deployment_timecho.md @@ -123,7 +123,7 @@ cd iotdb-enterprise-{version}-bin | 配置项 | 说明 | 默认 | 推荐值 | 192.168.1.3 | 192.168.1.4 | 192.168.1.5 | 备注 | | ------------------------------- | ------------------------------------------------------------ | --------------- | ------------------------------------------------------- | ------------- | ------------- | ------------- | ------------------ | -| dn_rpc_address | 客户端 RPC 服务的地址 | 127.0.0.1 | 推荐使用所在服务器的**IPV4地址或hostname** | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | iotdb-1 |iotdb-2 | iotdb-3 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 6667 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | iotdb-1 | iotdb-2 | iotdb-3 | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 10730 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md index ce3c5f204..f0dc6168e 100644 --- a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md +++ b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_apache.md @@ -92,7 +92,7 @@ cd apache-iotdb-{version}-all-bin | **配置项** | **说明** | **默认** | 推荐值 | **备注** | | :-----------------------------: | :----------------------------------------------------------: | :-------------: | :----------------------------------------------: | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 | diff --git a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md index d1bc4bcd5..883cdf09d 100644 --- a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md +++ b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Stand-Alone-Deployment_timecho.md @@ -96,7 +96,7 @@ cd iotdb-enterprise-{version}-bin | **配置项** | **说明** | **默认** | 推荐值 | **备注** | | :------------------------------ | :----------------------------------------------------------- | :-------------- | :----------------------------------------------- | :----------------- | -| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 重启服务生效 | +| dn_rpc_address | 客户端 RPC 服务的地址 | 0.0.0.0 | 所在服务器的IPV4地址或hostname，推荐使用所在服务器的IPV4地址 | 重启服务生效 | | dn_rpc_port | 客户端 RPC 服务的端口 | 6667 | 6667 | 重启服务生效 | | dn_internal_address | DataNode在集群内部通讯使用的地址 | 127.0.0.1 | 所在服务器的IPV4地址或hostname，推荐使用hostname | 首次启动后不能修改 | | dn_internal_port | DataNode在集群内部通信使用的端口 | 10730 | 10730 | 首次启动后不能修改 |