|
30 | 30 | "AssociateNatGatewayAddress": "<p>Associates Elastic IP addresses (EIPs) and private IPv4 addresses with a public NAT gateway. For more information, see <a href=\"https://docs.aws.amazon.com/vpc/latest/userguide/nat-gateway-working-with.html\">Work with NAT gateways</a> in the <i>Amazon VPC User Guide</i>.</p> <p>By default, you can associate up to 2 Elastic IP addresses per public NAT gateway. You can increase the limit by requesting a quota adjustment. For more information, see <a href=\"https://docs.aws.amazon.com/vpc/latest/userguide/amazon-vpc-limits.html#vpc-limits-eips\">Elastic IP address quotas</a> in the <i>Amazon VPC User Guide</i>.</p> <important> <p>When you associate an EIP or secondary EIPs with a public NAT gateway, the network border group of the EIPs must match the network border group of the Availability Zone (AZ) that the public NAT gateway is in. If it's not the same, the EIP will fail to associate. You can see the network border group for the subnet's AZ by viewing the details of the subnet. Similarly, you can view the network border group of an EIP by viewing the details of the EIP address. For more information about network border groups and EIPs, see <a href=\"https://docs.aws.amazon.com/vpc/latest/userguide/WorkWithEIPs.html\">Allocate an Elastic IP address</a> in the <i>Amazon VPC User Guide</i>. </p> </important>", |
31 | 31 | "AssociateRouteServer": "<p>Associates a route server with a VPC to enable dynamic route updates.</p> <p>A route server association is the connection established between a route server and a VPC.</p> <p>For more information see <a href=\"https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html\">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>", |
32 | 32 | "AssociateRouteTable": "<p>Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets.</p> <p>For more information, see <a href=\"https://docs.aws.amazon.com/vpc/latest/userguide/VPC_Route_Tables.html\">Route tables</a> in the <i>Amazon VPC User Guide</i>.</p>", |
33 | | - "AssociateSecurityGroupVpc": "<p>Associates a security group with another VPC in the same Region. This enables you to use the same security group with network interfaces and instances in the specified VPC.</p> <note> <ul> <li> <p>The VPC you want to associate the security group with must be in the same Region.</p> </li> <li> <p>You can associate the security group with another VPC if your account owns the VPC or if the VPC was shared with you.</p> </li> <li> <p>You must own the security group and the VPC that it was created in.</p> </li> <li> <p>You cannot use this feature with default security groups.</p> </li> <li> <p>You cannot use this feature with the default VPC.</p> </li> </ul> </note>", |
| 33 | + "AssociateSecurityGroupVpc": "<p>Associates a security group with another VPC in the same Region. This enables you to use the same security group with network interfaces and instances in the specified VPC.</p> <note> <ul> <li> <p>The VPC you want to associate the security group with must be in the same Region.</p> </li> <li> <p>You can associate the security group with another VPC if your account owns the VPC or if the VPC was shared with you.</p> </li> <li> <p>You must own the security group.</p> </li> <li> <p>You cannot use this feature with default security groups.</p> </li> <li> <p>You cannot use this feature with the default VPC.</p> </li> </ul> </note>", |
34 | 34 | "AssociateSubnetCidrBlock": "<p>Associates a CIDR block with your subnet. You can only associate a single IPv6 CIDR block with your subnet.</p>", |
35 | 35 | "AssociateTransitGatewayMulticastDomain": "<p>Associates the specified subnets and transit gateway attachments with the specified transit gateway multicast domain.</p> <p>The transit gateway attachment must be in the available state before you can add a resource. Use <a href=\"https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_DescribeTransitGatewayAttachments.html\">DescribeTransitGatewayAttachments</a> to see the state of the attachment.</p>", |
36 | 36 | "AssociateTransitGatewayPolicyTable": "<p>Associates the specified transit gateway attachment with a transit gateway policy table.</p>", |
|
10618 | 10618 | "DescribeScheduledInstanceAvailabilityRequest$Filters": "<p>The filters.</p> <ul> <li> <p> <code>availability-zone</code> - The Availability Zone (for example, <code>us-west-2a</code>).</p> </li> <li> <p> <code>instance-type</code> - The instance type (for example, <code>c4.large</code>).</p> </li> <li> <p> <code>platform</code> - The platform (<code>Linux/UNIX</code> or <code>Windows</code>).</p> </li> </ul>", |
10619 | 10619 | "DescribeScheduledInstancesRequest$Filters": "<p>The filters.</p> <ul> <li> <p> <code>availability-zone</code> - The Availability Zone (for example, <code>us-west-2a</code>).</p> </li> <li> <p> <code>instance-type</code> - The instance type (for example, <code>c4.large</code>).</p> </li> <li> <p> <code>platform</code> - The platform (<code>Linux/UNIX</code> or <code>Windows</code>).</p> </li> </ul>", |
10620 | 10620 | "DescribeSecurityGroupRulesRequest$Filters": "<p>One or more filters.</p> <ul> <li> <p> <code>group-id</code> - The ID of the security group.</p> </li> <li> <p> <code>security-group-rule-id</code> - The ID of the security group rule.</p> </li> <li> <p> <code>tag</code>:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key <code>Owner</code> and the value <code>TeamA</code>, specify <code>tag:Owner</code> for the filter name and <code>TeamA</code> for the filter value.</p> </li> </ul>", |
10621 | | - "DescribeSecurityGroupVpcAssociationsRequest$Filters": "<p>Security group VPC association filters.</p> <ul> <li> <p> <code>group-id</code>: The security group ID.</p> </li> <li> <p> <code>vpc-id</code>: The ID of the associated VPC.</p> </li> <li> <p> <code>vpc-owner-id</code>: The account ID of the VPC owner.</p> </li> <li> <p> <code>state</code>: The state of the association.</p> </li> <li> <p> <code>tag:<key></code>: The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key <code>Owner</code> and the value <code>TeamA</code>, specify <code>tag:Owner</code> for the filter name and <code>TeamA</code> for the filter value.</p> </li> <li> <p> <code>tag-key</code>: The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.</p> </li> </ul>", |
| 10621 | + "DescribeSecurityGroupVpcAssociationsRequest$Filters": "<p>Security group VPC association filters.</p> <ul> <li> <p> <code>group-id</code>: The security group ID.</p> </li> <li> <p> <code>group-owner-id</code>: The group owner ID.</p> </li> <li> <p> <code>vpc-id</code>: The ID of the associated VPC.</p> </li> <li> <p> <code>vpc-owner-id</code>: The account ID of the VPC owner.</p> </li> <li> <p> <code>state</code>: The state of the association.</p> </li> <li> <p> <code>tag:<key></code>: The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key <code>Owner</code> and the value <code>TeamA</code>, specify <code>tag:Owner</code> for the filter name and <code>TeamA</code> for the filter value.</p> </li> <li> <p> <code>tag-key</code>: The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.</p> </li> </ul>", |
10622 | 10622 | "DescribeSecurityGroupsRequest$Filters": "<p>The filters. If using multiple filters for rules, the results include security groups for which any combination of rules - not necessarily a single rule - match all filters.</p> <ul> <li> <p> <code>description</code> - The description of the security group.</p> </li> <li> <p> <code>egress.ip-permission.cidr</code> - An IPv4 CIDR block for an outbound security group rule.</p> </li> <li> <p> <code>egress.ip-permission.from-port</code> - For an outbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.</p> </li> <li> <p> <code>egress.ip-permission.group-id</code> - The ID of a security group that has been referenced in an outbound security group rule.</p> </li> <li> <p> <code>egress.ip-permission.group-name</code> - The name of a security group that is referenced in an outbound security group rule.</p> </li> <li> <p> <code>egress.ip-permission.ipv6-cidr</code> - An IPv6 CIDR block for an outbound security group rule.</p> </li> <li> <p> <code>egress.ip-permission.prefix-list-id</code> - The ID of a prefix list to which a security group rule allows outbound access.</p> </li> <li> <p> <code>egress.ip-permission.protocol</code> - The IP protocol for an outbound security group rule (<code>tcp</code> | <code>udp</code> | <code>icmp</code>, a protocol number, or -1 for all protocols).</p> </li> <li> <p> <code>egress.ip-permission.to-port</code> - For an outbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.</p> </li> <li> <p> <code>egress.ip-permission.user-id</code> - The ID of an Amazon Web Services account that has been referenced in an outbound security group rule.</p> </li> <li> <p> <code>group-id</code> - The ID of the security group. </p> </li> <li> <p> <code>group-name</code> - The name of the security group.</p> </li> <li> <p> <code>ip-permission.cidr</code> - An IPv4 CIDR block for an inbound security group rule.</p> </li> <li> <p> <code>ip-permission.from-port</code> - For an inbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.</p> </li> <li> <p> <code>ip-permission.group-id</code> - The ID of a security group that has been referenced in an inbound security group rule.</p> </li> <li> <p> <code>ip-permission.group-name</code> - The name of a security group that is referenced in an inbound security group rule.</p> </li> <li> <p> <code>ip-permission.ipv6-cidr</code> - An IPv6 CIDR block for an inbound security group rule.</p> </li> <li> <p> <code>ip-permission.prefix-list-id</code> - The ID of a prefix list from which a security group rule allows inbound access.</p> </li> <li> <p> <code>ip-permission.protocol</code> - The IP protocol for an inbound security group rule (<code>tcp</code> | <code>udp</code> | <code>icmp</code>, a protocol number, or -1 for all protocols).</p> </li> <li> <p> <code>ip-permission.to-port</code> - For an inbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.</p> </li> <li> <p> <code>ip-permission.user-id</code> - The ID of an Amazon Web Services account that has been referenced in an inbound security group rule.</p> </li> <li> <p> <code>owner-id</code> - The Amazon Web Services account ID of the owner of the security group.</p> </li> <li> <p> <code>tag</code>:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key <code>Owner</code> and the value <code>TeamA</code>, specify <code>tag:Owner</code> for the filter name and <code>TeamA</code> for the filter value.</p> </li> <li> <p> <code>tag-key</code> - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.</p> </li> <li> <p> <code>vpc-id</code> - The ID of the VPC specified when the security group was created.</p> </li> </ul>", |
10623 | 10623 | "DescribeServiceLinkVirtualInterfacesRequest$Filters": "<p>The filters to use for narrowing down the request. The following filters are supported:</p> <ul> <li> <p> <code>outpost-lag-id</code> - The ID of the Outpost LAG.</p> </li> <li> <p> <code>outpost-arn</code> - The Outpost ARN.</p> </li> <li> <p> <code>owner-id</code> - The ID of the Amazon Web Services account that owns the service link virtual interface.</p> </li> <li> <p> <code>state</code> - The state of the Outpost LAG.</p> </li> <li> <p> <code>vlan</code> - The ID of the address pool.</p> </li> <li> <p> <code>service-link-virtual-interface-id</code> - The ID of the service link virtual interface.</p> </li> <li> <p> <code>local-gateway-virtual-interface-id</code> - The ID of the local gateway virtual interface.</p> </li> </ul>", |
10624 | 10624 | "DescribeSnapshotTierStatusRequest$Filters": "<p>The filters.</p> <ul> <li> <p> <code>snapshot-id</code> - The snapshot ID.</p> </li> <li> <p> <code>volume-id</code> - The ID of the volume the snapshot is for.</p> </li> <li> <p> <code>last-tiering-operation</code> - The state of the last archive or restore action. (<code>archival-in-progress</code> | <code>archival-completed</code> | <code>archival-failed</code> | <code>permanent-restore-in-progress</code> | <code>permanent-restore-completed</code> | <code>permanent-restore-failed</code> | <code>temporary-restore-in-progress</code> | <code>temporary-restore-completed</code> | <code>temporary-restore-failed</code>)</p> </li> </ul>", |
|
23562 | 23562 | "SecurityGroupRuleRequest$Description": "<p>The description of the security group rule.</p>", |
23563 | 23563 | "SecurityGroupVpcAssociation$VpcOwnerId": "<p>The Amazon Web Services account ID of the owner of the VPC.</p>", |
23564 | 23564 | "SecurityGroupVpcAssociation$StateReason": "<p>The association's state reason.</p>", |
| 23565 | + "SecurityGroupVpcAssociation$GroupOwnerId": "<p>The Amazon Web Services account ID of the owner of the security group.</p>", |
23565 | 23566 | "ServiceConfiguration$ServiceId": "<p>The ID of the service.</p>", |
23566 | 23567 | "ServiceConfiguration$ServiceName": "<p>The name of the service.</p>", |
23567 | 23568 | "ServiceConfiguration$PrivateDnsName": "<p>The private DNS name for the service.</p>", |
|
0 commit comments