DS218 failed to start package

[angipp01]

Description of the problem

I've tried releases from 2.19 to 2.15 and all fail to run.

Description of your products

• the product name of your NAS DS218
  • and output of uname -a command
  • Linux Ippolito 4.4.302+ #72806 SMP Thu Sep 5 13:44:21 CST 2024 aarch64 GNU/Linux synology_rtd1296_ds218
  • DSM version 7.2.2-72806 Update 3
• the product name of the ethernet dongle = UGREEN 2.5GBS USB-A to RJ45

Description of your environment

Connected to Gig TP-link (unmanaged) Switch using Cat 6 cable.

Output of dmesg command

Please view the attached file

[dmesg.txt](https://github.com/user-attachments/files/18850603/dmesg.txt)

Output of lsusb command

|__usb2          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.302+ xhci-hcd xHCI Host Controller xhci-hcd.2.auto) hub
|__usb3          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.302+ xhci-hcd xHCI Host Controller xhci-hcd.2.auto) hub
  |__3-1         0bda:8156:31f4 00  3.20 5000MBit/s 256mA 2IFs (Realtek USB 10/100/1G/2.5G LAN 4F13000001)
|__usb4          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.302+ xhci-hcd xHCI Host Controller xhci-hcd.5.auto) hub
|__usb5          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.302+ xhci-hcd xHCI Host Controller xhci-hcd.5.auto) hub
|__usb6          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.302+ xhci-hcd xHCI Host Controller xhci-hcd.8.auto) hub
|__usb7          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.302+ xhci-hcd xHCI Host Controller xhci-hcd.8.auto) hub

Output of ifconfig -a command

~$ ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:11:32:A8:4B:44
          inet addr:192.168.2.6  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::211:32ff:fea8:4b44/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:255867 errors:0 dropped:0 overruns:0 frame:0
          TX packets:180177 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:64398902 (61.4 MiB)  TX bytes:126493747 (120.6 MiB)
          Interrupt:11

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:13992 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13992 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:2012901 (1.9 MiB)  TX bytes:2012901 (1.9 MiB)

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[angipp01]

Spent about 3 days. Don’t know why it is happening. The instructions are so simple.

[angipp01]

[silencer1979]

having the same problem on DS218+.
/var/packages/r8152/var/log says:

insmod: ERROR: could not insert module /volume1/@appstore/r8152/r8152/r8152.ko: Operation not permitted
rmmod: ERROR: Module r8152 is not currently loaded