SW1-config.txt

!
! Last configuration change at 04:24:38 UTC Wed Jun 1 2016
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW1
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
vtp domain virl.lab
vtp mode transparent
!
ip dhcp excluded-address 172.16.200.1 172.16.200.254
!
ip dhcp pool WORKSTATIONS
 network 172.16.200.0 255.255.255.0
 default-router 172.16.200.254 
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
!
spanning-tree mode rapid-pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 2
 name ank_vlan2
!
vlan 100,200 
!
vlan 300
 name Management
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 no ip address
!
interface Port-channel1
 switchport access vlan 2
 switchport trunk allowed vlan 1-99,101-4094
 switchport trunk encapsulation dot1q
 switchport mode trunk
!
interface GigabitEthernet0/1
 description to SW2
 switchport access vlan 2
 switchport trunk allowed vlan 1-99,101-4094
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
!
interface GigabitEthernet0/2
 description GigabitEthernet0/2
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
!
interface GigabitEthernet0/3
 description GigabitEthernet0/3
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
!
interface GigabitEthernet0/0
 description OOB management
 no switchport
 vrf forwarding Mgmt-intf
 ip address 10.255.0.134 255.255.0.0
 negotiation auto
 no cdp enable
!
interface GigabitEthernet1/0
 description to SW3
 switchport access vlan 2
 switchport trunk allowed vlan 1-99,101-4094
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
!
interface GigabitEthernet1/1
 description to SW5
 switchport access vlan 2
 switchport trunk allowed vlan 1-99,101-4094
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
 channel-group 1 mode on
!
interface GigabitEthernet1/2
 media-type rj45
 negotiation auto
!
interface GigabitEthernet1/3
 media-type rj45
 negotiation auto
!
interface GigabitEthernet2/0
 description to R5
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
!
interface GigabitEthernet2/1
 description to SW2
 switchport access vlan 2
 switchport trunk allowed vlan 1-99,101-4094
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
 spanning-tree vlan 200 port-priority 0
!
interface GigabitEthernet2/2
 media-type rj45
 negotiation auto
!
interface GigabitEthernet2/3
 media-type rj45
 negotiation auto
!
interface GigabitEthernet3/0
 media-type rj45
 negotiation auto
!
interface GigabitEthernet3/1
 description to SW5
 switchport access vlan 2
 switchport trunk allowed vlan 1-99,101-4094
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
 channel-group 1 mode on
!
interface GigabitEthernet3/2
 media-type rj45
 negotiation auto
!
interface GigabitEthernet3/3
 description GigabitEthernet3/3
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
!
interface Vlan100
 ip address 172.16.100.1 255.255.255.0
!
interface Vlan200
 ip address 172.16.200.1 255.255.255.0
!
interface Vlan300
 ip address 172.30.0.1 255.255.255.0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
!
line con 0
 password cisco
line aux 0
line vty 0 4
 exec-timeout 720 0
 password cisco
 login
 transport input telnet ssh
!
!
end