SW3-config.txt

!
! Last configuration change at 16:39:17 UTC Sat Jun 11 2016
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname SW3
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
no process cpu extended history
!
!
!
!
!
vtp domain virl.lab
vtp mode transparent
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
!
spanning-tree mode rapid-pvst
no spanning-tree etherchannel guard misconfig
spanning-tree extend system-id
spanning-tree vlan 100 priority 28672
!
vlan internal allocation policy ascending
!
vlan 2
 name ank_vlan2
!
vlan 200 
!
vlan 300
 name Management
no cdp run
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 no ip address
!
interface Port-channel2
 switchport access vlan 2
 switchport trunk encapsulation dot1q
 switchport mode trunk
 spanning-tree portfast network
 spanning-tree bpdufilter enable
!
interface GigabitEthernet0/1
 description GigabitEthernet0/1
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
 no cdp enable
!
interface GigabitEthernet0/2
 description GigabitEthernet0/2
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
 no cdp enable
!
interface GigabitEthernet0/3
 media-type rj45
 negotiation auto
 no cdp enable
!
interface GigabitEthernet0/0
 description OOB management
 no switchport
 vrf forwarding Mgmt-intf
 ip address 10.255.0.242 255.255.0.0
 negotiation auto
 no cdp enable
!
interface GigabitEthernet1/0
 description to SW1
 switchport access vlan 2
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
 no cdp enable
!
interface GigabitEthernet1/1
 description GigabitEthernet1/1
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
 no cdp enable
!
interface GigabitEthernet1/2
 description to SW4
 switchport access vlan 2
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
 no cdp enable
!
interface GigabitEthernet1/3
 description to SW5
 switchport access vlan 2
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
 no cdp enable
 channel-group 2 mode on
!
interface GigabitEthernet2/0
 description to PC1
 switchport access vlan 100
 switchport mode access
 media-type rj45
 negotiation auto
 no cdp enable
!
interface GigabitEthernet2/1
 description GigabitEthernet2/1
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
 no cdp enable
!
interface GigabitEthernet2/2
 media-type rj45
 negotiation auto
 no cdp enable
!
interface GigabitEthernet2/3
 description to SW5
 switchport access vlan 2
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
 no cdp enable
 channel-group 2 mode on
!
interface GigabitEthernet3/0
 description to R7
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
 no cdp enable
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
!
line con 0
 password cisco
line aux 0
line vty 0 4
 exec-timeout 720 0
 password cisco
 login
 transport input telnet ssh
!
!
end