Like to get 6 new second generation boards

[Blainea2022]

Dale, I read your article in IEEE "Spectrum". Is there any way that I can get 6 of your 2nd generation PC boards? It is part of emergency communications network that I would like to put in place for my community.

Thanks,

Blainea2022

[dalethomas81]

Hey Blainea2022 - do you mean 6 fully assembled boards or just the PCBs? I assume you mean PCBs. If so, I may have a few laying around that I could send you. However, you do realize that you can also order these boards yourself. The Eagle files can be found at this link: https://github.com/dalethomas81/HamMessenger/tree/master/Documentation/CAD/Eagle

…

Sent from my iPhone

On Jan 26, 2022, at 9:40 PM, Blainea2022 ***@***.***> wrote:  Dale, I read your article in IEEE "Spectrum". Is there any way that I can get 6 of your 2nd generation PC boards? It is part of emergency communications network that I would like to put in place for my community. Thanks, Blainea2022 — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.

[dalethomas81]

Also, let me note that I do not recommend relying on HamMessenger for emergency communications. It is not robust and developed enough for something like that. Nothing beats a good old analog handheld in an emergency:)

…

Sent from my iPhone

On Jan 27, 2022, at 1:32 AM, Dale Thomas ***@***.***> wrote: Hey Blainea2022 - do you mean 6 fully assembled boards or just the PCBs? I assume you mean PCBs. If so, I may have a few laying around that I could send you. However, you do realize that you can also order these boards yourself. The Eagle files can be found at this link: https://github.com/dalethomas81/HamMessenger/tree/master/Documentation/CAD/Eagle Sent from my iPhone >> On Jan 26, 2022, at 9:40 PM, Blainea2022 ***@***.***> wrote: >> >  > Dale, I read your article in IEEE "Spectrum". Is there any way that I can get 6 of your 2nd generation PC boards? It is part of emergency communications network that I would like to put in place for my community. > > Thanks, > > Blainea2022 > > — > Reply to this email directly, view it on GitHub, or unsubscribe. > You are receiving this because you are subscribed to this thread.

[Blainea2022]

Dale, thank you for getting back. I went to the Eagle folders and got confused, do I send the Gerber files or the Shield_2021-07-24.zip to PCBWay? I am so far behind the times that I don’t understand what programs are available for layout a PCB and what different companies work with. Thanks for your input on emergency communications. Maybe my challenge would be to harden your project for my needs. I have limited experience with WinLink. I use my laptop, a Arduino (tiny) modem, and 2 meter handheld FM transceiver on packet. But in the emergency mode I need my back up generator to keep it all going on WinLink. That is a lot of investment for each station. I think I can run yours from a car battery for long time and each station is about 300 hundred dollars. Getting an 80 character message through seems much easier than WinLink. Unlike audio there is a record on SD card. If you would like I can send some real “green stuff” to cover your expenses. Thanks again Blaine Anderson 1345 North 2550 East Layton, UT 84040-2733 Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows From: ***@***.***> Sent: Thursday, January 27, 2022 2:38 AM To: ***@***.***> Cc: ***@***.***>; ***@***.***> Subject: Re: [dalethomas81/HamMessenger] Like to get 6 new second generation boards (Issue #15) Also, let me note that I do not recommend relying on HamMessenger for emergency communications. It is not robust and developed enough for something like that. Nothing beats a good old analog handheld in an emergency:)

Sent from my iPhone

On Jan 27, 2022, at 1:32 AM, Dale Thomas ***@***.***> wrote: Hey Blainea2022 - do you mean 6 fully assembled boards or just the PCBs? I assume you mean PCBs. If so, I may have a few laying around that I could send you. However, you do realize that you can also order these boards yourself. The Eagle files can be found at this link: https://github.com/dalethomas81/HamMessenger/tree/master/Documentation/CAD/Eagle Sent from my iPhone >> On Jan 26, 2022, at 9:40 PM, Blainea2022 ***@***.***> wrote: >> >  > Dale, I read your article in IEEE "Spectrum". Is there any way that I can get 6 of your 2nd generation PC boards? It is part of emergency communications network that I would like to put in place for my community. > > Thanks, > > Blainea2022 > > — > Reply to this email directly, view it on GitHub, or unsubscribe. > You are receiving this because you are subscribed to this thread.

— Reply to this email directly, view it on GitHub<#15 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AXPSCVBLAJN3N5FGXUZT5QLUYEHDBANCNFSM5M45YMUA>. Triage notifications on the go with GitHub Mobile for iOS<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you authored the thread.Message ID: ***@***.***>