ADS1X15.cpp

//
//    FILE: ADS1X15.cpp
//  AUTHOR: Rob Tillaart
// VERSION: 0.4.4
//    DATE: 2013-03-24
// PURPOSE: Arduino library for ADS1015 and ADS1115
//     URL: https://github.com/RobTillaart/ADS1X15


#include "ADS1X15.h"

#define ADS1015_CONVERSION_DELAY    1
#define ADS1115_CONVERSION_DELAY    8


//  Kept #defines a bit in line with Adafruit library.

//  REGISTERS
#define ADS1X15_REG_CONVERT         0x00
#define ADS1X15_REG_CONFIG          0x01
#define ADS1X15_REG_LOW_THRESHOLD   0x02
#define ADS1X15_REG_HIGH_THRESHOLD  0x03


//  CONFIG REGISTER

//  BIT 15      Operational Status           //  1 << 15
#define ADS1X15_OS_BUSY             0x0000
#define ADS1X15_OS_NOT_BUSY         0x8000
#define ADS1X15_OS_START_SINGLE     0x8000

//  BIT 12-14   read differential
#define ADS1X15_MUX_DIFF_0_1        0x0000
#define ADS1X15_MUX_DIFF_0_3        0x1000
#define ADS1X15_MUX_DIFF_1_3        0x2000
#define ADS1X15_MUX_DIFF_2_3        0x3000
//              read single
#define ADS1X15_READ_0              0x4000   //  pin << 12
#define ADS1X15_READ_1              0x5000   //  pin = 0..3
#define ADS1X15_READ_2              0x6000
#define ADS1X15_READ_3              0x7000


//  BIT 9-11    gain                         //  (0..5) << 9
#define ADS1X15_PGA_6_144V          0x0000   //  voltage
#define ADS1X15_PGA_4_096V          0x0200   //
#define ADS1X15_PGA_2_048V          0x0400   //  default
#define ADS1X15_PGA_1_024V          0x0600
#define ADS1X15_PGA_0_512V          0x0800
#define ADS1X15_PGA_0_256V          0x0A00

//  BIT 8       mode                         //  1 << 8
#define ADS1X15_MODE_CONTINUE       0x0000
#define ADS1X15_MODE_SINGLE         0x0100

//  BIT 5-7     data rate sample per second  //  (0..7) << 5
/*
differs for different devices, check datasheet or readme.md

|  data rate  |  ADS101x  |  ADS111x  |   Notes   |
|:-----------:|----------:|----------:|:---------:|
|     0       |   128     |    8      |  slowest  |
|     1       |   250     |    16     |           |
|     2       |   490     |    32     |           |
|     3       |   920     |    64     |           |
|     4       |   1600    |    128    |  default  |
|     5       |   2400    |    250    |           |
|     6       |   3300    |    475    |           |
|     7       |   3300    |    860    |  fastest  |
*/

//  BIT 4 comparator modi                    //  1 << 4
#define ADS1X15_COMP_MODE_TRADITIONAL   0x0000
#define ADS1X15_COMP_MODE_WINDOW        0x0010

//  BIT 3 ALERT active value                 //  1 << 3
#define ADS1X15_COMP_POL_ACTIV_LOW      0x0000
#define ADS1X15_COMP_POL_ACTIV_HIGH     0x0008

//  BIT 2 ALERT latching                     //  1 << 2
#define ADS1X15_COMP_NON_LATCH          0x0000
#define ADS1X15_COMP_LATCH              0x0004

//  BIT 0-1 ALERT mode                       //  (0..3)
#define ADS1X15_COMP_QUE_1_CONV         0x0000  //  trigger alert after 1 convert
#define ADS1X15_COMP_QUE_2_CONV         0x0001  //  trigger alert after 2 converts
#define ADS1X15_COMP_QUE_4_CONV         0x0002  //  trigger alert after 4 converts
#define ADS1X15_COMP_QUE_NONE           0x0003  //  disable comparator


//  _CONFIG masks
//
//  |  bit  |  description           |
//  |:-----:|:-----------------------|
//  |   0   |  # channels            |
//  |   1   |  -                     |
//  |   2   |  resolution            |
//  |   3   |  -                     |
//  |   4   |  GAIN supported        |
//  |   5   |  COMPARATOR supported  |
//  |   6   |  -                     |
//  |   7   |  -                     |
//
#define ADS_CONF_CHAN_1  0x00
#define ADS_CONF_CHAN_4  0x01
#define ADS_CONF_RES_12  0x00
#define ADS_CONF_RES_16  0x04
#define ADS_CONF_NOGAIN  0x00
#define ADS_CONF_GAIN    0x10
#define ADS_CONF_NOCOMP  0x00
#define ADS_CONF_COMP    0x20


//////////////////////////////////////////////////////
//
//  BASE CONSTRUCTOR
//
ADS1X15::ADS1X15()
{
  reset();
}


//////////////////////////////////////////////////////
//
//  PUBLIC
//
void ADS1X15::reset()
{
  setGain(0);      //  _gain = ADS1X15_PGA_6_144V;
  setMode(1);      //  _mode = ADS1X15_MODE_SINGLE;
  setDataRate(4);  //  middle speed, depends on device.

  //  COMPARATOR variables   #  see notes .h
  _compMode       = 0;
  _compPol        = 1;
  _compLatch      = 0;
  _compQueConvert = 3;
  _lastRequest    = 0xFFFF;  //  no request yet
}


bool ADS1X15::begin()
{
  if ((_address < 0x48) || (_address > 0x4B)) return false;
  if (! isConnected()) return false;
  return true;
}


bool ADS1X15::isConnected()
{
  _wire->beginTransmission(_address);
  return (_wire->endTransmission() == 0);
}


void ADS1X15::setGain(uint8_t gain)
{
  if (!(_config & ADS_CONF_GAIN)) gain = 0;
  switch (gain)
  {
    default:  //  catch invalid values and go for the safest gain.
    case 0:  _gain = ADS1X15_PGA_6_144V;  break;
    case 1:  _gain = ADS1X15_PGA_4_096V;  break;
    case 2:  _gain = ADS1X15_PGA_2_048V;  break;
    case 4:  _gain = ADS1X15_PGA_1_024V;  break;
    case 8:  _gain = ADS1X15_PGA_0_512V;  break;
    case 16: _gain = ADS1X15_PGA_0_256V;  break;
  }
}


uint8_t ADS1X15::getGain()
{
  if (!(_config & ADS_CONF_GAIN)) return 0;
  switch (_gain)
  {
    case ADS1X15_PGA_6_144V: return 0;
    case ADS1X15_PGA_4_096V: return 1;
    case ADS1X15_PGA_2_048V: return 2;
    case ADS1X15_PGA_1_024V: return 4;
    case ADS1X15_PGA_0_512V: return 8;
    case ADS1X15_PGA_0_256V: return 16;
  }
  _err = ADS1X15_INVALID_GAIN;
  return _err;
}


float ADS1X15::toVoltage(int16_t value)
{
  if (value == 0) return 0;

  float volts = getMaxVoltage();
  if (volts < 0) return volts;    //  propagate error

  volts *= value;
  if (_config & ADS_CONF_RES_16)
  {
    volts /= 32767;  //  value = 16 bits - sign bit = 15 bits mantissa
  }
  else
  {
    volts /= 2047;   //  value = 12 bits - sign bit = 11 bit mantissa
  }
  return volts;
}


float ADS1X15::getMaxVoltage()
{
  switch (_gain)
  {
    case ADS1X15_PGA_6_144V: return 6.144;
    case ADS1X15_PGA_4_096V: return 4.096;
    case ADS1X15_PGA_2_048V: return 2.048;
    case ADS1X15_PGA_1_024V: return 1.024;
    case ADS1X15_PGA_0_512V: return 0.512;
    case ADS1X15_PGA_0_256V: return 0.256;
  }
  _err = ADS1X15_INVALID_VOLTAGE;
  return _err;
}


void ADS1X15::setMode(uint8_t mode)
{
  switch (mode)
  {
    case 0: _mode = ADS1X15_MODE_CONTINUE; break;
    default:
    case 1: _mode = ADS1X15_MODE_SINGLE;   break;
  }
}


uint8_t ADS1X15::getMode(void)
{
  switch (_mode)
  {
    case ADS1X15_MODE_CONTINUE: return 0;
    case ADS1X15_MODE_SINGLE:   return 1;
  }
  _err = ADS1X15_INVALID_MODE;
  return _err;
}


void ADS1X15::setDataRate(uint8_t dataRate)
{
  _datarate = dataRate;
  if (_datarate > 7) _datarate = 4;  //  default
  _datarate <<= 5;      //  convert 0..7 to mask needed.
}


uint8_t ADS1X15::getDataRate(void)
{
  return (_datarate >> 5) & 0x07;  //  convert mask back to 0..7
}


int16_t ADS1X15::readADC(uint8_t pin)
{
  if (pin >= _maxPorts) return 0;
  uint16_t mode = ((4 + pin) << 12);  //  pin to mask
  return _readADC(mode);
}


int16_t ADS1X15::readADC_Differential_0_1()
{
  return _readADC(ADS1X15_MUX_DIFF_0_1);
}


int16_t ADS1X15::getValue()
{
  int16_t raw = _readRegister(_address, ADS1X15_REG_CONVERT);
  if (_bitShift) raw >>= _bitShift;  //  Shift 12-bit results
  return raw;
}


void ADS1X15::requestADC(uint8_t pin)
{
  if (pin >= _maxPorts) return;
  uint16_t mode = ((4 + pin) << 12);   //  pin to mask
  _requestADC(mode);
}


void  ADS1X15::requestADC_Differential_0_1()
{
  _requestADC(ADS1X15_MUX_DIFF_0_1);
}


bool ADS1X15::isBusy()
{
  return isReady() == false;
}


bool ADS1X15::isReady()
{
  uint16_t val = _readRegister(_address, ADS1X15_REG_CONFIG);
  return ((val & ADS1X15_OS_NOT_BUSY) > 0);
}


uint8_t ADS1X15::lastRequest()
{
  switch (_lastRequest)
  {
    case ADS1X15_READ_0:       return 0x00;
    case ADS1X15_READ_1:       return 0x01;
    case ADS1X15_READ_2:       return 0x02;
    case ADS1X15_READ_3:       return 0x03;
    //  technically 0x01 -- but would collide with READ_1
    case ADS1X15_MUX_DIFF_0_1: return 0x10;
    case ADS1X15_MUX_DIFF_0_3: return 0x30;
    case ADS1X15_MUX_DIFF_1_3: return 0x31;
    case ADS1X15_MUX_DIFF_2_3: return 0x32;
  }
  return 0xFF;
}


void ADS1X15::setComparatorMode(uint8_t mode)
{
  _compMode = mode == 0 ? 0 : 1;
}


uint8_t ADS1X15::getComparatorMode()
{
  return _compMode;
}


void ADS1X15::setComparatorPolarity(uint8_t pol)
{
  _compPol = pol ? 0 : 1;
}


uint8_t ADS1X15::getComparatorPolarity()
{
  return _compPol;
}


void ADS1X15::setComparatorLatch(uint8_t latch)
{
  _compLatch = latch ? 0 : 1;
}


uint8_t ADS1X15::getComparatorLatch()
{
  return _compLatch;
}


void ADS1X15::setComparatorQueConvert(uint8_t mode)
{
  _compQueConvert = (mode < 3) ? mode : 3;
}


uint8_t ADS1X15::getComparatorQueConvert()
{
  return _compQueConvert;
}


void ADS1X15::setComparatorThresholdLow(int16_t lo)
{
  _writeRegister(_address, ADS1X15_REG_LOW_THRESHOLD, lo);
}


int16_t ADS1X15::getComparatorThresholdLow()
{
  return _readRegister(_address, ADS1X15_REG_LOW_THRESHOLD);
};


void ADS1X15::setComparatorThresholdHigh(int16_t hi)
{
  _writeRegister(_address, ADS1X15_REG_HIGH_THRESHOLD, hi);
};


int16_t ADS1X15::getComparatorThresholdHigh()
{
  return _readRegister(_address, ADS1X15_REG_HIGH_THRESHOLD);
};


int8_t ADS1X15::getError()
{
  int8_t rv = _err;
  _err = ADS1X15_OK;
  return rv;
}


//////////////////////////////////////////////////////
//
//  EXPERIMENTAL
//
void ADS1X15::setWireClock(uint32_t clockSpeed)
{
  _clockSpeed = clockSpeed;
  _wire->setClock(_clockSpeed);
}

//  see https://github.com/RobTillaart/ADS1X15/issues/22
//      https://github.com/arduino/Arduino/issues/11457
//  TODO: get the real clock speed from the I2C interface if possible.
uint32_t ADS1X15::getWireClock()
{
//  UNO 328 and
#if defined(__AVR_ATmega328P__) || defined(__AVR_ATmega168__)
  uint32_t speed = F_CPU / ((TWBR * 2) + 16);
  return speed;

#elif defined(ESP32)
  return (uint32_t) _wire->getClock();

//  #elif defined(ESP8266)
//  core_esp8266_si2c.cpp holds the data see => void Twi::setClock(
//  not supported.
//  return -1;

#else  //  best effort is remembering it
  return _clockSpeed;
#endif
}


//////////////////////////////////////////////////////
//
//  PROTECTED
//
int16_t ADS1X15::_readADC(uint16_t readmode)
{
  _requestADC(readmode);
  if (_mode == ADS1X15_MODE_SINGLE)
  {
    while ( isBusy() ) yield();   //  wait for conversion; yield for ESP.
  }
  else
  {
    //  needed in continuous mode too, otherwise one get old value.
    delay(_conversionDelay);
  }
  return getValue();
}


void ADS1X15::_requestADC(uint16_t readmode)
{
  //  write to register is needed in continuous mode as other flags can be changed
  uint16_t config = ADS1X15_OS_START_SINGLE;  //  bit 15     force wake up if needed
  config |= readmode;                         //  bit 12-14
  config |= _gain;                            //  bit 9-11
  config |= _mode;                            //  bit 8
  config |= _datarate;                        //  bit 5-7
  if (_compMode)  config |= ADS1X15_COMP_MODE_WINDOW;         //  bit 4      comparator modi
  else            config |= ADS1X15_COMP_MODE_TRADITIONAL;
  if (_compPol)   config |= ADS1X15_COMP_POL_ACTIV_HIGH;      //  bit 3      ALERT active value
  else            config |= ADS1X15_COMP_POL_ACTIV_LOW;
  if (_compLatch) config |= ADS1X15_COMP_LATCH;
  else            config |= ADS1X15_COMP_NON_LATCH;           //  bit 2      ALERT latching
  config |= _compQueConvert;                                  //  bit 0..1   ALERT mode
  _writeRegister(_address, ADS1X15_REG_CONFIG, config);

  //  remember last request type.
    _lastRequest = readmode;
}


bool ADS1X15::_writeRegister(uint8_t address, uint8_t reg, uint16_t value)
{
  _wire->beginTransmission(address);
  _wire->write((uint8_t)reg);
  _wire->write((uint8_t)(value >> 8));
  _wire->write((uint8_t)(value & 0xFF));
  return (_wire->endTransmission() == 0);
}


uint16_t ADS1X15::_readRegister(uint8_t address, uint8_t reg)
{
  _wire->beginTransmission(address);
  _wire->write(reg);
  _wire->endTransmission();

  int rv = _wire->requestFrom((int) address, (int) 2);
  if (rv == 2)
  {
    uint16_t value = _wire->read() << 8;
    value += _wire->read();
    return value;
  }
  return 0x0000;
}



///////////////////////////////////////////////////////////////////////////
//
//  DERIVED CLASSES
//


///////////////////////////////////////////////////////////////////////////
//
//  ADS1013
//
ADS1013::ADS1013(uint8_t address, TwoWire *wire)
{
  _address = address;
  _wire = wire;
  _config = ADS_CONF_NOCOMP | ADS_CONF_NOGAIN | ADS_CONF_RES_12 | ADS_CONF_CHAN_1;
  _conversionDelay = ADS1015_CONVERSION_DELAY;
  _bitShift = 4;
  _maxPorts = 1;
  _gain     = ADS1X15_PGA_2_048V;  //  fixed value
}


//  ADS1x13 has no gain so set default.
//  Table 8. Config Register Field Descriptions
void ADS1013::setGain(uint8_t gain)
{
  _gain = gain;  //  keep compiler happy.
  _gain = ADS1X15_PGA_2_048V;  //  fixed value
}


uint8_t ADS1013::getGain()
{
  return 2;  //  fixed value
}


///////////////////////////////////////////////////////////////////////////
//
//  ADS1014
//
ADS1014::ADS1014(uint8_t address, TwoWire *wire)
{
  _address = address;
  _wire = wire;
  _config = ADS_CONF_COMP | ADS_CONF_GAIN | ADS_CONF_RES_12 | ADS_CONF_CHAN_1;
  _conversionDelay = ADS1015_CONVERSION_DELAY;
  _bitShift = 4;
  _maxPorts = 1;
}


///////////////////////////////////////////////////////////////////////////
//
//  ADS1015
//
ADS1015::ADS1015(uint8_t address, TwoWire *wire)
{
  _address = address;
  _wire = wire;
  _config = ADS_CONF_COMP | ADS_CONF_GAIN | ADS_CONF_RES_12 | ADS_CONF_CHAN_4;
  _conversionDelay = ADS1015_CONVERSION_DELAY;
  _bitShift = 4;
  _maxPorts = 4;
}


int16_t ADS1015::readADC_Differential_0_3()
{
  return _readADC(ADS1X15_MUX_DIFF_0_3);
}


int16_t ADS1015::readADC_Differential_1_3()
{
  return _readADC(ADS1X15_MUX_DIFF_1_3);
}


int16_t ADS1015::readADC_Differential_2_3()
{
  return _readADC(ADS1X15_MUX_DIFF_2_3);
}


int16_t ADS1015::readADC_Differential_0_2()
{
  return readADC(2) - readADC(0);
}


int16_t ADS1015::readADC_Differential_1_2()
{
  return readADC(2) - readADC(1);;
}


void ADS1015::requestADC_Differential_0_3()
{
  _requestADC(ADS1X15_MUX_DIFF_0_3);
}


void ADS1015::requestADC_Differential_1_3()
{
  _requestADC(ADS1X15_MUX_DIFF_1_3);
}


void ADS1015::requestADC_Differential_2_3()
{
  _requestADC(ADS1X15_MUX_DIFF_2_3);
}


///////////////////////////////////////////////////////////////////////////
//
//  ADS1113
//
ADS1113::ADS1113(uint8_t address, TwoWire *wire)
{
  _address = address;
  _wire = wire;
  _config = ADS_CONF_NOCOMP | ADS_CONF_NOGAIN | ADS_CONF_RES_16 | ADS_CONF_CHAN_1;
  _conversionDelay = ADS1115_CONVERSION_DELAY;
  _bitShift = 0;
  _maxPorts = 1;
  _gain     = ADS1X15_PGA_2_048V;  //  fixed value
}


//  ADS1x13 has no gain so set default.
//  Table 8. Config Register Field Descriptions
void ADS1113::setGain(uint8_t gain)
{
  _gain = gain;  //  keep compiler happy.
  _gain = ADS1X15_PGA_2_048V;  //  fixed value
}


uint8_t ADS1113::getGain()
{
  return 2;  //  fixed value
}


///////////////////////////////////////////////////////////////////////////
//
//  ADS1114
//
ADS1114::ADS1114(uint8_t address, TwoWire *wire)
{
  _address = address;
  _wire = wire;
  _config = ADS_CONF_COMP | ADS_CONF_GAIN | ADS_CONF_RES_16 | ADS_CONF_CHAN_1;
  _conversionDelay = ADS1115_CONVERSION_DELAY;
  _bitShift = 0;
  _maxPorts = 1;
}


///////////////////////////////////////////////////////////////////////////
//
//  ADS1115
//
ADS1115::ADS1115(uint8_t address, TwoWire *wire)
{
  _address = address;
  _wire = wire;
  _config = ADS_CONF_COMP | ADS_CONF_GAIN | ADS_CONF_RES_16 | ADS_CONF_CHAN_4;
  _conversionDelay = ADS1115_CONVERSION_DELAY;
  _bitShift = 0;
  _maxPorts = 4;
}


int16_t ADS1115::readADC_Differential_0_3()
{
  return _readADC(ADS1X15_MUX_DIFF_0_3);
}


int16_t ADS1115::readADC_Differential_1_3()
{
  return _readADC(ADS1X15_MUX_DIFF_1_3);
}


int16_t ADS1115::readADC_Differential_2_3()
{
  return _readADC(ADS1X15_MUX_DIFF_2_3);
}


int16_t ADS1115::readADC_Differential_0_2()
{
  return readADC(2) - readADC(0);
}


int16_t ADS1115::readADC_Differential_1_2()
{
  return readADC(2) - readADC(1);;
}


void ADS1115::requestADC_Differential_0_3()
{
  _requestADC(ADS1X15_MUX_DIFF_0_3);
}


void ADS1115::requestADC_Differential_1_3()
{
  _requestADC(ADS1X15_MUX_DIFF_1_3);
}


void ADS1115::requestADC_Differential_2_3()
{
  _requestADC(ADS1X15_MUX_DIFF_2_3);
}


//  -- END OF FILE --