Localization result based on 298c28e (#8277)

Author: dotnet-policy-service[bot]

l10n/bundle.l10n.cs.json

@@ -5,7 +5,7 @@
   "'{0}' was not set in the debug configuration.": "Nenastaveno v konfiguraci ladění: {0}",
   ".NET NuGet Restore": "Obnovení .NET NuGet",
   ".NET Test Log": "Protokol testů .NET",
-  ".NET: Generate Assets for Build and Debug": ".NET: Generate Assets for Build and Debug",
+  ".NET: Generate Assets for Build and Debug": ".NET: generovat prostředky pro sestavení a ladění",
   "1 reference": "1 odkaz",
   "A valid dotnet installation could not be found: {0}": "Nepovedlo se najít platnou instalaci rozhraní dotnet: {0}",
   "Active File Context": "Kontext aktivního souboru",
@@ -161,7 +161,7 @@
   "Synchronization timed out": "Vypršel časový limit synchronizace.",
   "Test run already in progress": "Už probíhá testovací běh.",
   "Text editor must be focused to fix all issues": "Aby bylo možné vyřešit všechny problémy, musí mít textový editor fokus.",
-  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?",
+  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "Příkaz {0} se nedoporučuje používat, když je nainstalováno rozšíření C# Dev Kit. Chcete místo toho sestavit a ladit pomocí dynamické konfigurace?",
   "The .NET Core SDK cannot be located: {0}. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path.": "Nelze nalézt sadu .NET Core SDK: {0}. Ladění .NET Core se nepovolí. Ujistěte se, že je sada .NET Core SDK nainstalovaná a umístěná v dané cestě.",
   "The .NET Core SDK located on the path is too old. .NET Core debugging will not be enabled. The minimum supported version is {0}.": "Sada .NET Core SDK umístěná v cestě je příliš stará. Ladění .NET Core se nepovolí. Minimální podporovaná verze je {0}.",
   "The C# extension for Visual Studio Code is incompatible on {0} {1} with the VS Code Remote Extensions. To see avaliable workarounds, click on '{2}'.": "Rozšíření jazyka C# pro Visual Studio Code není kompatibilní na {0} {1} se vzdálenými rozšířeními VS Code. Pokud chcete zobrazit dostupná alternativní řešení, klikněte na {2}.",

l10n/bundle.l10n.es.json

@@ -5,7 +5,7 @@
   "'{0}' was not set in the debug configuration.": "No se estableció '{0}' en la configuración de depuración.",
   ".NET NuGet Restore": "Restauración de NuGet de .NET",
   ".NET Test Log": "Registro de pruebas de .NET",
-  ".NET: Generate Assets for Build and Debug": ".NET: Generate Assets for Build and Debug",
+  ".NET: Generate Assets for Build and Debug": ".NET: Generar recursos para compilar y depurar",
   "1 reference": "1 referencia",
   "A valid dotnet installation could not be found: {0}": "No se encontró una instalación de dotnet válida: {0}",
   "Active File Context": "Contexto de archivo activo",
@@ -161,7 +161,7 @@
   "Synchronization timed out": "Tiempo de espera de sincronización agotado.",
   "Test run already in progress": "La ejecución de prueba ya está en curso",
   "Text editor must be focused to fix all issues": "El editor de texto debe estar centrado para corregir todos los problemas",
-  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?",
+  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "No se recomienda usar el comando \"{0}\" cuando se instala la extensión del Kit de desarrollo de C#. ¿Desea compilar y depurar mediante una configuración dinámica en su lugar?",
   "The .NET Core SDK cannot be located: {0}. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path.": "No se encuentra el SDK de .NET Core: {0}. No se habilitará la depuración de .NET Core. Asegúrese de que el SDK de .NET Core está instalado y en la ruta de acceso.",
   "The .NET Core SDK located on the path is too old. .NET Core debugging will not be enabled. The minimum supported version is {0}.": "El SDK de .NET Core ubicado en la ruta de acceso es muy antiguo. No se habilitará la depuración de .NET Core. La versión mínima admitida es {0}.",
   "The C# extension for Visual Studio Code is incompatible on {0} {1} with the VS Code Remote Extensions. To see avaliable workarounds, click on '{2}'.": "La extensión de C# para Visual Studio Code no es compatible en {0} {1}con las extensiones remotas VS Code. Para ver soluciones alternativas disponibles, haga clic en \"{2}\".",

l10n/bundle.l10n.ja.json

@@ -5,7 +5,7 @@
   "'{0}' was not set in the debug configuration.": "'{0}' はデバッグ構成で設定されませんでした。",
   ".NET NuGet Restore": ".NET NuGet 復元",
   ".NET Test Log": ".NET テスト ログ",
-  ".NET: Generate Assets for Build and Debug": ".NET: Generate Assets for Build and Debug",
+  ".NET: Generate Assets for Build and Debug": ".NET: ビルドとデバッグ用のアセットを生成",
   "1 reference": "1 個の参照",
   "A valid dotnet installation could not be found: {0}": "有効な dotnet インストールが見つかりませんでした: {0}",
   "Active File Context": "アクティブ ファイル コンテキスト",
@@ -161,7 +161,7 @@
   "Synchronization timed out": "同期がタイムアウトしました",
   "Test run already in progress": "テストの実行は既に進行中です",
   "Text editor must be focused to fix all issues": "すべての問題を解決するには、テキスト エディターにフォーカスを置く必要があります",
-  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?",
+  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "C# Dev Kit 拡張機能がインストールされている場合、'{0}' コマンドの使用は推奨されません。代わりに動的構成を使用してビルドとデバッグを行いますか?",
   "The .NET Core SDK cannot be located: {0}. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path.": ".NET Core SDKが見つかりません: {0}.NET Core デバッグは有効になりません。.NET Core SDK がインストールされ、パス上にあることを確認します。",
   "The .NET Core SDK located on the path is too old. .NET Core debugging will not be enabled. The minimum supported version is {0}.": "パスにある .NET Core SDK が古すぎます。.NET Core デバッグは有効になりません。サポートされている最小バージョンは {0} です。",
   "The C# extension for Visual Studio Code is incompatible on {0} {1} with the VS Code Remote Extensions. To see avaliable workarounds, click on '{2}'.": "Visual Studio Code の C# 拡張機能は、VS Code リモート拡張機能と {0} {1} で互換性がありません。回避策を確認するには、[{2}] をクリックします。",

l10n/bundle.l10n.ko.json

@@ -5,7 +5,7 @@
   "'{0}' was not set in the debug configuration.": "'{0}'이(가) 디버그 구성에서 설정되지 않았습니다.",
   ".NET NuGet Restore": ".NET NuGet 복원",
   ".NET Test Log": ".NET 테스트 로그",
-  ".NET: Generate Assets for Build and Debug": ".NET: Generate Assets for Build and Debug",
+  ".NET: Generate Assets for Build and Debug": ".NET: 빌드 및 디버그를 위한 자산 생성",
   "1 reference": "참조 1개",
   "A valid dotnet installation could not be found: {0}": "유효한 dotnet 설치를 찾을 수 없습니다: {0}",
   "Active File Context": "활성 파일 컨텍스트",
@@ -161,7 +161,7 @@
   "Synchronization timed out": "동기화가 시간 초과됨",
   "Test run already in progress": "테스트 실행이 이미 진행 중입니다.",
   "Text editor must be focused to fix all issues": "모든 문제를 해결하려면 텍스트 편집기에 포커스가 있어야 합니다.",
-  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?",
+  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "C# Dev Kit 확장이 설치된 경우 '{0}' 명령을 사용하지 않는 것이 좋습니다. 대신 동적 구성을 사용하여 빌드하고 디버그하시겠습니까?",
   "The .NET Core SDK cannot be located: {0}. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path.": ".NET Core SDK를 찾을 수 없습니다: {0}. .NET Core 디버깅을 사용할 수 없습니다. .NET Core SDK가 설치되어 있고 경로에 있는지 확인합니다.",
   "The .NET Core SDK located on the path is too old. .NET Core debugging will not be enabled. The minimum supported version is {0}.": "경로에 있는 .NET Core SDK가 너무 오래되었습니다. .NET Core 디버깅을 사용할 수 없습니다. 지원되는 최소 버전은 {0} 입니다.",
   "The C# extension for Visual Studio Code is incompatible on {0} {1} with the VS Code Remote Extensions. To see avaliable workarounds, click on '{2}'.": "Visual Studio Code의 C# 확장은 VS Code 원격 확장과 {0} {1}에서 호환되지 않습니다. 사용 가능한 해결 방법을 보려면 '{2}'을(를) 클릭하세요.",

l10n/bundle.l10n.zh-cn.json

@@ -5,7 +5,7 @@
   "'{0}' was not set in the debug configuration.": "未在调试配置中设置“{0}”。",
   ".NET NuGet Restore": ".NET NuGet 还原",
   ".NET Test Log": ".NET 测试日志",
-  ".NET: Generate Assets for Build and Debug": ".NET: Generate Assets for Build and Debug",
+  ".NET: Generate Assets for Build and Debug": ".NET: 生成用于生成和调试的资产",
   "1 reference": "1 个引用",
   "A valid dotnet installation could not be found: {0}": "找不到有效的 dotnet 安装: {0}",
   "Active File Context": "活动文件上下文",
@@ -161,7 +161,7 @@
   "Synchronization timed out": "同步超时",
   "Test run already in progress": "试运行已在进行中",
   "Text editor must be focused to fix all issues": "文本编辑器必须专注于解决所有问题",
-  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?",
+  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "安装 C# 开发工具包扩展时，不建议使用“{0}”命令。是否要改用动态配置进行生成和调试?",
   "The .NET Core SDK cannot be located: {0}. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path.": "找不到 .NET Core SDK 的位置：{0}。将不会启用 .NET Core 调试。请确保已安装 .NET Core SDK 且该 SDK 位于路径上。",
   "The .NET Core SDK located on the path is too old. .NET Core debugging will not be enabled. The minimum supported version is {0}.": "位于路径上的 .NET Core SDK 太旧。将不会启用 .NET Core 调试。支持的最低版本为 {0}。 ",
   "The C# extension for Visual Studio Code is incompatible on {0} {1} with the VS Code Remote Extensions. To see avaliable workarounds, click on '{2}'.": "Visual Studio Code 的 C# 扩展在 {0} {1} 上与 VS Code 远程扩展不兼容。若要查看可用的解决方法，请单击“{2}”。",

l10n/bundle.l10n.zh-tw.json

@@ -5,7 +5,7 @@
   "'{0}' was not set in the debug configuration.": "未在偵錯設定中設定 '{0}'。",
   ".NET NuGet Restore": ".NET NuGet 還原",
   ".NET Test Log": ".NET 測試記錄",
-  ".NET: Generate Assets for Build and Debug": ".NET: Generate Assets for Build and Debug",
+  ".NET: Generate Assets for Build and Debug": ".NET: 產生用於建置和偵錯的資產",
   "1 reference": "1 個參考",
   "A valid dotnet installation could not be found: {0}": "找不到有效的 dotnet 安裝: {0}",
   "Active File Context": "使用中檔案內容",
@@ -161,7 +161,7 @@
   "Synchronization timed out": "同步已逾時",
   "Test run already in progress": "測試執行已在進行中",
   "Text editor must be focused to fix all issues": "必須聚焦於文字編輯器，才能修正全部問題",
-  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?",
+  "The '{0}' command is not recommended to be used when C# Dev Kit extension is installed. Would you like build and debug using a dynamic configuration instead?": "安裝 C# 開發人員套件延伸模組時，不建議使用 '{0}' 命令。您要改用動態設定進行建置和偵錯嗎?",
   "The .NET Core SDK cannot be located: {0}. .NET Core debugging will not be enabled. Make sure the .NET Core SDK is installed and is on the path.": "找不到 .NET Core SDK: {0}。將無法啟用 .NET Core 偵錯。確定 .NET Core SDK 已安裝且位於路徑上。",
   "The .NET Core SDK located on the path is too old. .NET Core debugging will not be enabled. The minimum supported version is {0}.": "位於路徑上的 .NET Core SDK 太舊。將無法啟用 .NET Core 偵錯。最低的支援版本為 {0}。",
   "The C# extension for Visual Studio Code is incompatible on {0} {1} with the VS Code Remote Extensions. To see avaliable workarounds, click on '{2}'.": "適用於 Visual Studio Code 的 C# 延伸模組在 {0} {1} 上與 VS Code 遠端延伸模組不相容。若要查看可用的因應措施，請按一下 '{2}'。",