Vaillant missing Heating Circuits from autoconfig

[peedign]

Description

autoconfig is not picking up 1 out of 2 VR70 and none of the VR92. Occassinally the scan picks up some signal under address ec and assigns a solar slave device, which is actually not existing.

Actual behavior

some slave devices are not getting automatically scanned

Expected behavior

all slave devices are scanned properly

ebusd version

current source from git

ebusd arguments

N/A

Operating system

other

CPU architecture

arm64

Dockerized

None

Hardware interface

Adapter Shield v5 via WiFi

Related integration

MQTT Home Assistant via mqtt-hassio.cfg

Logs

max symbol rate: 228
min arbitration micros: 10
max arbitration micros: 988
min symbol latency: 5
max symbol latency: 60
scan: finished, some messages pending
reconnects: 0
masters: 7
messages: 707
conditional: 0
poll: 276
update: 29
address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=HMU00;SW=0522;HW=5103", loaded "vaillant/08.hmu.csv"
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=CTLV2;SW=0514;HW=1104", loaded "vaillant/15.ctlv2.csv"
address 26: slave, scanned "MF=Vaillant;ID=VR_71;SW=0100;HW=5904", loaded "vaillant/26.vr_71.csv"
address 30: master #3
address 31: master #8, ebusd
address 35: slave #3, scanned "MF=Vaillant;ID=VR_92;SW=0514;HW=1204"
address 36: slave #8, ebusd
address 52: slave, scanned "MF=Vaillant;ID=VR_70;SW=0101;HW=5804", loaded "vaillant/52.vr_70.csv"
address 53: slave, scanned "MF=Vaillant;ID=VR_70;SW=0101;HW=5804"
address 70: master #4
address 71: master #9
address 75: slave #4, scanned "MF=Vaillant;ID=VR_92;SW=0514;HW=1204"
address 76: slave #9, scanned "MF=Vaillant;ID=VWZ00;SW=0522;HW=5103", loaded "vaillant/76.vwz.csv"

Discussed in #1454

[jan666]

for VR70 maybe have a look at #1113 (comment)

[peedign]

unfortunately, that did not help. I think ebusd ignores the second VR_70 completely

[JonesGW-MGD]

Did you try creating a copy of 52.vr_70.csv as 53.vr_70.csv as suggested here: #1454 (reply in thread)

[peedign]

Indeed I tried a number of times, various ways, following your hints.

I think something is not quite right with my setup as no csv was loaded at all after local scans (beside vr_70s). Now I'm reinstalling HA ebusd add-on. Though, I am still hoping for a fix for the online config at some point.

[JonesGW-MGD]

Cool - well, when you get all the config files loaded locally that you had previously when you used the repository service, maybe resurrect your previous 'discussion' thread with some updates and the community may be able to help get the wiring centre and controllers recognised too.

The fact that ebusd 'found' a solar element that isn't in your set up would worry me though, although 'one problem at a time'!