Skip to content

BOM #6

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
JanMrlth opened this issue Dec 19, 2019 · 7 comments
Open

BOM #6

JanMrlth opened this issue Dec 19, 2019 · 7 comments

Comments

@JanMrlth
Copy link

JanMrlth commented Dec 19, 2019

I ordered the parts on digikey and tried to replace the LCSC-Components.
http://www.digikey.de/short/p1dcp2

I was not able to find a replacement for L1 - L3
Do you think this might work although it is only rated for 1.15A instead of 3A? I never worked with Inductrs before and have no idea what to look for.
https://www.digikey.de/product-detail/en/MLZ2012N1R0LT000/445-6756-1-ND/2523577/?itemSeq=312817283

As an alternative I ordered these. They have only 55mOhm but 3.3A.
https://www.digikey.de/product-detail/en/CIGT201208EH1R0MNE/1276-6886-1-ND/7041286/?itemSeq=312817286

I'm an getting exited! :) Hope to see you in Leipzig.

@JanMrlth
Copy link
Author

Hi Niklas,

which exact USB-receptacle do you use?
These look promissing:
https://lcsc.com/product-detail/USB-Connectors_Jing-Extension-of-the-Electronic-Co-Jing-Extension-of-the-Electronic-Co-USB-3-1-C-16PF-SMT2-0Type_C167321.html

Do you have any left over, that you could bring to 36C3?
Cheers
Jan

@judge2005
Copy link

Hi Jan.

That BOM you linked to at digikey above, is it complete? did it work?

BTW, what lcsc components are you referring to?

@JanMrlth
Copy link
Author

Yes, it worked.

If I remember correctly:
The C-1206 arround the mosfets should be 50V instead. (C39,42 - C34,C41 - C16...)
The USB-connector is from LSCS - see link above.
Cave: The Silkscreen for R5 and R11 is interchanged.
You do not really need the SW1 - it is only pressed once for programming.

Have fun!

@judge2005
Copy link

judge2005 commented Jun 21, 2020

Thanks Jan, that;s good to know. BTW which of the inductor options did you use for L1-L3?

I also found this USB connector on Digikey:
https://www.digikey.com/product-detail/en/gct/USB4105-GF-A/2073-USB4105-GF-ACT-ND/11198510

It looks identical to https://lcsc.com/product-detail/USB-Connectors_XKB-Enterprise-U262-16XN-4BVC11_C319148.html

@designingSparks
Copy link

What is the voltage rating of C17-19? It's not stated on the schematic or iBOM.

@JanMrlth
Copy link
Author

e.g. IMG_20200630_210302
IMG_20200630_210325

@judge2005
Copy link

I know this isn't directly related to the BOM, but I wonder if you can answer it: Am I supposed to be able to see the discharge even if I am not playing any music?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

3 participants