SituationManager.lua

local LibCamera = LibStub("LibCamera-1.0")
local LibEasing = LibStub("LibEasing-1.0")






-- The transition time of SetView() is hard to predict.
-- Use this for now.
local SET_VIEW_TRANSITION_TIME = 0.5




------------
-- LOCALS --
------------

local function Round(num, numDecimalPlaces)
  local mult = 10^(numDecimalPlaces or 0)
  return math.floor(num * mult + 0.5) / mult
end



------------
-- EVENTS --
------------

DynamicCam.events = {}

-- The user may try to register invalid events. In order to prevent AceEvent-3.0
-- from remembering invalid events, we have to check if an event exists ourselves!
-- https://www.wowinterface.com/forums/showthread.php?t=58681
local eventExistsFrame = CreateFrame("Frame");
local function EventExists(event)
  local exists = pcall(eventExistsFrame.RegisterEvent, eventExistsFrame, event)
  if exists then eventExistsFrame:UnregisterEvent(event) end
  return exists
end


function DynamicCam:EventHandler(event, ...)

  -- To be less spammy, we ignore all UNIT_AURA events not belonging to player.
  -- ...until anyone comes up with a situation for which they need other player's UNIT_AURA events.
  if event == "UNIT_AURA" and ... ~= "player" then
    -- print("Ignoring non-player UNIT_AURA")
    return
  end

  -- print("Eventhandler got", event, ...)


  -- When entering combat, we have to act now.
  -- Otherwise, we might not be able to call protected functions like UIParent:Show().
  if event == "PLAYER_REGEN_DISABLED" then
    self:EvaluateSituations()
  else
    self.evaluateSituationsNextFrame = true
  end
end

function DynamicCam:RegisterEvents()
  self:RegisterEvent("PLAYER_CONTROL_GAINED", "EventHandler")

  for situationID, situation in pairs(self.db.profile.situations) do
    if situation.enabled and not situation.errorEncountered then
      self:RegisterSituationEvents(situationID)
    end
  end
end

function DynamicCam:RegisterSituationEvents(situationID)
  -- print("RegisterSituationEvents", situationID)
  local situation = self.db.profile.situations[situationID]

  if situation and situation.events then
    for i, event in pairs(situation.events) do
      if not self.events[event] then

        -- We have to check if the event exists ourselves.
        -- https://www.wowinterface.com/forums/showthread.php?t=58681
        if not EventExists(event) then
          DynamicCam:ScriptError(situationID, "events", "events", "Trying to register an unknown event: " .. event)
          -- print("Trying to register an unknown event: ", event)

        else

          -- If the event does exist, we should never get any problems here,
          -- but just to be on the safe side:
          local result = {pcall(DynamicCam.RegisterEvent, DynamicCam, event, "EventHandler")}
          if result[1] == false then
            -- print("Not registered for event:", event)
            DynamicCam:ScriptError(situationID, "events", "events", result[2])
          else
            -- print("Registered for event:", event)
            self.events[event] = true
          end

        end
      end
    end
  end
end




-------------
-- SCRIPTS --
-------------

local functionCache = {}
local situationEnvironments = {}
function DynamicCam:RunScript(situationID, scriptID)

  local script = DynamicCam.db.profile.situations[situationID][scriptID]

  if not script or script == "" then return end

  -- make sure that we're not creating tables willy nilly
  if not functionCache[situationID] then
    functionCache[situationID] = {}
  end


  if not functionCache[situationID][scriptID] or functionCache[situationID][scriptID] ~= script then

    local f, msg = loadstring(script)
    if not f then
      DynamicCam:ScriptError(situationID, scriptID, "syntax", msg)
      return nil
    else
      functionCache[situationID][scriptID] = f
    end

    -- if env, set the environment to that
    if situationID then
      if not situationEnvironments[situationID] then
        situationEnvironments[situationID] = setmetatable({}, { __index =
          function(t, k)
            if k == "_G" then
              return t
            elseif k == "this" then
              return situationEnvironments[situationID].this
            else
              return _G[k]
            end
          end
        })
        situationEnvironments[situationID].this = {}
      end

      setfenv(functionCache[situationID][scriptID], situationEnvironments[situationID])
    end
  end


  local result = {pcall(functionCache[situationID][scriptID])}

  if result[1] == false then
    DynamicCam:ScriptError(situationID, scriptID, "runtime", result[2])
    return nil
  else
    tremove(result, 1)
    -- print(DynamicCam.db.profile.situations[situationID].name, unpack(result))
    return unpack(result)
  end

end





-- For errors in scripts.

-- TODO: Later with localisation:
local scriptNames = {
  executeOnInit = "Initialisation Script",
  condition = "Condition Script",
  executeOnEnter = "On-Enter Script",
  executeOnExit = "On-Exit Script",
  events = "Events",
}

-- Export box for the script error dialog:
local scrollBoxWidth = 400
local scrollBoxHeight = 90

local outerFrame = CreateFrame("Frame")
outerFrame:SetSize(scrollBoxWidth + 80, scrollBoxHeight + 20)

local borderFrame = CreateFrame("Frame", nil, outerFrame, "TooltipBackdropTemplate")
borderFrame:SetSize(scrollBoxWidth + 34, scrollBoxHeight + 10)
borderFrame:SetPoint("CENTER")

local scrollFrame = CreateFrame("ScrollFrame", nil, outerFrame, "UIPanelScrollFrameTemplate")
scrollFrame:SetPoint("CENTER", -10, 0)
scrollFrame:SetSize(scrollBoxWidth, scrollBoxHeight)

local editbox = CreateFrame("EditBox", nil, scrollFrame, "InputBoxScriptTemplate")
editbox:SetMultiLine(true)
editbox:SetAutoFocus(false)
editbox:SetFontObject(ChatFontNormal)
editbox:SetWidth(scrollBoxWidth)
editbox:SetCursorPosition(0)
scrollFrame:SetScrollChild(editbox)


local hideDefaultButton = false

-- The script error dialog.
StaticPopupDialogs["DYNAMICCAM_SCRIPT_ERROR"] = {

  timeout = 0,
  whileDead = true,
  hideOnEscape = true,
  preferredIndex = 3,  -- avoid some UI taint, see https://authors.curseforge.com/forums/world-of-warcraft/general-chat/lua-code-discussion/226040-how-to-reduce-chance-of-ui-taint-from

  text = "%s",

  OnShow = function (self)
    self.ludius_originalTextWidth = self.text:GetWidth()
    self.text:SetWidth(borderFrame:GetWidth())
  end,
  OnHide = function(self)
    self.text:SetWidth(self.ludius_originalTextWidth)
    self.ludius_originalTextWidth = nil
  end,

  -- So that we can have different functions for each button.
  selectCallbackByIndex = true,

  button1 = "Dismiss",
  OnButton1 = function() end,

  button2 = "Disable situation",
  OnButton2 = function(_, data)
    DynamicCam.db.profile.situations[data.situationID].enabled = false
    DynamicCam:EvaluateSituations()
    LibStub("AceConfigRegistry-3.0"):NotifyChange("DynamicCam")
  end,

  button3 = "Fix manually",
  OnButton3 = function(_, data)
    -- if data then print(data.situationID, data.scriptID) end
    DynamicCam:OpenMenu()
    LibStub("AceConfigDialog-3.0"):SelectGroup("DynamicCam", "situationSettingsTab", "situationControls", data.scriptID)
    DynamicCam.Options:SelectSituation(data.situationID)
  end,

  button4 = "Reset to default",
  OnButton4 = function(_, data)
    -- if data then print(data.situationID, data.scriptID) end
    DynamicCam.db.profile.situations[data.situationID][data.scriptID] = DynamicCam.defaults.profile.situations[data.situationID][data.scriptID]
    DynamicCam:UpdateSituation(data.situationID)
    LibStub("AceConfigRegistry-3.0"):NotifyChange("DynamicCam")
  end,
  DisplayButton4 = function() return not hideDefaultButton end,

}


function DynamicCam:ScriptError(situationID, scriptID, errorType, errorMessage)

  -- print(situationID, scriptID, errorType, errorMessage)

  local situation = DynamicCam.db.profile.situations[situationID]

  situation.errorEncountered = scriptID
  situation.errorMessage = errorMessage

  local situationName = situation.name
  local scriptName = scriptNames[scriptID]

  -- If the cause is in the init script instead of the one triggering the error.
  local scriptIdForButton = scriptID

  local isCustomSituation = true
  local alreadyUsingDefault = true
  if DynamicCam.defaults.profile.situations[situationID] then
    isCustomSituation = false
    if scriptID == "events" then
      alreadyUsingDefault = DynamicCam:EventsEqual(situation.events, DynamicCam.defaults.profile.situations[situationID].events)
    else
      alreadyUsingDefault = DynamicCam:ScriptEqual(situation[scriptID], DynamicCam.defaults.profile.situations[situationID][scriptID])
    end
  end

  local text = "There is a problem with your DynamicCam Situation Controls!\n(Situation: " .. situationName .. "," .. scriptName .. ")\n\n"

  if isCustomSituation then
    text = text .. "This error is caused by one of your custom situations, so you have to resolve it yourself or seek assistance online.\n\n"
  elseif alreadyUsingDefault then
    if scriptID ~= "executeOnInit" and not DynamicCam:ScriptEqual(situation["executeOnInit"], DynamicCam.defaults.profile.situations[situationID]["executeOnInit"]) then
      text = text .. "You have modified the Initialisation Script of this DynamicCam stock situation which is probably leading to this error. A reset to the default should resolve this. Otherwise you can try to fix it manually or disable the situation.\n\n"
      scriptIdForButton = "executeOnInit"
      alreadyUsingDefault = false
    else
      text = text .. "This is really embarrassing, because this error is caused by the default settings of a DynamicCam stock situation. Please copy the error message below and send it to us on GitHub, Curseforge or WoWInterface. In the meantime you can try to fix it yourself or just disable this situation. Sorry!\n\n"
    end
  else
    text = text .. "You have modified the default settings of this DynamicCam stock situation. A reset to the default should resolve this. Otherwise you can try to fix it manually or disable the situation.\n\n"
  end

  local errorText = "Error: " .. situationName .. " (" .. situationID .. "), " .. scriptID .. ", " .. errorType .. "\n\n" .. errorMessage .. "\n\n\n"
  editbox:SetText(errorText)

  -- Data for the button press functions.
  local data = {
    ["situationID"] = situationID,
    ["scriptID"] = scriptIdForButton,
  }

  -- Only show the default button, if there is a default to return to.
  hideDefaultButton = isCustomSituation or alreadyUsingDefault
  StaticPopup_Show("DYNAMICCAM_SCRIPT_ERROR", text, nil, data, outerFrame)
end










---------------------
-- NPC INTERACTION --
---------------------

-- For EvaluateSituations() below.
-- So the transition has to wait a little.
local moreQuestDialog = false
local unsetMoreQuestDialogTimer = nil
local waitForQuestFrameToReopen = 0.3


-- GetNumActiveQuests() does not exist in classic.
if WOW_PROJECT_ID ~= WOW_PROJECT_CLASSIC then

  -- When an NPC has more than one quest, after accepting/returning the first quest,
  -- the QuestFrame disappears for a short time, which momentarily exits
  -- the NPC interaction situation (not looking nice).
  -- Unfortunately, when exiting the situation, there is no direct way to determine if
  -- the NPC still has quests or if a quest was just accepted.
  -- The QUEST_ACCEPTED event comes a few frames after the PLAYER_INTERACTION_MANAGER_FRAME_HIDE
  -- and QUEST_FINISHED events which are also the only indicators of the quest frame closing
  -- without accepting a quest.
  -- That's why we have to do some tricks to know that the NPC still has quests when exiting
  -- the situation, so we can enforce an extra delay of 0.3 seconds (should be enough).
  local questFrameClosed = true
  local lastQuestFrameCloseTime = GetTime()

  local moreQuestDialogFrame = CreateFrame("Frame")
  moreQuestDialogFrame:RegisterEvent("QUEST_GREETING")
  moreQuestDialogFrame:RegisterEvent("GOSSIP_SHOW")
  moreQuestDialogFrame:RegisterEvent("QUEST_DETAIL")
  moreQuestDialogFrame:RegisterEvent("QUEST_ACCEPTED")
  moreQuestDialogFrame:RegisterEvent("QUEST_REMOVED")  -- For finishing quests.
  moreQuestDialogFrame:RegisterEvent("QUEST_COMPLETE") -- To check if a quest about to be finished in is part of a quest line.
  moreQuestDialogFrame:SetScript("OnEvent", function(_, event)

    if event == "QUEST_GREETING" or event == "GOSSIP_SHOW" then

      -- print(event, "available quests", C_GossipInfo.GetNumAvailableQuests(), GetNumAvailableQuests())
      -- print(event, "active quests", C_GossipInfo.GetNumActiveQuests(), GetNumActiveQuests())
      -- Find out if the active quests can actually be turned in. Because only then do we want to count them.
      -- We need C_GossipInfo.GetNumAvailableQuests and GetNumAvailableQuests, because
      -- apparently one is for normal quests and the other for campaign quests.
      local completeQuests = 0
      if C_GossipInfo.GetNumActiveQuests() > 0 then
        for _, v in pairs(C_GossipInfo.GetActiveQuests()) do
          -- print(v.title, v.isComplete)
          if v.isComplete then
            completeQuests = completeQuests + 1
          end
        end
      elseif GetNumActiveQuests() > 0 then
        for i=1, GetNumActiveQuests() do
          local title, isComplete = GetActiveTitle(i)
          -- print(title, isComplete)
          if isComplete then
            completeQuests = completeQuests + 1
          end
        end
      end

      -- print(event, "(probably) complete quests", completeQuests)


      if (C_GossipInfo.GetNumAvailableQuests() + completeQuests > 1) or (GetNumAvailableQuests() + completeQuests > 1) then
        -- print(GetTime(), event, "setting moreQuestDialog to TRUE.")
        DynamicCam:CancelTimer(unsetMoreQuestDialogTimer)
        moreQuestDialog = true
        questFrameClosed = false
      end


    -- When the quest detail view is shown, we reset moreQuestDialog,
    -- unless we have set moreQuestDialog before without the quest
    -- frame being closed.
    elseif event == "QUEST_DETAIL" then
      if questFrameClosed then
        -- print(GetTime(), event, "setting moreQuestDialog to FALSE.")
        moreQuestDialog = false
      end

    -- Sometimes QUEST_ACCEPTED comes after the quest frame has been reopened. Therefore we check GetNumAvailableQuests too.
    elseif (event == "QUEST_ACCEPTED" or event == "QUEST_REMOVED") and C_GossipInfo.GetNumAvailableQuests() == 0 and GetNumAvailableQuests() == 0 then
      -- print(GetTime(), event, "setting moreQuestDialog to FALSE.")
      moreQuestDialog = false
      questFrameClosed = true




    -- -- TODO: Use grail to determine if NPC has a follow-up quest.
    -- elseif event == "QUEST_COMPLETE" then
      -- print(event, "About to turn in a quest.")


      -- questID = GetQuestID()

      -- print(GetTitleText(), questID)

      -- local questLineInfo = C_QuestLine.GetQuestLineInfo(questID, C_Map.GetBestMapForUnit("player"))

      -- DynamicCam:PrintTable(questLineInfo, 0)

      -- local questLineID = questLineInfo.questLineID



      -- print(questLineID)


      -- local questIDs = C_QuestLine.GetQuestLineQuests(questLineID)

      -- for k, v in pairs(questIDs) do

        -- print("----------------------", v)

        -- local questLineInfo = C_QuestLine.GetQuestLineInfo(v, C_Map.GetBestMapForUnit("player"))

        -- if questLineInfo then
          -- DynamicCam:PrintTable(questLineInfo, 0)
        -- end

        -- print("----------------------")

      -- end


      -- DynamicCam:PrintTable(questIDs, 0)

      -- print("ha", C_QuestLog.GetNextWaypoint(questID))


    end

  end)


  -- Cannot use PLAYER_INTERACTION_MANAGER_FRAME_HIDE or QUEST_FINISHED to update
  -- questFrameClosed, because this gets called at every QuestFrame transition.
  -- We therefore check if the QuestFrame was really closed.
  QuestFrame:HookScript("OnHide", function()
    -- print("QuestFrame closed", GetTime())
    questFrameClosed = true
    lastQuestFrameCloseTime = GetTime()
  end)
  -- When switching to the quest detail view the QuestFrame gets closed and reopened within one frame.
  QuestFrame:HookScript("OnShow", function()
    -- print("QuestFrame shown", GetTime())
    if lastQuestFrameCloseTime == GetTime() then
      questFrameClosed = false
    end
  end)

  if ImmersionFrame then
    ImmersionFrame:HookScript("OnHide", function()
      -- print("ImmersionFrame closed", GetTime())
      questFrameClosed = true
    end)
  end

end







-- Start rotating when entering a situation.
local function StartRotation(newSituation, transitionTime)
  local r = newSituation.rotation
  local profile = DynamicCam.db.profile

  if r.enabled then
    if r.rotationType == "continuous" then

      LibCamera:BeginContinuousYaw(r.rotationSpeed, transitionTime)

    elseif r.rotationType == "degrees" then

      if r.yawDegrees ~= 0 then
        LibCamera:Yaw(r.yawDegrees, transitionTime, LibEasing[profile.easingYaw])
      end
      if r.pitchDegrees ~= 0 then
        LibCamera:Pitch(r.pitchDegrees, transitionTime, LibEasing[profile.easingPitch])
      end

    end
  end
end


-- Stop rotating when leaving a situation.
local function StopRotation(oldSituation)
  local r = oldSituation.rotation
  local profile = DynamicCam.db.profile
  if r.enabled then
    if r.rotationType == "continuous" then
      local yaw = LibCamera:StopYawing()

      -- rotate back if we want to
      if r.rotateBack then
        -- print("Ended rotate, degrees rotated, yaw:", yaw)
        if yaw then
          local yawBack = yaw % 360

          -- we're beyond 180 degrees, go the other way
          if yawBack > 180 then
            yawBack = yawBack - 360
          end

          LibCamera:Yaw(-yawBack, r.rotateBackTime, LibEasing[profile.easingYaw])
        end
      end
    elseif r.rotationType == "degrees" then
      if LibCamera:IsRotating() then
        -- interrupted rotation
        local yaw, pitch = LibCamera:StopRotating()

        -- rotate back if we want to
        if r.rotateBack then
          -- print("Ended rotate early, degrees rotated, yaw:", yaw, "pitch:", pitch)
          if yaw then
            LibCamera:Yaw(-yaw, r.rotateBackTime, LibEasing[profile.easingYaw])
          end

          if pitch then
            LibCamera:Pitch(-pitch, r.rotateBackTime, LibEasing[profile.easingPitch])
          end
        end
      else
        if r.rotateBack then
          if r.yawDegrees ~= 0 then
            LibCamera:Yaw(-r.yawDegrees, r.rotateBackTime, LibEasing[profile.easingYaw])
          end

          if r.pitchDegrees ~= 0 then
            LibCamera:Pitch(-r.pitchDegrees, r.rotateBackTime, LibEasing[profile.easingPitch])
          end
        end
      end
    end
  end
end




-- To store the last zoom when leaving a situation.
local lastZoom = {}

-- To store the previous situation when entering another situation.
local lastSituation = {}
-- Depending on the "Restore Zoom" setting, a user may want to always restore
-- the last zoom when returning to a previous situation. Only for the "adaptive"
-- setting (which is actually the original way DynamicCam did it) we also have
-- to remember the last situation, because we only restore the zoom when returning
-- to the same situation we came from.



-- Used by ChangeSituation() to determine if a stored zoom should
-- be restored when returning to a situation.
local function ShouldRestoreZoom(oldSituationID, newSituationID)

  -- print("Should Restore Zoom")

  if DynamicCam.db.profile.zoomRestoreSetting == "never" then
    -- print("Setting is never.")
    return false
  end


  -- Restore if we're just exiting a situation, and have a stored value for default.
  -- (This is the case for both "always" and "adaptive".)
  if not newSituationID then
    if lastZoom["no-situation"] then
      -- print("Restoring saved zoom for no-situation.", lastZoom["no-situation"])
      return true, lastZoom["no-situation"]
    else
      -- print("Not restoring zoom because returning to no-situation with no saved value.")
      return false
    end
  end


  -- Don't restore if we don't have a saved zoom value.
  -- (Also the case for both "always" and "adaptive".)
  if not lastZoom[newSituationID] then
    -- print("Not restoring zoom because we have no saved value for this situation.")
    return false
  end

  -- From now on we know that we are entering a new situation and have a stored zoom.

  local newSituation = DynamicCam.db.profile.situations[newSituationID]
  -- Don't restore zoom if we're about to go into a view.
  if newSituation.viewZoom.enabled and newSituation.viewZoom.viewZoomType == "view" then
    -- print("Not restoring zoom because entering a view.")
    return false
  end


  local restoreZoom = lastZoom[newSituationID]
  if DynamicCam.db.profile.zoomRestoreSetting == "always" then
    -- print("Setting is always.")
    return true, restoreZoom
  end


  -- The following are for the zoomRestoreSetting == "adaptive" setting.
  -- print("Setting is adaptive.")

  -- Only restore zoom if returning to the same situation
  if oldSituationID and lastSituation[oldSituationID] ~= newSituationID then
    -- print("Not restoring zoom because this is not the situation we came from.")
    return false
  end


  local c = newSituation.viewZoom
  -- Restore zoom based on newSituation viewZoomType.
  if not c.enabled or c.viewZoomType ~= "zoom" then
    -- print("Not restoring zoom because new situation has no zoom setting.")
    return false
  end

  if c.zoomType == "set" then
    -- print("Not restoring zoom because new situation has a fixed zoom setting.")
    return false
  end

  if c.zoomType == "range" then
    -- only restore zoom if zoom will be in the range
    if c.zoomMin <= restoreZoom + .5 and
       c.zoomMax >= restoreZoom - .5 then
      return true, restoreZoom
    else
      return false
    end
  end

  if c.zoomType == "in" then
    -- Only restore if the stored zoom level is smaller or equal to the situation value
    -- and do not zoom out.
    if c.zoomValue >= restoreZoom - .5 and GetCameraZoom() > restoreZoom then
      return true, restoreZoom
    else
      -- print("Not restoring because saved value", restoreZoom, "is not smaller than zoom IN of situation.")
      return false
    end
  elseif c.zoomType == "out" then
    -- restore zoom if newSituation is zooming out and we would already be zooming out farther
    if c.zoomValue <= restoreZoom + .5 and GetCameraZoom() < restoreZoom then
      return true, restoreZoom
    else
      -- print("Not restoring because saved value", restoreZoom, "is not greater than zoom OUT of situation.")
      return false
    end
  end

  -- if nothing else, don't restore
  return false
end






local function gotoView(view, instant)
  -- print("gotoView", view, instant)

  if not view then return end

  -- View change overrides all zooming and rotating.
  LibCamera:StopZooming()
  LibCamera:StopRotating()

  -- Whenever the zoom changes we need to reset the reactiveZoomTarget.
  DynamicCam:ResetReactiveZoomTarget()


  local cameraZoomBefore = GetCameraZoom()

  -- if you call SetView twice, then it's instant
  if instant then
    SetView(view)
  end
  SetView(view)

  local cameraZoomAfter = GetCameraZoom()
  -- print("Going from", cameraZoomBefore, "to", cameraZoomAfter)

  -- If "Adjust Shoulder offset according to zoom level" is activated,
  -- the shoulder offset will be instantaneously set according to the new
  -- camera zoom level. However, we should instead ease it for SET_VIEW_TRANSITION_TIME.
  if DynamicCam:GetSettingsValue(DynamicCam.currentSituationID, "shoulderOffsetZoomEnabled") and not DynamicCam.shoulderOffsetZoomTmpDisable then
    DynamicCam.easeShoulderOffsetInProgress = true
    DynamicCam.virtualCameraZoom = cameraZoomBefore

    LibEasing:Ease(
      function(newValue)
        DynamicCam.virtualCameraZoom = newValue
      end,
      cameraZoomBefore,
      cameraZoomAfter,
      SET_VIEW_TRANSITION_TIME,
      LibEasing.Linear,
      function()
        DynamicCam.easeShoulderOffsetInProgress = false
        DynamicCam.virtualCameraZoom = nil
      end
    )
  end
end







function DynamicCam:ChangeSituation(oldSituationID, newSituationID)

  -- print("ChangeSituation", oldSituationID, newSituationID, GetTime())

  LibCamera:StopZooming()


  -- When we are restoring or setting a view, we shall not apply any zoom.
  -- The variable "viewInstant" will define the transition speed below.
  local settingView = false
  local viewInstant

  -- Needed so often that we are setting these shortcuts for the whole function scope.
  local oldSituation
  local newSituation

  if oldSituationID then
    -- Store last zoom level of this situation.
    lastZoom[oldSituationID] = GetCameraZoom()
    -- print("---> Storing zoom", lastZoom[oldSituationID], oldSituationID)

    -- Shortcut variable.
    oldSituation = self.db.profile.situations[oldSituationID]
  end

  if newSituationID then
    -- Store the old situation as the new situation's last situation.
    -- May also be nil in case of coming from the no-situation state.
    -- (Needed for "adaptive restore", where we only restore when
    -- returning to the same situation we came from.)
    lastSituation[newSituationID] = oldSituationID

    -- Shortcut variable.
    newSituation = self.db.profile.situations[newSituationID]
  end


  -- If we are exiting another situation.
  if oldSituation then

    -- Stop rotating if applicable.
    StopRotation(oldSituation)

    -- Restore view if the new situation does not have a view itself.
    -- (Setting a new view has a higher priority than reseting an old one.)
    local old = oldSituation.viewZoom
    if old.enabled and old.viewZoomType == "view" and (not newSituation or not (newSituation.viewZoom.enabled and newSituation.viewZoom.viewZoomType == "view")) then

      if GetCVar("cameraSmoothStyle") == "0" then
        if old.viewRestore then
          gotoView(1, old.viewInstant)
          settingView = true
          viewInstant = old.viewInstant
        end

      -- Special treatment if camera follow is activated.
      else
        if old.restoreDefaultViewNumber then
          ResetView(old.restoreDefaultViewNumber)
          gotoView(old.restoreDefaultViewNumber, old.viewInstant)
          settingView = true
          viewInstant = old.viewInstant
        end
      end

    end

    -- Load and run advanced script onExit.
    self:RunScript(oldSituationID, "executeOnExit")

    -- Unhide UI if applicable.
    if oldSituation.hideUI.enabled then
      self:FadeInUI(oldSituation.hideUI.fadeInTime)
    end

    self:SendMessage("DC_SITUATION_EXITED")


  -- If we are coming from the no-situation state.
  elseif self.enteredSituationAtLogin then
    lastZoom["no-situation"] = GetCameraZoom()
    -- print("---> Storing default zoom", lastZoom[oldSituationID], oldSituationID)
  end


  -- If we are entering a new situation.
  if newSituation then

    -- Set view settings
    local new = newSituation.viewZoom
    if new.enabled and new.viewZoomType == "view" then
      if new.viewRestore then SaveView(1) end
      gotoView(new.viewNumber, new.viewInstant)
      settingView = true
      viewInstant = new.viewInstant
    end

    -- Load and run advanced script onEnter.
    self:RunScript(newSituationID, "executeOnEnter")

    -- Hide UI if applicable.
    if newSituation.hideUI.enabled then
      self:FadeOutUI(newSituation.hideUI.fadeOutTime, newSituation.hideUI)
    -- If we are currently exiting a situation, we have already called
    -- FadeInUI() above. Only if we are neither entering nor exiting a situation
    -- with UI fade, we show the UI, to be on the safe side.
    elseif not oldSituation or not oldSituation.hideUI.enabled then
      self:FadeInUI(0)
    end


  -- If we are entering the no-situation state.
  -- else
    -- print("Not entering a new situation")

  end



  -- These values are needed for the actual transition.
  local newZoomLevel
  local newShoulderOffset
  local transitionTime


  -- ##### Determine newZoomLevel. #####
  newZoomLevel = GetCameraZoom()

  -- We only need to determine newZoomLevel if we are zooming.
  if not settingView then

    -- Check if we should restore a stored zoom level.
    local shouldRestore, zoomLevel = ShouldRestoreZoom(oldSituationID, newSituationID)
    if shouldRestore then

      newZoomLevel = zoomLevel

    -- Otherwise take the zoom level of the situation we are entering.
    -- (There is no default zoom level for the no-situation case!)
    elseif newSituationID then

      local c = newSituation.viewZoom
      if c.enabled and c.viewZoomType == "zoom" then

        if (c.zoomType == "set") or
           (c.zoomType == "in"  and newZoomLevel > c.zoomValue) or
           (c.zoomType == "out" and newZoomLevel < c.zoomValue) then

            newZoomLevel = c.zoomValue

        elseif c.zoomType == "range" then

          if newZoomLevel < c.zoomMin then
            newZoomLevel = c.zoomMin
          elseif newZoomLevel > c.zoomMax then
            newZoomLevel = c.zoomMax
          end

        end

      end
    end
  end

  -- ##### Determine newShoulderOffset. #####
  if newSituation and newSituation.situationSettings.cvars.test_cameraOverShoulder then
    newShoulderOffset = newSituation.situationSettings.cvars.test_cameraOverShoulder
  else
    newShoulderOffset = self.db.profile.standardSettings.cvars.test_cameraOverShoulder
  end



  -- ##### Determine transitionTime. #####

  -- After reloading the UI we want to enter the current situation immediately!
  if not self.enteredSituationAtLogin then
    transitionTime = 0

  -- If there is a transitionTime in the environment, it has maximum priority.
  elseif newSituationID and situationEnvironments[newSituationID].this.transitionTime then
    transitionTime = situationEnvironments[newSituationID].this.transitionTime

  -- When restoring or setting a view, there is no additional zoom.
  -- The shoulder offset transition should be as fast at the view change.
  -- SET_VIEW_TRANSITION_TIME = 0.5 seems to be good for non-instant gotoView.
  elseif settingView then
    -- If settingView is true, we know there must be a newSituationID.
    if viewInstant then
      transitionTime = 0
    else
      transitionTime = SET_VIEW_TRANSITION_TIME
    end

  -- Otherwise the new situation's transition time is taken.
  elseif newSituation and newSituation.viewZoom.enabled and newSituation.viewZoom.viewZoomType == "zoom" then
    transitionTime = newSituation.viewZoom.zoomTransitionTime

    -- If the "Don't slow" option is selected, we have to check
    -- if actually a faster transition time is possible.
    if transitionTime > 0 and newSituation.viewZoom.zoomTimeIsMax then

      local difference = math.abs(newZoomLevel - GetCameraZoom())
      local linearSpeed = difference / transitionTime
      local currentSpeed = self:GetSettingsValue(newSituationID, "cvars", "cameraZoomSpeed")
      if linearSpeed < currentSpeed then
        -- min time 10 frames
        transitionTime = math.max(DynamicCam.secondsPerFrame*10, difference / currentSpeed)
      end
    end

  -- Default is this "magic number"...
  else
    transitionTime = 0.75
  end

  -- print("transitionTime", transitionTime)


  -- Start the actual easing.

  local easeFunction = LibEasing[self.db.profile.easingZoom]
  if settingView then
    easeFunction = LibEasing.Linear
  else
    -- We only need to zoom when not going into a view.
    -- Whenever the zoom changes we need to reset the reactiveZoomTarget.
    DynamicCam:ResetReactiveZoomTarget()
    LibCamera:SetZoom(newZoomLevel, transitionTime, easeFunction)
  end

  self:EaseShoulderOffset(newShoulderOffset, transitionTime, easeFunction)


  -- Set default values (possibly for new situation, may be nil).
  self.currentSituationID = newSituationID
  self:ApplySettings(true)

  -- Set situation specific values.
  -- (Except shoulder offset, which we are easing above.)
  if newSituation then

    -- If there is a rotationTime in the environment, it has priority.
    local rotationTime = situationEnvironments[newSituationID].this.rotationTime or newSituation.rotation.rotationTime

    -- Start rotating if applicable.
    StartRotation(newSituation, rotationTime)

    for cvar, value in pairs(newSituation.situationSettings.cvars) do
      if cvar ~= "test_cameraOverShoulder" then
        self:DC_SetCVar(cvar, value)
      end
    end

    self:SendMessage("DC_SITUATION_ENTERED")
  end

end




local delayTime

function DynamicCam:EvaluateSituations()

  -- print("EvaluateSituations", self.enteredSituationAtLogin, moreQuestDialog, GetTime())


  local highestPriority = -100
  local topSituation

  -- go through all situations pick the best one
  for id, situation in pairs(self.db.profile.situations) do

    if situation.enabled and not situation.errorEncountered then
      -- evaluate the condition, if it checks out and the priority is larger than any other, set it
      local lastEvaluate = self.conditionExecutionCache[id]
      local thisEvaluate = self:RunScript(id, "condition")
      self.conditionExecutionCache[id] = thisEvaluate

      if thisEvaluate then
        -- the condition is true
        if not lastEvaluate then
          -- last evaluate wasn't true, so this we "flipped"
          self:SendMessage("DC_SITUATION_ACTIVE", id)
        end

        -- check to see if we've already found something with higher priority
        if situation.priority > highestPriority then
          highestPriority = situation.priority
          topSituation = id
        end
      else
        -- the condition is false
        if lastEvaluate then
          -- last evaluate was true, so we "flipped"
          self:SendMessage("DC_SITUATION_INACTIVE", id)
        end
      end
    end
  end

  local swap = true
  if self.currentSituationID and (not topSituation or topSituation ~= self.currentSituationID) then
    -- we're in a situation that isn't the topSituation or there is no topSituation

    local delay = self.db.profile.situations[self.currentSituationID].delay
    if self.currentSituationID == "300" and moreQuestDialog and delay < waitForQuestFrameToReopen then
      -- print("got to wait for moreQuestDialog")
      self:CancelTimer(unsetMoreQuestDialogTimer)
      unsetMoreQuestDialogTimer = self:ScheduleTimer(function() moreQuestDialog = false end, waitForQuestFrameToReopen)
      delay = waitForQuestFrameToReopen
    end

    if delay > 0 then
      if not delayTime then
        -- not yet cooling down, make sure to guarentee an evaluate, don't swap
        -- print(delayTime, GetTime(), "Not changing situation because of a delay")
        delayTime = GetTime() + delay
        self:ScheduleTimer("EvaluateSituations", delay)
        swap = false
      -- Need to round, otherwise same times are sometimes not recognised as such.
      elseif Round(delayTime, 3) > Round(GetTime(), 3) then
        -- print(delayTime, GetTime(), "still cooling down, don't swap")
        swap = false
      end
    end
  end

  if swap then
    if topSituation then
      if topSituation ~= self.currentSituationID then
        -- we want to swap and there is a situation to swap into, and it's not the current situation
        self:ChangeSituation(self.currentSituationID, topSituation)
      end

      -- if we had a delay previously, make sure to reset it
      delayTime = nil
    else
      --none of the situations are active, leave the current situation
      if self.currentSituationID then
        self:ChangeSituation(self.currentSituationID, nil)
      end
    end
  end


  self.enteredSituationAtLogin = true

  -- print("Finished EvaluateSituations", self.enteredSituationAtLogin, GetTime())
end





-- Storing which mounts are flying mounts, because the game does not provide a direct reliable way to determine this.
-- See: https://www.wowinterface.com/forums/showthread.php?p=344234#post344234
DynamicCam.FlyingMountList = {}

local maintainFlyingMountListFrame = CreateFrame ("Frame")
maintainFlyingMountListFrame:RegisterEvent("PLAYER_ENTERING_WORLD")
maintainFlyingMountListFrame:SetScript("OnEvent", function(_, event, isLogin, isReload)
  if not isLogin and not isReload then return end

  if WOW_PROJECT_ID ~= WOW_PROJECT_MAINLINE then return end

  -- Store current mount journal filter settings for later restoring.

  local collectedFilters = {}
  collectedFilters[LE_MOUNT_JOURNAL_FILTER_COLLECTED] = C_MountJournal.GetCollectedFilterSetting(LE_MOUNT_JOURNAL_FILTER_COLLECTED)
  collectedFilters[LE_MOUNT_JOURNAL_FILTER_NOT_COLLECTED] = C_MountJournal.GetCollectedFilterSetting(LE_MOUNT_JOURNAL_FILTER_NOT_COLLECTED)
  collectedFilters[LE_MOUNT_JOURNAL_FILTER_UNUSABLE] = C_MountJournal.GetCollectedFilterSetting(LE_MOUNT_JOURNAL_FILTER_UNUSABLE)
  -- DynamicCam:PrintTable(collectedFilters, 0)

  local typeFilters = {}
  for filterIndex = 1, Enum.MountTypeMeta.NumValues do
    typeFilters[filterIndex] = C_MountJournal.IsTypeChecked(filterIndex)
  end
  -- DynamicCam:PrintTable(typeFilters, 0)

  local sourceFilters = {}
  for filterIndex = 1, C_PetJournal.GetNumPetSources() do
    if C_MountJournal.IsValidSourceFilter(filterIndex) then
      sourceFilters[filterIndex] = C_MountJournal.IsSourceChecked(filterIndex)
    end
  end
  -- DynamicCam:PrintTable(sourceFilters, 0)


  -- Set filters to flying mounts.
  C_MountJournal.SetDefaultFilters()
  C_MountJournal.SetCollectedFilterSetting(LE_MOUNT_JOURNAL_FILTER_UNUSABLE, true)  -- Include unusable.
  C_MountJournal.SetTypeFilter(1, false)   -- No Ground.
  C_MountJournal.SetTypeFilter(3, false)   -- No Aquatic.


  -- Fill list of flying mount IDs.
  DynamicCam.FlyingMountList = {}
  for displayIndex = 1, C_MountJournal.GetNumDisplayedMounts() do
    local mountId = select(12, C_MountJournal.GetDisplayedMountInfo(displayIndex))
    -- print(displayIndex, mountId)
    DynamicCam.FlyingMountList[mountId] = true
  end


  -- Restore the mount journal filter settings.

  C_MountJournal.SetCollectedFilterSetting(LE_MOUNT_JOURNAL_FILTER_COLLECTED, collectedFilters[LE_MOUNT_JOURNAL_FILTER_COLLECTED])
  C_MountJournal.SetCollectedFilterSetting(LE_MOUNT_JOURNAL_FILTER_NOT_COLLECTED, collectedFilters[LE_MOUNT_JOURNAL_FILTER_NOT_COLLECTED])
  C_MountJournal.SetCollectedFilterSetting(LE_MOUNT_JOURNAL_FILTER_UNUSABLE, collectedFilters[LE_MOUNT_JOURNAL_FILTER_UNUSABLE])

  for filterIndex = 1, Enum.MountTypeMeta.NumValues do
    C_MountJournal.SetTypeFilter(filterIndex, typeFilters[filterIndex])
  end

  for filterIndex = 1, C_PetJournal.GetNumPetSources() do
    if C_MountJournal.IsValidSourceFilter(filterIndex) then
      C_MountJournal.SetSourceFilter(filterIndex, sourceFilters[filterIndex])
    end
  end

end)


-- Some functions we need in several situation conditions.
-- So we only implement them once.

DynamicCam.lastActiveMount = nil


function DynamicCam:GetCurrentMount()
  -- In situation conditions we should always check IsMounted() before GetCurrentMount().
  -- But just to be on the safe side, check again here.
  if not IsMounted() then return nil end

  -- Check last active mount first to save time.
  if self.lastActiveMount then
    local _, _, _, active = C_MountJournal.GetMountInfoByID(self.lastActiveMount)
    if active then
      return self.lastActiveMount
    end
  end

  -- Must be a new new mount, so go through all to find active one.
  for _, v in pairs(C_MountJournal.GetMountIDs()) do
    local _, _, _, active = C_MountJournal.GetMountInfoByID(v)
    if active then
      self.lastActiveMount = v
      return v
    end
  end

  -- Should never happen, as we have checked IsMounted() above.
  return nil
end



function DynamicCam:CurrentMountCanFly()

  -- IsMounted() is checked at the beginning of GetCurrentMount().
  local currentlyActiveMount = self:GetCurrentMount()
  if currentlyActiveMount then

    if self.FlyingMountList[currentlyActiveMount] then
      -- print("I believe mount", currentlyActiveMount, "can fly")
      return true
    else
      -- print("I believe mount", currentlyActiveMount, "cannot fly")
      return false
    end
  end

  return false
end


function DynamicCam:SkyridingOn()
  -- local seconds = GetTimePreciseSec()
  -- local milliseconds = debugprofilestop()

  local checkedActiveMount = false
  if self.lastActiveMount then
    local _, _, _, isActive, _, _, _, _, _, _, _, _, isSteadyFlight = C_MountJournal.GetMountInfoByID(self.lastActiveMount)
    if isActive then
      checkedActiveMount = true
      if isSteadyFlight then return false end
    end
  end

  if not checkedActiveMount then
    for _, v in pairs (C_MountJournal.GetMountIDs()) do
      local _, _, _, isActive, _, _, _, _, _, _, _, _, isSteadyFlight = C_MountJournal.GetMountInfoByID(v)
      if isActive then
        self.lastActiveMount = v
        if isSteadyFlight then return false end
        break
      end
    end
  end

  -- print(GetTimePreciseSec() - seconds)
  -- print("1", debugprofilestop() - milliseconds)

  if C_UnitAuras.GetPlayerAuraBySpellID(404464) ~= nil then return true end
  if C_UnitAuras.GetPlayerAuraBySpellID(404468) ~= nil then return false end

  -- print("2", debugprofilestop() - milliseconds)

  -- If you have never switched, you have neither buff and Skyriding it the default.
  return true
end







function DynamicCam:CopySituationInto(fromID, toID)

  -- TODO

  -- -- make sure that both from and to are valid situationIDs
  -- if not fromID or not toID or fromID == toID or not self.db.profile.situations[fromID] or not self.db.profile.situations[toID] then
    -- -- print("CopySituationInto has invalid from or to!")
    -- return
  -- end

  -- local from = self.db.profile.situations[fromID]
  -- local to = self.db.profile.situations[toID]

  -- -- copy settings over
  -- to.enabled = from.enabled

  -- -- a more robust solution would be much better!
  -- to.cameraActions = {}
  -- for key, value in pairs(from.cameraActions) do
    -- to.cameraActions[key] = from.cameraActions[key]
  -- end

  -- to.view = {}
  -- for key, value in pairs(from.view) do
    -- to.view[key] = from.view[key]
  -- end

  -- to.extras = {}
  -- for key, value in pairs(from.extras) do
    -- to.extras[key] = from.extras[key]
  -- end

  -- to.situationSettings.cvars = {}
  -- for key, value in pairs(from.situationSettings.cvars) do
    -- to.situationSettings.cvars[key] = from.situationSettings.cvars[key]
  -- end

  -- self:UpdateSituation(toID)
end




function DynamicCam:UpdateSituation(situationID)
  local situation = DynamicCam.db.profile.situations[situationID]

  -- Give this situation a new chance!
  situation.errorEncountered = nil
  situation.errorMessage = nil

  if situation and situationID == DynamicCam.currentSituationID then
    DynamicCam:ApplySettings()
  end

  DynamicCam:RunScript(situationID, "executeOnInit")
  DynamicCam:RegisterSituationEvents(situationID)

  DynamicCam:EvaluateSituations()
end




local function copyTable(originalTable)
  local origType = type(originalTable)
  local copy
  if origType == "table" then
    -- this child is a table, copy the table recursively
    copy = {}
    for orig_key, orig_value in next, originalTable, nil do
      copy[copyTable(orig_key)] = copyTable(orig_value)
    end
  else
    -- this child is a value, copy it cover
    copy = originalTable
  end
  return copy
end

function DynamicCam:CreateCustomSituation(name)
  -- search for a clear id
  local highest = 0

  -- go through each and every situation, look for the custom ones, and find the
  -- highest custom id
  for id, situation in pairs(self.db.profile.situations) do
    local i, j = string.find(id, "custom")

    if i and j then
      local num = tonumber(string.sub(id, j+1))

      if num and num > highest then
        highest = num
      end
    end
  end

  -- copy the default situation into a new table
  local newSituationID = "custom"..(highest+1)
  local newSituation = copyTable(self.situationDefaults)

  newSituation.name = name

  -- create the entry in the profile with an id 1 higher than the highest already customID
  self.db.profile.situations[newSituationID] = newSituation

  -- make sure that the options panel reselects a situation
  if self.Options then
    self.Options:SelectSituation(newSituationID)
  end

  self:UpdateSituation(newSituationID)
  return newSituation, newSituationID
end

function DynamicCam:DeleteCustomSituation(situationID)
  if not self.db.profile.situations[situationID] then
    -- print("Cannot delete this situation since it doesn't exist", situationID)
  end

  if not string.find(situationID, "custom") then
    -- print("Cannot delete a non-custom situation")
  end

  -- if we're currently in this situation, exit it
  if self.currentSituationID == situationID then
    self:ChangeSituation(situationID, nil)
  end

  -- delete the situation
  self.db.profile.situations[situationID] = nil

  -- make sure that the options panel reselects a situation
  if self.Options then
    self.Options:ClearSelection()
    self.Options:SelectSituation()
  end

  -- EvaluateSituations because we might have changed the current situation
  self:EvaluateSituations()
end