Build firmware not working.

[espruino-discuss3]

Posted at 2020-03-01 by Jonaswinz

After I runned this (official) code:

# Get the Espruino source code
git clone https://github.com/espruino/Espruino.git
cd Espruino
# Download and set up the toolchain ('source' is important here)
source scripts/provision.sh ESP32
# Clean and rebuild
make clean && BOARD=ESP32 make

no espruino_esp32.bin was created.
The terminal last output is:

cc1: warning: unrecognized command line option '-Wno-expansion-to-defined'
make: *** wait: No child processes. Stop.

Jonas

[espruino-discuss3]

Posted at 2020-03-01 by @gfwilliams

Please can you git pull and try again? I found a few build issues that I'm surprised haven't surfaced before, but it seems good now: https://travis-ci.org/espruino/Espruino

---

Posted at 2020-03-01 by Jonaswinz

Ok thanks. The building worked. But after I flashed the firmware to the esp32 this message shows while booting:

ets Jun 8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:2668
load:0x40078000,len:7304
load:0x40080000,len:5312
entry 0x40080274
E (530) esp_image: Image length 1395696 doesn't fit in partition length 1376256
E (530) boot: Factory app partition is not bootable
E (530) esp_image: image at 0x160000 has invalid magic byte
E (536) boot: OTA app partition slot 0 is not bootable
E (541) boot: No bootable app partitions in the partition table
Fatal exception (0): IllegalInstruction
epc1=0x400802ba, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x0

---

Posted at 2020-03-02 by @MaBecker

there are some changes needed to make this work again

espruino/Espruino#1751 (comment)

---

Posted at 2020-03-02 by @MaBecker

maybe this helps too

https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/partition-tables.html

---

Posted at 2020-03-13 by @MaBecker

it is fixed