Remove zigbee custom_sdkonfig and beautify entrys

Author: Jason2866

examples/arduino-blink/platformio.ini

@@ -8,19 +8,17 @@
 ; http://docs.platformio.org/page/projectconf.html
 
 [env:esp32solo1]
-platform = espressif32
-framework = arduino
-board = esp32-solo1
-build_flags = -DLED_BUILTIN=2
-lib_ignore = wifi
-             ble
-             spiffs
-             NetworkClientSecure
-             Matter
-             Zigbee
-             ESP RainMaker
-custom_sdkconfig =
-                          '# CONFIG_ZB_ENABLED is not set'
+platform                = espressif32
+framework               = arduino
+board                   = esp32-solo1
+build_flags             = -DLED_BUILTIN=2
+lib_ignore              = wifi
+                          ble
+                          spiffs
+                          NetworkClientSecure
+                          Matter
+                          Zigbee
+                          ESP RainMaker
 custom_component_remove = espressif/esp_hosted
                           espressif/esp_wifi_remote
                           espressif/network_provisioning
@@ -40,19 +38,17 @@ custom_component_remove = espressif/esp_hosted
                           chmorgan/esp-libhelix-mp3
 
 [env:esp32-c2-devkitm-1]
-platform = espressif32
-framework = arduino
-board = esp32-c2-devkitm-1
-monitor_speed = 115200
-lib_ignore = wifi
-             ble
-             spiffs
-             NetworkClientSecure
-             Matter
-             Zigbee
-             ESP RainMaker
-custom_sdkconfig =
-                          '# CONFIG_ZB_ENABLED is not set'
+platform                = espressif32
+framework               = arduino
+board                   = esp32-c2-devkitm-1
+monitor_speed           = 115200
+lib_ignore              = wifi
+                          ble
+                          spiffs
+                          NetworkClientSecure
+                          Matter
+                          Zigbee
+                          ESP RainMaker
 custom_component_remove = espressif/esp_hosted
                           espressif/esp_wifi_remote
                           espressif/network_provisioning
@@ -70,20 +66,20 @@ custom_component_remove = espressif/esp_hosted
                           espressif/esp_rainmaker
                           espressif/rmaker_common
                           chmorgan/esp-libhelix-mp3
-custom_component_add =    espressif/cmake_utilities @ 0.*
+custom_component_add    = espressif/cmake_utilities @ 0.*
 
 [env:esp32-s3-arduino_nano_esp32]
-platform = espressif32
-framework = arduino
-board = arduino_nano_esp32
-monitor_speed = 115200
-lib_ignore = wifi
-             ble
-             spiffs
-             NetworkClientSecure
-             Matter
-             Zigbee
-             ESP RainMaker
+platform                = espressif32
+framework               = arduino
+board                   = arduino_nano_esp32
+monitor_speed           = 115200
+lib_ignore              = wifi
+                          ble
+                          spiffs
+                          NetworkClientSecure
+                          Matter
+                          Zigbee
+                          ESP RainMaker
 custom_component_remove = espressif/esp_hosted
                           espressif/esp_wifi_remote
                           espressif/network_provisioning
@@ -104,29 +100,28 @@ custom_component_remove = espressif/esp_hosted
 
 [env:esp32s3-qio_opi_per]
 ; OPI Performance settings -> Display use
-platform = espressif32
-framework = arduino
-board = esp32s3_120_16_8-qio_opi
-lib_ignore = wifi
-             ble
-             spiffs
-             NetworkClientSecure
-             Matter
-             Zigbee
-             ESP RainMaker
-custom_sdkconfig            = CONFIG_SPIRAM_MODE_OCT=y
-                              CONFIG_SPIRAM_SPEED_120M=y
-                              CONFIG_LCD_RGB_ISR_IRAM_SAFE=y
-                              CONFIG_GDMA_CTRL_FUNC_IN_IRAM=y
-                              CONFIG_I2S_ISR_IRAM_SAFE=y
-                              CONFIG_GDMA_ISR_IRAM_SAFE=y
-                              CONFIG_SPIRAM_XIP_FROM_PSRAM=y
-                              CONFIG_SPIRAM_FETCH_INSTRUCTIONS=y
-                              CONFIG_SPIRAM_RODATA=y
-                              CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240=y
-                              CONFIG_ESP32S3_DATA_CACHE_64KB=y
-                              CONFIG_ESP32S3_DATA_CACHE_LINE_64B=y
-                              '# CONFIG_ZB_ENABLED is not set'
+platform                = espressif32
+framework               = arduino
+board                   = esp32s3_120_16_8-qio_opi
+lib_ignore              = wifi
+                          ble
+                          spiffs
+                          NetworkClientSecure
+                          Matter
+                          Zigbee
+                          ESP RainMaker
+custom_sdkconfig        = CONFIG_SPIRAM_MODE_OCT=y
+                          CONFIG_SPIRAM_SPEED_120M=y
+                          CONFIG_LCD_RGB_ISR_IRAM_SAFE=y
+                          CONFIG_GDMA_CTRL_FUNC_IN_IRAM=y
+                          CONFIG_I2S_ISR_IRAM_SAFE=y
+                          CONFIG_GDMA_ISR_IRAM_SAFE=y
+                          CONFIG_SPIRAM_XIP_FROM_PSRAM=y
+                          CONFIG_SPIRAM_FETCH_INSTRUCTIONS=y
+                          CONFIG_SPIRAM_RODATA=y
+                          CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240=y
+                          CONFIG_ESP32S3_DATA_CACHE_64KB=y
+                          CONFIG_ESP32S3_DATA_CACHE_LINE_64B=y
 custom_component_remove = espressif/esp_hosted
                           espressif/esp_wifi_remote
                           espressif/network_provisioning
@@ -146,18 +141,18 @@ custom_component_remove = espressif/esp_hosted
                           chmorgan/esp-libhelix-mp3
 
 [env:esp32-c6-devkitc-1]
-platform = espressif32
-framework = arduino
-build_type = debug
-board = esp32-c6-devkitc-1
-monitor_speed = 115200
-lib_ignore = wifi
-             ble
-             spiffs
-             NetworkClientSecure
-             Matter
-             Zigbee
-             ESP RainMaker
+platform                = espressif32
+framework               = arduino
+build_type              = debug
+board                   = esp32-c6-devkitc-1
+monitor_speed           = 115200
+lib_ignore              = wifi
+                          ble
+                          spiffs
+                          NetworkClientSecure
+                          Matter
+                          Zigbee
+                          ESP RainMaker
 custom_component_remove = espressif/esp_hosted
                           espressif/esp_wifi_remote
                           espressif/network_provisioning
@@ -177,16 +172,16 @@ custom_component_remove = espressif/esp_hosted
                           chmorgan/esp-libhelix-mp3
 
 [env:esp32-h2-devkitm-1]
-platform = espressif32
-framework = arduino
-board = esp32-h2-devkitm-1
-monitor_speed = 115200
-lib_ignore = ble
-             spiffs
-             NetworkClientSecure
-             Matter
-             Zigbee
-             ESP RainMaker
+platform                = espressif32
+framework               = arduino
+board                   = esp32-h2-devkitm-1
+monitor_speed           = 115200
+lib_ignore              = ble
+                          spiffs
+                          NetworkClientSecure
+                          Matter
+                          Zigbee
+                          ESP RainMaker
 custom_component_remove = espressif/esp_hosted
                           espressif/esp_wifi_remote
                           espressif/network_provisioning
@@ -206,18 +201,17 @@ custom_component_remove = espressif/esp_hosted
                           chmorgan/esp-libhelix-mp3
 
 [env:esp32-p4]
-platform = espressif32
-framework = arduino
-board = esp32-p4
-build_flags = -DLED_BUILTIN=2
-lib_ignore = wifi
-             ble
-             spiffs
-             NetworkClientSecure
-             Matter
-             Zigbee
-             ESP RainMaker
-monitor_speed = 115200
+platform                = espressif32
+framework               = arduino
+board                   = esp32-p4
+build_flags             = -DLED_BUILTIN=2
+lib_ignore              = wifi
+                          ble
+                          spiffs
+                          NetworkClientSecure
+                          Matter
+                          Zigbee
+                          ESP RainMaker
 custom_component_remove = espressif/esp_hosted
                           espressif/esp_wifi_remote
                           espressif/network_provisioning