diff --git a/CI/update/patch/CMSIS/WL3/0001-feat-wl3-add-__libc_init_array-call-to-startup.patch b/CI/update/patch/CMSIS/WL3/0001-feat-wl3-add-__libc_init_array-call-to-startup.patch new file mode 100644 index 0000000000..3323401377 --- /dev/null +++ b/CI/update/patch/CMSIS/WL3/0001-feat-wl3-add-__libc_init_array-call-to-startup.patch @@ -0,0 +1,26 @@ +From d4316ffbdd8fb8eb5863d9198422b832aafd44c6 Mon Sep 17 00:00:00 2001 +From: Frederic Pillon +Date: Tue, 23 Sep 2025 09:50:23 +0200 +Subject: [PATCH 1/1] feat(wl3): add __libc_init_array call to startup + +Signed-off-by: Frederic Pillon +--- + .../ST/STM32WL3x/Source/Templates/gcc/startup_stm32wl3xx.s | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/startup_stm32wl3xx.s b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/startup_stm32wl3xx.s +index 68b8c7ab4..28bf2e6da 100644 +--- a/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/startup_stm32wl3xx.s ++++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/startup_stm32wl3xx.s +@@ -83,6 +83,8 @@ LoopFillZerobss: + cmp r2, r3 + bcc FillZerobss + ++/* Call static constructors */ ++ bl __libc_init_array + /* Call the application's entry point.*/ + bl main + +-- +2.34.1 + diff --git a/CI/update/patch/HAL/WL3/0001-fix-wl3-HAL-and-LL-warnings.patch b/CI/update/patch/HAL/WL3/0001-fix-wl3-HAL-and-LL-warnings.patch new file mode 100644 index 0000000000..9c4c0d7601 --- /dev/null +++ b/CI/update/patch/HAL/WL3/0001-fix-wl3-HAL-and-LL-warnings.patch @@ -0,0 +1,877 @@ +From 6d24d07674b242544e2f24a26dd9785efb178650 Mon Sep 17 00:00:00 2001 +From: Frederic Pillon +Date: Tue, 23 Sep 2025 14:48:50 +0200 +Subject: [PATCH 1/1] fix(wl3): HAL and LL warnings + +Signed-off-by: Frederic Pillon +--- + .../Inc/stm32wl3x_ll_dma.h | 104 ++++++++++++++++++ + .../Src/stm32wl3x_hal_flash_ex.c | 2 +- + .../Src/stm32wl3x_ll_adc.c | 2 +- + 3 files changed, 106 insertions(+), 2 deletions(-) + +diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dma.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dma.h +index b94790b32..e49d7c53f 100644 +--- a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dma.h ++++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dma.h +@@ -433,6 +433,7 @@ typedef struct + */ + __STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + SET_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_EN); + } + +@@ -453,6 +454,7 @@ __STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) + */ + __STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + CLEAR_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_EN); + } + +@@ -473,6 +475,7 @@ __STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) + */ + __STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return ((READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL); + } +@@ -509,6 +512,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Cha + */ + __STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) + { ++ (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, + Configuration); +@@ -536,6 +540,7 @@ __STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, + */ + __STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) + { ++ (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); + } +@@ -561,6 +566,7 @@ __STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t + */ + __STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); + } +@@ -587,6 +593,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint + */ + __STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) + { ++ (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_CIRC, + Mode); + } +@@ -610,6 +617,7 @@ __STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_ + */ + __STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_CIRC)); + } +@@ -634,6 +642,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) + */ + __STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) + { ++ (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_PINC, + PeriphOrM2MSrcIncMode); + } +@@ -657,6 +666,7 @@ __STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel + */ + __STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_PINC)); + } +@@ -681,6 +691,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Cha + */ + __STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) + { ++ (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_MINC, + MemoryOrM2MDstIncMode); + } +@@ -704,6 +715,7 @@ __STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel + */ + __STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_MINC)); + } +@@ -729,6 +741,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Cha + */ + __STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) + { ++ (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_PSIZE, + PeriphOrM2MSrcDataSize); + } +@@ -753,6 +766,7 @@ __STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, u + */ + __STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_PSIZE)); + } +@@ -778,6 +792,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channe + */ + __STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) + { ++ (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_MSIZE, + MemoryOrM2MDstDataSize); + } +@@ -802,6 +817,7 @@ __STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, u + */ + __STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_MSIZE)); + } +@@ -828,6 +844,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channe + */ + __STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) + { ++ (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_PL, + Priority); + } +@@ -853,6 +870,7 @@ __STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t + */ + __STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_PL)); + } +@@ -877,6 +895,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint3 + */ + __STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) + { ++ (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CNDTR, + DMA_CNDTR_NDT, NbData); + } +@@ -900,6 +919,7 @@ __STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, u + */ + __STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CNDTR, + DMA_CNDTR_NDT)); + } +@@ -931,6 +951,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channe + __STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, + uint32_t DstAddress, uint32_t Direction) + { ++ (void)DMAx; + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { +@@ -965,6 +986,7 @@ __STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, + */ + __STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) + { ++ (void)DMAx; + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CMAR, MemoryAddress); + } + +@@ -988,6 +1010,7 @@ __STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel + */ + __STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) + { ++ (void)DMAx; + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CPAR, PeriphAddress); + } + +@@ -1009,6 +1032,7 @@ __STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel + */ + __STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CMAR)); + } + +@@ -1030,6 +1054,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Cha + */ + __STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CPAR)); + } + +@@ -1053,6 +1078,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Cha + */ + __STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) + { ++ (void)DMAx; + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CPAR, MemoryAddress); + } + +@@ -1076,6 +1102,7 @@ __STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel + */ + __STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) + { ++ (void)DMAx; + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CMAR, MemoryAddress); + } + +@@ -1097,6 +1124,7 @@ __STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel + */ + __STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CPAR)); + } + +@@ -1118,6 +1146,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Cha + */ + __STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CMAR)); + } + +@@ -1140,6 +1169,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Cha + */ + __STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Request) + { ++ (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_DMAMUX_CCR(DMAx, Channel - 1U)->CxCR, DMAMUX_CxCR_DMAREQ_ID, Request); + } + +@@ -1161,6 +1191,7 @@ __STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel + */ + __STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_DMAMUX_CCR(DMAx, Channel - 1U)->CxCR, DMAMUX_CxCR_DMAREQ_ID)); + } + +@@ -1180,6 +1211,7 @@ __STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Cha + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)) ? 1UL : 0UL); + } + +@@ -1191,6 +1223,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)) ? 1UL : 0UL); + } + +@@ -1202,6 +1235,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)) ? 1UL : 0UL); + } + +@@ -1213,6 +1247,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)) ? 1UL : 0UL); + } + +@@ -1224,6 +1259,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)) ? 1UL : 0UL); + } + +@@ -1235,6 +1271,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)) ? 1UL : 0UL); + } + +@@ -1246,6 +1283,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)) ? 1UL : 0UL); + } + +@@ -1257,6 +1295,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI8(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF8) == (DMA_ISR_GIF8)) ? 1UL : 0UL); + } + +@@ -1268,6 +1307,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI8(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)) ? 1UL : 0UL); + } + +@@ -1279,6 +1319,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)) ? 1UL : 0UL); + } + +@@ -1290,6 +1331,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)) ? 1UL : 0UL); + } + +@@ -1301,6 +1343,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)) ? 1UL : 0UL); + } + +@@ -1312,6 +1355,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)) ? 1UL : 0UL); + } + +@@ -1323,6 +1367,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)) ? 1UL : 0UL); + } + +@@ -1334,6 +1379,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)) ? 1UL : 0UL); + } + +@@ -1345,6 +1391,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC8(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF8) == (DMA_ISR_TCIF8)) ? 1UL : 0UL); + } + +@@ -1356,6 +1403,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC8(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)) ? 1UL : 0UL); + } + +@@ -1367,6 +1415,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)) ? 1UL : 0UL); + } + +@@ -1378,6 +1427,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)) ? 1UL : 0UL); + } + +@@ -1389,6 +1439,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)) ? 1UL : 0UL); + } + +@@ -1400,6 +1451,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)) ? 1UL : 0UL); + } + +@@ -1411,6 +1463,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)) ? 1UL : 0UL); + } + +@@ -1422,6 +1475,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)) ? 1UL : 0UL); + } + +@@ -1433,6 +1487,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT8(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF8) == (DMA_ISR_HTIF8)) ? 1UL : 0UL); + } + +@@ -1444,6 +1499,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT8(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)) ? 1UL : 0UL); + } + +@@ -1455,6 +1511,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)) ? 1UL : 0UL); + } + +@@ -1466,6 +1523,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)) ? 1UL : 0UL); + } + +@@ -1477,6 +1535,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)) ? 1UL : 0UL); + } + +@@ -1488,6 +1547,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)) ? 1UL : 0UL); + } + +@@ -1499,6 +1559,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)) ? 1UL : 0UL); + } + +@@ -1510,6 +1571,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)) ? 1UL : 0UL); + } + +@@ -1521,6 +1583,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE8(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF8) == (DMA_ISR_TEIF8)) ? 1UL : 0UL); + } + +@@ -1532,6 +1595,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE8(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1); + } + +@@ -1543,6 +1607,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2); + } + +@@ -1554,6 +1619,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3); + } + +@@ -1565,6 +1631,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4); + } + +@@ -1576,6 +1643,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5); + } + +@@ -1587,6 +1655,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6); + } + +@@ -1598,6 +1667,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7); + } + +@@ -1609,6 +1679,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_GI8(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF8); + } + +@@ -1620,6 +1691,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_GI8(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1); + } + +@@ -1631,6 +1703,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2); + } + +@@ -1642,6 +1715,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3); + } + +@@ -1653,6 +1727,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4); + } + +@@ -1664,6 +1739,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5); + } + +@@ -1675,6 +1751,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6); + } + +@@ -1686,6 +1763,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7); + } + +@@ -1697,6 +1775,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TC8(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF8); + } + +@@ -1708,6 +1787,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TC8(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1); + } + +@@ -1719,6 +1799,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2); + } + +@@ -1730,6 +1811,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3); + } + +@@ -1741,6 +1823,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4); + } + +@@ -1752,6 +1835,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5); + } + +@@ -1763,6 +1847,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6); + } + +@@ -1774,6 +1859,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7); + } + +@@ -1785,6 +1871,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_HT8(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF8); + } + +@@ -1796,6 +1883,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_HT8(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1); + } + +@@ -1807,6 +1895,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2); + } + +@@ -1818,6 +1907,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3); + } + +@@ -1829,6 +1919,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4); + } + +@@ -1840,6 +1931,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5); + } + +@@ -1851,6 +1943,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6); + } + +@@ -1862,6 +1955,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7); + } + +@@ -1873,6 +1967,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_ClearFlag_TE8(DMA_TypeDef *DMAx) + { ++ (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF8); + } + +@@ -1900,6 +1995,7 @@ __STATIC_INLINE void LL_DMA_ClearFlag_TE8(DMA_TypeDef *DMAx) + */ + __STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + SET_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_TCIE); + } + +@@ -1920,6 +2016,7 @@ __STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) + */ + __STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + SET_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_HTIE); + } + +@@ -1940,6 +2037,7 @@ __STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) + */ + __STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + SET_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_TEIE); + } + +@@ -1960,6 +2058,7 @@ __STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) + */ + __STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + CLEAR_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_TCIE); + } + +@@ -1980,6 +2079,7 @@ __STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) + */ + __STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + CLEAR_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_HTIE); + } + +@@ -2000,6 +2100,7 @@ __STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) + */ + __STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + CLEAR_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_TEIE); + } + +@@ -2020,6 +2121,7 @@ __STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) + */ + __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return ((READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL); + } +@@ -2041,6 +2143,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Chann + */ + __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return ((READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL); + } +@@ -2062,6 +2165,7 @@ __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Chann + */ + __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) + { ++ (void)DMAx; + return ((READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL); + } +diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_flash_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_flash_ex.c +index 9cd95caf3..d1b9f3dd0 100644 +--- a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_flash_ex.c ++++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_flash_ex.c +@@ -107,7 +107,7 @@ static void FLASH_Program_OTPWord(uint32_t Address, uint32_t Data); + */ + HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) + { +- HAL_StatusTypeDef status; ++ HAL_StatusTypeDef status = HAL_ERROR; + uint32_t index; + + /* Check the parameters */ +diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_adc.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_adc.c +index 5455a5343..4a88375ed 100644 +--- a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_adc.c ++++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_adc.c +@@ -24,7 +24,7 @@ + #ifdef USE_FULL_ASSERT + #include "stm32_assert.h" + #else +-#define assert_param(expr) ((void)0UL) ++#define assert_param(expr) ((void)0U) + #endif /* USE_FULL_ASSERT */ + + /** @addtogroup STM32WL3x_LL_Driver +-- +2.34.1 + diff --git a/CI/update/stm32variant.py b/CI/update/stm32variant.py index eb2a08f337..a7d7a5918f 100644 --- a/CI/update/stm32variant.py +++ b/CI/update/stm32variant.py @@ -707,8 +707,8 @@ def dac_pinmap(): def i2c_pinmap(lst): i2c_pins_list = [] - winst = [] - wpin = [] + winst = [0] + wpin = [0] mode = "STM_MODE_AF_OD" if lst == i2csda_list: aname = "I2C_SDA" @@ -1651,7 +1651,7 @@ def search_product_line(valueline: str, extra: str) -> str: for idx_pline, pline in enumerate(product_line_list): vline = valueline product_line = pline - if vline.startswith("STM32WB0"): + if vline.startswith("STM32WB0") or vline.startswith("STM32WL3"): pline = pline + "xx" # Remove the 'x' character from pline and # the one at same index in the vline @@ -2204,15 +2204,19 @@ def group_by_flash(group_base_list, glist, index_mcu_base): ext_list = [] for ppe in key_package_list: sub = mcu_PE_regex.search(ppe) - package_list.append(sub.group(1)) - # Assert - if sub.group(2) != "x": - print( - f"Package of {base_name}, ppe {ppe} info contains {sub.group(2)} instead of 'x'" - ) + if not sub: + print(f"Package of {base_name}, ppe {ppe} info not recognized") exit(1) - if sub.group(3): - ext_list.append(sub.group(3)) + else: + package_list.append(sub.group(1)) + # Assert + if sub.group(2) != "x": + print( + f"Package of {base_name}, ppe {ppe} info contains {sub.group(2)} instead of 'x'" + ) + exit(1) + if sub.group(3): + ext_list.append(sub.group(3)) # Count each subpart pcounter = Counter(package_list) ecounter = Counter(ext_list) @@ -2245,9 +2249,10 @@ def merge_dir(out_temp_path, group_mcu_dir, mcu_family, periph_xml, variant_exp) # Merge if needed if len(group_mcu_dir) != 1: # Handle mcu name length dynamically - # Add 3 for extra information line, #pin and flash - index_mcu_base = len(mcu_family.name.removeprefix("STM32").removesuffix(nx)) + 3 - + # Add num for extra information line, #pin and flash + index_mcu_base = len(mcu_family.name.removeprefix("STM32").removesuffix(nx)) + ( + 3 if len(nx) == 2 else 2 + ) # Extract only dir name for dir_name in group_mcu_dir: dirname_list.append(dir_name.stem) diff --git a/README.md b/README.md index 034c7894a2..aa505b6f35 100644 --- a/README.md +++ b/README.md @@ -78,6 +78,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d - [Generic STM32WB boards](#generic-stm32wb-boards) - [Generic STM32WB0 boards](#generic-stm32wb0-boards) - [Generic STM32WBA boards](#generic-stm32wba-boards) + - [Generic STM32WL3 boards](#generic-stm32wl3-boards) - [Generic STM32WL boards](#generic-stm32wl-boards) - [3D printer boards](#3d-printer-boards) - [Blues boards](#blues-boards) @@ -164,6 +165,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | :green_heart: | STM32WBA55CGU | Nucleo-WBA55CG | *2.8.0* | | | :green_heart: | STM32WB55RG | [P-Nucleo-WB55RG](https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html) | *1.6.0* | BLE support with [STM32duinoBLE](https://github.com/stm32duino/STM32duinoBLE) | | :green_heart: | STM32WB55CG | [P-Nucleo-WB55 USB Dongle](https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html) | *2.5.0* | BLE support with [STM32duinoBLE](https://github.com/stm32duino/STM32duinoBLE) | +| :yellow_heart: | STM32WL3CCV | [Nucleo-WL33CC1](https://www.st.com/en/evaluation-tools/nucleo-wl33cc1.html) | **2.12.0** | | | :green_heart: | STM32WL55JC | [Nucleo WL55JC1](https://www.st.com/en/evaluation-tools/nucleo-wl55jc.html) | *2.1.0* | LoRa support not available | @@ -820,6 +822,13 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d | :----: | :-------: | ---- | :-----: | :---- | | :green_heart: | STM32WBA55CEU
STM32WBA55CGU | Generic Board | *2.8.0* | | +### Generic STM32WL3 boards + +| Status | Device(s) | Name | Release | Notes | +| :----: | :-------: | ---- | :-----: | :---- | +| :yellow_heart: | STM32WL3C8V
STM32WL3CBV
STM32WL3CCV | Generic Board | **2.12.0** | | +| :yellow_heart: | STM32WL3C8VX
STM32WL3CBVX
STM32WL3CCVX | Generic Board | **2.12.0** | | + ### Generic STM32WL boards | Status | Device(s) | Name | Release | Notes | diff --git a/boards.txt b/boards.txt index 4e24c37f56..2aaca71b91 100644 --- a/boards.txt +++ b/boards.txt @@ -984,6 +984,23 @@ Nucleo_64.menu.pnum.NUCLEO_WBA55CG.build.variant=STM32WBAxx/WBA55C(E-G)U Nucleo_64.menu.pnum.NUCLEO_WBA55CG.openocd.target=stm32wbax Nucleo_64.menu.pnum.NUCLEO_WBA55CG.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WBAxx/STM32WBA55.svd +# NUCLEO_WL3CC1 board +Nucleo_64.menu.pnum.NUCLEO_WL33CC1=Nucleo WL33CC1 +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.node="NOD_WL33CC" +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.upload.maximum_size=262144 +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.upload.maximum_data_size=32768 +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.build.mcu=cortex-m0plus +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.build.board=NUCLEO_WL33CC1 +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.build.series=STM32WL3x +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.build.product_line=STM32WL3xx +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.build.st_extra_flags=-D{build.product_line} {build.xSerial} -D__CORTEX_SC=0 +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.openocd.target=stm32wl3x +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.upload.address=0x10040000 +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.upload.mode=hwRstPulse +Nucleo_64.menu.pnum.NUCLEO_WL33CC1.upload.start=0x10000000 + # NUCLEO_WL55JC1 board Nucleo_64.menu.pnum.NUCLEO_WL55JC1=Nucleo WL55JC1 Nucleo_64.menu.pnum.NUCLEO_WL55JC1.node="NOD_WL55JC" @@ -13390,6 +13407,93 @@ GenWBA.menu.upload_method.OpenOCDDapLink=OpenOCD DapLink (SWD) GenWBA.menu.upload_method.OpenOCDDapLink.upload.protocol=cmsis-dap GenWBA.menu.upload_method.OpenOCDDapLink.upload.tool=openocd_upload +################################################################################ +# Generic WL3 +GenWL3.name=Generic STM32WL3 series + +GenWL3.build.core=arduino +GenWL3.build.board=GenWL3 +GenWL3.build.st_extra_flags=-D{build.product_line} {build.xSerial} -D__CORTEX_SC=0 +GenWL3.build.mcu=cortex-m0plus +GenWL3.build.series=STM32WL3x +GenWL3.build.flash_offset=0x0 +GenWL3.upload.maximum_size=0 +GenWL3.upload.maximum_data_size=0 +GenWL3.openocd.target=stm32wl3x +GenWL3.upload.address=0x10040000 +GenWL3.upload.mode=hwRstPulse +GenWL3.upload.start=0x10000000 + +# Generic WL33C8Vx +GenWL3.menu.pnum.GENERIC_WL33C8VX=Generic WL33C8Vx +GenWL3.menu.pnum.GENERIC_WL33C8VX.upload.maximum_size=65536 +GenWL3.menu.pnum.GENERIC_WL33C8VX.upload.maximum_data_size=16384 +GenWL3.menu.pnum.GENERIC_WL33C8VX.build.board=GENERIC_WL33C8VX +GenWL3.menu.pnum.GENERIC_WL33C8VX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33C8VX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33C8VX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33C8VxX +GenWL3.menu.pnum.GENERIC_WL33C8VXX=Generic WL33C8VxX +GenWL3.menu.pnum.GENERIC_WL33C8VXX.upload.maximum_size=65536 +GenWL3.menu.pnum.GENERIC_WL33C8VXX.upload.maximum_data_size=16384 +GenWL3.menu.pnum.GENERIC_WL33C8VXX.build.board=GENERIC_WL33C8VXX +GenWL3.menu.pnum.GENERIC_WL33C8VXX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33C8VXX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33C8VXX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33CBVx +GenWL3.menu.pnum.GENERIC_WL33CBVX=Generic WL33CBVx +GenWL3.menu.pnum.GENERIC_WL33CBVX.upload.maximum_size=131072 +GenWL3.menu.pnum.GENERIC_WL33CBVX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33CBVX.build.board=GENERIC_WL33CBVX +GenWL3.menu.pnum.GENERIC_WL33CBVX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33CBVX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33CBVX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33CBVxX +GenWL3.menu.pnum.GENERIC_WL33CBVXX=Generic WL33CBVxX +GenWL3.menu.pnum.GENERIC_WL33CBVXX.upload.maximum_size=131072 +GenWL3.menu.pnum.GENERIC_WL33CBVXX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33CBVXX.build.board=GENERIC_WL33CBVXX +GenWL3.menu.pnum.GENERIC_WL33CBVXX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33CBVXX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33CBVXX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33CCVx +GenWL3.menu.pnum.GENERIC_WL33CCVX=Generic WL33CCVx +GenWL3.menu.pnum.GENERIC_WL33CCVX.upload.maximum_size=262144 +GenWL3.menu.pnum.GENERIC_WL33CCVX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33CCVX.build.board=GENERIC_WL33CCVX +GenWL3.menu.pnum.GENERIC_WL33CCVX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33CCVX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33CCVX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33CCVxX +GenWL3.menu.pnum.GENERIC_WL33CCVXX=Generic WL33CCVxX +GenWL3.menu.pnum.GENERIC_WL33CCVXX.upload.maximum_size=262144 +GenWL3.menu.pnum.GENERIC_WL33CCVXX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33CCVXX.build.board=GENERIC_WL33CCVXX +GenWL3.menu.pnum.GENERIC_WL33CCVXX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33CCVXX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33CCVXX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Upload menu +GenWL3.menu.upload_method.swdMethod=STM32CubeProgrammer (SWD) +GenWL3.menu.upload_method.swdMethod.upload.protocol=swd +GenWL3.menu.upload_method.swdMethod.upload.options=-a {upload.address} -m {upload.mode} -s {upload.start} +GenWL3.menu.upload_method.swdMethod.upload.tool=stm32CubeProg + +GenWL3.menu.upload_method.jlinkMethod=STM32CubeProgrammer (J-Link) +GenWL3.menu.upload_method.jlinkMethod.upload.protocol=jlink +GenWL3.menu.upload_method.jlinkMethod.upload.options= +GenWL3.menu.upload_method.jlinkMethod.upload.tool=stm32CubeProg + +GenWL3.menu.upload_method.serialMethod=STM32CubeProgrammer (Serial) +GenWL3.menu.upload_method.serialMethod.upload.protocol=serial +GenWL3.menu.upload_method.serialMethod.upload.options=-c {serial.port.file} +GenWL3.menu.upload_method.serialMethod.upload.tool=stm32CubeProg + ################################################################################ # Generic WL GenWL.name=Generic STM32WL series @@ -14911,6 +15015,12 @@ GenWBA.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE GenWBA.menu.xserial.disabled=Disabled (no Serial support) GenWBA.menu.xserial.disabled.build.xSerial= +GenWL3.menu.xserial.generic=Enabled (generic 'Serial') +GenWL3.menu.xserial.none=Enabled (no generic 'Serial') +GenWL3.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE +GenWL3.menu.xserial.disabled=Disabled (no Serial support) +GenWL3.menu.xserial.disabled.build.xSerial= + GenWL.menu.xserial.generic=Enabled (generic 'Serial') GenWL.menu.xserial.none=Enabled (no generic 'Serial') GenWL.menu.xserial.none.build.xSerial=-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE @@ -15905,6 +16015,26 @@ GenWBA.menu.opt.ogstd.build.flags.optimize=-Og GenWBA.menu.opt.o0std=No Optimization (-O0) GenWBA.menu.opt.o0std.build.flags.optimize=-O0 +GenWL3.menu.opt.osstd=Smallest (-Os default) +GenWL3.menu.opt.oslto=Smallest (-Os) with LTO +GenWL3.menu.opt.oslto.build.flags.optimize=-Os -flto +GenWL3.menu.opt.o1std=Fast (-O1) +GenWL3.menu.opt.o1std.build.flags.optimize=-O1 +GenWL3.menu.opt.o1lto=Fast (-O1) with LTO +GenWL3.menu.opt.o1lto.build.flags.optimize=-O1 -flto +GenWL3.menu.opt.o2std=Faster (-O2) +GenWL3.menu.opt.o2std.build.flags.optimize=-O2 +GenWL3.menu.opt.o2lto=Faster (-O2) with LTO +GenWL3.menu.opt.o2lto.build.flags.optimize=-O2 -flto +GenWL3.menu.opt.o3std=Fastest (-O3) +GenWL3.menu.opt.o3std.build.flags.optimize=-O3 +GenWL3.menu.opt.o3lto=Fastest (-O3) with LTO +GenWL3.menu.opt.o3lto.build.flags.optimize=-O3 -flto +GenWL3.menu.opt.ogstd=Debug (-Og) +GenWL3.menu.opt.ogstd.build.flags.optimize=-Og +GenWL3.menu.opt.o0std=No Optimization (-O0) +GenWL3.menu.opt.o0std.build.flags.optimize=-O0 + GenWL.menu.opt.osstd=Smallest (-Os default) GenWL.menu.opt.oslto=Smallest (-Os) with LTO GenWL.menu.opt.oslto.build.flags.optimize=-Os -flto @@ -16378,6 +16508,14 @@ GenWBA.menu.dbg.enable_log.build.flags.debug= GenWBA.menu.dbg.enable_all=Core Logs and Symbols Enabled (-g) GenWBA.menu.dbg.enable_all.build.flags.debug=-g +GenWL3.menu.dbg.none=None +GenWL3.menu.dbg.enable_sym=Symbols Enabled (-g) +GenWL3.menu.dbg.enable_sym.build.flags.debug=-g -DNDEBUG +GenWL3.menu.dbg.enable_log=Core logs Enabled +GenWL3.menu.dbg.enable_log.build.flags.debug= +GenWL3.menu.dbg.enable_all=Core Logs and Symbols Enabled (-g) +GenWL3.menu.dbg.enable_all.build.flags.debug=-g + GenWL.menu.dbg.none=None GenWL.menu.dbg.enable_sym=Symbols Enabled (-g) GenWL.menu.dbg.enable_sym.build.flags.debug=-g -DNDEBUG @@ -16753,6 +16891,16 @@ GenWBA.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_floa GenWBA.menu.rtlib.full=Newlib Standard GenWBA.menu.rtlib.full.build.flags.ldspecs= +GenWL3.menu.rtlib.nano=Newlib Nano (default) +GenWL3.menu.rtlib.nanofp=Newlib Nano + Float Printf +GenWL3.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float +GenWL3.menu.rtlib.nanofs=Newlib Nano + Float Scanf +GenWL3.menu.rtlib.nanofs.build.flags.ldspecs=--specs=nano.specs -u _scanf_float +GenWL3.menu.rtlib.nanofps=Newlib Nano + Float Printf/Scanf +GenWL3.menu.rtlib.nanofps.build.flags.ldspecs=--specs=nano.specs -u _printf_float -u _scanf_float +GenWL3.menu.rtlib.full=Newlib Standard +GenWL3.menu.rtlib.full.build.flags.ldspecs= + GenWL.menu.rtlib.nano=Newlib Nano (default) GenWL.menu.rtlib.nanofp=Newlib Nano + Float Printf GenWL.menu.rtlib.nanofp.build.flags.ldspecs=--specs=nano.specs -u _printf_float diff --git a/cmake/boards_db.cmake b/cmake/boards_db.cmake index 4f46d938e2..21b853aa93 100644 --- a/cmake/boards_db.cmake +++ b/cmake/boards_db.cmake @@ -4494,6 +4494,214 @@ target_compile_options(DAISY_SEED_xusb_HSFS INTERFACE "SHELL:-DUSE_USB_HS -DUSE_USB_HS_IN_FS" ) +# DATABOARD +# ----------------------------------------------------------------------------- + +set(DATABOARD_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32F1xx/F103C8T_F103CB(T-U)") +set(DATABOARD_MAXSIZE 65536) +set(DATABOARD_MAXDATASIZE 20480) +set(DATABOARD_MCU cortex-m3) +set(DATABOARD_FPCONF "-") +add_library(DATABOARD INTERFACE) +target_compile_options(DATABOARD INTERFACE + "SHELL:-DSTM32F103xB" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${DATABOARD_MCU} +) +target_compile_definitions(DATABOARD INTERFACE + "STM32F1xx" + "ARDUINO_DATABOARD" + "BOARD_NAME=\"DATABOARD\"" + "BOARD_ID=DATABOARD" + "VARIANT_H=\"variant_DATABOARD.h\"" +) +target_include_directories(DATABOARD INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32F1xx + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F1xx_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F1xx_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F1xx/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/ + ${DATABOARD_VARIANT_PATH} +) + +target_link_options(DATABOARD INTERFACE + "LINKER:--default-script=${DATABOARD_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=65536" + "LINKER:--defsym=LD_MAX_DATA_SIZE=20480" + "SHELL: " + -mcpu=${DATABOARD_MCU} +) + +add_library(DATABOARD_serial_disabled INTERFACE) +target_compile_options(DATABOARD_serial_disabled INTERFACE + "SHELL:" +) +add_library(DATABOARD_serial_generic INTERFACE) +target_compile_options(DATABOARD_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(DATABOARD_serial_none INTERFACE) +target_compile_options(DATABOARD_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) +add_library(DATABOARD_usb_CDC INTERFACE) +target_compile_options(DATABOARD_usb_CDC INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DDISABLE_GENERIC_SERIALUSB" +) +add_library(DATABOARD_usb_CDCgen INTERFACE) +target_compile_options(DATABOARD_usb_CDCgen INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC" +) +add_library(DATABOARD_usb_HID INTERFACE) +target_compile_options(DATABOARD_usb_HID INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_HID_COMPOSITE" +) +add_library(DATABOARD_usb_none INTERFACE) +target_compile_options(DATABOARD_usb_none INTERFACE + "SHELL:" +) +add_library(DATABOARD_xusb_FS INTERFACE) +target_compile_options(DATABOARD_xusb_FS INTERFACE + "SHELL:" +) +add_library(DATABOARD_xusb_HS INTERFACE) +target_compile_options(DATABOARD_xusb_HS INTERFACE + "SHELL:-DUSE_USB_HS" +) +add_library(DATABOARD_xusb_HSFS INTERFACE) +target_compile_options(DATABOARD_xusb_HSFS INTERFACE + "SHELL:-DUSE_USB_HS -DUSE_USB_HS_IN_FS" +) + +# DATABOARD_dfu2 +# ----------------------------------------------------------------------------- + +set(DATABOARD_dfu2_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32F1xx/F103C8T_F103CB(T-U)") +set(DATABOARD_dfu2_MAXSIZE 65536) +set(DATABOARD_dfu2_MAXDATASIZE 20480) +set(DATABOARD_dfu2_MCU cortex-m3) +set(DATABOARD_dfu2_FPCONF "-") +add_library(DATABOARD_dfu2 INTERFACE) +target_compile_options(DATABOARD_dfu2 INTERFACE + "SHELL:-DSTM32F103xB -DHAL_UART_MODULE_ENABLED -DBL_LEGACY_LEAF" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${DATABOARD_dfu2_MCU} +) +target_compile_definitions(DATABOARD_dfu2 INTERFACE + "STM32F1xx" + "ARDUINO_DATABOARD" + "BOARD_NAME=\"DATABOARD\"" + "BOARD_ID=DATABOARD" + "VARIANT_H=\"variant_DATABOARD.h\"" +) +target_include_directories(DATABOARD_dfu2 INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32F1xx + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F1xx_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F1xx_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F1xx/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/ + ${DATABOARD_dfu2_VARIANT_PATH} +) + +target_link_options(DATABOARD_dfu2 INTERFACE + "LINKER:--default-script=${DATABOARD_dfu2_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x2000" + "LINKER:--defsym=LD_MAX_SIZE=65536" + "LINKER:--defsym=LD_MAX_DATA_SIZE=20480" + "SHELL: " + -mcpu=${DATABOARD_dfu2_MCU} +) + + +# DATABOARD_dfuo +# ----------------------------------------------------------------------------- + +set(DATABOARD_dfuo_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32F1xx/F103C8T_F103CB(T-U)") +set(DATABOARD_dfuo_MAXSIZE 65536) +set(DATABOARD_dfuo_MAXDATASIZE 20480) +set(DATABOARD_dfuo_MCU cortex-m3) +set(DATABOARD_dfuo_FPCONF "-") +add_library(DATABOARD_dfuo INTERFACE) +target_compile_options(DATABOARD_dfuo INTERFACE + "SHELL:-DSTM32F103xB -DHAL_UART_MODULE_ENABLED -DBL_LEGACY_LEAF" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${DATABOARD_dfuo_MCU} +) +target_compile_definitions(DATABOARD_dfuo INTERFACE + "STM32F1xx" + "ARDUINO_DATABOARD" + "BOARD_NAME=\"DATABOARD\"" + "BOARD_ID=DATABOARD" + "VARIANT_H=\"variant_DATABOARD.h\"" +) +target_include_directories(DATABOARD_dfuo INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32F1xx + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F1xx_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F1xx_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F1xx/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/ + ${DATABOARD_dfuo_VARIANT_PATH} +) + +target_link_options(DATABOARD_dfuo INTERFACE + "LINKER:--default-script=${DATABOARD_dfuo_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x5000" + "LINKER:--defsym=LD_MAX_SIZE=65536" + "LINKER:--defsym=LD_MAX_DATA_SIZE=20480" + "SHELL: " + -mcpu=${DATABOARD_dfuo_MCU} +) + + +# DATABOARD_hid +# ----------------------------------------------------------------------------- + +set(DATABOARD_hid_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32F1xx/F103C8T_F103CB(T-U)") +set(DATABOARD_hid_MAXSIZE 65536) +set(DATABOARD_hid_MAXDATASIZE 20480) +set(DATABOARD_hid_MCU cortex-m3) +set(DATABOARD_hid_FPCONF "-") +add_library(DATABOARD_hid INTERFACE) +target_compile_options(DATABOARD_hid INTERFACE + "SHELL:-DSTM32F103xB -DHAL_UART_MODULE_ENABLED -DBL_HID" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${DATABOARD_hid_MCU} +) +target_compile_definitions(DATABOARD_hid INTERFACE + "STM32F1xx" + "ARDUINO_DATABOARD" + "BOARD_NAME=\"DATABOARD\"" + "BOARD_ID=DATABOARD" + "VARIANT_H=\"variant_DATABOARD.h\"" +) +target_include_directories(DATABOARD_hid INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32F1xx + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F1xx_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F1xx_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F1xx/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/ + ${DATABOARD_hid_VARIANT_PATH} +) + +target_link_options(DATABOARD_hid INTERFACE + "LINKER:--default-script=${DATABOARD_hid_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x800" + "LINKER:--defsym=LD_MAX_SIZE=65536" + "LINKER:--defsym=LD_MAX_DATA_SIZE=20480" + "SHELL: " + -mcpu=${DATABOARD_hid_MCU} +) + + # DEMO_F030F4 # ----------------------------------------------------------------------------- @@ -5332,6 +5540,88 @@ target_compile_options(DISCO_F407VG_xusb_HSFS INTERFACE "SHELL:-DUSE_USB_HS -DUSE_USB_HS_IN_FS" ) +# DISCO_F411VE +# ----------------------------------------------------------------------------- + +set(DISCO_F411VE_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32F4xx/F411V(C-E)T") +set(DISCO_F411VE_MAXSIZE 524288) +set(DISCO_F411VE_MAXDATASIZE 131072) +set(DISCO_F411VE_MCU cortex-m4) +set(DISCO_F411VE_FPCONF "fpv4-sp-d16-hard") +add_library(DISCO_F411VE INTERFACE) +target_compile_options(DISCO_F411VE INTERFACE + "SHELL:-DSTM32F411xE" + "SHELL:" + "SHELL:" + "SHELL:-mfpu=fpv4-sp-d16 -mfloat-abi=hard" + -mcpu=${DISCO_F411VE_MCU} +) +target_compile_definitions(DISCO_F411VE INTERFACE + "STM32F4xx" + "ARDUINO_DISCO_F411VE" + "BOARD_NAME=\"DISCO_F411VE\"" + "BOARD_ID=DISCO_F411VE" + "VARIANT_H=\"variant_DISCO_F411VE.h\"" +) +target_include_directories(DISCO_F411VE INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32F4xx + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F4xx_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F4xx_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/ + ${DISCO_F411VE_VARIANT_PATH} +) + +target_link_options(DISCO_F411VE INTERFACE + "LINKER:--default-script=${DISCO_F411VE_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=524288" + "LINKER:--defsym=LD_MAX_DATA_SIZE=131072" + "SHELL:-mfpu=fpv4-sp-d16 -mfloat-abi=hard" + -mcpu=${DISCO_F411VE_MCU} +) + +add_library(DISCO_F411VE_serial_disabled INTERFACE) +target_compile_options(DISCO_F411VE_serial_disabled INTERFACE + "SHELL:" +) +add_library(DISCO_F411VE_serial_generic INTERFACE) +target_compile_options(DISCO_F411VE_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(DISCO_F411VE_serial_none INTERFACE) +target_compile_options(DISCO_F411VE_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) +add_library(DISCO_F411VE_usb_CDC INTERFACE) +target_compile_options(DISCO_F411VE_usb_CDC INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DDISABLE_GENERIC_SERIALUSB" +) +add_library(DISCO_F411VE_usb_CDCgen INTERFACE) +target_compile_options(DISCO_F411VE_usb_CDCgen INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC" +) +add_library(DISCO_F411VE_usb_HID INTERFACE) +target_compile_options(DISCO_F411VE_usb_HID INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_HID_COMPOSITE" +) +add_library(DISCO_F411VE_usb_none INTERFACE) +target_compile_options(DISCO_F411VE_usb_none INTERFACE + "SHELL:" +) +add_library(DISCO_F411VE_xusb_FS INTERFACE) +target_compile_options(DISCO_F411VE_xusb_FS INTERFACE + "SHELL:" +) +add_library(DISCO_F411VE_xusb_HS INTERFACE) +target_compile_options(DISCO_F411VE_xusb_HS INTERFACE + "SHELL:-DUSE_USB_HS" +) +add_library(DISCO_F411VE_xusb_HSFS INTERFACE) +target_compile_options(DISCO_F411VE_xusb_HSFS INTERFACE + "SHELL:-DUSE_USB_HS -DUSE_USB_HS_IN_FS" +) + # DISCO_F413ZH # ----------------------------------------------------------------------------- @@ -42682,6 +42972,254 @@ target_link_options(GENERIC_F411RETX_hid INTERFACE ) +# GENERIC_F411VCTX +# ----------------------------------------------------------------------------- + +set(GENERIC_F411VCTX_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32F4xx/F411V(C-E)T") +set(GENERIC_F411VCTX_MAXSIZE 262144) +set(GENERIC_F411VCTX_MAXDATASIZE 131072) +set(GENERIC_F411VCTX_MCU cortex-m4) +set(GENERIC_F411VCTX_FPCONF "-") +add_library(GENERIC_F411VCTX INTERFACE) +target_compile_options(GENERIC_F411VCTX INTERFACE + "SHELL:-DSTM32F411xE" + "SHELL:" + "SHELL:" + "SHELL:-mfpu=fpv4-sp-d16 -mfloat-abi=hard" + -mcpu=${GENERIC_F411VCTX_MCU} +) +target_compile_definitions(GENERIC_F411VCTX INTERFACE + "STM32F4xx" + "ARDUINO_GENERIC_F411VCTX" + "BOARD_NAME=\"GENERIC_F411VCTX\"" + "BOARD_ID=GENERIC_F411VCTX" + "VARIANT_H=\"variant_generic.h\"" +) +target_include_directories(GENERIC_F411VCTX INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32F4xx + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F4xx_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F4xx_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/ + ${GENERIC_F411VCTX_VARIANT_PATH} +) + +target_link_options(GENERIC_F411VCTX INTERFACE + "LINKER:--default-script=${GENERIC_F411VCTX_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=262144" + "LINKER:--defsym=LD_MAX_DATA_SIZE=131072" + "SHELL:-mfpu=fpv4-sp-d16 -mfloat-abi=hard" + -mcpu=${GENERIC_F411VCTX_MCU} +) + +add_library(GENERIC_F411VCTX_serial_disabled INTERFACE) +target_compile_options(GENERIC_F411VCTX_serial_disabled INTERFACE + "SHELL:" +) +add_library(GENERIC_F411VCTX_serial_generic INTERFACE) +target_compile_options(GENERIC_F411VCTX_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(GENERIC_F411VCTX_serial_none INTERFACE) +target_compile_options(GENERIC_F411VCTX_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) +add_library(GENERIC_F411VCTX_usb_CDC INTERFACE) +target_compile_options(GENERIC_F411VCTX_usb_CDC INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DDISABLE_GENERIC_SERIALUSB" +) +add_library(GENERIC_F411VCTX_usb_CDCgen INTERFACE) +target_compile_options(GENERIC_F411VCTX_usb_CDCgen INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC" +) +add_library(GENERIC_F411VCTX_usb_HID INTERFACE) +target_compile_options(GENERIC_F411VCTX_usb_HID INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_HID_COMPOSITE" +) +add_library(GENERIC_F411VCTX_usb_none INTERFACE) +target_compile_options(GENERIC_F411VCTX_usb_none INTERFACE + "SHELL:" +) +add_library(GENERIC_F411VCTX_xusb_FS INTERFACE) +target_compile_options(GENERIC_F411VCTX_xusb_FS INTERFACE + "SHELL:" +) +add_library(GENERIC_F411VCTX_xusb_HS INTERFACE) +target_compile_options(GENERIC_F411VCTX_xusb_HS INTERFACE + "SHELL:-DUSE_USB_HS" +) +add_library(GENERIC_F411VCTX_xusb_HSFS INTERFACE) +target_compile_options(GENERIC_F411VCTX_xusb_HSFS INTERFACE + "SHELL:-DUSE_USB_HS -DUSE_USB_HS_IN_FS" +) + +# GENERIC_F411VCTX_hid +# ----------------------------------------------------------------------------- + +set(GENERIC_F411VCTX_hid_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32F4xx/F411V(C-E)T") +set(GENERIC_F411VCTX_hid_MAXSIZE 262144) +set(GENERIC_F411VCTX_hid_MAXDATASIZE 131072) +set(GENERIC_F411VCTX_hid_MCU cortex-m4) +set(GENERIC_F411VCTX_hid_FPCONF "-") +add_library(GENERIC_F411VCTX_hid INTERFACE) +target_compile_options(GENERIC_F411VCTX_hid INTERFACE + "SHELL:-DSTM32F411xE -DHAL_UART_MODULE_ENABLED -DBL_HID" + "SHELL:" + "SHELL:" + "SHELL:-mfpu=fpv4-sp-d16 -mfloat-abi=hard" + -mcpu=${GENERIC_F411VCTX_hid_MCU} +) +target_compile_definitions(GENERIC_F411VCTX_hid INTERFACE + "STM32F4xx" + "ARDUINO_GENERIC_F411VCTX" + "BOARD_NAME=\"GENERIC_F411VCTX\"" + "BOARD_ID=GENERIC_F411VCTX" + "VARIANT_H=\"variant_generic.h\"" +) +target_include_directories(GENERIC_F411VCTX_hid INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32F4xx + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F4xx_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F4xx_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/ + ${GENERIC_F411VCTX_hid_VARIANT_PATH} +) + +target_link_options(GENERIC_F411VCTX_hid INTERFACE + "LINKER:--default-script=${GENERIC_F411VCTX_hid_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x4000" + "LINKER:--defsym=LD_MAX_SIZE=262144" + "LINKER:--defsym=LD_MAX_DATA_SIZE=131072" + "SHELL:-mfpu=fpv4-sp-d16 -mfloat-abi=hard" + -mcpu=${GENERIC_F411VCTX_hid_MCU} +) + + +# GENERIC_F411VETX +# ----------------------------------------------------------------------------- + +set(GENERIC_F411VETX_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32F4xx/F411V(C-E)T") +set(GENERIC_F411VETX_MAXSIZE 524288) +set(GENERIC_F411VETX_MAXDATASIZE 131072) +set(GENERIC_F411VETX_MCU cortex-m4) +set(GENERIC_F411VETX_FPCONF "-") +add_library(GENERIC_F411VETX INTERFACE) +target_compile_options(GENERIC_F411VETX INTERFACE + "SHELL:-DSTM32F411xE" + "SHELL:" + "SHELL:" + "SHELL:-mfpu=fpv4-sp-d16 -mfloat-abi=hard" + -mcpu=${GENERIC_F411VETX_MCU} +) +target_compile_definitions(GENERIC_F411VETX INTERFACE + "STM32F4xx" + "ARDUINO_GENERIC_F411VETX" + "BOARD_NAME=\"GENERIC_F411VETX\"" + "BOARD_ID=GENERIC_F411VETX" + "VARIANT_H=\"variant_generic.h\"" +) +target_include_directories(GENERIC_F411VETX INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32F4xx + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F4xx_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F4xx_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/ + ${GENERIC_F411VETX_VARIANT_PATH} +) + +target_link_options(GENERIC_F411VETX INTERFACE + "LINKER:--default-script=${GENERIC_F411VETX_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=524288" + "LINKER:--defsym=LD_MAX_DATA_SIZE=131072" + "SHELL:-mfpu=fpv4-sp-d16 -mfloat-abi=hard" + -mcpu=${GENERIC_F411VETX_MCU} +) + +add_library(GENERIC_F411VETX_serial_disabled INTERFACE) +target_compile_options(GENERIC_F411VETX_serial_disabled INTERFACE + "SHELL:" +) +add_library(GENERIC_F411VETX_serial_generic INTERFACE) +target_compile_options(GENERIC_F411VETX_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(GENERIC_F411VETX_serial_none INTERFACE) +target_compile_options(GENERIC_F411VETX_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) +add_library(GENERIC_F411VETX_usb_CDC INTERFACE) +target_compile_options(GENERIC_F411VETX_usb_CDC INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DDISABLE_GENERIC_SERIALUSB" +) +add_library(GENERIC_F411VETX_usb_CDCgen INTERFACE) +target_compile_options(GENERIC_F411VETX_usb_CDCgen INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC" +) +add_library(GENERIC_F411VETX_usb_HID INTERFACE) +target_compile_options(GENERIC_F411VETX_usb_HID INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_HID_COMPOSITE" +) +add_library(GENERIC_F411VETX_usb_none INTERFACE) +target_compile_options(GENERIC_F411VETX_usb_none INTERFACE + "SHELL:" +) +add_library(GENERIC_F411VETX_xusb_FS INTERFACE) +target_compile_options(GENERIC_F411VETX_xusb_FS INTERFACE + "SHELL:" +) +add_library(GENERIC_F411VETX_xusb_HS INTERFACE) +target_compile_options(GENERIC_F411VETX_xusb_HS INTERFACE + "SHELL:-DUSE_USB_HS" +) +add_library(GENERIC_F411VETX_xusb_HSFS INTERFACE) +target_compile_options(GENERIC_F411VETX_xusb_HSFS INTERFACE + "SHELL:-DUSE_USB_HS -DUSE_USB_HS_IN_FS" +) + +# GENERIC_F411VETX_hid +# ----------------------------------------------------------------------------- + +set(GENERIC_F411VETX_hid_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32F4xx/F411V(C-E)T") +set(GENERIC_F411VETX_hid_MAXSIZE 524288) +set(GENERIC_F411VETX_hid_MAXDATASIZE 131072) +set(GENERIC_F411VETX_hid_MCU cortex-m4) +set(GENERIC_F411VETX_hid_FPCONF "-") +add_library(GENERIC_F411VETX_hid INTERFACE) +target_compile_options(GENERIC_F411VETX_hid INTERFACE + "SHELL:-DSTM32F411xE -DHAL_UART_MODULE_ENABLED -DBL_HID" + "SHELL:" + "SHELL:" + "SHELL:-mfpu=fpv4-sp-d16 -mfloat-abi=hard" + -mcpu=${GENERIC_F411VETX_hid_MCU} +) +target_compile_definitions(GENERIC_F411VETX_hid INTERFACE + "STM32F4xx" + "ARDUINO_GENERIC_F411VETX" + "BOARD_NAME=\"GENERIC_F411VETX\"" + "BOARD_ID=GENERIC_F411VETX" + "VARIANT_H=\"variant_generic.h\"" +) +target_include_directories(GENERIC_F411VETX_hid INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32F4xx + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F4xx_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32F4xx_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/ + ${GENERIC_F411VETX_hid_VARIANT_PATH} +) + +target_link_options(GENERIC_F411VETX_hid INTERFACE + "LINKER:--default-script=${GENERIC_F411VETX_hid_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x4000" + "LINKER:--defsym=LD_MAX_SIZE=524288" + "LINKER:--defsym=LD_MAX_DATA_SIZE=131072" + "SHELL:-mfpu=fpv4-sp-d16 -mfloat-abi=hard" + -mcpu=${GENERIC_F411VETX_hid_MCU} +) + + # GENERIC_F412CEUX # ----------------------------------------------------------------------------- @@ -106064,6 +106602,330 @@ target_compile_options(GENERIC_WBA55CGUX_serial_none INTERFACE "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" ) +# GENERIC_WL33C8VX +# ----------------------------------------------------------------------------- + +set(GENERIC_WL33C8VX_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32WL3x/WL33C(8-B-C)Vx(X)") +set(GENERIC_WL33C8VX_MAXSIZE 65536) +set(GENERIC_WL33C8VX_MAXDATASIZE 16384) +set(GENERIC_WL33C8VX_MCU cortex-m0plus) +set(GENERIC_WL33C8VX_FPCONF "-") +add_library(GENERIC_WL33C8VX INTERFACE) +target_compile_options(GENERIC_WL33C8VX INTERFACE + "SHELL:-DSTM32WL3xx -D__CORTEX_SC=0" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${GENERIC_WL33C8VX_MCU} +) +target_compile_definitions(GENERIC_WL33C8VX INTERFACE + "STM32WL3x" + "ARDUINO_GENERIC_WL33C8VX" + "BOARD_NAME=\"GENERIC_WL33C8VX\"" + "BOARD_ID=GENERIC_WL33C8VX" + "VARIANT_H=\"variant_generic.h\"" +) +target_include_directories(GENERIC_WL33C8VX INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32WL3x + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/ + ${GENERIC_WL33C8VX_VARIANT_PATH} +) + +target_link_options(GENERIC_WL33C8VX INTERFACE + "LINKER:--default-script=${GENERIC_WL33C8VX_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=65536" + "LINKER:--defsym=LD_MAX_DATA_SIZE=16384" + "SHELL: " + -mcpu=${GENERIC_WL33C8VX_MCU} +) + +add_library(GENERIC_WL33C8VX_serial_disabled INTERFACE) +target_compile_options(GENERIC_WL33C8VX_serial_disabled INTERFACE + "SHELL:" +) +add_library(GENERIC_WL33C8VX_serial_generic INTERFACE) +target_compile_options(GENERIC_WL33C8VX_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(GENERIC_WL33C8VX_serial_none INTERFACE) +target_compile_options(GENERIC_WL33C8VX_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) + +# GENERIC_WL33C8VXX +# ----------------------------------------------------------------------------- + +set(GENERIC_WL33C8VXX_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32WL3x/WL33C(8-B-C)Vx(X)") +set(GENERIC_WL33C8VXX_MAXSIZE 65536) +set(GENERIC_WL33C8VXX_MAXDATASIZE 16384) +set(GENERIC_WL33C8VXX_MCU cortex-m0plus) +set(GENERIC_WL33C8VXX_FPCONF "-") +add_library(GENERIC_WL33C8VXX INTERFACE) +target_compile_options(GENERIC_WL33C8VXX INTERFACE + "SHELL:-DSTM32WL3xx -D__CORTEX_SC=0" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${GENERIC_WL33C8VXX_MCU} +) +target_compile_definitions(GENERIC_WL33C8VXX INTERFACE + "STM32WL3x" + "ARDUINO_GENERIC_WL33C8VXX" + "BOARD_NAME=\"GENERIC_WL33C8VXX\"" + "BOARD_ID=GENERIC_WL33C8VXX" + "VARIANT_H=\"variant_generic.h\"" +) +target_include_directories(GENERIC_WL33C8VXX INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32WL3x + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/ + ${GENERIC_WL33C8VXX_VARIANT_PATH} +) + +target_link_options(GENERIC_WL33C8VXX INTERFACE + "LINKER:--default-script=${GENERIC_WL33C8VXX_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=65536" + "LINKER:--defsym=LD_MAX_DATA_SIZE=16384" + "SHELL: " + -mcpu=${GENERIC_WL33C8VXX_MCU} +) + +add_library(GENERIC_WL33C8VXX_serial_disabled INTERFACE) +target_compile_options(GENERIC_WL33C8VXX_serial_disabled INTERFACE + "SHELL:" +) +add_library(GENERIC_WL33C8VXX_serial_generic INTERFACE) +target_compile_options(GENERIC_WL33C8VXX_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(GENERIC_WL33C8VXX_serial_none INTERFACE) +target_compile_options(GENERIC_WL33C8VXX_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) + +# GENERIC_WL33CBVX +# ----------------------------------------------------------------------------- + +set(GENERIC_WL33CBVX_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32WL3x/WL33C(8-B-C)Vx(X)") +set(GENERIC_WL33CBVX_MAXSIZE 131072) +set(GENERIC_WL33CBVX_MAXDATASIZE 32768) +set(GENERIC_WL33CBVX_MCU cortex-m0plus) +set(GENERIC_WL33CBVX_FPCONF "-") +add_library(GENERIC_WL33CBVX INTERFACE) +target_compile_options(GENERIC_WL33CBVX INTERFACE + "SHELL:-DSTM32WL3xx -D__CORTEX_SC=0" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${GENERIC_WL33CBVX_MCU} +) +target_compile_definitions(GENERIC_WL33CBVX INTERFACE + "STM32WL3x" + "ARDUINO_GENERIC_WL33CBVX" + "BOARD_NAME=\"GENERIC_WL33CBVX\"" + "BOARD_ID=GENERIC_WL33CBVX" + "VARIANT_H=\"variant_generic.h\"" +) +target_include_directories(GENERIC_WL33CBVX INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32WL3x + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/ + ${GENERIC_WL33CBVX_VARIANT_PATH} +) + +target_link_options(GENERIC_WL33CBVX INTERFACE + "LINKER:--default-script=${GENERIC_WL33CBVX_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=131072" + "LINKER:--defsym=LD_MAX_DATA_SIZE=32768" + "SHELL: " + -mcpu=${GENERIC_WL33CBVX_MCU} +) + +add_library(GENERIC_WL33CBVX_serial_disabled INTERFACE) +target_compile_options(GENERIC_WL33CBVX_serial_disabled INTERFACE + "SHELL:" +) +add_library(GENERIC_WL33CBVX_serial_generic INTERFACE) +target_compile_options(GENERIC_WL33CBVX_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(GENERIC_WL33CBVX_serial_none INTERFACE) +target_compile_options(GENERIC_WL33CBVX_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) + +# GENERIC_WL33CBVXX +# ----------------------------------------------------------------------------- + +set(GENERIC_WL33CBVXX_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32WL3x/WL33C(8-B-C)Vx(X)") +set(GENERIC_WL33CBVXX_MAXSIZE 131072) +set(GENERIC_WL33CBVXX_MAXDATASIZE 32768) +set(GENERIC_WL33CBVXX_MCU cortex-m0plus) +set(GENERIC_WL33CBVXX_FPCONF "-") +add_library(GENERIC_WL33CBVXX INTERFACE) +target_compile_options(GENERIC_WL33CBVXX INTERFACE + "SHELL:-DSTM32WL3xx -D__CORTEX_SC=0" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${GENERIC_WL33CBVXX_MCU} +) +target_compile_definitions(GENERIC_WL33CBVXX INTERFACE + "STM32WL3x" + "ARDUINO_GENERIC_WL33CBVXX" + "BOARD_NAME=\"GENERIC_WL33CBVXX\"" + "BOARD_ID=GENERIC_WL33CBVXX" + "VARIANT_H=\"variant_generic.h\"" +) +target_include_directories(GENERIC_WL33CBVXX INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32WL3x + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/ + ${GENERIC_WL33CBVXX_VARIANT_PATH} +) + +target_link_options(GENERIC_WL33CBVXX INTERFACE + "LINKER:--default-script=${GENERIC_WL33CBVXX_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=131072" + "LINKER:--defsym=LD_MAX_DATA_SIZE=32768" + "SHELL: " + -mcpu=${GENERIC_WL33CBVXX_MCU} +) + +add_library(GENERIC_WL33CBVXX_serial_disabled INTERFACE) +target_compile_options(GENERIC_WL33CBVXX_serial_disabled INTERFACE + "SHELL:" +) +add_library(GENERIC_WL33CBVXX_serial_generic INTERFACE) +target_compile_options(GENERIC_WL33CBVXX_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(GENERIC_WL33CBVXX_serial_none INTERFACE) +target_compile_options(GENERIC_WL33CBVXX_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) + +# GENERIC_WL33CCVX +# ----------------------------------------------------------------------------- + +set(GENERIC_WL33CCVX_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32WL3x/WL33C(8-B-C)Vx(X)") +set(GENERIC_WL33CCVX_MAXSIZE 262144) +set(GENERIC_WL33CCVX_MAXDATASIZE 32768) +set(GENERIC_WL33CCVX_MCU cortex-m0plus) +set(GENERIC_WL33CCVX_FPCONF "-") +add_library(GENERIC_WL33CCVX INTERFACE) +target_compile_options(GENERIC_WL33CCVX INTERFACE + "SHELL:-DSTM32WL3xx -D__CORTEX_SC=0" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${GENERIC_WL33CCVX_MCU} +) +target_compile_definitions(GENERIC_WL33CCVX INTERFACE + "STM32WL3x" + "ARDUINO_GENERIC_WL33CCVX" + "BOARD_NAME=\"GENERIC_WL33CCVX\"" + "BOARD_ID=GENERIC_WL33CCVX" + "VARIANT_H=\"variant_generic.h\"" +) +target_include_directories(GENERIC_WL33CCVX INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32WL3x + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/ + ${GENERIC_WL33CCVX_VARIANT_PATH} +) + +target_link_options(GENERIC_WL33CCVX INTERFACE + "LINKER:--default-script=${GENERIC_WL33CCVX_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=262144" + "LINKER:--defsym=LD_MAX_DATA_SIZE=32768" + "SHELL: " + -mcpu=${GENERIC_WL33CCVX_MCU} +) + +add_library(GENERIC_WL33CCVX_serial_disabled INTERFACE) +target_compile_options(GENERIC_WL33CCVX_serial_disabled INTERFACE + "SHELL:" +) +add_library(GENERIC_WL33CCVX_serial_generic INTERFACE) +target_compile_options(GENERIC_WL33CCVX_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(GENERIC_WL33CCVX_serial_none INTERFACE) +target_compile_options(GENERIC_WL33CCVX_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) + +# GENERIC_WL33CCVXX +# ----------------------------------------------------------------------------- + +set(GENERIC_WL33CCVXX_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32WL3x/WL33C(8-B-C)Vx(X)") +set(GENERIC_WL33CCVXX_MAXSIZE 262144) +set(GENERIC_WL33CCVXX_MAXDATASIZE 32768) +set(GENERIC_WL33CCVXX_MCU cortex-m0plus) +set(GENERIC_WL33CCVXX_FPCONF "-") +add_library(GENERIC_WL33CCVXX INTERFACE) +target_compile_options(GENERIC_WL33CCVXX INTERFACE + "SHELL:-DSTM32WL3xx -D__CORTEX_SC=0" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${GENERIC_WL33CCVXX_MCU} +) +target_compile_definitions(GENERIC_WL33CCVXX INTERFACE + "STM32WL3x" + "ARDUINO_GENERIC_WL33CCVXX" + "BOARD_NAME=\"GENERIC_WL33CCVXX\"" + "BOARD_ID=GENERIC_WL33CCVXX" + "VARIANT_H=\"variant_generic.h\"" +) +target_include_directories(GENERIC_WL33CCVXX INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32WL3x + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/ + ${GENERIC_WL33CCVXX_VARIANT_PATH} +) + +target_link_options(GENERIC_WL33CCVXX INTERFACE + "LINKER:--default-script=${GENERIC_WL33CCVXX_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=262144" + "LINKER:--defsym=LD_MAX_DATA_SIZE=32768" + "SHELL: " + -mcpu=${GENERIC_WL33CCVXX_MCU} +) + +add_library(GENERIC_WL33CCVXX_serial_disabled INTERFACE) +target_compile_options(GENERIC_WL33CCVXX_serial_disabled INTERFACE + "SHELL:" +) +add_library(GENERIC_WL33CCVXX_serial_generic INTERFACE) +target_compile_options(GENERIC_WL33CCVXX_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(GENERIC_WL33CCVXX_serial_none INTERFACE) +target_compile_options(GENERIC_WL33CCVXX_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) + # GENERIC_WL54CCUX # ----------------------------------------------------------------------------- @@ -113208,6 +114070,88 @@ target_compile_options(NUCLEO_WBA55CG_xusb_HSFS INTERFACE "SHELL:-DUSE_USB_HS -DUSE_USB_HS_IN_FS" ) +# NUCLEO_WL33CC1 +# ----------------------------------------------------------------------------- + +set(NUCLEO_WL33CC1_VARIANT_PATH "${CMAKE_CURRENT_LIST_DIR}/../variants/STM32WL3x/WL33C(8-B-C)Vx(X)") +set(NUCLEO_WL33CC1_MAXSIZE 262144) +set(NUCLEO_WL33CC1_MAXDATASIZE 32768) +set(NUCLEO_WL33CC1_MCU cortex-m0plus) +set(NUCLEO_WL33CC1_FPCONF "-") +add_library(NUCLEO_WL33CC1 INTERFACE) +target_compile_options(NUCLEO_WL33CC1 INTERFACE + "SHELL:-DSTM32WL3xx -D__CORTEX_SC=0" + "SHELL:" + "SHELL:" + "SHELL: " + -mcpu=${NUCLEO_WL33CC1_MCU} +) +target_compile_definitions(NUCLEO_WL33CC1 INTERFACE + "STM32WL3x" + "ARDUINO_NUCLEO_WL33CC1" + "BOARD_NAME=\"NUCLEO_WL33CC1\"" + "BOARD_ID=NUCLEO_WL33CC1" + "VARIANT_H=\"variant_NUCLEO_WL33CC1.h\"" +) +target_include_directories(NUCLEO_WL33CC1 INTERFACE + ${CMAKE_CURRENT_LIST_DIR}/../system/STM32WL3x + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Inc + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/STM32WL3x_HAL_Driver/Src + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/ + ${CMAKE_CURRENT_LIST_DIR}/../system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/ + ${NUCLEO_WL33CC1_VARIANT_PATH} +) + +target_link_options(NUCLEO_WL33CC1 INTERFACE + "LINKER:--default-script=${NUCLEO_WL33CC1_VARIANT_PATH}/ldscript.ld" + "LINKER:--defsym=LD_FLASH_OFFSET=0x0" + "LINKER:--defsym=LD_MAX_SIZE=262144" + "LINKER:--defsym=LD_MAX_DATA_SIZE=32768" + "SHELL: " + -mcpu=${NUCLEO_WL33CC1_MCU} +) + +add_library(NUCLEO_WL33CC1_serial_disabled INTERFACE) +target_compile_options(NUCLEO_WL33CC1_serial_disabled INTERFACE + "SHELL:" +) +add_library(NUCLEO_WL33CC1_serial_generic INTERFACE) +target_compile_options(NUCLEO_WL33CC1_serial_generic INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED" +) +add_library(NUCLEO_WL33CC1_serial_none INTERFACE) +target_compile_options(NUCLEO_WL33CC1_serial_none INTERFACE + "SHELL:-DHAL_UART_MODULE_ENABLED -DHWSERIAL_NONE" +) +add_library(NUCLEO_WL33CC1_usb_CDC INTERFACE) +target_compile_options(NUCLEO_WL33CC1_usb_CDC INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DDISABLE_GENERIC_SERIALUSB" +) +add_library(NUCLEO_WL33CC1_usb_CDCgen INTERFACE) +target_compile_options(NUCLEO_WL33CC1_usb_CDCgen INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC" +) +add_library(NUCLEO_WL33CC1_usb_HID INTERFACE) +target_compile_options(NUCLEO_WL33CC1_usb_HID INTERFACE + "SHELL:-DUSBCON -DUSBD_VID=0x0483 -DUSBD_PID=0x5740 -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_HID_COMPOSITE" +) +add_library(NUCLEO_WL33CC1_usb_none INTERFACE) +target_compile_options(NUCLEO_WL33CC1_usb_none INTERFACE + "SHELL:" +) +add_library(NUCLEO_WL33CC1_xusb_FS INTERFACE) +target_compile_options(NUCLEO_WL33CC1_xusb_FS INTERFACE + "SHELL:" +) +add_library(NUCLEO_WL33CC1_xusb_HS INTERFACE) +target_compile_options(NUCLEO_WL33CC1_xusb_HS INTERFACE + "SHELL:-DUSE_USB_HS" +) +add_library(NUCLEO_WL33CC1_xusb_HSFS INTERFACE) +target_compile_options(NUCLEO_WL33CC1_xusb_HSFS INTERFACE + "SHELL:-DUSE_USB_HS -DUSE_USB_HS_IN_FS" +) + # NUCLEO_WL55JC1 # ----------------------------------------------------------------------------- diff --git a/cores/arduino/stm32/stm32_def_build.h b/cores/arduino/stm32/stm32_def_build.h index ef044ca832..84d3554da5 100644 --- a/cores/arduino/stm32/stm32_def_build.h +++ b/cores/arduino/stm32/stm32_def_build.h @@ -518,6 +518,8 @@ #define CMSIS_STARTUP_FILE "startup_stm32wb55xx_cm4.s" #elif defined(STM32WB5Mxx) #define CMSIS_STARTUP_FILE "startup_stm32wb5mxx_cm4.s" + #elif defined(STM32WL3xx) + #define CMSIS_STARTUP_FILE "startup_stm32wl3xx.s" #elif defined(STM32WL54xx) && defined(USE_CM0PLUS_STARTUP_FILE) #define CMSIS_STARTUP_FILE "startup_stm32wl54xx_cm0plus.s" #elif defined(STM32WL54xx) && defined(USE_CM4_STARTUP_FILE) diff --git a/libraries/EEPROM/src/utility/stm32_eeprom.c b/libraries/EEPROM/src/utility/stm32_eeprom.c index 1c26d1600b..755ad0ad5d 100644 --- a/libraries/EEPROM/src/utility/stm32_eeprom.c +++ b/libraries/EEPROM/src/utility/stm32_eeprom.c @@ -265,8 +265,9 @@ void eeprom_buffer_flush(void) EraseInitStruct.PageAddress = FLASH_BASE_ADDRESS; #endif EraseInitStruct.NbPages = 1; -#if !defined(PROT_LEVEL_NONE) +#if !defined(PROT_LEVEL_NONE) && !defined(STM32WL3x) if (HAL_FLASH_Unlock() == HAL_OK) + /* TODO: else HAL_FLASHEx_PageProtection? */ #endif { __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS); @@ -303,9 +304,9 @@ void eeprom_buffer_flush(void) } } } -#if !defined(PROT_LEVEL_NONE) +#if !defined(PROT_LEVEL_NONE) && !defined(STM32WL3x) HAL_FLASH_Lock(); -#endif /* FLASH_KEY1 || FLASH_PEKEY1 */ +#endif } #else /* FLASH_TYPEERASE_SECTORS */ uint32_t SectorError = 0; diff --git a/libraries/IWatchdog/src/IWatchdog.cpp b/libraries/IWatchdog/src/IWatchdog.cpp index 7351deba35..2968844e60 100644 --- a/libraries/IWatchdog/src/IWatchdog.cpp +++ b/libraries/IWatchdog/src/IWatchdog.cpp @@ -180,7 +180,7 @@ bool IWatchdogClass::isReset(bool clear) { #if defined(IWDG1) bool status = LL_RCC_IsActiveFlag_IWDG1RST(); -#elif defined(STM32WB0x) +#elif defined(STM32WB0x) || defined(STM32WL3x) bool status = LL_RCC_IsActiveFlag_WDGRST(); #else bool status = LL_RCC_IsActiveFlag_IWDGRST(); diff --git a/libraries/SPI/src/utility/spi_com.c b/libraries/SPI/src/utility/spi_com.c index 3fc4d6ef76..58da63ee02 100644 --- a/libraries/SPI/src/utility/spi_com.c +++ b/libraries/SPI/src/utility/spi_com.c @@ -29,8 +29,9 @@ extern "C" { uint32_t spi_getClkFreqInst(SPI_TypeDef *spi_inst) { uint32_t spi_freq = SystemCoreClock; -#if defined(STM32WB0x) +#if defined(STM32WB0x) || defined(STM32WL3x) (void)spi_inst; // Avoid unused parameter warning + spi_freq = SystemCoreClock / 4; #else if (spi_inst != NP) { #if defined(STM32C0xx) || defined(STM32F0xx) || defined(STM32G0xx) || \ diff --git a/libraries/SrcWrapper/CMakeLists.txt b/libraries/SrcWrapper/CMakeLists.txt index b1ab237e09..ea4dacda44 100644 --- a/libraries/SrcWrapper/CMakeLists.txt +++ b/libraries/SrcWrapper/CMakeLists.txt @@ -80,6 +80,7 @@ add_library(SrcWrapper_bin OBJECT EXCLUDE_FROM_ALL src/HAL/stm32yyxx_hal_iwdg.c src/HAL/stm32yyxx_hal_jpeg.c src/HAL/stm32yyxx_hal_lcd.c + src/HAL/stm32yyxx_hal_lpawur.c src/HAL/stm32yyxx_hal_lptim.c src/HAL/stm32yyxx_hal_ltdc.c src/HAL/stm32yyxx_hal_ltdc_ex.c @@ -88,6 +89,8 @@ add_library(SrcWrapper_bin OBJECT EXCLUDE_FROM_ALL src/HAL/stm32yyxx_hal_mdma.c src/HAL/stm32yyxx_hal_mmc.c src/HAL/stm32yyxx_hal_mmc_ex.c + src/HAL/stm32yyxx_hal_mrsubg.c + src/HAL/stm32yyxx_hal_mrsubg_timer.c src/HAL/stm32yyxx_hal_nand.c src/HAL/stm32yyxx_hal_nor.c src/HAL/stm32yyxx_hal_opamp.c @@ -160,6 +163,7 @@ add_library(SrcWrapper_bin OBJECT EXCLUDE_FROM_ALL src/LL/stm32yyxx_ll_i2c.c src/LL/stm32yyxx_ll_i3c.c src/LL/stm32yyxx_ll_icache.c + src/LL/stm32yyxx_ll_lcsc.c src/LL/stm32yyxx_ll_lpgpio.c src/LL/stm32yyxx_ll_lptim.c src/LL/stm32yyxx_ll_lpuart.c diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll.h index aafced07af..da0ba55042 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll.h @@ -37,10 +37,14 @@ #include "stm32yyxx_ll_icache.h" #include "stm32yyxx_ll_ipcc.h" #include "stm32yyxx_ll_iwdg.h" +#include "stm32yyxx_ll_lcsc.h" +#include "stm32yyxx_ll_lpawur.h" #include "stm32yyxx_ll_lpgpio.h" #include "stm32yyxx_ll_lptim.h" #include "stm32yyxx_ll_lpuart.h" #include "stm32yyxx_ll_mdma.h" +#include "stm32yyxx_ll_mrsubg.h" +#include "stm32yyxx_ll_mrsubg_timer.h" #include "stm32yyxx_ll_opamp.h" #include "stm32yyxx_ll_pka.h" #include "stm32yyxx_ll_pwr.h" diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_adc.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_adc.h index f5d0b14996..42ea7d18ec 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_adc.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_adc.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_adc.h" #elif STM32WLxx #include "stm32wlxx_ll_adc.h" +#elif STM32WL3x + #include "stm32wl3x_ll_adc.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_ADC_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_bus.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_bus.h index 9a3aa4007f..f8d0641690 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_bus.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_bus.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_bus.h" #elif STM32WLxx #include "stm32wlxx_ll_bus.h" +#elif STM32WL3x + #include "stm32wl3x_ll_bus.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_BUS_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_comp.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_comp.h index f9a97cdce2..d65e144376 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_comp.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_comp.h @@ -40,6 +40,8 @@ #include "stm32wbaxx_ll_comp.h" #elif STM32WLxx #include "stm32wlxx_ll_comp.h" +#elif STM32WL3x + #include "stm32wl3x_ll_comp.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_COMP_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_cortex.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_cortex.h index baa033f29b..3ec27ebcd2 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_cortex.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_cortex.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_cortex.h" #elif STM32WLxx #include "stm32wlxx_ll_cortex.h" +#elif STM32WL3x + #include "stm32wl3x_ll_cortex.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_CORTEX_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_crc.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_crc.h index 3e5dc3a451..2682fdefa1 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_crc.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_crc.h @@ -52,6 +52,8 @@ #include "stm32wbaxx_ll_crc.h" #elif STM32WLxx #include "stm32wlxx_ll_crc.h" +#elif STM32WL3x + #include "stm32wl3x_ll_crc.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_CRC_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dac.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dac.h index ef0f921d37..57368f1f55 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dac.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dac.h @@ -44,6 +44,8 @@ #include "stm32u5xx_ll_dac.h" #elif STM32WLxx #include "stm32wlxx_ll_dac.h" +#elif STM32WL3x + #include "stm32wl3x_ll_dac.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_DAC_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dma.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dma.h index 9e7790b1da..e67dd70811 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dma.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dma.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_dma.h" #elif STM32WLxx #include "stm32wlxx_ll_dma.h" +#elif STM32WL3x + #include "stm32wl3x_ll_dma.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_DMA_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dmamux.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dmamux.h index 2cef22496d..6521d96b42 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dmamux.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_dmamux.h @@ -30,6 +30,8 @@ #include "stm32wb0x_ll_dmamux.h" #elif STM32WLxx #include "stm32wlxx_ll_dmamux.h" +#elif STM32WL3x + #include "stm32wl3x_ll_dmamux.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_DMAMUX_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_gpio.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_gpio.h index 0adb4d45a9..4091089b0f 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_gpio.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_gpio.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_gpio.h" #elif STM32WLxx #include "stm32wlxx_ll_gpio.h" +#elif STM32WL3x + #include "stm32wl3x_ll_gpio.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_GPIO_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_i2c.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_i2c.h index fb231bdc95..21cca702b7 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_i2c.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_i2c.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_i2c.h" #elif STM32WLxx #include "stm32wlxx_ll_i2c.h" +#elif STM32WL3x + #include "stm32wl3x_ll_i2c.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_I2C_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_iwdg.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_iwdg.h index 287be5e777..f00c148b86 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_iwdg.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_iwdg.h @@ -52,6 +52,8 @@ #include "stm32wbaxx_ll_iwdg.h" #elif STM32WLxx #include "stm32wlxx_ll_iwdg.h" +#elif STM32WL3x + #include "stm32wl3x_ll_iwdg.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_IWDG_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_lcsc.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_lcsc.h new file mode 100644 index 0000000000..d3b36d1cda --- /dev/null +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_lcsc.h @@ -0,0 +1,15 @@ +#ifndef _STM32YYXX_LL_LCSC_H_ +#define _STM32YYXX_LL_LCSC_H_ +/* LL raised several warnings, ignore them */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" +#pragma GCC diagnostic ignored "-Wstrict-aliasing" +#ifdef __cplusplus + #pragma GCC diagnostic ignored "-Wregister" +#endif + +#ifdef STM32WL3x + #include "stm32wl3x_ll_lcsc.h" +#endif +#pragma GCC diagnostic pop +#endif /* _STM32YYXX_LL_LCSC_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_lpawur.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_lpawur.h new file mode 100644 index 0000000000..30f2763d5e --- /dev/null +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_lpawur.h @@ -0,0 +1,15 @@ +#ifndef _STM32YYXX_LL_LPAWUR_H_ +#define _STM32YYXX_LL_LPAWUR_H_ +/* LL raised several warnings, ignore them */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" +#pragma GCC diagnostic ignored "-Wstrict-aliasing" +#ifdef __cplusplus + #pragma GCC diagnostic ignored "-Wregister" +#endif + +#ifdef STM32WL3x + #include "stm32wl3x_ll_lpawur.h" +#endif +#pragma GCC diagnostic pop +#endif /* _STM32YYXX_LL_LPAWUR_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_lpuart.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_lpuart.h index b41d89210d..36bae145b4 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_lpuart.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_lpuart.h @@ -36,6 +36,8 @@ #include "stm32wbaxx_ll_lpuart.h" #elif STM32WLxx #include "stm32wlxx_ll_lpuart.h" +#elif STM32WL3x + #include "stm32wl3x_ll_lpuart.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_LPUART_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_mrsubg.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_mrsubg.h new file mode 100644 index 0000000000..6b7c095028 --- /dev/null +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_mrsubg.h @@ -0,0 +1,15 @@ +#ifndef _STM32YYXX_LL_MRSUBG_H_ +#define _STM32YYXX_LL_MRSUBG_H_ +/* LL raised several warnings, ignore them */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" +#pragma GCC diagnostic ignored "-Wstrict-aliasing" +#ifdef __cplusplus + #pragma GCC diagnostic ignored "-Wregister" +#endif + +#ifdef STM32WL3x + #include "stm32wl3x_ll_mrsubg.h" +#endif +#pragma GCC diagnostic pop +#endif /* _STM32YYXX_LL_MRSUBG_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_mrsubg_timer.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_mrsubg_timer.h new file mode 100644 index 0000000000..7491d7c161 --- /dev/null +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_mrsubg_timer.h @@ -0,0 +1,15 @@ +#ifndef _STM32YYXX_LL_MRSUBG_TIMER_H_ +#define _STM32YYXX_LL_MRSUBG_TIMER_H_ +/* LL raised several warnings, ignore them */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" +#pragma GCC diagnostic ignored "-Wstrict-aliasing" +#ifdef __cplusplus + #pragma GCC diagnostic ignored "-Wregister" +#endif + +#ifdef STM32WL3x + #include "stm32wl3x_ll_mrsubg_timer.h" +#endif +#pragma GCC diagnostic pop +#endif /* _STM32YYXX_LL_MRSUBG_TIMER_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_pwr.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_pwr.h index 53adf05edf..7497fee559 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_pwr.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_pwr.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_pwr.h" #elif STM32WLxx #include "stm32wlxx_ll_pwr.h" +#elif STM32WL3x + #include "stm32wl3x_ll_pwr.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_PWR_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rcc.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rcc.h index e5a7fdc5d3..76da68c77f 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rcc.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rcc.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_rcc.h" #elif STM32WLxx #include "stm32wlxx_ll_rcc.h" +#elif STM32WL3x + #include "stm32wl3x_ll_rcc.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_RCC_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rng.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rng.h index beb5a749b8..2ec687c69b 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rng.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rng.h @@ -42,6 +42,8 @@ #include "stm32wbaxx_ll_rng.h" #elif STM32WLxx #include "stm32wlxx_ll_rng.h" +#elif STM32WL3x + #include "stm32wl3x_ll_rng.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_RNG_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rtc.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rtc.h index 80a1d71cfa..c98336ddee 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rtc.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_rtc.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_rtc.h" #elif STM32WLxx #include "stm32wlxx_ll_rtc.h" +#elif STM32WL3x + #include "stm32wl3x_ll_rtc.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_RTC_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_spi.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_spi.h index d6fe1411ba..3c8c43f07a 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_spi.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_spi.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_spi.h" #elif STM32WLxx #include "stm32wlxx_ll_spi.h" +#elif STM32WL3x + #include "stm32wl3x_ll_spi.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_SPI_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_system.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_system.h index 78b7e0aab8..3b71e3c082 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_system.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_system.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_system.h" #elif STM32WLxx #include "stm32wlxx_ll_system.h" +#elif STM32WL3x + #include "stm32wl3x_ll_system.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_SYSTEM_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_tim.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_tim.h index 074ba40b7b..55fd9924cc 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_tim.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_tim.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_tim.h" #elif STM32WLxx #include "stm32wlxx_ll_tim.h" +#elif STM32WL3x + #include "stm32wl3x_ll_tim.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_TIM_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_usart.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_usart.h index 870bef4fa6..4982dd5faa 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_usart.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_usart.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_usart.h" #elif STM32WLxx #include "stm32wlxx_ll_usart.h" +#elif STM32WL3x + #include "stm32wl3x_ll_usart.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_USART_H_ */ diff --git a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_utils.h b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_utils.h index 515c4827ac..f75f9f96fb 100644 --- a/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_utils.h +++ b/libraries/SrcWrapper/inc/LL/stm32yyxx_ll_utils.h @@ -54,6 +54,8 @@ #include "stm32wbaxx_ll_utils.h" #elif STM32WLxx #include "stm32wlxx_ll_utils.h" +#elif STM32WL3x + #include "stm32wl3x_ll_utils.h" #endif #pragma GCC diagnostic pop #endif /* _STM32YYXX_LL_UTILS_H_ */ diff --git a/libraries/SrcWrapper/inc/stm32_def.h b/libraries/SrcWrapper/inc/stm32_def.h index ad34a8c847..4890cc3b84 100644 --- a/libraries/SrcWrapper/inc/stm32_def.h +++ b/libraries/SrcWrapper/inc/stm32_def.h @@ -64,6 +64,8 @@ #include "stm32wbxx.h" #elif defined(STM32WBAxx) #include "stm32wbaxx.h" +#elif defined(STM32WL3x) + #include "stm32wl3x.h" #elif defined(STM32WLxx) #include "stm32wlxx.h" #else diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal.c index a74f6a4e5d..7fe8ee664d 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal.c @@ -52,5 +52,7 @@ #include "stm32wbaxx_hal.c" #elif STM32WLxx #include "stm32wlxx_hal.c" +#elif STM32WL3x + #include "stm32wl3x_hal.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc.c index 56b3e1771f..fdbc8577c8 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_adc.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_adc.c" #elif STM32WLxx #include "stm32wlxx_hal_adc.c" +#elif STM32WL3x + #include "stm32wl3x_hal_adc.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_comp.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_comp.c index 7122dac222..16a9351af8 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_comp.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_comp.c @@ -34,5 +34,7 @@ #include "stm32wbaxx_hal_comp.c" #elif STM32WLxx #include "stm32wlxx_hal_comp.c" +#elif STM32WL3x + #include "stm32wl3x_hal_comp.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cortex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cortex.c index 3fbe9116d1..1123b90339 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cortex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cortex.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_cortex.c" #elif STM32WLxx #include "stm32wlxx_hal_cortex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_cortex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc.c index af8450a6f0..5c05b31859 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_crc.c" #elif STM32WLxx #include "stm32wlxx_hal_crc.c" +#elif STM32WL3x + #include "stm32wl3x_hal_crc.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc_ex.c index fcbef4c773..ac35096a51 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_crc_ex.c @@ -40,5 +40,7 @@ #include "stm32wbaxx_hal_crc_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_crc_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_crc_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cryp.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cryp.c index a444fc0a32..a2ce1877f2 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cryp.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cryp.c @@ -38,5 +38,7 @@ #include "stm32wbaxx_hal_cryp.c" #elif STM32WLxx #include "stm32wlxx_hal_cryp.c" +#elif STM32WL3x + #include "stm32wl3x_hal_cryp.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cryp_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cryp_ex.c index 136ed44bf1..90f7d130eb 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cryp_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_cryp_ex.c @@ -36,5 +36,7 @@ #include "stm32wbaxx_hal_cryp_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_cryp_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_cryp_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dac.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dac.c index b1007e8347..c974411a98 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dac.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dac.c @@ -40,5 +40,7 @@ #include "stm32u5xx_hal_dac.c" #elif STM32WLxx #include "stm32wlxx_hal_dac.c" +#elif STM32WL3x + #include "stm32wl3x_hal_dac.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dac_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dac_ex.c index 30c7b6c1e0..d0f6f96df5 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dac_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dac_ex.c @@ -40,5 +40,7 @@ #include "stm32u5xx_hal_dac_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_dac_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_dac_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma.c index abae861864..84ee04d2f1 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_dma.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_dma.c" #elif STM32WLxx #include "stm32wlxx_hal_dma.c" +#elif STM32WL3x + #include "stm32wl3x_hal_dma.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash.c index 1fb6939cdb..4aa59d41b7 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash.c @@ -46,5 +46,7 @@ #include "stm32wbaxx_hal_flash.c" #elif STM32WLxx #include "stm32wlxx_hal_flash.c" +#elif STM32WL3x + #include "stm32wl3x_hal_flash.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash_ex.c index 41d00166e3..a7975f49be 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_flash_ex.c @@ -46,5 +46,7 @@ #include "stm32wbaxx_hal_flash_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_flash_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_flash_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_gpio.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_gpio.c index 6a852e8f53..65c745ba0a 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_gpio.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_gpio.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_gpio.c" #elif STM32WLxx #include "stm32wlxx_hal_gpio.c" +#elif STM32WL3x + #include "stm32wl3x_hal_gpio.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c.c index 7c82a3e913..86ceb664d0 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_i2c.c" #elif STM32WLxx #include "stm32wlxx_hal_i2c.c" +#elif STM32WL3x + #include "stm32wl3x_hal_i2c.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c_ex.c index 4603cab322..bf01bcb44a 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2c_ex.c @@ -42,5 +42,7 @@ #include "stm32wbaxx_hal_i2c_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_i2c_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_i2c_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2s.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2s.c index 32d5f7e8e0..edd771efb7 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2s.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_i2s.c @@ -32,5 +32,7 @@ #include "stm32wb0x_hal_i2s.c" #elif STM32WLxx #include "stm32wlxx_hal_i2s.c" +#elif STM32WL3x + #include "stm32wl3x_hal_i2s.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_irda.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_irda.c index c4a66e19ed..b91abe17cb 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_irda.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_irda.c @@ -46,5 +46,7 @@ #include "stm32wbaxx_hal_irda.c" #elif STM32WLxx #include "stm32wlxx_hal_irda.c" +#elif STM32WL3x + #include "stm32wl3x_hal_irda.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_iwdg.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_iwdg.c index 879329769f..43dde13f6b 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_iwdg.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_iwdg.c @@ -46,5 +46,7 @@ #include "stm32wbaxx_hal_iwdg.c" #elif STM32WLxx #include "stm32wlxx_hal_iwdg.c" +#elif STM32WL3x + #include "stm32wl3x_hal_iwdg.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_lcd.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_lcd.c index 2f48bd72d8..34dc969921 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_lcd.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_lcd.c @@ -12,5 +12,7 @@ #include "stm32u0xx_hal_lcd.c" #elif STM32WBxx #include "stm32wbxx_hal_lcd.c" +#elif STM32WL3x + #include "stm32wl3x_hal_lcd.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_lpawur.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_lpawur.c new file mode 100644 index 0000000000..b7403567bd --- /dev/null +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_lpawur.c @@ -0,0 +1,8 @@ +/* HAL raised several warnings, ignore them */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" + +#ifdef STM32WL3x + #include "stm32wl3x_hal_lpawur.c" +#endif +#pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_mrsubg.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_mrsubg.c new file mode 100644 index 0000000000..d2b4a8398b --- /dev/null +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_mrsubg.c @@ -0,0 +1,8 @@ +/* HAL raised several warnings, ignore them */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" + +#ifdef STM32WL3x + #include "stm32wl3x_hal_mrsubg.c" +#endif +#pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_mrsubg_timer.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_mrsubg_timer.c new file mode 100644 index 0000000000..ae7098cd5a --- /dev/null +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_mrsubg_timer.c @@ -0,0 +1,8 @@ +/* HAL raised several warnings, ignore them */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" + +#ifdef STM32WL3x + #include "stm32wl3x_hal_mrsubg_timer.c" +#endif +#pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr.c index c95b5e4f3f..7ceda97c6a 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_pwr.c" #elif STM32WLxx #include "stm32wlxx_hal_pwr.c" +#elif STM32WL3x + #include "stm32wl3x_hal_pwr.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr_ex.c index 07c296b167..21d4214d0c 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_pwr_ex.c @@ -46,5 +46,7 @@ #include "stm32wbaxx_hal_pwr_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_pwr_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_pwr_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc.c index ca1cce8a18..bcfcc12566 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_rcc.c" #elif STM32WLxx #include "stm32wlxx_hal_rcc.c" +#elif STM32WL3x + #include "stm32wl3x_hal_rcc.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc_ex.c index c610421e8f..8897cb47ba 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rcc_ex.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_rcc_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_rcc_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_rcc_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rng.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rng.c index 5b3dbb5b7e..cd5871929c 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rng.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rng.c @@ -38,5 +38,7 @@ #include "stm32wbaxx_hal_rng.c" #elif STM32WLxx #include "stm32wlxx_hal_rng.c" +#elif STM32WL3x + #include "stm32wl3x_hal_rng.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc.c index c8d5205f97..b0e0d84f0b 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_rtc.c" #elif STM32WLxx #include "stm32wlxx_hal_rtc.c" +#elif STM32WL3x + #include "stm32wl3x_hal_rtc.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc_ex.c index 14aeabb53d..5c9c549e34 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_rtc_ex.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_rtc_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_rtc_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_rtc_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard.c index 5e705f55ed..0f9b8774f7 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_smartcard.c" #elif STM32WLxx #include "stm32wlxx_hal_smartcard.c" +#elif STM32WL3x + #include "stm32wl3x_hal_smartcard.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard_ex.c index cc803f2d22..101c060e23 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smartcard_ex.c @@ -40,5 +40,7 @@ #include "stm32wbaxx_hal_smartcard_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_smartcard_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_smartcard_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus.c index b9f5c6bf28..92b386514a 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus.c @@ -42,5 +42,7 @@ #include "stm32wbaxx_hal_smbus.c" #elif STM32WLxx #include "stm32wlxx_hal_smbus.c" +#elif STM32WL3x + #include "stm32wl3x_hal_smbus.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus_ex.c index e9b4ffbe1c..16b396019c 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_smbus_ex.c @@ -32,5 +32,7 @@ #include "stm32wbaxx_hal_smbus_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_smbus_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_smbus_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi.c index ea979c0e51..32e26f3855 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_spi.c" #elif STM32WLxx #include "stm32wlxx_hal_spi.c" +#elif STM32WL3x + #include "stm32wl3x_hal_spi.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi_ex.c index d237ea6173..c73c522ab1 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_spi_ex.c @@ -38,5 +38,7 @@ #include "stm32wbaxx_hal_spi_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_spi_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_spi_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim.c index 29e226289e..16642e5d39 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_tim.c" #elif STM32WLxx #include "stm32wlxx_hal_tim.c" +#elif STM32WL3x + #include "stm32wl3x_hal_tim.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim_ex.c index 503ac3a9bd..421414a0ea 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_tim_ex.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_tim_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_tim_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_tim_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart.c index 1ff1b18ca4..bf975c9cfa 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_uart.c" #elif STM32WLxx #include "stm32wlxx_hal_uart.c" +#elif STM32WL3x + #include "stm32wl3x_hal_uart.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart_ex.c index d1d21c32ac..eb76a018ab 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_uart_ex.c @@ -40,5 +40,7 @@ #include "stm32wbaxx_hal_uart_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_uart_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_uart_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart.c index ffc548a8a7..90d1d9f7c2 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_hal_usart.c" #elif STM32WLxx #include "stm32wlxx_hal_usart.c" +#elif STM32WL3x + #include "stm32wl3x_hal_usart.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart_ex.c b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart_ex.c index f887f1c98e..1a700fd384 100644 --- a/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart_ex.c +++ b/libraries/SrcWrapper/src/HAL/stm32yyxx_hal_usart_ex.c @@ -36,5 +36,7 @@ #include "stm32wbaxx_hal_usart_ex.c" #elif STM32WLxx #include "stm32wlxx_hal_usart_ex.c" +#elif STM32WL3x + #include "stm32wl3x_hal_usart_ex.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/HardwareTimer.cpp b/libraries/SrcWrapper/src/HardwareTimer.cpp index 552b8f78df..35fed3f7b4 100644 --- a/libraries/SrcWrapper/src/HardwareTimer.cpp +++ b/libraries/SrcWrapper/src/HardwareTimer.cpp @@ -281,16 +281,20 @@ uint32_t HardwareTimer::getLLChannel(uint32_t channel) case 1: ll_channel = LL_TIM_CHANNEL_CH1N; break; +#if defined(TIM_CCER_CC2NE) #if defined(LL_TIM_CHANNEL_CH2N) case 2: ll_channel = LL_TIM_CHANNEL_CH2N; break; #endif +#endif +#if defined(TIM_CCER_CC3NE) #if defined(LL_TIM_CHANNEL_CH3N) case 3: ll_channel = LL_TIM_CHANNEL_CH3N; break; #endif +#endif #if defined(LL_TIM_CHANNEL_CH4N) case 4: ll_channel = LL_TIM_CHANNEL_CH4N; @@ -1347,7 +1351,7 @@ uint32_t HardwareTimer::getTimerClkFreq() uint8_t timerClkSrc = getTimerClkSrc(_timerObj.handle.Instance); uint64_t clkSelection = timerClkSrc == 1 ? RCC_PERIPHCLK_TIMG1 : RCC_PERIPHCLK_TIMG2; return HAL_RCCEx_GetPeriphCLKFreq(clkSelection); -#elif defined(STM32WB0x) +#elif defined(STM32WB0x) || defined(STM32WL3x) return SystemCoreClock; #else RCC_ClkInitTypeDef clkconfig = {}; diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_adc.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_adc.c index 3b2a03899b..cedcf42f83 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_adc.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_adc.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_adc.c" #elif STM32WLxx #include "stm32wlxx_ll_adc.c" +#elif STM32WL3x + #include "stm32wl3x_ll_adc.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_comp.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_comp.c index c0896e5c29..19da985976 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_comp.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_comp.c @@ -34,5 +34,7 @@ #include "stm32wbaxx_ll_comp.c" #elif STM32WLxx #include "stm32wlxx_ll_comp.c" +#elif STM32WL3x + #include "stm32wl3x_ll_comp.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_crc.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_crc.c index 7c6e744c95..23728654ff 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_crc.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_crc.c @@ -46,5 +46,7 @@ #include "stm32wbaxx_ll_crc.c" #elif STM32WLxx #include "stm32wlxx_ll_crc.c" +#elif STM32WL3x + #include "stm32wl3x_ll_crc.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dac.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dac.c index 871641da7f..9da5894ac3 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dac.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dac.c @@ -38,5 +38,7 @@ #include "stm32u5xx_ll_dac.c" #elif STM32WLxx #include "stm32wlxx_ll_dac.c" +#elif STM32WL3x + #include "stm32wl3x_ll_dac.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dma.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dma.c index a4e20870af..c26e5eaa47 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dma.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_dma.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_dma.c" #elif STM32WLxx #include "stm32wlxx_ll_dma.c" +#elif STM32WL3x + #include "stm32wl3x_ll_dma.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_gpio.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_gpio.c index c85aecc17e..3ce93a645f 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_gpio.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_gpio.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_gpio.c" #elif STM32WLxx #include "stm32wlxx_ll_gpio.c" +#elif STM32WL3x + #include "stm32wl3x_ll_gpio.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_i2c.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_i2c.c index 8a6e9c5a7d..13571e2e6d 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_i2c.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_i2c.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_i2c.c" #elif STM32WLxx #include "stm32wlxx_ll_i2c.c" +#elif STM32WL3x + #include "stm32wl3x_ll_i2c.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_lcsc.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_lcsc.c new file mode 100644 index 0000000000..abf3e2796b --- /dev/null +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_lcsc.c @@ -0,0 +1,8 @@ +/* LL raised several warnings, ignore them */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" + +#ifdef STM32WL3x + #include "stm32wl3x_ll_lcsc.c" +#endif +#pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_lpuart.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_lpuart.c index eb47270483..9daa960f61 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_lpuart.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_lpuart.c @@ -30,5 +30,7 @@ #include "stm32wbaxx_ll_lpuart.c" #elif STM32WLxx #include "stm32wlxx_ll_lpuart.c" +#elif STM32WL3x + #include "stm32wl3x_ll_lpuart.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_pwr.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_pwr.c index ee1de61649..2e520ed345 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_pwr.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_pwr.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_pwr.c" #elif STM32WLxx #include "stm32wlxx_ll_pwr.c" +#elif STM32WL3x + #include "stm32wl3x_ll_pwr.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rcc.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rcc.c index 0f46b1d9d2..d054c74b9c 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rcc.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rcc.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_rcc.c" #elif STM32WLxx #include "stm32wlxx_ll_rcc.c" +#elif STM32WL3x + #include "stm32wl3x_ll_rcc.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rng.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rng.c index a7ad1ac92c..8a21e704d0 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rng.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rng.c @@ -36,5 +36,7 @@ #include "stm32wbaxx_ll_rng.c" #elif STM32WLxx #include "stm32wlxx_ll_rng.c" +#elif STM32WL3x + #include "stm32wl3x_ll_rng.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rtc.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rtc.c index 573f24849c..44a5d66275 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rtc.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_rtc.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_rtc.c" #elif STM32WLxx #include "stm32wlxx_ll_rtc.c" +#elif STM32WL3x + #include "stm32wl3x_ll_rtc.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_spi.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_spi.c index 2029508a21..801f235a32 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_spi.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_spi.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_spi.c" #elif STM32WLxx #include "stm32wlxx_ll_spi.c" +#elif STM32WL3x + #include "stm32wl3x_ll_spi.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_system.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_system.c index 8e7fed5fc4..bab6f73882 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_system.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_system.c @@ -4,5 +4,7 @@ #ifdef STM32WB0x #include "stm32wb0x_ll_system.c" +#elif STM32WL3x + #include "stm32wl3x_ll_system.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_tim.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_tim.c index 99079ee822..685b2b49b5 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_tim.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_tim.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_tim.c" #elif STM32WLxx #include "stm32wlxx_ll_tim.c" +#elif STM32WL3x + #include "stm32wl3x_ll_tim.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_usart.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_usart.c index 7a9d6a0e91..df93b37dbf 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_usart.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_usart.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_usart.c" #elif STM32WLxx #include "stm32wlxx_ll_usart.c" +#elif STM32WL3x + #include "stm32wl3x_ll_usart.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_utils.c b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_utils.c index fdd3fbedbd..8666f91831 100644 --- a/libraries/SrcWrapper/src/LL/stm32yyxx_ll_utils.c +++ b/libraries/SrcWrapper/src/LL/stm32yyxx_ll_utils.c @@ -48,5 +48,7 @@ #include "stm32wbaxx_ll_utils.c" #elif STM32WLxx #include "stm32wlxx_ll_utils.c" +#elif STM32WL3x + #include "stm32wl3x_ll_utils.c" #endif #pragma GCC diagnostic pop diff --git a/libraries/SrcWrapper/src/stm32/analog.cpp b/libraries/SrcWrapper/src/stm32/analog.cpp index 0d34a4f4d3..98c17eafd3 100644 --- a/libraries/SrcWrapper/src/stm32/analog.cpp +++ b/libraries/SrcWrapper/src/stm32/analog.cpp @@ -30,7 +30,7 @@ static PinName g_current_pin = NC; /* Private_Defines */ #if defined(HAL_ADC_MODULE_ENABLED) && !defined(HAL_ADC_MODULE_ONLY) -#if defined(STM32WB0x) +#if defined(STM32WB0x) || defined(STM32WL3x) #ifndef ADC_SAMPLING_RATE #define ADC_SAMPLING_RATE ADC_SAMPLE_RATE_16 #endif /* !ADC_SAMPLING_RATE */ @@ -117,7 +117,7 @@ static PinName g_current_pin = NC; #ifndef ADC_REGULAR_RANK_1 #define ADC_REGULAR_RANK_1 1 #endif -#endif /* STM32WB0x */ +#endif /* STM32WB0x || STM32WL3x */ /* Exported Functions */ /** @@ -474,7 +474,11 @@ void dac_write_value(PinName pin, uint32_t value, uint8_t do_init) } /*##-3- Set DAC Channel1 DHR register ######################################*/ +#if defined(DAC_ALIGN_12B_R) if (HAL_DAC_SetValue(&DacHandle, dacChannel, DAC_ALIGN_12B_R, value) != HAL_OK) { +#else + if (HAL_DAC_SetValue(&DacHandle, dacChannel, DAC_ALIGN_6B_R, value) != HAL_OK) { +#endif /* Setting value Error */ return; } @@ -843,12 +847,12 @@ uint16_t adc_read_value(PinName pin, uint32_t resolution) ADC_HandleTypeDef AdcHandle = {}; ADC_ChannelConfTypeDef AdcChannelConf = {}; __IO uint16_t uhADCxConvertedValue = 0; -#if defined(STM32WB0x) +#if defined(STM32WB0x) || defined(STM32WL3x) uint32_t samplingRate = ADC_SAMPLING_RATE; uint32_t voltageRange = ADC_VOLT_RANGE; #else uint32_t samplingTime = ADC_SAMPLINGTIME; -#endif /* STM32WB0x */ +#endif /* STM32WB0x || STM32WL3x */ uint32_t channel = 0; uint32_t bank = 0; @@ -870,7 +874,7 @@ uint16_t adc_read_value(PinName pin, uint32_t resolution) #endif #endif channel = get_adc_internal_channel(pin); -#if defined(STM32WB0x) +#if defined(STM32WB0x) || defined(STM32WL3x) samplingRate = ADC_SAMPLING_RATE_INTERNAL; if (channel == ADC_CHANNEL_TEMPSENSOR) { voltageRange = ADC_VIN_RANGE_1V2; @@ -879,13 +883,11 @@ uint16_t adc_read_value(PinName pin, uint32_t resolution) } #else samplingTime = ADC_SAMPLINGTIME_INTERNAL; -#endif /* STM32WB0x */ +#endif /* STM32WB0x || STM32WL3x */ } else { AdcHandle.Instance = (ADC_TypeDef *)pinmap_peripheral(pin, PinMap_ADC); channel = get_adc_channel(pin, &bank); -#if defined(STM32WB0x) - -#else +#if !defined(STM32WB0x) && !defined(STM32WL3x) #if defined(ADC_VER_V5_V90) if (AdcHandle.Instance == ADC3) { samplingTime = ADC3_SAMPLINGTIME; @@ -896,14 +898,16 @@ uint16_t adc_read_value(PinName pin, uint32_t resolution) samplingTime = ADC4_SAMPLINGTIME; } #endif -#endif /* STM32WB0x */ +#endif /* !STM32WB0x && !STM32WL3x */ } if (AdcHandle.Instance == NP) { return 0; } -#if defined(STM32WB0x) +#if defined(STM32WB0x) || defined(STM32WL3x) +#if defined(ADC_CONVERSION_WITH_DS) AdcHandle.Init.ConversionType = ADC_CONVERSION_WITH_DS; +#endif /* ADC_CONVERSION_WITH_DS */ AdcHandle.Init.ContinuousConvMode = DISABLE; AdcHandle.Init.SequenceLength = 1; AdcHandle.Init.SamplingMode = ADC_SAMPLING_AT_START; @@ -1047,7 +1051,7 @@ uint16_t adc_read_value(PinName pin, uint32_t resolution) #ifdef ADC_VREF_PPROT_NONE AdcHandle.Init.VrefProtection = ADC_VREF_PPROT_NONE; #endif -#endif /* STM32WB0x*/ +#endif /* STM32WB0x || STM32WL3x */ AdcHandle.State = HAL_ADC_STATE_RESET; AdcHandle.DMA_Handle = NULL; AdcHandle.Lock = HAL_UNLOCKED; @@ -1070,7 +1074,7 @@ uint16_t adc_read_value(PinName pin, uint32_t resolution) return 0; } -#if defined(STM32WB0x) +#if defined(STM32WB0x) || defined(STM32WL3x) AdcChannelConf.Rank = ADC_RANK_1; AdcChannelConf.VoltRange = voltageRange; AdcChannelConf.CalibrationPoint.Number = ADC_CALIB_POINT_1; @@ -1138,7 +1142,7 @@ uint16_t adc_read_value(PinName pin, uint32_t resolution) AdcChannelConf.OffsetRightShift = DISABLE; /* No Right Offset Shift */ AdcChannelConf.OffsetSignedSaturation = DISABLE; /* Signed saturation feature is not used */ #endif -#endif /* STM32WB0x */ +#endif /* STM32WB0x || STM32WL3x */ /*##-2- Configure ADC regular channel ######################################*/ if (HAL_ADC_ConfigChannel(&AdcHandle, &AdcChannelConf) != HAL_OK) { /* Channel Configuration Error */ diff --git a/libraries/SrcWrapper/src/stm32/clock.c b/libraries/SrcWrapper/src/stm32/clock.c index 6c12eccea5..2498583348 100644 --- a/libraries/SrcWrapper/src/stm32/clock.c +++ b/libraries/SrcWrapper/src/stm32/clock.c @@ -130,7 +130,7 @@ void enableClock(sourceClock_t source) if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) { RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; RCC_OscInitStruct.HSIState = RCC_HSI_ON; -#if !defined(STM32WB0x) +#if !defined(STM32WB0x) && !defined(STM32WL3x) #if defined(STM32MP1xx) RCC_OscInitStruct.HSICalibrationValue = 0x00; #else diff --git a/libraries/SrcWrapper/src/stm32/interrupt.cpp b/libraries/SrcWrapper/src/stm32/interrupt.cpp index 2872941994..31bc13771d 100644 --- a/libraries/SrcWrapper/src/stm32/interrupt.cpp +++ b/libraries/SrcWrapper/src/stm32/interrupt.cpp @@ -43,7 +43,7 @@ #if !defined(HAL_EXTI_MODULE_DISABLED) /* Private Types */ -#if defined(STM32WB0x) +#if defined(STM32WB0x) || defined(STM32WL3x) static std::function gpio_callback[2][16] = { { NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, @@ -129,7 +129,7 @@ static const uint32_t ll_exti_lines[NB_EXTI] = { LL_EXTI_LINE_8, LL_EXTI_LINE_9, LL_EXTI_LINE_10, LL_EXTI_LINE_11, LL_EXTI_LINE_12, LL_EXTI_LINE_13, LL_EXTI_LINE_14, LL_EXTI_LINE_15 }; -#endif /* STM32WB0x */ +#endif /* STM32WB0x || STM32WL3x */ /* Private Functions */ /** * @brief This function returns the pin ID function of the HAL PIN definition @@ -165,7 +165,7 @@ void stm32_interrupt_enable(PinName pn, callback_function_t callback, uint32_t m hsem_unlock(CFG_HW_GPIO_SEMID); } IRQn_Type irqnb; -#ifdef STM32WB0x +#if defined(STM32WB0x) || defined(STM32WL3x) if (port == GPIOA) { irqnb = GPIOA_IRQn; gpio_callback[0][id] = callback; @@ -176,7 +176,7 @@ void stm32_interrupt_enable(PinName pn, callback_function_t callback, uint32_t m #else gpio_irq_conf[id].callback = callback; irqnb = gpio_irq_conf[id].irqnb; -#endif /* STM32WB0x */ +#endif /* STM32WB0x || */ // Enable and set EXTI Interrupt HAL_NVIC_SetPriority(irqnb, EXTI_IRQ_PRIO, EXTI_IRQ_SUBPRIO); HAL_NVIC_EnableIRQ(irqnb); @@ -208,7 +208,7 @@ void stm32_interrupt_disable(GPIO_TypeDef *port, uint16_t pin) { UNUSED(port); uint8_t id = get_pin_id(pin); -#ifdef STM32WB0x +#if defined(STM32WB0x) || defined(STM32WL3x) uint8_t pid = 0; IRQn_Type irqnb; if (port == GPIOA) { @@ -236,11 +236,11 @@ void stm32_interrupt_disable(GPIO_TypeDef *port, uint16_t pin) } LL_EXTI_DisableIT_0_31(ll_exti_lines[id]); HAL_NVIC_DisableIRQ(gpio_irq_conf[id].irqnb); -#endif /* STM32WB0x */ +#endif /* STM32WB0x || STM32WL3x */ } -#if defined(STM32WB0x) +#if defined(STM32WB0x) || defined(STM32WL3x) #ifdef __cplusplus extern "C" { #endif @@ -560,7 +560,7 @@ void EXTI15_IRQHandler(void) #ifdef __cplusplus } #endif -#endif /* !STM32WB0x */ +#endif /* STM32WB0x || STM32WL3x */ #endif /* !HAL_EXTI_MODULE_DISABLED */ #endif diff --git a/libraries/SrcWrapper/src/stm32/system_stm32yyxx.c b/libraries/SrcWrapper/src/stm32/system_stm32yyxx.c index 79425e068a..570b3417e2 100644 --- a/libraries/SrcWrapper/src/stm32/system_stm32yyxx.c +++ b/libraries/SrcWrapper/src/stm32/system_stm32yyxx.c @@ -42,6 +42,8 @@ #include "system_stm32wbaxx.c" #elif STM32WBxx #include "system_stm32wbxx.c" +#elif STM32WL3x + #include "system_stm32wl3x.c" #elif STM32WLxx #include "system_stm32wlxx.c" #endif diff --git a/libraries/SrcWrapper/src/stm32/uart.c b/libraries/SrcWrapper/src/stm32/uart.c index fa1789dd78..27ffd9fbee 100644 --- a/libraries/SrcWrapper/src/stm32/uart.c +++ b/libraries/SrcWrapper/src/stm32/uart.c @@ -1478,14 +1478,14 @@ uint32_t uart_compute_prescaler(UART_HandleTypeDef *huart) uint32_t uart_get_clock_source_freq(UART_HandleTypeDef *huart) { uint32_t freq = 0; -#if defined(STM32WB0) +#if defined(STM32WB0x) || defined(STM32WL3x) freq = UART_PERIPHCLK; if (UART_INSTANCE_LOWPOWER(huart)) { #if defined(RCC_CFGR_LPUCLKSEL) freq = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_LPUART1); #endif /* RCC_CFGR_LPUCLKSEL */ } -#else /* !STM32WB0 */ +#else /* STM32WB0x || STM32WL3x */ uint32_t clocksource; UART_GETCLOCKSOURCE(huart, clocksource); #if defined(STM32H5) || defined(STM32MP1) || defined(STM32U0) ||\ @@ -1560,7 +1560,7 @@ uint32_t uart_get_clock_source_freq(UART_HandleTypeDef *huart) break; } #endif /* STM32H5 */ -#endif /* STM32WB0 */ +#endif /* STM32WB0x || STM32WL3x */ return freq; } #endif /* UART_PRESCALER_DIV1 */ diff --git a/libraries/Wire/src/utility/twi.c b/libraries/Wire/src/utility/twi.c index 001b3f4642..c097892803 100644 --- a/libraries/Wire/src/utility/twi.c +++ b/libraries/Wire/src/utility/twi.c @@ -193,9 +193,9 @@ static I2C_HandleTypeDef *i2c_handles[I2C_NUM]; static uint32_t i2c_getClkFreq(I2C_TypeDef *i2c) { uint32_t clkSrcFreq = 0; -#if defined(STM32WB0x) +#if defined(STM32WB0x) || defined(STM32WL3x) (void)i2c; // Avoid unused parameter warning - clkSrcFreq = SystemCoreClock; + clkSrcFreq = SystemCoreClock / 4; #else #ifdef STM32H7xx PLL3_ClocksTypeDef PLL3_Clocks; @@ -515,7 +515,7 @@ static uint32_t i2c_getClkFreq(I2C_TypeDef *i2c) } } #endif // I2C6_BASE -#endif /* STM32WB0x */ +#endif /* STM32WB0x || STM32WL3x */ return clkSrcFreq; } @@ -759,7 +759,8 @@ void i2c_init(i2c_t *obj, uint32_t timing, uint32_t ownAddress) obj->irq = I2C1_EV_IRQn; #if !defined(STM32C0xx) && !defined(STM32F0xx) && !defined(STM32G0xx) && \ - !defined(STM32L0xx) && !defined(STM32U0xx) && !defined(STM32WB0x) + !defined(STM32L0xx) && !defined(STM32U0xx) && !defined(STM32WB0x) && \ + !defined(STM32WL3x) obj->irqER = I2C1_ER_IRQn; #endif /* !STM32C0xx && !STM32F0xx && !STM32G0xx && !STM32L0xx && !STM32U0xx */ i2c_handles[I2C1_INDEX] = handle; @@ -773,7 +774,8 @@ void i2c_init(i2c_t *obj, uint32_t timing, uint32_t ownAddress) __HAL_RCC_I2C2_RELEASE_RESET(); obj->irq = I2C2_EV_IRQn; #if !defined(STM32C0xx) && !defined(STM32F0xx) && !defined(STM32G0xx) && \ - !defined(STM32L0xx) && !defined(STM32U0xx) + !defined(STM32L0xx) && !defined(STM32U0xx) && !defined(STM32WB0x) && \ + !defined(STM32WL3x) obj->irqER = I2C2_ER_IRQn; #endif /* !STM32F0xx && !STM32G0xx && !STM32L0xx && !STM32U0xx */ i2c_handles[I2C2_INDEX] = handle; diff --git a/libraries/Wire/src/utility/twi.h b/libraries/Wire/src/utility/twi.h index 672ae02b38..22420ea4b7 100644 --- a/libraries/Wire/src/utility/twi.h +++ b/libraries/Wire/src/utility/twi.h @@ -69,7 +69,8 @@ extern "C" { /* Redefinition of IRQ for C0/F0/G0/L0/U0 families */ #if defined(STM32C0xx) || defined(STM32F0xx) || defined(STM32G0xx) ||\ - defined(STM32L0xx) || defined(STM32U0xx) || defined(STM32WB0x) + defined(STM32L0xx) || defined(STM32U0xx) || defined(STM32WB0x) || \ + defined(STM32WL3x) #if defined(I2C1_BASE) #define I2C1_EV_IRQn I2C1_IRQn #define I2C1_EV_IRQHandler I2C1_IRQHandler diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/stm32wl3x.h b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/stm32wl3x.h new file mode 100644 index 0000000000..279b943469 --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/stm32wl3x.h @@ -0,0 +1,298 @@ +/** + ****************************************************************************** + * @file stm32wl3x.h + * @author MCD Application Team + * @brief CMSIS STM32WL3x Device Peripheral Access Layer Header File. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The STM32WBxx device used in the target application + * - To use or not the peripheral's drivers in application code(i.e. + * code will be based on direct access to peripheral's registers + * rather than drivers API), this option is controlled by + * "#define USE_HAL_DRIVER" + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32wl3x + * @{ + */ + +#ifndef STM32WL3x_H +#define STM32WL3x_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32WL3) +#define STM32WL3 +#endif /* STM32WL3 */ + +/** Uncomment the line below according to the target STM32WL3 device used in your application. + * stm32wl3xx.h file contains: + * - All the peripheral register's definitions, bits definitions and memory mapping for STM32WL3xx devices + * - IRQ channel definition + * - Peripheral memory mapping and physical registers address definition + * - Peripheral pointer declaration and driver header file inclusion + * - Product miscellaneous configuration: assert macros, … + * Note: These CMSIS drivers (stm32wl3xx.h) are always supporting features of the sub-family's superset. + */ +#if !defined (STM32WL3XX) + /* #define STM32WL3XX */ /*!< STM32WL30x, STM32WL31x and STM32WL33x Devices */ +#endif /* STM32WL3XX */ + +/* Legacy aliases */ +#if defined (STM32WL33) + #define STM32WL3XX +#endif /* STM32WL33 */ + + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number + */ +#define __STM32WL3x_CMSIS_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32WL3x_CMSIS_VERSION_SUB1 (0x02U) /*!< [23:16] sub1 version */ +#define __STM32WL3x_CMSIS_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ +#define __STM32WL3x_CMSIS_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32WL3x_CMSIS_VERSION ((__STM32WL3x_CMSIS_VERSION_MAIN << 24U)\ + |(__STM32WL3x_CMSIS_VERSION_SUB1 << 16U)\ + |(__STM32WL3x_CMSIS_VERSION_SUB2 << 8U )\ + |(__STM32WL3x_CMSIS_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ +/* Fix issue with case sensitive definition in stm32wl3x.h */ +#if defined(STM32WL3xx) + #define STM32WL3XX +#endif +#if defined(STM32WL3XX) + #include "stm32wl3xx.h" +#else + #error "Please select first the target STM32WL3xx device used in your application (in stm32wl3x.h file)" +#endif /* STM32WL3XX */ + +/** + * @} + */ + +/** @addtogroup Exported types + * @{ + */ + +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; + +typedef enum +{ + SUCCESS = 0, + ERROR = !SUCCESS +} ErrorStatus; + +typedef uint8_t BOOL; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ + +/**@brief Macro that checks if STATE is a FlagStatus / ITStatus */ +#define IS_FLAGSTATUS(STATE) (((STATE) == RESET) || ((STATE) == SET)) +#define IS_ITSTATUS(STATE) IS_FLAGSTATUS(STATE) + +/** @brief Macro that checks if STATE is a FunctionalState */ +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +/** @brief Macro that returns a 16-bit value from a buffer where the value is stored in Little Endian Format */ +#define LE_TO_HOST_16(ptr) (uint16_t) ( ((uint16_t)*((uint8_t *)(ptr))) | \ + ((uint16_t)*((uint8_t *)(ptr) + 1) << 8) ) + +/** @brief Macro that returns a 16-bit value from a buffer where the value is stored in Big Endian Format */ +#define BE_TO_HOST_16(ptr) (uint16_t) ( ((uint16_t) *((uint8_t *)ptr)) << 8 | \ + ((uint16_t) *((uint8_t *)ptr + 1) ) ) + +/** @brief Macro that stores a 16-bit value into a buffer in Little Endian Format (2 bytes) */ +#define HOST_TO_LE_16(buf, val) ( ((buf)[0] = (uint8_t) (val) ) , \ + ((buf)[1] = (uint8_t) ((val)>>8) ) ) + +/** @brief Macro that returns a 32-bit value from a buffer where the value is stored in Little Endian Format */ +#define LE_TO_HOST_32(ptr) (uint32_t) ( ((uint32_t)*((uint8_t *)(ptr))) | \ + ((uint32_t)*((uint8_t *)(ptr) + 1) << 8) | \ + ((uint32_t)*((uint8_t *)(ptr) + 2) << 16) | \ + ((uint32_t)*((uint8_t *)(ptr) + 3) << 24) ) + +/** @brief Macro that returns a 16-bit value from a buffer where the value is stored in Big Endian Format */ +#define BE_TO_HOST_32(ptr) (uint32_t) ( ((uint32_t) *((uint8_t *)ptr )) << 24 | \ + ((uint32_t) *((uint8_t *)ptr + 1)) << 16 | \ + ((uint32_t) *((uint8_t *)ptr + 2)) << 8 | \ + ((uint32_t) *((uint8_t *)ptr + 3)) ) + +/** @brief Macro that stores a 32-bit value into a buffer in Little Endian Format (4 bytes) */ +#define HOST_TO_LE_32(buf, val) ( ((buf)[0] = (uint8_t) (val) ) , \ + ((buf)[1] = (uint8_t) ((val)>>8) ) , \ + ((buf)[2] = (uint8_t) ((val)>>16) ) , \ + ((buf)[3] = (uint8_t) ((val)>>24) ) ) + +/** @brief Macro that returns a 64-bit value from a buffer where the value is stored in Little Endian Format */ +#define LE_TO_HOST_64(ptr) (uint64_t) ( ((uint64_t)*((uint8_t *)(ptr))) | \ + ((uint64_t)*((uint8_t *)(ptr) + 1) << 8) | \ + ((uint64_t)*((uint8_t *)(ptr) + 2) << 16) | \ + ((uint64_t)*((uint8_t *)(ptr) + 3) << 24) | \ + ((uint64_t)*((uint8_t *)(ptr) + 4) << 32) | \ + ((uint64_t)*((uint8_t *)(ptr) + 5) << 40) | \ + ((uint64_t)*((uint8_t *)(ptr) + 6) << 48) | \ + ((uint64_t)*((uint8_t *)(ptr) + 7) << 56) ) + +/** @brief Macro that stores a 64-bit value into a buffer in Little Endian Format (8 bytes) */ +#define HOST_TO_LE_64(buf, val) ( ((buf)[0] = (uint8_t) (val) ) , \ + ((buf)[1] = (uint8_t) ((val)>>8) ) , \ + ((buf)[2] = (uint8_t) ((val)>>16) ) , \ + ((buf)[3] = (uint8_t) ((val)>>24) ) , \ + ((buf)[4] = (uint8_t) ((val)>>32) ) , \ + ((buf)[5] = (uint8_t) ((val)>>40) ) , \ + ((buf)[6] = (uint8_t) ((val)>>48) ) , \ + ((buf)[7] = (uint8_t) ((val)>>56) ) ) + +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) (REG) + +#define TOGGLE_BIT(REG, BIT) ((REG) ^= (BIT)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), ((READ_REG(REG) & (~(CLEARMASK))) | (SETMASK))) + +#define MODIFY_REG_FIELD(REG, FIELD_NAME, VAL) MODIFY_REG(REG, FIELD_NAME##_Msk, ((VAL)<<(FIELD_NAME##_Pos))&(FIELD_NAME##_Msk)) + +#define READ_REG_FIELD(REG, FIELD) ((REG & FIELD)>>FIELD##_Pos) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + +/* Use of interrupt control for register exclusive access (privileged mode only) */ +/* Atomic 32-bit register access macro to set one or several bits */ +#define ATOMIC_SET_BIT(REG, BIT) \ + do { \ + uint32_t primask; \ + primask = __get_PRIMASK(); \ + __set_PRIMASK(1); \ + SET_BIT((REG), (BIT)); \ + __set_PRIMASK(primask); \ + } while(0) + +/* Atomic 32-bit register access macro to clear one or several bits */ +#define ATOMIC_CLEAR_BIT(REG, BIT) \ + do { \ + uint32_t primask; \ + primask = __get_PRIMASK(); \ + __set_PRIMASK(1); \ + CLEAR_BIT((REG), (BIT)); \ + __set_PRIMASK(primask); \ + } while(0) + +/* Atomic 32-bit register access macro to clear and set one or several bits */ +#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \ + do { \ + uint32_t primask; \ + primask = __get_PRIMASK(); \ + __set_PRIMASK(1); \ + MODIFY_REG((REG), (CLEARMSK), (SETMASK)); \ + __set_PRIMASK(primask); \ + } while(0) + +/* Atomic 16-bit register access macro to set one or several bits */ +#define ATOMIC_SETH_BIT(REG, BIT) ATOMIC_SET_BIT(REG, BIT) + +/* Atomic 16-bit register access macro to clear one or several bits */ +#define ATOMIC_CLEARH_BIT(REG, BIT) ATOMIC_CLEAR_BIT(REG, BIT) + +/* Atomic 16-bit register access macro to clear and set one or several bits */ +#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) + +/** + * @} + */ + +/**@brief TRUE, FALSE definition */ +#ifndef TRUE +#define TRUE ((BOOL)1U) +#endif +#ifndef FALSE +#define FALSE ((BOOL)0U) +#endif + +#if defined (USE_HAL_DRIVER) + #include "stm32wl3x_hal.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32WL3x_H */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/stm32wl3xx.h b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/stm32wl3xx.h new file mode 100644 index 0000000000..1776cf0696 --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Include/stm32wl3xx.h @@ -0,0 +1,12863 @@ +/** + ****************************************************************************** + * @file stm32wl3xx.h + * @author MCD Application Team + * @brief CMSIS Cortex Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for stm32wl33 devices. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripheral's registers hardware + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +#ifndef STM32WL3XX_H +#define STM32WL3XX_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/** @addtogroup ST + * @{ + */ + + +/** @addtogroup STM32WL3x + * @{ + */ + + + + +/** @addtogroup Configuration_of_CMSIS + * @{ + */ + + +/* =========================================================================================================================== */ +/* ================ Interrupt Number Definition ================ */ +/* =========================================================================================================================== */ + +typedef enum { +/* ======================================= ARM Cortex-M0+ Specific Interrupt Numbers ======================================= */ + Reset_IRQn = -15, /*!< -15 Reset Vector, invoked on Power up and warm reset */ + NonMaskableInt_IRQn = -14, /*!< -14 Non maskable Interrupt, cannot be stopped or preempted */ + HardFault_IRQn = -13, /*!< -13 Hard Fault, all classes of Fault */ + SVCall_IRQn = -5, /*!< -5 System Service Call via SVC instruction */ + PendSV_IRQn = -2, /*!< -2 Pendable request for system service */ + SysTick_IRQn = -1, /*!< -1 System Tick Timer */ +/* ======================================== STM32WL3x Specific Interrupt Numbers =========================================== */ + FLASH_IRQn = 0, /*!< 0 NVM interrupt */ + RCC_IRQn = 1, /*!< 1 RCC interrupt */ + PVD_IRQn = 2, /*!< 2 PVD interrupt */ + I2C1_IRQn = 3, /*!< 3 I2C1 interrupt */ + I2C2_IRQn = 4, /*!< 4 I2C2 interrupt */ + SPI1_IRQn = 5, /*!< 5 SPI1 interrupt */ + SPI3_IRQn = 7, /*!< 7 SPI3 interrupt */ + USART1_IRQn = 8, /*!< 8 USART interrupt */ + LPUART1_IRQn = 9, /*!< 9 Low Power UART interrupt */ + TIM2_IRQn = 10, /*!< 10 Timer 2 interrupt */ + RTC_IRQn = 11, /*!< 11 RTC interrupt */ + ADC_IRQn = 12, /*!< 12 ADC interrupt */ + AES_IRQn = 13, /*!< 13 AES interrupt */ + GPIOA_IRQn = 15, /*!< 15 GPIOA interrupt */ + GPIOB_IRQn = 16, /*!< 16 GPIOB interrupt */ + DMA_IRQn = 17, /*!< 17 DMA interrupt */ + LPAWUR_IRQn = 18, /*!< 18 LPAWUR interrupt */ + COMP1_IRQn = 19, /*!< 19 Comp interrupt through SYSCFGBLE */ + MRSUBG_BUSY_IRQn = 20, /*!< 20 MR_SUBG Busy interrupt */ + MRSUBG_IRQn = 21, /*!< 21 MR_SUBG interrupt */ + MRSUBG_TX_RX_SEQUENCE_IRQn = 22, /*!< 22 MR_SUBG TX/RX Sequence interrupt */ + MRSUBG_TIMER_CPU_WKUP_IRQn = 23, /*!< 23 CPU Wakeup interrupt */ + MRSUBG_WKUP_IRQn = 24, /*!< 24 SUBG Wakeup interrupt */ + DAC_IRQn = 25, /*!< 25 DAC interrupt */ + TIM16_IRQn = 26, /*!< 26 TIM16 interrupt */ + LCD_IRQn = 27, /*!< 27 LCD interrupt */ + LCSC_IRQn = 28, /*!< 28 LCSC interrupt */ + LCSC_LC_ACTIVITY_IRQn = 29 /*!< 28 LCSC LC activity interrupt */ +} IRQn_Type; + + + +/* =========================================================================================================================== */ +/* ================ Processor and Core Peripheral Section ================ */ +/* =========================================================================================================================== */ + +/* ========================== Configuration of the ARM Cortex-M0+ Processor and Core Peripherals =========================== */ +/** @addtogroup Configuration_of_CMSIS + * @{ + */ +/** + * @brief Configuration of the Cortex-M0+ Processor and Core Peripherals + */ + +#define __CM0PLUS_REV 1 /*!< CM0PLUS Core Revision r0p1 */ +#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +#define __VTOR_PRESENT 1 /*!< Vector Table Offset Register supported */ +#define __MPU_PRESENT 1 /*!< M0+ provides an MPU */ +#define __FPU_PRESENT 0 /*!< FPU not present */ +/** + * @} + */ + + + /*!< Device Electronic Signature */ +#define PACKAGE_BASE ((uint32_t)0x40001014U) /*!< Package size data register base address */ +#define UID64_BASE ((uint32_t)0x10001EF0U) /*!< 64-bit Unique device Identification */ +#define FLASHSIZE_BASE ((uint32_t)0x40001014U) /*!< Flash size data register base address */ +#define RAMSIZE_BASE ((uint32_t)0x40001014U) /*!< RAM size data register base address */ +#define DEV_ID_BASE ((uint32_t)0x40000000U) /*!< Device version and cut version register base address */ + + + +/** @} */ /* End of group Configuration_of_CMSIS */ + +#include "core_cm0plus.h" /*!< ARM Cortex-M0+ processor and core peripherals */ +#include "system_stm32wl3x.h" /*!< system_stm32wl3x macros and typedefs System util */ + + + +/* ======================================== Start of section using anonymous unions ======================================== */ +#if defined (__CC_ARM) + #pragma push + #pragma anon_unions +#elif defined (__ICCARM__) + #pragma language=extended +#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wc11-extensions" + #pragma clang diagnostic ignored "-Wreserved-id-macro" + #pragma clang diagnostic ignored "-Wgnu-anonymous-struct" + #pragma clang diagnostic ignored "-Wnested-anon-types" +#elif defined (__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined (__TMS470__) + /* anonymous unions are enabled by default */ +#elif defined (__TASKING__) + #pragma warning 586 +#elif defined (__CSMC__) + /* anonymous unions are enabled by default */ +#else + #warning Not supported compiler type +#endif + + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Section ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup Device_Peripheral_peripherals + * @{ + */ + + + +/* =========================================================================================================================== */ +/* ================ DMA ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Direct memory access controller (DMA) + */ + +typedef struct { /*!< DMA Structure */ + __IO uint32_t ISR; /*!< (@ 0x00000000) Interrupt status register */ + __IO uint32_t IFCR; /*!< (@ 0x00000004) Interrupt flag clear register */ +} DMA_TypeDef; + +typedef struct { + __IO uint32_t CCR; /*!< DMA channel x configuration register */ + __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ + __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ + __IO uint32_t CMAR; /*!< DMA channel x memory address register */ + __IO uint32_t RESERVED; +} DMA_Channel_TypeDef; + + + + +/* =========================================================================================================================== */ +/* ================ DMAMUX ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Direct memory access Multiplexer (DMAMUX) + */ + +/** + * @brief DMA Multiplexer + */ +typedef struct { /*!< DMAMUX Structure */ + __IO uint32_t CxCR; /*!< DMA Multiplexer Channel x Control Register Address offset: 0x0004 * (channel x) */ +} DMAMUX_Channel_TypeDef; + + +/* =========================================================================================================================== */ +/* ================ CRC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Cyclic redundancy check calculation unit (CRC) + */ + +typedef struct { /*!< CRC Structure */ + __IO uint32_t DR; /*!< (@ 0x00000000) Data register */ + __IO uint32_t IDR; /*!< (@ 0x00000004) Independent data register */ + __IO uint32_t CR; /*!< (@ 0x00000008) Control register */ + __IO uint32_t RESERVED; + __IO uint32_t INIT; /*!< (@ 0x00000010) Initial CRC value */ + __IO uint32_t POL; /*!< (@ 0x00000014) Polynomial */ +} CRC_TypeDef; /*!< Size = 24 (0x18) */ + + + +/* =========================================================================================================================== */ +/* ================ IWDG ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Independent watchdog (IWDG) + */ + +typedef struct { /*!< IWDG Structure */ + __IO uint32_t KR; /*!< (@ 0x00000000) Key register */ + __IO uint32_t PR; /*!< (@ 0x00000004) Prescaler register */ + __IO uint32_t RLR; /*!< (@ 0x00000008) Reload register */ + __IO uint32_t SR; /*!< (@ 0x0000000C) Status register */ + __IO uint32_t WINR; /*!< (@ 0x00000010) Window register */ +} IWDG_TypeDef; /*!< Size = 20 (0x14) */ + + +/* =========================================================================================================================== */ +/* ================ I2C ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Inter-integrated circuit (I2C) + */ + +typedef struct { /*!< I2C1 Structure */ + __IO uint32_t CR1; /*!< (@ 0x00000000) Control register 1 */ + __IO uint32_t CR2; /*!< (@ 0x00000004) Control register 2 */ + __IO uint32_t OAR1; /*!< (@ 0x00000008) Own address register 1 */ + __IO uint32_t OAR2; /*!< (@ 0x0000000C) Own address register 2 */ + __IO uint32_t TIMINGR; /*!< (@ 0x00000010) Timing register */ + __IO uint32_t TIMEOUTR; /*!< (@ 0x00000014) Timeout register */ + __IO uint32_t ISR; /*!< (@ 0x00000018) Interrupt and Status register */ + __IO uint32_t ICR; /*!< (@ 0x0000001C) Interrupt clear register */ + __IO uint32_t PECR; /*!< (@ 0x00000020) PEC register */ + __IO uint32_t RXDR; /*!< (@ 0x00000024) Receive data register */ + __IO uint32_t TXDR; /*!< (@ 0x00000028) Transmit data register */ +} I2C_TypeDef; /*!< Size = 44 (0x2C) */ + + + +/* =========================================================================================================================== */ +/* ================ FLASH ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief FLASH (FLASH) + */ + +typedef struct { /*!< FLASH Structure */ + __IO uint32_t COMMAND; /*!< (@ 0x00000000) Command register */ + __IO uint32_t CONFIG; /*!< (@ 0x00000004) Configuration register */ + __IO uint32_t IRQSTAT; /*!< (@ 0x00000008) Interrupt status register */ + __IO uint32_t IRQMASK; /*!< (@ 0x0000000C) Interrupt mask register */ + __IO uint32_t IRQRAW; /*!< (@ 0x00000010) Intertupt raw status register */ + __IO uint32_t SIZE; /*!< (@ 0x00000014) SIZE register */ + __IO uint32_t ADDRESS; /*!< (@ 0x00000018) Address register */ + __IO uint32_t RESERVED[2]; + __IO uint32_t LFSRVAL; /*!< (@ 0x00000024) LFSRVAL register */ + __IO uint32_t RESERVED2[3]; + __IO uint32_t PAGEPROT0; /*!< (@ 0x00000034) Main Flash page protection register 0 */ + __IO uint32_t PAGEPROT1; /*!< (@ 0x00000038) Main Flash page protection register 1 */ + __IO uint32_t RESERVED1; + __IO uint32_t DATA0; /*!< (@ 0x00000040) Data register 0 */ + __IO uint32_t DATA1; /*!< (@ 0x00000044) Data register 1 */ + __IO uint32_t DATA2; /*!< (@ 0x00000048) Data register 2 */ + __IO uint32_t DATA3; /*!< (@ 0x0000004C) Data register 3 */ +} FLASH_TypeDef; /*!< Size = 80 (0x50) */ + + + +/* =========================================================================================================================== */ +/* ================ SPI ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Serial peripheral interface/Inter-IC sound (SPI) + */ + +typedef struct { /*!< SPI Structure */ + __IO uint32_t CR1; /*!< (@ 0x00000000) Control register 1 */ + __IO uint32_t CR2; /*!< (@ 0x00000004) Control register 2 */ + __IO uint32_t SR; /*!< (@ 0x00000008) Status register */ + __IO uint32_t DR; /*!< (@ 0x0000000C) Data register */ + __IO uint32_t CRCPR; /*!< (@ 0x00000010) CRC polynomial register */ + __IO uint32_t RXCRCR; /*!< (@ 0x00000014) RX CRC register */ + __IO uint32_t TXCRCR; /*!< (@ 0x00000018) TX CRC register */ + __IO uint32_t I2SCFGR; /*!< (@ 0x0000001C) I2S configuration register */ + __IO uint32_t I2SPR; /*!< (@ 0x00000020) I2S prescaler register */ +} SPI_TypeDef; /*!< Size = 36 (0x24) */ + + + +/* =========================================================================================================================== */ +/* ================ RCC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Reset and clock control (RCC) + */ + +typedef struct{ /*!< RCC Structure */ + __IO uint32_t CR; /*!< (@ 0x00000000) CR register */ + __IO uint32_t ICSCR; /*!< (@ 0x00000004) ICSCR register */ + __IO uint32_t CFGR; /*!< (@ 0x00000008) CFGR register */ + __IO uint32_t CSSWCR; /*!< (@ 0x0000000C) CSSWCR register */ + __IO uint32_t KRMR; /*!< (@ 0x00000010) KRMR register */ + __IO uint32_t RESERVED; + __IO uint32_t CIER; /*!< (@ 0x00000018) CIER register */ + __IO uint32_t CIFR; /*!< (@ 0x0000001C) CIFR register */ + __IO uint32_t CSCMDR; /*!< (@ 0x00000020) CSCMDR register */ + __IO uint32_t RESERVED1[3]; + __IO uint32_t AHBRSTR; /*!< (@ 0x00000030) AHBRSTR register */ + __IO uint32_t APB0RSTR; /*!< (@ 0x00000034) APB0RSTR register */ + __IO uint32_t APB1RSTR; /*!< (@ 0x00000038) APB1RSTR register */ + __IO uint32_t RESERVED2; + __IO uint32_t APB2RSTR; /*!< (@ 0x00000040) APB2RSTR register */ + __IO uint32_t RESERVED3[3]; + __IO uint32_t AHBENR; /*!< (@ 0x00000050) AHBENR register */ + __IO uint32_t APB0ENR; /*!< (@ 0x00000054) APB0ENR register */ + __IO uint32_t APB1ENR; /*!< (@ 0x00000058) APB1ENR register */ + __IO uint32_t RESERVED4; + __IO uint32_t APB2ENR; /*!< (@ 0x00000060) APB2ENR register */ + __IO uint32_t RESERVED5[12]; + __IO uint32_t CSR; /*!< (@ 0x00000094) CSR register */ + __IO uint32_t RFSWHSECR;/*!< (@ 0x00000098) RFSWHSECR register */ + __IO uint32_t RFHSECR; /*!< (@ 0x0000009C) RFHSECR register */ + __IO uint32_t AHBSMENR; /*!< (@ 0x000000A0) AHBSMENR register */ + __IO uint32_t APB0SMENR;/*!< (@ 0x000000A4) APB0SMENR register */ + __IO uint32_t APB1SMENR;/*!< (@ 0x000000A8) APB1SMENR register */ +} RCC_TypeDef; /*!< Size = 172 (0xAC) */ + + + +/* =========================================================================================================================== */ +/* ================ PWR ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Power control (PWR) + */ + +typedef struct{ /*!< PWR Structure */ + __IO uint32_t CR1; /*!< (@ 0x00000000) CR1 register */ + __IO uint32_t CR2; /*!< (@ 0x00000004) CR2 register */ + __IO uint32_t IEWU; /*!< (@ 0x00000008) IEWU register */ + __IO uint32_t IWUP; /*!< (@ 0x0000000C) IWUP register */ + __IO uint32_t IWUF; /*!< (@ 0x00000010) IWUF register */ + __IO uint32_t SR2; /*!< (@ 0x00000014) SR2 register */ + __IO uint32_t RESERVED; + __IO uint32_t CR5; /*!< (@ 0x0000001C) CR5 register */ + __IO uint32_t PUCRA; /*!< (@ 0x00000020) PUCRA register */ + __IO uint32_t PDCRA; /*!< (@ 0x00000024) PDCRA register */ + __IO uint32_t PUCRB; /*!< (@ 0x00000028) PUCRB register */ + __IO uint32_t PDCRB; /*!< (@ 0x0000002C) PDCRB register */ + __IO uint32_t EWUA; /*!< (@ 0x00000030) EWUA register */ + __IO uint32_t WUPA; /*!< (@ 0x00000034) WUPA register */ + __IO uint32_t WUFA; /*!< (@ 0x00000038) WUFA register */ + __IO uint32_t RESERVED1; + __IO uint32_t EWUB; /*!< (@ 0x00000040) EWUB register */ + __IO uint32_t WUPB; /*!< (@ 0x00000044) WUPB register */ + __IO uint32_t WUFB; /*!< (@ 0x00000048) WUFB register */ + __IO uint32_t SDWN_WUEN; /*!< (@ 0x0000004C) SDWN_WUEN register */ + __IO uint32_t SDWN_WUPOL;/*!< (@ 0x00000050) SDWN_WUPOL register */ + __IO uint32_t SDWN_WUF; /*!< (@ 0x00000054) SDWN_WUF register */ + __IO uint32_t BOF_TUNE; /*!< (@ 0x00000058) BOF_TUNE register */ + __IO uint32_t RESERVED2[10]; + __IO uint32_t DBGR; /*!< (@ 0x00000084) DBGR register */ + __IO uint32_t EXTSRR; /*!< (@ 0x00000088) EXTSRR register */ + __IO uint32_t RESERVED3; + __IO uint32_t TRIMR; /*!< (@ 0x00000090) TRIMR register */ + __IO uint32_t ENGTRIM; /*!< (@ 0x00000094) ENGTRIM register */ + __IO uint32_t RESERVED4[2]; + __IO uint32_t ENGTRIM2; /*!< (@ 0x000000A0) ENGTRIM register */ +} PWR_TypeDef; /*!< Size = 164 (0xA4) */ + + + +/* =========================================================================================================================== */ +/* ================ SYSCFG ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief System configuration controller (SYSCFG) + */ + +typedef struct { /*!< SYSCFG Structure */ + __IO uint32_t DIE_ID; /*!< (@ 0x00000000) Die ID register */ + __IO uint32_t JTAG_ID; /*!< (@ 0x00000004) JTAG ID register */ + __IO uint32_t I2C_FMP_CTRL; /*!< (@ 0x00000008) I2C Fast-Mode Plus pin capability control register */ + __IO uint32_t IO_DTR; /*!< (@ 0x0000000C) I/O Interrupt detection type register */ + __IO uint32_t IO_IBER; /*!< (@ 0x00000010) I/O Interrupt Edge register */ + __IO uint32_t IO_IEVR; /*!< (@ 0x00000014) I/O Interrupt polarity event register */ + __IO uint32_t IO_IER; /*!< (@ 0x00000018) I/O Interrupt Enable register */ + __IO uint32_t IO_ISCR; /*!< (@ 0x0000001C) I/O Interrupt Status and Clear register */ + __IO uint32_t PWRC_IER; /*!< (@ 0x00000020) Power Controller Interrupt Enable register */ + __IO uint32_t PWRC_ISCR; /*!< (@ 0x00000024) Power Controller Interrupt Status and Clear register */ + __IO uint32_t GPIO_SWA_CTRL; /*!< (@ 0x00000028) I/O analog switch control register */ + __IO uint32_t INTAI_DTR; /*!< (@ 0x0000002C) Internal asynchronous interrupt detection type register */ + __IO uint32_t INTAI_IBER; /*!< (@ 0x00000030) Internal asynchronous interrupt edge register */ + __IO uint32_t INTAI_IEVR; /*!< (@ 0x00000034) Internal asynchronous interrupt polarity event register */ + __IO uint32_t INTAI_IER; /*!< (@ 0x00000038) Internal asynchronous interrupt enable register */ + __IO uint32_t INTAI_ISCR; /*!< (@ 0x0000003C) Internal asynchronous interrupt detection status and clear register */ + __IO uint32_t SR1; /*!< (@ 0x00000040) SYSCFG status register 1 */ +} SYSCFG_TypeDef; /*!< Size = 68 (0x44) */ + + + +/* =========================================================================================================================== */ +/* ================ RNG ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Random number generator (RNG) + */ + +typedef struct { /*!< RNG Structure */ + __IO uint32_t CR; /*!< (@ 0x00000000) Control register */ + __IO uint32_t SR; /*!< (@ 0x00000004) Status register */ + __IO uint32_t VAL; /*!< (@ 0x00000008) Data register */ +} RNG_TypeDef; /*!< Size = 12 (0xC) */ + + + +/* =========================================================================================================================== */ +/* ================ GPIO ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief General-purpose I/Os (GPIO) + */ + +typedef struct { /*!< GPIO Structure */ + __IO uint32_t MODER; /*!< (@ 0x00000000) GPIO port mode register */ + __IO uint32_t OTYPER; /*!< (@ 0x00000004) GPIO port output type register */ + __IO uint32_t OSPEEDR; /*!< (@ 0x00000008) GPIO port output speed register */ + __IO uint32_t PUPDR; /*!< (@ 0x0000000C) GPIO port pull-up/pull-down register */ + __IO uint32_t IDR; /*!< (@ 0x00000010) GPIO port input data register */ + __IO uint32_t ODR; /*!< (@ 0x00000014) GPIO port output data register */ + __IO uint32_t BSRR; /*!< (@ 0x00000018) GPIO port bit set/reset register */ + __IO uint32_t LCKR; /*!< (@ 0x0000001C) GPIO port configuration lock register */ + __IO uint32_t AFR[2]; /*!< (@ 0x00000020) GPIO alternate function register */ + __IO uint32_t BRR; /*!< (@ 0x00000028) GPIO bit reset register */ +} GPIO_TypeDef; /*!< Size = 44 (0x2c) */ + + + +/* =========================================================================================================================== */ +/* ================ TIM ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Advanced-timers (TIM) + */ + +typedef struct { /*!< TIMx Structure */ + __IO uint32_t CR1; /*!< (@ 0x00000000) Control register 1 */ + __IO uint32_t CR2; /*!< (@ 0x00000004) Control register 2 */ + __IO uint32_t SMCR; /*!< (@ 0x00000008) Slave mode control register */ + __IO uint32_t DIER; /*!< (@ 0x0000000C) DMA/Interrupt enable register */ + __IO uint32_t SR; /*!< (@ 0x00000010) Status register */ + __IO uint32_t EGR; /*!< (@ 0x00000014) Event generation register */ + __IO uint32_t CCMR1; /*!< (@ 0x00000018) Input capture and output compare mode register 1 */ + __IO uint32_t CCMR2; /*!< (@ 0x0000001C) Input capture and output compare mode register 2 */ + __IO uint32_t CCER; /*!< (@ 0x00000020) Capture/compare enable register */ + __IO uint32_t CNT; /*!< (@ 0x00000024) Counter */ + __IO uint32_t PSC; /*!< (@ 0x00000028) Prescaler */ + __IO uint32_t ARR; /*!< (@ 0x0000002C) Auto-reload register */ + __IO uint32_t RCR; /*!< (@ 0x00000030) Repetition counter register */ + __IO uint32_t CCR1; /*!< (@ 0x00000034) Capture/compare register 1 */ + __IO uint32_t CCR2; /*!< (@ 0x00000038) Capture/compare register 2 */ + __IO uint32_t CCR3; /*!< (@ 0x0000003C) Capture/compare register 3 */ + __IO uint32_t CCR4; /*!< (@ 0x00000040) Capture/compare register 4 */ + __IO uint32_t BDTR; /*!< (@ 0x00000044) Break and dead-time register */ + __IO uint32_t DCR; /*!< (@ 0x00000048) DMA control register */ + __IO uint32_t DMAR; /*!< (@ 0x0000004C) DMA address for full transfer */ + __IO uint32_t OR; /*!< (@ 0x00000050) Option register 1 */ + __IO uint32_t RESERVED[3]; + __IO uint32_t AF1; /*!< (@ 0x00000060) TIM alternate function option register 1 */ + __IO uint32_t RESERVED1; + __IO uint32_t TISEL; /*!< (@ 0x00000068) Input selection register */ +} TIM_TypeDef; /*!< Size = 108 (0x6C) */ + + + +/* =========================================================================================================================== */ +/* ================ USART ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Universal synchronous asynchronous receiver transmitter (USART) + */ + +typedef struct { /*!< USART Structure */ + __IO uint32_t CR1; /*!< (@ 0x00000000) Control register 1 */ + __IO uint32_t CR2; /*!< (@ 0x00000004) Control register 2 */ + __IO uint32_t CR3; /*!< (@ 0x00000008) Control register 3 */ + __IO uint32_t BRR; /*!< (@ 0x0000000C) Baud rate register */ + __IO uint32_t GTPR; /*!< (@ 0x00000010) Guard time and prescaler register */ + __IO uint32_t RTOR; /*!< (@ 0x00000014) Receiver timeout register */ + __IO uint32_t RQR; /*!< (@ 0x00000018) Request register */ + __IO uint32_t ISR; /*!< (@ 0x0000001C) Interrupt & status register */ + __IO uint32_t ICR; /*!< (@ 0x00000020) Interrupt flag clear register */ + __IO uint32_t RDR; /*!< (@ 0x00000024) Receive data register */ + __IO uint32_t TDR; /*!< (@ 0x00000028) Transmit data register */ + __IO uint32_t PRESC; /*!< (@ 0x0000002C) Prescaler register */ +} USART_TypeDef; /*!< Size = 48 (0x30) */ + + + +/* =========================================================================================================================== */ +/* ================ RTC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Real-time clock (RTC) + */ + +typedef struct { /*!< RTC Structure */ + __IO uint32_t TR; /*!< (@ 0x00000000) Time register */ + __IO uint32_t DR; /*!< (@ 0x00000004) Date register */ + __IO uint32_t CR; /*!< (@ 0x00000008) Control register */ + __IO uint32_t ISR; /*!< (@ 0x0000000C) Initialization and status register */ + __IO uint32_t PRER; /*!< (@ 0x00000010) Prescaler register */ + __IO uint32_t WUTR; /*!< (@ 0x00000014) Wakeup timer register */ + __IO uint32_t RESERVED; + __IO uint32_t ALRMAR; /*!< (@ 0x0000001C) Alarm A register */ + __IO uint32_t RESERVED1; + __IO uint32_t WPR; /*!< (@ 0x00000024) Write protection register */ + __IO uint32_t SSR; /*!< (@ 0x00000028) Sub second register */ + __IO uint32_t SHIFTR; /*!< (@ 0x0000002C) Shift control register */ + __IO uint32_t TSTR; /*!< (@ 0x00000030) Timestamp time register */ + __IO uint32_t TSDR; /*!< (@ 0x00000034) Timestamp date register */ + __IO uint32_t TSSSR; /*!< (@ 0x00000038) Timestamp sub second register */ + __IO uint32_t CALR; /*!< (@ 0x0000003C) Calibration register */ + __IO uint32_t TAMPCR; /*!< (@ 0x00000040) Tamper configuration register */ + __IO uint32_t ALRMASSR; /*!< (@ 0x00000044) Alarm A sub second register */ + __IO uint32_t RESERVED2; + __IO uint32_t OR; /*!< (@ 0x0000004C) Option register */ + __IO uint32_t BKP0R; /*!< (@ 0x00000050) Backup register 0 */ + __IO uint32_t BKP1R; /*!< (@ 0x00000054) Backup register 1 */ +} RTC_TypeDef; /*!< Size = 88 (0x58) */ + + + +/* =========================================================================================================================== */ +/* ================ AES ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Advanced encryption standard hardware accelerator (AES) + */ + +typedef struct { /*!< AES Structure */ + __IO uint32_t CR; /*!< (@ 0x00000000) Control Register */ + __IO uint32_t SR; /*!< (@ 0x00000004) Status Register */ + __IO uint32_t DINR; /*!< (@ 0x00000008) Data Input register */ + __IO uint32_t DOUTR; /*!< (@ 0x0000000C) Data Output register */ + __IO uint32_t KEYR0; /*!< (@ 0x00000010) Key register 0 */ + __IO uint32_t KEYR1; /*!< (@ 0x00000014) Key register 1 */ + __IO uint32_t KEYR2; /*!< (@ 0x00000018) Key register 2 */ + __IO uint32_t KEYR3; /*!< (@ 0x0000001C) Key register 3 */ + __IO uint32_t IVR0; /*!< (@ 0x00000020) Initialization vector register 0 */ + __IO uint32_t IVR1; /*!< (@ 0x00000024) Initialization vector register 1 */ + __IO uint32_t IVR2; /*!< (@ 0x00000028) Initialization vector register 2 */ + __IO uint32_t IVR3; /*!< (@ 0x0000002C) Initialization vector register 3 */ + __IO uint32_t KEYR4; /*!< (@ 0x00000030) Key register 4 */ + __IO uint32_t KEYR5; /*!< (@ 0x00000034) Key register 5 */ + __IO uint32_t KEYR6; /*!< (@ 0x00000038) Key register 6 */ + __IO uint32_t KEYR7; /*!< (@ 0x0000003C) Key register 7 */ + __IO uint32_t SUSP0; /*!< (@ 0x00000040) Suspend register 0 */ + __IO uint32_t SUSP1; /*!< (@ 0x00000044) Suspend register 1 */ + __IO uint32_t SUSP2; /*!< (@ 0x00000048) Suspend register 2 */ + __IO uint32_t SUSP3; /*!< (@ 0x0000004C) Suspend register 3 */ + __IO uint32_t SUSP4; /*!< (@ 0x00000050) Suspend register 4 */ + __IO uint32_t SUSP5; /*!< (@ 0x00000054) Suspend register 5 */ + __IO uint32_t SUSP6; /*!< (@ 0x00000058) Suspend register 6 */ + __IO uint32_t SUSP7; /*!< (@ 0x0000005C) Suspend register 7 */ +} AES_TypeDef; /*!< Size = 96 (0x60) */ + + + +/* =========================================================================================================================== */ +/* ================ ADC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief ADC (ADC) + */ + +typedef struct { /*!< ADC Structure */ + __IO uint32_t VERSION_ID; /*!< (@ 0x00000000) VERSION_ID register */ + __IO uint32_t CONF; /*!< (@ 0x00000004) ADC configuration register */ + __IO uint32_t CTRL; /*!< (@ 0x00000008) ADC control register */ + __IO uint32_t RESERVED[2]; + __IO uint32_t SWITCH; /*!< (@ 0x00000014) ADC switch control for Input Selection */ + __IO uint32_t RESERVED1; + __IO uint32_t DS_CONF; /*!< (@ 0x0000001C) Downsampler configuration register */ + __IO uint32_t SEQ_1; /*!< (@ 0x00000020) ADC regular sequence programming register 1 */ + __IO uint32_t SEQ_2; /*!< (@ 0x00000024) ADC regular sequence programming register 2 */ + __IO uint32_t COMP_1; /*!< (@ 0x00000028) ADC Gain & offset correction values register 1 */ + __IO uint32_t COMP_2; /*!< (@ 0x0000002C) ADC Gain & offset correction values register 2 */ + __IO uint32_t COMP_3; /*!< (@ 0x00000030) ADC Gain & offset correction values register 3 */ + __IO uint32_t COMP_4; /*!< (@ 0x00000034) ADC Gain & offset correction values register 4 */ + __IO uint32_t COMP_SEL; /*!< (@ 0x00000038) ADC Gain & Offset selection values register */ + __IO uint32_t WD_TH; /*!< (@ 0x0000003C) ADC watchdog threshold register register */ + __IO uint32_t WD_CONF; /*!< (@ 0x00000040) ADC watchdog configuration register */ + __IO uint32_t DS_DATAOUT; /*!< (@ 0x00000044) Downsampler Data output register */ + __IO uint32_t RESERVED2; + __IO uint32_t IRQ_STATUS; /*!< (@ 0x0000004C) Interrupt Status register */ + __IO uint32_t IRQ_ENABLE; /*!< (@ 0x00000050) Enable/disable Interrupts */ +} ADC_TypeDef; /*!< Size = 84 (0x54) */ + + + +/* =========================================================================================================================== */ +/* ================ COMP ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Comparator (COMP) + */ + +typedef struct { /*!< COMP Structure */ + __IO uint32_t CSR; /*!< (@ 0x00000000) Control and status register */ +} COMP_TypeDef; /*!< Size = 4 (0x04) */ + + + +/* =========================================================================================================================== */ +/* ================ DAC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Digital to Analog Converter (DAC) + */ + +typedef struct { /*!< DAC Structure */ + __IO uint32_t CR; /*!< (@ 0x00000000) Control register */ + __IO uint32_t SWTRIGR; /*!< (@ 0x00000004) Software trigger register */ + __IO uint32_t RESERVED[2]; + __IO uint32_t DHR; /*!< (@ 0x00000010) Channel data holding register */ + __IO uint32_t RESERVED1[6]; + __IO uint32_t DOR; /*!< (@ 0x0000002C) Channel data output register */ + __IO uint32_t RESERVED2; + __IO uint32_t SR; /*!< (@ 0x00000034) Status register */ +} DAC_TypeDef; /*!< Size = 56 (0x38) */ + + + +/* =========================================================================================================================== */ +/* ================ LCSC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief LC Sensor Controller (LCSC) + */ + +typedef struct{ /*!< LCSC Structure */ + __IO uint32_t CR0; /*!< (@ 0x00000000) LCSC_CR0 register */ + __IO uint32_t CR1; /*!< (@ 0x00000004) LCSC_CR1 register */ + __IO uint32_t CR2; /*!< (@ 0x00000008) LCSC_CR2 register */ + __IO uint32_t PULSE_CR; /*!< (@ 0x0000000C) LCSC_PULSE_CR register */ + __IO uint32_t ENR; /*!< (@ 0x00000010) LCSC_ENR register */ + __IO uint32_t WHEEL_SR; /*!< (@ 0x00000014) LCSC_WHEEL_SR register */ + __IO uint32_t CONFR; /*!< (@ 0x00000018) LCSC_CONFR register */ + __IO uint32_t COMP_CTN; /*!< (@ 0x0000001C) LCSC_COMP_CTN register */ + __IO uint32_t SR; /*!< (@ 0x00000020) LCSC_SR register */ + __IO uint32_t STAT; /*!< (@ 0x00000024) LCSC_STAT register */ + __IO uint32_t RESERVED[6]; + __IO uint32_t VER; /*!< (@ 0x00000040) LCSC_VER register */ + __IO uint32_t ISR; /*!< (@ 0x00000044) LCSC_ISR register */ +} LCSC_TypeDef; /*!< Size = 72 (0x48) */ + + + +/* =========================================================================================================================== */ +/* ================ DBGMCU ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief MCU debug component (DBGMCU) + */ + +typedef struct{ /*!< DBGMCU Structure */ + __IO uint32_t CR; /*!< (@ 0x00000000) CR register */ + __IO uint32_t DBG_APB0_FZ; /*!< (@ 0x00000004) DBG_APB0_FZ register */ + __IO uint32_t DBG_APB1_FZ; /*!< (@ 0x00000008) DBG_APB1_FZ register */ +} DBGMCU_TypeDef; /*!< Size = 12 (0x0C) */ + + + +/* =========================================================================================================================== */ +/* ================ LCD ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Liquid crystal display controller (LCD) + */ + +typedef struct { /*!< LCD Structure */ + __IO uint32_t CR; /*!< (@ 0x00000000) Control register */ + __IO uint32_t FCR; /*!< (@ 0x00000004) Frame control register */ + __IO uint32_t SR; /*!< (@ 0x00000008) Status register */ + __IO uint32_t CLR; /*!< (@ 0x0000000C) Clear register */ + __IO uint32_t RESERVED; + __IO uint32_t RAM_COM0; /*!< (@ 0x00000014) Disaplay Memory COM 0 */ + __IO uint32_t RESERVED1; + __IO uint32_t RAM_COM1; /*!< (@ 0x0000001C) Disaplay Memory COM 1 */ + __IO uint32_t RESERVED2; + __IO uint32_t RAM_COM2; /*!< (@ 0x00000024) Disaplay Memory COM 2 */ + __IO uint32_t RESERVED3; + __IO uint32_t RAM_COM3; /*!< (@ 0x0000002C) Disaplay Memory COM 3 */ + __IO uint32_t RESERVED4; + __IO uint32_t RAM_COM4; /*!< (@ 0x00000034) Disaplay Memory COM 4 */ + __IO uint32_t RESERVED5; + __IO uint32_t RAM_COM5; /*!< (@ 0x0000003C) Disaplay Memory COM 5 */ + __IO uint32_t RESERVED6; + __IO uint32_t RAM_COM6; /*!< (@ 0x00000044) Disaplay Memory COM 6 */ + __IO uint32_t RESERVED7; + __IO uint32_t RAM_COM7; /*!< (@ 0x0000004C) Disaplay Memory COM 7 */ +} LCD_TypeDef; /*!< Size = 80 (0x50) */ + + + +/* =========================================================================================================================== */ +/* ================ MR_SUBG_RADIO ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief MR_SUBG Radio + */ + +typedef struct{ /*!< MR_SUBG_RADIO Structure */ + __IO uint32_t RF_FSM0_TIMEOUT; /*!< (@ 0x00000000) RF_FSM0_TIMEOUT register */ + __IO uint32_t RF_FSM1_TIMEOUT; /*!< (@ 0x00000004) RF_FSM1_TIMEOUT register */ + __IO uint32_t RF_FSM2_TIMEOUT; /*!< (@ 0x00000008) RF_FSM2_TIMEOUT register */ + __IO uint32_t RF_FSM3_TIMEOUT; /*!< (@ 0x0000000C) RF_FSM3_TIMEOUT register */ + __IO uint32_t RF_FSM4_TIMEOUT; /*!< (@ 0x00000010) RF_FSM4_TIMEOUT register */ + __IO uint32_t RF_FSM5_TIMEOUT; /*!< (@ 0x00000014) RF_FSM5_TIMEOUT register */ + __IO uint32_t RF_FSM6_TIMEOUT; /*!< (@ 0x00000018) RF_FSM6_TIMEOUT register */ + __IO uint32_t RF_FSM7_TIMEOUT; /*!< (@ 0x0000001C) RF_FSM7_TIMEOUT register */ + __IO uint32_t AFC0_CONFIG; /*!< (@ 0x00000020) AFC0_CONFIG register */ + __IO uint32_t AFC1_CONFIG; /*!< (@ 0x00000024) AFC1_CONFIG register */ + __IO uint32_t AFC2_CONFIG; /*!< (@ 0x00000028) AFC2_CONFIG register */ + __IO uint32_t AFC3_CONFIG; /*!< (@ 0x0000002C) AFC3_CONFIG register */ + __IO uint32_t CLKREC_CTRL0; /*!< (@ 0x00000030) CLKREC_CTRL0 register */ + __IO uint32_t CLKREC_CTRL1; /*!< (@ 0x00000034) CLKREC_CTRL1 register */ + __IO uint32_t DCREM_CTRL0; /*!< (@ 0x00000038) DCREM_CTRL0 register */ + __IO uint32_t DCREM_CTRL1; /*!< (@ 0x0000003C) DCREM_CTRL1 register */ + __IO uint32_t IQC_CTRL0; /*!< (@ 0x00000040) IQC_CTRL0 register */ + __IO uint32_t IQC_CTRL1; /*!< (@ 0x00000044) IQC_CTRL1 register */ + __IO uint32_t IQC_CTRL2; /*!< (@ 0x00000048) IQC_CTRL2 register */ + __IO uint32_t IQC_CTRL3; /*!< (@ 0x0000004C) IQC_CTRL3 register */ + __IO uint32_t RESERVED; + __IO uint32_t AGC0_CTRL; /*!< (@ 0x00000054) AGC0_CTRL register */ + __IO uint32_t AGC1_CTRL; /*!< (@ 0x00000058) AGC1_CTRL register */ + __IO uint32_t AGC2_CTRL; /*!< (@ 0x0000005C) AGC2_CTRL register */ + __IO uint32_t AGC3_CTRL; /*!< (@ 0x00000060) AGC3_CTRL register */ + __IO uint32_t AGC4_CTRL; /*!< (@ 0x00000064) AGC4_CTRL register */ + __IO uint32_t AGC_ATTEN0; /*!< (@ 0x00000068) AGC_ATTEN0 register */ + __IO uint32_t AGC_ATTEN1; /*!< (@ 0x0000006C) AGC_ATTEN1 register */ + __IO uint32_t AGC_ATTEN2; /*!< (@ 0x00000070) AGC_ATTEN2 register */ + __IO uint32_t AGC_ATTEN3; /*!< (@ 0x00000074) AGC_ATTEN3 register */ + __IO uint32_t AGC_ATTEN4; /*!< (@ 0x00000078) AGC_ATTEN4 register */ + __IO uint32_t AGC_ATTEN5; /*!< (@ 0x0000007C) AGC_ATTEN5 register */ + __IO uint32_t AGC_ATTEN6; /*!< (@ 0x00000080) AGC_ATTEN6 register */ + __IO uint32_t AGC_ATTEN7; /*!< (@ 0x00000084) AGC_ATTEN7 register */ + __IO uint32_t AGC_ATTEN8; /*!< (@ 0x00000088) AGC_ATTEN8 register */ + __IO uint32_t AGC_ATTEN9; /*!< (@ 0x0000008C) AGC_ATTEN9 register */ + __IO uint32_t AGC1_ATTEN_TRIM; /*!< (@ 0x00000090) AGC1_ATTEN_TRIM register */ + __IO uint32_t AGC2_ATTEN_TRIM; /*!< (@ 0x00000094) AGC2_ATTEN_TRIM register */ + __IO uint32_t AGC3_ATTEN_TRIM; /*!< (@ 0x00000098) AGC3_ATTEN_TRIM register */ + __IO uint32_t AGC4_ATTEN_TRIM; /*!< (@ 0x0000009C) AGC4_ATTEN_TRIM register */ + __IO uint32_t AGC_PGA_HWTRIM_OUT; /*!< (@ 0x000000A0) AGC_PGA_HWTRIM_OUT register */ + __IO uint32_t RESERVED1; + __IO uint32_t PA_REG; /*!< (@ 0x000000A8) PA_REG register */ + __IO uint32_t PA_HWTRIM_OUT; /*!< (@ 0x000000AC) PA_HWTRIM_OUT register */ + __IO uint32_t RESERVED2[3]; + __IO uint32_t RSSI_FLT; /*!< (@ 0x000000BC) RSSI_FLT register */ + __IO uint32_t RESERVED3[2]; + __IO uint32_t SYNTH2_ANA_ENG; /*!< (@ 0x000000C8) SYNTH2_ANA_ENG register */ + __IO uint32_t RESERVED4[7]; + __IO uint32_t RXADC_HWDELAYTRIM_OUT; /*!< (@ 0x000000E8) RXADC_HWDELAYTRIM_OUT register */ + __IO uint32_t RESERVED5[2]; + __IO uint32_t RX_AAF_HWTRIM_OUT; /*!< (@ 0x000000F4) RX_AAF_HWTRIM_OUT register */ + __IO uint32_t RESERVED6[2]; + __IO uint32_t SINGEN_ANA_ENG; /*!< (@ 0x00000100) SINGEN_ANA_ENG register */ + __IO uint32_t RESERVED7; + __IO uint32_t RF_INFO_OUT; /*!< (@ 0x00000108) RF_INFO_OUT register */ + __IO uint32_t RESERVED8[6]; + __IO uint32_t RF_FSM8_TIMEOUT; /*!< (@ 0x00000124) RF_FSM8_TIMEOUT register */ + __IO uint32_t RF_FSM9_TIMEOUT; /*!< (@ 0x00000128) RF_FSM9_TIMEOUT register */ + __IO uint32_t RF_FSM10_TIMEOUT; /*!< (@ 0x0000012C) RF_FSM10_TIMEOUT register */ + __IO uint32_t RESERVED9[5]; + __IO uint32_t SUBG_DIG_CTRL0; /*!< (@ 0x00000144) SUBG_DIG_CTRL0 register */ +} MR_SUBG_RADIO_TypeDef; /*!< Size = 328 (0x148) */ + + + +/* =========================================================================================================================== */ +/* ================ MR_SUBG_GLOB_STATIC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief MR_SUBG Global Static + */ + +typedef struct{ /*!< MR_SUBG_GLOB_STATIC Structure */ + __IO uint32_t PCKT_CONFIG; /*!< (@ 0x00000000) PCKT_CONFIG register */ + __IO uint32_t SYNC; /*!< (@ 0x00000004) SYNC register */ + __IO uint32_t SEC_SYNC; /*!< (@ 0x00000008) SEC_SYNC register */ + __IO uint32_t CRC_INIT; /*!< (@ 0x0000000C) CRC_INIT register */ + __IO uint32_t PCKT_CTRL; /*!< (@ 0x00000010) PCKT_CTRL register */ + __IO uint32_t DATABUFFER0_PTR; /*!< (@ 0x00000014) DATABUFFER0_PTR register */ + __IO uint32_t DATABUFFER1_PTR; /*!< (@ 0x00000018) DATABUFFER1_PTR register */ + __IO uint32_t DATABUFFER_SIZE; /*!< (@ 0x0000001C) DATABUFFER_SIZE register */ + __IO uint32_t PA_LEVEL_3_0; /*!< (@ 0x00000020) PA_LEVEL_3_0 register */ + __IO uint32_t PA_LEVEL_7_4; /*!< (@ 0x00000024) PA_LEVEL_7_4 register */ + __IO uint32_t PA_CONFIG; /*!< (@ 0x00000028) PA_CONFIG register */ + __IO uint32_t IF_CTRL; /*!< (@ 0x0000002C) IF_CTRL register */ + __IO uint32_t AS_QI_CTRL; /*!< (@ 0x00000030) AS_QI_CTRL register */ + __IO uint32_t IQC_CONFIG; /*!< (@ 0x00000034) IQC_CONFIG register */ + __IO uint32_t DSSS_CTRL; /*!< (@ 0x00000038) DSSS_CTRL register */ +} MR_SUBG_GLOB_STATIC_TypeDef; /*!< Size = 60 (0x3C) */ + + +/* =========================================================================================================================== */ +/* ================ MR_SUBG_GLOB_DYNAMIC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief MR_SUBG Global Dynamic + */ + +typedef struct{ /*!< MR_SUBG_GLOB_DYNAMIC Structure */ + __IO uint32_t PCKTLEN_CONFIG; /*!< (@ 0x00000000) PCKTLEN_CONFIG register */ + __IO uint32_t MOD0_CONFIG; /*!< (@ 0x00000004) MOD0_CONFIG register */ + __IO uint32_t MOD1_CONFIG; /*!< (@ 0x00000008) MOD1_CONFIG register */ + __IO uint32_t SYNTH_FREQ; /*!< (@ 0x0000000C) SYNTH_FREQ register */ + __IO uint32_t VCO_CAL_CONFIG; /*!< (@ 0x00000010) VCO_CAL_CONFIG register */ + __IO uint32_t RX_TIMER; /*!< (@ 0x00000014) RX_TIMER register */ + __IO uint32_t DATABUFFER_THR; /*!< (@ 0x00000018) DATABUFFER_THR register */ + __IO uint32_t RFSEQ_IRQ_ENABLE; /*!< (@ 0x0000001C) RFSEQ_IRQ_ENABLE register */ + __IO uint32_t ADDITIONAL_CTRL; /*!< (@ 0x00000020) ADDITIONAL_CTRL register */ + __IO uint32_t FAST_RX_TIMER; /*!< (@ 0x00000024) FAST_RX_TIMER register */ + __IO uint32_t COMMAND; /*!< (@ 0x00000028) COMMAND register */ +} MR_SUBG_GLOB_DYNAMIC_TypeDef; /*!< Size = 44 (0x2C) */ + + +/* =========================================================================================================================== */ +/* ================ MR_SUBG_GLOB_STATUS ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief MR_SUBG Global Status + */ + +typedef struct{ /*!< MR_SUBG_GLOB_STATUS Structure */ + __IO uint32_t RFSEQ_IRQ_STATUS; /*!< (@ 0x00000000) RFSEQ_IRQ_STATUS register */ + __IO uint32_t RFSEQ_STATUS_DETAIL; /*!< (@ 0x00000004) RFSEQ_STATUS_DETAIL register */ + __IO uint32_t RADIO_FSM_INFO; /*!< (@ 0x00000008) RADIO_FSM_INFO register */ + __IO uint32_t RX_INDICATOR; /*!< (@ 0x0000000C) RX_INDICATOR register */ + __IO uint32_t RX_INFO_REG; /*!< (@ 0x00000010) RX_INFO_REG register */ + __IO uint32_t RX_CRC_REG; /*!< (@ 0x00000014) RX_CRC_REG register */ + __IO uint32_t QI_INFO; /*!< (@ 0x00000018) QI_INFO register */ + __IO uint32_t DATABUFFER_INFO; /*!< (@ 0x0000001C) DATABUFFER_INFO register */ + __IO uint32_t TIME_CAPTURE; /*!< (@ 0x00000020) TIME_CAPTURE register */ + __IO uint32_t IQC_CORRECTION_OUT; /*!< (@ 0x00000024) IQC_CORRECTION_OUT register */ + __IO uint32_t PA_SAFEASK_OUT; /*!< (@ 0x00000028) PA_SAFEASK_OUT register */ + __IO uint32_t VCO_CALIB_OUT; /*!< (@ 0x0000002C) VCO_CALIB_OUT register */ + __IO uint32_t SEQ_INFO; /*!< (@ 0x00000030) SEQ_INFO register */ + __IO uint32_t SEQ_EVENT_STATUS; /*!< (@ 0x00000034) SEQ_EVENT_STATUS register */ +} MR_SUBG_GLOB_STATUS_TypeDef; /*!< Size = 56 (0x38) */ + + + +/* =========================================================================================================================== */ +/* ================ MR_SUBG_GLOB_MISC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief MR_SUBG Global Misc + */ + +typedef struct{ /*!< MR_SUBG_GLOB_MISC Structure */ + __IO uint32_t RFIP_VERSION; /*!< (@ 0x00000000) RFIP_VERSION register */ + __IO uint32_t RRM_UDRA_CTRL; /*!< (@ 0x00000004) RRM_UDRA_CTRL register */ + __IO uint32_t SEQUENCER_CTRL; /*!< (@ 0x00000008) SEQUENCER_CTRL register */ + __IO uint32_t ABSOLUTE_TIME; /*!< (@ 0x0000000C) ABSOLUTE_TIME register */ + __IO uint32_t SCM_COUNTER_VAL; /*!< (@ 0x00000010) SCM_COUNTER_VAL register */ + __IO uint32_t SCM_MIN_MAX; /*!< (@ 0x00000014) SCM_MIN_MAX register */ + __IO uint32_t WAKEUP_IRQ_STATUS; /*!< (@ 0x00000018) WAKEUP_IRQ_STATUS register */ +} MR_SUBG_GLOB_MISC_TypeDef; /*!< Size = 28 (0x1C) */ + + + +/* =========================================================================================================================== */ +/* ================ MR_SUBG_GLOB_RETAINED ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief MR_SUBG Global Retained + */ + +typedef struct{ /*!< MR_SUBG_GLOB_RETAINED Structure */ + __IO uint32_t RFIP_WAKEUPTIME; /*!< (@ 0x00000000) RFIP_WAKEUPTIME register */ + __IO uint32_t CPU_WAKEUPTIME; /*!< (@ 0x00000004) CPU_WAKEUPTIME register */ + __IO uint32_t WAKEUP_CTRL; /*!< (@ 0x00000008) WAKEUP_CTRL register */ + __IO uint32_t RRM_CMDLIST_PTR; /*!< (@ 0x0000000C) RRM_CMDLIST_PTR register */ + __IO uint32_t SEQ_GLOBALTABLE_PTR; /*!< (@ 0x00000010) SEQ_GLOBALTABLE_PTR register */ +} MR_SUBG_GLOB_RETAINED_TypeDef; /*!< Size = 20 (0x14) */ + + + +/* =========================================================================================================================== */ +/* ================ LPAWUR ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Low Power Autonomous Wakeup Radio IP + */ + +typedef struct{ /*!< LPAWUR Structure */ + __IO uint32_t FRAME_CONFIG0; /*!< (@ 0x00000000) FRAME_CONFIG0 register */ + __IO uint32_t FRAME_CONFIG1; /*!< (@ 0x00000004) FRAME_CONFIG1 register */ + __IO uint32_t FRAME_SYNC_CONFIG; /*!< (@ 0x00000008) FRAME_SYNC_CONFIG register */ + __IO uint32_t RFIP_CONFIG; /*!< (@ 0x0000000C) RFIP_CONFIG register */ + __IO uint32_t RF_CONFIG; /*!< (@ 0x00000010) RF_CONFIG register */ + __IO uint32_t AGC_CONFIG; /*!< (@ 0x00000014) AGC_CONFIG register */ + __IO uint32_t RESERVED; + __IO uint32_t PAYLOAD_0; /*!< (@ 0x0000001C) PAYLOAD_0 register */ + __IO uint32_t PAYLOAD_1; /*!< (@ 0x00000020) PAYLOAD_1 register */ + __IO uint32_t RESERVED1[7]; + __IO uint32_t RFIP_VERSION; /*!< (@ 0x00000040) RFIP_VERSION register */ + __IO uint32_t IRQ_ENABLE; /*!< (@ 0x00000044) IRQ_ENABLE register */ + __IO uint32_t STATUS; /*!< (@ 0x00000048) STATUS register */ +} LPAWUR_TypeDef; /*!< Size = 76 (0x4C) */ + + + +/** @} */ /* End of group Device_Peripheral_peripherals */ + + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Address Map ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup Device_Peripheral_peripheralAddr + * @{ + */ +#define FLASH_BASE (0x10040000UL) /*!< Main FLASH base address */ +#define SRAM_BASE (0x20000000UL) /*!< SRAM base address */ +#define PERIPH_BASE (0x40000000UL) /*!< Peripheral base address */ + + +/*!< System Memory, OTP bytes */ + +/* Base addresses */ +#define SYSTEM_MEMORY_BASE (0x10000000UL) /*!< System Memory : 6KB (0x10000000 – 0x100017FF) */ +#define OTP_AREA_BASE (0x10001800UL) /*!< OTP area : 1kB (0x10001800 – 0x10001BFF) */ + +#define SRAM0_BASE SRAM_BASE /*!< SRAM0 (16 KB) base address */ +#define SRAM1_BASE (SRAM_BASE + 0x00004000UL) /*!< SRAM1 (16 KB) base address */ + +/* End addresses */ +#define SRAM0_END_ADDR (0x20003FFFUL) /*!< RAM0 : 16KB (0x20000000 – 0x20003FFF) */ +#define SRAM1_END_ADDR (0x20007FFFUL) /*!< RAM1 : 16KB (0x20004000 – 0x20007FFF) */ + +#define SYSTEM_MEMORY_END_ADDR (0x100017FFUL) /*!< System Memory : 6KB (0x10000000 – 0x100017FF) */ +#define OTP_AREA_END_ADDR (0x10001BFFUL) /*!< OTP area : 1KB (0x10001800 – 0x10001BFF) */ + +/*!< Peripheral memory map */ +#define APB0PERIPH_BASE PERIPH_BASE +#define APB1PERIPH_BASE (PERIPH_BASE + 0x01000000LU) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x08000000LU) +#define APB2PERIPH_BASE (PERIPH_BASE + 0x09000000LU) + + +/*!< APB0 peripherals */ +#define SYSCFG_BASE (APB0PERIPH_BASE + 0x0000UL) +#define FLASH_R_BASE (APB0PERIPH_BASE + 0x1000UL) +#define TIM2_BASE (APB0PERIPH_BASE + 0x2000UL) +#define IWDG_BASE (APB0PERIPH_BASE + 0x3000UL) +#define RTC_BASE (APB0PERIPH_BASE + 0x4000UL) +#define TIM16_BASE (APB0PERIPH_BASE + 0x5000UL) +#define DAC1_BASE (APB0PERIPH_BASE + 0x6000UL) +#define LCD_BASE (APB0PERIPH_BASE + 0x7000UL) +#define DBGMCU_BASE (APB0PERIPH_BASE + 0x8000UL) +#define COMP_BASE (APB0PERIPH_BASE + 0x9000UL) +#define LCSC_BASE (APB0PERIPH_BASE + 0xA000UL) + + +/*!< APB1 peripherals */ +#define I2C1_BASE (APB1PERIPH_BASE + 0x0000UL) +#define I2C2_BASE (APB1PERIPH_BASE + 0x1000UL) +#define SPI1_BASE (APB1PERIPH_BASE + 0x2000UL) +#define USART1_BASE (APB1PERIPH_BASE + 0x4000UL) +#define LPUART1_BASE (APB1PERIPH_BASE + 0x5000UL) +#define ADC1_BASE (APB1PERIPH_BASE + 0x6000UL) +#define SPI3_BASE (APB1PERIPH_BASE + 0x7000UL) + +/*!< AHB peripherals */ +#define GPIOA_BASE (AHBPERIPH_BASE + 0x000000UL) +#define GPIOB_BASE (AHBPERIPH_BASE + 0x100000UL) +#define CRC_BASE (AHBPERIPH_BASE + 0x200000UL) +#define RCC_BASE (AHBPERIPH_BASE + 0x400000UL) +#define PWR_BASE (AHBPERIPH_BASE + 0x500000UL) +#define RNG_BASE (AHBPERIPH_BASE + 0x600000UL) +#define DMA1_BASE (AHBPERIPH_BASE + 0x700000UL) +#define DMAMUX1_BASE (AHBPERIPH_BASE + 0x800000UL) +#define AES_BASE (AHBPERIPH_BASE + 0x900000UL) + +#define DMA1_Channel1_BASE (DMA1_BASE + 0x0008UL) +#define DMA1_Channel2_BASE (DMA1_BASE + 0x001CUL) +#define DMA1_Channel3_BASE (DMA1_BASE + 0x0030UL) +#define DMA1_Channel4_BASE (DMA1_BASE + 0x0044UL) +#define DMA1_Channel5_BASE (DMA1_BASE + 0x0058UL) +#define DMA1_Channel6_BASE (DMA1_BASE + 0x006CUL) +#define DMA1_Channel7_BASE (DMA1_BASE + 0x0080UL) +#define DMA1_Channel8_BASE (DMA1_BASE + 0x0094UL) + +#define DMAMUX1_Channel0_BASE (DMAMUX1_BASE) +#define DMAMUX1_Channel1_BASE (DMAMUX1_BASE + 0x00000004UL) +#define DMAMUX1_Channel2_BASE (DMAMUX1_BASE + 0x00000008UL) +#define DMAMUX1_Channel3_BASE (DMAMUX1_BASE + 0x0000000CUL) +#define DMAMUX1_Channel4_BASE (DMAMUX1_BASE + 0x00000010UL) +#define DMAMUX1_Channel5_BASE (DMAMUX1_BASE + 0x00000014UL) +#define DMAMUX1_Channel6_BASE (DMAMUX1_BASE + 0x00000018UL) +#define DMAMUX1_Channel7_BASE (DMAMUX1_BASE + 0x0000001CUL) + +/*!< APB2 peripherals */ +#define MR_SUBG_BASE (APB2PERIPH_BASE + 0x0000UL) +#define MR_SUBG_RADIO_BASE (MR_SUBG_BASE + 0x0000UL) +#define MR_SUBG_GLOB_STATIC_BASE (MR_SUBG_BASE + 0x0400UL) +#define MR_SUBG_GLOB_DYNAMIC_BASE (MR_SUBG_BASE + 0x0500UL) +#define MR_SUBG_GLOB_STATUS_BASE (MR_SUBG_BASE + 0x0600UL) +#define MR_SUBG_GLOB_MISC_BASE (MR_SUBG_BASE + 0x0700UL) +#define MR_SUBG_GLOB_RETAINED_BASE (MR_SUBG_BASE + 0x0780UL) +#define LPAWUR_BASE (APB2PERIPH_BASE + 0x1000UL) + + +/** @} */ /* End of group Device_Peripheral_peripheralAddr */ + + +/* =========================================================================================================================== */ +/* ================ Peripheral declaration ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup Device_Peripheral_declaration + * @{ + */ + + +/* Peripherals available on APB0 bus */ +#define SYSCFG ((SYSCFG_TypeDef*) SYSCFG_BASE) +#define FLASH ((FLASH_TypeDef*) FLASH_R_BASE) +#define TIM2 ((TIM_TypeDef*) TIM2_BASE) +#define IWDG ((IWDG_TypeDef*) IWDG_BASE) +#define RTC ((RTC_TypeDef*) RTC_BASE) +#define TIM16 ((TIM_TypeDef*) TIM16_BASE) +#define DAC1 ((DAC_TypeDef*) DAC1_BASE) +#define LCD ((LCD_TypeDef*) LCD_BASE) +#define DBGMCU ((DBGMCU_TypeDef*) DBGMCU_BASE) +#define COMP1 ((COMP_TypeDef*) COMP_BASE) +#define LCSC ((LCSC_TypeDef*) LCSC_BASE) + +/* Peripherals available on APB1 bus */ +#define I2C1 ((I2C_TypeDef*) I2C1_BASE) +#define I2C2 ((I2C_TypeDef*) I2C2_BASE) +#define SPI1 ((SPI_TypeDef*) SPI1_BASE) +#define USART1 ((USART_TypeDef*) USART1_BASE) +#define LPUART1 ((USART_TypeDef*) LPUART1_BASE) +#define ADC1 ((ADC_TypeDef*) ADC1_BASE) +#define SPI3 ((SPI_TypeDef*) SPI3_BASE) + +/* Peripherals available on AHB bus */ +#define GPIOA ((GPIO_TypeDef*) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef*) GPIOB_BASE) +#define CRC ((CRC_TypeDef*) CRC_BASE) +#define RCC ((RCC_TypeDef*) RCC_BASE) +#define PWR ((PWR_TypeDef*) PWR_BASE) +#define RNG ((RNG_TypeDef*) RNG_BASE) +#define DMA1 ((DMA_TypeDef*) DMA1_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA1_Channel8 ((DMA_Channel_TypeDef *) DMA1_Channel8_BASE) +#define DMAMUX1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_BASE) +#define DMAMUX1_Channel0 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel0_BASE) +#define DMAMUX1_Channel1 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel1_BASE) +#define DMAMUX1_Channel2 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel2_BASE) +#define DMAMUX1_Channel3 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel3_BASE) +#define DMAMUX1_Channel4 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel4_BASE) +#define DMAMUX1_Channel5 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel5_BASE) +#define DMAMUX1_Channel6 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel6_BASE) +#define DMAMUX1_Channel7 ((DMAMUX_Channel_TypeDef *) DMAMUX1_Channel7_BASE) +#define AES ((AES_TypeDef*) AES_BASE) + +/* Peripherals available on APB2 bus */ +#define MR_SUBG_RADIO ((MR_SUBG_RADIO_TypeDef*) MR_SUBG_RADIO_BASE) +#define MR_SUBG_GLOB_STATIC ((MR_SUBG_GLOB_STATIC_TypeDef*) MR_SUBG_GLOB_STATIC_BASE) +#define MR_SUBG_GLOB_DYNAMIC ((MR_SUBG_GLOB_DYNAMIC_TypeDef*) MR_SUBG_GLOB_DYNAMIC_BASE) +#define MR_SUBG_GLOB_STATUS ((MR_SUBG_GLOB_STATUS_TypeDef*) MR_SUBG_GLOB_STATUS_BASE) +#define MR_SUBG_GLOB_MISC ((MR_SUBG_GLOB_MISC_TypeDef*) MR_SUBG_GLOB_MISC_BASE) +#define MR_SUBG_GLOB_RETAINED ((MR_SUBG_GLOB_RETAINED_TypeDef*) MR_SUBG_GLOB_RETAINED_BASE) +#define LPAWUR ((LPAWUR_TypeDef*) LPAWUR_BASE) + +/** @} */ /* End of group Device_Peripheral_declaration */ + +/* ========================================= End of section using anonymous unions ========================================= */ +#if defined (__CC_ARM) + #pragma pop +#elif defined (__ICCARM__) + /* leave anonymous unions enabled */ +#elif (__ARMCC_VERSION >= 6010050) + #pragma clang diagnostic pop +#elif defined (__GNUC__) + /* anonymous unions are enabled by default */ +#elif defined (__TMS470__) + /* anonymous unions are enabled by default */ +#elif defined (__TASKING__) + #pragma warning restore +#elif defined (__CSMC__) + /* anonymous unions are enabled by default */ +#endif + + +/* =========================================================================================================================== */ +/* ================ Pos/Mask Peripheral Section ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup PosMask_peripherals + * @{ + */ + +/* ============================================================================================================================*/ +/*===================== SYSCFG =====================*/ +/* ============================================================================================================================*/ + +/* ===================================================== DIE_ID =====================================================*/ +#define SYSCFG_DIE_ID_PRODUCT_Pos (8UL) /*! + + + + + + Release Notes for STM32WL33x CMSIS + + + + + + +
+
+
+

Release Notes for

+

STM32WL3xx CMSIS

+

Copyright © 2024 STMicroelectronics
+

+ +
+

Purpose

+

This driver provides the CMSIS device for the STM32WL33x products. +This covers

+
    +
  • STM32WL33x devices
    • +
+

This driver is composed of the description of the registers under +“Include” directory.

+

Various template files are provided to easily build an application. +They can be adapted to fit applications requirements.

+
    +
  • Templates/system_stm32wl3x.c contains the initialization code +referred as SystemInit.
    • +
  • Startup files are provided as example for EWARM©.
    • +
  • Linker files are provided as example for EWARM©.
    • +
+
+
+

Update history

+
+ + +
+

Main Changes

+
    +
  • Documentation based on jQuery 1.7.1 removed
    • +
+

Contents

+
    +
  • Add PULSETRIM bits definition in CMSIS header files
    • +
  • Renamed some interrupt to improve clarity and consistency
    • +
  • Added FQCY_BAND_ID bits definition for RF_INFO_OUT register
    • +
+

Known Limitations

+
    +
  • CMSIS devices files are delivered “as is” and have not been fully +validated
    • +
+

Development Toolchains and +Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V9.30.1
    • +
+

Supported Devices and boards

+
    +
  • STM32WL3xx devices
    • +
+
+
+
+ + +
+

Main Changes

+

Release

+
    +
  • Release of CMSIS for STM32WL3xx devices
    • +
+

Contents

+
    +
  • CMSIS devices files for STM32WL3xx
    • +
+

Known Limitations

+
    +
  • CMSIS devices files are delivered “as is” and have not been fully +validated
    • +
+

Development Toolchains +and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V9.30.1
    • +
+

Supported Devices and +boards

+
    +
  • STM32WL3xx devices
    • +
+
+
+
+ + +
+

Main Changes

+

First Release

+
    +
  • First Official Release of CMSIS for STM32WL33x devices
    • +
+

Contents

+
    +
  • CMSIS devices files for STM32WL33x
    • +
+

Known Limitations

+
    +
  • CMSIS devices files are delivered “as is” and have not been fully +validated
    • +
+

Development Toolchains +and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V9.30.1
    • +
+

Supported Devices and +boards

+
    +
  • STM32WL33x devices
    • +
+
+
+
+
+
+
+
+

For complete documentation on STM32 Microcontrollers , visit: +www.st.com/stm32

+

This release note uses up to date web standards and, for this +reason, should not be opened with Internet Explorer but preferably with +popular browsers such as Google Chrome, Mozilla Firefox, Opera or +Microsoft Edge.

+
+

Info

+
+
+
+ + diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/STM32WL33x8_flash.ld b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/STM32WL33x8_flash.ld new file mode 100644 index 0000000000..a7f206c3a2 --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/STM32WL33x8_flash.ld @@ -0,0 +1,191 @@ +/******************************************************************************* +* STM32WL3x generic linker file for GCC +* Main linker variables to control it are: +* +* MEMORY_FLASH_APP_SIZE: define the size of the application in case not all the flash is needed. +* Default value is: 64KB +* +* MEMORY_FLASH_APP_OFFSET: define the offset of the application. +* Default value is: 0 offset +* +* MEMORY_RAM_APP_OFFSET: define the offset in RAM from which variables can be +* allocated. +* +*******************************************************************************/ + +/******************************************************************************* +* Memory Definitions +*******************************************************************************/ +/* +STM32WL3x memory map ++-----------------------+ 0x20003FFF +| RAM (16K) | ++-----------------------+ 0x20000000 +| | +| | ++-----------------------+ 0x1004FFFF +| | +| FLASH (64K) | ++-----------------------+ 0x10040000 +| | ++-----------------------| 0x100017FF +| ROM (6K) | ++-----------------------+ 0x10000000 +*/ + + +_MEMORY_RAM_BEGIN_ = 0x20000000; +_MEMORY_RAM_SIZE_ = 0x4000; /* 16KB */ +_MEMORY_RAM_END_ = 0x20003FFF; + +_MEMORY_FLASH_BEGIN_ = 0x10040000; +_MEMORY_FLASH_SIZE_ = 0x10000; /* 64KB */ +_MEMORY_FLASH_END_ = 0x1004FFFF; + +_MEMORY_ROM_BEGIN_ = 0x10000000; +_MEMORY_ROM_SIZE_ = 0x01800; /* 6KB */ +_MEMORY_ROM_END_ = 0x100017FF; + + +MEMORY_FLASH_APP_OFFSET = DEFINED(MEMORY_FLASH_APP_OFFSET) ? (MEMORY_FLASH_APP_OFFSET) : (0) ; +MEMORY_FLASH_APP_SIZE = DEFINED(MEMORY_FLASH_APP_SIZE) ? (MEMORY_FLASH_APP_SIZE) : (_MEMORY_FLASH_SIZE_ - MEMORY_FLASH_APP_OFFSET); +RESET_MANAGER_SIZE = DEFINED(RESET_MANAGER_SIZE) ? (RESET_MANAGER_SIZE) : (0x800) ; + + +/* Entry Point */ +ENTRY(Reset_Handler) + + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x000; /* required amount of heap */ +_Min_Stack_Size = 0xC00; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + REGION_RAM (xrw) : ORIGIN = _MEMORY_RAM_BEGIN_, LENGTH = _MEMORY_RAM_SIZE_ + REGION_FLASH_BOOTLOADER (rx) : ORIGIN = _MEMORY_FLASH_BEGIN_, LENGTH = MEMORY_FLASH_APP_OFFSET + REGION_FLASH (rx) : ORIGIN = _MEMORY_FLASH_BEGIN_ + MEMORY_FLASH_APP_OFFSET, LENGTH = MEMORY_FLASH_APP_SIZE + REGION_ROM (rx) : ORIGIN = _MEMORY_ROM_BEGIN_, LENGTH = _MEMORY_ROM_SIZE_ +} + +/* Define output sections */ +SECTIONS +{ + + /* The startup code goes first into FLASH */ + .intvec (ORIGIN(REGION_FLASH)) : + { + . = ALIGN(4); + + KEEP(*(.intvec)) /* Startup code */ + + . = ALIGN(4); + } >REGION_FLASH + + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + + KEEP(*(.cmd_call_table)) + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(i.*) /* i.* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.constdata) + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + . = ALIGN(4); + _etext = .; + } >REGION_FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* RAM preamble, uninitialized */ + .ram_preamble 0x20000004 (NOLOAD) : + { + KEEP(*(.ram_vr)) + } >REGION_RAM AT> REGION_FLASH + + /* RAM preamble, unininitialized */ + .ram_preamble_2 0x20000034 (NOLOAD) : + { + KEEP(*(.crash_info_ram_vr)) + } >REGION_RAM + /* Uninitialized data section */ + + .bss DEFINED(MEMORY_RAM_APP_OFFSET) ? (ORIGIN(REGION_RAM) + MEMORY_RAM_APP_OFFSET) : . : + { + . = ALIGN(4); + _sbss = .; /* define a global symbol at bss start */ + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + } >REGION_RAM + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >REGION_RAM AT> REGION_FLASH + + /* Data section that will not be initialized to any value. */ + .noinit (NOLOAD): + { + . = ALIGN(4); + *(.noinit) + . = ALIGN(4); + } >REGION_RAM + + .heap (NOLOAD): + { + . = ALIGN(4); + _sheap = .; + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = ALIGN(4); + _eheap = .; + } >REGION_RAM + + /* This is to emulate place at end of IAR linker */ + CSTACK (ORIGIN(REGION_RAM) + LENGTH(REGION_RAM) - _Min_Stack_Size) (NOLOAD) : + { + . = ALIGN(4); + . = . + _Min_Stack_Size; + . = ALIGN(4); + _estack = .; /* define a global symbol at stack end */ + . = ALIGN(4); + } > REGION_RAM + + + .rom_info (NOLOAD) : + { + . = ALIGN(4); + KEEP(*(.rom_info)) + . = ALIGN(4); + } >REGION_ROM + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/STM32WL33xB_flash.ld b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/STM32WL33xB_flash.ld new file mode 100644 index 0000000000..6f376ad4fb --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/STM32WL33xB_flash.ld @@ -0,0 +1,191 @@ +/******************************************************************************* +* STM32WL3x generic linker file for GCC +* Main linker variables to control it are: +* +* MEMORY_FLASH_APP_SIZE: define the size of the application in case not all the flash is needed. +* Default value is: 128KB +* +* MEMORY_FLASH_APP_OFFSET: define the offset of the application. +* Default value is: 0 offset +* +* MEMORY_RAM_APP_OFFSET: define the offset in RAM from which variables can be +* allocated. +* +*******************************************************************************/ + +/******************************************************************************* +* Memory Definitions +*******************************************************************************/ +/* +STM32WL3x memory map ++-----------------------+ 0x20007FFF +| RAM (32K) | ++-----------------------+ 0x20000000 +| | +| | ++-----------------------+ 0x1005FFFF +| | +| FLASH (128K) | ++-----------------------+ 0x10040000 +| | ++-----------------------| 0x100017FF +| ROM (6K) | ++-----------------------+ 0x10000000 +*/ + + +_MEMORY_RAM_BEGIN_ = 0x20000000; +_MEMORY_RAM_SIZE_ = 0x8000; /* 32KB */ +_MEMORY_RAM_END_ = 0x20007FFF; + +_MEMORY_FLASH_BEGIN_ = 0x10040000; +_MEMORY_FLASH_SIZE_ = 0x20000; /* 128KB */ +_MEMORY_FLASH_END_ = 0x1005FFFF; + +_MEMORY_ROM_BEGIN_ = 0x10000000; +_MEMORY_ROM_SIZE_ = 0x01800; /* 6KB */ +_MEMORY_ROM_END_ = 0x100017FF; + + +MEMORY_FLASH_APP_OFFSET = DEFINED(MEMORY_FLASH_APP_OFFSET) ? (MEMORY_FLASH_APP_OFFSET) : (0) ; +MEMORY_FLASH_APP_SIZE = DEFINED(MEMORY_FLASH_APP_SIZE) ? (MEMORY_FLASH_APP_SIZE) : (_MEMORY_FLASH_SIZE_ - MEMORY_FLASH_APP_OFFSET); +RESET_MANAGER_SIZE = DEFINED(RESET_MANAGER_SIZE) ? (RESET_MANAGER_SIZE) : (0x800) ; + + +/* Entry Point */ +ENTRY(Reset_Handler) + + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x000; /* required amount of heap */ +_Min_Stack_Size = 0xC00; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + REGION_RAM (xrw) : ORIGIN = _MEMORY_RAM_BEGIN_, LENGTH = _MEMORY_RAM_SIZE_ + REGION_FLASH_BOOTLOADER (rx) : ORIGIN = _MEMORY_FLASH_BEGIN_, LENGTH = MEMORY_FLASH_APP_OFFSET + REGION_FLASH (rx) : ORIGIN = _MEMORY_FLASH_BEGIN_ + MEMORY_FLASH_APP_OFFSET, LENGTH = MEMORY_FLASH_APP_SIZE + REGION_ROM (rx) : ORIGIN = _MEMORY_ROM_BEGIN_, LENGTH = _MEMORY_ROM_SIZE_ +} + +/* Define output sections */ +SECTIONS +{ + + /* The startup code goes first into FLASH */ + .intvec (ORIGIN(REGION_FLASH)) : + { + . = ALIGN(4); + + KEEP(*(.intvec)) /* Startup code */ + + . = ALIGN(4); + } >REGION_FLASH + + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + + KEEP(*(.cmd_call_table)) + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(i.*) /* i.* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.constdata) + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + . = ALIGN(4); + _etext = .; + } >REGION_FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* RAM preamble, uninitialized */ + .ram_preamble 0x20000004 (NOLOAD) : + { + KEEP(*(.ram_vr)) + } >REGION_RAM AT> REGION_FLASH + + /* RAM preamble, unininitialized */ + .ram_preamble_2 0x20000034 (NOLOAD) : + { + KEEP(*(.crash_info_ram_vr)) + } >REGION_RAM + /* Uninitialized data section */ + + .bss DEFINED(MEMORY_RAM_APP_OFFSET) ? (ORIGIN(REGION_RAM) + MEMORY_RAM_APP_OFFSET) : . : + { + . = ALIGN(4); + _sbss = .; /* define a global symbol at bss start */ + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + } >REGION_RAM + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >REGION_RAM AT> REGION_FLASH + + /* Data section that will not be initialized to any value. */ + .noinit (NOLOAD): + { + . = ALIGN(4); + *(.noinit) + . = ALIGN(4); + } >REGION_RAM + + .heap (NOLOAD): + { + . = ALIGN(4); + _sheap = .; + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = ALIGN(4); + _eheap = .; + } >REGION_RAM + + /* This is to emulate place at end of IAR linker */ + CSTACK (ORIGIN(REGION_RAM) + LENGTH(REGION_RAM) - _Min_Stack_Size) (NOLOAD) : + { + . = ALIGN(4); + . = . + _Min_Stack_Size; + . = ALIGN(4); + _estack = .; /* define a global symbol at stack end */ + . = ALIGN(4); + } > REGION_RAM + + + .rom_info (NOLOAD) : + { + . = ALIGN(4); + KEEP(*(.rom_info)) + . = ALIGN(4); + } >REGION_ROM + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/STM32WL33xC_flash.ld b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/STM32WL33xC_flash.ld new file mode 100644 index 0000000000..e10273958b --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/STM32WL33xC_flash.ld @@ -0,0 +1,191 @@ +/******************************************************************************* +* STM32WL3x generic linker file for GCC +* Main linker variables to control it are: +* +* MEMORY_FLASH_APP_SIZE: define the size of the application in case not all the flash is needed. +* Default value is: 256KB +* +* MEMORY_FLASH_APP_OFFSET: define the offset of the application. +* Default value is: 0 offset +* +* MEMORY_RAM_APP_OFFSET: define the offset in RAM from which variables can be +* allocated. +* +*******************************************************************************/ + +/******************************************************************************* +* Memory Definitions +*******************************************************************************/ +/* +STM32WL3x memory map ++-----------------------+ 0x20007FFF +| RAM (32K) | ++-----------------------+ 0x20000000 +| | +| | ++-----------------------+ 0x1007FFFF +| | +| FLASH (256K) | ++-----------------------+ 0x10040000 +| | ++-----------------------| 0x100017FF +| ROM (6K) | ++-----------------------+ 0x10000000 +*/ + + +_MEMORY_RAM_BEGIN_ = 0x20000000; +_MEMORY_RAM_SIZE_ = 0x8000; /* 32KB */ +_MEMORY_RAM_END_ = 0x20007FFF; + +_MEMORY_FLASH_BEGIN_ = 0x10040000; +_MEMORY_FLASH_SIZE_ = 0x40000; /* 256KB */ +_MEMORY_FLASH_END_ = 0x1007FFFF; + +_MEMORY_ROM_BEGIN_ = 0x10000000; +_MEMORY_ROM_SIZE_ = 0x01800; /* 6KB */ +_MEMORY_ROM_END_ = 0x100017FF; + + +MEMORY_FLASH_APP_OFFSET = DEFINED(MEMORY_FLASH_APP_OFFSET) ? (MEMORY_FLASH_APP_OFFSET) : (0) ; +MEMORY_FLASH_APP_SIZE = DEFINED(MEMORY_FLASH_APP_SIZE) ? (MEMORY_FLASH_APP_SIZE) : (_MEMORY_FLASH_SIZE_ - MEMORY_FLASH_APP_OFFSET); +RESET_MANAGER_SIZE = DEFINED(RESET_MANAGER_SIZE) ? (RESET_MANAGER_SIZE) : (0x800) ; + + +/* Entry Point */ +ENTRY(Reset_Handler) + + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x000; /* required amount of heap */ +_Min_Stack_Size = 0xC00; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + REGION_RAM (xrw) : ORIGIN = _MEMORY_RAM_BEGIN_, LENGTH = _MEMORY_RAM_SIZE_ + REGION_FLASH_BOOTLOADER (rx) : ORIGIN = _MEMORY_FLASH_BEGIN_, LENGTH = MEMORY_FLASH_APP_OFFSET + REGION_FLASH (rx) : ORIGIN = _MEMORY_FLASH_BEGIN_ + MEMORY_FLASH_APP_OFFSET, LENGTH = MEMORY_FLASH_APP_SIZE + REGION_ROM (rx) : ORIGIN = _MEMORY_ROM_BEGIN_, LENGTH = _MEMORY_ROM_SIZE_ +} + +/* Define output sections */ +SECTIONS +{ + + /* The startup code goes first into FLASH */ + .intvec (ORIGIN(REGION_FLASH)) : + { + . = ALIGN(4); + + KEEP(*(.intvec)) /* Startup code */ + + . = ALIGN(4); + } >REGION_FLASH + + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + + KEEP(*(.cmd_call_table)) + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(i.*) /* i.* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.constdata) + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + . = ALIGN(4); + _etext = .; + } >REGION_FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* RAM preamble, uninitialized */ + .ram_preamble 0x20000004 (NOLOAD) : + { + KEEP(*(.ram_vr)) + } >REGION_RAM AT> REGION_FLASH + + /* RAM preamble, unininitialized */ + .ram_preamble_2 0x20000034 (NOLOAD) : + { + KEEP(*(.crash_info_ram_vr)) + } >REGION_RAM + /* Uninitialized data section */ + + .bss DEFINED(MEMORY_RAM_APP_OFFSET) ? (ORIGIN(REGION_RAM) + MEMORY_RAM_APP_OFFSET) : . : + { + . = ALIGN(4); + _sbss = .; /* define a global symbol at bss start */ + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + } >REGION_RAM + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >REGION_RAM AT> REGION_FLASH + + /* Data section that will not be initialized to any value. */ + .noinit (NOLOAD): + { + . = ALIGN(4); + *(.noinit) + . = ALIGN(4); + } >REGION_RAM + + .heap (NOLOAD): + { + . = ALIGN(4); + _sheap = .; + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = ALIGN(4); + _eheap = .; + } >REGION_RAM + + /* This is to emulate place at end of IAR linker */ + CSTACK (ORIGIN(REGION_RAM) + LENGTH(REGION_RAM) - _Min_Stack_Size) (NOLOAD) : + { + . = ALIGN(4); + . = . + _Min_Stack_Size; + . = ALIGN(4); + _estack = .; /* define a global symbol at stack end */ + . = ALIGN(4); + } > REGION_RAM + + + .rom_info (NOLOAD) : + { + . = ALIGN(4); + KEEP(*(.rom_info)) + . = ALIGN(4); + } >REGION_ROM + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/stm32wl3xx_flash.ld b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/stm32wl3xx_flash.ld new file mode 100644 index 0000000000..e10273958b --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/linker/stm32wl3xx_flash.ld @@ -0,0 +1,191 @@ +/******************************************************************************* +* STM32WL3x generic linker file for GCC +* Main linker variables to control it are: +* +* MEMORY_FLASH_APP_SIZE: define the size of the application in case not all the flash is needed. +* Default value is: 256KB +* +* MEMORY_FLASH_APP_OFFSET: define the offset of the application. +* Default value is: 0 offset +* +* MEMORY_RAM_APP_OFFSET: define the offset in RAM from which variables can be +* allocated. +* +*******************************************************************************/ + +/******************************************************************************* +* Memory Definitions +*******************************************************************************/ +/* +STM32WL3x memory map ++-----------------------+ 0x20007FFF +| RAM (32K) | ++-----------------------+ 0x20000000 +| | +| | ++-----------------------+ 0x1007FFFF +| | +| FLASH (256K) | ++-----------------------+ 0x10040000 +| | ++-----------------------| 0x100017FF +| ROM (6K) | ++-----------------------+ 0x10000000 +*/ + + +_MEMORY_RAM_BEGIN_ = 0x20000000; +_MEMORY_RAM_SIZE_ = 0x8000; /* 32KB */ +_MEMORY_RAM_END_ = 0x20007FFF; + +_MEMORY_FLASH_BEGIN_ = 0x10040000; +_MEMORY_FLASH_SIZE_ = 0x40000; /* 256KB */ +_MEMORY_FLASH_END_ = 0x1007FFFF; + +_MEMORY_ROM_BEGIN_ = 0x10000000; +_MEMORY_ROM_SIZE_ = 0x01800; /* 6KB */ +_MEMORY_ROM_END_ = 0x100017FF; + + +MEMORY_FLASH_APP_OFFSET = DEFINED(MEMORY_FLASH_APP_OFFSET) ? (MEMORY_FLASH_APP_OFFSET) : (0) ; +MEMORY_FLASH_APP_SIZE = DEFINED(MEMORY_FLASH_APP_SIZE) ? (MEMORY_FLASH_APP_SIZE) : (_MEMORY_FLASH_SIZE_ - MEMORY_FLASH_APP_OFFSET); +RESET_MANAGER_SIZE = DEFINED(RESET_MANAGER_SIZE) ? (RESET_MANAGER_SIZE) : (0x800) ; + + +/* Entry Point */ +ENTRY(Reset_Handler) + + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x000; /* required amount of heap */ +_Min_Stack_Size = 0xC00; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + REGION_RAM (xrw) : ORIGIN = _MEMORY_RAM_BEGIN_, LENGTH = _MEMORY_RAM_SIZE_ + REGION_FLASH_BOOTLOADER (rx) : ORIGIN = _MEMORY_FLASH_BEGIN_, LENGTH = MEMORY_FLASH_APP_OFFSET + REGION_FLASH (rx) : ORIGIN = _MEMORY_FLASH_BEGIN_ + MEMORY_FLASH_APP_OFFSET, LENGTH = MEMORY_FLASH_APP_SIZE + REGION_ROM (rx) : ORIGIN = _MEMORY_ROM_BEGIN_, LENGTH = _MEMORY_ROM_SIZE_ +} + +/* Define output sections */ +SECTIONS +{ + + /* The startup code goes first into FLASH */ + .intvec (ORIGIN(REGION_FLASH)) : + { + . = ALIGN(4); + + KEEP(*(.intvec)) /* Startup code */ + + . = ALIGN(4); + } >REGION_FLASH + + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + + KEEP(*(.cmd_call_table)) + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(i.*) /* i.* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.constdata) + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + . = ALIGN(4); + _etext = .; + } >REGION_FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* RAM preamble, uninitialized */ + .ram_preamble 0x20000004 (NOLOAD) : + { + KEEP(*(.ram_vr)) + } >REGION_RAM AT> REGION_FLASH + + /* RAM preamble, unininitialized */ + .ram_preamble_2 0x20000034 (NOLOAD) : + { + KEEP(*(.crash_info_ram_vr)) + } >REGION_RAM + /* Uninitialized data section */ + + .bss DEFINED(MEMORY_RAM_APP_OFFSET) ? (ORIGIN(REGION_RAM) + MEMORY_RAM_APP_OFFSET) : . : + { + . = ALIGN(4); + _sbss = .; /* define a global symbol at bss start */ + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + } >REGION_RAM + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >REGION_RAM AT> REGION_FLASH + + /* Data section that will not be initialized to any value. */ + .noinit (NOLOAD): + { + . = ALIGN(4); + *(.noinit) + . = ALIGN(4); + } >REGION_RAM + + .heap (NOLOAD): + { + . = ALIGN(4); + _sheap = .; + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = ALIGN(4); + _eheap = .; + } >REGION_RAM + + /* This is to emulate place at end of IAR linker */ + CSTACK (ORIGIN(REGION_RAM) + LENGTH(REGION_RAM) - _Min_Stack_Size) (NOLOAD) : + { + . = ALIGN(4); + . = . + _Min_Stack_Size; + . = ALIGN(4); + _estack = .; /* define a global symbol at stack end */ + . = ALIGN(4); + } > REGION_RAM + + + .rom_info (NOLOAD) : + { + . = ALIGN(4); + KEEP(*(.rom_info)) + . = ALIGN(4); + } >REGION_ROM + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/startup_stm32wl3xx.s b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/startup_stm32wl3xx.s new file mode 100644 index 0000000000..28bf2e6da6 --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/gcc/startup_stm32wl3xx.s @@ -0,0 +1,277 @@ +/** + ****************************************************************************** + * @file : startup_stm32wl3x.s + * @author : GPM WBL Application Team + * @brief : STM32WL3x Ultra Low Power Devices vector + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0+ processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0plus + .fpu softvfp + .thumb + +.global __vector_table +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ +/* Call the clock system initialization function.*/ + bl SystemInit + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2] + adds r2, r2, #4 + + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .intvec,"a",%progbits + .type __vector_table, %object + .size __vector_table, .-__vector_table + + +__vector_table: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word FLASH_IRQHandler /* IRQ0: FLASH Controller interrupt */ + .word RCC_IRQHandler /* IRQ1: RCC interrupt */ + .word PVD_IRQHandler /* IRQ2: PVD interrupt */ + .word I2C1_IRQHandler /* IRQ3: I2C1 interrupt */ + .word I2C2_IRQHandler /* IRQ4: I2C2 interrupt */ + .word SPI1_IRQHandler /* IRQ5: SPI1 interrupt */ + .word 0x00000000 /* IRQ6: Reserved */ + .word SPI3_IRQHandler /* IRQ7: SPI3 interrupt */ + .word USART1_IRQHandler /* IRQ8: USART1 interrupt */ + .word LPUART1_IRQHandler /* IRQ9: LPUART1 interrupt */ + .word TIM2_IRQHandler /* IRQ10: TIM2 interrupt */ + .word RTC_IRQHandler /* IRQ11: RTC interrupt */ + .word ADC_IRQHandler /* IRQ12: ADC interrupt */ + .word AES_IRQHandler /* IRQ13: AES interrupt */ + .word 0x00000000 /* IRQ14: Reserved */ + .word GPIOA_IRQHandler /* IRQ15: GPIOA interrupt */ + .word GPIOB_IRQHandler /* IRQ16: GPIOB interrupt */ + .word DMA_IRQHandler /* IRQ17: DMA interrupt */ + .word LPAWUR_IRQHandler /* IRQ18: LPAWUR interrupt */ + .word COMP1_IRQHandler /* IRQ19: COMP1 interrupt */ + .word MRSUBG_BUSY_IRQHandler /* IRQ20: MR SUBG BUSY interrupt */ + .word MRSUBG_IRQHandler /* IRQ21: MR SUBG interrupt */ + .word MRSUBG_TX_RX_SEQUENCE_IRQHandler /* IRQ22: MR SUBG TX RX Sequence interrupt */ + .word MRSUBG_TIMER_CPU_WKUP_IRQHandler /* IRQ23: MR SUBG TIMER CPU Wakeup interrupt */ + .word MRSUBG_WKUP_IRQHandler /* IRQ24: MR SUBG Wakeup interrupt */ + .word DAC_IRQHandler /* IRQ25: DAC interrupt */ + .word TIM16_IRQHandler /* IRQ26: TIM16 interrupt */ + .word LCD_IRQHandler /* IRQ27: LCD interrupt */ + .word LCSC_IRQHandler /* IRQ28: LCSC interrupt */ + .word LCSC_LC_ACTIVITY_IRQHandler /* IRQ29: LCSC LC ACTIVITY interrupt */ + .word 0x00000000 /* IRQ30: Reserved */ + .word 0x00000000 /* IRQ31: Reserved */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak LPUART1_IRQHandler + .thumb_set LPUART1_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak AES_IRQHandler + .thumb_set AES_IRQHandler,Default_Handler + + .weak GPIOA_IRQHandler + .thumb_set GPIOA_IRQHandler,Default_Handler + + .weak GPIOB_IRQHandler + .thumb_set GPIOB_IRQHandler,Default_Handler + + .weak DMA_IRQHandler + .thumb_set DMA_IRQHandler,Default_Handler + + .weak LPAWUR_IRQHandler + .thumb_set LPAWUR_IRQHandler,Default_Handler + + .weak COMP1_IRQHandler + .thumb_set COMP1_IRQHandler,Default_Handler + + .weak MRSUBG_BUSY_IRQHandler + .thumb_set MRSUBG_BUSY_IRQHandler,Default_Handler + + .weak MRSUBG_IRQHandler + .thumb_set MRSUBG_IRQHandler,Default_Handler + + .weak MRSUBG_TX_RX_SEQUENCE_IRQHandler + .thumb_set MRSUBG_TX_RX_SEQUENCE_IRQHandler,Default_Handler + + .weak MRSUBG_TIMER_CPU_WKUP_IRQHandler + .thumb_set MRSUBG_TIMER_CPU_WKUP_IRQHandler,Default_Handler + + .weak MRSUBG_WKUP_IRQHandler + .thumb_set MRSUBG_WKUP_IRQHandler,Default_Handler + + .weak DAC_IRQHandler + .thumb_set DAC_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak LCD_IRQHandler + .thumb_set LCD_IRQHandler,Default_Handler + + .weak LCSC_IRQHandler + .thumb_set LCSC_IRQHandler,Default_Handler + + .weak LCSC_LC_ACTIVITY_IRQHandler + .thumb_set LCSC_LC_ACTIVITY_IRQHandler,Default_Handler diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/system_stm32wl3x.c b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/system_stm32wl3x.c new file mode 100644 index 0000000000..c572cce21c --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/Source/Templates/system_stm32wl3x.c @@ -0,0 +1,352 @@ +/** + ****************************************************************************** + * @file system_stm32wl3x.c + * @author MCD Application Team + * @brief CMSIS Cortex Device Peripheral Access Layer System Source File + * + ****************************************************************************** + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32wl3x.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * After each device reset the HSI (64 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32wl3x.s" file, to + * configure the system clock before to branch to main program. + * + * This file configures the system clock as follows: + *============================================================================= + *----------------------------------------------------------------------------- + * System Clock source | HSI + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 16000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 16000000 + *----------------------------------------------------------------------------- + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup STM32WL3x_system + * @{ + */ + +/** @addtogroup STM32WL3x_System_Private_Includes + * @{ + */ + +#include "stm32wl3x.h" + +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_Defines + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (48000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE (64000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line if you need to relocate the vector table + anywhere in Flash or Sram, else the vector table is kept at the automatic + remap of boot address selected */ +/* #define USER_VECT_TAB_ADDRESS */ + +#if defined(USER_VECT_TAB_ADDRESS) +/*!< Uncomment the following line if you need to relocate your vector Table + in SRAM else user remap will be done in FLASH. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x100. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x100. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x100. */ +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x100. */ +#endif /* VECT_TAB_SRAM */ +#endif /* USER_VECT_TAB_ADDRESS */ + +/******************************************************************************/ + +/*!< HW TRIMMING Defines */ +#define VALIDITY_TAG 0xFCBCECCC /*!< TAG to validate the content of the + trimming area content. */ +#define VALIDITY_LOCATION 0x10001EF8 /*!< ROM address of the the validity trimming values content. */ + +/*!< SMPS Configuration Defines */ +#if !defined(CFG_HW_SMPS) +#define CFG_HW_SMPS SMPS_ON +#endif + +#if !defined(CFG_HW_SMPS_BOM) +#define CFG_HW_SMPS_BOM SMPS_BOM3 /*!< SMPS Inductor 10uH */ +#endif + +#if !defined(CFG_HW_SMPS_LOW_POWER) +#define CFG_HW_SMPS_LOW_POWER SMPS_LOW_POWER_OPEN +#endif + +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 16000000U; /* The HSI (64MHz) is used as system clock source after startup from reset, configured at 16 MHz. */ + + /* Crystal frequency */ + uint32_t HSE_xtalFrequency = HSE_VALUE; + + /* The RAM_VR variable is a mirroring in RAM of some registers information. + It is a sort of virtual register in RAM. + */ +#if defined ( __ICCARM__ ) + #pragma location=".ram_vr" + __root __no_init RAM_VR_TypeDef RAM_VR; +#else +#if defined ( __ARMCC_VERSION ) + __attribute__((section(".bss" ".ram_vr"))) +#elif defined ( __GNUC__ ) + __attribute__((section(".ram_vr"))) +#endif + RAM_VR_TypeDef RAM_VR __attribute__((used)); +#endif +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_FunctionPrototypes + * @{ + */ + +void CPUcontextRestore(void); + +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ + +void SystemInit(void) +{ + uint32_t mainRegulator, smpsOutVoltage, lsiBw, hsiCalib; + uint8_t i; + + /* If the reset reason is a wakeup from power save restore the context */ + if ((RCC->CSR == 0) && ((PWR->IWUF != 0) || (PWR->WUFA != 0) || (PWR->WUFB != 0))) + { + RAM_VR.WakeupFromSleepFlag = 1; /* A wakeup from power save occurred */ + CPUcontextRestore(); /* Restore the context */ + /* if the context restore worked properly, we should never return here */ + while(1) { + NVIC_SystemReset(); + } + } + + /* Configure the Vector Table location */ +#if defined(USER_VECT_TAB_ADDRESS) + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation */ +#else + SCB->VTOR = (uint32_t) (__vector_table); +#endif /* USER_VECT_TAB_ADDRESS */ + + /* Store in RAM the AppBase information */ + RAM_VR.AppBase = (uint32_t) SCB->VTOR; + + /* Enable all the RAM banks in retention during power save */ + SET_BIT(PWR->CR2, PWR_CR2_RAMRET1); + + /* Disable the GPIO retention in power save configuration */ + CLEAR_BIT(PWR->CR2, PWR_CR2_GPIORET); + + /* SMPS setup */ + if ((CFG_HW_SMPS == SMPS_ON) || (CFG_HW_SMPS == SMPS_STATIC_BOF) || (CFG_HW_SMPS == SMPS_DYNAMIC_BOF)) + { + while(READ_BIT(PWR->SR2, PWR_SR2_SMPSRDY) != PWR_SR2_SMPSRDY); // Wait until SMPS is ready + MODIFY_REG(PWR->CR5, PWR_CR5_SMPSBOMSEL, (CFG_HW_SMPS_BOM<CR5, PWR_CR5_NOSMPS, (CFG_HW_SMPS<CR5, PWR_CR5_NOSMPS_BOF); + CLEAR_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_DYN); + SET_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_STATIC); + } + if (CFG_HW_SMPS == SMPS_DYNAMIC_BOF) + { + /* The SMPS output voltage level and SMPS BOF tuning are set to 1.4V by default */ + SET_BIT(PWR->CR5, PWR_CR5_NOSMPS_BOF); + CLEAR_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_STATIC); + SET_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_DYN); + } + MODIFY_REG(PWR->CR5, PWR_CR5_SMPSLPOPEN, (CFG_HW_SMPS_LOW_POWER<CSSWCR, RCC_CSSWCR_HSITRIMSW, hsiCalib << RCC_CSSWCR_HSITRIMSW_Pos); + SET_BIT(RCC->CSSWCR, RCC_CSSWCR_HSISWTRIMEN); + + /* Low speed internal RC trimming value set by software */ + MODIFY_REG(RCC->CSSWCR, RCC_CSSWCR_LSISWBW, lsiBw << RCC_CSSWCR_LSISWBW_Pos); + SET_BIT(RCC->CSSWCR, RCC_CSSWCR_LSISWTRIMEN); + + /* Set Main Regulator voltage Trimming value */ + MODIFY_REG(PWR->ENGTRIM, PWR_ENGTRIM_TRIM_MR, ((mainRegulator << PWR_ENGTRIM_TRIM_MR_Pos) & PWR_ENGTRIM_TRIM_MR)); + SET_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIMMREN); + + /* Set SMPS output voltage Trimming value */ + MODIFY_REG(PWR->ENGTRIM, PWR_ENGTRIM_SMPS_TRIM, ((smpsOutVoltage << PWR_ENGTRIM_SMPS_TRIM_Pos) & PWR_ENGTRIM_SMPS_TRIM)); + SET_BIT(PWR->ENGTRIM, PWR_ENGTRIM_SMPSTRIMEN); + } + + /* Set all the interrupt with low priprity */ + for (i=0; i<32; i++) + { + NVIC_SetPriority((IRQn_Type)i, IRQ_LOW_PRIORITY); + } + + /* Enable all the irqs */ + __enable_irq(); +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint8_t directHSE_enabled; + uint8_t divPrescaler; + + /* Get SYSCLK source HSE or HSI+PLL64MHz */ + directHSE_enabled = (RCC->CFGR & RCC_CFGR_HSESEL) >> RCC_CFGR_HSESEL_Pos; + + /* Get the clock divider */ + divPrescaler = (RCC->CFGR & RCC_CFGR_CLKSYSDIV_STATUS) >> RCC_CFGR_CLKSYSDIV_STATUS_Pos; + + if (directHSE_enabled) + { + switch(divPrescaler) + { + case 0: + SystemCoreClock = HSE_VALUE; + break; + case 1: + SystemCoreClock = HSE_VALUE/2; + break; + default: + SystemCoreClock = HSE_VALUE/(3*(1<<(divPrescaler-2))); + break; + } + } + else + { + SystemCoreClock = HSI_VALUE >> divPrescaler; + } +} + +/** + * @brief Restores the saved CPU state before to enter in power save + * by popping it from the stack + * @param None + * @retval None + */ +__WEAK void CPUcontextRestore(void) +{ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/Add button.svg b/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/Add button.svg new file mode 100644 index 0000000000..c211545dad --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/Add button.svg @@ -0,0 +1,2 @@ + + diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/Update.svg b/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/Update.svg new file mode 100644 index 0000000000..f88381f1e6 --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/Update.svg @@ -0,0 +1,2 @@ + + diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/favicon.png b/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/favicon.png new file mode 100644 index 0000000000..06713eec49 Binary files /dev/null and b/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/favicon.png differ diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/mini-st_2020.css b/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/mini-st_2020.css new file mode 100644 index 0000000000..db8b406aa4 --- /dev/null +++ b/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/mini-st_2020.css @@ -0,0 +1,1711 @@ +@charset "UTF-8"; +/* + Flavor name: Custom (mini-custom) + Generated online - https://minicss.org/flavors + mini.css version: v3.0.1 +*/ +/* + Browsers resets and base typography. +*/ +/* Core module CSS variable definitions */ +:root { + --fore-color: #03234b; + --secondary-fore-color: #03234b; + --back-color: #ffffff; + --secondary-back-color: #ffffff; + --blockquote-color: #e6007e; + --pre-color: #e6007e; + --border-color: #3cb4e6; + --secondary-border-color: #3cb4e6; + --heading-ratio: 1.2; + --universal-margin: 0.5rem; + --universal-padding: 0.25rem; + --universal-border-radius: 0.075rem; + --background-margin: 1.5%; + --a-link-color: #3cb4e6; + --a-visited-color: #8c0078; } + +html { + font-size: 13.5px; } + +a, b, del, em, i, ins, q, span, strong, u { + font-size: 1em; } + +html, * { + font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; + line-height: 1.25; + -webkit-text-size-adjust: 100%; } + +* { + font-size: 1rem; } + +body { + margin: 0; + color: var(--fore-color); + @background: var(--back-color); + background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; + background-size: var(--background-margin); + } + +details { + display: block; } + +summary { + display: list-item; } + +abbr[title] { + border-bottom: none; + text-decoration: underline dotted; } + +input { + overflow: visible; } + +img { + max-width: 100%; + height: auto; } + +h1, h2, h3, h4, h5, h6 { + line-height: 1.25; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + font-weight: 400; } + h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { + color: var(--secondary-fore-color); + display: block; + margin-top: -0.25rem; } + +h1 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } + +h2 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); + border-style: none none solid none ; + border-width: thin; + border-color: var(--border-color); } +h3 { + font-size: calc(1rem * var(--heading-ratio) ); } + +h4 { + font-size: calc(1rem * var(--heading-ratio)); } + +h5 { + font-size: 1rem; } + +h6 { + font-size: calc(1rem / var(--heading-ratio)); } + +p { + margin: var(--universal-margin); } + +ol, ul { + margin: var(--universal-margin); + padding-left: calc(3 * var(--universal-margin)); } + +b, strong { + font-weight: 700; } + +hr { + box-sizing: content-box; + border: 0; + line-height: 1.25em; + margin: var(--universal-margin); + height: 0.0714285714rem; + background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } + +blockquote { + display: block; + position: relative; + font-style: italic; + color: var(--secondary-fore-color); + margin: var(--universal-margin); + padding: calc(3 * var(--universal-padding)); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.3rem solid var(--blockquote-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + blockquote:before { + position: absolute; + top: calc(0rem - var(--universal-padding)); + left: 0; + font-family: sans-serif; + font-size: 2rem; + font-weight: 800; + content: "\201c"; + color: var(--blockquote-color); } + blockquote[cite]:after { + font-style: normal; + font-size: 0.75em; + font-weight: 700; + content: "\a— " attr(cite); + white-space: pre; } + +code, kbd, pre, samp { + font-family: Menlo, Consolas, monospace; + font-size: 0.85em; } + +code { + background: var(--secondary-back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +kbd { + background: var(--fore-color); + color: var(--back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +pre { + overflow: auto; + background: var(--secondary-back-color); + padding: calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.2857142857rem solid var(--pre-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + +sup, sub, code, kbd { + line-height: 0; + position: relative; + vertical-align: baseline; } + +small, sup, sub, figcaption { + font-size: 0.75em; } + +sup { + top: -0.5em; } + +sub { + bottom: -0.25em; } + +figure { + margin: var(--universal-margin); } + +figcaption { + color: var(--secondary-fore-color); } + +a { + text-decoration: none; } + a:link { + color: var(--a-link-color); } + a:visited { + color: var(--a-visited-color); } + a:hover, a:focus { + text-decoration: underline; } + +/* + Definitions for the grid system, cards and containers. +*/ +.container { + margin: 0 auto; + padding: 0 calc(1.5 * var(--universal-padding)); } + +.row { + box-sizing: border-box; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + margin: 0 0 0 var(--background-margin); } + +.col-sm, +[class^='col-sm-'], +[class^='col-sm-offset-'], +.row[class*='cols-sm-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + +.col-sm, +.row.cols-sm > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + +.col-sm-1, +.row.cols-sm-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + +.col-sm-offset-0 { + margin-left: 0; } + +.col-sm-2, +.row.cols-sm-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + +.col-sm-offset-1 { + margin-left: 8.3333333333%; } + +.col-sm-3, +.row.cols-sm-3 > * { + max-width: 25%; + flex-basis: 25%; } + +.col-sm-offset-2 { + margin-left: 16.6666666667%; } + +.col-sm-4, +.row.cols-sm-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + +.col-sm-offset-3 { + margin-left: 25%; } + +.col-sm-5, +.row.cols-sm-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + +.col-sm-offset-4 { + margin-left: 33.3333333333%; } + +.col-sm-6, +.row.cols-sm-6 > * { + max-width: 50%; + flex-basis: 50%; } + +.col-sm-offset-5 { + margin-left: 41.6666666667%; } + +.col-sm-7, +.row.cols-sm-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + +.col-sm-offset-6 { + margin-left: 50%; } + +.col-sm-8, +.row.cols-sm-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + +.col-sm-offset-7 { + margin-left: 58.3333333333%; } + +.col-sm-9, +.row.cols-sm-9 > * { + max-width: 75%; + flex-basis: 75%; } + +.col-sm-offset-8 { + margin-left: 66.6666666667%; } + +.col-sm-10, +.row.cols-sm-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + +.col-sm-offset-9 { + margin-left: 75%; } + +.col-sm-11, +.row.cols-sm-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + +.col-sm-offset-10 { + margin-left: 83.3333333333%; } + +.col-sm-12, +.row.cols-sm-12 > * { + max-width: 100%; + flex-basis: 100%; } + +.col-sm-offset-11 { + margin-left: 91.6666666667%; } + +.col-sm-normal { + order: initial; } + +.col-sm-first { + order: -999; } + +.col-sm-last { + order: 999; } + +@media screen and (min-width: 500px) { + .col-md, + [class^='col-md-'], + [class^='col-md-offset-'], + .row[class*='cols-md-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-md, + .row.cols-md > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-md-1, + .row.cols-md-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-md-offset-0 { + margin-left: 0; } + + .col-md-2, + .row.cols-md-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-md-offset-1 { + margin-left: 8.3333333333%; } + + .col-md-3, + .row.cols-md-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-md-offset-2 { + margin-left: 16.6666666667%; } + + .col-md-4, + .row.cols-md-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-md-offset-3 { + margin-left: 25%; } + + .col-md-5, + .row.cols-md-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-md-offset-4 { + margin-left: 33.3333333333%; } + + .col-md-6, + .row.cols-md-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-md-offset-5 { + margin-left: 41.6666666667%; } + + .col-md-7, + .row.cols-md-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-md-offset-6 { + margin-left: 50%; } + + .col-md-8, + .row.cols-md-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-md-offset-7 { + margin-left: 58.3333333333%; } + + .col-md-9, + .row.cols-md-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-md-offset-8 { + margin-left: 66.6666666667%; } + + .col-md-10, + .row.cols-md-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-md-offset-9 { + margin-left: 75%; } + + .col-md-11, + .row.cols-md-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-md-offset-10 { + margin-left: 83.3333333333%; } + + .col-md-12, + .row.cols-md-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-md-offset-11 { + margin-left: 91.6666666667%; } + + .col-md-normal { + order: initial; } + + .col-md-first { + order: -999; } + + .col-md-last { + order: 999; } } +@media screen and (min-width: 1280px) { + .col-lg, + [class^='col-lg-'], + [class^='col-lg-offset-'], + .row[class*='cols-lg-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-lg, + .row.cols-lg > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-lg-1, + .row.cols-lg-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-lg-offset-0 { + margin-left: 0; } + + .col-lg-2, + .row.cols-lg-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-lg-offset-1 { + margin-left: 8.3333333333%; } + + .col-lg-3, + .row.cols-lg-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-lg-offset-2 { + margin-left: 16.6666666667%; } + + .col-lg-4, + .row.cols-lg-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-lg-offset-3 { + margin-left: 25%; } + + .col-lg-5, + .row.cols-lg-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-lg-offset-4 { + margin-left: 33.3333333333%; } + + .col-lg-6, + .row.cols-lg-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-lg-offset-5 { + margin-left: 41.6666666667%; } + + .col-lg-7, + .row.cols-lg-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-lg-offset-6 { + margin-left: 50%; } + + .col-lg-8, + .row.cols-lg-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-lg-offset-7 { + margin-left: 58.3333333333%; } + + .col-lg-9, + .row.cols-lg-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-lg-offset-8 { + margin-left: 66.6666666667%; } + + .col-lg-10, + .row.cols-lg-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-lg-offset-9 { + margin-left: 75%; } + + .col-lg-11, + .row.cols-lg-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-lg-offset-10 { + margin-left: 83.3333333333%; } + + .col-lg-12, + .row.cols-lg-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-lg-offset-11 { + margin-left: 91.6666666667%; } + + .col-lg-normal { + order: initial; } + + .col-lg-first { + order: -999; } + + .col-lg-last { + order: 999; } } +/* Card component CSS variable definitions */ +:root { + --card-back-color: #3cb4e6; + --card-fore-color: #03234b; + --card-border-color: #03234b; } + +.card { + display: flex; + flex-direction: column; + justify-content: space-between; + align-self: center; + position: relative; + width: 100%; + background: var(--card-back-color); + color: var(--card-fore-color); + border: 0.0714285714rem solid var(--card-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + overflow: hidden; } + @media screen and (min-width: 320px) { + .card { + max-width: 320px; } } + .card > .sectione { + background: var(--card-back-color); + color: var(--card-fore-color); + box-sizing: border-box; + margin: 0; + border: 0; + border-radius: 0; + border-bottom: 0.0714285714rem solid var(--card-border-color); + padding: var(--universal-padding); + width: 100%; } + .card > .sectione.media { + height: 200px; + padding: 0; + -o-object-fit: cover; + object-fit: cover; } + .card > .sectione:last-child { + border-bottom: 0; } + +/* + Custom elements for card elements. +*/ +@media screen and (min-width: 240px) { + .card.small { + max-width: 240px; } } +@media screen and (min-width: 480px) { + .card.large { + max-width: 480px; } } +.card.fluid { + max-width: 100%; + width: auto; } + +.card.warning { + --card-back-color: #e5b8b7; + --card-fore-color: #3b234b; + --card-border-color: #8c0078; } + +.card.error { + --card-back-color: #464650; + --card-fore-color: #ffffff; + --card-border-color: #8c0078; } + +.card > .sectione.dark { + --card-back-color: #3b234b; + --card-fore-color: #ffffff; } + +.card > .sectione.double-padded { + padding: calc(1.5 * var(--universal-padding)); } + +/* + Definitions for forms and input elements. +*/ +/* Input_control module CSS variable definitions */ +:root { + --form-back-color: #ffe97f; + --form-fore-color: #03234b; + --form-border-color: #3cb4e6; + --input-back-color: #ffffff; + --input-fore-color: #03234b; + --input-border-color: #3cb4e6; + --input-focus-color: #0288d1; + --input-invalid-color: #d32f2f; + --button-back-color: #e2e2e2; + --button-hover-back-color: #dcdcdc; + --button-fore-color: #212121; + --button-border-color: transparent; + --button-hover-border-color: transparent; + --button-group-border-color: rgba(124, 124, 124, 0.54); } + +form { + background: var(--form-back-color); + color: var(--form-fore-color); + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); } + +fieldset { + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 4); + padding: var(--universal-padding); } + +legend { + box-sizing: border-box; + display: table; + max-width: 100%; + white-space: normal; + font-weight: 500; + padding: calc(var(--universal-padding) / 2); } + +label { + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +.input-group { + display: inline-block; } + .input-group.fluid { + display: flex; + align-items: center; + justify-content: center; } + .input-group.fluid > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + @media screen and (max-width: 499px) { + .input-group.fluid { + align-items: stretch; + flex-direction: column; } } + .input-group.vertical { + display: flex; + align-items: stretch; + flex-direction: column; } + .input-group.vertical > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + +[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { + height: auto; } + +[type="search"] { + -webkit-appearance: textfield; + outline-offset: -2px; } + +[type="search"]::-webkit-search-cancel-button, +[type="search"]::-webkit-search-decoration { + -webkit-appearance: none; } + +input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], +[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { + box-sizing: border-box; + background: var(--input-back-color); + color: var(--input-fore-color); + border: 0.0714285714rem solid var(--input-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 2); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + +input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { + border-color: var(--input-focus-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { + border-color: var(--input-invalid-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { + background: var(--secondary-back-color); } + +select { + max-width: 100%; } + +option { + overflow: hidden; + text-overflow: ellipsis; } + +[type="checkbox"], [type="radio"] { + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + position: relative; + height: calc(1rem + var(--universal-padding) / 2); + width: calc(1rem + var(--universal-padding) / 2); + vertical-align: text-bottom; + padding: 0; + flex-basis: calc(1rem + var(--universal-padding) / 2) !important; + flex-grow: 0 !important; } + [type="checkbox"]:checked:before, [type="radio"]:checked:before { + position: absolute; } + +[type="checkbox"]:checked:before { + content: '\2713'; + font-family: sans-serif; + font-size: calc(1rem + var(--universal-padding) / 2); + top: calc(0rem - var(--universal-padding)); + left: calc(var(--universal-padding) / 4); } + +[type="radio"] { + border-radius: 100%; } + [type="radio"]:checked:before { + border-radius: 100%; + content: ''; + top: calc(0.0714285714rem + var(--universal-padding) / 2); + left: calc(0.0714285714rem + var(--universal-padding) / 2); + background: var(--input-fore-color); + width: 0.5rem; + height: 0.5rem; } + +:placeholder-shown { + color: var(--input-fore-color); } + +::-ms-placeholder { + color: var(--input-fore-color); + opacity: 0.54; } + +button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { + border-style: none; + padding: 0; } + +button, html [type="button"], [type="reset"], [type="submit"] { + -webkit-appearance: button; } + +button { + overflow: visible; + text-transform: none; } + +button, [type="button"], [type="submit"], [type="reset"], +a.button, label.button, .button, +a[role="button"], label[role="button"], [role="button"] { + display: inline-block; + background: var(--button-back-color); + color: var(--button-fore-color); + border: 0.0714285714rem solid var(--button-border-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + text-decoration: none; + cursor: pointer; + transition: background 0.3s; } + button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, + a.button:hover, + a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, + a[role="button"]:hover, + a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { + background: var(--button-hover-back-color); + border-color: var(--button-hover-border-color); } + +input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { + cursor: not-allowed; + opacity: 0.75; } + +.button-group { + display: flex; + border: 0.0714285714rem solid var(--button-group-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { + margin: 0; + max-width: 100%; + flex: 1 1 auto; + text-align: center; + border: 0; + border-radius: 0; + box-shadow: none; } + .button-group > :not(:first-child) { + border-left: 0.0714285714rem solid var(--button-group-border-color); } + @media screen and (max-width: 499px) { + .button-group { + flex-direction: column; } + .button-group > :not(:first-child) { + border: 0; + border-top: 0.0714285714rem solid var(--button-group-border-color); } } + +/* + Custom elements for forms and input elements. +*/ +button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { + --button-back-color: #1976d2; + --button-fore-color: #f8f8f8; } + button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { + --button-hover-back-color: #1565c0; } + +button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { + --button-back-color: #d32f2f; + --button-fore-color: #f8f8f8; } + button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { + --button-hover-back-color: #c62828; } + +button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { + --button-back-color: #308732; + --button-fore-color: #f8f8f8; } + button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { + --button-hover-back-color: #277529; } + +button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { + --button-back-color: #212121; + --button-fore-color: #f8f8f8; } + button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { + --button-hover-back-color: #111; } + +button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { + padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); + margin: var(--universal-margin); } + +button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { + padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); + margin: var(--universal-margin); } + +/* + Definitions for navigation elements. +*/ +/* Navigation module CSS variable definitions */ +:root { + --header-back-color: #03234b; + --header-hover-back-color: #ffd200; + --header-fore-color: #ffffff; + --header-border-color: #3cb4e6; + --nav-back-color: #ffffff; + --nav-hover-back-color: #ffe97f; + --nav-fore-color: #e6007e; + --nav-border-color: #3cb4e6; + --nav-link-color: #3cb4e6; + --footer-fore-color: #ffffff; + --footer-back-color: #03234b; + --footer-border-color: #3cb4e6; + --footer-link-color: #3cb4e6; + --drawer-back-color: #ffffff; + --drawer-hover-back-color: #ffe97f; + --drawer-border-color: #3cb4e6; + --drawer-close-color: #e6007e; } + +header { + height: 2.75rem; + background: var(--header-back-color); + color: var(--header-fore-color); + border-bottom: 0.0714285714rem solid var(--header-border-color); + padding: calc(var(--universal-padding) / 4) 0; + white-space: nowrap; + overflow-x: auto; + overflow-y: hidden; } + header.row { + box-sizing: content-box; } + header .logo { + color: var(--header-fore-color); + font-size: 1.75rem; + padding: var(--universal-padding) calc(2 * var(--universal-padding)); + text-decoration: none; } + header button, header [type="button"], header .button, header [role="button"] { + box-sizing: border-box; + position: relative; + top: calc(0rem - var(--universal-padding) / 4); + height: calc(3.1875rem + var(--universal-padding) / 2); + background: var(--header-back-color); + line-height: calc(3.1875rem - var(--universal-padding) * 1.5); + text-align: center; + color: var(--header-fore-color); + border: 0; + border-radius: 0; + margin: 0; + text-transform: uppercase; } + header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { + background: var(--header-hover-back-color); } + +nav { + background: var(--nav-back-color); + color: var(--nav-fore-color); + border: 0.0714285714rem solid var(--nav-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + nav * { + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + nav a, nav a:visited { + display: block; + color: var(--nav-link-color); + border-radius: var(--universal-border-radius); + transition: background 0.3s; } + nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { + text-decoration: none; + background: var(--nav-hover-back-color); } + nav .sublink-1 { + position: relative; + margin-left: calc(2 * var(--universal-padding)); } + nav .sublink-1:before { + position: absolute; + left: calc(var(--universal-padding) - 1 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + nav .sublink-2 { + position: relative; + margin-left: calc(4 * var(--universal-padding)); } + nav .sublink-2:before { + position: absolute; + left: calc(var(--universal-padding) - 3 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + +footer { + background: var(--footer-back-color); + color: var(--footer-fore-color); + border-top: 0.0714285714rem solid var(--footer-border-color); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); + font-size: 0.875rem; } + footer a, footer a:visited { + color: var(--footer-link-color); } + +header.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + top: 0; } + +footer.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + bottom: 0; } + +.drawer-toggle:before { + display: inline-block; + position: relative; + vertical-align: bottom; + content: '\00a0\2261\00a0'; + font-family: sans-serif; + font-size: 1.5em; } +@media screen and (min-width: 500px) { + .drawer-toggle:not(.persistent) { + display: none; } } + +[type="checkbox"].drawer { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].drawer + * { + display: block; + box-sizing: border-box; + position: fixed; + top: 0; + width: 320px; + height: 100vh; + overflow-y: auto; + background: var(--drawer-back-color); + border: 0.0714285714rem solid var(--drawer-border-color); + border-radius: 0; + margin: 0; + z-index: 1110; + right: -320px; + transition: right 0.3s; } + [type="checkbox"].drawer + * .drawer-close { + position: absolute; + top: var(--universal-margin); + right: var(--universal-margin); + z-index: 1111; + width: 2rem; + height: 2rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].drawer + * .drawer-close:before { + display: block; + content: '\00D7'; + color: var(--drawer-close-color); + position: relative; + font-family: sans-serif; + font-size: 2rem; + line-height: 1; + text-align: center; } + [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { + background: var(--drawer-hover-back-color); } + @media screen and (max-width: 320px) { + [type="checkbox"].drawer + * { + width: 100%; } } + [type="checkbox"].drawer:checked + * { + right: 0; } + @media screen and (min-width: 500px) { + [type="checkbox"].drawer:not(.persistent) + * { + position: static; + height: 100%; + z-index: 1100; } + [type="checkbox"].drawer:not(.persistent) + * .drawer-close { + display: none; } } + +/* + Definitions for the responsive table component. +*/ +/* Table module CSS variable definitions. */ +:root { + --table-border-color: #03234b; + --table-border-separator-color: #03234b; + --table-head-back-color: #03234b; + --table-head-fore-color: #ffffff; + --table-body-back-color: #ffffff; + --table-body-fore-color: #03234b; + --table-body-alt-back-color: #f4f4f4; } + +table { + border-collapse: separate; + border-spacing: 0; + margin: 0; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + padding: var(--universal-padding); + padding-top: 0; } + table caption { + font-size: 1rem; + margin: calc(2 * var(--universal-margin)) 0; + max-width: 100%; + flex: 0 0 100%; } + table thead, table tbody { + display: flex; + flex-flow: row wrap; + border: 0.0714285714rem solid var(--table-border-color); } + table thead { + z-index: 999; + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; + border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } + table tbody { + border-top: 0; + margin-top: calc(0 - var(--universal-margin)); + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + table tr { + display: flex; + padding: 0; } + table th, table td { + padding: calc(0.5 * var(--universal-padding)); + font-size: 0.9rem; } + table th { + text-align: left; + background: var(--table-head-back-color); + color: var(--table-head-fore-color); } + table td { + background: var(--table-body-back-color); + color: var(--table-body-fore-color); + border-top: 0.0714285714rem solid var(--table-border-color); } + +table:not(.horizontal) { + overflow: auto; + max-height: 100%; } + table:not(.horizontal) thead, table:not(.horizontal) tbody { + max-width: 100%; + flex: 0 0 100%; } + table:not(.horizontal) tr { + flex-flow: row wrap; + flex: 0 0 100%; } + table:not(.horizontal) th, table:not(.horizontal) td { + flex: 1 0 0%; + overflow: hidden; + text-overflow: ellipsis; } + table:not(.horizontal) thead { + position: sticky; + top: 0; } + table:not(.horizontal) tbody tr:first-child td { + border-top: 0; } + +table.horizontal { + border: 0; } + table.horizontal thead, table.horizontal tbody { + border: 0; + flex: .2 0 0; + flex-flow: row nowrap; } + table.horizontal tbody { + overflow: auto; + justify-content: space-between; + flex: .8 0 0; + margin-left: 0; + padding-bottom: calc(var(--universal-padding) / 4); } + table.horizontal tr { + flex-direction: column; + flex: 1 0 auto; } + table.horizontal th, table.horizontal td { + width: auto; + border: 0; + border-bottom: 0.0714285714rem solid var(--table-border-color); } + table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { + border-top: 0; } + table.horizontal th { + text-align: right; + border-left: 0.0714285714rem solid var(--table-border-color); + border-right: 0.0714285714rem solid var(--table-border-separator-color); } + table.horizontal thead tr:first-child { + padding-left: 0; } + table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td { + border-right: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td:first-child { + border-top-right-radius: 0.25rem; } + table.horizontal tbody tr:last-child td:last-child { + border-bottom-right-radius: 0.25rem; } + table.horizontal thead tr:first-child th:first-child { + border-top-left-radius: 0.25rem; } + table.horizontal thead tr:first-child th:last-child { + border-bottom-left-radius: 0.25rem; } + +@media screen and (max-width: 499px) { + table, table.horizontal { + border-collapse: collapse; + border: 0; + width: 100%; + display: table; } + table thead, table th, table.horizontal thead, table.horizontal th { + border: 0; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + padding: 0; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + table tbody, table.horizontal tbody { + border: 0; + display: table-row-group; } + table tr, table.horizontal tr { + display: block; + border: 0.0714285714rem solid var(--table-border-color); + border-radius: var(--universal-border-radius); + background: #ffffff; + padding: var(--universal-padding); + margin: var(--universal-margin); + margin-bottom: calc(1 * var(--universal-margin)); } + table th, table td, table.horizontal th, table.horizontal td { + width: auto; } + table td, table.horizontal td { + display: block; + border: 0; + text-align: right; } + table td:before, table.horizontal td:before { + content: attr(data-label); + float: left; + font-weight: 600; } + table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0; } + table tbody tr:last-child td, table.horizontal tbody tr:last-child td { + border-right: 0; } } +table tr:nth-of-type(2n) > td { + background: var(--table-body-alt-back-color); } + +@media screen and (max-width: 500px) { + table tr:nth-of-type(2n) { + background: var(--table-body-alt-back-color); } } +:root { + --table-body-hover-back-color: #90caf9; } + +table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } + +@media screen and (max-width: 500px) { + table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } } +/* + Definitions for contextual background elements, toasts and tooltips. +*/ +/* Contextual module CSS variable definitions */ +:root { + --mark-back-color: #3cb4e6; + --mark-fore-color: #ffffff; } + +mark { + background: var(--mark-back-color); + color: var(--mark-fore-color); + font-size: 0.95em; + line-height: 1em; + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) var(--universal-padding); } + mark.inline-block { + display: inline-block; + font-size: 1em; + line-height: 1.4; + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +:root { + --toast-back-color: #424242; + --toast-fore-color: #fafafa; } + +.toast { + position: fixed; + bottom: calc(var(--universal-margin) * 3); + left: 50%; + transform: translate(-50%, -50%); + z-index: 1111; + color: var(--toast-fore-color); + background: var(--toast-back-color); + border-radius: calc(var(--universal-border-radius) * 16); + padding: var(--universal-padding) calc(var(--universal-padding) * 3); } + +:root { + --tooltip-back-color: #212121; + --tooltip-fore-color: #fafafa; } + +.tooltip { + position: relative; + display: inline-block; } + .tooltip:before, .tooltip:after { + position: absolute; + opacity: 0; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: all 0.3s; + z-index: 1010; + left: 50%; } + .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { + bottom: 75%; } + .tooltip.bottom:before, .tooltip.bottom:after { + top: 75%; } + .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { + opacity: 1; + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); } + .tooltip:before { + content: ''; + background: transparent; + border: var(--universal-margin) solid transparent; + left: calc(50% - var(--universal-margin)); } + .tooltip:not(.bottom):before { + border-top-color: #212121; } + .tooltip.bottom:before { + border-bottom-color: #212121; } + .tooltip:after { + content: attr(aria-label); + color: var(--tooltip-fore-color); + background: var(--tooltip-back-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + white-space: nowrap; + transform: translateX(-50%); } + .tooltip:not(.bottom):after { + margin-bottom: calc(2 * var(--universal-margin)); } + .tooltip.bottom:after { + margin-top: calc(2 * var(--universal-margin)); } + +:root { + --modal-overlay-color: rgba(0, 0, 0, 0.45); + --modal-close-color: #e6007e; + --modal-close-hover-color: #ffe97f; } + +[type="checkbox"].modal { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].modal + div { + position: fixed; + top: 0; + left: 0; + display: none; + width: 100vw; + height: 100vh; + background: var(--modal-overlay-color); } + [type="checkbox"].modal + div .card { + margin: 0 auto; + max-height: 50vh; + overflow: auto; } + [type="checkbox"].modal + div .card .modal-close { + position: absolute; + top: 0; + right: 0; + width: 1.75rem; + height: 1.75rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].modal + div .card .modal-close:before { + display: block; + content: '\00D7'; + color: var(--modal-close-color); + position: relative; + font-family: sans-serif; + font-size: 1.75rem; + line-height: 1; + text-align: center; } + [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { + background: var(--modal-close-hover-color); } + [type="checkbox"].modal:checked + div { + display: flex; + flex: 0 1 auto; + z-index: 1200; } + [type="checkbox"].modal:checked + div .card .modal-close { + z-index: 1211; } + +:root { + --collapse-label-back-color: #03234b; + --collapse-label-fore-color: #ffffff; + --collapse-label-hover-back-color: #3cb4e6; + --collapse-selected-label-back-color: #3cb4e6; + --collapse-border-color: var(--collapse-label-back-color); + --collapse-selected-border-color: #ceecf8; + --collapse-content-back-color: #ffffff; + --collapse-selected-label-border-color: #3cb4e6; } + +.collapse { + width: calc(100% - 2 * var(--universal-margin)); + opacity: 1; + display: flex; + flex-direction: column; + margin: var(--universal-margin); + border-radius: var(--universal-border-radius); } + .collapse > [type="radio"], .collapse > [type="checkbox"] { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + .collapse > label { + flex-grow: 1; + display: inline-block; + height: 1.25rem; + cursor: pointer; + transition: background 0.2s; + color: var(--collapse-label-fore-color); + background: var(--collapse-label-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + padding: calc(1.25 * var(--universal-padding)); } + .collapse > label:hover, .collapse > label:focus { + background: var(--collapse-label-hover-back-color); } + .collapse > label + div { + flex-basis: auto; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: max-height 0.3s; + max-height: 1px; } + .collapse > :checked + label { + background: var(--collapse-selected-label-back-color); + border-color: var(--collapse-selected-label-border-color); } + .collapse > :checked + label + div { + box-sizing: border-box; + position: relative; + width: 100%; + height: auto; + overflow: auto; + margin: 0; + background: var(--collapse-content-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + border-top: 0; + padding: var(--universal-padding); + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); + max-height: 100%; } + .collapse > label:not(:first-of-type) { + border-top: 0; } + .collapse > label:first-of-type { + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } + .collapse > label:last-of-type:not(:first-of-type) { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + .collapse > label:last-of-type:first-of-type { + border-radius: var(--universal-border-radius); } + .collapse > :checked:last-of-type:not(:first-of-type) + label { + border-radius: 0; } + .collapse > :checked:last-of-type + label + div { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + +/* + Custom elements for contextual background elements, toasts and tooltips. +*/ +mark.tertiary { + --mark-back-color: #3cb4e6; } + +mark.tag { + padding: calc(var(--universal-padding)/2) var(--universal-padding); + border-radius: 1em; } + +/* + Definitions for progress elements and spinners. +*/ +/* Progress module CSS variable definitions */ +:root { + --progress-back-color: #3cb4e6; + --progress-fore-color: #555; } + +progress { + display: block; + vertical-align: baseline; + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + height: 0.75rem; + width: calc(100% - 2 * var(--universal-margin)); + margin: var(--universal-margin); + border: 0; + border-radius: calc(2 * var(--universal-border-radius)); + background: var(--progress-back-color); + color: var(--progress-fore-color); } + progress::-webkit-progress-value { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress::-webkit-progress-bar { + background: var(--progress-back-color); } + progress::-moz-progress-bar { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-webkit-progress-value { + border-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-moz-progress-bar { + border-radius: calc(2 * var(--universal-border-radius)); } + progress.inline { + display: inline-block; + vertical-align: middle; + width: 60%; } + +:root { + --spinner-back-color: #ddd; + --spinner-fore-color: #555; } + +@keyframes spinner-donut-anim { + 0% { + transform: rotate(0deg); } + 100% { + transform: rotate(360deg); } } +.spinner { + display: inline-block; + margin: var(--universal-margin); + border: 0.25rem solid var(--spinner-back-color); + border-left: 0.25rem solid var(--spinner-fore-color); + border-radius: 50%; + width: 1.25rem; + height: 1.25rem; + animation: spinner-donut-anim 1.2s linear infinite; } + +/* + Custom elements for progress bars and spinners. +*/ +progress.primary { + --progress-fore-color: #1976d2; } + +progress.secondary { + --progress-fore-color: #d32f2f; } + +progress.tertiary { + --progress-fore-color: #308732; } + +.spinner.primary { + --spinner-fore-color: #1976d2; } + +.spinner.secondary { + --spinner-fore-color: #d32f2f; } + +.spinner.tertiary { + --spinner-fore-color: #308732; } + +/* + Definitions for icons - powered by Feather (https://feathericons.com/). +*/ +span[class^='icon-'] { + display: inline-block; + height: 1em; + width: 1em; + vertical-align: -0.125em; + background-size: contain; + margin: 0 calc(var(--universal-margin) / 4); } + span[class^='icon-'].secondary { + -webkit-filter: invert(25%); + filter: invert(25%); } + span[class^='icon-'].inverse { + -webkit-filter: invert(100%); + filter: invert(100%); } + +span.icon-alert { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-bookmark { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-calendar { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-credit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-edit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } +span.icon-link { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-help { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-home { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-info { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-lock { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-mail { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-location { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-phone { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-rss { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-search { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-settings { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-share { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-cart { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-upload { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-user { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } + +/* + Definitions for STMicroelectronics icons (https://brandportal.st.com/document/26). +*/ +span.icon-st-update { + background-image: url("Update.svg"); } +span.icon-st-add { + background-image: url("Add button.svg"); } + +/* + Definitions for utilities and helper classes. +*/ +/* Utility module CSS variable definitions */ +:root { + --generic-border-color: rgba(0, 0, 0, 0.3); + --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } + +.hidden { + display: none !important; } + +.visually-hidden { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } + +.bordered { + border: 0.0714285714rem solid var(--generic-border-color) !important; } + +.rounded { + border-radius: var(--universal-border-radius) !important; } + +.circular { + border-radius: 50% !important; } + +.shadowed { + box-shadow: var(--generic-box-shadow) !important; } + +.responsive-margin { + margin: calc(var(--universal-margin) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-margin { + margin: calc(var(--universal-margin) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-margin { + margin: var(--universal-margin) !important; } } + +.responsive-padding { + padding: calc(var(--universal-padding) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-padding { + padding: calc(var(--universal-padding) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-padding { + padding: var(--universal-padding) !important; } } + +@media screen and (max-width: 499px) { + .hidden-sm { + display: none !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .hidden-md { + display: none !important; } } +@media screen and (min-width: 1280px) { + .hidden-lg { + display: none !important; } } +@media screen and (max-width: 499px) { + .visually-hidden-sm { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .visually-hidden-md { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 1280px) { + .visually-hidden-lg { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } + +/*# sourceMappingURL=mini-custom.css.map */ + +img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } +img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} + +.figure { + display: block; + margin-left: auto; + margin-right: auto; + text-align: center; +} \ No newline at end of file diff --git a/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/st_logo_2020.png b/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/st_logo_2020.png new file mode 100644 index 0000000000..d6cebb5ac7 Binary files /dev/null and b/system/Drivers/CMSIS/Device/ST/STM32WL3x/_htmresc/st_logo_2020.png differ diff --git a/system/Drivers/CMSIS/Device/ST/STM32YYxx_CMSIS_version.md b/system/Drivers/CMSIS/Device/ST/STM32YYxx_CMSIS_version.md index 46e2f4a7c0..c7b748d11d 100644 --- a/system/Drivers/CMSIS/Device/ST/STM32YYxx_CMSIS_version.md +++ b/system/Drivers/CMSIS/Device/ST/STM32YYxx_CMSIS_version.md @@ -23,6 +23,7 @@ * STM32WB0: 1.3.0 * STM32WBA: 1.7.0 * STM32WL: 1.2.0 + * STM32WL3: 1.2.0 Release notes of each STM32YYxx CMSIS available here: diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h new file mode 100644 index 0000000000..7d18636efb --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h @@ -0,0 +1,4415 @@ +/** + ****************************************************************************** + * @file stm32_hal_legacy.h + * @author MCD Application Team + * @brief This file contains aliases definition for the STM32Cube HAL constants + * macros and functions maintained for legacy purpose. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_HAL_LEGACY +#define STM32_HAL_LEGACY + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose + * @{ + */ +#define AES_FLAG_RDERR CRYP_FLAG_RDERR +#define AES_FLAG_WRERR CRYP_FLAG_WRERR +#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF +#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR +#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR +#if defined(STM32H7) || defined(STM32MP1) +#define CRYP_DATATYPE_32B CRYP_NO_SWAP +#define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP +#define CRYP_DATATYPE_8B CRYP_BYTE_SWAP +#define CRYP_DATATYPE_1B CRYP_BIT_SWAP +#endif /* STM32H7 || STM32MP1 */ +/** + * @} + */ + +/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose + * @{ + */ +#define ADC_RESOLUTION12b ADC_RESOLUTION_12B +#define ADC_RESOLUTION10b ADC_RESOLUTION_10B +#define ADC_RESOLUTION8b ADC_RESOLUTION_8B +#define ADC_RESOLUTION6b ADC_RESOLUTION_6B +#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN +#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED +#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV +#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV +#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV +#define REGULAR_GROUP ADC_REGULAR_GROUP +#define INJECTED_GROUP ADC_INJECTED_GROUP +#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP +#define AWD_EVENT ADC_AWD_EVENT +#define AWD1_EVENT ADC_AWD1_EVENT +#define AWD2_EVENT ADC_AWD2_EVENT +#define AWD3_EVENT ADC_AWD3_EVENT +#define OVR_EVENT ADC_OVR_EVENT +#define JQOVF_EVENT ADC_JQOVF_EVENT +#define ALL_CHANNELS ADC_ALL_CHANNELS +#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS +#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS +#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR +#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT +#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 +#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 +#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 +#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 +#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 +#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO +#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 +#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO +#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 +#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO +#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 +#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 +#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE +#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING +#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING +#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING +#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 + +#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY +#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY +#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC +#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC +#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL +#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL +#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 + +#if defined(STM32H7) +#define ADC_CHANNEL_VBAT_DIV4 ADC_CHANNEL_VBAT +#endif /* STM32H7 */ + +#if defined(STM32U5) +#define ADC_SAMPLETIME_5CYCLE ADC_SAMPLETIME_5CYCLES +#define ADC_SAMPLETIME_391CYCLES_5 ADC_SAMPLETIME_391CYCLES +#define ADC4_SAMPLETIME_160CYCLES_5 ADC4_SAMPLETIME_814CYCLES_5 +#endif /* STM32U5 */ + +#if defined(STM32H5) +#define ADC_CHANNEL_VCORE ADC_CHANNEL_VDDCORE +#endif /* STM32H5 */ +/** + * @} + */ + +/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose + * @{ + */ +#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE +#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE +#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 +#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 +#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 +#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 +#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 +#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 +#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 +#if defined(STM32L0) +#define COMP_LPTIMCONNECTION_ENABLED ((uint32_t)0x00000003U) /*!< COMPX output generic naming: connected to LPTIM + input 1 for COMP1, LPTIM input 2 for COMP2 */ +#endif +#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR +#if defined(STM32F373xC) || defined(STM32F378xx) +#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 +#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR +#endif /* STM32F373xC || STM32F378xx */ + +#if defined(STM32L0) || defined(STM32L4) +#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON + +#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 +#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 +#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 +#define COMP_NONINVERTINGINPUT_IO4 COMP_INPUT_PLUS_IO4 +#define COMP_NONINVERTINGINPUT_IO5 COMP_INPUT_PLUS_IO5 +#define COMP_NONINVERTINGINPUT_IO6 COMP_INPUT_PLUS_IO6 + +#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT +#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT +#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT +#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT +#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 +#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 +#if defined(STM32L0) +/* Issue fixed on STM32L0 COMP driver: only 2 dedicated IO (IO1 and IO2), */ +/* IO2 was wrongly assigned to IO shared with DAC and IO3 was corresponding */ +/* to the second dedicated IO (only for COMP2). */ +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_DAC1_CH2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO2 +#else +#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 +#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 +#endif +#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 +#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 + +#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW +#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH + +/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ +/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ +#if defined(COMP_CSR_LOCK) +#define COMP_FLAG_LOCK COMP_CSR_LOCK +#elif defined(COMP_CSR_COMP1LOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK +#elif defined(COMP_CSR_COMPxLOCK) +#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK +#endif + +#if defined(STM32L4) +#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 +#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 +#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 +#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 +#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 +#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE +#endif + +#if defined(STM32L0) +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER +#else +#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED +#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED +#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER +#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER +#endif + +#endif + +#if defined(STM32U5) +#define __HAL_COMP_COMP1_EXTI_CLEAR_RASING_FLAG __HAL_COMP_COMP1_EXTI_CLEAR_RISING_FLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose + * @{ + */ +#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig +#if defined(STM32U5) +#define MPU_DEVICE_nGnRnE MPU_DEVICE_NGNRNE +#define MPU_DEVICE_nGnRE MPU_DEVICE_NGNRE +#define MPU_DEVICE_nGRE MPU_DEVICE_NGRE +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup CRC_Aliases CRC API aliases + * @{ + */ +#if defined(STM32H5) || defined(STM32C0) +#else +#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for + inter STM32 series compatibility */ +#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for + inter STM32 series compatibility */ +#endif +/** + * @} + */ + +/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE +#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define DAC1_CHANNEL_1 DAC_CHANNEL_1 +#define DAC1_CHANNEL_2 DAC_CHANNEL_2 +#define DAC2_CHANNEL_1 DAC_CHANNEL_1 +#define DAC_WAVE_NONE 0x00000000U +#define DAC_WAVE_NOISE DAC_CR_WAVE1_0 +#define DAC_WAVE_TRIANGLE DAC_CR_WAVE1_1 +#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE +#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE +#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE + +#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5) +#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL +#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL +#endif + +#if defined(STM32U5) +#define DAC_TRIGGER_STOP_LPTIM1_OUT DAC_TRIGGER_STOP_LPTIM1_CH1 +#define DAC_TRIGGER_STOP_LPTIM3_OUT DAC_TRIGGER_STOP_LPTIM3_CH1 +#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 +#define DAC_TRIGGER_LPTIM3_OUT DAC_TRIGGER_LPTIM3_CH1 +#endif + +#if defined(STM32H5) +#define DAC_TRIGGER_LPTIM1_OUT DAC_TRIGGER_LPTIM1_CH1 +#define DAC_TRIGGER_LPTIM2_OUT DAC_TRIGGER_LPTIM2_CH1 +#endif + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || \ + defined(STM32F4) || defined(STM32G4) +#define HAL_DAC_MSP_INIT_CB_ID HAL_DAC_MSPINIT_CB_ID +#define HAL_DAC_MSP_DEINIT_CB_ID HAL_DAC_MSPDEINIT_CB_ID +#endif + +/** + * @} + */ + +/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 +#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 +#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 +#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 +#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 +#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 +#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 +#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 +#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 +#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 +#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 +#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 +#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 +#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 + +#define IS_HAL_REMAPDMA IS_DMA_REMAP +#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE +#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE + +#if defined(STM32L4) + +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI1 HAL_DMAMUX1_REQ_GEN_EXTI1 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI2 HAL_DMAMUX1_REQ_GEN_EXTI2 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI3 HAL_DMAMUX1_REQ_GEN_EXTI3 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI4 HAL_DMAMUX1_REQ_GEN_EXTI4 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI5 HAL_DMAMUX1_REQ_GEN_EXTI5 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI6 HAL_DMAMUX1_REQ_GEN_EXTI6 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI7 HAL_DMAMUX1_REQ_GEN_EXTI7 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI8 HAL_DMAMUX1_REQ_GEN_EXTI8 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI9 HAL_DMAMUX1_REQ_GEN_EXTI9 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI10 HAL_DMAMUX1_REQ_GEN_EXTI10 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI11 HAL_DMAMUX1_REQ_GEN_EXTI11 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI12 HAL_DMAMUX1_REQ_GEN_EXTI12 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI13 HAL_DMAMUX1_REQ_GEN_EXTI13 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI14 HAL_DMAMUX1_REQ_GEN_EXTI14 +#define HAL_DMAMUX1_REQUEST_GEN_EXTI15 HAL_DMAMUX1_REQ_GEN_EXTI15 +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH3_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_DSI_TE HAL_DMAMUX1_REQ_GEN_DSI_TE +#define HAL_DMAMUX1_REQUEST_GEN_DSI_EOT HAL_DMAMUX1_REQ_GEN_DSI_EOT +#define HAL_DMAMUX1_REQUEST_GEN_DMA2D_EOT HAL_DMAMUX1_REQ_GEN_DMA2D_EOT +#define HAL_DMAMUX1_REQUEST_GEN_LTDC_IT HAL_DMAMUX1_REQ_GEN_LTDC_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#if defined(STM32L4R5xx) || defined(STM32L4R9xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || \ + defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define DMA_REQUEST_DCMI_PSSI DMA_REQUEST_DCMI +#endif + +#endif /* STM32L4 */ + +#if defined(STM32G0) +#define DMA_REQUEST_DAC1_CHANNEL1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC1_CHANNEL2 DMA_REQUEST_DAC1_CH2 +#define DMA_REQUEST_TIM16_TRIG_COM DMA_REQUEST_TIM16_COM +#define DMA_REQUEST_TIM17_TRIG_COM DMA_REQUEST_TIM17_COM + +#define LL_DMAMUX_REQ_TIM16_TRIG_COM LL_DMAMUX_REQ_TIM16_COM +#define LL_DMAMUX_REQ_TIM17_TRIG_COM LL_DMAMUX_REQ_TIM17_COM +#endif + +#if defined(STM32H7) + +#define DMA_REQUEST_DAC1 DMA_REQUEST_DAC1_CH1 +#define DMA_REQUEST_DAC2 DMA_REQUEST_DAC1_CH2 + +#define BDMA_REQUEST_LP_UART1_RX BDMA_REQUEST_LPUART1_RX +#define BDMA_REQUEST_LP_UART1_TX BDMA_REQUEST_LPUART1_TX + +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH0_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH1_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT +#define HAL_DMAMUX1_REQUEST_GEN_DMAMUX1_CH2_EVT HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM1_OUT HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX1_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX1_REQUEST_GEN_EXTI0 HAL_DMAMUX1_REQ_GEN_EXTI0 +#define HAL_DMAMUX1_REQUEST_GEN_TIM12_TRGO HAL_DMAMUX1_REQ_GEN_TIM12_TRGO + +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH0_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH1_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH2_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH3_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH4_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH5_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT +#define HAL_DMAMUX2_REQUEST_GEN_DMAMUX2_CH6_EVT HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_WKUP HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM2_OUT HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM3_OUT HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM4_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_LPTIM5_WKUP HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_WKUP HAL_DMAMUX2_REQ_GEN_I2C4_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_WKUP HAL_DMAMUX2_REQ_GEN_SPI6_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_COMP1_OUT HAL_DMAMUX2_REQ_GEN_COMP1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_COMP2_OUT HAL_DMAMUX2_REQ_GEN_COMP2_OUT +#define HAL_DMAMUX2_REQUEST_GEN_RTC_WKUP HAL_DMAMUX2_REQ_GEN_RTC_WKUP +#define HAL_DMAMUX2_REQUEST_GEN_EXTI0 HAL_DMAMUX2_REQ_GEN_EXTI0 +#define HAL_DMAMUX2_REQUEST_GEN_EXTI2 HAL_DMAMUX2_REQ_GEN_EXTI2 +#define HAL_DMAMUX2_REQUEST_GEN_I2C4_IT_EVT HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT +#define HAL_DMAMUX2_REQUEST_GEN_SPI6_IT HAL_DMAMUX2_REQ_GEN_SPI6_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_TX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT +#define HAL_DMAMUX2_REQUEST_GEN_LPUART1_RX_IT HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_IT HAL_DMAMUX2_REQ_GEN_ADC3_IT +#define HAL_DMAMUX2_REQUEST_GEN_ADC3_AWD1_OUT HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH0_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT +#define HAL_DMAMUX2_REQUEST_GEN_BDMA_CH1_IT HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT + +#define HAL_DMAMUX_REQUEST_GEN_NO_EVENT HAL_DMAMUX_REQ_GEN_NO_EVENT +#define HAL_DMAMUX_REQUEST_GEN_RISING HAL_DMAMUX_REQ_GEN_RISING +#define HAL_DMAMUX_REQUEST_GEN_FALLING HAL_DMAMUX_REQ_GEN_FALLING +#define HAL_DMAMUX_REQUEST_GEN_RISING_FALLING HAL_DMAMUX_REQ_GEN_RISING_FALLING + +#define DFSDM_FILTER_EXT_TRIG_LPTIM1 DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM2 DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT +#define DFSDM_FILTER_EXT_TRIG_LPTIM3 DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT + +#define DAC_TRIGGER_LP1_OUT DAC_TRIGGER_LPTIM1_OUT +#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT + +#endif /* STM32H7 */ + +#if defined(STM32U5) +#define GPDMA1_REQUEST_DCMI GPDMA1_REQUEST_DCMI_PSSI +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD +#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD +#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS +#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES +#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES +#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE +#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE +#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE +#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE +#define OBEX_PCROP OPTIONBYTE_PCROP +#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG +#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE +#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE +#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE +#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD +#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD +#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE +#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD +#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD +#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE +#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD +#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD +#if !defined(STM32F2) && !defined(STM32F4) && !defined(STM32F7) && !defined(STM32H7) && !defined(STM32H5) +#define PAGESIZE FLASH_PAGE_SIZE +#endif /* STM32F2 && STM32F4 && STM32F7 && STM32H7 && STM32H5 */ +#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE +#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD +#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD +#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 +#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 +#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 +#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 +#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST +#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST +#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA +#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB +#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA +#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB +#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE +#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN +#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE +#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN +#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE +#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD +#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP +#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV +#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR +#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG +#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA +#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE +#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS +#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS +#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST +#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR +#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO +#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION +#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS +#define OB_WDG_SW OB_IWDG_SW +#define OB_WDG_HW OB_IWDG_HW +#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET +#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET +#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET +#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET +#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR +#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 +#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 +#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 +#if defined(STM32G0) || defined(STM32C0) +#define OB_BOOT_LOCK_DISABLE OB_BOOT_ENTRY_FORCED_NONE +#define OB_BOOT_LOCK_ENABLE OB_BOOT_ENTRY_FORCED_FLASH +#else +#define OB_BOOT_ENTRY_FORCED_NONE OB_BOOT_LOCK_DISABLE +#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE +#endif +#if defined(STM32H7) +#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1 +#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1 +#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1 +#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2 +#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2 +#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2 +#define FLASH_FLAG_WDW FLASH_FLAG_WBNE +#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL +#endif /* STM32H7 */ +#if defined(STM32H7RS) +#define FLASH_OPTKEY1 FLASH_OPT_KEY1 +#define FLASH_OPTKEY2 FLASH_OPT_KEY2 +#endif /* STM32H7RS */ +#if defined(STM32U5) +#define OB_USER_nRST_STOP OB_USER_NRST_STOP +#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY +#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW +#define OB_USER_nSWBOOT0 OB_USER_NSWBOOT0 +#define OB_USER_nBOOT0 OB_USER_NBOOT0 +#define OB_nBOOT0_RESET OB_NBOOT0_RESET +#define OB_nBOOT0_SET OB_NBOOT0_SET +#define OB_USER_SRAM134_RST OB_USER_SRAM_RST +#define OB_SRAM134_RST_ERASE OB_SRAM_RST_ERASE +#define OB_SRAM134_RST_NOT_ERASE OB_SRAM_RST_NOT_ERASE +#endif /* STM32U5 */ +#if defined(STM32U0) +#define OB_USER_nRST_STOP OB_USER_NRST_STOP +#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY +#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW +#define OB_USER_nBOOT_SEL OB_USER_NBOOT_SEL +#define OB_USER_nBOOT0 OB_USER_NBOOT0 +#define OB_USER_nBOOT1 OB_USER_NBOOT1 +#define OB_nBOOT0_RESET OB_NBOOT0_RESET +#define OB_nBOOT0_SET OB_NBOOT0_SET +#endif /* STM32U0 */ + +/** + * @} + */ + +/** @defgroup HAL_JPEG_Aliased_Macros HAL JPEG Aliased Macros maintained for legacy purpose + * @{ + */ + +#if defined(STM32H7) +#define __HAL_RCC_JPEG_CLK_ENABLE __HAL_RCC_JPGDECEN_CLK_ENABLE +#define __HAL_RCC_JPEG_CLK_DISABLE __HAL_RCC_JPGDECEN_CLK_DISABLE +#define __HAL_RCC_JPEG_FORCE_RESET __HAL_RCC_JPGDECRST_FORCE_RESET +#define __HAL_RCC_JPEG_RELEASE_RESET __HAL_RCC_JPGDECRST_RELEASE_RESET +#define __HAL_RCC_JPEG_CLK_SLEEP_ENABLE __HAL_RCC_JPGDEC_CLK_SLEEP_ENABLE +#define __HAL_RCC_JPEG_CLK_SLEEP_DISABLE __HAL_RCC_JPGDEC_CLK_SLEEP_DISABLE +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose + * @{ + */ + +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 +#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 +#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 +#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 +#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 +#if defined(STM32G4) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOSwitchBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD +#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD +#endif /* STM32G4 */ + +#if defined(STM32U5) + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SYSCFG_EnableIOAnalogBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SYSCFG_DisableIOAnalogBooster +#define HAL_SYSCFG_EnableIOAnalogSwitchVoltageSelection HAL_SYSCFG_EnableIOAnalogVoltageSelection +#define HAL_SYSCFG_DisableIOAnalogSwitchVoltageSelection HAL_SYSCFG_DisableIOAnalogVoltageSelection + +#endif /* STM32U5 */ + +#if defined(STM32H5) +#define SYSCFG_IT_FPU_IOC SBS_IT_FPU_IOC +#define SYSCFG_IT_FPU_DZC SBS_IT_FPU_DZC +#define SYSCFG_IT_FPU_UFC SBS_IT_FPU_UFC +#define SYSCFG_IT_FPU_OFC SBS_IT_FPU_OFC +#define SYSCFG_IT_FPU_IDC SBS_IT_FPU_IDC +#define SYSCFG_IT_FPU_IXC SBS_IT_FPU_IXC + +#define SYSCFG_BREAK_FLASH_ECC SBS_BREAK_FLASH_ECC +#define SYSCFG_BREAK_PVD SBS_BREAK_PVD +#define SYSCFG_BREAK_SRAM_ECC SBS_BREAK_SRAM_ECC +#define SYSCFG_BREAK_LOCKUP SBS_BREAK_LOCKUP + +#define SYSCFG_VREFBUF_VOLTAGE_SCALE0 VREFBUF_VOLTAGE_SCALE0 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE1 VREFBUF_VOLTAGE_SCALE1 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE2 VREFBUF_VOLTAGE_SCALE2 +#define SYSCFG_VREFBUF_VOLTAGE_SCALE3 VREFBUF_VOLTAGE_SCALE3 + +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_DISABLE VREFBUF_HIGH_IMPEDANCE_DISABLE +#define SYSCFG_VREFBUF_HIGH_IMPEDANCE_ENABLE VREFBUF_HIGH_IMPEDANCE_ENABLE + +#define SYSCFG_FASTMODEPLUS_PB6 SBS_FASTMODEPLUS_PB6 +#define SYSCFG_FASTMODEPLUS_PB7 SBS_FASTMODEPLUS_PB7 +#define SYSCFG_FASTMODEPLUS_PB8 SBS_FASTMODEPLUS_PB8 +#define SYSCFG_FASTMODEPLUS_PB9 SBS_FASTMODEPLUS_PB9 + +#define SYSCFG_ETH_MII SBS_ETH_MII +#define SYSCFG_ETH_RMII SBS_ETH_RMII +#define IS_SYSCFG_ETHERNET_CONFIG IS_SBS_ETHERNET_CONFIG + +#define SYSCFG_MEMORIES_ERASE_FLAG_IPMEE SBS_MEMORIES_ERASE_FLAG_IPMEE +#define SYSCFG_MEMORIES_ERASE_FLAG_MCLR SBS_MEMORIES_ERASE_FLAG_MCLR +#define IS_SYSCFG_MEMORIES_ERASE_FLAG IS_SBS_MEMORIES_ERASE_FLAG + +#define IS_SYSCFG_CODE_CONFIG IS_SBS_CODE_CONFIG + +#define SYSCFG_MPU_NSEC SBS_MPU_NSEC +#define SYSCFG_VTOR_NSEC SBS_VTOR_NSEC +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#define SYSCFG_SAU SBS_SAU +#define SYSCFG_MPU_SEC SBS_MPU_SEC +#define SYSCFG_VTOR_AIRCR_SEC SBS_VTOR_AIRCR_SEC +#define SYSCFG_LOCK_ALL SBS_LOCK_ALL +#else +#define SYSCFG_LOCK_ALL SBS_LOCK_ALL +#endif /* __ARM_FEATURE_CMSE */ + +#define SYSCFG_CLK SBS_CLK +#define SYSCFG_CLASSB SBS_CLASSB +#define SYSCFG_FPU SBS_FPU +#define SYSCFG_ALL SBS_ALL + +#define SYSCFG_SEC SBS_SEC +#define SYSCFG_NSEC SBS_NSEC + +#define __HAL_SYSCFG_FPU_INTERRUPT_ENABLE __HAL_SBS_FPU_INTERRUPT_ENABLE +#define __HAL_SYSCFG_FPU_INTERRUPT_DISABLE __HAL_SBS_FPU_INTERRUPT_DISABLE + +#define __HAL_SYSCFG_BREAK_ECC_LOCK __HAL_SBS_BREAK_ECC_LOCK +#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK __HAL_SBS_BREAK_LOCKUP_LOCK +#define __HAL_SYSCFG_BREAK_PVD_LOCK __HAL_SBS_BREAK_PVD_LOCK +#define __HAL_SYSCFG_BREAK_SRAM_ECC_LOCK __HAL_SBS_BREAK_SRAM_ECC_LOCK + +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE __HAL_SBS_FASTMODEPLUS_ENABLE +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE __HAL_SBS_FASTMODEPLUS_DISABLE + +#define __HAL_SYSCFG_GET_MEMORIES_ERASE_STATUS __HAL_SBS_GET_MEMORIES_ERASE_STATUS +#define __HAL_SYSCFG_CLEAR_MEMORIES_ERASE_STATUS __HAL_SBS_CLEAR_MEMORIES_ERASE_STATUS + +#define IS_SYSCFG_FPU_INTERRUPT IS_SBS_FPU_INTERRUPT +#define IS_SYSCFG_BREAK_CONFIG IS_SBS_BREAK_CONFIG +#define IS_SYSCFG_VREFBUF_VOLTAGE_SCALE IS_VREFBUF_VOLTAGE_SCALE +#define IS_SYSCFG_VREFBUF_HIGH_IMPEDANCE IS_VREFBUF_HIGH_IMPEDANCE +#define IS_SYSCFG_VREFBUF_TRIMMING IS_VREFBUF_TRIMMING +#define IS_SYSCFG_FASTMODEPLUS IS_SBS_FASTMODEPLUS +#define IS_SYSCFG_ITEMS_ATTRIBUTES IS_SBS_ITEMS_ATTRIBUTES +#define IS_SYSCFG_ATTRIBUTES IS_SBS_ATTRIBUTES +#define IS_SYSCFG_LOCK_ITEMS IS_SBS_LOCK_ITEMS + +#define HAL_SYSCFG_VREFBUF_VoltageScalingConfig HAL_VREFBUF_VoltageScalingConfig +#define HAL_SYSCFG_VREFBUF_HighImpedanceConfig HAL_VREFBUF_HighImpedanceConfig +#define HAL_SYSCFG_VREFBUF_TrimmingConfig HAL_VREFBUF_TrimmingConfig +#define HAL_SYSCFG_EnableVREFBUF HAL_EnableVREFBUF +#define HAL_SYSCFG_DisableVREFBUF HAL_DisableVREFBUF + +#define HAL_SYSCFG_EnableIOAnalogSwitchBooster HAL_SBS_EnableIOAnalogSwitchBooster +#define HAL_SYSCFG_DisableIOAnalogSwitchBooster HAL_SBS_DisableIOAnalogSwitchBooster +#define HAL_SYSCFG_ETHInterfaceSelect HAL_SBS_ETHInterfaceSelect + +#define HAL_SYSCFG_Lock HAL_SBS_Lock +#define HAL_SYSCFG_GetLock HAL_SBS_GetLock + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +#define HAL_SYSCFG_ConfigAttributes HAL_SBS_ConfigAttributes +#define HAL_SYSCFG_GetConfigAttributes HAL_SBS_GetConfigAttributes +#endif /* __ARM_FEATURE_CMSE */ + +#endif /* STM32H5 */ + + +/** + * @} + */ + + +/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose + * @{ + */ +#if defined(STM32L4) || defined(STM32F7) || defined(STM32H7) || defined(STM32G4) +#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE +#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE +#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 +#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 +#elif defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) +#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE +#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE +#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 +#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 +#endif +/** + * @} + */ + +/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef +#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef +/** + * @} + */ + +/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose + * @{ + */ +#define GET_GPIO_SOURCE GPIO_GET_INDEX +#define GET_GPIO_INDEX GPIO_GET_INDEX + +#if defined(STM32F4) +#define GPIO_AF12_SDMMC GPIO_AF12_SDIO +#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO +#endif + +#if defined(STM32F7) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32L4) +#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 +#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 +#endif + +#if defined(STM32H7) +#define GPIO_AF7_SDIO1 GPIO_AF7_SDMMC1 +#define GPIO_AF8_SDIO1 GPIO_AF8_SDMMC1 +#define GPIO_AF12_SDIO1 GPIO_AF12_SDMMC1 +#define GPIO_AF9_SDIO2 GPIO_AF9_SDMMC2 +#define GPIO_AF10_SDIO2 GPIO_AF10_SDMMC2 +#define GPIO_AF11_SDIO2 GPIO_AF11_SDMMC2 + +#if defined (STM32H743xx) || defined (STM32H753xx) || defined (STM32H750xx) || defined (STM32H742xx) || \ + defined (STM32H745xx) || defined (STM32H755xx) || defined (STM32H747xx) || defined (STM32H757xx) +#define GPIO_AF10_OTG2_HS GPIO_AF10_OTG2_FS +#define GPIO_AF10_OTG1_FS GPIO_AF10_OTG1_HS +#define GPIO_AF12_OTG2_FS GPIO_AF12_OTG1_FS +#endif /*STM32H743xx || STM32H753xx || STM32H750xx || STM32H742xx || STM32H745xx || STM32H755xx || STM32H747xx || \ + STM32H757xx */ +#endif /* STM32H7 */ + +#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 +#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 +#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 + +#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || \ + defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB || STM32U5*/ + +#if defined(STM32L1) +#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH +#endif /* STM32L1 */ + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) +#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW +#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM +#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH +#endif /* STM32F0 || STM32F3 || STM32F1 */ + +#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 + +#if defined(STM32U5) || defined(STM32H5) +#define GPIO_AF0_RTC_50Hz GPIO_AF0_RTC_50HZ +#endif /* STM32U5 || STM32H5 */ +#if defined(STM32U5) +#define GPIO_AF0_S2DSTOP GPIO_AF0_SRDSTOP +#define GPIO_AF11_LPGPIO GPIO_AF11_LPGPIO1 +#endif /* STM32U5 */ + +#if defined(STM32WBA) +#define GPIO_AF11_RF_ANTSW0 GPIO_AF11_RF +#define GPIO_AF11_RF_ANTSW1 GPIO_AF11_RF +#define GPIO_AF11_RF_ANTSW2 GPIO_AF11_RF +#define GPIO_AF11_RF_IO1 GPIO_AF11_RF +#define GPIO_AF11_RF_IO2 GPIO_AF11_RF +#define GPIO_AF11_RF_IO3 GPIO_AF11_RF +#define GPIO_AF11_RF_IO4 GPIO_AF11_RF +#define GPIO_AF11_RF_IO5 GPIO_AF11_RF +#define GPIO_AF11_RF_IO6 GPIO_AF11_RF +#define GPIO_AF11_RF_IO7 GPIO_AF11_RF +#define GPIO_AF11_RF_IO8 GPIO_AF11_RF +#define GPIO_AF11_RF_IO9 GPIO_AF11_RF +#endif /* STM32WBA */ +/** + * @} + */ + +/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose + * @{ + */ +#if defined(STM32U5) +#define GTZC_PERIPH_DCMI GTZC_PERIPH_DCMI_PSSI +#define GTZC_PERIPH_LTDC GTZC_PERIPH_LTDCUSB +#endif /* STM32U5 */ +#if defined(STM32H5) +#define GTZC_PERIPH_DAC12 GTZC_PERIPH_DAC1 +#define GTZC_PERIPH_ADC12 GTZC_PERIPH_ADC +#define GTZC_PERIPH_USBFS GTZC_PERIPH_USB +#endif /* STM32H5 */ +#if defined(STM32H5) || defined(STM32U5) +#define GTZC_MCPBB_NB_VCTR_REG_MAX GTZC_MPCBB_NB_VCTR_REG_MAX +#define GTZC_MCPBB_NB_LCK_VCTR_REG_MAX GTZC_MPCBB_NB_LCK_VCTR_REG_MAX +#define GTZC_MCPBB_SUPERBLOCK_UNLOCKED GTZC_MPCBB_SUPERBLOCK_UNLOCKED +#define GTZC_MCPBB_SUPERBLOCK_LOCKED GTZC_MPCBB_SUPERBLOCK_LOCKED +#define GTZC_MCPBB_BLOCK_NSEC GTZC_MPCBB_BLOCK_NSEC +#define GTZC_MCPBB_BLOCK_SEC GTZC_MPCBB_BLOCK_SEC +#define GTZC_MCPBB_BLOCK_NPRIV GTZC_MPCBB_BLOCK_NPRIV +#define GTZC_MCPBB_BLOCK_PRIV GTZC_MPCBB_BLOCK_PRIV +#define GTZC_MCPBB_LOCK_OFF GTZC_MPCBB_LOCK_OFF +#define GTZC_MCPBB_LOCK_ON GTZC_MPCBB_LOCK_ON +#endif /* STM32H5 || STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 +#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 +#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 + +#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER +#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER +#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD +#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD +#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER +#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER +#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE +#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE + +#if defined(STM32F3) || defined(STM32G4) || defined(STM32H7) +#define HRTIMInterruptResquests HRTIMInterruptRequests +#endif /* STM32F3 || STM32G4 || STM32H7 */ + +#if defined(STM32G4) +#define HAL_HRTIM_ExternalEventCounterConfig HAL_HRTIM_ExtEventCounterConfig +#define HAL_HRTIM_ExternalEventCounterEnable HAL_HRTIM_ExtEventCounterEnable +#define HAL_HRTIM_ExternalEventCounterDisable HAL_HRTIM_ExtEventCounterDisable +#define HAL_HRTIM_ExternalEventCounterReset HAL_HRTIM_ExtEventCounterReset +#define HRTIM_TIMEEVENT_A HRTIM_EVENTCOUNTER_A +#define HRTIM_TIMEEVENT_B HRTIM_EVENTCOUNTER_B +#define HRTIM_TIMEEVENTRESETMODE_UNCONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_UNCONDITIONAL +#define HRTIM_TIMEEVENTRESETMODE_CONDITIONAL HRTIM_EVENTCOUNTER_RSTMODE_CONDITIONAL +#endif /* STM32G4 */ + +#if defined(STM32H7) +#define HRTIM_OUTPUTSET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTSET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTSET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTSET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTSET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTSET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTSET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTSET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTSET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTSET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 + +#define HRTIM_OUTPUTRESET_TIMAEV1_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMAEV2_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMAEV3_TIMCCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMAEV4_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMAEV5_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMAEV6_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMAEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMAEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMAEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMBEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMBEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMBEV3_TIMCCMP3 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMBEV4_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMBEV5_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMBEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMBEV7_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMBEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMBEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMCEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMCEV2_TIMACMP2 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMCEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMCEV4_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMCEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMCEV6_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMCEV7_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMCEV8_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMCEV9_TIMFCMP2 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMDEV1_TIMACMP1 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMDEV2_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMDEV3_TIMBCMP2 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMDEV4_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMDEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMDEV6_TIMECMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMDEV7_TIMECMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMDEV8_TIMFCMP1 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMDEV9_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMEEV1_TIMACMP4 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMEEV2_TIMBCMP3 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMEEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMEEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMEEV5_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMEEV6_TIMDCMP1 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMEEV7_TIMDCMP2 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMEEV8_TIMFCMP3 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMEEV9_TIMFCMP4 HRTIM_OUTPUTSET_TIMEV_9 +#define HRTIM_OUTPUTRESET_TIMFEV1_TIMACMP3 HRTIM_OUTPUTSET_TIMEV_1 +#define HRTIM_OUTPUTRESET_TIMFEV2_TIMBCMP1 HRTIM_OUTPUTSET_TIMEV_2 +#define HRTIM_OUTPUTRESET_TIMFEV3_TIMBCMP4 HRTIM_OUTPUTSET_TIMEV_3 +#define HRTIM_OUTPUTRESET_TIMFEV4_TIMCCMP1 HRTIM_OUTPUTSET_TIMEV_4 +#define HRTIM_OUTPUTRESET_TIMFEV5_TIMCCMP4 HRTIM_OUTPUTSET_TIMEV_5 +#define HRTIM_OUTPUTRESET_TIMFEV6_TIMDCMP3 HRTIM_OUTPUTSET_TIMEV_6 +#define HRTIM_OUTPUTRESET_TIMFEV7_TIMDCMP4 HRTIM_OUTPUTSET_TIMEV_7 +#define HRTIM_OUTPUTRESET_TIMFEV8_TIMECMP2 HRTIM_OUTPUTSET_TIMEV_8 +#define HRTIM_OUTPUTRESET_TIMFEV9_TIMECMP3 HRTIM_OUTPUTSET_TIMEV_9 +#endif /* STM32H7 */ + +#if defined(STM32F3) +/** @brief Constants defining available sources associated to external events. + */ +#define HRTIM_EVENTSRC_1 (0x00000000U) +#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) +#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) +#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) + +/** @brief Constants defining the DLL calibration periods (in micro seconds) + */ +#define HRTIM_CALIBRATIONRATE_7300 0x00000000U +#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) +#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) +#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) +#endif /* STM32F3 */ + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE +#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE +#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE +#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE +#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE +#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE +#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE +#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE +#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || \ + defined(STM32L1) || defined(STM32F7) +#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX +#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX +#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX +#endif +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE +#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE + +/** + * @} + */ + +/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define KR_KEY_RELOAD IWDG_KEY_RELOAD +#define KR_KEY_ENABLE IWDG_KEY_ENABLE +#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE +#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE +/** + * @} + */ + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ + +#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION +#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS +#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS + +#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING +#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING +#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING + +#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION +#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS + +/* The following 3 definition have also been present in a temporary version of lptim.h */ +/* They need to be renamed also to the right name, just in case */ +#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS +#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS + + +/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_LPTIM_ReadCompare HAL_LPTIM_ReadCapturedValue +/** + * @} + */ + +#if defined(STM32U5) +#define LPTIM_ISR_CC1 LPTIM_ISR_CC1IF +#define LPTIM_ISR_CC2 LPTIM_ISR_CC2IF +#define LPTIM_CHANNEL_ALL 0x00000000U +#endif /* STM32U5 */ +/** + * @} + */ + +/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b +#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b +#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b +#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b + +#define NAND_AddressTypedef NAND_AddressTypeDef + +#define __ARRAY_ADDRESS ARRAY_ADDRESS +#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE +#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE +#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE +#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE +/** + * @} + */ + +/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose + * @{ + */ +#define NOR_StatusTypedef HAL_NOR_StatusTypeDef +#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS +#define NOR_ONGOING HAL_NOR_STATUS_ONGOING +#define NOR_ERROR HAL_NOR_STATUS_ERROR +#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT + +#define __NOR_WRITE NOR_WRITE +#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT +/** + * @} + */ + +/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose + * @{ + */ + +#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 +#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 +#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 +#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 + +#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 +#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 +#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 +#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 + +#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 +#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 + +#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 +#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 + +#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO +#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 +#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 + +#if defined(STM32L1) || defined(STM32L4) || defined(STM32L5) || defined(STM32H7) || defined(STM32G4) || defined(STM32U5) +#define HAL_OPAMP_MSP_INIT_CB_ID HAL_OPAMP_MSPINIT_CB_ID +#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID +#endif + +#if defined(STM32L4) || defined(STM32L5) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER +#elif defined(STM32G4) +#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED +#endif + +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose + * @{ + */ +#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS + +#if defined(STM32H7) +#define I2S_IT_TXE I2S_IT_TXP +#define I2S_IT_RXNE I2S_IT_RXP + +#define I2S_FLAG_TXE I2S_FLAG_TXP +#define I2S_FLAG_RXNE I2S_FLAG_RXP +#endif + +#if defined(STM32F7) +#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL +#endif +/** + * @} + */ + +/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose + * @{ + */ + +/* Compact Flash-ATA registers description */ +#define CF_DATA ATA_DATA +#define CF_SECTOR_COUNT ATA_SECTOR_COUNT +#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER +#define CF_CYLINDER_LOW ATA_CYLINDER_LOW +#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH +#define CF_CARD_HEAD ATA_CARD_HEAD +#define CF_STATUS_CMD ATA_STATUS_CMD +#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE +#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA + +/* Compact Flash-ATA commands */ +#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD +#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD +#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD +#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD + +#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef +#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS +#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING +#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR +#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose + * @{ + */ + +#define FORMAT_BIN RTC_FORMAT_BIN +#define FORMAT_BCD RTC_FORMAT_BCD + +#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE +#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE +#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE + +#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE +#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE +#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE +#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT +#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT + +#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT +#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 +#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 + +#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE +#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 +#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 + +#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT +#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 +#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 + +#if defined(STM32H5) || defined(STM32H7RS) || defined(STM32N6) +#define TAMP_SECRETDEVICE_ERASE_NONE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_BKP_SRAM TAMP_DEVICESECRETS_ERASE_BKPSRAM +#endif /* STM32H5 || STM32H7RS || STM32N6 */ + +#if defined(STM32WBA) +#define TAMP_SECRETDEVICE_ERASE_NONE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_SRAM2 TAMP_DEVICESECRETS_ERASE_SRAM2 +#define TAMP_SECRETDEVICE_ERASE_RHUK TAMP_DEVICESECRETS_ERASE_RHUK +#define TAMP_SECRETDEVICE_ERASE_ICACHE TAMP_DEVICESECRETS_ERASE_ICACHE +#define TAMP_SECRETDEVICE_ERASE_SAES_AES_HASH TAMP_DEVICESECRETS_ERASE_SAES_AES_HASH +#define TAMP_SECRETDEVICE_ERASE_PKA_SRAM TAMP_DEVICESECRETS_ERASE_PKA_SRAM +#define TAMP_SECRETDEVICE_ERASE_ALL TAMP_DEVICESECRETS_ERASE_ALL +#endif /* STM32WBA */ + +#if defined(STM32H5) || defined(STM32WBA) || defined(STM32H7RS) || defined(STM32N6) +#define TAMP_SECRETDEVICE_ERASE_DISABLE TAMP_DEVICESECRETS_ERASE_NONE +#define TAMP_SECRETDEVICE_ERASE_ENABLE TAMP_SECRETDEVICE_ERASE_ALL +#endif /* STM32H5 || STM32WBA || STM32H7RS || STM32N6 */ + +#if defined(STM32F7) || defined(STM32WB) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_ENABLE_BITS_MASK +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_IT_ENABLE_BITS_MASK +#endif /* STM32F7 || STM32WB */ + +#if defined(STM32H7) +#define RTC_TAMPCR_TAMPXE RTC_TAMPER_X +#define RTC_TAMPCR_TAMPXIE RTC_TAMPER_X_INTERRUPT +#endif /* STM32H7 */ + +#if defined(STM32F7) || defined(STM32H7) || defined(STM32L0) || defined(STM32WB) +#define RTC_TAMPER1_INTERRUPT RTC_IT_TAMP1 +#define RTC_TAMPER2_INTERRUPT RTC_IT_TAMP2 +#define RTC_TAMPER3_INTERRUPT RTC_IT_TAMP3 +#define RTC_ALL_TAMPER_INTERRUPT RTC_IT_TAMP +#endif /* STM32F7 || STM32H7 || STM32L0 || STM32WB */ + +/** + * @} + */ + + +/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE +#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE + +#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE +#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE +#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE + +#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE +#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE + +#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE +#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE +/** + * @} + */ + + +/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose + * @{ + */ +#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE +#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE +#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE +#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE +#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE +#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE +#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE +#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE +#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE +#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE +#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose + * @{ + */ +#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE +#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE + +#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE +#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE + +#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE +#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE + +#if defined(STM32H7) + +#define SPI_FLAG_TXE SPI_FLAG_TXP +#define SPI_FLAG_RXNE SPI_FLAG_RXP + +#define SPI_IT_TXE SPI_IT_TXP +#define SPI_IT_RXNE SPI_IT_RXP + +#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET +#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET +#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET +#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET + +#endif /* STM32H7 */ + +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose + * @{ + */ +#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK +#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK + +#define TIM_DMABase_CR1 TIM_DMABASE_CR1 +#define TIM_DMABase_CR2 TIM_DMABASE_CR2 +#define TIM_DMABase_SMCR TIM_DMABASE_SMCR +#define TIM_DMABase_DIER TIM_DMABASE_DIER +#define TIM_DMABase_SR TIM_DMABASE_SR +#define TIM_DMABase_EGR TIM_DMABASE_EGR +#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 +#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 +#define TIM_DMABase_CCER TIM_DMABASE_CCER +#define TIM_DMABase_CNT TIM_DMABASE_CNT +#define TIM_DMABase_PSC TIM_DMABASE_PSC +#define TIM_DMABase_ARR TIM_DMABASE_ARR +#define TIM_DMABase_RCR TIM_DMABASE_RCR +#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 +#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 +#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 +#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 +#define TIM_DMABase_BDTR TIM_DMABASE_BDTR +#define TIM_DMABase_DCR TIM_DMABASE_DCR +#define TIM_DMABase_DMAR TIM_DMABASE_DMAR +#define TIM_DMABase_OR1 TIM_DMABASE_OR1 +#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 +#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 +#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 +#define TIM_DMABase_OR2 TIM_DMABASE_OR2 +#define TIM_DMABase_OR3 TIM_DMABASE_OR3 +#define TIM_DMABase_OR TIM_DMABASE_OR + +#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE +#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 +#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 +#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 +#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 +#define TIM_EventSource_COM TIM_EVENTSOURCE_COM +#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER +#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK +#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 + +#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER +#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS +#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS +#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS +#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS +#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS +#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS +#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS +#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS +#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS +#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS +#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS +#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS +#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS +#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS +#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS +#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS +#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS + +#if defined(STM32L0) +#define TIM22_TI1_GPIO1 TIM22_TI1_GPIO +#define TIM22_TI1_GPIO2 TIM22_TI1_GPIO +#endif + +#if defined(STM32F3) +#define IS_TIM_HALL_INTERFACE_INSTANCE IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE +#endif + +#if defined(STM32H7) +#define TIM_TIM1_ETR_COMP1_OUT TIM_TIM1_ETR_COMP1 +#define TIM_TIM1_ETR_COMP2_OUT TIM_TIM1_ETR_COMP2 +#define TIM_TIM8_ETR_COMP1_OUT TIM_TIM8_ETR_COMP1 +#define TIM_TIM8_ETR_COMP2_OUT TIM_TIM8_ETR_COMP2 +#define TIM_TIM2_ETR_COMP1_OUT TIM_TIM2_ETR_COMP1 +#define TIM_TIM2_ETR_COMP2_OUT TIM_TIM2_ETR_COMP2 +#define TIM_TIM3_ETR_COMP1_OUT TIM_TIM3_ETR_COMP1 +#define TIM_TIM1_TI1_COMP1_OUT TIM_TIM1_TI1_COMP1 +#define TIM_TIM8_TI1_COMP2_OUT TIM_TIM8_TI1_COMP2 +#define TIM_TIM2_TI4_COMP1_OUT TIM_TIM2_TI4_COMP1 +#define TIM_TIM2_TI4_COMP2_OUT TIM_TIM2_TI4_COMP2 +#define TIM_TIM2_TI4_COMP1COMP2_OUT TIM_TIM2_TI4_COMP1_COMP2 +#define TIM_TIM3_TI1_COMP1_OUT TIM_TIM3_TI1_COMP1 +#define TIM_TIM3_TI1_COMP2_OUT TIM_TIM3_TI1_COMP2 +#define TIM_TIM3_TI1_COMP1COMP2_OUT TIM_TIM3_TI1_COMP1_COMP2 +#endif + +#if defined(STM32U5) || defined(STM32MP2) +#define OCREF_CLEAR_SELECT_Pos OCREF_CLEAR_SELECT_POS +#define OCREF_CLEAR_SELECT_Msk OCREF_CLEAR_SELECT_MSK +#endif +/** + * @} + */ + +/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose + * @{ + */ +#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING +#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose + * @{ + */ +#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE +#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE +#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE + +#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE +#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE + +#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 +#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 +#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 +#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 + +#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 +#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 +#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 +#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 + +#define __DIV_LPUART UART_DIV_LPUART + +#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE +#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose + * @{ + */ + +#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE +#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE + +#define USARTNACK_ENABLED USART_NACK_ENABLE +#define USARTNACK_DISABLED USART_NACK_DISABLE +/** + * @} + */ + +/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose + * @{ + */ +#define CFR_BASE WWDG_CFR_BASE + +/** + * @} + */ + +/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose + * @{ + */ +#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 +#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 +#define CAN_IT_RQCP0 CAN_IT_TME +#define CAN_IT_RQCP1 CAN_IT_TME +#define CAN_IT_RQCP2 CAN_IT_TME +#define INAK_TIMEOUT CAN_TIMEOUT_VALUE +#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE +#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) +#define CAN_TXSTATUS_OK ((uint8_t)0x01U) +#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) + +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose + * @{ + */ + +#define VLAN_TAG ETH_VLAN_TAG +#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD +#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD +#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD +#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK +#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK +#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK +#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK + +#define ETH_MMCCR 0x00000100U +#define ETH_MMCRIR 0x00000104U +#define ETH_MMCTIR 0x00000108U +#define ETH_MMCRIMR 0x0000010CU +#define ETH_MMCTIMR 0x00000110U +#define ETH_MMCTGFSCCR 0x0000014CU +#define ETH_MMCTGFMSCCR 0x00000150U +#define ETH_MMCTGFCR 0x00000168U +#define ETH_MMCRFCECR 0x00000194U +#define ETH_MMCRFAECR 0x00000198U +#define ETH_MMCRGUFCR 0x000001C4U + +#define ETH_MAC_TXFIFO_FULL 0x02000000U /* Tx FIFO full */ +#define ETH_MAC_TXFIFONOT_EMPTY 0x01000000U /* Tx FIFO not empty */ +#define ETH_MAC_TXFIFO_WRITE_ACTIVE 0x00400000U /* Tx FIFO write active */ +#define ETH_MAC_TXFIFO_IDLE 0x00000000U /* Tx FIFO read status: Idle */ +#define ETH_MAC_TXFIFO_READ 0x00100000U /* Tx FIFO read status: Read (transferring data to + the MAC transmitter) */ +#define ETH_MAC_TXFIFO_WAITING 0x00200000U /* Tx FIFO read status: Waiting for TxStatus from + MAC transmitter */ +#define ETH_MAC_TXFIFO_WRITING 0x00300000U /* Tx FIFO read status: Writing the received TxStatus + or flushing the TxFIFO */ +#define ETH_MAC_TRANSMISSION_PAUSE 0x00080000U /* MAC transmitter in pause */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE 0x00000000U /* MAC transmit frame controller: Idle */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING 0x00020000U /* MAC transmit frame controller: Waiting for Status + of previous frame or IFG/backoff period to be over */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF 0x00040000U /* MAC transmit frame controller: Generating and + transmitting a Pause control frame (in full duplex mode) */ +#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING 0x00060000U /* MAC transmit frame controller: Transferring input + frame for transmission */ +#define ETH_MAC_MII_TRANSMIT_ACTIVE 0x00010000U /* MAC MII transmit engine active */ +#define ETH_MAC_RXFIFO_EMPTY 0x00000000U /* Rx FIFO fill level: empty */ +#define ETH_MAC_RXFIFO_BELOW_THRESHOLD 0x00000100U /* Rx FIFO fill level: fill-level below flow-control + de-activate threshold */ +#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD 0x00000200U /* Rx FIFO fill level: fill-level above flow-control + activate threshold */ +#define ETH_MAC_RXFIFO_FULL 0x00000300U /* Rx FIFO fill level: full */ +#if defined(STM32F1) +#else +#define ETH_MAC_READCONTROLLER_IDLE 0x00000000U /* Rx FIFO read controller IDLE state */ +#define ETH_MAC_READCONTROLLER_READING_DATA 0x00000020U /* Rx FIFO read controller Reading frame data */ +#define ETH_MAC_READCONTROLLER_READING_STATUS 0x00000040U /* Rx FIFO read controller Reading frame status + (or time-stamp) */ +#endif +#define ETH_MAC_READCONTROLLER_FLUSHING 0x00000060U /* Rx FIFO read controller Flushing the frame data and + status */ +#define ETH_MAC_RXFIFO_WRITE_ACTIVE 0x00000010U /* Rx FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_NOTACTIVE 0x00000000U /* MAC small FIFO read / write controllers not active */ +#define ETH_MAC_SMALL_FIFO_READ_ACTIVE 0x00000002U /* MAC small FIFO read controller active */ +#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE 0x00000004U /* MAC small FIFO write controller active */ +#define ETH_MAC_SMALL_FIFO_RW_ACTIVE 0x00000006U /* MAC small FIFO read / write controllers active */ +#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE 0x00000001U /* MAC MII receive protocol engine active */ + +#define ETH_TxPacketConfig ETH_TxPacketConfigTypeDef /* Transmit Packet Configuration structure definition */ + +/** + * @} + */ + +/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose + * @{ + */ +#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR +#define DCMI_IT_OVF DCMI_IT_OVR +#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI +#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI + +#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop +#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop +#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop + +/** + * @} + */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) +/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose + * @{ + */ +#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 +#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 +#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 +#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 +#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 + +#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 +#define CM_RGB888 DMA2D_INPUT_RGB888 +#define CM_RGB565 DMA2D_INPUT_RGB565 +#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 +#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 +#define CM_L8 DMA2D_INPUT_L8 +#define CM_AL44 DMA2D_INPUT_AL44 +#define CM_AL88 DMA2D_INPUT_AL88 +#define CM_L4 DMA2D_INPUT_L4 +#define CM_A8 DMA2D_INPUT_A8 +#define CM_A4 DMA2D_INPUT_A4 +/** + * @} + */ +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */ + +#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \ + || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \ + || defined(STM32H7) || defined(STM32U5) +/** @defgroup DMA2D_Aliases DMA2D API Aliases + * @{ + */ +#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort + for compatibility with legacy code */ +/** + * @} + */ + +#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 || STM32U5 */ + +/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback +/** + * @} + */ + +/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose + * @{ + */ + +#if defined(STM32U5) +#define HAL_DCACHE_CleanInvalidateByAddr HAL_DCACHE_CleanInvalidByAddr +#define HAL_DCACHE_CleanInvalidateByAddr_IT HAL_DCACHE_CleanInvalidByAddr_IT +#endif /* STM32U5 */ + +/** + * @} + */ + +#if !defined(STM32F2) +/** @defgroup HASH_alias HASH API alias + * @{ + */ +#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */ +/** + * + * @} + */ +#endif /* STM32F2 */ +/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef +#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef +#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish +#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish +#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish +#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish + +/*HASH Algorithm Selection*/ + +#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 +#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 +#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 +#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 + +#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH +#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC + +#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY +#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY + +#if defined(STM32L4) || defined(STM32L5) || defined(STM32F2) || defined(STM32F4) || defined(STM32F7) || defined(STM32H7) + +#define HAL_HASH_MD5_Accumulate HAL_HASH_MD5_Accmlt +#define HAL_HASH_MD5_Accumulate_End HAL_HASH_MD5_Accmlt_End +#define HAL_HASH_MD5_Accumulate_IT HAL_HASH_MD5_Accmlt_IT +#define HAL_HASH_MD5_Accumulate_End_IT HAL_HASH_MD5_Accmlt_End_IT + +#define HAL_HASH_SHA1_Accumulate HAL_HASH_SHA1_Accmlt +#define HAL_HASH_SHA1_Accumulate_End HAL_HASH_SHA1_Accmlt_End +#define HAL_HASH_SHA1_Accumulate_IT HAL_HASH_SHA1_Accmlt_IT +#define HAL_HASH_SHA1_Accumulate_End_IT HAL_HASH_SHA1_Accmlt_End_IT + +#define HAL_HASHEx_SHA224_Accumulate HAL_HASHEx_SHA224_Accmlt +#define HAL_HASHEx_SHA224_Accumulate_End HAL_HASHEx_SHA224_Accmlt_End +#define HAL_HASHEx_SHA224_Accumulate_IT HAL_HASHEx_SHA224_Accmlt_IT +#define HAL_HASHEx_SHA224_Accumulate_End_IT HAL_HASHEx_SHA224_Accmlt_End_IT + +#define HAL_HASHEx_SHA256_Accumulate HAL_HASHEx_SHA256_Accmlt +#define HAL_HASHEx_SHA256_Accumulate_End HAL_HASHEx_SHA256_Accmlt_End +#define HAL_HASHEx_SHA256_Accumulate_IT HAL_HASHEx_SHA256_Accmlt_IT +#define HAL_HASHEx_SHA256_Accumulate_End_IT HAL_HASHEx_SHA256_Accmlt_End_IT + +#endif /* STM32L4 || STM32L5 || STM32F2 || STM32F4 || STM32F7 || STM32H7 */ +/** + * @} + */ + +/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode +#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode +#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode +#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode +#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode +#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode +#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\ + )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : \ + HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) +#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect +#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) +#if defined(STM32L0) +#else +#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) +#endif +#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) +#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\ + )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : \ + HAL_ADCEx_DisableVREFINTTempSensor()) +#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || \ + defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ) +#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode +#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode +#define HAL_EnableSRDomainDBGStandbyMode HAL_EnableDomain3DBGStandbyMode +#define HAL_DisableSRDomainDBGStandbyMode HAL_DisableDomain3DBGStandbyMode +#endif /* STM32H7A3xx || STM32H7B3xx || STM32H7B0xx || STM32H7A3xxQ || STM32H7B3xxQ || STM32H7B0xxQ */ + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose + * @{ + */ +#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram +#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown +#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown +#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock +#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock +#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase +#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter +#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter +#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter +#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter + +#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd) == ENABLE)? \ + HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): \ + HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) + +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || \ + defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || \ + defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT +#define HAL_I2C_Master_Sequential_Receive_IT HAL_I2C_Master_Seq_Receive_IT +#define HAL_I2C_Slave_Sequential_Transmit_IT HAL_I2C_Slave_Seq_Transmit_IT +#define HAL_I2C_Slave_Sequential_Receive_IT HAL_I2C_Slave_Seq_Receive_IT +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 || + STM32L4 || STM32L5 || STM32G4 || STM32L1 */ +#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F4) || defined(STM32F7) || \ + defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4)|| defined(STM32L1) +#define HAL_I2C_Master_Sequential_Transmit_DMA HAL_I2C_Master_Seq_Transmit_DMA +#define HAL_I2C_Master_Sequential_Receive_DMA HAL_I2C_Master_Seq_Receive_DMA +#define HAL_I2C_Slave_Sequential_Transmit_DMA HAL_I2C_Slave_Seq_Transmit_DMA +#define HAL_I2C_Slave_Sequential_Receive_DMA HAL_I2C_Slave_Seq_Receive_DMA +#endif /* STM32H7 || STM32WB || STM32G0 || STM32F4 || STM32F7 || STM32L0 || STM32L4 || STM32L5 || STM32G4 || STM32L1 */ + +#if defined(STM32F4) +#define HAL_FMPI2C_Master_Sequential_Transmit_IT HAL_FMPI2C_Master_Seq_Transmit_IT +#define HAL_FMPI2C_Master_Sequential_Receive_IT HAL_FMPI2C_Master_Seq_Receive_IT +#define HAL_FMPI2C_Slave_Sequential_Transmit_IT HAL_FMPI2C_Slave_Seq_Transmit_IT +#define HAL_FMPI2C_Slave_Sequential_Receive_IT HAL_FMPI2C_Slave_Seq_Receive_IT +#define HAL_FMPI2C_Master_Sequential_Transmit_DMA HAL_FMPI2C_Master_Seq_Transmit_DMA +#define HAL_FMPI2C_Master_Sequential_Receive_DMA HAL_FMPI2C_Master_Seq_Receive_DMA +#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA +#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA +#endif /* STM32F4 */ +/** + * @} + */ + +/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose + * @{ + */ + +#if defined(STM32G0) +#define HAL_PWR_ConfigPVD HAL_PWREx_ConfigPVD +#define HAL_PWR_EnablePVD HAL_PWREx_EnablePVD +#define HAL_PWR_DisablePVD HAL_PWREx_DisablePVD +#define HAL_PWR_PVD_IRQHandler HAL_PWREx_PVD_IRQHandler +#endif +#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD +#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg +#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown +#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor +#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg +#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown +#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor +#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler +#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD +#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler +#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback +#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive +#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive +#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC +#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC +#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM + +#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL +#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING +#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING +#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING +#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING +#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING +#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING + +#define CR_OFFSET_BB PWR_CR_OFFSET_BB +#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB +#define PMODE_BIT_NUMBER VOS_BIT_NUMBER +#define CR_PMODE_BB CR_VOS_BB + +#define DBP_BitNumber DBP_BIT_NUMBER +#define PVDE_BitNumber PVDE_BIT_NUMBER +#define PMODE_BitNumber PMODE_BIT_NUMBER +#define EWUP_BitNumber EWUP_BIT_NUMBER +#define FPDS_BitNumber FPDS_BIT_NUMBER +#define ODEN_BitNumber ODEN_BIT_NUMBER +#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER +#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER +#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER +#define BRE_BitNumber BRE_BIT_NUMBER + +#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL + +#if defined (STM32U5) +#define PWR_SRAM1_PAGE1_STOP_RETENTION PWR_SRAM1_PAGE1_STOP +#define PWR_SRAM1_PAGE2_STOP_RETENTION PWR_SRAM1_PAGE2_STOP +#define PWR_SRAM1_PAGE3_STOP_RETENTION PWR_SRAM1_PAGE3_STOP +#define PWR_SRAM1_PAGE4_STOP_RETENTION PWR_SRAM1_PAGE4_STOP +#define PWR_SRAM1_PAGE5_STOP_RETENTION PWR_SRAM1_PAGE5_STOP +#define PWR_SRAM1_PAGE6_STOP_RETENTION PWR_SRAM1_PAGE6_STOP +#define PWR_SRAM1_PAGE7_STOP_RETENTION PWR_SRAM1_PAGE7_STOP +#define PWR_SRAM1_PAGE8_STOP_RETENTION PWR_SRAM1_PAGE8_STOP +#define PWR_SRAM1_PAGE9_STOP_RETENTION PWR_SRAM1_PAGE9_STOP +#define PWR_SRAM1_PAGE10_STOP_RETENTION PWR_SRAM1_PAGE10_STOP +#define PWR_SRAM1_PAGE11_STOP_RETENTION PWR_SRAM1_PAGE11_STOP +#define PWR_SRAM1_PAGE12_STOP_RETENTION PWR_SRAM1_PAGE12_STOP +#define PWR_SRAM1_FULL_STOP_RETENTION PWR_SRAM1_FULL_STOP + +#define PWR_SRAM2_PAGE1_STOP_RETENTION PWR_SRAM2_PAGE1_STOP +#define PWR_SRAM2_PAGE2_STOP_RETENTION PWR_SRAM2_PAGE2_STOP +#define PWR_SRAM2_FULL_STOP_RETENTION PWR_SRAM2_FULL_STOP + +#define PWR_SRAM3_PAGE1_STOP_RETENTION PWR_SRAM3_PAGE1_STOP +#define PWR_SRAM3_PAGE2_STOP_RETENTION PWR_SRAM3_PAGE2_STOP +#define PWR_SRAM3_PAGE3_STOP_RETENTION PWR_SRAM3_PAGE3_STOP +#define PWR_SRAM3_PAGE4_STOP_RETENTION PWR_SRAM3_PAGE4_STOP +#define PWR_SRAM3_PAGE5_STOP_RETENTION PWR_SRAM3_PAGE5_STOP +#define PWR_SRAM3_PAGE6_STOP_RETENTION PWR_SRAM3_PAGE6_STOP +#define PWR_SRAM3_PAGE7_STOP_RETENTION PWR_SRAM3_PAGE7_STOP +#define PWR_SRAM3_PAGE8_STOP_RETENTION PWR_SRAM3_PAGE8_STOP +#define PWR_SRAM3_PAGE9_STOP_RETENTION PWR_SRAM3_PAGE9_STOP +#define PWR_SRAM3_PAGE10_STOP_RETENTION PWR_SRAM3_PAGE10_STOP +#define PWR_SRAM3_PAGE11_STOP_RETENTION PWR_SRAM3_PAGE11_STOP +#define PWR_SRAM3_PAGE12_STOP_RETENTION PWR_SRAM3_PAGE12_STOP +#define PWR_SRAM3_PAGE13_STOP_RETENTION PWR_SRAM3_PAGE13_STOP +#define PWR_SRAM3_FULL_STOP_RETENTION PWR_SRAM3_FULL_STOP + +#define PWR_SRAM4_FULL_STOP_RETENTION PWR_SRAM4_FULL_STOP + +#define PWR_SRAM5_PAGE1_STOP_RETENTION PWR_SRAM5_PAGE1_STOP +#define PWR_SRAM5_PAGE2_STOP_RETENTION PWR_SRAM5_PAGE2_STOP +#define PWR_SRAM5_PAGE3_STOP_RETENTION PWR_SRAM5_PAGE3_STOP +#define PWR_SRAM5_PAGE4_STOP_RETENTION PWR_SRAM5_PAGE4_STOP +#define PWR_SRAM5_PAGE5_STOP_RETENTION PWR_SRAM5_PAGE5_STOP +#define PWR_SRAM5_PAGE6_STOP_RETENTION PWR_SRAM5_PAGE6_STOP +#define PWR_SRAM5_PAGE7_STOP_RETENTION PWR_SRAM5_PAGE7_STOP +#define PWR_SRAM5_PAGE8_STOP_RETENTION PWR_SRAM5_PAGE8_STOP +#define PWR_SRAM5_PAGE9_STOP_RETENTION PWR_SRAM5_PAGE9_STOP +#define PWR_SRAM5_PAGE10_STOP_RETENTION PWR_SRAM5_PAGE10_STOP +#define PWR_SRAM5_PAGE11_STOP_RETENTION PWR_SRAM5_PAGE11_STOP +#define PWR_SRAM5_PAGE12_STOP_RETENTION PWR_SRAM5_PAGE12_STOP +#define PWR_SRAM5_PAGE13_STOP_RETENTION PWR_SRAM5_PAGE13_STOP +#define PWR_SRAM5_FULL_STOP_RETENTION PWR_SRAM5_FULL_STOP + +#define PWR_SRAM6_PAGE1_STOP_RETENTION PWR_SRAM6_PAGE1_STOP +#define PWR_SRAM6_PAGE2_STOP_RETENTION PWR_SRAM6_PAGE2_STOP +#define PWR_SRAM6_PAGE3_STOP_RETENTION PWR_SRAM6_PAGE3_STOP +#define PWR_SRAM6_PAGE4_STOP_RETENTION PWR_SRAM6_PAGE4_STOP +#define PWR_SRAM6_PAGE5_STOP_RETENTION PWR_SRAM6_PAGE5_STOP +#define PWR_SRAM6_PAGE6_STOP_RETENTION PWR_SRAM6_PAGE6_STOP +#define PWR_SRAM6_PAGE7_STOP_RETENTION PWR_SRAM6_PAGE7_STOP +#define PWR_SRAM6_PAGE8_STOP_RETENTION PWR_SRAM6_PAGE8_STOP +#define PWR_SRAM6_FULL_STOP_RETENTION PWR_SRAM6_FULL_STOP + + +#define PWR_ICACHE_FULL_STOP_RETENTION PWR_ICACHE_FULL_STOP +#define PWR_DCACHE1_FULL_STOP_RETENTION PWR_DCACHE1_FULL_STOP +#define PWR_DCACHE2_FULL_STOP_RETENTION PWR_DCACHE2_FULL_STOP +#define PWR_DMA2DRAM_FULL_STOP_RETENTION PWR_DMA2DRAM_FULL_STOP +#define PWR_PERIPHRAM_FULL_STOP_RETENTION PWR_PERIPHRAM_FULL_STOP +#define PWR_PKA32RAM_FULL_STOP_RETENTION PWR_PKA32RAM_FULL_STOP +#define PWR_GRAPHICPRAM_FULL_STOP_RETENTION PWR_GRAPHICPRAM_FULL_STOP +#define PWR_DSIRAM_FULL_STOP_RETENTION PWR_DSIRAM_FULL_STOP +#define PWR_JPEGRAM_FULL_STOP_RETENTION PWR_JPEGRAM_FULL_STOP + + +#define PWR_SRAM2_PAGE1_STANDBY_RETENTION PWR_SRAM2_PAGE1_STANDBY +#define PWR_SRAM2_PAGE2_STANDBY_RETENTION PWR_SRAM2_PAGE2_STANDBY +#define PWR_SRAM2_FULL_STANDBY_RETENTION PWR_SRAM2_FULL_STANDBY + +#define PWR_SRAM1_FULL_RUN_RETENTION PWR_SRAM1_FULL_RUN +#define PWR_SRAM2_FULL_RUN_RETENTION PWR_SRAM2_FULL_RUN +#define PWR_SRAM3_FULL_RUN_RETENTION PWR_SRAM3_FULL_RUN +#define PWR_SRAM4_FULL_RUN_RETENTION PWR_SRAM4_FULL_RUN +#define PWR_SRAM5_FULL_RUN_RETENTION PWR_SRAM5_FULL_RUN +#define PWR_SRAM6_FULL_RUN_RETENTION PWR_SRAM6_FULL_RUN + +#define PWR_ALL_RAM_RUN_RETENTION_MASK PWR_ALL_RAM_RUN_MASK +#endif + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Functions HAL RTC Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined(STM32H5) || defined(STM32WBA) || defined(STM32H7RS) || defined(STM32N6) +#define HAL_RTCEx_SetBoothardwareKey HAL_RTCEx_LockBootHardwareKey +#define HAL_RTCEx_BKUPBlock_Enable HAL_RTCEx_BKUPBlock +#define HAL_RTCEx_BKUPBlock_Disable HAL_RTCEx_BKUPUnblock +#define HAL_RTCEx_Erase_SecretDev_Conf HAL_RTCEx_ConfigEraseDeviceSecrets +#endif /* STM32H5 || STM32WBA || STM32H7RS || STM32N6 */ + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT +#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback +#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt +#define HAL_TIM_DMAError TIM_DMAError +#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt +#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt +#if defined(STM32H7) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || \ + defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) +#define HAL_TIM_SlaveConfigSynchronization HAL_TIM_SlaveConfigSynchro +#define HAL_TIM_SlaveConfigSynchronization_IT HAL_TIM_SlaveConfigSynchro_IT +#define HAL_TIMEx_CommutationCallback HAL_TIMEx_CommutCallback +#define HAL_TIMEx_ConfigCommutationEvent HAL_TIMEx_ConfigCommutEvent +#define HAL_TIMEx_ConfigCommutationEvent_IT HAL_TIMEx_ConfigCommutEvent_IT +#define HAL_TIMEx_ConfigCommutationEvent_DMA HAL_TIMEx_ConfigCommutEvent_DMA +#endif /* STM32H7 || STM32G0 || STM32F0 || STM32F1 || STM32F2 || STM32F3 || STM32F4 || STM32F7 || STM32L0 */ +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback +#define HAL_LTDC_Relaod HAL_LTDC_Reload +#define HAL_LTDC_StructInitFromVideoConfig HAL_LTDCEx_StructInitFromVideoConfig +#define HAL_LTDC_StructInitFromAdaptedCommandConfig HAL_LTDCEx_StructInitFromAdaptedCommandConfig +/** + * @} + */ + + +/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ + +/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose + * @{ + */ +#define AES_IT_CC CRYP_IT_CC +#define AES_IT_ERR CRYP_IT_ERR +#define AES_FLAG_CCF CRYP_FLAG_CCF +/** + * @} + */ + +/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE +#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH +#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH +#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM +#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC +#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM +#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC +#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI +#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK +#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG +#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG +#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE +#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE +#define __HAL_SYSCFG_SRAM2_WRP_ENABLE __HAL_SYSCFG_SRAM2_WRP_0_31_ENABLE + +#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY +#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 +#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS +#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER +#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER + +/** + * @} + */ + + +/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __ADC_ENABLE __HAL_ADC_ENABLE +#define __ADC_DISABLE __HAL_ADC_DISABLE +#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS +#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS +#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE +#define __ADC_IS_ENABLED ADC_IS_ENABLE +#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR +#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR +#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED +#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING +#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE + +#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION +#define __HAL_ADC_JSQR_RK ADC_JSQR_RK +#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT +#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR +#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION +#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE +#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS +#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM +#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT +#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS +#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN +#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ +#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET +#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET +#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL +#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL +#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET +#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET +#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD + +#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION +#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION +#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER +#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI +#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE +#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER +#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER +#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE + +#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT +#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT +#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL +#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM +#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET +#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE +#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE +#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER + +#define __HAL_ADC_SQR1 ADC_SQR1 +#define __HAL_ADC_SMPR1 ADC_SMPR1 +#define __HAL_ADC_SMPR2 ADC_SMPR2 +#define __HAL_ADC_SQR3_RK ADC_SQR3_RK +#define __HAL_ADC_SQR2_RK ADC_SQR2_RK +#define __HAL_ADC_SQR1_RK ADC_SQR1_RK +#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS +#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS +#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV +#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection +#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq +#define __HAL_ADC_JSQR ADC_JSQR + +#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL +#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS +#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF +#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT +#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS +#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN +#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR +#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ + +/** + * @} + */ + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT +#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT +#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT +#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE + +/** + * @} + */ + +/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 +#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 +#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 +#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 +#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 +#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 +#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 +#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 +#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 +#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 +#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 +#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 +#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 +#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 +#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 +#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 + +#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 +#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 +#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 +#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 +#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 +#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 +#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 +#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 +#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 +#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 +#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 +#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 +#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 +#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 + + +#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 +#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 +#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 +#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 +#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 +#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 +#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC +#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC +#if defined(STM32H7) +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1 +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1 +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1 +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1 +#else +#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG +#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG +#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG +#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG +#endif /* STM32H7 */ +#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT +#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT +#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT +#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT +#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT +#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT +#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 +#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 +#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 +#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 +#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 +#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 + +/** + * @} + */ + +/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32F3) +#define COMP_START __HAL_COMP_ENABLE +#define COMP_STOP __HAL_COMP_DISABLE +#define COMP_LOCK __HAL_COMP_LOCK + +#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || \ + defined(STM32F334x8) || defined(STM32F328xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +#endif +#if defined(STM32F302xE) || defined(STM32F302xC) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP6_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP6_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) +#endif +#if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ + ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP7_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP7_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ + ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) +#endif +#if defined(STM32F373xC) ||defined(STM32F378xx) +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif +#else +#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) +#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_ENABLE_IT()) +#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ + __HAL_COMP_COMP2_EXTI_DISABLE_IT()) +#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ + __HAL_COMP_COMP2_EXTI_GET_FLAG()) +#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ + __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) +#endif + +#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE + +#if defined(STM32L0) || defined(STM32L4) +/* Note: On these STM32 families, the only argument of this macro */ +/* is COMP_FLAG_LOCK. */ +/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ +/* argument. */ +#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) +#endif +/** + * @} + */ + +#if defined(STM32L0) || defined(STM32L4) +/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose + * @{ + */ +#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is + done into HAL_COMP_Init() */ +#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is + done into HAL_COMP_Init() */ +/** + * @} + */ +#endif + +/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ + ((WAVE) == DAC_WAVE_NOISE)|| \ + ((WAVE) == DAC_WAVE_TRIANGLE)) + +/** + * @} + */ + +/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_WRPAREA IS_OB_WRPAREA +#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM +#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM +#define IS_TYPEERASE IS_FLASH_TYPEERASE +#define IS_NBSECTORS IS_FLASH_NBSECTORS +#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE + +/** + * @} + */ + +/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 +#define __HAL_I2C_GENERATE_START I2C_GENERATE_START +#if defined(STM32F1) +#define __HAL_I2C_FREQ_RANGE I2C_FREQRANGE +#else +#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE +#endif /* STM32F1 */ +#define __HAL_I2C_RISE_TIME I2C_RISE_TIME +#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD +#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST +#define __HAL_I2C_SPEED I2C_SPEED +#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE +#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ +#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS +#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE +#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ +#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB +#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB +#define __HAL_I2C_FREQRANGE I2C_FREQRANGE +/** + * @} + */ + +/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose + * @{ + */ + +#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE +#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT + +#if defined(STM32H7) +#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG +#endif + +/** + * @} + */ + +/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __IRDA_DISABLE __HAL_IRDA_DISABLE +#define __IRDA_ENABLE __HAL_IRDA_ENABLE + +#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION +#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE +#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION + +#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE + + +/** + * @} + */ + + +/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS +#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS +/** + * @} + */ + + +/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT +#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT +#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE + +/** + * @} + */ + + +/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose + * @{ + */ +#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD +#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX +#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX +#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX +#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX +#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L +#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H +#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM +#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES +#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX +#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT +#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION +#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET + +/** + * @} + */ + + +/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE +#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE +#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE +#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine +#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig +#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig +#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \ + __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \ + } while(0) +#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT +#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE +#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2(); \ + HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); \ + } while(0) +#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2(); \ + HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); \ + } while(0) +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention +#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention +#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 +#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 +#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE +#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE +#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB +#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB + +#if defined (STM32F4) +#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() +#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() +#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() +#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() +#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() +#else +#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG +#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT +#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT +#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT +#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG +#endif /* STM32F4 */ +/** + * @} + */ + + +/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose + * @{ + */ + +#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI +#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI + +#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback +#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? \ + HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) + +#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE +#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE +#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE +#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE +#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET +#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET +#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE +#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE +#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET +#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET +#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE +#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE +#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE +#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE +#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET +#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET +#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE +#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE +#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET +#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET +#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE +#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE +#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE +#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE +#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET +#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET +#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE +#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE +#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET +#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET +#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET +#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET +#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET +#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET +#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET +#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET +#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET +#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET +#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET +#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET +#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET +#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET +#if defined(STM32C0) +#define __HAL_RCC_APB1_FORCE_RESET __HAL_RCC_APB1_GRP1_FORCE_RESET +#define __HAL_RCC_APB1_RELEASE_RESET __HAL_RCC_APB1_GRP1_RELEASE_RESET +#define __HAL_RCC_APB2_FORCE_RESET __HAL_RCC_APB1_GRP2_FORCE_RESET +#define __HAL_RCC_APB2_RELEASE_RESET __HAL_RCC_APB1_GRP2_RELEASE_RESET +#endif /* STM32C0 */ +#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE +#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE +#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET +#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET +#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE +#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE +#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE +#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE +#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET +#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET +#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE +#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE +#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET +#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET +#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE +#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE +#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE +#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE +#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET +#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET +#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE +#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE +#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET +#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET +#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE +#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE +#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE +#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE +#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET +#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET +#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE +#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE +#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET +#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET +#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE +#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE +#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE +#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE +#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET +#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET +#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE +#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE +#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET +#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET +#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE +#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE +#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE +#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE +#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET +#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET +#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE +#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE +#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE +#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE +#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET +#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET +#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE +#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE +#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE +#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE +#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET +#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET +#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE +#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE +#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET +#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET +#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE +#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE +#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE +#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE +#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE +#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE +#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE +#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE +#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE +#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE +#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET +#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET +#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE +#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE +#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET +#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET +#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE +#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE +#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE +#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE +#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE +#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE +#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET +#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET +#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE +#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE +#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE +#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE +#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE +#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE +#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET +#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET +#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE +#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE +#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE +#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE +#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET +#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET +#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE +#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE +#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE +#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE +#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET +#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET +#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE +#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE +#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE +#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE +#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET +#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET +#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE +#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE +#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE +#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE +#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET +#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET +#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE +#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE +#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE +#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE +#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET +#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET +#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE +#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE +#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE +#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE +#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET +#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET +#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE +#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE +#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE +#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE +#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET +#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET +#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE +#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE +#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE +#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE +#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET +#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET +#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE +#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE +#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE +#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE +#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET +#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET +#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE +#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE +#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE +#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE +#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET +#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET +#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE +#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE +#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE +#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE +#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET +#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET +#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE +#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE +#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE +#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE +#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET +#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET +#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE +#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE +#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE +#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE +#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET +#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET +#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE +#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE +#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE +#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE +#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET +#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET +#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE +#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE +#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE +#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE +#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET +#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET +#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE +#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE +#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE +#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE +#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET +#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET +#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE +#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE +#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE +#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE +#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET +#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET +#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE +#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE +#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE +#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE +#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET +#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET + +#if defined(STM32WB) +#define __HAL_RCC_QSPI_CLK_DISABLE __HAL_RCC_QUADSPI_CLK_DISABLE +#define __HAL_RCC_QSPI_CLK_ENABLE __HAL_RCC_QUADSPI_CLK_ENABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QUADSPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QUADSPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_QSPI_FORCE_RESET __HAL_RCC_QUADSPI_FORCE_RESET +#define __HAL_RCC_QSPI_RELEASE_RESET __HAL_RCC_QUADSPI_RELEASE_RESET +#define __HAL_RCC_QSPI_IS_CLK_ENABLED __HAL_RCC_QUADSPI_IS_CLK_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_DISABLED __HAL_RCC_QUADSPI_IS_CLK_DISABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_QUADSPI_IS_CLK_SLEEP_DISABLED +#define QSPI_IRQHandler QUADSPI_IRQHandler +#endif /* __HAL_RCC_QUADSPI_CLK_ENABLE */ + +#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE +#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE +#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE +#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE +#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET +#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET +#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE +#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE +#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE +#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE +#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET +#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET +#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE +#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE +#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE +#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE +#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET +#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET +#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE +#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE +#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE +#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE +#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET +#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET +#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE +#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE +#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE +#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE +#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET +#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET +#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE +#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE +#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE +#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE +#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET +#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET +#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE +#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE +#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE +#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE +#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET +#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET +#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE +#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE +#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE +#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE +#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE +#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE +#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE +#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE +#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE +#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE +#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET +#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET +#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE +#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE +#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE +#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE +#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET +#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET +#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE +#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE +#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE +#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE +#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET +#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET +#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE +#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE +#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET +#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET +#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE +#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE +#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET +#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET +#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE +#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE +#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET +#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET +#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE +#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE +#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET +#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET +#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE +#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE +#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET +#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET +#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE +#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE +#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE +#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE +#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET +#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET +#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE +#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE +#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE +#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE +#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET +#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET +#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE +#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE +#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE +#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE +#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET +#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET +#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE +#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE +#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE +#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE +#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET +#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET +#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE +#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE +#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE +#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE +#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET +#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET +#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE +#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE +#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE +#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE +#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET +#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET +#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE +#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE +#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE +#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE +#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET +#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET +#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE +#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE +#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE +#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE +#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET +#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET +#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE +#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE +#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE +#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE +#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET +#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET +#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE +#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE +#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE +#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE +#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET +#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET +#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE +#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE +#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET +#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET +#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE +#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE +#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE +#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE +#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET +#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET +#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE +#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE +#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE +#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE +#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET +#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET +#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE +#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE +#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE +#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE +#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET +#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET +#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE +#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE +#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE +#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE +#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET +#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET +#define __USART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE +#define __USART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE +#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE +#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE +#define __USART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET +#define __USART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET +#define __USART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE +#define __USART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE +#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE +#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE +#define __USART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET +#define __USART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET +#define __USART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __USART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __USART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __USART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __USART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __USART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __USART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __USART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE +#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE +#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET +#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE +#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE +#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE +#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE +#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET + +#if defined(STM32H7) +#define __HAL_RCC_WWDG_CLK_DISABLE __HAL_RCC_WWDG1_CLK_DISABLE +#define __HAL_RCC_WWDG_CLK_ENABLE __HAL_RCC_WWDG1_CLK_ENABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG1_CLK_SLEEP_DISABLE +#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG1_CLK_SLEEP_ENABLE + +#define __HAL_RCC_WWDG_FORCE_RESET ((void)0U) /* Not available on the STM32H7*/ +#define __HAL_RCC_WWDG_RELEASE_RESET ((void)0U) /* Not available on the STM32H7*/ + + +#define __HAL_RCC_WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG1_IS_CLK_ENABLED +#define __HAL_RCC_WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG1_IS_CLK_DISABLED +#define RCC_SPI4CLKSOURCE_D2PCLK1 RCC_SPI4CLKSOURCE_D2PCLK2 +#define RCC_SPI5CLKSOURCE_D2PCLK1 RCC_SPI5CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_D2PCLK1 RCC_SPI45CLKSOURCE_D2PCLK2 +#define RCC_SPI45CLKSOURCE_CDPCLK1 RCC_SPI45CLKSOURCE_CDPCLK2 +#define RCC_SPI45CLKSOURCE_PCLK1 RCC_SPI45CLKSOURCE_PCLK2 +#endif + +#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE +#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE +#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE +#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE +#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET +#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET + +#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE +#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE +#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET +#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET +#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE +#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE +#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE +#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE +#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET +#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET +#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE +#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE +#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE +#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE +#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE +#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE +#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET +#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET +#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE +#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE + +#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET +#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE +#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE +#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE +#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE +#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE +#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE +#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE +#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE +#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE +#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE +#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE +#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE +#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE +#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE +#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE +#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET +#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET +#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE +#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE +#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE +#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE +#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE +#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET +#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET +#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE +#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE +#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE +#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE +#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET +#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET +#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE +#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE +#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE +#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE +#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET +#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET +#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE +#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE +#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE +#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE +#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE +#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE +#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE +#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE +#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE +#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE +#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE +#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE +#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE +#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE +#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE +#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE +#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE +#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE +#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE +#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE +#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET +#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET +#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE +#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE +#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE +#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE +#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET +#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET +#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE +#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE +#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE +#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE +#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET +#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET +#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE +#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE +#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE +#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE +#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET +#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET +#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE +#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE +#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE +#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE +#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET +#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE +#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE +#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE +#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE +#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE +#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE +#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET +#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET +#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE +#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE +#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE +#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE +#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET +#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET +#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE +#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE +#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE +#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE +#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET +#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET +#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE +#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE +#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED +#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET +#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE +#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED +#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE +#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE +#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE +#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE +#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE +#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE +#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE +#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE +#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET +#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET +#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE +#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE +#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE +#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE +#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET +#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET +#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE +#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE + +/* alias define maintained for legacy */ +#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET +#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET + +#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE +#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE +#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE +#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE +#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE +#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE +#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE +#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE +#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE +#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE +#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE +#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE +#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE +#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE +#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE +#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE +#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE +#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE + +#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET +#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET +#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET +#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET +#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET +#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET +#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET +#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET +#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET +#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET +#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET +#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET +#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET +#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET +#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET +#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET +#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET +#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET + +#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED +#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED +#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED +#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED +#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED +#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED +#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED +#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED +#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED +#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED +#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED +#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED +#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED +#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED +#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED +#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED +#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED +#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED +#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED +#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED +#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED +#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED +#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED +#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED +#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED +#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED +#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED +#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED +#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED +#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED +#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED +#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED +#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED +#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED +#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED +#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED +#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED +#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED +#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED +#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED +#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED +#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED +#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED +#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED +#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED +#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED +#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED +#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED +#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED +#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED +#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED +#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED +#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED +#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED +#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED +#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED +#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED +#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED +#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED +#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED +#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED +#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED +#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED +#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED +#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED +#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED +#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED +#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED +#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED +#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED +#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED +#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED +#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED +#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED +#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED +#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED +#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED +#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED +#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED +#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED +#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED +#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED +#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED +#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED +#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED +#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED +#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED +#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED +#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED +#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED +#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED +#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED +#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED +#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED +#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED +#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED +#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED +#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED +#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED +#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED +#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED +#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED +#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED +#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED +#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED +#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED +#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED +#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED +#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED +#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED +#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED +#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED +#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED +#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED + +#if defined(STM32L1) +#define __HAL_RCC_CRYP_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE +#define __HAL_RCC_CRYP_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE +#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE +#define __HAL_RCC_CRYP_FORCE_RESET __HAL_RCC_AES_FORCE_RESET +#define __HAL_RCC_CRYP_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET +#endif /* STM32L1 */ + +#if defined(STM32F4) +#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET +#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET +#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE +#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE +#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED +#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED +#define Sdmmc1ClockSelection SdioClockSelection +#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO +#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 +#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK +#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG +#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET +#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET +#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE +#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE +#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE +#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE +#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED +#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED +#define SdioClockSelection Sdmmc1ClockSelection +#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 +#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG +#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE +#endif + +#if defined(STM32F7) +#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 +#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK +#endif + +#if defined(STM32H7) +#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() __HAL_RCC_USB1_OTG_HS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() __HAL_RCC_USB1_OTG_HS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB1_OTG_HS_ULPI_CLK_SLEEP_DISABLE() + +#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_DISABLE() +#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() __HAL_RCC_USB2_OTG_FS_FORCE_RESET() +#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() __HAL_RCC_USB2_OTG_FS_RELEASE_RESET() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_ENABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_ENABLE() +#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_CLK_SLEEP_DISABLE() +#define __HAL_RCC_USB_OTG_FS_ULPI_CLK_SLEEP_DISABLE() __HAL_RCC_USB2_OTG_FS_ULPI_CLK_SLEEP_DISABLE() +#endif + +#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG +#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG + +#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE + +#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE +#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE +#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK +#define IS_RCC_HCLK_DIV IS_RCC_PCLK +#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK + +#define RCC_IT_HSI14 RCC_IT_HSI14RDY + +#define RCC_IT_CSSLSE RCC_IT_LSECSS +#define RCC_IT_CSSHSE RCC_IT_CSS + +#define RCC_PLLMUL_3 RCC_PLL_MUL3 +#define RCC_PLLMUL_4 RCC_PLL_MUL4 +#define RCC_PLLMUL_6 RCC_PLL_MUL6 +#define RCC_PLLMUL_8 RCC_PLL_MUL8 +#define RCC_PLLMUL_12 RCC_PLL_MUL12 +#define RCC_PLLMUL_16 RCC_PLL_MUL16 +#define RCC_PLLMUL_24 RCC_PLL_MUL24 +#define RCC_PLLMUL_32 RCC_PLL_MUL32 +#define RCC_PLLMUL_48 RCC_PLL_MUL48 + +#define RCC_PLLDIV_2 RCC_PLL_DIV2 +#define RCC_PLLDIV_3 RCC_PLL_DIV3 +#define RCC_PLLDIV_4 RCC_PLL_DIV4 + +#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE +#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG +#define RCC_MCO_NODIV RCC_MCODIV_1 +#define RCC_MCO_DIV1 RCC_MCODIV_1 +#define RCC_MCO_DIV2 RCC_MCODIV_2 +#define RCC_MCO_DIV4 RCC_MCODIV_4 +#define RCC_MCO_DIV8 RCC_MCODIV_8 +#define RCC_MCO_DIV16 RCC_MCODIV_16 +#define RCC_MCO_DIV32 RCC_MCODIV_32 +#define RCC_MCO_DIV64 RCC_MCODIV_64 +#define RCC_MCO_DIV128 RCC_MCODIV_128 +#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK +#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI +#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE +#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK +#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI +#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 +#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 +#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE +#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK +#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 + +#if defined(STM32U0) +#define RCC_SYSCLKSOURCE_STATUS_PLLR RCC_SYSCLKSOURCE_STATUS_PLLCLK +#endif + +#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL) || defined(STM32C0) || defined(STM32N6) || defined(STM32H7RS) || defined(STM32U0) +#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE +#else +#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK +#endif + +#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 +#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL +#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI +#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL +#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 +#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 +#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 + +#define HSION_BitNumber RCC_HSION_BIT_NUMBER +#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER +#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER +#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER +#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER +#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER +#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER +#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER +#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER +#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER +#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER +#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER +#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER +#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER +#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER +#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER +#define LSION_BitNumber RCC_LSION_BIT_NUMBER +#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER +#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER +#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER +#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER +#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER +#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER +#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER +#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER +#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER +#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS +#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS +#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS +#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS +#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE +#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE + +#define CR_HSION_BB RCC_CR_HSION_BB +#define CR_CSSON_BB RCC_CR_CSSON_BB +#define CR_PLLON_BB RCC_CR_PLLON_BB +#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB +#define CR_MSION_BB RCC_CR_MSION_BB +#define CSR_LSION_BB RCC_CSR_LSION_BB +#define CSR_LSEON_BB RCC_CSR_LSEON_BB +#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB +#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB +#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB +#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB +#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB +#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB +#define CR_HSEON_BB RCC_CR_HSEON_BB +#define CSR_RMVF_BB RCC_CSR_RMVF_BB +#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB +#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB + +#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE +#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE +#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE +#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE +#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE + +#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT + +#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN +#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF + +#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 +#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ +#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP +#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ +#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE +#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 + +#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE +#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED +#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET +#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET +#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE +#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED +#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED +#define DfsdmClockSelection Dfsdm1ClockSelection +#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 +#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK +#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG +#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE +#define RCC_DFSDM1CLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_SWPMI1CLKSOURCE_PCLK RCC_SWPMI1CLKSOURCE_PCLK1 +#if !defined(STM32U0) +#define RCC_LPTIM1CLKSOURCE_PCLK RCC_LPTIM1CLKSOURCE_PCLK1 +#define RCC_LPTIM2CLKSOURCE_PCLK RCC_LPTIM2CLKSOURCE_PCLK1 +#endif + +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM1AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM1AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM1AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB1 RCC_DFSDM2AUDIOCLKSOURCE_I2S1 +#define RCC_DFSDM2AUDIOCLKSOURCE_I2SAPB2 RCC_DFSDM2AUDIOCLKSOURCE_I2S2 +#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2 +#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2 +#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1 +#if defined(STM32U5) +#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL +#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL +#define __HAL_RCC_AHB21_CLK_DISABLE __HAL_RCC_AHB2_1_CLK_DISABLE +#define __HAL_RCC_AHB22_CLK_DISABLE __HAL_RCC_AHB2_2_CLK_DISABLE +#define __HAL_RCC_AHB1_CLK_Disable_Clear __HAL_RCC_AHB1_CLK_ENABLE +#define __HAL_RCC_AHB21_CLK_Disable_Clear __HAL_RCC_AHB2_1_CLK_ENABLE +#define __HAL_RCC_AHB22_CLK_Disable_Clear __HAL_RCC_AHB2_2_CLK_ENABLE +#define __HAL_RCC_AHB3_CLK_Disable_Clear __HAL_RCC_AHB3_CLK_ENABLE +#define __HAL_RCC_APB1_CLK_Disable_Clear __HAL_RCC_APB1_CLK_ENABLE +#define __HAL_RCC_APB2_CLK_Disable_Clear __HAL_RCC_APB2_CLK_ENABLE +#define __HAL_RCC_APB3_CLK_Disable_Clear __HAL_RCC_APB3_CLK_ENABLE +#define IS_RCC_MSIPLLModeSelection IS_RCC_MSIPLLMODE_SELECT +#define RCC_PERIPHCLK_CLK48 RCC_PERIPHCLK_ICLK +#define RCC_CLK48CLKSOURCE_HSI48 RCC_ICLK_CLKSOURCE_HSI48 +#define RCC_CLK48CLKSOURCE_PLL2 RCC_ICLK_CLKSOURCE_PLL2 +#define RCC_CLK48CLKSOURCE_PLL1 RCC_ICLK_CLKSOURCE_PLL1 +#define RCC_CLK48CLKSOURCE_MSIK RCC_ICLK_CLKSOURCE_MSIK +#define __HAL_RCC_ADC1_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE +#define __HAL_RCC_ADC1_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE +#define __HAL_RCC_ADC1_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED +#define __HAL_RCC_ADC1_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED +#define __HAL_RCC_ADC1_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET +#define __HAL_RCC_ADC1_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET +#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC12_CLK_SLEEP_ENABLE +#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC12_CLK_SLEEP_DISABLE +#define __HAL_RCC_GET_CLK48_SOURCE __HAL_RCC_GET_ICLK_SOURCE +#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE +#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE +#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG +#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE +#endif /* STM32U5 */ + +#if defined(STM32H5) +#define __HAL_RCC_PLLFRACN_ENABLE __HAL_RCC_PLL_FRACN_ENABLE +#define __HAL_RCC_PLLFRACN_DISABLE __HAL_RCC_PLL_FRACN_DISABLE +#define __HAL_RCC_PLLFRACN_CONFIG __HAL_RCC_PLL_FRACN_CONFIG +#define IS_RCC_PLLFRACN_VALUE IS_RCC_PLL_FRACN_VALUE + +#define RCC_PLLSOURCE_NONE RCC_PLL1_SOURCE_NONE +#define RCC_PLLSOURCE_HSI RCC_PLL1_SOURCE_HSI +#define RCC_PLLSOURCE_CSI RCC_PLL1_SOURCE_CSI +#define RCC_PLLSOURCE_HSE RCC_PLL1_SOURCE_HSE +#define RCC_PLLVCIRANGE_0 RCC_PLL1_VCIRANGE_0 +#define RCC_PLLVCIRANGE_1 RCC_PLL1_VCIRANGE_1 +#define RCC_PLLVCIRANGE_2 RCC_PLL1_VCIRANGE_2 +#define RCC_PLLVCIRANGE_3 RCC_PLL1_VCIRANGE_3 +#define RCC_PLL1VCOWIDE RCC_PLL1_VCORANGE_WIDE +#define RCC_PLL1VCOMEDIUM RCC_PLL1_VCORANGE_MEDIUM + +#define IS_RCC_PLLSOURCE IS_RCC_PLL1_SOURCE +#define IS_RCC_PLLRGE_VALUE IS_RCC_PLL1_VCIRGE_VALUE +#define IS_RCC_PLLVCORGE_VALUE IS_RCC_PLL1_VCORGE_VALUE +#define IS_RCC_PLLCLOCKOUT_VALUE IS_RCC_PLL1_CLOCKOUT_VALUE +#define IS_RCC_PLL_FRACN_VALUE IS_RCC_PLL1_FRACN_VALUE +#define IS_RCC_PLLM_VALUE IS_RCC_PLL1_DIVM_VALUE +#define IS_RCC_PLLN_VALUE IS_RCC_PLL1_MULN_VALUE +#define IS_RCC_PLLP_VALUE IS_RCC_PLL1_DIVP_VALUE +#define IS_RCC_PLLQ_VALUE IS_RCC_PLL1_DIVQ_VALUE +#define IS_RCC_PLLR_VALUE IS_RCC_PLL1_DIVR_VALUE + +#define __HAL_RCC_PLL_ENABLE __HAL_RCC_PLL1_ENABLE +#define __HAL_RCC_PLL_DISABLE __HAL_RCC_PLL1_DISABLE +#define __HAL_RCC_PLL_FRACN_ENABLE __HAL_RCC_PLL1_FRACN_ENABLE +#define __HAL_RCC_PLL_FRACN_DISABLE __HAL_RCC_PLL1_FRACN_DISABLE +#define __HAL_RCC_PLL_CONFIG __HAL_RCC_PLL1_CONFIG +#define __HAL_RCC_PLL_PLLSOURCE_CONFIG __HAL_RCC_PLL1_PLLSOURCE_CONFIG +#define __HAL_RCC_PLL_DIVM_CONFIG __HAL_RCC_PLL1_DIVM_CONFIG +#define __HAL_RCC_PLL_FRACN_CONFIG __HAL_RCC_PLL1_FRACN_CONFIG +#define __HAL_RCC_PLL_VCIRANGE __HAL_RCC_PLL1_VCIRANGE +#define __HAL_RCC_PLL_VCORANGE __HAL_RCC_PLL1_VCORANGE +#define __HAL_RCC_GET_PLL_OSCSOURCE __HAL_RCC_GET_PLL1_OSCSOURCE +#define __HAL_RCC_PLLCLKOUT_ENABLE __HAL_RCC_PLL1_CLKOUT_ENABLE +#define __HAL_RCC_PLLCLKOUT_DISABLE __HAL_RCC_PLL1_CLKOUT_DISABLE +#define __HAL_RCC_GET_PLLCLKOUT_CONFIG __HAL_RCC_GET_PLL1_CLKOUT_CONFIG + +#define __HAL_RCC_PLL2FRACN_ENABLE __HAL_RCC_PLL2_FRACN_ENABLE +#define __HAL_RCC_PLL2FRACN_DISABLE __HAL_RCC_PLL2_FRACN_DISABLE +#define __HAL_RCC_PLL2CLKOUT_ENABLE __HAL_RCC_PLL2_CLKOUT_ENABLE +#define __HAL_RCC_PLL2CLKOUT_DISABLE __HAL_RCC_PLL2_CLKOUT_DISABLE +#define __HAL_RCC_PLL2FRACN_CONFIG __HAL_RCC_PLL2_FRACN_CONFIG +#define __HAL_RCC_GET_PLL2CLKOUT_CONFIG __HAL_RCC_GET_PLL2_CLKOUT_CONFIG + +#define __HAL_RCC_PLL3FRACN_ENABLE __HAL_RCC_PLL3_FRACN_ENABLE +#define __HAL_RCC_PLL3FRACN_DISABLE __HAL_RCC_PLL3_FRACN_DISABLE +#define __HAL_RCC_PLL3CLKOUT_ENABLE __HAL_RCC_PLL3_CLKOUT_ENABLE +#define __HAL_RCC_PLL3CLKOUT_DISABLE __HAL_RCC_PLL3_CLKOUT_DISABLE +#define __HAL_RCC_PLL3FRACN_CONFIG __HAL_RCC_PLL3_FRACN_CONFIG +#define __HAL_RCC_GET_PLL3CLKOUT_CONFIG __HAL_RCC_GET_PLL3_CLKOUT_CONFIG + +#define RCC_PLL2VCIRANGE_0 RCC_PLL2_VCIRANGE_0 +#define RCC_PLL2VCIRANGE_1 RCC_PLL2_VCIRANGE_1 +#define RCC_PLL2VCIRANGE_2 RCC_PLL2_VCIRANGE_2 +#define RCC_PLL2VCIRANGE_3 RCC_PLL2_VCIRANGE_3 + +#define RCC_PLL2VCOWIDE RCC_PLL2_VCORANGE_WIDE +#define RCC_PLL2VCOMEDIUM RCC_PLL2_VCORANGE_MEDIUM + +#define RCC_PLL2SOURCE_NONE RCC_PLL2_SOURCE_NONE +#define RCC_PLL2SOURCE_HSI RCC_PLL2_SOURCE_HSI +#define RCC_PLL2SOURCE_CSI RCC_PLL2_SOURCE_CSI +#define RCC_PLL2SOURCE_HSE RCC_PLL2_SOURCE_HSE + +#define RCC_PLL3VCIRANGE_0 RCC_PLL3_VCIRANGE_0 +#define RCC_PLL3VCIRANGE_1 RCC_PLL3_VCIRANGE_1 +#define RCC_PLL3VCIRANGE_2 RCC_PLL3_VCIRANGE_2 +#define RCC_PLL3VCIRANGE_3 RCC_PLL3_VCIRANGE_3 + +#define RCC_PLL3VCOWIDE RCC_PLL3_VCORANGE_WIDE +#define RCC_PLL3VCOMEDIUM RCC_PLL3_VCORANGE_MEDIUM + +#define RCC_PLL3SOURCE_NONE RCC_PLL3_SOURCE_NONE +#define RCC_PLL3SOURCE_HSI RCC_PLL3_SOURCE_HSI +#define RCC_PLL3SOURCE_CSI RCC_PLL3_SOURCE_CSI +#define RCC_PLL3SOURCE_HSE RCC_PLL3_SOURCE_HSE + + +#endif /* STM32H5 */ + +/** + * @} + */ + +/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose + * @{ + */ +#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) + +/** + * @} + */ + +/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx)|| defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5) || defined (STM32WBA) || defined (STM32H5) || defined (STM32C0) || defined (STM32N6) || defined (STM32H7RS) || defined (STM32U0) || defined (STM32U3) +#else +#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG +#endif +#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT +#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT + +#if defined (STM32F1) +#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() + +#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() + +#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() + +#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() + +#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() +#else +#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) +#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) +#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) +#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) +#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ + (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ + __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) +#endif /* STM32F1 */ + +#if defined (STM32F0) || defined (STM32F2) || defined (STM32F3) || defined (STM32F4) || defined (STM32F7) || \ + defined (STM32H7) || \ + defined (STM32L0) || defined (STM32L1) || \ + defined (STM32WB) +#define __HAL_RTC_TAMPER_GET_IT __HAL_RTC_TAMPER_GET_FLAG +#endif + +#define IS_ALARM IS_RTC_ALARM +#define IS_ALARM_MASK IS_RTC_ALARM_MASK +#define IS_TAMPER IS_RTC_TAMPER +#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE +#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER +#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT +#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE +#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION +#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE +#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ +#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION +#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER +#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK +#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER + +#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE +#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE + +#if defined (STM32H5) +#define __HAL_RCC_RTCAPB_CLK_ENABLE __HAL_RCC_RTC_CLK_ENABLE +#define __HAL_RCC_RTCAPB_CLK_DISABLE __HAL_RCC_RTC_CLK_DISABLE +#endif /* STM32H5 */ + +/** + * @} + */ + +/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose + * @{ + */ + +#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE +#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS + +#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32L1) +#define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE +#define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE +#define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE + +#define SDMMC_NSpeed_CLK_DIV SDMMC_NSPEED_CLK_DIV +#define SDMMC_HSpeed_CLK_DIV SDMMC_HSPEED_CLK_DIV +#endif + +#if defined(STM32F4) || defined(STM32F2) +#define SD_SDMMC_DISABLED SD_SDIO_DISABLED +#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY +#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED +#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION +#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND +#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT +#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED +#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE +#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE +#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE +#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL +#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT +#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT +#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG +#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG +#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT +#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT +#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS +#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT +#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND +/* alias CMSIS */ +#define SDMMC1_IRQn SDIO_IRQn +#define SDMMC1_IRQHandler SDIO_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32L4) +#define SD_SDIO_DISABLED SD_SDMMC_DISABLED +#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY +#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED +#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION +#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND +#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT +#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED +#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE +#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE +#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE +#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE +#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT +#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT +#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG +#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG +#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT +#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT +#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS +#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT +#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND +/* alias CMSIS for compatibilities */ +#define SDIO_IRQn SDMMC1_IRQn +#define SDIO_IRQHandler SDMMC1_IRQHandler +#endif + +#if defined(STM32F7) || defined(STM32F4) || defined(STM32F2) || defined(STM32L4) || defined(STM32H7) +#define HAL_SD_CardCIDTypedef HAL_SD_CardCIDTypeDef +#define HAL_SD_CardCSDTypedef HAL_SD_CardCSDTypeDef +#define HAL_SD_CardStatusTypedef HAL_SD_CardStatusTypeDef +#define HAL_SD_CardStateTypedef HAL_SD_CardStateTypeDef +#endif + +#if defined(STM32H7) || defined(STM32L5) +#define HAL_MMCEx_Read_DMADoubleBuffer0CpltCallback HAL_MMCEx_Read_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Read_DMADoubleBuffer1CpltCallback HAL_MMCEx_Read_DMADoubleBuf1CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer0CpltCallback HAL_MMCEx_Write_DMADoubleBuf0CpltCallback +#define HAL_MMCEx_Write_DMADoubleBuffer1CpltCallback HAL_MMCEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer0CpltCallback HAL_SDEx_Read_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Read_DMADoubleBuffer1CpltCallback HAL_SDEx_Read_DMADoubleBuf1CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer0CpltCallback HAL_SDEx_Write_DMADoubleBuf0CpltCallback +#define HAL_SDEx_Write_DMADoubleBuffer1CpltCallback HAL_SDEx_Write_DMADoubleBuf1CpltCallback +#define HAL_SD_DriveTransciver_1_8V_Callback HAL_SD_DriveTransceiver_1_8V_Callback +#endif +/** + * @} + */ + +/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT +#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT +#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE +#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE +#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE +#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE + +#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE +#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE + +#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE + +/** + * @} + */ + +/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 +#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 +#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START +#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH +#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR +#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE +#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE +#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED +/** + * @} + */ + +/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_SPI_1LINE_TX SPI_1LINE_TX +#define __HAL_SPI_1LINE_RX SPI_1LINE_RX +#define __HAL_SPI_RESET_CRC SPI_RESET_CRC + +/** + * @} + */ + +/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION +#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE +#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION + +#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD + +#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE +#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE + +/** + * @} + */ + + +/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT +#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT +#define __USART_ENABLE __HAL_USART_ENABLE +#define __USART_DISABLE __HAL_USART_DISABLE + +#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE +#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE + +#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7) +#define USART_OVERSAMPLING_16 0x00000000U +#define USART_OVERSAMPLING_8 USART_CR1_OVER8 + +#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == USART_OVERSAMPLING_8)) +#endif /* STM32F0 || STM32F3 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose + * @{ + */ +#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE + +#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE +#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE +#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE + +#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE +#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE +#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE +#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE + +#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE + +#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT + +#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT +#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT +#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG +#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE +#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE +#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT + +#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup +#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup + +#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo +#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo +#if defined(STM32U5) +#define USB_OTG_GOTGCTL_BSESVLD USB_OTG_GOTGCTL_BSVLD +#define USB_OTG_GAHBCFG_GINT USB_OTG_GAHBCFG_GINTMSK +#define USB_OTG_GUSBCFG_PHYLPCS USB_OTG_GUSBCFG_PHYLPC +#define USB_OTG_GRSTCTL_HSRST USB_OTG_GRSTCTL_PSRST +#define USB_OTG_GINTSTS_BOUTNAKEFF USB_OTG_GINTSTS_GONAKEFF +#define USB_OTG_GINTSTS_WKUINT USB_OTG_GINTSTS_WKUPINT +#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM USB_OTG_GINTMSK_IPXFRM_IISOOXFRM +#define USB_OTG_GRXSTSP_EPNUM USB_OTG_GRXSTSP_EPNUM_CHNUM +#define USB_OTG_GLPMCFG_L1ResumeOK USB_OTG_GLPMCFG_L1RSMOK +#define USB_OTG_HPTXFSIZ_PTXFD USB_OTG_HPTXFSIZ_PTXFSIZ +#define USB_OTG_HCCHAR_MC USB_OTG_HCCHAR_MCNT +#define USB_OTG_HCCHAR_MC_0 USB_OTG_HCCHAR_MCNT_0 +#define USB_OTG_HCCHAR_MC_1 USB_OTG_HCCHAR_MCNT_1 +#define USB_OTG_HCINTMSK_AHBERR USB_OTG_HCINTMSK_AHBERRM +#define USB_OTG_HCTSIZ_DOPING USB_OTG_HCTSIZ_DOPNG +#define USB_OTG_DOEPMSK_OPEM USB_OTG_DOEPMSK_OUTPKTERRM +#define USB_OTG_DIEPCTL_SODDFRM USB_OTG_DIEPCTL_SD1PID_SODDFRM +#define USB_OTG_DIEPTSIZ_MULCNT USB_OTG_DIEPTSIZ_MCNT +#define USB_OTG_DOEPCTL_SODDFRM USB_OTG_DOEPCTL_SD1PID_SODDFRM +#define USB_OTG_DOEPCTL_DPID USB_OTG_DOEPCTL_DPID_EONUM +#define USB_OTG_DOEPTSIZ_STUPCNT USB_OTG_DOEPTSIZ_RXDPID +#define USB_OTG_DOEPTSIZ_STUPCNT_0 USB_OTG_DOEPTSIZ_RXDPID_0 +#define USB_OTG_DOEPTSIZ_STUPCNT_1 USB_OTG_DOEPTSIZ_RXDPID_1 +#define USB_OTG_PCGCCTL_STOPCLK USB_OTG_PCGCCTL_STPPCLK +#define USB_OTG_PCGCCTL_GATECLK USB_OTG_PCGCCTL_GATEHCLK +#endif +/** + * @} + */ + +/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE +#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE + +#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE +#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT + +#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE + +#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN +#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER +#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER +#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER +#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD +#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD +#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION +#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION +#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER +#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER +#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE +#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE + +#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 + +#define TIM_OCMODE_ASSYMETRIC_PWM1 TIM_OCMODE_ASYMMETRIC_PWM1 +#define TIM_OCMODE_ASSYMETRIC_PWM2 TIM_OCMODE_ASYMMETRIC_PWM2 +/** + * @} + */ + +/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose + * @{ + */ + +#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT +#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT +#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG +#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG +#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER +#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER + +#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE +#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE +#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE +/** + * @} + */ + +/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose + * @{ + */ +#define __HAL_LTDC_LAYER LTDC_LAYER +#define __HAL_LTDC_RELOAD_CONFIG __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG +/** + * @} + */ + +/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose + * @{ + */ +#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE +#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE +#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE +#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE +#define SAI_STREOMODE SAI_STEREOMODE +#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY +#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL +#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL +#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL +#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL +#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL +#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE +#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 +#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE +/** + * @} + */ + +/** @defgroup HAL_SPDIFRX_Aliased_Macros HAL SPDIFRX Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined(STM32H7) +#define HAL_SPDIFRX_ReceiveControlFlow HAL_SPDIFRX_ReceiveCtrlFlow +#define HAL_SPDIFRX_ReceiveControlFlow_IT HAL_SPDIFRX_ReceiveCtrlFlow_IT +#define HAL_SPDIFRX_ReceiveControlFlow_DMA HAL_SPDIFRX_ReceiveCtrlFlow_DMA +#endif +/** + * @} + */ + +/** @defgroup HAL_HRTIM_Aliased_Functions HAL HRTIM Aliased Functions maintained for legacy purpose + * @{ + */ +#if defined (STM32H7) || defined (STM32G4) || defined (STM32F3) +#define HAL_HRTIM_WaveformCounterStart_IT HAL_HRTIM_WaveformCountStart_IT +#define HAL_HRTIM_WaveformCounterStart_DMA HAL_HRTIM_WaveformCountStart_DMA +#define HAL_HRTIM_WaveformCounterStart HAL_HRTIM_WaveformCountStart +#define HAL_HRTIM_WaveformCounterStop_IT HAL_HRTIM_WaveformCountStop_IT +#define HAL_HRTIM_WaveformCounterStop_DMA HAL_HRTIM_WaveformCountStop_DMA +#define HAL_HRTIM_WaveformCounterStop HAL_HRTIM_WaveformCountStop +#endif +/** + * @} + */ + +/** @defgroup HAL_QSPI_Aliased_Macros HAL QSPI Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32L4) || defined (STM32F4) || defined (STM32F7) || defined(STM32H7) +#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE HAL_QSPI_TIMEOUT_DEFAULT_VALUE +#endif /* STM32L4 || STM32F4 || STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_Generic_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose + * @{ + */ +#if defined (STM32F7) +#define ART_ACCLERATOR_ENABLE ART_ACCELERATOR_ENABLE +#endif /* STM32F7 */ +/** + * @} + */ + +/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_HAL_LEGACY */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32_assert_template.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32_assert_template.h new file mode 100644 index 0000000000..1d2381db96 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32_assert_template.h @@ -0,0 +1,53 @@ +/** + ****************************************************************************** + * @file stm32_assert.h + * @author MCD Application Team + * @brief STM32 assert template file. + * This file should be copied to the application folder and renamed + * to stm32_assert.h. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32_ASSERT_H +#define STM32_ASSERT_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Includes ------------------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32_ASSERT_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal.h new file mode 100644 index 0000000000..a85484fdfa --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal.h @@ -0,0 +1,347 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the HAL + * module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_H +#define STM32WL3x_HAL_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_conf.h" +#include "stm32wl3x_ll_system.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @{ + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup HAL_Exported_Constants HAL Exported Constants + * @{ + */ +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ +/** + * @brief HAL Driver version number + */ +#define __STM32WL3X_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */ +#define __STM32WL3X_HAL_VERSION_SUB1 (0x02U) /*!< [23:16] sub1 version */ +#define __STM32WL3X_HAL_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */ +#define __STM32WL3X_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */ +#define __STM32WL3X_HAL_VERSION ((__STM32WL3X_HAL_VERSION_MAIN << 24U)\ + |(__STM32WL3X_HAL_VERSION_SUB1 << 16U)\ + |(__STM32WL3X_HAL_VERSION_SUB2 << 8U )\ + |(__STM32WL3X_HAL_VERSION_RC)) + +/** + * @} + */ + + +/** @defgroup HAL_TICK_FREQ Tick Frequency + * @{ + */ +typedef enum +{ + HAL_TICK_FREQ_10HZ = 100U, + HAL_TICK_FREQ_100HZ = 10U, + HAL_TICK_FREQ_1KHZ = 1U, + HAL_TICK_FREQ_DEFAULT = HAL_TICK_FREQ_1KHZ +} HAL_TickFreqTypeDef; + +/** + * @} + */ + + +/** @defgroup SYSCFG_Exported_Constants SYSCFG Exported Constants + * @{ + */ + +/** @defgroup SYSCFG_BootMode BOOT Mode + * @{ + */ +#define SYSCFG_BOOT_MAINFLASH LL_SYSCFG_REMAP_FLASH /*!< Main Flash memory mapped at 0x00000000 */ +#define SYSCFG_BOOT_SRAM LL_SYSCFG_REMAP_SRAM /*!< SRAM1 mapped at 0x00000000 */ + +/** + * @} + */ + +/** @defgroup SYSCFG_FastModePlus_GPIO Fast-mode Plus on GPIO + * @{ + */ + +/** @brief Fast-mode Plus driving capability on a specific GPIO + */ +#if defined(I2C1) +#define SYSCFG_FASTMODEPLUS_PA0 SYSCFG_I2C_FMP_CTRL_I2C1_PA0_FMP /*!< Enable Fast-mode Plus on PA0 */ +#define SYSCFG_FASTMODEPLUS_PA1 SYSCFG_I2C_FMP_CTRL_I2C1_PA1_FMP /*!< Enable Fast Mode Plus on PA1 */ +#define SYSCFG_FASTMODEPLUS_PB6 SYSCFG_I2C_FMP_CTRL_I2C1_PB6_FMP /*!< Enable Fast-mode Plus on PB6 */ +#define SYSCFG_FASTMODEPLUS_PB7 SYSCFG_I2C_FMP_CTRL_I2C1_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#define SYSCFG_FASTMODEPLUS_PB10 SYSCFG_I2C_FMP_CTRL_I2C1_PB10_FMP /*!< Enable Fast Mode Plus on PB10 */ +#define SYSCFG_FASTMODEPLUS_PB11 SYSCFG_I2C_FMP_CTRL_I2C1_PB11_FMP /*!< Enable Fast Mode Plus on PB11 */ +#endif +#if defined(I2C2) +#define SYSCFG_FASTMODEPLUS_PA6 SYSCFG_I2C_FMP_CTRL_I2C2_PA6_FMP /*!< Enable Fast Mode Plus on PA6 */ +#define SYSCFG_FASTMODEPLUS_PA7 SYSCFG_I2C_FMP_CTRL_I2C2_PA7_FMP /*!< Enable Fast Mode Plus on PA7 */ +#define SYSCFG_FASTMODEPLUS_PA13 SYSCFG_I2C_FMP_CTRL_I2C2_PA13_FMP /*!< Enable Fast Mode Plus on PA13 */ +#define SYSCFG_FASTMODEPLUS_PA14 SYSCFG_I2C_FMP_CTRL_I2C2_PA14_FMP /*!< Enable Fast Mode Plus on PA14 */ +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup HAL_Exported_Macros HAL Exported Macros + * @{ + */ + +/** @defgroup DBG_Exported_Macros DBG Exported Macros + * @{ + */ + +/** @brief Freeze and Unfreeze Peripherals in Debug mode + */ + +#if defined(LL_DBGMCU_APB0_GRP1_TIM2_STOP) +#define __HAL_DBGMCU_FREEZE_TIM2() LL_DBGMCU_APB0_GRP1_FreezePeriph(LL_DBGMCU_APB0_GRP1_TIM2_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM2() LL_DBGMCU_APB0_GRP1_UnFreezePeriph(LL_DBGMCU_APB0_GRP1_TIM2_STOP) +#endif + +#if defined(LL_DBGMCU_APB0_GRP1_TIM16_STOP) +#define __HAL_DBGMCU_FREEZE_TIM16() LL_DBGMCU_APB0_GRP1_FreezePeriph(LL_DBGMCU_APB0_GRP1_TIM16_STOP) +#define __HAL_DBGMCU_UNFREEZE_TIM16() LL_DBGMCU_APB0_GRP1_UnFreezePeriph(LL_DBGMCU_APB0_GRP1_TIM16_STOP) +#endif + +#if defined(LL_DBGMCU_APB0_GRP1_RTC_STOP) +#define __HAL_DBGMCU_FREEZE_RTC() LL_DBGMCU_APB0_GRP1_FreezePeriph(LL_DBGMCU_APB0_GRP1_RTC_STOP) +#define __HAL_DBGMCU_UNFREEZE_RTC() LL_DBGMCU_APB0_GRP1_UnFreezePeriph(LL_DBGMCU_APB0_GRP1_RTC_STOP) +#endif + +#if defined(LL_DBGMCU_APB0_GRP1_IWDG_STOP) +#define __HAL_DBGMCU_FREEZE_IWDG() LL_DBGMCU_APB0_GRP1_FreezePeriph(LL_DBGMCU_APB0_GRP1_IWDG_STOP) +#define __HAL_DBGMCU_UNFREEZE_IWDG() LL_DBGMCU_APB0_GRP1_UnFreezePeriph(LL_DBGMCU_APB0_GRP1_IWDG_STOP) +#endif + +#if defined(LL_DBGMCU_APB1_GRP1_I2C1_STOP) +#define __HAL_DBGMCU_FREEZE_I2C1() LL_DBGMCU_APB1_GRP1_FreezePeriph(LL_DBGMCU_APB1_GRP1_I2C1_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C1() LL_DBGMCU_APB1_GRP1_UnFreezePeriph(LL_DBGMCU_APB1_GRP1_I2C1_STOP) +#endif + +#if defined(LL_DBGMCU_APB1_GRP1_I2C2_STOP) +#define __HAL_DBGMCU_FREEZE_I2C2() LL_DBGMCU_APB1_GRP1_FreezePeriph(LL_DBGMCU_APB1_GRP1_I2C2_STOP) +#define __HAL_DBGMCU_UNFREEZE_I2C2() LL_DBGMCU_APB1_GRP1_UnFreezePeriph(LL_DBGMCU_APB1_GRP1_I2C2_STOP) +#endif + +/** @brief Main Flash memory mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_FLASH() LL_SYSCFG_SetRemapMemory(LL_SYSCFG_REMAP_FLASH) + +/** @brief Embedded SRAM mapped at 0x00000000 + */ +#define __HAL_SYSCFG_REMAPMEMORY_SRAM() LL_SYSCFG_SetRemapMemory(LL_SYSCFG_REMAP_SRAM) + + +/** + * @brief Return the boot mode as configured by user. + * @retval The boot mode as configured by user. The returned value can be one + * of the following values: + * @arg @ref SYSCFG_BOOT_MAINFLASH + * @arg @ref SYSCFG_BOOT_SRAM + */ +#define __HAL_SYSCFG_GET_BOOT_MODE() LL_SYSCFG_GetRemapMemory() + + +/** @brief Fast mode Plus driving capability enable/disable macros + * @param __FASTMODEPLUS__ This parameter can be a value of @ref SYSCFG_FastModePlus_GPIO + */ +#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__))); \ + LL_SYSCFG_EnableFastModePlus(__FASTMODEPLUS__); \ + }while(0) + +#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_SYSCFG_FASTMODEPLUS((__FASTMODEPLUS__))); \ + LL_SYSCFG_DisableFastModePlus(__FASTMODEPLUS__); \ + }while(0) + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ + +/** @defgroup SYSCFG_Private_Macros SYSCFG Private Macros + * @{ + */ + +#define IS_SYSCFG_FASTMODEPLUS(__PIN__) ((((__PIN__) & SYSCFG_FASTMODEPLUS_PA0) == SYSCFG_FASTMODEPLUS_PA0) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA1) == SYSCFG_FASTMODEPLUS_PA1) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB6) == SYSCFG_FASTMODEPLUS_PB6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB7) == SYSCFG_FASTMODEPLUS_PB7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB10) == SYSCFG_FASTMODEPLUS_PB10)|| \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PB11) == SYSCFG_FASTMODEPLUS_PB11)|| \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA6) == SYSCFG_FASTMODEPLUS_PA6) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA7) == SYSCFG_FASTMODEPLUS_PA7) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA13) == SYSCFG_FASTMODEPLUS_PA13) || \ + (((__PIN__) & SYSCFG_FASTMODEPLUS_PA14) == SYSCFG_FASTMODEPLUS_PA14)) +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup HAL_Private_Macros HAL Private Macros + * @{ + */ +#define IS_TICKFREQ(FREQ) (((FREQ) == HAL_TICK_FREQ_10HZ) || \ + ((FREQ) == HAL_TICK_FREQ_100HZ) || \ + ((FREQ) == HAL_TICK_FREQ_1KHZ)) +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 HAL Initialization and Configuration functions + * @{ + */ + +/* Initialization and Configuration functions ******************************/ +HAL_StatusTypeDef HAL_Init(void); +HAL_StatusTypeDef HAL_DeInit(void); +void HAL_MspInit(void); +void HAL_MspDeInit(void); + +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority); + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_IncTick(void); +void HAL_Delay(uint32_t Delay); +uint32_t HAL_GetTick(void); +uint32_t HAL_GetTickPrio(void); +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq); +HAL_TickFreqTypeDef HAL_GetTickFreq(void); +void HAL_SuspendTick(void); +void HAL_ResumeTick(void); +uint32_t HAL_GetHalVersion(void); +uint32_t HAL_GetREVID(void); +uint32_t HAL_GetVERID(void); +uint32_t HAL_GetDEVID(void); +uint32_t HAL_GetJTAGID(void); +uint32_t HAL_GetUIDw0(void); +uint32_t HAL_GetUIDw1(void); +uint32_t HAL_GetUIDw2(void); + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group3 DBGMCU Control functions + * @{ + */ + +/* DBGMCU Peripheral Control functions *****************************************/ +void HAL_DBGMCU_EnableDBGStopMode(void); +void HAL_DBGMCU_DisableDBGStopMode(void); +void HAL_DBGMCU_EnableDBGSleepMode(void); +void HAL_DBGMCU_DisableDBGSleepMode(void); +/** + * @} + */ + +/* Exported variables ---------------------------------------------------------*/ +/** @addtogroup HAL_Exported_Variables + * @{ + */ +extern __IO uint32_t uwTick; +extern uint32_t uwTickPrio; +extern HAL_TickFreqTypeDef uwTickFreq; + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group4 SYSCFG configuration functions + * @{ + */ + +/* SYSCFG Control functions ****************************************************/ + +void HAL_SYSCFG_EnableIOAnalogSwitchControl_PB14(void); +void HAL_SYSCFG_DisableIOAnalogSwitchControl_PB14(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_adc.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_adc.h new file mode 100644 index 0000000000..bf1e9e68bb --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_adc.h @@ -0,0 +1,1232 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_adc.h + * @author GPM Application Team + * @brief Header file of ADC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_ADC_H +#define STM32WL3x_HAL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ + +/* Include low level driver */ +#include "stm32wl3x_ll_adc.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADC_Exported_Types ADC Exported Types + * @{ + */ + +/** + * @brief Structure definition for the configuration of the ADC watchdog. + */ +typedef struct +{ + uint32_t LowThreshold; /*!< Set the lower threshold for the watchdog. + This parameter is a 12-bit value. */ + + uint32_t HighThreshold; /*!< Set the higher threshold for the watchdog. + This parameter is a 12-bit value. */ + + uint32_t ChannelMask; /*!< Select the input channels the watchdog has to use. + This parameter can be a value of @ref ADC_AWD_CHANNEL. */ + + uint32_t EventType; /*!< Select the event type used for the watchdog. + This parameter can be a value of @ref ADC_AWD_EVENTTYPE. */ + +} ADC_AnalogWDGConfTypeDef; + +/** + * @brief Structure definition with the setting for the Calibration Point(). + */ +typedef struct +{ + uint32_t Number; /*!< Select the calibration point number + This parameter can be a value of @ref ADC_HAL_CALIB_POINT + Caution: Only one offset is allowed per input mode (Single positive, single + negative and differential) and voltage range. This parameter + overwrites the last setting. + Note: Use the ADC_CALIB_NONE to skip calibration parameter for this channel + and leave offset and gain untouched. */ + + uint32_t Offset; /*!< Define the offset to be subtracted from the raw converted data. + Offset value must be a positive number. + This parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. */ + + uint32_t Gain; /*!< Specify the ADC gain compensation coefficient to be applied to ADC raw + conversion data, based on following formula: + DATA = DATA(raw) * (gain compensation coef) / 4096 + This parameter value can be: + - value "0": Gain will be set to default parameters + - value in range [0x001; 0xFFF]: Gain compensation will be set to specified + value */ + +} ADC_CalibrationPointTypeDef; + +/** + * @brief Structure definition for the configuration of the ADC watchdog. + */ +typedef struct +{ + uint32_t Channel; /*!< Specify the channel type the channel number code for the 1st + conversion of the sequence. + This parameter can be a value of @ref ADC_HAL_CH_NUM_CODE. */ + + uint32_t Rank; /*!< Assign a specific sequence number to the channel. + This parameter can be a value of @ref ADC_HAL_EC_SEQ_RANKS. */ + + uint32_t VoltRange; /*!< Specify the voltage range for the selected channel. + This parameter can be a value of + @ref ADC_HAL_INPUT_VOLTAGE_RANGE. */ + + ADC_CalibrationPointTypeDef CalibrationPoint; /*!< Specify the calibration parameter for the selected channel. */ + +} ADC_ChannelConfTypeDef; + +/** + * @brief Structure definition with the setting for the Down Sampler (DS). + */ +typedef struct +{ + uint32_t DataWidth; /*!< Specify the width of the output data from the Down Sampler (DS). + This parameter can be a value of @ref ADC_HAL_DS_DATA_WIDTH. */ + + uint32_t DataRatio; /*!< Specify the ratio of the output data from the Down Sampler (DS). + This parameter can be a value of @ref ADC_HAL_DS_RATIO. */ + +} ADC_DSConfTypeDef; + +/** + * @brief Structure definition with common setting for the ADC. + */ +typedef struct +{ + FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) + or continuous mode for ADC group regular, after the first ADC conversion + start trigger occurred (software start or external trigger). This parameter + can be set to ENABLE or DISABLE. */ + + uint32_t SequenceLength; /*!< Specify the length of the conversion sequence. + This parameter must be a number between Min_Data = 1 and + Max_Data = 16. */ + + uint32_t SamplingMode; /*!< Specifies the input sampling mode. + This parameter can be a value of @ref ADC_HAL_SAMPLING_METHOD. */ + + uint32_t SampleRate; /*!< Specify the ADC sample rate. + This parameter can be a value of @ref ADC_HAL_SAMPLE_RATE. */ + + ADC_DSConfTypeDef DownSamplerConfig; /*!< Specifies the Down Sampler parameters. */ + + uint32_t InvertOutputMode; /*!< Specifies the bit to bit inversion (1' complement) for + differential input and/or single negative input. + This parameter can be a value of @ref ADC_HAL_DATA_INVERT. */ + + uint32_t Overrun; /*!< Specifies the overrung policy applied to the data. + This parameter can be a value of @ref ADC_HAL_OVERRUN_CONFIG. */ + + +} ADC_InitTypeDef; + +/** + * @brief ADC handle Structure definition + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +typedef struct __ADC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +{ + ADC_TypeDef *Instance; /*!< Register base address */ + ADC_InitTypeDef Init; /*!< Parameters for ADC initialization */ + + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ + + HAL_LockTypeDef Lock; /*!< ADC locking object */ + __IO uint32_t State; /*!< ADC communication state (bitmap of ADC states) */ + __IO uint32_t ErrorCode; /*!< ADC Error code */ + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion complete callback */ + void (* ConvHalfCpltCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC conversion DMA half-transfer callback */ + void (* LevelOutOfWindowCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC analog watchdog 1 callback */ + void (* ErrorCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC error callback */ + void (* MspInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp Init callback */ + void (* MspDeInitCallback)(struct __ADC_HandleTypeDef *hadc); /*!< ADC Msp DeInit callback */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +} ADC_HandleTypeDef; + + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL ADC Callback ID enumeration definition + */ +typedef enum +{ + HAL_ADC_CONVERSION_COMPLETE_CB_ID = 0x00U, /*!< ADC conversion complete callback ID */ + HAL_ADC_CONVERSION_HALF_CB_ID = 0x01U, /*!< ADC conversion DMA half-transfer callback ID */ + HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID = 0x02U, /*!< ADC watchdog callback ID */ + HAL_ADC_ERROR_CB_ID = 0x03U, /*!< ADC error callback ID */ + HAL_ADC_MSPINIT_CB_ID = 0x09U, /*!< ADC Msp Init callback ID */ + HAL_ADC_MSPDEINIT_CB_ID = 0x0AU /*!< ADC Msp DeInit callback ID */ +} HAL_ADC_CallbackIDTypeDef; + +/** + * @brief HAL ADC Callback pointer definition + */ +typedef void (*pADC_CallbackTypeDef)(ADC_HandleTypeDef *hadc); /*!< pointer to a ADC callback function */ + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants ADC Exported Constants + * @{ + */ + +/** @defgroup ADC_States ADC States + * @{ + */ + +/** + * @brief HAL ADC state machine: ADC states definition (bitfields) + * @note ADC state machine is managed by bitfields, state must be compared + * with bit by bit. + * For example: + * " if ((HAL_ADC_GetState(hadc) & HAL_ADC_STATEBUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc) & HAL_ADC_STATE_AWD1) != 0UL) " + */ +/* States of ADC global scope */ +#define HAL_ADC_STATE_RESET (0x00000000UL) /*!< ADC not yet initialized or disabled */ +#define HAL_ADC_STATE_READY (0x00000001UL) /*!< ADC peripheral ready to use */ +#define HAL_ADC_STATE_BUSY_INTERNAL (0x00000002UL) /*!< ADC is busy due to an internal process (initialization, calibration) */ +#define HAL_ADC_STATE_TIMEOUT (0x00000004UL) /*!< TimeOut occurrence */ + +/* States of ADC errors */ +#define HAL_ADC_STATE_ERROR_INTERNAL (0x00000010UL) /*!< Internal error occurrence */ +#define HAL_ADC_STATE_ERROR_CONFIG (0x00000020UL) /*!< Configuration error occurrence */ +#define HAL_ADC_STATE_ERROR_DMA (0x00000040UL) /*!< DMA error occurrence */ + +/* States of ADC conversion */ +#define HAL_ADC_STATE_DS_BUSY (0x00000100UL) /*!< A conversion on down sampler data path is ongoing or can + occur */ +#define HAL_ADC_STATE_DS_EOC (0x00000200UL) /*!< Converted data available in downsampler data register */ +#define HAL_ADC_STATE_DS_OVR (0x00000400UL) /*!< Overrun on down sampler data path occurrence */ + + +/* States of ADC analog watchdog */ +#define HAL_ADC_STATE_AWD1 (0x00010000UL) /*!< Out-of-window occurrence of ADC analog watchdog */ + +/** + * @} + */ + + +/** @defgroup ADC_Error_Code ADC Error Code + * @{ + */ + +#define HAL_ADC_ERROR_NONE (0x00U) /*!< No error */ +#define HAL_ADC_ERROR_INTERNAL (0x01U) /*!< Internal error */ +#define HAL_ADC_ERROR_OVR (0x02U) /*!< Data overrun error */ +#define HAL_ADC_ERROR_DMA (0x04U) /*!< DMA transfer error */ + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define HAL_ADC_ERROR_INVALID_CALLBACK (0x10U) /*!< Invalid Callback error */ +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#define ADC_DEFAULT_LDO_DELAY_US (160UL) /*!< Default delay for LDO stabilization (uS)*/ + +/** @defgroup ADC_HAL_CH_NUM_CODE ADC channel number code for conversion definitions + * @{ + */ + +#define ADC_CHANNEL_VINM0 (LL_ADC_CHANNEL_VINM0) /*!< ADC channel for VINM0 to single negative input */ +#define ADC_CHANNEL_VINM1 (LL_ADC_CHANNEL_VINM1) /*!< ADC channel for VINM1 to single negative input */ +#define ADC_CHANNEL_VINM2 (LL_ADC_CHANNEL_VINM2) /*!< ADC channel for VINM2 to single negative input */ +#define ADC_CHANNEL_VINM3 (LL_ADC_CHANNEL_VINM3) /*!< ADC channel for VINM3 to single negative input */ +#define ADC_CHANNEL_VINP0 (LL_ADC_CHANNEL_VINP0) /*!< ADC channel for VINP0 to single positive input */ +#define ADC_CHANNEL_VINP1 (LL_ADC_CHANNEL_VINP1) /*!< ADC channel for VINP1 to single positive input */ +#define ADC_CHANNEL_VINP2 (LL_ADC_CHANNEL_VINP2) /*!< ADC channel for VINP2 to single positive input */ +#define ADC_CHANNEL_VINP3 (LL_ADC_CHANNEL_VINP3) /*!< ADC channel for VINP3 to single positive input */ +#define ADC_CHANNEL_VINP0_VINM0 (LL_ADC_CHANNEL_VINP0_VINM0) /*!< ADC channel for VINP0 - VINM0 to differential input */ +#define ADC_CHANNEL_VINP1_VINM1 (LL_ADC_CHANNEL_VINP1_VINM1) /*!< ADC channel for VINP1 - VINM1 to differential input */ +#define ADC_CHANNEL_VINP2_VINM2 (LL_ADC_CHANNEL_VINP2_VINM2) /*!< ADC channel for VINP2 - VINM2 to differential input */ +#define ADC_CHANNEL_VINP3_VINM3 (LL_ADC_CHANNEL_VINP3_VINM3) /*!< ADC channel for VINP3 - VINM3 to differential input */ +#define ADC_CHANNEL_VBAT (LL_ADC_CHANNEL_VBAT) /*!< ADC channel for VBAT, battery level detector */ +#define ADC_CHANNEL_TEMPSENSOR (LL_ADC_CHANNEL_TEMPSENSOR) /*!< ADC channel for temperature sensor */ + +/** + * @} + */ + +/** @defgroup ADC_HAL_SAMPLING_METHOD ADC input sampling method definitions + * @{ + */ + +#define ADC_SAMPLING_AT_START (LL_ADC_SAMPLING_AT_START) /*!< Sampling only at conversion start (default) */ +#define ADC_SAMPLING_AT_END (LL_ADC_SAMPLING_AT_END) /*!< Sampling sampling phase starts after end of + conversion, and stops upon trigger event + (Also known as Bulb sampling mode). */ + +/** + * @} + */ + + +/** @defgroup ADC_HAL_OVERRUN_CONFIG ADC overrun configuration definitions + * @{ + */ +#define ADC_NEW_DATA_IS_LOST (LL_ADC_NEW_DATA_IS_LOST) /*!< Previous data is preserved, new data is lost. */ +#define ADC_NEW_DATA_IS_KEPT (LL_ADC_NEW_DATA_IS_KEPT) /*!< Previous data is overwritten, new data is kept. */ + +/** + * @} + */ + + +/** @defgroup ADC_HAL_DATA_INVERT ADC invert bit to bit data output for differential or + * single negative input (1' complement) definitions + * @{ + */ + +#define ADC_DATA_INVERT_NONE (0x00UL) /*!< No inversion */ +#define ADC_DATA_INVERT_DIFF (0x01UL) /*!< Inversion only for differential input */ +#define ADC_DATA_INVERT_SING (0x02UL) /*!< Inversion only for single negative input */ +#define ADC_DATA_INVERT_BOTH (0x03UL) /*!< Inversion for both input type */ + +/** + * @} + */ + +/** @defgroup ADC_HAL_SAMPLE_RATE ADC sample rate definitions + * @{ + */ +#define ADC_SAMPLE_RATE_16 (LL_ADC_SAMPLE_RATE_16) /*!< ADC conversion rate at F_ADC_CLK / 16 */ +#define ADC_SAMPLE_RATE_20 (LL_ADC_SAMPLE_RATE_20) /*!< ADC conversion rate at F_ADC_CLK / 20 */ +#define ADC_SAMPLE_RATE_24 (LL_ADC_SAMPLE_RATE_24) /*!< ADC conversion rate at F_ADC_CLK / 24 */ +#define ADC_SAMPLE_RATE_28 (LL_ADC_SAMPLE_RATE_28) /*!< ADC conversion rate at F_ADC_CLK / 28 */ +#define ADC_SAMPLE_RATE_32 (LL_ADC_SAMPLE_RATE_32) /*!< ADC conversion rate at F_ADC_CLK / 32 */ +#define ADC_SAMPLE_RATE_36 (LL_ADC_SAMPLE_RATE_36) /*!< ADC conversion rate at F_ADC_CLK / 36 */ +#define ADC_SAMPLE_RATE_40 (LL_ADC_SAMPLE_RATE_40) /*!< ADC conversion rate at F_ADC_CLK / 40 */ +#define ADC_SAMPLE_RATE_44 (LL_ADC_SAMPLE_RATE_44) /*!< ADC conversion rate at F_ADC_CLK / 44 */ +#define ADC_SAMPLE_RATE_48 (LL_ADC_SAMPLE_RATE_48) /*!< ADC conversion rate at F_ADC_CLK / 48 */ +#define ADC_SAMPLE_RATE_52 (LL_ADC_SAMPLE_RATE_52) /*!< ADC conversion rate at F_ADC_CLK / 52 */ +#define ADC_SAMPLE_RATE_56 (LL_ADC_SAMPLE_RATE_56) /*!< ADC conversion rate at F_ADC_CLK / 56 */ +#define ADC_SAMPLE_RATE_60 (LL_ADC_SAMPLE_RATE_60) /*!< ADC conversion rate at F_ADC_CLK / 60 */ +#define ADC_SAMPLE_RATE_64 (LL_ADC_SAMPLE_RATE_64) /*!< ADC conversion rate at F_ADC_CLK / 64 */ +#define ADC_SAMPLE_RATE_68 (LL_ADC_SAMPLE_RATE_68) /*!< ADC conversion rate at F_ADC_CLK / 68 */ +#define ADC_SAMPLE_RATE_72 (LL_ADC_SAMPLE_RATE_72) /*!< ADC conversion rate at F_ADC_CLK / 72 */ +#define ADC_SAMPLE_RATE_76 (LL_ADC_SAMPLE_RATE_76) /*!< ADC conversion rate at F_ADC_CLK / 76 */ +#define ADC_SAMPLE_RATE_80 (LL_ADC_SAMPLE_RATE_80) /*!< ADC conversion rate at F_ADC_CLK / 80 */ +#define ADC_SAMPLE_RATE_84 (LL_ADC_SAMPLE_RATE_84) /*!< ADC conversion rate at F_ADC_CLK / 84 */ +#define ADC_SAMPLE_RATE_88 (LL_ADC_SAMPLE_RATE_88) /*!< ADC conversion rate at F_ADC_CLK / 88 */ +#define ADC_SAMPLE_RATE_92 (LL_ADC_SAMPLE_RATE_92) /*!< ADC conversion rate at F_ADC_CLK / 92 */ +#define ADC_SAMPLE_RATE_96 (LL_ADC_SAMPLE_RATE_96) /*!< ADC conversion rate at F_ADC_CLK / 96 */ +#define ADC_SAMPLE_RATE_100 (LL_ADC_SAMPLE_RATE_100) /*!< ADC conversion rate at F_ADC_CLK / 100 */ +#define ADC_SAMPLE_RATE_104 (LL_ADC_SAMPLE_RATE_104) /*!< ADC conversion rate at F_ADC_CLK / 104 */ +#define ADC_SAMPLE_RATE_108 (LL_ADC_SAMPLE_RATE_108) /*!< ADC conversion rate at F_ADC_CLK / 108 */ +#define ADC_SAMPLE_RATE_112 (LL_ADC_SAMPLE_RATE_112) /*!< ADC conversion rate at F_ADC_CLK / 112 */ +#define ADC_SAMPLE_RATE_116 (LL_ADC_SAMPLE_RATE_116) /*!< ADC conversion rate at F_ADC_CLK / 116 */ +#define ADC_SAMPLE_RATE_120 (LL_ADC_SAMPLE_RATE_120) /*!< ADC conversion rate at F_ADC_CLK / 120 */ +#define ADC_SAMPLE_RATE_124 (LL_ADC_SAMPLE_RATE_124) /*!< ADC conversion rate at F_ADC_CLK / 124 */ +#define ADC_SAMPLE_RATE_128 (LL_ADC_SAMPLE_RATE_128) /*!< ADC conversion rate at F_ADC_CLK / 128 */ +#define ADC_SAMPLE_RATE_132 (LL_ADC_SAMPLE_RATE_132) /*!< ADC conversion rate at F_ADC_CLK / 132 */ +#define ADC_SAMPLE_RATE_136 (LL_ADC_SAMPLE_RATE_136) /*!< ADC conversion rate at F_ADC_CLK / 136 */ +#define ADC_SAMPLE_RATE_140 (LL_ADC_SAMPLE_RATE_140) /*!< ADC conversion rate at F_ADC_CLK / 140 */ +/** + * @} + */ + + +/** @defgroup ADC_HAL_OP_MODE ADC operation modes definitions + * @{ + */ + +#define ADC_OP_MODE_ADC (LL_ADC_OP_MODE_ADC) /*!< ADC operation mode ADC */ + +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_SEQ_RANKS ADC Sequencer ranks + * @{ + */ + +#define ADC_RANK_1 (LL_ADC_RANK_1) /*!< ADC sequencer rank 1 */ +#define ADC_RANK_2 (LL_ADC_RANK_2) /*!< ADC sequencer rank 2 */ +#define ADC_RANK_3 (LL_ADC_RANK_3) /*!< ADC sequencer rank 3 */ +#define ADC_RANK_4 (LL_ADC_RANK_4) /*!< ADC sequencer rank 4 */ +#define ADC_RANK_5 (LL_ADC_RANK_5) /*!< ADC sequencer rank 5 */ +#define ADC_RANK_6 (LL_ADC_RANK_6) /*!< ADC sequencer rank 6 */ +#define ADC_RANK_7 (LL_ADC_RANK_7) /*!< ADC sequencer rank 7 */ +#define ADC_RANK_8 (LL_ADC_RANK_8) /*!< ADC sequencer rank 8 */ +#define ADC_RANK_9 (LL_ADC_RANK_9) /*!< ADC sequencer rank 9 */ +#define ADC_RANK_10 (LL_ADC_RANK_10) /*!< ADC sequencer rank 10 */ +#define ADC_RANK_11 (LL_ADC_RANK_11) /*!< ADC sequencer rank 11 */ +#define ADC_RANK_12 (LL_ADC_RANK_12) /*!< ADC sequencer rank 12 */ +#define ADC_RANK_13 (LL_ADC_RANK_13) /*!< ADC sequencer rank 13 */ +#define ADC_RANK_14 (LL_ADC_RANK_14) /*!< ADC sequencer rank 14 */ +#define ADC_RANK_15 (LL_ADC_RANK_15) /*!< ADC sequencer rank 15 */ +#define ADC_RANK_16 (LL_ADC_RANK_16) /*!< ADC sequencer rank 16 */ + +/** + * @} + */ + + +/** @defgroup ADC_HAL_INPUT_VOLTAGE_RANGE ADC input voltage range definitions + * @{ + */ + +#define ADC_VIN_RANGE_1V2 (LL_ADC_VIN_RANGE_1V2) /*!< ADC input voltage range up to 1.2 V */ +#define ADC_VIN_RANGE_2V4 (LL_ADC_VIN_RANGE_2V4) /*!< ADC input voltage range up to 2.4 V */ +#define ADC_VIN_RANGE_3V6 (LL_ADC_VIN_RANGE_3V6) /*!< ADC input voltage range up to 3.6 V */ + +/** + * @} + */ + + +/** @defgroup ADC_HAL_DS_DATA_WIDTH ADC Down Sampler data width definitions + * @{ + */ + +#define ADC_DS_DATA_WIDTH_12_BIT (LL_ADC_DS_DATA_WIDTH_12_BIT) /*!< ADC Down Sampler data width 12 bits */ +#define ADC_DS_DATA_WIDTH_13_BIT (LL_ADC_DS_DATA_WIDTH_13_BIT) /*!< ADC Down Sampler data width 13 bits */ +#define ADC_DS_DATA_WIDTH_14_BIT (LL_ADC_DS_DATA_WIDTH_14_BIT) /*!< ADC Down Sampler data width 14 bits */ +#define ADC_DS_DATA_WIDTH_15_BIT (LL_ADC_DS_DATA_WIDTH_15_BIT) /*!< ADC Down Sampler data width 15 bits */ +#define ADC_DS_DATA_WIDTH_16_BIT (LL_ADC_DS_DATA_WIDTH_16_BIT) /*!< ADC Down Sampler data width 16 bits */ + +/** + * @} + */ + + +/** @defgroup ADC_HAL_DS_RATIO ADC Down Sampler ratio definitions + * @{ + */ + +#define ADC_DS_RATIO_1 (LL_ADC_DS_RATIO_1) /*!< ADC Down Sampler ratio 1, no down sampling (default) */ +#define ADC_DS_RATIO_2 (LL_ADC_DS_RATIO_2) /*!< ADC Down Sampler ratio 2 */ +#define ADC_DS_RATIO_4 (LL_ADC_DS_RATIO_4) /*!< ADC Down Sampler ratio 4 */ +#define ADC_DS_RATIO_8 (LL_ADC_DS_RATIO_8) /*!< ADC Down Sampler ratio 8 */ +#define ADC_DS_RATIO_16 (LL_ADC_DS_RATIO_16) /*!< ADC Down Sampler ratio 16 */ +#define ADC_DS_RATIO_32 (LL_ADC_DS_RATIO_32) /*!< ADC Down Sampler ratio 32 */ +#define ADC_DS_RATIO_64 (LL_ADC_DS_RATIO_64) /*!< ADC Down Sampler ratio 64 */ +#define ADC_DS_RATIO_128 (LL_ADC_DS_RATIO_128) /*!< ADC Down Sampler ratio 128 */ + +/** + * @} + */ + + +/** @defgroup ADC_HAL_CALIB_POINT ADC calibration points definitions + * @{ + */ + +#define ADC_CALIB_POINT_1 (LL_ADC_CALIB_POINT_1) /*!< ADC calibration point 1 */ +#define ADC_CALIB_POINT_2 (LL_ADC_CALIB_POINT_2) /*!< ADC calibration point 2 */ +#define ADC_CALIB_POINT_3 (LL_ADC_CALIB_POINT_3) /*!< ADC calibration point 3 */ +#define ADC_CALIB_POINT_4 (LL_ADC_CALIB_POINT_4) /*!< ADC calibration point 4 */ +#define ADC_CALIB_NONE (LL_ADC_CALIB_POINT_1 \ + | LL_ADC_CALIB_POINT_2 \ + | LL_ADC_CALIB_POINT_3 \ + | LL_ADC_CALIB_POINT_4) /*!< ADC calibration point disabled: correction are left untouched + for the selected channel */ + +/** + * @} + */ + + +/** @defgroup ADC_AWD_CHANNEL ADC watchdog channel selection for bit mask definitions + * @{ + */ + +#define ADC_AWD_CH_VINM0 (LL_ADC_AWD_CH_VINM0) /*!< ADC watchdog channel selection: VINM0 to ADC negative input */ +#define ADC_AWD_CH_VINM1 (LL_ADC_AWD_CH_VINM1) /*!< ADC watchdog channel selection: VINM1 to ADC negative input */ +#define ADC_AWD_CH_VINM2 (LL_ADC_AWD_CH_VINM2) /*!< ADC watchdog channel selection: VINM2 to ADC negative input */ +#define ADC_AWD_CH_VINM3 (LL_ADC_AWD_CH_VINM3) /*!< ADC watchdog channel selection: VINM3 to ADC negative input */ +#define ADC_AWD_CH_VINP0 (LL_ADC_AWD_CH_VINP0) /*!< ADC watchdog channel selection: VINP0 to ADC positive input */ +#define ADC_AWD_CH_VINP1 (LL_ADC_AWD_CH_VINP1) /*!< ADC watchdog channel selection: VINP1 to ADC positive input */ +#define ADC_AWD_CH_VINP2 (LL_ADC_AWD_CH_VINP2) /*!< ADC watchdog channel selection: VINP2 to ADC positive input */ +#define ADC_AWD_CH_VINP3 (LL_ADC_AWD_CH_VINP3) /*!< ADC watchdog channel selection: VINP3 to ADC positive input */ +#define ADC_AWD_CH_MICROM (LL_ADC_AWD_CH_MICROM) /*!< ADC watchdog channel selection: MICROM to ADC negative input */ +#define ADC_AWD_CH_MICROP (LL_ADC_AWD_CH_MICROP) /*!< ADC watchdog channel selection: MICROP to ADC positive input */ +#define ADC_AWD_CH_VBAT (LL_ADC_AWD_CH_VBAT) /*!< ADC watchdog channel selection: VBAT to ADC negative input */ +#define ADC_AWD_CH_TEMPSENSOR (LL_ADC_AWD_CH_TEMPSENSOR) /*!< ADC watchdog channel selection: TEMPSENSOR to ADC positive input */ +#define ADC_AWD_CH_GND_NEG (LL_ADC_AWD_CH_GND_NEG) /*!< ADC watchdog channel selection: GND to ADC negative input */ +#define ADC_AWD_CH_GND_POS (LL_ADC_AWD_CH_GND_POS) /*!< ADC watchdog channel selection: GND to ADC positive input */ +#define ADC_AWD_CH_VDDA_NEG (LL_ADC_AWD_CH_VDDA_NEG) /*!< ADC watchdog channel selection: VDDA to ADC negative input */ +#define ADC_AWD_CH_VDDA_POS (LL_ADC_AWD_CH_VDDA_POS) /*!< ADC watchdog channel selection: VDDA to ADC positive input */ + +/** + * @} + */ + +/** @defgroup ADC_AWD_EVENTTYPE ADC watchdog event type definitions + * @{ + */ + +#define ADC_AWD_EVENT_POLLING (0x00U) /*!< ADC watchdog event type polling */ +#define ADC_AWD_EVENT_INTERRUPT (0x01U) /*!< ADC watchdog event type interrupt */ + +/** + * @} + */ + + +/** @defgroup ADC_HAL_IRQ_STATUS_MASK ADC IRQ_STATUS register mask definitions + * @{ + */ +#define ADC_IRQ_FLAG_OVRDS (LL_ADC_IRQ_FLAG_OVRDS) /*!< ADC IRQ flag OVRDS Down Sampler overrun */ +#define ADC_IRQ_FLAG_AWD1 (LL_ADC_IRQ_FLAG_AWD1) /*!< ADC IRQ flag AWD1 Analog watchdog event */ +#define ADC_IRQ_FLAG_EOS (LL_ADC_IRQ_FLAG_EOS) /*!< ADC IRQ flag EOS End of conversion Sequence */ +#define ADC_IRQ_FLAG_EOC (LL_ADC_IRQ_FLAG_EOC) /*!< ADC IRQ flag EOC End of conversion */ +#define ADC_IRQ_FLAG_EODS (LL_ADC_IRQ_FLAG_EODS) /*!< ADC IRQ flag EODS End of Down Sampler conversion */ + +/** + * @} + */ + + +/** @defgroup ADC_HAL_IRQ_STATUS_MASK ADC IRQ_STATUS register mask definitions + * @{ + */ +#define ADC_IRQ_FLAGS_MASK (ADC_IRQ_FLAG_OVRDS | \ + ADC_IRQ_FLAG_AWD1 | \ + ADC_IRQ_FLAG_EOS | \ + ADC_IRQ_FLAG_EOC | \ + ADC_IRQ_FLAG_EODS) + +/** + * @} + */ + + +/** @defgroup ADC_HAL_IRQ_ENABLE ADC interrupts enable definitions + * @{ + */ +#define ADC_IRQ_EN_OVRDS (LL_ADC_IRQ_EN_OVRDS) /*!< ADC IRQ enable OVRDS */ +#define ADC_IRQ_EN_AWD1 (LL_ADC_IRQ_EN_AWD1) /*!< ADC IRQ enable AWD1 */ +#define ADC_IRQ_EN_EOS (LL_ADC_IRQ_EN_EOS) /*!< ADC IRQ enable EOS */ +#define ADC_IRQ_EN_EOC (LL_ADC_IRQ_EN_EOC) /*!< ADC IRQ enable EOC */ +#define ADC_IRQ_EN_EODS (LL_ADC_IRQ_EN_EODS) /*!< ADC IRQ enable EODS */ + +/** + * @} + */ + + +/** @defgroup ADC_HAL_IRQ_ENABLE_MASK ADC IRQ_ENABLE register mask definitions + * @{ + */ +/** + * @} + */ + + +/** + * @} + */ + + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup ADC_Private_Macros ADC Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Clear ADC error code (set it to no error code "HAL_ADC_ERROR_NONE"). + * @param __HANDLE__ ADC handle + * @retval None + */ +#define ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE) + +/** + * @brief Simultaneously clear and set specific bits of the handle State. + * @note ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(), + * the first parameter is the ADC handle State, the second parameter is the + * bit field to clear, the third and last parameter is the bit field to set. + * @retval None + */ +#define ADC_STATE_CLR_SET MODIFY_REG + +/** + * @brief Verify the length of the scheduled conversions group. + * @param __LENGTH__ number of programmed conversions. + * @retval SET (__LENGTH__ is within the maximum number of possible programmable conversions) + * or RESET (__LENGTH__ is null or too large) + */ +#define IS_ADC_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1UL)) && ((__LENGTH__) <= (16UL))) + +/** + * @brief Verify the ADC data width setting. + * @param __DATA_WIDTH__ programmed ADC resolution. + * @retval SET (__DATA_WIDTH__ is a valid value) or RESET (__DATA_WIDTH__ is invalid) + */ +#define IS_ADC_DATAWIDTH(__DATA_WIDTH__) (((__DATA_WIDTH__) == ADC_DS_DATA_WIDTH_12_BIT) || \ + ((__DATA_WIDTH__) == ADC_DS_DATA_WIDTH_13_BIT) || \ + ((__DATA_WIDTH__) == ADC_DS_DATA_WIDTH_14_BIT) || \ + ((__DATA_WIDTH__) == ADC_DS_DATA_WIDTH_15_BIT) || \ + ((__DATA_WIDTH__) == ADC_DS_DATA_WIDTH_16_BIT) ) +/** + * @brief Verify the ADC downsampler ratio setting. + * @param __DATA_RATIO__ programmed ADC downsampler ratio. + * @retval SET (__DATA_RATIO__ is a valid value) or RESET (__DATA_RATIO__ is invalid) + */ +#define IS_ADC_DATARATIO(__DATA_RATIO__) (((__DATA_RATIO__) == ADC_DS_RATIO_1) || \ + ((__DATA_RATIO__) == ADC_DS_RATIO_2) || \ + ((__DATA_RATIO__) == ADC_DS_RATIO_4) || \ + ((__DATA_RATIO__) == ADC_DS_RATIO_8) || \ + ((__DATA_RATIO__) == ADC_DS_RATIO_16) || \ + ((__DATA_RATIO__) == ADC_DS_RATIO_32) || \ + ((__DATA_RATIO__) == ADC_DS_RATIO_64) || \ + ((__DATA_RATIO__) == ADC_DS_RATIO_128) ) + +/** + * @brief Verify the ADC conversion type setting. + * @param __CONVERSION_TYPE__ ADC conversion type. + * @retval SET (__CONVERSION_TYPE__ is a valid value) or RESET (__CONVERSION_TYPE__ is invalid) + */ +#define IS_ADC_CONVERSIONTYPE(__CONVERSION_TYPE__) (((__CONVERSION_TYPE__) == ADC_CONVERSION_WITH_DS) || \ + ((__CONVERSION_TYPE__) == ADC_CONVERSION_WITH_DF) ) + +/** + * @brief Verify the ADC conversions overrun handling. + * @param __OVR__ ADC conversions overrun handling. + * @retval SET (__OVR__ is a valid value) or RESET (__OVR__ is invalid) + */ +#define IS_ADC_OVERRUN(__OVR__) (((__OVR__) == ADC_NEW_DATA_IS_LOST) || \ + ((__OVR__) == ADC_NEW_DATA_IS_KEPT) ) + +/** + * @brief Verify the ADC sampling mode setting. + * @param __SAMPLING_MODE__ programmed ADC sampling mode. + * @retval SET (__SAMPLING_MODE__ is a valid value) or RESET (__SAMPLING_MODE__ is invalid) + */ +#define IS_ADC_SAMPLINGMODE(__SAMPLING_MODE__) (((__SAMPLING_MODE__) == ADC_SAMPLING_AT_START) || \ + ((__SAMPLING_MODE__) == ADC_SAMPLING_AT_END) ) + +/** + * @brief Verify the ADC calibration calibration point setting. + * @param __POINT_NUMBER__ selected ADC calibration point number + * @retval SET (__POINT_NUMBER__ is a valid value) or RESET (__POINT_NUMBER__ is invalid) + */ +#define IS_ADC_CALIBRATION_POINT(__POINT_NUMBER__) (((__POINT_NUMBER__) == ADC_CALIB_POINT_1) || \ + ((__POINT_NUMBER__) == ADC_CALIB_POINT_2) || \ + ((__POINT_NUMBER__) == ADC_CALIB_POINT_3) || \ + ((__POINT_NUMBER__) == ADC_CALIB_POINT_4) || \ + ((__POINT_NUMBER__) == ADC_CALIB_NONE) ) + +/** + * @brief Verify the ADC calibration calibration gain setting. + * @param __GAIN__ selected ADC calibration gain + * @retval SET (__GAIN__ is a valid value) or RESET (__GAIN__ is invalid) + */ +#define IS_ADC_CALIBRATION_GAIN(__GAIN__) ((__GAIN__ <= 0xFFFUL)) + +/** + * @brief Verify the ADC calibration calibration offset setting. + * @param __OFFSET__ selected ADC calibration offset + * @retval SET (__OFFSET__ is a valid value) or RESET (__OFFSET__ is invalid) + */ +#define IS_ADC_CALIBRATION_OFFSET(__OFFSET__) ((__OFFSET__ <= 0xFFUL)) + +/** + * @brief Verify the ADC conversions sampling time. + * @param __SAMPLERATE__ ADC conversions sampling time. + * @retval SET (__SAMPLING_TIME__ is a valid value) or RESET (__SAMPLING_TIME__ is invalid) + */ +#define IS_ADC_SAMPLERATE(__SAMPLERATE__) (((__SAMPLERATE__) == ADC_SAMPLE_RATE_16) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_20) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_24) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_28) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_32) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_36) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_40) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_44) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_48) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_52) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_56) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_60) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_64) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_68) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_72) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_76) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_80) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_84) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_88) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_92) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_96) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_100) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_104) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_108) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_112) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_116) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_120) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_124) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_128) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_132) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_136) || \ + ((__SAMPLERATE__) == ADC_SAMPLE_RATE_140) ) + +/** + * @brief Verify the ADC bit inversion mode + * @param __OUTBIT_MODE__ ADC invert bit to bit data output. + * @retval SET (__OUTBIT_MODE__ is valid) or RESET (__OUTBIT_MODE__ is invalid) + */ +#define IS_ADC_DATA_INVERT(__OUTBIT_MODE__) (((__OUTBIT_MODE__) == ADC_DATA_INVERT_NONE) || \ + ((__OUTBIT_MODE__) == ADC_DATA_INVERT_DIFF) || \ + ((__OUTBIT_MODE__) == ADC_DATA_INVERT_SING) || \ + ((__OUTBIT_MODE__) == ADC_DATA_INVERT_BOTH) ) + +/** + * @brief Verify the ADC sequencer rank setting. + * @param __RANK__ selected position in sequencer. + * @retval SET (__RANK__ is valid) or RESET (__RANK__ is invalid) + */ +#define IS_ADC_RANK(__RANK__) (((__RANK__) == ADC_RANK_1 ) || \ + ((__RANK__) == ADC_RANK_2 ) || \ + ((__RANK__) == ADC_RANK_3 ) || \ + ((__RANK__) == ADC_RANK_4 ) || \ + ((__RANK__) == ADC_RANK_5 ) || \ + ((__RANK__) == ADC_RANK_6 ) || \ + ((__RANK__) == ADC_RANK_7 ) || \ + ((__RANK__) == ADC_RANK_8 ) || \ + ((__RANK__) == ADC_RANK_9 ) || \ + ((__RANK__) == ADC_RANK_10) || \ + ((__RANK__) == ADC_RANK_11) || \ + ((__RANK__) == ADC_RANK_12) || \ + ((__RANK__) == ADC_RANK_13) || \ + ((__RANK__) == ADC_RANK_14) || \ + ((__RANK__) == ADC_RANK_15) || \ + ((__RANK__) == ADC_RANK_16) ) + +/** + * @brief Verify the ADC channel voltage range setting. + * @param __VOLTAGE_RANGE__ selected voltage range. + * @retval SET (__VOLTAGE_RANGE_ is valid) or RESET (__VOLTAGE_RANGE_ is invalid) + */ +#define IS_ADC_VOLTAGE_RANGE(__VOLTAGE_RANGE__) (((__VOLTAGE_RANGE__) == ADC_VIN_RANGE_1V2) || \ + ((__VOLTAGE_RANGE__) == ADC_VIN_RANGE_2V4) || \ + ((__VOLTAGE_RANGE__) == ADC_VIN_RANGE_3V6) ) + +/** + * @brief Verify the ADC channel setting. + * @param __CHANNEL__ selected ADC channel. + * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) + */ +#define IS_ADC_CHANNEL(__CHANNEL__) (((__CHANNEL__) == ADC_CHANNEL_VINM0) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINM1) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINM2) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINM3) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINP0) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINP1) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINP2) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINP3) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINP0_VINM0) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINP1_VINM1) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINP2_VINM2) || \ + ((__CHANNEL__) == ADC_CHANNEL_VINP3_VINM3) || \ + ((__CHANNEL__) == ADC_CHANNEL_VBAT) || \ + ((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) ) + +/** + * @brief Verify the ADC event setting. + * @param __EVENT__ ADC event. + * @retval SET (__EVENT__ is valid) or RESET (__EVENT__ is invalid) + */ +#define IS_ADC_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_IRQ_FLAG_OVRDS) || \ + ((__EVENT__) == ADC_IRQ_FLAG_AWD1) || \ + ((__EVENT__) == ADC_IRQ_FLAG_EOS) || \ + ((__EVENT__) == ADC_IRQ_FLAG_EODS) ) + +/** + * @brief Verify the ADC watchdog channel setting. + * @param __CHANNEL__ ADC channel selection monitored by watchdog. + * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) + */ +#define IS_ADC_AWD_CHANNEL(__CHANNEL__) \ + (((__CHANNEL__) != 0UL) \ + && (((__CHANNEL__) & ~(ADC_AWD_CH_VINM0 | ADC_AWD_CH_VINM1 | ADC_AWD_CH_VINM2 | ADC_AWD_CH_VINM3 | \ + ADC_AWD_CH_VINP0 | ADC_AWD_CH_VINP1 | ADC_AWD_CH_VINP2 | ADC_AWD_CH_VINP3 | \ + ADC_AWD_CH_MICROM | ADC_AWD_CH_MICROP | ADC_AWD_CH_VBAT | ADC_AWD_CH_TEMPSENSOR | \ + ADC_AWD_CH_GND_NEG | ADC_AWD_CH_GND_POS | ADC_AWD_CH_VDDA_NEG | ADC_AWD_CH_VDDA_POS )) \ + == 0UL)) + +/** + * @brief Verify the ADC watchdog event setting. + * @param __EVENT__ ADC watchdog event. + * @retval SET (__EVENT__ is valid) or RESET (__EVENT__ is invalid) + */ +#define IS_ADC_AWD_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_AWD_EVENT_POLLING) || \ + ((__EVENT__) == ADC_AWD_EVENT_INTERRUPT) ) + + +/** + * @brief Verify the LDO stabilization delay. + * @param __DELAY__ LDO stabilization delay (microseconds). + * @retval SET (__DELAY__ is valid) or RESET (__DELAY__ is invalid) + */ +#define IS_ADC_LDO_DELAY(__DELAY__) ((__DELAY__) <= 1020UL) + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/** @defgroup ADC_Private_Constants ADC Private Constants + * @{ + */ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Macros ADC Exported Macros + * @{ + */ + +/** @defgroup ADC_HAL_EM_HANDLE_IT_FLAG HAL ADC macro to manage HAL ADC handle, + * IT and flags. + * @{ + */ + +/** @brief Reset ADC handle state. + * @param __HANDLE__ ADC handle + * @retval None + */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + do \ + { \ + (__HANDLE__)->State = HAL_ADC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) \ + ((__HANDLE__)->State = HAL_ADC_STATE_RESET) +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + +/** + * @brief Enable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be a combination of the following values: + * @arg @ref ADC_IRQ_EN_OVRFL ADC Decimation Filter saturated interrupt source + * @arg @ref ADC_IRQ_EN_OVRDF ADC Decimation Filter overrung interrupt source + * @arg @ref ADC_IRQ_EN_OVRDS ADC Down Sampler overrun interrupt source + * @arg @ref ADC_IRQ_EN_AWD1 ADC Watchdog alert interrupt source + * @arg @ref ADC_IRQ_EN_EOC ADC End of conversion interrupt source + * @arg @ref ADC_IRQ_EN_EOS ADC End of conversion of a sequence interrupt source + * @arg @ref ADC_IRQ_EN_EODF ADC End of conversion from Decimation Filter interrupt source + * @arg @ref ADC_IRQ_EN_EODS ADC End of conversion from Down Sampler interrupt source + * @retval None + */ +#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) LL_ADC_EnableIT((__HANDLE__)->Instance, __INTERRUPT__) + + +/** + * @brief Disable ADC interrupt. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC Interrupt + * This parameter can be a combination of the following values: + * @arg @ref ADC_IRQ_EN_OVRFL ADC Decimation Filter saturated interrupt source + * @arg @ref ADC_IRQ_EN_OVRDF ADC Decimation Filter overrung interrupt source + * @arg @ref ADC_IRQ_EN_OVRDS ADC Down Sampler overrun interrupt source + * @arg @ref ADC_IRQ_EN_AWD1 ADC Watchdog alert interrupt source + * @arg @ref ADC_IRQ_EN_EOC ADC End of conversion interrupt source + * @arg @ref ADC_IRQ_EN_EOS ADC End of conversion of a sequence interrupt source + * @arg @ref ADC_IRQ_EN_EODF ADC End of conversion from Decimation Filter interrupt source + * @arg @ref ADC_IRQ_EN_EODS ADC End of conversion from Down Sampler interrupt source + * @retval None + */ +#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) LL_ADC_DisableIT((__HANDLE__)->Instance, __INTERRUPT__) + + +/** @brief Checks if the specified ADC interrupt source is enabled or disabled. + * @param __HANDLE__ ADC handle + * @param __INTERRUPT__ ADC interrupt source to check + * This parameter can be one of the following values: + * @arg @ref ADC_IRQ_EN_OVRFL ADC Decimation Filter saturated interrupt source + * @arg @ref ADC_IRQ_EN_OVRDF ADC Decimation Filter overrung interrupt source + * @arg @ref ADC_IRQ_EN_OVRDS ADC Down Sampler overrun interrupt source + * @arg @ref ADC_IRQ_EN_AWD1 ADC Watchdog alert interrupt source + * @arg @ref ADC_IRQ_EN_EOC ADC End of conversion interrupt source + * @arg @ref ADC_IRQ_EN_EOS ADC End of conversion of a sequence interrupt source + * @arg @ref ADC_IRQ_EN_EODF ADC End of conversion from Decimation Filter interrupt source + * @arg @ref ADC_IRQ_EN_EODS ADC End of conversion from Down Sampler interrupt source + * @retval State of interruption (SET or RESET) + */ +#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) LL_ADC_IsEnabledIT((__HANDLE__)->Instance, __INTERRUPT__) + + +/** + * @brief Check whether the specified ADC flag is set or not. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be one of the following values: + * @arg @ref ADC_IRQ_FLAG_OVRFL ADC Decimation Filter saturated interrupt source + * @arg @ref ADC_IRQ_FLAG_OVRDF ADC Decimation Filter overrung interrupt source + * @arg @ref ADC_IRQ_FLAG_OVRDS ADC Down Sampler overrun interrupt source + * @arg @ref ADC_IRQ_FLAG_AWD1 ADC Watchdog alert interrupt source + * @arg @ref ADC_IRQ_FLAG_EOC ADC End of conversion interrupt source + * @arg @ref ADC_IRQ_FLAG_EOS ADC End of conversion of a sequence interrupt source + * @arg @ref ADC_IRQ_FLAG_EODF ADC End of conversion from Decimation Filter interrupt source + * @arg @ref ADC_IRQ_FLAG_EODS ADC End of conversion from Down Sampler interrupt source + * @retval State of flag (TRUE or FALSE). + */ +#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) LL_ADC_IsActiveFlag((__HANDLE__)->Instance, __FLAG__) + + +/** + * @brief Clear the specified ADC flag. + * @param __HANDLE__ ADC handle + * @param __FLAG__ ADC flag + * This parameter can be a combination of the following values: + * @arg @ref ADC_IRQ_FLAG_OVRFL ADC Decimation Filter saturated interrupt source + * @arg @ref ADC_IRQ_FLAG_OVRDF ADC Decimation Filter overrung interrupt source + * @arg @ref ADC_IRQ_FLAG_OVRDS ADC Down Sampler overrun interrupt source + * @arg @ref ADC_IRQ_FLAG_AWD1 ADC Watchdog alert interrupt source + * @arg @ref ADC_IRQ_FLAG_EOC ADC End of conversion interrupt source + * @arg @ref ADC_IRQ_FLAG_EOS ADC End of conversion of a sequence interrupt source + * @arg @ref ADC_IRQ_FLAG_EODF ADC End of conversion from Decimation Filter interrupt source + * @arg @ref ADC_IRQ_FLAG_EODS ADC End of conversion from Down Sampler interrupt source + * @retval None + */ +/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */ +#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) LL_ADC_ClearActiveFlags((__HANDLE__)->Instance, __FLAG__) + + +/** + * @} + */ + +/** @defgroup ADC_HAL_EM_HELPER_MACRO HAL ADC helper macro + * @{ + */ + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref ADC_CHANNEL_VINM0 + * @arg @ref ADC_CHANNEL_VINM1 + * @arg @ref ADC_CHANNEL_VINM2 + * @arg @ref ADC_CHANNEL_VINM3 + * @arg @ref ADC_CHANNEL_VINP0 + * @arg @ref ADC_CHANNEL_VINP1 + * @arg @ref ADC_CHANNEL_VINP2 + * @arg @ref ADC_CHANNEL_VINP3 + * @arg @ref ADC_CHANNEL_VINP0_VINM0 + * @arg @ref ADC_CHANNEL_VINP1_VINM1 + * @arg @ref ADC_CHANNEL_VINP2_VINM2 + * @arg @ref ADC_CHANNEL_VINP3_VINM3 + * @arg @ref ADC_CHANNEL_VBAT + * @arg @ref ADC_CHANNEL_TEMPSENSOR + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel + * (channel connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __HAL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \ + __LL_ADC_IS_CHANNEL_INTERNAL((__CHANNEL__)) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_WIDTH_CURRENT__ Resolution of the data to be converted + * This parameter can be one of the following values: + * @arg @ref ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref ADC_DS_DATA_WIDTH_16_BIT + * @param __ADC_WIDTH_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref ADC_DS_DATA_WIDTH_16_BIT + * @retval ADC conversion data to the requested resolution + */ +#define __HAL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_WIDTH_CURRENT__,\ + __ADC_WIDTH_TARGET__)\ +__LL_ADC_CONVERT_DATA_RESOLUTION((__DATA__), \ + (__ADC_WIDTH_CURRENT__), \ + (__ADC_WIDTH_TARGET__)) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @param __INPUT_VOLTAGE_RANGE__ Analog reference voltage (unit: mV) + * @arg @ref ADC_VIN_RANGE_3V6 + * @arg @ref ADC_VIN_RANGE_2V4 + * @arg @ref ADC_VIN_RANGE_1V2 + * @param __ADC_DATA__ ADC conversion data (unit: digital value). + * @param __ADC_WIDTH__ This parameter can be one of the following values: + * @arg @ref ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref ADC_DS_DATA_WIDTH_16_BIT + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __HAL_ADC_CALC_DATA_TO_VOLTAGE(__INPUT_VOLTAGE_RANGE__,\ + __ADC_DATA__,\ + __ADC_WIDTH__)\ +__LL_ADC_CALC_DATA_TO_VOLTAGE((__INPUT_VOLTAGE_RANGE__), \ + (__ADC_DATA__), \ + (__ADC_WIDTH__)) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value) + * in differential ended mode. + * @param __INPUT_VOLTAGE_RANGE__ Analog reference voltage (unit: mV) + * @arg @ref ADC_VIN_RANGE_3V6 + * @arg @ref ADC_VIN_RANGE_2V4 + * @arg @ref ADC_VIN_RANGE_1V2 + * @param __ADC_DATA__ ADC conversion data (unit: digital value). + * @param __ADC_WIDTH__ This parameter can be one of the following values: + * @arg @ref ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref ADC_DS_DATA_WIDTH_16_BIT + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __HAL_ADC_CALC_DIFF_DATA_TO_VOLTAGE(__INPUT_VOLTAGE_RANGE__,\ + __ADC_DATA__,\ + __ADC_WIDTH__)\ +__LL_ADC_CALC_DIFF_DATA_TO_VOLTAGE((__INPUT_VOLTAGE_RANGE__), \ + (__ADC_DATA__), \ + (__ADC_WIDTH__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_WIDTH__ This parameter can be one of the following values: + * @arg @ref ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref ADC_DS_DATA_WIDTH_16_BIT + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE(__TEMPSENSOR_ADC_DATA__,\ + __ADC_WIDTH__)\ +__LL_ADC_CALC_TEMPERATURE((__TEMPSENSOR_ADC_DATA__), \ + (__ADC_WIDTH__)) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_WIDTH__ This parameter can be one of the following values: + * @arg @ref ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref ADC_DS_DATA_WIDTH_16_BIT + * @retval Temperature (unit: degree Celsius) + */ +#define __HAL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_ADC_DATA__,\ + __ADC_WIDTH__)\ +__LL_ADC_CALC_TEMPERATURE_TYP_PARAMS((__TEMPSENSOR_ADC_DATA__), \ + (__ADC_WIDTH__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc); +void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc); + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group2 + * @brief IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout); +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc); + +/* Non-blocking mode: DMA */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, const uint32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc); + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADC_GetValue(const ADC_HandleTypeDef *hadc); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc); +void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** @addtogroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, const ADC_ChannelConfTypeDef *ConfigChannel); +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, const ADC_AnalogWDGConfTypeDef *ConfigWatchdog); + +/** + * @} + */ + +/** + * @addtogroup ADC_Exported_Functions_Group6 Analog Timing Control functions + * @{ + */ +HAL_StatusTypeDef HAL_ADC_SMPSSyncEnable(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef HAL_ADC_SMPSSyncDisable(ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/* Peripheral State functions *************************************************/ +/** @addtogroup ADC_Exported_Functions_Group7 + * @{ + */ + +uint32_t HAL_ADC_GetState(const ADC_HandleTypeDef *hadc); +uint32_t HAL_ADC_GetError(const ADC_HandleTypeDef *hadc); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup ADC_Private_Functions ADC Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32WL3x_HAL_ADC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_comp.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_comp.h new file mode 100644 index 0000000000..cbac585c7d --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_comp.h @@ -0,0 +1,523 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_comp.h + * @author MCD Application Team + * @brief Header file of COMP HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_COMP_H +#define STM32WL3x_HAL_COMP_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" +#include "stm32wl3x_ll_system.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ +#if defined (COMP1) + +/** @addtogroup COMP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup COMP_Exported_Types COMP Exported Types + * @{ + */ + +/** + * @brief COMP Init structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Set comparator operating mode to adjust power and speed. + Note: For the characteristics of comparator power modes + (propagation delay and power consumption), refer to device datasheet. + This parameter can be a value of @ref COMP_PowerMode */ + + uint32_t InputPlus; /*!< Set comparator input plus (non-inverting input). + This parameter can be a value of @ref COMP_InputPlus */ + + uint32_t InputMinus; /*!< Set comparator input minus (inverting input). + This parameter can be a value of @ref COMP_InputMinus */ + + uint32_t Hysteresis; /*!< Set comparator hysteresis mode of the input minus. + This parameter can be a value of @ref COMP_Hysteresis */ + + uint32_t OutputPol; /*!< Set comparator output polarity. + This parameter can be a value of @ref COMP_OutputPolarity */ + + uint32_t BlankingSrce; /*!< Set comparator blanking source. + This parameter can be a value of @ref COMP_BlankingSrce */ + + uint32_t TriggerMode; /*!< Set the comparator output triggering External Interrupt Line (EXTI). + This parameter can be a value of @ref COMP_EXTI_TriggerMode */ + +} COMP_InitTypeDef; + +/** + * @brief HAL COMP state machine: HAL COMP states definition + */ +#define COMP_STATE_BITFIELD_LOCK (0x10U) +typedef enum +{ + HAL_COMP_STATE_RESET = 0x00U, /*!< COMP not yet initialized */ + HAL_COMP_STATE_RESET_LOCKED = (HAL_COMP_STATE_RESET | COMP_STATE_BITFIELD_LOCK), /*!< COMP not yet initialized and configuration is locked */ + HAL_COMP_STATE_READY = 0x01U, /*!< COMP initialized and ready for use */ + HAL_COMP_STATE_READY_LOCKED = (HAL_COMP_STATE_READY | COMP_STATE_BITFIELD_LOCK), /*!< COMP initialized but configuration is locked */ + HAL_COMP_STATE_BUSY = 0x02U, /*!< COMP is running */ + HAL_COMP_STATE_BUSY_LOCKED = (HAL_COMP_STATE_BUSY | COMP_STATE_BITFIELD_LOCK) /*!< COMP is running and configuration is locked */ +} HAL_COMP_StateTypeDef; + +/** + * @brief COMP Handle Structure definition + */ +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) +typedef struct __COMP_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ +{ + COMP_TypeDef *Instance; /*!< Register base address */ + COMP_InitTypeDef Init; /*!< COMP required parameters */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */ + __IO uint32_t ErrorCode; /*!< COMP error code */ +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) + void (* TriggerCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP trigger callback */ + void (* MspInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp Init callback */ + void (* MspDeInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp DeInit callback */ +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ +} COMP_HandleTypeDef; + +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) +/** + * @brief HAL COMP Callback ID enumeration definition + */ +typedef enum +{ + HAL_COMP_TRIGGER_CB_ID = 0x00U, /*!< COMP trigger callback ID */ + HAL_COMP_MSPINIT_CB_ID = 0x01U, /*!< COMP Msp Init callback ID */ + HAL_COMP_MSPDEINIT_CB_ID = 0x02U /*!< COMP Msp DeInit callback ID */ +} HAL_COMP_CallbackIDTypeDef; + +/** + * @brief HAL COMP Callback pointer definition + */ +typedef void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer to a COMP callback function */ + +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup COMP_Exported_Constants COMP Exported Constants + * @{ + */ + +/** @defgroup COMP_Error_Code COMP Error Code + * @{ + */ +#define HAL_COMP_ERROR_NONE (0x00UL) /*!< No error */ +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) +#define HAL_COMP_ERROR_INVALID_CALLBACK (0x01UL) /*!< Invalid Callback error */ +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup COMP_PowerMode COMP power mode + * @{ + */ +/* Note: For the characteristics of comparator power modes */ +/* (propagation delay and power consumption), */ +/* refer to device datasheet. */ +#define COMP_POWERMODE_HIGHSPEED (0x00000000UL) /*!< High Speed */ +#define COMP_POWERMODE_MEDIUMSPEED (COMP_CSR_PWRMODE_0) /*!< Medium Speed */ +#define COMP_POWERMODE_ULTRALOWPOWER (COMP_CSR_PWRMODE) /*!< Ultra-low power mode */ +/** + * @} + */ + +/** @defgroup COMP_InputPlus COMP input plus (non-inverting input) + * @{ + */ +#if defined(COMP_CSR_INPSEL) +#define COMP_INPUT_PLUS_IO1 (0x00000000UL) /*!< Comparator input plus connected to IO1 (pin PA14 for COMP1). */ +#define COMP_INPUT_PLUS_IO2 (COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO2 (pin PB1 for COMP1) */ +#define COMP_INPUT_PLUS_IO3 (COMP_CSR_INPSEL_1) /*!< Comparator input plus connected to IO3 (pin PB2 for COMP1) */ +#endif /* COMP_CSR_INPSEL */ +/** + * @} + */ + +/** @defgroup COMP_InputMinus COMP input minus (inverting input) + * @{ + */ +#define COMP_INPUT_MINUS_1_4VREFINT ( COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 1/4 VrefInt */ +#define COMP_INPUT_MINUS_1_2VREFINT ( COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 1/2 VrefInt */ +#define COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 3/4 VrefInt */ +#define COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN ) /*!< Comparator input minus connected to VrefInt */ +#define COMP_INPUT_MINUS_DAC1_CH1 (COMP_CSR_INMSEL_2 ) /*!< Comparator input minus connected to DAC channel 1 (DAC_OUT) */ +#define COMP_INPUT_MINUS_IO1 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO1 (pin PA13 for COMP1) */ +#define COMP_INPUT_MINUS_IO2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to IO2 (pin PB0 for COMP1) */ +#define COMP_INPUT_MINUS_IO3 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO3 (pin PB3 for COMP1) */ +/** + * @} + */ + +/** @defgroup COMP_Hysteresis COMP hysteresis + * @{ + */ +#define COMP_HYSTERESIS_NONE (0x00000000UL) /*!< No hysteresis */ +#define COMP_HYSTERESIS_LOW ( COMP_CSR_HYST_0) /*!< Hysteresis level low */ +#define COMP_HYSTERESIS_MEDIUM (COMP_CSR_HYST_1 ) /*!< Hysteresis level medium */ +#define COMP_HYSTERESIS_HIGH (COMP_CSR_HYST_1 | COMP_CSR_HYST_0) /*!< Hysteresis level high */ +/** + * @} + */ + +/** @defgroup COMP_OutputPolarity COMP output Polarity + * @{ + */ +#define COMP_OUTPUTPOL_NONINVERTED (0x00000000UL) /*!< COMP output level is not inverted (comparator output is high when the input plus is at a higher voltage than the input minus) */ +#define COMP_OUTPUTPOL_INVERTED (COMP_CSR_POLARITY) /*!< COMP output level is inverted (comparator output is low when the input plus is at a higher voltage than the input minus) */ +/** + * @} + */ + +/** @defgroup COMP_BlankingSrce COMP blanking source + * @{ + */ +#define COMP_BLANKINGSRC_NONE (0x00000000UL) /*!State = HAL_COMP_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + +/** + * @brief Clear COMP error code (set it to no error code "HAL_COMP_ERROR_NONE"). + * @param __HANDLE__ COMP handle + * @retval None + */ +#define COMP_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_COMP_ERROR_NONE) + +/** + * @brief Enable the specified comparator. + * @param __HANDLE__ COMP handle + * @retval None + */ +#define __HAL_COMP_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN) + +/** + * @brief Disable the specified comparator. + * @param __HANDLE__ COMP handle + * @retval None + */ +#define __HAL_COMP_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_EN) + +/** + * @brief Lock the specified comparator configuration. + * @note Using this macro induce HAL COMP handle state machine being no + * more in line with COMP instance state. + * To keep HAL COMP handle state machine updated, it is recommended + * to use function "HAL_COMP_Lock')". + * @param __HANDLE__ COMP handle + * @retval None + */ +#define __HAL_COMP_LOCK(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK) + +/** + * @brief Check whether the specified comparator is locked. + * @param __HANDLE__ COMP handle + * @retval Value 0 if COMP instance is not locked, value 1 if COMP instance is locked + */ +#define __HAL_COMP_IS_LOCKED(__HANDLE__) (READ_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_LOCK) == COMP_CSR_LOCK) + +/** + * @} + */ + +/** @defgroup COMP_Exti_Management COMP external interrupt line management + * @{ + */ +/** + * @brief Enable the COMP1 EXTI line rising edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() \ + LL_SYSCFG_MR_SUBG_INTAI_SetTrigger( LL_SYSCFG_MR_SUBG_TRIGGER_RISING_EDGE, LL_SYSCFG_MR_SUBG_COMPOUT_EVENT) + +/** + * @brief Enable the COMP1 EXTI line falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() \ + LL_SYSCFG_MR_SUBG_INTAI_SetTrigger(LL_SYSCFG_MR_SUBG_TRIGGER_FALLING_EDGE, LL_SYSCFG_MR_SUBG_COMPOUT_EVENT) + +/** + * @brief Enable the COMP1 EXTI line rising & falling edge trigger. + * @retval None + */ +#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() \ + LL_SYSCFG_MR_SUBG_INTAI_SetTrigger(LL_SYSCFG_MR_SUBG_TRIGGER_BOTH_EDGE, LL_SYSCFG_MR_SUBG_COMPOUT_EVENT) + + +/** + * @} + */ + +/** + * @} + */ + + +/* Private types -------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup COMP_Private_Constants COMP Private Constants + * @{ + */ + + +/** @defgroup COMP_ExtiLine COMP EXTI Lines + * @{ + */ +#define COMP_EXTI_IT (0x00000001UL) /*!< EXTI line event with interruption */ +#define COMP_EXTI_EVENT (0x00000002UL) /*!< EXTI line event only (without interruption) */ +#define COMP_EXTI_RISING (0x00000010UL) /*!< EXTI line event on rising edge */ +#define COMP_EXTI_FALLING (0x00000020UL) /*!< EXTI line event on falling edge */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup COMP_Private_Macros COMP Private Macros + * @{ + */ + + +/** @defgroup COMP_IS_COMP_Private_Definitions COMP private macros to check input parameters + * @{ + */ +#define IS_COMP_POWERMODE(__POWERMODE__) (((__POWERMODE__) == COMP_POWERMODE_HIGHSPEED) || \ + ((__POWERMODE__) == COMP_POWERMODE_MEDIUMSPEED) || \ + ((__POWERMODE__) == COMP_POWERMODE_ULTRALOWPOWER) ) + +#if defined(COMP_INPUT_PLUS_IO1) +#define IS_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) (((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO1) || \ + ((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO2) || \ + ((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO3)) +#else +#define IS_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) (((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO2) || \ + ((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO3)) +#endif /* COMP_INPUT_PLUS_IO1 */ + +/* Note: On this series, comparator input minus parameters are */ +/* the same on all COMP instances. */ +/* However, comparator instance kept as macro parameter for */ +/* compatibility with other families. */ +#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT) ||\ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT) ||\ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT) ||\ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT) ||\ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1) ||\ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1) ||\ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2) ||\ + ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO3)) + + +#define IS_COMP_HYSTERESIS(__HYSTERESIS__) (((__HYSTERESIS__) == COMP_HYSTERESIS_NONE) || \ + ((__HYSTERESIS__) == COMP_HYSTERESIS_LOW) || \ + ((__HYSTERESIS__) == COMP_HYSTERESIS_MEDIUM) || \ + ((__HYSTERESIS__) == COMP_HYSTERESIS_HIGH)) + +#define IS_COMP_OUTPUTPOL(__POL__) (((__POL__) == COMP_OUTPUTPOL_NONINVERTED) || \ + ((__POL__) == COMP_OUTPUTPOL_INVERTED)) + +#define IS_COMP_BLANKINGSRCE(__OUTPUT_BLANKING_SOURCE__) \ + (((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_NONE) \ + || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM16_OC1) \ + || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM2_OC4) \ + ) + +/* Note: Output blanking source common to all COMP instances */ +/* Macro kept for compatibility with other series */ +#define IS_COMP_BLANKINGSRC_INSTANCE(__INSTANCE__, __OUTPUT_BLANKING_SOURCE__) \ + (IS_COMP_BLANKINGSRCE(__OUTPUT_BLANKING_SOURCE__)) + + +#define IS_COMP_TRIGGERMODE(__MODE__) (((__MODE__) == COMP_TRIGGERMODE_RISING) || \ + ((__MODE__) == COMP_TRIGGERMODE_FALLING) || \ + ((__MODE__) == COMP_TRIGGERMODE_RISING_FALLING) || \ + ((__MODE__) == COMP_TRIGGERMODE_LOW_LEVEL) || \ + ((__MODE__) == COMP_TRIGGERMODE_HIGH_LEVEL)) + +#define IS_COMP_OUTPUT_LEVEL(__OUTPUT_LEVEL__) (((__OUTPUT_LEVEL__) == COMP_OUTPUT_LEVEL_LOW) || \ + ((__OUTPUT_LEVEL__) == COMP_OUTPUT_LEVEL_HIGH)) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup COMP_Exported_Functions + * @{ + */ + +/** @addtogroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_DeInit(COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); +void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); + +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID, + pCOMP_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_COMP_UnRegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup COMP_Exported_Functions_Group2 Start-Stop operation functions + * @{ + */ +HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); +HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); +void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ +/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); +uint32_t HAL_COMP_GetOutputLevel(const COMP_HandleTypeDef *hcomp); +/* Callback in interrupt mode */ +void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/* Peripheral State functions **************************************************/ +/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +HAL_COMP_StateTypeDef HAL_COMP_GetState(const COMP_HandleTypeDef *hcomp); +uint32_t HAL_COMP_GetError(const COMP_HandleTypeDef *hcomp); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* COMP1 */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_COMP_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_conf_template.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_conf_template.h new file mode 100644 index 0000000000..4f31179eba --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_conf_template.h @@ -0,0 +1,304 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3X_HAL_CONF_H +#define STM32WL3X_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ + +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_COMP_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_LCD_MODULE_ENABLED +#define HAL_LCSC_MODULE_ENABLED +#define HAL_LPAWUR_MODULE_ENABLED +#define HAL_MRSUBG_MODULE_ENABLED +#define HAL_MRSUBG_TIMER_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SMBUS_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_DAC_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_IWDG_REGISTER_CALLBACKS 0u +#define USE_HAL_LCD_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ + +#if !defined (HSE_VALUE) +#define HSE_VALUE (48000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations +in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @brief 64 MHz PLL clock default value. + * This value is the default RC64M_PLL value after Reset. + */ +#if !defined (RC64MPLL_VALUE) +#define RC64MPLL_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* RC64MPLL_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/* ################ HSE Capacitor tuning configuration ###################### */ +/** + * @brief Default value of the HSE capacitor tuning. + */ +#if !defined(CFG_HW_RCC_HSE_CAPACITOR_TUNE) +#define CFG_HW_RCC_HSE_CAPACITOR_TUNE 32 +#endif + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32wl3x_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32wl3x_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED +#include "stm32wl3x_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32wl3x_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32wl3x_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32wl3x_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED +#include "stm32wl3x_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32wl3x_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32wl3x_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32wl3x_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32wl3x_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32wl3x_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32wl3x_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED +#include "stm32wl3x_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32wl3x_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32wl3x_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32wl3x_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32wl3x_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32wl3x_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32wl3x_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32wl3x_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32wl3x_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32wl3x_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32wl3x_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_MRSUBG_MODULE_ENABLED +#include "stm32wl3x_hal_mrsubg.h" +#endif /* HAL_MRSUBG_MODULE_ENABLED */ + +#ifdef HAL_MRSUBG_TIMER_MODULE_ENABLED +#include "stm32wl3x_hal_mrsubg_timer.h" +#endif /* HAL_MRSUBG_TIMER_MODULE_ENABLED */ + +#ifdef HAL_LPAWUR_MODULE_ENABLED +#include "stm32wl3x_hal_lpawur.h" +#endif /* HAL_LPAWUR_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3X_HAL_CONF_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_cortex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_cortex.h new file mode 100644 index 0000000000..319a5083c7 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_cortex.h @@ -0,0 +1,385 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_CORTEX_H +#define STM32WL3x_HAL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup CORTEX CORTEX + * @brief CORTEX HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Types CORTEX Exported Types + * @{ + */ + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition + * @brief MPU Region initialization structure + * @{ + */ +typedef struct +{ + uint8_t Enable; /*!< Specifies the status of the region. + This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ + uint8_t Number; /*!< Specifies the number of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Number */ + uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. + */ + uint8_t Size; /*!< Specifies the size of the region to protect. + This parameter can be a value of @ref CORTEX_MPU_Region_Size */ + uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + uint8_t TypeExtField; /*!< Specifies the TEX field level. + This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ + uint8_t AccessPermission; /*!< Specifies the region access permission type. + This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ + uint8_t DisableExec; /*!< Specifies the instruction access status. + This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ + uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ + uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. + This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ + uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. + This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ +} MPU_Region_InitTypeDef; +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_NVIC_Priority CORTEX IRQ NVIC Priority + * @{ + */ + +#define NVIC_CRITICAl_PRIORITY 0 /*!< Critical Priority */ + +#define NVIC_HIGH_PRIORITY 1 /*!< High Priority */ + +#define NVIC_MED_PRIORITY 2 /*!< Medium Priority */ + +#define NVIC_LOW_PRIORITY 3 /*!< Low Priority */ + +/** + * @} + */ + + +#if (__MPU_PRESENT == 1) +/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control CORTEX MPU HFNMI and PRIVILEGED Access control + * @{ + */ +#define MPU_HFNMI_PRIVDEF_NONE 0x00000000U +#define MPU_HARDFAULT_NMI (MPU_CTRL_HFNMIENA_Msk) +#define MPU_PRIVILEGED_DEFAULT (MPU_CTRL_PRIVDEFENA_Msk) +#define MPU_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable + * @{ + */ +#define MPU_REGION_ENABLE ((uint8_t)0x01) +#define MPU_REGION_DISABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access + * @{ + */ +#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) +#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable + * @{ + */ +#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable + * @{ + */ +#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable + * @{ + */ +#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) +#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_TEX_Levels CORTEX MPU TEX Levels + * @{ + */ +#define MPU_TEX_LEVEL0 ((uint8_t)0x00) +#define MPU_TEX_LEVEL1 ((uint8_t)0x01) +#define MPU_TEX_LEVEL2 ((uint8_t)0x02) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size + * @{ + */ +#define MPU_REGION_SIZE_256B ((uint8_t)0x07) +#define MPU_REGION_SIZE_512B ((uint8_t)0x08) +#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) +#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) +#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) +#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) +#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) +#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) +#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) +#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) +#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) +#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) +#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) +#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) +#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) +#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) +#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) +#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) +#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) +#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) +#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) +#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) +#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) +#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) +#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes + * @{ + */ +#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) +#define MPU_REGION_PRIV_RW ((uint8_t)0x01) +#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) +#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) +#define MPU_REGION_PRIV_RO ((uint8_t)0x05) +#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) +/** + * @} + */ + +/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number + * @{ + */ +#define MPU_REGION_NUMBER0 ((uint8_t)0x00) +#define MPU_REGION_NUMBER1 ((uint8_t)0x01) +#define MPU_REGION_NUMBER2 ((uint8_t)0x02) +#define MPU_REGION_NUMBER3 ((uint8_t)0x03) +#define MPU_REGION_NUMBER4 ((uint8_t)0x04) +#define MPU_REGION_NUMBER5 ((uint8_t)0x05) +#define MPU_REGION_NUMBER6 ((uint8_t)0x06) +#define MPU_REGION_NUMBER7 ((uint8_t)0x07) +/** + * @} + */ +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and Configuration functions + * @brief Initialization and Configuration functions + * @{ + */ +/* Initialization and Configuration functions *****************************/ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); +void HAL_NVIC_SystemReset(void); +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); +/** + * @} + */ + +/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions + * @brief Cortex control functions + * @{ + */ +/* Peripheral Control functions *************************************************/ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn); +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); +void HAL_SYSTICK_IRQHandler(void); +void HAL_SYSTICK_Callback(void); + +#if (__MPU_PRESENT == 1U) +void HAL_MPU_Enable(uint32_t MPU_Control); +void HAL_MPU_Disable(void); +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CORTEX_Private_Macros CORTEX Private Macros + * @{ + */ +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4U) + +#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) > SysTick_IRQn) + +#if (__MPU_PRESENT == 1) +#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ + ((STATE) == MPU_REGION_DISABLE)) + +#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ + ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) + +#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ + ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) + +#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ + ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) + +#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ + ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) + +#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ + ((TYPE) == MPU_TEX_LEVEL1) || \ + ((TYPE) == MPU_TEX_LEVEL2)) + +#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RW) || \ + ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ + ((TYPE) == MPU_REGION_FULL_ACCESS) || \ + ((TYPE) == MPU_REGION_PRIV_RO) || \ + ((TYPE) == MPU_REGION_PRIV_RO_URO)) + +#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ + ((NUMBER) == MPU_REGION_NUMBER1) || \ + ((NUMBER) == MPU_REGION_NUMBER2) || \ + ((NUMBER) == MPU_REGION_NUMBER3) || \ + ((NUMBER) == MPU_REGION_NUMBER4) || \ + ((NUMBER) == MPU_REGION_NUMBER5) || \ + ((NUMBER) == MPU_REGION_NUMBER6) || \ + ((NUMBER) == MPU_REGION_NUMBER7)) + +#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_256B) || \ + ((SIZE) == MPU_REGION_SIZE_512B) || \ + ((SIZE) == MPU_REGION_SIZE_1KB) || \ + ((SIZE) == MPU_REGION_SIZE_2KB) || \ + ((SIZE) == MPU_REGION_SIZE_4KB) || \ + ((SIZE) == MPU_REGION_SIZE_8KB) || \ + ((SIZE) == MPU_REGION_SIZE_16KB) || \ + ((SIZE) == MPU_REGION_SIZE_32KB) || \ + ((SIZE) == MPU_REGION_SIZE_64KB) || \ + ((SIZE) == MPU_REGION_SIZE_128KB) || \ + ((SIZE) == MPU_REGION_SIZE_256KB) || \ + ((SIZE) == MPU_REGION_SIZE_512KB) || \ + ((SIZE) == MPU_REGION_SIZE_1MB) || \ + ((SIZE) == MPU_REGION_SIZE_2MB) || \ + ((SIZE) == MPU_REGION_SIZE_4MB) || \ + ((SIZE) == MPU_REGION_SIZE_8MB) || \ + ((SIZE) == MPU_REGION_SIZE_16MB) || \ + ((SIZE) == MPU_REGION_SIZE_32MB) || \ + ((SIZE) == MPU_REGION_SIZE_64MB) || \ + ((SIZE) == MPU_REGION_SIZE_128MB) || \ + ((SIZE) == MPU_REGION_SIZE_256MB) || \ + ((SIZE) == MPU_REGION_SIZE_512MB) || \ + ((SIZE) == MPU_REGION_SIZE_1GB) || \ + ((SIZE) == MPU_REGION_SIZE_2GB) || \ + ((SIZE) == MPU_REGION_SIZE_4GB)) + +#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FFU) +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_CORTEX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_crc.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_crc.h new file mode 100644 index 0000000000..3b7e6cb2a9 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_crc.h @@ -0,0 +1,342 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_crc.h + * @author MCD Application Team + * @brief Header file of CRC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_CRC_H +#define STM32WL3x_HAL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup CRC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup CRC_Exported_Types CRC Exported Types + * @{ + */ + +/** + * @brief CRC HAL State Structure definition + */ +typedef enum +{ + HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */ + HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */ + HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */ + HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */ + HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */ +} HAL_CRC_StateTypeDef; + +/** + * @brief CRC Init Structure definition + */ +typedef struct +{ + uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used. + If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default + X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + + X^4 + X^2+ X +1. + In that case, there is no need to set GeneratingPolynomial field. + If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and + CRCLength fields must be set. */ + + uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used. + If set to DEFAULT_INIT_VALUE_ENABLE, resort to default + 0xFFFFFFFF value. In that case, there is no need to set InitValue field. If + otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */ + + uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree + respectively equal to 7, 8, 16 or 32. This field is written in normal, + representation e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 + is written 0x65. No need to specify it if DefaultPolynomialUse is set to + DEFAULT_POLYNOMIAL_ENABLE. */ + + uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length. + Value can be either one of + @arg @ref CRC_POLYLENGTH_32B (32-bit CRC), + @arg @ref CRC_POLYLENGTH_16B (16-bit CRC), + @arg @ref CRC_POLYLENGTH_8B (8-bit CRC), + @arg @ref CRC_POLYLENGTH_7B (7-bit CRC). */ + + uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse + is set to DEFAULT_INIT_VALUE_ENABLE. */ + + uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode. + Can be either one of the following values + @arg @ref CRC_INPUTDATA_INVERSION_NONE no input data inversion + @arg @ref CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D + becomes 0x58D43CB2 + @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, + 0x1A2B3C4D becomes 0xD458B23C + @arg @ref CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D + becomes 0xB23CD458 */ + + uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode. + Can be either + @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion, + @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE CRC 0x11223344 is converted + into 0x22CC4488 */ +} CRC_InitTypeDef; + +/** + * @brief CRC Handle Structure definition + */ +typedef struct +{ + CRC_TypeDef *Instance; /*!< Register base address */ + + CRC_InitTypeDef Init; /*!< CRC configuration parameters */ + + HAL_LockTypeDef Lock; /*!< CRC Locking object */ + + __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */ + + uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format. + Can be either + @arg @ref CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes + (8-bit data) + @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of + half-words (16-bit data) + @arg @ref CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words + (32-bit data) + + Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization + error must occur if InputBufferFormat is not one of the three values listed + above */ +} CRC_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRC_Exported_Constants CRC Exported Constants + * @{ + */ + +/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial + * @{ + */ +#define DEFAULT_CRC32_POLY 0x04C11DB7U /*!< X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1 */ +/** + * @} + */ + +/** @defgroup CRC_Default_InitValue Default CRC computation initialization value + * @{ + */ +#define DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Initial CRC default value */ +/** + * @} + */ + +/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used + * @{ + */ +#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00U) /*!< Enable default generating polynomial 0x04C11DB7 */ +#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01U) /*!< Disable default generating polynomial 0x04C11DB7 */ +/** + * @} + */ + +/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used + * @{ + */ +#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00U) /*!< Enable initial CRC default value */ +#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01U) /*!< Disable initial CRC default value */ +/** + * @} + */ + +/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the peripheral + * @{ + */ +#define CRC_POLYLENGTH_32B 0x00000000U /*!< Resort to a 32-bit long generating polynomial */ +#define CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< Resort to a 16-bit long generating polynomial */ +#define CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< Resort to a 8-bit long generating polynomial */ +#define CRC_POLYLENGTH_7B CRC_CR_POLYSIZE /*!< Resort to a 7-bit long generating polynomial */ +/** + * @} + */ + +/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions + * @{ + */ +#define HAL_CRC_LENGTH_32B 32U /*!< 32-bit long CRC */ +#define HAL_CRC_LENGTH_16B 16U /*!< 16-bit long CRC */ +#define HAL_CRC_LENGTH_8B 8U /*!< 8-bit long CRC */ +#define HAL_CRC_LENGTH_7B 7U /*!< 7-bit long CRC */ +/** + * @} + */ + +/** @defgroup CRC_Input_Buffer_Format Input Buffer Format + * @{ + */ +/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but + * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set + * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for + * the CRC APIs to provide a correct result */ +#define CRC_INPUTDATA_FORMAT_UNDEFINED 0x00000000U /*!< Undefined input data format */ +#define CRC_INPUTDATA_FORMAT_BYTES 0x00000001U /*!< Input data in byte format */ +#define CRC_INPUTDATA_FORMAT_HALFWORDS 0x00000002U /*!< Input data in half-word format */ +#define CRC_INPUTDATA_FORMAT_WORDS 0x00000003U /*!< Input data in word format */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CRC_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @brief Reset CRC handle state. + * @param __HANDLE__ CRC handle. + * @retval None + */ +#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET) + +/** + * @brief Reset CRC Data Register. + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET) + +/** + * @brief Set CRC INIT non-default value + * @param __HANDLE__ CRC handle + * @param __INIT__ 32-bit initial value + * @retval None + */ +#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__)) + +/** + * @brief Store data in the Independent Data (ID) register. + * @param __HANDLE__ CRC handle + * @param __VALUE__ Value to be stored in the ID register + * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits + * @retval None + */ +#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__))) + +/** + * @brief Return the data stored in the Independent Data (ID) register. + * @param __HANDLE__ CRC handle + * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits + * @retval Value of the ID register + */ +#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR) +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRC_Private_Macros CRC Private Macros + * @{ + */ + +#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \ + ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE)) + +#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \ + ((VALUE) == DEFAULT_INIT_VALUE_DISABLE)) + +#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \ + ((LENGTH) == CRC_POLYLENGTH_16B) || \ + ((LENGTH) == CRC_POLYLENGTH_8B) || \ + ((LENGTH) == CRC_POLYLENGTH_7B)) + +#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \ + ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \ + ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS)) + +/** + * @} + */ + +/* Include CRC HAL Extended module */ +#include "stm32wl3x_hal_crc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc); +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc); +void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc); +/** + * @} + */ + +/* Peripheral Control functions ***********************************************/ +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @{ + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(const CRC_HandleTypeDef *hcrc); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_CRC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_crc_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_crc_ex.h new file mode 100644 index 0000000000..6df95ece51 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_crc_ex.h @@ -0,0 +1,150 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_crc_ex.h + * @author MCD Application Team + * @brief Header file of CRC HAL extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_CRC_EX_H +#define STM32WL3x_HAL_CRC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup CRCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRCEx_Exported_Constants CRC Extended Exported Constants + * @{ + */ + +/** @defgroup CRCEx_Input_Data_Inversion Input Data Inversion Modes + * @{ + */ +#define CRC_INPUTDATA_INVERSION_NONE 0x00000000U /*!< No input data inversion */ +#define CRC_INPUTDATA_INVERSION_BYTE CRC_CR_REV_IN_0 /*!< Byte-wise input data inversion */ +#define CRC_INPUTDATA_INVERSION_HALFWORD CRC_CR_REV_IN_1 /*!< HalfWord-wise input data inversion */ +#define CRC_INPUTDATA_INVERSION_WORD CRC_CR_REV_IN /*!< Word-wise input data inversion */ +/** + * @} + */ + +/** @defgroup CRCEx_Output_Data_Inversion Output Data Inversion Modes + * @{ + */ +#define CRC_OUTPUTDATA_INVERSION_DISABLE 0x00000000U /*!< No output data inversion */ +#define CRC_OUTPUTDATA_INVERSION_ENABLE CRC_CR_REV_OUT /*!< Bit-wise output data inversion */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRCEx_Exported_Macros CRC Extended Exported Macros + * @{ + */ + +/** + * @brief Set CRC output reversal + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT) + +/** + * @brief Unset CRC output reversal + * @param __HANDLE__ CRC handle + * @retval None + */ +#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT)) + +/** + * @brief Set CRC non-default polynomial + * @param __HANDLE__ CRC handle + * @param __POLYNOMIAL__ 7, 8, 16 or 32-bit polynomial + * @retval None + */ +#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__)) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRCEx_Private_Macros CRC Extended Private Macros + * @{ + */ + +#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_INPUTDATA_INVERSION_NONE) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_BYTE) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \ + ((MODE) == CRC_INPUTDATA_INVERSION_WORD)) + +#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLE) || \ + ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLE)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CRCEx_Exported_Functions + * @{ + */ + +/** @addtogroup CRCEx_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength); +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode); +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_CRC_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_cryp.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_cryp.h new file mode 100644 index 0000000000..c516e8db6e --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_cryp.h @@ -0,0 +1,650 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_cryp.h + * @author MCD Application Team + * @brief Header file of CRYP HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_CRYP_H +#define STM32WL3x_HAL_CRYP_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +#if defined(AES) + +/** @defgroup CRYP CRYP + * @brief CRYP HAL module driver. + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup CRYP_Exported_Types CRYP Exported Types + * @{ + */ + +/** + * @brief CRYP Init Structure definition + */ + +typedef struct +{ + uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string. + This parameter can be a value of @ref CRYP_Data_Type */ + uint32_t KeySize; /*!< Used only in AES mode : 128, 192 or 256 bit key length in CRYP1. + 128 or 256 bit key length in TinyAES + This parameter can be a value of @ref CRYP_Key_Size */ + uint32_t *pKey; /*!< The key used for encryption/decryption */ + uint32_t *pInitVect; /*!< The initialization vector used also as initialization + counter in CTR mode */ + uint32_t Algorithm; /*!< DES/ TDES Algorithm ECB/CBC + AES Algorithm ECB/CBC/CTR/GCM or CCM + This parameter can be a value of @ref CRYP_Algorithm_Mode */ + uint32_t *Header; /*!< used only in AES GCM and CCM Algorithm for authentication, + GCM : also known as Additional Authentication Data + CCM : named B1 composed of the associated data length and Associated Data. */ + uint32_t HeaderSize; /*!< The size of header buffer */ + uint32_t *B0; /*!< B0 is first authentication block used only in AES CCM mode */ + uint32_t DataWidthUnit; /*!< Payload Data Width Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/ + uint32_t HeaderWidthUnit; /*!< Header Width Unit, this parameter can be value of @ref CRYP_Header_Width_Unit*/ + uint32_t KeyIVConfigSkip; /*!< CRYP peripheral Key and IV configuration skip, to config Key and Initialization + Vector only once and to skip configuration for consecutive processings. + This parameter can be a value of @ref CRYP_Configuration_Skip */ + +} CRYP_ConfigTypeDef; + + +/** + * @brief CRYP State Structure definition + */ + +typedef enum +{ + HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */ + HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */ + HAL_CRYP_STATE_BUSY = 0x02U, /*!< CRYP BUSY, internal processing is ongoing */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + HAL_CRYP_STATE_SUSPENDED = 0x03U, /*!< CRYP suspended */ +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ +} HAL_CRYP_STATETypeDef; + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +/** + * @brief HAL CRYP mode suspend definitions + */ +typedef enum +{ + HAL_CRYP_SUSPEND_NONE = 0x00U, /*!< CRYP processing suspension not requested */ + HAL_CRYP_SUSPEND = 0x01U /*!< CRYP processing suspension requested */ +} HAL_SuspendTypeDef; +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + +/** + * @brief CRYP handle Structure definition + */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) +typedef struct __CRYP_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +{ + AES_TypeDef *Instance; /*!< AES Register base address */ + + CRYP_ConfigTypeDef Init; /*!< CRYP required parameters */ + + FunctionalState AutoKeyDerivation; /*!< Used only in TinyAES to allow to bypass or not key write-up before decryption. + This parameter can be a value of ENABLE/DISABLE */ + + uint32_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ + + uint32_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ + + __IO uint16_t CrypHeaderCount; /*!< Counter of header data in words */ + + __IO uint16_t CrypInCount; /*!< Counter of input data in words */ + + __IO uint16_t CrypOutCount; /*!< Counter of output data in words */ + + uint16_t Size; /*!< Length of input data */ + + uint32_t Phase; /*!< CRYP peripheral phase */ + + DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */ + + DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */ + + HAL_LockTypeDef Lock; /*!< CRYP locking object */ + + __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */ + + __IO uint32_t ErrorCode; /*!< CRYP peripheral error code */ + + uint32_t KeyIVConfig; /*!< CRYP peripheral Key and IV configuration flag, used when + configuration can be skipped */ + + uint32_t SizesSum; /*!< Sum of successive payloads lengths (in bytes), stored + for a single signature computation after several + messages processing */ + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + void (*InCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Input FIFO transfer completed callback */ + void (*OutCpltCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Output FIFO transfer completed callback */ + void (*ErrorCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Error callback */ + + void (* MspInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp Init callback */ + void (* MspDeInitCallback)(struct __CRYP_HandleTypeDef *hcryp); /*!< CRYP Msp DeInit callback */ + +#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */ + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + + __IO HAL_SuspendTypeDef SuspendRequest; /*!< CRYP peripheral suspension request flag */ + + CRYP_ConfigTypeDef Init_saved; /*!< copy of CRYP required parameters when processing is suspended */ + + uint32_t *pCrypInBuffPtr_saved; /*!< copy of CRYP input pointer when processing is suspended */ + + uint32_t *pCrypOutBuffPtr_saved; /*!< copy of CRYP output pointer when processing is suspended */ + + uint32_t CrypInCount_saved; /*!< copy of CRYP input data counter when processing is suspended */ + + uint32_t CrypOutCount_saved; /*!< copy of CRYP output data counter when processing is suspended */ + + uint32_t Phase_saved; /*!< copy of CRYP authentication phase when processing is suspended */ + + __IO HAL_CRYP_STATETypeDef State_saved; /*!< copy of CRYP peripheral state when processing is suspended */ + + uint32_t IV_saved[4]; /*!< copy of Initialisation Vector registers */ + + uint32_t SUSPxR_saved[8]; /*!< copy of suspension registers */ + + uint32_t CR_saved; /*!< copy of CRYP control register when processing is suspended*/ + + uint32_t Key_saved[8]; /*!< copy of key registers */ + + uint16_t Size_saved; /*!< copy of input buffer size */ + + uint16_t CrypHeaderCount_saved; /*!< copy of CRYP header data counter when processing is suspended */ + + uint32_t SizesSum_saved; /*!< copy of SizesSum when processing is suspended */ + + uint32_t ResumingFlag; /*!< resumption flag to bypass steps already carried out */ + + FunctionalState AutoKeyDerivation_saved; /*!< copy of CRYP handle auto key derivation parameter */ + +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + +} CRYP_HandleTypeDef; + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +/** @defgroup HAL_CRYP_Callback_ID_enumeration_definition HAL CRYP Callback ID enumeration definition + * @brief HAL CRYP Callback ID enumeration definition + * @{ + */ +typedef enum +{ + HAL_CRYP_MSPINIT_CB_ID = 0x00U, /*!< CRYP MspInit callback ID */ + HAL_CRYP_MSPDEINIT_CB_ID = 0x01U, /*!< CRYP MspDeInit callback ID */ + HAL_CRYP_INPUT_COMPLETE_CB_ID = 0x02U, /*!< CRYP Input FIFO transfer completed callback ID */ + HAL_CRYP_OUTPUT_COMPLETE_CB_ID = 0x03U, /*!< CRYP Output FIFO transfer completed callback ID */ + HAL_CRYP_ERROR_CB_ID = 0x04U, /*!< CRYP Error callback ID */ +} HAL_CRYP_CallbackIDTypeDef; +/** + * @} + */ + +/** @defgroup HAL_CRYP_Callback_pointer_definition HAL CRYP Callback pointer definition + * @brief HAL CRYP Callback pointer definition + * @{ + */ + +typedef void (*pCRYP_CallbackTypeDef)(CRYP_HandleTypeDef *hcryp); /*!< pointer to a common CRYP callback function */ + +/** + * @} + */ + +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRYP_Exported_Constants CRYP Exported Constants + * @{ + */ + +/** @defgroup CRYP_Error_Definition CRYP Error Definition + * @{ + */ +#define HAL_CRYP_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_CRYP_ERROR_WRITE 0x00000001U /*!< Write error */ +#define HAL_CRYP_ERROR_READ 0x00000002U /*!< Read error */ +#define HAL_CRYP_ERROR_DMA 0x00000004U /*!< DMA error */ +#define HAL_CRYP_ERROR_BUSY 0x00000008U /*!< Busy flag error */ +#define HAL_CRYP_ERROR_TIMEOUT 0x00000010U /*!< Timeout error */ +#define HAL_CRYP_ERROR_NOT_SUPPORTED 0x00000020U /*!< Not supported mode */ +#define HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE 0x00000040U /*!< Sequence are not respected only for GCM or CCM */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +#define HAL_CRYP_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback error */ +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup CRYP_Data_Width_Unit CRYP Data Width Unit + * @{ + */ + +#define CRYP_DATAWIDTHUNIT_WORD 0x00000000U /*!< By default, size unit is word */ +#define CRYP_DATAWIDTHUNIT_BYTE 0x00000001U /*!< By default, size unit is byte */ + +/** + * @} + */ + +/** @defgroup CRYP_Header_Width_Unit CRYP Header Width Unit + * @{ + */ + +#define CRYP_HEADERWIDTHUNIT_WORD 0x00000000U /*!< By default, header size unit is word */ +#define CRYP_HEADERWIDTHUNIT_BYTE 0x00000001U /*!< By default, header size unit is byte */ + +/** + * @} + */ + +/** @defgroup CRYP_Algorithm_Mode CRYP Algorithm Mode + * @{ + */ + +#define CRYP_AES_ECB 0x00000000U /*!< Electronic codebook chaining algorithm */ +#define CRYP_AES_CBC AES_CR_CHMOD_0 /*!< Cipher block chaining algorithm */ +#define CRYP_AES_CTR AES_CR_CHMOD_1 /*!< Counter mode chaining algorithm */ +#define CRYP_AES_GCM_GMAC (AES_CR_CHMOD_0 | AES_CR_CHMOD_1) /*!< Galois counter mode - Galois message authentication code */ +#define CRYP_AES_CCM AES_CR_CHMOD_2 /*!< Counter with Cipher Mode */ + +/** + * @} + */ + +/** @defgroup CRYP_Key_Size CRYP Key Size + * @{ + */ + +#define CRYP_KEYSIZE_128B 0x00000000U /*!< 128-bit long key */ +#define CRYP_KEYSIZE_256B AES_CR_KEYSIZE /*!< 256-bit long key */ + +/** + * @} + */ + +/** @defgroup CRYP_Data_Type CRYP Data Type + * @{ + */ + +#define CRYP_DATATYPE_32B 0x00000000U /*!< 32-bit data type (no swapping) */ +#define CRYP_DATATYPE_16B AES_CR_DATATYPE_0 /*!< 16-bit data type (half-word swapping) */ +#define CRYP_DATATYPE_8B AES_CR_DATATYPE_1 /*!< 8-bit data type (byte swapping) */ +#define CRYP_DATATYPE_1B AES_CR_DATATYPE /*!< 1-bit data type (bit swapping) */ + +/** + * @} + */ + +/** @defgroup CRYP_Interrupt CRYP Interrupt + * @{ + */ + +#define CRYP_IT_CCFIE AES_CR_CCFIE /*!< Computation Complete interrupt enable */ +#define CRYP_IT_ERRIE AES_CR_ERRIE /*!< Error interrupt enable */ +#define CRYP_IT_WRERR AES_SR_WRERR /*!< Write Error */ +#define CRYP_IT_RDERR AES_SR_RDERR /*!< Read Error */ +#define CRYP_IT_CCF AES_SR_CCF /*!< Computation completed */ + +/** + * @} + */ + +/** @defgroup CRYP_Flags CRYP Flags + * @{ + */ + +/* status flags */ +#define CRYP_FLAG_BUSY AES_SR_BUSY /*!< GCM process suspension forbidden */ +#define CRYP_FLAG_WRERR AES_SR_WRERR /*!< Write Error */ +#define CRYP_FLAG_RDERR AES_SR_RDERR /*!< Read error */ +#define CRYP_FLAG_CCF AES_SR_CCF /*!< Computation completed */ +/* clearing flags */ +#define CRYP_CCF_CLEAR AES_CR_CCFC /*!< Computation Complete Flag Clear */ +#define CRYP_ERR_CLEAR AES_CR_ERRC /*!< Error Flag Clear */ + +/** + * @} + */ + +/** @defgroup CRYP_Configuration_Skip CRYP Key and IV Configuration Skip Mode + * @{ + */ + +#define CRYP_KEYIVCONFIG_ALWAYS 0x00000000U /*!< Peripheral Key and IV configuration to do systematically */ +#define CRYP_KEYIVCONFIG_ONCE 0x00000001U /*!< Peripheral Key and IV configuration to do only once */ + +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup CRYP_Exported_Macros CRYP Exported Macros + * @{ + */ + +/** @brief Reset CRYP handle state + * @param __HANDLE__ specifies the CRYP handle. + * @retval None + */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) do{\ + (__HANDLE__)->State = HAL_CRYP_STATE_RESET;\ + (__HANDLE__)->MspInitCallback = NULL;\ + (__HANDLE__)->MspDeInitCallback = NULL;\ + }while(0U) +#else +#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ( (__HANDLE__)->State = HAL_CRYP_STATE_RESET) +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + +/** + * @brief Enable/Disable the CRYP peripheral. + * @param __HANDLE__ specifies the CRYP handle. + * @retval None + */ + +#define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= AES_CR_EN) +#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~AES_CR_EN) + + +/** @brief Check whether the specified CRYP status flag is set or not. + * @param __HANDLE__ specifies the CRYP handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_FLAG_BUSY GCM process suspension forbidden + * @arg @ref CRYP_IT_WRERR Write Error + * @arg @ref CRYP_IT_RDERR Read Error + * @arg @ref CRYP_IT_CCF Computation Complete + * This parameter can be one of the following values for CRYP: + * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data + * or a key preparation (for AES decryption). + * @arg CRYP_FLAG_IFEM: Input FIFO is empty + * @arg CRYP_FLAG_IFNF: Input FIFO is not full + * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending + * @arg CRYP_FLAG_OFNE: Output FIFO is not empty + * @arg CRYP_FLAG_OFFU: Output FIFO is full + * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending + * @retval The state of __FLAG__ (TRUE or FALSE). + */ + +#define CRYP_FLAG_MASK 0x0000001FU +#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the CRYP pending status flag. + * @param __HANDLE__ specifies the CRYP handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be one of the following values: + * @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear + * @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear + * @retval None + */ + +#define __HAL_CRYP_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT((__HANDLE__)->Instance->CR, (__FLAG__)) + + +/** @brief Check whether the specified CRYP interrupt source is enabled or not. + * @param __HANDLE__ specifies the CRYP handle. + * @param __INTERRUPT__ CRYP interrupt source to check + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) + * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt + * @retval State of interruption (TRUE or FALSE). + */ + +#define __HAL_CRYP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR &\ + (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Check whether the specified CRYP interrupt is set or not. + * @param __HANDLE__ specifies the CRYP handle. + * @param __INTERRUPT__ specifies the interrupt to check. + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_IT_WRERR Write Error + * @arg @ref CRYP_IT_RDERR Read Error + * @arg @ref CRYP_IT_CCF Computation Complete + * This parameter can be one of the following values for CRYP: + * @arg CRYP_IT_INI: Input FIFO service masked interrupt status + * @arg CRYP_IT_OUTI: Output FIFO service masked interrupt status + * @retval The state of __INTERRUPT__ (TRUE or FALSE). + */ + +#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** + * @brief Enable the CRYP interrupt. + * @param __HANDLE__ specifies the CRYP handle. + * @param __INTERRUPT__ CRYP Interrupt. + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) + * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt + * This parameter can be one of the following values for CRYP: + * @ CRYP_IT_INI : Input FIFO service interrupt mask. + * @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt. + * @retval None + */ + +#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) + +/** + * @brief Disable the CRYP interrupt. + * @param __HANDLE__ specifies the CRYP handle. + * @param __INTERRUPT__ CRYP Interrupt. + * This parameter can be one of the following values for TinyAES: + * @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR) + * @arg @ref CRYP_IT_CCFIE Computation Complete interrupt + * This parameter can be one of the following values for CRYP: + * @ CRYP_IT_INI : Input FIFO service interrupt mask. + * @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt. + * @retval None + */ + +#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) + +/** + * @} + */ + +/* Include CRYP HAL Extended module */ +#include "stm32wl3x_hal_cryp_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRYP_Exported_Functions CRYP Exported Functions + * @{ + */ + +/** @addtogroup CRYP_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf); +HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf); +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, + pCRYP_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +void HAL_CRYP_ProcessSuspend(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_Suspend(CRYP_HandleTypeDef *hcryp); +HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp); +#endif /* defined (USE_HAL_CRYP_SUSPEND_RESUME) */ +/** + * @} + */ + +/** @addtogroup CRYP_Exported_Functions_Group2 + * @{ + */ + +/* encryption/decryption ***********************************/ +HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, + uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, + uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); +HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); +HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); +HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output); + +/** + * @} + */ + + +/** @addtogroup CRYP_Exported_Functions_Group3 + * @{ + */ +/* Interrupt Handler functions **********************************************/ +void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp); +HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp); +void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp); +uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp); + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup CRYP_Private_Macros CRYP Private Macros + * @{ + */ + +/** @defgroup CRYP_IS_CRYP_Definitions CRYP Private macros to check input parameters + * @{ + */ + +#define IS_CRYP_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_AES_ECB) || \ + ((ALGORITHM) == CRYP_AES_CBC) || \ + ((ALGORITHM) == CRYP_AES_CTR) || \ + ((ALGORITHM) == CRYP_AES_GCM_GMAC)|| \ + ((ALGORITHM) == CRYP_AES_CCM)) + + +#define IS_CRYP_KEYSIZE(KEYSIZE)(((KEYSIZE) == CRYP_KEYSIZE_128B) || \ + ((KEYSIZE) == CRYP_KEYSIZE_256B)) + +#define IS_CRYP_DATATYPE(DATATYPE)(((DATATYPE) == CRYP_DATATYPE_32B) || \ + ((DATATYPE) == CRYP_DATATYPE_16B) || \ + ((DATATYPE) == CRYP_DATATYPE_8B) || \ + ((DATATYPE) == CRYP_DATATYPE_1B)) + +#define IS_CRYP_INIT(CONFIG)(((CONFIG) == CRYP_KEYIVCONFIG_ALWAYS) || \ + ((CONFIG) == CRYP_KEYIVCONFIG_ONCE)) + +#define IS_CRYP_BUFFERSIZE(ALGO, DATAWIDTH, SIZE) \ + (((((ALGO) == CRYP_AES_CTR)) && \ + ((((DATAWIDTH) == CRYP_DATAWIDTHUNIT_WORD) && (((SIZE) % 4U) == 0U)) || \ + (((DATAWIDTH) == CRYP_DATAWIDTHUNIT_BYTE) && (((SIZE) % 16U) == 0U)))) || \ + (((ALGO) == CRYP_AES_ECB) || ((ALGO) == CRYP_AES_CBC) || \ + ((ALGO)== CRYP_AES_GCM_GMAC) || ((ALGO) == CRYP_AES_CCM))) + +/** + * @} + */ + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CRYP_Private_Constants CRYP Private Constants + * @{ + */ + +/** + * @} + */ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup CRYP_Private_Defines CRYP Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CRYP_Private_Variables CRYP Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CRYP_Private_Functions CRYP Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* AES */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_CRYP_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_cryp_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_cryp_ex.h new file mode 100644 index 0000000000..8372315f98 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_cryp_ex.h @@ -0,0 +1,130 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_cryp_ex.h + * @author MCD Application Team + * @brief Header file of CRYPEx HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_CRYP_EX_H +#define STM32WL3x_HAL_CRYP_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +#if defined(AES) + +/** @defgroup CRYPEx CRYPEx + * @brief CRYP Extension HAL module driver. + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Private types -------------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Types CRYPEx Private Types + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Variables CRYPEx Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Constants CRYPEx Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Macros CRYPEx Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup CRYPEx_Private_Functions CRYPEx Private Functions + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions + * @{ + */ + +/** @addtogroup CRYPEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout); +HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout); + +/** + * @} + */ + +/** @addtogroup CRYPEx_Exported_Functions_Group2 + * @{ + */ +void HAL_CRYPEx_EnableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp); +void HAL_CRYPEx_DisableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* AES */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_CRYP_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_dac.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_dac.h new file mode 100644 index 0000000000..a60adf82d0 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_dac.h @@ -0,0 +1,441 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_dac.h + * @author MCD Application Team + * @brief Header file of DAC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_DAC_H +#define STM32WL3x_HAL_DAC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +#if defined(DAC1) + +/** @addtogroup DAC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Types DAC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_DAC_STATE_RESET = 0x00U, /*!< DAC not yet initialized or disabled */ + HAL_DAC_STATE_READY = 0x01U, /*!< DAC initialized and ready for use */ + HAL_DAC_STATE_BUSY = 0x02U, /*!< DAC internal processing is ongoing */ + HAL_DAC_STATE_TIMEOUT = 0x03U, /*!< DAC timeout state */ + HAL_DAC_STATE_ERROR = 0x04U /*!< DAC error state */ + +} HAL_DAC_StateTypeDef; + +/** + * @brief DAC handle Structure definition + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +typedef struct __DAC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ +{ + DAC_TypeDef *Instance; /*!< Register base address */ + + __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */ + + HAL_LockTypeDef Lock; /*!< DAC locking object */ + + DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */ + __IO uint32_t ErrorCode; /*!< DAC Error code */ + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + void (* ConvCpltCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* ConvHalfCpltCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* ErrorCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + void (* DMAUnderrunCallbackCh1)(struct __DAC_HandleTypeDef *hdac); + + void (* MspInitCallback)(struct __DAC_HandleTypeDef *hdac); + void (* MspDeInitCallback)(struct __DAC_HandleTypeDef *hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +} DAC_HandleTypeDef; + +/** + * @brief DAC Configuration regular Channel structure definition + */ +typedef struct +{ + uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. + This parameter can be a value of @ref DAC_trigger_selection */ + + uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. + This parameter can be a value of @ref DAC_output_buffer */ + + uint32_t DAC_ConnectOnChipPeripheral ; /*!< Specifies whether the DAC output is connected or not to on chip peripheral. + This parameter can be a value of @ref DAC_ConnectOnChipPeripheral */ + +} DAC_ChannelConfTypeDef; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL DAC Callback ID enumeration definition + */ +typedef enum +{ + HAL_DAC_CH1_COMPLETE_CB_ID = 0x00U, /*!< DAC CH1 Complete Callback ID */ + HAL_DAC_CH1_HALF_COMPLETE_CB_ID = 0x01U, /*!< DAC CH1 half Complete Callback ID */ + HAL_DAC_CH1_ERROR_ID = 0x02U, /*!< DAC CH1 error Callback ID */ + HAL_DAC_CH1_UNDERRUN_CB_ID = 0x03U, /*!< DAC CH1 underrun Callback ID */ + HAL_DAC_MSPINIT_CB_ID = 0x08U, /*!< DAC MspInit Callback ID */ + HAL_DAC_MSPDEINIT_CB_ID = 0x09U, /*!< DAC MspDeInit Callback ID */ + HAL_DAC_ALL_CB_ID = 0x0AU /*!< DAC All ID */ +} HAL_DAC_CallbackIDTypeDef; + +/** + * @brief HAL DAC Callback pointer definition + */ +typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Constants DAC Exported Constants + * @{ + */ + +/** @defgroup DAC_Error_Code DAC Error Code + * @{ + */ +#define HAL_DAC_ERROR_NONE 0x00U /*!< No error */ +#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01U /*!< DAC channel1 DMA underrun error */ +#define HAL_DAC_ERROR_DMA 0x04U /*!< DMA error */ +#define HAL_DAC_ERROR_TIMEOUT 0x08U /*!< Timeout error */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +#define HAL_DAC_ERROR_INVALID_CALLBACK 0x10U /*!< Invalid callback error */ +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup DAC_trigger_selection DAC trigger selection + * @{ + */ +#define DAC_TRIGGER_NONE (0x00000000UL) /*!< Conversion is automatic once the DAC_DHR register has been loaded, and not by external trigger */ +#define DAC_TRIGGER_SOFTWARE (DAC_CR_TSEL_2 | DAC_CR_TSEL_1 | DAC_CR_TSEL_0 | DAC_CR_TEN) /*!< Conversion started by software trigger for DAC channel */ +#define DAC_TRIGGER_T16_TRGO (DAC_CR_TEN) /*!< TIM16 TRGO selected as external conversion trigger for DAC channel */ +#define DAC_TRIGGER_EXT_IT8 (DAC_CR_TSEL_0 | DAC_CR_TEN) /*!< PA8 pin event selected as external conversion trigger for DAC channel */ + +/** + * @} + */ + +/** @defgroup DAC_output_buffer DAC output buffer + * @{ + */ +#define DAC_OUTPUTBUFFER_ENABLE (DAC_CR_BON) +#define DAC_OUTPUTBUFFER_DISABLE 0x00000000UL + +/** + * @} + */ + +/** @defgroup DAC_Channel_selection DAC Channel selection + * @{ + */ +#define DAC_CHANNEL_1 0x00000000U +/** + * @} + */ + +/** @defgroup DAC_data_alignment DAC data alignment + * @{ + */ + +#define DAC_ALIGN_6B_R 0x00000000UL + +/** + * @} + */ + +/** @defgroup DAC_flags_definition DAC flags definition + * @{ + */ +#define DAC_FLAG_DMAUDR (DAC_SR_DMAUDR) + +/** + * @} + */ + +/** @defgroup DAC_IT_definition DAC IT definition + * @{ + */ +#define DAC_IT_DMAUDR (DAC_SR_DMAUDR) + +/** + * @} + */ + +/** @defgroup DAC_ConnectOnChipPeripheral DAC ConnectOnChipPeripheral + * @{ + */ + +#define DAC_CHIPCONNECT_EXTERNAL (1UL << 0) +#define DAC_CHIPCONNECT_INTERNAL (1UL << 1) +#define DAC_CHIPCONNECT_BOTH (1UL << 2) + +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Macros DAC Exported Macros + * @{ + */ + +/** @brief Reset DAC handle state. + * @param __HANDLE__ specifies the DAC handle. + * @retval None + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_DAC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET) +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** @brief Enable the DAC channel. + * @param __HANDLE__ specifies the DAC handle. + * @param __DAC_Channel__ specifies the DAC channel + * @retval None + */ +#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \ + ((__HANDLE__)->Instance->CR |= (DAC_CR_EN << ((__DAC_Channel__) & 0x10UL))) + +/** @brief Disable the DAC channel. + * @param __HANDLE__ specifies the DAC handle + * @param __DAC_Channel__ specifies the DAC channel. + * @retval None + */ +#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \ + ((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN << ((__DAC_Channel__) & 0x10UL))) +/** @brief Set DHR12R1 alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008UL + (__ALIGNMENT__)) + + +/** @brief Set DHR12RD alignment. + * @param __ALIGNMENT__ specifies the DAC alignment + * @retval None + */ +#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020UL + (__ALIGNMENT__)) + +/** @brief Enable the DAC interrupt. + * @param __HANDLE__ specifies the DAC handle + * @param __INTERRUPT__ specifies the DAC interrupt. + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt + * @retval None + */ +#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) + +/** @brief Disable the DAC interrupt. + * @param __HANDLE__ specifies the DAC handle + * @param __INTERRUPT__ specifies the DAC interrupt. + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt + * @retval None + */ +#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) + +/** @brief Check whether the specified DAC interrupt source is enabled or not. + * @param __HANDLE__ DAC handle + * @param __INTERRUPT__ DAC interrupt source to check + * This parameter can be any combination of the following values: + * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt + * @retval State of interruption (SET or RESET) + */ +#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR\ + & (__INTERRUPT__)) == (__INTERRUPT__)) + +/** @brief Get the selected DAC's flag status. + * @param __HANDLE__ specifies the DAC handle. + * @param __FLAG__ specifies the DAC flag to get. + * This parameter can be any combination of the following values: + * @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag + * @retval None + */ +#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the DAC's flag. + * @param __HANDLE__ specifies the DAC handle. + * @param __FLAG__ specifies the DAC flag to clear. + * This parameter can be any combination of the following values: + * @arg DAC_FLAG_DMAUDR DAC channel 1 DMA underrun flag + * @retval None + */ +#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__)) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup DAC_Private_Macros DAC Private Macros + * @{ + */ +#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \ + ((STATE) == DAC_OUTPUTBUFFER_DISABLE)) + +#define IS_DAC_CHANNEL(CHANNEL) ((CHANNEL) == DAC_CHANNEL_1) + +#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_6B_R)) + +#define IS_DAC_DATA(DATA) ((DATA) <= 0x3FUL) + +/** + * @} + */ + +/* Include DAC HAL Extended module */ +#include "stm32wl3x_hal_dac_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DAC_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac); +HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac); +void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac); +void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac); + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, const uint32_t *pData, uint32_t Length, + uint32_t Alignment); +HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel); +void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac); +HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data); + +void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac); +void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac); + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/* DAC callback registering/unregistering */ +HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID, + pDAC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +uint32_t HAL_DAC_GetValue(const DAC_HandleTypeDef *hdac, uint32_t Channel); +HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, + const DAC_ChannelConfTypeDef *sConfig, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions_Group4 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DAC_StateTypeDef HAL_DAC_GetState(const DAC_HandleTypeDef *hdac); +uint32_t HAL_DAC_GetError(const DAC_HandleTypeDef *hdac); + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup DAC_Private_Functions DAC Private Functions + * @{ + */ +void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma); +void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma); +void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32WL3x_HAL_DAC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_dac_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_dac_ex.h new file mode 100644 index 0000000000..7ce4feedbe --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_dac_ex.h @@ -0,0 +1,155 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_dac_ex.h + * @author MCD Application Team + * @brief Header file of DAC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_DAC_EX_H +#define STM32WL3x_HAL_DAC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +#if defined(DAC1) + +/** @addtogroup DACEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL State structures definition + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DACEx_Exported_Constants DACEx Exported Constants + * @{ + */ + +/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangle amplitude + * @{ + */ + +#define DAC_LFSRUNMASK_BIT0 0x00000000UL /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ +#define DAC_LFSRUNMASK_BITS1_0 ( DAC_CR_MAMP_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS2_0 ( DAC_CR_MAMP_1 ) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS3_0 ( DAC_CR_MAMP_1 | DAC_CR_MAMP_0) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS4_0 ( DAC_CR_MAMP_2 ) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ +#define DAC_LFSRUNMASK_BITS5_0 ( DAC_CR_MAMP_2 | DAC_CR_MAMP_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ + +#define DAC_TRIANGLEAMPLITUDE_1 0x00000000UL /*!< Select max triangle amplitude of 1 */ +#define DAC_TRIANGLEAMPLITUDE_3 ( DAC_CR_MAMP_0) /*!< Select max triangle amplitude of 3 */ +#define DAC_TRIANGLEAMPLITUDE_7 ( DAC_CR_MAMP_1 ) /*!< Select max triangle amplitude of 7 */ +#define DAC_TRIANGLEAMPLITUDE_15 ( DAC_CR_MAMP_1 | DAC_CR_MAMP_0) /*!< Select max triangle amplitude of 15 */ +#define DAC_TRIANGLEAMPLITUDE_31 ( DAC_CR_MAMP_2 ) /*!< Select max triangle amplitude of 31 */ +#define DAC_TRIANGLEAMPLITUDE_63 ( DAC_CR_MAMP_2 | DAC_CR_MAMP_0) /*!< Select max triangle amplitude of 63 */ + +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + + +/* Private macro -------------------------------------------------------------*/ + +/** @defgroup DACEx_Private_Macros DACEx Private Macros + * @{ + */ +#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ + ((TRIGGER) == DAC_TRIGGER_SOFTWARE) || \ + ((TRIGGER) == DAC_TRIGGER_T16_TRGO) || \ + ((TRIGGER) == DAC_TRIGGER_EXT_IT8)) + +#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \ + ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \ + ((VALUE) == DAC_TRIANGLEAMPLITUDE_63)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/* Extended features functions ************************************************/ + +/** @addtogroup DACEx_Exported_Functions + * @{ + */ + +/** @addtogroup DACEx_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ + +HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); +HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude); + + +/** + * @} + */ + +/* VCM Buffer Control functions **********************************************/ +HAL_StatusTypeDef HAL_DACEx_EnableVCMBuffer(DAC_HandleTypeDef *hdac); +HAL_StatusTypeDef HAL_DACEx_DisableVCMBuffer(DAC_HandleTypeDef *hdac); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_DAC_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_def.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_def.h new file mode 100644 index 0000000000..fb5a90e294 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_def.h @@ -0,0 +1,196 @@ +/** + ****************************************************************************** + * @file stm32wl#x_hal_def.h + * @author MCD Application Team + * @brief This file contains HAL common defines, enumeration, macros and + * structures definitions. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32WL3x_HAL_DEF +#define __STM32WL3x_HAL_DEF + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" +#include "Legacy/stm32_hal_legacy.h" /* Aliases file for old names compatibility */ +#include +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief HAL Status structures definition + */ +typedef enum +{ + HAL_OK = 0x00, + HAL_ERROR = 0x01, + HAL_BUSY = 0x02, + HAL_TIMEOUT = 0x03 +} HAL_StatusTypeDef; + +/** + * @brief HAL Lock structures definition + */ +typedef enum +{ + HAL_UNLOCKED = 0x00, + HAL_LOCKED = 0x01 +} HAL_LockTypeDef; + +/* Exported macros -----------------------------------------------------------*/ + +#define UNUSED(X) (void)X /* To avoid gcc/g++ warnings */ + +#define HAL_MAX_DELAY 0xFFFFFFFFU + +#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) == (BIT)) +#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == 0U) + +#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ + do{ \ + (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ + (__DMA_HANDLE__).Parent = (__HANDLE__); \ + } while(0) + +/** @brief Reset the Handle's State field. + * @param __HANDLE__ specifies the Peripheral Handle. + * @note This macro can be used for the following purpose: + * - When the Handle is declared as local variable; before passing it as parameter + * to HAL_PPP_Init() for the first time, it is mandatory to use this macro + * to set to 0 the Handle's "State" field. + * Otherwise, "State" field may have any random value and the first time the function + * HAL_PPP_Init() is called, the low level hardware initialization will be missed + * (i.e. HAL_PPP_MspInit() will not be executed). + * - When there is a need to reconfigure the low level hardware: instead of calling + * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). + * In this later function, when the Handle's "State" field is set to 0, it will execute the function + * HAL_PPP_MspInit() which will reconfigure the low level hardware. + * @retval None + */ +#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) + +#if (USE_RTOS == 1) +/* Reserved for future use */ +#error " USE_RTOS should be 0 in the current HAL release " +#else +#define __HAL_LOCK(__HANDLE__) \ + do{ \ + if((__HANDLE__)->Lock == HAL_LOCKED) \ + { \ + return HAL_BUSY; \ + } \ + else \ + { \ + (__HANDLE__)->Lock = HAL_LOCKED; \ + } \ + }while (0) + +#define __HAL_UNLOCK(__HANDLE__) \ + do{ \ + (__HANDLE__)->Lock = HAL_UNLOCKED; \ + }while (0) +#endif /* USE_RTOS */ + +#if defined ( __GNUC__ ) +#ifndef __weak +#define __weak __attribute__((weak)) +#endif /* __weak */ +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif /* __packed */ +#endif /* __GNUC__ */ + + +/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ +/* GNU Compiler */ +#if defined (__GNUC__) +#ifndef __ALIGN_END +#define __ALIGN_END __attribute__ ((aligned (4))) +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +#define __ALIGN_BEGIN +#endif /* __ALIGN_BEGIN */ +#else +#ifndef __ALIGN_END +#define __ALIGN_END +#endif /* __ALIGN_END */ +#ifndef __ALIGN_BEGIN +/* ARM Compiler */ +#if defined (__CC_ARM) +#define __ALIGN_BEGIN __align(4) +/* IAR Compiler */ +#elif defined (__ICCARM__) +#define __ALIGN_BEGIN +#endif /* __CC_ARM */ +#endif /* __ALIGN_BEGIN */ +#endif /* __GNUC__ */ + +/** + * @brief __RAM_FUNC definition + */ +#if defined ( __CC_ARM ) +/* ARM Compiler + ------------ + RAM functions are defined using the toolchain options. + Functions that are executed in RAM should reside in a separate source module. + Using the 'Options for File' dialog you can simply change the 'Code / Const' + area of a module to a memory space in physical RAM. + Available memory areas are declared in the 'Target' tab of the 'Options for Target' + dialog. +*/ +#define __RAM_FUNC + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- + RAM functions are defined using a specific toolchain keyword "__ramfunc". +*/ +#define __RAM_FUNC __ramfunc + +#elif defined ( __GNUC__ ) +/* GNU Compiler + ------------ + RAM functions are defined using a specific toolchain attribute + "__attribute__((section(".RamFunc")))". +*/ +#define __RAM_FUNC __attribute__((section(".RamFunc"))) + +#endif + +/** + * @brief __NOINLINE definition + */ +#if defined ( __CC_ARM ) || defined ( __GNUC__ ) +/* ARM & GNUCompiler + ---------------- +*/ +#define __NOINLINE __attribute__ ( (noinline) ) + +#elif defined ( __ICCARM__ ) +/* ICCARM Compiler + --------------- +*/ +#define __NOINLINE _Pragma("optimize = no_inline") + +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32WL3x_HAL_DEF */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_dma.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_dma.h new file mode 100644 index 0000000000..629a215b4e --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_dma.h @@ -0,0 +1,607 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_dma.h + * @author MCD Application Team + * @brief Header file of DMA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_DMA_H +#define STM32WL3x_HAL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" +#include "stm32wl3x_ll_dma.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DMA_Exported_Types DMA Exported Types + * @{ + */ + +/** + * @brief DMA Configuration Structure definition + */ +typedef struct +{ + uint32_t Request; /*!< Specifies the request selected for the specified channel. + This parameter can be a value of @ref DMA_request */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_Data_transfer_direction */ + + uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. + This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ + + uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. + This parameter can be a value of @ref DMA_Memory_incremented_mode */ + + uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_Peripheral_data_size */ + + uint32_t MemDataAlignment; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_Memory_data_size */ + + uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_mode + @note The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_Priority_level */ +} DMA_InitTypeDef; + +/** + * @brief HAL DMA State structures definition + */ +typedef enum +{ + HAL_DMA_STATE_RESET = 0x00U, /*!< DMA not yet initialized or disabled */ + HAL_DMA_STATE_READY = 0x01U, /*!< DMA initialized and ready for use */ + HAL_DMA_STATE_BUSY = 0x02U, /*!< DMA process is ongoing */ + HAL_DMA_STATE_TIMEOUT = 0x03U, /*!< DMA timeout state */ +} HAL_DMA_StateTypeDef; + +/** + * @brief HAL DMA Error Code structure definition + */ +typedef enum +{ + HAL_DMA_FULL_TRANSFER = 0x00U, /*!< Full transfer */ + HAL_DMA_HALF_TRANSFER = 0x01U /*!< Half Transfer */ +} HAL_DMA_LevelCompleteTypeDef; + + +/** + * @brief HAL DMA Callback ID structure definition + */ +typedef enum +{ + HAL_DMA_XFER_CPLT_CB_ID = 0x00U, /*!< Full transfer */ + HAL_DMA_XFER_HALFCPLT_CB_ID = 0x01U, /*!< Half transfer */ + HAL_DMA_XFER_ERROR_CB_ID = 0x02U, /*!< Error */ + HAL_DMA_XFER_ABORT_CB_ID = 0x03U, /*!< Abort */ + HAL_DMA_XFER_ALL_CB_ID = 0x04U /*!< All */ + +} HAL_DMA_CallbackIDTypeDef; + +/** + * @brief DMA handle Structure definition + */ +typedef struct __DMA_HandleTypeDef +{ + DMA_Channel_TypeDef *Instance; /*!< Register base address */ + + DMA_InitTypeDef Init; /*!< DMA communication parameters */ + + HAL_LockTypeDef Lock; /*!< DMA locking object */ + + __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ + + void *Parent; /*!< Parent object state */ + + void (* XferCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer complete callback */ + + void (* XferHalfCpltCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA Half transfer complete callback */ + + void (* XferErrorCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer error callback */ + + void (* XferAbortCallback)(struct __DMA_HandleTypeDef *hdma); /*!< DMA transfer abort callback */ + + __IO uint32_t ErrorCode; /*!< DMA Error code */ + + DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */ + + uint32_t ChannelIndex; /*!< DMA Channel Index */ + + DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< Register base address */ +} DMA_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants DMA Exported Constants + * @{ + */ + +/** @defgroup DMA_Error_Code DMA Error Code + * @{ + */ +#define HAL_DMA_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_DMA_ERROR_TE 0x00000001U /*!< Transfer error */ +#define HAL_DMA_ERROR_NO_XFER 0x00000004U /*!< Abort requested with no Xfer ongoing */ +#define HAL_DMA_ERROR_TIMEOUT 0x00000020U /*!< Timeout error */ +#define HAL_DMA_ERROR_NOT_SUPPORTED 0x00000100U /*!< Not supported mode */ + +/** + * @} + */ + +/** @defgroup DMA_request DMA request + * @{ + */ +#define DMA_REQUEST_MEM2MEM LL_DMAMUX_REQ_MEM2MEM /*!< memory to memory transfer */ + +#define DMA_REQUEST_ADC1_DS LL_DMAMUX_REQ_ADC1_DS /*!< DMAMUX ADC Channel 0 request */ +#ifdef SPI3 +#define DMA_REQUEST_SPI3_RX LL_DMAMUX_REQ_SPI3_RX /*!< DMAMUX SPI3 RX request */ +#define DMA_REQUEST_SPI3_TX LL_DMAMUX_REQ_SPI3_TX /*!< DMAMUX SPI3 TX request */ +#endif /* SPI3 */ +#ifdef SPI1 +#define DMA_REQUEST_SPI1_RX LL_DMAMUX_REQ_SPI1_RX /*!< DMAMUX SPI1 RX request */ +#define DMA_REQUEST_SPI1_TX LL_DMAMUX_REQ_SPI1_TX /*!< DMAMUX SPI1 TX request */ +#endif /* SPI1 */ +#ifdef AES +#define DMA_REQUEST_AES_OUT LL_DMAMUX_REQ_AES_OUT /*!< DMAMUX AES RX request */ +#define DMA_REQUEST_AES_IN LL_DMAMUX_REQ_AES_IN /*!< DMAMUX AES TX request */ +#endif /* AES */ +#ifdef I2C1 +#define DMA_REQUEST_I2C1_RX LL_DMAMUX_REQ_I2C1_RX /*!< DMAMUX I2C1 RX request */ +#define DMA_REQUEST_I2C1_TX LL_DMAMUX_REQ_I2C1_TX /*!< DMAMUX I2C1 TX request */ +#endif /* I2C1 */ +#ifdef I2C2 +#define DMA_REQUEST_I2C2_RX LL_DMAMUX_REQ_I2C2_RX /*!< DMAMUX I2C3 RX request */ +#define DMA_REQUEST_I2C2_TX LL_DMAMUX_REQ_I2C2_TX /*!< DMAMUX I2C3 TX request */ +#endif /* I2C2 */ + +#define DMA_REQUEST_USART_RX LL_DMAMUX_REQ_USART1_RX /*!< DMAMUX USART1 RX request */ +#define DMA_REQUEST_USART_TX LL_DMAMUX_REQ_USART1_TX /*!< DMAMUX USART1 TX request */ + +#define DMA_REQUEST_LPUART_RX LL_DMAMUX_REQ_LPUART1_RX /*!< DMAMUX LP_UART1_RX request */ +#define DMA_REQUEST_LPUART_TX LL_DMAMUX_REQ_LPUART1_TX /*!< DMAMUX LP_UART1_RX request */ + +#ifdef TIM2 +#define DMA_REQUEST_TIM2_TRG LL_DMAMUX_REQ_TIM2_TRG /*!< DMAMUX TIM2 TRG request */ +#define DMA_REQUEST_TIM2_CH1 LL_DMAMUX_REQ_TIM2_CH1 /*!< DMAMUX TIM2 CH1 request */ +#define DMA_REQUEST_TIM2_CH2 LL_DMAMUX_REQ_TIM2_CH2 /*!< DMAMUX TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH3 LL_DMAMUX_REQ_TIM2_CH3 /*!< DMAMUX TIM2 CH3 request */ +#define DMA_REQUEST_TIM2_CH4 LL_DMAMUX_REQ_TIM2_CH4 /*!< DMAMUX TIM2 CH4 request */ +#define DMA_REQUEST_TIM2_UP LL_DMAMUX_REQ_TIM2_UP /*!< DMAMUX TIM2 UP request */ +#endif /* TIM2 */ + +#ifdef TIM16 +#define DMA_REQUEST_TIM16_CH1 LL_DMAMUX_REQ_TIM16_CH1 /*!< DMAMUX TIM16 CH1 request */ +#define DMA_REQUEST_TIM16_UP LL_DMAMUX_REQ_TIM16_UP /*!< DMAMUX TIM16 UP request */ +#define DMA_REQUEST_TIM16_TRG LL_DMAMUX_REQ_TIM16_TRG /*!< DMAMUX TIM16 UP request */ +#endif /* TIM16 */ +#ifdef DAC1 +#define DMAMUX_REQ_DAC LL_DMAMUX_REQ_DAC /*!< DMAMUX DAC request */ +#endif /* DAC */ + +#define DMA_MAX_REQUEST LL_DMAMUX_MAX_REQ +/** + * @} + */ + +/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction + * @{ + */ +#define DMA_PERIPH_TO_MEMORY LL_DMA_DIRECTION_PERIPH_TO_MEMORY /*!< Peripheral to memory direction */ +#define DMA_MEMORY_TO_PERIPH LL_DMA_DIRECTION_MEMORY_TO_PERIPH /*!< Memory to peripheral direction */ +#define DMA_MEMORY_TO_MEMORY LL_DMA_DIRECTION_MEMORY_TO_MEMORY /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode + * @{ + */ +#define DMA_PINC_ENABLE LL_DMA_PERIPH_INCREMENT /*!< Peripheral increment mode Enable */ +#define DMA_PINC_DISABLE LL_DMA_PERIPH_NOINCREMENT /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode + * @{ + */ +#define DMA_MINC_ENABLE LL_DMA_MEMORY_INCREMENT /*!< Memory increment mode Enable */ +#define DMA_MINC_DISABLE LL_DMA_MEMORY_NOINCREMENT /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size + * @{ + */ +#define DMA_PDATAALIGN_BYTE LL_DMA_PDATAALIGN_BYTE /*!< Peripheral data alignment : Byte */ +#define DMA_PDATAALIGN_HALFWORD LL_DMA_PDATAALIGN_HALFWORD /*!< Peripheral data alignment : HalfWord */ +#define DMA_PDATAALIGN_WORD LL_DMA_PDATAALIGN_WORD /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_Memory_data_size DMA Memory data size + * @{ + */ +#define DMA_MDATAALIGN_BYTE LL_DMA_MDATAALIGN_BYTE /*!< Memory data alignment : Byte */ +#define DMA_MDATAALIGN_HALFWORD LL_DMA_MDATAALIGN_HALFWORD /*!< Memory data alignment : HalfWord */ +#define DMA_MDATAALIGN_WORD LL_DMA_MDATAALIGN_WORD /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_mode DMA mode + * @{ + */ +#define DMA_NORMAL LL_DMA_MODE_NORMAL /*!< Normal mode */ +#define DMA_CIRCULAR LL_DMA_MODE_CIRCULAR /*!< Circular mode */ +/** + * @} + */ + +/** @defgroup DMA_Priority_level DMA Priority level + * @{ + */ +#define DMA_PRIORITY_LOW LL_DMA_PRIORITY_LOW /*!< Priority level : Low */ +#define DMA_PRIORITY_MEDIUM LL_DMA_PRIORITY_MEDIUM /*!< Priority level : Medium */ +#define DMA_PRIORITY_HIGH LL_DMA_PRIORITY_HIGH /*!< Priority level : High */ +#define DMA_PRIORITY_VERY_HIGH LL_DMA_PRIORITY_VERYHIGH /*!< Priority level : Very_High */ +/** + * @} + */ + + +/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions + * @{ + */ +#define DMA_IT_TC LL_DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define DMA_IT_HT LL_DMA_CCR_HTIE /*!< Half Transfer interrupt */ +#define DMA_IT_TE LL_DMA_CCR_TEIE /*!< Transfer error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_flag_definitions DMA flag definitions + * @{ + */ +#define DMA_FLAG_GL1 LL_DMA_ISR_GIF1 /*!< Channel 1 global flag */ +#define DMA_FLAG_TC1 LL_DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ +#define DMA_FLAG_HT1 LL_DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ +#define DMA_FLAG_TE1 LL_DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ +#define DMA_FLAG_GL2 LL_DMA_ISR_GIF2 /*!< Channel 2 global flag */ +#define DMA_FLAG_TC2 LL_DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ +#define DMA_FLAG_HT2 LL_DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ +#define DMA_FLAG_TE2 LL_DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ +#define DMA_FLAG_GL3 LL_DMA_ISR_GIF3 /*!< Channel 3 global flag */ +#define DMA_FLAG_TC3 LL_DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ +#define DMA_FLAG_HT3 LL_DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ +#define DMA_FLAG_TE3 LL_DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ +#define DMA_FLAG_GL4 LL_DMA_ISR_GIF4 /*!< Channel 4 global flag */ +#define DMA_FLAG_TC4 LL_DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */ +#define DMA_FLAG_HT4 LL_DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */ +#define DMA_FLAG_TE4 LL_DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */ +#define DMA_FLAG_GL5 LL_DMA_ISR_GIF5 /*!< Channel 5 global flag */ +#define DMA_FLAG_TC5 LL_DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */ +#define DMA_FLAG_HT5 LL_DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */ +#define DMA_FLAG_TE5 LL_DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */ +#define DMA_FLAG_GL6 LL_DMA_ISR_GIF6 /*!< Channel 6 global flag */ +#define DMA_FLAG_TC6 LL_DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */ +#define DMA_FLAG_HT6 LL_DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */ +#define DMA_FLAG_TE6 LL_DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */ +#define DMA_FLAG_GL7 LL_DMA_ISR_GIF7 /*!< Channel 7 global flag */ +#define DMA_FLAG_TC7 LL_DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */ +#define DMA_FLAG_HT7 LL_DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */ +#define DMA_FLAG_TE7 LL_DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */ +#define DMA_FLAG_GL8 LL_DMA_ISR_GIF8 /*!< Channel 8 global flag */ +#define DMA_FLAG_TC8 LL_DMA_ISR_TCIF8 /*!< Channel 8 transfer complete flag */ +#define DMA_FLAG_HT8 LL_DMA_ISR_HTIF8 /*!< Channel 8 half transfer flag */ +#define DMA_FLAG_TE8 LL_DMA_ISR_TEIF8 /*!< Channel 8 transfer error flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup DMA_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @brief Reset DMA handle state. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) + +/** + * @brief Enable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN) + +/** + * @brief Disable the specified DMA Channel. + * @param __HANDLE__ DMA handle + * @retval None + */ +#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN) + + +/* Interrupt & Flag management */ + +/** + * @brief Return the current DMA Channel transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer complete flag index. + */ + +#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ + (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\ + DMA_FLAG_TC8) + +/** + * @brief Return the current DMA Channel half transfer complete flag. + * @param __HANDLE__ DMA handle + * @retval The specified half transfer complete flag index. + */ +#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ + (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 : \ + DMA_FLAG_HT8) + +/** + * @brief Return the current DMA Channel transfer error flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ + (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\ + DMA_FLAG_TE8) + +/** + * @brief Return the current DMA Channel Global interrupt flag. + * @param __HANDLE__ DMA handle + * @retval The specified transfer error flag index. + */ +#define __HAL_DMA_GET_GI_FLAG_INDEX(__HANDLE__)\ + (((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_ISR_GIF1 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_ISR_GIF2 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_ISR_GIF3 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_ISR_GIF4 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_ISR_GIF5 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_ISR_GIF6 :\ + ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_ISR_GIF7 : \ + DMA_ISR_GIF8) + +/** + * @brief Get the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ Get the specified flag. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be from 1 to 8 to select the DMA Channel x flag. + * @retval The state of FLAG (SET or RESET). + */ +#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) + +/** + * @brief Clear the DMA Channel pending flags. + * @param __HANDLE__ DMA handle + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DMA_FLAG_TCx: Transfer complete flag + * @arg DMA_FLAG_HTx: Half transfer complete flag + * @arg DMA_FLAG_TEx: Transfer error flag + * @arg DMA_FLAG_GLx: Global interrupt flag + * Where x can be from 1 to 8 to select the DMA Channel x flag. + * @retval None + */ +#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) + +/** + * @brief Enable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DMA Channel interrupts. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. + * This parameter can be any combination of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval None + */ +#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified DMA Channel interrupt is enabled or not. + * @param __HANDLE__ DMA handle + * @param __INTERRUPT__ specifies the DMA interrupt source to check. + * This parameter can be one of the following values: + * @arg DMA_IT_TC: Transfer complete interrupt mask + * @arg DMA_IT_HT: Half transfer complete interrupt mask + * @arg DMA_IT_TE: Transfer error interrupt mask + * @retval The state of DMA_IT (SET or RESET). + */ +#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CCR & (__INTERRUPT__))) + +/** + * @brief Return the number of remaining data units in the current DMA Channel transfer. + * @param __HANDLE__ DMA handle + * @retval The number of remaining data units in the current DMA Channel transfer. + */ +#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup DMA_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group2 + * @{ + */ +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout); +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)); +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID); + +/** + * @} + */ + +/** @addtogroup DMA_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_Private_Macros DMA Private Macros + * @{ + */ + +#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ + ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ + ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1U) && ((SIZE) < 0x10000U)) + +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ + ((STATE) == DMA_PINC_DISABLE)) + +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ + ((STATE) == DMA_MINC_DISABLE)) + +#define IS_DMA_ALL_REQUEST(REQUEST) ((REQUEST) <= DMA_MAX_REQUEST) + +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ + ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_PDATAALIGN_WORD)) + +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ + ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ + ((SIZE) == DMA_MDATAALIGN_WORD )) + +#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ + ((MODE) == DMA_CIRCULAR)) + +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ + ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ + ((PRIORITY) == DMA_PRIORITY_HIGH) || \ + ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_DMA_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_flash.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_flash.h new file mode 100644 index 0000000000..4fc453f592 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_flash.h @@ -0,0 +1,487 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_flash.h + * @author MCD Application Team + * @brief Header file of FLASH HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_FLASH_H +#define STM32WL3x_HAL_FLASH_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Types FLASH Exported Types + * @{ + */ + +/** + * @brief FLASH Erase structure definition + */ +typedef struct +{ + uint32_t TypeErase; /*!< Mass erase or page erase. + This parameter can be a value of @ref FLASH_TYPE_ERASE */ + uint32_t Page; /*!< Initial Flash page to erase when page erase is enabled + This parameter must be a value between 0 and (max number of pages - 1) */ + uint32_t NbPages; /*!< Number of pages to be erased. + This parameter must be a value between 1 + and (max number of pages - value of initial page) */ +} FLASH_EraseInitTypeDef; + +/** + * @brief FLASH handle Structure definition + */ +typedef struct +{ + HAL_LockTypeDef Lock; /*!< FLASH locking object */ + uint32_t ErrorCode; /*!< FLASH error code */ + uint32_t ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ + uint32_t Address; /*!< Internal variable to save address selected for program in IT context */ + uint32_t Page; /*!< Internal variable to define the current page which is erasing in IT context */ + uint32_t NbPagesToErase; /*!< Internal variable to save the remaining pages to erase in IT context */ +} FLASH_ProcessTypeDef; + +/** + * @brief Page Protection function configuration structure definition + */ +typedef struct +{ + uint32_t pageProt_0; /*!< This is a bitfield built as follows: + - bit[7:0] = SIZE: number of 2 kB pages to protect including the starting page + @ref pageProt_0 param (provided in the offset bits) + - bit[15:8] = OFFSET: page number to start the write protection + (value between 0 and 0x7F) + - bit[23:16] = SIZE: same meaning of bit[7:0] + - bit[31:24] = OFFSET: same meaning of bit[15:8] */ + uint32_t pageProt_1; /*!< Same meaning of @ref pageProt_0 parameter */ + FunctionalState state; /*!< The new state of the group. + This parameter can be a value of FunctionalState */ +} FLASH_PageProtectionTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Constants FLASH Exported Constants + * @{ + */ + +/** @defgroup FLASH_WAIT_STATES FLASH Wait States + * @{ + */ +#define FLASH_WAIT_STATES_0 0x00000000UL /*!< FLASH Zero wait state */ +#define FLASH_WAIT_STATES_1 FLASH_CONFIG_WAIT_STATES_0 /*!< FLASH One wait state */ +/** + * @} + */ + +/** @defgroup FLASH_CONFIG_IRQ_VECT_TABLE FLASH Configuration Interrupt Vector Table + * @{ + */ +#define FLASH_CONFIG_IRQ_VECT_TABLE_FLASH 0x00000000UL /*!< Vector Table located in FLASH */ +#define FLASH_CONFIG_IRQ_VECT_TABLE_RAM FLASH_CONFIG_REMAP /*!< Vector Table located in RAM */ +/** + * @} + */ + +/** @defgroup FLASH_FLAGS FLASH Flags Definition + * @{ + */ +#define FLASH_FLAG_CMDDONE FLASH_IRQRAW_CMDDONE_RIS /*!< FLASH command done flag */ +#define FLASH_FLAG_CMDSTART FLASH_IRQRAW_CMDSTART_RIS /*!< FLASH command started flag */ +#define FLASH_FLAG_CMDERR FLASH_IRQRAW_CMDERR_RIS /*!< FLASH command error flag */ +#define FLASH_FLAG_ILLCMD FLASH_IRQRAW_ILLCMD_RIS /*!< FLASH illegal command flag */ +#define FLASH_FLAG_ALL_ERRORS (FLASH_IRQRAW_CMDERR_RIS | FLASH_IRQRAW_ILLCMD_RIS) /*!< Flash error flag */ +/** + * @} + */ + +/** @defgroup FLASH_INTERRUPT_DEFINITION FLASH Interrupts Definition + * @brief FLASH Interrupt definition + * @{ + */ +#define FLASH_IT_CMDDONE FLASH_IRQMASK_CMDDONEM /*!< FLASH command done Interrupt source */ +#define FLASH_IT_CMDSTART FLASH_IRQMASK_CMDSTARTM /*!< FLASH command started Interrupt source */ +#define FLASH_IT_CMDERR FLASH_IRQMASK_CMDERRM /*!< FLASH command error Interrupt source */ +#define FLASH_IT_ILLCMD FLASH_IRQMASK_ILLCMDM /*!< FLASH illegal command Interrupt source */ +/** + * @} + */ + +/** @defgroup FLASH_ERROR FLASH Error + * @{ + */ +#define HAL_FLASH_ERROR_NONE 0x00000000U +#define HAL_FLASH_ERROR_OP FLASH_FLAG_CMDERR +#define HAL_FLASH_ERROR_ILLCMD FLASH_FLAG_ILLCMD + +/** + * @} + */ + +/** @defgroup FLASH_COMMAND FLASH Command + * @{ + */ +#define FLASH_CMD_ERASE_PAGES 0x11 /*!< flash pages erase command */ +#define FLASH_CMD_MASSERASE 0x22 /*!< Flash mass erase command */ +#define FLASH_CMD_WRITE 0x33 /*!< Flash write command */ +#define FLASH_CMD_MASSREAD 0x55 /*!< Flash mass read command */ +#define FLASH_CMD_SLEEP 0xAA /*!< Flash in sleep mode command */ +#define FLASH_CMD_WAKEUP 0xBB /*!< Flash wakeup command */ +#define FLASH_CMD_BURSTWRITE 0xCC /*!< Flash burst write command */ +#define FLASH_CMD_OTPWRITE 0xEE /*!< Flash OTP write command */ +/** + * @} + */ + +/** @defgroup FLASH_TYPE_ERASE FLASH Erase Type + * @{ + */ +#define FLASH_TYPEERASE_PAGES 0x00 /*!< Pages erase */ +#define FLASH_TYPEERASE_MASSERASE 0xFF /*!< Flash mass erase */ +/** + * @} + */ + +/** @defgroup FLASH_TYPE_PROGRAM FLASH Program Type + * @{ + */ +#define FLASH_TYPEPROGRAM_WORD 0x00000000U +#define FLASH_TYPEPROGRAM_BURST 0x00000001U +/** + * @} + */ + +/** @defgroup FLASH_PAGEPROT_GROUP FLASH write/page erase protection for group + * @{ + */ +#define FLASH_PAGEPROT_GROUP_31 (0x80000000UL) /*!< write/page erase protection for group 31 containing Flash pages 248 to 255 */ +#define FLASH_PAGEPROT_GROUP_30 (0x40000000UL) /*!< write/page erase protection for group 30 containing Flash pages 240 to 247 */ +#define FLASH_PAGEPROT_GROUP_29 (0x20000000UL) /*!< write/page erase protection for group 29 containing Flash pages 232 to 239 */ +#define FLASH_PAGEPROT_GROUP_28 (0x10000000UL) /*!< write/page erase protection for group 28 containing Flash pages 224 to 231 */ +#define FLASH_PAGEPROT_GROUP_27 (0x8000000UL) /*!< write/page erase protection for group 27 containing Flash pages 216 to 223 */ +#define FLASH_PAGEPROT_GROUP_26 (0x4000000UL) /*!< write/page erase protection for group 26 containing Flash pages 208 to 215 */ +#define FLASH_PAGEPROT_GROUP_25 (0x2000000UL) /*!< write/page erase protection for group 25 containing Flash pages 200 to 207 */ +#define FLASH_PAGEPROT_GROUP_24 (0x1000000UL) /*!< write/page erase protection for group 24 containing Flash pages 192 to 199 */ +#define FLASH_PAGEPROT_GROUP_23 (0x0800000UL) /*!< write/page erase protection for group 23 containing Flash pages 184 to 191 */ +#define FLASH_PAGEPROT_GROUP_22 (0x0400000UL) /*!< write/page erase protection for group 22 containing Flash pages 176 to 183 */ +#define FLASH_PAGEPROT_GROUP_21 (0x0200000UL) /*!< write/page erase protection for group 21 containing Flash pages 168 to 175 */ +#define FLASH_PAGEPROT_GROUP_20 (0x0100000UL) /*!< write/page erase protection for group 20 containing Flash pages 160 to 167 */ +#define FLASH_PAGEPROT_GROUP_19 (0x0080000UL) /*!< write/page erase protection for group 19 containing Flash pages 152 to 159 */ +#define FLASH_PAGEPROT_GROUP_18 (0x0040000UL) /*!< write/page erase protection for group 18 containing Flash pages 144 to 151 */ +#define FLASH_PAGEPROT_GROUP_17 (0x0020000UL) /*!< write/page erase protection for group 17 containing Flash pages 136 to 143 */ +#define FLASH_PAGEPROT_GROUP_16 (0x0010000UL) /*!< write/page erase protection for group 16 containing Flash pages 128 to 135 */ +#define FLASH_PAGEPROT_GROUP_15 (0x0008000UL) /*!< write/page erase protection for group 15 containing Flash pages 120 to 127 */ +#define FLASH_PAGEPROT_GROUP_14 (0x0004000UL) /*!< write/page erase protection for group 14 containing Flash pages 112 to 119 */ +#define FLASH_PAGEPROT_GROUP_13 (0x0002000UL) /*!< write/page erase protection for group 13 containing Flash pages 104 to 111 */ +#define FLASH_PAGEPROT_GROUP_12 (0x0001000UL) /*!< write/page erase protection for group 12 containing Flash pages 96 to 103 */ +#define FLASH_PAGEPROT_GROUP_11 (0x0000800UL) /*!< write/page erase protection for group 11 containing Flash pages 88 to 95 */ +#define FLASH_PAGEPROT_GROUP_10 (0x0000400UL) /*!< write/page erase protection for group 10 containing Flash pages 80 to 87 */ +#define FLASH_PAGEPROT_GROUP_9 (0x0000200UL) /*!< write/page erase protection for group 9 containing Flash pages 72 to 79 */ +#define FLASH_PAGEPROT_GROUP_8 (0x0000100UL) /*!< write/page erase protection for group 8 containing Flash pages 64 to 71 */ +#define FLASH_PAGEPROT_GROUP_7 (0x0000080UL) /*!< write/page erase protection for group 7 containing Flash pages 56 to 63 */ +#define FLASH_PAGEPROT_GROUP_6 (0x0000040UL) /*!< write/page erase protection for group 6 containing Flash pages 48 to 55 */ +#define FLASH_PAGEPROT_GROUP_5 (0x0000020UL) /*!< write/page erase protection for group 5 containing Flash pages 40 to 47 */ +#define FLASH_PAGEPROT_GROUP_4 (0x0000010UL) /*!< write/page erase protection for group 4 containing Flash pages 32 to 39 */ +#define FLASH_PAGEPROT_GROUP_3 (0x0000008UL) /*!< write/page erase protection for group 3 containing Flash pages 24 to 31 */ +#define FLASH_PAGEPROT_GROUP_2 (0x0000004UL) /*!< write/page erase protection for group 2 containing Flash pages 16 to 23 */ +#define FLASH_PAGEPROT_GROUP_1 (0x0000002UL) /*!< write/page erase protection for group 1 containing Flash pages 8 to 15 */ +#define FLASH_PAGEPROT_GROUP_0 (0x0000001UL) /*!< write/page erase protection for group 0 containing Flash pages 0 to 7 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Macros FLASH Exported Macros + * @brief macros to control FLASH features + * @{ + */ + +/** + * @brief Set the FLASH Wait States. + * @param __WAIT_STATES__ FLASH WAIT States + * This parameter can be one of the following values : + * @arg @ref FLASH_WAIT_STATES_0 FLASH Zero wait state + * @arg @ref FLASH_WAIT_STATES_1 FLASH One wait state + * @retval None + */ +#define __HAL_FLASH_SET_WAIT_STATES(__WAIT_STATES__) MODIFY_REG(FLASH->CONFIG, FLASH_CONFIG_WAIT_STATES, (__WAIT_STATES__)) + +/** + * @brief Get the FLASH Wait States. + * @retval FLASH Wait States + * Returned value can be one of the following values : + * @arg @ref FLASH_WAIT_STATES_0 FLASH Zero wait state + * @arg @ref FLASH_WAIT_STATES_1 FLASH One wait state + */ +#define __HAL_FLASH_GET_WAIT_STATES() READ_BIT(FLASH->CONFIG, FLASH_CONFIG_WAIT_STATES) + +/** + * @brief Enable the FLASH burst write operations. + * @retval None + */ +#define __HAL_FLASH_BURSTWRITE_ENABLE() CLEAR_BIT(FLASH->CONFIG, FLASH_CONFIG_DIS_GROUP_WRITE) + +/** + * @brief Disable the FLASH burst write operations. + * @retval None + */ +#define __HAL_FLASH_BURSTWRITE_DISABLE() SET_BIT(FLASH->CONFIG, FLASH_CONFIG_DIS_GROUP_WRITE) + +/** + * @brief Set the FLASH Interrupt Vector Table location. + * @param __VECT_TABLE__ Vector Table Configuration + * This parameter can be one of the following values : + * @arg @ref FLASH_CONFIG_IRQ_VECT_TABLE_FLASH Vector Table located in FLASH + * @arg @ref FLASH_CONFIG_IRQ_VECT_TABLE_RAM Vector Table located in RAM + * @retval None + */ +#define __HAL_FLASH_SET_VECT_TABLE(__VECT_TABLE__) MODIFY_REG(FLASH->CONFIG, FLASH_CONFIG_REMAP, (__VECT_TABLE__)) + +/** + * @brief Get the FLASH Interrupt Vector Table location. + * @retval Vector Table Configuration + * Returned value can be one of the following values : + * @arg @ref FLASH_CONFIG_IRQ_VECT_TABLE_FLASH Vector Table located in FLASH + * @arg @ref FLASH_CONFIG_IRQ_VECT_TABLE_RAM Vector Table located in RAM + */ +#define __HAL_FLASH_GET_VECT_TABLE() READ_BIT(FLASH->CONFIG, FLASH_CONFIG_REMAP) + +/** + * @} + */ + +/** @defgroup FLASH_Interrupt FLASH Interrupts and Flags Macros + * @brief macros to handle FLASH interrupts + * @{ + */ + +/** + * @brief Enable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_CMDDONE Command Done Interrupt + * @arg @ref FLASH_IT_CMDSTART Command Started Interrupt + * @arg @ref FLASH_IT_CMDERR Command Error Interrupt + * @arg @ref FLASH_IT_ILLCMD Illegal Command Interrupt + * @retval none + */ +#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) CLEAR_BIT(FLASH->IRQMASK, (__INTERRUPT__)) + +/** + * @brief Disable the specified FLASH interrupt. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_CMDDONE Command Done Interrupt + * @arg @ref FLASH_IT_CMDSTART Command Started Interrupt + * @arg @ref FLASH_IT_CMDERR Command Error Interrupt + * @arg @ref FLASH_IT_ILLCMD Illegal Command Interrupt + * @retval none + */ +#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) SET_BIT(FLASH->IRQMASK, (__INTERRUPT__)) + +/** + * @brief Check whether the specified FLASH interrupt has occurred or not. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_CMDDONE Command Done Interrupt + * @arg @ref FLASH_IT_CMDSTART Command Started Interrupt + * @arg @ref FLASH_IT_CMDERR Command Error Interrupt + * @arg @ref FLASH_IT_ILLCMD Illegal Command Interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_FLASH_GET_IT(__INTERRUPT__) ((READ_BIT(FLASH->IRQSTAT, (__INTERRUPT__)) != RESET) ? SET : RESET) + +/** + * @brief Clear the specified FLASH interrupt flag. + * @param __INTERRUPT__ FLASH interrupt + * This parameter can be any combination of the following values: + * @arg @ref FLASH_IT_CMDDONE Command Done Interrupt + * @arg @ref FLASH_IT_CMDSTART Command Started Interrupt + * @arg @ref FLASH_IT_CMDERR Command Error Interrupt + * @arg @ref FLASH_IT_ILLCMD Illegal Command Interrupt + * @retval None + */ +#define __HAL_FLASH_CLEAR_IT(__INTERRUPT__) WRITE_REG(FLASH->IRQSTAT, (__INTERRUPT__)) + +/** + * @brief Check whether the specified FLASH flag is set or not. + * @param __FLAG__ specifies the FLASH flag to check. + * This parameter can be one of the following values: + * @arg @ref FLASH_FLAG_CMDDONE FLASH command done flag + * @arg @ref FLASH_FLAG_CMDSTART FLASH command started flag + * @arg @ref FLASH_FLAG_CMDERR FLASH command error flag + * @arg @ref FLASH_FLAG_ILLCMD FLASH illegal command flag + * @retval The new state of FLASH_FLAG (SET or RESET). + */ +#define __HAL_FLASH_GET_FLAG(__FLAG__) ((READ_BIT(FLASH->IRQRAW, (__FLAG__)) == (__FLAG__)) ? 1UL : 0UL) + +/** + * @brief Clear the FLASH's pending flags. + * @param __FLAG__ specifies the FLASH flags to clear. + * This parameter can be any combination of the following values: + * @arg @ref FLASH_FLAG_CMDDONE FLASH command done flag + * @arg @ref FLASH_FLAG_CMDSTART FLASH command started flag + * @arg @ref FLASH_FLAG_CMDERR FLASH command error flag + * @arg @ref FLASH_FLAG_ILLCMD FLASH illegal command flag + * @retval None + */ +#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (SET_BIT(FLASH->IRQRAW, (__FLAG__))) +/** + * @} + */ + +/* Include FLASH HAL Extended module */ +#include "stm32wl3x_hal_flash_ex.h" + +/* Exported variables --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Variables FLASH Exported Variables + * @{ + */ +extern FLASH_ProcessTypeDef pFlash; +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASH_Exported_Functions + * @{ + */ + +/* Program operation functions ***********************************************/ +/** @addtogroup FLASH_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data); +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t Data); +/* FLASH IRQ handler method */ +void HAL_FLASH_IRQHandler(void); +/* Callbacks in non blocking modes */ +void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); +void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup FLASH_Exported_Functions_Group2 + * @{ + */ +uint32_t HAL_FLASH_GetError(void); + +/** + * @} + */ + +/** + * @} + */ + +/* Private types --------------------------------------------------------*/ +/** @defgroup FLASH_Private_types FLASH Private Types + * @{ + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); +/** + * @} + */ + +/* Private constants --------------------------------------------------------*/ +/** @defgroup FLASH_Private_Constants FLASH Private Constants + * @{ + */ +#define FLASH_SIZE_MASK FLASH_FLASH_SIZE_FLASH_SIZE +#define FLASH_SIZE (((*(uint32_t *)FLASHSIZE_BASE & FLASH_SIZE_MASK) + 1) << 2U) +#define FLASH_START_ADDR FLASH_BASE +#define FLASH_END_ADDR (FLASH_START_ADDR + FLASH_SIZE - 1U) + +#define FLASH_PAGE_SIZE 0x00000800U /*!< FLASH Page Size, 2KBytes */ +#define FLASH_PAGE_NUMBER (FLASH_SIZE/FLASH_PAGE_SIZE ) +#define FLASH_TIMEOUT_VALUE 1000U /*!< FLASH Execution Timeout, 1 s */ + +#define FLASH_WRP_GRANULARITY 0x00004000U /*!< FLASH Write Protection Granularity, 16KBytes */ +#define FLASH_PCROP_GRANULARITY FLASH_SIZE /*!< FLASH Code Readout Protection Granularity, all the MAIN FLASH */ + +#define FLASH_TYPENONE 0x00000000U /*!< No Programming Procedure On Going */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup FLASH_Private_Macros FLASH Private Macros + * @{ + */ + +#define IS_FLASH_MAIN_MEM_ADDRESS(__VALUE__) (((__VALUE__) >= FLASH_START_ADDR) && ((__VALUE__) <= FLASH_END_ADDR)) + +#define IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__VALUE__) (((__VALUE__) >= FLASH_START_ADDR) &&\ + ((__VALUE__) <= (FLASH_START_ADDR + FLASH_SIZE - 4UL)) &&\ + (((__VALUE__) % 4UL) == 0UL)) + +#define IS_FLASH_PROGRAM_OTP_ADDRESS(__VALUE__) (((__VALUE__) >= OTP_AREA_BASE) &&\ + ((__VALUE__) <= (OTP_AREA_END_ADDR + 1UL - 4UL)) &&\ + (((__VALUE__) % 4UL) == 0UL)) + +#define IS_FLASH_PROGRAM_ADDRESS(__VALUE__) ((IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__VALUE__)) ||\ + (IS_FLASH_PROGRAM_OTP_ADDRESS(__VALUE__))) + +#define IS_FLASH_PAGE(__VALUE__) ((__VALUE__) <= FLASH_PAGE_NUMBER) + +#define IS_ADDR_ALIGNED_32BITS(__VALUE__) (((__VALUE__) & ~0x3U) == (__VALUE__)) + +#define IS_FLASH_WAIT_STATES(__VALUE__) (((__VALUE__) == FLASH_WAIT_STATES_0) || \ + ((__VALUE__) == FLASH_WAIT_STATES_1)) + +#define IS_FLASH_TYPE_ERASE(__VALUE__) (((__VALUE__) == FLASH_TYPEERASE_PAGES) || \ + ((__VALUE__) == FLASH_TYPEERASE_MASSERASE)) + +#define IS_FLASH_TYPEPROGRAM(__VALUE__) (((__VALUE__) == FLASH_TYPEPROGRAM_WORD) || \ + ((__VALUE__) == FLASH_TYPEPROGRAM_BURST)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_FLASH_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_flash_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_flash_ex.h new file mode 100644 index 0000000000..8c62721d82 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_flash_ex.h @@ -0,0 +1,84 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_flash_ex.h + * @author MCD Application Team + * @brief Header file of FLASH HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_FLASH_EX_H +#define STM32WL3x_HAL_FLASH_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup FLASHEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup FLASHEx_Exported_Functions + * @{ + */ + +/* Extended Program operation functions *************************************/ +/** @addtogroup FLASHEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); +HAL_StatusTypeDef HAL_FLASHEx_OTPWrite(uint32_t Address, uint32_t Data); +HAL_StatusTypeDef HAL_FLASHEx_OTPWrite_IT(uint32_t Address, uint32_t Data); +HAL_StatusTypeDef HAL_FLASHEx_PageProtection(FLASH_PageProtectionTypeDef *pageProtectionStruct); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +void FLASH_PageErase(uint32_t Page); +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_FLASH_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_gpio.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_gpio.h new file mode 100644 index 0000000000..3b83616aa2 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_gpio.h @@ -0,0 +1,349 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_GPIO_H +#define STM32WL3x_HAL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup GPIO GPIO + * @brief GPIO HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Types GPIO Exported Types + * @{ + */ +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_mode */ + + uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. + This parameter can be a value of @ref GPIO_pull */ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_speed */ + + uint32_t Alternate; /*!< Peripheral to be connected to the selected pins + This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ +} GPIO_InitTypeDef; + +/** + * @brief GPIO Bit SET and Bit RESET enumeration + */ +typedef enum +{ + GPIO_PIN_RESET = 0U, + GPIO_PIN_SET +} GPIO_PinState; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Constants GPIO Exported Constants + * @{ + */ +/** @defgroup GPIO_pins GPIO pins + * @{ + */ +#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ +#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ +#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ +#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ +#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ +#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ +#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ +#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ +#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ +#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ +#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ +#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ +#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ +#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ +#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ +#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ +#define GPIO_PIN_ALL ((uint16_t)0xFFFF) /* All pins selected */ + +#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */ +/** + * @} + */ + +/** @defgroup GPIO_mode GPIO mode + * @brief GPIO Configuration Mode + * Elements values convention: 0x0TWX00YZ + * - T : IO configuration on External IT Edge/Level + * - W : EXTI trigger detection on 3 bits + * - X : EXTI mode (IT or Event) on 2 bits + * - Y : Output type (Push Pull or Open Drain) on 1 bit + * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits + * @{ + */ +#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ +#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ +#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ +#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ +#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ +#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ +#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ +#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ +#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | EDGE_SELECTION_BOTH) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_IT_LEVEL_HIGH (MODE_INPUT | EXTI_IT | DETECTION_TYPE_LEVEL | EDGE_HIGH) /*!< External Interrupt Mode with High level trigger detection */ +#define GPIO_MODE_IT_LEVEL_LOW (MODE_INPUT | EXTI_IT | DETECTION_TYPE_LEVEL) /*!< External Interrupt Mode with Low level trigger detection */ +#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ +#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ +#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | EDGE_SELECTION_BOTH) /*!< External Event Mode with Rising/Falling edge trigger detection */ +#define GPIO_MODE_EVT_LEVEL_HIGH (MODE_INPUT | EXTI_EVT | DETECTION_TYPE_LEVEL | EDGE_HIGH) /*!< External Event Mode with High level trigger detection */ +#define GPIO_MODE_EVT_LEVEL_LOW (MODE_INPUT | EXTI_EVT | DETECTION_TYPE_LEVEL) /*!< External Event Mode with Low level trigger detection */ + +/** + * @} + */ + +/** @defgroup GPIO_speed GPIO speed + * @brief GPIO Output Maximum frequency + * @{ + */ +#define GPIO_SPEED_FREQ_LOW 0x00000000u /*!< Low speed */ +#define GPIO_SPEED_FREQ_MEDIUM 0x00000001u /*!< Medium speed */ +#define GPIO_SPEED_FREQ_HIGH 0x00000002u /*!< High speed */ +#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003u /*!< Very high speed */ +/** + * @} + */ + +/** @defgroup GPIO_pull GPIO pull + * @brief GPIO Pull-Up or Pull-Down Activation + * @{ + */ +#define GPIO_NOPULL 0x00000000u /*!< No Pull-up or Pull-down activation */ +#define GPIO_PULLUP 0x00000001u /*!< Pull-up activation */ +#define GPIO_PULLDOWN 0x00000002u /*!< Pull-down activation */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** + * @brief Check whether the specified EXTI line flag is set or not. + * @param __EXTI_PORT__ specifies the EXTI port to check. + This parameter can be GPIOA or GPIOB. + * @param __EXTI_LINE__ specifies the EXTI line flag to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_PORT__, __EXTI_LINE__) ((((uint32_t)__EXTI_PORT__) == ((uint32_t)GPIOA)) ? (SYSCFG->IO_ISCR & (__EXTI_LINE__)) : (SYSCFG->IO_ISCR & ((__EXTI_LINE__) << 16))) + +/** + * @brief Clear the EXTI's line pending flags. + * @param __EXTI_PORT__ specifies the EXTI port to check. + This parameter can be GPIOA or GPIOB. + * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_PORT__, __EXTI_LINE__) ((((uint32_t)__EXTI_PORT__) == ((uint32_t)GPIOA)) ? (SYSCFG->IO_ISCR = (__EXTI_LINE__)) : (SYSCFG->IO_ISCR = ((__EXTI_LINE__) << 16))) + +/** + * @brief Check whether the specified EXTI line is asserted or not. + * @param __EXTI_PORT__ specifies the EXTI port to check. + This parameter can be GPIOA or GPIOB. + * @param __EXTI_LINE__ specifies the EXTI line to check. + * This parameter can be GPIO_PIN_x where x can be(0..15) + * @retval The new state of __EXTI_LINE__ (SET or RESET). + */ +#define __HAL_GPIO_EXTI_GET_IT(__EXTI_PORT__, __EXTI_LINE__) ((((uint32_t)__EXTI_PORT__) == ((uint32_t)GPIOA)) ? (SYSCFG->IO_ISCR & (__EXTI_LINE__)) : (SYSCFG->IO_ISCR & ((__EXTI_LINE__) << 16))) + +/** + * @brief Clear the EXTI's line pending bits. + * @param __EXTI_PORT__ specifies the EXTI port to check. + This parameter can be GPIOA or GPIOB. + * @param __EXTI_LINE__ specifies the EXTI lines to clear. + * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) + * @retval None + */ +#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_PORT__, __EXTI_LINE__) ((((uint32_t)__EXTI_PORT__) == ((uint32_t)GPIOA)) ? (SYSCFG->IO_ISCR = (__EXTI_LINE__)) : (SYSCFG->IO_ISCR = ((__EXTI_LINE__) << 16))) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_MODE_Pos 0u +#define GPIO_MODE (0x3uL << GPIO_MODE_Pos) +#define MODE_INPUT (0x0uL << GPIO_MODE_Pos) +#define MODE_OUTPUT (0x1uL << GPIO_MODE_Pos) +#define MODE_AF (0x2uL << GPIO_MODE_Pos) +#define MODE_ANALOG (0x3uL << GPIO_MODE_Pos) +#define OUTPUT_TYPE_Pos 4u +#define OUTPUT_TYPE (0x1uL << OUTPUT_TYPE_Pos) +#define OUTPUT_PP (0x0uL << OUTPUT_TYPE_Pos) +#define OUTPUT_OD (0x1uL << OUTPUT_TYPE_Pos) +#define EXTI_MODE_Pos 16u +#define EXTI_MODE (0x3uL << EXTI_MODE_Pos) +#define EXTI_IT (0x1uL << EXTI_MODE_Pos) +#define EXTI_EVT (0x2uL << EXTI_MODE_Pos) +#define DETECTION_TYPE_Pos 18u +#define DETECTION_TYPE (0x1uL << DETECTION_TYPE_Pos) +#define DETECTION_TYPE_EDGE (0x0uL << DETECTION_TYPE_Pos) +#define DETECTION_TYPE_LEVEL (0x1uL << DETECTION_TYPE_Pos) +#define EDGE_SELECTION_Pos 20u +#define EDGE_SELECTION (0x1uL << EDGE_SELECTION_Pos) +#define EDGE_SELECTION_SINGLE (0x0uL << EDGE_SELECTION_Pos) +#define EDGE_SELECTION_BOTH (0x1uL << EDGE_SELECTION_Pos) +#define TRIGGER_MODE_Pos 22u +#define TRIGGER_MODE (0x1uL << TRIGGER_MODE_Pos) +#define TRIGGER_RISING (0x1uL << TRIGGER_MODE_Pos) +#define TRIGGER_FALLING (0x0uL << TRIGGER_MODE_Pos) +#define EDGE_LEVEL_Pos 24u +#define EDGE_LEVEL (0x1uL << EDGE_LEVEL_Pos) +#define EDGE_LOW (0x0uL << EDGE_LEVEL_Pos) +#define EDGE_HIGH (0x1uL << EDGE_LEVEL_Pos) +/** + * @} + */ + +/** @defgroup GPIO_Private_Macros GPIO Private Macros + * @{ + */ +#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) + +#define IS_GPIO_PIN(__PIN__) ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00u) &&\ + (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00u)) + +#define IS_GPIO_COMMON_PIN(__RESETMASK__, __SETMASK__) \ + (((uint32_t)(__RESETMASK__) & (uint32_t)(__SETMASK__)) == 0x00u) + + +#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ + ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ + ((__MODE__) == GPIO_MODE_AF_PP) ||\ + ((__MODE__) == GPIO_MODE_AF_OD) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING) ||\ + ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_IT_LEVEL_HIGH) ||\ + ((__MODE__) == GPIO_MODE_IT_LEVEL_LOW) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ + ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ + ((__MODE__) == GPIO_MODE_EVT_LEVEL_HIGH) ||\ + ((__MODE__) == GPIO_MODE_EVT_LEVEL_LOW) ||\ + ((__MODE__) == GPIO_MODE_ANALOG)) + +#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_HIGH) ||\ + ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ + ((__PULL__) == GPIO_PULLUP) || \ + ((__PULL__) == GPIO_PULLDOWN)) +/** + * @} + */ + +/* Include GPIO HAL Extended module */ +#include "stm32wl3x_hal_gpio_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_Exported_Functions GPIO Exported Functions + * @brief GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); + +/** + * @} + */ + +/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); +void HAL_GPIO_WriteMultipleStatePin(GPIO_TypeDef *GPIOx, uint16_t PinReset, uint16_t PinSet); +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_IRQHandler(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); +void HAL_GPIO_EXTI_Callback(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_GPIO_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_gpio_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_gpio_ex.h new file mode 100644 index 0000000000..b3517a8ef2 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_gpio_ex.h @@ -0,0 +1,165 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_gpio_ex.h + * @author MCD Application Team + * @brief Header file of GPIO HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_GPIO_EX_H +#define STM32WL3x_HAL_GPIO_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup GPIOEx GPIOEx + * @brief GPIO Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants + * @{ + */ + +/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection + * @{ + */ + + +/* The table below gives an overview of the different alternate functions per port. + * For more details refer yourself to the product data sheet. + * + */ + +#if defined(STM32WL3XX) +/** + * @brief AF 0 selection + */ +#define GPIO_AF0_LCO ((uint8_t)0x00) /*!< LCO Alternate Function mapping */ +#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< MCO Alternate Function mapping */ +#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< SWDIO Alternate Function mapping */ +#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< SWCLK Alternate Function mapping */ +#define GPIO_AF0_I2C1 ((uint8_t)0x00) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF0_I2C2 ((uint8_t)0x00) /*!< I2C2 Alternate Function mapping */ +#define GPIO_AF0_RTC ((uint8_t)0x00) /*!< RTC Alternate Function mapping */ +#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< USART Alternate Function mapping */ +#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< SPI1 Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ + +#define GPIO_AF1_SWDIO ((uint8_t)0x01) /*!< SWDIO Alternate Function mapping */ +#define GPIO_AF1_SWCLK ((uint8_t)0x01) /*!< SWCLK Alternate Function mapping */ +#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< USART Alternate Function mapping */ +#define GPIO_AF1_LPUART1 ((uint8_t)0x01) /*!< LPUART Alternate Function mapping */ + +/** + * @brief AF 2 selection + */ + +#define GPIO_AF2_COMP1 ((uint8_t)0x02) /*!< COMP1 Alternate Function mapping */ +#define GPIO_AF2_LC_ACTIVITY ((uint8_t)0x02) /*!< LC_ACTIVITY Alternate Function mapping */ +#define GPIO_AF2_LCO ((uint8_t)0x02) /*!< LCO Alternate Function mapping */ +#define GPIO_AF2_RF_ACTIVITY ((uint8_t)0x02) /*!< RF_ACTIVITY Alternate Function mapping */ +#define GPIO_AF2_RTC ((uint8_t)0x02) /*!< RTC Alternate Function mapping */ +#define GPIO_AF2_RX_SEQUENCE ((uint8_t)0x02) /*!< RX_SEQUENCE Alternate Function mapping */ +#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< TIM16 Alternate Function mapping */ +#define GPIO_AF2_TX_SEQUENCE ((uint8_t)0x02) /*!< TX_SEQUENCE Alternate Function mapping */ + +/** + * @brief AF 3 selection + */ + +#define GPIO_AF3_SPI1 ((uint8_t)0x03) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF3_SPI3 ((uint8_t)0x03) /*!< SPI3 Alternate Function mapping */ +#define GPIO_AF3_MCO ((uint8_t)0x03) /*!< MCO Alternate Function mapping */ + +/** + * @brief AF 4 selection + */ + +#define GPIO_AF4_TIM2 ((uint8_t)0x04) /*!< TIM2 Alternate Function mapping */ +#define GPIO_AF4_ANTENNA ((uint8_t)0x04) /*!< ANTENNA Alternate Function mapping */ +#define GPIO_AF4_SUBG ((uint8_t)0x04) /*!< SUBG Alternate Function mapping */ + +/** + * @brief AF 5 selection + */ + +#define GPIO_AF5_SWDIO ((uint8_t)0x05) /*!< SWDIO Alternate Function mapping */ +#define GPIO_AF5_SWCLK ((uint8_t)0x05) /*!< SWCLK Alternate Function mapping */ + +/** + * @brief AF 6 selection + */ + +#define GPIO_AF6_LCD ((uint8_t)0x06) /*!< LCD Alternate Function mapping */ + +#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06) + +#endif /* STM32WL3XX */ + + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros + * @{ + */ + +/** @defgroup GPIOEx_Get_Port_Index GPIOEx Get Port Index + * @{ + */ + +#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0uL : 1uL) + + /** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_GPIO_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_i2c.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_i2c.h new file mode 100644 index 0000000000..51b49e55ee --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_i2c.h @@ -0,0 +1,842 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_i2c.h + * @author MCD Application Team + * @brief Header file of I2C HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_I2C_H +#define STM32WL3x_HAL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2C_Exported_Types I2C Exported Types + * @{ + */ + +/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition + * @brief I2C Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value. + This parameter calculated by referring to I2C initialization section + in Reference manual */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. + This parameter can be a value of @ref I2C_ADDRESSING_MODE */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing + mode is selected. + This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref I2C_NOSTRETCH_MODE */ + +} I2C_InitTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_state_structure_definition HAL state structure definition + * @brief HAL State structure definition + * @note HAL I2C State value coding follow below described bitmap :\n + * b7-b6 Error information\n + * 00 : No Error\n + * 01 : Abort (Abort user request on going)\n + * 10 : Timeout\n + * 11 : Error\n + * b5 Peripheral initialization status\n + * 0 : Reset (peripheral not initialized)\n + * 1 : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n + * b4 (not used)\n + * x : Should be set to 0\n + * b3\n + * 0 : Ready or Busy (No Listen mode ongoing)\n + * 1 : Listen (peripheral in Address Listen Mode)\n + * b2 Intrinsic process state\n + * 0 : Ready\n + * 1 : Busy (peripheral busy with some configuration or internal operations)\n + * b1 Rx state\n + * 0 : Ready (no Rx operation ongoing)\n + * 1 : Busy (Rx operation ongoing)\n + * b0 Tx state\n + * 0 : Ready (no Tx operation ongoing)\n + * 1 : Busy (Tx operation ongoing) + * @{ + */ +typedef enum +{ + HAL_I2C_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized */ + HAL_I2C_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use */ + HAL_I2C_STATE_BUSY = 0x24U, /*!< An internal process is ongoing */ + HAL_I2C_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing */ + HAL_I2C_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_I2C_STATE_LISTEN = 0x28U, /*!< Address Listen Mode is ongoing */ + HAL_I2C_STATE_BUSY_TX_LISTEN = 0x29U, /*!< Address Listen Mode and Data Transmission + process is ongoing */ + HAL_I2C_STATE_BUSY_RX_LISTEN = 0x2AU, /*!< Address Listen Mode and Data Reception + process is ongoing */ + HAL_I2C_STATE_ABORT = 0x60U, /*!< Abort user request ongoing */ + +} HAL_I2C_StateTypeDef; + +/** + * @} + */ + +/** @defgroup HAL_mode_structure_definition HAL mode structure definition + * @brief HAL Mode structure definition + * @note HAL I2C Mode value coding follow below described bitmap :\n + * b7 (not used)\n + * x : Should be set to 0\n + * b6\n + * 0 : None\n + * 1 : Memory (HAL I2C communication is in Memory Mode)\n + * b5\n + * 0 : None\n + * 1 : Slave (HAL I2C communication is in Slave Mode)\n + * b4\n + * 0 : None\n + * 1 : Master (HAL I2C communication is in Master Mode)\n + * b3-b2-b1-b0 (not used)\n + * xxxx : Should be set to 0000 + * @{ + */ +typedef enum +{ + HAL_I2C_MODE_NONE = 0x00U, /*!< No I2C communication on going */ + HAL_I2C_MODE_MASTER = 0x10U, /*!< I2C communication is in Master Mode */ + HAL_I2C_MODE_SLAVE = 0x20U, /*!< I2C communication is in Slave Mode */ + HAL_I2C_MODE_MEM = 0x40U /*!< I2C communication is in Memory Mode */ + +} HAL_I2C_ModeTypeDef; + +/** + * @} + */ + +/** @defgroup I2C_Error_Code_definition I2C Error Code definition + * @brief I2C Error Code definition + * @{ + */ +#define HAL_I2C_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2C_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_I2C_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_I2C_ERROR_AF (0x00000004U) /*!< ACKF error */ +#define HAL_I2C_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_I2C_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_I2C_ERROR_TIMEOUT (0x00000020U) /*!< Timeout error */ +#define HAL_I2C_ERROR_SIZE (0x00000040U) /*!< Size Management error */ +#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U) /*!< DMA Parameter Error */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define HAL_I2C_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +#define HAL_I2C_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition + * @brief I2C handle Structure definition + * @{ + */ +typedef struct __I2C_HandleTypeDef +{ + I2C_TypeDef *Instance; /*!< I2C registers base address */ + + I2C_InitTypeDef Init; /*!< I2C communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ + + uint16_t XferSize; /*!< I2C transfer size */ + + __IO uint16_t XferCount; /*!< I2C transfer counter */ + + __IO uint32_t XferOptions; /*!< I2C sequantial transfer options, this parameter can + be a value of @ref I2C_XFEROPTIONS */ + + __IO uint32_t PreviousState; /*!< I2C communication Previous state */ + + HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); + /*!< I2C transfer IRQ handler function pointer */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ + +#endif /*HAL_DMA_MODULE_ENABLED*/ + + HAL_LockTypeDef Lock; /*!< I2C locking object */ + + __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ + + __IO HAL_I2C_ModeTypeDef Mode; /*!< I2C communication mode */ + + __IO uint32_t ErrorCode; /*!< I2C Error code */ + + __IO uint32_t AddrEventCount; /*!< I2C Address Event counter */ + + __IO uint32_t Devaddress; /*!< I2C Target device address */ + + __IO uint32_t Memaddress; /*!< I2C Target memory address */ + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Listen Complete callback */ + void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Tx Transfer completed callback */ + void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Memory Rx Transfer completed callback */ + void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Error callback */ + void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Abort callback */ + + void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< I2C Slave Address Match callback */ + + void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp Init callback */ + void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); + /*!< I2C Msp DeInit callback */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} I2C_HandleTypeDef; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief HAL I2C Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2C_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< I2C Master Tx Transfer completed callback ID */ + HAL_I2C_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< I2C Master Rx Transfer completed callback ID */ + HAL_I2C_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< I2C Slave Tx Transfer completed callback ID */ + HAL_I2C_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< I2C Slave Rx Transfer completed callback ID */ + HAL_I2C_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< I2C Listen Complete callback ID */ + HAL_I2C_MEM_TX_COMPLETE_CB_ID = 0x05U, /*!< I2C Memory Tx Transfer callback ID */ + HAL_I2C_MEM_RX_COMPLETE_CB_ID = 0x06U, /*!< I2C Memory Rx Transfer completed callback ID */ + HAL_I2C_ERROR_CB_ID = 0x07U, /*!< I2C Error callback ID */ + HAL_I2C_ABORT_CB_ID = 0x08U, /*!< I2C Abort callback ID */ + + HAL_I2C_MSPINIT_CB_ID = 0x09U, /*!< I2C Msp Init callback ID */ + HAL_I2C_MSPDEINIT_CB_ID = 0x0AU /*!< I2C Msp DeInit callback ID */ + +} HAL_I2C_CallbackIDTypeDef; + +/** + * @brief HAL I2C Callback pointer definition + */ +typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); +/*!< pointer to an I2C callback function */ +typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an I2C Address Match callback function */ + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_XFEROPTIONS I2C Sequential Transfer Options + * @{ + */ +#define I2C_FIRST_FRAME ((uint32_t)I2C_SOFTEND_MODE) +#define I2C_FIRST_AND_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_NEXT_FRAME ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE)) +#define I2C_FIRST_AND_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME ((uint32_t)I2C_AUTOEND_MODE) +#define I2C_LAST_FRAME_NO_STOP ((uint32_t)I2C_SOFTEND_MODE) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define I2C_OTHER_FRAME (0x000000AAU) +#define I2C_OTHER_AND_LAST_FRAME (0x0000AA00U) +/** + * @} + */ + +/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode + * @{ + */ +#define I2C_ADDRESSINGMODE_7BIT (0x00000001U) +#define I2C_ADDRESSINGMODE_10BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode + * @{ + */ +#define I2C_DUALADDRESS_DISABLE (0x00000000U) +#define I2C_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks + * @{ + */ +#define I2C_OA2_NOMASK ((uint8_t)0x00U) +#define I2C_OA2_MASK01 ((uint8_t)0x01U) +#define I2C_OA2_MASK02 ((uint8_t)0x02U) +#define I2C_OA2_MASK03 ((uint8_t)0x03U) +#define I2C_OA2_MASK04 ((uint8_t)0x04U) +#define I2C_OA2_MASK05 ((uint8_t)0x05U) +#define I2C_OA2_MASK06 ((uint8_t)0x06U) +#define I2C_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + +/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode + * @{ + */ +#define I2C_GENERALCALL_DISABLE (0x00000000U) +#define I2C_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode + * @{ + */ +#define I2C_NOSTRETCH_DISABLE (0x00000000U) +#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size + * @{ + */ +#define I2C_MEMADD_SIZE_8BIT (0x00000001U) +#define I2C_MEMADD_SIZE_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View + * @{ + */ +#define I2C_DIRECTION_TRANSMIT (0x00000000U) +#define I2C_DIRECTION_RECEIVE (0x00000001U) +/** + * @} + */ + +/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode + * @{ + */ +#define I2C_RELOAD_MODE I2C_CR2_RELOAD +#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND +#define I2C_SOFTEND_MODE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode + * @{ + */ +#define I2C_NO_STARTSTOP (0x00000000U) +#define I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition + * @brief I2C Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define I2C_IT_ERRI I2C_CR1_ERRIE +#define I2C_IT_TCI I2C_CR1_TCIE +#define I2C_IT_STOPI I2C_CR1_STOPIE +#define I2C_IT_NACKI I2C_CR1_NACKIE +#define I2C_IT_ADDRI I2C_CR1_ADDRIE +#define I2C_IT_RXI I2C_CR1_RXIE +#define I2C_IT_TXI I2C_CR1_TXIE +/** + * @} + */ + +/** @defgroup I2C_Flag_definition I2C Flag definition + * @{ + */ +#define I2C_FLAG_TXE I2C_ISR_TXE +#define I2C_FLAG_TXIS I2C_ISR_TXIS +#define I2C_FLAG_RXNE I2C_ISR_RXNE +#define I2C_FLAG_ADDR I2C_ISR_ADDR +#define I2C_FLAG_AF I2C_ISR_NACKF +#define I2C_FLAG_STOPF I2C_ISR_STOPF +#define I2C_FLAG_TC I2C_ISR_TC +#define I2C_FLAG_TCR I2C_ISR_TCR +#define I2C_FLAG_BERR I2C_ISR_BERR +#define I2C_FLAG_ARLO I2C_ISR_ARLO +#define I2C_FLAG_OVR I2C_ISR_OVR +#define I2C_FLAG_PECERR I2C_ISR_PECERR +#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define I2C_FLAG_ALERT I2C_ISR_ALERT +#define I2C_FLAG_BUSY I2C_ISR_BUSY +#define I2C_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @brief Reset I2C handle state. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2C_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** @brief Enable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified I2C interrupt. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified I2C interrupt source is enabled or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __INTERRUPT__ specifies the I2C interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref I2C_IT_ERRI Errors interrupt enable + * @arg @ref I2C_IT_TCI Transfer complete interrupt enable + * @arg @ref I2C_IT_STOPI STOP detection interrupt enable + * @arg @ref I2C_IT_NACKI NACK received interrupt enable + * @arg @ref I2C_IT_ADDRI Address match interrupt enable + * @arg @ref I2C_IT_RXI RX interrupt enable + * @arg @ref I2C_IT_TXI TX interrupt enable + * + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \ + (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified I2C flag is set or not. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_TXIS Transmit interrupt status + * @arg @ref I2C_FLAG_RXNE Receive data register not empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_TC Transfer complete (master mode) + * @arg @ref I2C_FLAG_TCR Transfer complete reload + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * @arg @ref I2C_FLAG_BUSY Bus busy + * @arg @ref I2C_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define I2C_FLAG_MASK (0x0001FFFFU) +#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \ + (__FLAG__)) == (__FLAG__)) ? SET : RESET) + +/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the I2C Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref I2C_FLAG_TXE Transmit data register empty + * @arg @ref I2C_FLAG_ADDR Address matched (slave mode) + * @arg @ref I2C_FLAG_AF Acknowledge failure received flag + * @arg @ref I2C_FLAG_STOPF STOP detection flag + * @arg @ref I2C_FLAG_BERR Bus error + * @arg @ref I2C_FLAG_ARLO Arbitration lost + * @arg @ref I2C_FLAG_OVR Overrun/Underrun + * @arg @ref I2C_FLAG_PECERR PEC error in reception + * @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref I2C_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified I2C peripheral. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode. + * @param __HANDLE__ specifies the I2C Handle. + * @retval None + */ +#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) +/** + * @} + */ + +/* Include I2C HAL Extended module */ +#include "stm32wl3x_hal_i2c_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +/* Initialization and de-initialization functions******************************/ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* IO operation functions ****************************************************/ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); + +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c); +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress); + +#if defined(HAL_DMA_MODULE_ENABLED) +/******* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +#endif /*HAL_DMA_MODULE_ENABLED*/ +/** + * @} + */ + +/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); +void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @{ + */ +/* Peripheral State, Mode and Error functions *********************************/ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c); +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c); +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c); + +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Constants I2C Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2C_Private_Macro I2C Private Macros + * @{ + */ + +#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \ + ((MODE) == I2C_ADDRESSINGMODE_10BIT)) + +#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) + +#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \ + ((MASK) == I2C_OA2_MASK01) || \ + ((MASK) == I2C_OA2_MASK02) || \ + ((MASK) == I2C_OA2_MASK03) || \ + ((MASK) == I2C_OA2_MASK04) || \ + ((MASK) == I2C_OA2_MASK05) || \ + ((MASK) == I2C_OA2_MASK06) || \ + ((MASK) == I2C_OA2_MASK07)) + +#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ + ((CALL) == I2C_GENERALCALL_ENABLE)) + +#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ + ((STRETCH) == I2C_NOSTRETCH_ENABLE)) + +#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ + ((SIZE) == I2C_MEMADD_SIZE_16BIT)) + +#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \ + ((MODE) == I2C_AUTOEND_MODE) || \ + ((MODE) == I2C_SOFTEND_MODE)) + +#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \ + ((REQUEST) == I2C_GENERATE_START_READ) || \ + ((REQUEST) == I2C_GENERATE_START_WRITE) || \ + ((REQUEST) == I2C_NO_STARTSTOP)) + +#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_FIRST_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \ + ((REQUEST) == I2C_NEXT_FRAME) || \ + ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME) || \ + ((REQUEST) == I2C_LAST_FRAME_NO_STOP) || \ + IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)) + +#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \ + ((REQUEST) == I2C_OTHER_AND_LAST_FRAME)) + +#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \ + >> 16U)) +#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \ + >> 16U)) +#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1)) +#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2)) + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \ + (uint16_t)(0xFF00U))) >> 8U))) +#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU)))) + +#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_ADD10) | (I2C_CR2_START) | \ + (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN))) + +#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \ + ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET) +#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +/* Private functions are defined in stm32wl3x_hal_i2c.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32WL3x_HAL_I2C_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_i2c_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_i2c_ex.h new file mode 100644 index 0000000000..06c8d452ea --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_i2c_ex.h @@ -0,0 +1,164 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_i2c_ex.h + * @author MCD Application Team + * @brief Header file of I2C HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_I2C_EX_H +#define STM32WL3x_HAL_I2C_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup I2CEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants + * @{ + */ + +/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter + * @{ + */ +#define I2C_ANALOGFILTER_ENABLE 0x00000000U +#define I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus + * @{ + */ +#define I2C_FASTMODEPLUS_PA0 SYSCFG_I2C_FMP_CTRL_I2C1_PA0_FMP /*!< Enable Fast Mode Plus on PA0 */ +#define I2C_FASTMODEPLUS_PA1 SYSCFG_I2C_FMP_CTRL_I2C1_PA1_FMP /*!< Enable Fast Mode Plus on PA1 */ +#define I2C_FASTMODEPLUS_PB6 SYSCFG_I2C_FMP_CTRL_I2C1_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define I2C_FASTMODEPLUS_PB7 SYSCFG_I2C_FMP_CTRL_I2C1_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#define I2C_FASTMODEPLUS_PB10 SYSCFG_I2C_FMP_CTRL_I2C1_PB10_FMP /*!< Enable Fast Mode Plus on PB10 */ +#define I2C_FASTMODEPLUS_PB11 SYSCFG_I2C_FMP_CTRL_I2C1_PB11_FMP /*!< Enable Fast Mode Plus on PB11 */ +#define I2C_FASTMODEPLUS_PA6 SYSCFG_I2C_FMP_CTRL_I2C2_PA6_FMP /*!< Enable Fast Mode Plus on PA6 */ +#define I2C_FASTMODEPLUS_PA7 SYSCFG_I2C_FMP_CTRL_I2C2_PA7_FMP /*!< Enable Fast Mode Plus on PA7 */ +#define I2C_FASTMODEPLUS_PA13 SYSCFG_I2C_FMP_CTRL_I2C2_PA13_FMP /*!< Enable Fast Mode Plus on PA13 */ +#define I2C_FASTMODEPLUS_PA14 SYSCFG_I2C_FMP_CTRL_I2C2_PA14_FMP /*!< Enable Fast Mode Plus on PA14 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +/** + * @} + */ + +/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros + * @{ + */ +#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ + ((FILTER) == I2C_ANALOGFILTER_DISABLE)) + +#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (I2C_FASTMODEPLUS_PB6)) == I2C_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB7)) == I2C_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA0)) == I2C_FASTMODEPLUS_PA0) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA1)) == I2C_FASTMODEPLUS_PA1) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB10)) == I2C_FASTMODEPLUS_PB10) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PB11)) == I2C_FASTMODEPLUS_PB11) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA6)) == I2C_FASTMODEPLUS_PA6) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA7)) == I2C_FASTMODEPLUS_PA7) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA13)) == I2C_FASTMODEPLUS_PA13) || \ + (((__CONFIG__) & (I2C_FASTMODEPLUS_PA14)) == I2C_FASTMODEPLUS_PA14)) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32wl3x_hal_i2c_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_I2C_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_i2s.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_i2s.h new file mode 100644 index 0000000000..a46521f3b1 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_i2s.h @@ -0,0 +1,551 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_i2s.h + * @author MCD Application Team + * @brief Header file of I2S HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_I2S_H +#define STM32WL3x_HAL_I2S_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup I2S + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup I2S_Exported_Types I2S Exported Types + * @{ + */ + +/** + * @brief I2S Init structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_Mode */ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_Standard */ + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_Data_Format */ + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_MCLK_Output */ + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_Audio_Frequency */ + + uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_Clock_Polarity */ +} I2S_InitTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */ + HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */ + HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */ + HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */ + HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */ +} HAL_I2S_StateTypeDef; + +/** + * @brief I2S handle Structure definition + */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1) +typedef struct __I2S_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +{ + SPI_TypeDef *Instance; /*!< I2S registers base address */ + + I2S_InitTypeDef Init; /*!< I2S communication parameters */ + + uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */ + + __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */ + + __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */ + + uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */ + + __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */ + + __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */ + + __IO HAL_LockTypeDef Lock; /*!< I2S locking object */ + + __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */ + + __IO uint32_t ErrorCode; /*!< I2S Error code + This parameter can be a value of @ref I2S_Error */ + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */ + void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */ + void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */ + void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */ + void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */ + void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */ + +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} I2S_HandleTypeDef; + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL I2S Callback ID enumeration definition + */ +typedef enum +{ + HAL_I2S_TX_COMPLETE_CB_ID = 0x00U, /*!< I2S Tx Completed callback ID */ + HAL_I2S_RX_COMPLETE_CB_ID = 0x01U, /*!< I2S Rx Completed callback ID */ + HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< I2S Tx Half Completed callback ID */ + HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< I2S Rx Half Completed callback ID */ + HAL_I2S_ERROR_CB_ID = 0x06U, /*!< I2S Error callback ID */ + HAL_I2S_MSPINIT_CB_ID = 0x07U, /*!< I2S Msp Init callback ID */ + HAL_I2S_MSPDEINIT_CB_ID = 0x08U /*!< I2S Msp DeInit callback ID */ + +} HAL_I2S_CallbackIDTypeDef; + +/** + * @brief HAL I2S Callback pointer definition + */ +typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */ + +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_Exported_Constants I2S Exported Constants + * @{ + */ +/** @defgroup I2S_Error I2S Error + * @{ + */ +#define HAL_I2S_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_I2S_ERROR_TIMEOUT (0x00000001U) /*!< Timeout error */ +#define HAL_I2S_ERROR_OVR (0x00000002U) /*!< OVR error */ +#define HAL_I2S_ERROR_UDR (0x00000004U) /*!< UDR error */ +#define HAL_I2S_ERROR_DMA (0x00000008U) /*!< DMA transfer error */ +#define HAL_I2S_ERROR_PRESCALER (0x00000010U) /*!< Prescaler Calculation error */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +#define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000020U) /*!< Invalid Callback error */ +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +#define HAL_I2S_ERROR_BUSY_LINE_RX (0x00000040U) /*!< Busy Rx Line error */ +/** + * @} + */ + +/** @defgroup I2S_Mode I2S Mode + * @{ + */ +#define I2S_MODE_SLAVE_TX (0x00000000U) +#define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) +#define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) +#define I2S_MODE_MASTER_RX ((SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)) +/** + * @} + */ + +/** @defgroup I2S_Standard I2S Standard + * @{ + */ +#define I2S_STANDARD_PHILIPS (0x00000000U) +#define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) +#define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) +#define I2S_STANDARD_PCM_SHORT ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)) +#define I2S_STANDARD_PCM_LONG ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)) +/** + * @} + */ + +/** @defgroup I2S_Data_Format I2S Data Format + * @{ + */ +#define I2S_DATAFORMAT_16B (0x00000000U) +#define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) +#define I2S_DATAFORMAT_24B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0)) +#define I2S_DATAFORMAT_32B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1)) +/** + * @} + */ + +/** @defgroup I2S_MCLK_Output I2S MCLK Output + * @{ + */ +#define I2S_MCLKOUTPUT_ENABLE (SPI_I2SPR_MCKOE) +#define I2S_MCLKOUTPUT_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup I2S_Audio_Frequency I2S Audio Frequency + * @{ + */ +#define I2S_AUDIOFREQ_192K (192000U) +#define I2S_AUDIOFREQ_96K (96000U) +#define I2S_AUDIOFREQ_48K (48000U) +#define I2S_AUDIOFREQ_44K (44100U) +#define I2S_AUDIOFREQ_32K (32000U) +#define I2S_AUDIOFREQ_22K (22050U) +#define I2S_AUDIOFREQ_16K (16000U) +#define I2S_AUDIOFREQ_11K (11025U) +#define I2S_AUDIOFREQ_8K (8000U) +#define I2S_AUDIOFREQ_DEFAULT (2U) +/** + * @} + */ + +/** @defgroup I2S_Clock_Polarity I2S Clock Polarity + * @{ + */ +#define I2S_CPOL_LOW (0x00000000U) +#define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL) +/** + * @} + */ + +/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition + * @{ + */ +#define I2S_IT_TXE SPI_CR2_TXEIE +#define I2S_IT_RXNE SPI_CR2_RXNEIE +#define I2S_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup I2S_Flags_Definition I2S Flags Definition + * @{ + */ +#define I2S_FLAG_TXE SPI_SR_TXE +#define I2S_FLAG_RXNE SPI_SR_RXNE + +#define I2S_FLAG_UDR SPI_SR_UDR +#define I2S_FLAG_OVR SPI_SR_OVR +#define I2S_FLAG_FRE SPI_SR_FRE + +#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE +#define I2S_FLAG_BSY SPI_SR_BSY + +#define I2S_FLAG_MASK (SPI_SR_RXNE\ + | SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_CHSIDE | SPI_SR_BSY) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup I2S_Exported_macros I2S Exported Macros + * @{ + */ + +/** @brief Reset I2S handle state + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_I2S_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + +/** @brief Disable the specified SPI peripheral (in I2S mode). + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + +/** @brief Enable the specified I2S interrupts. + * @param __HANDLE__ specifies the I2S Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) + +/** @brief Disable the specified I2S interrupts. + * @param __HANDLE__ specifies the I2S Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) + +/** @brief Checks if the specified I2S interrupt source is enabled or disabled. + * @param __HANDLE__ specifies the I2S Handle. + * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. + * @param __INTERRUPT__ specifies the I2S interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified I2S flag is set or not. + * @param __HANDLE__ specifies the I2S Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_FRE: Frame error flag + * @arg I2S_FLAG_CHSIDE: Channel Side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the I2S OVR pending flag. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + }while(0U) +/** @brief Clears the I2S UDR pending flag. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\ + __IO uint32_t tmpreg_udr = 0x00U;\ + tmpreg_udr = ((__HANDLE__)->Instance->SR);\ + UNUSED(tmpreg_udr); \ + }while(0U) +/** @brief Flush the I2S DR Register. + * @param __HANDLE__ specifies the I2S Handle. + * @retval None + */ +#define __HAL_I2S_FLUSH_RX_DR(__HANDLE__) do{\ + __IO uint32_t tmpreg_dr = 0x00U;\ + tmpreg_dr = ((__HANDLE__)->Instance->DR);\ + UNUSED(tmpreg_dr); \ + }while(0U) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); +void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, + pI2S_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); + +/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ +void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); +void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** @addtogroup I2S_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s); +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2S_Private_Macros I2S Private Macros + * @{ + */ + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of I2S SR register. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg I2S_FLAG_RXNE: Receive buffer not empty flag + * @arg I2S_FLAG_TXE: Transmit buffer empty flag + * @arg I2S_FLAG_UDR: Underrun error flag + * @arg I2S_FLAG_OVR: Overrun flag + * @arg I2S_FLAG_CHSIDE: Channel side flag + * @arg I2S_FLAG_BSY: Busy flag + * @retval SET or RESET. + */ +#define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__)\ + & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of I2S CR2 register. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg I2S_IT_TXE: Tx buffer empty interrupt enable + * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable + * @arg I2S_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define I2S_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__)\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if I2S Mode parameter is in allowed range. + * @param __MODE__ specifies the I2S Mode. + * This parameter can be a value of @ref I2S_Mode + * @retval None + */ +#define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \ + ((__MODE__) == I2S_MODE_SLAVE_RX) || \ + ((__MODE__) == I2S_MODE_MASTER_TX) || \ + ((__MODE__) == I2S_MODE_MASTER_RX)) + +#define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \ + ((__STANDARD__) == I2S_STANDARD_MSB) || \ + ((__STANDARD__) == I2S_STANDARD_LSB) || \ + ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \ + ((__STANDARD__) == I2S_STANDARD_PCM_LONG)) + +#define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \ + ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \ + ((__FORMAT__) == I2S_DATAFORMAT_24B) || \ + ((__FORMAT__) == I2S_DATAFORMAT_32B)) + +#define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \ + ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE)) + +#define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \ + ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \ + ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT)) + +/** @brief Checks if I2S Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the I2S serial clock steady state. + * This parameter can be a value of @ref I2S_Clock_Polarity + * @retval None + */ +#define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \ + ((__CPOL__) == I2S_CPOL_HIGH)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_I2S_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_irda.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_irda.h new file mode 100644 index 0000000000..945c93a758 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_irda.h @@ -0,0 +1,884 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_irda.h + * @author MCD Application Team + * @brief Header file of IRDA HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_IRDA_H +#define STM32WL3x_HAL_IRDA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup IRDA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Types IRDA Exported Types + * @{ + */ + +/** + * @brief IRDA Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((usart_ker_ckpres) / ((hirda->Init.BaudRate))) + where usart_ker_ckpres is the IRDA input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref IRDAEx_Word_Length */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref IRDA_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref IRDA_Transfer_Mode */ + + uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock + to achieve low-power frequency. + @note Prescaler value 0 is forbidden */ + + uint16_t PowerMode; /*!< Specifies the IRDA power mode. + This parameter can be a value of @ref IRDA_Low_Power */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the IRDA clock source. + This parameter can be a value of @ref IRDA_ClockPrescaler. */ + +} IRDA_InitTypeDef; + +/** + * @brief HAL IRDA State definition + * @note HAL IRDA State value is a combination of 2 different substates: + * gState and RxState (see @ref IRDA_State_Definition). + * - gState contains IRDA state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL IRDA Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_IRDA_StateTypeDef; + +/** + * @brief IRDA handle Structure definition + */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +typedef struct __IRDA_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + IRDA_InitTypeDef Init; /*!< IRDA communication parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< IRDA Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< IRDA Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */ + + uint16_t Mask; /*!< USART RX RDR register mask */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_IRDA_StateTypeDef gState; /*!< IRDA state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO HAL_IRDA_StateTypeDef RxState; /*!< IRDA state information related to Rx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< IRDA Error code */ + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Half Complete Callback */ + + void (* TxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Complete Callback */ + + void (* RxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Half Complete Callback */ + + void (* RxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Complete Callback */ + + void (* ErrorCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Error Callback */ + + void (* AbortCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Complete Callback */ + + void (* AbortTransmitCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Transmit Complete Callback */ + + void (* AbortReceiveCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Receive Complete Callback */ + + + void (* MspInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp Init callback */ + + void (* MspDeInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp DeInit callback */ +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +} IRDA_HandleTypeDef; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief HAL IRDA Callback ID enumeration definition + */ +typedef enum +{ + HAL_IRDA_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< IRDA Tx Half Complete Callback ID */ + HAL_IRDA_TX_COMPLETE_CB_ID = 0x01U, /*!< IRDA Tx Complete Callback ID */ + HAL_IRDA_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< IRDA Rx Half Complete Callback ID */ + HAL_IRDA_RX_COMPLETE_CB_ID = 0x03U, /*!< IRDA Rx Complete Callback ID */ + HAL_IRDA_ERROR_CB_ID = 0x04U, /*!< IRDA Error Callback ID */ + HAL_IRDA_ABORT_COMPLETE_CB_ID = 0x05U, /*!< IRDA Abort Complete Callback ID */ + HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< IRDA Abort Transmit Complete Callback ID */ + HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< IRDA Abort Receive Complete Callback ID */ + + HAL_IRDA_MSPINIT_CB_ID = 0x08U, /*!< IRDA MspInit callback ID */ + HAL_IRDA_MSPDEINIT_CB_ID = 0x09U /*!< IRDA MspDeInit callback ID */ + +} HAL_IRDA_CallbackIDTypeDef; + +/** + * @brief HAL IRDA Callback pointer definition + */ +typedef void (*pIRDA_CallbackTypeDef)(IRDA_HandleTypeDef *hirda); /*!< pointer to an IRDA callback function */ + +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Constants IRDA Exported Constants + * @{ + */ + +/** @defgroup IRDA_State_Definition IRDA State Code Definition + * @{ + */ +#define HAL_IRDA_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_IRDA_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_IRDA_STATE_BUSY 0x00000024U /*!< An internal process is ongoing + Value is allowed for gState only */ +#define HAL_IRDA_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_IRDA_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_IRDA_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState. + Value is result of combination (Or) between + gState and RxState values */ +#define HAL_IRDA_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_IRDA_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup IRDA_Error_Definition IRDA Error Code Definition + * @{ + */ +#define HAL_IRDA_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_IRDA_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_IRDA_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_IRDA_ERROR_FE (0x00000004U) /*!< frame error */ +#define HAL_IRDA_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define HAL_IRDA_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#endif /* HAL_DMA_MODULE_ENABLED */ +#define HAL_IRDA_ERROR_BUSY (0x00000020U) /*!< Busy Error */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +#define HAL_IRDA_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup IRDA_Parity IRDA Parity + * @{ + */ +#define IRDA_PARITY_NONE 0x00000000U /*!< No parity */ +#define IRDA_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define IRDA_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode + * @{ + */ +#define IRDA_MODE_RX USART_CR1_RE /*!< RX mode */ +#define IRDA_MODE_TX USART_CR1_TE /*!< TX mode */ +#define IRDA_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup IRDA_Low_Power IRDA Low Power + * @{ + */ +#define IRDA_POWERMODE_NORMAL 0x00000000U /*!< IRDA normal power mode */ +#define IRDA_POWERMODE_LOWPOWER USART_CR3_IRLP /*!< IRDA low power mode */ +/** + * @} + */ + +/** @defgroup IRDA_ClockPrescaler IRDA Clock Prescaler + * @{ + */ +#define IRDA_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define IRDA_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define IRDA_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define IRDA_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define IRDA_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define IRDA_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define IRDA_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define IRDA_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define IRDA_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define IRDA_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define IRDA_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define IRDA_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup IRDA_State IRDA State + * @{ + */ +#define IRDA_STATE_DISABLE 0x00000000U /*!< IRDA disabled */ +#define IRDA_STATE_ENABLE USART_CR1_UE /*!< IRDA enabled */ +/** + * @} + */ + +/** @defgroup IRDA_Mode IRDA Mode + * @{ + */ +#define IRDA_MODE_DISABLE 0x00000000U /*!< Associated UART disabled in IRDA mode */ +#define IRDA_MODE_ENABLE USART_CR3_IREN /*!< Associated UART enabled in IRDA mode */ +/** + * @} + */ + +/** @defgroup IRDA_One_Bit IRDA One Bit Sampling + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disabled */ +#define IRDA_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enabled */ +/** + * @} + */ + +/** @defgroup IRDA_DMA_Tx IRDA DMA Tx + * @{ + */ +#define IRDA_DMA_TX_DISABLE 0x00000000U /*!< IRDA DMA TX disabled */ +#define IRDA_DMA_TX_ENABLE USART_CR3_DMAT /*!< IRDA DMA TX enabled */ +/** + * @} + */ + +/** @defgroup IRDA_DMA_Rx IRDA DMA Rx + * @{ + */ +#define IRDA_DMA_RX_DISABLE 0x00000000U /*!< IRDA DMA RX disabled */ +#define IRDA_DMA_RX_ENABLE USART_CR3_DMAR /*!< IRDA DMA RX enabled */ +/** + * @} + */ + +/** @defgroup IRDA_Request_Parameters IRDA Request Parameters + * @{ + */ +#define IRDA_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define IRDA_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define IRDA_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup IRDA_Flags IRDA Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define IRDA_FLAG_REACK USART_ISR_REACK /*!< IRDA receive enable acknowledge flag */ +#define IRDA_FLAG_TEACK USART_ISR_TEACK /*!< IRDA transmit enable acknowledge flag */ +#define IRDA_FLAG_BUSY USART_ISR_BUSY /*!< IRDA busy flag */ +#define IRDA_FLAG_ABRF USART_ISR_ABRF /*!< IRDA auto Baud rate flag */ +#define IRDA_FLAG_ABRE USART_ISR_ABRE /*!< IRDA auto Baud rate error */ +#define IRDA_FLAG_TXE USART_ISR_TXE_TXFNF /*!< IRDA transmit data register empty */ +#define IRDA_FLAG_TC USART_ISR_TC /*!< IRDA transmission complete */ +#define IRDA_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< IRDA read data register not empty */ +#define IRDA_FLAG_ORE USART_ISR_ORE /*!< IRDA overrun error */ +#define IRDA_FLAG_NE USART_ISR_NE /*!< IRDA noise error */ +#define IRDA_FLAG_FE USART_ISR_FE /*!< IRDA frame error */ +#define IRDA_FLAG_PE USART_ISR_PE /*!< IRDA parity error */ +/** + * @} + */ + +/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define IRDA_IT_PE 0x0028U /*!< IRDA Parity error interruption */ +#define IRDA_IT_TXE 0x0727U /*!< IRDA Transmit data register empty interruption */ +#define IRDA_IT_TC 0x0626U /*!< IRDA Transmission complete interruption */ +#define IRDA_IT_RXNE 0x0525U /*!< IRDA Read data register not empty interruption */ +#define IRDA_IT_IDLE 0x0424U /*!< IRDA Idle interruption */ + +/* Elements values convention: 000000000XXYYYYYb + - YYYYY : Interrupt source position in the XX register (5bits) + - XX : Interrupt source register (2bits) + - 01: CR1 register + - 10: CR2 register + - 11: CR3 register */ +#define IRDA_IT_ERR 0x0060U /*!< IRDA Error interruption */ + +/* Elements values convention: 0000ZZZZ00000000b + - ZZZZ : Flag position in the ISR register(4bits) */ +#define IRDA_IT_ORE 0x0300U /*!< IRDA Overrun error interruption */ +#define IRDA_IT_NE 0x0200U /*!< IRDA Noise error interruption */ +#define IRDA_IT_FE 0x0100U /*!< IRDA Frame error interruption */ +/** + * @} + */ + +/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags + * @{ + */ +#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define IRDA_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define IRDA_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +/** + * @} + */ + +/** @defgroup IRDA_Interruption_Mask IRDA interruptions flags mask + * @{ + */ +#define IRDA_IT_MASK 0x001FU /*!< IRDA Interruptions flags mask */ +#define IRDA_CR_MASK 0x00E0U /*!< IRDA control register mask */ +#define IRDA_CR_POS 5U /*!< IRDA control register position */ +#define IRDA_ISR_MASK 0x1F00U /*!< IRDA ISR register mask */ +#define IRDA_ISR_POS 8U /*!< IRDA ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Macros IRDA Exported Macros + * @{ + */ + +/** @brief Reset IRDA handle state. + * @param __HANDLE__ IRDA handle. + * @retval None + */ +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** @brief Flush the IRDA DR register. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified IRDA pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref IRDA_CLEAR_PEF + * @arg @ref IRDA_CLEAR_FEF + * @arg @ref IRDA_CLEAR_NEF + * @arg @ref IRDA_CLEAR_OREF + * @arg @ref IRDA_CLEAR_TCF + * @arg @ref IRDA_CLEAR_IDLEF + * @retval None + */ +#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the IRDA PE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF) + + +/** @brief Clear the IRDA FE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF) + +/** @brief Clear the IRDA NE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF) + +/** @brief Clear the IRDA ORE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF) + +/** @brief Clear the IRDA IDLE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF) + +/** @brief Check whether the specified IRDA flag is set or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_FLAG_REACK Receive enable acknowledge flag + * @arg @ref IRDA_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref IRDA_FLAG_BUSY Busy flag + * @arg @ref IRDA_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref IRDA_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref IRDA_FLAG_TXE Transmit data register empty flag + * @arg @ref IRDA_FLAG_TC Transmission Complete flag + * @arg @ref IRDA_FLAG_RXNE Receive data register not empty flag + * @arg @ref IRDA_FLAG_ORE OverRun Error flag + * @arg @ref IRDA_FLAG_NE Noise Error flag + * @arg @ref IRDA_FLAG_FE Framing Error flag + * @arg @ref IRDA_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + + +/** @brief Enable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? \ + ((__HANDLE__)->Instance->CR1 |= (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))):\ + ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? \ + ((__HANDLE__)->Instance->CR2 |= (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))):\ + ((__HANDLE__)->Instance->CR3 |= (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK)))) + +/** @brief Disable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? \ + ((__HANDLE__)->Instance->CR1 &= ~ (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? \ + ((__HANDLE__)->Instance->CR2 &= ~ (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U << \ + ((__INTERRUPT__) & IRDA_IT_MASK)))) + +/** @brief Check whether the specified IRDA interrupt has occurred or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_ORE OverRun Error interrupt + * @arg @ref IRDA_IT_NE Noise Error interrupt + * @arg @ref IRDA_IT_FE Framing Error interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_IRDA_GET_IT(__HANDLE__, __INTERRUPT__) \ + ((((__HANDLE__)->Instance->ISR& (0x01U << (((__INTERRUPT__) & IRDA_ISR_MASK)>>IRDA_ISR_POS))) != 0U) ? SET : RESET) + +/** @brief Check whether the specified IRDA interrupt source is enabled or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_ERR Framing, overrun or noise error interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + ((((((((__INTERRUPT__) & IRDA_CR_MASK) >>IRDA_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 :(((((__INTERRUPT__) \ + & IRDA_CR_MASK) >> IRDA_CR_POS)== 0x02U)? (__HANDLE__)->Instance->CR2 :(__HANDLE__)->Instance->CR3)) \ + & (0x01U <<(((uint16_t)(__INTERRUPT__)) & IRDA_IT_MASK))) != 0U) ? SET : RESET) + +/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref IRDA_CLEAR_PEF Parity Error Clear Flag + * @arg @ref IRDA_CLEAR_FEF Framing Error Clear Flag + * @arg @ref IRDA_CLEAR_NEF Noise detected Clear Flag + * @arg @ref IRDA_CLEAR_OREF OverRun Error Clear Flag + * @arg @ref IRDA_CLEAR_TCF Transmission Complete Clear Flag + * @retval None + */ +#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + + +/** @brief Set a specific IRDA request flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref IRDA_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref IRDA_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref IRDA_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the IRDA one bit sample method. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the IRDA one bit sample method. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ + &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) + +/** @brief Enable UART/USART associated to IRDA Handle. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART/USART associated to IRDA Handle. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @addtogroup IRDA_Private_Macros + * @{ + */ + +/** @brief Ensure that IRDA Baud rate is less or equal to maximum value. + * @param __BAUDRATE__ specifies the IRDA Baudrate set by the user. + * @retval True or False + */ +#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201U) + +/** @brief Ensure that IRDA prescaler value is strictly larger than 0. + * @param __PRESCALER__ specifies the IRDA prescaler value set by the user. + * @retval True or False + */ +#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0U) + +/** @brief Ensure that IRDA frame parity is valid. + * @param __PARITY__ IRDA frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \ + ((__PARITY__) == IRDA_PARITY_EVEN) || \ + ((__PARITY__) == IRDA_PARITY_ODD)) + +/** @brief Ensure that IRDA communication mode is valid. + * @param __MODE__ IRDA communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__)\ + & (~((uint32_t)(IRDA_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** @brief Ensure that IRDA power mode is valid. + * @param __MODE__ IRDA power mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \ + ((__MODE__) == IRDA_POWERMODE_NORMAL)) + +/** @brief Ensure that IRDA clock Prescaler is valid. + * @param __CLOCKPRESCALER__ IRDA clock Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_IRDA_CLOCKPRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV256)) + +/** @brief Ensure that IRDA state is valid. + * @param __STATE__ IRDA state mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \ + ((__STATE__) == IRDA_STATE_ENABLE)) + +/** @brief Ensure that IRDA associated UART/USART mode is valid. + * @param __MODE__ IRDA associated UART/USART mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_MODE(__MODE__) (((__MODE__) == IRDA_MODE_DISABLE) || \ + ((__MODE__) == IRDA_MODE_ENABLE)) + +/** @brief Ensure that IRDA sampling rate is valid. + * @param __ONEBIT__ IRDA sampling rate. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE)) + +/** @brief Ensure that IRDA DMA TX mode is valid. + * @param __DMATX__ IRDA DMA TX mode. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_IRDA_DMA_TX(__DMATX__) (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \ + ((__DMATX__) == IRDA_DMA_TX_ENABLE)) + +/** @brief Ensure that IRDA DMA RX mode is valid. + * @param __DMARX__ IRDA DMA RX mode. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \ + ((__DMARX__) == IRDA_DMA_RX_ENABLE)) + +/** @brief Ensure that IRDA request is valid. + * @param __PARAM__ IRDA request. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_IRDA_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == IRDA_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == IRDA_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == IRDA_TXDATA_FLUSH_REQUEST)) +/** + * @} + */ + +/* Include IRDA HAL Extended module */ +#include "stm32wl3x_hal_irda_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, + pIRDA_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); +#endif /* HAL_DMA_MODULE_ENABLED */ +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda); + +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ + +/** @addtogroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(const IRDA_HandleTypeDef *hirda); +uint32_t HAL_IRDA_GetError(const IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_IRDA_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_irda_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_irda_ex.h new file mode 100644 index 0000000000..d2caa94bd4 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_irda_ex.h @@ -0,0 +1,143 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_irda_ex.h + * @author MCD Application Team + * @brief Header file of IRDA HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_IRDA_EX_H +#define STM32WL3x_HAL_IRDA_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup IRDAEx IRDAEx + * @brief IRDA Extended HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDAEx_Extended_Exported_Constants IRDAEx Extended Exported Constants + * @{ + */ + +/** @defgroup IRDAEx_Word_Length IRDAEx Word Length + * @{ + */ +#define IRDA_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long frame */ +#define IRDA_WORDLENGTH_8B 0x00000000U /*!< 8-bit long frame */ +#define IRDA_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long frame */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup IRDAEx_Private_Macros IRDAEx Private Macros + * @{ + */ + +/* An always 16 MHz is requested by USART to maintain fixed baud rate while + * system clock is switching from a frequency to another) + */ +#define IRDA_PERIPHCLK (16000000U) + +/** @brief Compute the mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None, the mask to apply to the associated UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define IRDA_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** @brief Ensure that IRDA frame length is valid. + * @param __LENGTH__ IRDA frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_IRDA_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == IRDA_WORDLENGTH_7B) || \ + ((__LENGTH__) == IRDA_WORDLENGTH_8B) || \ + ((__LENGTH__) == IRDA_WORDLENGTH_9B)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_IRDA_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_iwdg.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_iwdg.h new file mode 100644 index 0000000000..072e144fc8 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_iwdg.h @@ -0,0 +1,237 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_iwdg.h + * @author MCD Application Team + * @brief Header file of IWDG HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_IWDG_H +#define STM32WL3x_HAL_IWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup IWDG IWDG + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Types IWDG Exported Types + * @{ + */ + +/** + * @brief IWDG Init structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Select the prescaler of the IWDG. + This parameter can be a value of @ref IWDG_Prescaler */ + + uint32_t Reload; /*!< Specifies the IWDG down-counter reload value. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ + + uint32_t Window; /*!< Specifies the window value to be compared to the down-counter. + This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ + +} IWDG_InitTypeDef; + +/** + * @brief IWDG Handle Structure definition + */ +typedef struct +{ + IWDG_TypeDef *Instance; /*!< Register base address */ + + IWDG_InitTypeDef Init; /*!< IWDG required parameters */ +} IWDG_HandleTypeDef; + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Constants IWDG Exported Constants + * @{ + */ + +/** @defgroup IWDG_Prescaler IWDG Prescaler + * @{ + */ +#define IWDG_PRESCALER_4 0x00000000u /*!< IWDG prescaler set to 4 */ +#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */ +#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */ +#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */ +#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */ +#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */ +#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */ +/** + * @} + */ + +/** @defgroup IWDG_Window_option IWDG Window option + * @{ + */ +#define IWDG_WINDOW_DISABLE IWDG_WINR_WIN +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Macros IWDG Exported Macros + * @{ + */ + +/** + * @brief Enable the IWDG peripheral. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE) + +/** + * @brief Reload IWDG counter with value defined in the reload register + * (write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers disabled). + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup IWDG_Exported_Functions IWDG Exported Functions + * @{ + */ + +/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions + * @{ + */ +/* Initialization/Start functions ********************************************/ +HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg); +/** + * @} + */ + +/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions + * @{ + */ +/* I/O operation functions ****************************************************/ +HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IWDG_Private_Constants IWDG Private Constants + * @{ + */ + +/** + * @brief IWDG Key Register BitMask + */ +#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */ +#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */ +#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */ +#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000u /*!< IWDG KR Write Access Disable */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup IWDG_Private_Macros IWDG Private Macros + * @{ + */ + +/** + * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE) + +/** + * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers. + * @param __HANDLE__ IWDG handle + * @retval None + */ +#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE) + +/** + * @brief Check IWDG prescaler value. + * @param __PRESCALER__ IWDG prescaler value + * @retval None + */ +#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \ + ((__PRESCALER__) == IWDG_PRESCALER_8) || \ + ((__PRESCALER__) == IWDG_PRESCALER_16) || \ + ((__PRESCALER__) == IWDG_PRESCALER_32) || \ + ((__PRESCALER__) == IWDG_PRESCALER_64) || \ + ((__PRESCALER__) == IWDG_PRESCALER_128)|| \ + ((__PRESCALER__) == IWDG_PRESCALER_256)) + +/** + * @brief Check IWDG reload value. + * @param __RELOAD__ IWDG reload value + * @retval None + */ +#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL) + +/** + * @brief Check IWDG window value. + * @param __WINDOW__ IWDG window value + * @retval None + */ +#define IS_IWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= IWDG_WINR_WIN) + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_IWDG_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_lcd.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_lcd.h new file mode 100644 index 0000000000..8451f21447 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_lcd.h @@ -0,0 +1,776 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_lcd.h + * @author MCD Application Team + * @brief Header file of LCD Controller HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32WL3x_HAL_LCD_H +#define __STM32WL3x_HAL_LCD_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +#if defined (LCD) + +/** @addtogroup LCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup LCD_Exported_Types LCD Exported Types + * @{ + */ + +/** + * @brief LCD Init structure definition + */ + +typedef struct +{ + uint32_t Prescaler; /*!< Configures the LCD Prescaler. + This parameter can be one value of @ref LCD_Prescaler */ + uint32_t Divider; /*!< Configures the LCD Divider. + This parameter can be one value of @ref LCD_Divider */ + uint32_t Duty; /*!< Configures the LCD Duty. + This parameter can be one value of @ref LCD_Duty */ + uint32_t Bias; /*!< Configures the LCD Bias. + This parameter can be one value of @ref LCD_Bias */ + uint32_t VoltageSource; /*!< Selects the LCD Voltage source. + This parameter can be one value of @ref LCD_Voltage_Source */ + uint32_t Contrast; /*!< Configures the LCD Contrast. + This parameter can be one value of @ref LCD_Contrast */ + uint32_t DeadTime; /*!< Configures the LCD Dead Time. + This parameter can be one value of @ref LCD_DeadTime */ + uint32_t PulseOnDuration; /*!< Configures the LCD Pulse On Duration. + This parameter can be one value of @ref LCD_PulseOnDuration */ + uint32_t HighDrive; /*!< Enable or disable the low resistance divider. + This parameter can be one value of @ref LCD_HighDrive */ + uint32_t BlinkMode; /*!< Configures the LCD Blink Mode. + This parameter can be one value of @ref LCD_BlinkMode */ + uint32_t BlinkFrequency; /*!< Configures the LCD Blink frequency. + This parameter can be one value of @ref LCD_BlinkFrequency */ +} LCD_InitTypeDef; + +/** + * @brief HAL LCD State structures definition + */ +typedef enum +{ + HAL_LCD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ + HAL_LCD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ + HAL_LCD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ + HAL_LCD_STATE_TIMEOUT = 0x03, /*!< Timeout state */ + HAL_LCD_STATE_ERROR = 0x04 /*!< Error */ +} HAL_LCD_StateTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct +{ + LCD_TypeDef *Instance; /* LCD registers base address */ + + LCD_InitTypeDef Init; /* LCD communication parameters */ + + HAL_LockTypeDef Lock; /* Locking object */ + + __IO HAL_LCD_StateTypeDef State; /* LCD communication state */ + + __IO uint32_t ErrorCode; /* LCD Error code */ + +} LCD_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LCD_Exported_Constants LCD Exported Constants + * @{ + */ + +/** @defgroup LCD_ErrorCode LCD Error Code + * @{ + */ +#define HAL_LCD_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_LCD_ERROR_FCRSF (0x00000001U) /*!< Synchro flag timeout error */ +#define HAL_LCD_ERROR_UDR (0x00000002U) /*!< Update display request flag timeout error */ +#define HAL_LCD_ERROR_UDD (0x00000004U) /*!< Update display done flag timeout error */ +#define HAL_LCD_ERROR_ENS (0x00000008U) /*!< LCD enabled status flag timeout error */ +#define HAL_LCD_ERROR_RDY (0x00000010U) /*!< LCD Booster ready timeout error */ +/** + * @} + */ + +/** @defgroup LCD_Prescaler LCD Prescaler + * @{ + */ +#define LCD_PRESCALER_1 (0x00000000U) /*!< CLKPS = LCDCLK */ +#define LCD_PRESCALER_2 (0x00400000U) /*!< CLKPS = LCDCLK/2 */ +#define LCD_PRESCALER_4 (0x00800000U) /*!< CLKPS = LCDCLK/4 */ +#define LCD_PRESCALER_8 (0x00C00000U) /*!< CLKPS = LCDCLK/8 */ +#define LCD_PRESCALER_16 (0x01000000U) /*!< CLKPS = LCDCLK/16 */ +#define LCD_PRESCALER_32 (0x01400000U) /*!< CLKPS = LCDCLK/32 */ +#define LCD_PRESCALER_64 (0x01800000U) /*!< CLKPS = LCDCLK/64 */ +#define LCD_PRESCALER_128 (0x01C00000U) /*!< CLKPS = LCDCLK/128 */ +#define LCD_PRESCALER_256 (0x02000000U) /*!< CLKPS = LCDCLK/256 */ +#define LCD_PRESCALER_512 (0x02400000U) /*!< CLKPS = LCDCLK/512 */ +#define LCD_PRESCALER_1024 (0x02800000U) /*!< CLKPS = LCDCLK/1024 */ +#define LCD_PRESCALER_2048 (0x02C00000U) /*!< CLKPS = LCDCLK/2048 */ +#define LCD_PRESCALER_4096 (0x03000000U) /*!< CLKPS = LCDCLK/4096 */ +#define LCD_PRESCALER_8192 (0x03400000U) /*!< CLKPS = LCDCLK/8192 */ +#define LCD_PRESCALER_16384 (0x03800000U) /*!< CLKPS = LCDCLK/16384 */ +#define LCD_PRESCALER_32768 (0x03C00000U) /*!< CLKPS = LCDCLK/32768 */ +/** + * @} + */ + +/** @defgroup LCD_Divider LCD Divider + * @{ + */ +#define LCD_DIVIDER_16 (0x00000000U) /*!< LCD frequency = CLKPS/16 */ +#define LCD_DIVIDER_17 (0x00040000U) /*!< LCD frequency = CLKPS/17 */ +#define LCD_DIVIDER_18 (0x00080000U) /*!< LCD frequency = CLKPS/18 */ +#define LCD_DIVIDER_19 (0x000C0000U) /*!< LCD frequency = CLKPS/19 */ +#define LCD_DIVIDER_20 (0x00100000U) /*!< LCD frequency = CLKPS/20 */ +#define LCD_DIVIDER_21 (0x00140000U) /*!< LCD frequency = CLKPS/21 */ +#define LCD_DIVIDER_22 (0x00180000U) /*!< LCD frequency = CLKPS/22 */ +#define LCD_DIVIDER_23 (0x001C0000U) /*!< LCD frequency = CLKPS/23 */ +#define LCD_DIVIDER_24 (0x00200000U) /*!< LCD frequency = CLKPS/24 */ +#define LCD_DIVIDER_25 (0x00240000U) /*!< LCD frequency = CLKPS/25 */ +#define LCD_DIVIDER_26 (0x00280000U) /*!< LCD frequency = CLKPS/26 */ +#define LCD_DIVIDER_27 (0x002C0000U) /*!< LCD frequency = CLKPS/27 */ +#define LCD_DIVIDER_28 (0x00300000U) /*!< LCD frequency = CLKPS/28 */ +#define LCD_DIVIDER_29 (0x00340000U) /*!< LCD frequency = CLKPS/29 */ +#define LCD_DIVIDER_30 (0x00380000U) /*!< LCD frequency = CLKPS/30 */ +#define LCD_DIVIDER_31 (0x003C0000U) /*!< LCD frequency = CLKPS/31 */ +/** + * @} + */ + + +/** @defgroup LCD_Duty LCD Duty + * @{ + */ +#define LCD_DUTY_STATIC (0x00000000U) /*!< Static duty */ +#define LCD_DUTY_1_2 (LCD_CR_DUTY_0) /*!< 1/2 duty */ +#define LCD_DUTY_1_3 (LCD_CR_DUTY_1) /*!< 1/3 duty */ +#define LCD_DUTY_1_4 ((LCD_CR_DUTY_1 | LCD_CR_DUTY_0)) /*!< 1/4 duty */ +#define LCD_DUTY_1_8 (LCD_CR_DUTY_2) /*!< 1/8 duty */ +/** + * @} + */ + + +/** @defgroup LCD_Bias LCD Bias + * @{ + */ +#define LCD_BIAS_1_4 (0x00000000U) /*!< 1/4 Bias */ +#define LCD_BIAS_1_2 LCD_CR_BIAS_0 /*!< 1/2 Bias */ +#define LCD_BIAS_1_3 LCD_CR_BIAS_1 /*!< 1/3 Bias */ +/** + * @} + */ + +/** @defgroup LCD_Voltage_Source LCD Voltage Source + * @{ + */ +#define LCD_VOLTAGESOURCE_INTERNAL (0x00000000U) /*!< Internal voltage source for the LCD */ +#define LCD_VOLTAGESOURCE_EXTERNAL LCD_CR_VSEL /*!< External voltage source for the LCD */ +/** + * @} + */ + +/** @defgroup LCD_Interrupts LCD Interrupts + * @{ + */ +#define LCD_IT_SOF LCD_FCR_SOFIE +#define LCD_IT_UDD LCD_FCR_UDDIE +/** + * @} + */ + +/** @defgroup LCD_PulseOnDuration LCD Pulse On Duration + * @{ + */ +#define LCD_PULSEONDURATION_0 (0x00000000U) /*!< Pulse ON duration = 0 pulse */ +#define LCD_PULSEONDURATION_1 (LCD_FCR_PON_0) /*!< Pulse ON duration = 1/CK_PS */ +#define LCD_PULSEONDURATION_2 (LCD_FCR_PON_1) /*!< Pulse ON duration = 2/CK_PS */ +#define LCD_PULSEONDURATION_3 (LCD_FCR_PON_1 | LCD_FCR_PON_0) /*!< Pulse ON duration = 3/CK_PS */ +#define LCD_PULSEONDURATION_4 (LCD_FCR_PON_2) /*!< Pulse ON duration = 4/CK_PS */ +#define LCD_PULSEONDURATION_5 (LCD_FCR_PON_2 | LCD_FCR_PON_0) /*!< Pulse ON duration = 5/CK_PS */ +#define LCD_PULSEONDURATION_6 (LCD_FCR_PON_2 | LCD_FCR_PON_1) /*!< Pulse ON duration = 6/CK_PS */ +#define LCD_PULSEONDURATION_7 (LCD_FCR_PON) /*!< Pulse ON duration = 7/CK_PS */ +/** + * @} + */ + + +/** @defgroup LCD_DeadTime LCD Dead Time + * @{ + */ +#define LCD_DEADTIME_0 (0x00000000U) /*!< No dead Time */ +#define LCD_DEADTIME_1 (LCD_FCR_DEAD_0) /*!< One Phase between different couple of Frame */ +#define LCD_DEADTIME_2 (LCD_FCR_DEAD_1) /*!< Two Phase between different couple of Frame */ +#define LCD_DEADTIME_3 (LCD_FCR_DEAD_1 | LCD_FCR_DEAD_0) /*!< Three Phase between different couple of Frame */ +#define LCD_DEADTIME_4 (LCD_FCR_DEAD_2) /*!< Four Phase between different couple of Frame */ +#define LCD_DEADTIME_5 (LCD_FCR_DEAD_2 | LCD_FCR_DEAD_0) /*!< Five Phase between different couple of Frame */ +#define LCD_DEADTIME_6 (LCD_FCR_DEAD_2 | LCD_FCR_DEAD_1) /*!< Six Phase between different couple of Frame */ +#define LCD_DEADTIME_7 (LCD_FCR_DEAD) /*!< Seven Phase between different couple of Frame */ +/** + * @} + */ + +/** @defgroup LCD_BlinkMode LCD Blink Mode + * @{ + */ +#define LCD_BLINKMODE_OFF (0x00000000U) /*!< Blink disabled */ +#define LCD_BLINKMODE_SEG0_COM0 (LCD_FCR_BLINK_0) /*!< Blink enabled on SEG[0], COM[0] (1 pixel) */ +#define LCD_BLINKMODE_SEG0_ALLCOM (LCD_FCR_BLINK_1) /*!< Blink enabled on SEG[0], all COM (up to + 8 pixels according to the programmed duty) */ +#define LCD_BLINKMODE_ALLSEG_ALLCOM (LCD_FCR_BLINK) /*!< Blink enabled on all SEG and all COM (all pixels) */ +/** + * @} + */ + +/** @defgroup LCD_BlinkFrequency LCD Blink Frequency + * @{ + */ +#define LCD_BLINKFREQUENCY_DIV8 (0x00000000U) /*!< The Blink frequency = fLCD/8 */ +#define LCD_BLINKFREQUENCY_DIV16 (LCD_FCR_BLINKF_0) /*!< The Blink frequency = fLCD/16 */ +#define LCD_BLINKFREQUENCY_DIV32 (LCD_FCR_BLINKF_1) /*!< The Blink frequency = fLCD/32 */ +#define LCD_BLINKFREQUENCY_DIV64 (LCD_FCR_BLINKF_1 | LCD_FCR_BLINKF_0) /*!< The Blink frequency = fLCD/64 */ +#define LCD_BLINKFREQUENCY_DIV128 (LCD_FCR_BLINKF_2) /*!< The Blink frequency = fLCD/128 */ +#define LCD_BLINKFREQUENCY_DIV256 (LCD_FCR_BLINKF_2 |LCD_FCR_BLINKF_0) /*!< The Blink frequency = fLCD/256 */ +#define LCD_BLINKFREQUENCY_DIV512 (LCD_FCR_BLINKF_2 |LCD_FCR_BLINKF_1) /*!< The Blink frequency = fLCD/512 */ +#define LCD_BLINKFREQUENCY_DIV1024 (LCD_FCR_BLINKF) /*!< The Blink frequency = fLCD/1024 */ +/** + * @} + */ + +/** @defgroup LCD_Contrast LCD Contrast + * @{ + */ +#define LCD_CONTRASTLEVEL_0 (0x00000000U) /*!< Maximum Voltage = 2.60V */ +#define LCD_CONTRASTLEVEL_1 (LCD_FCR_CC_0) /*!< Maximum Voltage = 2.73V */ +#define LCD_CONTRASTLEVEL_2 (LCD_FCR_CC_1) /*!< Maximum Voltage = 2.86V */ +#define LCD_CONTRASTLEVEL_3 (LCD_FCR_CC_1 | LCD_FCR_CC_0) /*!< Maximum Voltage = 2.99V */ +#define LCD_CONTRASTLEVEL_4 (LCD_FCR_CC_2) /*!< Maximum Voltage = 3.12V */ +#define LCD_CONTRASTLEVEL_5 (LCD_FCR_CC_2 | LCD_FCR_CC_0) /*!< Maximum Voltage = 3.26V */ +#define LCD_CONTRASTLEVEL_6 (LCD_FCR_CC_2 | LCD_FCR_CC_1) /*!< Maximum Voltage = 3.40V */ +#define LCD_CONTRASTLEVEL_7 (LCD_FCR_CC) /*!< Maximum Voltage = 3.55V */ +/** + * @} + */ + +/** @defgroup LCD_RAMRegister LCD RAMRegister + * @{ + */ +#define LCD_RAM_REGISTER0 (0x00000000U) /*!< LCD RAM Register 0 */ +#define LCD_RAM_REGISTER1 (0x00000001U) /*!< LCD RAM Register 1 */ +#define LCD_RAM_REGISTER2 (0x00000002U) /*!< LCD RAM Register 2 */ +#define LCD_RAM_REGISTER3 (0x00000003U) /*!< LCD RAM Register 3 */ +#define LCD_RAM_REGISTER4 (0x00000004U) /*!< LCD RAM Register 4 */ +#define LCD_RAM_REGISTER5 (0x00000005U) /*!< LCD RAM Register 5 */ +#define LCD_RAM_REGISTER6 (0x00000006U) /*!< LCD RAM Register 6 */ +#define LCD_RAM_REGISTER7 (0x00000007U) /*!< LCD RAM Register 7 */ +#define LCD_RAM_REGISTER8 (0x00000008U) /*!< LCD RAM Register 8 */ +#define LCD_RAM_REGISTER9 (0x00000009U) /*!< LCD RAM Register 9 */ +#define LCD_RAM_REGISTER10 (0x0000000AU) /*!< LCD RAM Register 10 */ +#define LCD_RAM_REGISTER11 (0x0000000BU) /*!< LCD RAM Register 11 */ +#define LCD_RAM_REGISTER12 (0x0000000CU) /*!< LCD RAM Register 12 */ +#define LCD_RAM_REGISTER13 (0x0000000DU) /*!< LCD RAM Register 13 */ +#define LCD_RAM_REGISTER14 (0x0000000EU) /*!< LCD RAM Register 14 */ +#define LCD_RAM_REGISTER15 (0x0000000FU) /*!< LCD RAM Register 15 */ +/** + * @} + */ + +/** @defgroup LCD_HighDrive LCD High Drive + * @{ + */ + +#define LCD_HIGHDRIVE_DISABLE ((uint32_t)0x00000000) /*!< High drive disabled */ +#define LCD_HIGHDRIVE_ENABLE (LCD_FCR_HD) /*!< High drive enabled */ +/** + * @} + */ + +/** @defgroup LCD_Flag_Definition LCD Flags Definition + * @{ + */ +#define LCD_FLAG_ENS LCD_SR_ENS /*!< LCD enabled status */ +#define LCD_FLAG_SOF LCD_SR_SOF /*!< Start of frame flag */ +#define LCD_FLAG_UDR LCD_SR_UDR /*!< Update display request */ +#define LCD_FLAG_UDD LCD_SR_UDD /*!< Update display done */ +#define LCD_FLAG_RDY LCD_SR_RDY /*!< Ready flag */ +#define LCD_FLAG_FCRSF LCD_SR_FCRSF /*!< LCD Frame Control Register Synchronization flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup LCD_Exported_Macros LCD Exported Macros + * @{ + */ + +/** @brief Reset LCD handle state. + * @param __HANDLE__ specifies the LCD Handle. + * @retval None + */ +#define __HAL_LCD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LCD_STATE_RESET) + +/** @brief Enable the LCD peripheral. + * @param __HANDLE__ specifies the LCD Handle. + * @retval None + */ +#define __HAL_LCD_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, LCD_CR_LCDEN) + +/** @brief Disable the LCD peripheral. + * @param __HANDLE__ specifies the LCD Handle. + * @retval None + */ +#define __HAL_LCD_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, LCD_CR_LCDEN) + +/** @brief Enable the low resistance divider. + * @param __HANDLE__ specifies the LCD Handle. + * @note Displays with high internal resistance may need a longer drive time to + * achieve satisfactory contrast. This function is useful in this case if + * some additional power consumption can be tolerated. + * @note When this mode is enabled, the PulseOn Duration (PON) have to be + * programmed to 1/CK_PS (LCD_PULSEONDURATION_1). + * @retval None + */ +#define __HAL_LCD_HIGHDRIVER_ENABLE(__HANDLE__) \ + do { \ + SET_BIT((__HANDLE__)->Instance->FCR, LCD_FCR_HD); \ + LCD_WaitForSynchro(__HANDLE__); \ + } while(0) + +/** @brief Disable the low resistance divider. + * @param __HANDLE__ specifies the LCD Handle. + * @retval None + */ +#define __HAL_LCD_HIGHDRIVER_DISABLE(__HANDLE__) \ + do { \ + CLEAR_BIT((__HANDLE__)->Instance->FCR, LCD_FCR_HD); \ + LCD_WaitForSynchro(__HANDLE__); \ + } while(0) + +/** @brief Enable the voltage output buffer for higher driving capability. + * @param __HANDLE__ specifies the LCD Handle. + * @retval None + */ +#define __HAL_LCD_VOLTAGE_BUFFER_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, LCD_CR_BUFEN) + +/** @brief Disable the voltage output buffer for higher driving capability. + * @param __HANDLE__ specifies the LCD Handle. + * @retval None + */ +#define __HAL_LCD_VOLTAGE_BUFFER_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, LCD_CR_BUFEN) + +/** + * @brief Configure the LCD pulse on duration. + * @param __HANDLE__ specifies the LCD Handle. + * @param __DURATION__ specifies the LCD pulse on duration in terms of + * CK_PS (prescaled LCD clock period) pulses. + * This parameter can be one of the following values: + * @arg LCD_PULSEONDURATION_0: 0 pulse + * @arg LCD_PULSEONDURATION_1: Pulse ON duration = 1/CK_PS + * @arg LCD_PULSEONDURATION_2: Pulse ON duration = 2/CK_PS + * @arg LCD_PULSEONDURATION_3: Pulse ON duration = 3/CK_PS + * @arg LCD_PULSEONDURATION_4: Pulse ON duration = 4/CK_PS + * @arg LCD_PULSEONDURATION_5: Pulse ON duration = 5/CK_PS + * @arg LCD_PULSEONDURATION_6: Pulse ON duration = 6/CK_PS + * @arg LCD_PULSEONDURATION_7: Pulse ON duration = 7/CK_PS + * @retval None + */ +#define __HAL_LCD_PULSEONDURATION_CONFIG(__HANDLE__, __DURATION__) \ + do { \ + MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_PON, (__DURATION__)); \ + LCD_WaitForSynchro(__HANDLE__); \ + } while(0) + +/** + * @brief Configure the LCD dead time. + * @param __HANDLE__ specifies the LCD Handle. + * @param __DEADTIME__ specifies the LCD dead time. + * This parameter can be one of the following values: + * @arg LCD_DEADTIME_0: No dead Time + * @arg LCD_DEADTIME_1: One Phase between different couple of Frame + * @arg LCD_DEADTIME_2: Two Phase between different couple of Frame + * @arg LCD_DEADTIME_3: Three Phase between different couple of Frame + * @arg LCD_DEADTIME_4: Four Phase between different couple of Frame + * @arg LCD_DEADTIME_5: Five Phase between different couple of Frame + * @arg LCD_DEADTIME_6: Six Phase between different couple of Frame + * @arg LCD_DEADTIME_7: Seven Phase between different couple of Frame + * @retval None + */ +#define __HAL_LCD_DEADTIME_CONFIG(__HANDLE__, __DEADTIME__) \ + do { \ + MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_DEAD, (__DEADTIME__)); \ + LCD_WaitForSynchro(__HANDLE__); \ + } while(0) + +/** + * @brief Configure the LCD contrast. + * @param __HANDLE__ specifies the LCD Handle. + * @param __CONTRAST__ specifies the LCD Contrast. + * This parameter can be one of the following values: + * @arg LCD_CONTRASTLEVEL_0: Maximum Voltage = 2.60V + * @arg LCD_CONTRASTLEVEL_1: Maximum Voltage = 2.73V + * @arg LCD_CONTRASTLEVEL_2: Maximum Voltage = 2.86V + * @arg LCD_CONTRASTLEVEL_3: Maximum Voltage = 2.99V + * @arg LCD_CONTRASTLEVEL_4: Maximum Voltage = 3.12V + * @arg LCD_CONTRASTLEVEL_5: Maximum Voltage = 3.25V + * @arg LCD_CONTRASTLEVEL_6: Maximum Voltage = 3.38V + * @arg LCD_CONTRASTLEVEL_7: Maximum Voltage = 3.51V + * @retval None + */ +#define __HAL_LCD_CONTRAST_CONFIG(__HANDLE__, __CONTRAST__) \ + do { \ + MODIFY_REG((__HANDLE__)->Instance->FCR, LCD_FCR_CC, (__CONTRAST__)); \ + LCD_WaitForSynchro(__HANDLE__); \ + } while(0) + +/** + * @brief Configure the LCD Blink mode and Blink frequency. + * @param __HANDLE__ specifies the LCD Handle. + * @param __BLINKMODE__ specifies the LCD blink mode. + * This parameter can be one of the following values: + * @arg LCD_BLINKMODE_OFF: Blink disabled + * @arg LCD_BLINKMODE_SEG0_COM0: Blink enabled on SEG[0], COM[0] (1 pixel) + * @arg LCD_BLINKMODE_SEG0_ALLCOM: Blink enabled on SEG[0], all COM (up to 8 + * pixels according to the programmed duty) + * @arg LCD_BLINKMODE_ALLSEG_ALLCOM: Blink enabled on all SEG and all COM + * (all pixels) + * @param __BLINKFREQUENCY__ specifies the LCD blink frequency. + * @arg LCD_BLINKFREQUENCY_DIV8: The Blink frequency = fLcd/8 + * @arg LCD_BLINKFREQUENCY_DIV16: The Blink frequency = fLcd/16 + * @arg LCD_BLINKFREQUENCY_DIV32: The Blink frequency = fLcd/32 + * @arg LCD_BLINKFREQUENCY_DIV64: The Blink frequency = fLcd/64 + * @arg LCD_BLINKFREQUENCY_DIV128: The Blink frequency = fLcd/128 + * @arg LCD_BLINKFREQUENCY_DIV256: The Blink frequency = fLcd/256 + * @arg LCD_BLINKFREQUENCY_DIV512: The Blink frequency = fLcd/512 + * @arg LCD_BLINKFREQUENCY_DIV1024: The Blink frequency = fLcd/1024 + * @retval None + */ +#define __HAL_LCD_BLINK_CONFIG(__HANDLE__, __BLINKMODE__, __BLINKFREQUENCY__) \ + do { \ + MODIFY_REG((__HANDLE__)->Instance->FCR, (LCD_FCR_BLINKF | LCD_FCR_BLINK), ((__BLINKMODE__) | (__BLINKFREQUENCY__))); \ + LCD_WaitForSynchro(__HANDLE__); \ + } while(0) + +/** @brief Enable the specified LCD interrupt. + * @param __HANDLE__ specifies the LCD Handle. + * @param __INTERRUPT__ specifies the LCD interrupt source to be enabled. + * This parameter can be one of the following values: + * @arg LCD_IT_SOF: Start of Frame Interrupt + * @arg LCD_IT_UDD: Update Display Done Interrupt + * @retval None + */ +#define __HAL_LCD_ENABLE_IT(__HANDLE__, __INTERRUPT__) \ + do { \ + SET_BIT((__HANDLE__)->Instance->FCR, (__INTERRUPT__)); \ + LCD_WaitForSynchro(__HANDLE__); \ + } while(0) + +/** @brief Disable the specified LCD interrupt. + * @param __HANDLE__ specifies the LCD Handle. + * @param __INTERRUPT__ specifies the LCD interrupt source to be disabled. + * This parameter can be one of the following values: + * @arg LCD_IT_SOF: Start of Frame Interrupt + * @arg LCD_IT_UDD: Update Display Done Interrupt + * @retval None + */ +#define __HAL_LCD_DISABLE_IT(__HANDLE__, __INTERRUPT__) \ + do { \ + CLEAR_BIT((__HANDLE__)->Instance->FCR, (__INTERRUPT__)); \ + LCD_WaitForSynchro(__HANDLE__); \ + } while(0) + +/** @brief Check whether the specified LCD interrupt source is enabled or not. + * @param __HANDLE__ specifies the LCD Handle. + * @param __IT__ specifies the LCD interrupt source to check. + * This parameter can be one of the following values: + * @arg LCD_IT_SOF: Start of Frame Interrupt + * @arg LCD_IT_UDD: Update Display Done Interrupt. + * @note If the device is in STOP mode (PCLK not provided) UDD will not + * generate an interrupt even if UDDIE = 1. + * If the display is not enabled the UDD interrupt will never occur. + * @retval The state of __IT__ (TRUE or FALSE). + */ +#define __HAL_LCD_GET_IT_SOURCE(__HANDLE__, __IT__) (((__HANDLE__)->Instance->FCR) & (__IT__)) + +/** @brief Check whether the specified LCD flag is set or not. + * @param __HANDLE__ specifies the LCD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg LCD_FLAG_ENS: LCD Enabled flag. It indicates the LCD controller status. + * @note The ENS bit is set immediately when the LCDEN bit in the LCD_CR + * goes from 0 to 1. On deactivation it reflects the real status of + * LCD so it becomes 0 at the end of the last displayed frame. + * @arg LCD_FLAG_SOF: Start of Frame flag. This flag is set by hardware at + * the beginning of a new frame, at the same time as the display data is + * updated. + * @arg LCD_FLAG_UDR: Update Display Request flag. + * @arg LCD_FLAG_UDD: Update Display Done flag. + * @arg LCD_FLAG_RDY: Step_up converter Ready flag. It indicates the status + * of the step-up converter. + * @arg LCD_FLAG_FCRSF: LCD Frame Control Register Synchronization Flag. + * This flag is set by hardware each time the LCD_FCR register is updated + * in the LCDCLK domain. + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_LCD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified LCD pending flag. + * @param __HANDLE__ specifies the LCD Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg LCD_FLAG_SOF: Start of Frame Interrupt + * @arg LCD_FLAG_UDD: Update Display Done Interrupt + * @retval None + */ +#define __HAL_LCD_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->CLR, (__FLAG__)) + +/** + * @} + */ + +/* Exported functions ------------------------------------------------------- */ +/** @addtogroup LCD_Exported_Functions + * @{ + */ + +/* Initialization/de-initialization methods **********************************/ +/** @addtogroup LCD_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_LCD_DeInit(LCD_HandleTypeDef *hlcd); +HAL_StatusTypeDef HAL_LCD_Init(LCD_HandleTypeDef *hlcd); +void HAL_LCD_MspInit(LCD_HandleTypeDef *hlcd); +void HAL_LCD_MspDeInit(LCD_HandleTypeDef *hlcd); +/** + * @} + */ + +/* IO operation methods *******************************************************/ +/** @addtogroup LCD_Exported_Functions_Group2 + * @{ + */ +HAL_StatusTypeDef HAL_LCD_Write(LCD_HandleTypeDef *hlcd, uint32_t RAMRegisterIndex, uint32_t RAMRegisterMask, uint32_t Data); +HAL_StatusTypeDef HAL_LCD_Clear(LCD_HandleTypeDef *hlcd); +HAL_StatusTypeDef HAL_LCD_UpdateDisplayRequest(LCD_HandleTypeDef *hlcd); +/** + * @} + */ + +/* Peripheral State methods **************************************************/ +/** @addtogroup LCD_Exported_Functions_Group3 + * @{ + */ +HAL_LCD_StateTypeDef HAL_LCD_GetState(LCD_HandleTypeDef *hlcd); +uint32_t HAL_LCD_GetError(LCD_HandleTypeDef *hlcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup LCD_Private_Macros LCD Private Macros + * @{ + */ + +#define IS_LCD_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LCD_PRESCALER_1) || \ + ((__PRESCALER__) == LCD_PRESCALER_2) || \ + ((__PRESCALER__) == LCD_PRESCALER_4) || \ + ((__PRESCALER__) == LCD_PRESCALER_8) || \ + ((__PRESCALER__) == LCD_PRESCALER_16) || \ + ((__PRESCALER__) == LCD_PRESCALER_32) || \ + ((__PRESCALER__) == LCD_PRESCALER_64) || \ + ((__PRESCALER__) == LCD_PRESCALER_128) || \ + ((__PRESCALER__) == LCD_PRESCALER_256) || \ + ((__PRESCALER__) == LCD_PRESCALER_512) || \ + ((__PRESCALER__) == LCD_PRESCALER_1024) || \ + ((__PRESCALER__) == LCD_PRESCALER_2048) || \ + ((__PRESCALER__) == LCD_PRESCALER_4096) || \ + ((__PRESCALER__) == LCD_PRESCALER_8192) || \ + ((__PRESCALER__) == LCD_PRESCALER_16384) || \ + ((__PRESCALER__) == LCD_PRESCALER_32768)) + +#define IS_LCD_DIVIDER(__DIVIDER__) (((__DIVIDER__) == LCD_DIVIDER_16) || \ + ((__DIVIDER__) == LCD_DIVIDER_17) || \ + ((__DIVIDER__) == LCD_DIVIDER_18) || \ + ((__DIVIDER__) == LCD_DIVIDER_19) || \ + ((__DIVIDER__) == LCD_DIVIDER_20) || \ + ((__DIVIDER__) == LCD_DIVIDER_21) || \ + ((__DIVIDER__) == LCD_DIVIDER_22) || \ + ((__DIVIDER__) == LCD_DIVIDER_23) || \ + ((__DIVIDER__) == LCD_DIVIDER_24) || \ + ((__DIVIDER__) == LCD_DIVIDER_25) || \ + ((__DIVIDER__) == LCD_DIVIDER_26) || \ + ((__DIVIDER__) == LCD_DIVIDER_27) || \ + ((__DIVIDER__) == LCD_DIVIDER_28) || \ + ((__DIVIDER__) == LCD_DIVIDER_29) || \ + ((__DIVIDER__) == LCD_DIVIDER_30) || \ + ((__DIVIDER__) == LCD_DIVIDER_31)) + +#define IS_LCD_DUTY(__DUTY__) (((__DUTY__) == LCD_DUTY_STATIC) || \ + ((__DUTY__) == LCD_DUTY_1_2) || \ + ((__DUTY__) == LCD_DUTY_1_3) || \ + ((__DUTY__) == LCD_DUTY_1_4) || \ + ((__DUTY__) == LCD_DUTY_1_8)) + +#define IS_LCD_BIAS(__BIAS__) (((__BIAS__) == LCD_BIAS_1_4) || \ + ((__BIAS__) == LCD_BIAS_1_2) || \ + ((__BIAS__) == LCD_BIAS_1_3)) + +#define IS_LCD_VOLTAGE_SOURCE(SOURCE) (((SOURCE) == LCD_VOLTAGESOURCE_INTERNAL) || \ + ((SOURCE) == LCD_VOLTAGESOURCE_EXTERNAL)) + + +#define IS_LCD_PULSE_ON_DURATION(__DURATION__) (((__DURATION__) == LCD_PULSEONDURATION_0) || \ + ((__DURATION__) == LCD_PULSEONDURATION_1) || \ + ((__DURATION__) == LCD_PULSEONDURATION_2) || \ + ((__DURATION__) == LCD_PULSEONDURATION_3) || \ + ((__DURATION__) == LCD_PULSEONDURATION_4) || \ + ((__DURATION__) == LCD_PULSEONDURATION_5) || \ + ((__DURATION__) == LCD_PULSEONDURATION_6) || \ + ((__DURATION__) == LCD_PULSEONDURATION_7)) + +#define IS_LCD_DEAD_TIME(__TIME__) (((__TIME__) == LCD_DEADTIME_0) || \ + ((__TIME__) == LCD_DEADTIME_1) || \ + ((__TIME__) == LCD_DEADTIME_2) || \ + ((__TIME__) == LCD_DEADTIME_3) || \ + ((__TIME__) == LCD_DEADTIME_4) || \ + ((__TIME__) == LCD_DEADTIME_5) || \ + ((__TIME__) == LCD_DEADTIME_6) || \ + ((__TIME__) == LCD_DEADTIME_7)) + +#define IS_LCD_BLINK_MODE(__MODE__) (((__MODE__) == LCD_BLINKMODE_OFF) || \ + ((__MODE__) == LCD_BLINKMODE_SEG0_COM0) || \ + ((__MODE__) == LCD_BLINKMODE_SEG0_ALLCOM) || \ + ((__MODE__) == LCD_BLINKMODE_ALLSEG_ALLCOM)) + +#define IS_LCD_BLINK_FREQUENCY(__FREQUENCY__) (((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV8) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV16) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV32) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV64) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV128) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV256) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV512) || \ + ((__FREQUENCY__) == LCD_BLINKFREQUENCY_DIV1024)) + +#define IS_LCD_CONTRAST(__CONTRAST__) (((__CONTRAST__) == LCD_CONTRASTLEVEL_0) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_1) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_2) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_3) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_4) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_5) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_6) || \ + ((__CONTRAST__) == LCD_CONTRASTLEVEL_7)) + +#define IS_LCD_RAM_REGISTER(__REGISTER__) (((__REGISTER__) == LCD_RAM_REGISTER0) || \ + ((__REGISTER__) == LCD_RAM_REGISTER1) || \ + ((__REGISTER__) == LCD_RAM_REGISTER2) || \ + ((__REGISTER__) == LCD_RAM_REGISTER3) || \ + ((__REGISTER__) == LCD_RAM_REGISTER4) || \ + ((__REGISTER__) == LCD_RAM_REGISTER5) || \ + ((__REGISTER__) == LCD_RAM_REGISTER6) || \ + ((__REGISTER__) == LCD_RAM_REGISTER7) || \ + ((__REGISTER__) == LCD_RAM_REGISTER8) || \ + ((__REGISTER__) == LCD_RAM_REGISTER9) || \ + ((__REGISTER__) == LCD_RAM_REGISTER10) || \ + ((__REGISTER__) == LCD_RAM_REGISTER11) || \ + ((__REGISTER__) == LCD_RAM_REGISTER12) || \ + ((__REGISTER__) == LCD_RAM_REGISTER13) || \ + ((__REGISTER__) == LCD_RAM_REGISTER14) || \ + ((__REGISTER__) == LCD_RAM_REGISTER15)) + +#define IS_LCD_HIGH_DRIVE(__VALUE__) (((__VALUE__) == LCD_HIGHDRIVE_DISABLE) || \ + ((__VALUE__) == LCD_HIGHDRIVE_ENABLE)) + +#define IS_LCD_MUX_SEGMENT(__VALUE__) (((__VALUE__) == LCD_MUXSEGMENT_ENABLE) || \ + ((__VALUE__) == LCD_MUXSEGMENT_DISABLE)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup LCD_Private_Functions + * @{ + */ + +HAL_StatusTypeDef LCD_WaitForSynchro(LCD_HandleTypeDef *hlcd); + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LCD */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32WL3x_HAL_LCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_lpawur.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_lpawur.h new file mode 100644 index 0000000000..3cb6b2cb9d --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_lpawur.h @@ -0,0 +1,191 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_lpawur.h + * @author MCD Application Team + * @brief Header file of LPAWUR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + + /* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_LPAWUR_H +#define STM32WL3x_HAL_LPAWUR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_lpawur.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup LPAWUR + * @{ + */ + +/** @defgroup LPAWUR_Exported_Macros LPAWUR Exported Macros + * @{ + */ + +/** + * @brief Set the frame sync configuration for LPAWUR. + * @param __VAL__ Value to be set for the frame sync configuration. + */ +#define __HAL_LPAWUR_SET_FRAME_SYNC_CONFIG(__VAL__) WRITE_REG(LPAWUR->FRAME_SYNC_CONFIG, __VAL__); + + /** + * @} + */ + + +/** @defgroup LPAWUR_Exported_Types LPAWUR Exported Types + * @{ + */ + +/** + * @brief STM32WL3 LPAWUR IRQ enumeration + */ +typedef enum { + IRQ_BIT_SYNC_DETECTED = 0x00, /*!< Enables interrupt on BIT_SYNC_DETECTED_F flag */ + IRQ_FRAME_SYNC_COMPLETE = 0x01, /*!< Enables interrupt on FRAME_SYNC_COMPLETE_F flag */ + IRQ_FRAME_COMPLETE = 0x02, /*!< Enables interrupt on FRAME_COMPLETE_F flag */ + IRQ_FRAME_VALID = 0x03 /*!< Enables interrupt on FRAME_VALID_F flag */ +} LPAWUR_IrqEnable; + +/** + * @brief STM32WL3 LPAWUR STATUS enumeration + */ +typedef enum { + BIT_SYNC_DETECTED_F = 0x00, /*!< Preamble (= bit sync) has been detected, the content of the PAYLOAD_X registers is not yet valid */ + FRAME_SYNC_COMPLETE_F = 0x01, /*!< Frame Sync has been detected, the content of the PAYLOAD_X registers is not yet valid */ + FRAME_COMPLETE_F = 0x02, /*!< Frame (payload + CRC) received, the content of the PAYLOAD_X registers is valid */ + FRAME_VALID_F = 0x03, /*!< Frame (payload + CRC) received without error (the CRC has been checked and is matching with the received CRC) */ + NO_STATUS = 0x04 /*!< Frame (payload + CRC) received without error (the CRC has been checked and is matching with the received CRC) */ +} LPAWUR_Status; + +/** + * @brief STM32WL3 LPAWUR Frame Init structure definition + */ +typedef struct { + TrecLoopAlgo TRecAlgoSel; /*!< Timing recovery loop algorithm selection */ + uint8_t SlowClkCyclePerBitCnt; /*!< The number of expected slow clock cycle per each manchester coded bit (default 16) */ + uint8_t PayloadLength; /*!< The number of data Bytes in the payload (decoded). + Only the values 1 (8bits) to 8 (64bits) included are supported, other values are not supported + and shall not be used. + Default value is 7 bytes / 56 bits */ + uint8_t SyncThr; /*!< Detection threshold when receiving the Frame sync (Manchester encoded). The frame sync + detection uses a correlator to detect the address. + - If FRAME_CONFIG0.SYNC_LENGTH=0, recommended threshold is 16 (0x10) + - If FRAME_CONFIG0.SYNC_LENGTH=1, recommended threshold is 32 (0x20) + Default value is 16 (0x10) */ + uint8_t SyncLength; /*!< Frame sync pattern length: + - If the input signal sync_len=0 (default), a 8-bits frame sync is used, the Low word + (FRAME_CONFIG1.FRAME_SYNC_PATTERN_L) is describing the frame sync pattern + value (16 bits after encoding) + - If the input signal sync_len=1, a 16-bits frame sync is used, both Low + (FRAME_SYNC_CONFIG.FRAME_SYNC_PATTERN_L) and High + (FRAME_SYNC_CONFIG.FRAME_SYNC_PATTERN_H) words are storing the pattern + value (32 bits after encoding) */ + uint8_t PreambleThrCnt; /*!< The number of transitions for preamble detection when receiving the Manchester encoded + preamble. Default value is 18 (0x12)*/ + FunctionalState PreambleEnable; /*!< Preamble detection enable. + - If PREAMBLE_ENABLE = 1 (default value) the sync detection starts after the preamble found, + - If PREAMBLE_ENABLE = 0, the sync detection starts when the LPAWUR_rx is enabled*/ + uint8_t FrameSyncCntTimeout; /*!< The timeout in Manchester encoded bits for the Frame Sync. + It represents the number of samples after which a sync_error is raised if the frame sync is not detected. + The default value is 70 (0x46)*/ + uint16_t FrameSyncPattenHigh; /*!< The value of the frame sync pattern, High word, Manchester encoded, used only when the + frame sync length is 32 bits (default 0x0000)*/ + uint16_t FrameSyncPatternLow; /*!< The value of the frame sync pattern, Low word, Manchester encoded, used both when the + frame sync length is 16 bits and 32 bits (default 0x9696 which represent a frame sync value of 0x99)*/ + uint8_t KpGain; /*!< kp gain value for the timing recovery loop */ + uint8_t KiGain; /*!< ki gain value for the timing recovery loop. */ + +}SLPAWUR_FrameInit; + +/** + * @brief STM32WL3 LPAWUR RF Config structure definition + */ +typedef struct { + EdIcal EnergyDetectorIcal; /*!< Current versus VBAT calibration for ED*/ + uint8_t ClockDivider; /*!< Calibrate the 4kHz clock (programmable divider)*/ + FunctionalState EnergyDetectorSwitch; /*!< Energy Detector as input switch (test mode) deactivated by default*/ + AgcResetMode AgcResetMode; /*!< The AGC reset behavior when the AGC is working in ON or HOLD mode + 0x0: reset the AGC after the complete frame detection (default) + 0x1: the AGC is never reset */ + AgcHoldType AgcHoldMode; /*!< The behavior when the AGC is ON and is working in HOLD mode + 0x0: hold after the preamble detection (default) + 0x1: hold after the sync detection */ + AgcMode AgcMode; /*!< Define the working mode of the AGC: + 0x0: AGC MAX (default value) : the AGC is ON and is always operating at maximum value + 0x1: AGC OFF: the AGC is OFF + 0x2: AGC ON : the AGC is ON + 0x3: AGC HOLD: the AGC is ON and its value is frozen during the LPAWUR frame detection, + depending of the AGC_HOLD_MODE configuration after a preamble or after the frame sync. */ + AgcHighLevel AgcHiLvl; /*!< Define the AGC level (High) */ + FunctionalState DCCurrentSubtraction; /*!< DC current subtraction enabling signal */ + AgcLowLevel AgcLoLvl; /*!< Define the AGC level (Low) */ +}SLPAWUR_RFConfig; + +/** + * @brief STM32WL3 LPAWUR RF version structure definition + */ +typedef struct { + uint8_t revision; /*!< Revision of the RFIP (to be used for metal fixes)*/ + uint8_t version; /*!< Version of the RFIP (to be used for cut upgrades)*/ + uint8_t product; /*!< Used for major upgrades (new protocols support / new features)*/ +} SLPAWUR_Version; + +/** + * @} + */ + +/** @defgroup LPAWUR_Exported_Functions LPAWUR Exported Functions + * @{ + */ +void HAL_LPAWUR_IRQ_Callback(void); +void HAL_LPAWUR_IRQHandler(void); + +void HAL_LPAWUR_RFConfigInit(SLPAWUR_RFConfig* pxSLPAWUR_RFConfigStruct); +SLPAWUR_RFConfig HAL_LPAWUR_GetRFConfig(void); +void HAL_LPAWUR_FrameInit(SLPAWUR_FrameInit* pxSLPAWUR_FrameInitStruct); +SLPAWUR_FrameInit HAL_LPAWUR_GetFrameInfo(void); +void HAL_LPAWUR_IrqConfig(LPAWUR_IrqEnable IrqEnable); +LPAWUR_Status HAL_LPAWUR_GetStatus(void); +void HAL_LPAWUR_ClearStatus(void); +void HAL_LPAWUR_SetSync(uint32_t sync); +uint32_t HAL_LPAWUR_GetSync(void); +void HAL_LPAWUR_GetPayload(uint8_t* buff); +SLPAWUR_Version HAL_LPAWUR_GetVersion(void); +void HAL_LPAWUR_MspInit(void); +void HAL_LPAWUR_MspDeInit(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_LPAWUR_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_mrsubg.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_mrsubg.h new file mode 100644 index 0000000000..0d5652f46d --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_mrsubg.h @@ -0,0 +1,475 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_mrsubg.h + * @author GPM Application Team + * @brief Header file of MRSubG HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + + /* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_MRSUBG_H +#define STM32WL3x_HAL_MRSUBG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_mrsubg.h" +#include "stm32wl3x_hal_pwr.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup MRSUBG + * @{ + */ + +/** @defgroup MRSUBG_Private_Constants MRSUBG Private Constants + * @{ + */ +#define GAIN_RX_CHAIN 64 + +#define WMBUS_PREAMBLE_LEN_S1S2LONGHEADER (uint16_t)279 +#define WMBUS_PREAMBLE_LEN_S1MS2T2OTHERTOMETER (uint16_t)15 +#define WMBUS_PREAMBLE_LEN_T1T2METERTOOTHER (uint16_t)19 +#define WMBUS_PREAMBLE_LEN_R2 (uint16_t)39 +#define WMBUS_PREAMBLE_LEN_N1N2 (uint16_t)8 + +#define WMBUS_SYNC_LEN_S1S2LONGHEADER (uint8_t)17 +#define WMBUS_SYNC_LEN_S1MS2T2OTHERTOMETER (uint8_t)17 +#define WMBUS_SYNC_LEN_T1T2METERTOOTHER (uint8_t)9 +#define WMBUS_SYNC_LEN_R2 (uint8_t)17 +#define WMBUS_SYNC_LEN_N1N2 (uint16_t)15 + +#define WMBUS_SYNCWORD_S1S2LONGHEADER (uint32_t)0x1DA58000 +#define WMBUS_SYNCWORD_S1MS2T2OTHERTOMETER (uint32_t)0x1DA58000 +#define WMBUS_SYNCWORD_T1T2METERTOOTHER (uint32_t)0x0F400000 +#define WMBUS_SYNCWORD_R2 (uint32_t)0x1DA58000 +#define WMBUS_SYNCWORD_N1N2 (uint32_t)0xF68D0000 + +/** + * @} + */ + + +/* Exported macros -----------------------------------------------------------*/ + + +/** @defgroup MRSUBG_Exported_Macros MRSUBG Exported Macros + * @{ + */ + +/** + * @brief Send a specific command to the STM32WL3. + * @param __CMD_NAME__ code of the command to send. + * @retval None. + */ +#define __HAL_MRSUBG_STROBE_CMD(__CMD_NAME__) LL_MRSubG_StrobeCommand(__CMD_NAME__) + +/** + * @brief Sets the RX_MODE for the MRSUBG. + * @param __MODE__ the rx mode + * This parameter can be any of the following values: + * @arg @ref RX_NORMAL Only payload is stored into the RAM buffers. CRC and packet length are readable in dedicated status registers + * @arg @ref RX_DIRECT_BUFFERS Full bit stream is stored into the RAM buffers. + * @arg @ref RX_DIRECT_GPIO Full bit stream is provided serially through the RX DATA GPIO. + * @arg @ref RX_IQ_SAMPLING Raw I/Q sampling taken at the output of the Channel filter inside the demodulator are stored in RAM. + * @arg @ref RX_FREQDETEC_SAMPLING Raw data taken at the output of the frequency detector inside the demodulator (detection of the instantaneous frequency changes) are stored in RAM. + * @arg @ref RX_SOFTBIT_SAMPLING Raw data taken at the output of the post-filter inside the demodulator (soft bits before the 0/1 detection) are stored in RAM. + * @retval None. + */ +#define __HAL_MRSUBG_SET_RX_MODE(__MODE__) LL_MRSubG_SetRXMode(__MODE__) + +/** + * @brief Sets the TX_MODE for the MRSUBG. + * @param __MODE__ the tx mode + * This parameter can be any of the following values: + * @arg @ref TX_NORMAL Only payload is provided through RAM buffers Rest of the frame built from configuration registers (PREAMBLE, SYNC, CRC...). + * @arg @ref TX_DIRECT_BUFFERS Full bit stream (including PREAMBLE, SYNC, CRC...) to be provided through RAM buffers. + * @arg @ref TX_DIRECT_GPIO Full bit stream (including PREAMBLE, SYNC, CRC...) to be provided serially through the TX DATA GPIO. + * @arg @ref TX_PN Internal PN generator send a polynomial bit stream on the antenna. + * @retval None. + */ +#define __HAL_MRSUBG_SET_TX_MODE(__MODE__) LL_MRSubG_SetTXMode(__MODE__) + +/** + * @brief Set the PCKTLEN field of the PCKTLEN_CONFIG register. + * @param __P_LEN__ payload length in bytes. + * @retval None. + */ +#define __HAL_MRSUBG_SET_PKT_LEN(__P_LEN__) LL_MRSUBG_SetPacketLength(__P_LEN__) + +/** + * @brief Set global configuration table for sequencer hardware. + * @param __ARG__ Pointer to the global configuration table struct. + * @retval None. + */ +#define __HAL_MRSUBG_SEQ_SET_GLOBAL_CONFIG(__ARG__) LL_MRSubG_Sequencer_SetGlobalConfiguration(__ARG__) + +/** + * @brief Trigger sequencer, i.e., launch sequence of actions. + * @retval None. + */ +#define __HAL_MRSUBG_SEQ_TRIGGER() LL_MRSubG_Sequencer_Trigger() + +/** + * @brief Set the size for the data buffer. + * @param __SIZE__ the size of the data buffer. + * @retval None. + */ +#define __HAL_MRSUBG_SET_DATABUFFER_SIZE(__SIZE__) MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->DATABUFFER_SIZE, MR_SUBG_GLOB_STATIC_DATABUFFER_SIZE_DATABUFFER_SIZE, __SIZE__) + +/** + * @brief Get the size of the data buffer. + * @retval The size of the data buffer. + */ +#define __HAL_MRSUBG_GET_DATABUFFER_SIZE() READ_REG(MR_SUBG_GLOB_STATIC->DATABUFFER_SIZE) + +/** + * @brief Get the number of bytes used in the last used DATA BUFFER. + * @retval The number of bytes used in the last used DATA BUFFER. + */ +#define __HAL_MRSUBG_GET_DATABUFFER_COUNT() READ_REG_FIELD(MR_SUBG_GLOB_STATUS->DATABUFFER_INFO, MR_SUBG_GLOB_STATUS_DATABUFFER_INFO_CURRENT_DATABUFFER_COUNT); + +/** + * @brief Set the pointer for data buffer 0. + * @param __ARG__ Pointer to be set for data buffer 0. + * @retval None. + */ +#define __HAL_MRSUBG_SET_DATABUFFER0_POINTER(__ARG__) WRITE_REG(MR_SUBG_GLOB_STATIC->DATABUFFER0_PTR, __ARG__) + +/** + * @brief Set the pointer for data buffer 1. + * @param __ARG__ Pointer to be set for data buffer 1. + * @retval None. + */ +#define __HAL_MRSUBG_SET_DATABUFFER1_POINTER(__ARG__) WRITE_REG(MR_SUBG_GLOB_STATIC->DATABUFFER1_PTR, __ARG__) + +/** + * @brief Get the RX indicator status. + * @retval The RX indicator status. + */ +#define __HAL_MRSUBG_GET_RX_INDICATOR() READ_REG(MR_SUBG_GLOB_STATUS->RX_INDICATOR) + +/** + * @brief Enable RF sequence IRQ with a given flag. + * @param __FLAG__ Flag to enable RF sequence IRQ. + * @retval None. + */ +#define __HAL_MRSUBG_SET_RFSEQ_IRQ_ENABLE(__FLAG__) WRITE_REG(MR_SUBG_GLOB_DYNAMIC->RFSEQ_IRQ_ENABLE, __FLAG__) + +/** + * @brief Get the RF sequence IRQ status. + * @retval The RF sequence IRQ status. + */ +#define __HAL_MRSUBG_GET_RFSEQ_IRQ_STATUS() READ_REG(MR_SUBG_GLOB_STATUS->RFSEQ_IRQ_STATUS) + +/** + * @brief Clear the RF sequence IRQ flag with a given flag. + * @param __FLAG__ Flag to clear RF sequence IRQ. + * @retval None. + */ +#define __HAL_MRSUBG_CLEAR_RFSEQ_IRQ_FLAG(__FLAG__) WRITE_REG(MR_SUBG_GLOB_STATUS->RFSEQ_IRQ_STATUS, __FLAG__) + +/** + * @brief Get detailed RF sequence status. + * @retval The detailed RF sequence status. + */ +#define __HAL_MRSUBG_GET_RFSEQ_STATUS_DETAIL() READ_REG(MR_SUBG_GLOB_STATUS->RFSEQ_STATUS_DETAIL) + +/** + * @brief Set detailed RF sequence status with a given argument. + * @param __ARG__ Argument to set detailed RF sequence status. + * @retval None. + */ +#define __HAL_MRSUBG_SET_RFSEQ_STATUS_DETAIL(__ARG__) WRITE_REG(MR_SUBG_GLOB_STATUS->RFSEQ_STATUS_DETAIL, __ARG__) + +/** + * @brief Set the RX timeout with a given timeout value. + * @param __TIMEOUT__ Timeout value to set for RX. + * @retval None. + */ +#define __HAL_MRSUBG_SET_RX_TIMEOUT(__TIMEOUT__) MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_TIMEOUT, __TIMEOUT__) + +/** + * @brief Set the fast RX timeout with a given timeout value. + * @param __TIMEOUT__ Timeout value to set for fast RX. + * @retval None. + */ +#define __HAL_MRSUBG_SET_FAST_RX_TIMEOUT(__TIMEOUT__) MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->FAST_RX_TIMER, MR_SUBG_GLOB_DYNAMIC_FAST_RX_TIMER_FAST_RX_TIMEOUT, __TIMEOUT__) + +/** + * @brief Set the wakeup offset with a given offset value. + * @param __OFFSET__ Offset value to set for wakeup. + * @retval None. + */ +#define __HAL_MRSUBG_SET_WAKEUP_OFFSET(__OFFSET__) MODIFY_REG_FIELD(MR_SUBG_GLOB_RETAINED->WAKEUP_CTRL, MR_SUBG_GLOB_RETAINED_WAKEUP_CTRL_SOC_WAKEUP_OFFSET, __OFFSET__) + +/** + * @brief Enable CS blanking. + * @retval None. + */ +#define __HAL_MRSUBG_SET_CS_BLANKING() SET_BIT(MR_SUBG_GLOB_STATIC->AS_QI_CTRL, MR_SUBG_GLOB_STATIC_AS_QI_CTRL_AS_CS_BLANKING) + +/** + * @brief Clear CS blanking. + * @retval None. + */ +#define __HAL_MRSUBG_CLEAR_CS_BLANKING() CLEAR_BIT(MR_SUBG_GLOB_STATIC->AS_QI_CTRL, MR_SUBG_GLOB_STATIC_AS_QI_CTRL_AS_CS_BLANKING) + +/** + * @brief Set the PQI threshold with a given threshold value. + * @param __THRVAL__ The threshold level. + * @retval None. + */ +#define __HAL_MRSUBG_SET_PQI_THRESHOLD(__THRVAL__) MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->AS_QI_CTRL, MR_SUBG_GLOB_STATIC_AS_QI_CTRL_PQI_THR, __THRVAL__) + +/** + * @brief Enable WMBUS and SQI mask. + * @retval None. + */ +#define __HAL_MRSUBG_WMBUS_ENABLE_AND_SQI_MASK() {CLEAR_BIT(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_OR_nAND_SELECT); SET_BIT(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_SQI_TIMEOUT_MASK);} + +/** + * @brief Get the IF offset digital value. + * @retval The IF offset digital value. + */ +#define __HAL_MRSUBG_GET_IF_OFFSET_DIG() READ_REG_FIELD(MR_SUBG_GLOB_STATIC->IF_CTRL, MR_SUBG_GLOB_STATIC_IF_CTRL_IF_OFFSET_DIG) + +/** +* @brief Get the RSSI level in dBm. +* @retval The RSSI level to convert. +*/ +#define __HAL_MRSUBG_CONVERT_RSSI_TO_DBM(__VALUE__) (__VALUE__/2)-(96+GAIN_RX_CHAIN) + + /** + * @} + */ + + +/** @defgroup MRSUBG_Exported_Types MRSUBG Exported Types + * @{ + */ + +/** + * @brief STM32WL3 Modulation enumeration + */ +typedef enum { + MOD_2FSK = 0x00, /*!< 2-FSK modulation selected */ + MOD_4FSK = 0x01, /*!< 4-FSK modulation selected */ + MOD_2GFSK05 = 0x12, /*!< 2GFSK modulation selected with BT = 0.5 */ + MOD_2GFSK1 = 0x02, /*!< 2GFSK modulation selected with BT = 1 */ + MOD_4GFSK05 = 0x13, /*!< 4GFSK modulation selected with BT = 0.5 */ + MOD_4GFSK1 = 0x03, /*!< 4GFSK modulation selected with BT = 1 */ + MOD_ASK = 0x05, /*!< ASK modulation selected. */ + MOD_OOK = 0x05, /*!< OOK modulation selected. */ + MOD_POLAR = 0x06, /*!< Polar modulation selected. */ + MOD_CW = 0x07, /*!< CW modulation selected */ +} MRSubGModSelect; + +/** + * @brief STM32WL3 selection of the PRBS polynomial + */ +typedef enum{ + PN9 = 0x00, /* x^9 +x^5 + 1 with the initial state equal to 0x1FF. */ + PN15 = 0x01, /* x^15 +x^14 + 1 with the initial state equal to 0x7FFF. */ +} MRSubG_PN_SEL; + +/** + * @brief STM32WL3 Time Capture selection trigger + */ +typedef enum{ + TC_SEL_DISABLE = 0x00, /* The feature is disabled, no time capture will occur. */ + TC_SEL_END_OF_TX = 0x01, /* The interpolated absolute time is latched on end of transmission information. */ + TC_SEL_END_OF_RX = 0x02, /* The interpolated absolute time is latched on end of reception information whatever the CRC result (RX OK or CRC error). */ + TC_SEL_SYNC_DETECT = 0x03, /* The interpolated absolute time is latched on the SYNC word detection event. */ +} MRSubG_TimeCaptureSel; + + +/** + * @brief STM32WL3 AFC reinitialization option to improve the AFC behavior on frames with PREAMBLE smaller than 64 bits + */ +typedef enum{ + AFC_REINIT_NONE = 0x00, /* No reinitialization allowed. */ + AFC_REINIT_RSSI = 0x01, /* Reinitialization based on RSSI ramping. */ + AFC_REINIT_FDEV = 0x02, /* Reinitialization based on abnormal Fdev. */ + AFC_REINIT_RSSI_FDEV = 0x03, /* Reinitialization based on both RSSI and abnormal Fdev. <- DEFAULT */ +} MRSubG_AFCReinit; + + +/** + * @brief STM32WL3 Basic Packet Init structure definition. + */ +typedef enum { + PKT_BASIC = 0, + PKT_802_15_4 = 1 +} MRSubG_PcktType; + +/** + * @brief WMbus submode enumeration. + */ +typedef enum { + WMBUS_SUBMODE_NOT_CONFIGURED = 0, /*!< WMBUS submode S1, S2 (long header) - Header length = WMBUS_prmbl_ctrl + 279 (in "01" bit pairs) , Sync word = 0x7696 (length 18 bits) */ + WMBUS_SUBMODE_S1_S2_LONG_HEADER, /*!< WMBUS submode S1, S2 (long header) - Header length = WMBUS_prmbl_ctrl + 279 (in "01" bit pairs) , Sync word = 0x7696 (length 18 bits) */ + WMBUS_SUBMODE_S1_M_S2_T2_OTHER_TO_METER, /*!< WMBUS submode S1-m, S2, T2 (other to meter) - Header length = WMBUS_prmbl_ctrl + 15 (in "01" bit pairs) , Sync word = 0x7696 (length 18 bits)*/ + WMBUS_SUBMODE_T1_T2_METER_TO_OTHER, /*!< WMBUS submode T1, T2 (meter to other) - Header length = WMBUS_prmbl_ctrl + 19 (in "01" bit pairs) , Sync word = 0x3D (length 10 bits)*/ + WMBUS_SUBMODE_R2_SHORT_HEADER, /*!< WMBUS submode R2, short header - Header length = WMBUS_prmbl_ctrl + 39 (in "01" bit pairs) , Sync word = 0x7696 (length 18 bits)*/ +} WMbusSubmode; + +/** + * @brief STM32WL3 MRSUBG Radio Config structure definition + */ +typedef struct { + uint32_t lFrequencyBase; /*!< Specifies the base carrier frequency (in Hz) */ + MRSubGModSelect xModulationSelect; /*!< Specifies the modulation @ref MRSubGModSelect */ + uint32_t lDatarate; /*!< Specifies the datarate expressed in sps.*/ + uint32_t lFreqDev; /*!< Specifies the frequency deviation expressed in Hz. */ + uint32_t lBandwidth; /*!< Specifies the channel filter bandwidth expressed in Hz. */ + uint8_t dsssExp; /*!< Specifies the DSSS spreading exponent. Use 0 to disable DSSS. */ + int8_t outputPower; /*!< PA value to write expressed in dBm. */ + MRSubG_PA_DRVMode PADrvMode; /*!< PA drive mode. */ +} SMRSubGConfig; + + +/** + * @brief STM32WL3 MRSUBG RF version structure definition + */ +typedef struct { + uint8_t revision; /*!< Revision of the RFIP (to be used for metal fixes)*/ + uint8_t version; /*!< Version of the RFIP (to be used for cut upgrades)*/ + uint8_t product; /*!< Used for major upgrades (new protocols support / new features)*/ +} SMRSubGVersion; + +/** + * @brief STM32WL3 Basic Packet Init structure definition. + */ +typedef struct { + uint16_t PreambleLength; /*!< Set the preamble length of packet in pairs of bits (0 to 2046) */ + uint16_t PostambleLength; /*!< Set the postable length of packet. The number of POSTAMBLE pairs of bits can be set from 0 to 63. */ + uint8_t SyncLength; /*!< Set the sync word length of packet in bits. From 1 to 64 bits. */ + uint32_t SyncWord; /*!< Set the sync words in MSB. */ + MRSubG_LengthMode FixVarLength; /*!< Enable the variable length mode. */ + MRSubG_PreambleSeq PreambleSequence; /*!< Select the PREAMBLE pattern to be applied. */ + MRSubG_PostambleSeq PostambleSequence; /*!< Packet postamble control: postamble bit sequence selection. */ + MRSubG_PcktCrcMode CrcMode; /*!< Set the CRC type. @ref MRSubG_PcktCrcMode */ + MRSubG_PcktCoding Coding; /*!< Enable the FEC/Viterbi. */ + FunctionalState DataWhitening; /*!< Enable the data whitening. */ + MRSubG_LenWidthhMode LengthWidth; /*!< Set the length width. this bit field is considered/relevant only if FIX_VAR_LEN=1 */ + FunctionalState SyncPresent; /*!< ndicate if a SYNC word is present on the frame or not (null length) */ +} MRSubG_PcktBasicFields; + +/** + * @brief STM32WL3 WMBUS Packet Init structure definition. + */ +typedef struct { + WMbusSubmode xWMbusSubmode; /*!< Set the WMBUS submode. @ref WMbusSubmode */ + uint16_t PreambleLength; /*!< Set the preamble length of packet. From 1 to 2046 bit. */ + uint16_t PostambleLength; /*!< Set the postable length of packet. From 1 to 126 bit. */ +} MRSubG_WMBUS_PcktFields; + +/** + * @brief STM32WL3 802.15.4 FEC encoding types. + */ +typedef enum { + FEC_15_4_G_NONE = 0, + FEC_15_4_G_NRNSC = 1, + FEC_15_4_G_RSC = 2, + FEC_15_4_G_RSC_Interleaving = 3 +} MRSubG_FEC15_4gType; + +/** + * @brief STM32WL3 802.15.4 Packet Init structure definition. + */ +typedef struct { + MRSubGModSelect Modulation; /*!< Enumerated value as follow: + - 0: MOD_2FSK + - 1: MOD_4FSK */ + uint8_t PreambleLength; /*!< number of times the standard preamble sequence shall be repeated. + The standard preamble sequence is "01010101" for 2-FSK + and "0111011101110111" for 4-FSK. From 4 to 64. */ + MRSubG_PcktCrcMode FCSType; /*!< Enumerated value as follow: + - 0: FCS_32BIT CRC mode5 + - 1: FCS_16BIT CRC mode3 */ + FunctionalState Whitening; /*!< Enable the data whitening. */ + MRSubG_FEC15_4gType FecType; /*!< FEC type for 802.15.4g */ + uint16_t FrameLength; /*!< size of payload + FCS, in bytes */ +} MRSubG_802_15_4_PcktFields; + + +/** + * @} + */ + +/** @defgroup MRSUBG_Exported_Functions MRSUBG Exported Functions + * @{ + */ +void HAL_MRSubG_MspInit(void); +void HAL_MRSubG_MspDeInit(void); + +void HAL_MRSubG_IRQ_Callback(void); +void HAL_MRSubG_BUSY_Callback(void); +void HAL_MRSubG_TX_RX_SEQUENCE_Callback(void); +void HAL_MRSubG_WKUP_Callback(void); +void HAL_MRSubG_IRQHandler(void); +void HAL_MRSubG_BUSY_IRQHandler(void); +void HAL_MRSubG_TX_RX_SEQUENCE_IRQHandler(void); +void HAL_MRSubG_WKUP_IRQHandler(void); + +SMRSubGVersion HAL_MRSubGGetVersion(void); +uint8_t HAL_MRSubG_Init(SMRSubGConfig* pxSRadioInitStruct); +void HAL_MRSubG_GetInfo(SMRSubGConfig* pxSRadioInitStruct); +void HAL_MRSubG_SetFrequencyBase(uint32_t lFBase); +uint32_t HAL_MRSubG_GetFrequencyBase(void); +void HAL_MRSubG_SetDatarate(uint32_t lDatarate); +uint32_t HAL_MRSubG_GetDatarate(void); +void HAL_MRSubG_SetFrequencyDev(uint32_t lFDev); +uint32_t HAL_MRSubG_GetFrequencyDev(void); +void HAL_MRSubG_SetChannelBW(uint32_t lBandwidth); +uint32_t HAL_MRSubG_GetChannelBW(void); +void HAL_MRSubG_SetModulation(MRSubGModSelect xModulation, uint8_t dsssExponent); +MRSubGModSelect HAL_MRSubG_GetModulation(void); +int32_t HAL_MRSubG_GetRssidBm(void); +void HAL_MRSubG_SetRSSIThreshold(int16_t rssiTh); +int32_t HAL_MRSubG_GetRSSIThreshold(void); +void HAL_MRSubG_SetPALeveldBm(uint8_t cIndex, int8_t lPowerdBm, MRSubG_PA_DRVMode drvMode); +int8_t HAL_MRSubG_GetPALeveldBm(void); +uint32_t HAL_MRSubG_GetBytesOfTransaction(void); +uint32_t HAL_MRSubG_Sequencer_Microseconds(uint32_t microseconds); +uint32_t HAL_MRSubG_Sequencer_Milliseconds(uint32_t milliseconds); +uint32_t HAL_MRSubG_Sequencer_Seconds(uint32_t seconds); +ErrorStatus HAL_MRSubG_Sequencer_ApplyStaticConfig(MRSubG_Sequencer_GlobalConfiguration *cfg); +ErrorStatus HAL_MRSubG_Sequencer_ApplyDynamicConfig(MRSubG_Sequencer_ActionConfiguration *cfg, MRSubGCmd cmd); +void HAL_MRSubG_PktBasicSetPayloadLength(uint16_t nPayloadLength); +void HAL_MRSubG_PacketBasicInit(MRSubG_PcktBasicFields* pxPktBasicInit); +void HAL_MRSubG_WMBus_PacketInit(MRSubG_WMBUS_PcktFields* pxPktWMbusInit); +void HAL_MRSubG_802_15_4_PacketInit(MRSubG_802_15_4_PcktFields* px802_15_4PktInit); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_MRSUBG_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_mrsubg_timer.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_mrsubg_timer.h new file mode 100644 index 0000000000..00240651ff --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_mrsubg_timer.h @@ -0,0 +1,263 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_mrsubg_timer.h + * @author GPM WBL Application Team + * @brief MRSUBG Timer HAL module + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_MRSUBG_TIMER_H +#define STM32WL3x_HAL_MRSUBG_TIMER_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include +#include "stm32wl3x_hal_def.h" +#include "stm32wl3x_ll_mrsubg_timer.h" +#include "stm32wl3x_hal_pwr.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup MRSUBG_TIMER + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup MRSUBG_TIMER_Exported_Types MRSUBG Timer Exported Types + * @{ + */ + +/** + * @brief MRSUBG TIMER Init Structure definition + */ +typedef struct { + uint32_t HSE_XTAL_freq; /*!< HSE XTAL frequency */ + uint16_t XTAL_StartupTime; /*!< XTAL startup in us unit */ + BOOL enableInitialCalibration; /*!< Enable initial estimation of the frequency of the + * Low Speed Oscillator, otherwise it will be assumed + * fixed at 32.768 kHz. */ + uint32_t periodicCalibrationInterval; /*!< Periodic calibration interval in ms, to disable set to 0 */ +} MRSUBG_TIMER_InitTypeDef; + +/** + * @brief VIRTUAL TIMER Callback pointer definition + */ +typedef void (*VTIMER_CallbackType)(void *); + +/** + * @brief VIRTUAL TIMER handle Structure definition + */ +typedef struct VTIMER_HandleTypeS { + uint64_t expiryTime; /*!< Managed internally when the timer is started */ + VTIMER_CallbackType callback; /*!< Pointer to the user callback */ + BOOL active; /*!< Managed internally when the timer is started */ + struct VTIMER_HandleTypeS *next; /*!< Managed internally when the timer is started */ + void *userData; /*!< Pointer to user data */ +} VTIMER_HandleType; + +/** + * @brief MRSUBG TIMER status enumeration definition + */ +typedef enum { + MRSUBG_TIMER_OFF = 0, + MRSUBG_TIMER_PENDING = 1, +} MRSUBG_TIMER_Status; + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup MRSUBG_TIMER_Exported_Constants MRSUBG Timer Exported Constants + * @{ + */ + + +/** + * @brief MRSUBG TIMER Status + */ +#define WAKEUP_MRSUBG_TIMER_BUSY (0x01U) +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup MRSUBG_Timer_Exported_Functions MRSUBG Timer Exported Functions + * @{ + */ +void HAL_MRSUBG_TIMER_CPU_WKUP_Callback(void); +void HAL_MRSUBG_TIMER_CPU_WKUP_IRQHandler(void); + +/** @defgroup MRSUBG_Timer_EF_Config MRSUBG Timer Init and Configuration functions + * @{ + */ + +/** + * @brief Initialize the MRSUBG timer module. It must be placed in the initialization + * section of the application. + * @param MRSUBG_TIMER_InitStruct MRSUBG Timer Initialization parameters + * @retval None + */ + void HAL_MRSUBG_TIMER_Init(MRSUBG_TIMER_InitTypeDef *MRSUBG_TIMER_InitStruct); + +/** + * @brief Timer module state machine. Check and schedule the calibration. + * Check expired timers and execute user callback. + * It must be placed inside the infinite loop. + * @retval None + */ +void HAL_MRSUBG_TIMER_Tick(void); + +/** + * @} + */ + +/** @defgroup MRSUBG_Timer_EF_Management MRSUBG Timer Management functions + * @{ + */ + +/** + * @brief Return the status of the RFIP Wakeup timer and the last value programmed in the register. + * @param time: return the RFIP Wakeup time. + * @retval 0 if no timer has been programmed. + * @retval 1 if RFIP Wakeup Timer has been programmed. + */ +uint8_t HAL_MRSUBG_TIMER_GetRadioTimerValue(uint32_t *time); + +/** + * @brief Returns the admitted low power mode according to the next timer activity. + * @return Low Power mode + */ +PowerSaveLevels HAL_MRSUBG_TIMER_PowerSaveLevelCheck(void); + +/** + * @} + */ + +/** @defgroup MRSUBG_Timer_EF_Management_TimeUnit MRSUBG Timer Management Time Unit + * @{ + */ + +/** + * @brief Translates time in microseconds into machine time units. + * @param time: Microseconds to be converted in MTU + * @return Machine time value + */ +uint64_t HAL_MRSUBG_TIMER_UsToMachinetime(uint64_t time); + +/** + * @brief Translates time machine time in microseconds. + * @param time: Machine time to be converted in microseconds + * @return Time value in microseconds + */ +uint64_t HAL_MRSUBG_TIMER_MachinetimeToUs(uint64_t time); + +/** + * @brief This function returns the current reference time expressed in system time units. + * The returned value can be used as absolute time parameter where needed in the other + * HAL_MRSUBG_TIMER* APIs + * @return absolute current time expressed in system time units. + */ +uint64_t HAL_MRSUBG_TIMER_GetCurrentSysTime(void); + +/** + * @} + */ + +/** @defgroup MRSUBG_Timer_EF_Virtual_Timer MRSUBG Timer Virtual Timer functions + * @{ + */ + +/** + * @brief Starts a one-shot virtual timer for the given relative timeout value expressed in us + * @param timerHandle: The virtual timer + * @param usRelTimeout: The relative time, from current time, expressed in us + * @retval 0 if the timerHandle is valid. + * @retval 1 if the timerHandle is not valid. It is already started. + */ +uint32_t HAL_MRSUBG_TIMER_StartVirtualTimer(VTIMER_HandleType *timerHandle, uint64_t usRelTimeout); + +/** + * @brief Starts a one-shot virtual timer for the given relative timeout value expressed in ms + * @param timerHandle: The virtual timer + * @param msRelTimeout: The relative time, from current time, expressed in ms + * @retval 0 if the timerHandle is valid. + * @retval 1 if the timerHandle is not valid. It is already started. + */ +uint32_t HAL_MRSUBG_TIMER_StartVirtualTimerMs(VTIMER_HandleType *timerHandle, uint32_t msRelTimeout); + +/** + * @brief Stops the one-shot virtual timer specified if found + * @param timerHandle: The virtual timer + * @retval None + */ +void HAL_MRSUBG_TIMER_StopVirtualTimer(VTIMER_HandleType *timerHandle); + +/** + * @brief Returns the absolute expiry time of a running virtual timer expressed in internal system time units. + * @param timerHandle: The virtual timer + * @retval sysTime: Absolute time expressed in internal system time units. + */ +uint64_t HAL_MRSUBG_TIMER_ExpiryTime(VTIMER_HandleType *timerHandle); + +/** + * @brief Virtual timer Timeout Callback. It signals that a host timeout occurred. + * @retval None + */ +void HAL_MRSUBG_TIMER_TimeoutCallback(void); + +/** + * @brief Returns the number of timers in the queue. + * @return number of timers in the queue. +*/ +uint32_t HAL_MRSUBG_TIMER_GetPendingTimers(void); + +void HAL_MRSUBG_TIMER_MspInit(void); + +void HAL_MRSUBG_TIMER_MspDeInit(void); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*STM32WL3x_HAL_MRSUBG_TIMER_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_pwr.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_pwr.h new file mode 100644 index 0000000000..a7806d47a3 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_pwr.h @@ -0,0 +1,759 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_pwr.h + * @author MCD Application Team + * @brief Header file of PWR HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_PWR_H +#define STM32WL3x_HAL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" +#include "stm32wl3x_ll_pwr.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup PWR PWR + * @brief PWR HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PWR_Exported_Types PWR Exported Types + * @{ + */ + +/** + * @brief PWR PVD configuration structure definition + */ +typedef struct +{ + uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. + This parameter can be a value of @ref PWR_PVD_Detection_Level. */ + + uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. + This parameter can be a value of @ref PWR_PVD_Mode. */ +} PWR_PVDTypeDef; + +/** + * @brief PWR DEEPSTOP configuration structure definition + */ +typedef struct +{ + uint32_t deepStopMode; /*!< Specifies the configuration of the slow clock in DEEPSTOP. + This parameter can be one of the following value: + - PWR_DEEPSTOP_WITH_SLOW_CLOCK_OFF + - PWR_DEEPSTOP_WITH_SLOW_CLOCK_ON */ + +} PWR_DEEPSTOPTypeDef; + +/** + * @brief PWR SHUTDOWN configuration structure definition + */ +typedef struct +{ + uint8_t BORStatus; /*!< Specifies the BOR status ENABLE or DISABLE */ + uint8_t WakeUpPinStatus; /*!< Specifies if the PB0 wake up source + is ENABLE or DISABLE*/ + uint8_t WakeUpPol; /*!< Specifies the wake up source polarity */ +} PWR_SHUTDOWNTypeDef; + +/** + * @brief PWR SAVE enum definition + */ +typedef enum +{ + POWER_SAVE_LEVEL_DISABLED = 0, + POWER_SAVE_LEVEL_SLEEP = 1, + POWER_SAVE_LEVEL_DEEPSTOP_TIMER = 2, + POWER_SAVE_LEVEL_DEEPSTOP_NOTIMER = 3 +} PowerSaveLevels; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_PVD_Detection_Level Power Voltage Detector Level selection + * @note Refer datasheet for selection voltage value + * @{ + */ +#define PWR_PVDLEVEL_0 (0x00000000U) /*!< PVD threshold around 2.05 V */ +#define PWR_PVDLEVEL_1 (PWR_CR2_PVDLS_0) /*!< PVD threshold around 2.20 V */ +#define PWR_PVDLEVEL_2 (PWR_CR2_PVDLS_1) /*!< PVD threshold around 2.36 V */ +#define PWR_PVDLEVEL_3 (PWR_CR2_PVDLS_1 | PWR_CR2_PVDLS_0) /*!< PVD threshold around 2.52 V */ +#define PWR_PVDLEVEL_4 (PWR_CR2_PVDLS_2) /*!< PVD threshold around 2.64 V */ +#define PWR_PVDLEVEL_5 (PWR_CR2_PVDLS_2 | PWR_CR2_PVDLS_0) /*!< PVD threshold around 2.81 V */ +#define PWR_PVDLEVEL_6 (PWR_CR2_PVDLS_2 | PWR_CR2_PVDLS_1) /*!< PVD threshold around 2.91 V */ +#define PWR_PVDLEVEL_7 (PWR_CR2_PVDLS) /*!< External input analog voltage (compared internally to VREFINT for BlueNRG-LP and LPS. Compared internally to VBGP for STM32WL33) */ +/** + * @} + */ + +/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode + * @{ + */ +#define PWR_PVD_MODE_NORMAL (0x00000000U) /*!< Basic mode is used */ +#define PWR_PVD_MODE_IT (SYSCFG_PWRC_IER_PVD_IE) /*!< Interrupt Mode detection */ +/** + * @} + */ + +/** @defgroup PWR_Flags PWR Flags + * @{ + */ +/*--------------------------------IWUF-------------------------------*/ +#define PWR_FLAG_LPUART 0x00000000U +#define PWR_FLAG_RTC 0x00000001U +#define PWR_FLAG_LCD 0x00000002U +#define PWR_FLAG_COMP 0x00000003U +#define PWR_FLAG_LCSC 0x00000004U +#define PWR_FLAG_MRSUBG 0x00000005U +#define PWR_FLAG_MRSUBGHCPU 0x00000006U +#define PWR_FLAG_LPAWUR 0x00000007U + +/*--------------------------------SR2--------------------------------*/ +#define PWR_FLAG_SMPSBYPR 0x00000008U +#define PWR_FLAG_SMPSENR 0x00000009U +#define PWR_FLAG_SMPSRDY 0x0000000AU +#define PWR_FLAG_REGLPS 0x0000000BU +#define PWR_FLAG_REGMS 0x0000000CU +#define PWR_FLAG_PVDO 0x0000000DU + +/*--------------------------------WUFA--------------------------------*/ +#define PWR_FLAG_WUFA0 0x0000000EU +#define PWR_FLAG_WUFA1 0x0000000FU +#define PWR_FLAG_WUFA2 0x00000010U +#define PWR_FLAG_WUFA3 0x00000011U +#define PWR_FLAG_WUFA4 0x00000012U +#define PWR_FLAG_WUFA5 0x00000013U +#define PWR_FLAG_WUFA6 0x00000014U +#define PWR_FLAG_WUFA7 0x00000015U +#define PWR_FLAG_WUFA8 0x00000016U +#define PWR_FLAG_WUFA9 0x00000017U +#define PWR_FLAG_WUFA10 0x00000018U +#define PWR_FLAG_WUFA11 0x00000019U +#define PWR_FLAG_WUFA12 0x0000001AU +#define PWR_FLAG_WUFA13 0x0000001BU +#define PWR_FLAG_WUFA14 0x0000001CU +#define PWR_FLAG_WUFA15 0x0000001DU +#define PWR_FLAG_WUFA_ALL 0x0000FFFFU + +/*--------------------------------WUFB--------------------------------*/ +#define PWR_FLAG_WUFB0 0x0000001EU +#define PWR_FLAG_WUFB1 0x0000001FU +#define PWR_FLAG_WUFB2 0x00000020U +#define PWR_FLAG_WUFB3 0x00000021U +#define PWR_FLAG_WUFB4 0x00000022U +#define PWR_FLAG_WUFB5 0x00000023U +#define PWR_FLAG_WUFB6 0x00000024U +#define PWR_FLAG_WUFB7 0x00000025U +#define PWR_FLAG_WUFB8 0x00000026U +#define PWR_FLAG_WUFB9 0x00000027U +#define PWR_FLAG_WUFB10 0x00000028U +#define PWR_FLAG_WUFB11 0x00000029U +#define PWR_FLAG_WUFB12 0x0000002AU +#define PWR_FLAG_WUFB13 0x0000002BU +#define PWR_FLAG_WUFB14 0x0000002CU +#define PWR_FLAG_WUFB15 0x0000002DU +#define PWR_FLAG_WUFB_ALL 0xFFFF0000U +#define PWR_FLAG_WUF_ALL (PWR_FLAG_WUFA_ALL | PWR_FLAG_WUFB_ALL) + +/*--------------------------------SDWN_WUF----------------------------*/ +#define PWR_FLAG_WUF 0x0000002EU + +/*--------------------------------EXTSRR------------------------------*/ +#define PWR_FLAG_DEEPSTOPF 0x00000030U +#define PWR_FLAG_RFPHASEF 0x00000031U + +/** + * @} + */ + +/** @defgroup PWR_WAKEUP_SOURCE Wakeup Source + * @{ + */ +#define PWR_WAKEUP_ALL 0x0000FFFF /*!< Enable all the wakeup source */ +#define PWR_WAKEUP_PIN0 (uint32_t)(1U << 0U) /*!< Enable the wakeup source IO0 */ +#define PWR_WAKEUP_PIN1 (uint32_t)(1U << 1U) /*!< Enable the wakeup source IO1 */ +#define PWR_WAKEUP_PIN2 (uint32_t)(1U << 2U) /*!< Enable the wakeup source IO2 */ +#define PWR_WAKEUP_PIN3 (uint32_t)(1U << 3U) /*!< Enable the wakeup source IO3 */ +#define PWR_WAKEUP_PIN4 (uint32_t)(1U << 4U) /*!< Enable the wakeup source IO4 */ +#define PWR_WAKEUP_PIN5 (uint32_t)(1U << 5U) /*!< Enable the wakeup source IO5 */ +#define PWR_WAKEUP_PIN6 (uint32_t)(1U << 6U) /*!< Enable the wakeup source IO6 */ +#define PWR_WAKEUP_PIN7 (uint32_t)(1U << 7U) /*!< Enable the wakeup source IO7 */ +#define PWR_WAKEUP_PIN8 (uint32_t)(1U << 8U) /*!< Enable the wakeup source IO8 */ +#define PWR_WAKEUP_PIN9 (uint32_t)(1U << 9U) /*!< Enable the wakeup source IO9 */ +#define PWR_WAKEUP_PIN10 (uint32_t)(1U << 10U) /*!< Enable the wakeup source IO10 */ +#define PWR_WAKEUP_PIN11 (uint32_t)(1U << 11U) /*!< Enable the wakeup source IO11 */ +#define PWR_WAKEUP_PIN12 (uint32_t)(1U << 12U) /*!< Enable the wakeup source IO12 */ +#define PWR_WAKEUP_PIN13 (uint32_t)(1U << 13U) /*!< Enable the wakeup source IO13 */ +#define PWR_WAKEUP_PIN14 (uint32_t)(1U << 14U) /*!< Enable the wakeup source IO14 */ +#define PWR_WAKEUP_PIN15 (uint32_t)(1U << 15U) /*!< Enable the wakeup source IO15 */ + +#define PWR_WAKEUP_LPAWUR PWR_IEWU_EWLPAWUR /*!< Enable wakeup on LPAWUR RFIP event */ +#define PWR_WAKEUP_SUBG PWR_IEWU_EWMRSUBG /*!< Enable wakeup on MRSUBG RFIP event */ +#define PWR_WAKEUP_SUBGHOST PWR_IEWU_EWMRSUBGHCPU /*!< Enable wakeup on MRSUBG Host CPU event */ +#define PWR_WAKEUP_LCSC PWR_IEWU_EIWL4 /*!< Enable wakeup on internal event (LCSC) */ +#define PWR_WAKEUP_COMP PWR_IEWU_EIWL3 /*!< Enable wakeup on internal event (COMP) */ +#define PWR_WAKEUP_LCD PWR_IEWU_EIWL2 /*!< Enable wakeup on internal event (LCD) */ +#define PWR_WAKEUP_RTC PWR_IEWU_EIWL1 /*!< Enable wakeup on internal event (RTC) */ +#define PWR_WAKEUP_LPUART PWR_IEWU_EIWL0 /*!< Enable wakeup on internal event (LPUART) */ + +/** + * @} + */ + +/** @defgroup PWR_WAKEUP_SOURCE_PORT IO Port for wakeup source + * @{ + */ +#define PWR_WAKEUP_PORTA (0x00000000U) /*!< IO port A to get out from DEEPSTOP mode */ +#define PWR_WAKEUP_PORTB (0x00000001U) /*!< IO port B to get out from DEEPSTOP mode */ +/** + * @} + */ + +/** @defgroup PWR_WAKEUP_POLARITY IOs Wakeup configuration polarity + * @{ + */ +#define PWR_WUP_RISIEDG (0x000000000U) +#define PWR_WUP_FALLEDG (0x000000001U) +/** + * @} + */ + +/** @defgroup PWR_LOW_PWR_MODE Low Power mode selection + * @{ + */ +#define PWR_MODE_DEEPSTOP (0x000000000U) +#define PWR_MODE_SHUTDOWN (PWR_CR1_LPMS) +/** + * @} + */ + +/** @defgroup PWR_DEEPSTOP_SLOW_CLOCK_CONFIG Slow clock configuration in DEEPSTOP mode + * @{ + */ +#define PWR_DEEPSTOP_WITH_SLOW_CLOCK_OFF (0x00000000U) +#define PWR_DEEPSTOP_WITH_SLOW_CLOCK_ON (0x00000001U) +/** + * @} + */ + +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PWR_Exported_Macros PWR Exported Macros + * @{ + */ +/** @brief Check PWR flags are set or not. + * @param __FLAG__ : Specifies the flag to check. + * This parameter can be one of the following values when available : + * @arg @ref PWR_FLAG_LPUART : LPUART Internal wakeup flag. + * Indicates that a wakeup from LPUART occurred since last clear. + * @arg @ref PWR_FLAG_RTC : RTC Internal wakeup flag. + * Indicates that a wakeup from RTC occurred since last clear. + * @arg @ref PWR_FLAG_LCD : LCD Internal wakeup flag. + * Indicates that a wakeup from LCD occurred since last clear. + * @arg @ref PWR_FLAG_COMP : COMP Internal wakeup flag. + * Indicates that a wakeup from COMP occurred since last clear. + * @arg @ref PWR_FLAG_LCSC : COMP Internal wakeup flag. + * Indicates that a wakeup from COMP occurred since last clear. + * @arg @ref PWR_FLAG_MRSUBG : COMP Internal wakeup flag. + * Indicates that a wakeup from COMP occurred since last clear. + * @arg @ref PWR_FLAG_MRSUBGHCPU : COMP Internal wakeup flag. + * Indicates that a wakeup from COMP occurred since last clear. + * @arg @ref PWR_FLAG_LPAWUR : COMP Internal wakeup flag. + * Indicates that a wakeup from COMP occurred since last clear. + * @arg @ref PWR_FLAG_SMPSBYPR : SMPS PRECHARGE mode status. + * Indicates that the SMPS regulator is in PRECHARGE mode. + * @arg @ref PWR_FLAG_SMPSENR : SMPS RUN mode status. + * Indicates that the SMPS regulator is in RUN mode. + * @arg @ref PWR_FLAG_SMPSRDY : SMPS ready status. + * Indicates that the SMPS regulator is ready. + * @arg @ref PWR_FLAG_REGLPS : Low Power regulator ready status. + * Indicates that the Low Power regulator is ready. + * @arg @ref PWR_FLAG_REGMS : Main regulator ready status. + * Indicates that the Low Power regulator is ready. + * @arg @ref PWR_FLAG_PVDO : Power voltage Detector Output. + * Indicates that the Low Power regulator is ready. + * @arg @ref PWR_FLAG_WUFA0 : PA0 pin wakeup flag. + * Indicates that a wakeup from PA0 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA1 : PA1 pin wakeup flag. + * Indicates that a wakeup from PA1 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA2 : PA2 pin wakeup flag. + * Indicates that a wakeup from PA2 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA3 : PA3 pin wakeup flag. + * Indicates that a wakeup from PA3 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA4 : PA4 pin wakeup flag. + * Indicates that a wakeup from PA4 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA5 : PA5 pin wakeup flag. + * Indicates that a wakeup from PA5 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA6 : PA6 pin wakeup flag. + * Indicates that a wakeup from PA6 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA7 : PA7 pin wakeup flag. + * Indicates that a wakeup from PA7 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA8 : PA8 pin wakeup flag. + * Indicates that a wakeup from PA8 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA9 : PA9 pin wakeup flag. + * Indicates that a wakeup from PA9 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA10 : PA10 pin wakeup flag. + * Indicates that a wakeup from PA10 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA11 : PA11 pin wakeup flag. + * Indicates that a wakeup from PA11 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA12 : PA12 pin wakeup flag. + * Indicates that a wakeup from PA12 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA13 : PA13 pin wakeup flag. + * Indicates that a wakeup from PA13 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA14 : PA14 pin wakeup flag. + * Indicates that a wakeup from PA14 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA15 : PA15 pin wakeup flag. + * Indicates that a wakeup from PA15 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB0 : PB0 pin wakeup flag. + * Indicates that a wakeup from PB0 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB1 : PB1 pin wakeup flag. + * Indicates that a wakeup from PB1 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB2 : PB2 pin wakeup flag. + * Indicates that a wakeup from PB2 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB3 : PB3 pin wakeup flag. + * Indicates that a wakeup from PB3 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB4 : PB4 pin wakeup flag. + * Indicates that a wakeup from PB4 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB5 : PB5 pin wakeup flag. + * Indicates that a wakeup from PB5 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB6 : PB6 pin wakeup flag. + * Indicates that a wakeup from PB6 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB7 : PB7 pin wakeup flag. + * Indicates that a wakeup from PB7 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB8 : PB8 pin wakeup flag. + * Indicates that a wakeup from PB8 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB9 : PB9 pin wakeup flag. + * Indicates that a wakeup from PB9 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB10 : PB10 pin wakeup flag. + * Indicates that a wakeup from PB10 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB11 : PB11 pin wakeup flag. + * Indicates that a wakeup from PB11 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB12 : PB12 pin wakeup flag. + * Indicates that a wakeup from PB12 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB13 : PB13 pin wakeup flag. + * Indicates that a wakeup from PB13 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB14 : PB14 pin wakeup flag. + * Indicates that a wakeup from PB14 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB15 : PB15 pin wakeup flag. + * Indicates that a wakeup from PB15 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUF : PB0 pin wakeup from shutdown flag + * Indicates a shutdown wakeup from PB0 pin occurred. + * @arg @ref PWR_FLAG_RFPHASEF : RFPHASE Flag. + * Indicates that the RF SUBGHz IP is awake and may require + * a system attention. + * @arg @ref PWR_FLAG_DEEPSTOPF : System DEEPTSTOP Flag. + * the device entered a DEEPSTOP mode. + * @retval The state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_PWR_GET_FLAG(__FLAG__)( \ + ((__FLAG__) == PWR_FLAG_LPUART) ? (READ_BIT(PWR->IWUF, PWR_IWUF_IWUF0) == \ + PWR_IWUF_IWUF0) : \ + ((__FLAG__) == PWR_FLAG_RTC) ? (READ_BIT(PWR->IWUF, PWR_IWUF_IWUF1) == \ + PWR_IWUF_IWUF1) : \ + ((__FLAG__) == PWR_FLAG_LCD) ? (READ_BIT(PWR->IWUF, PWR_IWUF_IWUF2) == \ + PWR_IWUF_IWUF2) : \ + ((__FLAG__) == PWR_FLAG_COMP) ? (READ_BIT(PWR->IWUF, PWR_IWUF_IWUF3) == \ + PWR_IWUF_IWUF3) : \ + ((__FLAG__) == PWR_FLAG_LCSC) ? (READ_BIT(PWR->IWUF, PWR_IWUF_IWUF4) == \ + PWR_IWUF_IWUF4) : \ + ((__FLAG__) == PWR_FLAG_MRSUBG) ? (READ_BIT(PWR->IWUF, PWR_IWUF_WMRSUBGF) == \ + PWR_IWUF_WMRSUBGF) : \ + ((__FLAG__) == PWR_FLAG_MRSUBGHCPU) ? (READ_BIT(PWR->IWUF, PWR_IWUF_WMRSUBGHCPUF) == \ + PWR_IWUF_WMRSUBGHCPUF) : \ + ((__FLAG__) == PWR_FLAG_LPAWUR) ? (READ_BIT(PWR->IWUF, PWR_IWUF_WLPAWURF) == \ + PWR_IWUF_WLPAWURF) : \ + ((__FLAG__) == PWR_FLAG_SMPSBYPR) ? (READ_BIT(PWR->SR2, PWR_SR2_SMPSBYPR) == \ + PWR_SR2_SMPSBYPR) : \ + ((__FLAG__) == PWR_FLAG_SMPSENR) ? (READ_BIT(PWR->SR2, PWR_SR2_SMPSENR) == \ + PWR_SR2_SMPSENR) : \ + ((__FLAG__) == PWR_FLAG_SMPSRDY) ? (READ_BIT(PWR->SR2, PWR_SR2_SMPSRDY) == \ + PWR_SR2_SMPSRDY) : \ + ((__FLAG__) == PWR_FLAG_REGLPS) ? (READ_BIT(PWR->SR2, PWR_SR2_REGLPS) == \ + PWR_SR2_REGLPS) : \ + ((__FLAG__) == PWR_FLAG_REGMS) ? (READ_BIT(PWR->SR2, PWR_SR2_REGMS) == \ + PWR_SR2_REGMS) : \ + ((__FLAG__) == PWR_FLAG_PVDO) ? (READ_BIT(PWR->SR2, PWR_SR2_PVDO) == \ + PWR_SR2_PVDO) : \ + ((__FLAG__) == PWR_FLAG_WUFA0) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF0) == \ + PWR_WUFA_WUF0) : \ + ((__FLAG__) == PWR_FLAG_WUFA1) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF1) == \ + PWR_WUFA_WUF1) : \ + ((__FLAG__) == PWR_FLAG_WUFA2) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF2) == \ + PWR_WUFA_WUF2) : \ + ((__FLAG__) == PWR_FLAG_WUFA3) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF3) == \ + PWR_WUFA_WUF3) : \ + ((__FLAG__) == PWR_FLAG_WUFA4) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF4) == \ + PWR_WUFA_WUF4) : \ + ((__FLAG__) == PWR_FLAG_WUFA5) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF5) == \ + PWR_WUFA_WUF5) : \ + ((__FLAG__) == PWR_FLAG_WUFA6) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF6) == \ + PWR_WUFA_WUF6) : \ + ((__FLAG__) == PWR_FLAG_WUFA7) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF7) == \ + PWR_WUFA_WUF7) : \ + ((__FLAG__) == PWR_FLAG_WUFA8) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF8) == \ + PWR_WUFA_WUF8) : \ + ((__FLAG__) == PWR_FLAG_WUFA9) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF9) == \ + PWR_WUFA_WUF9) : \ + ((__FLAG__) == PWR_FLAG_WUFA10) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF10) == \ + PWR_WUFA_WUF10) : \ + ((__FLAG__) == PWR_FLAG_WUFA11) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF11) == \ + PWR_WUFA_WUF11) : \ + ((__FLAG__) == PWR_FLAG_WUFA12) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF12) == \ + PWR_WUFA_WUF12) : \ + ((__FLAG__) == PWR_FLAG_WUFA13) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF13) == \ + PWR_WUFA_WUF13) : \ + ((__FLAG__) == PWR_FLAG_WUFA14) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF14) == \ + PWR_WUFA_WUF14) : \ + ((__FLAG__) == PWR_FLAG_WUFA15) ? (READ_BIT(PWR->WUFA, PWR_WUFA_WUF15) == \ + PWR_WUFA_WUF15) : \ + ((__FLAG__) == PWR_FLAG_WUFB0) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF0) == \ + PWR_WUFB_WUF0) : \ + ((__FLAG__) == PWR_FLAG_WUFB1) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF1) == \ + PWR_WUFB_WUF1) : \ + ((__FLAG__) == PWR_FLAG_WUFB2) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF2) == \ + PWR_WUFB_WUF2) : \ + ((__FLAG__) == PWR_FLAG_WUFB3) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF3) == \ + PWR_WUFB_WUF3) : \ + ((__FLAG__) == PWR_FLAG_WUFB4) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF4) == \ + PWR_WUFB_WUF4) : \ + ((__FLAG__) == PWR_FLAG_WUFB5) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF5) == \ + PWR_WUFB_WUF5) : \ + ((__FLAG__) == PWR_FLAG_WUFB6) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF6) == \ + PWR_WUFB_WUF6) : \ + ((__FLAG__) == PWR_FLAG_WUFB7) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF7) == \ + PWR_WUFB_WUF7) : \ + ((__FLAG__) == PWR_FLAG_WUFB8) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF8) == \ + PWR_WUFB_WUF8) : \ + ((__FLAG__) == PWR_FLAG_WUFB9) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF9) == \ + PWR_WUFB_WUF9) : \ + ((__FLAG__) == PWR_FLAG_WUFB10) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF10) == \ + PWR_WUFB_WUF10) : \ + ((__FLAG__) == PWR_FLAG_WUFB11) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF11) == \ + PWR_WUFB_WUF11) : \ + ((__FLAG__) == PWR_FLAG_WUFB12) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF12) == \ + PWR_WUFB_WUF12) : \ + ((__FLAG__) == PWR_FLAG_WUFB13) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF13) == \ + PWR_WUFB_WUF13) : \ + ((__FLAG__) == PWR_FLAG_WUFB14) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF14) == \ + PWR_WUFB_WUF14) : \ + ((__FLAG__) == PWR_FLAG_WUFB15) ? (READ_BIT(PWR->WUFB, PWR_WUFB_WUF15) == \ + PWR_WUFB_WUF15) : \ + ((__FLAG__) == PWR_FLAG_WUF) ? (READ_BIT(PWR->SDWN_WUF, PWR_SDWN_WUF_WUF) == \ + PWR_SDWN_WUF_WUF) : \ + ((__FLAG__) == PWR_FLAG_DEEPSTOPF) ? (READ_BIT(PWR->EXTSRR, PWR_EXTSRR_DEEPSTOPF) == \ + PWR_EXTSRR_DEEPSTOPF) : \ + (READ_BIT(PWR->EXTSRR, PWR_EXTSRR_RFPHASEF) == PWR_EXTSRR_RFPHASEF)) + +/** @brief Clear PWR flags. + * @param __FLAG__ : Specifies the flag to clear. + * This parameter can be one of the following values when available : + * @arg @ref PWR_FLAG_LPUART : LPUART Internal wakeup flag. + * Indicates that a wakeup from LPUART occurred since last clear. + * @arg @ref PWR_FLAG_RTC : RTC Internal wakeup flag. + * Indicates that a wakeup from RTC occurred since last clear. + * @arg @ref PWR_FLAG_LCD : LCD Internal wakeup flag. + * Indicates that a wakeup from LCD occurred since last clear. + * @arg @ref PWR_FLAG_COMP : COMP Internal wakeup flag. + * Indicates that a wakeup from COMP occurred since last clear. + * @arg @ref PWR_FLAG_LCSC : COMP Internal wakeup flag. + * Indicates that a wakeup from COMP occurred since last clear. + * @arg @ref PWR_FLAG_MRSUBG : COMP Internal wakeup flag. + * Indicates that a wakeup from COMP occurred since last clear. + * @arg @ref PWR_FLAG_MRSUBGHCPU : COMP Internal wakeup flag. + * Indicates that a wakeup from COMP occurred since last clear. + * @arg @ref PWR_FLAG_LPAWUR : COMP Internal wakeup flag. + * Indicates that a wakeup from COMP occurred since last clear. + * @arg @ref PWR_FLAG_WUFA0 : PA0 pin wakeup flag. + * Indicates that a wakeup from PA0 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA1 : PA1 pin wakeup flag. + * Indicates that a wakeup from PA1 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA2 : PA2 pin wakeup flag. + * Indicates that a wakeup from PA2 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA3 : PA3 pin wakeup flag. + * Indicates that a wakeup from PA3 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA4 : PA4 pin wakeup flag. + * Indicates that a wakeup from PA4 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA5 : PA5 pin wakeup flag. + * Indicates that a wakeup from PA5 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA6 : PA6 pin wakeup flag. + * Indicates that a wakeup from PA6 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA7 : PA7 pin wakeup flag. + * Indicates that a wakeup from PA7 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA8 : PA8 pin wakeup flag. + * Indicates that a wakeup from PA8 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA9 : PA9 pin wakeup flag. + * Indicates that a wakeup from PA9 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA10 : PA10 pin wakeup flag. + * Indicates that a wakeup from PA10 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA11 : PA11 pin wakeup flag. + * Indicates that a wakeup from PA11 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA12 : PA12 pin wakeup flag. + * Indicates that a wakeup from PA12 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA13 : PA13 pin wakeup flag. + * Indicates that a wakeup from PA13 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA14 : PA14 pin wakeup flag. + * Indicates that a wakeup from PA14 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFA15 : PA15 pin wakeup flag. + * Indicates that a wakeup from PA15 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB0 : PB0 pin wakeup flag. + * Indicates that a wakeup from PB0 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB1 : PB1 pin wakeup flag. + * Indicates that a wakeup from PB1 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB2 : PB2 pin wakeup flag. + * Indicates that a wakeup from PB2 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB3 : PB3 pin wakeup flag. + * Indicates that a wakeup from PB3 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB4 : PB4 pin wakeup flag. + * Indicates that a wakeup from PB4 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB5 : PB5 pin wakeup flag. + * Indicates that a wakeup from PB5 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB6 : PB6 pin wakeup flag. + * Indicates that a wakeup from PB6 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB7 : PB7 pin wakeup flag. + * Indicates that a wakeup from PB7 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB8 : PB8 pin wakeup flag. + * Indicates that a wakeup from PB8 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB9 : PB9 pin wakeup flag. + * Indicates that a wakeup from PB9 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB10 : PB10 pin wakeup flag. + * Indicates that a wakeup from PB10 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB11 : PB11 pin wakeup flag. + * Indicates that a wakeup from PB11 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB12 : PB12 pin wakeup flag. + * Indicates that a wakeup from PB12 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB13 : PB13 pin wakeup flag. + * Indicates that a wakeup from PB13 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB14 : PB14 pin wakeup flag. + * Indicates that a wakeup from PB14 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUFB15 : PB15 pin wakeup flag. + * Indicates that a wakeup from PB15 pin occurred since last clear. + * @arg @ref PWR_FLAG_WUF : PB0 pin wakeup from shutdown flag + * Indicates a shutdown wakeup from PB0 pin occurred.. + * @arg @ref PWR_FLAG_RFPHASEF : RFPHASE Flag. + * Indicates that the RF SUBGHz IP is awake and may require + * a system attention. + * @arg @ref PWR_FLAG_DEEPSTOPF : System DEEPTSTOP Flag. + * Indicates that the device entered a DEEPSTOP mode. + * @retval None. + */ +#define __HAL_PWR_CLEAR_FLAG(__FLAG__)( \ + ((__FLAG__) == PWR_FLAG_LPUART) ? (SET_BIT(PWR->IWUF, PWR_IWUF_IWUF0)) : \ + ((__FLAG__) == PWR_FLAG_RTC) ? (SET_BIT(PWR->IWUF, PWR_IWUF_IWUF1)) : \ + ((__FLAG__) == PWR_FLAG_LCD) ? (SET_BIT(PWR->IWUF, PWR_IWUF_IWUF2)) : \ + ((__FLAG__) == PWR_FLAG_COMP) ? (SET_BIT(PWR->IWUF, PWR_IWUF_IWUF3)) : \ + ((__FLAG__) == PWR_FLAG_LCSC) ? (SET_BIT(PWR->IWUF, PWR_IWUF_IWUF4)) : \ + ((__FLAG__) == PWR_FLAG_MRSUBG) ? (SET_BIT(PWR->IWUF, PWR_IWUF_WMRSUBGF)) : \ + ((__FLAG__) == PWR_FLAG_MRSUBGHCPU) ? (SET_BIT(PWR->IWUF, PWR_IWUF_WMRSUBGHCPUF)) : \ + ((__FLAG__) == PWR_FLAG_LPAWUR) ? (SET_BIT(PWR->IWUF, PWR_IWUF_WLPAWURF)) : \ + ((__FLAG__) == PWR_FLAG_WUFA0) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF0)) : \ + ((__FLAG__) == PWR_FLAG_WUFA1) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF1)) : \ + ((__FLAG__) == PWR_FLAG_WUFA2) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF2)) : \ + ((__FLAG__) == PWR_FLAG_WUFA3) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF3)) : \ + ((__FLAG__) == PWR_FLAG_WUFA4) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF4)) : \ + ((__FLAG__) == PWR_FLAG_WUFA5) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF5)) : \ + ((__FLAG__) == PWR_FLAG_WUFA6) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF6)) : \ + ((__FLAG__) == PWR_FLAG_WUFA7) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF7)) : \ + ((__FLAG__) == PWR_FLAG_WUFA8) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF8)) : \ + ((__FLAG__) == PWR_FLAG_WUFA9) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF9)) : \ + ((__FLAG__) == PWR_FLAG_WUFA10) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF10)) : \ + ((__FLAG__) == PWR_FLAG_WUFA11) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF11)) : \ + ((__FLAG__) == PWR_FLAG_WUFA12) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF12)) : \ + ((__FLAG__) == PWR_FLAG_WUFA13) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF13)) : \ + ((__FLAG__) == PWR_FLAG_WUFA14) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF14)) : \ + ((__FLAG__) == PWR_FLAG_WUFA15) ? (SET_BIT(PWR->WUFA, PWR_WUFA_WUF15)) : \ + ((__FLAG__) == PWR_FLAG_WUFB0) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF0)) : \ + ((__FLAG__) == PWR_FLAG_WUFB1) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF1)) : \ + ((__FLAG__) == PWR_FLAG_WUFB2) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF2)) : \ + ((__FLAG__) == PWR_FLAG_WUFB3) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF3)) : \ + ((__FLAG__) == PWR_FLAG_WUFB4) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF4)) : \ + ((__FLAG__) == PWR_FLAG_WUFB5) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF5)) : \ + ((__FLAG__) == PWR_FLAG_WUFB6) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF6)) : \ + ((__FLAG__) == PWR_FLAG_WUFB7) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF7)) : \ + ((__FLAG__) == PWR_FLAG_WUFB8) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF8)) : \ + ((__FLAG__) == PWR_FLAG_WUFB9) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF9)) : \ + ((__FLAG__) == PWR_FLAG_WUFB10) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF10)) : \ + ((__FLAG__) == PWR_FLAG_WUFB11) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF11)) : \ + ((__FLAG__) == PWR_FLAG_WUFB12) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF12)) : \ + ((__FLAG__) == PWR_FLAG_WUFB13) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF13)) : \ + ((__FLAG__) == PWR_FLAG_WUFB14) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF14)) : \ + ((__FLAG__) == PWR_FLAG_WUFB15) ? (SET_BIT(PWR->WUFB, PWR_WUFB_WUF15)) : \ + ((__FLAG__) == PWR_FLAG_WUF) ? (CLEAR_BIT(PWR->SDWN_WUF, PWR_SDWN_WUF_WUF)) : \ + ((__FLAG__) == PWR_FLAG_DEEPSTOPF) ? (SET_BIT(PWR->EXTSRR, PWR_EXTSRR_DEEPSTOPF)) : \ + (SET_BIT(PWR->EXTSRR, PWR_EXTSRR_RFPHASEF))) + +/** + * @brief Enable the PVD Line. + * @retval None + */ +#define __HAL_PWR_PVD_ENABLE_IT() SET_BIT(SYSCFG->PWRC_IER, SYSCFG_PWRC_IER_PVD_IE) + +/** + * @brief Disable the PVD Interrupt Line. + * @retval None + */ +#define __HAL_PWR_PVD_DISABLE_IT() CLEAR_BIT(SYSCFG->PWRC_IER, SYSCFG_PWRC_IER_PVD_IE) + + +/** + * @brief Check whether or not the PVD interrupt flag is set. + * @retval PVD Line Status. + */ +#define __HAL_PWR_PVD_GET_FLAG() (READ_BIT(SYSCFG->PWRC_ISCR, SYSCFG_PWRC_ISCR_PVD_ISC)\ + == (SYSCFG_PWRC_ISCR_PVD_ISC)) ? 1UL : 0U + +/** + * @brief Clear the PVD interrupt flag. + * @retval None + */ +#define __HAL_PWR_PVD_CLEAR_FLAG() WRITE_REG(SYSCFG->PWRC_ISCR, SYSCFG_PWRC_ISCR_PVD_ISC) + +/** + * @brief Check if the wake up from SHUTWDOWN happens from PB0 or not. + * @retval None + */ +#define __HAL_PWR_IO_WAKEUP_SHUTDOWN_GET_FLAG() LL_PWR_IsIOWakeupSDN() + +/** + * @brief Check if the wake up from SHUTWDOWN happens from PB0 or not. + * @retval None + */ +#define __HAL_PWR_CLEAR_IO_WAKEUP_SHUTDOWN_FLAG() LL_PWR_ClearIOWakeupFlagSDN() + +/** + * @} + */ + + +/* Private macros --------------------------------------------------------*/ +/** @defgroup PWR_Private_Macros PWR Private Macros + * @{ + */ + +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ + ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ + ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ + ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) + + +#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_NORMAL)||\ + ((MODE) == PWR_PVD_MODE_IT)) + +#define IS_PWR_WAKEUP_SOURCE(PIN) (((PIN) == PWR_WAKEUP_ALL) ||\ + ((PIN) == PWR_WAKEUP_PIN0 ) ||\ + ((PIN) == PWR_WAKEUP_PIN1 ) ||\ + ((PIN) == PWR_WAKEUP_PIN2 ) ||\ + ((PIN) == PWR_WAKEUP_PIN3 ) ||\ + ((PIN) == PWR_WAKEUP_PIN4 ) ||\ + ((PIN) == PWR_WAKEUP_PIN5 ) ||\ + ((PIN) == PWR_WAKEUP_PIN6 ) ||\ + ((PIN) == PWR_WAKEUP_PIN7 ) ||\ + ((PIN) == PWR_WAKEUP_PIN8 ) ||\ + ((PIN) == PWR_WAKEUP_PIN9 ) ||\ + ((PIN) == PWR_WAKEUP_PIN10) ||\ + ((PIN) == PWR_WAKEUP_PIN11) ||\ + ((PIN) == PWR_WAKEUP_PIN12) ||\ + ((PIN) == PWR_WAKEUP_PIN13) ||\ + ((PIN) == PWR_WAKEUP_PIN14) ||\ + ((PIN) == PWR_WAKEUP_PIN15) ||\ + ((PIN) == PWR_WAKEUP_LPAWUR) ||\ + ((PIN) == PWR_WAKEUP_SUBG) ||\ + ((PIN) == PWR_WAKEUP_SUBGHOST) ||\ + ((PIN) == PWR_WAKEUP_LCSC) ||\ + ((PIN) == PWR_WAKEUP_COMP) ||\ + ((PIN) == PWR_WAKEUP_LCD) ||\ + ((PIN) == PWR_WAKEUP_RTC) ||\ + ((PIN) == PWR_WAKEUP_LPUART)) + +#define IS_PWR_WAKEUP_POLARITY(POL) (((POL) == PWR_WUP_RISIEDG) ||\ + ((POL) == PWR_WUP_FALLEDG)) + +/** + * @} + */ + +/* Include PWR HAL Extended module */ +#include "stm32wl3x_hal_pwr_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/* Programmable voltage detector functions ***********************************/ +HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); +void HAL_PWR_EnablePVD(void); +void HAL_PWR_DisablePVD(void); +void HAL_PWR_PVDCallback(void); + +/* Wake up pins configuration functions ***************************************/ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPort, uint32_t WakeUpPin, uint32_t WakeUpPolarity); +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPort, uint32_t WakeUpPin); +uint32_t HAL_PWR_GetClearWakeupSource(uint32_t WakeUpPort); + +/* Low power modes configuration functions ************************************/ +HAL_StatusTypeDef HAL_PWR_ConfigDEEPSTOP(PWR_DEEPSTOPTypeDef *sConfigDEEPSTOP); +HAL_StatusTypeDef HAL_PWR_ConfigSHUTDOWN(PWR_SHUTDOWNTypeDef *sConfigSHUTDOWN); +void HAL_PWR_EnterSLEEPMode(void); +void HAL_PWR_EnterDEEPSTOPMode(void); + + +/* Sleep on exit and sev on pending configuration functions *******************/ +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + +/* Interrupt handler functions ************************************************/ +void HAL_PWR_PVD_IRQHandler(void); +void HAL_PWR_WKUP_IRQHandler(void); +void HAL_PWR_WKUPx_Callback(uint32_t wakeupPort, uint32_t wakeupIOs); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32WL3x_HAL_PWR_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_pwr_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_pwr_ex.h new file mode 100644 index 0000000000..98e5bc349a --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_pwr_ex.h @@ -0,0 +1,250 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_pwr_ex.h + * @author MCD Application Team + * @brief Header file of PWR HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_PWR_EX_H +#define STM32WL3x_HAL_PWR_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup PWREx PWREx + * @brief PWR Extended HAL module driver + * @{ + */ + + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants + * @{ + */ + +/** @defgroup PWREx_GPIO_Bit_Number GPIO bit number for pull I/O setting + * @{ + */ +#define PWR_GPIO_BIT_0 (uint32_t)(1U << 0U) /*!< GPIO port I/O pin 0 */ +#define PWR_GPIO_BIT_1 (uint32_t)(1U << 1U) /*!< GPIO port I/O pin 1 */ +#define PWR_GPIO_BIT_2 (uint32_t)(1U << 2U) /*!< GPIO port I/O pin 2 */ +#define PWR_GPIO_BIT_3 (uint32_t)(1U << 3U) /*!< GPIO port I/O pin 3 */ +#define PWR_GPIO_BIT_4 (uint32_t)(1U << 4U) /*!< GPIO port I/O pin 4 */ +#define PWR_GPIO_BIT_5 (uint32_t)(1U << 5U) /*!< GPIO port I/O pin 5 */ +#define PWR_GPIO_BIT_6 (uint32_t)(1U << 6U) /*!< GPIO port I/O pin 6 */ +#define PWR_GPIO_BIT_7 (uint32_t)(1U << 7U) /*!< GPIO port I/O pin 7 */ +#define PWR_GPIO_BIT_8 (uint32_t)(1U << 8U) /*!< GPIO port I/O pin 8 */ +#define PWR_GPIO_BIT_9 (uint32_t)(1U << 9U) /*!< GPIO port I/O pin 9 */ +#define PWR_GPIO_BIT_10 (uint32_t)(1U << 10U) /*!< GPIO port I/O pin 10 */ +#define PWR_GPIO_BIT_11 (uint32_t)(1U << 11U) /*!< GPIO port I/O pin 11 */ +#define PWR_GPIO_BIT_12 (uint32_t)(1U << 12U) /*!< GPIO port I/O pin 12 */ +#define PWR_GPIO_BIT_13 (uint32_t)(1U << 13U) /*!< GPIO port I/O pin 13 */ +#define PWR_GPIO_BIT_14 (uint32_t)(1U << 14U) /*!< GPIO port I/O pin 14 */ +#define PWR_GPIO_BIT_15 (uint32_t)(1U << 15U) /*!< GPIO port I/O pin 15 */ +/** + * @} + */ + +/** @defgroup PWREx_GPIO GPIO port + * @{ + */ +#define PWR_GPIO_A (0x00000000U) /*!< GPIO port A */ +#define PWR_GPIO_B (0x00000001U) /*!< GPIO port B */ +/** + * @} + */ + +/** @defgroup PWREx_SMPS_OPERATING_MODES SMPS step down converter operating modes + * @{ + */ +#define PWR_SMPS_ON (0x000000000U) /*!< SMPS step down ON */ +#define PWR_SMPS_OFF PWR_CR5_NOSMPS /*!< SMPS step down OFF */ +#define PWR_SMPS_BYPASS PWR_SMPS_PRECHARGE /*!< SMPS is disabled and bypassed in precharge mode */ + +/** + * @} + */ + +/** @defgroup PWR_LL_SMPS_PRECHARGE_MODE SMPS PRECHARGE Mode + * @{ + */ +#define PWR_NO_SMPS_PRECHARGE (0x000000000U) /*!< SMPS not in pecharge mode */ +#define PWR_SMPS_PRECHARGE PWR_CR5_SMPSFBYP /*!< SMPS is disabled and bypassed in precharge mode */ + +/** + * @} + */ + +/** @defgroup PWREx_SMPS_BOM SMPS BOM Configuration + * @{ + */ +#define PWR_SMPS_BOM1 (0x000000000U) /*!< SMPS BOM1 1.5 uH */ +#define PWR_SMPS_BOM2 PWR_CR5_SMPSBOMSEL_0 /*!< SMPS BOM2 2.2 uH */ +#define PWR_SMPS_BOM3 PWR_CR5_SMPSBOMSEL_1 /*!< SMPS BOM3 10 uH */ +/** + * @} + */ + +/** @defgroup PWREx_SMPS_OUTPUT_VOLTAGE_LEVEL SMPS step down converter output voltage scaling voltage level + * @{ + */ +/* Note: SMPS voltage is trimmed during device production to control + the actual voltage level variation from device to device. */ + +#define PWR_SMPS_OUTPUT_VOLTAGE_1V20 (0x00000000U ) /*!< 1.20V (min VBAT = 1.20V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_1V30 (PWR_CR5_SMPSLVL_1|PWR_CR5_SMPSLVL_0 ) /*!< 1.30V (min VBAT = 1.30V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_1V40 (PWR_CR5_SMPSLVL_2) /*!< 1.40V (min VBAT = 1.40V) (default) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_1V50 (PWR_CR5_SMPSLVL_2|PWR_CR5_SMPSLVL_0) /*!< 1.50V (min VBAT = 1.50V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_1V60 (PWR_CR5_SMPSLVL_2|PWR_CR5_SMPSLVL_1) /*!< 1.60V (min VBAT = 1.60V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_1V70 (PWR_CR5_SMPSLVL_2|PWR_CR5_SMPSLVL_1|PWR_CR5_SMPSLVL_0) /*!< 1.70V (min VBAT = 1.70V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_1V80 (PWR_CR5_SMPSLVL_3) /*!< 1.80V (min VBAT = 1.80V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_1V90 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_0) /*!< 1.90V (min VBAT = 1.90V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_2V00 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_1) /*!< 2.00V (min VBAT = 2.00V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_2V10 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_1|PWR_CR5_SMPSLVL_0) /*!< 2.10V (min VBAT = 2.10V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_2V20 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_2) /*!< 2.20V (min VBAT = 2.20V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_2V30 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_2|PWR_CR5_SMPSLVL_0) /*!< 2.30V (min VBAT = 2.30V) */ +#define PWR_SMPS_OUTPUT_VOLTAGE_2V40 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_2|PWR_CR5_SMPSLVL_1|PWR_CR5_SMPSLVL_0) /*!< 2.40V (min VBAT = 2.40V) */ + +/** + * @} + */ + +/** @defgroup PWREx_RAM_Contents_DEEPSTOP_Retention PWR Extended SRAM Contents DEEPSTOP Retention + * @{ + */ +#define PWR_RAMRET_1 (0x00000001U) /*!< RAM1 bank retention in DEEPSOTP mode */ + +/** + * @} + */ + +/** + * @} + */ +/* Private define ------------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Private macros --------------------------------------------------------*/ +/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros + * @{ + */ + +#define IS_PWR_GPIO_BIT_NUMBER(BIT_NUMBER) (((BIT_NUMBER) & GPIO_PIN_MASK) != (uint32_t)0x00) + +#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\ + ((GPIO) == PWR_GPIO_B)) + +#define IS_PWR_SMPS_MODE(SMPS_MODE) (((SMPS_MODE) == PWR_SMPS_ON) ||\ + ((SMPS_MODE) == PWR_SMPS_OFF) ||\ + ((SMPS_MODE) == PWR_SMPS_PRECHARGE)) + +#define IS_PWR_SMPS_BOM(BOM) (((BOM) == PWR_SMPS_BOM1) ||\ + ((BOM) == PWR_SMPS_BOM2) ||\ + ((BOM) == PWR_SMPS_BOM3)) + +#define IS_PWR_SMPS_OUTPUT_VOLTAGE(SMPS_OUTPUT_VOLTAGE) (((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V20) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V30) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V40) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V50) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V60) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V70) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V80) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_1V90) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_2V00) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_2V10) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_2V20) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_2V30) ||\ + ((SMPS_OUTPUT_VOLTAGE) == PWR_SMPS_OUTPUT_VOLTAGE_2V40)) + +/** + * @} + */ + + +/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PWREx_Exported_Functions_Group1 I/O Pull-Up Pull-Down Configuration Functions + * @{ + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber); +void HAL_PWREx_EnablePullUpPullDownConfig(void); +void HAL_PWREx_DisablePullUpPullDownConfig(void); + +/** + * @} + */ +/* Peripheral Control functions **********************************************/ +void HAL_PWREx_DisableInternalWakeUpLine(uint32_t WakeUpPeripehral); +void HAL_PWREx_EnableInternalWakeUpLine(uint32_t WakeUpPeripheral, uint32_t WakeUpPolarity); +uint32_t HAL_PWREx_GetClearInternalWakeUpLine(void); + +/** @addtogroup PWREx_Exported_Functions_Group2 SMPS Configuration Functions + * @{ + */ +HAL_StatusTypeDef HAL_PWREx_ConfigSMPS(uint32_t outputVoltage, uint32_t BOM); +void HAL_PWREx_SMPS_SetMode(uint32_t OperatingMode); +uint32_t HAL_PWREx_SMPS_GetMode(void); +/** + * @} + */ +/* Low Power modes configuration functions ************************************/ +void HAL_PWREx_EnterSHUTDOWNMode(void); +void HAL_PWREx_EnableDEEPSTOP2(void); +void HAL_PWREx_DisableDEEPSTOP2(void); +/** @addtogroup PWREx_Exported_Functions_Group3 Memories Retention Functions + * @{ + */ +void HAL_PWREx_EnableSRAMRetention(void); +void HAL_PWREx_DisableSRAMRetention(void); +void HAL_PWREx_EnableGPIORetention(void); +void HAL_PWREx_DisableGPIORetention(void); +void HAL_PWREx_EnableDBGRetention(void); +void HAL_PWREx_DisableDBGRetention(void); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_PWR_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rcc.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rcc.h new file mode 100644 index 0000000000..9410382dc5 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rcc.h @@ -0,0 +1,1755 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_rcc.h + * @author MCD Application Team + * @brief Header file of RCC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_RCC_H +#define STM32WL3x_HAL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" +#include "stm32wl3x_ll_rcc.h" +#include "stm32wl3x_ll_bus.h" +#include "stm32wl3x_ll_pwr.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup RCC + * @{ + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_Private_Macros + * @{ + */ +/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters + * @{ + */ + +#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) ((((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \ + (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE_BYPASS) == RCC_OSCILLATORTYPE_LSE_BYPASS)) + +#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON)) + +#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) + +#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON)) + +#define IS_RCC_LSE_BYPASS(__LSE_BYPASS__) (((__LSE_BYPASS__) == RCC_LSE_BYPASS_OFF) ||\ + ((__LSE_BYPASS__) == RCC_LSE_BYPASS_ON)) + +#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) + +#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_RC64MPLL) || \ + ((__SOURCE__) == RCC_SYSCLKSOURCE_DIRECT_HSE)) +#define IS_RCC_SYSCLK_DIVIDER(__HCLK__) ((((__HCLK__) == RCC_RC64MPLL_DIV1) || ((__HCLK__) == RCC_RC64MPLL_DIV2) || \ + ((__HCLK__) == RCC_RC64MPLL_DIV4) || ((__HCLK__) == RCC_RC64MPLL_DIV8) || \ + ((__HCLK__) == RCC_RC64MPLL_DIV16)|| ((__HCLK__) == RCC_RC64MPLL_DIV32) || \ + ((__HCLK__) == RCC_RC64MPLL_DIV64)) || \ + (((__HCLK__) == RCC_DIRECT_HSE_DIV1) || ((__HCLK__) == RCC_DIRECT_HSE_DIV2) || \ + ((__HCLK__) == RCC_DIRECT_HSE_DIV3) || ((__HCLK__) == RCC_DIRECT_HSE_DIV6) || \ + ((__HCLK__) == RCC_DIRECT_HSE_DIV24) || \ + ((__HCLK__) == RCC_DIRECT_HSE_DIV48))) + +#define IS_RCC_MCO(__MCOX__) ( ((__MCOX__) == RCC_MCO1) || ((__MCOX__) == RCC_MCO2) || ((__MCOX__) == RCC_MCO3) ) + + +#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCOSOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_MCOSOURCE_SYSCLK) || \ + ((__SOURCE__) == RCC_MCOSOURCE_HSI) || \ + ((__SOURCE__) == RCC_MCOSOURCE_HSE) || \ + ((__SOURCE__) == RCC_MCOSOURCE_RC64MPLL) || \ + ((__SOURCE__) == RCC_MCOSOURCE_HSI64M_DIV2048) || \ + ((__SOURCE__) == RCC_MCOSOURCE_SMPS) || \ + ((__SOURCE__) == RCC_MCOSOURCE_ADC)) + +#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || ((__DIV__) == RCC_MCODIV_2) || \ + ((__DIV__) == RCC_MCODIV_4) || ((__DIV__) == RCC_MCODIV_8) || \ + ((__DIV__) == RCC_MCODIV_16)|| ((__DIV__) == RCC_MCODIV_32)) + +#define IS_RCC_LSE_DRIVE(__DRIVE__) (((__DRIVE__) == RCC_LSEDRIVE_LOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMLOW) || \ + ((__DRIVE__) == RCC_LSEDRIVE_MEDIUMHIGH) || \ + ((__DRIVE__) == RCC_LSEDRIVE_HIGH)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup RCC_Exported_Types RCC Exported Types + * @{ + */ + +/** + * @brief RCC Internal/External Oscillator (HSE, LSE and LSI) configuration structure definition + */ +typedef struct +{ + uint32_t OscillatorType; /*!< The oscillators to be configured. + This parameter can be a value of @ref RCC_Oscillator_Type */ + + uint32_t HSEState; /*!< The new state of the HSE. + This parameter can be a value of @ref RCC_HSE_Config */ + + uint32_t HSIState; /*!< The new state of the HSI. + This parameter can be a value of @ref RCC_HSI_Config */ + + uint32_t LSEState; /*!< The new state of the LSE. + This parameter can be a value of @ref RCC_LSE_Config */ + + uint32_t LSIState; /*!< The new state of the LSI. + This parameter can be a value of @ref RCC_LSI_Config */ + + uint32_t LSEBYPASSState; /*!< The new state of the LSE Bypass. + This parameter can be a value of @ref RCC_LSEBYPASS_Config */ +} RCC_OscInitTypeDef; + +/** + * @brief RCC System clock configuration structure definition + */ +typedef struct +{ + uint32_t SYSCLKSource; /*!< The clock source used as system clock (SYSCLK). + This parameter can be a value of @ref RCC_System_Clock_Source */ + + uint32_t SYSCLKDivider; /*!< The clock divider used as system clock (SYSCLK). + This parameter can be a value of @ref RCC_RC64MPLL_Clock_Divider or + @ref RCC_DIRECT_HSE_Clock_Divider */ +} RCC_ClkInitTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_Timeout_Value Timeout Values + * @{ + */ +#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT /* LSE timeout in ms */ +/** + * @} + */ + +/** @defgroup RCC_HSI_CALIBRATION_DEFAULT HSI default calibration trimming value + * @{ + */ +#define RCC_HSICALIBRATION_DEFAULT 0x1FU /*!< Default HSI calibration trimming value */ +/** + * @} + */ + +/** @defgroup RCC_Oscillator_Type Oscillator Type + * @{ + */ +#define RCC_OSCILLATORTYPE_NONE 0x00000000U /*!< Oscillator configuration unchanged */ +#define RCC_OSCILLATORTYPE_HSE 0x00000001U /*!< HSE to configure */ +#define RCC_OSCILLATORTYPE_LSE 0x00000002U /*!< LSE to configure */ +#define RCC_OSCILLATORTYPE_LSI 0x00000004U /*!< LSI to configure */ +#define RCC_OSCILLATORTYPE_LSE_BYPASS 0x00000008U /*!< Slow clock is directly provided */ +#define RCC_OSCILLATORTYPE_HSI 0x00000010U /*!< Oscillator configuration unchanged */ +/** + * @} + */ + +/** @defgroup RCC_HSI_Config HSI Config + * @{ + */ +#define RCC_HSI_OFF RCC_CFGR_STOPHSI /*!< HSI clock activation */ +#define RCC_HSI_ON 0x00000000U /*!< HSI clock deactivation */ +/** + * @} + */ + +/** @defgroup RCC_HSE_Config HSE Config + * @{ + */ +#define RCC_HSE_OFF 0x00000000U /*!< HSE clock deactivation */ +#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ +/** + * @} + */ + +/** @defgroup RCC_LSE_Config LSE Config + * @{ + */ +#define RCC_LSE_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_ON RCC_CR_LSEON /*!< LSE clock activation */ +/** + * @} + */ + +/** @defgroup RCC_LSI_Config LSI Config + * @{ + */ +#define RCC_LSI_OFF 0x00000000U /*!< LSI clock deactivation */ +#define RCC_LSI_ON RCC_CR_LSION /*!< LSI clock activation */ +/** + * @} + */ + +/** @defgroup RCC_LSEBYPASS_Config LSE Bypass Config + * @{ + */ +#define RCC_LSE_BYPASS_OFF 0x00000000U /*!< LSE clock deactivation */ +#define RCC_LSE_BYPASS_ON RCC_CR_LSEBYP /*!< LSE clock activation */ +/** + * @} + */ + +/** @defgroup RCC_DIRECT_HSE_Clock_Divider DIRECT HSE Clock Divider + * @{ + */ + +#define RCC_DIRECT_HSE_DIV1 LL_RCC_DIRECT_HSE_DIV_1 /*!< DIRECT HSE division factor = 1 */ +#define RCC_DIRECT_HSE_DIV2 LL_RCC_DIRECT_HSE_DIV_2 /*!< DIRECT HSE division factor = 2 */ +#define RCC_DIRECT_HSE_DIV3 LL_RCC_DIRECT_HSE_DIV_3 /*!< DIRECT HSE division factor = 3 */ +#define RCC_DIRECT_HSE_DIV6 LL_RCC_DIRECT_HSE_DIV_6 /*!< DIRECT HSE division factor = 6 */ +#define RCC_DIRECT_HSE_DIV12 LL_RCC_DIRECT_HSE_DIV_12 /*!< DIRECT HSE division factor = 12 */ +#define RCC_DIRECT_HSE_DIV24 LL_RCC_DIRECT_HSE_DIV_24 /*!< DIRECT HSE division factor = 24 */ +#define RCC_DIRECT_HSE_DIV48 LL_RCC_DIRECT_HSE_DIV_48 /*!< DIRECT HSE division factor = 48 */ + +/** + * @} + */ + +/** @defgroup RCC_RC64MPLL_Clock_Divider RC64MPLL Clock Divider + * @{ + */ +#define RCC_RC64MPLL_DIV1 LL_RCC_RC64MPLL_DIV_1 /*!< RC64MPLL division factor = 1 */ +#define RCC_RC64MPLL_DIV2 LL_RCC_RC64MPLL_DIV_2 /*!< RC64MPLL division factor = 2 */ +#define RCC_RC64MPLL_DIV4 LL_RCC_RC64MPLL_DIV_4 /*!< RC64MPLL division factor = 4 */ +#define RCC_RC64MPLL_DIV8 LL_RCC_RC64MPLL_DIV_8 /*!< RC64MPLL division factor = 8 */ +#define RCC_RC64MPLL_DIV16 LL_RCC_RC64MPLL_DIV_16 /*!< RC64MPLL division factor = 16 */ +#define RCC_RC64MPLL_DIV32 LL_RCC_RC64MPLL_DIV_32 /*!< RC64MPLL division factor = 32 */ +#define RCC_RC64MPLL_DIV64 LL_RCC_RC64MPLL_DIV_64 /*!< RC64MPLL division factor = 64 */ +/** + * @} + */ + +/** @defgroup RCC_Clock_SWITCH_Divider Clock Switch Divider + * @{ + */ +#define RCC_RC64MPLL_SWITCH_DIV1 LL_RCC_RC64MPLL_SWITCH_DIV_1 /*!< RC64MPLL division factor = 1 */ +#define RCC_RC64MPLL_SWITCH_DIV2 LL_RCC_RC64MPLL_SWITCH_DIV_2 /*!< RC64MPLL division factor = 2 */ +#define RCC_RC64MPLL_SWITCH_DIV4 LL_RCC_RC64MPLL_SWITCH_DIV_4 /*!< RC64MPLL division factor = 4 */ + +#define RCC_DIRECT_HSE_SWITCH_DIV1 LL_RCC_RC64MPLL_SWITCH_DIV_1 /*!< Direct HSE division factor = 1 */ +#define RCC_DIRECT_HSE_SWITCH_DIV2 LL_RCC_RC64MPLL_SWITCH_DIV_2 /*!< Direct HSE division factor = 2 */ +#define RCC_DIRECT_HSE_SWITCH_DIV3 LL_RCC_RC64MPLL_SWITCH_DIV_4 /*!< Direct HSE division factor = 3 */ +/** + * @} + */ + +/** @defgroup RCC_System_Clock_Source System Clock Source + * @{ + */ +#define RCC_SYSCLKSOURCE_RC64MPLL 0x00000000U /*!< RC64MPLL system clock configuration */ +#define RCC_SYSCLKSOURCE_DIRECT_HSE 0x00000001U /*!< DIRECT HSE system clock configuration */ +#define RCC_SYSCLKSOURCE_HSI 0x00000002U /*!< RC64MPLL system clock configuration */ + +/** + * @} + */ + +/** @defgroup RCC_MCO_Index MCO Index + * @{ + */ +#define RCC_MCO1 0x00000000U /*!< MCO1 index */ +#define RCC_MCO2 0x00000001U /*!< MCO2 index */ +#define RCC_MCO3 0x00000002U /*!< MCO3 index */ +/** + * @} + */ + +/** @defgroup RCC_MCO_Clock_Source MCO Clock Source + * @{ + */ +#define RCC_MCOSOURCE_NOCLOCK LL_RCC_MCOSOURCE_NOCLOCK /*!< MCO output disabled, no clock on MCO */ +#define RCC_MCO1SOURCE_SYSCLK LL_RCC_MCOSOURCE_SYSCLK /*!< SYSCLK selection as MCO source */ +#define RCC_MCO1SOURCE_HSI LL_RCC_MCOSOURCE_HSI /*!< HSI selection as MCO source */ +#define RCC_MCO1SOURCE_HSE LL_RCC_MCOSOURCE_HSE /*!< HSE after stabilization selection as MCO source */ +#define RCC_MCOSOURCE_RC64MPLL LL_RCC_MCOSOURCE_RC64MPLL /*!< RC64MPLL selection as MCO source */ +#define RCC_MCOSOURCE_HSI64M_DIV2048 LL_RCC_MCOSOURCE_HSI64M_DIV2048 /*!< HSI64M_DIV2048 selection as MCO source */ +#define RCC_MCOSOURCE_SMPS LL_RCC_MCOSOURCE_SMPS /*!< SMPS selection as MCO source */ +#define RCC_MCOSOURCE_ADC LL_RCC_MCOSOURCE_ADC /*!< ADC selection as MCO source */ +/** + * @} + */ + + +/** @defgroup RCC_MCOx_Clock_Prescaler MCO Clock Prescaler + * @{ + */ +#define RCC_MCODIV_1 LL_RCC_MCO_DIV_1 /*!< MCO not divided */ +#define RCC_MCODIV_2 LL_RCC_MCO_DIV_2 /*!< MCO divided by 2 */ +#define RCC_MCODIV_4 LL_RCC_MCO_DIV_4 /*!< MCO divided by 4 */ +#define RCC_MCODIV_8 LL_RCC_MCO_DIV_8 /*!< MCO divided by 8 */ +#define RCC_MCODIV_16 LL_RCC_MCO_DIV_16 /*!< MCO divided by 16 */ +#define RCC_MCODIV_32 LL_RCC_MCO_DIV_32 /*!< MCO divided by 32 */ +/** + * @} + */ + +/** @defgroup RCC_HSEAMPTHRESHOLD HSE bias current factor + * @{ + */ +#if defined(RCC_RFSWHSECR_SATRG) +#define RCC_HSEAMPTHRESHOLD_1_2 LL_RCC_HSEAMPTHRESHOLD_1_2 /*!< HSE bias current factor 1/2 */ +#define RCC_HSEAMPTHRESHOLD_3_4 LL_RCC_HSEAMPTHRESHOLD_3_4 /*!< HSE bias current factor 3/4 */ +#endif +/** + * @} + */ + +/** @defgroup RCC_HSE_CURRENTMAX HSE current max limit + * @{ + */ +#define RCC_HSE_CURRENTMAX_INIT LL_RCC_HSE_CURRENTMAX_INIT /*!< HSE current max limit = 8 * 40 uA/V */ +/** + * @} + */ + +/** @defgroup RCC_Interrupt Interrupts + * @{ + */ +#define RCC_IT_LSIRDY LL_RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */ +#define RCC_IT_LSERDY LL_RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */ +#define RCC_IT_HSIRDY LL_RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */ +#define RCC_IT_HSERDY LL_RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */ +#define RCC_IT_PLLRDY LL_RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */ +#define RCC_IT_PLL_UNLOCK LL_RCC_CIFR_PLLUNLOCKDETF /*!< PLL Unlock Interrupt flag */ +#define RCC_IT_RTCRSTRELRDY LL_RCC_CIFR_RTCRSTRELF /*!< RTC Reset Release Interrupt Flag */ +#define RCC_IT_WDGRSTRELRDY LL_RCC_CIFR_WDGRSTRELF /*!< WDG Reset Release Interrupt Flag */ +#if defined(RCC_CIFR_LPURSTF) +#define RCC_IT_LPURSTRELRDY LL_RCC_CIFR_LPURSTRELF /*!< LPU Reset Release Interrupt Flag */ +#endif +#if defined(RCC_CIFR_LCDRSTF) +#define RCC_IT_LCDRSTRELRDY LL_RCC_CIFR_LCDRSTRELF /*!< LCD Reset Release Interrupt Flag */ +#endif +#if defined(RCC_CIFR_LCSCRSTF) +#define RCC_IT_LCSCRSTRELRDY LL_RCC_CIFR_LCSCRSTRELF /*!< LCSC Reset Release Interrupt Flag */ +#endif + +/** + * @} + */ + + +/** @defgroup RCC_Flag Flags + * @{ + */ +/* Flags in the CR register */ +#define RCC_FLAG_HSIRDY RCC_CR_HSIRDY /*!< HSI Ready flag */ +#define RCC_FLAG_HSERDY RCC_CR_HSERDY /*!< HSE Ready flag */ +#define RCC_FLAG_PLLRDY RCC_CR_HSIPLLRDY /*!< PLL Ready flag */ +#define RCC_FLAG_LSIRDY RCC_CR_LSIRDY /*!< LSI Ready flag */ +#define RCC_FLAG_LSERDY RCC_CR_LSERDY /*!< LSE Ready flag */ + +/* Flags in the CSR register */ +#define RCC_FLAG_LOCKUPRST RCC_CSR_LOCKUPRSTF /*!< CPU lockup reset flag */ +#define RCC_FLAG_WDGRST RCC_CSR_WDGRSTF /*!< Watchdog reset flag */ +#define RCC_FLAG_SFTRST RCC_CSR_SFTRSTF /*!< Software reset flag */ +#define RCC_FLAG_PORRST RCC_CSR_PORRSTF /*!< Power-On or BOR reset flag */ +#define RCC_FLAG_PADRSTF RCC_CSR_PADRSTF /*!< NRSTn pad reset flag */ +/** + * @} + */ + +/** @defgroup RCC_LSEDrive_Config LSE Drive Configuration + * @{ + */ +#define RCC_LSEDRIVE_LOW LL_RCC_LSEDRIVE_LOW /*!< LSE low drive capability */ +#define RCC_LSEDRIVE_MEDIUMLOW LL_RCC_LSEDRIVE_MEDIUMLOW /*!< LSE medium low drive capability */ +#define RCC_LSEDRIVE_MEDIUMHIGH LL_RCC_LSEDRIVE_MEDIUMHIGH /*!< LSE medium high drive capability */ +#define RCC_LSEDRIVE_HIGH LL_RCC_LSEDRIVE_HIGH /*!< LSE high drive capability */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable AHB Peripheral Clock Enable Disable + * @brief Enable or disable the AHB peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA) +#define __HAL_RCC_GPIOA_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_CRC_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_CRC) +#define __HAL_RCC_RNG_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_RNG) +#if defined(AES) +#define __HAL_RCC_AES_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_AES) +#endif + +#define __HAL_RCC_DMA_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_DMA) +#define __HAL_RCC_GPIOA_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_CRC_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_CRC) +#define __HAL_RCC_RNG_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_RNG) +#if defined(AES) +#define __HAL_RCC_AES_CLK_DISABLE() LL_AHB1_GRP1_DisableClock(LL_AHB1_GRP1_PERIPH_AES) +#endif + +/** + * @} + */ + +/** @defgroup RCC_APB0_Clock_Enable_Disable APB0 Peripheral Clock Enable Disable + * @brief Enable or disable the APB0 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(TIM1) +#define __HAL_RCC_TIM1_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_TIM1) +#endif +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_TIM2) +#endif +#define __HAL_RCC_SYSCFG_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_SYSCFG) +#if defined(LCD) +#define __HAL_RCC_LCDC_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_LCDC) +#endif +#if defined(COMP1) +#define __HAL_RCC_COMP_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_COMP) +#endif +#if defined(DAC1) +#define __HAL_RCC_DAC_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_DAC) +#endif +#define __HAL_RCC_RTC_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_RTC) +#if defined(LCSC) +#define __HAL_RCC_LCSC_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_LCSC) +#endif +#define __HAL_RCC_WDG_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_WDG) +#if defined(TIM16) +#define __HAL_RCC_TIM16_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_TIM16) +#endif +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_TIM17) +#endif +#if defined (DBGMCU) +#define __HAL_RCC_DBGMCU_CLK_ENABLE() LL_APB0_GRP1_EnableClock(LL_APB0_GRP1_PERIPH_DBGMCU) +#endif + +#if defined(TIM1) +#define __HAL_RCC_TIM1_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_TIM1) +#endif +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_TIM2) +#endif +#define __HAL_RCC_SYSCFG_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_SYSCFG) +#if defined(LCD) +#define __HAL_RCC_LCDC_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_LCDC) +#endif +#if defined(COMP1) +#define __HAL_RCC_COMP_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_COMP) +#endif +#if defined(DAC1) +#define __HAL_RCC_DAC_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_DAC) +#endif +#define __HAL_RCC_RTC_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_RTC) +#if defined(LCSC) +#define __HAL_RCC_LCSC_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_LCSC) +#endif +#define __HAL_RCC_WDG_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_WDG) +#if defined(TIM16) +#define __HAL_RCC_TIM16_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_TIM16) +#endif +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_TIM17) +#endif +#if defined (DBGMCU) +#define __HAL_RCC_DBGMCU_CLK_DISABLE() LL_APB0_GRP1_DisableClock(LL_APB0_GRP1_PERIPH_DBGMCU) +#endif +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable + * @brief Enable or disable the APB1 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(SPI1) +#define __HAL_RCC_SPI1_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI1) +#endif +#define __HAL_RCC_ADCDIG_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_ADCDIG) +#define __HAL_RCC_ADCANA_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_ADCANA) +#define __HAL_RCC_LPUART1_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_LPUART1) +#define __HAL_RCC_USART1_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USART1) + +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI3) +#endif +#if defined(I2C1) +#define __HAL_RCC_I2C1_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C1) +#endif +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_ENABLE() LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C2) +#endif + +#if defined(SPI1) +#define __HAL_RCC_SPI1_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_SPI1) +#endif +#define __HAL_RCC_ADCDIG_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_ADCDIG) +#define __HAL_RCC_ADCANA_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_ADCANA) +#define __HAL_RCC_LPUART1_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_LPUART1) +#define __HAL_RCC_USART1_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_USART1) + +#if defined(SPI3) +#define __HAL_RCC_SPI3_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_SPI3) +#endif +#if defined(I2C1) +#define __HAL_RCC_I2C1_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_I2C1) +#endif +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_DISABLE() LL_APB1_GRP1_DisableClock(LL_APB1_GRP1_PERIPH_I2C2) +#endif +/** + * @} + */ + +/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable + * @brief Enable or disable the APB2 peripheral clock. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(MR_SUBG_RADIO) +#define __HAL_RCC_MRSUBG_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_MRSUBG) +#define __HAL_RCC_LPAWUR_CLK_ENABLE() LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_LPAWUR) + +#define __HAL_RCC_MRSUBG_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_MRSUBG) +#define __HAL_RCC_LPAWUR_CLK_DISABLE() LL_APB2_GRP1_DisableClock(LL_APB2_GRP1_PERIPH_LPAWUR) +#endif +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enabled or Disabled Status + * @brief Check whether the AHB peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#define __HAL_RCC_DMA_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA) +#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_CRC_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_CRC) +#define __HAL_RCC_RNG_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_RNG) +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_ENABLED() LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_AES) +#endif + +#define __HAL_RCC_DMA_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_DMA)) +#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_GPIOA)) +#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_GPIOB)) +#define __HAL_RCC_CRC_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_CRC)) +#define __HAL_RCC_RNG_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_RNG)) +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_DISABLED() !(LL_AHB1_GRP1_IsEnabledClock(LL_AHB1_GRP1_PERIPH_AES)) +#endif +/** + * @} + */ + +/** @defgroup RCC_APB0_Clock_Enable_Disable_Status APB0 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB0 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ + +#if defined(TIM1) +#define __HAL_RCC_TIM1_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_TIM1) +#endif +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_TIM2) +#endif +#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_SYSCFG) +#if defined(LCD) +#define __HAL_RCC_LCDC_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_LCDC) +#endif +#if defined(COMP1) +#define __HAL_RCC_COMP_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_COMP) +#endif +#if defined(DAC1) +#define __HAL_RCC_DAC_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_DAC) +#endif +#define __HAL_RCC_RTC_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_RTC) +#if defined(LCSC) +#define __HAL_RCC_LCSC_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_LCSC) +#endif +#define __HAL_RCC_WDG_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_WDG) +#if defined(TIM16) +#define __HAL_RCC_TIM16_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_TIM16) +#endif +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_TIM17) +#endif +#if defined(DBGMCU) +#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_DBGMCU) +#endif + +#if defined(TIM1) +#define __HAL_RCC_TIM1_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_TIM1)) +#endif +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_TIM2)) +#endif +#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_SYSCFG)) +#if defined(LCD) +#define __HAL_RCC_LCDC_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_LCDC)) +#endif +#if defined(COMP1) +#define __HAL_RCC_COMP_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_COMP)) +#endif +#if defined(DAC1) +#define __HAL_RCC_DAC_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_DAC)) +#endif +#define __HAL_RCC_RTC_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_RTC)) +#if defined(LCSC) +#define __HAL_RCC_LCSC_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_LCSC)) +#endif +#define __HAL_RCC_WDG_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_WDG)) +#if defined(TIM16) +#define __HAL_RCC_TIM16_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_TIM16)) +#endif +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_TIM17)) +#endif +#if defined(DBGMCU) +#define __HAL_RCC_DBGMCU_IS_CLK_DISABLED() !(LL_APB0_GRP1_IsEnabledClock(LL_APB0_GRP1_PERIPH_DBGMCU)) +#endif +/** + * @} + */ + + +/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB1 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(SPI1) +#define __HAL_RCC_SPI1_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_SPI1) +#endif +#define __HAL_RCC_ADCDIG_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_ADCDIG) +#define __HAL_RCC_ADCANA_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_ADCANA) +#define __HAL_RCC_LPUART1_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LPUART1) +#define __HAL_RCC_USART1_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_USART1) +#define __HAL_RCC_SPI3_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_SPI3) +#if defined(I2C1) +#define __HAL_RCC_I2C1_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C1) +#endif +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_ENABLED() LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C2) +#endif + +#if defined(SPI1) +#define __HAL_RCC_SPI1_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_SPI1)) +#endif +#define __HAL_RCC_ADCDIG_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_ADCDIG)) +#define __HAL_RCC_ADCANA_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_ADCANA)) +#define __HAL_RCC_LPUART1_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_LPUART1)) +#define __HAL_RCC_USART1_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_USART1)) +#define __HAL_RCC_SPI3_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_SPI3)) +#if defined(I2C1) +#define __HAL_RCC_I2C1_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C1)) +#endif +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_DISABLED() !(LL_APB1_GRP1_IsEnabledClock(LL_APB1_GRP1_PERIPH_I2C2)) +#endif + +/** + * @} + */ + + +/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enabled or Disabled Status + * @brief Check whether the APB2 peripheral clock is enabled or not. + * @note After reset, the peripheral clock (used for registers read/write access) + * is disabled and the application software has to enable this clock before + * using it. + * @{ + */ +#if defined(MR_SUBG_RADIO) +#define __HAL_RCC_MRSUBG_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_MRSUBG) +#define __HAL_RCC_LPAWUR_IS_CLK_ENABLED() LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_LPAWUR) + +#define __HAL_RCC_MRSUBG_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_MRSUBG)) +#define __HAL_RCC_LPAWUR_IS_CLK_DISABLED() !(LL_APB2_GRP1_IsEnabledClock(LL_APB2_GRP1_PERIPH_LPAWUR)) +#endif + +/** + * @} + */ + + +/** @defgroup RCC_AHB_Force_Release_Reset AHB Peripheral Force Release Reset + * @brief Force or release AHB peripheral reset. + * @{ + */ +#define __HAL_RCC_AHB1_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_ALL) +#define __HAL_RCC_DMA_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA) +#define __HAL_RCC_GPIOA_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_CRC_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_CRC) +#define __HAL_RCC_RNG_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_RNG) +#if defined(AES) +#define __HAL_RCC_AES_FORCE_RESET() LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_AES) +#endif + +#define __HAL_RCC_AHB1_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_ALL) +#define __HAL_RCC_DMA_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA) +#define __HAL_RCC_GPIOA_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_CRC_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_CRC) +#define __HAL_RCC_RNG_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_RNG) +#if defined(AES) +#define __HAL_RCC_AES_RELEASE_RESET() LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_AES) +#endif + +/** + * @} + */ + +/** @defgroup RCC_APB0_Force_Release_Reset APB0 Peripheral Force Release Reset + * @brief Force or release APB0 peripheral reset. + * @{ + */ + +#define __HAL_RCC_APB0_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_ALL) +#if defined(TIM1) +#define __HAL_RCC_TIM1_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_TIM1) +#endif +#if defined(TIM2) +#define __HAL_RCC_TIM2_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_TIM2) +#endif +#define __HAL_RCC_SYSCFG_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_SYSCFG) +#if defined(LCD) +#define __HAL_RCC_LCDC_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_LCDC) +#endif +#if defined(COMP1) +#define __HAL_RCC_COMP_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_COMP) +#endif +#if defined(DAC1) +#define __HAL_RCC_DAC_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_DAC) +#endif +#define __HAL_RCC_RTC_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_RTC) +#if defined(LCSC) +#define __HAL_RCC_LCSC_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_LCSC) +#endif +#define __HAL_RCC_WDG_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_WDG) +#if defined(TIM16) +#define __HAL_RCC_TIM16_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_TIM16) +#endif +#if defined(TIM17) +#define __HAL_RCC_TIM17_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_TIM17) +#endif +#if defined(DBGMCU) +#define __HAL_RCC_DBGMCU_FORCE_RESET() LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_DBGMCU) +#endif + +#define __HAL_RCC_APB0_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_ALL) +#if defined(TIM1) +#define __HAL_RCC_TIM1_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_TIM1) +#endif +#if defined(TIM2) +#define __HAL_RCC_TIM2_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_TIM2) +#endif +#define __HAL_RCC_SYSCFG_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_SYSCFG) +#if defined(LCD) +#define __HAL_RCC_LCDC_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_LCDC) +#endif +#if defined(COMP1) +#define __HAL_RCC_COMP_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_COMP) +#endif +#if defined(DAC1) +#define __HAL_RCC_DAC_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_DAC) +#endif +#define __HAL_RCC_RTC_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_RTC) +#if defined(LCSC) +#define __HAL_RCC_LCSC_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_LCSC) +#endif +#define __HAL_RCC_WDG_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_WDG) +#if defined(TIM16) +#define __HAL_RCC_TIM16_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_TIM16) +#endif +#if defined(TIM17) +#define __HAL_RCC_TIM17_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_TIM17) +#endif +#if defined(DBGMCU) +#define __HAL_RCC_DBGMCU_RELEASE_RESET() LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_DBGMCU) +#endif +/** + * @} + */ + +/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset + * @brief Force or release APB1 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB1_FORCE_RESET() LL_APB1_GRP1_ForceReset( RCC_APB1ENR_ADCDIGEN|\ + RCC_APB1ENR_LPUARTEN|RCC_APB1ENR_USARTEN|RCC_APB1ENR_SPI1EN|RCC_APB1ENR_SPI3EN|RCC_APB1ENR_I2C1EN|RCC_APB1ENR_I2C2EN) + +#if defined(SPI1) +#define __HAL_RCC_SPI1_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI1) +#endif +#define __HAL_RCC_ADC_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_ADCDIG) +#define __HAL_RCC_LPUART1_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LPUART1) +#define __HAL_RCC_USART1_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART1) +#define __HAL_RCC_SPI3_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI3) +#if defined(I2C1) +#define __HAL_RCC_I2C1_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1) +#endif +#if defined(I2C2) +#define __HAL_RCC_I2C2_FORCE_RESET() LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C2) +#endif + + +#define __HAL_RCC_APB1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(RCC_APB1ENR_ADCDIGEN|\ + RCC_APB1ENR_LPUARTEN|RCC_APB1ENR_USARTEN|RCC_APB1ENR_SPI1EN|RCC_APB1ENR_SPI3EN|RCC_APB1ENR_I2C1EN|RCC_APB1ENR_I2C2EN) + +#if defined(SPI1) +#define __HAL_RCC_SPI1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI1) +#endif +#define __HAL_RCC_ADC_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_ADCDIG) +#define __HAL_RCC_LPUART1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPUART1) +#define __HAL_RCC_USART1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART1) +#define __HAL_RCC_SPI3_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI3) +#if defined(I2C1) +#define __HAL_RCC_I2C1_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1) +#endif +#if defined(I2C2) +#define __HAL_RCC_I2C2_RELEASE_RESET() LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C2) +#endif + +/** + * @} + */ + + +/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset + * @brief Force or release APB2 peripheral reset. + * @{ + */ +#define __HAL_RCC_APB2_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ALL) +#if defined(MR_SUBG_RADIO) +#define __HAL_RCC_MRSUBG_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_MRSUBG) +#define __HAL_RCC_LPAWUR_FORCE_RESET() LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_LPAWUR) +#endif + +#define __HAL_RCC_APB2_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ALL) +#if defined(MR_SUBG_RADIO) +#define __HAL_RCC_MRSUBG_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_MRSUBG) +#define __HAL_RCC_LPAWUR_RELEASE_RESET() LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_LPAWUR) +#endif +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Sleep_Mode_Enable_Disable AHB Peripheral Clock Enable Disable in Sleep Mode + * @brief Enable or disable the AHB peripheral clock in Sleep Mode. + * @note After reset, the peripheral clock is enabled in Sleep Mode. + * @{ + */ + +#define __HAL_RCC_DMA_CLK_SLEEP_MODE_ENABLE() LL_AHB1_GRP1_EnableClockSleepMode(LL_AHB1_GRP1_PERIPH_DMA) +#define __HAL_RCC_FLASH_CLK_SLEEP_MODE_ENABLE() LL_AHB1_GRP1_EnableClockSleepMode(LL_AHB1_GRP1_PERIPH_FLASH) +#define __HAL_RCC_GPIOA_CLK_SLEEP_MODE_ENABLE() LL_AHB1_GRP1_EnableClockSleepMode(LL_AHB1_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_CLK_SLEEP_MODE_ENABLE() LL_AHB1_GRP1_EnableClockSleepMode(LL_AHB1_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_SRAM0_CLK_SLEEP_MODE_ENABLE() LL_AHB1_GRP1_EnableClockSleepMode(LL_AHB1_GRP1_PERIPH_SRAM0) +#define __HAL_RCC_SRAM1_CLK_SLEEP_MODE_ENABLE() LL_AHB1_GRP1_EnableClockSleepMode(LL_AHB1_GRP1_PERIPH_SRAM1) +#define __HAL_RCC_CRC_CLK_SLEEP_MODE_ENABLE() LL_AHB1_GRP1_EnableClockSleepMode(LL_AHB1_GRP1_PERIPH_CRC) +#define __HAL_RCC_RNG_CLK_SLEEP_MODE_ENABLE() LL_AHB1_GRP1_EnableClockSleepMode(LL_AHB1_GRP1_PERIPH_RNG) +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_MODE_ENABLE() LL_AHB1_GRP1_EnableClockSleepMode(LL_AHB1_GRP1_PERIPH_AES) +#endif + +#define __HAL_RCC_DMA_CLK_SLEEP_MODE_DISABLE() LL_AHB1_GRP1_DisableClockSleepMode(LL_AHB1_GRP1_PERIPH_DMA) +#define __HAL_RCC_FLASH_CLK_SLEEP_MODE_DISABLE() LL_AHB1_GRP1_DisableClockSleepMode(LL_AHB1_GRP1_PERIPH_FLASH) +#define __HAL_RCC_GPIOA_CLK_SLEEP_MODE_DISABLE() LL_AHB1_GRP1_DisableClockSleepMode(LL_AHB1_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_CLK_SLEEP_MODE_DISABLE() LL_AHB1_GRP1_DisableClockSleepMode(LL_AHB1_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_SRAM0_CLK_SLEEP_MODE_DISABLE() LL_AHB1_GRP1_DisableClockSleepMode(LL_AHB1_GRP1_PERIPH_SRAM0) +#define __HAL_RCC_SRAM1_CLK_SLEEP_MODE_DISABLE() LL_AHB1_GRP1_DisableClockSleepMode(LL_AHB1_GRP1_PERIPH_SRAM1) +#define __HAL_RCC_CRC_CLK_SLEEP_MODE_DISABLE() LL_AHB1_GRP1_DisableClockSleepMode(LL_AHB1_GRP1_PERIPH_CRC) +#define __HAL_RCC_RNG_CLK_SLEEP_MODE_DISABLE() LL_AHB1_GRP1_DisableClockSleepMode(LL_AHB1_GRP1_PERIPH_RNG) +#if defined(AES) +#define __HAL_RCC_AES_CLK_SLEEP_MODE_DISABLE() LL_AHB1_GRP1_DisableClockSleepMode(LL_AHB1_GRP1_PERIPH_AES) +#endif + +/** + * @} + */ + +/** @defgroup RCC_APB0_Enable_Disable_Clock_Sleep_mode APB0 Peripheral Clock Enable Disable in Sleep Mode + * @brief Enable or disable the APB0 peripheral clock. + * @note After reset, the peripheral clock is enabled in Sleep Mode. + * + * @{ + */ + +#if defined(TIM1) +#define __HAL_RCC_TIM1_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_TIM1) +#endif +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_TIM2) +#endif +#define __HAL_RCC_SYSCFG_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_SYSCFG) +#if defined(LCD) +#define __HAL_RCC_LCDC_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_LCDC) +#endif +#if defined(COMP1) +#define __HAL_RCC_COMP_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_COMP) +#endif +#if defined(DAC1) +#define __HAL_RCC_DAC_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_DAC) +#endif +#define __HAL_RCC_RTC_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_RTC) +#if defined(LCSC) +#define __HAL_RCC_LCSC_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_LCSC) +#endif +#define __HAL_RCC_WDG_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_WDG) +#if defined(TIM16) +#define __HAL_RCC_TIM16_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_TIM16) +#endif +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_TIM17) +#endif +#if defined (DBGMCU) +#define __HAL_RCC_DBGMCU_CLK_SLEEP_MODE_ENABLE() LL_APB0_GRP1_EnableClockSleepMode(LL_APB0_GRP1_PERIPH_DBGMCU) +#endif + +#if defined(TIM1) +#define __HAL_RCC_TIM1_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_TIM1) +#endif +#if defined(TIM2) +#define __HAL_RCC_TIM2_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_TIM2) +#endif +#define __HAL_RCC_SYSCFG_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_SYSCFG) +#if defined(LCD) +#define __HAL_RCC_LCDC_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_LCDC) +#endif +#if defined(COMP1) +#define __HAL_RCC_COMP_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_COMP) +#endif +#if defined(DAC1) +#define __HAL_RCC_DAC_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_DAC) +#endif +#define __HAL_RCC_RTC_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_RTC) +#if defined(LCSC) +#define __HAL_RCC_LCSC_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_LCSC) +#endif +#define __HAL_RCC_WDG_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_WDG) +#if defined(TIM16) +#define __HAL_RCC_TIM16_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_TIM16) +#endif +#if defined(TIM17) +#define __HAL_RCC_TIM17_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_TIM17) +#endif +#if defined (DBGMCU) +#define __HAL_RCC_DBGMCU_CLK_SLEEP_MODE_DISABLE() LL_APB0_GRP1_DisableClockSleepMode(LL_APB0_GRP1_PERIPH_DBGMCU) +#endif +/** + * @} + */ + + +/** @defgroup RCC_APB1_Clock_Enable_Disable_Sleep_Mode APB1 Peripheral Clock Enable Disable in Sleep Mode + * @brief Enable or disable the APB1 peripheral clock in Sleep Mode. + * @note After reset, the peripheral clock is enabled in Sleep Mode. + * @{ + */ + +#if defined(SPI1) +#define __HAL_RCC_SPI1_CLK_SLEEP_MODE_ENABLE() LL_APB1_GRP1_EnableClockSleepMode(LL_APB1_GRP1_PERIPH_SPI1) +#endif +#define __HAL_RCC_ADCDIG_CLK_SLEEP_MODE_ENABLE() LL_APB1_GRP1_EnableClockSleepMode(LL_APB1_GRP1_PERIPH_ADCDIG) +#define __HAL_RCC_ADCANA_CLK_SLEEP_MODE_ENABLE() LL_APB1_GRP1_EnableClockSleepMode(LL_APB1_GRP1_PERIPH_ADCANA) +#define __HAL_RCC_LPUART1_CLK_SLEEP_MODE_ENABLE() LL_APB1_GRP1_EnableClockSleepMode(LL_APB1_GRP1_PERIPH_LPUART1) +#define __HAL_RCC_USART1_CLK_SLEEP_MODE_ENABLE() LL_APB1_GRP1_EnableClockSleepMode(LL_APB1_GRP1_PERIPH_USART1) +#define __HAL_RCC_SPI3_CLK_SLEEP_MODE_ENABLE() LL_APB1_GRP1_EnableClockSleepMode(LL_APB1_GRP1_PERIPH_SPI3) +#if defined(I2C1) +#define __HAL_RCC_I2C1_CLK_SLEEP_MODE_ENABLE() LL_APB1_GRP1_EnableClockSleepMode(LL_APB1_GRP1_PERIPH_I2C1) +#endif +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_SLEEP_MODE_ENABLE() LL_APB1_GRP1_EnableClockSleepMode(LL_APB1_GRP1_PERIPH_I2C2) +#endif + +#if defined(SPI1) +#define __HAL_RCC_SPI1_CLK_SLEEP_MODE_DISABLE() LL_APB1_GRP1_DisableClockSleepMode(LL_APB1_GRP1_PERIPH_SPI1) +#endif +#define __HAL_RCC_ADCDIG_CLK_SLEEP_MODE_DISABLE() LL_APB1_GRP1_DisableClockSleepMode(LL_APB1_GRP1_PERIPH_ADCDIG) +#define __HAL_RCC_ADCANA_CLK_SLEEP_MODE_DISABLE() LL_APB1_GRP1_DisableClockSleepMode(LL_APB1_GRP1_PERIPH_ADCANA) +#define __HAL_RCC_LPUART1_CLK_SLEEP_MODE_DISABLE() LL_APB1_GRP1_DisableClockSleepMode(LL_APB1_GRP1_PERIPH_LPUART1) +#define __HAL_RCC_USART1_CLK_SLEEP_MODE_DISABLE() LL_APB1_GRP1_DisableClockSleepMode(LL_APB1_GRP1_PERIPH_USART1) +#define __HAL_RCC_SPI3_CLK_SLEEP_MODE_DISABLE() LL_APB1_GRP1_DisableClockSleepMode(LL_APB1_GRP1_PERIPH_SPI3) +#if defined(I2C1) +#define __HAL_RCC_I2C1_CLK_SLEEP_MODE_DISABLE() LL_APB1_GRP1_DisableClockSleepMode(LL_APB1_GRP1_PERIPH_I2C1) +#endif +#if defined(I2C2) +#define __HAL_RCC_I2C2_CLK_SLEEP_MODE_DISABLE() LL_APB1_GRP1_DisableClockSleepMode(LL_APB1_GRP1_PERIPH_I2C2) +#endif +/** + * @} + */ + +/** @defgroup RCC_AHB_Peripheral_Clock_Sleep_Mode_Enable_Disable_Status AHB Peripheral Clock Enabled or Disabled Status in Sleep Mode + * @brief Check whether the AHB peripheral clock is enabled or not in Sleep Mode. + * @note After reset, the peripheral clock is enabled in Sleep Mode. + * @{ + */ + +#define __HAL_RCC_DMA_IS_CLK_SLEEP_MODE_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_DMA) +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_MODE_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_FLASH) +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_MODE_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_GPIOA) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_MODE_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_GPIOB) +#define __HAL_RCC_SRAM0_IS_CLK_SLEEP_MODE_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_SRAM0) +#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_MODE_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_SRAM1) + +#define __HAL_RCC_CRC_IS_CLK_SLEEP_MODE_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_CRC) +#define __HAL_RCC_RNG_IS_CLK_SLEEP_MODE_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_RNG) +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_MODE_ENABLED() LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_AES) +#endif + +#define __HAL_RCC_DMA_IS_CLK_SLEEP_MODE_DISABLED() !(LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_DMA)) +#define __HAL_RCC_FLASH_IS_CLK_SLEEP_MODE_DISABLED() !(LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_FLASH)) +#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_MODE_DISABLED() !(LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_GPIOA)) +#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_MODE_DISABLED() !(LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_GPIOB)) +#define __HAL_RCC_SRAM0_IS_CLK_SLEEP_MODE_DISABLED() !(LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_SRAM0)) +#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_MODE_DISABLED() !(LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_SRAM1)) +#define __HAL_RCC_CRC_IS_CLK_SLEEP_MODE_DISABLED() !(LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_CRC)) +#define __HAL_RCC_RNG_IS_CLK_SLEEP_MODE_DISABLED() !(LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_RNG)) +#if defined(AES) +#define __HAL_RCC_AES_IS_CLK_SLEEP_MODE_DISABLED() !(LL_AHB1_GRP1_IsEnabledClockSleepMode(LL_AHB1_GRP1_PERIPH_AES)) +#endif +/** + * @} + */ + +/** @defgroup RCC_APB0_Clock_Sleep_Mode_Enable_Disable_Status APB0 Peripheral Clock in Sleep Mode Enabled or Disabled Status + * @brief Check whether the APB0 peripheral clock is enabled or not in sleep mode. + * @note After reset, the peripheral clock is enabled in Sleep Mode. + * @{ + */ + +#if defined(TIM1) +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_TIM1) +#endif +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_TIM2) +#endif +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_SYSCFG) +#if defined(LCD) +#define __HAL_RCC_LCDC_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_LCDC) +#endif +#if defined(COMP1) +#define __HAL_RCC_COMP_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_COMP) +#endif +#if defined(DAC1) +#define __HAL_RCC_DAC_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_DAC) +#endif +#define __HAL_RCC_RTC_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_RTC) +#if defined(LCSC) +#define __HAL_RCC_LCSC_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_LCSC) +#endif +#define __HAL_RCC_WDG_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_WDG) +#if defined(TIM16) +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_TIM16) +#endif +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_TIM17) +#endif +#if defined(DBGMCU) +#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_MODE_ENABLED() LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_DBGMCU) +#endif + +#if defined(TIM1) +#define __HAL_RCC_TIM1_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_TIM1)) +#endif +#if defined(TIM2) +#define __HAL_RCC_TIM2_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_TIM2)) +#endif +#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_SYSCFG)) +#if defined(LCD) +#define __HAL_RCC_LCDC_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_LCDC)) +#endif +#if defined(COMP1) +#define __HAL_RCC_COMP_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_COMP)) +#endif +#if defined(DAC1) +#define __HAL_RCC_DAC_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_DAC)) +#endif +#define __HAL_RCC_RTC_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_RTC)) +#if defined(LCSC) +#define __HAL_RCC_LCSC_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_LCSC)) +#endif +#define __HAL_RCC_WDG_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_WDG)) +#if defined(TIM16) +#define __HAL_RCC_TIM16_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_TIM16)) +#endif +#if defined(TIM17) +#define __HAL_RCC_TIM17_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_TIM17)) +#endif +#if defined(DBGMCU) +#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB0_GRP1_IsEnabledClockSleepMode(LL_APB0_GRP1_PERIPH_DBGMCU)) +#endif +/** + * @} + */ + +/** @defgroup RCC_APB1_Clock_Enable_Disable_Status_Sleep_Mode APB1 Peripheral Clock Enabled or Disabled Status in Sleep Mode + * @brief Check whether the APB1 peripheral clock is enabled or not in Sleep Mode + * @note After reset, the peripheral clock is enabled in Sleep Mode. + * + * @{ + */ +#if defined(SPI1) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_MODE_ENABLED() LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_SPI1) +#endif +#define __HAL_RCC_ADCDIG_IS_CLK_SLEEP_MODE_ENABLED() LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_ADCDIG) +#define __HAL_RCC_ADCANA_IS_CLK_SLEEP_MODE_ENABLED() LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_ADCANA) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_MODE_ENABLED() LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_LPUART1) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_MODE_ENABLED() LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_USART1) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_MODE_ENABLED() LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_SPI3) +#if defined(I2C1) +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_MODE_ENABLED() LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_I2C1) +#endif +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_MODE_ENABLED() LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_I2C2) +#endif + +#if defined(SPI1) +#define __HAL_RCC_SPI1_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_SPI1)) +#endif +#define __HAL_RCC_ADCDIG_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_ADCDIG)) +#define __HAL_RCC_ADCANA_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_ADCANA)) +#define __HAL_RCC_LPUART1_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_LPUART1)) +#define __HAL_RCC_USART1_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_USART1)) +#define __HAL_RCC_SPI3_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_SPI3)) +#if defined(I2C1) +#define __HAL_RCC_I2C1_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_I2C1)) +#endif +#if defined(I2C2) +#define __HAL_RCC_I2C2_IS_CLK_SLEEP_MODE_DISABLED() !(LL_APB1_GRP1_IsEnabledClockSleepMode(LL_APB1_GRP1_PERIPH_I2C2)) +#endif + +/** + * @} + */ + +/** @defgroup RCC_CLK_CONFIG_MACROS Clock Configuration Macros + * @{ + */ +/** @defgroup RCC_LSI_MACROS LSI Macros + * @{ + */ + + /** + * @brief Macro to configure the Internal High Speed oscillator (HSI). + * @note After enabling the HSI (RCC_HSI_ON), the application + * software should wait on HSIRDY flag to be set indicating that HSI clock + * is stable. + * @note The HSI is stopped by hardware when entering DEEPSTOP and SHUTDOWN modes. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator. + * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. + * @retval None + */ +#define __HAL_RCC_HSI_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_HSI_ON) \ + { \ + LL_RCC_HSI_Enable(); \ + } \ + else \ + { \ + LL_RCC_HSI_Disable(); \ + } \ + } while(0U) + +/** + * @brief Macro to get the HSI ready flag. + * @retval Returns the Ready Flag status + */ +#define __HAL_RCC_GET_HSI_READYFLAG() LL_RCC_HSI_IsReady() + +/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __HSICALIBRATIONVALUE__ specifies the calibration trimming value + * (default is RCC_HSICALIBRATION_DEFAULT). + * This parameter must be a number between Min_data=0 and Max_Data=63. + * @retval None + */ +#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) LL_RCC_HSI_SetCalibTrimming(__HSICALIBRATIONVALUE__) +/** + * @} + */ + +/** @defgroup RCC_LSI_MACROS LSI Macros + * @{ + */ +/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). + * @note After enabling the LSI, the application software should wait on + * LSIRDY flag to be set indicating that LSI clock is stable. + * @note LSI can not be disabled if the IWDG is running. + * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI1 oscillator + * clock cycles. + * @retval None + */ +#define __HAL_RCC_LSI_ENABLE() LL_RCC_LSI_Enable() +#define __HAL_RCC_LSI_DISABLE() LL_RCC_LSI_Disable() + +/** + * @brief Macro to get the LSI ready flag. + * @retval Returns the Ready Flag status + */ +#define __HAL_RCC_GET_LSI_READYFLAG() LL_RCC_LSI_IsReady() + +/** @brief Macro to adjust the Internal Low Speed oscillator (LSI) calibration value. + * @note The calibration is used to compensate for the variations in voltage + * and temperature that influence the frequency of the internal HSI RC. + * @param __LSITRIMMINGVALUE__ specifies the calibration trimming value + * This parameter must be a number between Min_data=0 and Max_Data=15. + * @retval None + */ +#define __HAL_RCC_LSI_CALIBRATIONVALUE_ADJUST(__LSITRIMMINGVALUE__) LL_RCC_LSI_SetTrimming(__LSITRIMMINGVALUE__) +/** + * @} + */ + +/** @defgroup RCC_HSE_MACROS HSE Macros + * @{ + */ +/** + * @brief Macro to configure the External High Speed oscillator (HSE). + * @note After enabling the HSE (RCC_HSE_ON), the application + * software should wait on HSERDY flag to be set indicating that HSE clock + * is stable and can be used to clock the RC64MPLL. + * @note The HSE is stopped by hardware when entering DEEPSTOP and SHUTDOWN modes. + * @param __STATE__ specifies the new state of the HSE. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_OFF Turn OFF the HSE oscillator. + * @arg @ref RCC_HSE_ON Turn ON the HSE oscillator. + * @retval None + */ +#define __HAL_RCC_HSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_HSE_ON) \ + { \ + LL_RCC_HSE_Enable(); \ + } \ + else \ + { \ + LL_RCC_HSE_Disable(); \ + } \ + } while(0U) + +/** + * @brief Macro to get the HSE ready flag. + * @retval Returns the Ready Flag status + */ +#define __HAL_RCC_GET_HSE_READYFLAG() LL_RCC_HSE_IsReady() + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE). + * @note After enabling the LSE (RCC_LSE_ON), the application + * software should wait on LSERDY flag to be set indicating that LSE clock + * is stable and can be used. + * @param __STATE__ specifies the new state of the LSE. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_OFF Turn OFF the LSE oscillator. + * @arg @ref RCC_LSE_ON Turn ON the LSE oscillator. + * @retval None + */ +#define __HAL_RCC_LSE_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_ON) \ + { \ + LL_RCC_LSE_Enable(); \ + } \ + else \ + { \ + LL_RCC_LSE_Disable(); \ + } \ + } while(0U) + +/** + * @brief Macro to get the LSE ready flag. + * @retval Returns the Ready Flag status + */ +#define __HAL_RCC_GET_LSE_READYFLAG() LL_RCC_LSE_IsReady() + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) in Bypass mode. + * @param __STATE__ specifies the new state of the LSE bypass configuration. + * This parameter can be one of the following values: + * @arg @ref RCC_LSE_BYPASS_OFF Turn OFF the LSE bypass configuration. + * @arg @ref RCC_LSE_BYPASS_ON Turn ON the LSE bypass configuration. + * @retval None + */ +#define __HAL_RCC_LSE_BYPASS_CONFIG(__STATE__) \ + do { \ + if((__STATE__) == RCC_LSE_BYPASS_ON) \ + { \ + LL_RCC_LSE_EnableBypass(); \ + } \ + else \ + { \ + LL_RCC_LSE_DisableBypass(); \ + } \ + } while(0U) + +#if defined(RCC_RFSWHSECR_SATRG) +/** @brief Macros to configure HSE sense amplifier threshold. + * @note to configure HSE sense amplifier, first disable HSE + * using @ref __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF) macro. + * + * @param __HSE_AMPTHRES__ specifies the HSE sense amplifier threshold. + * This parameter can be one of the following values: + * @arg @ref RCC_HSEAMPTHRESHOLD_1_2 HSE bias current factor 1/2. + * @arg @ref RCC_HSEAMPTHRESHOLD_3_4 HSE bias current factor 3/4. + * @retval None + */ +#define __HAL_RCC_HSE_AMPCONFIG(__HSE_AMPTHRES__) LL_RCC_HSE_SetSenseAmplifier(__HSE_AMPTHRES__) +#endif + +/** @brief Macros to configure HSE current control. + * @note to configure HSE current control, first disable HSE + * using @ref __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF) macro. + * + * @param __HSE_CURRENTMAX__ specifies the HSE current max limit. + * This parameter can be one of the following values: + * @arg @ref RCC_HSE_CURRENTMAX_0 HSE current max limit 0.18 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_1 HSE current max limit 0.57 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_2 HSE current max limit 0.78 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_3 HSE current max limit 1.13 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_4 HSE current max limit 0.61 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_5 HSE current max limit 1.65 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_6 HSE current max limit 2.12 mA/V. + * @arg @ref RCC_HSE_CURRENTMAX_7 HSE current max limit 2.84 mA/V. + * @retval None + */ +#define __HAL_RCC_HSE_CURRENTCONFIG(__HSE_CURRENTMAX__) LL_RCC_HSE_SetCurrentControl(__HSE_CURRENTMAX__) + +/** @brief Macros to configure HSE capacitor tuning. + * @note to configure HSE current control, first disable HSE + * using __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF) macro. + * + * @param __HSE_LOAD_CAPACITANCE__ specifies the HSE capacitor value. + * This Value Between Min_Data = 0 and Max_Data = 63 + * @retval None + */ +#define __HAL_RCC_HSE_CAPACITORTUNING(__HSE_LOAD_CAPACITANCE__) LL_RCC_HSE_SetCapacitorTuning(__HSE_LOAD_CAPACITANCE__) + +/** + * @brief Macro to configure the External Low Speed oscillator (LSE) drive capability. + * @param __LSEDRIVE__ specifies the new state of the LSE drive capability. + * This parameter can be one of the following values: + * @arg @ref RCC_LSEDRIVE_LOW LSE oscillator low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMLOW LSE oscillator medium low drive capability. + * @arg @ref RCC_LSEDRIVE_MEDIUMHIGH LSE oscillator medium high drive capability. + * @arg @ref RCC_LSEDRIVE_HIGH LSE oscillator high drive capability. + * @retval None + */ +#define __HAL_RCC_LSEDRIVE_CONFIG(__LSEDRIVE__) LL_RCC_LSE_SetDriveCapability(__LSEDRIVE__) +/** + * @} + */ + +/** @defgroup RCC_CLK_SOURCE_CONFIG_MACROS Clock Source Configuration Macros + * @{ + */ +/** @brief Macros to enable or disable the main RC64MPLL. + * @note After enabling the main RC64MPLL, the application software should wait on + * PLLRDY flag to be set indicating that PLL clock is stable and can + * be used as system clock source. + * @note The main RC64MPLL can not be disabled if it is used as system clock source + * @note The main RC64MPLL is disabled by hardware when entering DEEPSTOP and SHUTDOWN modes. + * @retval None + */ +#define __HAL_RCC_RC64MPLL_ENABLE() LL_RCC_RC64MPLL_Enable() +#define __HAL_RCC_RC64MPLL_DISABLE() LL_RCC_RC64MPLL_Disable() + +/** + * @brief Macro to get the RC64MPLL ready flag. + * @retval Returns the Ready Flag status + */ +#define __HAL_RCC_RC64MPLL_READYFLAG() LL_RCC_RC64MPLL_IsReady() + +/** @brief Macro to configure the RC64MPLL division factor. + * @note This function must be used only when the main RC64MPLL is disabled. + * @param __PLLD__ specifies the division factor + * This parameter must be a value of RCC_RC64MPLL_Clock_Divider. + * @retval None + * + */ +#define __HAL_RCC_RC64MPLL_PRESC_CONFIG(__PLLD__) LL_RCC_SetRC64MPLLPrescaler(__PLLD__) + +/** @brief Macro to configure the DIRERCT HSE division factor. + * @note This function must be used only when the main DIRECT HSE is disabled. + * @param __DIRECTHSED__ specifies the division factor + * This parameter must be a value of RCC_DIRECT_HSE_Clock_Divider. + * @retval None + * + */ +#define __HAL_RCC_DIRECT_HSE_PRESC_CONFIG(__DIRECTHSED__) MODIFY_REG(RCC->CFGR, RCC_CFGR_CLKSYSDIV, __DIRECTHSED__); + + +/** + * @brief Macro to configure the system clock source. + * @param __SYSCLKSOURCE__ specifies the system clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_SYSCLKSOURCE_RC64MPLL RC64PLL configuration is used as system clock source. + * @arg @ref RCC_SYSCLKSOURCE_DIRECT_HSE DIRECT HSE configuration is used as system clock source. + * @retval None + */ +#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ + do { \ + if((__SYSCLKSOURCE__) == RCC_SYSCLKSOURCE_RC64MPLL) \ + { \ + LL_RCC_RC64MPLL_Enable(); \ + } \ + else \ + { \ + LL_RCC_DIRECT_HSE_Enable(); \ + } \ + } while(0U) + +/** @brief Macro to get the clock source used as system clock. + * @retval The clock source used as system clock. The returned value can be one + * of the following: + * @arg @ref RCC_SYSCLKSOURCE_RC64MPLL RC64PLL configuration is used as system clock source.. + * @arg @ref RCC_SYSCLKSOURCE_DIRECT_HSE DIRECT HSE configuration is used as system clock source. + */ +#define __HAL_RCC_GET_SYSCLK_SOURCE() \ + (LL_RCC_DIRECT_HSE_IsEnabled() ? RCC_SYSCLKSOURCE_DIRECT_HSE : RCC_SYSCLKSOURCE_RC64MPLL) + +/** + * @} + */ + +/** @defgroup RCC_MCO_CONFIG_MACROS Main Configurable Clock Output Selection Macros + * @{ + */ +/** + * @brief Macro to configure the MCO clock. + * @param __MCOCLKSOURCE__ specifies the MCO clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_MCOSOURCE_NOCLOCK MCO output disabled + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO source + * @arg @ref RCC_MCOSOURCE_RC64MPLL Main PLL clock selected as MCO source + * @arg @ref RCC_MCOSOURCE_HSI64M_DIV2048 HSI div 2048 clock selected as MCO source + * @arg @ref RCC_MCOSOURCE_SMPS SMPS clock selected as MCO source + * @arg @ref RCC_MCOSOURCE_ADC ADC clock selected as MCO source + + * @param __MCODIV__ specifies the MCO clock prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 MCO clock source is divided by 1 + * @arg @ref RCC_MCODIV_2 MCO clock source is divided by 2 + * @arg @ref RCC_MCODIV_4 MCO clock source is divided by 4 + * @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8 + * @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16 + * @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32 + */ + +#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) LL_RCC_ConfigMCO((__MCOCLKSOURCE__), (__MCODIV__)) +/** + * @} + */ +/** + * @} + */ +/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management + * @brief macros to manage the specified RCC Flags and interrupts. + * @{ + */ + +/** @brief Enable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY LSI ready interrupt enable + * @arg RCC_IT_LSERDY LSE ready interrupt enable + * @arg RCC_IT_HSIRDY HSI ready interrupt enable + * @arg RCC_IT_HSERDY HSE ready interrupt enable + * @arg RCC_IT_PLLRDY Main PLL ready interrupt enable + * @arg RCC_IT_PLL_UNLOCKRDY PLL unlock interrupt enable + * @arg RCC_IT_RTCRSTRELRDY RTC Reset Release ready interrupt enable + * @arg RCC_IT_WDGRSTRELRDY WDG Reset Release ready interrupt enable + * @arg RCC_IT_LPURSTRELRDY LPU Reset Release ready interrupt enable + * @arg RCC_IT_LCDRSTRELRDY LCD Reset Release ready interrupt enable + * @arg RCC_IT_LCSCRSTRELRDY LCSC Reset Release ready interrupt enable + * @retval None + */ +#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Disable RCC interrupt. + * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY LSI ready interrupt disable + * @arg RCC_IT_LSERDY LSE ready interrupt disable + * @arg RCC_IT_HSIRDY HSI ready interrupt disable + * @arg RCC_IT_HSERDY HSE ready interrupt disable + * @arg RCC_IT_PLLRDY Main PLL ready interrupt disable + * @arg RCC_IT_PLL_UNLOCKRDY PLL Unlock interrupt disable + * @arg RCC_IT_RTCRSTRELRDY RTC Reset Release ready interrupt disable + * @arg RCC_IT_WDGRSTRELRDY WDG Reset Release ready interrupt disable + * @arg RCC_IT_LPURSTRELRDY LPU Reset Release ready interrupt disable + * @arg RCC_IT_LCDRSTRELRDY LCD Reset Release ready interrupt disable + * @arg RCC_IT_LCSCRSTRELRDY LCSC Reset Release ready interrupt disable + * @retval None + */ +#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__)) + +/** @brief Clear RCC interrupt pending bits (Perform Byte access to RCC_CICR[17:0] + * bits to clear the selected interrupt pending bits. + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be any combination of the following values: + * @arg RCC_IT_LSIRDY LSI ready interrupt clear + * @arg RCC_IT_LSERDY LSE ready interrupt clear + * @arg RCC_IT_HSIRDY HSI ready interrupt clear + * @arg RCC_IT_HSERDY HSE ready interrupt clear + * @arg RCC_IT_PLLRDY Main PLL ready interrupt clear + * @arg RCC_IT_PLL_UNLOCKRDY PLL Unlock interrupt clear + * @arg RCC_IT_RTCRSTRELRDY RTC Reset Release ready interrupt clear + * @arg RCC_IT_WDGRSTRELRDY WDG Reset Release ready interrupt clear + * @arg RCC_IT_LPURSTRELRDY LPU Reset Release ready interrupt clear + * @arg RCC_IT_LCDRSTRELRDY LCD Reset Release ready interrupt clear + * @arg RCC_IT_LCSCRSTRELRDY LCSC Reset Release ready interrupt clear + */ +#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CIFR = (__INTERRUPT__)) + +/** @brief Check whether the RCC interrupt has occurred or not. + * @param __INTERRUPT__ specifies the RCC interrupt source to check. + * This parameter can be one of the following values: + * @arg RCC_IT_LSIRDY LSI ready interrupt flag + * @arg RCC_IT_LSERDY LSE ready interrupt flag + * @arg RCC_IT_HSIRDY HSI ready interrupt flag + * @arg RCC_IT_HSERDY HSE ready interrupt flag + * @arg RCC_IT_PLLRDY Main PLL ready interrupt flag + * @arg RCC_IT_PLL_UNLOCKRDY PLL Unlock interrupt flag + * @arg RCC_IT_RTCRSTRELRDY RTC Reset Release ready interrupt flag + * @arg RCC_IT_WDGRSTRELRDY WDG Reset Release ready interrupt flag + * @arg RCC_IT_LPURSTRELRDY LPU Reset Release ready interrupt flag + * @arg RCC_IT_LCDRSTRELRDY LCD Reset Release ready interrupt flag + * @arg RCC_IT_LCSCRSTRELRDY LCSC Reset Release ready interrupt flag + * @retval The new state of __INTERRUPT__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__)) +/** + * @} + */ + +/** @defgroup RCC_Reset_Status_Management Rest Status Flags Management + * @brief macros to manage the specified RCC Reset Flags. + * @{ + */ +/** @brief Set RMVF bit to clear the reset flags. + * The reset flags are: RCC_FLAG_LOCKUPRST, RCC_FLAG_WDGRST, RCC_FLAG_SFTRST, + * RCC_FLAG_PORRST and RCC_FLAG_PADRSTF. + * @retval None + */ +#define __HAL_RCC_CLEAR_RESET_FLAGS() LL_RCC_ClearResetFlags() + +/** @brief Check whether the selected RCC Reset flag is set or not. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref RCC_FLAG_LOCKUPRST CPU lockup reset flag + * @arg @ref RCC_FLAG_WDGRST Watchdog reset flag + * @arg @ref RCC_FLAG_SFTRST Software reset flag + * @arg @ref RCC_FLAG_PORRST Power-On or BOR reset flag + * @arg @ref RCC_FLAG_PADRSTF NRSTn pad reset flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_GET_FLAG(__FLAG__) (((__FLAG__) &\ + 0x3FFFF) ? ((RCC->CR & (__FLAG__)) == (__FLAG__)) : ((RCC->CSR & (__FLAG__)) == (__FLAG__))) + +/** + * @} + */ + +/** @defgroup RCC_HSECLK_BUFFER_RF_MACROS External high speed clock buffer for PLL RF2G4 + * @{ + */ +/** @brief Macros to enable or disable the high speed clock buffer for PLL RF2G4. + * @retval Status of the high speed clock buffer for PLL RF2G4 + */ +#define __HAL_RCC_HSEPLLBUFON_ENABLE() LL_RCC_HSEPLLBUFON_Enable() +#define __HAL_RCC_HSEPLLBUFON_DISABLE() LL_RCC_HSEPLLBUFON_Disable() + +/** @brief Macros to read the status of the high speed clock buffer for PLL RF2G4. + * @retval Configuration status + */ +#define __HAL_RCC_HSEPLLBUFON_IS_ENABLED() LL_RCC_HSEPLLBUFON_Disable() +/** + * @} + */ + +/** @defgroup RCC_CLOCK_SWITCH_MACROS Clock switch macros + * @{ + */ +/** @brief Set RC64MPLL prescaler to switch the clock when the MR_BLE is enabled. + * @note The CPU/system frequency must be kept at minimum 16 MHz clock when the radio is used. + * @param __PLLD__ specifies the DIRECT_HSE or RC64MPLL value to setup. + * This parameter can be one of the following values: + * @arg @ref RCC_DIRECT_HSE_SWITCH_DIV1 DIRECT HSE division factor = 1 + * @arg @ref RCC_DIRECT_HSE_SWITCH_DIV2 DIRECT HSE division factor = 2 + * @arg @ref RCC_DIRECT_HSE_SWITCH_DIV3 DIRECT HSE division factor = 3 + * @arg @ref RCC_RC64MPLL_SWITCH_DIV1 RC64MPLL division factor = 1 + * @arg @ref RCC_RC64MPLL_SWITCH_DIV2 RC64MPLL division factor = 2 + * @arg @ref RCC_RC64MPLL_SWITCH_DIV4 RC64MPLL division factor = 4 + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_RCC_CLOCK_SWITCH(__PLLD__) \ + do { \ + if (LL_RCC_GetRC64MPLLSwitchStatus() == LL_RCC_RC64MPLL_SWITCH_STATUS_IDLE) \ + { \ + LL_RCC_SwitchRC64MPLLPrescaler(__PLLD__); \ + LL_RCC_RequestSwitchRC64MPLLClock(); \ + while (LL_RCC_GetRC64MPLLSwitchStatus() != LL_RCC_RC64MPLL_SWITCH_STATUS_DONE); \ + LL_RCC_ClearFlag_EOFSEQ(); \ + } \ + } while(0U) + +/** @brief Macros to enable or disable the interrupt of the CPU / system clock frequency switch. + * @retval Status of the interrupt of the CPU / system clock frequency switch + */ +#define __HAL_RCC_CLOCK_SWITCH_IT_ENABLE() LL_RCC_EnableIT_EOFSEQ() +#define __HAL_RCC_CLOCK_SWITCH_IT_DISABLE() LL_RCC_DisableIT_EOFSEQ() + +/** @brief Macros to read the configuration status of the interrupt of the CPU / system clock frequency switch. + * @retval Interrupt Enable status + */ +#define __HAL_RCC_CLOCK_SWITCH_INTERRUPT_IS_ENABLED() LL_RCC_IsEnabledIT_EOFSEQ() + +/** @brief Macros to read the status of the interrupt of the CPU / system clock frequency switch. + * @retval Interrupt status + */ +#define __HAL_RCC_CLOCK_SWITCH_INTERRUPT_STATUS() LL_RCC_IsActiveFlag_EOFSEQ() + +/** @brief Macros to clear the status of the interrupt of the CPU / system clock frequency switch. + * @retval Clear Interrupt status + */ +#define __HAL_RCC_CLOCK_SWITCH_CLEAR_INTERRUPT_STATUS() LL_RCC_ClearFlag_EOFSEQ() +/** + * @} + */ + +/** + * @} + */ + +/* Include RCC HAL Extended module */ +#include "stm32wl3x_hal_rcc_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_Exported_Functions + * @{ + */ + + +/** @addtogroup RCC_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ******************************/ +HAL_StatusTypeDef HAL_RCC_DeInit(void); +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); + +/** + * @} + */ + +/** @addtogroup RCC_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); +uint32_t HAL_RCC_GetSysClockFreq(void); + +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_RCC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rcc_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rcc_ex.h new file mode 100644 index 0000000000..20a748faac --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rcc_ex.h @@ -0,0 +1,391 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_rcc_ex.h + * @author MCD Application Team + * @brief Header file of RCC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_RCC_EX_H +#define STM32WL3x_HAL_RCC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup RCCEx + * @{ + */ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCCEx_Private_Macros + * @{ + */ + +#define IS_RCC_LSCOSOURCE(__SOURCE__) (((__SOURCE__) == RCC_LSCOSOURCE_NOCLOCK) || \ + ((__SOURCE__) == RCC_LSCOSOURCE_LSI) || \ + ((__SOURCE__) == RCC_LSCOSOURCE_LSE)) + +#define IS_RCC_LSCO(__LSCOX__) ( ((__LSCOX__) == RCC_LSCO1) ||\ + ((__LSCOX__) == RCC_LSCO2) ||\ + ((__LSCOX__) == RCC_LSCO3) ) + +#define RCC_PERIPHCLOCK_ALL ( RCC_PERIPHCLK_SMPS | \ + RCC_PERIPHCLK_RF | \ + RCC_PERIPHCLK_LPUART1 | \ + RCC_PERIPHCLK_SPI3_I2S | \ + RCC_PERIPHCLK_RTC_WDG_SUBG_LPAWUR_LCD_LCSC) + +#define IS_RCC_PERIPHCLOCK(__SELECTION__) ((((__SELECTION__) & RCC_PERIPHCLOCK_ALL) != 0x00u) && \ + (((__SELECTION__) & ~RCC_PERIPHCLOCK_ALL) == 0x00u)) + + +#define IS_RCC_SMPS_CLOCK_PRESC(__PRESC__) \ + ((((__PRESC__) & RCC_SMPSCLK_DIV2) == RCC_SMPSCLK_DIV2) || \ + (((__PRESC__) & RCC_SMPSCLK_DIV4) == RCC_SMPSCLK_DIV4)) + +#define IS_RCC_SPI3I2S_CLOCK_SOURCE(__SOURCE__) \ + ((((__SOURCE__) & RCC_SPI3I2S_CLKSOURCE_CLK_ROOT_DIV) == RCC_SPI3I2S_CLKSOURCE_CLK_ROOT_DIV) || \ + (((__SOURCE__) & RCC_SPI3I2S_CLKSOURCE_CLK_ROOT) == RCC_SPI3I2S_CLKSOURCE_CLK_ROOT) || \ + (((__SOURCE__) & RCC_SPI3I2S_CLKSOURCE_CLK_RC64MPLL) == RCC_SPI3I2S_CLKSOURCE_CLK_RC64MPLL)) + + +#if defined(RCC_CFGR_LPUCLKSEL) +#define IS_RCC_LPUART1_CLOCK_SOURCE(__SOURCE__) \ + ((((__SOURCE__) & RCC_LPUART1_CLKSOURCE_16M) == RCC_LPUART1_CLKSOURCE_16M) || \ + (((__SOURCE__) & RCC_LPUART1_CLKSOURCE_LSE) == RCC_LPUART1_CLKSOURCE_LSE)) +#endif /* RCC_CFGR_LPUCLKSEL */ + +#define IS_RCC_RTC_WDG_SUBG_PAWUR_LCD_LCSC_CLOCK_SOURCE(__SOURCE__) \ + ((((__SOURCE__) & RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_LSE) == RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_LSE) || \ + (((__SOURCE__) & RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_LSI) == RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_LSI) || \ + (((__SOURCE__) & RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_DIV512) == RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_DIV512)) + + +#define IS_RCC_TRIMOSC(__OSC_TYPE__) ((((__OSC_TYPE__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)) + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Types RCCEx Exported Types + * @{ + */ + +/** + * @brief RCC extended clocks structure definition + */ +typedef struct +{ + uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. + This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ + + uint32_t SPI3I2SClockSelection; /*!< Specifies SPI3_I2S clock source. + This parameter can be a value of @ref RCCEx_SPI3_I2S_Clock_Source */ + + uint32_t RTCWDGSUBGLPAWURLCDLCSCClockSelection; /*!< Specifies RTC, WDG and BLEWKUP clock source. + This parameter can be a value of @ref RCCEx_RTC_WDG_BLEWKUP_Clock_Source */ + +#if defined(RCC_CFGR_LPUCLKSEL) + uint32_t LPUART1ClockSelection; /*!< Specifies LPUART1 clock source. + This parameter can be a value of @ref RCCEx_LPUART1_Clock_Source */ +#endif /* RCC_CFGR_LPUCLKSEL */ + + uint32_t SmpsDivSelection; /*!< Specifies SMPS clock prescaling factor. + This parameter can be a value of @ref RCCEx_SMPS_Clock_Divider */ + + uint32_t KRMRateMultiplier; /*!< Specifies KRM rate multiplier. + This parameter can be a value of @ref RCCEx_KRM_Clock_Divider */ +} RCC_PeriphCLKInitTypeDef; + + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants + * @{ + */ + +/** @defgroup RCC_LSCO_Index LSCO Index + * @{ + */ +#define RCC_LSCO1 0x00000000U /*!< LSCO1 index */ +#define RCC_LSCO2 0x00000001U /*!< LSCO2 index */ +#define RCC_LSCO3 0x00000002U /*!< LSCO3 index */ + +/** + * @} + */ + +/** @defgroup RCC_LSCO_Clock_Source LSCO Clock Source + * @{ + */ +#define RCC_LSCOSOURCE_NOCLOCK LL_RCC_LSCOSOURCE_NOCLOCK /*!< LSCO output disabled, no clock on LSCO */ +#define RCC_LSCOSOURCE_LSI LL_RCC_LSCOSOURCE_LSI /*!< LSI selection as LSCO source */ +#define RCC_LSCOSOURCE_LSE LL_RCC_LSCOSOURCE_LSE /*!< LSE selection as LSCO source */ +/** + * @} + */ + + +/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection + * @{ + */ +#define RCC_PERIPHCLK_RF 0x00000001U /*!< RADIO IP Peripheral Clock Selection */ +#define RCC_PERIPHCLK_SMPS 0x00000002U /*!< SMPS Peripheral Clock Selection */ + +#define RCC_PERIPHCLK_SPI3_I2S 0x00000008U /*!< SPI3 I2S Peripheral Clock Selection */ + +#if defined(RCC_CFGR_LPUCLKSEL) +#define RCC_PERIPHCLK_LPUART1 0x00000010U /*!< LPUART1 Peripheral Clock Selection */ +#endif /* RCC_CFGR_LPUCLKSEL */ +#define RCC_PERIPHCLK_RTC_WDG_SUBG_LPAWUR_LCD_LCSC 0x00000020U /*!< RTC WDG SUBG LPAWUR LCD LCSC Peripheral Clock Selection */ +/** + * @} + */ + + +/** @defgroup RCCEx_SPI3_I2S_Clock_Source SPI3_I2S Clock Source + * @{ + */ +#define RCC_SPI3I2S_CLKSOURCE_CLK_ROOT_DIV LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT_DIV /*!< SPI3 I2S 16 MHz clock source selection */ +#define RCC_SPI3I2S_CLKSOURCE_CLK_ROOT LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT /*!< SPI3 I2S 24/32 MHz clock source selection */ +#define RCC_SPI3I2S_CLKSOURCE_CLK_RC64MPLL LL_RCC_SPI3_I2S_CLKSOURCE_CLK_RC64MPLL /*!< SPI3 I2S 64 MHz clock source selection */ +/** + * @} + */ + +#if defined(RCC_CFGR_LPUCLKSEL) +/** @defgroup RCCEx_LPUART1_Clock_Source LPUART1 Clock Source + * @{ + */ +#define RCC_LPUART1_CLKSOURCE_16M LL_RCC_LPUCLKSEL_CLK16M /*!< LPUART1 16 MHz clock source selection */ +#define RCC_LPUART1_CLKSOURCE_LSE LL_RCC_LPUCLKSEL_CLKLSE /*!< LPUART1 LSE clock source selection */ +/** + * @} + */ +#endif /* RCC_CFGR_LPUCLKSEL */ + +/** @defgroup RCCEx_SMPS_Clock_Divider SMPS clock prescaling factor + * @{ + */ +#define RCC_SMPSCLK_DIV2 LL_RCC_SMPS_DIV_2 /*!< SMPS clock division 2 (SMPS clock is 8 MHz if ANADIV = 1)*/ +#define RCC_SMPSCLK_DIV4 LL_RCC_SMPS_DIV_4 /*!< SMPS clock division 4 (SMPS clock is 4 MHz if ANADIV = 1)*/ +/** + * @} + */ +/** @defgroup RCCEx_RTC_WDG_BLEWKUP_Clock_Source RTC, WDG, BLEWKUP Clock Source + * @{ + */ +#define RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_LSE LL_RCC_LSCO_CLKSOURCE_LSE /*!< RTC, WDG and BLEWKUP LSE clock source selection */ +#define RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_LSI LL_RCC_LSCO_CLKSOURCE_LSI /*!< RTC, WDG and BLEWKUP LSI clock source selection */ +#define RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_DIV512 LL_RCC_LSCO_CLKSOURCE_HSI64M_DIV2048 /*!< RTC, WDG and BLEWKUP 32K clock source selection */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros + * @{ + */ + +/** + * @brief Macro to configure the LSCO clock. + * @param __LSCOCLKSOURCE__ specifies the LSCO clock source. + * This parameter can be one of the following values: + * @arg RCC_LSCOSOURCE_NOCLOCK LSCO output disabled + * @arg RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source + * @arg RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source + */ +#define __HAL_RCC_LSCO_CONFIG(__LSCOCLKSOURCE__) LL_RCC_ConfigLSCO((__LSCOCLKSOURCE__)) + +/** @brief Macro to configure the SMPS clock prescaling factor. + * + * @param __SMPSCLKDIV__ specifies the division factor for SMPS clock. + * This parameter can be one of the following values: + * @arg @ref RCC_SMPSCLK_DIV2 SMPS clock division 2 (SMPS clock is 8 MHz) + * @arg @ref RCC_SMPSCLK_DIV4 SMPS clock division 4 (SMPS clock is 4 MHz) + * + * @retval None + */ +#define __HAL_RCC_SMPS_DIV_CONFIG(__SMPSCLKDIV__) LL_RCC_SetSMPSPrescaler(__SMPSCLKDIV__) + +/** @brief Macro to get the SMPS clock prescaling factor. + * + * This parameter can be one of the following values: + * @arg @ref RCC_SMPSCLK_DIV2 SMPS clock division 2 (SMPS clock is 8 MHz) + * @arg @ref RCC_SMPSCLK_DIV4 SMPS clock division 4 (SMPS clock is 4 MHz) + * + */ +#define __HAL_RCC_GET_SMPS_DIV() LL_RCC_GetSMPSPrescaler() + + +/** @brief Macro to configure the KRM rate multiplier. + * @param __KRM_VALUE__ specifies the rate miltiplier + * This parameter can be between Min_Data = 0 and Max_Data = 16 + * + * @retval None + */ +#define __HAL_RCC_KRM_RATE_MULTIPLIER_CONFIG(__KRM_VALUE__) LL_RCC_KRM_SetRateMultiplier(__KRM_VALUE__) + +/** @brief Macro to set the KRM rate multiplier. + * + * @retval Between Min_Data = 0 and Max_Data = 16 + */ +#define __HAL_RCC_GET_KRM_RATE_MULTIPLIER() LL_RCC_KRM_GetRateMultiplier() + +/** @brief Macro to get the KRM rate multiplier. + * + * @retval State of KRM bit (1 or 0) + */ +#define __HAL_RCC_IS_KRM_ENABLED() LL_RCC_KRM_IsEnabled() + +/** @brief Macro to disable KRM. + * + * @retval None + */ +#define __HAL_RCC_KRM_DISABLE() LL_RCC_KRM_Disable() + +/** @brief Macro to enable KRM. + * + * @retval None + */ +#define __HAL_RCC_KRM_ENABLE() LL_RCC_KRM_Enable() + +/** @brief Macro to configure the SPI3_I2S clock. + * + * @param __SPI3I2S_CLK__ specifies the SPI3I2S clock. + * This parameter can be one of the following values: + * @arg @ref RCC_SPI3I2S_CLK_16M + * @arg @ref RCC_SPI3I2S_CLK_32M + * @arg @ref RCC_SPI3I2S_CLK_64M + * @retval None + */ +#define __HAL_RCC_SPI3I2S_CLK_CONFIG(__SPI3I2S_CLK__) LL_RCC_SetSPI3I2SClockSource(__SPI3I2S_CLK__) + +/** @brief Macro to get the SPI3_I2S clock. + * @retval The clock can be one of the following values: + * @arg @ref RCC_SPI3I2S_CLK_16M + * @arg @ref RCC_SPI3I2S_CLK_32M + * @arg @ref RCC_SPI3I2S_CLK_64M + */ +#define __HAL_RCC_GET_SPI3I2S_CLK_CONFIG() LL_RCC_GetSPI3I2SClockSource() + +/** + * @} + */ + +#if defined(RCC_CFGR_LPUCLKSEL) +/** @brief Macro to configure the LPUART1 clock. + * + * @param __LPUART1_CLKSOURCE__ specifies the LPUART1 clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_LPUART1_CLKSOURCE_16M + * @arg @ref RCC_LPUART1_CLKSOURCE_LSE + * @retval None + */ +#define __HAL_RCC_LPUART1_CLK_CONFIG(__LPUART1_CLKSOURCE__) LL_RCC_SetLPUARTClockSource(__LPUART1_CLKSOURCE__) + +/** @brief Macro to get the LPUART1 clock source. + * @retval The clock source can be one of the following values: + * @arg @ref RCC_LPUART1_CLKSOURCE_16M + * @arg @ref RCC_LPUART1_CLKSOURCE_LSE + */ +#define __HAL_RCC_GET_LPUART1_CLK_CONFIG() LL_RCC_GetLPUARTClockSource() +#endif /* RCC_CFGR_LPUCLKSEL */ + +/** @brief Macro to configure the RTC, WDG, SUBG, LPAWUR, LCD and LCSC clock source. + * + * @param __CLKSOURCE__ specifies the RTC, WDG, SUBG, LPAWUR, LCD and LCSC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_LSE + * @arg @ref RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_LSI + * @arg @ref RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_DIV512 + * @retval None + */ +#define __HAL_RCC_RTC_SUBG_LPAWUR_LCD_LCSC_CLK_CONFIG( __CLKSOURCE__ ) LL_RCC_LSCO_SetSource( __CLKSOURCE__ ) + +/** @brief Macro to get the RTC, WDG, SUBG, LPAWUR, LCD and LCSC clock source. + * + * @retval The RTC, WDG, SUBG, LPAWUR, LCD and LCSC clock source. + * This parameter can be one of the following values: + * @arg @ref RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_LSE + * @arg @ref RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_LSI + * @arg @ref RCC_RTC_WDG_SUBG_LPAWUR_LCD_LCSC_CLKSOURCE_DIV512 + */ +#define __HAL_RCC_GET_RTC_SUBG_LPAWUR_LCD_LCSC_CLK_CONFIG() LL_RCC_LSCO_GetSource() + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCCEx_Exported_Functions + * @{ + */ + +/** @addtogroup RCCEx_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); + +/** + * @} + */ + +/** @addtogroup RCCEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_RCCEx_LSCOConfig(uint32_t RCC_LSCOx, uint32_t RCC_LSCOSource); +void HAL_RCCEx_DisableLSCO(void); +void HAL_RCCEx_EnableLSCOinDEEPSTOP(uint32_t LSCOSource); + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_RCC_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rng.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rng.h new file mode 100644 index 0000000000..c0ee257b47 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rng.h @@ -0,0 +1,290 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_rng.h + * @author MCD Application Team + * @brief Header file of RNG HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_RNG_H +#define STM32WL3x_HAL_RNG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +#if defined (RNG) + +/** @defgroup RNG RNG + * @brief RNG HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RNG_Exported_Types RNG Exported Types + * @{ + */ + +/** @defgroup RNG_Exported_Types_Group1 RNG Init Structure definition + * @{ + */ +typedef struct +{ + uint32_t ClockErrorDetection; /*!< CED Clock error detection not use for WB09 product */ +} RNG_InitTypeDef; + +/** + * @} + */ + +/** @defgroup RNG_Exported_Types_Group2 RNG State Structure definition + * @{ + */ +typedef enum +{ + HAL_RNG_STATE_RESET = 0x00U, /*!< RNG not yet initialized or disabled */ + HAL_RNG_STATE_READY = 0x01U, /*!< RNG initialized and ready for use */ + HAL_RNG_STATE_BUSY = 0x02U, /*!< RNG internal process is ongoing */ + HAL_RNG_STATE_TIMEOUT = 0x03U, /*!< RNG timeout state */ + HAL_RNG_STATE_ERROR = 0x04U /*!< RNG error state */ + +} HAL_RNG_StateTypeDef; + +/** + * @} + */ + +/** @defgroup RNG_Exported_Types_Group3 RNG Handle Structure definition + * @{ + */ +typedef struct +{ + RNG_TypeDef *Instance; /*!< Register base address */ + + RNG_InitTypeDef Init; /*!< RNG configuration parameters */ + + HAL_LockTypeDef Lock; /*!< RNG locking object */ + + __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */ + + __IO uint32_t ErrorCode; /*!< RNG Error code */ + + uint32_t RandomNumber; /*!< Last Generated RNG Data */ + +} RNG_HandleTypeDef; + +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RNG_Exported_Constants_Group1 RNG Flag definition + * @{ + */ +#if defined (RNG_SR_RNGRDY) +#define RNG_FLAG_DRDY RNG_SR_RNGRDY /*!< New Random Data Ready */ +#else +#define RNG_FLAG_DRDY RNG_SR_VAL_READY /*!< New Random Data Ready */ +#endif /*RNG_SR_RNGRDY*/ +#if defined (RNG_SR_REVCLK) +#define RNG_FLAG_REVCLK RNG_SR_REVCLK /*!< Clock Detection flag */ +#endif /*RNG_SR_REVCLK*/ +#if defined (RNG_SR_FAULT) +#define RNG_FLAG_FAULT RNG_SR_FAULT /*!< Fault flag */ +#endif /*RNG_SR_FAULT*/ +/** + * @} + */ +/** @defgroup RNG_Exported_Constants_Group2 RNG Clock Error Detection + * @{ + */ +#if defined (RNG_CR_TST_CLK) +#define RNG_CED_DISABLE 0x00000000U /*!< Clock error detection Disabled */ +#define RNG_CED_ENABLE RNG_CR_TST_CLK /*!< Clock error detection Enabled */ +#endif /*RNG_CR_TST_CLK*/ + +/** @defgroup RNG_Error_Definition RNG Error Definition + * @{ + */ +#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */ +#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */ +#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */ +#if defined (RNG_CR_TST_CLK) +#define HAL_RNG_ERROR_SEQUENCE 0x00000001U /*!< This bit is set by hardware when a faulty sequence of bits occurs */ +#endif /* RNG_CR_TST_CLK */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup RNG_Exported_Macros RNG Exported Macros + * @{ + */ + +/** @brief Reset RNG handle state + * @param __HANDLE__ RNG Handle + * @retval None + */ +#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET) + +/** + * @brief Enables the RNG peripheral. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#if defined (RNG_CR_RNG_DIS) +#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNG_DIS) +#else +#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_DISABLE) +#endif /* RNG_CR_RNG_DIS */ + +/** + * @brief Disables the RNG peripheral. + * @param __HANDLE__ RNG Handle + * @retval None + */ +#if defined (RNG_CR_RNG_DIS) +#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNG_DIS) +#else +#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_DISABLE) +#endif /* RNG_CR_RNG_DIS */ + +/** + * @brief Check the selected RNG flag status. + * @param __HANDLE__ RNG Handle + * @param __FLAG__ RNG flag + * This parameter can be one of the following values: + * @arg RNG_FLAG_DRDY: Data ready + * @arg RNG_FLAG_CECS: Clock error current status + * @arg RNG_FLAG_SECS: Seed error current status + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) + +#if defined (RNG_SR_FAULT) +/** + * @brief Clears the selected RNG flag status. + * @param __HANDLE__ RNG handle + * @param __FLAG__ RNG flag to clear + * @note WARNING: This macro clear only RNG_FLAG_FAULT flag because + * flags RNG_FLAG_DRDY and RNG_FLAG_REVCLK are read-only. + * @retval None + */ +#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) (if((__FLAG__)\ + == RNG_FLAG_FAULT) (__HANDLE__)->Instance->SR = RNG_FLAG_FAULT) +#endif /* RNG_SR_FAULT */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RNG_Exported_Functions RNG Exported Functions + * @{ + */ + +/** @defgroup RNG_Exported_Functions_Group1 Initialization and configuration functions + * @{ + */ +HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng); +HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng); +void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng); +void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng); + +/** + * @} + */ + +/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random_number); +uint32_t HAL_RNG_ReadLastRandomNumber(const RNG_HandleTypeDef *hrng); + +/** + * @} + */ + +/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions + * @{ + */ +HAL_RNG_StateTypeDef HAL_RNG_GetState(const RNG_HandleTypeDef *hrng); +uint32_t HAL_RNG_GetError(const RNG_HandleTypeDef *hrng); +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RNG_Private_Macros RNG Private Macros + * @{ + */ +#if defined (RNG_SR_FAULT) +#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \ + ((FLAG) == RNG_FLAG_REVCLK) || \ + ((FLAG) == RNG_FLAG_FAULT)) +#else +#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) +#endif /* RNG_SR_FAULT */ + +#if defined(RNG_CR_TST_CLK) +/** + * @brief Verify the RNG Clock Error Detection mode. + * @param __MODE__ RNG Clock Error Detection mode + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_RNG_CED(__MODE__) (((__MODE__) == RNG_CED_ENABLE) || \ + ((__MODE__) == RNG_CED_DISABLE)) +#endif /* RNG_CR_TST_CLK */ +/** + * @} + */ + +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32WL3x_HAL_RNG_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rtc.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rtc.h new file mode 100644 index 0000000000..7208bd9bb8 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rtc.h @@ -0,0 +1,813 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_rtc.h + * @author MCD Application Team + * @brief Header file of RTC HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_RTC_H +#define STM32WL3x_HAL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ + +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RTC_Exported_Types RTC Exported Types + * @{ + */ + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */ + HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */ + HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */ + HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */ + HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */ +} HAL_RTCStateTypeDef; + +/** + * @brief RTC Configuration Structure definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hour Format. + This parameter can be a value of @ref RTC_Hour_Formats */ + + uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ + + uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x7FFF */ + + uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output. + This parameter can be a value of @ref RTC_Output_selection_Definitions */ + + uint32_t OutPutRemap; /*!< Specifies the remap for RTC output. + This parameter can be a value of @ref RTC_Output_ALARM_OUT_Remap */ + + uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal. + This parameter can be a value of @ref RTC_Output_Polarity_Definitions */ + + uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode. + This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */ +} RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t Hours; /*!< Specifies the RTC Time Hour. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected + This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ + + uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_AM_PM_Definitions */ + + uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content. + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity */ + + uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content + corresponding to Synchronous prescaler factor value (PREDIV_S) + This parameter corresponds to a time unit range between [0-1] Second + with [1 Sec / SecondFraction +1] granularity. + This field will be used only by HAL_RTC_GetTime function */ + + uint32_t DayLightSaving; /*!< This interface is deprecated. To manage Daylight + Saving Time, please use HAL_RTC_DST_xxx functions */ + + uint32_t StoreOperation; /*!< This interface is deprecated. To manage Daylight + Saving Time, please use HAL_RTC_DST_xxx functions */ +} RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t Date; /*!< Specifies the RTC Date. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ + +} RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_AlarmMask_Definitions */ + + uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks. + This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. + This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. + If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range. + If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint32_t Alarm; /*!< Specifies the alarm . + This parameter can be a value of @ref RTC_Alarms_Definitions */ +} RTC_AlarmTypeDef; + +/** + * @brief RTC Handle Structure definition + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +typedef struct __RTC_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ +{ + RTC_TypeDef *Instance; /*!< Register base address */ + + RTC_InitTypeDef Init; /*!< RTC required parameters */ + + HAL_LockTypeDef Lock; /*!< RTC locking object */ + + __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + void (* AlarmAEventCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm A Event callback */ + + void (* TimeStampEventCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Timestamp Event callback */ + + void (* WakeUpTimerEventCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC WakeUpTimer Event callback */ + + void (* Tamper1EventCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 1 Event callback */ + + void (* MspInitCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp Init callback */ + + void (* MspDeInitCallback) (struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp DeInit callback */ + +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +} RTC_HandleTypeDef; + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief HAL RTC Callback ID enumeration definition + */ +typedef enum +{ + HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00U, /*!< RTC Alarm A Event Callback ID */ + HAL_RTC_TIMESTAMP_EVENT_CB_ID = 0x02U, /*!< RTC Timestamp Event Callback ID */ + HAL_RTC_WAKEUPTIMER_EVENT_CB_ID = 0x03U, /*!< RTC Wakeup Timer Event Callback ID */ + HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04U, /*!< RTC Tamper 1 Callback ID */ + HAL_RTC_MSPINIT_CB_ID = 0x0EU, /*!< RTC Msp Init callback ID */ + HAL_RTC_MSPDEINIT_CB_ID = 0x0FU /*!< RTC Msp DeInit callback ID */ +} HAL_RTC_CallbackIDTypeDef; + +/** + * @brief HAL RTC Callback pointer definition + */ +typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to an RTC callback function */ +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RTC_Exported_Constants RTC Exported Constants + * @{ + */ + +/** @defgroup RTC_Hour_Formats RTC Hour Formats + * @{ + */ +#define RTC_HOURFORMAT_24 0x00000000U +#define RTC_HOURFORMAT_12 RTC_CR_FMT +/** + * @} + */ + +/** @defgroup RTC_Output_selection_Definitions RTC Output Selection Definitions + * @{ + */ +#define RTC_OUTPUT_DISABLE 0x00000000U +#define RTC_OUTPUT_ALARMA RTC_CR_OSEL_0 +#define RTC_OUTPUT_WAKEUP RTC_CR_OSEL +/** + * @} + */ + +/** @defgroup RTC_Output_ALARM_OUT_Remap RTC Output ALARM OUT Remap + * @{ + */ +#define RTC_OUTPUT_REMAP_NONE 0x00000000U +#define RTC_OUTPUT_REMAP_POS1 RTC_OR_OUT_RMP +/** + * @} + */ + +/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions + * @{ + */ +#define RTC_OUTPUT_POLARITY_HIGH 0x00000000U +#define RTC_OUTPUT_POLARITY_LOW RTC_CR_POL +/** + * @} + */ + +/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT + * @{ + */ +#define RTC_OUTPUT_TYPE_OPENDRAIN 0x00000000U +#define RTC_OUTPUT_TYPE_PUSHPULL RTC_OR_ALARMOUTTYPE +/** + * @} + */ + +/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions + * @{ + */ +#define RTC_HOURFORMAT12_AM ((uint8_t)0x00) +#define RTC_HOURFORMAT12_PM ((uint8_t)0x01) +/** + * @} + */ + +/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions + * @{ + */ +#define RTC_DAYLIGHTSAVING_SUB1H RTC_CR_SUB1H +#define RTC_DAYLIGHTSAVING_ADD1H RTC_CR_ADD1H +#define RTC_DAYLIGHTSAVING_NONE 0x00000000U +/** + * @} + */ + +/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions + * @{ + */ +#define RTC_STOREOPERATION_RESET 0x00000000U +#define RTC_STOREOPERATION_SET RTC_CR_BKP +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions + * @{ + */ +#define RTC_FORMAT_BIN 0x00000000U +#define RTC_FORMAT_BCD 0x00000001U +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions (in BCD format) + * @{ + */ +#define RTC_MONTH_JANUARY ((uint8_t)0x01) +#define RTC_MONTH_FEBRUARY ((uint8_t)0x02) +#define RTC_MONTH_MARCH ((uint8_t)0x03) +#define RTC_MONTH_APRIL ((uint8_t)0x04) +#define RTC_MONTH_MAY ((uint8_t)0x05) +#define RTC_MONTH_JUNE ((uint8_t)0x06) +#define RTC_MONTH_JULY ((uint8_t)0x07) +#define RTC_MONTH_AUGUST ((uint8_t)0x08) +#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09) +#define RTC_MONTH_OCTOBER ((uint8_t)0x10) +#define RTC_MONTH_NOVEMBER ((uint8_t)0x11) +#define RTC_MONTH_DECEMBER ((uint8_t)0x12) +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions + * @{ + */ +#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01) +#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02) +#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03) +#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04) +#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05) +#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06) +#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07) +/** + * @} + */ + +/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions + * @{ + */ +#define RTC_ALARMDATEWEEKDAYSEL_DATE 0x00000000U +#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL +/** + * @} + */ + +/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions + * @{ + */ +#define RTC_ALARMMASK_NONE 0x00000000U +#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4 +#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3 +#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2 +#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1 +#define RTC_ALARMMASK_ALL (RTC_ALARMMASK_DATEWEEKDAY | \ + RTC_ALARMMASK_HOURS | \ + RTC_ALARMMASK_MINUTES | \ + RTC_ALARMMASK_SECONDS) +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions + * @{ + */ +#define RTC_ALARM_A RTC_CR_ALRAE +/** + * @} + */ + +/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions + * @{ + */ +/*!< All Alarm SS fields are masked. There is no comparison on sub seconds for Alarm */ +#define RTC_ALARMSUBSECONDMASK_ALL 0x00000000U +/*!< SS[14:1] are don't care in Alarm comparison. Only SS[0] is compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_1 RTC_ALRMASSR_MASKSS_0 +/*!< SS[14:2] are don't care in Alarm comparison. Only SS[1:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_2 RTC_ALRMASSR_MASKSS_1 +/*!< SS[14:3] are don't care in Alarm comparison. Only SS[2:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_3 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1) +/*!< SS[14:4] are don't care in Alarm comparison. Only SS[3:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_4 RTC_ALRMASSR_MASKSS_2 +/*!< SS[14:5] are don't care in Alarm comparison. Only SS[4:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_5 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2) +/*!< SS[14:6] are don't care in Alarm comparison. Only SS[5:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_6 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) +/*!< SS[14:7] are don't care in Alarm comparison. Only SS[6:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_7 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2) +/*!< SS[14:8] are don't care in Alarm comparison. Only SS[7:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_8 RTC_ALRMASSR_MASKSS_3 +/*!< SS[14:9] are don't care in Alarm comparison. Only SS[8:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_9 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_3) +/*!< SS[14:10] are don't care in Alarm comparison. Only SS[9:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_10 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) +/*!< SS[14:11] are don't care in Alarm comparison. Only SS[10:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_11 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_3) +/*!< SS[14:12] are don't care in Alarm comparison. Only SS[11:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_12 (RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) +/*!< SS[14:13] are don't care in Alarm comparison. Only SS[12:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14_13 (RTC_ALRMASSR_MASKSS_0 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) +/*!< SS[14] is don't care in Alarm comparison. Only SS[13:0] are compared. */ +#define RTC_ALARMSUBSECONDMASK_SS14 (RTC_ALRMASSR_MASKSS_1 | RTC_ALRMASSR_MASKSS_2 | RTC_ALRMASSR_MASKSS_3) +/*!< SS[14:0] are compared and must match to activate alarm. */ +#define RTC_ALARMSUBSECONDMASK_NONE RTC_ALRMASSR_MASKSS +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions + * @{ + */ +#define RTC_IT_TS RTC_CR_TSIE /*!< Enable Timestamp Interrupt */ +#define RTC_IT_WUT RTC_CR_WUTIE /*!< Enable Wakeup timer Interrupt */ +#define RTC_IT_ALRA RTC_CR_ALRAIE /*!< Enable Alarm A Interrupt */ +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions RTC Flags Definitions + * @{ + */ +#define RTC_FLAG_RECALPF RTC_ISR_RECALPF /*!< Recalibration pending flag */ +#define RTC_FLAG_TAMP1F RTC_ISR_TAMP1F /*!< Tamper 1 event flag */ +#define RTC_FLAG_TSOVF RTC_ISR_TSOVF /*!< Timestamp overflow flag */ +#define RTC_FLAG_TSF RTC_ISR_TSF /*!< Timestamp event flag */ +#define RTC_FLAG_ITSF RTC_ISR_ITSF /*!< Internal Timestamp event flag */ +#define RTC_FLAG_WUTF RTC_ISR_WUTF /*!< Wakeup timer event flag */ +#define RTC_FLAG_ALRAF RTC_ISR_ALRAF /*!< Alarm A event flag */ +#define RTC_FLAG_INITF RTC_ISR_INITF /*!< RTC in initialization mode flag */ +#define RTC_FLAG_RSF RTC_ISR_RSF /*!< Register synchronization flag */ +#define RTC_FLAG_INITS RTC_ISR_INITS /*!< RTC initialization status flag */ +#define RTC_FLAG_SHPF RTC_ISR_SHPF /*!< Shift operation pending flag */ +#define RTC_FLAG_WUTWF RTC_ISR_WUTWF /*!< WUTR register write allowance flag */ +#define RTC_FLAG_ALRAWF RTC_ISR_ALRAWF /*!< ALRMAR register write allowance flag */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RTC_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @brief Reset RTC handle state + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_RTC_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Disable the write protection for RTC registers. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) do { \ + (__HANDLE__)->Instance->WPR = 0xCAU; \ + (__HANDLE__)->Instance->WPR = 0x53U; \ + } while(0U) + +/** + * @brief Enable the write protection for RTC registers. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) do { \ + (__HANDLE__)->Instance->WPR = 0xFFU; \ + } while(0U) + +/** + * @brief Check whether the RTC Calendar is initialized. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_IS_CALENDAR_INITIALIZED(__HANDLE__) (((((__HANDLE__)->Instance->ISR) & (RTC_FLAG_INITS)) == RTC_FLAG_INITS) ? 1U : 0U) + +/** + * @brief Enable the RTC ALARMA peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE)) + +/** + * @brief Disable the RTC ALARMA peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE)) + +/** + * @brief Enable the RTC Alarm interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC Alarm interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Alarm interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt to check. + * This parameter can be: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC Alarm's flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Alarm Flag to check. + * This parameter can be: + * @arg RTC_FLAG_ALRAF: Alarm A interrupt flag + * @arg RTC_FLAG_ALRAWF: Alarm A 'write allowed' flag + * @retval None + */ +#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) + +/** + * @brief Clear the RTC Alarm's pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Alarm flag to be cleared. + * This parameter can be: + * @arg RTC_FLAG_ALRAF + * @retval None + */ +#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) + +/** + * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Alarm interrupt sources to check. + * This parameter can be: + * @arg RTC_IT_ALRA: Alarm A interrupt + * @retval None + */ +#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @} + */ + +/* Include RTC HAL Extended module */ +#include "stm32wl3x_hal_rtc_ex.h" + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RTC_Exported_Functions + * @{ + */ + +/** @addtogroup RTC_Exported_Functions_Group1 + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); +void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group2 + * @{ + */ +/* RTC Time and Date functions ************************************************/ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group3 + * @{ + */ +/* RTC Alarm functions ********************************************************/ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format); +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group4 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc); + +/* RTC Daylight Saving Time functions *****************************************/ +void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc); +void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc); +void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc); +void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc); +uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** @addtogroup RTC_Exported_Functions_Group5 + * @{ + */ +/* Peripheral State functions *************************************************/ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ + +/** @defgroup RTC_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_TR_RESERVED_MASK ((uint32_t)(RTC_TR_HT | RTC_TR_HU | \ + RTC_TR_MNT | RTC_TR_MNU | \ + RTC_TR_ST | RTC_TR_SU | \ + RTC_TR_PM)) +#define RTC_DR_RESERVED_MASK ((uint32_t)(RTC_DR_YT | RTC_DR_YU | \ + RTC_DR_MT | RTC_DR_MU | \ + RTC_DR_DT | RTC_DR_DU | \ + RTC_DR_WDU)) +#define RTC_ISR_RESERVED_MASK ((uint32_t)(RTC_FLAGS_MASK | RTC_ISR_INIT)) +#define RTC_INIT_MASK 0xFFFFFFFFU +#define RTC_RSF_MASK ((uint32_t)~(RTC_ISR_INIT | RTC_ISR_RSF)) +#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_INITF | RTC_FLAG_INITS | \ + RTC_FLAG_ALRAF | RTC_FLAG_ALRAWF | \ + RTC_FLAG_WUTF | RTC_FLAG_WUTWF | \ + RTC_FLAG_RECALPF | RTC_FLAG_SHPF | \ + RTC_FLAG_TSF | RTC_FLAG_TSOVF | \ + RTC_FLAG_RSF | RTC_TAMPER_FLAGS_MASK)) + +#define RTC_TIMEOUT_VALUE 1000U + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup RTC_Private_Macros RTC Private Macros + * @{ + */ + +/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters + * @{ + */ +#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \ + ((FORMAT) == RTC_HOURFORMAT_24)) + +#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ + ((OUTPUT) == RTC_OUTPUT_ALARMA) || \ + ((OUTPUT) == RTC_OUTPUT_WAKEUP)) + +#define IS_RTC_OUTPUT_REMAP(REMAP) (((REMAP) == RTC_OUTPUT_REMAP_NONE) || \ + ((REMAP) == RTC_OUTPUT_REMAP_POS1)) + +#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \ + ((POL) == RTC_OUTPUT_POLARITY_LOW)) + +#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \ + ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL)) + +#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FU) +#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFFU) + +#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0U) && ((HOUR) <= 12U)) +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23U) +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59U) +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59U) + +#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || \ + ((PM) == RTC_HOURFORMAT12_PM)) + +#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \ + ((SAVE) == RTC_DAYLIGHTSAVING_NONE)) + +#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \ + ((OPERATION) == RTC_STOREOPERATION_SET)) + +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD)) + +#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99U) +#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1U) && ((MONTH) <= 12U)) +#define IS_RTC_DATE(DATE) (((DATE) >= 1U) && ((DATE) <= 31U)) + +#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0U) && ((DATE) <= 31U)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ + ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) + +#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \ + ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY)) + +#define IS_RTC_ALARM_MASK(MASK) (((MASK) & ((uint32_t)~RTC_ALARMMASK_ALL)) == 0U) + +#define IS_RTC_ALARM(ALARM) ((ALARM) == RTC_ALARM_A) + +#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= RTC_ALRMASSR_SS) + +#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \ + ((MASK) == RTC_ALARMSUBSECONDMASK_NONE)) +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup RTC_Private_Functions RTC Private Functions + * @{ + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc); +uint8_t RTC_ByteToBcd2(uint8_t number); +uint8_t RTC_Bcd2ToByte(uint8_t number); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_RTC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rtc_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rtc_ex.h new file mode 100644 index 0000000000..58d3915aff --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_rtc_ex.h @@ -0,0 +1,829 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_rtc_ex.h + * @author MCD Application Team + * @brief Header file of RTC HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_RTC_EX_H +#define STM32WL3x_HAL_RTC_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ + +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup RTCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup RTCEx_Exported_Types RTCEx Exported Types + * @{ + */ + +/** + * @brief RTC Tamper structure definition + */ +typedef struct +{ + uint32_t Tamper; /*!< Specifies the Tamper Pin. + This parameter can be a value of @ref RTCEx_Tamper_Pin_Definitions */ + + uint32_t Interrupt; /*!< Specifies the Tamper Interrupt. + This parameter can be a value of @ref RTCEx_Tamper_Interrupt_Definitions */ + + uint32_t Trigger; /*!< Specifies the Tamper Trigger. + This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ + + uint32_t NoErase; /*!< Specifies the Tamper no erase mode. + This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp_Definitions */ + + uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. + This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions */ + + uint32_t Filter; /*!< Specifies the RTC Filter Tamper. + This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ + + uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. + This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ + + uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . + This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ + + uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . + This parameter can be a value of @ref RTCEx_Tamper_Pull_Up_Definitions */ + + uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. + This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ +} RTC_TamperTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants + * @{ + */ + +/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definitions + * @{ + */ +#define RTC_BKP_DR0 0x00000000U +#define RTC_BKP_DR1 0x00000001U +/** + * @} + */ + +/** @defgroup RTCEx_Timestamp_Edges_Definitions RTCEx Timestamp Edges Definitions + * @{ + */ +#define RTC_TIMESTAMPEDGE_RISING 0x00000000U +#define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE +/** + * @} + */ + +/** @defgroup RTCEx_Timestamp_Pin_Selection RTC Timestamp Pin Selection + * @{ + */ +#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000U +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pin_Definitions RTCEx Tamper Pins Definitions + * @{ + */ +#define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pin_Selection RTC tamper Pins Selection + * @{ + */ +#define RTC_TAMPERPIN_DEFAULT 0x00000000U +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTCEx Tamper Interrupt Definitions + * @{ + */ +#define RTC_IT_TAMP RTC_TAMPCR_TAMPIE /*!< Enable global Tamper Interrupt */ +#define RTC_IT_TAMP1 RTC_TAMPCR_TAMP1IE /*!< Enable Tamper 1 Interrupt */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Triggers Definitions + * @{ + */ +#define RTC_TAMPERTRIGGER_RISINGEDGE 0x00000000U +#define RTC_TAMPERTRIGGER_FALLINGEDGE 0x00000002U +#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE +#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTCEx Tamper EraseBackUp Definitions + * @{ + */ +#define RTC_TAMPER_ERASE_BACKUP_ENABLE 0x00000000U +#define RTC_TAMPER_ERASE_BACKUP_DISABLE 0x00020000U +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTCEx Tamper MaskFlag Definitions + * @{ + */ +#define RTC_TAMPERMASK_FLAG_DISABLE 0x00000000U +#define RTC_TAMPERMASK_FLAG_ENABLE 0x00040000U +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions + * @{ + */ +#define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ + +#define RTC_TAMPERFILTER_2SAMPLE RTC_TAMPCR_TAMPFLT_0 /*!< Tamper is activated after 2 + consecutive samples at the active level */ +#define RTC_TAMPERFILTER_4SAMPLE RTC_TAMPCR_TAMPFLT_1 /*!< Tamper is activated after 4 + consecutive samples at the active level */ +#define RTC_TAMPERFILTER_8SAMPLE RTC_TAMPCR_TAMPFLT /*!< Tamper is activated after 8 + consecutive samples at the active level */ +#define RTC_TAMPERFILTER_MASK RTC_TAMPCR_TAMPFLT /*!< Masking all bits except those of + field TAMPFLT */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions + * @{ + */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 32768 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 RTC_TAMPCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 16384 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 RTC_TAMPCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 8192 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 4096 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 RTC_TAMPCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 2048 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 1024 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (RTC_TAMPCR_TAMPFREQ_1 | RTC_TAMPCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 512 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 RTC_TAMPCR_TAMPFREQ /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 256 */ +#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK RTC_TAMPCR_TAMPFREQ /*!< Masking all bits except those of + field TAMPFREQ */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions + * @{ + */ +#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before + sampling during 1 RTCCLK cycle */ +#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK RTC_TAMPCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before + sampling during 2 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK RTC_TAMPCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before + sampling during 4 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK RTC_TAMPCR_TAMPPRCH /*!< Tamper pins are pre-charged before + sampling during 8 RTCCLK cycles */ +#define RTC_TAMPERPRECHARGEDURATION_MASK RTC_TAMPCR_TAMPPRCH /*!< Masking all bits except those of + field TAMPPRCH */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_Pull_Up_Definitions RTCEx Tamper Pull Up Definitions + * @{ + */ +#define RTC_TAMPER_PULLUP_ENABLE 0x00000000U /*!< Tamper pins are pre-charged before sampling */ +#define RTC_TAMPER_PULLUP_DISABLE RTC_TAMPCR_TAMPPUDIS /*!< Tamper pins are not pre-charged before sampling */ +#define RTC_TAMPER_PULLUP_MASK RTC_TAMPCR_TAMPPUDIS /*!< Masking all bits except bit TAMPPUDIS */ +/** + * @} + */ + +/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStamp On Tamper Detection Definitions + * @{ + */ +#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_TAMPCR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ +#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U /*!< TimeStamp on Tamper Detection event is not saved */ +#define RTC_TIMESTAMPONTAMPERDETECTION_MASK RTC_TAMPCR_TAMPTS /*!< Masking all bits except bit TAMPTS */ +/** + * @} + */ + +/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions + * @{ + */ +#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000U +#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0 +#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1 +#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1) +#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2 +#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2) +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth Calib Period Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000U /*!< If RTCCLK = 32768 Hz, smooth calibration + period is 32s, otherwise 2^20 RTCCLK pulses */ +#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, smooth calibration + period is 16s, otherwise 2^19 RTCCLK pulses */ +#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, smooth calibration + period is 8s, otherwise 2^18 RTCCLK pulses */ +/** + * @} + */ + +/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth Calib Plus Pulses Definitions + * @{ + */ +#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added + during a X -second window = Y - CALM[8:0] + with Y = 512, 256, 128 when X = 32, 16, 8 */ +#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000U /*!< The number of RTCCLK pulses subbstited + during a 32-second window = CALM[8:0] */ +/** + * @} + */ + +/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTCEx Add 1 Second Parameter Definitions + * @{ + */ +#define RTC_SHIFTADD1S_RESET 0x00000000U +#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S +/** + * @} + */ + +/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output Selection Definitions + * @{ + */ +#define RTC_CALIBOUTPUT_512HZ 0x00000000U +#define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros + * @{ + */ + +/* ---------------------------------WAKEUPTIMER-------------------------------*/ + +/** @defgroup RTCEx_WakeUp_Timer RTCEx WakeUp Timer + * @{ + */ + +/** + * @brief Enable the RTC WakeUp Timer peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) + +/** + * @brief Disable the RTC Wakeup Timer peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) + +/** + * @brief Enable the RTC Wakeup Timer interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Wakeup Timer interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_WUT: Wakeup Timer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC Wakeup Timer interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Wakeup Timer interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_WUT: Wakeup Timer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Wakeup Timer interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Wakeup Timer interrupt to check. + * This parameter can be: + * @arg RTC_IT_WUT: Wakeup Timer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U) + +/** + * @brief Check whether the specified RTC Wakeup timer interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Wakeup timer interrupt sources to check. + * This parameter can be: + * @arg RTC_IT_WUT: WakeUpTimer interrupt + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC Wakeup Timer's flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Wakeup Timer flag to check. + * This parameter can be: + * @arg RTC_FLAG_WUTF: Wakeup Timer interrupt flag + * @arg RTC_FLAG_WUTWF: Wakeup Timer 'write allowed' flag + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U) + +/** + * @brief Clear the RTC Wakeup timer's pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Wakeup Timer Flag to clear. + * This parameter can be: + * @arg RTC_FLAG_WUTF: Wakeup Timer interrupt Flag + * @retval None + */ +#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) + +/** + * @} + */ + +/* ---------------------------------TIMESTAMP---------------------------------*/ + +/** @defgroup RTCEx_Timestamp RTCEx Timestamp + * @{ + */ + +/** + * @brief Enable the RTC Timestamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) + +/** + * @brief Disable the RTC Timestamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) + +/** + * @brief Enable the RTC Timestamp interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Timestamp interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_TS: TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC Timestamp interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Timestamp interrupt sources to be enabled or disabled. + * This parameter can be: + * @arg RTC_IT_TS: TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Timestamp interrupt has occurred or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Timestamp interrupt to check. + * This parameter can be: + * @arg RTC_IT_TS: TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__) >> 4U)) != 0U) ? 1U : 0U) + +/** + * @brief Check whether the specified RTC Timestamp interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Timestamp interrupt source to check. + * This parameter can be: + * @arg RTC_IT_TS: TimeStamp interrupt + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC Timestamp's flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Timestamp flag to check. + * This parameter can be: + * @arg RTC_FLAG_TSF: Timestamp interrupt flag + * @arg RTC_FLAG_TSOVF: Timestamp overflow flag + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U) + +/** + * @brief Clear the RTC Timestamp's pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Timestamp flag to clear. + * This parameter can be: + * @arg RTC_FLAG_TSF: Timestamp interrupt flag + * @arg RTC_FLAG_TSOVF: Timestamp overflow flag + * @retval None + */ +#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) + +/** + * @brief Enable the RTC internal TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE)) + +/** + * @brief Disable the RTC internal TimeStamp peripheral. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE)) + +/** + * @brief Get the selected RTC Internal Timestamp's flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Internal Timestamp flag is pending or not. + * This parameter can be: + * @arg RTC_FLAG_ITSF: Internal Timestamp interrupt flag + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U) ? 1U : 0U) + +/** + * @brief Clear the RTC Internal Timestamp's pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Internal Timestamp flag to clear. + * This parameter can be: + * @arg RTC_FLAG_ITSF: Internal Timestamp interrupt flag + * @retval None + */ +#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0003FFFFU)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) + +/** + * @} + */ + +/* ---------------------------------TAMPER------------------------------------*/ + +/** @defgroup RTCEx_Tamper RTCEx Tamper + * @{ + */ + +/** + * @brief Enable the RTC Tamper1 input detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E)) + +/** + * @brief Disable the RTC Tamper1 input detection. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E)) + +/** + * @brief Enable the RTC Tamper interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMP: Tamper global interrupt + * @arg RTC_IT_TAMP1: Tamper 1 interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__)) + +/** + * @brief Disable the RTC Tamper interrupt. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. + * This parameter can be any combination of the following values: + * @arg RTC_IT_TAMP: Tamper global interrupt + * @arg RTC_IT_TAMP1: Tamper 1 interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__)) + +/** + * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. + * @param __HANDLE__ specifies the RTC handle. + * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. + * This parameter can be: + * @arg RTC_IT_TAMP: Tamper global interrupt + * @arg RTC_IT_TAMP1: Tamper 1 interrupt + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) + +/** + * @brief Get the selected RTC Tamper's flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Tamper flag to be checked. + * This parameter can be: + * @arg RTC_FLAG_TAMP1F: Tamper 1 interrupt flag + * @retval None + */ +#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U) + +/** + * @brief Clear the RTC Tamper's pending flags. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC Tamper Flag to clear. + * This parameter can be: + * @arg RTC_FLAG_TAMP1F: Tamper 1 interrupt flag + * @retval None + */ +#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) +/** + * @} + */ + +/* ------------------------------CALIBRATION----------------------------------*/ + +/** @defgroup RTCEx_Calibration RTCEx Calibration + * @{ + */ + +/** + * @brief Enable the RTC calibration output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) + +/** + * @brief Disable the calibration output. + * @param __HANDLE__ specifies the RTC handle. + * @retval None + */ +#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) + +/** + * @brief Get the selected RTC shift operation's flag status. + * @param __HANDLE__ specifies the RTC handle. + * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. + * This parameter can be: + * @arg RTC_FLAG_SHPF: Shift pending flag + * @retval None + */ +#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != 0U)? 1U : 0U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions + * @{ + */ + +/** @addtogroup RTCEx_Exported_Functions_Group1 + * @{ + */ +/* RTC Timestamp and Tamper functions *****************************************/ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin); +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); + +HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper); +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); +void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); + +void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group2 + * @{ + */ +/* RTC Wakeup functions ******************************************************/ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); +HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); +uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); +void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); +/** + * @} + */ + +/** @addtogroup RTCEx_Exported_Functions_Group3 + * @{ + */ +/* Extended Control functions ************************************************/ +void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); +uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); + +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTCEx_Private_Constants RTCEx Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_TAMPER_ENABLE_BITS_MASK RTC_TAMPER_1 + +#define RTC_TAMPER_FLAGS_MASK RTC_FLAG_TAMP1F + +#define RTC_TAMPER_IT_ENABLE_BITS_MASK ((uint32_t) (RTC_IT_TAMP1 | \ + RTC_IT_TAMP)) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup RTCEx_Private_Macros RTCEx Private Macros + * @{ + */ + +/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters + * @{ + */ +#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER) + +#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ + ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) + +#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)~RTC_TAMPER_ENABLE_BITS_MASK)) == 0x00U) && ((TAMPER) != 0U)) + +#define IS_RTC_TAMPER_PIN(PIN) ((PIN) == RTC_TAMPERPIN_DEFAULT) + +#define IS_RTC_TIMESTAMP_PIN(PIN) ((PIN) == RTC_TIMESTAMPPIN_DEFAULT) + +#define IS_RTC_TAMPER_INTERRUPT(INTERRUPT) ((((INTERRUPT) & ((uint32_t)~RTC_TAMPER_IT_ENABLE_BITS_MASK )) == 0x00U) && ((INTERRUPT) != 0U)) + +#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ + ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ + ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ + ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) + +#define IS_RTC_TAMPER_ERASE_MODE(MODE) (((MODE) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \ + ((MODE) == RTC_TAMPER_ERASE_BACKUP_DISABLE)) + +#define IS_RTC_TAMPER_MASKFLAG_STATE(STATE) (((STATE) == RTC_TAMPERMASK_FLAG_ENABLE) || \ + ((STATE) == RTC_TAMPERMASK_FLAG_DISABLE)) + +#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \ + ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \ + ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \ + ((FILTER) == RTC_TAMPERFILTER_8SAMPLE)) + +#define IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(FILTER, TRIGGER) \ + ( ( ((FILTER) != RTC_TAMPERFILTER_DISABLE) \ + && ( ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) \ + || ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))) \ + || ( ((FILTER) == RTC_TAMPERFILTER_DISABLE) \ + && ( ((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) \ + || ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE)))) + +#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ + ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) + +#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ + ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ + ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ + ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) + +#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \ + ((STATE) == RTC_TAMPER_PULLUP_DISABLE)) + +#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ + ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) + +#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ + ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) + +#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT) + +#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ + ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) + +#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ + ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) + +#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM) + +#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ + ((SEL) == RTC_SHIFTADD1S_SET)) + +#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS) + +#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ + ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_RTC_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smartcard.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smartcard.h new file mode 100644 index 0000000000..b000817756 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smartcard.h @@ -0,0 +1,1133 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_smartcard.h + * @author MCD Application Team + * @brief Header file of SMARTCARD HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_SMARTCARD_H +#define STM32WL3x_HAL_SMARTCARD_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup SMARTCARD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types + * @{ + */ + +/** + * @brief SMARTCARD Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((usart_ker_ckpres) / ((hsmartcard->Init.BaudRate))) + where usart_ker_ckpres is the USART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter @ref SMARTCARD_Word_Length can only be + set to 9 (8 data + 1 parity bits). */ + + uint32_t StopBits; /*!< Specifies the number of stop bits. + This parameter can be a value of @ref SMARTCARD_Stop_Bits. */ + + uint16_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref SMARTCARD_Parity + @note The parity is enabled by default (PCE is forced to 1). + Since the WordLength is forced to 8 bits + parity, M is + forced to 1 and the parity bit is the 9th bit. */ + + uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref SMARTCARD_Mode */ + + uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ + + uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SMARTCARD_Clock_Phase */ + + uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref SMARTCARD_Last_Bit */ + + uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote + is selected. Selecting the single sample method increases + the receiver tolerance to clock deviations. This parameter can be a value + of @ref SMARTCARD_OneBit_Sampling. */ + + uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler. + This parameter can be any value from 0x01 to 0x1F. Prescaler value is + multiplied by 2 to give the division factor of the source clock frequency */ + + uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */ + + uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled + in case of parity error. + This parameter can be a value of @ref SMARTCARD_NACK_Enable */ + + uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled. + This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/ + + uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks: + it is used to implement the Character Wait Time (CWT) and + Block Wait Time (BWT). It is coded over 24 bits. */ + + uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode. + This parameter can be any value from 0x0 to 0xFF */ + + uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in + receive and transmit mode). When set to 0, retransmission is + disabled. Otherwise, its maximum value is 7 (before signalling + an error) */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the USART clock source. + This parameter can be a value of @ref SMARTCARD_ClockPrescaler. */ + +} SMARTCARD_InitTypeDef; + +/** + * @brief SMARTCARD advanced features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several + advanced features may be initialized at the same time. This parameter + can be a value of @ref SMARTCARDEx_Advanced_Features_Initialization_Type */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref SMARTCARD_Tx_Inv */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref SMARTCARD_Rx_Inv */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref SMARTCARD_Data_Inv */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref SMARTCARD_Overrun_Disable */ + + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref SMARTCARD_MSB_First */ + + uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when + relevant flag is available) or once guard time period has elapsed. + This parameter can be a value + of @ref SMARTCARDEx_Transmission_Completion_Indication. */ +} SMARTCARD_AdvFeatureInitTypeDef; + +/** + * @brief HAL SMARTCARD State definition + * @note HAL SMARTCARD State value is a combination of 2 different substates: + * gState and RxState (see @ref SMARTCARD_State_Definition). + * - gState contains SMARTCARD state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL SMARTCARD Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_SMARTCARD_StateTypeDef; + +/** + * @brief SMARTCARD handle Structure definition + */ +typedef struct __SMARTCARD_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ + + SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used. + This parameter can be a value of + @ref SMARTCARDEx_FIFO_mode. */ + + void (*RxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global + Handle management and also related to Tx operations. + This parameter can be a value + of @ref HAL_SMARTCARD_StateTypeDef */ + + __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. + This parameter can be a value + of @ref HAL_SMARTCARD_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< SmartCard Error code */ + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + void (* TxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Complete Callback */ + + void (* RxCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Complete Callback */ + + void (* ErrorCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Error Callback */ + + void (* AbortCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Complete Callback */ + + void (* AbortTransmitCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Transmit Complete Callback */ + + void (* AbortReceiveCpltCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Abort Receive Complete Callback */ + + void (* RxFifoFullCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Rx Fifo Full Callback */ + + void (* TxFifoEmptyCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Tx Fifo Empty Callback */ + + void (* MspInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp Init callback */ + + void (* MspDeInitCallback)(struct __SMARTCARD_HandleTypeDef *hsmartcard); /*!< SMARTCARD Msp DeInit callback */ +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +} SMARTCARD_HandleTypeDef; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SMARTCARD Callback ID enumeration definition + */ +typedef enum +{ + HAL_SMARTCARD_TX_COMPLETE_CB_ID = 0x00U, /*!< SMARTCARD Tx Complete Callback ID */ + HAL_SMARTCARD_RX_COMPLETE_CB_ID = 0x01U, /*!< SMARTCARD Rx Complete Callback ID */ + HAL_SMARTCARD_ERROR_CB_ID = 0x02U, /*!< SMARTCARD Error Callback ID */ + HAL_SMARTCARD_ABORT_COMPLETE_CB_ID = 0x03U, /*!< SMARTCARD Abort Complete Callback ID */ + HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x04U, /*!< SMARTCARD Abort Transmit Complete Callback ID */ + HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID = 0x05U, /*!< SMARTCARD Abort Receive Complete Callback ID */ + HAL_SMARTCARD_RX_FIFO_FULL_CB_ID = 0x06U, /*!< SMARTCARD Rx Fifo Full Callback ID */ + HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID = 0x07U, /*!< SMARTCARD Tx Fifo Empty Callback ID */ + + HAL_SMARTCARD_MSPINIT_CB_ID = 0x08U, /*!< SMARTCARD MspInit callback ID */ + HAL_SMARTCARD_MSPDEINIT_CB_ID = 0x09U /*!< SMARTCARD MspDeInit callback ID */ + +} HAL_SMARTCARD_CallbackIDTypeDef; + +/** + * @brief HAL SMARTCARD Callback pointer definition + */ +typedef void (*pSMARTCARD_CallbackTypeDef)(SMARTCARD_HandleTypeDef *hsmartcard); /*!< pointer to an SMARTCARD callback function */ + +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants + * @{ + */ + +/** @defgroup SMARTCARD_State_Definition SMARTCARD State Code Definition + * @{ + */ +#define HAL_SMARTCARD_STATE_RESET 0x00000000U /*!< Peripheral is not initialized. Value + is allowed for gState and RxState */ +#define HAL_SMARTCARD_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for + use. Value is allowed for gState + and RxState */ +#define HAL_SMARTCARD_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_SMARTCARD_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception + process is ongoing Not to be used for + neither gState nor RxState. + Value is result of combination (Or) + between gState and RxState values */ +#define HAL_SMARTCARD_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_SMARTCARD_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Error_Definition SMARTCARD Error Code Definition + * @{ + */ +#define HAL_SMARTCARD_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SMARTCARD_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_SMARTCARD_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_SMARTCARD_ERROR_FE (0x00000004U) /*!< frame error */ +#define HAL_SMARTCARD_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define HAL_SMARTCARD_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#endif /* HAL_DMA_MODULE_ENABLED */ +#define HAL_SMARTCARD_ERROR_RTO (0x00000020U) /*!< Receiver TimeOut error */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +#define HAL_SMARTCARD_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length + * @{ + */ +#define SMARTCARD_WORDLENGTH_9B USART_CR1_M0 /*!< SMARTCARD frame length */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits + * @{ + */ +#define SMARTCARD_STOPBITS_0_5 USART_CR2_STOP_0 /*!< SMARTCARD frame with 0.5 stop bit */ +#define SMARTCARD_STOPBITS_1_5 USART_CR2_STOP /*!< SMARTCARD frame with 1.5 stop bits */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Parity SMARTCARD Parity + * @{ + */ +#define SMARTCARD_PARITY_EVEN USART_CR1_PCE /*!< SMARTCARD frame even parity */ +#define SMARTCARD_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< SMARTCARD frame odd parity */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode + * @{ + */ +#define SMARTCARD_MODE_RX USART_CR1_RE /*!< SMARTCARD RX mode */ +#define SMARTCARD_MODE_TX USART_CR1_TE /*!< SMARTCARD TX mode */ +#define SMARTCARD_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< SMARTCARD RX and TX mode */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity + * @{ + */ +#define SMARTCARD_POLARITY_LOW 0x00000000U /*!< SMARTCARD frame low polarity */ +#define SMARTCARD_POLARITY_HIGH USART_CR2_CPOL /*!< SMARTCARD frame high polarity */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase + * @{ + */ +#define SMARTCARD_PHASE_1EDGE 0x00000000U /*!< SMARTCARD frame phase on first clock transition */ +#define SMARTCARD_PHASE_2EDGE USART_CR2_CPHA /*!< SMARTCARD frame phase on second clock transition */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit + * @{ + */ +#define SMARTCARD_LASTBIT_DISABLE 0x00000000U /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */ +#define SMARTCARD_LASTBIT_ENABLE USART_CR2_LBCL /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */ +/** + * @} + */ + +/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method + * @{ + */ +#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< SMARTCARD frame one-bit sample disabled */ +#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< SMARTCARD frame one-bit sample enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable + * @{ + */ +#define SMARTCARD_NACK_DISABLE 0x00000000U /*!< SMARTCARD NACK transmission disabled */ +#define SMARTCARD_NACK_ENABLE USART_CR3_NACK /*!< SMARTCARD NACK transmission enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable + * @{ + */ +#define SMARTCARD_TIMEOUT_DISABLE 0x00000000U /*!< SMARTCARD receiver timeout disabled */ +#define SMARTCARD_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< SMARTCARD receiver timeout enabled */ +/** + * @} + */ + +/** @defgroup SMARTCARD_ClockPrescaler SMARTCARD Clock Prescaler + * @{ + */ +#define SMARTCARD_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define SMARTCARD_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define SMARTCARD_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define SMARTCARD_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define SMARTCARD_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define SMARTCARD_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define SMARTCARD_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define SMARTCARD_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define SMARTCARD_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define SMARTCARD_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define SMARTCARD_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define SMARTCARD_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define SMARTCARD_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define SMARTCARD_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion + * @{ + */ +#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap + * @{ + */ +#define SMARTCARD_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define SMARTCARD_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable + * @{ + */ +#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error + * @{ + */ +#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ + +/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first + * @{ + */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received first disable */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received first enable */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters + * @{ + */ +#define SMARTCARD_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive data flush request */ +#define SMARTCARD_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush request */ +/** + * @} + */ + +/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask + * @{ + */ +#define SMARTCARD_IT_MASK 0x001FU /*!< SMARTCARD interruptions flags mask */ +#define SMARTCARD_CR_MASK 0x00E0U /*!< SMARTCARD control register mask */ +#define SMARTCARD_CR_POS 5U /*!< SMARTCARD control register position */ +#define SMARTCARD_ISR_MASK 0x1F00U /*!< SMARTCARD ISR register mask */ +#define SMARTCARD_ISR_POS 8U /*!< SMARTCARD ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros + * @{ + */ + +/** @brief Reset SMARTCARD handle states. + * @param __HANDLE__ SMARTCARD handle. + * @retval None + */ +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** @brief Flush the Smartcard Data registers. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified SMARTCARD pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag + * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag + * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag + * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag + * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag + * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag + * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag + * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag + * @arg @ref SMARTCARD_CLEAR_TXFECF TXFIFO empty Clear flag + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the SMARTCARD PE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF) + +/** @brief Clear the SMARTCARD FE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF) + +/** @brief Clear the SMARTCARD NE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF) + +/** @brief Clear the SMARTCARD ORE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF) + +/** @brief Clear the SMARTCARD IDLE pending flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF) + +/** @brief Check whether the specified Smartcard flag is set or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_FLAG_TCBGT Transmission complete before guard time flag (when flag available) + * @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag + * @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref SMARTCARD_FLAG_BUSY Busy flag + * @arg @ref SMARTCARD_FLAG_EOBF End of block flag + * @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag + * @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag + * @arg @ref SMARTCARD_FLAG_TC Transmission complete flag + * @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag + * @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag + * @arg @ref SMARTCARD_FLAG_ORE Overrun error flag + * @arg @ref SMARTCARD_FLAG_NE Noise error flag + * @arg @ref SMARTCARD_FLAG_FE Framing error flag + * @arg @ref SMARTCARD_FLAG_PE Parity error flag + * @arg @ref SMARTCARD_FLAG_TXFNF TXFIFO not full flag + * @arg @ref SMARTCARD_FLAG_RXFNE RXFIFO not empty flag + * @arg @ref SMARTCARD_FLAG_TXFE TXFIFO Empty flag + * @arg @ref SMARTCARD_FLAG_RXFF RXFIFO Full flag + * @arg @ref SMARTCARD_FLAG_RXFT SMARTCARD RXFIFO threshold flag + * @arg @ref SMARTCARD_FLAG_TXFT SMARTCARD TXFIFO threshold flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified SmartCard interrupt. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before + * guard time interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))):\ + ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) + +/** @brief Disable the specified SmartCard interrupt. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard + * time interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1UL <<\ + ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) + +/** @brief Check whether the specified SmartCard interrupt has occurred or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time + * interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __INTERRUPT__) (\ + (((__HANDLE__)->Instance->ISR & (0x01UL << (((__INTERRUPT__)\ + & SMARTCARD_ISR_MASK)>> SMARTCARD_ISR_POS)))!= 0U)\ + ? SET : RESET) + +/** @brief Check whether the specified SmartCard interrupt source is enabled or not. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __INTERRUPT__ specifies the SMARTCARD interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_IT_EOB End of block interrupt + * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt + * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt + * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt + * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time + * interrupt (when interruption available) + * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt + * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt + * @arg @ref SMARTCARD_IT_PE Parity error interrupt + * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) + * @arg @ref SMARTCARD_IT_TXFNF TX FIFO not full interruption + * @arg @ref SMARTCARD_IT_RXFNE RXFIFO not empty interruption + * @arg @ref SMARTCARD_IT_RXFF RXFIFO full interruption + * @arg @ref SMARTCARD_IT_TXFE TXFIFO empty interruption + * @arg @ref SMARTCARD_IT_RXFT RXFIFO threshold reached interruption + * @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 0x01U)?\ + (__HANDLE__)->Instance->CR1 : \ + (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\ + SMARTCARD_CR_POS) == 0x02U)?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) &\ + (0x01UL << (((uint16_t)(__INTERRUPT__))\ + & SMARTCARD_IT_MASK))) != 0U)\ + ? SET : RESET) + +/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt. + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag + * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag + * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag + * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag + * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag + * @arg @ref SMARTCARD_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag + * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available) + * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag + * @retval None + */ +#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific SMARTCARD request flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request + * @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the SMARTCARD one bit sample method. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the SMARTCARD one bit sample method. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\ + &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) + +/** @brief Enable the USART associated to the SMARTCARD Handle. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable the USART associated to the SMARTCARD Handle + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @retval None + */ +#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros -------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros + * @{ + */ + +/* An always 16 MHz is requested by USART to maintain fixed baud rate while + * system clock is switching from a frequency to another) + */ +#define SMARTCARD_PERIPHCLK (16000000U) + +/** @brief Check the Baud rate range. + * @note The maximum Baud Rate is derived from the maximum clock on WL3 (16 MHz) + * divided by the oversampling used on the SMARTCARD (i.e. 16). + * @param __BAUDRATE__ Baud rate set by the configuration function. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 1000001U) + +/** @brief Check the block length range. + * @note The maximum SMARTCARD block length is 0xFF. + * @param __LENGTH__ block length. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU) + +/** @brief Check the receiver timeout value. + * @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** @brief Check the SMARTCARD autoretry counter value. + * @note The maximum number of retransmissions is 0x7. + * @param __COUNT__ number of retransmissions. + * @retval Test result (TRUE or FALSE) + */ +#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U) + +/** @brief Ensure that SMARTCARD frame length is valid. + * @param __LENGTH__ SMARTCARD frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B) + +/** @brief Ensure that SMARTCARD frame number of stop bits is valid. + * @param __STOPBITS__ SMARTCARD frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\ + ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5)) + +/** @brief Ensure that SMARTCARD frame parity is valid. + * @param __PARITY__ SMARTCARD frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \ + ((__PARITY__) == SMARTCARD_PARITY_ODD)) + +/** @brief Ensure that SMARTCARD communication mode is valid. + * @param __MODE__ SMARTCARD communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & 0xFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) + +/** @brief Ensure that SMARTCARD frame polarity is valid. + * @param __CPOL__ SMARTCARD frame polarity. + * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) + */ +#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW)\ + || ((__CPOL__) == SMARTCARD_POLARITY_HIGH)) + +/** @brief Ensure that SMARTCARD frame phase is valid. + * @param __CPHA__ SMARTCARD frame phase. + * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) + */ +#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE)) + +/** @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid. + * @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting. + * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) + */ +#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \ + ((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE)) + +/** @brief Ensure that SMARTCARD frame sampling is valid. + * @param __ONEBIT__ SMARTCARD frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE)) + +/** @brief Ensure that SMARTCARD NACK transmission setting is valid. + * @param __NACK__ SMARTCARD NACK transmission setting. + * @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid) + */ +#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \ + ((__NACK__) == SMARTCARD_NACK_DISABLE)) + +/** @brief Ensure that SMARTCARD receiver timeout setting is valid. + * @param __TIMEOUT__ SMARTCARD receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE)) + +/** @brief Ensure that SMARTCARD clock Prescaler is valid. + * @param __CLOCKPRESCALER__ SMARTCARD clock Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_SMARTCARD_CLOCKPRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == SMARTCARD_PRESCALER_DIV256)) + +/** @brief Ensure that SMARTCARD advanced features initialization is valid. + * @param __INIT__ SMARTCARD advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \ + SMARTCARD_ADVFEATURE_TXINVERT_INIT | \ + SMARTCARD_ADVFEATURE_RXINVERT_INIT | \ + SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \ + SMARTCARD_ADVFEATURE_SWAP_INIT | \ + SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \ + SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) + +/** @brief Ensure that SMARTCARD frame TX inversion setting is valid. + * @param __TXINV__ SMARTCARD frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame RX inversion setting is valid. + * @param __RXINV__ SMARTCARD frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame data inversion setting is valid. + * @param __DATAINV__ SMARTCARD frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE)) + +/** @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid. + * @param __SWAP__ SMARTCARD frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE)) + +/** @brief Ensure that SMARTCARD frame overrun setting is valid. + * @param __OVERRUN__ SMARTCARD frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE)) + +/** @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid. + * @param __DMA__ SMARTCARD DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR)) + +/** @brief Ensure that SMARTCARD frame MSB first setting is valid. + * @param __MSBFIRST__ SMARTCARD frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE)) + +/** @brief Ensure that SMARTCARD request parameter is valid. + * @param __PARAM__ SMARTCARD request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST)) + +/** + * @} + */ + +/* Include SMARTCARD HAL Extended module */ +#include "stm32wl3x_hal_smartcard_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARD_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group1 + * @{ + */ + +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard); + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/* Callbacks Register/UnRegister functions ***********************************/ +HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID, + pSMARTCARD_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group2 + * @{ + */ + +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); +#endif /* HAL_DMA_MODULE_ENABLED */ +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard); + +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/* Peripheral State and Error functions ***************************************/ +/** @addtogroup SMARTCARD_Exported_Functions_Group4 + * @{ + */ + +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(const SMARTCARD_HandleTypeDef *hsmartcard); +uint32_t HAL_SMARTCARD_GetError(const SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_SMARTCARD_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smartcard_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smartcard_ex.h new file mode 100644 index 0000000000..3970e105c3 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smartcard_ex.h @@ -0,0 +1,335 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_smartcard_ex.h + * @author MCD Application Team + * @brief Header file of SMARTCARD HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_SMARTCARD_EX_H +#define STM32WL3x_HAL_SMARTCARD_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup SMARTCARDEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @addtogroup SMARTCARDEx_Exported_Constants SMARTCARD Extended Exported Constants + * @{ + */ + +/** @defgroup SMARTCARDEx_Transmission_Completion_Indication SMARTCARD Transmission Completion Indication + * @{ + */ +#define SMARTCARD_TCBGT SMARTCARD_IT_TCBGT /*!< SMARTCARD transmission complete before guard time */ +#define SMARTCARD_TC SMARTCARD_IT_TC /*!< SMARTCARD transmission complete (flag raised when guard time has elapsed) */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type + * @{ + */ +#define SMARTCARD_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define SMARTCARD_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define SMARTCARD_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define SMARTCARD_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +#define SMARTCARD_ADVFEATURE_TXCOMPLETION 0x00000100U /*!< TX completion indication before of after guard time */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_FIFO_mode SMARTCARD FIFO mode + * @brief SMARTCARD FIFO mode + * @{ + */ +#define SMARTCARD_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define SMARTCARD_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_TXFIFO_threshold_level SMARTCARD TXFIFO threshold level + * @brief SMARTCARD TXFIFO level + * @{ + */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ +#define SMARTCARD_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_RXFIFO_threshold_level SMARTCARD RXFIFO threshold level + * @brief SMARTCARD RXFIFO level + * @{ + */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ +#define SMARTCARD_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Flags SMARTCARD Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define SMARTCARD_FLAG_TCBGT USART_ISR_TCBGT /*!< SMARTCARD transmission complete before guard time completion */ +#define SMARTCARD_FLAG_REACK USART_ISR_REACK /*!< SMARTCARD receive enable acknowledge flag */ +#define SMARTCARD_FLAG_TEACK USART_ISR_TEACK /*!< SMARTCARD transmit enable acknowledge flag */ +#define SMARTCARD_FLAG_BUSY USART_ISR_BUSY /*!< SMARTCARD busy flag */ +#define SMARTCARD_FLAG_EOBF USART_ISR_EOBF /*!< SMARTCARD end of block flag */ +#define SMARTCARD_FLAG_RTOF USART_ISR_RTOF /*!< SMARTCARD receiver timeout flag */ +#define SMARTCARD_FLAG_TXE USART_ISR_TXE_TXFNF /*!< SMARTCARD transmit data register empty */ +#define SMARTCARD_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< SMARTCARD TXFIFO not full */ +#define SMARTCARD_FLAG_TC USART_ISR_TC /*!< SMARTCARD transmission complete */ +#define SMARTCARD_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< SMARTCARD read data register not empty */ +#define SMARTCARD_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< SMARTCARD RXFIFO not empty */ +#define SMARTCARD_FLAG_IDLE USART_ISR_IDLE /*!< SMARTCARD idle line detection */ +#define SMARTCARD_FLAG_ORE USART_ISR_ORE /*!< SMARTCARD overrun error */ +#define SMARTCARD_FLAG_NE USART_ISR_NE /*!< SMARTCARD noise error */ +#define SMARTCARD_FLAG_FE USART_ISR_FE /*!< SMARTCARD frame error */ +#define SMARTCARD_FLAG_PE USART_ISR_PE /*!< SMARTCARD parity error */ +#define SMARTCARD_FLAG_TXFE USART_ISR_TXFE /*!< SMARTCARD TXFIFO Empty flag */ +#define SMARTCARD_FLAG_RXFF USART_ISR_RXFF /*!< SMARTCARD RXFIFO Full flag */ +#define SMARTCARD_FLAG_RXFT USART_ISR_RXFT /*!< SMARTCARD RXFIFO threshold flag */ +#define SMARTCARD_FLAG_TXFT USART_ISR_TXFT /*!< SMARTCARD TXFIFO threshold flag */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Interrupt_definition SMARTCARD Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5 bits) + * - XX : Interrupt source register (2 bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5 bits) + * @{ + */ +#define SMARTCARD_IT_PE 0x0028U /*!< SMARTCARD parity error interruption */ +#define SMARTCARD_IT_TXE 0x0727U /*!< SMARTCARD transmit data register empty interruption */ +#define SMARTCARD_IT_TXFNF 0x0727U /*!< SMARTCARD TX FIFO not full interruption */ +#define SMARTCARD_IT_TC 0x0626U /*!< SMARTCARD transmission complete interruption */ +#define SMARTCARD_IT_RXNE 0x0525U /*!< SMARTCARD read data register not empty interruption */ +#define SMARTCARD_IT_RXFNE 0x0525U /*!< SMARTCARD RXFIFO not empty interruption */ +#define SMARTCARD_IT_IDLE 0x0424U /*!< SMARTCARD idle line detection interruption */ + +#define SMARTCARD_IT_ERR 0x0060U /*!< SMARTCARD error interruption */ +#define SMARTCARD_IT_ORE 0x0300U /*!< SMARTCARD overrun error interruption */ +#define SMARTCARD_IT_NE 0x0200U /*!< SMARTCARD noise error interruption */ +#define SMARTCARD_IT_FE 0x0100U /*!< SMARTCARD frame error interruption */ + +#define SMARTCARD_IT_EOB 0x0C3BU /*!< SMARTCARD end of block interruption */ +#define SMARTCARD_IT_RTO 0x0B3AU /*!< SMARTCARD receiver timeout interruption */ +#define SMARTCARD_IT_TCBGT 0x1978U /*!< SMARTCARD transmission complete before guard time completion interruption */ + +#define SMARTCARD_IT_RXFF 0x183FU /*!< SMARTCARD RXFIFO full interruption */ +#define SMARTCARD_IT_TXFE 0x173EU /*!< SMARTCARD TXFIFO empty interruption */ +#define SMARTCARD_IT_RXFT 0x1A7CU /*!< SMARTCARD RXFIFO threshold reached interruption */ +#define SMARTCARD_IT_TXFT 0x1B77U /*!< SMARTCARD TXFIFO threshold reached interruption */ +/** + * @} + */ + +/** @defgroup SMARTCARDEx_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags + * @{ + */ +#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< SMARTCARD parity error clear flag */ +#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< SMARTCARD framing error clear flag */ +#define SMARTCARD_CLEAR_NEF USART_ICR_NECF /*!< SMARTCARD noise error detected clear flag */ +#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< SMARTCARD overrun error clear flag */ +#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /*!< SMARTCARD idle line detected clear flag */ +#define SMARTCARD_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty Clear Flag */ +#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< SMARTCARD transmission complete clear flag */ +#define SMARTCARD_CLEAR_TCBGTF USART_ICR_TCBGTCF /*!< SMARTCARD transmission complete before guard time completion clear flag */ +#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< SMARTCARD receiver time out clear flag */ +#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< SMARTCARD end of block clear flag */ +/** + * @} + */ + +/** + * @} + */ +/* Exported macros -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Private_Macros SMARTCARD Extended Private Macros + * @{ + */ + +/** @brief Set the Transmission Completion flag + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @note If TCBGT (Transmission Complete Before Guard Time) flag is not available or if + * AdvancedInit.TxCompletionIndication is not already filled, the latter is forced + * to SMARTCARD_TC (transmission completion indication when guard time has elapsed). + * @retval None + */ +#define SMARTCARD_TRANSMISSION_COMPLETION_SETTING(__HANDLE__) \ + do { \ + if (HAL_IS_BIT_CLR((__HANDLE__)->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXCOMPLETION)) \ + { \ + (__HANDLE__)->AdvancedInit.TxCompletionIndication = SMARTCARD_TC; \ + } \ + else \ + { \ + assert_param(IS_SMARTCARD_TRANSMISSION_COMPLETION((__HANDLE__)->AdvancedInit.TxCompletionIndication)); \ + } \ + } while(0U) + +/** @brief Return the transmission completion flag. + * @param __HANDLE__ specifies the SMARTCARD Handle. + * @note Based on AdvancedInit.TxCompletionIndication setting, return TC or TCBGT flag. + * When TCBGT flag (Transmission Complete Before Guard Time) is not available, TC flag is + * reported. + * @retval Transmission completion flag + */ +#define SMARTCARD_TRANSMISSION_COMPLETION_FLAG(__HANDLE__) \ + (((__HANDLE__)->AdvancedInit.TxCompletionIndication == SMARTCARD_TC) ? (SMARTCARD_FLAG_TC) : (SMARTCARD_FLAG_TCBGT)) + + +/** @brief Ensure that SMARTCARD frame transmission completion used flag is valid. + * @param __TXCOMPLETE__ SMARTCARD frame transmission completion used flag. + * @retval SET (__TXCOMPLETE__ is valid) or RESET (__TXCOMPLETE__ is invalid) + */ +#define IS_SMARTCARD_TRANSMISSION_COMPLETION(__TXCOMPLETE__) (((__TXCOMPLETE__) == SMARTCARD_TCBGT) || \ + ((__TXCOMPLETE__) == SMARTCARD_TC)) + +/** @brief Ensure that SMARTCARD FIFO mode is valid. + * @param __STATE__ SMARTCARD FIFO mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_SMARTCARD_FIFOMODE_STATE(__STATE__) (((__STATE__) == SMARTCARD_FIFOMODE_DISABLE ) || \ + ((__STATE__) == SMARTCARD_FIFOMODE_ENABLE)) + +/** @brief Ensure that SMARTCARD TXFIFO threshold level is valid. + * @param __THRESHOLD__ SMARTCARD TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_SMARTCARD_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == SMARTCARD_TXFIFO_THRESHOLD_8_8)) + +/** @brief Ensure that SMARTCARD RXFIFO threshold level is valid. + * @param __THRESHOLD__ SMARTCARD RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_SMARTCARD_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == SMARTCARD_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARDEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation methods *******************************************************/ + +/** @addtogroup SMARTCARDEx_Exported_Functions_Group1 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength); +void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue); +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMARTCARDEx_Exported_Functions_Group2 + * @{ + */ + +/* IO operation functions *****************************************************/ +void HAL_SMARTCARDEx_RxFifoFullCallback(SMARTCARD_HandleTypeDef *hsmartcard); +void HAL_SMARTCARDEx_TxFifoEmptyCallback(SMARTCARD_HandleTypeDef *hsmartcard); + +/** + * @} + */ + +/** @addtogroup SMARTCARDEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard); +HAL_StatusTypeDef HAL_SMARTCARDEx_SetTxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold); +HAL_StatusTypeDef HAL_SMARTCARDEx_SetRxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_SMARTCARD_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smbus.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smbus.h new file mode 100644 index 0000000000..55366c23e4 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smbus.h @@ -0,0 +1,787 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_smbus.h + * @author MCD Application Team + * @brief Header file of SMBUS HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_SMBUS_H +#define STM32WL3x_HAL_SMBUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup SMBUS + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SMBUS_Exported_Types SMBUS Exported Types + * @{ + */ + +/** @defgroup SMBUS_Configuration_Structure_definition SMBUS Configuration Structure definition + * @brief SMBUS Configuration Structure definition + * @{ + */ +typedef struct +{ + uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value. + This parameter calculated by referring to SMBUS initialization section + in Reference manual */ + uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not. + This parameter can be a value of @ref SMBUS_Analog_Filter */ + + uint32_t OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit address. */ + + uint32_t AddressingMode; /*!< Specifies addressing mode selected. + This parameter can be a value of @ref SMBUS_addressing_mode */ + + uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. + This parameter can be a value of @ref SMBUS_dual_addressing_mode */ + + uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected + This parameter can be a 7-bit address. */ + + uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address + if dual addressing mode is selected + This parameter can be a value of @ref SMBUS_own_address2_masks. */ + + uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. + This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */ + + uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. + This parameter can be a value of @ref SMBUS_nostretch_mode */ + + uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected. + This parameter can be a value of @ref SMBUS_packet_error_check_mode */ + + uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected. + This parameter can be a value of @ref SMBUS_peripheral_mode */ + + uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value. + (Enable bits and different timeout values) + This parameter calculated by referring to SMBUS initialization section + in Reference manual */ +} SMBUS_InitTypeDef; +/** + * @} + */ + +/** @defgroup HAL_state_definition HAL state definition + * @brief HAL State definition + * @{ + */ +#define HAL_SMBUS_STATE_RESET (0x00000000U) /*!< SMBUS not yet initialized or disabled */ +#define HAL_SMBUS_STATE_READY (0x00000001U) /*!< SMBUS initialized and ready for use */ +#define HAL_SMBUS_STATE_BUSY (0x00000002U) /*!< SMBUS internal process is ongoing */ +#define HAL_SMBUS_STATE_MASTER_BUSY_TX (0x00000012U) /*!< Master Data Transmission process is ongoing */ +#define HAL_SMBUS_STATE_MASTER_BUSY_RX (0x00000022U) /*!< Master Data Reception process is ongoing */ +#define HAL_SMBUS_STATE_SLAVE_BUSY_TX (0x00000032U) /*!< Slave Data Transmission process is ongoing */ +#define HAL_SMBUS_STATE_SLAVE_BUSY_RX (0x00000042U) /*!< Slave Data Reception process is ongoing */ +#define HAL_SMBUS_STATE_LISTEN (0x00000008U) /*!< Address Listen Mode is ongoing */ +/** + * @} + */ + +/** @defgroup SMBUS_Error_Code_definition SMBUS Error Code definition + * @brief SMBUS Error Code definition + * @{ + */ +#define HAL_SMBUS_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SMBUS_ERROR_BERR (0x00000001U) /*!< BERR error */ +#define HAL_SMBUS_ERROR_ARLO (0x00000002U) /*!< ARLO error */ +#define HAL_SMBUS_ERROR_ACKF (0x00000004U) /*!< ACKF error */ +#define HAL_SMBUS_ERROR_OVR (0x00000008U) /*!< OVR error */ +#define HAL_SMBUS_ERROR_HALTIMEOUT (0x00000010U) /*!< Timeout error */ +#define HAL_SMBUS_ERROR_BUSTIMEOUT (0x00000020U) /*!< Bus Timeout error */ +#define HAL_SMBUS_ERROR_ALERT (0x00000040U) /*!< Alert error */ +#define HAL_SMBUS_ERROR_PECERR (0x00000080U) /*!< PEC error */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +#define HAL_SMBUS_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +#define HAL_SMBUS_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */ +/** + * @} + */ + +/** @defgroup SMBUS_handle_Structure_definition SMBUS handle Structure definition + * @brief SMBUS handle Structure definition + * @{ + */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +typedef struct __SMBUS_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +{ + I2C_TypeDef *Instance; /*!< SMBUS registers base address */ + + SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */ + + uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */ + + uint16_t XferSize; /*!< SMBUS transfer size */ + + __IO uint16_t XferCount; /*!< SMBUS transfer counter */ + + __IO uint32_t XferOptions; /*!< SMBUS transfer options */ + + __IO uint32_t PreviousState; /*!< SMBUS communication Previous state */ + + HAL_LockTypeDef Lock; /*!< SMBUS locking object */ + + __IO uint32_t State; /*!< SMBUS communication state */ + + __IO uint32_t ErrorCode; /*!< SMBUS Error code */ + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Master Tx Transfer completed callback */ + void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Master Rx Transfer completed callback */ + void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Slave Tx Transfer completed callback */ + void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Slave Rx Transfer completed callback */ + void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Listen Complete callback */ + void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Error callback */ + + void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); + /*!< SMBUS Slave Address Match callback */ + + void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Msp Init callback */ + void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); + /*!< SMBUS Msp DeInit callback */ + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +} SMBUS_HandleTypeDef; + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +/** + * @brief HAL SMBUS Callback ID enumeration definition + */ +typedef enum +{ + HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID = 0x00U, /*!< SMBUS Master Tx Transfer completed callback ID */ + HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID = 0x01U, /*!< SMBUS Master Rx Transfer completed callback ID */ + HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID = 0x02U, /*!< SMBUS Slave Tx Transfer completed callback ID */ + HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID = 0x03U, /*!< SMBUS Slave Rx Transfer completed callback ID */ + HAL_SMBUS_LISTEN_COMPLETE_CB_ID = 0x04U, /*!< SMBUS Listen Complete callback ID */ + HAL_SMBUS_ERROR_CB_ID = 0x05U, /*!< SMBUS Error callback ID */ + + HAL_SMBUS_MSPINIT_CB_ID = 0x06U, /*!< SMBUS Msp Init callback ID */ + HAL_SMBUS_MSPDEINIT_CB_ID = 0x07U /*!< SMBUS Msp DeInit callback ID */ + +} HAL_SMBUS_CallbackIDTypeDef; + +/** + * @brief HAL SMBUS Callback pointer definition + */ +typedef void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); +/*!< pointer to an SMBUS callback function */ +typedef void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, + uint16_t AddrMatchCode); +/*!< pointer to an SMBUS Address Match callback function */ + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** + * @} + */ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants + * @{ + */ + +/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter + * @{ + */ +#define SMBUS_ANALOGFILTER_ENABLE (0x00000000U) +#define SMBUS_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF +/** + * @} + */ + +/** @defgroup SMBUS_addressing_mode SMBUS addressing mode + * @{ + */ +#define SMBUS_ADDRESSINGMODE_7BIT (0x00000001U) +/** + * @} + */ + +/** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode + * @{ + */ + +#define SMBUS_DUALADDRESS_DISABLE (0x00000000U) +#define SMBUS_DUALADDRESS_ENABLE I2C_OAR2_OA2EN +/** + * @} + */ + +/** @defgroup SMBUS_own_address2_masks SMBUS ownaddress2 masks + * @{ + */ + +#define SMBUS_OA2_NOMASK ((uint8_t)0x00U) +#define SMBUS_OA2_MASK01 ((uint8_t)0x01U) +#define SMBUS_OA2_MASK02 ((uint8_t)0x02U) +#define SMBUS_OA2_MASK03 ((uint8_t)0x03U) +#define SMBUS_OA2_MASK04 ((uint8_t)0x04U) +#define SMBUS_OA2_MASK05 ((uint8_t)0x05U) +#define SMBUS_OA2_MASK06 ((uint8_t)0x06U) +#define SMBUS_OA2_MASK07 ((uint8_t)0x07U) +/** + * @} + */ + + +/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode + * @{ + */ +#define SMBUS_GENERALCALL_DISABLE (0x00000000U) +#define SMBUS_GENERALCALL_ENABLE I2C_CR1_GCEN +/** + * @} + */ + +/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode + * @{ + */ +#define SMBUS_NOSTRETCH_DISABLE (0x00000000U) +#define SMBUS_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH +/** + * @} + */ + +/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode + * @{ + */ +#define SMBUS_PEC_DISABLE (0x00000000U) +#define SMBUS_PEC_ENABLE I2C_CR1_PECEN +/** + * @} + */ + +/** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode + * @{ + */ +#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST I2C_CR1_SMBHEN +#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (0x00000000U) +#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP I2C_CR1_SMBDEN +/** + * @} + */ + +/** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition + * @{ + */ + +#define SMBUS_SOFTEND_MODE (0x00000000U) +#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD +#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND +#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE +/** + * @} + */ + +/** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition + * @{ + */ + +#define SMBUS_NO_STARTSTOP (0x00000000U) +#define SMBUS_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +#define SMBUS_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +#define SMBUS_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/** + * @} + */ + +/** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition + * @{ + */ + +/* List of XferOptions in usage of : + * 1- Restart condition when direction change + * 2- No Restart condition in other use cases + */ +#define SMBUS_FIRST_FRAME SMBUS_SOFTEND_MODE +#define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE)) +#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE +#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE +#define SMBUS_FIRST_FRAME_WITH_PEC ((uint32_t)(SMBUS_SOFTEND_MODE | SMBUS_SENDPEC_MODE)) +#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) +#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) + +/* List of XferOptions in usage of : + * 1- Restart condition in all use cases (direction change or not) + */ +#define SMBUS_OTHER_FRAME_NO_PEC (0x000000AAU) +#define SMBUS_OTHER_FRAME_WITH_PEC (0x0000AA00U) +#define SMBUS_OTHER_AND_LAST_FRAME_NO_PEC (0x00AA0000U) +#define SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC (0xAA000000U) +/** + * @} + */ + +/** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition + * @brief SMBUS Interrupt definition + * Elements values convention: 0xXXXXXXXX + * - XXXXXXXX : Interrupt control mask + * @{ + */ +#define SMBUS_IT_ERRI I2C_CR1_ERRIE +#define SMBUS_IT_TCI I2C_CR1_TCIE +#define SMBUS_IT_STOPI I2C_CR1_STOPIE +#define SMBUS_IT_NACKI I2C_CR1_NACKIE +#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE +#define SMBUS_IT_RXI I2C_CR1_RXIE +#define SMBUS_IT_TXI I2C_CR1_TXIE +#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | \ + SMBUS_IT_NACKI | SMBUS_IT_TXI) +#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | \ + SMBUS_IT_RXI) +#define SMBUS_IT_ALERT (SMBUS_IT_ERRI) +#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI) +/** + * @} + */ + +/** @defgroup SMBUS_Flag_definition SMBUS Flag definition + * @brief Flag definition + * Elements values convention: 0xXXXXYYYY + * - XXXXXXXX : Flag mask + * @{ + */ + +#define SMBUS_FLAG_TXE I2C_ISR_TXE +#define SMBUS_FLAG_TXIS I2C_ISR_TXIS +#define SMBUS_FLAG_RXNE I2C_ISR_RXNE +#define SMBUS_FLAG_ADDR I2C_ISR_ADDR +#define SMBUS_FLAG_AF I2C_ISR_NACKF +#define SMBUS_FLAG_STOPF I2C_ISR_STOPF +#define SMBUS_FLAG_TC I2C_ISR_TC +#define SMBUS_FLAG_TCR I2C_ISR_TCR +#define SMBUS_FLAG_BERR I2C_ISR_BERR +#define SMBUS_FLAG_ARLO I2C_ISR_ARLO +#define SMBUS_FLAG_OVR I2C_ISR_OVR +#define SMBUS_FLAG_PECERR I2C_ISR_PECERR +#define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT +#define SMBUS_FLAG_ALERT I2C_ISR_ALERT +#define SMBUS_FLAG_BUSY I2C_ISR_BUSY +#define SMBUS_FLAG_DIR I2C_ISR_DIR +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros + * @{ + */ + +/** @brief Reset SMBUS handle state. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SMBUS_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET) +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SMBUS interrupts. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) + +/** @brief Disable the specified SMBUS interrupts. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval None + */ +#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) + +/** @brief Check whether the specified SMBUS interrupt source is enabled or not. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __INTERRUPT__ specifies the SMBUS interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref SMBUS_IT_ERRI Errors interrupt enable + * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable + * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable + * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable + * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable + * @arg @ref SMBUS_IT_RXI RX interrupt enable + * @arg @ref SMBUS_IT_TXI TX interrupt enable + * + * @retval The new state of __IT__ (SET or RESET). + */ +#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \ + ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SMBUS flag is set or not. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref SMBUS_FLAG_TXE Transmit data register empty + * @arg @ref SMBUS_FLAG_TXIS Transmit interrupt status + * @arg @ref SMBUS_FLAG_RXNE Receive data register not empty + * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode) + * @arg @ref SMBUS_FLAG_AF NACK received flag + * @arg @ref SMBUS_FLAG_STOPF STOP detection flag + * @arg @ref SMBUS_FLAG_TC Transfer complete (master mode) + * @arg @ref SMBUS_FLAG_TCR Transfer complete reload + * @arg @ref SMBUS_FLAG_BERR Bus error + * @arg @ref SMBUS_FLAG_ARLO Arbitration lost + * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun + * @arg @ref SMBUS_FLAG_PECERR PEC error in reception + * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref SMBUS_FLAG_ALERT SMBus alert + * @arg @ref SMBUS_FLAG_BUSY Bus busy + * @arg @ref SMBUS_FLAG_DIR Transfer direction (slave mode) + * + * @retval The new state of __FLAG__ (SET or RESET). + */ +#define SMBUS_FLAG_MASK (0x0001FFFFU) +#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) \ + (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \ + ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET) + +/** @brief Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit. + * @param __HANDLE__ specifies the SMBUS Handle. + * @param __FLAG__ specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg @ref SMBUS_FLAG_TXE Transmit data register empty + * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode) + * @arg @ref SMBUS_FLAG_AF NACK received flag + * @arg @ref SMBUS_FLAG_STOPF STOP detection flag + * @arg @ref SMBUS_FLAG_BERR Bus error + * @arg @ref SMBUS_FLAG_ARLO Arbitration lost + * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun + * @arg @ref SMBUS_FLAG_PECERR PEC error in reception + * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag + * @arg @ref SMBUS_FLAG_ALERT SMBus alert + * + * @retval None + */ +#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == SMBUS_FLAG_TXE) ? \ + ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \ + ((__HANDLE__)->Instance->ICR = (__FLAG__))) + +/** @brief Enable the specified SMBUS peripheral. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Disable the specified SMBUS peripheral. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE)) + +/** @brief Generate a Non-Acknowledge SMBUS peripheral in Slave mode. + * @param __HANDLE__ specifies the SMBUS Handle. + * @retval None + */ +#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK)) + +/** + * @} + */ + + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Macro SMBUS Private Macros + * @{ + */ + +#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \ + ((FILTER) == SMBUS_ANALOGFILTER_DISABLE)) + +#define IS_SMBUS_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU) + +#define IS_SMBUS_ADDRESSING_MODE(MODE) ((MODE) == SMBUS_ADDRESSINGMODE_7BIT) + +#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \ + ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE)) + +#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \ + ((MASK) == SMBUS_OA2_MASK01) || \ + ((MASK) == SMBUS_OA2_MASK02) || \ + ((MASK) == SMBUS_OA2_MASK03) || \ + ((MASK) == SMBUS_OA2_MASK04) || \ + ((MASK) == SMBUS_OA2_MASK05) || \ + ((MASK) == SMBUS_OA2_MASK06) || \ + ((MASK) == SMBUS_OA2_MASK07)) + +#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLE) || \ + ((CALL) == SMBUS_GENERALCALL_ENABLE)) + +#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLE) || \ + ((STRETCH) == SMBUS_NOSTRETCH_ENABLE)) + +#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLE) || \ + ((PEC) == SMBUS_PEC_ENABLE)) + +#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \ + ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \ + ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP)) + +#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \ + ((MODE) == SMBUS_AUTOEND_MODE) || \ + ((MODE) == SMBUS_SOFTEND_MODE) || \ + ((MODE) == SMBUS_SENDPEC_MODE) || \ + ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \ + ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | \ + SMBUS_RELOAD_MODE ))) + + +#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \ + ((REQUEST) == SMBUS_GENERATE_START_READ) || \ + ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \ + ((REQUEST) == SMBUS_NO_STARTSTOP)) + + +#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) || \ + ((REQUEST) == SMBUS_FIRST_FRAME) || \ + ((REQUEST) == SMBUS_NEXT_FRAME) || \ + ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_FIRST_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC)) + +#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) || \ + ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC) || \ + ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC)) + +#define SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= \ + (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | \ + I2C_CR1_PECEN))) +#define SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \ + (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \ + I2C_CR2_NBYTES | I2C_CR2_RELOAD | \ + I2C_CR2_RD_WRN))) + +#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? \ + (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \ + (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \ + (~I2C_CR2_RD_WRN)) : \ + (uint32_t)((((uint32_t)(__ADDRESS__) & \ + (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | \ + (I2C_CR2_START)) & (~I2C_CR2_RD_WRN))) + +#define SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U) +#define SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U) +#define SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND) +#define SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE) +#define SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN) + +#define SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \ + ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET) +#define SMBUS_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET) + +#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU) +#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU) + +/** + * @} + */ + +/* Include SMBUS HAL Extended module */ +#include "stm32wl3x_hal_smbus_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions + * @{ + */ + +/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter); +HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID, + pSMBUS_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, + pSMBUS_AddrCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +/** @addtogroup Blocking_mode_Polling Blocking mode Polling + * @{ + */ +/******* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout); +/** + * @} + */ + +/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt + * @{ + */ +/******* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, + uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, + uint8_t *pData, uint16_t Size, uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress); +HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); +HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions); + +HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus); +HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus); +/** + * @} + */ + +/** @addtogroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ +/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */ +void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); +void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus); +void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus); + +/** + * @} + */ + +/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +uint32_t HAL_SMBUS_GetState(const SMBUS_HandleTypeDef *hsmbus); +uint32_t HAL_SMBUS_GetError(const SMBUS_HandleTypeDef *hsmbus); + +/** + * @} + */ + +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Functions SMBUS Private Functions + * @{ + */ +/* Private functions are defined in stm32wl3x_hal_smbus.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32WL3x_HAL_SMBUS_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smbus_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smbus_ex.h new file mode 100644 index 0000000000..2e459cf710 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_smbus_ex.h @@ -0,0 +1,148 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_smbus_ex.h + * @author MCD Application Team + * @brief Header file of SMBUS HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_SMBUS_EX_H +#define STM32WL3x_HAL_SMBUS_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup SMBUSEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SMBUSEx_Exported_Constants SMBUS Extended Exported Constants + * @{ + */ + +/** @defgroup SMBUSEx_FastModePlus SMBUS Extended Fast Mode Plus + * @{ + */ +#define SMBUS_FASTMODEPLUS_PA0 SYSCFG_I2C_FMP_CTRL_I2C1_PA0_FMP /*!< Enable Fast Mode Plus on PA0 */ +#define SMBUS_FASTMODEPLUS_PA1 SYSCFG_I2C_FMP_CTRL_I2C1_PA1_FMP /*!< Enable Fast Mode Plus on PA1 */ +#define SMBUS_FASTMODEPLUS_PB6 SYSCFG_I2C_FMP_CTRL_I2C1_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#define SMBUS_FASTMODEPLUS_PB7 SYSCFG_I2C_FMP_CTRL_I2C1_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#define SMBUS_FASTMODEPLUS_PB10 SYSCFG_I2C_FMP_CTRL_I2C1_PB10_FMP /*!< Enable Fast Mode Plus on PB10 */ +#define SMBUS_FASTMODEPLUS_PB11 SYSCFG_I2C_FMP_CTRL_I2C1_PB11_FMP /*!< Enable Fast Mode Plus on PB11 */ +#define SMBUS_FASTMODEPLUS_PA6 SYSCFG_I2C_FMP_CTRL_I2C2_PA6_FMP /*!< Enable Fast Mode Plus on PA6 */ +#define SMBUS_FASTMODEPLUS_PA7 SYSCFG_I2C_FMP_CTRL_I2C2_PA7_FMP /*!< Enable Fast Mode Plus on PA7 */ +#define SMBUS_FASTMODEPLUS_PA13 SYSCFG_I2C_FMP_CTRL_I2C2_PA13_FMP /*!< Enable Fast Mode Plus on PA13 */ +#define SMBUS_FASTMODEPLUS_PA14 SYSCFG_I2C_FMP_CTRL_I2C2_PA14_FMP /*!< Enable Fast Mode Plus on PA14 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SMBUSEx_Exported_Macros SMBUS Extended Exported Macros + * @{ + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SMBUSEx_Exported_Functions SMBUS Extended Exported Functions + * @{ + */ + +/** @addtogroup SMBUSEx_Exported_Functions_Group2 WakeUp Mode Functions + * @{ + */ +/* Peripheral Control functions ************************************************/ +/** + * @} + */ + +/** @addtogroup SMBUSEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @{ + */ +void HAL_SMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus); +void HAL_SMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SMBUSEx_Private_Constants SMBUS Extended Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SMBUSEx_Private_Macro SMBUS Extended Private Macros + * @{ + */ +#define IS_SMBUS_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB6)) == SMBUS_FASTMODEPLUS_PB6) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB7)) == SMBUS_FASTMODEPLUS_PB7) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA0)) == SMBUS_FASTMODEPLUS_PA0) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA1)) == SMBUS_FASTMODEPLUS_PA1) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA1)) == SMBUS_FASTMODEPLUS_PB10) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA1)) == SMBUS_FASTMODEPLUS_PB11) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA1)) == SMBUS_FASTMODEPLUS_PA6) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA1)) == SMBUS_FASTMODEPLUS_PA7) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA1)) == SMBUS_FASTMODEPLUS_PA13) || \ + (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA1)) == SMBUS_FASTMODEPLUS_PA14)) +/** + * @} + */ + +/* Private Functions ---------------------------------------------------------*/ +/** @defgroup SMBUSEx_Private_Functions SMBUS Extended Private Functions + * @{ + */ +/* Private functions are defined in stm32wl3x_hal_smbus_ex.c file */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_SMBUS_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_spi.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_spi.h new file mode 100644 index 0000000000..7eb63e1a07 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_spi.h @@ -0,0 +1,850 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_spi.h + * @author MCD Application Team + * @brief Header file of SPI HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_SPI_H +#define STM32WL3x_HAL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPI_Exported_Types SPI Exported Types + * @{ + */ + +/** + * @brief SPI Configuration Structure definition + */ +typedef struct +{ + uint32_t Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_Mode */ + + uint32_t Direction; /*!< Specifies the SPI bidirectional mode state. + This parameter can be a value of @ref SPI_Direction */ + + uint32_t DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_Data_Size */ + + uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. + This parameter can be a value of @ref SPI_TI_mode */ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_CRC_Calculation */ + + uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be an odd number between Min_Data = 1 and Max_Data = 65535 */ + + uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation. + CRC Length is only used with Data8 and Data16, not other data size + This parameter can be a value of @ref SPI_CRC_length */ + + uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not . + This parameter can be a value of @ref SPI_NSSP_Mode + This mode is activated by the NSSP bit in the SPIx_CR2 register and + it takes effect only if the SPI interface is configured as Motorola SPI + master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0, + CPOL setting is ignored).. */ +} SPI_InitTypeDef; + +/** + * @brief HAL SPI State structure definition + */ +typedef enum +{ + HAL_SPI_STATE_RESET = 0x00U, /*!< Peripheral not Initialized */ + HAL_SPI_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_SPI_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_SPI_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ + HAL_SPI_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ + HAL_SPI_STATE_BUSY_TX_RX = 0x05U, /*!< Data Transmission and Reception process is ongoing */ + HAL_SPI_STATE_ERROR = 0x06U, /*!< SPI error state */ + HAL_SPI_STATE_ABORT = 0x07U /*!< SPI abort is ongoing */ +} HAL_SPI_StateTypeDef; + +/** + * @brief SPI handle Structure definition + */ +typedef struct __SPI_HandleTypeDef +{ + SPI_TypeDef *Instance; /*!< SPI registers base address */ + + SPI_InitTypeDef Init; /*!< SPI communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< SPI Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< SPI Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */ + + uint32_t CRCSize; /*!< SPI CRC size used for the transfer */ + + void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx ISR */ + + void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx ISR */ + + DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */ + + __IO uint32_t ErrorCode; /*!< SPI Error code */ + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + void (* TxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Completed callback */ + void (* RxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Completed callback */ + void (* TxRxCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Completed callback */ + void (* TxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Tx Half Completed callback */ + void (* RxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Rx Half Completed callback */ + void (* TxRxHalfCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI TxRx Half Completed callback */ + void (* ErrorCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Error callback */ + void (* AbortCpltCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Abort callback */ + void (* MspInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp Init callback */ + void (* MspDeInitCallback)(struct __SPI_HandleTypeDef *hspi); /*!< SPI Msp DeInit callback */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} SPI_HandleTypeDef; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief HAL SPI Callback ID enumeration definition + */ +typedef enum +{ + HAL_SPI_TX_COMPLETE_CB_ID = 0x00U, /*!< SPI Tx Completed callback ID */ + HAL_SPI_RX_COMPLETE_CB_ID = 0x01U, /*!< SPI Rx Completed callback ID */ + HAL_SPI_TX_RX_COMPLETE_CB_ID = 0x02U, /*!< SPI TxRx Completed callback ID */ + HAL_SPI_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< SPI Tx Half Completed callback ID */ + HAL_SPI_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< SPI Rx Half Completed callback ID */ + HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID = 0x05U, /*!< SPI TxRx Half Completed callback ID */ + HAL_SPI_ERROR_CB_ID = 0x06U, /*!< SPI Error callback ID */ + HAL_SPI_ABORT_CB_ID = 0x07U, /*!< SPI Abort callback ID */ + HAL_SPI_MSPINIT_CB_ID = 0x08U, /*!< SPI Msp Init callback ID */ + HAL_SPI_MSPDEINIT_CB_ID = 0x09U /*!< SPI Msp DeInit callback ID */ + +} HAL_SPI_CallbackIDTypeDef; + +/** + * @brief HAL SPI Callback pointer definition + */ +typedef void (*pSPI_CallbackTypeDef)(SPI_HandleTypeDef *hspi); /*!< pointer to an SPI callback function */ + +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_Error_Code SPI Error Code + * @{ + */ +#define HAL_SPI_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_SPI_ERROR_MODF (0x00000001U) /*!< MODF error */ +#define HAL_SPI_ERROR_CRC (0x00000002U) /*!< CRC error */ +#define HAL_SPI_ERROR_OVR (0x00000004U) /*!< OVR error */ +#define HAL_SPI_ERROR_FRE (0x00000008U) /*!< FRE error */ +#define HAL_SPI_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_SPI_ERROR_FLAG (0x00000020U) /*!< Error on RXNE/TXE/BSY/FTLVL/FRLVL Flag */ +#define HAL_SPI_ERROR_ABORT (0x00000040U) /*!< Error during SPI Abort procedure */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define HAL_SPI_ERROR_INVALID_CALLBACK (0x00000080U) /*!< Invalid Callback error */ +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Mode SPI Mode + * @{ + */ +#define SPI_MODE_SLAVE (0x00000000U) +#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) +/** + * @} + */ + +/** @defgroup SPI_Direction SPI Direction Mode + * @{ + */ +#define SPI_DIRECTION_2LINES (0x00000000U) +#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY +#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE +/** + * @} + */ + +/** @defgroup SPI_Data_Size SPI Data Size + * @{ + */ +#define SPI_DATASIZE_4BIT (0x00000300U) +#define SPI_DATASIZE_5BIT (0x00000400U) +#define SPI_DATASIZE_6BIT (0x00000500U) +#define SPI_DATASIZE_7BIT (0x00000600U) +#define SPI_DATASIZE_8BIT (0x00000700U) +#define SPI_DATASIZE_9BIT (0x00000800U) +#define SPI_DATASIZE_10BIT (0x00000900U) +#define SPI_DATASIZE_11BIT (0x00000A00U) +#define SPI_DATASIZE_12BIT (0x00000B00U) +#define SPI_DATASIZE_13BIT (0x00000C00U) +#define SPI_DATASIZE_14BIT (0x00000D00U) +#define SPI_DATASIZE_15BIT (0x00000E00U) +#define SPI_DATASIZE_16BIT (0x00000F00U) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity SPI Clock Polarity + * @{ + */ +#define SPI_POLARITY_LOW (0x00000000U) +#define SPI_POLARITY_HIGH SPI_CR1_CPOL +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase SPI Clock Phase + * @{ + */ +#define SPI_PHASE_1EDGE (0x00000000U) +#define SPI_PHASE_2EDGE SPI_CR1_CPHA +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management SPI Slave Select Management + * @{ + */ +#define SPI_NSS_SOFT SPI_CR1_SSM +#define SPI_NSS_HARD_INPUT (0x00000000U) +#define SPI_NSS_HARD_OUTPUT (SPI_CR2_SSOE << 16U) +/** + * @} + */ + +/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode + * @{ + */ +#define SPI_NSS_PULSE_ENABLE SPI_CR2_NSSP +#define SPI_NSS_PULSE_DISABLE (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler + * @{ + */ +#define SPI_BAUDRATEPRESCALER_2 (0x00000000U) +#define SPI_BAUDRATEPRESCALER_4 (SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_8 (SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_32 (SPI_CR1_BR_2) +#define SPI_BAUDRATEPRESCALER_64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) +#define SPI_BAUDRATEPRESCALER_128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) +#define SPI_BAUDRATEPRESCALER_256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transmission + * @{ + */ +#define SPI_FIRSTBIT_MSB (0x00000000U) +#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST +/** + * @} + */ + +/** @defgroup SPI_TI_mode SPI TI Mode + * @{ + */ +#define SPI_TIMODE_DISABLE (0x00000000U) +#define SPI_TIMODE_ENABLE SPI_CR2_FRF +/** + * @} + */ + +/** @defgroup SPI_CRC_Calculation SPI CRC Calculation + * @{ + */ +#define SPI_CRCCALCULATION_DISABLE (0x00000000U) +#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN +/** + * @} + */ + +/** @defgroup SPI_CRC_length SPI CRC Length + * @{ + * This parameter can be one of the following values: + * SPI_CRC_LENGTH_DATASIZE: aligned with the data size + * SPI_CRC_LENGTH_8BIT : CRC 8bit + * SPI_CRC_LENGTH_16BIT : CRC 16bit + */ +#define SPI_CRC_LENGTH_DATASIZE (0x00000000U) +#define SPI_CRC_LENGTH_8BIT (0x00000001U) +#define SPI_CRC_LENGTH_16BIT (0x00000002U) +/** + * @} + */ + +/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold + * @{ + * This parameter can be one of the following values: + * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF : + * RXNE event is generated if the FIFO + * level is greater or equal to 1/4(8-bits). + * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO + * level is greater or equal to 1/2(16 bits). */ +#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH +#define SPI_RXFIFO_THRESHOLD_HF (0x00000000U) +/** + * @} + */ + +/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition + * @{ + */ +#define SPI_IT_TXE SPI_CR2_TXEIE +#define SPI_IT_RXNE SPI_CR2_RXNEIE +#define SPI_IT_ERR SPI_CR2_ERRIE +/** + * @} + */ + +/** @defgroup SPI_Flags_definition SPI Flags Definition + * @{ + */ +#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */ +#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */ +#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */ +#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */ +#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */ +#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */ +#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */ +#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */ +#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */ +#define SPI_FLAG_MASK (SPI_SR_RXNE | SPI_SR_TXE | SPI_SR_BSY | SPI_SR_CRCERR\ + | SPI_SR_MODF | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_FTLVL | SPI_SR_FRLVL) +/** + * @} + */ + +/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level + * @{ + */ +#define SPI_FTLVL_EMPTY (0x00000000U) +#define SPI_FTLVL_QUARTER_FULL (0x00000800U) +#define SPI_FTLVL_HALF_FULL (0x00001000U) +#define SPI_FTLVL_FULL (0x00001800U) + +/** + * @} + */ + +/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level + * @{ + */ +#define SPI_FRLVL_EMPTY (0x00000000U) +#define SPI_FRLVL_QUARTER_FULL (0x00000200U) +#define SPI_FRLVL_HALF_FULL (0x00000400U) +#define SPI_FRLVL_FULL (0x00000600U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPI_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @brief Reset SPI handle state. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_SPI_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + +/** @brief Enable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to enable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Disable the specified SPI interrupts. + * @param __HANDLE__ specifies the SPI handle. + * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the interrupt source to disable. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval None + */ +#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__)) + +/** @brief Check whether the specified SPI interrupt source is enabled or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ + & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the SPI CRCERR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR)) + +/** @brief Clear the SPI MODF pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_modf = 0x00U; \ + tmpreg_modf = (__HANDLE__)->Instance->SR; \ + CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE); \ + UNUSED(tmpreg_modf); \ + } while(0U) + +/** @brief Clear the SPI OVR pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_ovr = 0x00U; \ + tmpreg_ovr = (__HANDLE__)->Instance->DR; \ + tmpreg_ovr = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_ovr); \ + } while(0U) + +/** @brief Clear the SPI FRE pending flag. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ + do{ \ + __IO uint32_t tmpreg_fre = 0x00U; \ + tmpreg_fre = (__HANDLE__)->Instance->SR; \ + UNUSED(tmpreg_fre); \ + }while(0U) + +/** @brief Enable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** @brief Disable the SPI peripheral. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_Private_Macros SPI Private Macros + * @{ + */ + +/** @brief Set the SPI transmit-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Set the SPI receive-only mode. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE) + +/** @brief Reset the CRC calculation of the SPI. + * @param __HANDLE__ specifies the SPI Handle. + * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. + * @retval None + */ +#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\ + SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0U) + +/** @brief Check whether the specified SPI flag is set or not. + * @param __SR__ copy of SPI SR register. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPI_FLAG_RXNE: Receive buffer not empty flag + * @arg SPI_FLAG_TXE: Transmit buffer empty flag + * @arg SPI_FLAG_CRCERR: CRC error flag + * @arg SPI_FLAG_MODF: Mode fault flag + * @arg SPI_FLAG_OVR: Overrun flag + * @arg SPI_FLAG_BSY: Busy flag + * @arg SPI_FLAG_FRE: Frame format error flag + * @arg SPI_FLAG_FTLVL: SPI fifo transmission level + * @arg SPI_FLAG_FRLVL: SPI fifo reception level + * @retval SET or RESET. + */ +#define SPI_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__) & ((__FLAG__) & SPI_FLAG_MASK)) == \ + ((__FLAG__) & SPI_FLAG_MASK)) ? SET : RESET) + +/** @brief Check whether the specified SPI Interrupt is set or not. + * @param __CR2__ copy of SPI CR2 register. + * @param __INTERRUPT__ specifies the SPI interrupt source to check. + * This parameter can be one of the following values: + * @arg SPI_IT_TXE: Tx buffer empty interrupt enable + * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable + * @arg SPI_IT_ERR: Error interrupt enable + * @retval SET or RESET. + */ +#define SPI_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__) & (__INTERRUPT__)) == \ + (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks if SPI Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Mode. + * This parameter can be a value of @ref SPI_Mode + * @retval None + */ +#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || \ + ((__MODE__) == SPI_MODE_MASTER)) + +/** @brief Checks if SPI Direction Mode parameter is in allowed range. + * @param __MODE__ specifies the SPI Direction Mode. + * This parameter can be a value of @ref SPI_Direction + * @retval None + */ +#define IS_SPI_DIRECTION(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Direction Mode parameter is 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES) + +/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines. + * @param __MODE__ specifies the SPI Direction Mode. + * @retval None + */ +#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \ + ((__MODE__) == SPI_DIRECTION_1LINE)) + +/** @brief Checks if SPI Data Size parameter is in allowed range. + * @param __DATASIZE__ specifies the SPI Data Size. + * This parameter can be a value of @ref SPI_Data_Size + * @retval None + */ +#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_15BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_14BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_13BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_12BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_11BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_10BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_9BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_8BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_7BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_6BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_5BIT) || \ + ((__DATASIZE__) == SPI_DATASIZE_4BIT)) + +/** @brief Checks if SPI Serial clock steady state parameter is in allowed range. + * @param __CPOL__ specifies the SPI serial clock steady state. + * This parameter can be a value of @ref SPI_Clock_Polarity + * @retval None + */ +#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \ + ((__CPOL__) == SPI_POLARITY_HIGH)) + +/** @brief Checks if SPI Clock Phase parameter is in allowed range. + * @param __CPHA__ specifies the SPI Clock Phase. + * This parameter can be a value of @ref SPI_Clock_Phase + * @retval None + */ +#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \ + ((__CPHA__) == SPI_PHASE_2EDGE)) + +/** @brief Checks if SPI Slave Select parameter is in allowed range. + * @param __NSS__ specifies the SPI Slave Select management parameter. + * This parameter can be a value of @ref SPI_Slave_Select_management + * @retval None + */ +#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \ + ((__NSS__) == SPI_NSS_HARD_INPUT) || \ + ((__NSS__) == SPI_NSS_HARD_OUTPUT)) + +/** @brief Checks if SPI NSS Pulse parameter is in allowed range. + * @param __NSSP__ specifies the SPI NSS Pulse Mode parameter. + * This parameter can be a value of @ref SPI_NSSP_Mode + * @retval None + */ +#define IS_SPI_NSSP(__NSSP__) (((__NSSP__) == SPI_NSS_PULSE_ENABLE) || \ + ((__NSSP__) == SPI_NSS_PULSE_DISABLE)) + +/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range. + * @param __PRESCALER__ specifies the SPI Baudrate prescaler. + * This parameter can be a value of @ref SPI_BaudRate_Prescaler + * @retval None + */ +#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \ + ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256)) + +/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range. + * @param __BIT__ specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit). + * This parameter can be a value of @ref SPI_MSB_LSB_transmission + * @retval None + */ +#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \ + ((__BIT__) == SPI_FIRSTBIT_LSB)) + +/** @brief Checks if SPI TI mode parameter is in allowed range. + * @param __MODE__ specifies the SPI TI mode. + * This parameter can be a value of @ref SPI_TI_mode + * @retval None + */ +#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \ + ((__MODE__) == SPI_TIMODE_ENABLE)) + +/** @brief Checks if SPI CRC calculation enabled state is in allowed range. + * @param __CALCULATION__ specifies the SPI CRC calculation enable state. + * This parameter can be a value of @ref SPI_CRC_Calculation + * @retval None + */ +#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \ + ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE)) + +/** @brief Checks if SPI CRC length is in allowed range. + * @param __LENGTH__ specifies the SPI CRC length. + * This parameter can be a value of @ref SPI_CRC_length + * @retval None + */ +#define IS_SPI_CRC_LENGTH(__LENGTH__) (((__LENGTH__) == SPI_CRC_LENGTH_DATASIZE) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_8BIT) || \ + ((__LENGTH__) == SPI_CRC_LENGTH_16BIT)) + +/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range. + * @param __POLYNOMIAL__ specifies the SPI polynomial value to be used for the CRC calculation. + * This parameter must be a number between Min_Data = 0 and Max_Data = 65535 + * @retval None + */ +#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1U) && \ + ((__POLYNOMIAL__) <= 0xFFFFU) && \ + (((__POLYNOMIAL__)&0x1U) != 0U)) + +/** @brief Checks if DMA handle is valid. + * @param __HANDLE__ specifies a DMA Handle. + * @retval None + */ +#define IS_SPI_DMA_HANDLE(__HANDLE__) ((__HANDLE__) != NULL) + +/** + * @} + */ + +/* Include SPI HAL Extended module */ +#include "stm32wl3x_hal_spi_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions ********************************/ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); +void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi); +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi); + +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); +void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** @addtogroup SPI_Exported_Functions_Group3 + * @{ + */ +/* Peripheral State and Error functions ***************************************/ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_SPI_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_spi_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_spi_ex.h new file mode 100644 index 0000000000..60bc37fdec --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_spi_ex.h @@ -0,0 +1,72 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_spi_ex.h + * @author MCD Application Team + * @brief Header file of SPI HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_SPI_EX_H +#define STM32WL3x_HAL_SPI_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup SPIEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPIEx_Exported_Functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +/* IO operation functions *****************************************************/ +/** @addtogroup SPIEx_Exported_Functions_Group1 + * @{ + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi); +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_SPI_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_tim.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_tim.h new file mode 100644 index 0000000000..4281f8adf9 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_tim.h @@ -0,0 +1,2176 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_tim.h + * @author MCD Application Team + * @brief Header file of TIM HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_TIM_H +#define STM32WL3x_HAL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup TIM + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIM_Exported_Types TIM Exported Types + * @{ + */ + +/** + * @brief TIM Time base Configuration Structure definition + */ +typedef struct +{ + uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_Counter_Mode */ + + uint32_t Period; /*!< Specifies the period value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_ClockDivision */ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. */ + + uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. + This parameter can be a value of @ref TIM_AutoReloadPreload */ +} TIM_Base_InitTypeDef; + +/** + * @brief TIM Output Compare Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCFastMode; /*!< Specifies the Fast mode state. + This parameter can be a value of @ref TIM_Output_Fast_State + @note This parameter is valid only in PWM1 and PWM2 mode. */ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ +} TIM_OC_InitTypeDef; + +/** + * @brief TIM One Pulse Mode Configuration Structure definition + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the TIM mode. + This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ + + uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_Output_Compare_Polarity */ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_Output_Compare_N_Polarity + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State + @note This parameter is valid only for timer instances supporting break feature. */ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_OnePulse_InitTypeDef; + +/** + * @brief TIM Input Capture Configuration Structure definition + */ +typedef struct +{ + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Input_Capture_Polarity */ + + uint32_t ICSelection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_IC_InitTypeDef; + +/** + * @brief TIM Encoder Configuration Structure definition + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Mode */ + + uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC1Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC1Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + + uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ + + uint32_t IC2Selection; /*!< Specifies the input. + This parameter can be a value of @ref TIM_Input_Capture_Selection */ + + uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ + + uint32_t IC2Filter; /*!< Specifies the input capture filter. + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_Encoder_InitTypeDef; + +/** + * @brief Clock Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClockSource; /*!< TIM clock sources + This parameter can be a value of @ref TIM_Clock_Source */ + uint32_t ClockPolarity; /*!< TIM clock polarity + This parameter can be a value of @ref TIM_Clock_Polarity */ + uint32_t ClockPrescaler; /*!< TIM clock prescaler + This parameter can be a value of @ref TIM_Clock_Prescaler */ + uint32_t ClockFilter; /*!< TIM clock filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClockConfigTypeDef; + +/** + * @brief TIM Clear Input Configuration Handle Structure definition + */ +typedef struct +{ + uint32_t ClearInputState; /*!< TIM clear Input state + This parameter can be ENABLE or DISABLE */ + uint32_t ClearInputSource; /*!< TIM clear Input sources + This parameter can be a value of @ref TIM_ClearInput_Source */ + uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity + This parameter can be a value of @ref TIM_ClearInput_Polarity */ + uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler + This parameter must be 0: When OCRef clear feature is used with ETR source, + ETR prescaler must be off */ + uint32_t ClearInputFilter; /*!< TIM Clear Input filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ +} TIM_ClearInputConfigTypeDef; + +/** + * @brief TIM Master configuration Structure definition + */ +typedef struct +{ + uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection + This parameter can be a value of @ref TIM_Master_Mode_Selection */ + uint32_t MasterSlaveMode; /*!< Master/slave mode selection + This parameter can be a value of @ref TIM_Master_Slave_Mode + @note When the Master/slave mode is enabled, the effect of + an event on the trigger input (TRGI) is delayed to allow a + perfect synchronization between the current timer and its + slaves (through TRGO). It is not mandatory in case of timer + synchronization mode. */ +} TIM_MasterConfigTypeDef; + +/** + * @brief TIM Slave configuration Structure definition + */ +typedef struct +{ + uint32_t SlaveMode; /*!< Slave mode selection + This parameter can be a value of @ref TIM_Slave_Mode */ + uint32_t InputTrigger; /*!< Input Trigger source + This parameter can be a value of @ref TIM_Trigger_Selection */ + uint32_t TriggerPolarity; /*!< Input Trigger polarity + This parameter can be a value of @ref TIM_Trigger_Polarity */ + uint32_t TriggerPrescaler; /*!< Input trigger prescaler + This parameter can be a value of @ref TIM_Trigger_Prescaler */ + uint32_t TriggerFilter; /*!< Input trigger filter + This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ + +} TIM_SlaveConfigTypeDef; + +/** + * @brief TIM Break input(s) and Dead time configuration Structure definition + * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable + * filter and polarity. + */ +typedef struct +{ + uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ + + uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ + + uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ + + uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ + + uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ + + uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ + + + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input.This parameter can be a value of @ref TIM_Break_Input_AF_Mode */ + + uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ + +} TIM_BreakDeadTimeConfigTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ + HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ + HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ +} HAL_TIM_StateTypeDef; + +/** + * @brief TIM Channel States definition + */ +typedef enum +{ + HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ + HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ + HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ +} HAL_TIM_ChannelStateTypeDef; + +/** + * @brief DMA Burst States definition + */ +typedef enum +{ + HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ + HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ + HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ +} HAL_TIM_DMABurstStateTypeDef; + +/** + * @brief HAL Active channel structures definition + */ +typedef enum +{ + HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ + HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ + HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ + HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ + HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ +} HAL_TIM_ActiveChannel; + +/** + * @brief TIM Time Base Handle Structure definition + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +typedef struct __TIM_HandleTypeDef +#else +typedef struct +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +{ + TIM_TypeDef *Instance; /*!< Register base address */ + TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ + HAL_TIM_ActiveChannel Channel; /*!< Active channel */ + DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array + This array is accessed by a @ref DMA_Handle_index */ + HAL_LockTypeDef Lock; /*!< Locking object */ + __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelState[4]; /*!< TIM channel operation state */ + __IO HAL_TIM_ChannelStateTypeDef ChannelNState[1]; /*!< TIM complementary channel operation state */ + __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ + void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ + void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ + void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ + void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ + void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ + void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ + void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ + void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ + void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ + void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ + void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ + void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ + void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ + void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ + void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ + void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ + void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ + void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ + void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ + void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ + void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ + void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ + void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} TIM_HandleTypeDef; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief HAL TIM Callback ID enumeration definition + */ +typedef enum +{ + HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ + , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ + , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ + , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ + , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ + , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ + , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ + , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ + , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ + , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ + , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ + , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ + , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ + , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ + , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ + , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ + , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ + , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ + , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ + , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ + , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ +} HAL_TIM_CallbackIDTypeDef; + +/** + * @brief HAL TIM Callback pointer definition + */ +typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ + +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_ClearInput_Source TIM Clear Input Source + * @{ + */ +#define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ +#define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ +#define TIM_CLEARINPUTSOURCE_OCREFCLR 0x00000002U /*!< OCREF_CLR is connected to OCREF_CLR_INT */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Base_address TIM DMA Base Address + * @{ + */ +#define TIM_DMABASE_CR1 0x00000000U +#define TIM_DMABASE_CR2 0x00000001U +#define TIM_DMABASE_SMCR 0x00000002U +#define TIM_DMABASE_DIER 0x00000003U +#define TIM_DMABASE_SR 0x00000004U +#define TIM_DMABASE_EGR 0x00000005U +#define TIM_DMABASE_CCMR1 0x00000006U +#define TIM_DMABASE_CCMR2 0x00000007U +#define TIM_DMABASE_CCER 0x00000008U +#define TIM_DMABASE_CNT 0x00000009U +#define TIM_DMABASE_PSC 0x0000000AU +#define TIM_DMABASE_ARR 0x0000000BU +#define TIM_DMABASE_RCR 0x0000000CU +#define TIM_DMABASE_CCR1 0x0000000DU +#define TIM_DMABASE_CCR2 0x0000000EU +#define TIM_DMABASE_CCR3 0x0000000FU +#define TIM_DMABASE_CCR4 0x00000010U +#define TIM_DMABASE_BDTR 0x00000011U +#define TIM_DMABASE_DCR 0x00000012U +#define TIM_DMABASE_DMAR 0x00000013U +#define TIM_DMABASE_OR 0x00000014U +#define TIM_DMABASE_AF1 0x00000018U +/** + * @} + */ + +/** @defgroup TIM_Event_Source TIM Event Source + * @{ + */ +#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ +#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ +#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ +#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ +#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ +#define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ +#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ +#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ +/** + * @} + */ + +/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity + * @{ + */ +#define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ +#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Polarity TIM ETR Polarity + * @{ + */ +#define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ +#define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ +/** + * @} + */ + +/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler + * @{ + */ +#define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ +#define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ +#define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ +#define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ +/** + * @} + */ + +/** @defgroup TIM_Counter_Mode TIM Counter Mode + * @{ + */ +#define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ +#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ +#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ +#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ +#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ +/** + * @} + */ + +/** @defgroup TIM_Update_Interrupt_Flag_Remap TIM Update Interrupt Flag Remap + * @{ + */ +#define TIM_UIFREMAP_DISABLE 0x00000000U /*!< Update interrupt flag remap disabled */ +#define TIM_UIFREMAP_ENABLE TIM_CR1_UIFREMAP /*!< Update interrupt flag remap enabled */ +/** + * @} + */ + +/** @defgroup TIM_ClockDivision TIM Clock Division + * @{ + */ +#define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ +#define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ +#define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_State TIM Output Compare State + * @{ + */ +#define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ +#define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ +/** + * @} + */ + +/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload + * @{ + */ +#define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ +#define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ + +/** + * @} + */ + +/** @defgroup TIM_Output_Fast_State TIM Output Fast State + * @{ + */ +#define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ +#define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State + * @{ + */ +#define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ +#define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity + * @{ + */ +#define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ +#define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity + * @{ + */ +#define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ +#define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State + * @{ + */ +#define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ +#define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State + * @{ + */ +#define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ +#define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity + * @{ + */ +#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ +#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ +#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity + * @{ + */ +#define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ +#define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection + * @{ + */ +#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ +#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ +#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ +/** + * @} + */ + +/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler + * @{ + */ +#define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ +#define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ +#define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ +#define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ +/** + * @} + */ + +/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode + * @{ + */ +#define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_Encoder_Mode TIM Encoder Mode + * @{ + */ +#define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ +#define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ +#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ +/** + * @} + */ + +/** @defgroup TIM_Interrupt_definition TIM interrupt Definition + * @{ + */ +#define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ +#define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ +#define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ +#define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ +#define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ +#define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ +#define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ +#define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ +/** + * @} + */ + +/** @defgroup TIM_Commutation_Source TIM Commutation Source + * @{ + */ +#define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ +#define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ +/** + * @} + */ + +/** @defgroup TIM_DMA_sources TIM DMA Sources + * @{ + */ +#define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ +#define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ +#define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ +#define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ +#define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ +#define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ +/** + * @} + */ + +/** @defgroup TIM_CC_DMA_Request CCx DMA request selection + * @{ + */ +#define TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when capture or compare match event occurs */ +#define TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_Flag_definition TIM Flag Definition + * @{ + */ +#define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ +#define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ +#define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ +#define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ +#define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ +#define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ +#define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ +#define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ +#define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ +#define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ +#define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ +#define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ +/** + * @} + */ + +/** @defgroup TIM_Channel TIM Channel + * @{ + */ +#define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ +#define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ +#define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ +#define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ +#define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Source TIM Clock Source + * @{ + */ +#define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ +#define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ +#define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ +#define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ +#define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ +#define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ +#define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Polarity TIM Clock Polarity + * @{ + */ +#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ +#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ +#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ +/** + * @} + */ + +/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler + * @{ + */ +#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ +#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ +#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity + * @{ + */ +#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ +#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ +/** + * @} + */ + +/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler + * @{ + */ +#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ +#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state + * @{ + */ +#define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ + +/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state + * @{ + */ +#define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ +#define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ +/** + * @} + */ +/** @defgroup TIM_Lock_level TIM Lock level + * @{ + */ +#define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ +#define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable + * @{ + */ +#define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ +#define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ +/** + * @} + */ + +/** @defgroup TIM_Break_Polarity TIM Break Input Polarity + * @{ + */ +#define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ +#define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ +/** + * @} + */ + +/** @defgroup TIM_Break_Input_AF_Mode TIM Break Input Alternate Function Mode + * @{ + */ +#define TIM_BREAK_AFMODE_INPUT 0x00000000U /*!< Break input BRK in input mode */ +#define TIM_BREAK_AFMODE_BIDIRECTIONAL TIM_BDTR_BKBID /*!< Break input BRK in bidirectional mode */ +/** + * @} + */ + +/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable + * @{ + */ +#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection + * @{ + */ +#define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ +#define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ +#define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ +#define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ +#define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ +#define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ +/** + * @} + */ + +/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode + * @{ + */ +#define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ +#define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ +/** + * @} + */ + +/** @defgroup TIM_Slave_Mode TIM Slave mode + * @{ + */ +#define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ +#define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ +#define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ +#define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ +#define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ +#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3 /*!< Combined reset + trigger mode */ +/** + * @} + */ + +/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes + * @{ + */ +#define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ +#define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ +#define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ +#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ +#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ +#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ +#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ +#define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ +#define TIM_OCMODE_RETRIGERRABLE_OPM1 TIM_CCMR1_OC1M_3 /*!< Retrigerrable OPM mode 1 */ +#define TIM_OCMODE_RETRIGERRABLE_OPM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0) /*!< Retrigerrable OPM mode 2 */ +#define TIM_OCMODE_COMBINED_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 1 */ +#define TIM_OCMODE_COMBINED_PWM2 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) /*!< Combined PWM mode 2 */ +#define TIM_OCMODE_ASYMMETRIC_PWM1 (TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) /*!< Asymmetric PWM mode 1 */ +#define TIM_OCMODE_ASYMMETRIC_PWM2 TIM_CCMR1_OC1M /*!< Asymmetric PWM mode 2 */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Selection TIM Trigger Selection + * @{ + */ +#define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ +#define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ +#define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ +#define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ +#define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ +#define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity + * @{ + */ +#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ +#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ +/** + * @} + */ + +/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler + * @{ + */ +#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ +#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ +#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ +#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ +/** + * @} + */ + +/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection + * @{ + */ +#define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ +#define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ +/** + * @} + */ + +/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length + * @{ + */ +#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ +/** + * @} + */ + +/** @defgroup DMA_Handle_index TIM DMA Handle Index + * @{ + */ +#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ +#define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ +#define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ +#define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ +#define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ +#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ +/** + * @} + */ + +/** @defgroup Channel_CC_State TIM Capture/Compare Channel State + * @{ + */ +#define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ +#define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ +#define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ +#define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup TIM_Exported_Macros TIM Exported Macros + * @{ + */ + +/** @brief Reset TIM handle state. + * @param __HANDLE__ TIM handle. + * @retval None + */ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + (__HANDLE__)->Base_MspInitCallback = NULL; \ + (__HANDLE__)->Base_MspDeInitCallback = NULL; \ + (__HANDLE__)->IC_MspInitCallback = NULL; \ + (__HANDLE__)->IC_MspDeInitCallback = NULL; \ + (__HANDLE__)->OC_MspInitCallback = NULL; \ + (__HANDLE__)->OC_MspDeInitCallback = NULL; \ + (__HANDLE__)->PWM_MspInitCallback = NULL; \ + (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ + (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspInitCallback = NULL; \ + (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ + } while(0) +#else +#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ + (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ + (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ + (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ + } while(0) +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @brief Enable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) + +/** + * @brief Enable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) + +/** + * @brief Disable the TIM peripheral. + * @param __HANDLE__ TIM handle + * @retval None + */ +#define __HAL_TIM_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been + * disabled + */ +#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ + do { \ + if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ + { \ + if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ + { \ + (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ + } \ + } \ + } while(0) + +/** + * @brief Disable the TIM main Output. + * @param __HANDLE__ TIM handle + * @retval None + * @note The Main Output Enable of a timer instance is disabled unconditionally + */ +#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) + +/** @brief Enable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to enable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) + +/** @brief Disable the specified TIM interrupt. + * @param __HANDLE__ specifies the TIM Handle. + * @param __INTERRUPT__ specifies the TIM interrupt source to disable. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) + +/** @brief Enable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to enable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) + +/** @brief Disable the specified DMA request. + * @param __HANDLE__ specifies the TIM Handle. + * @param __DMA__ specifies the TIM DMA request to disable. + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: Update DMA request + * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request + * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request + * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request + * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request + * @arg TIM_DMA_TRIGGER: Trigger DMA request + * @retval None + */ +#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) + +/** @brief Check whether the specified TIM interrupt flag is set or not. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to check. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified TIM interrupt flag. + * @param __HANDLE__ specifies the TIM Handle. + * @param __FLAG__ specifies the TIM interrupt flag to clear. + * This parameter can be one of the following values: + * @arg TIM_FLAG_UPDATE: Update interrupt flag + * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag + * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag + * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag + * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag + * @arg TIM_FLAG_COM: Commutation interrupt flag + * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag + * @arg TIM_FLAG_BREAK: Break interrupt flag + * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag + * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag + * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag + * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) + +/** + * @brief Check whether the specified TIM interrupt source is enabled or not. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the TIM interrupt source to check. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval The state of TIM_IT (SET or RESET). + */ +#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ + == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Clear the TIM interrupt pending bits. + * @param __HANDLE__ TIM handle + * @param __INTERRUPT__ specifies the interrupt pending bit to clear. + * This parameter can be one of the following values: + * @arg TIM_IT_UPDATE: Update interrupt + * @arg TIM_IT_CC1: Capture/Compare 1 interrupt + * @arg TIM_IT_CC2: Capture/Compare 2 interrupt + * @arg TIM_IT_CC3: Capture/Compare 3 interrupt + * @arg TIM_IT_CC4: Capture/Compare 4 interrupt + * @arg TIM_IT_COM: Commutation interrupt + * @arg TIM_IT_TRIGGER: Trigger interrupt + * @arg TIM_IT_BREAK: Break interrupt + * @retval None + */ +#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read + * in an atomic way. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 |= TIM_CR1_UIFREMAP)) + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @param __HANDLE__ TIM handle. + * @retval None +mode. + */ +#define __HAL_TIM_UIFREMAP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance->CR1 &= ~TIM_CR1_UIFREMAP)) + +/** + * @brief Get update interrupt flag (UIF) copy status. + * @param __COUNTER__ Counter value. + * @retval The state of UIFCPY (TRUE or FALSE). +mode. + */ +#define __HAL_TIM_GET_UIFCPY(__COUNTER__) (((__COUNTER__) & (TIM_CNT_UIFCPY)) == (TIM_CNT_UIFCPY)) + +/** + * @brief Indicates whether or not the TIM Counter is used as downcounter. + * @param __HANDLE__ TIM handle. + * @retval False (Counter used as upcounter) or True (Counter used as downcounter) + * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode + * or Encoder mode. + */ +#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) + +/** + * @brief Set the TIM Prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __PRESC__ specifies the Prescaler new value. + * @retval None + */ +#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) + +/** + * @brief Set the TIM Counter Register value on runtime. + * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in + * case of 32 bits counter TIM instance. + * Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros. + * @param __HANDLE__ TIM handle. + * @param __COUNTER__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) + +/** + * @brief Get the TIM Counter Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) + */ +#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) + +/** + * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __AUTORELOAD__ specifies the Counter register new value. + * @retval None + */ +#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ + do{ \ + (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ + (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ + } while(0) + +/** + * @brief Get the TIM Autoreload Register value on runtime. + * @param __HANDLE__ TIM handle. + * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) + */ +#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) + +/** + * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. + * @param __HANDLE__ TIM handle. + * @param __CKD__ specifies the clock division value. + * This parameter can be one of the following value: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + * @retval None + */ +#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ + do{ \ + (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ + (__HANDLE__)->Instance->CR1 |= (__CKD__); \ + (__HANDLE__)->Init.ClockDivision = (__CKD__); \ + } while(0) + +/** + * @brief Get the TIM Clock Division value on runtime. + * @param __HANDLE__ TIM handle. + * @retval The clock division can be one of the following values: + * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT + * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT + * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT + */ +#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) + +/** + * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() + * function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __ICPSC__ specifies the Input Capture4 prescaler new value. + * This parameter can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + * @retval None + */ +#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ + do{ \ + TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ + } while(0) + +/** + * @brief Get the TIM Input Capture prescaler on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get input capture 1 prescaler value + * @arg TIM_CHANNEL_2: get input capture 2 prescaler value + * @arg TIM_CHANNEL_3: get input capture 3 prescaler value + * @arg TIM_CHANNEL_4: get input capture 4 prescaler value + * @retval The input capture prescaler can be one of the following values: + * @arg TIM_ICPSC_DIV1: no prescaler + * @arg TIM_ICPSC_DIV2: capture is done once every 2 events + * @arg TIM_ICPSC_DIV4: capture is done once every 4 events + * @arg TIM_ICPSC_DIV8: capture is done once every 8 events + */ +#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ + (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) + +/** + * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __COMPARE__ specifies the Capture Compare register new value. + * @retval None + */ +#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ + ((__HANDLE__)->Instance->CCR4 = (__COMPARE__))) + +/** + * @brief Get the TIM Capture Compare Register value on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channel associated with the capture compare register + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: get capture/compare 1 register value + * @arg TIM_CHANNEL_2: get capture/compare 2 register value + * @arg TIM_CHANNEL_3: get capture/compare 3 register value + * @arg TIM_CHANNEL_4: get capture/compare 4 register value + * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) + */ +#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ + ((__HANDLE__)->Instance->CCR4)) + +/** + * @brief Set the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ + ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE)) + +/** + * @brief Reset the TIM Output compare preload. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE)) + +/** + * @brief Enable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @note When fast mode is enabled an active edge on the trigger input acts + * like a compare match on CCx output. Delay to sample the trigger + * input and to activate CCx output is reduced to 3 clock cycles. + * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. + * @retval None + */ +#define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ + ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE)) + +/** + * @brief Disable fast mode for a given channel. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @note When fast mode is disabled CCx output behaves normally depending + * on counter and CCRx values even when the trigger is ON. The minimum + * delay to activate CCx output when an active edge occurs on the + * trigger input is 5 clock cycles. + * @retval None + */ +#define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE)) + +/** + * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is set, only counter + * overflow/underflow generates an update interrupt or DMA request (if + * enabled) + * @retval None + */ +#define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) + +/** + * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. + * @param __HANDLE__ TIM handle. + * @note When the URS bit of the TIMx_CR1 register is reset, any of the + * following events generate an update interrupt or DMA request (if + * enabled): + * _ Counter overflow underflow + * _ Setting the UG bit + * _ Update generation through the slave mode controller + * @retval None + */ +#define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) + +/** + * @brief Set the TIM Capture x input polarity on runtime. + * @param __HANDLE__ TIM handle. + * @param __CHANNEL__ TIM Channels to be configured. + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param __POLARITY__ Polarity for TIx source + * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge + * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge + * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge + * @retval None + */ +#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + do{ \ + TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ + TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ + }while(0) + +/** @brief Select the Capture/compare DMA request source. + * @param __HANDLE__ specifies the TIM Handle. + * @param __CCDMA__ specifies Capture/compare DMA request source + * This parameter can be one of the following values: + * @arg TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event + * @arg TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event + * @retval None + */ +#define __HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) \ + MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__)) + +/** + * @} + */ +/* End of exported macros ----------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_Private_Constants TIM Private Constants + * @{ + */ +/* The counter of a timer instance is disabled only if all the CCx and CCxN + channels have been disabled */ +#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) +#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE)) +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_Private_Macros TIM Private Macros + * @{ + */ +#define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR) || \ + ((__MODE__) == TIM_CLEARINPUTSOURCE_OCREFCLR)) + +#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ + ((__BASE__) == TIM_DMABASE_CR2) || \ + ((__BASE__) == TIM_DMABASE_SMCR) || \ + ((__BASE__) == TIM_DMABASE_DIER) || \ + ((__BASE__) == TIM_DMABASE_SR) || \ + ((__BASE__) == TIM_DMABASE_EGR) || \ + ((__BASE__) == TIM_DMABASE_CCMR1) || \ + ((__BASE__) == TIM_DMABASE_CCMR2) || \ + ((__BASE__) == TIM_DMABASE_CCER) || \ + ((__BASE__) == TIM_DMABASE_CNT) || \ + ((__BASE__) == TIM_DMABASE_PSC) || \ + ((__BASE__) == TIM_DMABASE_ARR) || \ + ((__BASE__) == TIM_DMABASE_RCR) || \ + ((__BASE__) == TIM_DMABASE_CCR1) || \ + ((__BASE__) == TIM_DMABASE_CCR2) || \ + ((__BASE__) == TIM_DMABASE_CCR3) || \ + ((__BASE__) == TIM_DMABASE_CCR4) || \ + ((__BASE__) == TIM_DMABASE_BDTR) || \ + ((__BASE__) == TIM_DMABASE_OR) || \ + ((__BASE__) == TIM_DMABASE_AF1)) + +#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ + ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ + ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) + +#define IS_TIM_UIFREMAP_MODE(__MODE__) (((__MODE__) == TIM_UIFREMAP_DISABLE) || \ + ((__MODE__) == TIM_UIFREMAP_ENABLE)) + +#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ + ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) + +#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ + ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) + +#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ + ((__STATE__) == TIM_OCFAST_ENABLE)) + +#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCPOLARITY_LOW)) + +#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ + ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) + +#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCIDLESTATE_RESET)) + +#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ + ((__STATE__) == TIM_OCNIDLESTATE_RESET)) + +#define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) + +#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) + +#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ + ((__SELECTION__) == TIM_ICSELECTION_TRC)) + +#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ + ((__PRESCALER__) == TIM_ICPSC_DIV8)) + +#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ + ((__MODE__) == TIM_OPMODE_REPETITIVE)) + +#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ + ((__MODE__) == TIM_ENCODERMODE_TI2) || \ + ((__MODE__) == TIM_ENCODERMODE_TI12)) + +#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) + +#define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3) || \ + ((__CHANNEL__) == TIM_CHANNEL_4) || \ + ((__CHANNEL__) == TIM_CHANNEL_ALL)) + +#define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2)) + +#define IS_TIM_PERIOD(__PERIOD__) (((__PERIOD__) > 0U) && ((__PERIOD__) <= 0xFFFFU)) + +#define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ + ((__CHANNEL__) == TIM_CHANNEL_2) || \ + ((__CHANNEL__) == TIM_CHANNEL_3)) + +#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2)) + +#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ + ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) + +#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) + +#define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ + ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) + +#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) + +#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ + ((__STATE__) == TIM_OSSR_DISABLE)) + +#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ + ((__STATE__) == TIM_OSSI_DISABLE)) + +#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ + ((__LEVEL__) == TIM_LOCKLEVEL_3)) + + +#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ + ((__STATE__) == TIM_BREAK_DISABLE)) + +#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) + +#define IS_TIM_BREAK_AFMODE(__AFMODE__) (((__AFMODE__) == TIM_BREAK_AFMODE_INPUT) || \ + ((__AFMODE__) == TIM_BREAK_AFMODE_BIDIRECTIONAL)) + + +#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ + ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) + +#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ + ((__SOURCE__) == TIM_TRGO_ENABLE) || \ + ((__SOURCE__) == TIM_TRGO_UPDATE) || \ + ((__SOURCE__) == TIM_TRGO_OC1) || \ + ((__SOURCE__) == TIM_TRGO_OC1REF) || \ + ((__SOURCE__) == TIM_TRGO_OC2REF) || \ + ((__SOURCE__) == TIM_TRGO_OC3REF) || \ + ((__SOURCE__) == TIM_TRGO_OC4REF)) + +#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ + ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) + +#define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ + ((__MODE__) == TIM_SLAVEMODE_RESET) || \ + ((__MODE__) == TIM_SLAVEMODE_GATED) || \ + ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1) || \ + ((__MODE__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ + ((__MODE__) == TIM_OCMODE_PWM2) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM1) || \ + ((__MODE__) == TIM_OCMODE_COMBINED_PWM2) || \ + ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM1) || \ + ((__MODE__) == TIM_OCMODE_ASYMMETRIC_PWM2)) + +#define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ + ((__MODE__) == TIM_OCMODE_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_TOGGLE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ + ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \ + ((__MODE__) == TIM_OCMODE_RETRIGERRABLE_OPM2)) + +#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_TI1F_ED) || \ + ((__SELECTION__) == TIM_TS_TI1FP1) || \ + ((__SELECTION__) == TIM_TS_TI2FP2) || \ + ((__SELECTION__) == TIM_TS_ETRF)) + +#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ + ((__SELECTION__) == TIM_TS_NONE)) + +#define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ + ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) + +#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ + ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) + +#define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ + ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) + +#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ + ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) + +#define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) + +#define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) + +#define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) + +#define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) (((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) || \ + ((__TRIGGER__) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER)) + +#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ + ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) + +#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ + ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) + +#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ + ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) + +#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ + ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) + +#define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ + (__HANDLE__)->ChannelState[3]) + +#define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ + ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ + ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ + (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ + (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ + } while(0) + +#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ + (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ + HAL_TIM_CHANNEL_STATE_READY) + +#define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ + (((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__))) + +#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) \ + (((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__))) + +/** + * @} + */ +/* End of private macros -----------------------------------------------------*/ + +/* Include TIM HAL Extended module */ +#include "stm32wl3x_hal_tim_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * @{ + */ +/* Time Base functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * @{ + */ +/* Timer Output Compare functions *********************************************/ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * @{ + */ +/* Timer PWM functions ********************************************************/ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * @{ + */ +/* Timer Input Capture functions **********************************************/ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * @{ + */ +/* Timer One Pulse functions **************************************************/ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * @{ + */ +/* Timer Encoder functions ****************************************************/ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig); +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); +void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length); +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief IRQ handler management + * @{ + */ +/* Interrupt Handler functions ***********************************************/ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Control functions *********************************************************/ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel); +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel); +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig); +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength); +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * @{ + */ +/* Callback in non blocking modes (Interrupt and DMA) *************************/ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); +void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief Peripheral State functions + * @{ + */ +/* Peripheral State functions ************************************************/ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim); +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim); + +/* Peripheral Channel state functions ************************************************/ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim); +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/* Private functions----------------------------------------------------------*/ +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); +void TIM_DMAError(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +void TIM_ResetCallback(TIM_HandleTypeDef *htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ +/* End of private functions --------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_TIM_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_tim_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_tim_ex.h new file mode 100644 index 0000000000..d051c3a350 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_tim_ex.h @@ -0,0 +1,307 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_tim_ex.h + * @author MCD Application Team + * @brief Header file of TIM HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_TIM_EX_H +#define STM32WL3x_HAL_TIM_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup TIMEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types + * @{ + */ + + +/** + * @brief TIM Break/Break2 input configuration + */ +typedef struct +{ + uint32_t Source; /*!< Specifies the source of the timer break input. + This parameter can be a value of @ref TIMEx_Break_Input_Source */ + uint32_t Enable; /*!< Specifies whether or not the break input source is enabled. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */ + uint32_t Polarity; /*!< Specifies the break input source polarity. + This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */ +} TIMEx_BreakInputConfigTypeDef; + +/** + * @} + */ +/* End of exported types -----------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants + * @{ + */ + +/** @defgroup TIMEx_Remap TIM Extended Remapping + * @{ + */ +#define TIM_TIM2_ETR_GPIO 0x00000000U /*!< TIM2_ETR is not connected to GPIO */ +#define TIM_TIM2_ETR_ADC_AWD TIM2_OR_ETR_RMP /*!< TIM2_ETR is connected to ADC AWD */ +#define TIM_TIM2_ETR_COMP1 TIM_AF1_ETRSEL_0 /*!< TIM2_ETR is connected to COMP1 output */ +#define TIM_TIM2_TI4_GPIO 0x00000000U /*!< TIM2_TI4 is connected to GPIO */ +#define TIM_TIM2_TI4_COMP1 TIM2_OR_TI4_RMP /*!< TIM2_TI4 is connected to COMP1 output */ +#define TIM_TIM16_TI1_GPIO 0x00000000U /*!< TIM16_TI1 is connected to COMP1 output */ +#define TIM_TIM16_TI1_LCO TIM16_OR_TI1_RMP_0 /*!< TIM16_TI1 is connected to LCO */ +#define TIM_TIM16_TI1_COMP1 TIM16_OR_TI1_RMP_1 /*!< TIM16_TI1 is connected to COMP1 output */ +#define TIM_TIM16_TI1_MCO (TIM16_OR_TI1_RMP_1 | TIM16_OR_TI1_RMP_0) /*!< TIM16_TI1 is connected to MCO */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input TIM Extended Break input + * @{ + */ +#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source TIM Extended Break input source + * @{ + */ +#define TIM_BREAKINPUTSOURCE_BKIN 0x00000001U /*!< An external source (GPIO) is connected to the BKIN pin */ +#define TIM_BREAKINPUTSOURCE_COMP1 0x00000002U /*!< The COMP1 output is connected to the break input */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling + * @{ + */ +#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */ +#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */ +/** + * @} + */ + +/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity + * @{ + */ +#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */ +#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */ +/** + * @} + */ + +/** + * @} + */ +/* End of exported constants -------------------------------------------------*/ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros + * @{ + */ + +/** + * @} + */ +/* End of exported macro -----------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Macros TIM Extended Private Macros + * @{ + */ +#define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ + ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ETR_GPIO) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_ADC_AWD) || \ + ((TIM_REMAP) == TIM_TIM2_ETR_COMP1) || \ + ((TIM_REMAP) == TIM_TIM2_TI4_GPIO) || \ + ((TIM_REMAP) == TIM_TIM2_TI4_COMP1))) || \ + (((INSTANCE) == TIM16) && (((TIM_REMAP) == TIM_TIM16_TI1_GPIO) || \ + ((TIM_REMAP) == TIM_TIM16_TI1_LCO) || \ + ((TIM_REMAP) == TIM_TIM16_TI1_COMP1) || \ + ((TIM_REMAP) == TIM_TIM16_TI1_MCO)))) + +#define IS_TIM_BREAKINPUT(__BREAKINPUT__) \ + (((__BREAKINPUT__) == TIM_BREAKINPUT_BRK)) + +#define IS_TIM_BREAKINPUTSOURCE(__SOURCE__) (((__SOURCE__) == TIM_BREAKINPUTSOURCE_BKIN) || \ + ((__SOURCE__) == TIM_BREAKINPUTSOURCE_COMP1)) + +#define IS_TIM_BREAKINPUTSOURCE_STATE(__STATE__) \ + (((__STATE__) == TIM_BREAKINPUTSOURCE_DISABLE) || \ + ((__STATE__) == TIM_BREAKINPUTSOURCE_ENABLE)) + +#define IS_TIM_BREAKINPUTSOURCE_POLARITY(__POLARITY__) \ + (((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_LOW) || \ + ((__POLARITY__) == TIM_BREAKINPUTSOURCE_POLARITY_HIGH)) + +#define IS_TIM_CLOCKSOURCE_INSTANCE(INSTANCE, __CLOCK__) \ + ((((INSTANCE) == TIM2) && \ + (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI2))) \ + || \ + (((INSTANCE) == TIM16) && \ + (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ + ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0)))) + + +/** + * @} + */ +/* End of private macro ------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ + +/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * @{ + */ +/* Timer Complementary Output Compare functions *****************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * @{ + */ +/* Timer Complementary PWM functions ****************************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length); +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * @{ + */ +/* Timer Complementary One Pulse functions **********************************/ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); + +/* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * @{ + */ +/* Extended Control functions ************************************************/ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource); +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig); +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); + +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput); +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(const TIM_HandleTypeDef *htim, uint32_t BreakInput); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * @{ + */ +/* Extended Callback **********************************************************/ +void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); +void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); +/** + * @} + */ + +/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * @{ + */ +/* Extended Peripheral State functions ***************************************/ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN); +/** + * @} + */ + +/** + * @} + */ +/* End of exported functions -------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* STM32WL3x_HAL_TIM_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_uart.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_uart.h new file mode 100644 index 0000000000..4964103906 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_uart.h @@ -0,0 +1,1760 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_uart.h + * @author MCD Application Team + * @brief Header file of UART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_UART_H +#define STM32WL3x_HAL_UART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup UART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UART_Exported_Types UART Exported Types + * @{ + */ + +/** + * @brief UART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the UART communication baud rate. + The baud rate register is computed using the following formula: + @note For LPUART : + Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate))) + where lpuart_ker_ck_pres is the UART input clock divided by a prescaler. + @note For UART : + - If oversampling is 16 or in LIN mode, + Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate))) + - If oversampling is 8, + Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where uart_ker_ck_pres is the UART input clock divided by a prescaler */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref UARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref UART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref UART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref UART_Mode. */ + + uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref UART_Hardware_Flow_Control. */ + + uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, + to achieve higher speed (up to f_PCLK/8). + This parameter can be a value of @ref UART_Over_Sampling. */ + + uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. + Selecting the single sample method increases the receiver tolerance to clock + deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source. + This parameter can be a value of @ref UART_ClockPrescaler. */ + +} UART_InitTypeDef; + +/** + * @brief UART Advanced Features initialization structure definition + */ +typedef struct +{ + uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several + Advanced Features may be initialized at the same time . + This parameter can be a value of + @ref UART_Advanced_Features_Initialization_Type. */ + + uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. + This parameter can be a value of @ref UART_Tx_Inv. */ + + uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. + This parameter can be a value of @ref UART_Rx_Inv. */ + + uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic + vs negative/inverted logic). + This parameter can be a value of @ref UART_Data_Inv. */ + + uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. + This parameter can be a value of @ref UART_Rx_Tx_Swap. */ + + uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. + This parameter can be a value of @ref UART_Overrun_Disable. */ + +#if defined(HAL_DMA_MODULE_ENABLED) + uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. + This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error. */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. + This parameter can be a value of @ref UART_AutoBaudRate_Enable. */ + + uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate + detection is carried out. + This parameter can be a value of @ref UART_AutoBaud_Rate_Mode. */ + + uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. + This parameter can be a value of @ref UART_MSB_First. */ +} UART_AdvFeatureInitTypeDef; + +/** + * @brief HAL UART State definition + * @note HAL UART State value is a combination of 2 different substates: + * gState and RxState (see @ref UART_State_Definition). + * - gState contains UART state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized. HAL UART Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (Peripheral busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 Peripheral initialization status + * 0 : Reset (Peripheral not initialized) + * 1 : Init done (Peripheral initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef uint32_t HAL_UART_StateTypeDef; + +/** + * @brief HAL UART Reception type definition + * @note HAL UART Reception type value aims to identify which type of Reception is ongoing. + * This parameter can be a value of @ref UART_Reception_Type_Values : + * HAL_UART_RECEPTION_STANDARD = 0x00U, + * HAL_UART_RECEPTION_TOIDLE = 0x01U, + * HAL_UART_RECEPTION_TORTO = 0x02U, + * HAL_UART_RECEPTION_TOCHARMATCH = 0x03U, + */ +typedef uint32_t HAL_UART_RxTypeTypeDef; + +/** + * @brief HAL UART Rx Event type definition + * @note HAL UART Rx Event type value aims to identify which type of Event has occurred + * leading to call of the RxEvent callback. + * This parameter can be a value of @ref UART_RxEvent_Type_Values : + * HAL_UART_RXEVENT_TC = 0x00U, + * HAL_UART_RXEVENT_HT = 0x01U, + * HAL_UART_RXEVENT_IDLE = 0x02U, + */ +typedef uint32_t HAL_UART_RxEventTypeTypeDef; + +/** + * @brief UART handle Structure definition + */ +typedef struct __UART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< UART registers base address */ + + UART_InitTypeDef Init; /*!< UART communication parameters */ + + UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< UART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< UART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ + + uint16_t Mask; /*!< UART Rx RDR register mask */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode is being used. + This parameter can be a value of @ref UARTEx_FIFO_mode. */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */ + + __IO HAL_UART_RxEventTypeTypeDef RxEventType; /*!< Type of Rx Event */ + + void (*RxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __UART_HandleTypeDef *huart); /*!< Function pointer on Tx IRQ handler */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_UART_StateTypeDef gState; /*!< UART state information related to global Handle management + and also related to Tx operations. This parameter + can be a value of @ref HAL_UART_StateTypeDef */ + + __IO HAL_UART_StateTypeDef RxState; /*!< UART state information related to Rx operations. This + parameter can be a value of @ref HAL_UART_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< UART Error code */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Complete Callback */ + void (* ErrorCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Error Callback */ + void (* AbortCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Complete Callback */ + void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */ + void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */ + void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */ + void (* RxFifoFullCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Tx Fifo Empty Callback */ + void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */ + + void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */ + void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +} UART_HandleTypeDef; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL UART Callback ID enumeration definition + */ +typedef enum +{ + HAL_UART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< UART Tx Half Complete Callback ID */ + HAL_UART_TX_COMPLETE_CB_ID = 0x01U, /*!< UART Tx Complete Callback ID */ + HAL_UART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< UART Rx Half Complete Callback ID */ + HAL_UART_RX_COMPLETE_CB_ID = 0x03U, /*!< UART Rx Complete Callback ID */ + HAL_UART_ERROR_CB_ID = 0x04U, /*!< UART Error Callback ID */ + HAL_UART_ABORT_COMPLETE_CB_ID = 0x05U, /*!< UART Abort Complete Callback ID */ + HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< UART Abort Transmit Complete Callback ID */ + HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< UART Abort Receive Complete Callback ID */ + HAL_UART_WAKEUP_CB_ID = 0x08U, /*!< UART Wakeup Callback ID */ + HAL_UART_RX_FIFO_FULL_CB_ID = 0x09U, /*!< UART Rx Fifo Full Callback ID */ + HAL_UART_TX_FIFO_EMPTY_CB_ID = 0x0AU, /*!< UART Tx Fifo Empty Callback ID */ + + HAL_UART_MSPINIT_CB_ID = 0x0BU, /*!< UART MspInit callback ID */ + HAL_UART_MSPDEINIT_CB_ID = 0x0CU /*!< UART MspDeInit callback ID */ + +} HAL_UART_CallbackIDTypeDef; + +/** + * @brief HAL UART Callback pointer definition + */ +typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */ +typedef void (*pUART_RxEventCallbackTypeDef) +(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */ + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UART_Exported_Constants UART Exported Constants + * @{ + */ + +/** @defgroup UART_State_Definition UART State Code Definition + * @{ + */ +#define HAL_UART_STATE_RESET 0x00000000U /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ +#define HAL_UART_STATE_BUSY 0x00000024U /*!< an internal process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing + Value is allowed for gState only */ +#define HAL_UART_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing + Value is allowed for RxState only */ +#define HAL_UART_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState.Value is result + of combination (Or) between gState and RxState values */ +#define HAL_UART_STATE_TIMEOUT 0x000000A0U /*!< Timeout state + Value is allowed for gState only */ +#define HAL_UART_STATE_ERROR 0x000000E0U /*!< Error + Value is allowed for gState only */ +/** + * @} + */ + +/** @defgroup UART_Error_Definition UART Error Definition + * @{ + */ +#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#endif /* HAL_DMA_MODULE_ENABLED */ +#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup UART_Stop_Bits UART Number of Stop Bits + * @{ + */ +#define UART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< UART frame with 0.5 stop bit */ +#define UART_STOPBITS_1 0x00000000U /*!< UART frame with 1 stop bit */ +#define UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< UART frame with 1.5 stop bits */ +#define UART_STOPBITS_2 USART_CR2_STOP_1 /*!< UART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup UART_Parity UART Parity + * @{ + */ +#define UART_PARITY_NONE 0x00000000U /*!< No parity */ +#define UART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control + * @{ + */ +#define UART_HWCONTROL_NONE 0x00000000U /*!< No hardware control */ +#define UART_HWCONTROL_RTS USART_CR3_RTSE /*!< Request To Send */ +#define UART_HWCONTROL_CTS USART_CR3_CTSE /*!< Clear To Send */ +#define UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< Request and Clear To Send */ +/** + * @} + */ + +/** @defgroup UART_Mode UART Transfer Mode + * @{ + */ +#define UART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define UART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup UART_State UART State + * @{ + */ +#define UART_STATE_DISABLE 0x00000000U /*!< UART disabled */ +#define UART_STATE_ENABLE USART_CR1_UE /*!< UART enabled */ +/** + * @} + */ + +/** @defgroup UART_Over_Sampling UART Over Sampling + * @{ + */ +#define UART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define UART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method + * @{ + */ +#define UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U /*!< One-bit sampling disable */ +#define UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT /*!< One-bit sampling enable */ +/** + * @} + */ + +/** @defgroup UART_ClockPrescaler UART Clock Prescaler + * @{ + */ +#define UART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define UART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define UART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define UART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define UART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define UART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define UART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define UART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define UART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define UART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define UART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define UART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ +/** + * @} + */ + +/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U /*!< Auto Baud rate detection + on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 /*!< Auto Baud rate detection + on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 /*!< Auto Baud rate detection + on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE /*!< Auto Baud rate detection + on 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup UART_Receiver_Timeout UART Receiver Timeout + * @{ + */ +#define UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U /*!< UART Receiver Timeout disable */ +#define UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN /*!< UART Receiver Timeout enable */ +/** + * @} + */ + +/** @defgroup UART_LIN UART Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE 0x00000000U /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE USART_CR2_LINEN /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B 0x00000000U /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL /*!< LIN 11-bit break detection length */ +/** + * @} + */ + +#if defined(HAL_DMA_MODULE_ENABLED) +/** @defgroup UART_DMA_Tx UART DMA Tx + * @{ + */ +#define UART_DMA_TX_DISABLE 0x00000000U /*!< UART DMA TX disabled */ +#define UART_DMA_TX_ENABLE USART_CR3_DMAT /*!< UART DMA TX enabled */ +/** + * @} + */ + +/** @defgroup UART_DMA_Rx UART DMA Rx + * @{ + */ +#define UART_DMA_RX_DISABLE 0x00000000U /*!< UART DMA RX disabled */ +#define UART_DMA_RX_ENABLE USART_CR3_DMAR /*!< UART DMA RX enabled */ +/** + * @} + */ +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection + * @{ + */ +#define UART_HALF_DUPLEX_DISABLE 0x00000000U /*!< UART half-duplex disabled */ +#define UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL /*!< UART half-duplex enabled */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_Methods UART WakeUp Methods + * @{ + */ +#define UART_WAKEUPMETHOD_IDLELINE 0x00000000U /*!< UART wake-up on idle line */ +#define UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE /*!< UART wake-up on address mark */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UART Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST USART_RQR_SBKRQ /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST USART_RQR_MMRQ /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type + * @{ + */ +#define UART_ADVFEATURE_NO_INIT 0x00000000U /*!< No advanced feature initialization */ +#define UART_ADVFEATURE_TXINVERT_INIT 0x00000001U /*!< TX pin active level inversion */ +#define UART_ADVFEATURE_RXINVERT_INIT 0x00000002U /*!< RX pin active level inversion */ +#define UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U /*!< Binary data inversion */ +#define UART_ADVFEATURE_SWAP_INIT 0x00000008U /*!< TX/RX pins swap */ +#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U /*!< RX overrun disable */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U /*!< DMA disable on Reception Error */ +#endif /* HAL_DMA_MODULE_ENABLED */ +#define UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U /*!< Auto Baud rate detection initialization */ +#define UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U /*!< Most significant bit sent/received first */ +/** + * @} + */ + +/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_TXINV_DISABLE 0x00000000U /*!< TX pin active level inversion disable */ +#define UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV /*!< TX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion + * @{ + */ +#define UART_ADVFEATURE_RXINV_DISABLE 0x00000000U /*!< RX pin active level inversion disable */ +#define UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV /*!< RX pin active level inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion + * @{ + */ +#define UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U /*!< Binary data inversion disable */ +#define UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV /*!< Binary data inversion enable */ +/** + * @} + */ + +/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap + * @{ + */ +#define UART_ADVFEATURE_SWAP_DISABLE 0x00000000U /*!< TX/RX pins swap disable */ +#define UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP /*!< TX/RX pins swap enable */ +/** + * @} + */ + +/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable + * @{ + */ +#define UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U /*!< RX overrun enable */ +#define UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS /*!< RX overrun disable */ +/** + * @} + */ + +/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable + * @{ + */ +#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U /*!< RX Auto Baud rate detection enable */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN /*!< RX Auto Baud rate detection disable */ +/** + * @} + */ + +#if defined(HAL_DMA_MODULE_ENABLED) +/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error + * @{ + */ +#define UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U /*!< DMA enable on Reception Error */ +#define UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE /*!< DMA disable on Reception Error */ +/** + * @} + */ +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** @defgroup UART_MSB_First UART Advanced Feature MSB First + * @{ + */ +#define UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U /*!< Most significant bit sent/received + first disable */ +#define UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST /*!< Most significant bit sent/received + first enable */ +/** + * @} + */ + +/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM /*!< UART stop mode enable */ +/** + * @} + */ + +/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable + * @{ + */ +#define UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U /*!< UART mute mode disable */ +#define UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME /*!< UART mute mode enable */ +/** + * @} + */ + +/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register + * @{ + */ +#define UART_CR2_ADDRESS_LSB_POS 24U /*!< UART address-matching LSB position in CR2 register */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS 0x00000000U /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS /*!< UART wake-up on receive data register + not empty or RXFIFO is not empty */ +/** + * @} + */ + +/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity + * @{ + */ +#define UART_DE_POLARITY_HIGH 0x00000000U /*!< Driver enable signal is active high */ +#define UART_DE_POLARITY_LOW USART_CR3_DEP /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEAT_ADDRESS_LSB_POS 21U /*!< UART Driver Enable assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register + * @{ + */ +#define UART_CR1_DEDT_ADDRESS_LSB_POS 16U /*!< UART Driver Enable de-assertion time LSB + position in CR1 register */ +/** + * @} + */ + +/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask + * @{ + */ +#define UART_IT_MASK 0x001FU /*!< UART interruptions flags mask */ +/** + * @} + */ + +/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value + * @{ + */ +#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU /*!< UART polling-based communications time-out value */ +/** + * @} + */ + +/** @defgroup UART_Flags UART Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define UART_FLAG_TXFT USART_ISR_TXFT /*!< UART TXFIFO threshold flag */ +#define UART_FLAG_RXFT USART_ISR_RXFT /*!< UART RXFIFO threshold flag */ +#define UART_FLAG_RXFF USART_ISR_RXFF /*!< UART RXFIFO Full flag */ +#define UART_FLAG_TXFE USART_ISR_TXFE /*!< UART TXFIFO Empty flag */ +#define UART_FLAG_REACK USART_ISR_REACK /*!< UART receive enable acknowledge flag */ +#define UART_FLAG_TEACK USART_ISR_TEACK /*!< UART transmit enable acknowledge flag */ +#define UART_FLAG_WUF USART_ISR_WUF /*!< UART wake-up from stop mode flag */ +#define UART_FLAG_RWU USART_ISR_RWU /*!< UART receiver wake-up from mute mode flag */ +#define UART_FLAG_SBKF USART_ISR_SBKF /*!< UART send break flag */ +#define UART_FLAG_CMF USART_ISR_CMF /*!< UART character match flag */ +#define UART_FLAG_BUSY USART_ISR_BUSY /*!< UART busy flag */ +#define UART_FLAG_ABRF USART_ISR_ABRF /*!< UART auto Baud rate flag */ +#define UART_FLAG_ABRE USART_ISR_ABRE /*!< UART auto Baud rate error */ +#define UART_FLAG_RTOF USART_ISR_RTOF /*!< UART receiver timeout flag */ +#define UART_FLAG_CTS USART_ISR_CTS /*!< UART clear to send flag */ +#define UART_FLAG_CTSIF USART_ISR_CTSIF /*!< UART clear to send interrupt flag */ +#define UART_FLAG_LBDF USART_ISR_LBDF /*!< UART LIN break detection flag */ +#define UART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< UART transmit data register empty */ +#define UART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< UART TXFIFO not full */ +#define UART_FLAG_TC USART_ISR_TC /*!< UART transmission complete */ +#define UART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< UART read data register not empty */ +#define UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< UART RXFIFO not empty */ +#define UART_FLAG_IDLE USART_ISR_IDLE /*!< UART idle flag */ +#define UART_FLAG_ORE USART_ISR_ORE /*!< UART overrun error */ +#define UART_FLAG_NE USART_ISR_NE /*!< UART noise error */ +#define UART_FLAG_FE USART_ISR_FE /*!< UART frame error */ +#define UART_FLAG_PE USART_ISR_PE /*!< UART parity error */ +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UART Interrupts Definition + * Elements values convention: 000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define UART_IT_PE 0x0028U /*!< UART parity error interruption */ +#define UART_IT_TXE 0x0727U /*!< UART transmit data register empty interruption */ +#define UART_IT_TXFNF 0x0727U /*!< UART TX FIFO not full interruption */ +#define UART_IT_TC 0x0626U /*!< UART transmission complete interruption */ +#define UART_IT_RXNE 0x0525U /*!< UART read data register not empty interruption */ +#define UART_IT_RXFNE 0x0525U /*!< UART RXFIFO not empty interruption */ +#define UART_IT_IDLE 0x0424U /*!< UART idle interruption */ +#define UART_IT_LBD 0x0846U /*!< UART LIN break detection interruption */ +#define UART_IT_CTS 0x096AU /*!< UART CTS interruption */ +#define UART_IT_CM 0x112EU /*!< UART character match interruption */ +#define UART_IT_WUF 0x1476U /*!< UART wake-up from stop mode interruption */ +#define UART_IT_RXFF 0x183FU /*!< UART RXFIFO full interruption */ +#define UART_IT_TXFE 0x173EU /*!< UART TXFIFO empty interruption */ +#define UART_IT_RXFT 0x1A7CU /*!< UART RXFIFO threshold reached interruption */ +#define UART_IT_TXFT 0x1B77U /*!< UART TXFIFO threshold reached interruption */ +#define UART_IT_RTO 0x0B3AU /*!< UART receiver timeout interruption */ + +#define UART_IT_ERR 0x0060U /*!< UART error interruption */ + +#define UART_IT_ORE 0x0300U /*!< UART overrun error interruption */ +#define UART_IT_NE 0x0200U /*!< UART noise error interruption */ +#define UART_IT_FE 0x0100U /*!< UART frame error interruption */ +/** + * @} + */ + +/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define UART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO empty clear flag */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< UART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup UART_Reception_Type_Values UART Reception type values + * @{ + */ +#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */ +#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */ +#define HAL_UART_RECEPTION_TORTO (0x00000002U) /*!< Reception till completion or RTO event */ +#define HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) /*!< Reception till completion or CM event */ +/** + * @} + */ + +/** @defgroup UART_RxEvent_Type_Values UART RxEvent type values + * @{ + */ +#define HAL_UART_RXEVENT_TC (0x00000000U) /*!< RxEvent linked to Transfer Complete event */ +#define HAL_UART_RXEVENT_HT (0x00000001U) /*!< RxEvent linked to Half Transfer event */ +#define HAL_UART_RXEVENT_IDLE (0x00000002U) /*!< RxEvent linked to IDLE event */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup UART_Exported_Macros UART Exported Macros + * @{ + */ + +/** @brief Reset UART handle states. + * @param __HANDLE__ UART handle. + * @retval None + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_UART_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_UART_STATE_RESET; \ + } while(0U) +#endif /*USE_HAL_UART_REGISTER_CALLBACKS */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0U) + +/** @brief Clear the specified UART pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the UART PE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) + +/** @brief Clear the UART FE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) + +/** @brief Clear the UART NE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) + +/** @brief Clear the UART ORE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) + +/** @brief Clear the UART IDLE pending flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) + +/** @brief Clear the UART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) + +/** @brief Check whether the specified UART flag is set or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref UART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref UART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref UART_FLAG_RXFF RXFIFO Full flag + * @arg @ref UART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref UART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref UART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref UART_FLAG_WUF Wake up from stop mode flag + * @arg @ref UART_FLAG_RWU Receiver wake up flag (if the UART in mute mode) + * @arg @ref UART_FLAG_SBKF Send Break flag + * @arg @ref UART_FLAG_CMF Character match flag + * @arg @ref UART_FLAG_BUSY Busy flag + * @arg @ref UART_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref UART_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref UART_FLAG_CTS CTS Change flag + * @arg @ref UART_FLAG_LBDF LIN Break detection flag + * @arg @ref UART_FLAG_TXE Transmit data register empty flag + * @arg @ref UART_FLAG_TXFNF UART TXFIFO not full flag + * @arg @ref UART_FLAG_TC Transmission Complete flag + * @arg @ref UART_FLAG_RXNE Receive data register not empty flag + * @arg @ref UART_FLAG_RXFNE UART RXFIFO not empty flag + * @arg @ref UART_FLAG_RTOF Receiver Timeout flag + * @arg @ref UART_FLAG_IDLE Idle Line detection flag + * @arg @ref UART_FLAG_ORE Overrun Error flag + * @arg @ref UART_FLAG_NE Noise Error flag + * @arg @ref UART_FLAG_FE Framing Error flag + * @arg @ref UART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Disable the specified UART interrupt. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (\ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\ + ((__INTERRUPT__) & UART_IT_MASK)))) + +/** @brief Check whether the specified UART interrupt has occurred or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (1U << ((__INTERRUPT__)>> 8U))) != RESET) ? SET : RESET) + +/** @brief Check whether the specified UART interrupt source is enabled or not. + * @param __HANDLE__ specifies the UART Handle. + * @param __INTERRUPT__ specifies the UART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref UART_IT_RXFF RXFIFO Full interrupt + * @arg @ref UART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref UART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref UART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref UART_IT_WUF Wakeup from stop mode interrupt + * @arg @ref UART_IT_CM Character match interrupt + * @arg @ref UART_IT_CTS CTS change interrupt + * @arg @ref UART_IT_LBD LIN Break detection interrupt + * @arg @ref UART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref UART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref UART_IT_TC Transmission complete interrupt + * @arg @ref UART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref UART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref UART_IT_RTO Receive Timeout interrupt + * @arg @ref UART_IT_IDLE Idle line detection interrupt + * @arg @ref UART_IT_PE Parity Error interrupt + * @arg @ref UART_IT_ERR Error interrupt (Frame error, noise error, overrun error) + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (1U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + UART_IT_MASK))) != RESET) ? SET : RESET) + +/** @brief Clear the specified UART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref UART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref UART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref UART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref UART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref UART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref UART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref UART_CLEAR_TXFECF TXFIFO empty Clear Flag + * @arg @ref UART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref UART_CLEAR_LBDF LIN Break Detection Clear Flag + * @arg @ref UART_CLEAR_CTSF CTS Interrupt Clear Flag + * @arg @ref UART_CLEAR_CMF Character Match Clear Flag + * @arg @ref UART_CLEAR_WUF Wake Up from stop mode Clear Flag + * @retval None + */ +#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific UART request flag. + * @param __HANDLE__ specifies the UART Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref UART_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref UART_SENDBREAK_REQUEST Send Break Request + * @arg @ref UART_MUTE_MODE_REQUEST Mute Mode Request + * @arg @ref UART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref UART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * @retval None + */ +#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the UART one bit sample method. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** @brief Enable CTS flow control. + * @note This macro allows to enable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ + } while(0U) + +/** @brief Disable CTS flow control. + * @note This macro allows to disable CTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ + } while(0U) + +/** @brief Enable RTS flow control. + * @note This macro allows to enable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ + do{ \ + ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ + (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ + } while(0U) + +/** @brief Disable RTS flow control. + * @note This macro allows to disable RTS hardware flow control for a given UART instance, + * without need to call HAL_UART_Init() function. + * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. + * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need + * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : + * - UART instance should have already been initialised (through call of HAL_UART_Init() ) + * - macro could only be called when corresponding UART instance is disabled + * (i.e. __HAL_UART_DISABLE(__HANDLE__)) and should be followed by an Enable + * macro (i.e. __HAL_UART_ENABLE(__HANDLE__)). + * @param __HANDLE__ specifies the UART Handle. + * @retval None + */ +#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ + do{ \ + ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ + (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ + } while(0U) +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup UART_Private_Macros UART Private Macros + * @{ + */ +/** @brief Get UART clock division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval UART clock division factor + */ +#define UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) ? 128U : 256U) + +/** @brief BRR division operation to set BRR register with LPUART. + * @param __PCLK__ LPUART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((uint32_t)((((((uint64_t)(__PCLK__))/(UARTPrescTable[(__CLOCKPRESCALER__)]))*256U)+ \ + (uint32_t)((__BAUD__)/2U)) / (__BAUD__)) \ + ) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ UART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ UART prescaler value. + * @retval Division result + */ +#define UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) \ + ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) + +/** @brief Check whether or not UART instance is Low Power UART. + * @param __HANDLE__ specifies the UART Handle. + * @retval SET (instance is LPUART) or RESET (instance isn't LPUART) + */ +#define UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) + +/** @brief Check UART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on WL3 (i.e. 16 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) + */ +#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 2000001U) + +/** @brief Check UART assertion time. + * @param __TIME__ 5-bit value assertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** @brief Check UART deassertion time. + * @param __TIME__ 5-bit value deassertion time. + * @retval Test result (TRUE or FALSE). + */ +#define IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) + +/** + * @brief Ensure that UART frame number of stop bits is valid. + * @param __STOPBITS__ UART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_UART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_0_5) || \ + ((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_1_5) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that LPUART frame number of stop bits is valid. + * @param __STOPBITS__ LPUART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_LPUART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == UART_STOPBITS_1) || \ + ((__STOPBITS__) == UART_STOPBITS_2)) + +/** + * @brief Ensure that UART frame parity is valid. + * @param __PARITY__ UART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_UART_PARITY(__PARITY__) (((__PARITY__) == UART_PARITY_NONE) || \ + ((__PARITY__) == UART_PARITY_EVEN) || \ + ((__PARITY__) == UART_PARITY_ODD)) + +/** + * @brief Ensure that UART hardware flow control is valid. + * @param __CONTROL__ UART hardware flow control. + * @retval SET (__CONTROL__ is valid) or RESET (__CONTROL__ is invalid) + */ +#define IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__)\ + (((__CONTROL__) == UART_HWCONTROL_NONE) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS) || \ + ((__CONTROL__) == UART_HWCONTROL_CTS) || \ + ((__CONTROL__) == UART_HWCONTROL_RTS_CTS)) + +/** + * @brief Ensure that UART communication mode is valid. + * @param __MODE__ UART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that UART state is valid. + * @param __STATE__ UART state. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_UART_STATE(__STATE__) (((__STATE__) == UART_STATE_DISABLE) || \ + ((__STATE__) == UART_STATE_ENABLE)) + +/** + * @brief Ensure that UART oversampling is valid. + * @param __SAMPLING__ UART oversampling. + * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid) + */ +#define IS_UART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == UART_OVERSAMPLING_16) || \ + ((__SAMPLING__) == UART_OVERSAMPLING_8)) + +/** + * @brief Ensure that UART frame sampling is valid. + * @param __ONEBIT__ UART frame sampling. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == UART_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == UART_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__ UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) + +/** + * @brief Ensure that UART receiver timeout setting is valid. + * @param __TIMEOUT__ UART receiver timeout setting. + * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) + */ +#define IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_DISABLE) || \ + ((__TIMEOUT__) == UART_RECEIVER_TIMEOUT_ENABLE)) + +/** @brief Check the receiver timeout value. + * @note The maximum UART receiver timeout value is 0xFFFFFF. + * @param __TIMEOUTVALUE__ receiver timeout value. + * @retval Test result (TRUE or FALSE) + */ +#define IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) + +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__ UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__ UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Ensure that UART DMA TX state is valid. + * @param __DMATX__ UART DMA TX state. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_UART_DMA_TX(__DMATX__) (((__DMATX__) == UART_DMA_TX_DISABLE) || \ + ((__DMATX__) == UART_DMA_TX_ENABLE)) + +/** + * @brief Ensure that UART DMA RX state is valid. + * @param __DMARX__ UART DMA RX state. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_UART_DMA_RX(__DMARX__) (((__DMARX__) == UART_DMA_RX_DISABLE) || \ + ((__DMARX__) == UART_DMA_RX_ENABLE)) + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @brief Ensure that UART half-duplex state is valid. + * @param __HDSEL__ UART half-duplex state. + * @retval SET (__HDSEL__ is valid) or RESET (__HDSEL__ is invalid) + */ +#define IS_UART_HALF_DUPLEX(__HDSEL__) (((__HDSEL__) == UART_HALF_DUPLEX_DISABLE) || \ + ((__HDSEL__) == UART_HALF_DUPLEX_ENABLE)) + +/** + * @brief Ensure that UART wake-up method is valid. + * @param __WAKEUP__ UART wake-up method . + * @retval SET (__WAKEUP__ is valid) or RESET (__WAKEUP__ is invalid) + */ +#define IS_UART_WAKEUPMETHOD(__WAKEUP__) (((__WAKEUP__) == UART_WAKEUPMETHOD_IDLELINE) || \ + ((__WAKEUP__) == UART_WAKEUPMETHOD_ADDRESSMARK)) + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__ UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that UART advanced features initialization is valid. + * @param __INIT__ UART advanced features initialization. + * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) + */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) +#else +#define IS_UART_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (UART_ADVFEATURE_NO_INIT | \ + UART_ADVFEATURE_TXINVERT_INIT | \ + UART_ADVFEATURE_RXINVERT_INIT | \ + UART_ADVFEATURE_DATAINVERT_INIT | \ + UART_ADVFEATURE_SWAP_INIT | \ + UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ + UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ + UART_ADVFEATURE_MSBFIRST_INIT)) +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Ensure that UART frame TX inversion setting is valid. + * @param __TXINV__ UART frame TX inversion setting. + * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == UART_ADVFEATURE_TXINV_DISABLE) || \ + ((__TXINV__) == UART_ADVFEATURE_TXINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX inversion setting is valid. + * @param __RXINV__ UART frame RX inversion setting. + * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == UART_ADVFEATURE_RXINV_DISABLE) || \ + ((__RXINV__) == UART_ADVFEATURE_RXINV_ENABLE)) + +/** + * @brief Ensure that UART frame data inversion setting is valid. + * @param __DATAINV__ UART frame data inversion setting. + * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) + */ +#define IS_UART_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == UART_ADVFEATURE_DATAINV_DISABLE) || \ + ((__DATAINV__) == UART_ADVFEATURE_DATAINV_ENABLE)) + +/** + * @brief Ensure that UART frame RX/TX pins swap setting is valid. + * @param __SWAP__ UART frame RX/TX pins swap setting. + * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) + */ +#define IS_UART_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == UART_ADVFEATURE_SWAP_DISABLE) || \ + ((__SWAP__) == UART_ADVFEATURE_SWAP_ENABLE)) + +/** + * @brief Ensure that UART frame overrun setting is valid. + * @param __OVERRUN__ UART frame overrun setting. + * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) + */ +#define IS_UART_OVERRUN(__OVERRUN__) (((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ + ((__OVERRUN__) == UART_ADVFEATURE_OVERRUN_DISABLE)) + +/** + * @brief Ensure that UART auto Baud rate state is valid. + * @param __AUTOBAUDRATE__ UART auto Baud rate state. + * @retval SET (__AUTOBAUDRATE__ is valid) or RESET (__AUTOBAUDRATE__ is invalid) + */ +#define IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) (((__AUTOBAUDRATE__) == \ + UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ + ((__AUTOBAUDRATE__) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Ensure that UART DMA enabling or disabling on error setting is valid. + * @param __DMA__ UART DMA enabling or disabling on error setting. + * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) + */ +#define IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ + ((__DMA__) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Ensure that UART frame MSB first setting is valid. + * @param __MSBFIRST__ UART frame MSB first setting. + * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) + */ +#define IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ + ((__MSBFIRST__) == UART_ADVFEATURE_MSBFIRST_ENABLE)) + +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__ UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART mute mode state is valid. + * @param __MUTE__ UART mute mode state. + * @retval SET (__MUTE__ is valid) or RESET (__MUTE__ is invalid) + */ +#define IS_UART_MUTE_MODE(__MUTE__) (((__MUTE__) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ + ((__MUTE__) == UART_ADVFEATURE_MUTEMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__ UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) + +/** + * @brief Ensure that UART driver enable polarity is valid. + * @param __POLARITY__ UART driver enable polarity. + * @retval SET (__POLARITY__ is valid) or RESET (__POLARITY__ is invalid) + */ +#define IS_UART_DE_POLARITY(__POLARITY__) (((__POLARITY__) == UART_DE_POLARITY_HIGH) || \ + ((__POLARITY__) == UART_DE_POLARITY_LOW)) + +/** + * @brief Ensure that UART Prescaler is valid. + * @param __CLOCKPRESCALER__ UART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_UART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == UART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == UART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include UART HAL Extended module */ +#include "stm32wl3x_hal_uart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart); +void HAL_UART_MspInit(UART_HandleTypeDef *huart); +void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID); + +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); +#endif /* HAL_DMA_MODULE_ENABLED */ +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart); + +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); +void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart); +void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions ************************************************/ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue); +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Errors functions **************************************************/ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart); +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions -----------------------------------------------------------*/ +/** @addtogroup UART_Private_Functions UART Private Functions + * @{ + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @} + */ + +/* Private variables -----------------------------------------------------------*/ +/** @defgroup UART_Private_variables UART Private variables + * @{ + */ +/* Prescaler Table used in BRR computation macros. + Declared as extern here to allow use of private UART macros, outside of HAL UART functions */ +extern const uint16_t UARTPrescTable[12]; +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_UART_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_uart_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_uart_ex.h new file mode 100644 index 0000000000..e91c90479d --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_uart_ex.h @@ -0,0 +1,313 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_uart_ex.h + * @author MCD Application Team + * @brief Header file of UART HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_UART_EX_H +#define STM32WL3x_HAL_UART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activate the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UARTEx_WakeUp_Address_Length. */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max). */ +} UART_WakeUpTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#define UART_WORDLENGTH_7B USART_CR1_M1 /*!< 7-bit long UART frame */ +#define UART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long UART frame */ +#define UART_WORDLENGTH_9B USART_CR1_M0 /*!< 9-bit long UART frame */ +/** + * @} + */ + +/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length + * @{ + */ +#define UART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit long wake-up address */ +#define UART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit long wake-up address */ +/** + * @} + */ + +/** @defgroup UARTEx_FIFO_mode UARTEx FIFO mode + * @brief UART FIFO mode + * @{ + */ +#define UART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define UART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup UARTEx_TXFIFO_threshold_level UARTEx TXFIFO threshold level + * @brief UART TXFIFO threshold level + * @{ + */ +#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TX FIFO reaches 1/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TX FIFO reaches 1/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TX FIFO reaches 1/2 of its depth */ +#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TX FIFO reaches 3/4 of its depth */ +#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TX FIFO reaches 7/8 of its depth */ +#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TX FIFO becomes empty */ +/** + * @} + */ + +/** @defgroup UARTEx_RXFIFO_threshold_level UARTEx RXFIFO threshold level + * @brief UART RXFIFO threshold level + * @{ + */ +#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RX FIFO reaches 1/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RX FIFO reaches 1/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RX FIFO reaches 1/2 of its depth */ +#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RX FIFO reaches 3/4 of its depth */ +#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RX FIFO reaches 7/8 of its depth */ +#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RX FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @{ + */ + +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); + +void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart); +void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart); + +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); + +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); + +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold); + +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout); +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); +#endif /* HAL_DMA_MODULE_ENABLED */ + +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart); + + +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +/* An always 16 MHz is requested by UART to maintain fixed baud rate while + * system clock is switching from a frequency to another) + */ +#define UART_PERIPHCLK (16000000U) + +/** @brief Report the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU ; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__ UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) + +/** + * @brief Ensure that UART wake-up address length is valid. + * @param __ADDRESS__ UART wake-up address length. + * @retval SET (__ADDRESS__ is valid) or RESET (__ADDRESS__ is invalid) + */ +#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \ + ((__ADDRESS__) == UART_ADDRESS_DETECT_7B)) + +/** + * @brief Ensure that UART TXFIFO threshold level is valid. + * @param __THRESHOLD__ UART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that UART RXFIFO threshold level is valid. + * @param __THRESHOLD__ UART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_UART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == UART_RXFIFO_THRESHOLD_8_8)) + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_UART_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_usart.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_usart.h new file mode 100644 index 0000000000..0e36c76482 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_usart.h @@ -0,0 +1,905 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_usart.h + * @author MCD Application Team + * @brief Header file of USART HAL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_USART_H +#define STM32WL3x_HAL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup USART_Exported_Types USART Exported Types + * @{ + */ + +/** + * @brief USART Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the Usart communication baud rate. + The baud rate is computed using the following formula: + Baud Rate Register[15:4] = ((2 * fclk_pres) / + ((huart->Init.BaudRate)))[15:4] + Baud Rate Register[3] = 0 + Baud Rate Register[2:0] = (((2 * fclk_pres) / + ((huart->Init.BaudRate)))[3:0]) >> 1 + where fclk_pres is the USART input clock frequency (fclk) + divided by a prescaler. + @note Oversampling by 8 is systematically applied to + achieve high baud rates. */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USARTEx_Word_Length. */ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits. */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode. */ + + uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity. */ + + uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase. */ + + uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit. */ + + uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the USART clock source. + This parameter can be a value of @ref USART_ClockPrescaler. */ +} USART_InitTypeDef; + +/** + * @brief HAL USART State structures definition + */ +typedef enum +{ + HAL_USART_STATE_RESET = 0x00U, /*!< Peripheral is not initialized */ + HAL_USART_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ + HAL_USART_STATE_BUSY = 0x02U, /*!< an internal process is ongoing */ + HAL_USART_STATE_BUSY_TX = 0x12U, /*!< Data Transmission process is ongoing */ + HAL_USART_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing */ + HAL_USART_STATE_BUSY_TX_RX = 0x32U, /*!< Data Transmission Reception process is ongoing */ + HAL_USART_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ + HAL_USART_STATE_ERROR = 0x04U /*!< Error */ +} HAL_USART_StateTypeDef; + +/** + * @brief USART handle Structure definition + */ +typedef struct __USART_HandleTypeDef +{ + USART_TypeDef *Instance; /*!< USART registers base address */ + + USART_InitTypeDef Init; /*!< USART communication parameters */ + + const uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< USART Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< USART Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< USART Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< USART Rx Transfer Counter */ + + uint16_t Mask; /*!< USART Rx RDR register mask */ + + uint16_t NbRxDataToProcess; /*!< Number of data to process during RX ISR execution */ + + uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */ + + uint32_t SlaveMode; /*!< Enable/Disable USART SPI Slave Mode. This parameter can be a value + of @ref USARTEx_Slave_Mode */ + + uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used. This parameter can be a value + of @ref USARTEx_FIFO_mode. */ + + void (*RxISR)(struct __USART_HandleTypeDef *husart); /*!< Function pointer on Rx IRQ handler */ + + void (*TxISR)(struct __USART_HandleTypeDef *husart); /*!< Function pointer on Tx IRQ handler */ + +#if defined(HAL_DMA_MODULE_ENABLED) + DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */ + +#endif /* HAL_DMA_MODULE_ENABLED */ + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_USART_StateTypeDef State; /*!< USART communication state */ + + __IO uint32_t ErrorCode; /*!< USART Error code */ + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + void (* TxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Half Complete Callback */ + void (* TxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Complete Callback */ + void (* RxHalfCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Half Complete Callback */ + void (* RxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Complete Callback */ + void (* TxRxCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Rx Complete Callback */ + void (* ErrorCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Error Callback */ + void (* AbortCpltCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Abort Complete Callback */ + void (* RxFifoFullCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Rx Fifo Full Callback */ + void (* TxFifoEmptyCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Tx Fifo Empty Callback */ + + void (* MspInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp Init callback */ + void (* MspDeInitCallback)(struct __USART_HandleTypeDef *husart); /*!< USART Msp DeInit callback */ +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +} USART_HandleTypeDef; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +/** + * @brief HAL USART Callback ID enumeration definition + */ +typedef enum +{ + HAL_USART_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< USART Tx Half Complete Callback ID */ + HAL_USART_TX_COMPLETE_CB_ID = 0x01U, /*!< USART Tx Complete Callback ID */ + HAL_USART_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< USART Rx Half Complete Callback ID */ + HAL_USART_RX_COMPLETE_CB_ID = 0x03U, /*!< USART Rx Complete Callback ID */ + HAL_USART_TX_RX_COMPLETE_CB_ID = 0x04U, /*!< USART Tx Rx Complete Callback ID */ + HAL_USART_ERROR_CB_ID = 0x05U, /*!< USART Error Callback ID */ + HAL_USART_ABORT_COMPLETE_CB_ID = 0x06U, /*!< USART Abort Complete Callback ID */ + HAL_USART_RX_FIFO_FULL_CB_ID = 0x07U, /*!< USART Rx Fifo Full Callback ID */ + HAL_USART_TX_FIFO_EMPTY_CB_ID = 0x08U, /*!< USART Tx Fifo Empty Callback ID */ + + HAL_USART_MSPINIT_CB_ID = 0x09U, /*!< USART MspInit callback ID */ + HAL_USART_MSPDEINIT_CB_ID = 0x0AU /*!< USART MspDeInit callback ID */ + +} HAL_USART_CallbackIDTypeDef; + +/** + * @brief HAL USART Callback pointer definition + */ +typedef void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart); /*!< pointer to an USART callback function */ + +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_Error_Definition USART Error Definition + * @{ + */ +#define HAL_USART_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_USART_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_USART_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_USART_ERROR_FE (0x00000004U) /*!< Frame error */ +#define HAL_USART_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#if defined(HAL_DMA_MODULE_ENABLED) +#define HAL_USART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#endif /* HAL_DMA_MODULE_ENABLED */ +#define HAL_USART_ERROR_UDR (0x00000020U) /*!< SPI slave underrun error */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +#define HAL_USART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */ +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +#define HAL_USART_ERROR_RTO (0x00000080U) /*!< Receiver Timeout error */ +/** + * @} + */ + +/** @defgroup USART_Stop_Bits USART Number of Stop Bits + * @{ + */ +#define USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< USART frame with 0.5 stop bit */ +#define USART_STOPBITS_1 0x00000000U /*!< USART frame with 1 stop bit */ +#define USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< USART frame with 1.5 stop bits */ +#define USART_STOPBITS_2 USART_CR2_STOP_1 /*!< USART frame with 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_Parity USART Parity + * @{ + */ +#define USART_PARITY_NONE 0x00000000U /*!< No parity */ +#define USART_PARITY_EVEN USART_CR1_PCE /*!< Even parity */ +#define USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup USART_Mode USART Mode + * @{ + */ +#define USART_MODE_RX USART_CR1_RE /*!< RX mode */ +#define USART_MODE_TX USART_CR1_TE /*!< TX mode */ +#define USART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup USART_Clock USART Clock + * @{ + */ +#define USART_CLOCK_DISABLE 0x00000000U /*!< USART clock disable */ +#define USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< USART clock enable */ +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity USART Clock Polarity + * @{ + */ +#define USART_POLARITY_LOW 0x00000000U /*!< Driver enable signal is active high */ +#define USART_POLARITY_HIGH USART_CR2_CPOL /*!< Driver enable signal is active low */ +/** + * @} + */ + +/** @defgroup USART_Clock_Phase USART Clock Phase + * @{ + */ +#define USART_PHASE_1EDGE 0x00000000U /*!< USART frame phase on first clock transition */ +#define USART_PHASE_2EDGE USART_CR2_CPHA /*!< USART frame phase on second clock transition */ +/** + * @} + */ + +/** @defgroup USART_Last_Bit USART Last Bit + * @{ + */ +#define USART_LASTBIT_DISABLE 0x00000000U /*!< USART frame last data bit clock pulse not output to SCLK pin */ +#define USART_LASTBIT_ENABLE USART_CR2_LBCL /*!< USART frame last data bit clock pulse output to SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_ClockPrescaler USART Clock Prescaler + * @{ + */ +#define USART_PRESCALER_DIV1 0x00000000U /*!< fclk_pres = fclk */ +#define USART_PRESCALER_DIV2 0x00000001U /*!< fclk_pres = fclk/2 */ +#define USART_PRESCALER_DIV4 0x00000002U /*!< fclk_pres = fclk/4 */ +#define USART_PRESCALER_DIV6 0x00000003U /*!< fclk_pres = fclk/6 */ +#define USART_PRESCALER_DIV8 0x00000004U /*!< fclk_pres = fclk/8 */ +#define USART_PRESCALER_DIV10 0x00000005U /*!< fclk_pres = fclk/10 */ +#define USART_PRESCALER_DIV12 0x00000006U /*!< fclk_pres = fclk/12 */ +#define USART_PRESCALER_DIV16 0x00000007U /*!< fclk_pres = fclk/16 */ +#define USART_PRESCALER_DIV32 0x00000008U /*!< fclk_pres = fclk/32 */ +#define USART_PRESCALER_DIV64 0x00000009U /*!< fclk_pres = fclk/64 */ +#define USART_PRESCALER_DIV128 0x0000000AU /*!< fclk_pres = fclk/128 */ +#define USART_PRESCALER_DIV256 0x0000000BU /*!< fclk_pres = fclk/256 */ + +/** + * @} + */ + +/** @defgroup USART_Request_Parameters USART Request Parameters + * @{ + */ +#define USART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ /*!< Receive Data flush Request */ +#define USART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup USART_Flags USART Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define USART_FLAG_TXFT USART_ISR_TXFT /*!< USART TXFIFO threshold flag */ +#define USART_FLAG_RXFT USART_ISR_RXFT /*!< USART RXFIFO threshold flag */ +#define USART_FLAG_RXFF USART_ISR_RXFF /*!< USART RXFIFO Full flag */ +#define USART_FLAG_TXFE USART_ISR_TXFE /*!< USART TXFIFO Empty flag */ +#define USART_FLAG_REACK USART_ISR_REACK /*!< USART receive enable acknowledge flag */ +#define USART_FLAG_TEACK USART_ISR_TEACK /*!< USART transmit enable acknowledge flag */ +#define USART_FLAG_BUSY USART_ISR_BUSY /*!< USART busy flag */ +#define USART_FLAG_UDR USART_ISR_UDR /*!< SPI slave underrun error flag */ +#define USART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< USART transmit data register empty */ +#define USART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< USART TXFIFO not full */ +#define USART_FLAG_RTOF USART_ISR_RTOF /*!< USART receiver timeout flag */ +#define USART_FLAG_TC USART_ISR_TC /*!< USART transmission complete */ +#define USART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< USART read data register not empty */ +#define USART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< USART RXFIFO not empty */ +#define USART_FLAG_IDLE USART_ISR_IDLE /*!< USART idle flag */ +#define USART_FLAG_ORE USART_ISR_ORE /*!< USART overrun error */ +#define USART_FLAG_NE USART_ISR_NE /*!< USART noise error */ +#define USART_FLAG_FE USART_ISR_FE /*!< USART frame error */ +#define USART_FLAG_PE USART_ISR_PE /*!< USART parity error */ +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition USART Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ + +#define USART_IT_PE 0x0028U /*!< USART parity error interruption */ +#define USART_IT_TXE 0x0727U /*!< USART transmit data register empty interruption */ +#define USART_IT_TXFNF 0x0727U /*!< USART TX FIFO not full interruption */ +#define USART_IT_TC 0x0626U /*!< USART transmission complete interruption */ +#define USART_IT_RXNE 0x0525U /*!< USART read data register not empty interruption */ +#define USART_IT_RXFNE 0x0525U /*!< USART RXFIFO not empty interruption */ +#define USART_IT_IDLE 0x0424U /*!< USART idle interruption */ +#define USART_IT_ERR 0x0060U /*!< USART error interruption */ +#define USART_IT_ORE 0x0300U /*!< USART overrun error interruption */ +#define USART_IT_NE 0x0200U /*!< USART noise error interruption */ +#define USART_IT_FE 0x0100U /*!< USART frame error interruption */ +#define USART_IT_RXFF 0x183FU /*!< USART RXFIFO full interruption */ +#define USART_IT_TXFE 0x173EU /*!< USART TXFIFO empty interruption */ +#define USART_IT_RXFT 0x1A7CU /*!< USART RXFIFO threshold reached interruption */ +#define USART_IT_TXFT 0x1B77U /*!< USART TXFIFO threshold reached interruption */ + +/** + * @} + */ + +/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags + * @{ + */ +#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define USART_CLEAR_NEF USART_ICR_NECF /*!< Noise Error detected Clear Flag */ +#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#define USART_CLEAR_UDRF USART_ICR_UDRCF /*!< SPI slave underrun error Clear Flag */ +#define USART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO Empty Clear Flag */ +#define USART_CLEAR_RTOF USART_ICR_RTOCF /*!< USART receiver timeout clear flag */ +/** + * @} + */ + +/** @defgroup USART_Interruption_Mask USART Interruption Flags Mask + * @{ + */ +#define USART_IT_MASK 0x001FU /*!< USART interruptions flags mask */ +#define USART_CR_MASK 0x00E0U /*!< USART control register mask */ +#define USART_CR_POS 5U /*!< USART control register position */ +#define USART_ISR_MASK 0x1F00U /*!< USART ISR register mask */ +#define USART_ISR_POS 8U /*!< USART ISR register position */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup USART_Exported_Macros USART Exported Macros + * @{ + */ + +/** @brief Reset USART handle state. + * @param __HANDLE__ USART handle. + * @retval None + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->State = HAL_USART_STATE_RESET; \ + (__HANDLE__)->MspInitCallback = NULL; \ + (__HANDLE__)->MspDeInitCallback = NULL; \ + } while(0U) +#else +#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET) +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** @brief Check whether the specified USART flag is set or not. + * @param __HANDLE__ specifies the USART Handle + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref USART_FLAG_TXFT TXFIFO threshold flag + * @arg @ref USART_FLAG_RXFT RXFIFO threshold flag + * @arg @ref USART_FLAG_RXFF RXFIFO Full flag + * @arg @ref USART_FLAG_TXFE TXFIFO Empty flag + * @arg @ref USART_FLAG_REACK Receive enable acknowledge flag + * @arg @ref USART_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref USART_FLAG_BUSY Busy flag + * @arg @ref USART_FLAG_UDR SPI slave underrun error flag + * @arg @ref USART_FLAG_TXE Transmit data register empty flag + * @arg @ref USART_FLAG_TXFNF TXFIFO not full flag + * @arg @ref USART_FLAG_TC Transmission Complete flag + * @arg @ref USART_FLAG_RXNE Receive data register not empty flag + * @arg @ref USART_FLAG_RXFNE RXFIFO not empty flag + * @arg @ref USART_FLAG_RTOF Receiver Timeout flag + * @arg @ref USART_FLAG_IDLE Idle Line detection flag + * @arg @ref USART_FLAG_ORE OverRun Error flag + * @arg @ref USART_FLAG_NE Noise Error flag + * @arg @ref USART_FLAG_FE Framing Error flag + * @arg @ref USART_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Clear the specified USART pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref USART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag + * @arg @ref USART_CLEAR_RTOF Receiver Timeout clear flag + * @arg @ref USART_CLEAR_UDRF SPI slave underrun error Clear Flag + * @retval None + */ +#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the USART PE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_PEF) + +/** @brief Clear the USART FE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_FEF) + +/** @brief Clear the USART NE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_NEF) + +/** @brief Clear the USART ORE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_OREF) + +/** @brief Clear the USART IDLE pending flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_IDLEF) + +/** @brief Clear the USART TX FIFO empty clear flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_TXFECF(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_TXFECF) + +/** @brief Clear SPI slave underrun error flag. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_CLEAR_UDRFLAG(__HANDLE__) __HAL_USART_CLEAR_FLAG((__HANDLE__), USART_CLEAR_UDRF) + +/** @brief Enable the specified USART interrupt. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__)\ + (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 |= (1UL << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 |= (1UL << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1UL << ((__INTERRUPT__) & USART_IT_MASK)))) + +/** @brief Disable the specified USART interrupt. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__)\ + (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)?\ + ((__HANDLE__)->Instance->CR1 &= ~ (1UL << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)?\ + ((__HANDLE__)->Instance->CR2 &= ~ (1UL << ((__INTERRUPT__) & USART_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1UL << ((__INTERRUPT__) & USART_IT_MASK)))) + +/** @brief Check whether the specified USART interrupt has occurred or not. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_ORE OverRun Error interrupt + * @arg @ref USART_IT_NE Noise Error interrupt + * @arg @ref USART_IT_FE Framing Error interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_USART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\ + & (0x01U << (((__INTERRUPT__) & USART_ISR_MASK)>>\ + USART_ISR_POS))) != 0U) ? SET : RESET) + +/** @brief Check whether the specified USART interrupt source is enabled or not. + * @param __HANDLE__ specifies the USART Handle. + * @param __INTERRUPT__ specifies the USART interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref USART_IT_RXFF RXFIFO Full interrupt + * @arg @ref USART_IT_TXFE TXFIFO Empty interrupt + * @arg @ref USART_IT_RXFT RXFIFO threshold interrupt + * @arg @ref USART_IT_TXFT TXFIFO threshold interrupt + * @arg @ref USART_IT_TXE Transmit Data Register empty interrupt + * @arg @ref USART_IT_TXFNF TX FIFO not full interrupt + * @arg @ref USART_IT_TC Transmission complete interrupt + * @arg @ref USART_IT_RXNE Receive Data register not empty interrupt + * @arg @ref USART_IT_RXFNE RXFIFO not empty interrupt + * @arg @ref USART_IT_IDLE Idle line detection interrupt + * @arg @ref USART_IT_ORE OverRun Error interrupt + * @arg @ref USART_IT_NE Noise Error interrupt + * @arg @ref USART_IT_FE Framing Error interrupt + * @arg @ref USART_IT_PE Parity Error interrupt + * @retval The new state of __INTERRUPT__ (SET or RESET). + */ +#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x01U) ?\ + (__HANDLE__)->Instance->CR1 : \ + (((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x02U) ?\ + (__HANDLE__)->Instance->CR2 : \ + (__HANDLE__)->Instance->CR3)) & (0x01U <<\ + (((uint16_t)(__INTERRUPT__)) &\ + USART_IT_MASK))) != 0U) ? SET : RESET) + +/** @brief Clear the specified USART ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt. + * This parameter can be one of the following values: + * @arg @ref USART_CLEAR_PEF Parity Error Clear Flag + * @arg @ref USART_CLEAR_FEF Framing Error Clear Flag + * @arg @ref USART_CLEAR_NEF Noise detected Clear Flag + * @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag + * @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag + * @arg @ref USART_CLEAR_RTOF Receiver timeout clear flag + * @arg @ref USART_CLEAR_TXFECF TXFIFO empty clear Flag + * @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag + * @retval None + */ +#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific USART request flag. + * @param __HANDLE__ specifies the USART Handle. + * @param __REQ__ specifies the request flag to set. + * This parameter can be one of the following values: + * @arg @ref USART_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref USART_TXDATA_FLUSH_REQUEST Transmit data flush Request + * + * @retval None + */ +#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the USART one bit sample method. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the USART one bit sample method. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) + +/** @brief Enable USART. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable USART. + * @param __HANDLE__ specifies the USART Handle. + * @retval None + */ +#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup USART_Private_Macros USART Private Macros + * @{ + */ + +/** @brief Get USART clock division factor from clock prescaler value. + * @param __CLOCKPRESCALER__ USART prescaler value. + * @retval USART clock division factor + */ +#define USART_GET_DIV_FACTOR(__CLOCKPRESCALER__) \ + (((__CLOCKPRESCALER__) == USART_PRESCALER_DIV1) ? 1U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV2) ? 2U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV4) ? 4U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV6) ? 6U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV8) ? 8U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV10) ? 10U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV12) ? 12U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV16) ? 16U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV32) ? 32U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV64) ? 64U : \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV128) ? 128U : 256U) + +/** @brief BRR division operation to set BRR register in 8-bit oversampling mode. + * @param __PCLK__ USART clock. + * @param __BAUD__ Baud rate set by the user. + * @param __CLOCKPRESCALER__ USART prescaler value. + * @retval Division result + */ +#define USART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__)\ + (((((__PCLK__)/USART_GET_DIV_FACTOR(__CLOCKPRESCALER__))*2U)\ + + ((__BAUD__)/2U)) / (__BAUD__)) + +/* An always 16 MHz is requested by USART to maintain fixed baud rate while + * system clock is switching from a frequency to another) + */ +#define USART_PERIPHCLK (16000000U) + +/** @brief Check USART Baud rate. + * @param __BAUDRATE__ Baudrate specified by the user. + * The maximum Baud Rate is derived from the maximum clock on WL3 (i.e. 16 MHz) + * divided by the smallest oversampling used on the USART (i.e. 8) + * @retval SET (__BAUDRATE__ is valid) or RESET (__BAUDRATE__ is invalid) */ +#define IS_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 2000000U) + +/** + * @brief Ensure that USART frame number of stop bits is valid. + * @param __STOPBITS__ USART frame number of stop bits. + * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) + */ +#define IS_USART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == USART_STOPBITS_0_5) || \ + ((__STOPBITS__) == USART_STOPBITS_1) || \ + ((__STOPBITS__) == USART_STOPBITS_1_5) || \ + ((__STOPBITS__) == USART_STOPBITS_2)) + +/** + * @brief Ensure that USART frame parity is valid. + * @param __PARITY__ USART frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_USART_PARITY(__PARITY__) (((__PARITY__) == USART_PARITY_NONE) || \ + ((__PARITY__) == USART_PARITY_EVEN) || \ + ((__PARITY__) == USART_PARITY_ODD)) + +/** + * @brief Ensure that USART communication mode is valid. + * @param __MODE__ USART communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_USART_MODE(__MODE__) ((((__MODE__) & 0xFFFFFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that USART clock state is valid. + * @param __CLOCK__ USART clock state. + * @retval SET (__CLOCK__ is valid) or RESET (__CLOCK__ is invalid) + */ +#define IS_USART_CLOCK(__CLOCK__) (((__CLOCK__) == USART_CLOCK_DISABLE) || \ + ((__CLOCK__) == USART_CLOCK_ENABLE)) + +/** + * @brief Ensure that USART frame polarity is valid. + * @param __CPOL__ USART frame polarity. + * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) + */ +#define IS_USART_POLARITY(__CPOL__) (((__CPOL__) == USART_POLARITY_LOW) || ((__CPOL__) == USART_POLARITY_HIGH)) + +/** + * @brief Ensure that USART frame phase is valid. + * @param __CPHA__ USART frame phase. + * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) + */ +#define IS_USART_PHASE(__CPHA__) (((__CPHA__) == USART_PHASE_1EDGE) || ((__CPHA__) == USART_PHASE_2EDGE)) + +/** + * @brief Ensure that USART frame last bit clock pulse setting is valid. + * @param __LASTBIT__ USART frame last bit clock pulse setting. + * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) + */ +#define IS_USART_LASTBIT(__LASTBIT__) (((__LASTBIT__) == USART_LASTBIT_DISABLE) || \ + ((__LASTBIT__) == USART_LASTBIT_ENABLE)) + +/** + * @brief Ensure that USART request parameter is valid. + * @param __PARAM__ USART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_USART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == USART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == USART_TXDATA_FLUSH_REQUEST)) + +/** + * @brief Ensure that USART Prescaler is valid. + * @param __CLOCKPRESCALER__ USART Prescaler value. + * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid) + */ +#define IS_USART_PRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == USART_PRESCALER_DIV1) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV2) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV4) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV6) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV8) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV10) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV12) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV16) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV32) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV64) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV128) || \ + ((__CLOCKPRESCALER__) == USART_PRESCALER_DIV256)) + +/** + * @} + */ + +/* Include USART HAL Extended module */ +#include "stm32wl3x_hal_usart_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart); +void HAL_USART_MspInit(USART_HandleTypeDef *husart); +void HAL_USART_MspDeInit(USART_HandleTypeDef *husart); + +/* Callbacks Register/UnRegister functions ***********************************/ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, + pUSART_CallbackTypeDef pCallback); +HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @addtogroup USART_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size, + uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +#if defined(HAL_DMA_MODULE_ENABLED) +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size); +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart); +#endif /* HAL_DMA_MODULE_ENABLED */ +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart); + +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart); +void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart); +void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart); +void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** @addtogroup USART_Exported_Functions_Group4 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_USART_StateTypeDef HAL_USART_GetState(const USART_HandleTypeDef *husart); +uint32_t HAL_USART_GetError(const USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_USART_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_usart_ex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_usart_ex.h new file mode 100644 index 0000000000..f5797b87e5 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_hal_usart_ex.h @@ -0,0 +1,281 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_usart_ex.h + * @author MCD Application Team + * @brief Header file of USART HAL Extended module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_HAL_USART_EX_H +#define STM32WL3x_HAL_USART_EX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal_def.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup USARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USARTEx_Exported_Constants USARTEx Exported Constants + * @{ + */ + +/** @defgroup USARTEx_Word_Length USARTEx Word Length + * @{ + */ +#define USART_WORDLENGTH_7B (USART_CR1_M1) /*!< 7-bit long USART frame */ +#define USART_WORDLENGTH_8B (0x00000000U) /*!< 8-bit long USART frame */ +#define USART_WORDLENGTH_9B (USART_CR1_M0) /*!< 9-bit long USART frame */ +/** + * @} + */ + +/** @defgroup USARTEx_Slave_Select_management USARTEx Slave Select Management + * @{ + */ +#define USART_NSS_HARD 0x00000000U /*!< SPI slave selection depends on NSS input pin */ +#define USART_NSS_SOFT USART_CR2_DIS_NSS /*!< SPI slave is always selected and NSS input pin is ignored */ +/** + * @} + */ + + +/** @defgroup USARTEx_Slave_Mode USARTEx Synchronous Slave mode enable + * @brief USART SLAVE mode + * @{ + */ +#define USART_SLAVEMODE_DISABLE 0x00000000U /*!< USART SPI Slave Mode Enable */ +#define USART_SLAVEMODE_ENABLE USART_CR2_SLVEN /*!< USART SPI Slave Mode Disable */ +/** + * @} + */ + +/** @defgroup USARTEx_FIFO_mode USARTEx FIFO mode + * @brief USART FIFO mode + * @{ + */ +#define USART_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable */ +#define USART_FIFOMODE_ENABLE USART_CR1_FIFOEN /*!< FIFO mode enable */ +/** + * @} + */ + +/** @defgroup USARTEx_TXFIFO_threshold_level USARTEx TXFIFO threshold level + * @brief USART TXFIFO level + * @{ + */ +#define USART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */ +#define USART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */ +#define USART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */ +#define USART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */ +#define USART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */ +#define USART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */ +/** + * @} + */ + +/** @defgroup USARTEx_RXFIFO_threshold_level USARTEx RXFIFO threshold level + * @brief USART RXFIFO level + * @{ + */ +#define USART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */ +#define USART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */ +#define USART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */ +#define USART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */ +#define USART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */ +#define USART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup USARTEx_Private_Macros USARTEx Private Macros + * @{ + */ + +/** @brief Compute the USART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__ specifies the USART Handle. + * @retval None, the mask to apply to USART RDR register is stored in (__HANDLE__)->Mask field. + */ +#define USART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FFU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FFU; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FFU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007FU; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007FU; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003FU; \ + } \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x0000U; \ + } \ + } while(0U) + +/** + * @brief Ensure that USART frame length is valid. + * @param __LENGTH__ USART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_USART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == USART_WORDLENGTH_7B) || \ + ((__LENGTH__) == USART_WORDLENGTH_8B) || \ + ((__LENGTH__) == USART_WORDLENGTH_9B)) + +/** + * @brief Ensure that USART Negative Slave Select (NSS) pin management is valid. + * @param __NSS__ USART Negative Slave Select pin management. + * @retval SET (__NSS__ is valid) or RESET (__NSS__ is invalid) + */ +#define IS_USART_NSS(__NSS__) (((__NSS__) == USART_NSS_HARD) || \ + ((__NSS__) == USART_NSS_SOFT)) + +/** + * @brief Ensure that USART Slave Mode is valid. + * @param __STATE__ USART Slave Mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_USART_SLAVEMODE(__STATE__) (((__STATE__) == USART_SLAVEMODE_DISABLE ) || \ + ((__STATE__) == USART_SLAVEMODE_ENABLE)) + +/** + * @brief Ensure that USART FIFO mode is valid. + * @param __STATE__ USART FIFO mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_USART_FIFO_MODE_STATE(__STATE__) (((__STATE__) == USART_FIFOMODE_DISABLE ) || \ + ((__STATE__) == USART_FIFOMODE_ENABLE)) + +/** + * @brief Ensure that USART TXFIFO threshold level is valid. + * @param __THRESHOLD__ USART TXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_USART_TXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == USART_TXFIFO_THRESHOLD_8_8)) + +/** + * @brief Ensure that USART RXFIFO threshold level is valid. + * @param __THRESHOLD__ USART RXFIFO threshold level. + * @retval SET (__THRESHOLD__ is valid) or RESET (__THRESHOLD__ is invalid) + */ +#define IS_USART_RXFIFO_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_8) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_4) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_1_2) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_3_4) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_7_8) || \ + ((__THRESHOLD__) == USART_RXFIFO_THRESHOLD_8_8)) +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup USARTEx_Exported_Functions_Group1 + * @{ + */ + +/* IO operation functions *****************************************************/ +void HAL_USARTEx_RxFifoFullCallback(USART_HandleTypeDef *husart); +void HAL_USARTEx_TxFifoEmptyCallback(USART_HandleTypeDef *husart); + +/** + * @} + */ + +/** @addtogroup USARTEx_Exported_Functions_Group2 + * @{ + */ + +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_USARTEx_EnableSlaveMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_DisableSlaveMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_ConfigNSS(USART_HandleTypeDef *husart, uint32_t NSSConfig); +HAL_StatusTypeDef HAL_USARTEx_EnableFifoMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_DisableFifoMode(USART_HandleTypeDef *husart); +HAL_StatusTypeDef HAL_USARTEx_SetTxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold); +HAL_StatusTypeDef HAL_USARTEx_SetRxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_HAL_USART_EX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_adc.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_adc.h new file mode 100644 index 0000000000..cc90541103 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_adc.h @@ -0,0 +1,3040 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_adc.h + * @author GPM Application Team + * @brief Header file of ADC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_ADC_H +#define STM32WL3x_LL_ADC_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cpluplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @defgroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Constants ADC Private Constants + * @{ + */ + +/* Internal mask for ADC sequencer: */ +/* To select into literal LL_ADC_RANK_x the relevant bits for: */ +/* - sequencer register offset */ +/* - sequencer rank bits position into the selected register */ + +/* Internal register offset for ADC sequencer configuration */ +/* (offset placed into a spare area of literal definition) */ +#define ADC_SEQ_1_REGOFFSET (0x00000000UL) +#define ADC_SEQ_2_REGOFFSET (0x00000100UL) + +#define ADC_SEQ_X_REGOFFSET_MASK (ADC_SEQ_1_REGOFFSET | ADC_SEQ_2_REGOFFSET) +#define ADC_SEQ_X_REGOFFSET_POS (8UL) /* Position of bits ADC_SEQ_x_REGOFFSET in ADC_REG_SEQ_X_REGOFFSET_MASK*/ +#define ADC_RANK_ID_SEQ_X_MASK (0xFFUL) + +/* Definition of ADC sequencer bits information to be inserted */ +/* into ADC sequencer ranks literals definition. */ +#define ADC_RANK_1_SEQ_X_BITOFFSET_POS (ADC_SEQ_1_SEQ0_Pos) +#define ADC_RANK_2_SEQ_X_BITOFFSET_POS (ADC_SEQ_1_SEQ1_Pos) +#define ADC_RANK_3_SEQ_X_BITOFFSET_POS (ADC_SEQ_1_SEQ2_Pos) +#define ADC_RANK_4_SEQ_X_BITOFFSET_POS (ADC_SEQ_1_SEQ3_Pos) +#define ADC_RANK_5_SEQ_X_BITOFFSET_POS (ADC_SEQ_1_SEQ4_Pos) +#define ADC_RANK_6_SEQ_X_BITOFFSET_POS (ADC_SEQ_1_SEQ5_Pos) +#define ADC_RANK_7_SEQ_X_BITOFFSET_POS (ADC_SEQ_1_SEQ6_Pos) +#define ADC_RANK_8_SEQ_X_BITOFFSET_POS (ADC_SEQ_1_SEQ7_Pos) +#define ADC_RANK_9_SEQ_X_BITOFFSET_POS (ADC_SEQ_2_SEQ8_Pos) +#define ADC_RANK_10_SEQ_X_BITOFFSET_POS (ADC_SEQ_2_SEQ9_Pos) +#define ADC_RANK_11_SEQ_X_BITOFFSET_POS (ADC_SEQ_2_SEQ10_Pos) +#define ADC_RANK_12_SEQ_X_BITOFFSET_POS (ADC_SEQ_2_SEQ11_Pos) +#define ADC_RANK_13_SEQ_X_BITOFFSET_POS (ADC_SEQ_2_SEQ12_Pos) +#define ADC_RANK_14_SEQ_X_BITOFFSET_POS (ADC_SEQ_2_SEQ13_Pos) +#define ADC_RANK_15_SEQ_X_BITOFFSET_POS (ADC_SEQ_2_SEQ14_Pos) +#define ADC_RANK_16_SEQ_X_BITOFFSET_POS (ADC_SEQ_2_SEQ15_Pos) + +static const uint8_t ADC_CHANNEL_SWITCH_POS_LUT[12] = +{ + (uint8_t)(ADC_SWITCH_SE_VIN_0_Pos), /*!< ADC_SWITCH_SE_VIN_0 Channel ADC_INM0 */ + (uint8_t)(ADC_SWITCH_SE_VIN_1_Pos), /*!< ADC_SWITCH_SE_VIN_1 Channel ADC_INM1 */ + (uint8_t)(ADC_SWITCH_SE_VIN_2_Pos), /*!< ADC_SWITCH_SE_VIN_2 Channel ADC_INM2 */ + (uint8_t)(ADC_SWITCH_SE_VIN_3_Pos), /*!< ADC_SWITCH_SE_VIN_3 Channel ADC_INM3 */ + (uint8_t)(ADC_SWITCH_SE_VIN_4_Pos), /*!< ADC_SWITCH_SE_VIN_4 Channel ADC_INP1 */ + (uint8_t)(ADC_SWITCH_SE_VIN_5_Pos), /*!< ADC_SWITCH_SE_VIN_5 Channel ADC_INP2 */ + (uint8_t)(ADC_SWITCH_SE_VIN_6_Pos), /*!< ADC_SWITCH_SE_VIN_6 Channel ADC_INP3 */ + (uint8_t)(ADC_SWITCH_SE_VIN_7_Pos), /*!< ADC_SWITCH_SE_VIN_7 Channel ADC_INP4 */ + (uint8_t)(ADC_SWITCH_SE_VIN_0_Pos), /*!< ADC_SWITCH_SE_VIN_0 Channel ADC_INP1 - ADC_INM1 */ + (uint8_t)(ADC_SWITCH_SE_VIN_1_Pos), /*!< ADC_SWITCH_SE_VIN_1 Channel ADC_INP2 - ADC_INM2 */ + (uint8_t)(ADC_SWITCH_SE_VIN_2_Pos), /*!< ADC_SWITCH_SE_VIN_2 Channel ADC_INP3 - ADC_INM3 */ + (uint8_t)(ADC_SWITCH_SE_VIN_3_Pos), /*!< ADC_SWITCH_SE_VIN_3 Channel ADC_INP4 - ADC_INM4 */ +}; + +#define TEMPSENSOR_TCK_ADDR ((uint32_t*) (0x10001E5CUL)) /* Internal temperature sensor, address of + parameter TCK: TCK is the chuck temperature in 0.1DegC (e.g. 30DegC = 300) */ +#define TEMPSENSOR_C30_ADDR ((uint32_t*) (0x10001E60UL)) /* Internal temperature sensor, address of + parameter C30: On this STM32 series, temperature sensor ADC raw data + acquired at temperature 30 DegC. */ + +#define TEMPSENSOR_C30_TEMP (30UL) /* Internal temperature sensor, temperature + at which temperature sensor has been calibrated in production for data + into TEMPSENSOR_C30_ADDR (tolerance: +-5 DegC) (unit: DegC). */ + +/** @defgroup ADC_LL_CALIB_ADDRESS ADC calibration points location + * @brief Defines the memory address of the calibration points. + * @{ + */ +#define ADC_LAYOUT_ID (0x10001EFCUL) +#define ADC_CALIB_ADDRESS_VINPX_3V6 (0x10001E20UL) +#define ADC_CALIB_ADDRESS_VINMX_3V6 (0x10001E1CUL) +#define ADC_CALIB_ADDRESS_VINDIFF_3V6 (0x10001E18UL) +#define ADC_CALIB_ADDRESS_VINPX_2V4 (0x10001E14UL) +#define ADC_CALIB_ADDRESS_VINMX_2V4 (0x10001E10UL) +#define ADC_CALIB_ADDRESS_VINDIFF_2V4 (0x10001E0CUL) +#define ADC_CALIB_ADDRESS_VINPX_1V2 (0x10001E08UL) +#define ADC_CALIB_ADDRESS_VINMX_1V2 (0x10001E04UL) +#define ADC_CALIB_ADDRESS_VINDIFF_1V2 (0x10001E00UL) + +/** + * @} + */ + +/* Uncomment this symbol to use the version with floating point of the conversion functions */ +#define BLE_ADC_OUTPUT_FLOAT + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Private_Macros ADC Private Macros + * @{ + */ + + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_ES_INIT ADC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition with common setting for the ADC. + */ +typedef struct +{ + FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) + or continuous mode for ADC group regular, after the first ADC conversion + start trigger occurred (software start or external trigger). This parameter + can be set to ENABLE or DISABLE. + This feature can be modified afterwards using unitary function + @ref LL_ADC_ContinuousModeEnable() or @ref LL_ADC_ContinuousModeDisable().*/ + + uint32_t SequenceLength; /*!< Specify the length of the conversion sequence. + This parameter must be a number between Min_Data = 1 and Max_Data = 16. + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequenceLength(). */ + + uint32_t SamplingMode; /*!< Specifies the input sampling mode. + This parameter can be a value of @ref ADC_LL_SAMPLING_METHOD. + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetInputSamplingMode(). */ + + uint32_t SampleRate; /*!< Specify the ADC sample rate. + This parameter can be a value of @ref ADC_LL_SAMPLE_RATE. + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSampleRate(). */ + + uint32_t Overrun; /*!< Specifies the overrung policy applied to the data. + This parameter can be a value of @ref ADC_LL_OVERRUN_CONFIG. + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetOverrunDS(). */ +} LL_ADC_InitTypeDef; + + +/** + * @brief Structure definition containing the input voltage range + * for each type of ADC input channel. + */ +typedef struct +{ + uint32_t InputVinm0_Vinp0Vinm0; /*!< Set the input voltage range for single VINM0 or differential (VINP0 - VINM0). + This parameter can be a value of @ref ADC_LL_INPUT_VOLTAGE_RANGE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetChannelVoltageRange(). */ + + uint32_t InputVinm1_Vinp1Vinm1; /*!< Set the input voltage range for single VINM1 or differential (VINP1 - VINM1). + This parameter can be a value of @ref ADC_LL_INPUT_VOLTAGE_RANGE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetChannelVoltageRange(). */ + + uint32_t InputVinm2_Vinp2Vinm2; /*!< Set the input voltage range for single VINM2 or differential (VINP2 - VINM2). + This parameter can be a value of @ref ADC_LL_INPUT_VOLTAGE_RANGE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetChannelVoltageRange(). */ + + uint32_t InputVinm3_Vinp3Vinm3; /*!< Set the input voltage range for single VINM3 or differential (VINP3 - VINM3). + This parameter can be a value of @ref ADC_LL_INPUT_VOLTAGE_RANGE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetChannelVoltageRange(). */ + + uint32_t InputVinp0; /*!< Set the input voltage range for single VINP0. + This parameter can be a value of @ref ADC_LL_INPUT_VOLTAGE_RANGE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetChannelVoltageRange(). */ + + uint32_t InputVinp1; /*!< Set the input voltage range for single VINP1. + This parameter can be a value of @ref ADC_LL_INPUT_VOLTAGE_RANGE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetChannelVoltageRange(). */ + + uint32_t InputVinp2; /*!< Set the input voltage range for single VINP2. + This parameter can be a value of @ref ADC_LL_INPUT_VOLTAGE_RANGE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetChannelVoltageRange(). */ + + uint32_t InputVinp3; /*!< Set the input voltage range for single VINP3. + This parameter can be a value of @ref ADC_LL_INPUT_VOLTAGE_RANGE + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetChannelVoltageRange(). */ + +} LL_ADC_VoltRangeInitTypeDef; + + +/** + * @brief Structure definition with the input channel entry + * for each element of the conversion sequence. + */ +typedef struct +{ + uint32_t ChannelForSeq0; /*!< Set the channel number code for the 1st conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq1; /*!< Set the channel number code for the 2nd conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq2; /*!< Set the channel number code for the 3rd conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq3; /*!< Set the channel number code for the 4th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq4; /*!< Set the channel number code for the 5th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq5; /*!< Set the channel number code for the 6th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq6; /*!< Set the channel number code for the 7th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq7; /*!< Set the channel number code for the 8th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq8; /*!< Set the channel number code for the 9th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq9; /*!< Set the channel number code for the 10th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq10; /*!< Set the channel number code for the 11th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq11; /*!< Set the channel number code for the 12th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq12; /*!< Set the channel number code for the 13th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq13; /*!< Set the channel number code for the 14th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq14; /*!< Set the channel number code for the 15th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + + uint32_t ChannelForSeq15; /*!< Set the channel number code for the 16th conversion of the sequence. + This parameter can be a value of @ref ADC_LL_CHANNEL + This feature can be modified afterwards using unitary function + @ref LL_ADC_SetSequencerRanks(). */ + +} LL_ADC_SequenceInitTypeDef; + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ + + +/** @defgroup ADC_LL_Exported_Constants ADC Exported Constants + * @{ + */ + + +/** @defgroup ADC_LL_SAMPLING_METHOD ADC input sampling method definitions + * @brief It defines the parameters used for the functions @ref LL_ADC_SetInputSamplingMode() + * and @ref LL_ADC_GetInputSamplingMode() + * @{ + */ + +#define LL_ADC_SAMPLING_AT_START (0x00000000UL) /*!< Sampling only at conversion start */ +#define LL_ADC_SAMPLING_AT_END (ADC_CONF_ADC_CONT_1V2) /*!< Sampling starts at the end of conversion (default)*/ + +/** + * @} + */ + + +/** @defgroup ADC_LL_OVERRUN_CONFIG ADC overrun configuration definitions + * @brief It defines the parameters used for the functions @ref LL_ADC_SetOverrunDF(), @ref LL_ADC_GetOverrunDF(), + * @ref LL_ADC_SetOverrunDS(), and @ref LL_ADC_GetOverrunDS() + * @{ + */ + +#define LL_ADC_NEW_DATA_IS_LOST (0x00000000UL) /*!< Previous data is preserved, new data is lost. */ +#define LL_ADC_NEW_DATA_IS_KEPT (ADC_CONF_OVR_DS_CFG) /*!< Previous data is overwritten, new data is kept. */ + +/** + * @} + */ + +/** @defgroup ADC_LL_SAMPLE_RATE ADC sample rate definitions + * @brief It defines the parameters used for the functions @ref LL_ADC_SetSampleRate() + * and @ref LL_ADC_GetSampleRate() + * The ADC conversion rate is: System clock / (16 + 16*SAMPLE_RATE_MSB + 4*SAMPLE_RATE) + * @{ + */ +#define LL_ADC_SAMPLE_RATE_16 (0x0UL) /*!< ADC conversion rate at F_ADC_CLK / 16 */ +#define LL_ADC_SAMPLE_RATE_20 (0x1UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC conversion rate at F_ADC_CLK / 20 */ +#define LL_ADC_SAMPLE_RATE_24 (0x2UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC conversion rate at F_ADC_CLK / 24 */ +#define LL_ADC_SAMPLE_RATE_28 (0x3UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC conversion rate at F_ADC_CLK / 28 */ + +#define LL_ADC_SAMPLE_RATE_32 (0x1UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x0UL) /*!< ADC + conversion rate at F_ADC_CLK / 32 */ +#define LL_ADC_SAMPLE_RATE_36 (0x1UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x1UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 36 */ +#define LL_ADC_SAMPLE_RATE_40 (0x1UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x2UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 40 */ +#define LL_ADC_SAMPLE_RATE_44 (0x1UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x3UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 44 */ +#define LL_ADC_SAMPLE_RATE_48 (0x2UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x0UL) /*!< ADC + conversion rate at F_ADC_CLK / 48 */ +#define LL_ADC_SAMPLE_RATE_52 (0x2UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x1UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 52 */ +#define LL_ADC_SAMPLE_RATE_56 (0x2UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x2UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 56 */ +#define LL_ADC_SAMPLE_RATE_60 (0x2UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x3UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 60 */ +#define LL_ADC_SAMPLE_RATE_64 (0x3UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x0UL) /*!< ADC + conversion rate at F_ADC_CLK / 64 */ +#define LL_ADC_SAMPLE_RATE_68 (0x3UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x1UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 68 */ +#define LL_ADC_SAMPLE_RATE_72 (0x3UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x2UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 72 */ +#define LL_ADC_SAMPLE_RATE_76 (0x3UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x3UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 76 */ +#define LL_ADC_SAMPLE_RATE_80 (0x4UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x0UL) /*!< ADC + conversion rate at F_ADC_CLK / 80 */ +#define LL_ADC_SAMPLE_RATE_84 (0x4UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x1UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 84 */ +#define LL_ADC_SAMPLE_RATE_88 (0x4UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x2UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 88 */ +#define LL_ADC_SAMPLE_RATE_92 (0x4UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x3UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 92 */ +#define LL_ADC_SAMPLE_RATE_96 (0x5UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x0UL) /*!< ADC + conversion rate at F_ADC_CLK / 96 */ +#define LL_ADC_SAMPLE_RATE_100 (0x5UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x1UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 100 */ +#define LL_ADC_SAMPLE_RATE_104 (0x5UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x2UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 104 */ +#define LL_ADC_SAMPLE_RATE_108 (0x5UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x3UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 108 */ +#define LL_ADC_SAMPLE_RATE_112 (0x6UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x0UL) /*!< ADC + conversion rate at F_ADC_CLK / 112 */ +#define LL_ADC_SAMPLE_RATE_116 (0x6UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x1UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 116 */ +#define LL_ADC_SAMPLE_RATE_120 (0x6UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x2UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 120 */ +#define LL_ADC_SAMPLE_RATE_124 (0x6UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x3UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 124 */ +#define LL_ADC_SAMPLE_RATE_128 (0x7UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x0UL) /*!< ADC + conversion rate at F_ADC_CLK / 128 */ +#define LL_ADC_SAMPLE_RATE_132 (0x7UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x1UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 132 */ +#define LL_ADC_SAMPLE_RATE_136 (0x7UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x2UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 136 */ +#define LL_ADC_SAMPLE_RATE_140 (0x7UL << ADC_CONF_SAMPLE_RATE_MSB_Pos | 0x3UL << ADC_CONF_SAMPLE_RATE_Pos) /*!< ADC + conversion rate at F_ADC_CLK / 140 */ +/** + * @} + */ + + +/** @defgroup ADC_LL_INPUT_VOLTAGE_RANGE ADC input voltage range definitions + * @brief It defines the parameters used for the functions @ref LL_ADC_SetChannelVoltageRange() + * and @ref LL_ADC_GetChannelVoltageRange() + * @{ + */ + +#define LL_ADC_VIN_RANGE_1V2 (0UL) /*!< ADC input voltage range up to 1.2 V */ +#define LL_ADC_VIN_RANGE_2V4 (2UL) /*!< ADC input voltage range up to 2.4 V */ +#define LL_ADC_VIN_RANGE_3V6 (3UL) /*!< ADC input voltage range up to 3.6 V */ + +/** + * @} + */ + + +/** @defgroup ADC_LL_DEFAULT_RANGE_VALUE ADC default range value definitions + * @brief It defines the parameters used as default range value + * @{ + */ + +#define LL_ADC_DEFAULT_RANGE_VALUE_1V2 (0xFFFUL) /*!< ADC default range value up to 1.2 V */ +#define LL_ADC_DEFAULT_RANGE_VALUE_2V4 (0x7FFUL) /*!< ADC default range value up to 2.4 V */ +#define LL_ADC_DEFAULT_RANGE_VALUE_3V6 (0x555UL) /*!< ADC default range value up to 3.6 V */ + +/** + * @} + */ + + +/** @defgroup ADC_LL_DS_DATA_WIDTH ADC Down Sampler data width definitions + * @brief It defines the parameters used for the functions @ref LL_ADC_SetDSDataOutputWidth() + * and @ref LL_ADC_GetDSDataOutputWidth() + * @{ + */ + +#define LL_ADC_DS_DATA_WIDTH_12_BIT (0UL) /*!< ADC Down Sampler data width 12 bits */ +#define LL_ADC_DS_DATA_WIDTH_13_BIT (1UL) /*!< ADC Down Sampler data width 13 bits */ +#define LL_ADC_DS_DATA_WIDTH_14_BIT (2UL) /*!< ADC Down Sampler data width 14 bits */ +#define LL_ADC_DS_DATA_WIDTH_15_BIT (3UL) /*!< ADC Down Sampler data width 15 bits */ +#define LL_ADC_DS_DATA_WIDTH_16_BIT (4UL) /*!< ADC Down Sampler data width 16 bits */ + +/** + * @} + */ + + +/** @defgroup ADC_LL_DS_RATIO ADC Down Sampler ratio definitions + * @brief It defines the parameters used for the functions @ref LL_ADC_SetDSDataOutputRatio() + * and @ref LL_ADC_GetDSDataOutputRatio() + * @{ + */ + +#define LL_ADC_DS_RATIO_1 (0UL) /*!< ADC Down Sampler ratio 1, no down sampling (default) */ +#define LL_ADC_DS_RATIO_2 (1UL) /*!< ADC Down Sampler ratio 2 */ +#define LL_ADC_DS_RATIO_4 (2UL) /*!< ADC Down Sampler ratio 4 */ +#define LL_ADC_DS_RATIO_8 (3UL) /*!< ADC Down Sampler ratio 8 */ +#define LL_ADC_DS_RATIO_16 (4UL) /*!< ADC Down Sampler ratio 16 */ +#define LL_ADC_DS_RATIO_32 (5UL) /*!< ADC Down Sampler ratio 32 */ +#define LL_ADC_DS_RATIO_64 (6UL) /*!< ADC Down Sampler ratio 64 */ +#define LL_ADC_DS_RATIO_128 (7UL) /*!< ADC Down Sampler ratio 128 */ + +/** + * @} + */ + + +/** @defgroup ADC_LL_CHANNEL ADC channel number code for conversion definitions + * @brief It defines the parameters used for the functions @ref LL_ADC_SetSequencerRanks() + * @{ + */ + +#define LL_ADC_CHANNEL_VINM0 (0x00UL) /*!< ADC channel for VINM0 to single negative input */ +#define LL_ADC_CHANNEL_VINM1 (0x01UL) /*!< ADC channel for VINM1 to single negative input */ +#define LL_ADC_CHANNEL_VINM2 (0x02UL) /*!< ADC channel for VINM2 to single negative input */ +#define LL_ADC_CHANNEL_VINM3 (0x03UL) /*!< ADC channel for VINM3 to single negative input */ +#define LL_ADC_CHANNEL_VINP0 (0x04UL) /*!< ADC channel for VINP0 to single positive input */ +#define LL_ADC_CHANNEL_VINP1 (0x05UL) /*!< ADC channel for VINP1 to single positive input */ +#define LL_ADC_CHANNEL_VINP2 (0x06UL) /*!< ADC channel for VINP2 to single positive input */ +#define LL_ADC_CHANNEL_VINP3 (0x07UL) /*!< ADC channel for VINP3 to single positive input */ +#define LL_ADC_CHANNEL_VINP0_VINM0 (0x08UL) /*!< ADC channel for VINP0 - VINM0 to differential input */ +#define LL_ADC_CHANNEL_VINP1_VINM1 (0x09UL) /*!< ADC channel for VINP1 - VINM1 to differential input */ +#define LL_ADC_CHANNEL_VINP2_VINM2 (0x0AUL) /*!< ADC channel for VINP2 - VINM2 to differential input */ +#define LL_ADC_CHANNEL_VINP3_VINM3 (0x0BUL) /*!< ADC channel for VINP3 - VINM3 to differential input */ +#define LL_ADC_CHANNEL_VBAT (0x0CUL) /*!< ADC channel for VBAT, battery level detector */ +#define LL_ADC_CHANNEL_TEMPSENSOR (0x0DUL) /*!< ADC channel for temperature sensor */ + +/** + * @} + */ + +/** @defgroup ADC_LL_EC_REG_SEQ_RANKS ADC - Sequencer ranks + * @{ + */ +#define LL_ADC_RANK_1 (ADC_SEQ_1_REGOFFSET | ADC_RANK_1_SEQ_X_BITOFFSET_POS) /*!< ADC rank 1 */ +#define LL_ADC_RANK_2 (ADC_SEQ_1_REGOFFSET | ADC_RANK_2_SEQ_X_BITOFFSET_POS) /*!< ADC rank 2 */ +#define LL_ADC_RANK_3 (ADC_SEQ_1_REGOFFSET | ADC_RANK_3_SEQ_X_BITOFFSET_POS) /*!< ADC rank 3 */ +#define LL_ADC_RANK_4 (ADC_SEQ_1_REGOFFSET | ADC_RANK_4_SEQ_X_BITOFFSET_POS) /*!< ADC rank 4 */ +#define LL_ADC_RANK_5 (ADC_SEQ_1_REGOFFSET | ADC_RANK_5_SEQ_X_BITOFFSET_POS) /*!< ADC rank 5 */ +#define LL_ADC_RANK_6 (ADC_SEQ_1_REGOFFSET | ADC_RANK_6_SEQ_X_BITOFFSET_POS) /*!< ADC rank 6 */ +#define LL_ADC_RANK_7 (ADC_SEQ_1_REGOFFSET | ADC_RANK_7_SEQ_X_BITOFFSET_POS) /*!< ADC rank 7 */ +#define LL_ADC_RANK_8 (ADC_SEQ_1_REGOFFSET | ADC_RANK_8_SEQ_X_BITOFFSET_POS) /*!< ADC rank 8 */ +#define LL_ADC_RANK_9 (ADC_SEQ_2_REGOFFSET | ADC_RANK_9_SEQ_X_BITOFFSET_POS) /*!< ADC rank 9 */ +#define LL_ADC_RANK_10 (ADC_SEQ_2_REGOFFSET | ADC_RANK_10_SEQ_X_BITOFFSET_POS) /*!< ADC rank 10 */ +#define LL_ADC_RANK_11 (ADC_SEQ_2_REGOFFSET | ADC_RANK_11_SEQ_X_BITOFFSET_POS) /*!< ADC rank 11 */ +#define LL_ADC_RANK_12 (ADC_SEQ_2_REGOFFSET | ADC_RANK_12_SEQ_X_BITOFFSET_POS) /*!< ADC rank 12 */ +#define LL_ADC_RANK_13 (ADC_SEQ_2_REGOFFSET | ADC_RANK_13_SEQ_X_BITOFFSET_POS) /*!< ADC rank 13 */ +#define LL_ADC_RANK_14 (ADC_SEQ_2_REGOFFSET | ADC_RANK_14_SEQ_X_BITOFFSET_POS) /*!< ADC rank 14 */ +#define LL_ADC_RANK_15 (ADC_SEQ_2_REGOFFSET | ADC_RANK_15_SEQ_X_BITOFFSET_POS) /*!< ADC rank 15 */ +#define LL_ADC_RANK_16 (ADC_SEQ_2_REGOFFSET | ADC_RANK_16_SEQ_X_BITOFFSET_POS) /*!< ADC rank 16 */ +/** + * @} + */ + +/** @defgroup ADC_LL_CALIB_POINT ADC calibration points definitions + * @brief It defines the parameters used for the functions + * @ref LL_ADC_SetCalibPointForDiff(), @ref LL_ADC_GetCalibPointForDiff(), + * @ref LL_ADC_SetCalibPointForSinglePos(), @ref LL_ADC_GetCalibPointForSinglePos(), + * @ref LL_ADC_SetCalibPointForSingleNeg(), @ref LL_ADC_GetCalibPointForSingleNeg(), + * @{ + */ + +#define LL_ADC_CALIB_POINT_1 (0x00UL) /*!< ADC calibration point 1 */ +#define LL_ADC_CALIB_POINT_2 (0x01UL) /*!< ADC calibration point 2 */ +#define LL_ADC_CALIB_POINT_3 (0x02UL) /*!< ADC calibration point 3 */ +#define LL_ADC_CALIB_POINT_4 (0x03UL) /*!< ADC calibration point 4 */ + +/** + * @} + */ + +/** @defgroup ADC_LL_AWD_CHANNEL ADC watchdog channel selection for bit mask definitions + * @brief It defines the parameters used for the functions @ref LL_ADC_SetAWDInputChannels() + * and @ref LL_ADC_GetAWDInputChannels() + * @{ + */ + +#define LL_ADC_AWD_CH_VINM0 (ADC_WD_CONF_AWD_CHX_0 ) /*!< ADC watchdog channel selection: VINM0 to negative input */ +#define LL_ADC_AWD_CH_VINM1 (ADC_WD_CONF_AWD_CHX_1 ) /*!< ADC watchdog channel selection: VINM1 to negative input */ +#define LL_ADC_AWD_CH_VINM2 (ADC_WD_CONF_AWD_CHX_2 ) /*!< ADC watchdog channel selection: VINM2 to negative input */ +#define LL_ADC_AWD_CH_VINM3 (ADC_WD_CONF_AWD_CHX_3 ) /*!< ADC watchdog channel selection: VINM3 to negative input */ +#define LL_ADC_AWD_CH_VINP0 (ADC_WD_CONF_AWD_CHX_8 ) /*!< ADC watchdog channel selection: VINP0 to positive input */ +#define LL_ADC_AWD_CH_VINP1 (ADC_WD_CONF_AWD_CHX_9 ) /*!< ADC watchdog channel selection: VINP1 to positive input */ +#define LL_ADC_AWD_CH_VINP2 (ADC_WD_CONF_AWD_CHX_10) /*!< ADC watchdog channel selection: VINP2 to positive input */ +#define LL_ADC_AWD_CH_VINP3 (ADC_WD_CONF_AWD_CHX_11) /*!< ADC watchdog channel selection: VINP3 to positive input */ +#define LL_ADC_AWD_CH_MICROM (ADC_WD_CONF_AWD_CHX_4 ) /*!< ADC watchdog channel selection: MICROM to negative input */ +#define LL_ADC_AWD_CH_MICROP (ADC_WD_CONF_AWD_CHX_12) /*!< ADC watchdog channel selection: MICROP to positive input */ +#define LL_ADC_AWD_CH_VBAT (ADC_WD_CONF_AWD_CHX_5 ) /*!< ADC watchdog channel selection: VBAT to negative input */ +#define LL_ADC_AWD_CH_TEMPSENSOR (ADC_WD_CONF_AWD_CHX_13) /*!< ADC watchdog channel selection: TEMP to positive input */ +#define LL_ADC_AWD_CH_VDDA_NEG (ADC_WD_CONF_AWD_CHX_7 ) /*!< ADC watchdog channel selection: VDDA to negative input */ +#define LL_ADC_AWD_CH_VDDA_POS (ADC_WD_CONF_AWD_CHX_15) /*!< ADC watchdog channel selection: VDDA to positive input */ +#define LL_ADC_AWD_CH_GND_NEG (ADC_WD_CONF_AWD_CHX_6 ) /*!< ADC watchdog channel selection: GND to negative input */ +#define LL_ADC_AWD_CH_GND_POS (ADC_WD_CONF_AWD_CHX_14) /*!< ADC watchdog channel selection: GND to positive input */ + +/** + * @} + */ + + +/** @defgroup ADC_LL_IRQ_STATUS_MASK ADC IRQ_STATUS register mask definitions + * @brief It defines the IRQ flags used for the functions @ref LL_ADC_ClearActiveFlags() + * and @ref LL_ADC_GetActiveFlags(). + * @{ + */ +#define LL_ADC_IRQ_FLAG_OVRDS (ADC_IRQ_STATUS_OVR_DS_IRQ) /*!< ADC IRQ flag OVRDS */ +#define LL_ADC_IRQ_FLAG_AWD1 (ADC_IRQ_STATUS_AWD_IRQ) /*!< ADC IRQ flag AWD1 */ +#define LL_ADC_IRQ_FLAG_EOC (ADC_IRQ_STATUS_EOC_IRQ) /*!< ADC IRQ flag EOC */ +#define LL_ADC_IRQ_FLAG_EOS (ADC_IRQ_STATUS_EOS_IRQ) /*!< ADC IRQ flag EOS */ +#define LL_ADC_IRQ_FLAG_EODS (ADC_IRQ_STATUS_EODS_IRQ) /*!< ADC IRQ flag EODS */ + +#define LL_ADC_IRQ_FLAGS_MASK (LL_ADC_IRQ_FLAG_OVRDS | \ + LL_ADC_IRQ_FLAG_AWD1 | \ + LL_ADC_IRQ_FLAG_EOC | \ + LL_ADC_IRQ_FLAG_EOS | \ + LL_ADC_IRQ_FLAG_EODS) + +/** + * @} + */ + + +/** @defgroup ADC_LL_IRQ_ENABLE ADC interrupts enable definitions + * @brief It defines the IRQ interrupt enable used for the functions @ref LL_ADC_ClearActiveFlags() + * and @ref LL_ADC_GetActiveFlags(). + * @{ + */ + +#define LL_ADC_IRQ_EN_OVRDS (ADC_IRQ_ENABLE_OVR_DS_IRQ_ENA) /*!< ADC IRQ enable OVRDS */ +#define LL_ADC_IRQ_EN_AWD1 (ADC_IRQ_ENABLE_AWD_IRQ_ENA) /*!< ADC IRQ enable AWD1 */ +#define LL_ADC_IRQ_EN_EOC (ADC_IRQ_ENABLE_EOC_IRQ_ENA) /*!< ADC IRQ enable EOC */ +#define LL_ADC_IRQ_EN_EOS (ADC_IRQ_ENABLE_EOS_IRQ_ENA) /*!< ADC IRQ enable EOS */ +#define LL_ADC_IRQ_EN_EODS (ADC_IRQ_ENABLE_EODS_IRQ_ENA) /*!< ADC IRQ enable EODS */ + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Macros ADC Exported Macros + * @{ + */ + +/** @defgroup ADC_LL_EM_WRITE_READ Common write and read registers Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address + */ +#define __ADC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((__IO uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + +/** + * @} + */ + +/** @defgroup ADC_LL_EM_HELPER_MACRO ADC helper macro + * @{ + */ + +#define LL_ADC_TEMPERATURE_CALC_ERROR ((int16_t)0x7FFF) /* Temperature calculation error using helper macro + @ref __LL_ADC_CALC_TEMPERATURE(), due to issue on + calibration parameters. This value is coded on 16 bits + (to fit on signed word or double word) and corresponds + to an inconsistent temperature value. */ +/** + * @brief Helper macro to define the ADC conversion data full-scale digital + * value corresponding to the selected ADC resolution. + * @note ADC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __ADC_WIDTH__ This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_16_BIT + * @retval ADC conversion data full-scale digital value (unit: digital value of ADC conversion data) + */ +#define __LL_ADC_DIGITAL_SCALE(__ADC_WIDTH__) (0xFFFFUL >> ((LL_ADC_DS_DATA_WIDTH_16_BIT) - (__ADC_WIDTH__))) + +/** + * @brief Helper macro to define the ADC conversion data full-scale analog + * voltage value corresponding to the selected ADC input range. + * @param __INPUT_VOLTAGE_RANGE__ This parameter can be one of the following values: + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @retval ADC conversion data full-scale digital value (unit: digital value of ADC conversion data) + */ +#define __LL_ADC_REFERENCE_VOLTAGE(__INPUT_VOLTAGE_RANGE__) \ + (((__INPUT_VOLTAGE_RANGE__) == LL_ADC_VIN_RANGE_1V2) ? 1250UL : ((__INPUT_VOLTAGE_RANGE__) * 1200UL)) + +/** + * @brief Helper macro to determine whether the selected channel + * corresponds to literal definitions of driver. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_VINM0 + * @arg @ref LL_ADC_CHANNEL_VINM1 + * @arg @ref LL_ADC_CHANNEL_VINM2 + * @arg @ref LL_ADC_CHANNEL_VINM3 + * @arg @ref LL_ADC_CHANNEL_VINP0 + * @arg @ref LL_ADC_CHANNEL_VINP1 + * @arg @ref LL_ADC_CHANNEL_VINP2 + * @arg @ref LL_ADC_CHANNEL_VINP3 + * @arg @ref LL_ADC_CHANNEL_VINP0_VINM0 + * @arg @ref LL_ADC_CHANNEL_VINP1_VINM1 + * @arg @ref LL_ADC_CHANNEL_VINP2_VINM2 + * @arg @ref LL_ADC_CHANNEL_VINP3_VINM3 + * @arg @ref LL_ADC_CHANNEL_VBAT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @retval Value "0" if the channel corresponds to a parameter definition of a ADC external channel + * (channel connected to a GPIO pin). + * Value "1" if the channel corresponds to a parameter definition of a ADC internal channel. + */ +#define __LL_ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) ((__CHANNEL__) == (LL_ADC_CHANNEL_VBAT) \ + || (__CHANNEL__) == (LL_ADC_CHANNEL_TEMPSENSOR) \ + ) + +/** + * @brief Helper macro to convert the ADC conversion data from + * a resolution to another resolution. + * @param __DATA__ ADC conversion data to be converted + * @param __ADC_WIDTH_CURRENT__ Resolution of the data to be converted + * This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_16_BIT + * @param __ADC_WIDTH_TARGET__ Resolution of the data after conversion + * This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_16_BIT + * @retval ADC conversion data to the requested resolution + */ +#define __LL_ADC_CONVERT_DATA_RESOLUTION(__DATA__,\ + __ADC_WIDTH_CURRENT__,\ + __ADC_WIDTH_TARGET__) \ +(((__DATA__) \ + << ((LL_ADC_DS_DATA_WIDTH_16_BIT) - (__ADC_WIDTH_CURRENT__))) \ + >> ((LL_ADC_DS_DATA_WIDTH_16_BIT) - (__ADC_WIDTH_TARGET__)) \ +) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value). + * @param __INPUT_VOLTAGE_RANGE__ Analog reference voltage (unit: mV) + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @param __ADC_DATA__ ADC conversion data (unit: digital value). + * @param __ADC_WIDTH__ This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_16_BIT + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_ADC_CALC_DATA_TO_VOLTAGE(__INPUT_VOLTAGE_RANGE__,\ + __ADC_DATA__,\ + __ADC_WIDTH__) \ +((__ADC_DATA__) * (int32_t)(__LL_ADC_REFERENCE_VOLTAGE(__INPUT_VOLTAGE_RANGE__))\ + / (int32_t)(__LL_ADC_DIGITAL_SCALE(__ADC_WIDTH__)) \ +) + +/** + * @brief Helper macro to calculate the voltage (unit: mVolt) + * corresponding to a ADC conversion data (unit: digital value) in + * differential ended mode. + * @note ADC data from ADC data register is unsigned and centered around + * middle code in. Converted voltage can be positive or negative + * depending on differential input voltages. + * @param __INPUT_VOLTAGE_RANGE__ Analog reference voltage (unit: mV) + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @param __ADC_DATA__ ADC conversion data (unit: digital value). + * @param __ADC_WIDTH__ This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_16_BIT + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_ADC_CALC_DIFF_DATA_TO_VOLTAGE(__INPUT_VOLTAGE_RANGE__,\ + __ADC_DATA__,\ + __ADC_WIDTH__) \ +((int32_t)((__ADC_DATA__)) * (int32_t)(__LL_ADC_REFERENCE_VOLTAGE(__INPUT_VOLTAGE_RANGE__)) \ + / (int32_t)(__LL_ADC_DIGITAL_SCALE(__ADC_WIDTH__)) \ + - (int32_t)(__LL_ADC_REFERENCE_VOLTAGE(__INPUT_VOLTAGE_RANGE__) / 2 ) \ +) + + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor calibration values + * stored in system memory for each device during production. + * @note Calculation formula: + * Temperature = (55 / (C85 - C30)) * (TS_ADC_DATA - C30) + 30 + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * C85 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL1 (calibrated in factory) + * C30 = equivalent TS_ADC_DATA at temperature + * TEMP_DEGC_CAL2 (calibrated in factory) + * Caution: Calculation relevancy under reserve that calibration + * parameters are correct (address and data). + * To calculate temperature using temperature sensor + * datasheet typical values (generic values less, therefore + * less accurate than calibrated values), + * use helper macro @ref __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(). + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal + * temperature sensor (unit: digital value). + * @param __ADC_WIDTH__ This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_16_BIT + * @retval Temperature (unit: degree Celsius) + * In case or error, value LL_ADC_TEMPERATURE_CALC_ERROR is returned (inconsistent temperature value) + */ +#define __LL_ADC_CALC_TEMPERATURE(__TEMPSENSOR_ADC_DATA__,\ + __ADC_WIDTH__) \ +(((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__),(__ADC_WIDTH__), LL_ADC_DS_DATA_WIDTH_12_BIT) \ + - (int32_t)*TEMPSENSOR_C30_ADDR + (int32_t)*TEMPSENSOR_TCK_ADDR) \ + / (10UL)) \ +) + +/** + * @brief Helper macro to calculate the temperature (unit: degree Celsius) + * from ADC conversion data of internal temperature sensor. + * @note Computation is using temperature sensor typical values + * (refer to device datasheet). + * @note Calculation formula: + * Temperature = (Avg_Slope * (TS_ADC_DATA - VMIN) + TEMP_MIN + * + * with TS_ADC_DATA = temperature sensor raw data measured by ADC + * Avg_Slope = (TEMP_MAX - TEMP_MIN) / (VMAX - VMIN)) + * TEMP_MIN = maximal temperature range of the sensor (unit: degC) + * TEMP_MAX = maximal temperature range of the sensor (unit: degC) + * VMIN = temperature sensor digital value at TEMP_MIN (unit: mV) + * VMAX = temperature sensor digital value at TEMP_MAX (unit: mV) + * Caution: Calculation relevancy under reserve the temperature sensor + * of the current device has characteristics in line with + * datasheet typical values. + * If temperature sensor calibration values are available on + * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()), + * temperature calculation will be more accurate using + * helper macro @ref __LL_ADC_CALC_TEMPERATURE(). + * @param __TEMPSENSOR_ADC_DATA__ ADC conversion data of internal temperature sensor (unit: digital value). + * @param __ADC_WIDTH__ This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_DATA_WIDTH_12_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_16_BIT + * @retval Temperature (unit: degree Celsius) + */ +#define __LL_ADC_CALC_TEMPERATURE_TYP_PARAMS(__TEMPSENSOR_ADC_DATA__,\ + __ADC_WIDTH__) \ +(((__LL_ADC_CONVERT_DATA_RESOLUTION((__TEMPSENSOR_ADC_DATA__),(__ADC_WIDTH__), LL_ADC_DS_DATA_WIDTH_12_BIT) \ + - 2500 + 300) \ + / (10UL)) \ +) + +/** + * @brief Helper macro to convert the threshold value from mV to code for + * single conversion or battery sensor. + * @param __VOLTAGE_MV__ The voltage threshold for the ADC watchdog in mV. + * @param __INPUT_VOLTAGE_RANGE__ Analog reference voltage (unit: mV) + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @retval Returned 12-bit value to be used as ADC watchdog threshold. + */ +#define LL_ADC_CONVERT_VOLTAGE_TO_DATA_AWD_THRESHOLD_SINGLE(__VOLTAGE_MV__,\ + __INPUT_VOLTAGE_RANGE__) \ +((uint32_t)(((__VOLTAGE_MV__) * __LL_ADC_DIGITAL_SCALE(ADC_DS_DATA_WIDTH_12_BIT)) \ + / (__LL_ADC_REFERENCE_VOLTAGE(__INPUT_VOLTAGE_RANGE__)))) + +/** + * @brief Helper macro to convert the threshold value from mV to code for + * differential conversion. + * @param __VOLTAGE_MV__ The voltage threshold for the ADC watchdog in mV. + * @param __INPUT_VOLTAGE_RANGE__ Analog reference voltage (unit: mV) + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @retval Returned 12-bit value to be used as ADC watchdog threshold. + */ +#define LL_ADC_CONVERT_VOLTAGE_TO_DATA_AWD_THRESHOLD_DIFF(__VOLTAGE_MV__,\ + __INPUT_VOLTAGE_RANGE__) \ +((uint32_t)((((__VOLTAGE_MV__) * __LL_ADC_DIGITAL_SCALE(ADC_DS_DATA_WIDTH_12_BIT)) \ + / (2UL * __LL_ADC_REFERENCE_VOLTAGE(__INPUT_VOLTAGE_RANGE__))) \ + + (__LL_ADC_DIGITAL_SCALE(ADC_DS_DATA_WIDTH_12_BIT) / 2UL))) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup ADC_LL_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_LL_EF_Configuration_ADC ADC Configuration functions + * @{ + */ + +/** + * @brief Select the input sampling method. + * Sampling only at conversion start (default). + * Sampling starts at the end of conversion. + * @rmtoll CONF ADC_CONT_1V2 LL_ADC_SetInputSamplingMode + * @param ADCx ADC instance + * @param SamplingMode This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLING_AT_START + * @arg @ref LL_ADC_SAMPLING_AT_END + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetInputSamplingMode(ADC_TypeDef *ADCx, uint32_t SamplingMode) +{ + MODIFY_REG(ADCx->CONF, ADC_CONF_ADC_CONT_1V2, SamplingMode); +} + +/** + * @brief Get input sampling mode. + * @rmtoll CONF ADC_CONT_1V2 LL_ADC_GetInputSamplingMode + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLING_AT_START + * @arg @ref LL_ADC_SAMPLING_AT_END + */ +__STATIC_INLINE uint32_t LL_ADC_GetInputSamplingMode(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CONF, ADC_CONF_ADC_CONT_1V2)); +} + +/** + * @brief Enable the inversion of the ADC data output bits (1's complement) + * when a differential input is connected to the ADC + * @rmtoll CONF BIT_INVERT_DIFF LL_ADC_InvertOutputDiffModeEnable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_InvertOutputDiffModeEnable(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CONF, ADC_CONF_BIT_INVERT_DIFF); +} + +/** + * @brief Disable the inversion of the ADC data output bits (1's complement) + * when a differential input is connected to the ADC + * @rmtoll CONF BIT_INVERT_DIFF LL_ADC_InvertOutputDiffModeDisable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_InvertOutputDiffModeDisable(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CONF, ADC_CONF_BIT_INVERT_DIFF); +} + +/** + * @brief Check if the inversion of the ADC data output bits (1's complement) + * when a differential input is connected to the ADC is enabled. + * @rmtoll CONF BIT_INVERT_DIFF LL_ADC_IsInvertOutputDiffModeEnabled + * @param ADCx ADC instance + * @retval 0: inversion is not enabled, 1: inversion is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsInvertOutputDiffModeEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CONF, ADC_CONF_BIT_INVERT_DIFF) == (ADC_CONF_BIT_INVERT_DIFF)) ? 1UL : 0UL); +} + +/** + * @brief Enable the inversion of the ADC data output bits (1's complement) + * when a single negative input is connected to the ADC + * @rmtoll CONF BIT_INVERT_SN LL_ADC_InvertOutputSingleNegModeEnable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_InvertOutputSingleNegModeEnable(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CONF, ADC_CONF_BIT_INVERT_SN); +} + +/** + * @brief Disable the inversion of the ADC data output bits (1's complement) + * when a single negative input is connected to the ADC + * @rmtoll CONF BIT_INVERT_SN LL_ADC_InvertOutputSingleNegModeDisable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_InvertOutputSingleNegModeDisable(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CONF, ADC_CONF_BIT_INVERT_SN); +} + +/** + * @brief Check if the inversion of the ADC data output bits (1's complement) + * when a single negative input is connected to the ADC is enabled. + * @rmtoll CONF BIT_INVERT_SN LL_ADC_IsInvertOutputSingleNegModeEnabled + * @param ADCx ADC instance + * @retval 0: inversion is not enabled, 1: inversion is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsInvertOutputSingleNegModeEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CONF, ADC_CONF_BIT_INVERT_SN) == (ADC_CONF_BIT_INVERT_SN)) ? 1UL : 0UL); +} + +/** + * @brief Select the overrun configuration for the output data of + * the Down Sampler (DS). + * Previous data is kept, the new one is lost. + * Previous data is lost, the new one is kept. + * @rmtoll CONF OVR_DS_CFG LL_ADC_SetOverrunDS + * @param ADCx ADC instance + * @param Overrun This parameter can be one of the following values: + * @arg @ref LL_ADC_NEW_DATA_IS_LOST + * @arg @ref LL_ADC_NEW_DATA_IS_KEPT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetOverrunDS(ADC_TypeDef *ADCx, uint32_t Overrun) +{ + MODIFY_REG(ADCx->CONF, ADC_CONF_OVR_DS_CFG, Overrun); +} + +/** + * @brief Get the overrun configuration for the output data of + * the Down Sampler (DS). + * Previous data is kept, the new one is lost. + * Previous data is lost, the new one is kept. + * @rmtoll CONF OVR_DS_CFG LL_ADC_GetOverrunDS + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_NEW_DATA_IS_LOST + * @arg @ref LL_ADC_NEW_DATA_IS_KEPT + */ +__STATIC_INLINE uint32_t LL_ADC_GetOverrunDS(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CONF, ADC_CONF_OVR_DS_CFG)); +} + +/** + * @brief Enable the DMA mode for the Down Sampler (DS) data path. + * @rmtoll CONF DMA_DS_ENA LL_ADC_DMAModeDSEnable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DMAModeDSEnable(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CONF, ADC_CONF_DMA_DS_ENA); +} + + +/** + * @brief Disable the DMA mode for the Down Sampler (DS) data path. + * @rmtoll CONF DMA_DS_ENA LL_ADC_DMAModeDSDisable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DMAModeDSDisable(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CONF, ADC_CONF_DMA_DS_ENA); +} + + +/** + * @brief Check if the DMA mode for the Down Sampler (DS) data path is enabled. + * @rmtoll CONF DMA_DS_ENA LL_ADC_IsDMAModeDSEnabled + * @param ADCx ADC instance + * @retval 0: DMA mode is not enabled, 1: DMA mode is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsDMAModeDSEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CONF, ADC_CONF_DMA_DS_ENA) == (ADC_CONF_DMA_DS_ENA)) ? 1UL : 0UL); +} + +/** + * @brief Select the ADC conversion rate. + * @rmtoll CONF SAMPLE_RATE LL_ADC_SetSampleRate + * @param ADCx ADC instance + * @param SampleRate This parameter can be one of the following values: + * @arg @ref LL_ADC_SAMPLE_RATE_16 + * @arg @ref LL_ADC_SAMPLE_RATE_20 + * @arg @ref LL_ADC_SAMPLE_RATE_24 + * @arg @ref LL_ADC_SAMPLE_RATE_28 + * @arg @ref LL_ADC_SAMPLE_RATE_32 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_36 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_40 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_44 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_48 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_52 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_56 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_60 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_64 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_68 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_72 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_76 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_80 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_84 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_88 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_92 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_96 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_100 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_104 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_108 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_112 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_116 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_120 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_124 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_128 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_132 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_136 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_140 (1) + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetSampleRate(ADC_TypeDef *ADCx, uint32_t SampleRate) +{ + MODIFY_REG(ADCx->CONF, ADC_CONF_SAMPLE_RATE | ADC_CONF_SAMPLE_RATE_MSB, SampleRate); +} + + +/** + * @brief Get the ADC conversion rate. + * @rmtoll CONF SAMPLE_RATE LL_ADC_GetSampleRate + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_SAMPLE_RATE_16 + * @arg @ref LL_ADC_SAMPLE_RATE_20 + * @arg @ref LL_ADC_SAMPLE_RATE_24 + * @arg @ref LL_ADC_SAMPLE_RATE_28 + * @arg @ref LL_ADC_SAMPLE_RATE_32 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_36 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_40 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_44 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_48 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_52 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_56 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_60 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_64 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_68 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_72 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_76 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_80 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_84 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_88 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_92 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_96 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_100 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_104 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_108 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_112 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_116 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_120 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_124 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_128 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_132 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_136 (1) + * @arg @ref LL_ADC_SAMPLE_RATE_140 (1) + */ +__STATIC_INLINE uint32_t LL_ADC_GetSampleRate(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CONF, ADC_CONF_SAMPLE_RATE | ADC_CONF_SAMPLE_RATE_MSB)); +} + + +/** + * @brief Enable the synchronization of the ADC start conversion with + * a pulse generated by the SMPS. + * @note This bitfield must be 0 when the ADC clock is 32 MHz or + * when the SMPS is not used. + * @rmtoll CONF SMPS_SYNCHRO_ENA LL_ADC_SMPSSyncEnable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_SMPSSyncEnable(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CONF, ADC_CONF_SMPS_SYNCHRO_ENA); +} + +/** + * @brief Disable the synchronization of the ADC start conversion with + * a pulse generated by the SMPS. + * @note This bitfield must be 0 when the ADC clock is 32 MHz or + * when the SMPS is not used. + * @rmtoll CONF SMPS_SYNCHRO_ENA LL_ADC_SMPSSyncDisable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_SMPSSyncDisable(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CONF, ADC_CONF_SMPS_SYNCHRO_ENA); +} + + +/** + * @brief Check if the the synchronization of the ADC start conversion with + * a pulse generated by the SMPS is enabled. + * @note This bitfield must be 0 when the ADC clock is 32 MHz or + * when the SMPS is not used. + * @rmtoll CONF SMPS_SYNCHRO_ENA LL_ADC_IsSMPSSyncEnabled + * @param ADCx ADC instance + * @retval 0: Synchronization with SMPS is not enabled, 1: Synchronization with SMPS is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsSMPSSyncEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CONF, ADC_CONF_SMPS_SYNCHRO_ENA) == (ADC_CONF_SMPS_SYNCHRO_ENA)) ? 1UL : 0UL); +} + + +/** + * @brief Set the number of conversion in a sequence starting from SEQ0. + * @rmtoll CONF SEQ_LEN LL_ADC_SetSequenceLength + * @param ADCx ADC instance + * @param SequenceLength This parameter must be a number between Min_Data = 1 and Max_Data = 16. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetSequenceLength(ADC_TypeDef *ADCx, uint32_t SequenceLength) +{ + MODIFY_REG(ADCx->CONF, ADC_CONF_SEQ_LEN, (SequenceLength - 1UL) << ADC_CONF_SEQ_LEN_Pos); +} + + +/** + * @brief Get the number of conversion in a sequence starting from SEQ0. + * @rmtoll CONF SEQ_LEN LL_ADC_GetSequenceLength + * @param ADCx ADC instance + * @retval Returned value is a number between Min_Data = 1 and Max_Data = 16. + */ +__STATIC_INLINE uint32_t LL_ADC_GetSequenceLength(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->CONF, ADC_CONF_SEQ_LEN) >> ADC_CONF_SEQ_LEN_Pos) + 1UL; +} + + +/** + * @brief Enable the ADC conversion in sequence mode. + * @rmtoll CONF SEQUENCE LL_ADC_SequenceModeEnable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_SequenceModeEnable(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CONF, ADC_CONF_SEQUENCE); +} + + +/** + * @brief Disable the ADC conversion in sequence mode. + * @rmtoll CONF SEQUENCE LL_ADC_SequenceModeDisable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_SequenceModeDisable(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CONF, ADC_CONF_SEQUENCE); +} + + +/** + * @brief Check if the ADC conversion in sequence mode is enabled. + * @rmtoll CONF SEQUENCE LL_ADC_IsSequenceModeEnabled + * @param ADCx ADC instance + * @retval 0: Sequence mode is not enabled, 1: Sequence mode is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsSequenceModeEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CONF, ADC_CONF_SEQUENCE) == (ADC_CONF_SEQUENCE)) ? 1UL : 0UL); +} + + +/** + * @brief Enable the ADC continuous conversion mode. + * When a sequence is over, the conversion starts again. + * @note Stop the conversion can be made by sets the STOP_OP_MODE bit. + * Call the API @ref LL_ADC_StopConversion(). + * @rmtoll CONF CONT LL_ADC_ContinuousModeEnable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ContinuousModeEnable(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CONF, ADC_CONF_CONT); +} + + +/** + * @brief Disable the ADC continuous conversion mode. + * When a sequence is over, the conversion stops (single conversion mode). + * @rmtoll CONF CONT LL_ADC_ContinuousModeDisable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ContinuousModeDisable(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CONF, ADC_CONF_CONT); +} + + +/** + * @brief Check if the ADC continuous conversion mode is enabled. + * @rmtoll CONF CONT LL_ADC_IsContinuousModeEnabled + * @param ADCx ADC instance + * @retval 0: Continuous mode is not enabled, 1: Continuous mode is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsContinuousModeEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CONF, ADC_CONF_CONT) == (ADC_CONF_CONT)) ? 1UL : 0UL); +} + +/** + * @} + */ + + +/** @defgroup ADC_LL_EF_Control_ADC ADC Control functions + * @{ + */ + +/** + * @brief Stop the ongoing ADC conversion. + * @note This bit is set by software and cleared by hardware. + * @note When the STOP_MODE_OP is set, the user has to wait around 10 us before + * to start a new ADC conversion (set START_CONV bit). + * @rmtoll CTRL STOP_OP_MODE LL_ADC_StopConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_StopConversion(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CTRL, ADC_CTRL_STOP_OP_MODE); +} + + +/** + * @brief Check if the stop conversion is ongoing. + * @rmtoll CTRL STOP_OP_MODE LL_ADC_IsStopConversionOngoing + * @param ADCx ADC instance + * @retval 0: stop conversion is not ongoing, 1: stop conversion is ongoing. + */ +__STATIC_INLINE uint32_t LL_ADC_IsStopConversionOngoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CTRL, ADC_CTRL_STOP_OP_MODE) == (ADC_CTRL_STOP_OP_MODE)) ? 1UL : 0UL); +} + + +/** + * @brief Start an ADC conversion. + * @note This bit is set by software and cleared by hardware. + * @rmtoll CTRL START_CONV LL_ADC_StartConversion + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_StartConversion(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CTRL, ADC_CTRL_START_CONV); +} + + +/** + * @brief Check if the ADC conversion is ongoing. + * @rmtoll CTRL ADC_ON_OFF LL_ADC_IsConversionOngoing + * @param ADCx ADC instance + * @retval 0: ADC conversion is not ongoing, 1: ADC conversion is ongoing. + */ +__STATIC_INLINE uint32_t LL_ADC_IsConversionOngoing(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CTRL, ADC_CTRL_ADC_ON_OFF) == (ADC_CTRL_ADC_ON_OFF)) ? 1UL : 0UL); +} + + +/** + * @brief Power on the ADC. + * @rmtoll CTRL ADC_ON_OFF LL_ADC_Enable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Enable(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->CTRL, ADC_CTRL_ADC_ON_OFF); +} + + +/** + * @brief Power off the ADC. + * @rmtoll CTRL ADC_ON_OFF LL_ADC_Disable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_Disable(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->CTRL, ADC_CTRL_ADC_ON_OFF); +} + + +/** + * @brief Check if the ADC is on. + * @rmtoll CTRL ADC_ON_OFF LL_ADC_IsEnabled + * @param ADCx ADC instance + * @retval 0: ADC is off, 1: ADC is on. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabled(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->CTRL, ADC_CTRL_ADC_ON_OFF) == (ADC_CTRL_ADC_ON_OFF)) ? 1UL : 0UL); +} + + +/** + * @} + */ + + +/** @defgroup ADC_LL_EF_PGA_Configuration ADC PGA Configuration functions + * @{ + */ + + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_Input_Switch_Selection ADC Input Switch Selection functions + * @{ + */ + +/** + * @brief Set the input voltage range for selected channel. + * @rmtoll SWITCH SE_VIN_0 LL_ADC_SetChannelVoltageRange\n + * SWITCH SE_VIN_1 LL_ADC_SetChannelVoltageRange\n + * SWITCH SE_VIN_2 LL_ADC_SetChannelVoltageRange\n + * SWITCH SE_VIN_3 LL_ADC_SetChannelVoltageRange\n + * SWITCH SE_VIN_4 LL_ADC_SetChannelVoltageRange\n + * SWITCH SE_VIN_5 LL_ADC_SetChannelVoltageRange\n + * SWITCH SE_VIN_6 LL_ADC_SetChannelVoltageRange\n + * SWITCH SE_VIN_7 LL_ADC_SetChannelVoltageRange + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_VINM0 + * @arg @ref LL_ADC_CHANNEL_VINM1 + * @arg @ref LL_ADC_CHANNEL_VINM2 + * @arg @ref LL_ADC_CHANNEL_VINM3 + * @arg @ref LL_ADC_CHANNEL_VINP0 + * @arg @ref LL_ADC_CHANNEL_VINP1 + * @arg @ref LL_ADC_CHANNEL_VINP2 + * @arg @ref LL_ADC_CHANNEL_VINP3 + * @arg @ref LL_ADC_CHANNEL_VINP0_VINM0 + * @arg @ref LL_ADC_CHANNEL_VINP1_VINM1 + * @arg @ref LL_ADC_CHANNEL_VINP2_VINM2 + * @arg @ref LL_ADC_CHANNEL_VINP3_VINM3 + * @param Range This parameter can be one of the following values: + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetChannelVoltageRange(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t Range) +{ + MODIFY_REG(ADCx->SWITCH, (ADC_SWITCH_SE_VIN_0 << ADC_CHANNEL_SWITCH_POS_LUT[Channel]), + (Range << ADC_CHANNEL_SWITCH_POS_LUT[Channel])); +} + +/** + * @brief Get the input voltage range for selected channel. + * @rmtoll SWITCH SE_VIN_0 LL_ADC_GetChannelVoltageRange + * SWITCH SE_VIN_1 LL_ADC_GetChannelVoltageRange\n + * SWITCH SE_VIN_2 LL_ADC_GetChannelVoltageRange\n + * SWITCH SE_VIN_3 LL_ADC_GetChannelVoltageRange\n + * SWITCH SE_VIN_4 LL_ADC_GetChannelVoltageRange\n + * SWITCH SE_VIN_5 LL_ADC_GetChannelVoltageRange\n + * SWITCH SE_VIN_6 LL_ADC_GetChannelVoltageRange\n + * SWITCH SE_VIN_7 LL_ADC_GetChannelVoltageRange + * @param ADCx ADC instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_VINM0 + * @arg @ref LL_ADC_CHANNEL_VINM1 + * @arg @ref LL_ADC_CHANNEL_VINM2 + * @arg @ref LL_ADC_CHANNEL_VINM3 + * @arg @ref LL_ADC_CHANNEL_VINP0 + * @arg @ref LL_ADC_CHANNEL_VINP1 + * @arg @ref LL_ADC_CHANNEL_VINP2 + * @arg @ref LL_ADC_CHANNEL_VINP3 + * @arg @ref LL_ADC_CHANNEL_VINP0_VINM0 + * @arg @ref LL_ADC_CHANNEL_VINP1_VINM1 + * @arg @ref LL_ADC_CHANNEL_VINP2_VINM2 + * @arg @ref LL_ADC_CHANNEL_VINP3_VINM3 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_3V6 + */ +__STATIC_INLINE uint32_t LL_ADC_GetChannelVoltageRange(const ADC_TypeDef *ADCx, uint32_t Channel) +{ + return ((uint32_t)(READ_BIT(ADCx->SWITCH, ADC_SWITCH_SE_VIN_0 << ADC_CHANNEL_SWITCH_POS_LUT[Channel])) + >> ADC_CHANNEL_SWITCH_POS_LUT[Channel]); +} + +/** + * @} + */ + + +/** @defgroup ADC_LL_EF_DS_Configuration ADC Down Sampler Configuration functions + * @{ + */ + +/** + * @brief Configure the width (in bit) and the ratio of the output data from the Down Sampler. + * @param ADCx ADC instance + * @param Width This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_DATA_WIDTH_12_BIT (default) + * @arg @ref LL_ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_16_BIT + * @param Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_RATIO_1 (no down sampling, default) + * @arg @ref LL_ADC_DS_RATIO_2 + * @arg @ref LL_ADC_DS_RATIO_4 + * @arg @ref LL_ADC_DS_RATIO_8 + * @arg @ref LL_ADC_DS_RATIO_16 + * @arg @ref LL_ADC_DS_RATIO_32 + * @arg @ref LL_ADC_DS_RATIO_64 + * @arg @ref LL_ADC_DS_RATIO_128 + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigureDSDataOutput(ADC_TypeDef *ADCx, uint32_t Width, uint32_t Ratio) +{ + MODIFY_REG(ADCx->DS_CONF, (ADC_DS_CONF_DS_WIDTH | ADC_DS_CONF_DS_RATIO), + ((Width << ADC_DS_CONF_DS_WIDTH_Pos) | Ratio)); +} + +/** + * @brief Set the width (in bit) of the output data from the Down Sampler. + * @rmtoll DS_CONF DS_WIDTH LL_ADC_SetDSDataOutputWidth + * @param ADCx ADC instance + * @param Width This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_DATA_WIDTH_12_BIT (default) + * @arg @ref LL_ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_16_BIT + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetDSDataOutputWidth(ADC_TypeDef *ADCx, uint32_t Width) +{ + MODIFY_REG(ADCx->DS_CONF, ADC_DS_CONF_DS_WIDTH, (Width << ADC_DS_CONF_DS_WIDTH_Pos)); +} + + +/** + * @brief Get the width (in bit) of the output data from the Down Sampler (DS). + * @rmtoll DS_CONF DS_WIDTH LL_ADC_GetDSDataOutputWidth + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_DS_DATA_WIDTH_12_BIT (default) + * @arg @ref LL_ADC_DS_DATA_WIDTH_13_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_14_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_15_BIT + * @arg @ref LL_ADC_DS_DATA_WIDTH_16_BIT + */ +__STATIC_INLINE uint32_t LL_ADC_GetDSDataOutputWidth(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->DS_CONF, ADC_DS_CONF_DS_WIDTH) >> ADC_DS_CONF_DS_WIDTH_Pos); +} + + +/** + * @brief Set the ratio of the Down Sampler (DS). + * @rmtoll DS_CONF DS_RATIO LL_ADC_SetDSDataOutputRatio + * @param ADCx ADC instance + * @param Ratio This parameter can be one of the following values: + * @arg @ref LL_ADC_DS_RATIO_1 (no down sampling, default) + * @arg @ref LL_ADC_DS_RATIO_2 + * @arg @ref LL_ADC_DS_RATIO_4 + * @arg @ref LL_ADC_DS_RATIO_8 + * @arg @ref LL_ADC_DS_RATIO_16 + * @arg @ref LL_ADC_DS_RATIO_32 + * @arg @ref LL_ADC_DS_RATIO_64 + * @arg @ref LL_ADC_DS_RATIO_128 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetDSDataOutputRatio(ADC_TypeDef *ADCx, uint32_t Ratio) +{ + MODIFY_REG(ADCx->DS_CONF, ADC_DS_CONF_DS_RATIO, Ratio); +} + + +/** + * @brief Get the ratio of the Down Sampler (DS). + * @rmtoll DS_CONF DS_RATIO LL_ADC_GetDSDataOutputRatio + * @param ADCx ADC instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_DS_RATIO_1 (no down sampling, default) + * @arg @ref LL_ADC_DS_RATIO_2 + * @arg @ref LL_ADC_DS_RATIO_4 + * @arg @ref LL_ADC_DS_RATIO_8 + * @arg @ref LL_ADC_DS_RATIO_16 + * @arg @ref LL_ADC_DS_RATIO_32 + * @arg @ref LL_ADC_DS_RATIO_64 + * @arg @ref LL_ADC_DS_RATIO_128 + */ +__STATIC_INLINE uint32_t LL_ADC_GetDSDataOutputRatio(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->DS_CONF, ADC_DS_CONF_DS_RATIO)); +} + +/** + * @} + */ + + +/** @defgroup ADC_LL_EF_Sequence_Configuration ADC Sequence Configuration functions + * @{ + */ + +/** + * @brief Set ADC sequence: channel on the selected + * scan sequence rank. + * @note This function performs configuration of: + * - Channels ordering into each rank of scan sequence: + * whatever channel can be placed into whatever rank. + * @note On this STM32 series, ADCsequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @rmtoll SEQ_1 SEQ1 LL_ADC_SetSequencerRanks\n + * SEQ_1 SEQ1 LL_ADC_SetSequencerRanks\n + * SEQ_1 SEQ2 LL_ADC_SetSequencerRanks\n + * SEQ_1 SEQ3 LL_ADC_SetSequencerRanks\n + * SEQ_1 SEQ4 LL_ADC_SetSequencerRanks\n + * SEQ_1 SEQ5 LL_ADC_SetSequencerRanks\n + * SEQ_1 SEQ6 LL_ADC_SetSequencerRanks\n + * SEQ_1 SEQ7 LL_ADC_SetSequencerRanks\n + * SEQ_2 SEQ8 LL_ADC_SetSequencerRanks\n + * SEQ_2 SEQ9 LL_ADC_SetSequencerRanks\n + * SEQ_2 SEQ10 LL_ADC_SetSequencerRanks\n + * SEQ_2 SEQ11 LL_ADC_SetSequencerRanks\n + * SEQ_2 SEQ12 LL_ADC_SetSequencerRanks\n + * SEQ_2 SEQ13 LL_ADC_SetSequencerRanks\n + * SEQ_2 SEQ14 LL_ADC_SetSequencerRanks\n + * SEQ_2 SEQ15 LL_ADC_SetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_RANK_1 + * @arg @ref LL_ADC_RANK_2 + * @arg @ref LL_ADC_RANK_3 + * @arg @ref LL_ADC_RANK_4 + * @arg @ref LL_ADC_RANK_5 + * @arg @ref LL_ADC_RANK_6 + * @arg @ref LL_ADC_RANK_7 + * @arg @ref LL_ADC_RANK_8 + * @arg @ref LL_ADC_RANK_9 + * @arg @ref LL_ADC_RANK_10 + * @arg @ref LL_ADC_RANK_11 + * @arg @ref LL_ADC_RANK_12 + * @arg @ref LL_ADC_RANK_13 + * @arg @ref LL_ADC_RANK_14 + * @arg @ref LL_ADC_RANK_15 + * @arg @ref LL_ADC_RANK_16 + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_VINM0 + * @arg @ref LL_ADC_CHANNEL_VINM1 + * @arg @ref LL_ADC_CHANNEL_VINM2 + * @arg @ref LL_ADC_CHANNEL_VINM3 + * @arg @ref LL_ADC_CHANNEL_VINP0 + * @arg @ref LL_ADC_CHANNEL_VINP1 + * @arg @ref LL_ADC_CHANNEL_VINP2 + * @arg @ref LL_ADC_CHANNEL_VINP3 + * @arg @ref LL_ADC_CHANNEL_VINP0_VINM0 + * @arg @ref LL_ADC_CHANNEL_VINP1_VINM1 + * @arg @ref LL_ADC_CHANNEL_VINP2_VINM2 + * @arg @ref LL_ADC_CHANNEL_VINP3_VINM3 + * @arg @ref LL_ADC_CHANNEL_VBAT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetSequencerRanks(ADC_TypeDef *ADCx, uint32_t Rank, uint32_t Channel) +{ + /* Set bits with content of parameter "Channel" with bits position */ + /* in register and register position depending on parameter "Rank". */ + /* Parameters "Rank" and "Channel" are used with masks because containing */ + /* other bits reserved for other purpose. */ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SEQ_1, + ((Rank & ADC_SEQ_X_REGOFFSET_MASK) >> ADC_SEQ_X_REGOFFSET_POS)); + + MODIFY_REG(*preg, + ADC_SEQ_1_SEQ0 << (Rank & ADC_RANK_ID_SEQ_X_MASK), + (Channel) << (Rank & ADC_RANK_ID_SEQ_X_MASK)); +} + + +/** + * @brief Get ADC sequence: channel on the selected + * scan sequence rank. + * @note On this STM32 series, ADC sequencer is + * fully configurable: sequencer length and each rank + * affectation to a channel are configurable. + * Refer to description of function @ref LL_ADC_SetSequencerLength(). + * @note Depending on devices and packages, some channels may not be available. + * Refer to device datasheet for channels availability. + * @rmtoll SEQ_1 SEQ0 LL_ADC_GetSequencerRanks\n + * SEQ_1 SEQ1 LL_ADC_GetSequencerRanks\n + * SEQ_1 SEQ2 LL_ADC_GetSequencerRanks\n + * SEQ_1 SEQ3 LL_ADC_GetSequencerRanks\n + * SEQ_1 SEQ4 LL_ADC_GetSequencerRanks\n + * SEQ_1 SEQ5 LL_ADC_GetSequencerRanks\n + * SEQ_1 SEQ6 LL_ADC_GetSequencerRanks\n + * SEQ_1 SEQ7 LL_ADC_GetSequencerRanks\n + * SEQ_2 SEQ8 LL_ADC_GetSequencerRanks\n + * SEQ_2 SEQ9 LL_ADC_GetSequencerRanks\n + * SEQ_2 SEQ10 LL_ADC_GetSequencerRanks\n + * SEQ_2 SEQ11 LL_ADC_GetSequencerRanks\n + * SEQ_2 SEQ12 LL_ADC_GetSequencerRanks\n + * SEQ_2 SEQ13 LL_ADC_GetSequencerRanks\n + * SEQ_2 SEQ14 LL_ADC_GetSequencerRanks\n + * SEQ_2 SEQ15 LL_ADC_GetSequencerRanks + * @param ADCx ADC instance + * @param Rank This parameter can be one of the following values: + * @arg @ref LL_ADC_RANK_1 + * @arg @ref LL_ADC_RANK_2 + * @arg @ref LL_ADC_RANK_3 + * @arg @ref LL_ADC_RANK_4 + * @arg @ref LL_ADC_RANK_5 + * @arg @ref LL_ADC_RANK_6 + * @arg @ref LL_ADC_RANK_7 + * @arg @ref LL_ADC_RANK_8 + * @arg @ref LL_ADC_RANK_9 + * @arg @ref LL_ADC_RANK_10 + * @arg @ref LL_ADC_RANK_11 + * @arg @ref LL_ADC_RANK_12 + * @arg @ref LL_ADC_RANK_13 + * @arg @ref LL_ADC_RANK_14 + * @arg @ref LL_ADC_RANK_15 + * @arg @ref LL_ADC_RANK_16 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CHANNEL_VINM0 + * @arg @ref LL_ADC_CHANNEL_VINM1 + * @arg @ref LL_ADC_CHANNEL_VINM2 + * @arg @ref LL_ADC_CHANNEL_VINM3 + * @arg @ref LL_ADC_CHANNEL_VINP0 + * @arg @ref LL_ADC_CHANNEL_VINP1 + * @arg @ref LL_ADC_CHANNEL_VINP2 + * @arg @ref LL_ADC_CHANNEL_VINP3 + * @arg @ref LL_ADC_CHANNEL_VINP0_VINM0 + * @arg @ref LL_ADC_CHANNEL_VINP1_VINM1 + * @arg @ref LL_ADC_CHANNEL_VINP2_VINM2 + * @arg @ref LL_ADC_CHANNEL_VINP3_VINM3 + * @arg @ref LL_ADC_CHANNEL_VBAT + * @arg @ref LL_ADC_CHANNEL_TEMPSENSOR + */ +__STATIC_INLINE uint32_t LL_ADC_GetSequencerRanks(const ADC_TypeDef *ADCx, uint32_t Rank) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->SEQ_1, + ((Rank & ADC_SEQ_X_REGOFFSET_MASK) >> ADC_SEQ_X_REGOFFSET_POS)); + + return (uint32_t)((READ_BIT(*preg, + ADC_SEQ_1_SEQ0 << (Rank & ADC_RANK_ID_SEQ_X_MASK)) + >> (Rank & ADC_RANK_ID_SEQ_X_MASK)) + ); +} + +/** + * @} + */ + + +/** @defgroup ADC_LL_EF_Calibration_Points_Configuration ADC Calibration Points Configuration functions + * @{ + */ + +/** + * @brief Configure the gain and the offset of the calibration point 1. + * @param ADCx ADC instance + * @param Gain the gain of the first calibration point. + * @param Offset the signed offset of the first calibration point. + * @param Point This parameter can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigureCalibPoint(ADC_TypeDef *ADCx, uint32_t Point, uint32_t Gain, uint32_t Offset) +{ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->COMP_1, Point); + + MODIFY_REG(*preg, (ADC_COMP_1_GAIN1 | ADC_COMP_1_OFFSET1), + ((Gain & ADC_COMP_1_GAIN1) | ((Offset << ADC_COMP_1_OFFSET1_Pos) & ADC_COMP_1_OFFSET1))); +} + +/** + * @brief Set the gain of the calibration point 1. + * @rmtoll COMP_1 GAIN1 LL_ADC_SetCalibPointGain + * @param ADCx ADC instance + * @param Gain the gain of the first calibration point. + * @param Point This parameter can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibPointGain(ADC_TypeDef *ADCx, uint32_t Point, uint32_t Gain) +{ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->COMP_1, Point); + + MODIFY_REG(*preg, ADC_COMP_1_GAIN1, Gain); +} + + +/** + * @brief Get the gain of the calibration point 1. + * @rmtoll COMP_1 GAIN1 LL_ADC_GetCalibPointGain + * @param ADCx ADC instance + * @param Point This parameter can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + * @retval Return the gain of the first calibration point. + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibPointGain(const ADC_TypeDef *ADCx, uint32_t Point) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->COMP_1, Point); + + return (uint32_t)(READ_BIT(*preg, ADC_COMP_1_GAIN1)); +} + + +/** + * @brief Set the offset of the calibration point 1. + * @rmtoll COMP_1 OFFSET1 LL_ADC_SetCalibPointOffset + * @param ADCx ADC instance + * @param Offset the signed offset of the first calibration point. + * @param Point This parameter can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibPointOffset(ADC_TypeDef *ADCx, uint32_t Point, uint8_t Offset) +{ + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->COMP_1, Point); + + MODIFY_REG(*preg, ADC_COMP_1_OFFSET1, (Offset << ADC_COMP_1_OFFSET1_Pos)); +} + + +/** + * @brief Get the offset of the calibration point 1. + * @rmtoll COMP_1 OFFSET1 LL_ADC_GetCalibPointOffset + * @param ADCx ADC instance + * @param Point This parameter can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + * @retval Return the signed offset of the first calibration point. + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibPointOffset(const ADC_TypeDef *ADCx, uint32_t Point) +{ + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->COMP_1, Point); + + return (uint32_t)(READ_BIT(*preg, ADC_COMP_1_OFFSET1) >> ADC_COMP_1_OFFSET1_Pos); +} + +/** + * @brief Set the use of a specific calibration point for ADC differential mode + * @rmtoll COMP_SEL ADC_COMP_SEL_OFFSET_GAIN8 LL_ADC_SetCalibPointForDiff + * @param ADCx ADC instance + * @param Point This parameter can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + * @param Range This parameter can be one of the following values: + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibPointForDiff(ADC_TypeDef *ADCx, uint32_t Point, uint32_t Range) +{ + if (Range == LL_ADC_VIN_RANGE_1V2) + { + MODIFY_REG(ADCx->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN2 << ADC_COMP_SEL_OFFSET_GAIN0_Pos), + (Point << (ADC_COMP_SEL_OFFSET_GAIN2_Pos + ADC_COMP_SEL_OFFSET_GAIN0_Pos))); + } + else if (Range == LL_ADC_VIN_RANGE_2V4) + { + MODIFY_REG(ADCx->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN2 << ADC_COMP_SEL_OFFSET_GAIN3_Pos), + (Point << (ADC_COMP_SEL_OFFSET_GAIN2_Pos + ADC_COMP_SEL_OFFSET_GAIN3_Pos))); + } + else + { + MODIFY_REG(ADCx->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN2 << ADC_COMP_SEL_OFFSET_GAIN6_Pos), + (Point << (ADC_COMP_SEL_OFFSET_GAIN2_Pos + ADC_COMP_SEL_OFFSET_GAIN6_Pos))); + } +} + + +/** + * @brief Get what calibration point is used for ADC differential mode. + * @rmtoll COMP_SEL ADC_COMP_SEL_OFFSET_GAIN8 LL_ADC_GetCalibPointForDiff + * @param ADCx ADC instance + * @param Range This parameter can be one of the following values: + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibPointForDiff(const ADC_TypeDef *ADCx, uint32_t Range) +{ + if (Range == LL_ADC_VIN_RANGE_1V2) + { + return ((uint32_t)(READ_BIT(ADCx->COMP_SEL, ADC_COMP_SEL_OFFSET_GAIN2) + >> ADC_COMP_SEL_OFFSET_GAIN2_Pos)); + } + else if (Range == LL_ADC_VIN_RANGE_2V4) + { + return ((uint32_t)(READ_BIT(ADCx->COMP_SEL, ADC_COMP_SEL_OFFSET_GAIN2 << ADC_COMP_SEL_OFFSET_GAIN3_Pos) + >> (ADC_COMP_SEL_OFFSET_GAIN2_Pos + ADC_COMP_SEL_OFFSET_GAIN3_Pos))); + } + else + { + return ((uint32_t)(READ_BIT(ADCx->COMP_SEL, ADC_COMP_SEL_OFFSET_GAIN2 << ADC_COMP_SEL_OFFSET_GAIN6_Pos) + >> (ADC_COMP_SEL_OFFSET_GAIN2_Pos + ADC_COMP_SEL_OFFSET_GAIN3_Pos))); + } +} + +/** + * @brief Set the use of a specific calibration point for + * ADC single positive mode + * @rmtoll COMP_SEL ADC_COMP_SEL_OFFSET_GAIN7 LL_ADC_SetCalibPointForSinglePos + * @param ADCx ADC instance + * @param Point This parameter can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + * @param Range This parameter can be one of the following values: + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibPointForSinglePos(ADC_TypeDef *ADCx, uint32_t Point, uint32_t Range) +{ + if (Range == LL_ADC_VIN_RANGE_1V2) + { + MODIFY_REG(ADCx->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN1 << ADC_COMP_SEL_OFFSET_GAIN0_Pos), + (Point << (ADC_COMP_SEL_OFFSET_GAIN1_Pos + ADC_COMP_SEL_OFFSET_GAIN0_Pos))); + } + else if (Range == LL_ADC_VIN_RANGE_2V4) + { + MODIFY_REG(ADCx->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN1 << ADC_COMP_SEL_OFFSET_GAIN3_Pos), + (Point << (ADC_COMP_SEL_OFFSET_GAIN1_Pos + ADC_COMP_SEL_OFFSET_GAIN3_Pos))); + } + else + { + MODIFY_REG(ADCx->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN1 << ADC_COMP_SEL_OFFSET_GAIN6_Pos), + (Point << (ADC_COMP_SEL_OFFSET_GAIN1_Pos + ADC_COMP_SEL_OFFSET_GAIN6_Pos))); + } +} + + +/** + * @brief Get what calibration point is used for + * ADC single positive mode + * @rmtoll COMP_SEL ADC_COMP_SEL_OFFSET_GAIN7 LL_ADC_GetCalibPointForSinglePos + * @param ADCx ADC instance + * @param Range This parameter can be one of the following values: + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibPointForSinglePos(const ADC_TypeDef *ADCx, uint32_t Range) +{ + if (Range == LL_ADC_VIN_RANGE_1V2) + { + return ((uint32_t)(READ_BIT(ADCx->COMP_SEL, ADC_COMP_SEL_OFFSET_GAIN1) >> ADC_COMP_SEL_OFFSET_GAIN1_Pos)); + } + else if (Range == LL_ADC_VIN_RANGE_2V4) + { + return ((uint32_t)(READ_BIT(ADCx->COMP_SEL, ADC_COMP_SEL_OFFSET_GAIN1 << ADC_COMP_SEL_OFFSET_GAIN3_Pos) + >> (ADC_COMP_SEL_OFFSET_GAIN1_Pos + ADC_COMP_SEL_OFFSET_GAIN3_Pos))); + } + else + { + return ((uint32_t)(READ_BIT(ADCx->COMP_SEL, ADC_COMP_SEL_OFFSET_GAIN1 << ADC_COMP_SEL_OFFSET_GAIN6_Pos) + >> (ADC_COMP_SEL_OFFSET_GAIN1_Pos + ADC_COMP_SEL_OFFSET_GAIN3_Pos))); + } +} + +/** + * @brief Set the use of a specific calibration point for + * ADC single negative mode + * and battery level detector. + * @rmtoll COMP_SEL ADC_COMP_SEL_OFFSET_GAIN6 LL_ADC_SetCalibPointForSingleNeg + * @param ADCx ADC instance + * @param Point This parameter can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + * @param Range This parameter can be one of the following values: + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetCalibPointForSingleNeg(ADC_TypeDef *ADCx, uint32_t Point, uint32_t Range) +{ + if (Range == LL_ADC_VIN_RANGE_1V2) + { + MODIFY_REG(ADCx->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN0 << ADC_COMP_SEL_OFFSET_GAIN0_Pos), + (Point << (ADC_COMP_SEL_OFFSET_GAIN0_Pos + ADC_COMP_SEL_OFFSET_GAIN0_Pos))); + } + else if (Range == LL_ADC_VIN_RANGE_2V4) + { + MODIFY_REG(ADCx->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN0 << ADC_COMP_SEL_OFFSET_GAIN3_Pos), + (Point << (ADC_COMP_SEL_OFFSET_GAIN0_Pos + ADC_COMP_SEL_OFFSET_GAIN3_Pos))); + } + else + { + MODIFY_REG(ADCx->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN0 << ADC_COMP_SEL_OFFSET_GAIN6_Pos), + (Point << (ADC_COMP_SEL_OFFSET_GAIN0_Pos + ADC_COMP_SEL_OFFSET_GAIN6_Pos))); + } +} + + +/** + * @brief Get what calibration point is used for + * ADC single negative mode + * and battery level detector. + * @rmtoll COMP_SEL ADC_COMP_SEL_OFFSET_GAIN6 LL_ADC_GetCalibPointForSingleNeg + * @param ADCx ADC instance + * @param Range This parameter can be one of the following values: + * @arg @ref LL_ADC_VIN_RANGE_1V2 + * @arg @ref LL_ADC_VIN_RANGE_2V4 + * @arg @ref LL_ADC_VIN_RANGE_3V6 + * @retval Returned value can be one of the following values: + * @arg @ref LL_ADC_CALIB_POINT_1 + * @arg @ref LL_ADC_CALIB_POINT_2 + * @arg @ref LL_ADC_CALIB_POINT_3 + * @arg @ref LL_ADC_CALIB_POINT_4 + */ +__STATIC_INLINE uint32_t LL_ADC_GetCalibPointForSingleNeg(const ADC_TypeDef *ADCx, uint32_t Range) +{ + if (Range == LL_ADC_VIN_RANGE_1V2) + { + return ((uint32_t)(READ_BIT(ADCx->COMP_SEL, ADC_COMP_SEL_OFFSET_GAIN0) >> ADC_COMP_SEL_OFFSET_GAIN0_Pos)); + } + else if (Range == LL_ADC_VIN_RANGE_2V4) + { + return ((uint32_t)(READ_BIT(ADCx->COMP_SEL, ADC_COMP_SEL_OFFSET_GAIN0 << ADC_COMP_SEL_OFFSET_GAIN3_Pos) + >> (ADC_COMP_SEL_OFFSET_GAIN3_Pos))); + } + else + { + return ((uint32_t)(READ_BIT(ADCx->COMP_SEL, ADC_COMP_SEL_OFFSET_GAIN0 << ADC_COMP_SEL_OFFSET_GAIN6_Pos) + >> (ADC_COMP_SEL_OFFSET_GAIN3_Pos))); + } +} + +/** + * @} + */ + + +/** @defgroup ADC_LL_EF_AWD_TH_Configuration ADC Watchdog Thresholds Configuration functions + * @{ + */ + +/** + * @brief Configure the WatchDoG threshold low and high. + * @rmtoll WD_TH ADC_WD_TH_WD_LT LL_ADC_ConfigureAWDThresholds\n + * WD_TH ADC_WD_TH_WD_HT LL_ADC_ConfigureAWDThresholds + * @param ADCx ADC instance + * @param LowThreshold This parameter is a 12-bit value. + * @param HighThreshold This parameter is a 12-bit value. + * @retval None + */ +__STATIC_INLINE void LL_ADC_ConfigureAWDThresholds(ADC_TypeDef *ADCx, uint32_t LowThreshold, uint32_t HighThreshold) +{ + MODIFY_REG(ADCx->WD_TH, (ADC_WD_TH_WD_LT | ADC_WD_TH_WD_HT), (LowThreshold | (HighThreshold << ADC_WD_TH_WD_HT_Pos))); +} + + +/** + * @brief Set the WatchDoG threshold low. + * @rmtoll WD_TH ADC_WD_TH_WD_LT LL_ADC_SetAWDThresholdLow + * @param ADCx ADC instance + * @param Threshold This parameter is a 12-bit value. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAWDThresholdLow(ADC_TypeDef *ADCx, uint32_t Threshold) +{ + MODIFY_REG(ADCx->WD_TH, ADC_WD_TH_WD_LT, Threshold); +} + + +/** + * @brief Get the WatchDoG threshold low. + * @rmtoll WD_TH ADC_WD_TH_WD_LT LL_ADC_GetAWDThresholdLow + * @param ADCx ADC instance + * @retval Returned value of the low threshold. + */ +__STATIC_INLINE uint32_t LL_ADC_GetAWDThresholdLow(const ADC_TypeDef *ADCx) +{ + return ((uint32_t)(READ_BIT(ADCx->WD_TH, ADC_WD_TH_WD_LT))); +} + +/** + * @brief Set the WatchDoG threshold high. + * @rmtoll WD_TH ADC_WD_TH_WD_HT LL_ADC_SetAWDThresholdHigh + * @param ADCx ADC instance + * @param Threshold This parameter is a 12-bit value. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAWDThresholdHigh(ADC_TypeDef *ADCx, uint32_t Threshold) +{ + MODIFY_REG(ADCx->WD_TH, ADC_WD_TH_WD_HT, (Threshold << ADC_WD_TH_WD_HT_Pos)); +} + + +/** + * @brief Get the WatchDoG threshold high. + * @rmtoll WD_TH ADC_WD_TH_WD_HT LL_ADC_GetAWDThresholdHigh + * @param ADCx ADC instance + * @retval Returned value of the high threshold. + */ +__STATIC_INLINE uint32_t LL_ADC_GetAWDThresholdHigh(const ADC_TypeDef *ADCx) +{ + return ((uint32_t)(READ_BIT(ADCx->WD_TH, ADC_WD_TH_WD_HT) >> ADC_WD_TH_WD_HT_Pos)); +} + + +/** + * @brief Set the input channels the watchdog must check. + * @note ChannelMask can be an OR of the listed parameters. + * @rmtoll WD_CONF AWD_CHX LL_ADC_SetAWDInputChannels + * @param ADCx ADC instance + * @param ChannelMask This parameter can be a combination of the following values: + * @arg @ref LL_ADC_AWD_CH_VINM0 + * @arg @ref LL_ADC_AWD_CH_VINM1 + * @arg @ref LL_ADC_AWD_CH_VINM2 + * @arg @ref LL_ADC_AWD_CH_VINM3 + * @arg @ref LL_ADC_AWD_CH_MICROM + * @arg @ref LL_ADC_AWD_CH_VBAT + * @arg @ref LL_ADC_AWD_CH_GND_NEG + * @arg @ref LL_ADC_AWD_CH_VDDA_NEG + * @arg @ref LL_ADC_AWD_CH_VINP0 + * @arg @ref LL_ADC_AWD_CH_VINP1 + * @arg @ref LL_ADC_AWD_CH_VINP2 + * @arg @ref LL_ADC_AWD_CH_VINP3 + * @arg @ref LL_ADC_AWD_CH_MICROP + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR + * @arg @ref LL_ADC_AWD_CH_GND_POS + * @arg @ref LL_ADC_AWD_CH_VDDA_POS + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetAWDInputChannels(ADC_TypeDef *ADCx, uint32_t ChannelMask) +{ + MODIFY_REG(ADCx->WD_CONF, ADC_WD_CONF_AWD_CHX, ChannelMask); +} + + +/** + * @brief Get the input channels the watchdog must check. + * @note The returned value can be an OR of the listed parameters. + * @rmtoll WD_CONF AWD_CHX LL_ADC_GetAWDInputChannels + * @param ADCx ADC instance + * @retval Returned value can be a combination of the following values: + * @arg @ref LL_ADC_AWD_CH_VINM0 + * @arg @ref LL_ADC_AWD_CH_VINM1 + * @arg @ref LL_ADC_AWD_CH_VINM2 + * @arg @ref LL_ADC_AWD_CH_VINM3 + * @arg @ref LL_ADC_AWD_CH_MICROM + * @arg @ref LL_ADC_AWD_CH_VBAT + * @arg @ref LL_ADC_AWD_CH_GND_NEG + * @arg @ref LL_ADC_AWD_CH_VDDA_NEG + * @arg @ref LL_ADC_AWD_CH_VINP0 + * @arg @ref LL_ADC_AWD_CH_VINP1 + * @arg @ref LL_ADC_AWD_CH_VINP2 + * @arg @ref LL_ADC_AWD_CH_VINP3 + * @arg @ref LL_ADC_AWD_CH_MICROP + * @arg @ref LL_ADC_AWD_CH_TEMPSENSOR + * @arg @ref LL_ADC_AWD_CH_GND_POS + * @arg @ref LL_ADC_AWD_CH_VDDA_POS + */ +__STATIC_INLINE uint32_t LL_ADC_GetAWDInputChannels(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->WD_CONF, ADC_WD_CONF_AWD_CHX)); +} + + +/** + * @} + */ + + +/** @defgroup ADC_LL_EF_Output_Data ADC Output Data functions + * @{ + */ + + +/** + * @brief Get the 16-bit output data from the Down Sampler (DS). + * @rmtoll DS_DATAOUT DS_DATA LL_ADC_DSGetOutputData + * @param ADCx ADC instance + * @retval The output data from DS. + */ +__STATIC_INLINE uint32_t LL_ADC_DSGetOutputData(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->DS_DATAOUT, ADC_DS_DATAOUT_DS_DATA)); +} + +/** + * @} + */ + + +/** @defgroup ADC_LL_EF_FLAG_Management ADC flag management + * @{ + */ + +/** + * @brief Get all the flags status. + * @param ADCx ADC instance + * @retval All the status flags of the register IRQ_STATUS. + * The value is a combination of the following values: + * @arg @ref LL_ADC_IRQ_FLAG_OVRDS + * @arg @ref LL_ADC_IRQ_FLAG_AWD1 + * @arg @ref LL_ADC_IRQ_FLAG_EOC + * @arg @ref LL_ADC_IRQ_FLAG_EOS + * @arg @ref LL_ADC_IRQ_FLAG_EODS + */ +__STATIC_INLINE uint32_t LL_ADC_GetActiveFlags(ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->IRQ_STATUS, LL_ADC_IRQ_FLAGS_MASK)); +} + +/** + * @brief Clear all the flags status. + * @param ADCx ADC instance + * @param FlagsMask This parameter can be a combination of the following values: + * @arg @ref LL_ADC_IRQ_FLAG_OVRDS + * @arg @ref LL_ADC_IRQ_FLAG_AWD1 + * @arg @ref LL_ADC_IRQ_FLAG_EOC + * @arg @ref LL_ADC_IRQ_FLAG_EOS + * @arg @ref LL_ADC_IRQ_FLAG_EODS + * @retval None. + */ +__STATIC_INLINE void LL_ADC_ClearActiveFlags(ADC_TypeDef *ADCx, uint32_t FlagsMask) +{ + WRITE_REG(ADCx->IRQ_STATUS, FlagsMask); +} + +/** + * @brief Get if the flags status is set. + * @param ADCx ADC instance + * @param FlagsMask This parameter can be one of the following values: + * @arg @ref LL_ADC_IRQ_FLAG_OVRDS + * @arg @ref LL_ADC_IRQ_FLAG_AWD1 + * @arg @ref LL_ADC_IRQ_FLAG_EOC + * @arg @ref LL_ADC_IRQ_FLAG_EOS + * @arg @ref LL_ADC_IRQ_FLAG_EODS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag(const ADC_TypeDef *ADCx, uint32_t FlagsMask) +{ + return ((READ_BIT(ADCx->IRQ_STATUS, FlagsMask) == (FlagsMask)) ? 1UL : 0UL); +} + +/** + * @brief Get the status of the flag OVR_DS. + * The flag indicates, if set, the Down Sampler output is overran (at least one data is lost). + * @rmtoll IRQ_STATUS OVR_DS_IRQ LL_ADC_IsActiveFlag_OVRDS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_OVRDS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IRQ_STATUS, ADC_IRQ_STATUS_OVR_DS_IRQ) == (ADC_IRQ_STATUS_OVR_DS_IRQ)) ? 1UL : 0UL); +} + +/** + * @brief Clear the flag OVR_DS. + * @rmtoll IRQ_STATUS OVR_DS_IRQ LL_ADC_ClearFlag_OVRDS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_OVRDS(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->IRQ_STATUS, ADC_IRQ_STATUS_OVR_DS_IRQ); +} + +/** + * @brief Get the status of the flag AWD. + * The flag indicates, if set, an event of the watchdog has occurred. + * @rmtoll IRQ_STATUS AWD_IRQ LL_ADC_IsActiveFlag_AWD + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_AWD(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IRQ_STATUS, ADC_IRQ_STATUS_AWD_IRQ) == (ADC_IRQ_STATUS_AWD_IRQ)) ? 1UL : 0UL); +} + +/** + * @brief Clear the flag AWD. + * @rmtoll IRQ_STATUS AWD_IRQ LL_ADC_ClearFlag_AWD + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_AWD(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->IRQ_STATUS, ADC_IRQ_STATUS_AWD_IRQ); +} + +/** + * @brief Get the status of the flag EOS. + * The flag indicates, if set, the End Of a Sequence of conversion. + * @rmtoll IRQ_STATUS EOS_IRQ LL_ADC_IsActiveFlag_EOS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IRQ_STATUS, ADC_IRQ_STATUS_EOS_IRQ) == (ADC_IRQ_STATUS_EOS_IRQ)) ? 1UL : 0UL); +} + +/** + * @brief Clear the flag EOS. + * @rmtoll IRQ_STATUS EOS_IRQ LL_ADC_ClearFlag_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOS(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->IRQ_STATUS, ADC_IRQ_STATUS_EOS_IRQ); +} + +/** + * @brief Get the status of the flag EODS. + * The flag indicates, if set, the End Of a Down Sampler conversion. + * @rmtoll IRQ_STATUS EODS_IRQ LL_ADC_IsActiveFlag_EODS + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EODS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IRQ_STATUS, ADC_IRQ_STATUS_EODS_IRQ) == (ADC_IRQ_STATUS_EODS_IRQ)) ? 1UL : 0UL); +} + +/** + * @brief Clear the flag EODS. + * @rmtoll IRQ_STATUS EODS_IRQ LL_ADC_ClearFlag_EODS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EODS(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->IRQ_STATUS, ADC_IRQ_STATUS_EODS_IRQ); +} + +/** + * @brief Get the status of the flag EOC. + * The flag indicates, if set, the End Of Conversion. + * @rmtoll IRQ_STATUS EOC_IRQ LL_ADC_IsActiveFlag_EOC + * @param ADCx ADC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_EOC(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IRQ_STATUS, ADC_IRQ_STATUS_EOC_IRQ) == (ADC_IRQ_STATUS_EOC_IRQ)) ? 1UL : 0UL); +} + + +/** + * @brief Clear the flag EOC. + * @rmtoll IRQ_STATUS EOC_IRQ LL_ADC_ClearFlag_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_ClearFlag_EOC(ADC_TypeDef *ADCx) +{ + WRITE_REG(ADCx->IRQ_STATUS, ADC_IRQ_STATUS_EOC_IRQ); +} + +/** + * @} + */ + +/** @defgroup ADC_LL_EF_IT_Management ADC IT management + * @{ + */ + +/** + * @brief Enable the interrupts according to the interrupt mask passed as parameter. + * @param ADCx ADC instance + * @param IrqMask This parameter can be a combination of the following values: + * @arg @ref LL_ADC_IRQ_EN_OVRDS + * @arg @ref LL_ADC_IRQ_EN_AWD1 + * @arg @ref LL_ADC_IRQ_EN_EOS + * @arg @ref LL_ADC_IRQ_EN_EODS + * @retval None. + */ +__STATIC_INLINE void LL_ADC_EnableIT(ADC_TypeDef *ADCx, uint32_t IrqMask) +{ + SET_BIT(ADCx->IRQ_ENABLE, IrqMask); +} + + +/** + * @brief Disable the interrupts according to the interrupt mask passed as parameter. + * @param ADCx ADC instance + * @param IrqMask This parameter can be a combination of the following values: + * @arg @ref LL_ADC_IRQ_EN_OVRDS + * @arg @ref LL_ADC_IRQ_EN_AWD1 + * @arg @ref LL_ADC_IRQ_EN_EOS + * @arg @ref LL_ADC_IRQ_EN_EODS + * @retval None. + */ +__STATIC_INLINE void LL_ADC_DisableIT(ADC_TypeDef *ADCx, uint32_t IrqMask) +{ + CLEAR_BIT(ADCx->IRQ_ENABLE, IrqMask); +} + + +/** + * @brief Get if the specific flag is enabled or not. + * @param ADCx ADC instance + * @param IrqMask This parameter can be one of the following values: + * @arg @ref LL_ADC_IRQ_FLAG_OVRDS + * @arg @ref LL_ADC_IRQ_FLAG_AWD1 + * @arg @ref LL_ADC_IRQ_FLAG_EOC + * @arg @ref LL_ADC_IRQ_FLAG_EOS + * @arg @ref LL_ADC_IRQ_FLAG_EODS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT(const ADC_TypeDef *ADCx, uint32_t IrqMask) +{ + return ((READ_BIT(ADCx->IRQ_ENABLE, IrqMask) == (IrqMask)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Down Sampler overrun interrupt. + * @rmtoll IRQ_ENABLE OVR_DS_IRQ_ENA LL_ADC_EnableIT_DSOVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_DSOVR(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_OVR_DS_IRQ_ENA); +} + + +/** + * @brief Disable the Down Sampler overrun interrupt. + * @rmtoll IRQ_ENABLE OVR_DS_IRQ_ENA LL_ADC_DisableIT_DSOVR + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_DSOVR(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_OVR_DS_IRQ_ENA); +} + + +/** + * @brief Check if the Down Sampler overrun interrupt is enabled. + * @rmtoll IRQ_ENABLE OVR_DS_IRQ_ENA LL_ADC_IsEnabledIT_DSOVR + * @param ADCx ADC instance + * @retval 0: The interrupt is not enabled, 1: The interrupt is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_DSOVR(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_OVR_DS_IRQ_ENA) == (ADC_IRQ_ENABLE_OVR_DS_IRQ_ENA)) ? 1UL : 0UL); +} + + +/** + * @brief Enable the watchdog event interrupt. + * @rmtoll IRQ_ENABLE AWD_IRQ_ENA LL_ADC_EnableIT_AWD + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_AWD(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_AWD_IRQ_ENA); +} + + +/** + * @brief Disable the watchdog event interrupt. + * @rmtoll IRQ_ENABLE AWD_IRQ_ENA LL_ADC_DisableIT_AWD + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_AWD(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_AWD_IRQ_ENA); +} + + +/** + * @brief Check if the watchdog event interrupt is enabled. + * @rmtoll IRQ_ENABLE AWD_IRQ_ENA LL_ADC_IsEnabledIT_AWD + * @param ADCx ADC instance + * @retval 0: The interrupt is not enabled, 1: The interrupt is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_AWD(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_AWD_IRQ_ENA) == (ADC_IRQ_ENABLE_AWD_IRQ_ENA)) ? 1UL : 0UL); +} + + +/** + * @brief Enable the End Of a Sequence of conversion interrupt. + * @rmtoll IRQ_ENABLE EOS_IRQ_ENA LL_ADC_EnableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOS(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_EOS_IRQ_ENA); +} + + +/** + * @brief Disable the End Of a Sequence of conversion interrupt. + * @rmtoll IRQ_ENABLE EOS_IRQ_ENA LL_ADC_DisableIT_EOS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOS(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_EOS_IRQ_ENA); +} + + +/** + * @brief Check if the End Of a Sequence of conversion interrupt is enabled. + * @rmtoll IRQ_ENABLE EOS_IRQ_ENA LL_ADC_IsEnabledIT_EOS + * @param ADCx ADC instance + * @retval 0: The interrupt is not enabled, 1: The interrupt is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_EOS_IRQ_ENA) == (ADC_IRQ_ENABLE_EOS_IRQ_ENA)) ? 1UL : 0UL); +} + +/** + * @brief Enable the End Of a Down Sampler conversion interrupt. + * @rmtoll IRQ_ENABLE EODS_IRQ_ENA LL_ADC_EnableIT_EODS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EODS(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_EODS_IRQ_ENA); +} + + +/** + * @brief Disable the End Of a Down Sampler conversion interrupt. + * @rmtoll IRQ_ENABLE EODS_IRQ_ENA LL_ADC_DisableIT_EODS + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EODS(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_EODS_IRQ_ENA); +} + + +/** + * @brief Check if the End Of a Down Sampler conversion interrupt is enabled. + * @rmtoll IRQ_ENABLE EODS_IRQ_ENA LL_ADC_IsEnabledIT_EODS + * @param ADCx ADC instance + * @retval 0: The interrupt is not enabled, 1: The interrupt is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EODS(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_EODS_IRQ_ENA) == (ADC_IRQ_ENABLE_EODS_IRQ_ENA)) ? 1UL : 0UL); +} + +/** + * @brief Enable the End Of Conversion interrupt. + * @rmtoll IRQ_ENABLE EOC_IRQ_ENA LL_ADC_EnableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_EnableIT_EOC(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_EOC_IRQ_ENA); +} + + +/** + * @brief Disable the End Of Conversion interrupt. + * @rmtoll IRQ_ENABLE EOC_IRQ_ENA LL_ADC_DisableIT_EOC + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_DisableIT_EOC(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_EOC_IRQ_ENA); +} + + +/** + * @brief Check if the End Of Conversion interrupt is enabled. + * @rmtoll IRQ_ENABLE EOC_IRQ_ENA LL_ADC_IsEnabledIT_EOC + * @param ADCx ADC instance + * @retval 0: The interrupt is not enabled, 1: The interrupt is enabled. + */ +__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_EOC(const ADC_TypeDef *ADCx) +{ + return ((READ_BIT(ADCx->IRQ_ENABLE, ADC_IRQ_ENABLE_EOC_IRQ_ENA) == (ADC_IRQ_ENABLE_EOC_IRQ_ENA)) ? 1UL : 0UL); +} + +/** + * @} + */ + + +/** @defgroup ADC_LL_EF_Delay_Setting ADC Dealy Setting + * @{ + */ + +#if defined(ADC_TIMER_CONF_VBIAS_PRECH_DELAY) +/** + * @brief Set the duration of a waiting time starting at rising edge of + * PGA_EN signal and corresponding to the VBIAS precharge duration. + * The time unit is 4 us. Max delay is 1.02 ms, default value is 128 us. + * @note The minimum recommended value for this bitfield is 150 to have 600 us. + * @rmtoll TIMER_CONF VBIAS_PRECH_DELAY LL_ADC_SetVbiasPrechargeDelay + * @param ADCx ADC instance + * @param Delay This parameter is a 8-bit value. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetVbiasPrechargeDelay(ADC_TypeDef *ADCx, uint32_t Delay) +{ + MODIFY_REG(ADCx->TIMER_CONF, ADC_TIMER_CONF_VBIAS_PRECH_DELAY, Delay << ADC_TIMER_CONF_VBIAS_PRECH_DELAY_Pos); +} + + +/** + * @brief Get the duration of a waiting time starting at rising edge of + * PGA_EN signal and corresponding to the VBIAS precharge duration. + * The time unit is 4 us. Max delay is 1.02 ms. + * @note The minimum recommended value for this bitfield is 150 to have 600 us. + * @rmtoll TIMER_CONF VBIAS_PRECH_DELAY LL_ADC_GetVbiasPrechargeDelay + * @param ADCx ADC instance + * @retval Returned value is a 8-bit value. + */ +__STATIC_INLINE uint32_t LL_ADC_GetVbiasPrechargeDelay(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->TIMER_CONF, ADC_TIMER_CONF_VBIAS_PRECH_DELAY)); +} + +/** + * @brief Enable the 1024x prescaler used to compute the duration of VBIAS + * precharge duration + * @note The time unit is 4 us with prescaler disabled. + * The time unit is 4096 us with prescaler enabled. + * @rmtoll TIMER_CONF PRECH_DELAY_SEL LL_ADC_VbiasPrechargeDelayPrescalerEnable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_VbiasPrechargeDelayPrescalerEnable(ADC_TypeDef *ADCx) +{ + SET_BIT(ADCx->TIMER_CONF, ADC_TIMER_CONF_PRECH_DELAY_SEL); +} + +/** + * @brief Enable the 1024x prescaler used to compute the duration of VBIAS + * precharge duration + * @note The time unit is 4 us with prescaler disabled. + * The time unit is 4096 us with prescaler enabled. + * @rmtoll TIMER_CONF PRECH_DELAY_SEL LL_ADC_VbiasPrechargeDelayPrescalerDisable + * @param ADCx ADC instance + * @retval None + */ +__STATIC_INLINE void LL_ADC_VbiasPrechargeDelayPrescalerDisable(ADC_TypeDef *ADCx) +{ + CLEAR_BIT(ADCx->TIMER_CONF, ADC_TIMER_CONF_PRECH_DELAY_SEL); +} + +#endif /* ADC_TIMER_CONF_VBIAS_PRECH_DELAY */ + +#if defined (ADC_TIMER_CONF_ADC_LDO_DELAY) +/** + * @brief Set the duration of the waiting time between the ADC_LDO enable and + * the ADC_ON, to let time to the LDO to stabilize itself before + * starting a conversion + * The time unit is 4 us. Max delay is 1.02 ms, default value is 160 us. + * @rmtoll TIMER_CONF ADC_LDO_DELAY LL_ADC_SetADCLDODelay + * @param ADCx ADC instance + * @param Delay This parameter is a 8-bit value. + * @retval None + */ +__STATIC_INLINE void LL_ADC_SetADCLDODelay(ADC_TypeDef *ADCx, uint32_t Delay) +{ + MODIFY_REG(ADCx->TIMER_CONF, ADC_TIMER_CONF_ADC_LDO_DELAY, Delay); +} + + +/** + * @brief Get the duration of the waiting time between the ADC_LDO enable and + * the ADC_ON, to let time to the LDO to stabilize itself before + * starting a conversion + * The time unit is 4 us. Max delay is 1.02 ms, default value is 160 us. + * @rmtoll TIMER_CONF ADC_LDO_DELAY LL_ADC_GetADCLDODelay + * @param ADCx ADC instance + * @retval Returned value is a 8-bit value. + */ +__STATIC_INLINE uint32_t LL_ADC_GetADCLDODelay(const ADC_TypeDef *ADCx) +{ + return (uint32_t)(READ_BIT(ADCx->TIMER_CONF, ADC_TIMER_CONF_ADC_LDO_DELAY)); +} +#endif /* ADC_TIMER_CONF_ADC_LDO_DELAY */ + + +/** + * @} + */ + + +/** @defgroup ADC_LL_CALIB_CONVERSION ADC Calibration and Conversion functions + * @{ + */ + + +/** + * @brief Return the calibration value for the gain of + * single ended positive input at range 3.6 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE uint16_t LL_ADC_GET_CALIB_GAIN_FOR_VINPX_3V6(void) +{ + return (uint16_t)((*(uint32_t *)ADC_CALIB_ADDRESS_VINPX_3V6) & 0xFFFUL); +} + + +/** + * @brief Return the calibration value for the offset of + * single ended positive input at range 3.6 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE int8_t LL_ADC_GET_CALIB_OFFSET_FOR_VINPX_3V6(void) +{ + int8_t calibration_offset = ((*(uint32_t *)ADC_CALIB_ADDRESS_VINPX_3V6) >> 12UL); + + return (int8_t)calibration_offset; +} + + +/** + * @brief Return the calibration value for the gain of + * single ended positive input at range 2.4 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE uint16_t LL_ADC_GET_CALIB_GAIN_FOR_VINPX_2V4(void) +{ + return (uint16_t)((*(uint32_t *)ADC_CALIB_ADDRESS_VINPX_2V4) & 0xFFFUL); +} + + +/** + * @brief Return the calibration value for the offset of + * single ended positive input at range 2.4 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE int8_t LL_ADC_GET_CALIB_OFFSET_FOR_VINPX_2V4(void) +{ + int8_t calibration_offset = ((*(uint32_t *)ADC_CALIB_ADDRESS_VINPX_2V4) >> 12UL); + + return (int8_t)calibration_offset; +} + + +/** + * @brief Return the calibration value for the gain of + * single ended positive input at range 1.2 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE uint16_t LL_ADC_GET_CALIB_GAIN_FOR_VINPX_1V2(void) +{ + return (uint16_t)((*(uint32_t *)ADC_CALIB_ADDRESS_VINPX_1V2) & 0xFFFUL); +} + + +/** + * @brief Return the calibration value for the offset of + * single ended positive input at range 1.2 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE int8_t LL_ADC_GET_CALIB_OFFSET_FOR_VINPX_1V2(void) +{ + int8_t calibration_offset = ((*(uint32_t *)ADC_CALIB_ADDRESS_VINPX_1V2) >> 12UL); + + return (int8_t)calibration_offset; +} + + +/** + * @brief Return the calibration value for the gain of + * single ended negative input at range 3.6 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE uint16_t LL_ADC_GET_CALIB_GAIN_FOR_VINMX_3V6(void) +{ + return (uint16_t)((*(uint32_t *)ADC_CALIB_ADDRESS_VINMX_3V6) & 0xFFFUL); +} + + +/** + * @brief Return the calibration value for the offset of + * single ended negative input at range 3.6 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE int8_t LL_ADC_GET_CALIB_OFFSET_FOR_VINMX_3V6(void) +{ + int8_t calibration_offset = ((*(uint32_t *)ADC_CALIB_ADDRESS_VINMX_3V6) >> 12UL); + + return - (int8_t)calibration_offset; +} + +/** + * @brief Return the calibration value for the gain of + * single ended negative input at range 2.4 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE uint16_t LL_ADC_GET_CALIB_GAIN_FOR_VINMX_2V4(void) +{ + return (uint16_t)((*(uint32_t *)ADC_CALIB_ADDRESS_VINMX_2V4) & 0xFFFUL); +} + + +/** + * @brief Return the calibration value for the offset of + * single ended negative input at range 2.4 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE int8_t LL_ADC_GET_CALIB_OFFSET_FOR_VINMX_2V4(void) +{ + int8_t calibration_offset = ((*(uint32_t *)ADC_CALIB_ADDRESS_VINMX_2V4) >> 12UL); + + return - (int8_t)calibration_offset; +} + + +/** + * @brief Return the calibration value for the gain of + * single ended negative input at range 1.2 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE uint16_t LL_ADC_GET_CALIB_GAIN_FOR_VINMX_1V2(void) +{ + return (uint16_t)((*(uint32_t *)ADC_CALIB_ADDRESS_VINMX_1V2) & 0xFFFUL); +} + + +/** + * @brief Return the calibration value for the offset of + * single ended negative input at range 1.2 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE int8_t LL_ADC_GET_CALIB_OFFSET_FOR_VINMX_1V2(void) +{ + int8_t calibration_offset = ((*(uint32_t *)ADC_CALIB_ADDRESS_VINMX_1V2) >> 12UL); + + return - (int8_t)calibration_offset; +} + + +/** + * @brief Return the calibration value for the gain of + * differential input at range 3.6 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE uint16_t LL_ADC_GET_CALIB_GAIN_FOR_VINDIFF_3V6(void) +{ + return (uint16_t)((*(uint32_t *)ADC_CALIB_ADDRESS_VINDIFF_3V6) & 0xFFFUL); +} + + +/** + * @brief Return the calibration value for the offset of + * differential input at range 3.6 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE int8_t LL_ADC_GET_CALIB_OFFSET_FOR_VINDIFF_3V6(void) +{ + int8_t calibration_offset = ((*(uint32_t *)ADC_CALIB_ADDRESS_VINDIFF_3V6) >> 12UL); + + return ((int8_t)calibration_offset); +} + +/** + * @brief Return the calibration value for the gain of + * differential input at range 2.4 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE uint16_t LL_ADC_GET_CALIB_GAIN_FOR_VINDIFF_2V4(void) +{ + return (uint16_t)((*(uint32_t *)ADC_CALIB_ADDRESS_VINDIFF_2V4) & 0xFFFUL); +} + + +/** + * @brief Return the calibration value for the offset of + * differential input at range 2.4 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE int8_t LL_ADC_GET_CALIB_OFFSET_FOR_VINDIFF_2V4(void) +{ + int8_t calibration_offset = ((*(uint32_t *)ADC_CALIB_ADDRESS_VINDIFF_2V4) >> 12UL); + + return ((int8_t)calibration_offset); +} + + +/** + * @brief Return the calibration value for the gain of + * differential input at range 1.2 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE uint16_t LL_ADC_GET_CALIB_GAIN_FOR_VINDIFF_1V2(void) +{ + return (uint16_t)((*(uint32_t *)ADC_CALIB_ADDRESS_VINDIFF_1V2) & 0xFFFUL); +} + + +/** + * @brief Return the calibration value for the offset of + * differential input at range 1.2 V. + * Use the function LL_ADC_ConfigureCalibPointX() with X = 1, 2, 3 or 4. + * @retval Returned value to be put in COMP_X register if 0xFFFFFFFF means no calibration point. + */ +__STATIC_INLINE int8_t LL_ADC_GET_CALIB_OFFSET_FOR_VINDIFF_1V2(void) +{ + int8_t calibration_offset = ((*(uint32_t *)ADC_CALIB_ADDRESS_VINDIFF_1V2) >> 12UL); + + return ((int8_t)calibration_offset); +} + +/** + * @} + */ + + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup ADC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +/* De-initialization of ADC instance */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx); + +/* Initialization of ADC instance */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, const LL_ADC_InitTypeDef *pADC_InitStruct); + +/* Initialization of some features of ADC instance */ +ErrorStatus LL_ADC_VoltageRangeInit(ADC_TypeDef *ADCx, const LL_ADC_VoltRangeInitTypeDef *pVoltRange_InitStruct); +ErrorStatus LL_ADC_SequenceInit(ADC_TypeDef *ADCx, const LL_ADC_SequenceInitTypeDef *pSequence_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32WL3x_LL_ADC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_bus.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_bus.h new file mode 100644 index 0000000000..da0299dfdf --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_bus.h @@ -0,0 +1,959 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_bus.h + * @author MCD Application Team + * @brief Header file of BUS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ##### RCC Limitations ##### + ============================================================================== + [..] + A delay between an RCC peripheral clock enable and the effective peripheral + enabling should be taken into account in order to manage the peripheral read/write + from/to registers. + (+) This delay depends on the peripheral mapping. + (++) AHB & APB peripherals, 1 dummy read is necessary + + [..] + Workarounds: + (#) For AHB & APB peripherals, a dummy read to the peripheral register has been + inserted in each LL_{BUS}_GRP{x}_EnableClock() function. + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_BUS_H +#define STM32WL3x_LL_BUS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup BUS_LL BUS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants + * @{ + */ + +/** @defgroup BUS_LL_AHB1_GRP1_PERIPH AHB PERIPH + * @{ + */ +#define LL_AHB1_GRP1_PERIPH_ALL (RCC_AHBENR_DMAEN|\ + RCC_AHBENR_GPIOAEN|RCC_AHBENR_GPIOBEN|RCC_AHBENR_CRCEN|RCC_AHBENR_RNGEN|RCC_AHBENR_AESEN) +#define LL_AHB1_GRP1_PERIPH_DMA RCC_AHBENR_DMAEN +#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHBENR_GPIOAEN +#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHBENR_GPIOBEN +#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN +#define LL_AHB1_GRP1_PERIPH_RNG RCC_AHBENR_RNGEN +#if defined(AES) +#define LL_AHB1_GRP1_PERIPH_AES RCC_AHBENR_AESEN +#endif + +#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBSMENR_FLASHSMEN +#define LL_AHB1_GRP1_PERIPH_SRAM0 RCC_AHBSMENR_SRAM0SMEN +#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHBSMENR_SRAM1SMEN + +/** + * @} + */ + +/** @defgroup BUS_LL_APB0_GRP1_PERIPH APB0 PERIPH + * @{ + */ +#define LL_APB0_GRP1_PERIPH_ALL (RCC_APB0ENR_TIM2EN|\ + RCC_APB0ENR_TIM16EN|\ + RCC_APB0ENR_SYSCFGEN|\ + RCC_APB0ENR_LCDEN|\ + RCC_APB0ENR_COMPEN|RCC_APB0ENR_DACEN|RCC_APB0ENR_RTCEN|RCC_APB0ENR_LCSCEN|RCC_APB0ENR_WDGEN|RCC_APB0ENR_DBGMCUEN) +#if defined(TIM1) +#define LL_APB0_GRP1_PERIPH_TIM1 RCC_APB0ENR_TIM1EN +#endif +#if defined(TIM2) +#define LL_APB0_GRP1_PERIPH_TIM2 RCC_APB0ENR_TIM2EN +#endif +#if defined(TIM16) +#define LL_APB0_GRP1_PERIPH_TIM16 RCC_APB0ENR_TIM16EN +#endif +#if defined(TIM17) +#define LL_APB0_GRP1_PERIPH_TIM17 RCC_APB0ENR_TIM17EN +#endif +#define LL_APB0_GRP1_PERIPH_SYSCFG RCC_APB0ENR_SYSCFGEN +#if defined(LCD) +#define LL_APB0_GRP1_PERIPH_LCDC RCC_APB0ENR_LCDEN +#endif +#if defined(COMP1) +#define LL_APB0_GRP1_PERIPH_COMP RCC_APB0ENR_COMPEN +#endif +#if defined(DAC1) +#define LL_APB0_GRP1_PERIPH_DAC RCC_APB0ENR_DACEN +#endif +#define LL_APB0_GRP1_PERIPH_RTC RCC_APB0ENR_RTCEN +#if defined(LCSC) +#define LL_APB0_GRP1_PERIPH_LCSC RCC_APB0ENR_LCSCEN +#endif +#define LL_APB0_GRP1_PERIPH_WDG RCC_APB0ENR_WDGEN +#if defined(DBGMCU) +#define LL_APB0_GRP1_PERIPH_DBGMCU RCC_APB0ENR_DBGMCUEN +#endif +/** + * @} + */ + + +/** @defgroup BUS_LL_APB1_GRP1_PERIPH APB1 PERIPH + * @{ + */ +#define LL_APB1_GRP1_PERIPH_ALL (RCC_APB1ENR_SPI1EN|\ + RCC_APB1ENR_ADCDIGEN|\ + RCC_APB1ENR_ADCANAEN|RCC_APB1ENR_LPUARTEN|RCC_APB1ENR_USARTEN|RCC_APB1ENR_SPI3EN|RCC_APB1ENR_I2C1EN|RCC_APB1ENR_I2C2EN) +#if defined(SPI1) +#define LL_APB1_GRP1_PERIPH_SPI1 RCC_APB1ENR_SPI1EN +#endif +#define LL_APB1_GRP1_PERIPH_ADCDIG RCC_APB1ENR_ADCDIGEN +#define LL_APB1_GRP1_PERIPH_ADCANA RCC_APB1ENR_ADCANAEN +#define LL_APB1_GRP1_PERIPH_LPUART1 RCC_APB1ENR_LPUARTEN +#define LL_APB1_GRP1_PERIPH_USART1 RCC_APB1ENR_USARTEN +#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN +#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN +#if defined(I2C2) +#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN +#endif +/** + * @} + */ + +/** @defgroup BUS_LL_APB2_GRP1_PERIPH APB2 PERIPH + * @{ + */ +#if defined(MR_SUBG_RADIO) +#define LL_APB2_GRP1_PERIPH_ALL (RCC_APB2ENR_MRSUBGEN|RCC_APB2ENR_LPAWUREN) +#define LL_APB2_GRP1_PERIPH_MRSUBG RCC_APB2ENR_MRSUBGEN +#define LL_APB2_GRP1_PERIPH_LPAWUR RCC_APB2ENR_LPAWUREN +#endif +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions + * @{ + */ + +/** @defgroup BUS_LL_EF_AHB AHB + * @{ + */ +/** + * @brief Enable AHB peripherals clock. + * @rmtoll AHBENR DMAEN LL_AHB1_GRP1_EnableClock + * AHBENR GPIOAEN LL_AHB1_GRP1_EnableClock + * AHBENR GPIOBEN LL_AHB1_GRP1_EnableClock + * AHBENR CRCEN LL_AHB1_GRP1_EnableClock + * AHBENR RNGEN LL_AHB1_GRP1_EnableClock + * AHBENR AESEN LL_AHB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_AHB1_GRP1_PERIPH_DMA + * @arg LL_AHB1_GRP1_PERIPH_GPIOA + * @arg LL_AHB1_GRP1_PERIPH_GPIOB + * @arg LL_AHB1_GRP1_PERIPH_CRC + * @arg LL_AHB1_GRP1_PERIPH_RNG + * @arg LL_AHB1_GRP1_PERIPH_AES + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB peripheral clock is enabled or not + * @rmtoll AHBENR DMAEN LL_AHB1_GRP1_IsEnabledClock + * AHBENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock + * AHBENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock + * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock + * AHBENR RNGEN LL_AHB1_GRP1_IsEnabledClock + * AHBENR AESEN LL_AHB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_AHB1_GRP1_PERIPH_DMA + * @arg LL_AHB1_GRP1_PERIPH_GPIOA + * @arg LL_AHB1_GRP1_PERIPH_GPIOB + * @arg LL_AHB1_GRP1_PERIPH_CRC + * @arg LL_AHB1_GRP1_PERIPH_RNG + * @arg LL_AHB1_GRP1_PERIPH_AES + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHBENR, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable AHB peripherals clock. + * @rmtoll AHBENR DMAENN LL_AHB1_GRP1_DisableClock + * AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock + * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock + * AHBENR CRCEN LL_AHB1_GRP1_DisableClock + * AHBENR RNGEN LL_AHB1_GRP1_DisableClock + * AHBENR AESEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_AHB1_GRP1_PERIPH_DMA + * @arg LL_AHB1_GRP1_PERIPH_GPIOA + * @arg LL_AHB1_GRP1_PERIPH_GPIOB + * @arg LL_AHB1_GRP1_PERIPH_CRC + * @arg LL_AHB1_GRP1_PERIPH_RNG + * @arg LL_AHB1_GRP1_PERIPH_AES + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBENR, Periphs); +} + +/** + * @brief Enable AHB peripherals clock in Sleep Mode + * @rmtoll AHBENR DMAENN LL_AHB1_GRP1_DisableClock + * AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock + * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock + * AHBENR SRAM0EN LL_AHB1_GRP1_DisableClock + * AHBENR SRMA1EN LL_AHB1_GRP1_DisableClock + * AHBENR CRCEN LL_AHB1_GRP1_DisableClock + * AHBENR RNGEN LL_AHB1_GRP1_DisableClock + * AHBENR AESEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_AHB1_GRP1_PERIPH_DMA + * @arg LL_AHB1_GRP1_PERIPH_FLASH + * @arg LL_AHB1_GRP1_PERIPH_GPIOA + * @arg LL_AHB1_GRP1_PERIPH_GPIOB + * @arg LL_AHB1_GRP1_PERIPH_SRAM0 + * @arg LL_AHB1_GRP1_PERIPH_SRAM1 + * @arg LL_AHB1_GRP1_PERIPH_CRC + * @arg LL_AHB1_GRP1_PERIPH_RNG + * @arg LL_AHB1_GRP1_PERIPH_AES + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleepMode(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->AHBSMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->AHBSMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if AHB peripheral clock is enabled or not in Sleep Mode + * @rmtoll AHBENR DMAENN LL_AHB1_GRP1_DisableClock + * AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock + * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock + * AHBENR SRAM0EN LL_AHB1_GRP1_DisableClock + * AHBENR SRMA1EN LL_AHB1_GRP1_DisableClock + * AHBENR CRCEN LL_AHB1_GRP1_DisableClock + * AHBENR RNGEN LL_AHB1_GRP1_DisableClock + * AHBENR AESEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_AHB1_GRP1_PERIPH_DMA + * @arg LL_AHB1_GRP1_PERIPH_FLASH + * @arg LL_AHB1_GRP1_PERIPH_GPIOA + * @arg LL_AHB1_GRP1_PERIPH_GPIOB + * @arg LL_AHB1_GRP1_PERIPH_SRAM0 + * @arg LL_AHB1_GRP1_PERIPH_SRAM1 + * @arg LL_AHB1_GRP1_PERIPH_CRC + * @arg LL_AHB1_GRP1_PERIPH_RNG + * @arg LL_AHB1_GRP1_PERIPH_AES + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClockSleepMode(uint32_t Periphs) +{ + return ((READ_BIT(RCC->AHBSMENR, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable AHB peripherals clock in Sleep Mode + * @rmtoll AHBENR DMAENN LL_AHB1_GRP1_DisableClock + * AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock + * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock + * AHBENR SRAM0EN LL_AHB1_GRP1_DisableClock + * AHBENR SRMA1EN LL_AHB1_GRP1_DisableClock + * AHBENR CRCEN LL_AHB1_GRP1_DisableClock + * AHBENR RNGEN LL_AHB1_GRP1_DisableClock + * AHBENR AESEN LL_AHB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_AHB1_GRP1_PERIPH_DMA + * @arg LL_AHB1_GRP1_PERIPH_FLASH + * @arg LL_AHB1_GRP1_PERIPH_GPIOA + * @arg LL_AHB1_GRP1_PERIPH_GPIOB + * @arg LL_AHB1_GRP1_PERIPH_SRAM0 + * @arg LL_AHB1_GRP1_PERIPH_SRAM1 + * @arg LL_AHB1_GRP1_PERIPH_CRC + * @arg LL_AHB1_GRP1_PERIPH_RNG + * @arg LL_AHB1_GRP1_PERIPH_AES + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleepMode(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBSMENR, Periphs); +} + +/** + * @brief Force AHB peripherals reset. + * @rmtoll AHBRSTR DMARST LL_AHB1_GRP1_ForceReset + * AHBRSTR GPIOARST LL_AHB1_GRP1_ForceReset + * AHBRSTR GPIOBRST LL_AHB1_GRP1_ForceReset + * AHBRSTR CRCRST LL_AHB1_GRP1_ForceReset + * AHBRSTR RNGRST LL_AHB1_GRP1_ForceReset + * AHBRSTR AESRST LL_AHB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_AHB1_GRP1_PERIPH_DMA + * @arg LL_AHB1_GRP1_PERIPH_GPIOA + * @arg LL_AHB1_GRP1_PERIPH_GPIOB + * @arg LL_AHB1_GRP1_PERIPH_CRC + * @arg LL_AHB1_GRP1_PERIPH_RNG + * @arg LL_AHB1_GRP1_PERIPH_AES + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->AHBRSTR, Periphs); +} + +/** + * @brief Release AHB peripherals reset. + * @rmtoll AHBRSTR DMARST LL_AHB1_GRP1_ReleaseReset + * AHBRSTR GPIOARST LL_AHB1_GRP1_ReleaseReset + * AHBRSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset + * AHBRSTR CRCRST LL_AHB1_GRP1_ReleaseReset + * AHBRSTR RNGRST LL_AHB1_GRP1_ReleaseReset + * AHBRSTR AESRST LL_AHB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_AHB1_GRP1_PERIPH_DMA + * @arg LL_AHB1_GRP1_PERIPH_GPIOA + * @arg LL_AHB1_GRP1_PERIPH_GPIOB + * @arg LL_AHB1_GRP1_PERIPH_CRC + * @arg LL_AHB1_GRP1_PERIPH_RNG + * @arg LL_AHB1_GRP1_PERIPH_AES + * @retval None + */ +__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->AHBRSTR, Periphs); +} +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB0 APB0 + * @{ + */ + +/** + * @brief Enable APB0 peripherals clock. + * @rmtoll APB0ENR TIM2EN LL_APB0_GRP1_EnableClock + * APB0ENR TIM16EN LL_APB0_GRP1_EnableClock + * APB0ENR SYSCFGEN LL_APB0_GRP1_EnableClock + * APB0ENR LCDEN LL_APB0_GRP1_EnableClock + * APB0ENR COMPEN LL_APB0_GRP1_EnableClock + * APB0ENR DACEN LL_APB0_GRP1_EnableClock + * APB0ENR RTCEN LL_APB0_GRP1_EnableClock + * APB0ENR LCSCEN LL_APB0_GRP1_EnableClock + * APB0ENR WDGEN LL_APB0_GRP1_EnableClock + * APB0ENR DBGMCUEN LL_APB0_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB0_GRP1_PERIPH_TIM2 + * @arg LL_APB0_GRP1_PERIPH_TIM16 + * @arg LL_APB0_GRP1_PERIPH_SYSCFG + * @arg LL_APB0_GRP1_PERIPH_LCDC + * @arg LL_APB0_GRP1_PERIPH_COMP + * @arg LL_APB0_GRP1_PERIPH_DAC + * @arg LL_APB0_GRP1_PERIPH_RTC + * @arg LL_APB0_GRP1_PERIPH_LCSC + * @arg LL_APB0_GRP1_PERIPH_WDG + * @arg LL_APB0_GRP1_PERIPH_DBGMCU + * @retval None + */ +__STATIC_INLINE void LL_APB0_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB0ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB0ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB0 peripheral clock is enabled or not + * @rmtoll APB0ENR TIM2EN LL_APB0_GRP1_EnableClock + * APB0ENR TIM16EN LL_APB0_GRP1_EnableClock + * APB0ENR SYSCFGEN LL_APB0_GRP1_EnableClock + * APB0ENR LCDEN LL_APB0_GRP1_EnableClock + * APB0ENR COMPEN LL_APB0_GRP1_EnableClock + * APB0ENR DACEN LL_APB0_GRP1_EnableClock + * APB0ENR RTCEN LL_APB0_GRP1_EnableClock + * APB0ENR LCSCEN LL_APB0_GRP1_EnableClock + * APB0ENR WDGEN LL_APB0_GRP1_EnableClock + * APB0ENR DBGMCUEN LL_APB0_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB0_GRP1_PERIPH_TIM2 + * @arg LL_APB0_GRP1_PERIPH_TIM16 + * @arg LL_APB0_GRP1_PERIPH_SYSCFG + * @arg LL_APB0_GRP1_PERIPH_LCDC + * @arg LL_APB0_GRP1_PERIPH_COMP + * @arg LL_APB0_GRP1_PERIPH_DAC + * @arg LL_APB0_GRP1_PERIPH_RTC + * @arg LL_APB0_GRP1_PERIPH_LCSC + * @arg LL_APB0_GRP1_PERIPH_WDG + * @arg LL_APB0_GRP1_PERIPH_DBGMCU + * @retval None + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_APB0_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB0ENR, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB0 peripherals clock. + * @rmtoll APB0ENR TIM2EN LL_APB0_GRP1_EnableClock + * APB0ENR TIM16EN LL_APB0_GRP1_EnableClock + * APB0ENR SYSCFGEN LL_APB0_GRP1_EnableClock + * APB0ENR LCDEN LL_APB0_GRP1_EnableClock + * APB0ENR COMPEN LL_APB0_GRP1_EnableClock + * APB0ENR DACEN LL_APB0_GRP1_EnableClock + * APB0ENR RTCEN LL_APB0_GRP1_EnableClock + * APB0ENR LCSCEN LL_APB0_GRP1_EnableClock + * APB0ENR WDGEN LL_APB0_GRP1_EnableClock + * APB0ENR DBGMCUEN LL_APB0_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB0_GRP1_PERIPH_TIM2 + * @arg LL_APB0_GRP1_PERIPH_TIM16 + * @arg LL_APB0_GRP1_PERIPH_SYSCFG + * @arg LL_APB0_GRP1_PERIPH_LCDC + * @arg LL_APB0_GRP1_PERIPH_COMP + * @arg LL_APB0_GRP1_PERIPH_DAC + * @arg LL_APB0_GRP1_PERIPH_RTC + * @arg LL_APB0_GRP1_PERIPH_LCSC + * @arg LL_APB0_GRP1_PERIPH_WDG + * @arg LL_APB0_GRP1_PERIPH_DBGMCU + * @retval None + * @retval None + */ +__STATIC_INLINE void LL_APB0_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB0ENR, Periphs); +} + +/** + * @brief Enable APB0 peripherals clock in sleep mode. + * @rmtoll APB0ENR TIM2EN LL_APB0_GRP1_EnableClock + * APB0ENR TIM16EN LL_APB0_GRP1_EnableClock + * APB0ENR SYSCFGEN LL_APB0_GRP1_EnableClock + * APB0ENR LCDEN LL_APB0_GRP1_EnableClock + * APB0ENR COMPEN LL_APB0_GRP1_EnableClock + * APB0ENR DACEN LL_APB0_GRP1_EnableClock + * APB0ENR RTCEN LL_APB0_GRP1_EnableClock + * APB0ENR LCSCEN LL_APB0_GRP1_EnableClock + * APB0ENR WDGEN LL_APB0_GRP1_EnableClock + * APB0ENR DBGMCUEN LL_APB0_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB0_GRP1_PERIPH_TIM2 + * @arg LL_APB0_GRP1_PERIPH_TIM16 + * @arg LL_APB0_GRP1_PERIPH_SYSCFG + * @arg LL_APB0_GRP1_PERIPH_LCDC + * @arg LL_APB0_GRP1_PERIPH_COMP + * @arg LL_APB0_GRP1_PERIPH_DAC + * @arg LL_APB0_GRP1_PERIPH_RTC + * @arg LL_APB0_GRP1_PERIPH_LCSC + * @arg LL_APB0_GRP1_PERIPH_WDG + * @arg LL_APB0_GRP1_PERIPH_DBGMCU + * @retval None + */ +__STATIC_INLINE void LL_APB0_GRP1_EnableClockSleepMode(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB0SMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB0SMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB0 peripheral clock is enabled in sleep mode or not + * @rmtoll APB0ENR TIM2EN LL_APB0_GRP1_EnableClock + * APB0ENR TIM16EN LL_APB0_GRP1_EnableClock + * APB0ENR SYSCFGEN LL_APB0_GRP1_EnableClock + * APB0ENR LCDEN LL_APB0_GRP1_EnableClock + * APB0ENR COMPEN LL_APB0_GRP1_EnableClock + * APB0ENR DACEN LL_APB0_GRP1_EnableClock + * APB0ENR RTCEN LL_APB0_GRP1_EnableClock + * APB0ENR LCSCEN LL_APB0_GRP1_EnableClock + * APB0ENR WDGEN LL_APB0_GRP1_EnableClock + * APB0ENR DBGMCUEN LL_APB0_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB0_GRP1_PERIPH_TIM2 + * @arg LL_APB0_GRP1_PERIPH_TIM16 + * @arg LL_APB0_GRP1_PERIPH_SYSCFG + * @arg LL_APB0_GRP1_PERIPH_LCDC + * @arg LL_APB0_GRP1_PERIPH_COMP + * @arg LL_APB0_GRP1_PERIPH_DAC + * @arg LL_APB0_GRP1_PERIPH_RTC + * @arg LL_APB0_GRP1_PERIPH_LCSC + * @arg LL_APB0_GRP1_PERIPH_WDG + * @arg LL_APB0_GRP1_PERIPH_DBGMCU + * + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_APB0_GRP1_IsEnabledClockSleepMode(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB0SMENR, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB0 peripherals clock in sleep mode. + * @rmtoll APB0ENR TIM2EN LL_APB0_GRP1_EnableClock + * APB0ENR TIM16EN LL_APB0_GRP1_EnableClock + * APB0ENR SYSCFGEN LL_APB0_GRP1_EnableClock + * APB0ENR LCDEN LL_APB0_GRP1_EnableClock + * APB0ENR COMPEN LL_APB0_GRP1_EnableClock + * APB0ENR DACEN LL_APB0_GRP1_EnableClock + * APB0ENR RTCEN LL_APB0_GRP1_EnableClock + * APB0ENR LCSCEN LL_APB0_GRP1_EnableClock + * APB0ENR WDGEN LL_APB0_GRP1_EnableClock + * APB0ENR DBGMCUEN LL_APB0_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB0_GRP1_PERIPH_TIM2 + * @arg LL_APB0_GRP1_PERIPH_TIM16 + * @arg LL_APB0_GRP1_PERIPH_SYSCFG + * @arg LL_APB0_GRP1_PERIPH_LCDC + * @arg LL_APB0_GRP1_PERIPH_COMP + * @arg LL_APB0_GRP1_PERIPH_DAC + * @arg LL_APB0_GRP1_PERIPH_RTC + * @arg LL_APB0_GRP1_PERIPH_LCSC + * @arg LL_APB0_GRP1_PERIPH_WDG + * @arg LL_APB0_GRP1_PERIPH_DBGMCU + * @retval None + */ +__STATIC_INLINE void LL_APB0_GRP1_DisableClockSleepMode(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB0SMENR, Periphs); +} + +/** + * @brief Force APB0 peripherals reset. + * @rmtoll APB0RSTR TIM2RST LL_APB0_GRP1_ForceReset + * APB0RSTR TIM16RST LL_APB0_GRP1_ForceReset + * APB0RSTR SYSCFGRST LL_APB0_GRP1_ForceReset + * APB0RSTR LCDRST LL_APB0_GRP1_ForceReset + * APB0RSTR COMPRST LL_APB0_GRP1_ForceReset + * APB0RSTR DACRST LL_APB0_GRP1_ForceReset + * APB0RSTR RTCRST LL_APB0_GRP1_ForceReset + * APB0RSTR LCSCRST LL_APB0_GRP1_ForceReset + * APB0RSTR WDGRST LL_APB0_GRP1_ForceReset + * APB0RSTR DBGMCURST LL_APB0_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB0_GRP1_PERIPH_TIM2 + * @arg LL_APB0_GRP1_PERIPH_TIM16 + * @arg LL_APB0_GRP1_PERIPH_SYSCFG + * @arg LL_APB0_GRP1_PERIPH_LCDC + * @arg LL_APB0_GRP1_PERIPH_COMP + * @arg LL_APB0_GRP1_PERIPH_DAC + * @arg LL_APB0_GRP1_PERIPH_RTC + * @arg LL_APB0_GRP1_PERIPH_LCSC + * @arg LL_APB0_GRP1_PERIPH_WDG + * @arg LL_APB0_GRP1_PERIPH_DBGMCU + * @retval None + */ +__STATIC_INLINE void LL_APB0_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB0RSTR, Periphs); +} + +/** + * @brief Release APB0 peripherals reset. + * @rmtoll APB0RSTR TIM2RST LL_APB0_GRP1_ForceReset + * APB0RSTR TIM16RST LL_APB0_GRP1_ForceReset + * APB0RSTR SYSCFGRST LL_APB0_GRP1_ForceReset + * APB0RSTR LCDRST LL_APB0_GRP1_ForceReset + * APB0RSTR COMPRST LL_APB0_GRP1_ForceReset + * APB0RSTR DACRST LL_APB0_GRP1_ForceReset + * APB0RSTR RTCRST LL_APB0_GRP1_ForceReset + * APB0RSTR LCSCRST LL_APB0_GRP1_ForceReset + * APB0RSTR WDGRST LL_APB0_GRP1_ForceReset + * APB0RSTR DBGMCURST LL_APB0_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB0_GRP1_PERIPH_TIM2 + * @arg LL_APB0_GRP1_PERIPH_TIM16 + * @arg LL_APB0_GRP1_PERIPH_SYSCFG + * @arg LL_APB0_GRP1_PERIPH_LCDC + * @arg LL_APB0_GRP1_PERIPH_COMP + * @arg LL_APB0_GRP1_PERIPH_DAC + * @arg LL_APB0_GRP1_PERIPH_RTC + * @arg LL_APB0_GRP1_PERIPH_LCSC + * @arg LL_APB0_GRP1_PERIPH_WDG + * @arg LL_APB0_GRP1_PERIPH_DBGMCU + * @retval None + */ +__STATIC_INLINE void LL_APB0_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB0RSTR, Periphs); +} +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB1 APB1 + * @{ + */ + +/** + * @brief Enable APB1 peripherals clock. + * @rmtoll APB1ENR SPI1EN LL_APB1_GRP1_EnableClock + * APB1ENR ADCDIGEN LL_APB1_GRP1_EnableClock + * APB1ENR ADCANAEN LL_APB1_GRP1_EnableClock + * APB1ENR LPUARTEN LL_APB1_GRP1_EnableClock + * APB1ENR USARTEN LL_APB1_GRP1_EnableClock + * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock + * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock + * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB1_GRP1_PERIPH_SPI1 + * @arg LL_APB1_GRP1_PERIPH_ADCDIG + * @arg LL_APB1_GRP1_PERIPH_ADCANA + * @arg LL_APB1_GRP1_PERIPH_LPUART1 + * @arg LL_APB1_GRP1_PERIPH_USART1 + * @arg LL_APB1_GRP1_PERIPH_SPI3 + * @arg LL_APB1_GRP1_PERIPH_I2C1 + * @arg LL_APB1_GRP1_PERIPH_I2C2 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not + * @rmtoll APB1ENR SPI1EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR ADCDIGEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR ADCANAEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR LPUARTEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR USARTEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB1_GRP1_PERIPH_SPI1 + * @arg LL_APB1_GRP1_PERIPH_ADCDIG + * @arg LL_APB1_GRP1_PERIPH_ADCANA + * @arg LL_APB1_GRP1_PERIPH_LPUART1 + * @arg LL_APB1_GRP1_PERIPH_USART1 + * @arg LL_APB1_GRP1_PERIPH_SPI3 + * @arg LL_APB1_GRP1_PERIPH_I2C1 + * @arg LL_APB1_GRP1_PERIPH_I2C2 + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB1ENR, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB1 peripherals clock. + * @rmtoll APB1ENR SPI1EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR ADCDIGEN LL_APB1_GRP1_DisableClock + * APB1ENR ADCANAEN LL_APB1_GRP1_DisableClock + * APB1ENR LPUARTEN LL_APB1_GRP1_DisableClock + * APB1ENR USARTEN LL_APB1_GRP1_DisableClock + * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock + * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock + * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB1_GRP1_PERIPH_SPI1 + * @arg LL_APB1_GRP1_PERIPH_ADCDIG + * @arg LL_APB1_GRP1_PERIPH_ADCANA + * @arg LL_APB1_GRP1_PERIPH_LPUART1 + * @arg LL_APB1_GRP1_PERIPH_USART1 + * @arg LL_APB1_GRP1_PERIPH_SPI3 + * @arg LL_APB1_GRP1_PERIPH_I2C1 + * @arg LL_APB1_GRP1_PERIPH_I2C2 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1ENR, Periphs); +} + +/** + * @brief Enable APB1 peripherals clock in sleep mode. + * @rmtoll APB1ENR SPI1EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR ADCDIGEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR LPUARTEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR USARTEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB1_GRP1_PERIPH_SPI1 + * @arg LL_APB1_GRP1_PERIPH_ADCDIG + * @arg LL_APB1_GRP1_PERIPH_LPUART1 + * @arg LL_APB1_GRP1_PERIPH_USART1 + * @arg LL_APB1_GRP1_PERIPH_SPI3 + * @arg LL_APB1_GRP1_PERIPH_I2C1 + * @arg LL_APB1_GRP1_PERIPH_I2C2 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_EnableClockSleepMode(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB1SMENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB1SMENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB1 peripheral clock is enabled or not in sleep mode. + * @rmtoll APB1ENR SPI1EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR ADCDIGEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR LPUARTEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR USARTEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB1_GRP1_PERIPH_SPI1 + * @arg LL_APB1_GRP1_PERIPH_ADCDIG + * @arg LL_APB1_GRP1_PERIPH_LPUART1 + * @arg LL_APB1_GRP1_PERIPH_USART1 + * @arg LL_APB1_GRP1_PERIPH_SPI3 + * @arg LL_APB1_GRP1_PERIPH_I2C1 + * @arg LL_APB1_GRP1_PERIPH_I2C2 + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClockSleepMode(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB1SMENR, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB1 peripherals clock in sleep mode. + * @rmtoll APB1ENR SPI1EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR ADCDIGEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR LPUARTEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR USARTEN LL_APB1_GRP1_IsEnabledClock + * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock + * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB1_GRP1_PERIPH_SPI1 + * @arg LL_APB1_GRP1_PERIPH_ADCDIG + * @arg LL_APB1_GRP1_PERIPH_LPUART1 + * @arg LL_APB1_GRP1_PERIPH_USART1 + * @arg LL_APB1_GRP1_PERIPH_SPI3 + * @arg LL_APB1_GRP1_PERIPH_I2C1 + * @arg LL_APB1_GRP1_PERIPH_I2C2 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_DisableClockSleepMode(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1SMENR, Periphs); +} + +/** + * @brief Force APB1 peripherals reset. + * @rmtoll APB1RSTR SPI1RST LL_APB1_GRP1_ForceReset + * APB1RSTR ADCRST LL_APB1_GRP1_ForceReset + * APB1RSTR LPUARTRST LL_APB1_GRP1_ForceReset + * APB1RSTR USARTRST LL_APB1_GRP1_ForceReset + * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset + * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset + * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB1_GRP1_PERIPH_ALL + * @arg LL_APB1_GRP1_PERIPH_SPI1 + * @arg LL_APB1_GRP1_PERIPH_ADCDIG + * @arg LL_APB1_GRP1_PERIPH_LPUART1 + * @arg LL_APB1_GRP1_PERIPH_USART1 + * @arg LL_APB1_GRP1_PERIPH_SPI3 + * @arg LL_APB1_GRP1_PERIPH_I2C1 + * @arg LL_APB1_GRP1_PERIPH_I2C2 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB1RSTR, Periphs); +} + +/** + * @brief Release APB1 peripherals reset. + * @rmtoll APB1RSTR SPI1RST LL_APB1_GRP1_ReleaseReset + * APB1RSTR ADCRST LL_APB1_GRP1_ReleaseReset + * APB1RSTR LPUARTRST LL_APB1_GRP1_ReleaseReset + * APB1RSTR USARTRST LL_APB1_GRP1_ReleaseReset + * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset + * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset + * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB1_GRP1_PERIPH_ALL + * @arg LL_APB1_GRP1_PERIPH_SPI1 + * @arg LL_APB1_GRP1_PERIPH_ADCDIG + * @arg LL_APB1_GRP1_PERIPH_LPUART1 + * @arg LL_APB1_GRP1_PERIPH_USART1 + * @arg LL_APB1_GRP1_PERIPH_SPI3 + * @arg LL_APB1_GRP1_PERIPH_I2C1 + * @arg LL_APB1_GRP1_PERIPH_I2C2 + * @retval None + */ +__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB1RSTR, Periphs); +} +/** + * @} + */ + +/** @defgroup BUS_LL_EF_APB2 APB2 + * @{ + */ +/** + * @brief Enable APB2 peripherals clock. + * @rmtoll APB2ENR MRSUBGEN LL_APB2_GRP1_EnableClock + * @rmtoll APB2ENR LPAWUREN LL_APB2_GRP1_EnableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB2_GRP1_PERIPH_MRSUBG + * @arg LL_APB2_GRP1_PERIPH_LPAWUR + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) +{ + __IO uint32_t tmpreg; + SET_BIT(RCC->APB2ENR, Periphs); + /* Delay after an RCC peripheral clock enabling */ + tmpreg = READ_BIT(RCC->APB2ENR, Periphs); + (void)tmpreg; +} + +/** + * @brief Check if APB2 peripheral clock is enabled or not + * @rmtoll APB2ENR MRSUBGEN LL_APB2_GRP1_IsEnabledClock + * @rmtoll APB2ENR LPAWUREN LL_APB2_GRP1_IsEnabledClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB2_GRP1_PERIPH_MRSUBG + * @arg LL_APB2_GRP1_PERIPH_LPAWUR + * @retval uint32_t + */ +__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) +{ + return ((READ_BIT(RCC->APB2ENR, Periphs) == (Periphs)) ? 1UL : 0UL); +} + +/** + * @brief Disable APB2 peripherals clock. + * @rmtoll APB2ENR MRSUBGEN LL_APB2_GRP1_DisableClock + * @rmtoll APB2ENR LPAWUREN LL_APB2_GRP1_DisableClock + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB2_GRP1_PERIPH_MRSUBG + * @arg LL_APB2_GRP1_PERIPH_LPAWUR + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2ENR, Periphs); +} + +/** + * @brief Force APB2 peripherals reset. + * @rmtoll APB2RSTR MRSUBGRST LL_APB2_GRP1_ForceReset + * @rmtoll APB2RSTR LPAWURRST LL_APB2_GRP1_ForceReset + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB2_GRP1_PERIPH_MRSUBG + * @arg LL_APB2_GRP1_PERIPH_LPAWUR + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) +{ + SET_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @brief Release APB2 peripherals reset. + * @rmtoll APB2RSTR MRSUBGRST LL_APB2_GRP1_ReleaseReset + * @rmtoll APB2RSTR LPAWURRST LL_APB2_GRP1_ReleaseReset + * @param Periphs This parameter can be a combination of the following values: + * @arg LL_APB2_GRP1_PERIPH_MRSUBG + * @arg LL_APB2_GRP1_PERIPH_LPAWUR + * @retval None + */ +__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) +{ + CLEAR_BIT(RCC->APB2RSTR, Periphs); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_BUS_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_comp.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_comp.h new file mode 100644 index 0000000000..3681e32e7c --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_comp.h @@ -0,0 +1,718 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_comp.h + * @author MCD Application Team + * @brief Header file of COMP LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_COMP_H +#define STM32WL3x_LL_COMP_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (COMP1) + +/** @defgroup COMP_LL COMP + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup COMP_LL_Private_Constants COMP Private Constants + * @{ + */ + +/* COMP registers bits positions */ +#define LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS COMP_CSR_VALUE_Pos + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup COMP_LL_Private_Macros COMP Private Macros + * @{ + */ + +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup COMP_LL_ES_INIT COMP Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of COMP instance. + */ +typedef struct +{ + uint32_t PowerMode; /*!< Set comparator operating mode to adjust power and speed. + This parameter can be a value of @ref COMP_LL_EC_POWERMODE + This feature can be modified afterwards using unitary + function @ref LL_COMP_SetPowerMode(). */ + + uint32_t InputPlus; /*!< Set comparator input plus (non-inverting input). + This parameter can be a value of @ref COMP_LL_EC_INPUT_PLUS + This feature can be modified afterwards using unitary function + @ref LL_COMP_SetInputPlus(). */ + + uint32_t InputMinus; /*!< Set comparator input minus (inverting input). + This parameter can be a value of @ref COMP_LL_EC_INPUT_MINUS + This feature can be modified afterwards using unitary function + @ref LL_COMP_SetInputMinus(). */ + + uint32_t InputHysteresis; /*!< Set comparator hysteresis mode of the input minus. + This parameter can be a value of @ref COMP_LL_EC_INPUT_HYSTERESIS + This feature can be modified afterwards using unitary function + @ref LL_COMP_SetInputHysteresis(). */ + + uint32_t OutputPolarity; /*!< Set comparator output polarity. + This parameter can be a value of @ref COMP_LL_EC_OUTPUT_POLARITY + This feature can be modified afterwards using unitary function + @ref LL_COMP_SetOutputPolarity(). */ + + uint32_t OutputBlankingSource; /*!< Set comparator blanking source. + This parameter can be a value of @ref COMP_LL_EC_OUTPUT_BLANKING_SOURCE + This feature can be modified afterwards using unitary function + @ref LL_COMP_SetOutputBlankingSource(). */ + +} LL_COMP_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup COMP_LL_Exported_Constants COMP Exported Constants + * @{ + */ + + +/** @defgroup COMP_LL_EC_POWERMODE Comparator modes - Power mode + * @{ + */ +#define LL_COMP_POWERMODE_HIGHSPEED (0x00000000UL) /*!< COMP power mode to high speed */ +#define LL_COMP_POWERMODE_MEDIUMSPEED (COMP_CSR_PWRMODE_0) /*!< COMP power mode to medium speed */ +#define LL_COMP_POWERMODE_ULTRALOWPOWER (COMP_CSR_PWRMODE_1 | COMP_CSR_PWRMODE_0) /*!< COMP power mode to ultra-low power */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_INPUT_PLUS Comparator inputs - Input plus (input non-inverting) selection + * @{ + */ +#if defined(COMP_CSR_INPSEL) +#define LL_COMP_INPUT_PLUS_IO1 (0x00000000UL) /*!< Comparator input plus connected to IO1 (pin PA14 for COMP1). */ +#define LL_COMP_INPUT_PLUS_IO2 (COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO2 (pin PB1 for COMP1) */ +#define LL_COMP_INPUT_PLUS_IO3 (COMP_CSR_INPSEL_1) /*!< Comparator input plus connected to IO3 (pin PB2 for COMP1) */ +#endif /* COMP_CSR_INPSEL */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_INPUT_MINUS Comparator inputs - Input minus (input inverting) selection + * @{ + */ +#define LL_COMP_INPUT_MINUS_1_4VREFINT ( COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 1/4 VrefInt */ +#define LL_COMP_INPUT_MINUS_1_2VREFINT ( COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 1/2 VrefInt */ +#define LL_COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 3/4 VrefInt */ +#define LL_COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN ) /*!< Comparator input minus connected to VrefInt */ +#define LL_COMP_INPUT_MINUS_DAC1_CH1 (COMP_CSR_INMSEL_2 ) /*!< Comparator input minus connected to DAC channel 1 (DAC_OUT1) */ +#if defined(COMP_CSR_INMSEL) +#define LL_COMP_INPUT_MINUS_IO1 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO1 (pin PA13 for COMP1) */ +#define LL_COMP_INPUT_MINUS_IO2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to IO2 (pin PB0 for COMP1) */ +#define LL_COMP_INPUT_MINUS_IO3 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO3 (pin PB3 for COMP1) */ +#endif /* COMP_CSR_INMSEL */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_INPUT_HYSTERESIS Comparator input - Hysteresis + * @{ + */ +#define LL_COMP_HYSTERESIS_NONE (0x00000000UL) /*!< No hysteresis */ +#define LL_COMP_HYSTERESIS_LOW ( COMP_CSR_HYST_0) /*!< Hysteresis level low */ +#define LL_COMP_HYSTERESIS_MEDIUM (COMP_CSR_HYST_1 ) /*!< Hysteresis level medium */ +#define LL_COMP_HYSTERESIS_HIGH (COMP_CSR_HYST_1 | COMP_CSR_HYST_0) /*!< Hysteresis level high */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_OUTPUT_POLARITY Comparator output - Output polarity + * @{ + */ +#define LL_COMP_OUTPUTPOL_NONINVERTED (0x00000000UL) /*!< COMP output polarity is not inverted: comparator output is high when the plus (non-inverting) input is at a higher voltage than the minus (inverting) input */ +#define LL_COMP_OUTPUTPOL_INVERTED (COMP_CSR_POLARITY) /*!< COMP output polarity is inverted: comparator output is low when the plus (non-inverting) input is at a lower voltage than the minus (inverting) input */ +/** + * @} + */ + +/** @defgroup COMP_LL_EC_OUTPUT_BLANKING_SOURCE Comparator output - Blanking source + * @{ + */ +#define LL_COMP_BLANKINGSRC_NONE (0x00000000UL) /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in COMP register + * @param __INSTANCE__ comparator instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_COMP_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** @defgroup COMP_LL_EM_HELPER_MACRO COMP helper macro + * @{ + */ + +/** + * @brief Helper macro to select the COMP common instance + * to which is belonging the selected COMP instance. + * @note COMP common register instance can be used to + * set parameters common to several COMP instances. + * Refer to functions having argument "COMPxy_COMMON" as parameter. + * @param __COMPx__ COMP instance + * @retval COMP common instance or value "0" if there is no COMP common instance. + */ +#define __LL_COMP_COMMON_INSTANCE(__COMPx__) (COMP12_COMMON) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup COMP_LL_Exported_Functions COMP Exported Functions + * @{ + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_modes Configuration of comparator modes + * @{ + */ + +/** + * @brief Set comparator instance operating mode to adjust power and speed. + * @rmtoll CSR PWRMODE LL_COMP_SetPowerMode + * @param COMPx Comparator instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_COMP_POWERMODE_HIGHSPEED + * @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED + * @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetPowerMode(COMP_TypeDef *COMPx, uint32_t PowerMode) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_PWRMODE, PowerMode); +} + +/** + * @brief Get comparator instance operating mode to adjust power and speed. + * @rmtoll CSR PWRMODE LL_COMP_GetPowerMode + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_POWERMODE_HIGHSPEED + * @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED + * @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER + */ +__STATIC_INLINE uint32_t LL_COMP_GetPowerMode(const COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_PWRMODE)); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_inputs Configuration of comparator inputs + * @{ + */ + +/** + * @brief Set comparator inputs minus (inverting) and plus (non-inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @note On this STM32 series, scaler bridge is configurable: + * to optimize power consumption, this function enables the + * voltage scaler bridge only when required + * (when selecting comparator input based on VrefInt: VrefInt or + * subdivision of VrefInt). + * - For scaler bridge power consumption values, + * refer to device datasheet, parameter "IDDA(SCALER)". + * - Voltage scaler requires a delay for voltage stabilization. + * Refer to device datasheet, parameter "tSTART_SCALER". + * - Scaler bridge is common for all comparator instances, + * therefore if at least one of the comparator instance + * is requiring the scaler bridge, it remains enabled. + * @rmtoll CSR INMSEL LL_COMP_ConfigInputs\n + * CSR INPSEL LL_COMP_ConfigInputs\n + * CSR BRGEN LL_COMP_ConfigInputs\n + * CSR SCALEN LL_COMP_ConfigInputs + * @param COMPx Comparator instance + * @param InputMinus This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1 + * @arg @ref LL_COMP_INPUT_MINUS_IO1 + * @arg @ref LL_COMP_INPUT_MINUS_IO2 + * @arg @ref LL_COMP_INPUT_MINUS_IO3 + * @param InputPlus This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_PLUS_IO1 (*) + * @arg @ref LL_COMP_INPUT_PLUS_IO2 + * @arg @ref LL_COMP_INPUT_PLUS_IO3 (*) + * + * (*) Parameter not available on all devices. + * @retval None + */ +__STATIC_INLINE void LL_COMP_ConfigInputs(COMP_TypeDef *COMPx, uint32_t InputMinus, uint32_t InputPlus) +{ + MODIFY_REG(COMPx->CSR, + COMP_CSR_INMSEL | COMP_CSR_INPSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN, + InputMinus | InputPlus); +} + +/** + * @brief Set comparator input plus (non-inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll CSR INPSEL LL_COMP_SetInputPlus + * @param COMPx Comparator instance + * @param InputPlus This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_PLUS_IO1 + * @arg @ref LL_COMP_INPUT_PLUS_IO2 + * @arg @ref LL_COMP_INPUT_PLUS_IO3 (*) + * + * (*) Parameter not available on all devices. + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetInputPlus(COMP_TypeDef *COMPx, uint32_t InputPlus) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_INPSEL, InputPlus); +} + +/** + * @brief Get comparator input plus (non-inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll CSR INPSEL LL_COMP_GetInputPlus + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_INPUT_PLUS_IO1 (*) + * @arg @ref LL_COMP_INPUT_PLUS_IO2 + * @arg @ref LL_COMP_INPUT_PLUS_IO3 (*) + * + * (*) Parameter not available on all devices. + */ +__STATIC_INLINE uint32_t LL_COMP_GetInputPlus(const COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INPSEL)); +} + +/** + * @brief Set comparator input minus (inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @note On this STM32 series, scaler bridge is configurable: + * to optimize power consumption, this function enables the + * voltage scaler bridge only when required + * (when selecting comparator input based on VrefInt: VrefInt or + * subdivision of VrefInt). + * - For scaler bridge power consumption values, + * refer to device datasheet, parameter "IDDA(SCALER)". + * - Voltage scaler requires a delay for voltage stabilization. + * Refer to device datasheet, parameter "tSTART_SCALER". + * - Scaler bridge is common for all comparator instances, + * therefore if at least one of the comparator instance + * is requiring the scaler bridge, it remains enabled. + * @rmtoll CSR INMSEL LL_COMP_SetInputMinus\n + * CSR BRGEN LL_COMP_SetInputMinus\n + * CSR SCALEN LL_COMP_SetInputMinus + * @param COMPx Comparator instance + * @param InputMinus This parameter can be one of the following values: + * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1 + * @arg @ref LL_COMP_INPUT_MINUS_IO1 + * @arg @ref LL_COMP_INPUT_MINUS_IO2 + * @arg @ref LL_COMP_INPUT_MINUS_IO3 + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetInputMinus(COMP_TypeDef *COMPx, uint32_t InputMinus) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN, InputMinus); +} + +/** + * @brief Get comparator input minus (inverting). + * @note In case of comparator input selected to be connected to IO: + * GPIO pins are specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll CSR INMSEL LL_COMP_GetInputMinus\n + * CSR BRGEN LL_COMP_GetInputMinus\n + * CSR SCALEN LL_COMP_GetInputMinus + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_VREFINT + * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1 + * @arg @ref LL_COMP_INPUT_MINUS_IO1 + * @arg @ref LL_COMP_INPUT_MINUS_IO2 + * @arg @ref LL_COMP_INPUT_MINUS_IO3 + */ +__STATIC_INLINE uint32_t LL_COMP_GetInputMinus(const COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN)); +} + +/** + * @brief Set comparator instance hysteresis mode of the input minus (inverting input). + * @rmtoll CSR HYST LL_COMP_SetInputHysteresis + * @param COMPx Comparator instance + * @param InputHysteresis This parameter can be one of the following values: + * @arg @ref LL_COMP_HYSTERESIS_NONE + * @arg @ref LL_COMP_HYSTERESIS_LOW + * @arg @ref LL_COMP_HYSTERESIS_MEDIUM + * @arg @ref LL_COMP_HYSTERESIS_HIGH + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetInputHysteresis(COMP_TypeDef *COMPx, uint32_t InputHysteresis) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_HYST, InputHysteresis); +} + +/** + * @brief Get comparator instance hysteresis mode of the minus (inverting) input. + * @rmtoll CSR HYST LL_COMP_GetInputHysteresis + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_HYSTERESIS_NONE + * @arg @ref LL_COMP_HYSTERESIS_LOW + * @arg @ref LL_COMP_HYSTERESIS_MEDIUM + * @arg @ref LL_COMP_HYSTERESIS_HIGH + */ +__STATIC_INLINE uint32_t LL_COMP_GetInputHysteresis(const COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_HYST)); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Configuration_comparator_output Configuration of comparator output + * @{ + */ + +/** + * @brief Set comparator instance output polarity. + * @rmtoll CSR POLARITY LL_COMP_SetOutputPolarity + * @param COMPx Comparator instance + * @param OutputPolarity This parameter can be one of the following values: + * @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED + * @arg @ref LL_COMP_OUTPUTPOL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetOutputPolarity(COMP_TypeDef *COMPx, uint32_t OutputPolarity) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_POLARITY, OutputPolarity); +} + +/** + * @brief Get comparator instance output polarity. + * @rmtoll CSR POLARITY LL_COMP_GetOutputPolarity + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED + * @arg @ref LL_COMP_OUTPUTPOL_INVERTED + */ +__STATIC_INLINE uint32_t LL_COMP_GetOutputPolarity(const COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_POLARITY)); +} + +/** + * @brief Set comparator instance blanking source. + * @note Blanking source may be specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @note Availability of parameters of blanking source from timer + * depends on timers availability on the selected device. + * @rmtoll CSR BLANKING LL_COMP_SetOutputBlankingSource + * @param COMPx Comparator instance + * @param BlankingSource This parameter can be one of the following values: + * @arg @ref LL_COMP_BLANKINGSRC_NONE + * @arg @ref LL_COMP_BLANKINGSRC_TIM1_OC5 (1) + * @arg @ref LL_COMP_BLANKINGSRC_TIM2_OC3 (1) + * + * (1) Parameter availability depending on timer availability + * on the selected device. + * @retval None + */ +__STATIC_INLINE void LL_COMP_SetOutputBlankingSource(COMP_TypeDef *COMPx, uint32_t BlankingSource) +{ + MODIFY_REG(COMPx->CSR, COMP_CSR_BLANKING, BlankingSource); +} + +/** + * @brief Get comparator instance blanking source. + * @note Availability of parameters of blanking source from timer + * depends on timers availability on the selected device. + * @note Blanking source may be specific to each comparator instance. + * Refer to description of parameters or to reference manual. + * @rmtoll CSR BLANKING LL_COMP_GetOutputBlankingSource + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_BLANKINGSRC_NONE + * @arg @ref LL_COMP_BLANKINGSRC_TIM1_OC5 (1) + * @arg @ref LL_COMP_BLANKINGSRC_TIM2_OC3 (1) + * + * (1) Parameter availability depending on timer availability + * on the selected device. + */ +__STATIC_INLINE uint32_t LL_COMP_GetOutputBlankingSource(const COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_BLANKING)); +} + +/** + * @} + */ + +/** @defgroup COMP_LL_EF_Operation Operation on comparator instance + * @{ + */ + +/** + * @brief Enable comparator instance. + * @note After enable from off state, comparator requires a delay + * to reach reach propagation delay specification. + * Refer to device datasheet, parameter "tSTART". + * @rmtoll CSR EN LL_COMP_Enable + * @param COMPx Comparator instance + * @retval None + */ +__STATIC_INLINE void LL_COMP_Enable(COMP_TypeDef *COMPx) +{ + SET_BIT(COMPx->CSR, COMP_CSR_EN); +} + +/** + * @brief Disable comparator instance. + * @rmtoll CSR EN LL_COMP_Disable + * @param COMPx Comparator instance + * @retval None + */ +__STATIC_INLINE void LL_COMP_Disable(COMP_TypeDef *COMPx) +{ + CLEAR_BIT(COMPx->CSR, COMP_CSR_EN); +} + +/** + * @brief Get comparator enable state + * (0: COMP is disabled, 1: COMP is enabled) + * @rmtoll CSR EN LL_COMP_IsEnabled + * @param COMPx Comparator instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_COMP_IsEnabled(const COMP_TypeDef *COMPx) +{ + return ((READ_BIT(COMPx->CSR, COMP_CSR_EN) == (COMP_CSR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Lock comparator instance. + * @note Once locked, comparator configuration can be accessed in read-only. + * @note The only way to unlock the comparator is a device hardware reset. + * @rmtoll CSR LOCK LL_COMP_Lock + * @param COMPx Comparator instance + * @retval None + */ +__STATIC_INLINE void LL_COMP_Lock(COMP_TypeDef *COMPx) +{ + SET_BIT(COMPx->CSR, COMP_CSR_LOCK); +} + +/** + * @brief Get comparator lock state + * (0: COMP is unlocked, 1: COMP is locked). + * @note Once locked, comparator configuration can be accessed in read-only. + * @note The only way to unlock the comparator is a device hardware reset. + * @rmtoll CSR LOCK LL_COMP_IsLocked + * @param COMPx Comparator instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_COMP_IsLocked(const COMP_TypeDef *COMPx) +{ + return ((READ_BIT(COMPx->CSR, COMP_CSR_LOCK) == (COMP_CSR_LOCK)) ? 1UL : 0UL); +} + +/** + * @brief Read comparator instance output level. + * @note The comparator output level depends on the selected polarity + * (Refer to function @ref LL_COMP_SetOutputPolarity()). + * If the comparator polarity is not inverted: + * - Comparator output is low when the input plus + * is at a lower voltage than the input minus + * - Comparator output is high when the input plus + * is at a higher voltage than the input minus + * If the comparator polarity is inverted: + * - Comparator output is high when the input plus + * is at a lower voltage than the input minus + * - Comparator output is low when the input plus + * is at a higher voltage than the input minus + * @rmtoll CSR VALUE LL_COMP_ReadOutputLevel + * @param COMPx Comparator instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_COMP_OUTPUT_LEVEL_LOW + * @arg @ref LL_COMP_OUTPUT_LEVEL_HIGH + */ +__STATIC_INLINE uint32_t LL_COMP_ReadOutputLevel(const COMP_TypeDef *COMPx) +{ + return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_VALUE) + >> LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup COMP_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx); +ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, const LL_COMP_InitTypeDef *COMP_InitStruct); +void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* COMP1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_COMP_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_cortex.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_cortex.h new file mode 100644 index 0000000000..a75dcdaf43 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_cortex.h @@ -0,0 +1,578 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_cortex.h + * @author MCD Application Team + * @brief Header file of CORTEX LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL CORTEX driver contains a set of generic APIs that can be + used by user: + (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick + functions + (+) Low power mode configuration (SCB register of Cortex-MCU) + (+) MPU API to configure and enable regions + (+) API to access to MCU info (CPUID register) + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_CORTEX_H +#define STM32WL3x_LL_CORTEX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +/** @defgroup CORTEX_LL CORTEX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants + * @{ + */ + +/** @defgroup CORTEX_LL_EC_CLKSOURCE_SYSCLK SYSTICK Clock Source + * @{ + */ +#define LL_SYSTICK_CLKSOURCE_SYSCLK SysTick_CTRL_CLKSOURCE_Msk /*!< System clock selected as SysTick clock source. */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EX_NVIC_IRQ_PRIORITY NVIC IRQ Priority + * @{ + */ + +#define LL_NVIC_CRITICAL_PRIORITY 0 + +#define LL_NVIC_HIGH_PRIORITY 1 + +#define LL_NVIC_MED_PRIORITY 2 + +#define LL_NVIC_LOW_PRIORITY 3 + +/** + * @} + */ + +#if __MPU_PRESENT + +/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control + * @{ + */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */ +#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */ +#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */ +#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION MPU Region Number + * @{ + */ +#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */ +#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */ +#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */ +#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */ +#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */ +#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */ +#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */ +#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size + * @{ + */ +#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */ +#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges + * @{ + */ +#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/ +#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/ +#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */ +#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */ +#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/ +#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level + * @{ + */ +#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */ +#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */ +#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */ +#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access + * @{ + */ +#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */ +#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access + * @{ + */ +#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */ +#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access + * @{ + */ +#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */ +#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */ +/** + * @} + */ + +/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access + * @{ + */ +#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */ +#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */ +/** + * @} + */ +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions + * @{ + */ + +/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK + * @{ + */ + +/** + * @brief This function configures the Systick counter. + * @rmtoll LL_SYSTICK_Config + * @param ticks Number of ticks between two interrupts. + * @retval None. + */ +__STATIC_INLINE void LL_SYSTICK_Config(uint32_t ticks) +{ + SysTick_Config(ticks); +} + +/** + * @brief This function enable the Systick counter. + * @rmtoll STK_CTRL ENABLE LL_SYSTICK_Enable + * @retval None. + */ +__STATIC_INLINE void LL_SYSTICK_Enable(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_ENABLE_Msk); +} + +/** + * @brief This function disable the Systick counter. + * @rmtoll STK_CTRL DISABLE LL_SYSTICK_Disable + * @retval None. + */ +__STATIC_INLINE void LL_SYSTICK_Disable(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_ENABLE_Msk); +} + +/** + * @brief This function checks if the Systick counter flag is active or not. + * @note It can be used in timeout function on application side. + * @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void) +{ + return (((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Configures the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_SYSCLK + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source) +{ + SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_SYSCLK); +} + +/** + * @brief Get the SysTick clock source + * @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_SYSTICK_CLKSOURCE_SYSCLK + */ +__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void) +{ + return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_SYSCLK); +} + +/** + * @brief Enable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_EnableIT(void) +{ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Disable SysTick exception request + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT + * @retval None + */ +__STATIC_INLINE void LL_SYSTICK_DisableIT(void) +{ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Checks if the SYSTICK interrupt is enabled or disabled. + * @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void) +{ + return ((READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE + * @{ + */ + +/** + * @brief Processor uses sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableSleep(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @brief Processor uses deep sleep as its low power mode + * @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep + * @retval None + */ +__STATIC_INLINE void LL_LPM_EnableDeepSleep(void) +{ + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +} + +/** + * @} + */ + +/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO + * @{ + */ + +/** + * @brief Get Implementer code + * @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer + * @retval Value should be equal to 0x41 for ARM + */ +__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos); +} + +/** + * @brief Get Variant number (The r value in the rnpn product revision identifier) + * @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant + * @retval Value between 0 and 255 (0x0: revision 0) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos); +} + +/** + * @brief Get Constant number + * @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant + * @retval Value should be equal to 0xC for Cortex-M0+ devices + */ +__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos); +} + +/** + * @brief Get Part number + * @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo + * @retval Value should be equal to 0xC60 for Cortex-M0+ + */ +__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos); +} + +/** + * @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release) + * @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision + * @retval Value between 0 and 255 (0x1: patch 1) + */ +__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void) +{ + return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos); +} + +/** + * @} + */ + +#if __MPU_PRESENT +/** @defgroup CORTEX_LL_EF_MPU MPU + * @{ + */ + +/** + * @brief Enable MPU with input options + * @rmtoll MPU_CTRL ENABLE LL_MPU_Enable + * @param Options This parameter can be one of the following values: + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE + * @arg @ref LL_MPU_CTRL_HARDFAULT_NMI + * @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT + * @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF + * @retval None + */ +__STATIC_INLINE void LL_MPU_Enable(uint32_t Options) +{ + /* Enable the MPU*/ + WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options)); + /* Ensure MPU settings take effects */ + __DSB(); + /* Sequence instruction fetches using update settings */ + __ISB(); +} + +/** + * @brief Disable MPU + * @rmtoll MPU_CTRL ENABLE LL_MPU_Disable + * @retval None + */ +__STATIC_INLINE void LL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + /* Disable MPU*/ + WRITE_REG(MPU->CTRL, 0U); +} + +/** + * @brief Check if MPU is enabled or not + * @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void) +{ + return ((READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk)) ? 1UL : 0UL); +} + +/** + * @brief Enable a MPU region + * @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Enable the MPU region */ + SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @brief Configure and enable a region + * @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR REGION LL_MPU_ConfigRegion\n + * MPU_RBAR ADDR LL_MPU_ConfigRegion\n + * MPU_RASR XN LL_MPU_ConfigRegion\n + * MPU_RASR AP LL_MPU_ConfigRegion\n + * MPU_RASR S LL_MPU_ConfigRegion\n + * MPU_RASR C LL_MPU_ConfigRegion\n + * MPU_RASR B LL_MPU_ConfigRegion\n + * MPU_RASR SIZE LL_MPU_ConfigRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @param Address Value of region base address + * @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF + * @param Attributes This parameter can be a combination of the following values: + * @arg @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B or @ref LL_MPU_REGION_SIZE_1KB + * or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB + * or @ref LL_MPU_REGION_SIZE_16KB or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB + * or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB + * or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB + * or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB or @ref LL_MPU_REGION_SIZE_32MB + * or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB + * or @ref LL_MPU_REGION_SIZE_512MB or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB + * or @ref LL_MPU_REGION_SIZE_4GB + * @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO + * or @ref LL_MPU_REGION_FULL_ACCESS or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO + * @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4 + * @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE + * @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE + * @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE + * @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE + * @retval None + */ +__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, + uint32_t Attributes) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Set base address */ + WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U)); + /* Configure MPU */ + WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | (SubRegionDisable << MPU_RASR_SRD_Pos))); +} + +/** + * @brief Disable a region + * @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n + * MPU_RASR ENABLE LL_MPU_DisableRegion + * @param Region This parameter can be one of the following values: + * @arg @ref LL_MPU_REGION_NUMBER0 + * @arg @ref LL_MPU_REGION_NUMBER1 + * @arg @ref LL_MPU_REGION_NUMBER2 + * @arg @ref LL_MPU_REGION_NUMBER3 + * @arg @ref LL_MPU_REGION_NUMBER4 + * @arg @ref LL_MPU_REGION_NUMBER5 + * @arg @ref LL_MPU_REGION_NUMBER6 + * @arg @ref LL_MPU_REGION_NUMBER7 + * @retval None + */ +__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region) +{ + /* Set Region number */ + WRITE_REG(MPU->RNR, Region); + /* Disable the MPU region */ + CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk); +} + +/** + * @} + */ + +#endif /* __MPU_PRESENT */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_CORTEX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_crc.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_crc.h new file mode 100644 index 0000000000..dde673b05e --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_crc.h @@ -0,0 +1,461 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_crc.h + * @author MCD Application Team + * @brief Header file of CRC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_CRC_H +#define STM32WL3x_LL_CRC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(CRC) + +/** @defgroup CRC_LL CRC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Constants CRC Exported Constants + * @{ + */ + +/** @defgroup CRC_LL_EC_POLYLENGTH Polynomial length + * @{ + */ +#define LL_CRC_POLYLENGTH_32B 0x00000000U /*!< 32 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< 16 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< 8 bits Polynomial size */ +#define LL_CRC_POLYLENGTH_7B (CRC_CR_POLYSIZE_1 | CRC_CR_POLYSIZE_0) /*!< 7 bits Polynomial size */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_INDATA_REVERSE Input Data Reverse + * @{ + */ +#define LL_CRC_INDATA_REVERSE_NONE 0x00000000U /*!< Input Data bit order not affected */ +#define LL_CRC_INDATA_REVERSE_BYTE CRC_CR_REV_IN_0 /*!< Input Data bit reversal done by byte */ +#define LL_CRC_INDATA_REVERSE_HALFWORD CRC_CR_REV_IN_1 /*!< Input Data bit reversal done by half-word */ +#define LL_CRC_INDATA_REVERSE_WORD (CRC_CR_REV_IN_1 | CRC_CR_REV_IN_0) /*!< Input Data bit reversal done by word */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_OUTDATA_REVERSE Output Data Reverse + * @{ + */ +#define LL_CRC_OUTDATA_REVERSE_NONE 0x00000000U /*!< Output Data bit order not affected */ +#define LL_CRC_OUTDATA_REVERSE_BIT CRC_CR_REV_OUT /*!< Output Data bit reversal done by bit */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_Default_Polynomial_Value Default CRC generating polynomial value + * @brief Normal representation of this polynomial value is + * X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2 + X + 1 . + * @{ + */ +#define LL_CRC_DEFAULT_CRC32_POLY 0x04C11DB7U /*!< Default CRC generating polynomial value */ +/** + * @} + */ + +/** @defgroup CRC_LL_EC_Default_InitValue Default CRC computation initialization value + * @{ + */ +#define LL_CRC_DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Default CRC computation initialization value */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Macros CRC Exported Macros + * @{ + */ + +/** @defgroup CRC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_CRC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, __VALUE__) + +/** + * @brief Read a value in CRC register + * @param __INSTANCE__ CRC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_CRC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CRC_LL_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_LL_EF_Configuration CRC Configuration functions + * @{ + */ + +/** + * @brief Reset the CRC calculation unit. + * @note If Programmable Initial CRC value feature + * is available, also set the Data Register to the value stored in the + * CRC_INIT register, otherwise, reset Data Register to its default value. + * @rmtoll CR RESET LL_CRC_ResetCRCCalculationUnit + * @param CRCx CRC Instance + * @retval None + */ +__STATIC_INLINE void LL_CRC_ResetCRCCalculationUnit(CRC_TypeDef *CRCx) +{ + SET_BIT(CRCx->CR, CRC_CR_RESET); +} + +/** + * @brief Configure size of the polynomial. + * @rmtoll CR POLYSIZE LL_CRC_SetPolynomialSize + * @param CRCx CRC Instance + * @param PolySize This parameter can be one of the following values: + * @arg @ref LL_CRC_POLYLENGTH_32B + * @arg @ref LL_CRC_POLYLENGTH_16B + * @arg @ref LL_CRC_POLYLENGTH_8B + * @arg @ref LL_CRC_POLYLENGTH_7B + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetPolynomialSize(CRC_TypeDef *CRCx, uint32_t PolySize) +{ + MODIFY_REG(CRCx->CR, CRC_CR_POLYSIZE, PolySize); +} + +/** + * @brief Return size of the polynomial. + * @rmtoll CR POLYSIZE LL_CRC_GetPolynomialSize + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_POLYLENGTH_32B + * @arg @ref LL_CRC_POLYLENGTH_16B + * @arg @ref LL_CRC_POLYLENGTH_8B + * @arg @ref LL_CRC_POLYLENGTH_7B + */ +__STATIC_INLINE uint32_t LL_CRC_GetPolynomialSize(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_POLYSIZE)); +} + +/** + * @brief Configure the reversal of the bit order of the input data + * @rmtoll CR REV_IN LL_CRC_SetInputDataReverseMode + * @param CRCx CRC Instance + * @param ReverseMode This parameter can be one of the following values: + * @arg @ref LL_CRC_INDATA_REVERSE_NONE + * @arg @ref LL_CRC_INDATA_REVERSE_BYTE + * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD + * @arg @ref LL_CRC_INDATA_REVERSE_WORD + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetInputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) +{ + MODIFY_REG(CRCx->CR, CRC_CR_REV_IN, ReverseMode); +} + +/** + * @brief Return type of reversal for input data bit order + * @rmtoll CR REV_IN LL_CRC_GetInputDataReverseMode + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_INDATA_REVERSE_NONE + * @arg @ref LL_CRC_INDATA_REVERSE_BYTE + * @arg @ref LL_CRC_INDATA_REVERSE_HALFWORD + * @arg @ref LL_CRC_INDATA_REVERSE_WORD + */ +__STATIC_INLINE uint32_t LL_CRC_GetInputDataReverseMode(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_IN)); +} + +/** + * @brief Configure the reversal of the bit order of the Output data + * @rmtoll CR REV_OUT LL_CRC_SetOutputDataReverseMode + * @param CRCx CRC Instance + * @param ReverseMode This parameter can be one of the following values: + * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE + * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetOutputDataReverseMode(CRC_TypeDef *CRCx, uint32_t ReverseMode) +{ + MODIFY_REG(CRCx->CR, CRC_CR_REV_OUT, ReverseMode); +} + +/** + * @brief Return type of reversal of the bit order of the Output data + * @rmtoll CR REV_OUT LL_CRC_GetOutputDataReverseMode + * @param CRCx CRC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_CRC_OUTDATA_REVERSE_NONE + * @arg @ref LL_CRC_OUTDATA_REVERSE_BIT + */ +__STATIC_INLINE uint32_t LL_CRC_GetOutputDataReverseMode(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_BIT(CRCx->CR, CRC_CR_REV_OUT)); +} + +/** + * @brief Initialize the Programmable initial CRC value. + * @note If the CRC size is less than 32 bits, the least significant bits + * are used to write the correct value + * @note LL_CRC_DEFAULT_CRC_INITVALUE could be used as value for InitCrc parameter. + * @rmtoll INIT INIT LL_CRC_SetInitialData + * @param CRCx CRC Instance + * @param InitCrc Value to be programmed in Programmable initial CRC value register + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetInitialData(CRC_TypeDef *CRCx, uint32_t InitCrc) +{ + WRITE_REG(CRCx->INIT, InitCrc); +} + +/** + * @brief Return current Initial CRC value. + * @note If the CRC size is less than 32 bits, the least significant bits + * are used to read the correct value + * @rmtoll INIT INIT LL_CRC_GetInitialData + * @param CRCx CRC Instance + * @retval Value programmed in Programmable initial CRC value register + */ +__STATIC_INLINE uint32_t LL_CRC_GetInitialData(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->INIT)); +} + +/** + * @brief Initialize the Programmable polynomial value + * (coefficients of the polynomial to be used for CRC calculation). + * @note LL_CRC_DEFAULT_CRC32_POLY could be used as value for PolynomCoef parameter. + * @note Please check Reference Manual and existing Errata Sheets, + * regarding possible limitations for Polynomial values usage. + * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @rmtoll POL POL LL_CRC_SetPolynomialCoef + * @param CRCx CRC Instance + * @param PolynomCoef Value to be programmed in Programmable Polynomial value register + * @retval None + */ +__STATIC_INLINE void LL_CRC_SetPolynomialCoef(CRC_TypeDef *CRCx, uint32_t PolynomCoef) +{ + WRITE_REG(CRCx->POL, PolynomCoef); +} + +/** + * @brief Return current Programmable polynomial value + * @note Please check Reference Manual and existing Errata Sheets, + * regarding possible limitations for Polynomial values usage. + * For example, for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @rmtoll POL POL LL_CRC_GetPolynomialCoef + * @param CRCx CRC Instance + * @retval Value programmed in Programmable Polynomial value register + */ +__STATIC_INLINE uint32_t LL_CRC_GetPolynomialCoef(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->POL)); +} + +/** + * @} + */ + +/** @defgroup CRC_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Write given 32-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData32 + * @param CRCx CRC Instance + * @param InData value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData32(CRC_TypeDef *CRCx, uint32_t InData) +{ + WRITE_REG(CRCx->DR, InData); +} + +/** + * @brief Write given 16-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData16 + * @param CRCx CRC Instance + * @param InData 16 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData16(CRC_TypeDef *CRCx, uint16_t InData) +{ + __IO uint16_t *pReg; + + pReg = (__IO uint16_t *)(__IO void *)(&CRCx->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = InData; +} + +/** + * @brief Write given 8-bit data to the CRC calculator + * @rmtoll DR DR LL_CRC_FeedData8 + * @param CRCx CRC Instance + * @param InData 8 bit value to be provided to CRC calculator between between Min_Data=0 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_FeedData8(CRC_TypeDef *CRCx, uint8_t InData) +{ + *(uint8_t __IO *)(&CRCx->DR) = (uint8_t) InData; +} + +/** + * @brief Return current CRC calculation result. 32 bits value is returned. + * @rmtoll DR DR LL_CRC_ReadData32 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (32 bits). + */ +__STATIC_INLINE uint32_t LL_CRC_ReadData32(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->DR)); +} + +/** + * @brief Return current CRC calculation result. 16 bits value is returned. + * @note This function is expected to be used in a 16 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData16 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (16 bits). + */ +__STATIC_INLINE uint16_t LL_CRC_ReadData16(const CRC_TypeDef *CRCx) +{ + return (uint16_t)READ_REG(CRCx->DR); +} + +/** + * @brief Return current CRC calculation result. 8 bits value is returned. + * @note This function is expected to be used in a 8 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData8 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (8 bits). + */ +__STATIC_INLINE uint8_t LL_CRC_ReadData8(const CRC_TypeDef *CRCx) +{ + return (uint8_t)READ_REG(CRCx->DR); +} + +/** + * @brief Return current CRC calculation result. 7 bits value is returned. + * @note This function is expected to be used in a 7 bits CRC polynomial size context. + * @rmtoll DR DR LL_CRC_ReadData7 + * @param CRCx CRC Instance + * @retval Current CRC calculation result as stored in CRC_DR register (7 bits). + */ +__STATIC_INLINE uint8_t LL_CRC_ReadData7(const CRC_TypeDef *CRCx) +{ + return (uint8_t)(READ_REG(CRCx->DR) & 0x7FU); +} + +/** + * @brief Return data stored in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one 32-bit long data. + * @rmtoll IDR IDR LL_CRC_Read_IDR + * @param CRCx CRC Instance + * @retval Value stored in CRC_IDR register (General-purpose 32-bit data register). + */ +__STATIC_INLINE uint32_t LL_CRC_Read_IDR(const CRC_TypeDef *CRCx) +{ + return (uint32_t)(READ_REG(CRCx->IDR)); +} + +/** + * @brief Store data in the Independent Data(IDR) register. + * @note This register can be used as a temporary storage location for one 32-bit long data. + * @rmtoll IDR IDR LL_CRC_Write_IDR + * @param CRCx CRC Instance + * @param InData value to be stored in CRC_IDR register (32-bit) between Min_Data=0 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_CRC_Write_IDR(CRC_TypeDef *CRCx, uint32_t InData) +{ + *((uint32_t __IO *)(&CRCx->IDR)) = (uint32_t) InData; +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup CRC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_CRC_DeInit(const CRC_TypeDef *CRCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(CRC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_CRC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dac.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dac.h new file mode 100644 index 0000000000..cecb2996c8 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dac.h @@ -0,0 +1,1126 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_dac.h + * @author MCD Application Team + * @brief Header file of DAC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_DAC_H +#define STM32WL3x_LL_DAC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(DAC1) + +/** @defgroup DAC_LL DAC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DAC_LL_Private_Constants DAC Private Constants + * @{ + */ + +/* Internal masks for DAC channels definition */ +/* To select into literal LL_DAC_CHANNEL_x the relevant bits for: */ +/* - channel bits position into registers CR, MCR, CCR, SHHR, SHRR */ +/* - channel bits position into register SWTRIG */ +/* - channel register offset of data holding register DHRx */ +/* - channel register offset of data output register DORx */ +#define DAC_CR_CH1_BITOFFSET 0UL /* Position of channel bits into registers + CR, MCR, CCR, SHHR, SHRR of channel 1 */ +#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET) + +#define DAC_SWTR_CH1 (DAC_SWTRIGR_SWTRIG) /* Channel bit into register SWTRIGR of channel 1. */ +#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1) + + +/* Miscellaneous data */ +#define DAC_DIGITAL_SCALE_12BITS 63UL /* Full-scale digital value with a resolution of 6 + bits (voltage range determined by analog voltage + references Vref+ and Vref-, refer to reference manual) */ + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DAC_LL_Private_Macros DAC Private Macros + * @{ + */ + +/** + * @brief Driver macro reserved for internal use: set a pointer to + * a register from a register basis from which an offset + * is applied. + * @param __REG__ Register basis from which the offset is applied. + * @param __REG_OFFFSET__ Offset to be applied (unit: number of registers). + * @retval Pointer to register address + */ +#define __DAC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \ + ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL)))) + +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DAC_LL_ES_INIT DAC Exported Init structure + * @{ + */ + +/** + * @brief Structure definition of some features of DAC instance. + */ +typedef struct +{ + uint32_t TriggerSource; /*!< Set the conversion trigger source for the selected DAC channel: + internal (SW start) or from external peripheral + (timer event, external interrupt line). + This parameter can be a value of @ref DAC_LL_EC_TRIGGER_SOURCE + + This feature can be modified afterwards using unitary + function @ref LL_DAC_SetTriggerSource(). */ + + uint32_t WaveAutoGeneration; /*!< Set the waveform automatic generation mode for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_WAVE_AUTO_GENERATION_MODE + + This feature can be modified afterwards using unitary + function @ref LL_DAC_SetWaveAutoGeneration(). */ + + uint32_t WaveAutoGenerationConfig; /*!< Set the waveform automatic generation mode for the selected DAC channel. + If waveform automatic generation mode is set to noise, this parameter + can be a value of @ref DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS + If waveform automatic generation mode is set to triangle, + this parameter can be a value of @ref DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE + @note If waveform automatic generation mode is disabled, + this parameter is discarded. + + This feature can be modified afterwards using unitary + function @ref LL_DAC_SetWaveNoiseLFSR(), + @ref LL_DAC_SetWaveTriangleAmplitude() + depending on the wave automatic generation selected. */ + + uint32_t OutputBuffer; /*!< Set the output buffer for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_OUTPUT_BUFFER + + This feature can be modified afterwards using unitary + function @ref LL_DAC_SetOutputBuffer(). */ + + uint32_t OutputConnection; /*!< Set the output connection for the selected DAC channel. + This parameter can be a value of @ref DAC_LL_EC_OUTPUT_CONNECTION + + This feature can be modified afterwards using unitary + function @ref LL_DAC_SetOutputConnection(). */ + +} LL_DAC_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Constants DAC Exported Constants + * @{ + */ + +/** @defgroup DAC_LL_EC_GET_FLAG DAC flags + * @brief Flags defines which can be used with LL_DAC_ReadReg function + * @{ + */ +/* DAC channel 1 flags */ +#define LL_DAC_FLAG_DMAUDR (DAC_SR_DMAUDR) /*!< DAC channel 1 flag DMA underrun */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_IT DAC interruptions + * @brief IT defines which can be used with LL_DAC_ReadReg and LL_DAC_WriteReg functions + * @{ + */ +#define LL_DAC_IT_DMAUDRIE (DAC_CR_DMAUDRIE) /*!< DAC channel 1 interruption DMA underrun */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_CHANNEL DAC channels + * @{ + */ +#define LL_DAC_CHANNEL_1 (DAC_CR_CH1_BITOFFSET | DAC_SWTR_CH1) /*!< DAC channel 1 */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_TRIGGER_SOURCE DAC trigger source + * @{ + */ +#define LL_DAC_TRIG_SOFTWARE (DAC_CR_TSEL_2 | DAC_CR_TSEL_1 | DAC_CR_TSEL_0) /*!< DAC channel conversion trigger internal (SW start) */ +#define LL_DAC_TRIG_EXT_TIM16_TRGO ( 0x0UL) /*!< DAC channel conversion trigger from external peripheral: TIM16 TRGO. */ +#define LL_DAC_TRIG_EXT_EXTI_LINE8 ( DAC_CR_TSEL_0) /*!< DAC channel conversion trigger from external peripheral: external interrupt line 8. */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_AUTO_GENERATION_MODE DAC waveform automatic generation mode + * @{ + */ +#define LL_DAC_WAVE_AUTO_GENERATION_NONE 0x00000000UL /*!< DAC channel wave auto generation mode disabled. */ +#define LL_DAC_WAVE_AUTO_GENERATION_NOISE ( DAC_CR_WAVE_0) /*!< DAC channel wave auto generation mode enabled, set generated noise waveform. */ +#define LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE (DAC_CR_WAVE_1 ) /*!< DAC channel wave auto generation mode enabled, set generated triangle waveform. */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS DAC wave generation - Noise LFSR unmask bits + * @{ + */ +#define LL_DAC_NOISE_LFSR_UNMASK_BIT0 0x00000000UL /*!< Noise wave generation, unmask LFSR bit0, for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 ( DAC_CR_MAMP_0) /*!< Noise wave generation, unmask LFSR bits[1:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 ( DAC_CR_MAMP_1 ) /*!< Noise wave generation, unmask LFSR bits[2:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 ( DAC_CR_MAMP_1 | DAC_CR_MAMP_0) /*!< Noise wave generation, unmask LFSR bits[3:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 ( DAC_CR_MAMP_2 ) /*!< Noise wave generation, unmask LFSR bits[4:0], for the selected DAC channel */ +#define LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 ( DAC_CR_MAMP_2 | DAC_CR_MAMP_0) /*!< Noise wave generation, unmask LFSR bits[5:0], for the selected DAC channel */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE DAC wave generation - Triangle amplitude + * @{ + */ +#define LL_DAC_TRIANGLE_AMPLITUDE_1 0x00000000UL /*!< Triangle wave generation, amplitude of 1 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_3 ( DAC_CR_MAMP_0) /*!< Triangle wave generation, amplitude of 3 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_7 ( DAC_CR_MAMP_1 ) /*!< Triangle wave generation, amplitude of 7 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_15 ( DAC_CR_MAMP_1 | DAC_CR_MAMP_0) /*!< Triangle wave generation, amplitude of 15 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_31 ( DAC_CR_MAMP_2 ) /*!< Triangle wave generation, amplitude of 31 LSB of DAC output range, for the selected DAC channel */ +#define LL_DAC_TRIANGLE_AMPLITUDE_63 ( DAC_CR_MAMP_2 | DAC_CR_MAMP_0) /*!< Triangle wave generation, amplitude of 63 LSB of DAC output range, for the selected DAC channel */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_OUTPUT_BUFFER DAC channel output buffer + * @{ + */ +#define LL_DAC_OUTPUT_BUFFER_ENABLE (DAC_CR_BON) /*!< The selected DAC channel output is buffered: higher drive current capability, but also higher current consumption */ +#define LL_DAC_OUTPUT_BUFFER_DISABLE 0x00000000UL /*!< The selected DAC channel output is not buffered: lower drive current capability, but also lower current consumption */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_OUTPUT_CONNECTION DAC channel output connection + * @{ + */ +#define LL_DAC_OUTPUT_CONNECT_GPIO 0x00000000UL /*!< The selected DAC channel output is connected to external pin */ +#define LL_DAC_OUTPUT_CONNECT_INTERNAL (DAC_CR_CMPEN) /*!< The selected DAC channel output is connected to on-chip peripherals via internal paths. On this STM32 series, output connection depends on output mode (normal or sample and hold) and output buffer state. Refer to comments of function @ref LL_DAC_SetOutputConnection(). */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_RESOLUTION DAC channel output resolution + * @{ + */ +#define LL_DAC_RESOLUTION_6B 0x00000000UL /*!< DAC channel resolution 6 bits */ +/** + * @} + */ + +/** @defgroup DAC_LL_EC_HW_DELAYS Definitions of DAC hardware constraints delays + * @note Only DAC peripheral HW delays are defined in DAC LL driver driver, + * not timeout values. + * For details on delays values, refer to descriptions in source code + * above each literal definition. + * @{ + */ + +/* Delay for DAC channel voltage settling time from DAC channel startup */ +/* (transition from disable to enable). */ +/* Note: DAC channel startup time depends on board application environment: */ +/* impedance connected to DAC channel output. */ +/* The delay below is specified under conditions: */ +/* - voltage maximum transition (lowest to highest value) */ +/* - until voltage reaches final value +-1LSB */ +/* - DAC channel output buffer enabled */ +/* - load impedance of 5kOhm (min), 50pF (max) */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tWAKEUP"). */ +/* Unit: us */ +#define LL_DAC_DELAY_STARTUP_VOLTAGE_SETTLING_US 15UL /*!< Delay for DAC channel voltage settling time from DAC channel startup (transition from disable to enable) */ + +/* Delay for DAC channel voltage settling time. */ +/* Note: DAC channel startup time depends on board application environment: */ +/* impedance connected to DAC channel output. */ +/* The delay below is specified under conditions: */ +/* - voltage maximum transition (lowest to highest value) */ +/* - until voltage reaches final value +-1LSB */ +/* - DAC channel output buffer enabled */ +/* - load impedance of 5kOhm min, 50pF max */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSETTLING"). */ +/* Unit: us */ +#define LL_DAC_DELAY_VOLTAGE_SETTLING_US 12UL /*!< Delay for DAC channel voltage settling time */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Macros DAC Exported Macros + * @{ + */ + +/** @defgroup DAC_LL_EM_WRITE_READ Common write and read registers macros + * @{ + */ + +/** + * @brief Write a value in DAC register + * @param __INSTANCE__ DAC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DAC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DAC register + * @param __INSTANCE__ DAC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DAC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) + +/** + * @} + */ + +/** @defgroup DAC_LL_EM_HELPER_MACRO DAC helper macro + * @{ + */ + +/** + * @brief Helper macro to get DAC channel number in decimal format + * from literals LL_DAC_CHANNEL_x. + * Example: + * __LL_DAC_CHANNEL_TO_DECIMAL_NB(LL_DAC_CHANNEL_1) + * will return decimal number "1". + * @note The input can be a value from functions where a channel + * number is returned. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval 1 + */ +#define __LL_DAC_CHANNEL_TO_DECIMAL_NB(__CHANNEL__) \ + ((__CHANNEL__) & DAC_SWTR_CHX_MASK) + +/** + * @brief Helper macro to get DAC channel in literal format LL_DAC_CHANNEL_x + * from number in decimal format. + * Example: + * __LL_DAC_DECIMAL_NB_TO_CHANNEL(1) + * will return a data equivalent to "LL_DAC_CHANNEL_1". + * @note If the input parameter does not correspond to a DAC channel, + * this macro returns value '0'. + * @param __DECIMAL_NB__ 1...2 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + */ +#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \ + (((__DECIMAL_NB__) == 1UL) \ + ? (LL_DAC_CHANNEL_1) \ + : \ + (0UL) \ + ) + +/** + * @brief Helper macro to define the DAC conversion data full-scale digital + * value corresponding to the selected DAC resolution. + * @note DAC conversion data full-scale corresponds to voltage range + * determined by analog voltage references Vref+ and Vref- + * (refer to reference manual). + * @param __DAC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_DAC_RESOLUTION_12B + * @arg @ref LL_DAC_RESOLUTION_8B + * @retval ADC conversion data equivalent voltage value (unit: mVolt) + */ +#define __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ + ((0x0000003FUL) >> ((__DAC_RESOLUTION__) << 1UL)) + +/** + * @brief Helper macro to calculate the DAC conversion data (unit: digital + * value) corresponding to a voltage (unit: mVolt). + * @note This helper macro is intended to provide input data in voltage + * rather than digital value, + * to be used with LL DAC functions such as + * @ref LL_DAC_ConvertData12RightAligned(). + * @note Analog reference voltage (Vref+) must be either known from + * user board environment or can be calculated using ADC measurement + * and ADC helper macro __LL_ADC_CALC_VREFANALOG_VOLTAGE(). + * @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV) + * @param __DAC_VOLTAGE__ Voltage to be generated by DAC channel + * (unit: mVolt). + * @param __DAC_RESOLUTION__ This parameter can be one of the following values: + * @arg @ref LL_DAC_RESOLUTION_12B + * @arg @ref LL_DAC_RESOLUTION_8B + * @retval DAC conversion data (unit: digital value) + */ +#define __LL_DAC_CALC_VOLTAGE_TO_DATA(__VREFANALOG_VOLTAGE__, __DAC_VOLTAGE__, __DAC_RESOLUTION__) \ + ((__DAC_VOLTAGE__) * __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \ + / (__VREFANALOG_VOLTAGE__) \ + ) + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DAC_LL_Exported_Functions DAC Exported Functions + * @{ + */ + +/** + * @brief Set the conversion trigger source for the selected DAC channel. + * @note For conversion trigger source to be effective, DAC trigger + * must be enabled using function @ref LL_DAC_EnableTrigger(). + * @note To set conversion trigger source, DAC channel must be disabled. + * Otherwise, the setting is discarded. + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR TSEL LL_DAC_SetTriggerSource + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @param TriggerSource This parameter can be one of the following values: + * @arg @ref LL_DAC_TRIG_SOFTWARE + * @arg @ref LL_DAC_TRIG_EXT_TIM16_TRGO + * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE8 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetTriggerSource(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t TriggerSource) +{ + MODIFY_REG(DACx->CR, + DAC_CR_TSEL << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + TriggerSource << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the conversion trigger source for the selected DAC channel. + * @note For conversion trigger source to be effective, DAC trigger + * must be enabled using function @ref LL_DAC_EnableTrigger(). + * @note Availability of parameters of trigger sources from timer + * depends on timers availability on the selected device. + * @rmtoll CR TSEL LL_DAC_GetTriggerSource + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_TRIG_SOFTWARE + * @arg @ref LL_DAC_TRIG_EXT_TIM16_TRGO + * @arg @ref LL_DAC_TRIG_EXT_EXTI_LINE8 + */ +__STATIC_INLINE uint32_t LL_DAC_GetTriggerSource(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_TSEL << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the waveform automatic generation mode + * for the selected DAC channel. + * @rmtoll CR WAVE LL_DAC_SetWaveAutoGeneration + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @param WaveAutoGeneration This parameter can be one of the following values: + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveAutoGeneration(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t WaveAutoGeneration) +{ + MODIFY_REG(DACx->CR, + DAC_CR_WAVE << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + WaveAutoGeneration << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the waveform automatic generation mode + * for the selected DAC channel. + * @rmtoll CR WAVE LL_DAC_GetWaveAutoGeneration + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NONE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_NOISE + * @arg @ref LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveAutoGeneration(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_WAVE << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the noise waveform generation for the selected DAC channel: + * Noise mode and parameters LFSR (linear feedback shift register). + * @note For wave generation to be effective, DAC channel + * wave generation mode must be enabled using + * function @ref LL_DAC_SetWaveAutoGeneration(). + * @note This setting can be set when the selected DAC channel is disabled + * (otherwise, the setting operation is ignored). + * @rmtoll CR MAMP LL_DAC_SetWaveNoiseLFSR + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @param NoiseLFSRMask This parameter can be one of the following values: + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS6_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS7_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS8_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS9_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS10_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS11_0 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveNoiseLFSR(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t NoiseLFSRMask) +{ + MODIFY_REG(DACx->CR, + DAC_CR_MAMP << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + NoiseLFSRMask << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the noise waveform generation for the selected DAC channel: + * Noise mode and parameters LFSR (linear feedback shift register). + * @rmtoll CR MAMP LL_DAC_GetWaveNoiseLFSR + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BIT0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS4_0 + * @arg @ref LL_DAC_NOISE_LFSR_UNMASK_BITS5_0 + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveNoiseLFSR(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the triangle waveform generation for the selected DAC channel: + * triangle mode and amplitude. + * @note For wave generation to be effective, DAC channel + * wave generation mode must be enabled using + * function @ref LL_DAC_SetWaveAutoGeneration(). + * @note This setting can be set when the selected DAC channel is disabled + * (otherwise, the setting operation is ignored). + * @rmtoll CR MAMP LL_DAC_SetWaveTriangleAmplitude + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @param TriangleAmplitude This parameter can be one of the following values: + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetWaveTriangleAmplitude(DAC_TypeDef *DACx, uint32_t DAC_Channel, + uint32_t TriangleAmplitude) +{ + MODIFY_REG(DACx->CR, + DAC_CR_MAMP << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + TriangleAmplitude << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the triangle waveform generation for the selected DAC channel: + * triangle mode and amplitude. + * @rmtoll CR MAMP LL_DAC_GetWaveTriangleAmplitude + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_3 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_7 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_15 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_31 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_63 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_127 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_255 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_511 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_1023 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_2047 + * @arg @ref LL_DAC_TRIANGLE_AMPLITUDE_4095 + */ +__STATIC_INLINE uint32_t LL_DAC_GetWaveTriangleAmplitude(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_MAMP << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the output buffer for the selected DAC channel. + * @rmtoll CR BON LL_DAC_SetOutputBuffer + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @param OutputBuffer This parameter can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE + * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetOutputBuffer(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputBuffer) +{ + MODIFY_REG(DACx->CR, + DAC_CR_BON << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + OutputBuffer << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the output buffer state for the selected DAC channel. + * @rmtoll CR BON LL_DAC_GetOutputBuffer + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_BUFFER_ENABLE + * @arg @ref LL_DAC_OUTPUT_BUFFER_DISABLE + */ +__STATIC_INLINE uint32_t LL_DAC_GetOutputBuffer(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, DAC_CR_BON << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @brief Set the output connection for the selected DAC channel. + * @note On this STM32 series, output connection depends on output mode (normal or + * sample and hold) and output buffer state. + * - if output connection is set to internal path and output buffer + * is enabled (whatever output mode): + * output connection is also connected to GPIO pin + * (both connections to GPIO pin and internal path). + * - if output connection is set to GPIO pin, output buffer + * is disabled, output mode set to sample and hold: + * output connection is also connected to internal path + * (both connections to GPIO pin and internal path). + * @rmtoll CR CMPEN LL_DAC_SetOutputConnection + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @param OutputConnection This parameter can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_CONNECT_GPIO + * @arg @ref LL_DAC_OUTPUT_CONNECT_INTERNAL + * @retval None + */ +__STATIC_INLINE void LL_DAC_SetOutputConnection(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t OutputConnection) +{ + MODIFY_REG(DACx->CR, + (uint32_t)DAC_CR_CMPEN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK), + OutputConnection << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get the output connection for the selected DAC channel. + * @note On this STM32 series, output connection depends on output mode (normal or + * sample and hold) and output buffer state. + * - if output connection is set to internal path and output buffer + * is enabled (whatever output mode): + * output connection is also connected to GPIO pin + * (both connections to GPIO pin and internal path). + * - if output connection is set to GPIO pin, output buffer + * is disabled, output mode set to sample and hold: + * output connection is also connected to internal path + * (both connections to GPIO pin and internal path). + * @rmtoll CR CMPEN LL_DAC_GetOutputConnection + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DAC_OUTPUT_CONNECT_GPIO + * @arg @ref LL_DAC_OUTPUT_CONNECT_INTERNAL + */ +__STATIC_INLINE uint32_t LL_DAC_GetOutputConnection(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return (uint32_t)(READ_BIT(DACx->CR, (uint32_t)DAC_CR_CMPEN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + >> (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); +} + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DAC DMA transfer request of the selected channel. + * @note To configure DMA source address (peripheral address), + * use function @ref LL_DAC_DMA_GetRegAddr(). + * @rmtoll CR DMAEN LL_DAC_EnableDMAReq + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_DMAEN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC DMA transfer request of the selected channel. + * @note To configure DMA source address (peripheral address), + * use function @ref LL_DAC_DMA_GetRegAddr(). + * @rmtoll CR DMAEN LL_DAC_DisableDMAReq + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableDMAReq(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_DMAEN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC DMA transfer request state of the selected channel. + * (0: DAC DMA transfer request is disabled, 1: DAC DMA transfer request is enabled) + * @rmtoll CR DMAEN LL_DAC_IsDMAReqEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsDMAReqEnabled(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return ((READ_BIT(DACx->CR, + DAC_CR_DMAEN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_DMAEN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); +} + +/** + * @brief Function to help to configure DMA transfer to DAC: retrieve the + * DAC register address from DAC instance and a list of DAC registers + * intended to be used (most commonly) with DMA transfer. + * @note These DAC registers are data holding registers: + * when DAC conversion is requested, DAC generates a DMA transfer + * request to have data available in DAC data holding registers. + * @rmtoll DHR DACDHR LL_DAC_DMA_GetRegAddr + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval DAC register address + */ +__STATIC_INLINE uint32_t LL_DAC_DMA_GetRegAddr(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + /* DAC channel selected. */ + return ((uint32_t)(&((DACx)->DHR))); +} +/** + * @} + */ + +/** @defgroup DAC_LL_EF_Operation Operation on DAC channels + * @{ + */ + +/** + * @brief Enable DAC selected channel. + * @rmtoll CR EN LL_DAC_Enable + * @note After enable from off state, DAC channel requires a delay + * for output voltage to reach accuracy +/- 1 LSB. + * Refer to device datasheet, parameter "tWAKEUP". + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval None + */ +__STATIC_INLINE void LL_DAC_Enable(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_EN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC selected channel. + * @rmtoll CR EN LL_DAC_Disable + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval None + */ +__STATIC_INLINE void LL_DAC_Disable(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_EN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC enable state of the selected channel. + * (0: DAC channel is disabled, 1: DAC channel is enabled) + * @rmtoll CR EN LL_DAC_IsEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabled(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return ((READ_BIT(DACx->CR, + DAC_CR_EN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_EN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); +} + +/** + * @brief Enable DAC trigger of the selected channel. + * @note - If DAC trigger is disabled, DAC conversion is performed + * automatically once the data holding register is updated, + * using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": + * @ref LL_DAC_ConvertData12RightAligned(), ... + * - If DAC trigger is enabled, DAC conversion is performed + * only when a hardware of software trigger event is occurring. + * Select trigger source using + * function @ref LL_DAC_SetTriggerSource(). + * @rmtoll CR TEN LL_DAC_EnableTrigger + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->CR, + DAC_CR_TEN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Disable DAC trigger of the selected channel. + * @rmtoll CR TEN LL_DAC_DisableTrigger + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableTrigger(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + CLEAR_BIT(DACx->CR, + DAC_CR_TEN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)); +} + +/** + * @brief Get DAC trigger state of the selected channel. + * (0: DAC trigger is disabled, 1: DAC trigger is enabled) + * @rmtoll CR TEN LL_DAC_IsTriggerEnabled + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsTriggerEnabled(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + return ((READ_BIT(DACx->CR, + DAC_CR_TEN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK)) + == (DAC_CR_TEN << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK))) ? 1UL : 0UL); +} + +/** + * @brief Trig DAC conversion by software for the selected DAC channel. + * @note Preliminarily, DAC trigger must be set to software trigger + * using function + * @ref LL_DAC_Init() + * @ref LL_DAC_SetTriggerSource() + * with parameter "LL_DAC_TRIGGER_SOFTWARE". + * and DAC trigger must be enabled using + * function @ref LL_DAC_EnableTrigger(). + * @note For devices featuring DAC with 2 channels: this function + * can perform a SW start of both DAC channels simultaneously. + * Two channels can be selected as parameter. + * Example: (LL_DAC_CHANNEL_1 | LL_DAC_CHANNEL_2) + * @rmtoll SWTRIGR SWTRIG LL_DAC_TrigSWConversion + * @param DACx DAC instance + * @param DAC_Channel This parameter can a combination of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval None + */ +__STATIC_INLINE void LL_DAC_TrigSWConversion(DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + SET_BIT(DACx->SWTRIGR, + (DAC_Channel & DAC_SWTR_CHX_MASK)); +} + +/** + * @brief Set the data to be loaded in the data holding register + * in format 6 bits right alignment (LSB aligned on bit 0), + * for the selected DAC channel. + * @rmtoll DHR DACDHR LL_DAC_ConvertData6RightAligned + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @param Data Value between Min_Data=0x00 and Max_Data=0x3F + * @retval None + */ +__STATIC_INLINE void LL_DAC_ConvertData6RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data) +{ + (void)(DAC_Channel); + + MODIFY_REG(DACx->DHR, DAC_DHR_DACDHR, Data); +} + +/** + * @brief Retrieve output data currently generated for the selected DAC channel. + * @note Whatever alignment and resolution settings + * (using functions "LL_DAC_ConvertData{8; 12}{Right; Left} Aligned()": + * @ref LL_DAC_ConvertData12RightAligned(), ...), + * output data format is 12 bits right aligned (LSB aligned on bit 0). + * @rmtoll DOR DACDOR LL_DAC_RetrieveOutputData + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @retval Value between Min_Data=0x000 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(const DAC_TypeDef *DACx, uint32_t DAC_Channel) +{ + (void)(DAC_Channel); + + return (uint16_t) READ_BIT(DACx->DOR, DAC_DOR_DACDOR); +} + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Get DAC underrun flag for DAC channel 1 + * @rmtoll SR DMAUDR LL_DAC_IsActiveFlag_DMAUDR + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsActiveFlag_DMAUDR(const DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->SR, LL_DAC_FLAG_DMAUDR) == (LL_DAC_FLAG_DMAUDR)) ? 1UL : 0UL); +} + +/** + * @brief Clear DAC underrun flag for DAC channel 1 + * @rmtoll SR DMAUDR LL_DAC_ClearFlag_DMAUDR + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_ClearFlag_DMAUDR(DAC_TypeDef *DACx) +{ + WRITE_REG(DACx->SR, LL_DAC_FLAG_DMAUDR); +} + +/** + * @} + */ + +/** @defgroup DAC_LL_EF_IT_Management IT management + * @{ + */ + +/** + * @brief Enable DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE LL_DAC_EnableIT_DMAUDR + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableIT_DMAUDR(DAC_TypeDef *DACx) +{ + SET_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE); +} + +/** + * @brief Disable DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE LL_DAC_DisableIT_DMAUDR + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableIT_DMAUDR(DAC_TypeDef *DACx) +{ + CLEAR_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE); +} + +/** + * @brief Get DMA underrun interrupt for DAC channel 1 + * @rmtoll CR DMAUDRIE LL_DAC_IsEnabledIT_DMAUDR + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsEnabledIT_DMAUDR(const DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->CR, LL_DAC_IT_DMAUDRIE) == (LL_DAC_IT_DMAUDRIE)) ? 1UL : 0UL); +} + +/** + * @brief Power-up the VCM buffer. + * @rmtoll CR VCMON LL_DAC_EnableVCMBuffer + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableVCMBuffer(DAC_TypeDef *DACx) +{ + SET_BIT(DACx->CR, DAC_CR_VCMON); +} + +/** + * @brief Power-up the VCM buffer. + * @rmtoll CR VCMON LL_DAC_DisableVCMBuffer + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableVCMBuffer(DAC_TypeDef *DACx) +{ + CLEAR_BIT(DACx->CR, DAC_CR_VCMON); +} + +/** + * @brief Get the VCM buffer state. + * (0: DAC VCM buffer is disabled, 1: DAC VCM buffer is enabled) + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsVCMBufferEnabled(const DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->CR, DAC_CR_VCMON) == (DAC_CR_VCMON)) ? 1UL : 0UL); +} + +/** + * @brief Enable the VCM buffer channel output. + * @rmtoll CR VCMEN LL_DAC_EnableVCMBufferOutput + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_EnableVCMBufferOutput(DAC_TypeDef *DACx) +{ + SET_BIT(DACx->CR, DAC_CR_VCMEN); +} + +/** + * @brief Disable the VCM buffer channel output. + * @rmtoll CR VCMEN LL_DAC_DisableVCMBufferOutput + * @param DACx DAC instance + * @retval None + */ +__STATIC_INLINE void LL_DAC_DisableVCMBufferOutput(DAC_TypeDef *DACx) +{ + CLEAR_BIT(DACx->CR, DAC_CR_VCMEN); +} + +/** + * @brief Get the VCM buffer output state. + * (0: DAC VCM buffer output is disabled, 1: DAC VCM buffer output is enabled) + * @param DACx DAC instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DAC_IsVCMBufferOutputEnabled(const DAC_TypeDef *DACx) +{ + return ((READ_BIT(DACx->CR, DAC_CR_VCMEN) == (DAC_CR_VCMEN)) ? 1UL : 0UL); +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DAC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_DAC_DeInit(const DAC_TypeDef *DACx); +ErrorStatus LL_DAC_Init(DAC_TypeDef *DACx, uint32_t DAC_Channel, const LL_DAC_InitTypeDef *DAC_InitStruct); +void LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_DAC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dma.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dma.h new file mode 100644 index 0000000000..e49d7c53f5 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dma.h @@ -0,0 +1,2208 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_dma.h + * @author MCD Application Team + * @brief Header file of DMA LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_DMA_H +#define STM32WL3x_LL_DMA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" +#include "stm32wl3x_ll_dmamux.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (DMA1) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Private_Macros DMA Private Macros + * @{ + */ + +/** + * @brief Helper macro to convert DMA Instance and index into DMA channel + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL_INDEX__ 0 to 7 to map DMAx_Channel1 to DMAx_Channel8 + * @retval Pointer to the DMA channel + */ +#define __LL_DMA_INSTANCE_TO_CHANNEL(__DMA_INSTANCE__, __CHANNEL_INDEX__) \ + (DMA1_Channel1 + (__CHANNEL_INDEX__)) + +/** + * @brief Helper macro to convert DMA Instance and index into DMAMUX channel + * @note DMAMUX channel 0 to 7 are mapped to DMA1 channel 1 to 8. + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL_INDEX__ 0 to 7 to map DMAx_Channel1 to DMAx_Channel8 + * @retval Pointer to the DMA channel + */ +#define __LL_DMA_INSTANCE_TO_DMAMUX_CCR(__DMA_INSTANCE__, __CHANNEL_INDEX__)\ + (DMAMUX1_Channel0 + (__CHANNEL_INDEX__)) +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_ES_INIT DMA Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer + or as Source base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer + or as Destination base address in case of memory to memory transfer direction. + + This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ + + uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, + from memory to memory or from peripheral to memory. + This parameter can be a value of @ref DMA_LL_EC_DIRECTION + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ + + uint32_t Mode; /*!< Specifies the normal or circular operation mode. + This parameter can be a value of @ref DMA_LL_EC_MODE + @note: The circular buffer mode cannot be used if the memory to memory + data transfer direction is configured on the selected Channel + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ + + uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ + + uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction + is incremented or not. + This parameter can be a value of @ref DMA_LL_EC_MEMORY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ + + uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ + + uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) + in case of memory to memory transfer direction. + This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ + + uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. + The data unit is equal to the source buffer configuration set in PeripheralSize + or MemorySize parameters depending in the transfer direction. + This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ + + uint32_t PeriphRequest; /*!< Specifies the peripheral request. + This parameter can be a value of @ref DMA_LL_EC_PERIPH + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphRequest(). */ + + uint32_t Priority; /*!< Specifies the channel priority level. + This parameter can be a value of @ref DMA_LL_EC_PRIORITY + + This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelPriorityLevel(). */ + +} LL_DMA_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants + * @{ + */ +/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_DMA_WriteReg function + * @{ + */ +#define LL_DMA_IFCR_CGIF1 DMA_IFCR_CGIF1 /*!< Channel 1 global flag */ +#define LL_DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_IFCR_CGIF2 DMA_IFCR_CGIF2 /*!< Channel 2 global flag */ +#define LL_DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_IFCR_CGIF3 DMA_IFCR_CGIF3 /*!< Channel 3 global flag */ +#define LL_DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_IFCR_CGIF4 DMA_IFCR_CGIF4 /*!< Channel 4 global flag */ +#define LL_DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_IFCR_CGIF5 DMA_IFCR_CGIF5 /*!< Channel 5 global flag */ +#define LL_DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5 /*!< Channel 5 transfer error flag */ +#define LL_DMA_IFCR_CGIF6 DMA_IFCR_CGIF6 /*!< Channel 6 global flag */ +#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */ +#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */ +#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */ +#define LL_DMA_IFCR_CGIF8 DMA_IFCR_CGIF8 /*!< Channel 8 global flag */ +#define LL_DMA_IFCR_CTCIF8 DMA_IFCR_CTCIF8 /*!< Channel 8 transfer complete flag */ +#define LL_DMA_IFCR_CHTIF8 DMA_IFCR_CHTIF8 /*!< Channel 8 half transfer flag */ +#define LL_DMA_IFCR_CTEIF8 DMA_IFCR_CTEIF8 /*!< Channel 8 transfer error flag */ + +/** + * @} + */ + +/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_DMA_ReadReg function + * @{ + */ +#define LL_DMA_ISR_GIF1 DMA_ISR_GIF1 /*!< Channel 1 global flag */ +#define LL_DMA_ISR_TCIF1 DMA_ISR_TCIF1 /*!< Channel 1 transfer complete flag */ +#define LL_DMA_ISR_HTIF1 DMA_ISR_HTIF1 /*!< Channel 1 half transfer flag */ +#define LL_DMA_ISR_TEIF1 DMA_ISR_TEIF1 /*!< Channel 1 transfer error flag */ +#define LL_DMA_ISR_GIF2 DMA_ISR_GIF2 /*!< Channel 2 global flag */ +#define LL_DMA_ISR_TCIF2 DMA_ISR_TCIF2 /*!< Channel 2 transfer complete flag */ +#define LL_DMA_ISR_HTIF2 DMA_ISR_HTIF2 /*!< Channel 2 half transfer flag */ +#define LL_DMA_ISR_TEIF2 DMA_ISR_TEIF2 /*!< Channel 2 transfer error flag */ +#define LL_DMA_ISR_GIF3 DMA_ISR_GIF3 /*!< Channel 3 global flag */ +#define LL_DMA_ISR_TCIF3 DMA_ISR_TCIF3 /*!< Channel 3 transfer complete flag */ +#define LL_DMA_ISR_HTIF3 DMA_ISR_HTIF3 /*!< Channel 3 half transfer flag */ +#define LL_DMA_ISR_TEIF3 DMA_ISR_TEIF3 /*!< Channel 3 transfer error flag */ +#define LL_DMA_ISR_GIF4 DMA_ISR_GIF4 /*!< Channel 4 global flag */ +#define LL_DMA_ISR_TCIF4 DMA_ISR_TCIF4 /*!< Channel 4 transfer complete flag */ +#define LL_DMA_ISR_HTIF4 DMA_ISR_HTIF4 /*!< Channel 4 half transfer flag */ +#define LL_DMA_ISR_TEIF4 DMA_ISR_TEIF4 /*!< Channel 4 transfer error flag */ +#define LL_DMA_ISR_GIF5 DMA_ISR_GIF5 /*!< Channel 5 global flag */ +#define LL_DMA_ISR_TCIF5 DMA_ISR_TCIF5 /*!< Channel 5 transfer complete flag */ +#define LL_DMA_ISR_HTIF5 DMA_ISR_HTIF5 /*!< Channel 5 half transfer flag */ +#define LL_DMA_ISR_TEIF5 DMA_ISR_TEIF5 /*!< Channel 5 transfer error flag */ +#define LL_DMA_ISR_GIF6 DMA_ISR_GIF6 /*!< Channel 6 global flag */ +#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */ +#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */ +#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */ +#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */ +#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */ +#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */ +#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */ +#define LL_DMA_ISR_GIF8 DMA_ISR_GIF8 /*!< Channel 8 global flag */ +#define LL_DMA_ISR_TCIF8 DMA_ISR_TCIF8 /*!< Channel 8 transfer complete flag */ +#define LL_DMA_ISR_HTIF8 DMA_ISR_HTIF8 /*!< Channel 8 half transfer flag */ +#define LL_DMA_ISR_TEIF8 DMA_ISR_TEIF8 /*!< Channel 8 transfer error flag */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_DMA_ReadReg and LL_DMA_WriteReg functions + * @{ + */ +#define LL_DMA_CCR_TCIE DMA_CCR_TCIE /*!< Transfer complete interrupt */ +#define LL_DMA_CCR_HTIE DMA_CCR_HTIE /*!< Half Transfer interrupt */ +#define LL_DMA_CCR_TEIE DMA_CCR_TEIE /*!< Transfer error interrupt */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_CHANNEL CHANNEL + * @{ + */ +#define LL_DMA_CHANNEL_1 0x00000001U /*!< DMA Channel 1 */ +#define LL_DMA_CHANNEL_2 0x00000002U /*!< DMA Channel 2 */ +#define LL_DMA_CHANNEL_3 0x00000003U /*!< DMA Channel 3 */ +#define LL_DMA_CHANNEL_4 0x00000004U /*!< DMA Channel 4 */ +#define LL_DMA_CHANNEL_5 0x00000005U /*!< DMA Channel 5 */ +#define LL_DMA_CHANNEL_6 0x00000006U /*!< DMA Channel 6 */ +#define LL_DMA_CHANNEL_7 0x00000007U /*!< DMA Channel 7 */ +#define LL_DMA_CHANNEL_8 0x00000008U /*!< DMA Channel 8 */ +#if defined(USE_FULL_LL_DRIVER) +#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */ +#endif /* USE_FULL_LL_DRIVER */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_DIRECTION Transfer Direction + * @{ + */ +#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR /*!< Memory to peripheral direction */ +#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM /*!< Memory to memory direction */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MODE Transfer mode + * @{ + */ +#define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ +#define LL_DMA_MODE_CIRCULAR DMA_CCR_CIRC /*!< Circular Mode */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PERIPH Peripheral increment mode + * @{ + */ +#define LL_DMA_PERIPH_INCREMENT DMA_CCR_PINC /*!< Peripheral increment mode Enable */ +#define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MEMORY Memory increment mode + * @{ + */ +#define LL_DMA_MEMORY_INCREMENT DMA_CCR_MINC /*!< Memory increment mode Enable */ +#define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PDATAALIGN Peripheral data alignment + * @{ + */ +#define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ +#define LL_DMA_PDATAALIGN_HALFWORD DMA_CCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ +#define LL_DMA_PDATAALIGN_WORD DMA_CCR_PSIZE_1 /*!< Peripheral data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_MDATAALIGN Memory data alignment + * @{ + */ +#define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ +#define LL_DMA_MDATAALIGN_HALFWORD DMA_CCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ +#define LL_DMA_MDATAALIGN_WORD DMA_CCR_MSIZE_1 /*!< Memory data alignment : Word */ +/** + * @} + */ + +/** @defgroup DMA_LL_EC_PRIORITY Transfer Priority level + * @{ + */ +#define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ +#define LL_DMA_PRIORITY_MEDIUM DMA_CCR_PL_0 /*!< Priority level : Medium */ +#define LL_DMA_PRIORITY_HIGH DMA_CCR_PL_1 /*!< Priority level : High */ +#define LL_DMA_PRIORITY_VERYHIGH DMA_CCR_PL /*!< Priority level : Very_High */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros + * @{ + */ + +/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMA register + * @param __INSTANCE__ DMA Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely + * @{ + */ +/** + * @brief Convert DMAx_Channely into DMAx + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval DMAx + */ +#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1) + +/** + * @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y + * @param __CHANNEL_INSTANCE__ DMAx_Channely + * @retval LL_DMA_CHANNEL_y + */ +#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__) \ + (((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \ + ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel7)) ? LL_DMA_CHANNEL_7 : \ + LL_DMA_CHANNEL_8) + +/** + * @brief Convert DMA Instance DMAx and LL_DMA_CHANNEL_y into DMAx_Channely + * @param __DMA_INSTANCE__ DMAx + * @param __CHANNEL__ LL_DMA_CHANNEL_y + * @retval DMAx_Channely + */ +#define __LL_DMA_GET_CHANNEL_INSTANCE(__DMA_INSTANCE__, __CHANNEL__) \ + ((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_1))) ? DMA1_Channel1 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_2))) ? DMA1_Channel2 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_5))) ? DMA1_Channel5 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_6))) ? DMA1_Channel6 : \ + (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_7))) ? DMA1_Channel7 : \ + DMA1_Channel8) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Enable DMA channel. + * @rmtoll CCR EN LL_DMA_EnableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + SET_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_EN); +} + +/** + * @brief Disable DMA channel. + * @rmtoll CCR EN LL_DMA_DisableChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + CLEAR_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_EN); +} + +/** + * @brief Check if DMA channel is enabled or disabled. + * @rmtoll CCR EN LL_DMA_IsEnabledChannel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return ((READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_EN) == (DMA_CCR_EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure all parameters link to DMA transfer. + * @rmtoll CCR DIR LL_DMA_ConfigTransfer\n + * CCR MEM2MEM LL_DMA_ConfigTransfer\n + * CCR CIRC LL_DMA_ConfigTransfer\n + * CCR PINC LL_DMA_ConfigTransfer\n + * CCR MINC LL_DMA_ConfigTransfer\n + * CCR PSIZE LL_DMA_ConfigTransfer\n + * CCR MSIZE LL_DMA_ConfigTransfer\n + * CCR PL LL_DMA_ConfigTransfer + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR + * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT + * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT + * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD + * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD + * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Configuration) +{ + (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, + Configuration); +} + +/** + * @brief Set Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_SetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_SetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Direction) +{ + (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction); +} + +/** + * @brief Get Data transfer direction (read from peripheral or from memory). + * @rmtoll CCR DIR LL_DMA_GetDataTransferDirection\n + * CCR MEM2MEM LL_DMA_GetDataTransferDirection + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); +} + +/** + * @brief Set DMA mode circular or normal. + * @note The circular buffer mode cannot be used if the memory-to-memory + * data transfer is configured on the selected Channel. + * @rmtoll CCR CIRC LL_DMA_SetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode) +{ + (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_CIRC, + Mode); +} + +/** + * @brief Get DMA mode circular or normal. + * @rmtoll CCR CIRC LL_DMA_GetMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MODE_NORMAL + * @arg @ref LL_DMA_MODE_CIRCULAR + */ +__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_CIRC)); +} + +/** + * @brief Set Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_SetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param PeriphOrM2MSrcIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcIncMode) +{ + (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_PINC, + PeriphOrM2MSrcIncMode); +} + +/** + * @brief Get Peripheral increment mode. + * @rmtoll CCR PINC LL_DMA_GetPeriphIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PERIPH_INCREMENT + * @arg @ref LL_DMA_PERIPH_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_PINC)); +} + +/** + * @brief Set Memory increment mode. + * @rmtoll CCR MINC LL_DMA_SetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param MemoryOrM2MDstIncMode This parameter can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstIncMode) +{ + (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_MINC, + MemoryOrM2MDstIncMode); +} + +/** + * @brief Get Memory increment mode. + * @rmtoll CCR MINC LL_DMA_GetMemoryIncMode + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MEMORY_INCREMENT + * @arg @ref LL_DMA_MEMORY_NOINCREMENT + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_MINC)); +} + +/** + * @brief Set Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_SetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param PeriphOrM2MSrcDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphOrM2MSrcDataSize) +{ + (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_PSIZE, + PeriphOrM2MSrcDataSize); +} + +/** + * @brief Get Peripheral size. + * @rmtoll CCR PSIZE LL_DMA_GetPeriphSize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PDATAALIGN_BYTE + * @arg @ref LL_DMA_PDATAALIGN_HALFWORD + * @arg @ref LL_DMA_PDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_PSIZE)); +} + +/** + * @brief Set Memory size. + * @rmtoll CCR MSIZE LL_DMA_SetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param MemoryOrM2MDstDataSize This parameter can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryOrM2MDstDataSize) +{ + (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_MSIZE, + MemoryOrM2MDstDataSize); +} + +/** + * @brief Get Memory size. + * @rmtoll CCR MSIZE LL_DMA_GetMemorySize + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_MDATAALIGN_BYTE + * @arg @ref LL_DMA_MDATAALIGN_HALFWORD + * @arg @ref LL_DMA_MDATAALIGN_WORD + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_MSIZE)); +} + +/** + * @brief Set Channel priority level. + * @rmtoll CCR PL LL_DMA_SetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param Priority This parameter can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Priority) +{ + (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_PL, + Priority); +} + +/** + * @brief Get Channel priority level. + * @rmtoll CCR PL LL_DMA_GetChannelPriorityLevel + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMA_PRIORITY_LOW + * @arg @ref LL_DMA_PRIORITY_MEDIUM + * @arg @ref LL_DMA_PRIORITY_HIGH + * @arg @ref LL_DMA_PRIORITY_VERYHIGH + */ +__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_PL)); +} + +/** + * @brief Set Number of data to transfer. + * @note This action has no effect if + * channel is enabled. + * @rmtoll CNDTR NDT LL_DMA_SetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param NbData Between Min_Data = 0 and Max_Data = 0x0000FFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData) +{ + (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CNDTR, + DMA_CNDTR_NDT, NbData); +} + +/** + * @brief Get Number of data to transfer. + * @note Once the channel is enabled, the return value indicate the + * remaining bytes to be transmitted. + * @rmtoll CNDTR NDT LL_DMA_GetDataLength + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CNDTR, + DMA_CNDTR_NDT)); +} + +/** + * @brief Configure the Source and Destination addresses. + * @note This API must not be called when the DMA channel is enabled. + * @note Each peripheral using DMA provides an API to get directly the register address (LL_PPP_DMA_GetRegAddr). + * @rmtoll CPAR PA LL_DMA_ConfigAddresses\n + * CMAR MA LL_DMA_ConfigAddresses + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param SrcAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param DstAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH + * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY + * @retval None + */ +__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t SrcAddress, + uint32_t DstAddress, uint32_t Direction) +{ + (void)DMAx; + /* Direction Memory to Periph */ + if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) + { + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CMAR, SrcAddress); + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CPAR, DstAddress); + } + /* Direction Periph to Memory and Memory to Memory */ + else + { + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CPAR, SrcAddress); + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CMAR, DstAddress); + } +} + +/** + * @brief Set the Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + (void)DMAx; + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CMAR, MemoryAddress); +} + +/** + * @brief Set the Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param PeriphAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t PeriphAddress) +{ + (void)DMAx; + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CPAR, PeriphAddress); +} + +/** + * @brief Get Memory address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CMAR MA LL_DMA_GetMemoryAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CMAR)); +} + +/** + * @brief Get Peripheral address. + * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. + * @rmtoll CPAR PA LL_DMA_GetPeriphAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CPAR)); +} + +/** + * @brief Set the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CPAR PA LL_DMA_SetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + (void)DMAx; + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CPAR, MemoryAddress); +} + +/** + * @brief Set the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @note This API must not be called when the DMA channel is enabled. + * @rmtoll CMAR MA LL_DMA_SetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param MemoryAddress Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t MemoryAddress) +{ + (void)DMAx; + WRITE_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CMAR, MemoryAddress); +} + +/** + * @brief Get the Memory to Memory Source address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CPAR PA LL_DMA_GetM2MSrcAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CPAR)); +} + +/** + * @brief Get the Memory to Memory Destination address. + * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. + * @rmtoll CMAR MA LL_DMA_GetM2MDstAddress + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval Between Min_Data = 0 and Max_Data = 0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_REG(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CMAR)); +} + +/** + * @brief Set DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 7 are mapped to DMA1 channel 1 to 8. + * @rmtoll CxCR DMAREQ_ID LL_DMA_SetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg LL_DMA_CHANNEL_1 + * @arg LL_DMA_CHANNEL_2 + * @arg LL_DMA_CHANNEL_3 + * @arg LL_DMA_CHANNEL_4 + * @arg LL_DMA_CHANNEL_5 + * @arg LL_DMA_CHANNEL_6 + * @arg LL_DMA_CHANNEL_7 + * @arg LL_DMA_CHANNEL_8 + * @param Request This parameter can be a value of @ref DMA_LL_EC_PERIPH + * @retval None + */ +__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Request) +{ + (void)DMAx; + MODIFY_REG(__LL_DMA_INSTANCE_TO_DMAMUX_CCR(DMAx, Channel - 1U)->CxCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMA request for DMA Channels on DMAMUX Channel x. + * @note DMAMUX channel 0 to 7 are mapped to DMA1 channel 1 to 8. + * @rmtoll CxCR DMAREQ_ID LL_DMA_GetPeriphRequest + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg LL_DMA_CHANNEL_1 + * @arg LL_DMA_CHANNEL_2 + * @arg LL_DMA_CHANNEL_3 + * @arg LL_DMA_CHANNEL_4 + * @arg LL_DMA_CHANNEL_5 + * @arg LL_DMA_CHANNEL_6 + * @arg LL_DMA_CHANNEL_7 + * @arg LL_DMA_CHANNEL_8 + * @retval Returned This parameter can be a value of @ref DMA_LL_EC_PERIPH + */ +__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return (READ_BIT(__LL_DMA_INSTANCE_TO_DMAMUX_CCR(DMAx, Channel - 1U)->CxCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Channel 1 global interrupt flag. + * @rmtoll ISR GIF1 LL_DMA_IsActiveFlag_GI1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 global interrupt flag. + * @rmtoll ISR GIF2 LL_DMA_IsActiveFlag_GI2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 global interrupt flag. + * @rmtoll ISR GIF3 LL_DMA_IsActiveFlag_GI3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 global interrupt flag. + * @rmtoll ISR GIF4 LL_DMA_IsActiveFlag_GI4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 global interrupt flag. + * @rmtoll ISR GIF5 LL_DMA_IsActiveFlag_GI5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 6 global interrupt flag. + * @rmtoll ISR GIF6 LL_DMA_IsActiveFlag_GI6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 7 global interrupt flag. + * @rmtoll ISR GIF7 LL_DMA_IsActiveFlag_GI7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 8 global interrupt flag. + * @rmtoll ISR GIF8 LL_DMA_IsActiveFlag_GI8 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI8(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF8) == (DMA_ISR_GIF8)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 1 transfer complete flag. + * @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer complete flag. + * @rmtoll ISR TCIF2 LL_DMA_IsActiveFlag_TC2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer complete flag. + * @rmtoll ISR TCIF3 LL_DMA_IsActiveFlag_TC3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 transfer complete flag. + * @rmtoll ISR TCIF4 LL_DMA_IsActiveFlag_TC4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 transfer complete flag. + * @rmtoll ISR TCIF5 LL_DMA_IsActiveFlag_TC5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 6 transfer complete flag. + * @rmtoll ISR TCIF6 LL_DMA_IsActiveFlag_TC6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 7 transfer complete flag. + * @rmtoll ISR TCIF7 LL_DMA_IsActiveFlag_TC7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 8 transfer complete flag. + * @rmtoll ISR TCIF8 LL_DMA_IsActiveFlag_TC8 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC8(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF8) == (DMA_ISR_TCIF8)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 1 half transfer flag. + * @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 half transfer flag. + * @rmtoll ISR HTIF2 LL_DMA_IsActiveFlag_HT2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 half transfer flag. + * @rmtoll ISR HTIF3 LL_DMA_IsActiveFlag_HT3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 half transfer flag. + * @rmtoll ISR HTIF4 LL_DMA_IsActiveFlag_HT4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 half transfer flag. + * @rmtoll ISR HTIF5 LL_DMA_IsActiveFlag_HT5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 6 half transfer flag. + * @rmtoll ISR HTIF6 LL_DMA_IsActiveFlag_HT6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 7 half transfer flag. + * @rmtoll ISR HTIF7 LL_DMA_IsActiveFlag_HT7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 8 half transfer flag. + * @rmtoll ISR HTIF8 LL_DMA_IsActiveFlag_HT8 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT8(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF8) == (DMA_ISR_HTIF8)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 1 transfer error flag. + * @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 2 transfer error flag. + * @rmtoll ISR TEIF2 LL_DMA_IsActiveFlag_TE2 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 3 transfer error flag. + * @rmtoll ISR TEIF3 LL_DMA_IsActiveFlag_TE3 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 4 transfer error flag. + * @rmtoll ISR TEIF4 LL_DMA_IsActiveFlag_TE4 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 5 transfer error flag. + * @rmtoll ISR TEIF5 LL_DMA_IsActiveFlag_TE5 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 6 transfer error flag. + * @rmtoll ISR TEIF6 LL_DMA_IsActiveFlag_TE6 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 7 transfer error flag. + * @rmtoll ISR TEIF7 LL_DMA_IsActiveFlag_TE7 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)) ? 1UL : 0UL); +} + +/** + * @brief Get Channel 8 transfer error flag. + * @rmtoll ISR TEIF8 LL_DMA_IsActiveFlag_TE8 + * @param DMAx DMAx Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE8(DMA_TypeDef *DMAx) +{ + (void)DMAx; + return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF8) == (DMA_ISR_TEIF8)) ? 1UL : 0UL); +} + +/** + * @brief Clear Channel 1 global interrupt flag. + * @rmtoll IFCR CGIF1 LL_DMA_ClearFlag_GI1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF1); +} + +/** + * @brief Clear Channel 2 global interrupt flag. + * @rmtoll IFCR CGIF2 LL_DMA_ClearFlag_GI2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF2); +} + +/** + * @brief Clear Channel 3 global interrupt flag. + * @rmtoll IFCR CGIF3 LL_DMA_ClearFlag_GI3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF3); +} + +/** + * @brief Clear Channel 4 global interrupt flag. + * @rmtoll IFCR CGIF4 LL_DMA_ClearFlag_GI4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF4); +} + +/** + * @brief Clear Channel 5 global interrupt flag. + * @rmtoll IFCR CGIF5 LL_DMA_ClearFlag_GI5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF5); +} + +/** + * @brief Clear Channel 6 global interrupt flag. + * @rmtoll IFCR CGIF6 LL_DMA_ClearFlag_GI6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6); +} + +/** + * @brief Clear Channel 7 global interrupt flag. + * @rmtoll IFCR CGIF7 LL_DMA_ClearFlag_GI7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7); +} + +/** + * @brief Clear Channel 8 global interrupt flag. + * @rmtoll IFCR CGIF8 LL_DMA_ClearFlag_GI8 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_GI8(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF8); +} + +/** + * @brief Clear Channel 1 transfer complete flag. + * @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF1); +} + +/** + * @brief Clear Channel 2 transfer complete flag. + * @rmtoll IFCR CTCIF2 LL_DMA_ClearFlag_TC2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF2); +} + +/** + * @brief Clear Channel 3 transfer complete flag. + * @rmtoll IFCR CTCIF3 LL_DMA_ClearFlag_TC3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF3); +} + +/** + * @brief Clear Channel 4 transfer complete flag. + * @rmtoll IFCR CTCIF4 LL_DMA_ClearFlag_TC4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF4); +} + +/** + * @brief Clear Channel 5 transfer complete flag. + * @rmtoll IFCR CTCIF5 LL_DMA_ClearFlag_TC5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF5); +} + +/** + * @brief Clear Channel 6 transfer complete flag. + * @rmtoll IFCR CTCIF6 LL_DMA_ClearFlag_TC6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6); +} + +/** + * @brief Clear Channel 7 transfer complete flag. + * @rmtoll IFCR CTCIF7 LL_DMA_ClearFlag_TC7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7); +} + +/** + * @brief Clear Channel 8 transfer complete flag. + * @rmtoll IFCR CTCIF8 LL_DMA_ClearFlag_TC8 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TC8(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF8); +} + +/** + * @brief Clear Channel 1 half transfer flag. + * @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF1); +} + +/** + * @brief Clear Channel 2 half transfer flag. + * @rmtoll IFCR CHTIF2 LL_DMA_ClearFlag_HT2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF2); +} + +/** + * @brief Clear Channel 3 half transfer flag. + * @rmtoll IFCR CHTIF3 LL_DMA_ClearFlag_HT3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF3); +} + +/** + * @brief Clear Channel 4 half transfer flag. + * @rmtoll IFCR CHTIF4 LL_DMA_ClearFlag_HT4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF4); +} + +/** + * @brief Clear Channel 5 half transfer flag. + * @rmtoll IFCR CHTIF5 LL_DMA_ClearFlag_HT5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF5); +} + +/** + * @brief Clear Channel 6 half transfer flag. + * @rmtoll IFCR CHTIF6 LL_DMA_ClearFlag_HT6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6); +} + +/** + * @brief Clear Channel 7 half transfer flag. + * @rmtoll IFCR CHTIF7 LL_DMA_ClearFlag_HT7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7); +} + +/** + * @brief Clear Channel 8 half transfer flag. + * @rmtoll IFCR CHTIF8 LL_DMA_ClearFlag_HT8 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_HT8(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF8); +} + +/** + * @brief Clear Channel 1 transfer error flag. + * @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF1); +} + +/** + * @brief Clear Channel 2 transfer error flag. + * @rmtoll IFCR CTEIF2 LL_DMA_ClearFlag_TE2 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF2); +} + +/** + * @brief Clear Channel 3 transfer error flag. + * @rmtoll IFCR CTEIF3 LL_DMA_ClearFlag_TE3 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF3); +} + +/** + * @brief Clear Channel 4 transfer error flag. + * @rmtoll IFCR CTEIF4 LL_DMA_ClearFlag_TE4 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF4); +} + +/** + * @brief Clear Channel 5 transfer error flag. + * @rmtoll IFCR CTEIF5 LL_DMA_ClearFlag_TE5 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF5); +} + +/** + * @brief Clear Channel 6 transfer error flag. + * @rmtoll IFCR CTEIF6 LL_DMA_ClearFlag_TE6 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6); +} + +/** + * @brief Clear Channel 7 transfer error flag. + * @rmtoll IFCR CTEIF7 LL_DMA_ClearFlag_TE7 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7); +} + +/** + * @brief Clear Channel 8 transfer error flag. + * @rmtoll IFCR CTEIF8 LL_DMA_ClearFlag_TE8 + * @param DMAx DMAx Instance + * @retval None + */ +__STATIC_INLINE void LL_DMA_ClearFlag_TE8(DMA_TypeDef *DMAx) +{ + (void)DMAx; + WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF8); +} + +/** + * @} + */ + +/** @defgroup DMA_LL_EF_IT_Management IT_Management + * @{ + */ +/** + * @brief Enable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_EnableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + SET_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Enable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_EnableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + SET_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Enable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_EnableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval None + */ +__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + SET_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Disable Transfer complete interrupt. + * @rmtoll CCR TCIE LL_DMA_DisableIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + CLEAR_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_TCIE); +} + +/** + * @brief Disable Half transfer interrupt. + * @rmtoll CCR HTIE LL_DMA_DisableIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + CLEAR_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_HTIE); +} + +/** + * @brief Disable Transfer error interrupt. + * @rmtoll CCR TEIE LL_DMA_DisableIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval None + */ +__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + CLEAR_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, DMA_CCR_TEIE); +} + +/** + * @brief Check if Transfer complete Interrupt is enabled. + * @rmtoll CCR TCIE LL_DMA_IsEnabledIT_TC + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return ((READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_TCIE) == (DMA_CCR_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Half transfer Interrupt is enabled. + * @rmtoll CCR HTIE LL_DMA_IsEnabledIT_HT + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return ((READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_HTIE) == (DMA_CCR_HTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Transfer error Interrupt is enabled. + * @rmtoll CCR TEIE LL_DMA_IsEnabledIT_TE + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel) +{ + (void)DMAx; + return ((READ_BIT(__LL_DMA_INSTANCE_TO_CHANNEL(DMAx, Channel - 1U)->CCR, + DMA_CCR_TEIE) == (DMA_CCR_TEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct); +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel); +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_DMA_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dmamux.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dmamux.h new file mode 100644 index 0000000000..36c24a1281 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_dmamux.h @@ -0,0 +1,264 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_dmamux.h + * @author MCD Application Team + * @brief Header file of DMAMUX LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_DMAMUX_H +#define STM32WL3x_LL_DMAMUX_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (DMAMUX1) + +/** @defgroup DMAMUX_LL DMAMUX + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Private_Constants DMAMUX Private Constants + * @{ + */ +/* Define used to get DMAMUX CCR register size */ +#define DMAMUX_CCR_SIZE 0x00000004UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Constants DMAMUX Exported Constants + * @{ + */ + +/** @defgroup DMAMUX_LL_EC_REQUEST Transfer request + * @{ + */ +#define LL_DMAMUX_REQ_MEM2MEM 0x00000000U /*!< Memory to Memory transfer */ +#ifdef SPI3 +#define LL_DMAMUX_REQ_SPI3_RX 0x00000002U /*!< DMAMUX SPI3 RX request */ +#define LL_DMAMUX_REQ_SPI3_TX 0x00000003U /*!< DMAMUX SPI3 TX request */ +#endif /* SPI3 */ +#ifdef SPI1 +#define LL_DMAMUX_REQ_SPI1_RX 0x00000004U /*!< DMAMUX SPI1 RX request */ +#define LL_DMAMUX_REQ_SPI1_TX 0x00000005U /*!< DMAMUX SPI1 TX request */ +#endif /* SPI1 */ +#ifdef AES +#define LL_DMAMUX_REQ_AES_OUT 0x00000006U /*!< DMAMUX AES RX request */ +#define LL_DMAMUX_REQ_AES_IN 0x00000007U /*!< DMAMUX AES TX request */ +#endif /* AES */ +#ifdef I2C1 +#define LL_DMAMUX_REQ_I2C1_RX 0x00000008U /*!< DMAMUX I2C1 RX request */ +#define LL_DMAMUX_REQ_I2C1_TX 0x00000009U /*!< DMAMUX I2C1 TX request */ +#endif /* I2C1 */ +#ifdef I2C2 +#define LL_DMAMUX_REQ_I2C2_RX 0x0000000AU /*!< DMAMUX I2C2 RX request */ +#define LL_DMAMUX_REQ_I2C2_TX 0x0000000BU /*!< DMAMUX I2C2 TX request */ +#endif /* I2C2 */ +#define LL_DMAMUX_REQ_USART1_RX 0x0000000CU /*!< DMAMUX USART1 RX request */ +#define LL_DMAMUX_REQ_USART1_TX 0x0000000DU /*!< DMAMUX USART1 TX request */ +#define LL_DMAMUX_REQ_LPUART1_RX 0x0000000EU /*!< DMAMUX LPUART1 RX request */ +#define LL_DMAMUX_REQ_LPUART1_TX 0x0000000FU /*!< DMAMUX LPUART1 TX request */ +#define LL_DMAMUX_REQ_ADC1_DS 0x00000010U /*!< DMAMUX ADC DS output request */ +#ifdef TIM2 +#define LL_DMAMUX_REQ_TIM2_TRG 0x00000011U /*!< DMAMUX TIM2 CH1 request */ +#define LL_DMAMUX_REQ_TIM2_CH1 0x00000012U /*!< DMAMUX TIM2 CH1 request */ +#define LL_DMAMUX_REQ_TIM2_CH2 0x00000013U /*!< DMAMUX TIM2 CH3 request */ +#define LL_DMAMUX_REQ_TIM2_CH3 0x00000014U /*!< DMAMUX TIM2 CH3 request */ +#define LL_DMAMUX_REQ_TIM2_CH4 0x00000015U /*!< DMAMUX TIM2 CH4 request */ +#define LL_DMAMUX_REQ_TIM2_UP 0x00000016U /*!< DMAMUX TIM2 UP request */ +#endif /* TIM2 */ +#ifdef TIM16 +#define LL_DMAMUX_REQ_TIM16_CH1 0x00000017U /*!< DMAMUX TIM16 CH1 request */ +#define LL_DMAMUX_REQ_TIM16_UP 0x00000018U /*!< DMAMUX TIM16 UP request */ +#define LL_DMAMUX_REQ_TIM16_TRG 0x00000019U /*!< DMAMUX TIM16 TRG request */ +#endif /* TIM16 */ +#ifdef DAC1 +#define LL_DMAMUX_REQ_DAC 0x0000001AU /*!< DMAMUX DAC request */ +#endif + +#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_DAC +/** + * @} + */ + +/** @defgroup DMAMUX_LL_EC_CHANNEL DMAMUX Channel + * @{ + */ +#define LL_DMAMUX_CHANNEL_0 0x00000000U /*!< DMAMUX Channel 0 connected to DMA1 Channel 1 */ +#define LL_DMAMUX_CHANNEL_1 0x00000001U /*!< DMAMUX Channel 1 connected to DMA1 Channel 2 */ +#define LL_DMAMUX_CHANNEL_2 0x00000002U /*!< DMAMUX Channel 2 connected to DMA1 Channel 3 */ +#define LL_DMAMUX_CHANNEL_3 0x00000003U /*!< DMAMUX Channel 3 connected to DMA1 Channel 4 */ +#define LL_DMAMUX_CHANNEL_4 0x00000004U /*!< DMAMUX Channel 4 connected to DMA1 Channel 5 */ +#define LL_DMAMUX_CHANNEL_5 0x00000005U /*!< DMAMUX Channel 5 connected to DMA1 Channel 6 */ +#define LL_DMAMUX_CHANNEL_6 0x00000006U /*!< DMAMUX Channel 6 connected to DMA1 Channel 7 */ +#define LL_DMAMUX_CHANNEL_7 0x00000007U /*!< DMAMUX Channel 7 connected to DMA1 Channel 8 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Macros DMAMUX Exported Macros + * @{ + */ + +/** @defgroup DMAMUX_LL_EM_WRITE_READ Common Write and read registers macros + * @{ + */ +/** + * @brief Write a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_DMAMUX_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in DMAMUX register + * @param __INSTANCE__ DMAMUX Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_DMAMUX_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup DMAMUX_LL_Exported_Functions DMAMUX Exported Functions + * @{ + */ + +/** @defgroup DMAMUX_LL_EF_Configuration Configuration + * @{ + */ +/** + * @brief Set DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 7 are mapped to DMA1 channel 1 to 8. + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_SetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @param Request This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_SPI3_RX + * @arg @ref LL_DMAMUX_REQ_SPI3_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_ADC1_DS + * @retval None + */ +__STATIC_INLINE void LL_DMAMUX_SetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel, uint32_t Request) +{ + (void)(DMAMUXx); + MODIFY_REG((DMAMUX1_Channel0 + Channel)->CxCR, DMAMUX_CxCR_DMAREQ_ID, Request); +} + +/** + * @brief Get DMAMUX request ID for DMAMUX Channel x. + * @note DMAMUX channel 0 to 7 are mapped to DMA1 channel 1 to 8. + * @rmtoll CxCR DMAREQ_ID LL_DMAMUX_GetRequestID + * @param DMAMUXx DMAMUXx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMAMUX_CHANNEL_0 + * @arg @ref LL_DMAMUX_CHANNEL_1 + * @arg @ref LL_DMAMUX_CHANNEL_2 + * @arg @ref LL_DMAMUX_CHANNEL_3 + * @arg @ref LL_DMAMUX_CHANNEL_4 + * @arg @ref LL_DMAMUX_CHANNEL_5 + * @arg @ref LL_DMAMUX_CHANNEL_6 + * @arg @ref LL_DMAMUX_CHANNEL_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_DMAMUX_REQ_MEM2MEM + * @arg @ref LL_DMAMUX_REQ_SPI3_RX + * @arg @ref LL_DMAMUX_REQ_SPI3_TX + * @arg @ref LL_DMAMUX_REQ_SPI1_RX + * @arg @ref LL_DMAMUX_REQ_SPI1_TX + * @arg @ref LL_DMAMUX_REQ_I2C1_RX + * @arg @ref LL_DMAMUX_REQ_I2C1_TX + * @arg @ref LL_DMAMUX_REQ_I2C2_RX + * @arg @ref LL_DMAMUX_REQ_I2C2_TX + * @arg @ref LL_DMAMUX_REQ_USART1_RX + * @arg @ref LL_DMAMUX_REQ_USART1_TX + * @arg @ref LL_DMAMUX_REQ_LPUART1_RX + * @arg @ref LL_DMAMUX_REQ_LPUART1_TX + * @arg @ref LL_DMAMUX_REQ_ADC1_DS + */ +__STATIC_INLINE uint32_t LL_DMAMUX_GetRequestID(DMAMUX_Channel_TypeDef *DMAMUXx, uint32_t Channel) +{ + (void)(DMAMUXx); + return (uint32_t)(READ_BIT((DMAMUX1_Channel0 + Channel)->CxCR, DMAMUX_CxCR_DMAREQ_ID)); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMAMUX1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_DMAMUX_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_gpio.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_gpio.h new file mode 100644 index 0000000000..97d069d59a --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_gpio.h @@ -0,0 +1,951 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_gpio.h + * @author MCD Application Team + * @brief Header file of GPIO LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_GPIO_H +#define STM32WL3x_LL_GPIO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" +#include "stm32wl3x_ll_pwr.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) + +/** @defgroup GPIO_LL GPIO + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-18.1_d - Medium: Array pointer `GPIOx' is accessed with index [..,..] + * which may be out of array bounds [..,UNKNOWN] in following APIs: + * LL_GPIO_GetAFPin_0_7 + * LL_GPIO_SetAFPin_0_7 + * LL_GPIO_SetAFPin_8_15 + * LL_GPIO_GetAFPin_8_15 + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros + * @{ + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures + * @{ + */ + +/** + * @brief LL GPIO Init Structure definition + */ +typedef struct +{ + uint32_t Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_LL_EC_PIN */ + + uint32_t Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_MODE. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/ + + uint32_t Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_SPEED. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/ + + uint32_t OutputType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_OUTPUT. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/ + + uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_PULL. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/ + + uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins. + This parameter can be a value of @ref GPIO_LL_EC_AF. + + GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/ +} LL_GPIO_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants + * @{ + */ + +/** @defgroup GPIO_LL_EC_PIN PIN + * @{ + */ +#define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */ +#define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */ +#define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */ +#define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */ +#define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */ +#define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */ +#define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */ +#define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */ +#define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */ +#define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */ +#define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */ +#define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */ +#define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */ +#define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */ +#define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */ +#define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */ +#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \ + GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \ + GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \ + GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \ + GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \ + GPIO_BSRR_BS15) /*!< Select all pins */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_MODE Mode + * @{ + */ +#define LL_GPIO_MODE_INPUT (0x00000000U) /*!< Select input mode */ +#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */ +#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */ +#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_OUTPUT Output Type + * @{ + */ +#define LL_GPIO_OUTPUT_PUSHPULL (0x00000000U) /*!< Select push-pull as output type */ +#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_SPEED Output Speed + * @{ + */ +#define LL_GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< Select I/O low output speed */ +#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */ +#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */ +#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down + * @{ + */ +#define LL_GPIO_PULL_NO (0x00000000U) /*!< Select I/O no pull */ +#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */ +#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */ +/** + * @} + */ + +/** @defgroup GPIO_LL_EC_AF Alternate Function + * @{ + */ +#define LL_GPIO_AF_0 (0x0000000U) /*!< Select alternate function 0 */ +#define LL_GPIO_AF_1 (0x0000001U) /*!< Select alternate function 1 */ +#define LL_GPIO_AF_2 (0x0000002U) /*!< Select alternate function 2 */ +#define LL_GPIO_AF_3 (0x0000003U) /*!< Select alternate function 3 */ +#define LL_GPIO_AF_4 (0x0000004U) /*!< Select alternate function 4 */ +#define LL_GPIO_AF_5 (0x0000005U) /*!< Select alternate function 5 */ +#define LL_GPIO_AF_6 (0x0000006U) /*!< Select alternate function 6 */ +#define LL_GPIO_AF_7 (0x0000007U) /*!< Select alternate function 7 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros + * @{ + */ + +/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in GPIO register + * @param __INSTANCE__ GPIO Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions + * @{ + */ + +/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration + * @{ + */ + +/** + * @brief Configure gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_SetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) +{ + MODIFY_REG(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0), ((Pin * Pin) * Mode)); +} + +/** + * @brief Return gpio mode for a dedicated pin on dedicated port. + * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll MODER MODEy LL_GPIO_GetPinMode + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_MODE_INPUT + * @arg @ref LL_GPIO_MODE_OUTPUT + * @arg @ref LL_GPIO_MODE_ALTERNATE + * @arg @ref LL_GPIO_MODE_ANALOG + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODE0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @param OutputType This parameter can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) +{ + MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); +} + +/** + * @brief Return gpio output type for several pins on dedicated port. + * @note Output type as to be set when gpio pin is in output or + * alternate modes. Possible type are Push-pull or Open-drain. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_OUTPUT_PUSHPULL + * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) / Pin); +} + +/** + * @brief Configure gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Speed This parameter can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) +{ + MODIFY_REG(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0), ((Pin * Pin) * Speed)); +} + +/** + * @brief Return gpio speed for a dedicated pin on dedicated port. + * @note I/O speed can be Low, Medium, Fast or High speed. + * @note Warning: only one pin can be passed as parameter. + * @note Refer to datasheet for frequency specifications and the power + * supply and load conditions for each speed. + * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_SPEED_FREQ_LOW + * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM + * @arg @ref LL_GPIO_SPEED_FREQ_HIGH + * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->OSPEEDR, ((Pin * Pin) * GPIO_OSPEEDR_OSPEED0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port. + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Pull This parameter can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) +{ + MODIFY_REG(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0), ((Pin * Pin) * Pull)); +} + +/** + * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port + * @note Warning: only one pin can be passed as parameter. + * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_PULL_NO + * @arg @ref LL_GPIO_PULL_UP + * @arg @ref LL_GPIO_PULL_DOWN + */ +__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->PUPDR, ((Pin * Pin) * GPIO_PUPDR_PUPD0)) / (Pin * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @note AF5 and AF7 are not applicable for STM32WL33. + * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[0], ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0), + ((((Pin * Pin) * Pin) * Pin) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port. + * @note AF5 and AF7 are not applicable for STM32WL33. + * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[0], + ((((Pin * Pin) * Pin) * Pin) * GPIO_AFRL_AFSEL0)) / (((Pin * Pin) * Pin) * Pin)); +} + +/** + * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @note Warning: only one pin can be passed as parameter. + * @note AF5 and AF7 are not applicable for STM32WL33. + * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @param Alternate This parameter can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) +{ + MODIFY_REG(GPIOx->AFR[1], (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8), + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * Alternate)); +} + +/** + * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port. + * @note Possible values are from AF0 to AF7 depending on target. + * @note AF5 and AF7 are not applicable for STM32WL33. + * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15 + * @param GPIOx GPIO Port + * @param Pin This parameter can be one of the following values: + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @retval Returned value can be one of the following values: + * @arg @ref LL_GPIO_AF_0 + * @arg @ref LL_GPIO_AF_1 + * @arg @ref LL_GPIO_AF_2 + * @arg @ref LL_GPIO_AF_3 + * @arg @ref LL_GPIO_AF_4 + * @arg @ref LL_GPIO_AF_5 + * @arg @ref LL_GPIO_AF_6 + * @arg @ref LL_GPIO_AF_7 + */ +__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin) +{ + return (uint32_t)(READ_BIT(GPIOx->AFR[1], + (((((Pin >> 8U) * (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U)) * GPIO_AFRH_AFSEL8)) / ((((Pin >> 8U) * + (Pin >> 8U)) * (Pin >> 8U)) * (Pin >> 8U))); +} + + +/** + * @brief Lock configuration of several pins for a dedicated port. + * @note When the lock sequence has been applied on a port bit, the + * value of this port bit can no longer be modified until the + * next reset. + * @note Each lock bit freezes a specific configuration register + * (control and alternate function registers). + * @rmtoll LCKR LCKK LL_GPIO_LockPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + __IO uint32_t temp; + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + WRITE_REG(GPIOx->LCKR, PinMask); + WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask); + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + temp = READ_REG(GPIOx->LCKR); + (void) temp; +} + +/** + * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0. + * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->LCKR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0. + * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked + * @param GPIOx GPIO Port + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx) +{ + return ((READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup GPIO_LL_EF_Data_Access Data Access + * @{ + */ + +/** + * @brief Return full input data register value for a dedicated port. + * @rmtoll IDR IDy LL_GPIO_ReadInputPort + * @param GPIOx GPIO Port + * @retval Input data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->IDR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll IDR IDy LL_GPIO_IsInputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->IDR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Write output data register for the port. + * @rmtoll ODR ODy LL_GPIO_WriteOutputPort + * @param GPIOx GPIO Port + * @param PortValue Level value for each pin of the port + * @retval None + */ +__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue) +{ + WRITE_REG(GPIOx->ODR, PortValue); +} + +/** + * @brief Return full output data register value for a dedicated port. + * @rmtoll ODR ODy LL_GPIO_ReadOutputPort + * @param GPIOx GPIO Port + * @retval Output data register value of port + */ +__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx) +{ + return (uint32_t)(READ_REG(GPIOx->ODR)); +} + +/** + * @brief Return if input data level for several pins of dedicated port is high or low. + * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + return ((READ_BIT(GPIOx->ODR, PinMask) == (PinMask)) ? 1UL : 0UL); +} + +/** + * @brief Set several pins to high level on dedicated gpio port. + * @rmtoll BSRR BSy LL_GPIO_SetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BSRR, PinMask); +} + +/** + * @brief Set several pins to low level on dedicated gpio port. + * @rmtoll BRR BRy LL_GPIO_ResetOutputPin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + WRITE_REG(GPIOx->BRR, PinMask); +} + +/** + * @brief Toggle data value for several pin of dedicated port. + * @rmtoll ODR ODy LL_GPIO_TogglePin + * @param GPIOx GPIO Port + * @param PinMask This parameter can be a combination of the following values: + * @arg @ref LL_GPIO_PIN_0 + * @arg @ref LL_GPIO_PIN_1 + * @arg @ref LL_GPIO_PIN_2 + * @arg @ref LL_GPIO_PIN_3 + * @arg @ref LL_GPIO_PIN_4 + * @arg @ref LL_GPIO_PIN_5 + * @arg @ref LL_GPIO_PIN_6 + * @arg @ref LL_GPIO_PIN_7 + * @arg @ref LL_GPIO_PIN_8 + * @arg @ref LL_GPIO_PIN_9 + * @arg @ref LL_GPIO_PIN_10 + * @arg @ref LL_GPIO_PIN_11 + * @arg @ref LL_GPIO_PIN_12 + * @arg @ref LL_GPIO_PIN_13 + * @arg @ref LL_GPIO_PIN_14 + * @arg @ref LL_GPIO_PIN_15 + * @arg @ref LL_GPIO_PIN_ALL + * @retval None + */ +__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask) +{ + uint32_t odr = READ_REG(GPIOx->ODR); + WRITE_REG(GPIOx->BSRR, ((odr & PinMask) << 16u) | (~odr & PinMask)); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx); +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct); +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) */ +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_GPIO_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_i2c.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_i2c.h new file mode 100644 index 0000000000..95c3b1ee91 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_i2c.h @@ -0,0 +1,2239 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_i2c.h + * @author MCD Application Team + * @brief Header file of I2C LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_I2C_H +#define STM32WL3x_LL_I2C_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2C_LL_Private_Constants I2C Private Constants + * @{ + */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_Private_Macros I2C Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_ES_INIT I2C Exported Init structure + * @{ + */ +typedef struct +{ + uint32_t PeripheralMode; /*!< Specifies the peripheral mode. + This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetMode(). */ + + uint32_t Timing; /*!< Specifies the SDA setup, hold time and the SCL high, low period values. + This parameter must be set by referring to the STM32CubeMX Tool and + the helper macro @ref __LL_I2C_CONVERT_TIMINGS(). + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetTiming(). */ + + uint32_t AnalogFilter; /*!< Enables or disables analog noise filter. + This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION. + + This feature can be modified afterwards using unitary functions + @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */ + + uint32_t DigitalFilter; /*!< Configures the digital noise filter. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetDigitalFilter(). */ + + uint32_t OwnAddress1; /*!< Specifies the device own address 1. + This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ + + uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive + match code or next received byte. + This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_AcknowledgeNextData(). */ + + uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit). + This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1. + + This feature can be modified afterwards using unitary function + @ref LL_I2C_SetOwnAddress1(). */ +} LL_I2C_InitTypeDef; +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Constants I2C Exported Constants + * @{ + */ + +/** @defgroup I2C_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_I2C_WriteReg function + * @{ + */ +#define LL_I2C_ICR_ADDRCF I2C_ICR_ADDRCF /*!< Address Matched flag */ +#define LL_I2C_ICR_NACKCF I2C_ICR_NACKCF /*!< Not Acknowledge flag */ +#define LL_I2C_ICR_STOPCF I2C_ICR_STOPCF /*!< Stop detection flag */ +#define LL_I2C_ICR_BERRCF I2C_ICR_BERRCF /*!< Bus error flag */ +#define LL_I2C_ICR_ARLOCF I2C_ICR_ARLOCF /*!< Arbitration Lost flag */ +#define LL_I2C_ICR_OVRCF I2C_ICR_OVRCF /*!< Overrun/Underrun flag */ +#define LL_I2C_ICR_PECCF I2C_ICR_PECCF /*!< PEC error flag */ +#define LL_I2C_ICR_TIMOUTCF I2C_ICR_TIMOUTCF /*!< Timeout detection flag */ +#define LL_I2C_ICR_ALERTCF I2C_ICR_ALERTCF /*!< Alert flag */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2C_ReadReg function + * @{ + */ +#define LL_I2C_ISR_TXE I2C_ISR_TXE /*!< Transmit data register empty */ +#define LL_I2C_ISR_TXIS I2C_ISR_TXIS /*!< Transmit interrupt status */ +#define LL_I2C_ISR_RXNE I2C_ISR_RXNE /*!< Receive data register not empty */ +#define LL_I2C_ISR_ADDR I2C_ISR_ADDR /*!< Address matched (slave mode) */ +#define LL_I2C_ISR_NACKF I2C_ISR_NACKF /*!< Not Acknowledge received flag */ +#define LL_I2C_ISR_STOPF I2C_ISR_STOPF /*!< Stop detection flag */ +#define LL_I2C_ISR_TC I2C_ISR_TC /*!< Transfer Complete (master mode) */ +#define LL_I2C_ISR_TCR I2C_ISR_TCR /*!< Transfer Complete Reload */ +#define LL_I2C_ISR_BERR I2C_ISR_BERR /*!< Bus error */ +#define LL_I2C_ISR_ARLO I2C_ISR_ARLO /*!< Arbitration lost */ +#define LL_I2C_ISR_OVR I2C_ISR_OVR /*!< Overrun/Underrun (slave mode) */ +#define LL_I2C_ISR_PECERR I2C_ISR_PECERR /*!< PEC Error in reception (SMBus mode) */ +#define LL_I2C_ISR_TIMEOUT I2C_ISR_TIMEOUT /*!< Timeout detection flag (SMBus mode) */ +#define LL_I2C_ISR_ALERT I2C_ISR_ALERT /*!< SMBus alert (SMBus mode) */ +#define LL_I2C_ISR_BUSY I2C_ISR_BUSY /*!< Bus busy */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_I2C_ReadReg and LL_I2C_WriteReg functions + * @{ + */ +#define LL_I2C_CR1_TXIE I2C_CR1_TXIE /*!< TX Interrupt enable */ +#define LL_I2C_CR1_RXIE I2C_CR1_RXIE /*!< RX Interrupt enable */ +#define LL_I2C_CR1_ADDRIE I2C_CR1_ADDRIE /*!< Address match Interrupt enable (slave only) */ +#define LL_I2C_CR1_NACKIE I2C_CR1_NACKIE /*!< Not acknowledge received Interrupt enable */ +#define LL_I2C_CR1_STOPIE I2C_CR1_STOPIE /*!< STOP detection Interrupt enable */ +#define LL_I2C_CR1_TCIE I2C_CR1_TCIE /*!< Transfer Complete interrupt enable */ +#define LL_I2C_CR1_ERRIE I2C_CR1_ERRIE /*!< Error interrupts enable */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode + * @{ + */ +#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */ +#define LL_I2C_MODE_SMBUS_HOST I2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */ +#define LL_I2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode + (Default address not acknowledge) */ +#define LL_I2C_MODE_SMBUS_DEVICE_ARP I2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ANALOGFILTER_SELECTION Analog Filter Selection + * @{ + */ +#define LL_I2C_ANALOGFILTER_ENABLE 0x00000000U /*!< Analog filter is enabled. */ +#define LL_I2C_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF /*!< Analog filter is disabled. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRESSING_MODE Master Addressing Mode + * @{ + */ +#define LL_I2C_ADDRESSING_MODE_7BIT 0x00000000U /*!< Master operates in 7-bit addressing mode. */ +#define LL_I2C_ADDRESSING_MODE_10BIT I2C_CR2_ADD10 /*!< Master operates in 10-bit addressing mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS1 Own Address 1 Length + * @{ + */ +#define LL_I2C_OWNADDRESS1_7BIT 0x00000000U /*!< Own address 1 is a 7-bit address. */ +#define LL_I2C_OWNADDRESS1_10BIT I2C_OAR1_OA1MODE /*!< Own address 1 is a 10-bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_OWNADDRESS2 Own Address 2 Masks + * @{ + */ +#define LL_I2C_OWNADDRESS2_NOMASK I2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */ +#define LL_I2C_OWNADDRESS2_MASK01 I2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK02 I2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK03 I2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK04 I2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK05 I2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK06 I2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */ +#define LL_I2C_OWNADDRESS2_MASK07 I2C_OAR2_OA2MASK07 /*!< No comparison is done. + All Address2 are acknowledged. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_I2C_ACKNOWLEDGE Acknowledge Generation + * @{ + */ +#define LL_I2C_ACK 0x00000000U /*!< ACK is sent after current received byte. */ +#define LL_I2C_NACK I2C_CR2_NACK /*!< NACK is sent after current received byte.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_ADDRSLAVE Slave Address Length + * @{ + */ +#define LL_I2C_ADDRSLAVE_7BIT 0x00000000U /*!< Slave Address in 7-bit. */ +#define LL_I2C_ADDRSLAVE_10BIT I2C_CR2_ADD10 /*!< Slave Address in 10-bit.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_REQUEST Transfer Request Direction + * @{ + */ +#define LL_I2C_REQUEST_WRITE 0x00000000U /*!< Master request a write transfer. */ +#define LL_I2C_REQUEST_READ I2C_CR2_RD_WRN /*!< Master request a read transfer. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_MODE Transfer End Mode + * @{ + */ +#define LL_I2C_MODE_RELOAD I2C_CR2_RELOAD /*!< Enable I2C Reload mode. */ +#define LL_I2C_MODE_AUTOEND I2C_CR2_AUTOEND /*!< Enable I2C Automatic end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SOFTEND 0x00000000U /*!< Enable I2C Software end mode + with no HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_RELOAD LL_I2C_MODE_RELOAD /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC LL_I2C_MODE_AUTOEND /*!< Enable SMBUS Automatic end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC LL_I2C_MODE_SOFTEND /*!< Enable SMBUS Software end mode + with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Automatic end mode with HW PEC comparison. */ +#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE) +/*!< Enable SMBUS Software end mode with HW PEC comparison. */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_GENERATE Start And Stop Generation + * @{ + */ +#define LL_I2C_GENERATE_NOSTARTSTOP 0x00000000U +/*!< Don't Generate Stop and Start condition. */ +#define LL_I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) +/*!< Generate Stop condition (Size should be set to 0). */ +#define LL_I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Start for read request. */ +#define LL_I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Start for write request. */ +#define LL_I2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) +/*!< Generate Restart for read request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 7Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | \ + I2C_CR2_RD_WRN | I2C_CR2_HEAD10R) +/*!< Generate Restart for read request, slave 10Bit address. */ +#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) +/*!< Generate Restart for write request, slave 10Bit address.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction + * @{ + */ +#define LL_I2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master, + slave enters receiver mode. */ +#define LL_I2C_DIRECTION_READ I2C_ISR_DIR /*!< Read transfer request by master, + slave enters transmitter mode.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_I2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for + transmission */ +#define LL_I2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for + reception */ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect + SCL low level timeout. */ +#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect + both SCL and SDA high level timeout.*/ +/** + * @} + */ + +/** @defgroup I2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection + * @{ + */ +#define LL_I2C_SMBUS_TIMEOUTA I2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */ +#define LL_I2C_SMBUS_TIMEOUTB I2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock) + enable bit */ +#define LL_I2C_SMBUS_ALL_TIMEOUT (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | \ + I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB +(extended clock) enable bits */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Macros I2C Exported Macros + * @{ + */ + +/** @defgroup I2C_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2C_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2C register + * @param __INSTANCE__ I2C Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2C_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup I2C_LL_EM_CONVERT_TIMINGS Convert SDA SCL timings + * @{ + */ +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @param __PRESCALER__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + * @param __SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tscldel = (SCLDEL+1)xtpresc) + * @param __HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. + (tsdadel = SDADELxtpresc) + * @param __SCLH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tsclh = (SCLH+1)xtpresc) + * @param __SCLL_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. + (tscll = (SCLL+1)xtpresc) + * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF + */ +#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __SETUP_TIME__, __HOLD_TIME__, __SCLH_PERIOD__, __SCLL_PERIOD__) \ + ((((uint32_t)(__PRESCALER__) << I2C_TIMINGR_PRESC_Pos) & I2C_TIMINGR_PRESC) | \ + (((uint32_t)(__SETUP_TIME__) << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL) | \ + (((uint32_t)(__HOLD_TIME__) << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL) | \ + (((uint32_t)(__SCLH_PERIOD__) << I2C_TIMINGR_SCLH_Pos) & I2C_TIMINGR_SCLH) | \ + (((uint32_t)(__SCLL_PERIOD__) << I2C_TIMINGR_SCLL_Pos) & I2C_TIMINGR_SCLL)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup I2C_LL_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable I2C peripheral (PE = 1). + * @rmtoll CR1 PE LL_I2C_Enable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Enable(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Disable I2C peripheral (PE = 0). + * @note When PE = 0, the I2C SCL and SDA lines are released. + * Internal state machines and status bits are put back to their reset value. + * When cleared, PE must be kept low for at least 3 APB clock cycles. + * @rmtoll CR1 PE LL_I2C_Disable + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_Disable(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PE); +} + +/** + * @brief Check if the I2C peripheral is enabled or disabled. + * @rmtoll CR1 PE LL_I2C_IsEnabled + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabled(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PE) == (I2C_CR1_PE)) ? 1UL : 0UL); +} + +/** + * @brief Configure Noise Filters (Analog and Digital). + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * The filters can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_ConfigFilters\n + * CR1 DNF LL_I2C_ConfigFilters + * @param I2Cx I2C Instance. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref LL_I2C_ANALOGFILTER_ENABLE + * @arg @ref LL_I2C_ANALOGFILTER_DISABLE + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilter, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_ANFOFF | I2C_CR1_DNF, AnalogFilter | (DigitalFilter << I2C_CR1_DNF_Pos)); +} + +/** + * @brief Configure Digital Noise Filter. + * @note If the analog filter is also enabled, the digital filter is added to analog filter. + * This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 DNF LL_I2C_SetDigitalFilter + * @param I2Cx I2C Instance. + * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) + and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk). + * This parameter is used to configure the digital noise filter on SDA and SCL input. + * The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetDigitalFilter(I2C_TypeDef *I2Cx, uint32_t DigitalFilter) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_DNF, DigitalFilter << I2C_CR1_DNF_Pos); +} + +/** + * @brief Get the current Digital Noise Filter configuration. + * @rmtoll CR1 DNF LL_I2C_GetDigitalFilter + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDigitalFilter(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_DNF) >> I2C_CR1_DNF_Pos); +} + +/** + * @brief Enable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_EnableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAnalogFilter(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Disable Analog Noise Filter. + * @note This filter can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 ANFOFF LL_I2C_DisableAnalogFilter + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAnalogFilter(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ANFOFF); +} + +/** + * @brief Check if Analog Noise Filter is enabled or disabled. + * @rmtoll CR1 ANFOFF LL_I2C_IsEnabledAnalogFilter + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAnalogFilter(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ANFOFF) != (I2C_CR1_ANFOFF)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_EnableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Disable DMA transmission requests. + * @rmtoll CR1 TXDMAEN LL_I2C_DisableDMAReq_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN); +} + +/** + * @brief Check if DMA transmission requests are enabled or disabled. + * @rmtoll CR1 TXDMAEN LL_I2C_IsEnabledDMAReq_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_TX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXDMAEN) == (I2C_CR1_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_EnableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Disable DMA reception requests. + * @rmtoll CR1 RXDMAEN LL_I2C_DisableDMAReq_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableDMAReq_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN); +} + +/** + * @brief Check if DMA reception requests are enabled or disabled. + * @rmtoll CR1 RXDMAEN LL_I2C_IsEnabledDMAReq_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledDMAReq_RX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXDMAEN) == (I2C_CR1_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll TXDR TXDATA LL_I2C_DMA_GetRegAddr\n + * RXDR RXDATA LL_I2C_DMA_GetRegAddr + * @param I2Cx I2C Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_I2C_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_I2C_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_I2C_DMA_GetRegAddr(const I2C_TypeDef *I2Cx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_I2C_DMA_REG_DATA_TRANSMIT) + { + /* return address of TXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->TXDR); + } + else + { + /* return address of RXDR register */ + data_reg_addr = (uint32_t) &(I2Cx->RXDR); + } + + return data_reg_addr; +} + +/** + * @brief Enable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_EnableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableClockStretching(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Disable Clock stretching. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll CR1 NOSTRETCH LL_I2C_DisableClockStretching + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableClockStretching(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH); +} + +/** + * @brief Check if Clock stretching is enabled or disabled. + * @rmtoll CR1 NOSTRETCH LL_I2C_IsEnabledClockStretching + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledClockStretching(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NOSTRETCH) != (I2C_CR1_NOSTRETCH)) ? 1UL : 0UL); +} + +/** + * @brief Enable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_EnableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Disable hardware byte control in slave mode. + * @rmtoll CR1 SBC LL_I2C_DisableSlaveByteControl + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSlaveByteControl(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_SBC); +} + +/** + * @brief Check if hardware byte control in slave mode is enabled or disabled. + * @rmtoll CR1 SBC LL_I2C_IsEnabledSlaveByteControl + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSlaveByteControl(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_SBC) == (I2C_CR1_SBC)) ? 1UL : 0UL); +} + +/** + * @brief Enable General Call. + * @note When enabled the Address 0x00 is ACKed. + * @rmtoll CR1 GCEN LL_I2C_EnableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableGeneralCall(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Disable General Call. + * @note When disabled the Address 0x00 is NACKed. + * @rmtoll CR1 GCEN LL_I2C_DisableGeneralCall + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableGeneralCall(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_GCEN); +} + +/** + * @brief Check if General Call is enabled or disabled. + * @rmtoll CR1 GCEN LL_I2C_IsEnabledGeneralCall + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledGeneralCall(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_GCEN) == (I2C_CR1_GCEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the Master to operate in 7-bit or 10-bit addressing mode. + * @note Changing this bit is not allowed, when the START bit is set. + * @rmtoll CR2 ADD10 LL_I2C_SetMasterAddressingMode + * @param I2Cx I2C Instance. + * @param AddressingMode This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMasterAddressingMode(I2C_TypeDef *I2Cx, uint32_t AddressingMode) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_ADD10, AddressingMode); +} + +/** + * @brief Get the Master addressing mode. + * @rmtoll CR2 ADD10 LL_I2C_GetMasterAddressingMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_ADDRESSING_MODE_7BIT + * @arg @ref LL_I2C_ADDRESSING_MODE_10BIT + */ +__STATIC_INLINE uint32_t LL_I2C_GetMasterAddressingMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_ADD10)); +} + +/** + * @brief Set the Own Address1. + * @rmtoll OAR1 OA1 LL_I2C_SetOwnAddress1\n + * OAR1 OA1MODE LL_I2C_SetOwnAddress1 + * @param I2Cx I2C Instance. + * @param OwnAddress1 This parameter must be a value between Min_Data=0 and Max_Data=0x3FF. + * @param OwnAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS1_7BIT + * @arg @ref LL_I2C_OWNADDRESS1_10BIT + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress1(I2C_TypeDef *I2Cx, uint32_t OwnAddress1, uint32_t OwnAddrSize) +{ + MODIFY_REG(I2Cx->OAR1, I2C_OAR1_OA1 | I2C_OAR1_OA1MODE, OwnAddress1 | OwnAddrSize); +} + +/** + * @brief Enable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_EnableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress1(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Disable acknowledge on Own Address1 match address. + * @rmtoll OAR1 OA1EN LL_I2C_DisableOwnAddress1 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress1(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR1 OA1EN LL_I2C_IsEnabledOwnAddress1 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress1(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR1, I2C_OAR1_OA1EN) == (I2C_OAR1_OA1EN)) ? 1UL : 0UL); +} + +/** + * @brief Set the 7bits Own Address2. + * @note This action has no effect if own address2 is enabled. + * @rmtoll OAR2 OA2 LL_I2C_SetOwnAddress2\n + * OAR2 OA2MSK LL_I2C_SetOwnAddress2 + * @param I2Cx I2C Instance. + * @param OwnAddress2 Value between Min_Data=0 and Max_Data=0x7F. + * @param OwnAddrMask This parameter can be one of the following values: + * @arg @ref LL_I2C_OWNADDRESS2_NOMASK + * @arg @ref LL_I2C_OWNADDRESS2_MASK01 + * @arg @ref LL_I2C_OWNADDRESS2_MASK02 + * @arg @ref LL_I2C_OWNADDRESS2_MASK03 + * @arg @ref LL_I2C_OWNADDRESS2_MASK04 + * @arg @ref LL_I2C_OWNADDRESS2_MASK05 + * @arg @ref LL_I2C_OWNADDRESS2_MASK06 + * @arg @ref LL_I2C_OWNADDRESS2_MASK07 + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetOwnAddress2(I2C_TypeDef *I2Cx, uint32_t OwnAddress2, uint32_t OwnAddrMask) +{ + MODIFY_REG(I2Cx->OAR2, I2C_OAR2_OA2 | I2C_OAR2_OA2MSK, OwnAddress2 | OwnAddrMask); +} + +/** + * @brief Enable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_EnableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableOwnAddress2(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Disable acknowledge on Own Address2 match address. + * @rmtoll OAR2 OA2EN LL_I2C_DisableOwnAddress2 + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableOwnAddress2(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN); +} + +/** + * @brief Check if Own Address1 acknowledge is enabled or disabled. + * @rmtoll OAR2 OA2EN LL_I2C_IsEnabledOwnAddress2 + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledOwnAddress2(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->OAR2, I2C_OAR2_OA2EN) == (I2C_OAR2_OA2EN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SDA setup, hold time and the SCL high, low period. + * @note This bit can only be programmed when the I2C is disabled (PE = 0). + * @rmtoll TIMINGR TIMINGR LL_I2C_SetTiming + * @param I2Cx I2C Instance. + * @param Timing This parameter must be a value between Min_Data=0 and Max_Data=0xFFFFFFFF. + * @note This parameter is computed with the STM32CubeMX Tool. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTiming(I2C_TypeDef *I2Cx, uint32_t Timing) +{ + WRITE_REG(I2Cx->TIMINGR, Timing); +} + +/** + * @brief Get the Timing Prescaler setting. + * @rmtoll TIMINGR PRESC LL_I2C_GetTimingPrescaler + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTimingPrescaler(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_PRESC) >> I2C_TIMINGR_PRESC_Pos); +} + +/** + * @brief Get the SCL low period setting. + * @rmtoll TIMINGR SCLL LL_I2C_GetClockLowPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockLowPeriod(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLL) >> I2C_TIMINGR_SCLL_Pos); +} + +/** + * @brief Get the SCL high period setting. + * @rmtoll TIMINGR SCLH LL_I2C_GetClockHighPeriod + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetClockHighPeriod(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLH) >> I2C_TIMINGR_SCLH_Pos); +} + +/** + * @brief Get the SDA hold time. + * @rmtoll TIMINGR SDADEL LL_I2C_GetDataHoldTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataHoldTime(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SDADEL) >> I2C_TIMINGR_SDADEL_Pos); +} + +/** + * @brief Get the SDA setup time. + * @rmtoll TIMINGR SCLDEL LL_I2C_GetDataSetupTime + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_I2C_GetDataSetupTime(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMINGR, I2C_TIMINGR_SCLDEL) >> I2C_TIMINGR_SCLDEL_Pos); +} + +/** + * @brief Configure peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_SetMode\n + * CR1 SMBDEN LL_I2C_SetMode + * @param I2Cx I2C Instance. + * @param PeripheralMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode) +{ + MODIFY_REG(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN, PeripheralMode); +} + +/** + * @brief Get peripheral mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 SMBHEN LL_I2C_GetMode\n + * CR1 SMBDEN LL_I2C_GetMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_MODE_I2C + * @arg @ref LL_I2C_MODE_SMBUS_HOST + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE + * @arg @ref LL_I2C_MODE_SMBUS_DEVICE_ARP + */ +__STATIC_INLINE uint32_t LL_I2C_GetMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR1, I2C_CR1_SMBHEN | I2C_CR1_SMBDEN)); +} + +/** + * @brief Enable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is drived low and + * Alert Response Address Header acknowledge is enabled. + * SMBus Host mode: + * - SMBus Alert pin management is supported. + * @rmtoll CR1 ALERTEN LL_I2C_EnableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Disable SMBus alert (Host or Device mode) + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note SMBus Device mode: + * - SMBus Alert pin is not drived (can be used as a standard GPIO) and + * Alert Response Address Header acknowledge is disabled. + * SMBus Host mode: + * - SMBus Alert pin management is not supported. + * @rmtoll CR1 ALERTEN LL_I2C_DisableSMBusAlert + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ALERTEN); +} + +/** + * @brief Check if SMBus alert (Host or Device mode) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 ALERTEN LL_I2C_IsEnabledSMBusAlert + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ALERTEN) == (I2C_CR1_ALERTEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_EnableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Disable SMBus Packet Error Calculation (PEC). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_DisableSMBusPEC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_PECEN); +} + +/** + * @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR1 PECEN LL_I2C_IsEnabledSMBusPEC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_PECEN) == (I2C_CR1_PECEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB). + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIDLE LL_I2C_ConfigSMBusTimeout\n + * TIMEOUTR TIMEOUTB LL_I2C_ConfigSMBusTimeout + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @param TimeoutB + * @retval None + */ +__STATIC_INLINE void LL_I2C_ConfigSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t TimeoutA, uint32_t TimeoutAMode, + uint32_t TimeoutB) +{ + MODIFY_REG(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA | I2C_TIMEOUTR_TIDLE | I2C_TIMEOUTR_TIMEOUTB, + TimeoutA | TimeoutAMode | (TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos)); +} + +/** + * @brief Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_SetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @param TimeoutA This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutA(I2C_TypeDef *I2Cx, uint32_t TimeoutA) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutA); +} + +/** + * @brief Get the SMBus Clock TimeoutA setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTA LL_I2C_GetSMBusTimeoutA + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutA(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTA)); +} + +/** + * @brief Set the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This bit can only be programmed when TimeoutA is disabled. + * @rmtoll TIMEOUTR TIDLE LL_I2C_SetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @param TimeoutAMode This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutAMode(I2C_TypeDef *I2Cx, uint32_t TimeoutAMode) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutAMode); +} + +/** + * @brief Get the SMBus Clock TimeoutA mode. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIDLE LL_I2C_GetSMBusTimeoutAMode + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW + * @arg @ref LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutAMode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIDLE)); +} + +/** + * @brief Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note These bits can only be programmed when TimeoutB is disabled. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_SetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @param TimeoutB This parameter must be a value between Min_Data=0 and Max_Data=0xFFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSMBusTimeoutB(I2C_TypeDef *I2Cx, uint32_t TimeoutB) +{ + WRITE_REG(I2Cx->TIMEOUTR, TimeoutB << I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Get the SMBus Extended Cumulative Clock TimeoutB setting. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMEOUTB LL_I2C_GetSMBusTimeoutB + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0 and Max_Data=0xFFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutB(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->TIMEOUTR, I2C_TIMEOUTR_TIMEOUTB) >> I2C_TIMEOUTR_TIMEOUTB_Pos); +} + +/** + * @brief Enable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_EnableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_EnableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + SET_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Disable the SMBus Clock Timeout. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_DisableSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_DisableSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + CLEAR_BIT(I2Cx->TIMEOUTR, ClockTimeout); +} + +/** + * @brief Check if the SMBus Clock Timeout is enabled or disabled. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll TIMEOUTR TIMOUTEN LL_I2C_IsEnabledSMBusTimeout\n + * TIMEOUTR TEXTEN LL_I2C_IsEnabledSMBusTimeout + * @param I2Cx I2C Instance. + * @param ClockTimeout This parameter can be one of the following values: + * @arg @ref LL_I2C_SMBUS_TIMEOUTA + * @arg @ref LL_I2C_SMBUS_TIMEOUTB + * @arg @ref LL_I2C_SMBUS_ALL_TIMEOUT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusTimeout(const I2C_TypeDef *I2Cx, uint32_t ClockTimeout) +{ + return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == \ + (ClockTimeout)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_EnableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Disable TXIS interrupt. + * @rmtoll CR1 TXIE LL_I2C_DisableIT_TX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TXIE); +} + +/** + * @brief Check if the TXIS Interrupt is enabled or disabled. + * @rmtoll CR1 TXIE LL_I2C_IsEnabledIT_TX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TXIE) == (I2C_CR1_TXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_EnableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_RX(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Disable RXNE interrupt. + * @rmtoll CR1 RXIE LL_I2C_DisableIT_RX + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_RX(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_RXIE); +} + +/** + * @brief Check if the RXNE Interrupt is enabled or disabled. + * @rmtoll CR1 RXIE LL_I2C_IsEnabledIT_RX + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_RX(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_RXIE) == (I2C_CR1_RXIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_EnableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Disable Address match interrupt (slave mode only). + * @rmtoll CR1 ADDRIE LL_I2C_DisableIT_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ADDR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ADDRIE); +} + +/** + * @brief Check if Address match interrupt is enabled or disabled. + * @rmtoll CR1 ADDRIE LL_I2C_IsEnabledIT_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ADDRIE) == (I2C_CR1_ADDRIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_EnableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Disable Not acknowledge received interrupt. + * @rmtoll CR1 NACKIE LL_I2C_DisableIT_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_NACK(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_NACKIE); +} + +/** + * @brief Check if Not acknowledge received interrupt is enabled or disabled. + * @rmtoll CR1 NACKIE LL_I2C_IsEnabledIT_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_NACK(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_NACKIE) == (I2C_CR1_NACKIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_EnableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Disable STOP detection interrupt. + * @rmtoll CR1 STOPIE LL_I2C_DisableIT_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_STOP(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_STOPIE); +} + +/** + * @brief Check if STOP detection interrupt is enabled or disabled. + * @rmtoll CR1 STOPIE LL_I2C_IsEnabledIT_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_STOPIE) == (I2C_CR1_STOPIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_EnableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_TC(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Disable Transfer Complete interrupt. + * @note Any of these events will generate interrupt : + * Transfer Complete (TC) + * Transfer Complete Reload (TCR) + * @rmtoll CR1 TCIE LL_I2C_DisableIT_TC + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_TC(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_TCIE); +} + +/** + * @brief Check if Transfer Complete interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_I2C_IsEnabledIT_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_TCIE) == (I2C_CR1_TCIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_EnableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Disable Error interrupts. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note Any of these errors will generate interrupt : + * Arbitration Loss (ARLO) + * Bus Error detection (BERR) + * Overrun/Underrun (OVR) + * SMBus Timeout detection (TIMEOUT) + * SMBus PEC error detection (PECERR) + * SMBus Alert pin event detection (ALERT) + * @rmtoll CR1 ERRIE LL_I2C_DisableIT_ERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableIT_ERR(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR1, I2C_CR1_ERRIE); +} + +/** + * @brief Check if Error interrupts are enabled or disabled. + * @rmtoll CR1 ERRIE LL_I2C_IsEnabledIT_ERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_ERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR1, I2C_CR1_ERRIE) == (I2C_CR1_ERRIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_FLAG_management FLAG_management + * @{ + */ + +/** + * @brief Indicate the status of Transmit data register empty flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXE LL_I2C_IsActiveFlag_TXE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXE(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXE) == (I2C_ISR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transmit interrupt flag. + * @note RESET: When next data is written in Transmit data register. + * SET: When Transmit data register is empty. + * @rmtoll ISR TXIS LL_I2C_IsActiveFlag_TXIS + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TXIS(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TXIS) == (I2C_ISR_TXIS)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Receive data register not empty flag. + * @note RESET: When Receive data register is read. + * SET: When the received data is copied in Receive data register. + * @rmtoll ISR RXNE LL_I2C_IsActiveFlag_RXNE + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_RXNE(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_RXNE) == (I2C_ISR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Address matched flag (slave mode). + * @note RESET: Clear default value. + * SET: When the received slave address matched with one of the enabled slave address. + * @rmtoll ISR ADDR LL_I2C_IsActiveFlag_ADDR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ADDR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ADDR) == (I2C_ISR_ADDR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Not Acknowledge received flag. + * @note RESET: Clear default value. + * SET: When a NACK is received after a byte transmission. + * @rmtoll ISR NACKF LL_I2C_IsActiveFlag_NACK + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_NACK(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_NACKF) == (I2C_ISR_NACKF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Stop detection flag. + * @note RESET: Clear default value. + * SET: When a Stop condition is detected. + * @rmtoll ISR STOPF LL_I2C_IsActiveFlag_STOP + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_STOP(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_STOPF) == (I2C_ISR_STOPF)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=0, AUTOEND=0 and NBYTES date have been transferred. + * @rmtoll ISR TC LL_I2C_IsActiveFlag_TC + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TC(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TC) == (I2C_ISR_TC)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Transfer complete flag (master mode). + * @note RESET: Clear default value. + * SET: When RELOAD=1 and NBYTES date have been transferred. + * @rmtoll ISR TCR LL_I2C_IsActiveFlag_TCR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_TCR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TCR) == (I2C_ISR_TCR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus error flag. + * @note RESET: Clear default value. + * SET: When a misplaced Start or Stop condition is detected. + * @rmtoll ISR BERR LL_I2C_IsActiveFlag_BERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BERR) == (I2C_ISR_BERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Arbitration lost flag. + * @note RESET: Clear default value. + * SET: When arbitration lost. + * @rmtoll ISR ARLO LL_I2C_IsActiveFlag_ARLO + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_ARLO(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ARLO) == (I2C_ISR_ARLO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Overrun/Underrun flag (slave mode). + * @note RESET: Clear default value. + * SET: When an overrun/underrun error occurs (Clock Stretching Disabled). + * @rmtoll ISR OVR LL_I2C_IsActiveFlag_OVR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_OVR) == (I2C_ISR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus PEC error flag in reception. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When the received PEC does not match with the PEC register content. + * @rmtoll ISR PECERR LL_I2C_IsActiveSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_PECERR) == (I2C_ISR_PECERR)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When a timeout or extended clock timeout occurs. + * @rmtoll ISR TIMEOUT LL_I2C_IsActiveSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_TIMEOUT) == (I2C_ISR_TIMEOUT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of SMBus alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note RESET: Clear default value. + * SET: When SMBus host configuration, SMBus alert enabled and + * a falling edge event occurs on SMBA pin. + * @rmtoll ISR ALERT LL_I2C_IsActiveSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_ALERT(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_ALERT) == (I2C_ISR_ALERT)) ? 1UL : 0UL); +} + +/** + * @brief Indicate the status of Bus Busy flag. + * @note RESET: Clear default value. + * SET: When a Start condition is detected. + * @rmtoll ISR BUSY LL_I2C_IsActiveFlag_BUSY + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_BUSY(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->ISR, I2C_ISR_BUSY) == (I2C_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Clear Address Matched flag. + * @rmtoll ICR ADDRCF LL_I2C_ClearFlag_ADDR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ADDR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ADDRCF); +} + +/** + * @brief Clear Not Acknowledge flag. + * @rmtoll ICR NACKCF LL_I2C_ClearFlag_NACK + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_NACK(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_NACKCF); +} + +/** + * @brief Clear Stop detection flag. + * @rmtoll ICR STOPCF LL_I2C_ClearFlag_STOP + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_STOP(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_STOPCF); +} + +/** + * @brief Clear Transmit data register empty flag (TXE). + * @note This bit can be clear by software in order to flush the transmit data register (TXDR). + * @rmtoll ISR TXE LL_I2C_ClearFlag_TXE + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_TXE(I2C_TypeDef *I2Cx) +{ + WRITE_REG(I2Cx->ISR, I2C_ISR_TXE); +} + +/** + * @brief Clear Bus error flag. + * @rmtoll ICR BERRCF LL_I2C_ClearFlag_BERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_BERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_BERRCF); +} + +/** + * @brief Clear Arbitration lost flag. + * @rmtoll ICR ARLOCF LL_I2C_ClearFlag_ARLO + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_ARLO(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ARLOCF); +} + +/** + * @brief Clear Overrun/Underrun flag. + * @rmtoll ICR OVRCF LL_I2C_ClearFlag_OVR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_OVRCF); +} + +/** + * @brief Clear SMBus PEC error flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR PECCF LL_I2C_ClearSMBusFlag_PECERR + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_PECCF); +} + +/** + * @brief Clear SMBus Timeout detection flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR TIMOUTCF LL_I2C_ClearSMBusFlag_TIMEOUT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_TIMOUTCF); +} + +/** + * @brief Clear SMBus Alert flag. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll ICR ALERTCF LL_I2C_ClearSMBusFlag_ALERT + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_ClearSMBusFlag_ALERT(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->ICR, I2C_ICR_ALERTCF); +} + +/** + * @} + */ + +/** @defgroup I2C_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Enable automatic STOP condition generation (master mode). + * @note Automatic end mode : a STOP condition is automatically sent when NBYTES data are transferred. + * This bit has no effect in slave mode or when RELOAD bit is set. + * @rmtoll CR2 AUTOEND LL_I2C_EnableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAutoEndMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Disable automatic STOP condition generation (master mode). + * @note Software end mode : TC flag is set when NBYTES data are transferre, stretching SCL low. + * @rmtoll CR2 AUTOEND LL_I2C_DisableAutoEndMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAutoEndMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_AUTOEND); +} + +/** + * @brief Check if automatic STOP condition is enabled or disabled. + * @rmtoll CR2 AUTOEND LL_I2C_IsEnabledAutoEndMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAutoEndMode(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_AUTOEND) == (I2C_CR2_AUTOEND)) ? 1UL : 0UL); +} + +/** + * @brief Enable reload mode (master mode). + * @note The transfer is not completed after the NBYTES data transfer, NBYTES will be reloaded when TCR flag is set. + * @rmtoll CR2 RELOAD LL_I2C_EnableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableReloadMode(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Disable reload mode (master mode). + * @note The transfer is completed after the NBYTES data transfer(STOP or RESTART will follow). + * @rmtoll CR2 RELOAD LL_I2C_DisableReloadMode + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableReloadMode(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_RELOAD); +} + +/** + * @brief Check if reload mode is enabled or disabled. + * @rmtoll CR2 RELOAD LL_I2C_IsEnabledReloadMode + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledReloadMode(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_RELOAD) == (I2C_CR2_RELOAD)) ? 1UL : 0UL); +} + +/** + * @brief Configure the number of bytes for transfer. + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 NBYTES LL_I2C_SetTransferSize + * @param I2Cx I2C Instance. + * @param TransferSize This parameter must be a value between Min_Data=0x00 and Max_Data=0xFF. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferSize(I2C_TypeDef *I2Cx, uint32_t TransferSize) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NBYTES, TransferSize << I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Get the number of bytes configured for transfer. + * @rmtoll CR2 NBYTES LL_I2C_GetTransferSize + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferSize(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_NBYTES) >> I2C_CR2_NBYTES_Pos); +} + +/** + * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code + or next received byte. + * @note Usage in Slave mode only. + * @rmtoll CR2 NACK LL_I2C_AcknowledgeNextData + * @param I2Cx I2C Instance. + * @param TypeAcknowledge This parameter can be one of the following values: + * @arg @ref LL_I2C_ACK + * @arg @ref LL_I2C_NACK + * @retval None + */ +__STATIC_INLINE void LL_I2C_AcknowledgeNextData(I2C_TypeDef *I2Cx, uint32_t TypeAcknowledge) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_NACK, TypeAcknowledge); +} + +/** + * @brief Generate a START or RESTART condition + * @note The START bit can be set even if bus is BUSY or I2C is in slave mode. + * This action has no effect when RELOAD is set. + * @rmtoll CR2 START LL_I2C_GenerateStartCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStartCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_START); +} + +/** + * @brief Generate a STOP condition after the current byte transfer (master mode). + * @rmtoll CR2 STOP LL_I2C_GenerateStopCondition + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_STOP); +} + +/** + * @brief Enable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master sends the complete 10bit slave address read sequence : + * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address + in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_EnableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + CLEAR_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Disable automatic RESTART Read request condition for 10bit address header (master mode). + * @note The master only sends the first 7 bits of 10bit address in Read direction. + * @rmtoll CR2 HEAD10R LL_I2C_DisableAuto10BitRead + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_DisableAuto10BitRead(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_HEAD10R); +} + +/** + * @brief Check if automatic RESTART Read request condition for 10bit address header is enabled or disabled. + * @rmtoll CR2 HEAD10R LL_I2C_IsEnabledAuto10BitRead + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledAuto10BitRead(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_HEAD10R) != (I2C_CR2_HEAD10R)) ? 1UL : 0UL); +} + +/** + * @brief Configure the transfer direction (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 RD_WRN LL_I2C_SetTransferRequest + * @param I2Cx I2C Instance. + * @param TransferRequest This parameter can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetTransferRequest(I2C_TypeDef *I2Cx, uint32_t TransferRequest) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_RD_WRN, TransferRequest); +} + +/** + * @brief Get the transfer direction requested (master mode). + * @rmtoll CR2 RD_WRN LL_I2C_GetTransferRequest + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_REQUEST_WRITE + * @arg @ref LL_I2C_REQUEST_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferRequest(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_RD_WRN)); +} + +/** + * @brief Configure the slave address for transfer (master mode). + * @note Changing these bits when START bit is set is not allowed. + * @rmtoll CR2 SADD LL_I2C_SetSlaveAddr + * @param I2Cx I2C Instance. + * @param SlaveAddr This parameter must be a value between Min_Data=0x00 and Max_Data=0x3F. + * @retval None + */ +__STATIC_INLINE void LL_I2C_SetSlaveAddr(I2C_TypeDef *I2Cx, uint32_t SlaveAddr) +{ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD, SlaveAddr); +} + +/** + * @brief Get the slave address programmed for transfer. + * @rmtoll CR2 SADD LL_I2C_GetSlaveAddr + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x0 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetSlaveAddr(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->CR2, I2C_CR2_SADD)); +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @rmtoll CR2 SADD LL_I2C_HandleTransfer\n + * CR2 ADD10 LL_I2C_HandleTransfer\n + * CR2 RD_WRN LL_I2C_HandleTransfer\n + * CR2 START LL_I2C_HandleTransfer\n + * CR2 STOP LL_I2C_HandleTransfer\n + * CR2 RELOAD LL_I2C_HandleTransfer\n + * CR2 NBYTES LL_I2C_HandleTransfer\n + * CR2 AUTOEND LL_I2C_HandleTransfer\n + * CR2 HEAD10R LL_I2C_HandleTransfer + * @param I2Cx I2C Instance. + * @param SlaveAddr Specifies the slave address to be programmed. + * @param SlaveAddrSize This parameter can be one of the following values: + * @arg @ref LL_I2C_ADDRSLAVE_7BIT + * @arg @ref LL_I2C_ADDRSLAVE_10BIT + * @param TransferSize Specifies the number of bytes to be programmed. + * This parameter must be a value between Min_Data=0 and Max_Data=255. + * @param EndMode This parameter can be one of the following values: + * @arg @ref LL_I2C_MODE_RELOAD + * @arg @ref LL_I2C_MODE_AUTOEND + * @arg @ref LL_I2C_MODE_SOFTEND + * @arg @ref LL_I2C_MODE_SMBUS_RELOAD + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC + * @arg @ref LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC + * @arg @ref LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC + * @param Request This parameter can be one of the following values: + * @arg @ref LL_I2C_GENERATE_NOSTARTSTOP + * @arg @ref LL_I2C_GENERATE_STOP + * @arg @ref LL_I2C_GENERATE_START_READ + * @arg @ref LL_I2C_GENERATE_START_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_7BIT_WRITE + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_READ + * @arg @ref LL_I2C_GENERATE_RESTART_10BIT_WRITE + * @retval None + */ +__STATIC_INLINE void LL_I2C_HandleTransfer(I2C_TypeDef *I2Cx, uint32_t SlaveAddr, uint32_t SlaveAddrSize, + uint32_t TransferSize, uint32_t EndMode, uint32_t Request) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp = ((uint32_t)(((uint32_t)SlaveAddr & I2C_CR2_SADD) | \ + ((uint32_t)SlaveAddrSize & I2C_CR2_ADD10) | \ + (((uint32_t)TransferSize << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)EndMode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD | I2C_CR2_ADD10 | + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | + I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_RELOAD | + I2C_CR2_NBYTES | I2C_CR2_AUTOEND | I2C_CR2_HEAD10R, + tmp); +} + +/** + * @brief Indicate the value of transfer direction (slave mode). + * @note RESET: Write transfer, Slave enters in receiver mode. + * SET: Read transfer, Slave enters in transmitter mode. + * @rmtoll ISR DIR LL_I2C_GetTransferDirection + * @param I2Cx I2C Instance. + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2C_DIRECTION_WRITE + * @arg @ref LL_I2C_DIRECTION_READ + */ +__STATIC_INLINE uint32_t LL_I2C_GetTransferDirection(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_DIR)); +} + +/** + * @brief Return the slave matched address. + * @rmtoll ISR ADDCODE LL_I2C_GetAddressMatchCode + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0x3F + */ +__STATIC_INLINE uint32_t LL_I2C_GetAddressMatchCode(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->ISR, I2C_ISR_ADDCODE) >> I2C_ISR_ADDCODE_Pos << 1); +} + +/** + * @brief Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode). + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition + or an Address Matched is received. + * This bit has no effect when RELOAD bit is set. + * This bit has no effect in device mode when SBC bit is not set. + * @rmtoll CR2 PECBYTE LL_I2C_EnableSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval None + */ +__STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx) +{ + SET_BIT(I2Cx->CR2, I2C_CR2_PECBYTE); +} + +/** + * @brief Check if the SMBus Packet Error byte internal comparison is requested or not. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll CR2 PECBYTE LL_I2C_IsEnabledSMBusPECCompare + * @param I2Cx I2C Instance. + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(const I2C_TypeDef *I2Cx) +{ + return ((READ_BIT(I2Cx->CR2, I2C_CR2_PECBYTE) == (I2C_CR2_PECBYTE)) ? 1UL : 0UL); +} + +/** + * @brief Get the SMBus Packet Error byte calculated. + * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not + * SMBus feature is supported by the I2Cx Instance. + * @rmtoll PECR PEC LL_I2C_GetSMBusPEC + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(const I2C_TypeDef *I2Cx) +{ + return (uint32_t)(READ_BIT(I2Cx->PECR, I2C_PECR_PEC)); +} + +/** + * @brief Read Receive Data register. + * @rmtoll RXDR RXDATA LL_I2C_ReceiveData8 + * @param I2Cx I2C Instance. + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_I2C_ReceiveData8(const I2C_TypeDef *I2Cx) +{ + return (uint8_t)(READ_BIT(I2Cx->RXDR, I2C_RXDR_RXDATA)); +} + +/** + * @brief Write in Transmit Data Register . + * @rmtoll TXDR TXDATA LL_I2C_TransmitData8 + * @param I2Cx I2C Instance. + * @param Data Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2C_TransmitData8(I2C_TypeDef *I2Cx, uint8_t Data) +{ + WRITE_REG(I2Cx->TXDR, Data); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2C_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, const LL_I2C_InitTypeDef *I2C_InitStruct); +ErrorStatus LL_I2C_DeInit(const I2C_TypeDef *I2Cx); +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct); + + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_I2C_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_iwdg.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_iwdg.h new file mode 100644 index 0000000000..f71981a285 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_iwdg.h @@ -0,0 +1,338 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_iwdg.h + * @author MCD Application Team + * @brief Header file of IWDG LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_IWDG_H +#define STM32WL3x_LL_IWDG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(IWDG) + +/** @defgroup IWDG_LL IWDG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IWDG_LL_Private_Constants IWDG Private Constants + * @{ + */ +#define LL_IWDG_KEY_RELOAD 0x0000AAAAU /*!< IWDG Reload Counter Enable */ +#define LL_IWDG_KEY_ENABLE 0x0000CCCCU /*!< IWDG Peripheral Enable */ +#define LL_IWDG_KEY_WR_ACCESS_ENABLE 0x00005555U /*!< IWDG KR Write Access Enable */ +#define LL_IWDG_KEY_WR_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Constants IWDG Exported Constants + * @{ + */ + +/** @defgroup IWDG_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_IWDG_ReadReg function + * @{ + */ +#define LL_IWDG_SR_PVU IWDG_SR_PVU /*!< Watchdog prescaler value update */ +#define LL_IWDG_SR_RVU IWDG_SR_RVU /*!< Watchdog counter reload value update */ +#define LL_IWDG_SR_WVU IWDG_SR_WVU /*!< Watchdog counter window value update */ +/** + * @} + */ + +/** @defgroup IWDG_LL_EC_PRESCALER Prescaler Divider + * @{ + */ +#define LL_IWDG_PRESCALER_4 0x00000000U /*!< Divider by 4 */ +#define LL_IWDG_PRESCALER_8 (IWDG_PR_PR_0) /*!< Divider by 8 */ +#define LL_IWDG_PRESCALER_16 (IWDG_PR_PR_1) /*!< Divider by 16 */ +#define LL_IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< Divider by 32 */ +#define LL_IWDG_PRESCALER_64 (IWDG_PR_PR_2) /*!< Divider by 64 */ +#define LL_IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< Divider by 128 */ +#define LL_IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< Divider by 256 */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Macros IWDG Exported Macros + * @{ + */ + +/** @defgroup IWDG_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in IWDG register + * @param __INSTANCE__ IWDG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_IWDG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in IWDG register + * @param __INSTANCE__ IWDG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_IWDG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup IWDG_LL_Exported_Functions IWDG Exported Functions + * @{ + */ +/** @defgroup IWDG_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Start the Independent Watchdog + * @note Except if the hardware watchdog option is selected + * @rmtoll KR KEY LL_IWDG_Enable + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_Enable(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_ENABLE); +} + +/** + * @brief Reloads IWDG counter with value defined in the reload register + * @rmtoll KR KEY LL_IWDG_ReloadCounter + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_ReloadCounter(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_RELOAD); +} + +/** + * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers + * @rmtoll KR KEY LL_IWDG_EnableWriteAccess + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_EnableWriteAccess(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_ENABLE); +} + +/** + * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers + * @rmtoll KR KEY LL_IWDG_DisableWriteAccess + * @param IWDGx IWDG Instance + * @retval None + */ +__STATIC_INLINE void LL_IWDG_DisableWriteAccess(IWDG_TypeDef *IWDGx) +{ + WRITE_REG(IWDGx->KR, LL_IWDG_KEY_WR_ACCESS_DISABLE); +} + +/** + * @brief Select the prescaler of the IWDG + * @rmtoll PR PR LL_IWDG_SetPrescaler + * @param IWDGx IWDG Instance + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_IWDG_PRESCALER_4 + * @arg @ref LL_IWDG_PRESCALER_8 + * @arg @ref LL_IWDG_PRESCALER_16 + * @arg @ref LL_IWDG_PRESCALER_32 + * @arg @ref LL_IWDG_PRESCALER_64 + * @arg @ref LL_IWDG_PRESCALER_128 + * @arg @ref LL_IWDG_PRESCALER_256 + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetPrescaler(IWDG_TypeDef *IWDGx, uint32_t Prescaler) +{ + WRITE_REG(IWDGx->PR, IWDG_PR_PR & Prescaler); +} + +/** + * @brief Get the selected prescaler of the IWDG + * @rmtoll PR PR LL_IWDG_GetPrescaler + * @param IWDGx IWDG Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_IWDG_PRESCALER_4 + * @arg @ref LL_IWDG_PRESCALER_8 + * @arg @ref LL_IWDG_PRESCALER_16 + * @arg @ref LL_IWDG_PRESCALER_32 + * @arg @ref LL_IWDG_PRESCALER_64 + * @arg @ref LL_IWDG_PRESCALER_128 + * @arg @ref LL_IWDG_PRESCALER_256 + */ +__STATIC_INLINE uint32_t LL_IWDG_GetPrescaler(IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->PR)); +} + +/** + * @brief Specify the IWDG down-counter reload value + * @rmtoll RLR RL LL_IWDG_SetReloadCounter + * @param IWDGx IWDG Instance + * @param Counter Value between Min_Data=0 and Max_Data=0x0FFF + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetReloadCounter(IWDG_TypeDef *IWDGx, uint32_t Counter) +{ + WRITE_REG(IWDGx->RLR, IWDG_RLR_RL & Counter); +} + +/** + * @brief Get the specified IWDG down-counter reload value + * @rmtoll RLR RL LL_IWDG_GetReloadCounter + * @param IWDGx IWDG Instance + * @retval Value between Min_Data=0 and Max_Data=0x0FFF + */ +__STATIC_INLINE uint32_t LL_IWDG_GetReloadCounter(IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->RLR)); +} + +/** + * @brief Specify high limit of the window value to be compared to the down-counter. + * @rmtoll WINR WIN LL_IWDG_SetWindow + * @param IWDGx IWDG Instance + * @param Window Value between Min_Data=0 and Max_Data=0x0FFF + * @retval None + */ +__STATIC_INLINE void LL_IWDG_SetWindow(IWDG_TypeDef *IWDGx, uint32_t Window) +{ + WRITE_REG(IWDGx->WINR, IWDG_WINR_WIN & Window); +} + +/** + * @brief Get the high limit of the window value specified. + * @rmtoll WINR WIN LL_IWDG_GetWindow + * @param IWDGx IWDG Instance + * @retval Value between Min_Data=0 and Max_Data=0x0FFF + */ +__STATIC_INLINE uint32_t LL_IWDG_GetWindow(IWDG_TypeDef *IWDGx) +{ + return (READ_REG(IWDGx->WINR)); +} + +/** + * @} + */ + +/** @defgroup IWDG_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if flag Prescaler Value Update is set or not + * @rmtoll SR PVU LL_IWDG_IsActiveFlag_PVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_PVU(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU) == (IWDG_SR_PVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if flag Reload Value Update is set or not + * @rmtoll SR RVU LL_IWDG_IsActiveFlag_RVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_RVU(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_RVU) == (IWDG_SR_RVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if flag Window Value Update is set or not + * @rmtoll SR WVU LL_IWDG_IsActiveFlag_WVU + * @param IWDGx IWDG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsActiveFlag_WVU(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_WVU) == (IWDG_SR_WVU)) ? 1UL : 0UL); +} + +/** + * @brief Check if all flags Prescaler, Reload & Window Value Update are reset or not + * @rmtoll SR PVU LL_IWDG_IsReady\n + * SR RVU LL_IWDG_IsReady\n + * SR WVU LL_IWDG_IsReady + * @param IWDGx IWDG Instance + * @retval State of bits (1 or 0). + */ +__STATIC_INLINE uint32_t LL_IWDG_IsReady(IWDG_TypeDef *IWDGx) +{ + return ((READ_BIT(IWDGx->SR, IWDG_SR_PVU | IWDG_SR_RVU | IWDG_SR_WVU) == 0U) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* IWDG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_IWDG_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_lcsc.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_lcsc.h new file mode 100644 index 0000000000..5ea914684b --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_lcsc.h @@ -0,0 +1,895 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_lcsc.h + * @author MCD Application Team + * @brief Header file of LCSC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_LCSC_H +#define STM32WL3x_LL_LCSC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (LCSC) + +/** @defgroup LCSC_LL LCSC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ + +/** @defgroup LCSC_LL_Exported_Constants LCSC Exported Constants + * @{ + */ + +/** @defgroup LCSC_LL_CLKWISE_STATE LCSC Clockwise state values + * @{ + */ +#define LL_LCSC_SR_CLKWISE_FSM_Q1 (0U) +#define LL_LCSC_SR_CLKWISE_FSM_Q2 (LCSC_SR_CLKWISE_STATE_0) +#define LL_LCSC_SR_CLKWISE_FSM_Q3 (LCSC_SR_CLKWISE_STATE_1) +#define LL_LCSC_SR_CLKWISE_FSM_Q4 (LCSC_SR_CLKWISE_STATE_1 | LCSC_SR_CLKWISE_STATE_0) +/** + * @} + */ + +/** @defgroup LCSC_LL_ACLKWISE_STATE LCSC Anti clockwise state values + * @{ + */ +#define LL_LCSC_SR_ACLKWISE_FSM_Q1 (0U) +#define LL_LCSC_SR_ACLKWISE_FSM_Q2 (LCSC_SR_ACLKWISE_STATE_0) +#define LL_LCSC_SR_ACLKWISE_FSM_Q3 (LCSC_SR_ACLKWISE_STATE_1) +#define LL_LCSC_SR_ACLKWISE_FSM_Q4 (LCSC_SR_ACLKWISE_STATE_1 | LCSC_SR_ACLKWISE_STATE_0) +/** + * @} + */ + +/** @defgroup LCSC_LL_LAST_DIR LCSC Last direction detected values + * @{ + */ +#define LL_LCSC_SR_LAST_DIR_UNKNOWN (0U) +#define LL_LCSC_SR_LAST_DIR_CLOCKWISE (LCSC_SR_LAST_DIR_1) +#define LL_LCSC_SR_LAST_DIR_COUNTER_CLOCKWISE (LCSC_SR_LAST_DIR_1 | LCSC_SR_LAST_DIR_0) +/** + * @} + */ + + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup LCSC_LL_Exported_Macros LCSC Exported Macros + * @{ + */ + + +/** @defgroup LCSC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Set the measurement duration (also called TMeas) is the duration of an LC measurement sequence. + * @note This period is given in number of slow clock cycles. + * @rmtoll CR0 TMEAS LL_LCSC_SetMeasurementTime + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 16383 (form 0x0 to 0x3fff) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetMeasurementTime(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->CR0, LCSC_CR0_TMEAS, value); +} + +/** + * @brief Get the measurement duration (also called TMeas) is the duration of an LC measurement sequence + * (including LCA, LCB and LCT if necessary, and also the time left before the next power-up of analog blocks + * (DAC, COMP, VCMBUFF)). + * @note This period is given in number of slow clock cycles. + * @rmtoll CR0 TMEAS LL_LCSC_GetMeasurementTime + * @param LCSCx LCSC Instance + * @retval the measurement duration TMeas + */ +__STATIC_INLINE uint32_t LL_LCSC_GetMeasurementTime(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->CR0, LCSC_CR0_TMEAS)); +} + +/** + * @brief Set the capture duration time. + * @note Also called Tcapture, it is the duration of one LC measurement, starting from the excitation pulse + * on the LC line and ending once the TCAP number of slow clock cycles has been reached. This duration + * is given in number of slow clock cycles. + * @rmtoll CR0 TCAP LL_LCSC_SetCaptureTime + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 63 (form 0x0 to 0x3f) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetCaptureTime(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->CR0, LCSC_CR0_TCAP, value << LCSC_CR0_TCAP_Pos); +} + +/** + * @brief Get the capture duration (also called Tcapture). + * @note It is the duration of one LC measurement, starting from the excitation pulse on the LC line and ending + * once the TCAP number of slow clock cycles has been reached. + * This duration is given in number of slow clock cycles. + * @rmtoll CR0 TCAP LL_LCSC_GetCaptureTime + * @param LCSCx LCSC Instance + * @retval the capture duration Tcapture + */ +__STATIC_INLINE uint32_t LL_LCSC_GetCaptureTime(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->CR0, LCSC_CR0_TCAP) >> LCSC_CR0_TCAP_Pos); +} + +/** + * @brief Set the inter-capture duration (also called TinterCapture). + * @note It is the duration between the end of a first TCAP and the following TCAP and is equal + * to TICAP + 2 slow clock cycles. + * This duration is given in number of slow clock cycles. + * @rmtoll CR0 TICAP LL_LCSC_SetInterCaptureTime + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 7 (form 0x0 to 0x7) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetInterCaptureTime(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->CR0, LCSC_CR0_TICAP, value << LCSC_CR0_TICAP_Pos); +} + +/** + * @brief Get the inter-capture duration (also called TinterCapture). + * @note It is the duration between the end of a firstTCAP and the following TCAP + * and is equal to TICAP + 2 slow clock cycles. This duration is given in number of slow clock cycles. + * @rmtoll CR0 TICAP LL_LCSC_GetInterCaptureTime + * @param LCSCx LCSC Instance + * @retval the inter-capture duration TinterCapture + */ +__STATIC_INLINE uint32_t LL_LCSC_GetInterCaptureTime(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->CR0, LCSC_CR0_TICAP) >> LCSC_CR0_TICAP_Pos); +} + +/** + * @brief Set the count threshold used to define if the LCA and LCB is near of not of a metallic surface. + * @rmtoll CR1 LCAB_DAMP_THRES LL_LCSC_SetDampingThreshold_LCAB + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 255 (form 0x0 to 0xff) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetDampingThreshold_LCAB(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->CR1, LCSC_CR1_LCAB_DAMP_THRES, value << LCSC_CR1_LCAB_DAMP_THRES_Pos); +} + +/** + * @brief Get the count threshold used to define if the LCA and LCB is near of not of a metallic surface. + * @rmtoll CR1 LCAB_DAMP_THRES LL_LCSC_GetDampingThreshold_LCAB + * @param LCSCx LCSC Instance + * @retval the damping threshold for LCA and LCB + */ +__STATIC_INLINE uint32_t LL_LCSC_GetDampingThreshold_LCAB(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->CR1, LCSC_CR1_LCAB_DAMP_THRES) >> LCSC_CR1_LCAB_DAMP_THRES_Pos); +} + +/** + * @brief Set the duration of TrecoveryVCM (in number of slow clock cycles) + * between the enable of the VCMBUFF and the establishment of the Voltage to the value VDD33/2. + * @note This time is to be considered between each sequence of LC measurement, called TSCAN in the registers. + * (sequence of LC measurement = LCA, LCB and sometimes LCT). TREC_VCM must not be set to values lower of 0x02 + * @rmtoll CR1 TREC_VCM LL_LCSC_Set_VCMBuff_RecoveryTime + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 511 (form 0x0 to 0x1ff) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_Set_VCMBuff_RecoveryTime(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->CR1, LCSC_CR1_TREC_VCM, value << LCSC_CR1_TREC_VCM_Pos); +} + +/** + * @brief Get the duration of TrecoveryVCM (in number of slow clock cycles) + * between the enable of the VCMBUFF and the establishment of the Voltage to the value VDD33/2. + * @note This time is to be considered between each sequence of LC measurement, called TSCAN in the registers. + * (sequence of LC measurement = LCA, LCB and sometimes LCT). TREC_VCM must not be set to values lower of 0x02 + * @rmtoll CR1 TREC_VCM LL_LCSC_Get_VCMBuff_RecoveryTime + * @param LCSCx LCSC Instance + * @retval the VCMBUFF Recovery Time + */ +__STATIC_INLINE uint32_t LL_LCSC_Get_VCMBuff_RecoveryTime(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->CR1, LCSC_CR1_TREC_VCM) >> LCSC_CR1_TREC_VCM_Pos); +} + +/** + * @brief Set the duration of TStartVCM (in number of slow clock cycles) + * between the enable of the VCMBUFF and the establishment of the Voltage to the value VDD33/2. + * @note This time is only to be considered for the first LC measurement after an enabling of the LCSC feature + * thanks to the LCSC_EN bit. TSART_VCM must not be set to values lower of 0x02 + * @rmtoll CR1 TSTART_VCM LL_LCSC_Set_VCMBuff_StartingTime + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 2047 (form 0x0 to 0x7ff) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_Set_VCMBuff_StartingTime(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->CR1, LCSC_CR1_TSTART_VCM, value << LCSC_CR1_TSTART_VCM_Pos); +} + +/** + * @brief Get the duration of TStartVCM (in number of slow clock cycles) + * between the enable of the VCMBUFF and the establishment of the Voltage to the value VDD33/2. + * @note This time is only to be considered for the first LC measurement after an enabling of the LCSC + * feature thanks to the LCSC_EN bit. TSART_VCM must not be set to values lower of 0x02 + * @rmtoll CR1 TSTART_VCM LL_LCSC_Get_VCMBuff_StartingTime + * @param LCSCx LCSC Instance + * @retval the VCMBUFF Starting Time + */ +__STATIC_INLINE uint32_t LL_LCSC_Get_VCMBuff_StartingTime(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->CR1, LCSC_CR1_TSTART_VCM) >> LCSC_CR1_TSTART_VCM_Pos); +} + +/** + * @brief Set the tamper detection prescaler comparing to the measurement period + * @note 0x0: the tamper detection and the LCT measurement are never done + * others: the LCT measurement is done once every TAMP_PSC sequences of measurements. + * @rmtoll CR2 TAMP_PSC LL_LCSC_SetMeasurementInterval_LCT + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 255 (form 0x0 to 0xff) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetMeasurementInterval_LCT(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->CR2, LCSC_CR2_TAMP_PSC, value << LCSC_CR2_TAMP_PSC_Pos); +} + +/** + * @brief Get the tamper detection prescaler comparing to the measurement period + * @note 0x00: the tamper detection and the LCT measurement are never done + * others: the LCT measurement is done once every TAMP_PSC sequences of measurements. + * @rmtoll CR2 TAMP_PSC LL_LCSC_GetMeasurementInterval_LCT + * @param LCSCx LCSC Instance + * @retval the tamper detection prescaler + */ +__STATIC_INLINE uint32_t LL_LCSC_GetMeasurementInterval_LCT(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->CR2, LCSC_CR2_TAMP_PSC) >> LCSC_CR2_TAMP_PSC_Pos); +} + +/** + * @brief Set the count threshold used to define if the LCT is near of not of a metallic surface. + * @rmtoll CR2 LCT_DAMP_THRES LL_LCSC_SetDampingThreshold_LCT + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 255 (form 0x0 to 0xff) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetDampingThreshold_LCT(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->CR2, LCSC_CR2_LCT_DAMP_THRES, value << LCSC_CR2_LCT_DAMP_THRES_Pos); +} + +/** + * @brief Get the count threshold used to define if the LCT is near of not of a metallic surface. + * @rmtoll CR2 LCT_DAMP_THRES LL_LCSC_GetDampingThreshold_LCT + * @param LCSCx LCSC Instance + * @retval the damping threshold for LCT + */ +__STATIC_INLINE uint32_t LL_LCSC_GetDampingThreshold_LCT(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->CR2, LCSC_CR2_LCT_DAMP_THRES) >> LCSC_CR2_LCT_DAMP_THRES_Pos); +} + +/** + * @brief Set the Pulse width programming for generated pulse. + * @rmtoll PULSE_CR LCAB_PULSE_WIDTH LL_LCSC_SetLowPulseWidth_LCAB + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 15 (form 0x0 to 0xf) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetLowPulseWidth_LCAB(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->PULSE_CR, LCSC_PULSE_CR_LCAB_PULSE_WIDTH, value << LCSC_PULSE_CR_LCAB_PULSE_WIDTH_Pos); +} + +/** + * @brief Get the Pulse width programming for generated pulse. + * @rmtoll PULSE_CR LCAB_PULSE_WIDTH LL_LCSC_GetLowPulseWidth_LCAB + * @param LCSCx LCSC Instance + * @retval the low pulse width for LCA and LCB + */ +__STATIC_INLINE uint32_t LL_LCSC_GetLowPulseWidth_LCAB(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->PULSE_CR, LCSC_PULSE_CR_LCAB_PULSE_WIDTH) >> LCSC_PULSE_CR_LCAB_PULSE_WIDTH_Pos); +} + +/** + * @brief Set the Pulse width programming for generated pulse. + * @rmtoll PULSE_CR LCT_PULSE_WIDTH LL_LCSC_SetLowPulseWidth_LCT + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 15 (form 0x0 to 0xf) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetLowPulseWidth_LCT(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->PULSE_CR, LCSC_PULSE_CR_LCT_PULSE_WIDTH, value << LCSC_PULSE_CR_LCT_PULSE_WIDTH_Pos); +} + +/** + * @brief Get the Pulse width programming for generated pulse. + * @rmtoll PULSE_CR LCT_PULSE_WIDTH LL_LCSC_GetLowPulseWidth_LCT + * @param LCSCx LCSC Instance + * @retval the low pulse width for LCT + */ +__STATIC_INLINE uint32_t LL_LCSC_GetLowPulseWidth_LCT(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->PULSE_CR, LCSC_PULSE_CR_LCT_PULSE_WIDTH) >> LCSC_PULSE_CR_LCT_PULSE_WIDTH_Pos); +} + +/** + * @brief LCSC Enable the IRQ and Wakeup event generation once the CLKWISE has reached the CLKWISE_THRES value. + * @rmtoll ENR CLKWISE_IE LL_LCSC_EnableClockWiseInterruptAndWakeup + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_EnableIT_ClockWise(LCSC_TypeDef *LCSCx) +{ + SET_BIT(LCSCx->ENR, LCSC_ENR_CLKWISE_IE); +} + +/** + * @brief LCSC Disable the IRQ and Wakeup event generation once + * the CLKWISE has reached the CLKWISE_THRES value. + * @rmtoll ENR CLKWISE_IE LL_LCSC_DisableIT_ClockWise + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_DisableIT_ClockWise(LCSC_TypeDef *LCSCx) +{ + CLEAR_BIT(LCSCx->ENR, LCSC_ENR_CLKWISE_IE); +} + +/** + * @brief Indicate if the clock wise interrupt (CLKWISE) is enabled. + * Enable the IRQ and Wakeup event generation once the CLKWISE has reached the CLKWISE_THRES value. + * @rmtoll ENR CLKWISE_IE LL_LCSC_IsEnabledIT_ClockWise + * @param LCSCx LCSC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LCSC_IsEnabledIT_ClockWise(LCSC_TypeDef *LCSCx) +{ + return ((READ_BIT(LCSCx->ENR, LCSC_ENR_CLKWISE_IE) == (LCSC_ENR_CLKWISE_IE)) ? 1U : 0U); +} + +/** + * @brief LCSC Enable the IRQ and Wakeup event generation once + * the anti clock wise value is equal or greater than the ACLKWISE_THRES bits. + * @rmtoll ENR ACLKWISE_IE LL_LCSC_EnableIT_AntiClockWise + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_EnableIT_AntiClockWise(LCSC_TypeDef *LCSCx) +{ + SET_BIT(LCSCx->ENR, LCSC_ENR_ACLKWISE_IE); +} + +/** + * @brief LCSC Disable the IRQ and Wakeup event generation once + * the anti clock wise value is equal or greater than the ACLKWISE_THRES bits. + * @rmtoll ENR ACLKWISE_IE LL_LCSC_DisableIT_AntiClockWise + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_DisableIT_AntiClockWise(LCSC_TypeDef *LCSCx) +{ + CLEAR_BIT(LCSCx->ENR, LCSC_ENR_ACLKWISE_IE); +} + +/** + * @brief Indicate if the anti clock wise interrupt (ACLKWISE) is enabled. + * @rmtoll ENR ACLKWISE_IE LL_LCSC_IsEnabledIT_AntiClockWise + * @param LCSCx LCSC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LCSC_IsEnabledIT_AntiClockWise(LCSC_TypeDef *LCSCx) +{ + return ((READ_BIT(LCSCx->ENR, LCSC_ENR_ACLKWISE_IE) == (LCSC_ENR_ACLKWISE_IE)) ? 1U : 0U); +} + +/** + * @brief LCSC Enable the IRQ and the Wakeup event generation on a tamper detection. + * @rmtoll ENR TAMP_IE LL_LCSC_EnableIT_LCT + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_EnableIT_LCT(LCSC_TypeDef *LCSCx) +{ + SET_BIT(LCSCx->ENR, LCSC_ENR_TAMP_IE); +} + +/** + * @brief LCSC Disable the IRQ and the Wakeup event generation on a tamper detection. + * @rmtoll ENR TAMP_IE LL_LCSC_DisableIT_LCT + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_DisableIT_LCT(LCSC_TypeDef *LCSCx) +{ + CLEAR_BIT(LCSCx->ENR, LCSC_ENR_TAMP_IE); +} + +/** + * @brief Indicate if the tamper interrupt (TAMP_IE) is enabled. + * @rmtoll ENR TAMP_IE LL_LCSC_IsEnabledIT_LCT + * @param LCSCx LCSC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LCSC_IsEnabledIT_LCT(LCSC_TypeDef *LCSCx) +{ + return ((READ_BIT(LCSCx->ENR, LCSC_ENR_TAMP_IE) == (LCSC_ENR_TAMP_IE)) ? 1U : 0U); +} + +/** + * @brief LCSC Enable the IRQ and the Wakeup event generation on a LCAB count out of bounds + * @rmtoll ENR CNT_OFB_WKP_IE LL_LCSC_EnableIT_CounterOutOfBoundWakeup + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_EnableIT_CounterOutOfBoundWakeup(LCSC_TypeDef *LCSCx) +{ + SET_BIT(LCSCx->ENR, LCSC_ENR_CNT_OFB_WKP_IE); +} + +/** + * @brief LCSC Disable the IRQ and the Wakeup event generation on a LCAB count out of bounds + * @rmtoll ENR CNT_OFB_WKP_IE LL_LCSC_DisableIT_CounterOutOfBoundWakeup + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_DisableIT_CounterOutOfBoundWakeup(LCSC_TypeDef *LCSCx) +{ + CLEAR_BIT(LCSCx->ENR, LCSC_ENR_CNT_OFB_WKP_IE); +} + +/** + * @brief Indicate if the LCAB count out of bounds interrupt (CNT_OFB_WKP_IE) is enabled. + * @rmtoll ENR CNT_OFB_WKP_IE LL_LCSC_IsEnabledIT_CounterOutOfBoundWakeup + * @param LCSCx LCSC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LCSC_IsEnabledIT_CounterOutOfBoundWakeup(LCSC_TypeDef *LCSCx) +{ + return ((READ_BIT(LCSCx->ENR, LCSC_ENR_CNT_OFB_WKP_IE) == (LCSC_ENR_CNT_OFB_WKP_IE)) ? 1U : 0U); +} + +/** + * @brief LCSC Enable (start) or Disable (stop) the LCSC Measurement. + * @rmtoll ENR LCSC_EN LL_LCSC_Enable + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_Enable(LCSC_TypeDef *LCSCx) +{ + SET_BIT(LCSCx->ENR, LCSC_ENR_LCSC_EN); +} + +/** + * @brief LCSC Disable (start) or Disable (stop) the LCSC Measurement. + * @rmtoll ENR LCSC_EN LL_LCSC_Disable + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_Disable(LCSC_TypeDef *LCSCx) +{ + CLEAR_BIT(LCSCx->ENR, LCSC_ENR_LCSC_EN); +} + +/** + * @brief Indicate if LCSC_EN is enabled. Enable (start) or Disable (stop) the LCSC Measurement. + * @rmtoll ENR LCSC_EN LL_LCSC_IsEnabled + * @param LCSCx LCSC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LCSC_IsEnabled(LCSC_TypeDef *LCSCx) +{ + return ((READ_BIT(LCSCx->ENR, LCSC_ENR_LCSC_EN) == (LCSC_ENR_LCSC_EN)) ? 1U : 0U); +} + +/** + * @brief Get the Number of Clock Wise revolutions + * @rmtoll WHEEL_SR CLKWISE LL_LCSC_GetClockWise + * @param LCSCx LCSC Instance + * @retval the Number of Clock Wise revolutions + */ +__STATIC_INLINE uint32_t LL_LCSC_GetClockWise(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->WHEEL_SR, LCSC_WHEEL_SR_CLKWISE) >> LCSC_WHEEL_SR_CLKWISE_Pos); +} + +/** + * @brief Get the Number of Anti Clock Wise revolutions + * @rmtoll WHEEL_SR ACLKWISE LL_LCSC_GetAntiClockWise + * @param LCSCx LCSC Instance + * @retval the Number of Anti Clock Wise revolutions + */ +__STATIC_INLINE uint32_t LL_LCSC_GetAntiClockWise(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->WHEEL_SR, LCSC_WHEEL_SR_ACLKWISE) >> LCSC_WHEEL_SR_ACLKWISE_Pos); +} + +/** + * @brief Set the Number of Clock Wise revolutions target + * @rmtoll CONFR CLKWISE_THRES LL_LCSC_SetClockWiseTarget + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 65535 (form 0x0 to 0xffff) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetClockWiseTarget(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->CONFR, LCSC_CONFR_CLKWISE_THRES, value << LCSC_CONFR_CLKWISE_THRES_Pos); +} + +/** + * @brief Get the Number of Clock Wise revolutions target + * @rmtoll CONFR CLKWISE_THRES LL_LCSC_GetClockWiseTarget + * @param LCSCx LCSC Instance + * @retval the Number of Clock Wise revolutions target + */ +__STATIC_INLINE uint32_t LL_LCSC_GetClockWiseTarget(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->CONFR, LCSC_CONFR_CLKWISE_THRES) >> LCSC_CONFR_CLKWISE_THRES_Pos); +} + +/** + * @brief Set the Number of Anti Clock Wise revolutions target + * @rmtoll CONFR ACLKWISE_THRES LL_LCSC_SetAntiClockWiseTarget + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 65535 (form 0x0 to 0xffff) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetAntiClockWiseTarget(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->CONFR, LCSC_CONFR_ACLKWISE_THRES, value << LCSC_CONFR_ACLKWISE_THRES_Pos); +} + +/** + * @brief Get the Number of Anti Clock Wise revolutions target + * @rmtoll CONFR ACLKWISE_THRES LL_LCSC_GetAntiClockWiseTarget + * @param LCSCx LCSC Instance + * @retval the Number of Anti Clock Wise revolutions target + */ +__STATIC_INLINE uint32_t LL_LCSC_GetAntiClockWiseTarget(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->CONFR, LCSC_CONFR_ACLKWISE_THRES) >> LCSC_CONFR_ACLKWISE_THRES_Pos); +} + +/** + * @brief Get the LCA Comparator last damping count + * @rmtoll COMP_CTN CMP_LCA_CNT LL_LCSC_GetComparatorLastDampingCount_LCA + * @param LCSCx LCSC Instance + * @retval the LCA Comparator last damping count + */ +__STATIC_INLINE uint32_t LL_LCSC_GetComparatorLastDampingCount_LCA(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->COMP_CTN, LCSC_COMP_CTN_CMP_LCA_CNT) >> LCSC_COMP_CTN_CMP_LCA_CNT_Pos); +} + +/** + * @brief Get the LCB Comparator last damping count + * @rmtoll COMP_CTN CMP_LCB_CNT LL_LCSC_GetComparatorLastDampingCount_LCB + * @param LCSCx LCSC Instance + * @retval the LCB Comparator last damping count + */ +__STATIC_INLINE uint32_t LL_LCSC_GetComparatorLastDampingCount_LCB(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->COMP_CTN, LCSC_COMP_CTN_CMP_LCB_CNT) >> LCSC_COMP_CTN_CMP_LCB_CNT_Pos); +} + +/** + * @brief Get the LCT Comparator last damping count + * @rmtoll COMP_CTN CMP_LCT_CNT LL_LCSC_GetComparatorLastDampingCount_LCT + * @param LCSCx LCSC Instance + * @retval the LCT Comparator last damping count + */ +__STATIC_INLINE uint32_t LL_LCSC_GetComparatorLastDampingCount_LCT(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->COMP_CTN, LCSC_COMP_CTN_CMP_LCT_CNT) >> LCSC_COMP_CTN_CMP_LCT_CNT_Pos); +} + +/** + * @brief Get the current state of the LCSC clockwise FSM + * @rmtoll SR CLKWISE_STATE LL_LCSC_GetClockWise_State + * @param LCSCx LCSC Instance + * @retval can be one of the following values + * @arg LL_LCSC_SR_CLKWISE_FSM_Q1 + * @arg LL_LCSC_SR_CLKWISE_FSM_Q2 + * @arg LL_LCSC_SR_CLKWISE_FSM_Q3 + * @arg LL_LCSC_SR_CLKWISE_FSM_Q4 + */ +__STATIC_INLINE uint32_t LL_LCSC_GetClockWise_State(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->SR, LCSC_SR_CLKWISE_STATE)); +} + +/** + * @brief Get the current state of the LCSC anti clockwise FSM + * @rmtoll SR ACLKWISE_STATE LL_LCSC_GetAntiClockWise_State + * @param LCSCx LCSC Instance + * @retval can be one of the following values + * @arg LL_LCSC_SR_ACLKWISE_FSM_Q1 + * @arg LL_LCSC_SR_ACLKWISE_FSM_Q2 + * @arg LL_LCSC_SR_ACLKWISE_FSM_Q3 + * @arg LL_LCSC_SR_ACLKWISE_FSM_Q4 + */ +__STATIC_INLINE uint32_t LL_LCSC_GetAntiClockWise_State(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->SR, LCSC_SR_ACLKWISE_STATE) >> LCSC_SR_ACLKWISE_STATE_Pos); +} + +/** + * @brief Get the last direction detected + * @rmtoll SR LAST_DIR LL_LCSC_GetLastDirection + * @param LCSCx LCSC Instance + * @retval can be one of the following values + * @arg LL_LCSC_SR_LAST_DIR_UNKNOWN + * @arg LL_LCSC_SR_LAST_DIR_CLOCKWISE + * @arg LL_LCSC_SR_LAST_DIR_COUNTER_CLOCKWISE + */ +__STATIC_INLINE uint32_t LL_LCSC_GetLastDirection(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->SR, LCSC_SR_LAST_DIR) >> LCSC_SR_LAST_DIR_Pos); +} + +/** + * @brief Get the Minimum of CMP_LCA_CNT, CMP_LCB_CNT reached during the measurement + * @rmtoll STAT MIN_LCAB_CNT LL_LCSC_GetMin_Counter + * @param LCSCx LCSC Instance + * @retval the Minimum of CMP_LCA_CNT + */ +__STATIC_INLINE uint32_t LL_LCSC_GetMin_Counter(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->STAT, LCSC_STAT_MIN_LCAB_CNT) >> LCSC_STAT_MIN_LCAB_CNT_Pos); +} + +/** + * @brief Get the Maximum of CMP_LCA_CNT, CMP_LCB_CNT reached during the measurement + * @rmtoll STAT MAX_LCAB_CNT LL_LCSC_GetMax_Counter + * @param LCSCx LCSC Instance + * @retval the Maximum of CMP_LCA_CNT + */ +__STATIC_INLINE uint32_t LL_LCSC_GetMax_Counter(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->STAT, LCSC_STAT_MAX_LCAB_CNT) >> LCSC_STAT_MAX_LCAB_CNT_Pos); +} + +/** + * @brief Set the Minimum bound of CMP_LCA_COUNT, CMP_LCB_COUNT used when monitoring the MIN_LCAB_CNT + * @rmtoll STAT MIN_LCAB_CNT_BOUND LL_LCSC_SetMin_CounterOutOfBound + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 255 (form 0x0 to 0xff) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetMin_CounterOutOfBound(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->STAT, LCSC_STAT_MIN_LCAB_CNT_BOUND, value << LCSC_STAT_MIN_LCAB_CNT_BOUND_Pos); +} + +/** + * @brief Get the Minimum bound of CMP_LCA_COUNT, CMP_LCB_COUNT used when monitoring the MIN_LCAB_CNT + * @rmtoll STAT MIN_LCAB_CNT_BOUND LL_LCSC_GetMin_CounterOutOfBound + * @param LCSCx LCSC Instance + * @retval the Minimum bound of CMP_LCA_COUNT + */ +__STATIC_INLINE uint32_t LL_LCSC_GetMin_CounterOutOfBound(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->STAT, LCSC_STAT_MIN_LCAB_CNT_BOUND) >> LCSC_STAT_MIN_LCAB_CNT_BOUND_Pos); +} + +/** + * @brief Set the Maximum bound of CMP_LCA_COUNT, CMP_LCB_COUNT used when monitoring the MAX_LCAB_CNT + * @rmtoll STAT MAX_LCAB_CNT_BOUND LL_LCSC_SetMax_CounterOutOfBound + * @param LCSCx LCSC Instance + * @param value parameter must be a number between 0 and 255 (form 0x0 to 0xff) + * @retval None + */ +__STATIC_INLINE void LL_LCSC_SetMax_CounterOutOfBound(LCSC_TypeDef *LCSCx, uint32_t value) +{ + MODIFY_REG(LCSCx->STAT, LCSC_STAT_MAX_LCAB_CNT_BOUND, value << LCSC_STAT_MAX_LCAB_CNT_BOUND_Pos); +} + +/** + * @brief Get the Maximum bound of CMP_LCA_COUNT, CMP_LCB_COUNT used when monitoring the MAX_LCAB_CNT + * @rmtoll STAT MAX_LCAB_CNT_BOUND LL_LCSC_GetMax_CounterOutOfBound + * @param LCSCx LCSC Instance + * @retval the Maximum bound of CMP_LCA_COUNT + */ +__STATIC_INLINE uint32_t LL_LCSC_GetMax_CounterOutOfBound(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->STAT, LCSC_STAT_MAX_LCAB_CNT_BOUND) >> LCSC_STAT_MAX_LCAB_CNT_BOUND_Pos); +} + +/** + * @brief Get the Revision of the RFIP + * @note to be used for metal fixes + * @rmtoll VER REV LL_LCSC_GetRevision + * @param LCSCx LCSC Instance + * @retval the Revision of the RFIP + */ +__STATIC_INLINE uint32_t LL_LCSC_GetRevision(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->VER, LCSC_VER_REV) >> LCSC_VER_REV_Pos); +} + +/** + * @brief Get the Version of the RFIP + * @note to be used for cut upgrades + * @rmtoll VER VER LL_LCSC_GetVersion + * @param LCSCx LCSC Instance + * @retval the Version of the RFIP + */ +__STATIC_INLINE uint32_t LL_LCSC_GetVersion(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->VER, LCSC_VER_VER) >> LCSC_VER_VER_Pos); +} + +/** + * @brief Get the Used for major upgrades + * @rmtoll VER PROD LL_LCSC_GetProduct + * @param LCSCx LCSC Instance + * @retval the Used for major upgrades + */ +__STATIC_INLINE uint32_t LL_LCSC_GetProduct(LCSC_TypeDef *LCSCx) +{ + return (uint32_t)(READ_BIT(LCSCx->VER, LCSC_VER_PROD) >> LCSC_VER_PROD_Pos); +} + +/** + * @brief Indicate if CLKWISE_F is enabled. Clock Wise Flag + * @note 0: counter CLKWISE has not reached CLKWISE_THRES + * 1: counter CLKWISE has reached CLKWISE_THRES + * @rmtoll ISR CLKWISE_F LL_LCSC_IsActiveFlag_CLKWISE + * @param LCSCx LCSC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LCSC_IsActiveFlag_CLKWISE(LCSC_TypeDef *LCSCx) +{ + return ((READ_BIT(LCSCx->ISR, LCSC_ISR_CLKWISE_F) == (LCSC_ISR_CLKWISE_F)) ? 1U : 0U); +} + +/** + * @brief Clear LCSC. Clock Wise Flag + * @rmtoll ISR CLKWISE_F LL_LCSC_ClearFlag_CLKWISE + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_ClearFlag_CLKWISE(LCSC_TypeDef *LCSCx) +{ + SET_BIT(LCSCx->ISR, LCSC_ISR_CLKWISE_F); +} + +/** + * @brief Indicate if ACLKWISE_F is enabled. Anti Clock Wise Flag + * @note 0: counter ACLKWISE has not reached ACLKWISE_THRES + * 1: counter CLKWISE has reached CLKWISE_THRES + * @rmtoll ISR ACLKWISE_F LL_LCSC_IsActiveFlag_ACLKWISE + * @param LCSCx LCSC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LCSC_IsActiveFlag_ACLKWISE(LCSC_TypeDef *LCSCx) +{ + return ((READ_BIT(LCSCx->ISR, LCSC_ISR_ACLKWISE_F) == (LCSC_ISR_ACLKWISE_F)) ? 1U : 0U); +} + +/** + * @brief Clear LCSC. Anti Clock Wise Flag + * @rmtoll ISR ACLKWISE_F LL_LCSC_ClearFlag_ACLKWISE + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_ClearFlag_ACLKWISE(LCSC_TypeDef *LCSCx) +{ + SET_BIT(LCSCx->ISR, LCSC_ISR_ACLKWISE_F); +} + +/** + * @brief Indicate if TAMP_F is enabled. Tamper Flag + * @note 0: tamper not detected + * 1: tamper detected + * @rmtoll ISR TAMP_F LL_LCSC_IsActiveFlag_TAMP + * @param LCSCx LCSC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LCSC_IsActiveFlag_TAMP(LCSC_TypeDef *LCSCx) +{ + return ((READ_BIT(LCSCx->ISR, LCSC_ISR_TAMP_F) == (LCSC_ISR_TAMP_F)) ? 1U : 0U); +} + +/** + * @brief Clear LCSC. Tamper Flag + * @rmtoll ISR TAMP_F LL_LCSC_ClearFlag_TAMP + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_ClearFlag_TAMP(LCSC_TypeDef *LCSCx) +{ + SET_BIT(LCSCx->ISR, LCSC_ISR_TAMP_F); +} + +/** + * @brief Indicate if CNT_OFB_F is enabled. Out of Bound Counter Flag + * @note 0: Out of Bound not detected + * 1: Out of Bound detected + * @rmtoll ISR CNT_OFB_F LL_LCSC_IsActiveFlag_CNT_OFB + * @param LCSCx LCSC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LCSC_IsActiveFlag_CNT_OFB(LCSC_TypeDef *LCSCx) +{ + return ((READ_BIT(LCSCx->ISR, LCSC_ISR_CNT_OFB_F) == (LCSC_ISR_CNT_OFB_F)) ? 1U : 0U); +} + +/** + * @brief Clear LCSC. Out of Bound Counter Flag + * @rmtoll ISR CNT_OFB_F LL_LCSC_ClearFlag_CNT_OFB + * @param LCSCx LCSC Instance + * @retval None + */ +__STATIC_INLINE void LL_LCSC_ClearFlag_CNT_OFB(LCSC_TypeDef *LCSCx) +{ + SET_BIT(LCSCx->ISR, LCSC_ISR_CNT_OFB_F); +} + + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LCSC */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_LCSC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_lpawur.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_lpawur.h new file mode 100644 index 0000000000..b8ee49e08a --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_lpawur.h @@ -0,0 +1,754 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_lpawur.h + * @author MCD Application Team + * @brief Header file of LPAWUR LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + + /* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_LPAWUR_H +#define STM32WL3x_LL_LPAWUR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include +#include "stm32wl3x_ll_utils.h" +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +/** @addtogroup LPAWUR + * @{ + */ + +/** @defgroup LPAWUR_Private_Constants LPAWUR Private Constants + * @{ + */ + +#define MINIMUM_LPAWUR_PAYLOAD_LEN 0x1 +#define MAXIMUM_LPAWUR_PAYLOAD_LEN 0x8 + +/** + * @} + */ + +/** @defgroup LPAWUR_Exported_Macros LPAWUR Exported Macros +* @{ + */ + +/** + * @brief Check if the payload length is within the valid range for LPAWUR. + * @param PAYLOAD_LEN Payload length to be checked. + * @retval True if the payload length is within the valid range, false otherwise. + */ +#define IS_LPAWUR_PAYLOAD_LENGTH(PAYLOAD_LEN) ((PAYLOAD_LEN)>=MINIMUM_LPAWUR_PAYLOAD_LEN && \ + (PAYLOAD_LEN)<=MAXIMUM_LPAWUR_PAYLOAD_LEN) + +/** + * @brief Check if the wakeup value is valid. + * @param WAKEUP Wakeup value to be checked. + * @retval True if the wakeup value is valid, false otherwise. + */ +#define IS_WAKEUP(WAKEUP) (((WAKEUP) == WAKEUP_BIT_SYNC) || \ + ((WAKEUP) == WAKEUP_FRAME_SYNC) || \ + ((WAKEUP) == WAKEUP_FRAME_COMPLETE) || \ + ((WAKEUP) == WAKEUP_FRAME_VALID) ) + +/** + * @brief Check if the EDICAL value is valid. + * @param EDICAL EDICAL value to be checked. + * @retval True if the EDICAL value is valid, false otherwise. + */ +#define IS_EDICAL(EDICAL) (((EDICAL) == ED_ICAL_VBAT_1_70_TO_2_00) || \ + ((EDICAL) == ED_ICAL_VBAT_2_00_TO_2_25) || \ + ((EDICAL) == ED_ICAL_VBAT_2_25_TO_2_50) || \ + ((EDICAL) == ED_ICAL_VBAT_2_50_TO_2_75) || \ + ((EDICAL) == ED_ICAL_VBAT_2_75_TO_3_00) || \ + ((EDICAL) == ED_ICAL_VBAT_3_00_TO_3_25) || \ + ((EDICAL) == ED_ICAL_VBAT_3_25_TO_3_50) || \ + ((EDICAL) == ED_ICAL_VBAT_3_50_TO_3_75) ) + +/** + * @brief Check if the AGC high level value is valid. + * @param AGC_LEVEL AGC high level value to be checked. + * @retval True if the AGC high level value is valid, false otherwise. + */ +#define IS_AGC_HIGH_LEVEL(AGC_LEVEL) (((AGC_LEVEL) == AGC_VBAT_0500) || \ + ((AGC_LEVEL) == AGC_VBAT_0575) || \ + ((AGC_LEVEL) == AGC_VBAT_0650) || \ + ((AGC_LEVEL) == AGC_VBAT_0725) || \ + ((AGC_LEVEL) == AGC_VBAT_0800) || \ + ((AGC_LEVEL) == AGC_VBAT_0875) || \ + ((AGC_LEVEL) == AGC_VBAT_0950) || \ + ((AGC_LEVEL) == AGC_VBAT_1025) || \ + ((AGC_LEVEL) == AGC_VBAT_1100) || \ + ((AGC_LEVEL) == AGC_VBAT_1175) || \ + ((AGC_LEVEL) == AGC_VBAT_1250) || \ + ((AGC_LEVEL) == AGC_VBAT_1325) || \ + ((AGC_LEVEL) == AGC_VBAT_1400) || \ + ((AGC_LEVEL) == AGC_VBAT_1475) || \ + ((AGC_LEVEL) == AGC_VBAT_1550) || \ + ((AGC_LEVEL) == AGC_VBAT_1625) ) + +/** + * @brief Check if the AGC low level value is valid. + * @param AGC_LEVEL AGC low level value to be checked. + * @retval True if the AGC low level value is valid, false otherwise. + */ +#define IS_AGC_LOW_LEVEL(AGC_LEVEL) (((AGC_LEVEL) == AGC_LOW_0) || \ + ((AGC_LEVEL) == AGC_LOW_1) || \ + ((AGC_LEVEL) == AGC_LOW_2) || \ + ((AGC_LEVEL) == AGC_LOW_3) ) + +/** + * @brief Check if the AGC hold mode value is valid. + * @param HOLD_MODE AGC hold mode value to be checked. + * @retval True if the AGC hold mode value is valid, false otherwise. + */ +#define IS_AGC_HOLD_MODE(HOLD_MODE) (((HOLD_MODE) == AGC_HOLD_AFTER_PREAMBLE) || \ + ((HOLD_MODE) == AGC_HOLD_AFTER_SYNC) ) + +/** + * @brief Check if the AGC mode value is valid. + * @param AGC_MODE AGC mode value to be checked. + * @retval True if the AGC mode value is valid, false otherwise. + */ +#define IS_AGC_MODE(AGC_MODE) (((AGC_MODE) == AGC_MODE_MAX) || \ + ((AGC_MODE) == AGC_MODE_OFF) || \ + ((AGC_MODE) == AGC_MODE_ON) || \ + ((AGC_MODE) == AGC_MODE_HOLD) ) + +/** + * @} + */ + +/** @defgroup LPAWUR_Exported_Types LPAWUR Exported Types + * @{ + */ +/** + * @brief STM32WL3 LPAWUR Wakeup enumeration + */ +typedef enum { + WAKEUP_BIT_SYNC = 0x00, /*!< the bit Sync has been detected */ + WAKEUP_FRAME_SYNC = 0x01, /*!< Frame sync detected */ + WAKEUP_FRAME_COMPLETE = 0x02, /*!< Frame_complete detected */ + WAKEUP_FRAME_VALID = 0x03 /*!< Frame_Valid detected (default value) */ +} WakeUpLevel; + +/** + * @brief STM32WL3 LPAWUR ERROR enumeration + */ +typedef enum { + ERROR_NO = 0x00, /*!< NO ERROR */ + ERROR_SYNC = 0x01, /*!< error in SYNC word */ + ERROR_FRAMING = 0x02, /*!< FRAMING error */ + ERROR_CRC = 0x03 /*!< CRC error */ +} LPAWUR_Error; + +/** + * @brief STM32WL3 LPAWUR ED_ICAL enumeration + */ +typedef enum { + ED_ICAL_VBAT_1_70_TO_2_00 = 0x00, /*!< VBAT=1.7 to 2.0V (default value) */ + ED_ICAL_VBAT_2_00_TO_2_25 = 0x01, /*!< VBAT=2.0 to 2.25V */ + ED_ICAL_VBAT_2_25_TO_2_50 = 0x02, /*!< VBAT=2.25 to 2.5V */ + ED_ICAL_VBAT_2_50_TO_2_75 = 0x03, /*!< VBAT=2.5 to 2.75V */ + ED_ICAL_VBAT_2_75_TO_3_00 = 0x04, /*!< VBAT=2.75 to 3.0V */ + ED_ICAL_VBAT_3_00_TO_3_25 = 0x05, /*!< VBAT=3.0 to 3.25V */ + ED_ICAL_VBAT_3_25_TO_3_50 = 0x06, /*!< VBAT=3.25 to 3.5V */ + ED_ICAL_VBAT_3_50_TO_3_75 = 0x07 /*!< VBAT=3.5 to 3.75V */ +} EdIcal; + +/** + * @brief STM32WL3 LPAWUR AGC_HIGH_LEVEL enumeration + */ +typedef enum { + AGC_VBAT_0500 = 0x00, /*!< AGC VBAT=0.5V */ + AGC_VBAT_0575 = 0x01, /*!< AGC VBAT=0.575V */ + AGC_VBAT_0650 = 0x02, /*!< AGC VBAT=0.650V */ + AGC_VBAT_0725 = 0x03, /*!< AGC VBAT=0.725V */ + AGC_VBAT_0800 = 0x04, /*!< AGC VBAT=0.8V (default value) */ + AGC_VBAT_0875 = 0x05, /*!< AGC VBAT=0.875V */ + AGC_VBAT_0950 = 0x06, /*!< AGC VBAT=0.950V */ + AGC_VBAT_1025 = 0x07, /*!< AGC VBAT=1.025V */ + AGC_VBAT_1100 = 0x08, /*!< AGC VBAT=1.1V */ + AGC_VBAT_1175 = 0x09, /*!< AGC VBAT=1.175V */ + AGC_VBAT_1250 = 0x0A, /*!< AGC VBAT=1.25V */ + AGC_VBAT_1325 = 0x0B, /*!< AGC VBAT=1.325V */ + AGC_VBAT_1400 = 0x0C, /*!< AGC VBAT=1.4V */ + AGC_VBAT_1475 = 0x0D, /*!< AGC VBAT=1.475V */ + AGC_VBAT_1550 = 0x0E, /*!< AGC VBAT=1.55V */ + AGC_VBAT_1625 = 0x0F, /*!< AGC VBAT=1.625V */ +} AgcHighLevel; + +/** + * @brief STM32WL3 LPAWUR AGC_LOW_LEVEL enumeration + */ +typedef enum { + AGC_LOW_0 = 0x00, /*!< AGC reference level = 0 V */ + AGC_LOW_1 = 0x01, /*!< AGC reference level = 100 mV */ + AGC_LOW_2 = 0x02, /*!< AGC reference level = 200 mV (default value) */ + AGC_LOW_3 = 0x03, /*!< AGC reference level = 300 mV */ +} AgcLowLevel; + +/** + * @brief STM32WL3 LPAWUR AGC Hold Mode enumeration + */ +typedef enum { + AGC_HOLD_AFTER_PREAMBLE = 0x00, /*!< AGC Hold after preamble detection (default) */ + AGC_HOLD_AFTER_SYNC = 0x01 /*!< AGC Hold after Sync detection */ +} AgcHoldType; + +/** + * @brief STM32WL3 LPAWUR AGC Hold Mode enumeration + */ +typedef enum { + AGC_MODE_MAX = 0x00, /*!< AGC Mode MAX (default) */ + AGC_MODE_OFF = 0x01, /*!< AGC Mode OFF */ + AGC_MODE_ON = 0x02, /*!< AGC Mode ON */ + AGC_MODE_HOLD = 0x03 /*!< AGC HOLD: the AGC is ON and its value is frozen during the LPAWUR frame detection */ +} AgcMode; + +typedef enum { + AGC_RESET_MODE_AFTER_FRAME = 0x00, /*!< reset the AGC after the complete frame detection */ + AGC_RESET_MODE_NEVER = 0x01 /*!< the AGC is never reset */ +} AgcResetMode; + +/** + * @brief STM32WL3 LPAWUR TREC LOOP Algorithm + */ +typedef enum +{ + DEFAULT = 0, /*!< The timing recovery loop algorithm is a second order loop with a defined leakage (0.98) */ + TWO_STEPS = !DEFAULT /*!< The timing recovery loop algorithm is with two steps. First order loop until preamble detected and second order loop after */ +} TrecLoopAlgo; + +/** @defgroup LPAWUR_Exported_Functions LPAWUR Exported Functions + * @{ + */ +/** +* @brief Read the error status of LPAWUR. +* @retval LPAWUR_Error value. +*/ +__STATIC_INLINE LPAWUR_Error LL_LPAWUR_ReadError(void) +{ + return (LPAWUR_Error)(READ_REG_FIELD(LPAWUR->STATUS,LPAWUR_STATUS_ERROR_F)); +} + +/** +* @brief Clear the error status of LPAWUR. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_ClearErrorStatus(void) +{ + MODIFY_REG_FIELD(LPAWUR->STATUS, LPAWUR_STATUS_ERROR_F, 0x01); +} + + +/** +* @brief Set the Slow Clock Cycle Bit Counter. +* @param ClkCyclePerBit The Slow Clock Cycle Bit Counter. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetSlowClkCyclePerBitCnt(uint8_t ClkCyclePerBit) +{ + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG0, LPAWUR_FRAME_CONFIG0_SLOW_CLK_CYCLE_PER_BIT_CNT, ClkCyclePerBit); +} + + +/** +* @brief Get the Slow Clock Cycle Bit Counter. +* @retval ClkCyclePerBit. +*/ +__STATIC_INLINE uint8_t LL_LPAWUR_GetSlowClkCyclePerBitCnt(void) +{ + return (uint8_t)(READ_REG_FIELD(LPAWUR->FRAME_CONFIG0,LPAWUR_FRAME_CONFIG0_SLOW_CLK_CYCLE_PER_BIT_CNT)); +} + +/** +* @brief Set the Payload Length. +* @param length The Payload Length. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetPayloadLength(uint8_t length) +{ + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG0, LPAWUR_FRAME_CONFIG0_PAYLOAD_LENGTH,length); +} + +/** +* @brief Get the payload length. +* @retval Length. +*/ +__STATIC_INLINE uint8_t LL_LPAWUR_GetPayloadLength(void) +{ + return (uint8_t)(READ_REG_FIELD(LPAWUR->FRAME_CONFIG0, LPAWUR_FRAME_CONFIG0_PAYLOAD_LENGTH)); +} + +/** +* @brief Set SYNC threshold counter. +* @param SyncThrCnt The SYNC threshold counter. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetSyncThrCnt(uint8_t SyncThrCnt) +{ + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG0,LPAWUR_FRAME_CONFIG0_SYNC_THRESHOLD_COUNT,SyncThrCnt); +} + +/** +* @brief Get the SYNC threshold counter. +* @retval Sync threshold counter. +*/ +__STATIC_INLINE uint8_t LL_LPAWUR_GetSyncThrCnt(void) +{ + return (uint8_t)(READ_REG_FIELD(LPAWUR->FRAME_CONFIG0, LPAWUR_FRAME_CONFIG0_SYNC_THRESHOLD_COUNT)); +} + +/** +* @brief Set the LPAWUR SYNC length. +* @param SyncLen The LPAWUR SYNC length. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetSyncLength(uint8_t SyncLen) +{ + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG0, LPAWUR_FRAME_CONFIG0_SYNC_LENGTH, SyncLen); +} + +/** +* @brief Get the LPAWUR SYNC length. +* @retval SyncLen. +*/ +__STATIC_INLINE uint8_t LL_LPAWUR_GetSyncLength(void) +{ + return (uint8_t)(READ_REG_FIELD(LPAWUR->FRAME_CONFIG0,LPAWUR_FRAME_CONFIG0_SYNC_LENGTH)); +} + +/** +* @brief Set the Preamble threshold counter. +* @param cnt counter value. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetPreambleThrCnt(uint8_t cnt) +{ + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG0,LPAWUR_FRAME_CONFIG0_PREAMBLE_THRESHOLD_COUNT,cnt); +} + +/** +* @brief Get the Preamble threshold counter. +* @retval Counter value. +*/ +__STATIC_INLINE uint8_t LL_LPAWUR_GetPreambleThrCnt(void) +{ + return (uint8_t)(READ_REG_FIELD(LPAWUR->FRAME_CONFIG0,LPAWUR_FRAME_CONFIG0_PREAMBLE_THRESHOLD_COUNT)); +} + +/** +* @brief Set the Timing recovery loop algorithm selection. +* @param algoSel the algorithm selection. +* This value is type of @ref TrecLoopAlgo. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetTRecAlgorithm(TrecLoopAlgo algoSel) +{ + if(algoSel == DEFAULT) + { + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_TREC_LOOP_ALGO_SEL, 0x0); + } + else + { + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_TREC_LOOP_ALGO_SEL, 0x1); + } +} + +/** +* @brief Get the Timing recovery loop algorithm selection. +* @retval algorithm selection. +* This value is type of @ref TrecLoopAlgo. +*/ +__STATIC_INLINE TrecLoopAlgo LL_LPAWUR_GetTRecAlgorithm(void) +{ + if(READ_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_TREC_LOOP_ALGO_SEL)) + return TWO_STEPS; + else + return DEFAULT; +} + +/** +* @brief Set the preamble enable. +* @param state enable or disable the preamble. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetPreambleEnable(FunctionalState state) +{ + if(state == ENABLE) + { + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_PREAMBLE_ENABLE,0x1); + } + else + { + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_PREAMBLE_ENABLE,0x0); + } +} + +/** +* @brief Get the preamble enable state. +* @retval Preamble enable state. +*/ +__STATIC_INLINE FunctionalState LL_LPAWUR_GetPreambleEnable(void) +{ + if(READ_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_PREAMBLE_ENABLE)) + return ENABLE; + else + return DISABLE; +} + +/** +* @brief Set Frame Sync counter timeout. +* @param timeout the Frame Sync counter timeout. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetFrameSyncCntTimeout(uint8_t timeout) +{ + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_FRAME_SYNC_COUNTER_TIMEOUT,timeout); +} + +/** +* @brief Get the Frame Sync counter timeout value. +* @retval Counter timeout. +*/ +__STATIC_INLINE uint8_t LL_LPAWUR_GetFrameSyncCntTimeout(void) +{ + return (uint8_t)(READ_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_FRAME_SYNC_COUNTER_TIMEOUT)); +} + +/** +* @brief Set the Kp parameter for clock recovery. +* @param v_kp The Kp parameter for clock recovery. +* @retval None +*/ +__STATIC_INLINE void LL_LPAWUR_SetKp(uint8_t v_kp) +{ + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_KP,v_kp); +} + +/** +* @brief Get the Kp parameter. +* @retval Kp. +*/ +__STATIC_INLINE uint8_t LL_LPAWUR_GetKp(void) +{ + return (uint8_t)(READ_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_KP)); +} + +/** +* @brief Set the Ki parameter for clock recovery. +* @param v_ki The Ki parameter for clock recovery. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetKi(uint8_t v_ki) +{ + MODIFY_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_KI,v_ki); +} + +/** +* @brief Get the Ki parameter. +* @retval Ki. +*/ +__STATIC_INLINE uint8_t LL_LPAWUR_GetKi(void) +{ + return (uint8_t)(READ_REG_FIELD(LPAWUR->FRAME_CONFIG1,LPAWUR_FRAME_CONFIG1_KI)); +} + +/** +* @brief Get the High SYNC pattern. +* @retval 16bits HIGH SYNC pattern (manchester encoded). +*/ +__STATIC_INLINE uint16_t LL_LPAWUR_GetSyncPatternHigh(void) +{ + uint16_t SyncHigh = READ_REG_FIELD(LPAWUR->FRAME_SYNC_CONFIG,LPAWUR_FRAME_SYNC_CONFIG_FRAME_SYNC_PATTERN_H); + return SyncHigh; +} + +/** +* @brief Get the Low SYNC pattern. +* @retval 16bits LOW SYNC pattern (manchester encoded). +*/ +__STATIC_INLINE uint16_t LL_LPAWUR_GetSyncPatternLow(void) +{ + uint16_t SyncLow = READ_REG_FIELD(LPAWUR->FRAME_SYNC_CONFIG,LPAWUR_FRAME_SYNC_CONFIG_FRAME_SYNC_PATTERN_L); + return SyncLow; +} + +/** +* @brief Set the LPAWUR Wake Up level. +* @param xWakeUpLvl The LPAWUR Wake Up level. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetWakeUpLevel(WakeUpLevel xWakeUpLvl) +{ + MODIFY_REG_FIELD(LPAWUR->RFIP_CONFIG,LPAWUR_RFIP_CONFIG_WAKEUP_LEVEL,xWakeUpLvl); +} + +/** +* @brief Get the LPAWUR Wake Up level. +* @retval WakeUpLevel. +*/ +__STATIC_INLINE WakeUpLevel LL_LPAWUR_GetWakeUpLevel(void) +{ + return (WakeUpLevel)READ_REG_FIELD(LPAWUR->RFIP_CONFIG,LPAWUR_RFIP_CONFIG_WAKEUP_LEVEL); +} + +/** +* @brief Enable or Disable the LPAWUR feature. +* @param state Enable or Disable the LPAWUR. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetState(FunctionalState state) +{ + if(state == ENABLE) + { + SET_BIT(LPAWUR->RFIP_CONFIG,LPAWUR_RFIP_CONFIG_LPAWUR_ENABLE); + } + else + { + CLEAR_BIT(LPAWUR->RFIP_CONFIG,LPAWUR_RFIP_CONFIG_LPAWUR_ENABLE); + } +} + +/** +* @brief Get the LPAWUR feature state. +* @retval state. +*/ +__STATIC_INLINE FunctionalState LL_LPAWUR_GetState(void) +{ + if(READ_REG_FIELD(LPAWUR->RFIP_CONFIG,LPAWUR_RFIP_CONFIG_LPAWUR_ENABLE)) + return ENABLE; + else + return DISABLE; +} + +/** +* @brief Set the Energy Detector calibration value. +* @param value calibration value. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetEdIcal(EdIcal value) +{ + MODIFY_REG_FIELD(LPAWUR->RF_CONFIG,LPAWUR_RF_CONFIG_ED_ICAL,value); +} + +/** +* @brief Get the ED calibration value. +* @retval calibration value. +*/ +__STATIC_INLINE EdIcal LL_LPAWUR_GetEdIcal(void) +{ + return (EdIcal)READ_REG_FIELD(LPAWUR->RF_CONFIG,LPAWUR_RF_CONFIG_ED_ICAL); +} + +/** +* @brief Set the AGC High Level value. +* @param value AGC High Level value. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetAGCHighLevel(AgcHighLevel value) +{ + MODIFY_REG_FIELD(LPAWUR->RF_CONFIG, LPAWUR_RF_CONFIG_AGC_HIGH_LVL, value); +} + +/** +* @brief Get the AGC High Level value. +* @retval AGC High Level value. +*/ +__STATIC_INLINE AgcHighLevel LL_LPAWUR_GetAGCHighLevel(void) +{ + return (AgcHighLevel)READ_REG_FIELD(LPAWUR->RF_CONFIG, LPAWUR_RF_CONFIG_AGC_HIGH_LVL); +} + +/** +* @brief Set the DC level shift enable. +* @param state enable state. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_EnableDCControl(FunctionalState state) +{ + if(state == ENABLE) + { + SET_BIT(LPAWUR->RF_CONFIG,LPAWUR_RF_CONFIG_ED_DC_CTRL); /* DC level shift (default value) */ + } + else + { + CLEAR_BIT(LPAWUR->RF_CONFIG,LPAWUR_RF_CONFIG_ED_DC_CTRL); /* No DC level shift */ + } +} + +/** +* @brief Set the AGC Low Level value. +* @param value AGC Low Level value. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetAGCLowLevel(AgcLowLevel value) +{ + MODIFY_REG_FIELD(LPAWUR->RF_CONFIG, LPAWUR_RF_CONFIG_AGC_LOW_LVL, value); +} + +/** +* @brief Get the AGC Low Level value. +* @retval AGC Low Level value. +*/ +__STATIC_INLINE AgcLowLevel LL_LPAWUR_GetAGCLowLevel(void) +{ + return (AgcLowLevel)READ_REG_FIELD(LPAWUR->RF_CONFIG, LPAWUR_RF_CONFIG_AGC_LOW_LVL); +} + +/** +* @brief Set the Clock divider +* @param div The Clock divider. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetClkDiv(uint8_t div) +{ + MODIFY_REG_FIELD(LPAWUR->RF_CONFIG,LPAWUR_RF_CONFIG_CLKDIV,div); +} + +/** +* @brief Get the clock divider value. +* @retval div. +*/ +__STATIC_INLINE uint8_t LL_LPAWUR_GetClkDiv(void) +{ + return (uint8_t)READ_REG_FIELD(LPAWUR->RF_CONFIG,LPAWUR_RF_CONFIG_CLKDIV); +} + +/** +* @brief Set the ED switch. +* @param state The ED switch state. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetEdSwitch(FunctionalState state) +{ + if(state == ENABLE) + { + SET_BIT(LPAWUR->RF_CONFIG,LPAWUR_RF_CONFIG_ED_SWITCH); + } + else + { + CLEAR_BIT(LPAWUR->RF_CONFIG,LPAWUR_RF_CONFIG_ED_SWITCH); + } +} + +/** +* @brief Get the ED switch feature state. +* @retval state. +*/ +__STATIC_INLINE FunctionalState LL_LPAWUR_GetEdSwitch(void) +{ + if(READ_REG_FIELD(LPAWUR->RF_CONFIG,LPAWUR_RF_CONFIG_ED_SWITCH)) + return ENABLE; + else + return DISABLE; +} + +/** +* @brief Set the AGC reset Mode. +* @param mode The AGC reset Mode. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetAgcResetMode(AgcResetMode mode) +{ + if(mode == AGC_RESET_MODE_NEVER) + { + SET_BIT(LPAWUR->AGC_CONFIG,LPAWUR_AGC_CONFIG_AGC_RESET_MODE); + } + else + { + CLEAR_BIT(LPAWUR->AGC_CONFIG,LPAWUR_AGC_CONFIG_AGC_RESET_MODE); + } +} + +/** +* @brief Get the AGC reset mode. +* @retval state. +*/ +__STATIC_INLINE AgcResetMode LL_LPAWUR_GetAgcResetMode(void) +{ + if(READ_REG_FIELD(LPAWUR->AGC_CONFIG,LPAWUR_AGC_CONFIG_AGC_RESET_MODE)) + return AGC_RESET_MODE_NEVER; + else + return AGC_RESET_MODE_AFTER_FRAME; +} + +/** +* @brief Set the AGC Hold mode. +* @param mode The AGC Hold mode. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetAgcHoldMode(AgcHoldType mode) +{ + MODIFY_REG_FIELD(LPAWUR->AGC_CONFIG,LPAWUR_AGC_CONFIG_AGC_HOLD_MODE,mode); +} + +/** +* @brief Get the AGC Hold mode. +* @retval hold mode. +*/ +__STATIC_INLINE AgcHoldType LL_LPAWUR_GetAgcHoldMode(void) +{ + return (AgcHoldType)READ_REG_FIELD(LPAWUR->AGC_CONFIG,LPAWUR_AGC_CONFIG_AGC_HOLD_MODE); +} + +/** +* @brief Set the AGC mode. +* @param mode The AGC mode. +* @retval None. +*/ +__STATIC_INLINE void LL_LPAWUR_SetAgcMode(AgcMode mode) +{ + MODIFY_REG_FIELD(LPAWUR->AGC_CONFIG,LPAWUR_AGC_CONFIG_AGC_MODE,mode); +} + +/** +* @brief Get the AGC mode. +* @retval mode. +*/ +__STATIC_INLINE AgcMode LL_LPAWUR_GetAgcMode(void) +{ + return (AgcMode)READ_REG_FIELD(LPAWUR->AGC_CONFIG,LPAWUR_AGC_CONFIG_AGC_MODE); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*STM32WL3x_LL_LPAWUR_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_lpuart.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_lpuart.h new file mode 100644 index 0000000000..30b1950151 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_lpuart.h @@ -0,0 +1,2661 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_lpuart.h + * @author MCD Application Team + * @brief Header file of LPUART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_LPUART_H +#define STM32WL3x_LL_LPUART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (LPUART1) + +/** @defgroup LPUART_LL LPUART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Variables LPUART Private Variables + * @{ + */ +/* Array used to get the LPUART prescaler division decimal values versus @ref LPUART_LL_EC_PRESCALER values */ +static const uint16_t LPUART_PRESCALER_TAB[] = +{ + (uint16_t)1, + (uint16_t)2, + (uint16_t)4, + (uint16_t)6, + (uint16_t)8, + (uint16_t)10, + (uint16_t)12, + (uint16_t)16, + (uint16_t)32, + (uint16_t)64, + (uint16_t)128, + (uint16_t)256, + (uint16_t)256, + (uint16_t)256, + (uint16_t)256, + (uint16_t)256 +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup LPUART_LL_Private_Constants LPUART Private Constants + * @{ + */ +/* Defines used in Baud Rate related macros and corresponding register setting computation */ +#define LPUART_LPUARTDIV_FREQ_MUL 256U +#define LPUART_BRR_MASK 0x000FFFFFU +#define LPUART_BRR_MIN_VALUE 0x00000300U +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_Private_Macros LPUART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_ES_INIT LPUART Exported Init structures + * @{ + */ + +/** + * @brief LL LPUART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref LPUART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected LPUART communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref LPUART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref LPUART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref LPUART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref LPUART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_LPUART_SetHWFlowCtrl().*/ + +} LL_LPUART_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Constants LPUART Exported Constants + * @{ + */ + +/** @defgroup LPUART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_LPUART_WriteReg function + * @{ + */ +#define LL_LPUART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_LPUART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_LPUART_ICR_NCF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_LPUART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_LPUART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_LPUART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#define LL_LPUART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_LPUART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_LPUART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_LPUART_ReadReg function + * @{ + */ +#define LL_LPUART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_LPUART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_LPUART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_LPUART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_LPUART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_LPUART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_LPUART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_LPUART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_LPUART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_LPUART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_LPUART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_LPUART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_LPUART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_LPUART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_LPUART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_LPUART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_LPUART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_LPUART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_LPUART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_LPUART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_LPUART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_LPUART_ReadReg and LL_LPUART_WriteReg functions + * @{ + */ +#define LL_LPUART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_LPUART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty + interrupt enable */ +#define LL_LPUART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_LPUART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO + not full interrupt enable */ +#define LL_LPUART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_LPUART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_LPUART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_LPUART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_LPUART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_LPUART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_LPUART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_LPUART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_LPUART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_LPUART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_LPUART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DIRECTION Direction + * @{ + */ +#define LL_LPUART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_LPUART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_LPUART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_LPUART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_LPUART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_LPUART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_LPUART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_LPUART_WAKEUP_IDLELINE 0x00000000U /*!< LPUART wake up from Mute mode on Idle Line */ +#define LL_LPUART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< LPUART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_LPUART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_LPUART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 |\ + USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 |\ + USART_PRESC_PRESCALER_1 |\ + USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_LPUART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_LPUART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_LPUART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_LPUART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_LPUART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_LPUART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_LPUART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_LPUART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received + in positive/direct logic. (1=H, 0=L) */ +#define LL_LPUART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received + in negative/inverse logic. (1=L, 0=H). + The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_LPUART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, + following the start bit */ +#define LL_LPUART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, + following the start bit */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_LPUART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_LPUART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_LPUART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_LPUART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested + when there is space in the receive buffer */ +#define LL_LPUART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted + when the nCTS input is asserted (tied to 0)*/ +#define LL_LPUART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_LPUART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_LPUART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_LPUART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_LPUART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_LPUART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup LPUART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_LPUART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_LPUART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Macros LPUART Exported Macros + * @{ + */ + +/** @defgroup LPUART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_LPUART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in LPUART register + * @param __INSTANCE__ LPUART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_LPUART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup LPUART_LL_EM_Exported_Macros_Helper Helper Macros + * @{ + */ + +/** + * @brief Compute LPUARTDIV value according to Peripheral Clock and + * expected Baud Rate (20-bit value of LPUARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for LPUART Instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud Rate value to achieve + * @retval LPUARTDIV value to be used for BRR register filling + */ +#define __LL_LPUART_DIV(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (uint32_t)\ + ((((((uint64_t)(__PERIPHCLK__)/(uint64_t)(LPUART_PRESCALER_TAB[(uint16_t)(__PRESCALER__)]))\ + * LPUART_LPUARTDIV_FREQ_MUL) + (uint32_t)((__BAUDRATE__)/2U))/(__BAUDRATE__)) & LPUART_BRR_MASK) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup LPUART_LL_Exported_Functions LPUART Exported Functions + * @{ + */ + +/** @defgroup LPUART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief LPUART Enable + * @rmtoll CR1 UE LL_LPUART_Enable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Enable(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief LPUART Disable + * @note When LPUART is disabled, LPUART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the LPUART is kept, but all the status + * flags, in the LPUARTx_ISR are set to their default values. + * @note In order to go into low-power mode without generating errors on the line, + * the TE bit must be reset before and the software must wait + * for the TC bit in the LPUART_ISR to be set before resetting the UE bit. + * The DMA requests are also reset when UE = 0 so the DMA channel must + * be disabled before resetting the UE bit. + * @rmtoll CR1 UE LL_LPUART_Disable + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_Disable(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if LPUART is enabled + * @rmtoll CR1 UE LL_LPUART_IsEnabled + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabled(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @rmtoll CR1 FIFOEN LL_LPUART_EnableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableFIFO(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @rmtoll CR1 FIFOEN LL_LPUART_DisableFIFO + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableFIFO(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @rmtoll CR1 FIFOEN LL_LPUART_IsEnabledFIFO + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledFIFO(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_SetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @rmtoll CR3 TXFTCFG LL_LPUART_GetTXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXFIFOThreshold(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @rmtoll CR3 RXFTCFG LL_LPUART_SetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @rmtoll CR3 RXFTCFG LL_LPUART_GetRXFIFOThreshold + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXFIFOThreshold(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @rmtoll CR3 TXFTCFG LL_LPUART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_LPUART_ConfigFIFOsThreshold + * @param LPUARTx LPUART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_LPUART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \ + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief LPUART enabled in STOP Mode + * @note When this function is enabled, LPUART is able to wake up the MCU from Stop mode, provided that + * LPUART clock selection is HSI or LSE in RCC. + * @rmtoll CR1 UESM LL_LPUART_EnableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief LPUART disabled in STOP Mode + * @note When this function is disabled, LPUART is not able to wake up the MCU from Stop mode + * @rmtoll CR1 UESM LL_LPUART_DisableInStopMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableInStopMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if LPUART is enabled in STOP Mode + * (able to wake up MCU from Stop mode or not) + * @rmtoll CR1 UESM LL_LPUART_IsEnabledInStopMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledInStopMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_LPUART_EnableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionRx(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_LPUART_DisableDirectionRx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionRx(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_LPUART_EnableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDirectionTx(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_LPUART_DisableDirectionTx + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDirectionTx(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_SetTransferDirection\n + * CR1 TE LL_LPUART_SetTransferDirection + * @param LPUARTx LPUART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferDirection(USART_TypeDef *LPUARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_LPUART_GetTransferDirection\n + * CR1 TE LL_LPUART_GetTransferDirection + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DIRECTION_NONE + * @arg @ref LL_LPUART_DIRECTION_RX + * @arg @ref LL_LPUART_DIRECTION_TX + * @arg @ref LL_LPUART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferDirection(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled) + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_LPUART_SetParity\n + * CR1 PCE LL_LPUART_SetParity + * @param LPUARTx LPUART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetParity(USART_TypeDef *LPUARTx, uint32_t Parity) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_LPUART_GetParity\n + * CR1 PCE LL_LPUART_GetParity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_LPUART_GetParity(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_LPUART_SetWakeUpMethod + * @param LPUARTx LPUART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWakeUpMethod(USART_TypeDef *LPUARTx, uint32_t Method) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_LPUART_GetWakeUpMethod + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_IDLELINE + * @arg @ref LL_LPUART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWakeUpMethod(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_SetDataWidth + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDataWidth(USART_TypeDef *LPUARTx, uint32_t DataWidth) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M LL_LPUART_GetDataWidth + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDataWidth(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_LPUART_EnableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableMuteMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_LPUART_DisableMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableMuteMode(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_LPUART_IsEnabledMuteMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledMuteMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_SetPrescaler + * @param LPUARTx LPUART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetPrescaler(USART_TypeDef *LPUARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(LPUARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @rmtoll PRESC PRESCALER LL_LPUART_GetPrescaler + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetPrescaler(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_SetStopBitsLength + * @param LPUARTx LPUART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetStopBitsLength(USART_TypeDef *LPUARTx, uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_LPUART_GetStopBitsLength + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetStopBitsLength(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_LPUART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_LPUART_SetParity() function + * - Stop bits configuration using @ref LL_LPUART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_LPUART_ConfigCharacter\n + * CR1 PCE LL_LPUART_ConfigCharacter\n + * CR1 M LL_LPUART_ConfigCharacter\n + * CR2 STOP LL_LPUART_ConfigCharacter + * @param LPUARTx LPUART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_LPUART_DATAWIDTH_7B + * @arg @ref LL_LPUART_DATAWIDTH_8B + * @arg @ref LL_LPUART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_LPUART_PARITY_NONE + * @arg @ref LL_LPUART_PARITY_EVEN + * @arg @ref LL_LPUART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_LPUART_STOPBITS_1 + * @arg @ref LL_LPUART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigCharacter(USART_TypeDef *LPUARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(LPUARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_LPUART_SetTXRXSwap + * @param LPUARTx LPUART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXRXSwap(USART_TypeDef *LPUARTx, uint32_t SwapConfig) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_LPUART_GetTXRXSwap + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXRX_STANDARD + * @arg @ref LL_LPUART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXRXSwap(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_LPUART_SetRXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetRXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_LPUART_GetRXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetRXPinLevel(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_LPUART_SetTXPinLevel + * @param LPUARTx LPUART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTXPinLevel(USART_TypeDef *LPUARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_LPUART_GetTXPinLevel + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_LPUART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTXPinLevel(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_LPUART_SetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBinaryDataLogic(USART_TypeDef *LPUARTx, uint32_t DataLogic) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_LPUART_GetBinaryDataLogic + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_LPUART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBinaryDataLogic(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_SetTransferBitOrder + * @param LPUARTx LPUART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetTransferBitOrder(USART_TypeDef *LPUARTx, uint32_t BitOrder) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_LPUART_GetTransferBitOrder + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_BITORDER_LSBFIRST + * @arg @ref LL_LPUART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_LPUART_GetTransferBitOrder(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Set Address of the LPUART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_LPUART_ConfigNodeAddress\n + * CR2 ADDM7 LL_LPUART_ConfigNodeAddress + * @param LPUARTx LPUART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the LPUART node. + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ConfigNodeAddress(USART_TypeDef *LPUARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(LPUARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the LPUART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_LPUART_GetNodeAddress + * @param LPUARTx LPUART Instance + * @retval Address of the LPUART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddress(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_LPUART_GetNodeAddressLen + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_ADDRESS_DETECT_4B + * @arg @ref LL_LPUART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_LPUART_GetNodeAddressLen(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_EnableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @rmtoll CR3 RTSE LL_LPUART_DisableRTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableRTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_EnableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @rmtoll CR3 CTSE LL_LPUART_DisableCTSHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableCTSHWFlowCtrl(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_SetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_SetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetHWFlowCtrl(USART_TypeDef *LPUARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @rmtoll CR3 RTSE LL_LPUART_GetHWFlowCtrl\n + * CR3 CTSE LL_LPUART_GetHWFlowCtrl + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_HWCONTROL_NONE + * @arg @ref LL_LPUART_HWCONTROL_RTS + * @arg @ref LL_LPUART_HWCONTROL_CTS + * @arg @ref LL_LPUART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_LPUART_GetHWFlowCtrl(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_EnableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableOverrunDetect(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_LPUART_DisableOverrunDetect + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableOverrunDetect(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_LPUART_IsEnabledOverrunDetect + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledOverrunDetect(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_SetWKUPType + * @param LPUARTx LPUART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetWKUPType(USART_TypeDef *LPUARTx, uint32_t Type) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @rmtoll CR3 WUS LL_LPUART_GetWKUPType + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_WAKEUP_ON_ADDRESS + * @arg @ref LL_LPUART_WAKEUP_ON_STARTBIT + * @arg @ref LL_LPUART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_LPUART_GetWKUPType(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure LPUART BRR register for achieving expected Baud Rate value. + * + * @note Compute and set LPUARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock and expected Baud Rate values + * @note Peripheral clock and Baud Rate values provided as function parameters should be valid + * (Baud rate value != 0). + * @note Provided that LPUARTx_BRR must be > = 0x300 and LPUART_BRR is 20-bit, + * a care should be taken when generating high baud rates using high PeriphClk + * values. PeriphClk must be in the range [3 x BaudRate, 4096 x BaudRate]. + * @rmtoll BRR BRR LL_LPUART_SetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetBaudRate(USART_TypeDef *LPUARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t BaudRate) +{ + if (BaudRate != 0U) + { + LPUARTx->BRR = __LL_LPUART_DIV(PeriphClk, PrescalerValue, BaudRate); + } +} + +/** + * @brief Return current Baud Rate value, according to LPUARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @rmtoll BRR BRR LL_LPUART_GetBaudRate + * @param LPUARTx LPUART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_LPUART_PRESCALER_DIV1 + * @arg @ref LL_LPUART_PRESCALER_DIV2 + * @arg @ref LL_LPUART_PRESCALER_DIV4 + * @arg @ref LL_LPUART_PRESCALER_DIV6 + * @arg @ref LL_LPUART_PRESCALER_DIV8 + * @arg @ref LL_LPUART_PRESCALER_DIV10 + * @arg @ref LL_LPUART_PRESCALER_DIV12 + * @arg @ref LL_LPUART_PRESCALER_DIV16 + * @arg @ref LL_LPUART_PRESCALER_DIV32 + * @arg @ref LL_LPUART_PRESCALER_DIV64 + * @arg @ref LL_LPUART_PRESCALER_DIV128 + * @arg @ref LL_LPUART_PRESCALER_DIV256 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_LPUART_GetBaudRate(const USART_TypeDef *LPUARTx, uint32_t PeriphClk, + uint32_t PrescalerValue) +{ + uint32_t lpuartdiv; + uint32_t brrresult; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (LPUART_PRESCALER_TAB[(uint16_t)PrescalerValue])); + + lpuartdiv = LPUARTx->BRR & LPUART_BRR_MASK; + + if (lpuartdiv >= LPUART_BRR_MIN_VALUE) + { + brrresult = (uint32_t)(((uint64_t)(periphclkpresc) * LPUART_LPUARTDIV_FREQ_MUL) / lpuartdiv); + } + else + { + brrresult = 0x0UL; + } + + return (brrresult); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_EnableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableHalfDuplex(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @rmtoll CR3 HDSEL LL_LPUART_DisableHalfDuplex + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableHalfDuplex(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @rmtoll CR3 HDSEL LL_LPUART_IsEnabledHalfDuplex + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledHalfDuplex(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEDT LL_LPUART_SetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEDeassertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @rmtoll CR1 DEDT LL_LPUART_GetDEDeassertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : c + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEDeassertionTime(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @rmtoll CR1 DEAT LL_LPUART_SetDEAssertionTime + * @param LPUARTx LPUART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDEAssertionTime(USART_TypeDef *LPUARTx, uint32_t Time) +{ + MODIFY_REG(LPUARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @rmtoll CR1 DEAT LL_LPUART_GetDEAssertionTime + * @param LPUARTx LPUART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Time Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDEAssertionTime(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_EnableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDEMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @rmtoll CR3 DEM LL_LPUART_DisableDEMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDEMode(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @rmtoll CR3 DEM LL_LPUART_IsEnabledDEMode + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDEMode(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_SetDESignalPolarity + * @param LPUARTx LPUART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_LPUART_SetDESignalPolarity(USART_TypeDef *LPUARTx, uint32_t Polarity) +{ + MODIFY_REG(LPUARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @rmtoll CR3 DEP LL_LPUART_GetDESignalPolarity + * @param LPUARTx LPUART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_LPUART_DE_POLARITY_HIGH + * @arg @ref LL_LPUART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_LPUART_GetDESignalPolarity(const USART_TypeDef *LPUARTx) +{ + return (uint32_t)(READ_BIT(LPUARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the LPUART Parity Error Flag is set or not + * @rmtoll ISR PE LL_LPUART_IsActiveFlag_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_PE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Framing Error Flag is set or not + * @rmtoll ISR FE LL_LPUART_IsActiveFlag_FE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_FE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_LPUART_IsActiveFlag_NE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_NE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_LPUART_IsActiveFlag_ORE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_ORE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_LPUART_IsActiveFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_IDLE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsActiveFlag_RXNE LL_LPUART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART Read Data Register or LPUART RX FIFO Not Empty Flag is set or not + * @rmtoll ISR RXNE_RXFNE LL_LPUART_IsActiveFlag_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXNE_RXFNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_LPUART_IsActiveFlag_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TC(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsActiveFlag_TXE LL_LPUART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART Transmit Data Register Empty or LPUART TX FIFO Not Full Flag is set or not + * @rmtoll ISR TXE_TXFNF LL_LPUART_IsActiveFlag_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXE_TXFNF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS interrupt Flag is set or not + * @rmtoll ISR CTSIF LL_LPUART_IsActiveFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_nCTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Flag is set or not + * @rmtoll ISR CTS LL_LPUART_IsActiveFlag_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Busy Flag is set or not + * @rmtoll ISR BUSY LL_LPUART_IsActiveFlag_BUSY + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_BUSY(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Flag is set or not + * @rmtoll ISR CMF LL_LPUART_IsActiveFlag_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_CM(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_LPUART_IsActiveFlag_SBK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_SBK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_LPUART_IsActiveFlag_RWU + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RWU(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from stop mode Flag is set or not + * @rmtoll ISR WUF LL_LPUART_IsActiveFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_WKUP(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_LPUART_IsActiveFlag_TEACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TEACK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_LPUART_IsActiveFlag_REACK + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_REACK(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Empty Flag is set or not + * @rmtoll ISR TXFE LL_LPUART_IsActiveFlag_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Flag is set or not + * @rmtoll ISR RXFF LL_LPUART_IsActiveFlag_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Threshold Flag is set or not + * @rmtoll ISR TXFT LL_LPUART_IsActiveFlag_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_TXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Threshold Flag is set or not + * @rmtoll ISR RXFT LL_LPUART_IsActiveFlag_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsActiveFlag_RXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_LPUART_ClearFlag_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_PE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_LPUART_ClearFlag_FE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_FE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise detected Flag + * @rmtoll ICR NECF LL_LPUART_ClearFlag_NE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_NE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_LPUART_ClearFlag_ORE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_ORE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_LPUART_ClearFlag_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_IDLE(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_LPUART_ClearFlag_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_TC(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @rmtoll ICR CTSCF LL_LPUART_ClearFlag_nCTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_nCTS(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_LPUART_ClearFlag_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_CM(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @rmtoll ICR WUCF LL_LPUART_ClearFlag_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_ClearFlag_WKUP(USART_TypeDef *LPUARTx) +{ + WRITE_REG(LPUARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_EnableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_IDLE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_LPUART_EnableIT_RXNE LL_LPUART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_EnableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_EnableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TC(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +#define LL_LPUART_EnableIT_TXE LL_LPUART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_EnableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_EnableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_PE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_EnableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CM(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_EnableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFE(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_EnableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFF(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_EnableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_ERROR(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_EnableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_CTS(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_EnableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_WKUP(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_EnableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_TXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_EnableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableIT_RXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_LPUART_DisableIT_IDLE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_IDLE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_LPUART_DisableIT_RXNE LL_LPUART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_DisableIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_LPUART_DisableIT_TC + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TC(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TCIE); +} + +#define LL_LPUART_DisableIT_TXE LL_LPUART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_DisableIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXE_TXFNF(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_LPUART_DisableIT_PE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_PE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_LPUART_DisableIT_CM + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CM(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @rmtoll CR1 TXFEIE LL_LPUART_DisableIT_TXFE + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFE(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_LPUART_DisableIT_RXFF + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFF(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register). + * - 0: Interrupt is inhibited + * - 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the LPUARTx_ISR register. + * @rmtoll CR3 EIE LL_LPUART_DisableIT_ERROR + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_ERROR(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @rmtoll CR3 CTSIE LL_LPUART_DisableIT_CTS + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_CTS(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @rmtoll CR3 WUFIE LL_LPUART_DisableIT_WKUP + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_WKUP(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @rmtoll CR3 TXFTIE LL_LPUART_DisableIT_TXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_TXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @rmtoll CR3 RXFTIE LL_LPUART_DisableIT_RXFT + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableIT_RXFT(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the LPUART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_LPUART_IsEnabledIT_IDLE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_IDLE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsEnabledIT_RXNE LL_LPUART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART RX Not Empty and LPUART RX FIFO Not Empty Interrupt is enabled or disabled. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_LPUART_IsEnabledIT_RXNE_RXFNE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXNE_RXFNE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_LPUART_IsEnabledIT_TC + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TC(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +#define LL_LPUART_IsEnabledIT_TXE LL_LPUART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the LPUART TX Empty and LPUART TX FIFO Not Full Interrupt is enabled or disabled + * @rmtoll CR1 TXEIE_TXFNFIE LL_LPUART_IsEnabledIT_TXE_TXFNF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXE_TXFNF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_LPUART_IsEnabledIT_PE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_PE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_LPUART_IsEnabledIT_CM + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CM(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART TX FIFO Empty Interrupt is enabled or disabled + * @rmtoll CR1 TXFEIE LL_LPUART_IsEnabledIT_TXFE + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFE(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART RX FIFO Full Interrupt is enabled or disabled + * @rmtoll CR1 RXFFIE LL_LPUART_IsEnabledIT_RXFF + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFF(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_LPUART_IsEnabledIT_ERROR + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_ERROR(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART CTS Interrupt is enabled or disabled. + * @rmtoll CR3 CTSIE LL_LPUART_IsEnabledIT_CTS + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_CTS(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the LPUART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @rmtoll CR3 WUFIE LL_LPUART_IsEnabledIT_WKUP + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_WKUP(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART TX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 TXFTIE LL_LPUART_IsEnabledIT_TXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_TXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if LPUART RX FIFO Threshold Interrupt is enabled or disabled + * @rmtoll CR3 RXFTIE LL_LPUART_IsEnabledIT_RXFT + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFT(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_EnableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_LPUART_DisableDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_RX(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_LPUART_IsEnabledDMAReq_RX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_RX(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_EnableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_LPUART_DisableDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMAReq_TX(USART_TypeDef *LPUARTx) +{ + ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_LPUART_IsEnabledDMAReq_TX + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_TX(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_EnableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_EnableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_LPUART_DisableDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_DisableDMADeactOnRxErr(USART_TypeDef *LPUARTx) +{ + CLEAR_BIT(LPUARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_LPUART_IsEnabledDMADeactOnRxErr + * @param LPUARTx LPUART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *LPUARTx) +{ + return ((READ_BIT(LPUARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the LPUART data register address used for DMA transfer + * @rmtoll RDR RDR LL_LPUART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_LPUART_DMA_GetRegAddr + * @param LPUARTx LPUART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_LPUART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_LPUART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_LPUART_DMA_GetRegAddr(const USART_TypeDef *LPUARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_LPUART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(LPUARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData8 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_LPUART_ReceiveData8(const USART_TypeDef *LPUARTx) +{ + return (uint8_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_LPUART_ReceiveData9 + * @param LPUARTx LPUART Instance + * @retval Time Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_LPUART_ReceiveData9(const USART_TypeDef *LPUARTx) +{ + return (uint16_t)(READ_BIT(LPUARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData8 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData8(USART_TypeDef *LPUARTx, uint8_t Value) +{ + LPUARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_LPUART_TransmitData9 + * @param LPUARTx LPUART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_LPUART_TransmitData9(USART_TypeDef *LPUARTx, uint16_t Value) +{ + LPUARTx->TDR = Value & 0x1FFUL; +} + +/** + * @} + */ + +/** @defgroup LPUART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_LPUART_RequestBreakSending + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestBreakSending(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put LPUART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_LPUART_RequestEnterMuteMode + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestEnterMuteMode(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_LPUART_RequestRxDataFlush + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestRxDataFlush(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @brief Request a Transmit data FIFO flush + * @note TXFRQ bit is set to flush the whole FIFO when FIFO mode is enabled. This + * also sets the flag TXFE (TXFIFO empty bit in the LPUART_ISR register). + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll RQR TXFRQ LL_LPUART_RequestTxDataFlush + * @param LPUARTx LPUART Instance + * @retval None + */ +__STATIC_INLINE void LL_LPUART_RequestTxDataFlush(USART_TypeDef *LPUARTx) +{ + SET_BIT(LPUARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup LPUART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_LPUART_DeInit(const USART_TypeDef *LPUARTx); +ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, const LL_LPUART_InitTypeDef *LPUART_InitStruct); +void LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPUART1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_LPUART_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_mrsubg.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_mrsubg.h new file mode 100644 index 0000000000..4a0974ff0e --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_mrsubg.h @@ -0,0 +1,1212 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_mrsubg.h + * @author GPM Application Team + * @brief Header file of MRSUBG LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + + /* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_MRSUBG_H +#define STM32WL3x_LL_MRSUBG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" +#include "stm32wl3x_ll_utils.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +/** @defgroup MRSUBG_LL MRSUBG + * @{ + */ + +/** @defgroup MRSUBG_LL_Private_Constants MRSUBG Private Constants + * @{ + */ +#if defined(IS_169MHZ) + /* WL33xA */ + #define HIGH_BAND_FACTOR 8 /*!< Band select factor for high band. Factor B in the equation of the user manual */ + #define LOW_BAND_FACTOR 20 /*!< Band select factor for middle band. Factor B in the equation of the user manual */ + + #define LOW_BAND_LOWER_LIMIT 159200000 /*!< Lower limit of the low band */ + #define LOW_BAND_UPPER_LIMIT 185600000 /*!< Upper limit of the low band */ + #define HIGH_BAND_LOWER_LIMIT 398000000 /*!< Lower limit of the high band */ + #define HIGH_BAND_UPPER_LIMIT 464000000 /*!< Upper limit of the high band */ +#else + /* WL33x */ + #define HIGH_BAND_FACTOR 4 /*!< Band select factor for high band. Factor B in the equation of the user manual */ + #define LOW_BAND_FACTOR 8 /*!< Band select factor for middle band. Factor B in the equation of the user manual */ + +#define LOW_BAND_LOWER_LIMIT 413000000 /*!< Lower limit of the low band */ +#define LOW_BAND_UPPER_LIMIT 479000000 /*!< Upper limit of the low band */ +#define HIGH_BAND_LOWER_LIMIT 826000000 /*!< Lower limit of the high band */ +#define HIGH_BAND_UPPER_LIMIT 958000000 /*!< Upper limit of the high band */ +#endif + +#define MINIMUM_DATARATE 100 /*!< Minimum datarate supported by STM32WL3 100 bps */ +#define MAXIMUM_DATARATE 300000 /*!< Maximum datarate supported by STM32WL3 300 ksps (600 kbps) */ + +#define SEQ_MASK_NEVER_MATCH MR_SUBG_GLOB_STATUS_RFSEQ_IRQ_STATUS_SEQ_F /* If we use SEQ_F as the only flag bit to match on, then a match can never occur because SEQ_F is only set when the sequencer terminates. */ +#define SEQ_MASK_ALWAYS_MATCH 0x00000000 /* The Sequencer automatically matches a null mask */ + +/** + * @} + */ + +/** @defgroup MRSUBG_LL_Exported_Macros MRSUBG Exported Macros +* @{ + */ + +#define IS_PREAMBLE_LEN(VAL) (VAL<=2046) +#define IS_POSTAMBLE_LEN(VAL) (VAL<=126) +#define IS_SYNC_LEN(VAL) (VAL<=32) +#define IS_FRAME_LEN(VAL) (VAL>=2) && (VAL<=2047) +#define IS_PREAMBLE_15_4G_LEN(VAL) (((VAL)>=4) && ((VAL)<=64)) + +#define IS_MODULATION_15_4G(MOD) (((MOD) == MOD_2FSK) || ((MOD) == MOD_4FSK)) + +#define IS_FCS_TYPE(TYPE) (((TYPE) == FCS_16BIT) || \ + ((TYPE) == FCS_32BIT)) + +#define IS_FEC_TYPE(TYPE) (((TYPE) == FEC_15_4_G_NONE) || \ + ((TYPE) == FEC_15_4_G_NRNSC) || \ + ((TYPE) == FEC_15_4_G_RSC) || \ + ((TYPE) == FEC_15_4_G_RSC_Interleaving)) + + +#define IS_WMBUS_SUBMODE(MODE) (((MODE) == WMBUS_SUBMODE_S1_S2_LONG_HEADER) || \ + ((MODE) == WMBUS_SUBMODE_NOT_CONFIGURED) || \ + ((MODE) == WMBUS_SUBMODE_S1_M_S2_T2_OTHER_TO_METER) || \ + ((MODE) == WMBUS_SUBMODE_T1_T2_METER_TO_OTHER) || \ + ((MODE) == WMBUS_SUBMODE_R2_SHORT_HEADER)) + +/** @brief Macro that checks if SELECTION is a MRSubG_WhiteningBeforeFECType */ +#define IS_WHITEFEC_SELECTION(SELECTION) (((SELECTION) == FEC_THEN_WHITENING) || ((SELECTION) == WHITENING_THEN_FEC)) + +#define PREAMBLE_BYTE(v) (4*v) +#define SYNC_BYTE(v) ((8*v)-1) +/** + * @} + */ + + +/** @defgroup MRSUBG_LL_Exported_Types MRSUBG Exported Types + * @{ + */ +/** +* @brief STM32WL3 MRSUBG PA modes +*/ +typedef enum{ + PA_LEGACY = 0x00, /* legacy mode */ + PA_FIR = 0x01, /* FIR active (to be used in ASK/OOK modulation only) */ + PA_DIRECT = 0x02 /* Direct mode */ +} MRSubG_PAMode; + +/** +* @brief STM32WL3 PA drive modes +*/ +typedef enum{ + PA_DRV_TX = 0x01, /* up to 10dBm */ + PA_DRV_TX_HP = 0x02, /* up to 14dBm */ + PA_DRV_TX_TX_HP = 0x03 /* up to 20dBm */ +} MRSubG_PA_DRVMode; + +/** + * @brief STM32WL3 Commands codes enumeration + */ +typedef enum +{ + CMD_NOP = ((uint8_t)(0x00)), /* No action. This 'no' command can be requested at any time, whatever the on-going command or in IDLE */ + CMD_TX = ((uint8_t)(0x01)), /* Start a TX sequence */ + CMD_RX = ((uint8_t)(0x02)), /* Start a RX sequence */ + CMD_LOCKRX = ((uint8_t)(0x03)), /* Start a RF sequence up to PLL locked based on RX frequency */ + CMD_LOCKTX = ((uint8_t)(0x04)), /* Start a RF sequence up to PLL locked based on TX frequency */ + CMD_SABORT = ((uint8_t)(0x05)), /* Stop any on-going RX/TX/LOCKRX/LOCKTX command */ + CMD_CALIB_SAFEASK = ((uint8_t)(0x0A)), /* Launch a PA Safe-ASK calibration to get the max safe PA code to be used */ + CMD_RELOAD_RX_TIMER = ((uint8_t)(0x06)), /* Reload with a new timeout and new stop conditions and restart the RX Timer */ + CMD_CALIB_AGC = ((uint8_t)(0x0B)) /* Start needed HW features to run an AGC_ATTEN trim sequence at SW level */ +} MRSubGCmd; + +/** + * @brief STM32WL3 MRSUBG FSM state enumaration + */ +typedef enum +{ + STATE_IDLE = 0x00, + STATE_ENA_RF_REG = 0x01, + STATE_WAIT_ACTIVE2 = 0x02, + STATE_ACTIVE2 = 0x03, + STATE_ENA_CURR = 0x04, + STATE_SYNTH_SETUP = 0x05, + STATE_CALIB_VCO = 0x06, + STATE_LOCKRXTX = 0x07, + STATE_LOCKONTX = 0x08, + STATE_EN_PA = 0x09, + STATE_TX = 0x0A, + STATE_PA_DWN_ANA = 0x0B, + STATE_END_TX = 0x0C, + STATE_LOCKONRX = 0x0D, + STATE_EN_RX = 0x0E, + STATE_EN_LNA = 0x0F, + STATE_RX = 0x10, + STATE_END_RX = 0x11, + STATE_SYNTH_PWDN = 0x12 +} MRSubGFSMState; + +/** +* @brief BT Values for GFSK +*/ +typedef enum { + BT_1 = 0, + BT_05 = 1 +} MRSubG_BTSelect; + +/** + * @brief STM32WL3 Transmission modes + */ +typedef enum { + ISI_EQ_DISABLED = 0x00, + ISI_EQ_SP = 0x01, + ISI_EQ_DP = 0x02 +} MRSubG_ISIEQMode; + +/** + * @brief STM32WL3 Transmission modes + */ +typedef enum{ + TX_NORMAL = 0x00, /* Only payload is provided through RAM buffers Rest of the frame built from configuration registers (PREAMBLE, SYNC, CRC...). */ + TX_DIRECT_BUFFERS = 0x01, /* Full bit stream (including PREAMBLE, SYNC, CRC...) to be provided through RAM buffers. */ + TX_DIRECT_GPIO = 0x02, /* Full bit stream (including PREAMBLE, SYNC, CRC...) to be provided serially through the TX DATA GPIO. */ + TX_PN = 0x03 /* Internal PN generator send a polynomial bit stream on the antenna. */ +} MRSubGTXMode; + +/** + * @brief STM32WL3 Reception modes + */ +typedef enum{ + RX_NORMAL = 0x00, /* Only payload is stored into the RAM buffers. CRC and packet length are readable in dedicated status registers */ + RX_DIRECT_BUFFERS = 0x01, /* Full bit stream is stored into the RAM buffers. */ + RX_DIRECT_GPIO = 0x02, /* Full bit stream is provided serially through the RX DATA GPIO */ + RX_IQ_SAMPLING = 0x03, /* Raw I/Q sampling taken at the output of the Channel filter inside the demodulator are stored in RAM. */ + RX_FREQDETEC_SAMPLING = 0x04, /* Raw data taken at the output of the frequency detector inside the demodulator (detection of the instantaneous frequency changes) are stored in RAM. */ + RX_SOFTBIT_SAMPLING = 0x05 /* Raw data taken at the output of the post-filter inside the demodulator (soft bits before the 0/1 detection) are stored in RAM. */ +} MRSubGRXMode; + +/** + * @brief STM32WL3 preamble pattern enumeration + */ +typedef enum +{ + PRE_SEQ_0101 = 0x00, /* Suitable for 2-(G)FSK and ASK/OOK */ + PRE_SEQ_1010 = 0x01, /* Suitable for 2-(G)FSK and ASK/OOK */ + PRE_SEQ_0011 = 0x02, /* Suitable for 2-(G)FSK and ASK/OOK (not recommended - not the most convenient for the receiver) */ + PRE_SEQ_1100 = 0x03, /* Suitable for 2-(G)FSK and ASK/OOK (not recommended - not the most convenient for the receiver) */ + PRE_SEQ_0111 = 0x00, /* Suitable for 4-(G)FSK */ + PRE_SEQ_0010 = 0x01, /* Suitable for 4-(G)FSK */ + PRE_SEQ_1101 = 0x02, /* Suitable for 4-(G)FSK */ + PRE_SEQ_1000 = 0x03 /* Suitable for 4-(G)FSK */ +} MRSubG_PreambleSeq; + +/** + * @brief STM32WL3 preamble pattern enumeration + */ +typedef enum +{ + POST_SEQ_0101 = 0x00, /* 010101... */ + POST_SEQ_1010 = 0x01, /* 101010... */ + POST_SEQ_OTHER = 0x02 /* depends on last payload/CRC bit. If 0: 101010... - If 1: 010101... */ +} MRSubG_PostambleSeq; + +/** +* @brief STM32WL3 packet coding options +*/ +typedef enum +{ + CODING_NONE = 0x00, /* None */ + CODING_FEC = 0x01, /* FEC in TX / Viterbi in RX */ + CODING_3o6 = 0x02, /* 3of6 coding */ + CODING_MANCHESTER = 0x03 /* Manchester coding */ +} MRSubG_PcktCoding; + +/** +* @brief Whitening before FEC feature +*/ +typedef enum +{ + FEC_THEN_WHITENING = 0, + WHITENING_THEN_FEC = 1 +} MRSubG_WhiteningBeforeFECType; + +/** + * @brief Manchester encoding polarity. + * 0: "0" is encoded with "01" and "1" is encoded with "10" + * 1: "0" is encoded with "10" and "1" is encoded with "01" + */ +typedef enum +{ + MANCHESTER_TYPE0 = 0, + MANCHESTER_TYPE1 = 1 +} MRSubG_ManchesterPolarity; + +/** + * @brief CRC length in bytes enumeration. + */ +typedef enum { + PKT_NO_CRC = 0x00, /*!< No CRC */ + PKT_CRC_MODE_8BITS = 0x01, /*!< CRC length 8 bits - poly: 0x07 */ + PKT_CRC_MODE_16BITS_1 = 0x02, /*!< CRC length 16 bits - poly: 0x8005 */ + PKT_CRC_MODE_16BITS_2 = 0x03, /*!< CRC length 16 bits - poly: 0x1021 */ + FCS_16BIT = 0x03, /*!< CRC length 16 bits - poly: 0x1021 */ + PKT_CRC_MODE_24BITS = 0x04, /*!< CRC length 24 bits - poly: 0x864CFB */ + PKT_CRC_MODE_32BITS = 0x05, /*!< CRC length 32 bits - poly: 0x04C11DB7 */ + FCS_32BIT = 0x05, /*!< CRC length 32 bits - poly: 0x04C11DB7 */ +} MRSubG_PcktCrcMode; + +/** + * @brief Fixed or Variable length mode. + * 0: FIXED length mode (no LENGTH field added in the frame in TX and no decode in RX) + * 1: VARIABLE length mode (LENGTH field put in the frame in TX and decoded in RX) + */ +typedef enum +{ + FIXED = 0, + VARIABLE = !FIXED +} MRSubG_LengthMode; + +/** + * @brief 1 or 2 bytes length width. + * 0: LENGTH bit field is defined on 1 byte + * 1: LENGTH bit field is defined on 2 bytes + */ +typedef enum +{ + BYTE_LEN_1 = 0, + BYTES_LEN_2 = 1 +} MRSubG_LenWidthhMode; + +/** +* @brief STM32WL3 Frequency Band IDs +*/ +typedef enum{ + FQCY_STANDARD = 0x00, /* Standard band */ + FQCY_169MHZ = 0x03 /* 169 MHz band */ +} MRSubG_Frequency_ID; + +/** + * @brief Sequencer flag bits + */ +typedef enum { + /* Indicating if the low power mode was allowed during the wait interval since last SeqAction execution */ + SEQ_FLAG_SLEEPENABLE = 0x01, + + /* Enable/disable a force reload of the Static registers even if no reset occurs since last reload */ + SEQ_FLAG_FORCERELOAD = 0x02, + + /* Clear the internal seq_event_status bus before to start the SeqAction */ + SEQ_FLAG_CLEAREVENTS = 0x04 + +} MRSubG_Sequencer_Flags; + +typedef struct MRSubG_Sequencer_ActionConfiguration MRSubG_Sequencer_ActionConfiguration; + +/** + * @brief Sequencer ActionConfiguration RAM table structure + */ +struct MRSubG_Sequencer_ActionConfiguration { + /* + * NextAction1 + */ + /** Pointer to NextAction1, executed upon NextAction1Mask match. */ + MRSubG_Sequencer_ActionConfiguration* NextAction1Ptr; + + /** Time to wait before NextAction1 execution, in interpolated absolute time units. */ + uint32_t NextAction1Interval; + + /** Bitmask for NextAction1 - if SubGHz status register against matches against this mask, NextAction1 is performed next. */ + uint32_t NextAction1Mask; + + /** Configuration flags (ForceClearEvents, ForceReload and SleepEn) for sequencer hardware, set if NextAction1 is performed next. */ + uint32_t NextAction1Ctrl; + + /* NextAction2 */ + /** Pointer to NextAction2, executed upon NextAction1Mask match. */ + MRSubG_Sequencer_ActionConfiguration* NextAction2Ptr; + + /** Time to wait before NextAction2 execution, in interpolated absolute time units. */ + uint32_t NextAction2Interval; + + /** Bitmask for NextAction2 - if SubGHz status register against matches against this mask, NextAction2 is performed next. */ + uint32_t NextAction2Mask; + + /** Configuration flags (ForceClearEvents, ForceReload and SleepEn) for sequencer hardware, set if NextAction2 is performed next. */ + uint32_t NextAction2Ctrl; + + /** Time to wait for either NextAction1Mask or NextAction2Mask match before aborting, in interpolated absolute time units. + * Set to 0 for no timeout. */ + uint32_t ActionTimeout; + + /** Dynamic Register Configuration, applied for the current action. */ + MR_SUBG_GLOB_DYNAMIC_TypeDef DynamicConfigReg; +}; + +/** + * @brief Sequencer GlobalConfiguration RAM table structure + */ +typedef struct { + /** Pointer to first ActionConfiguration */ + volatile MRSubG_Sequencer_ActionConfiguration* ActionConfigPtr; + + /** Configuration flags (ForceClearEvents, ForceReload and SleepEn) for sequencer hardware. */ + volatile uint32_t Flags; + + /** SubGHz static configuration registers. */ + MR_SUBG_GLOB_STATIC_TypeDef StaticConfigReg; +} MRSubG_Sequencer_GlobalConfiguration; + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup MRSUBG_LL_Exported_Functions MRSUBG Exported Functions + * @{ + */ + +/** +* @brief Set the PA Mode. +* @param paMode the PA Mode. +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_SetPAMode(MRSubG_PAMode paMode){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PA_CONFIG, MR_SUBG_GLOB_STATIC_PA_CONFIG_PA_MODE, paMode); +} + +/** +* @brief Set the PA Drive Mode. +* @param paDrvMode the PA Drive Mode. +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_SetPADriveMode(MRSubG_PA_DRVMode paDrvMode){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PA_CONFIG, MR_SUBG_GLOB_STATIC_PA_CONFIG_PA_DRV_MODE, paDrvMode); +} + +/** +* @brief Get the PA Drive Mode. +* @retval The PA Drive Mode. +*/ +__STATIC_INLINE MRSubG_PA_DRVMode LL_MRSubG_GetPADriveMode(void){ + return (MRSubG_PA_DRVMode) READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PA_CONFIG, MR_SUBG_GLOB_STATIC_PA_CONFIG_PA_DRV_MODE); +} + +/** +* @brief Force the SYNC word to be formatted as 2-(G)FSK bit mapping instead of 4-(G)FSK. +* @param forceSync DISABLE: the SYNC word is treated in 4-(G)FSK mapping as the rest of the frame. +* ENABLE: the SYNC word of the frame is mapped as follows +* '1' is mapped to +Fdev; '0' is mapped to -Fdev for constellation mapping = 0 and 1 +* '1' is mapped to -Fdev; '0' is mapped to +Fdev for constellation mapping = 2 and 3 +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_Force2FSKSync(FunctionalState forceSync){ + if(forceSync == ENABLE) + SET_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_FORCE_2FSK_SYNC_MODE); + else + CLEAR_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_FORCE_2FSK_SYNC_MODE); +} + +/** + * @brief Set the CONST_MAP configuration for + * 2-(G)FSK or 4-(G)FSK + * @param nConMap the configuration. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetConstellationMapping(uint8_t nConMap){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_CONST_MAP, nConMap); +} + +/** + * @brief Invert bit to symbol mapping for 4(G)FSK + * @param xNewState new state for FOUR_FSK_SYM_SWAP bit + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SwapSymbolMapping(FunctionalState xNewState){ + if(xNewState == ENABLE) + SET_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_FOUR_FSK_SYM_SWAP); + else + CLEAR_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_FOUR_FSK_SYM_SWAP); +} + +/** + * @brief Select BT value for GFSK + * @param bSel BT value + * This value is type of @ref MRSubG_BTSelect. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetBTSel(MRSubG_BTSelect bSel){ + if(bSel == BT_05) + SET_BIT(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_BT_SEL); + else + CLEAR_BIT(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_BT_SEL); +} + +/** + * @brief Select BT value for GFSK + * @param xNewState BT value + * This value is type of @ref MRSubG_BTSelect. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetFrequencyInterpolator(FunctionalState xNewState){ + if(xNewState == ENABLE) + SET_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_MOD_INTERP_EN); + else + CLEAR_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_MOD_INTERP_EN); +} + +/** + * @brief Set the ISI cancellation equalizer + * @param isiEq the Equalizer value + * This value is type of @ref MRSubG_ISIEQMode. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetISIEqualizer(MRSubG_ISIEQMode isiEq){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->AS_QI_CTRL, MR_SUBG_GLOB_STATIC_AS_QI_CTRL_AS_EQU_CTRL, isiEq); +} + +/** + * @brief Send a specific command to the STM32WL3. + * @param xCommandCode code of the command to send. + This parameter can be any value of @ref MRSubGCmd. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_StrobeCommand(MRSubGCmd xCommandCode) { + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->COMMAND, MR_SUBG_GLOB_DYNAMIC_COMMAND_COMMAND_ID, xCommandCode); +} + +/** + * @brief Set the TX_MODE field of the PCKT_CTRL register. + * @param txMode The TX Mode. + * This parameter can be any value of @ref MRSubGTXMode. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetTXMode(MRSubGTXMode txMode){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_TX_MODE, txMode); +} + +/** + * @brief Sets the RX_MODE field of PCKT_CTRL register. + * @param rxMode the rx mode. + * This parameter can be any value of @ref MRSubGRXMode. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetRXMode(MRSubGRXMode rxMode){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_RX_MODE, rxMode); +} + +/** +* @brief Sets the channel number. +* @param cChannel the channel number. +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_SetChannel(uint8_t cChannel){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->ADDITIONAL_CTRL, MR_SUBG_GLOB_DYNAMIC_ADDITIONAL_CTRL_CH_NUM, cChannel); +} + +/** +* @brief Returns the actual channel number. +* @retval uint8_t Actual channel number. +*/ +__STATIC_INLINE uint8_t LL_MRSubG_GetChannel(void){ + return READ_REG(MR_SUBG_GLOB_DYNAMIC->ADDITIONAL_CTRL) & MR_SUBG_GLOB_DYNAMIC_ADDITIONAL_CTRL_CH_NUM; +} + +/** +* @brief Set the channel spacing factor in channel space register. +* The channel spacing is From ~732 Hz to ~187 kHz in 732 Hz steps +* @param lChannelSpace the channel spacing expressed in Hz. +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_SetChannelSpace(uint8_t lChannelSpace){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->ADDITIONAL_CTRL, MR_SUBG_GLOB_DYNAMIC_ADDITIONAL_CTRL_CH_SPACING, lChannelSpace); +} + +/** +* @brief Return the channel space register. +* @retval uint8_t Channel spacing. +*/ +__STATIC_INLINE uint8_t LL_MRSubG_GetChannelSpace(void){ + return READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->ADDITIONAL_CTRL, MR_SUBG_GLOB_DYNAMIC_ADDITIONAL_CTRL_CH_SPACING); +} + +/** +* @brief Set the PA_DEGEN_ON bit. This will Enable/Disable a degeneration mode, which introduces a pre-distortion to linearize the power control curve. +* @param xNewState enable (ENABLE) to enable or disable (DISABLE) the degeneration. +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_SetPADegen(FunctionalState xNewState) { + if(xNewState == ENABLE) { + SET_BIT(MR_SUBG_RADIO->PA_REG, MR_SUBG_RADIO_PA_REG_PA_DEGEN_ON); + } else { + CLEAR_BIT(MR_SUBG_RADIO->PA_REG, MR_SUBG_RADIO_PA_REG_PA_DEGEN_ON); + } +} + +/** +* @brief Returns the actual PA_LEVEL_MAX_INDEX. +* @retval uint8_t Actual PA_LEVEL_MAX_INDEX. This parameter will be in the range [0:7]. +*/ +__STATIC_INLINE uint8_t LL_MRSubG_GetPALevelMaxIndex(void){ + return READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PA_CONFIG, MR_SUBG_GLOB_STATIC_PA_CONFIG_PA_LEVEL_MAX_INDEX); +} + +/** +* @brief Sets a specific PA_LEVEL_MAX_INDEX. +* @param cIndex PA_LEVEL_MAX_INDEX to set. +* @retval None +*/ +__STATIC_INLINE void LL_MRSubG_SetPALevelMaxIndex(uint8_t cIndex){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PA_CONFIG, MR_SUBG_GLOB_STATIC_PA_CONFIG_PA_LEVEL_MAX_INDEX, cIndex); +} + +/** + * @brief Set the Almost Empty threshold for the Databuffer. When the number of elements in Databuffer reaches this value an interrupt can can be generated. + * @param cThrTx: almost empty threshold. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetAlmostEmptyThresholdTx(uint16_t cThrTx){ + /* Writes the Almost Empty threshold for Tx in the corresponding register */ + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->DATABUFFER_THR, MR_SUBG_GLOB_DYNAMIC_DATABUFFER_THR_TX_ALMOST_EMPTY_THR, cThrTx); +} + +/** + * @brief Set the almost full threshold for the Databuffer. When the number of elements in Databuffer reaches this value an interrupt can be generated. + * @param cThrRx almost full threshold. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetAlmostFullThresholdRx(uint16_t cThrRx){ + /* Writes the Almost Full threshold for Tx in the corresponding register */ + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->DATABUFFER_THR, MR_SUBG_GLOB_DYNAMIC_DATABUFFER_THR_RX_ALMOST_FULL_THR, cThrRx); +} + +/** + * @brief Return the RADIO FSM State. + * @retval Value of RADIO_FSM_STATE register + */ +__STATIC_INLINE MRSubGFSMState LL_MRSubG_GetRadioFSMState(void){ + return (MRSubGFSMState)(READ_REG_FIELD(MR_SUBG_GLOB_STATUS->RADIO_FSM_INFO, MR_SUBG_GLOB_STATUS_RADIO_FSM_INFO_RADIO_FSM_STATE)); +} + +/** + * @brief Set the PREAMBLE field Length. + * @param cPreambleLength length of PREAMBLE field in pairs of bits (0 to 2046 bits). + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetPreambleLength(uint16_t cPreambleLength){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_PREAMBLE_LENGTH, cPreambleLength); +} + +/** + * @brief Return the PREAMBLE field Length. + * @retval uint16_t Preamble field length in in pairs of bits (0 to 2046 bits). + */ +__STATIC_INLINE uint16_t LL_MRSubG_GetPreambleLength(void){ + return READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_PREAMBLE_LENGTH); +} + +/** + * @brief Set the PREAMBLE pattern to be applied. + * @param cPreambleSeq the pattern to apply + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetPreambleSeq(MRSubG_PreambleSeq cPreambleSeq){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_PREAMBLE_SEQ, (uint8_t)cPreambleSeq); +} + +/** + * @brief Return the PREAMBLE pattern. + * @retval MRSubG_PreambleSeq Preamble pattern + */ +__STATIC_INLINE MRSubG_PreambleSeq LL_MRSubG_GetPreambleSeq(void){ + return (MRSubG_PreambleSeq)(READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_PREAMBLE_SEQ)); +} + +/** + * @brief Set the POSTAMBLE field Length. + * @param cPostambleLength length of POSTAMBLE field in pairs of bits (0 to 126 bits). + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetPostambleLength(uint16_t cPostambleLength){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_POSTAMBLE_LENGTH, cPostambleLength); +} + +/** + * @brief Return the POSTAMBLE field Length. + * @retval uint16_t Postamble field length in in pairs of bits (0 to 126 bits). + */ +__STATIC_INLINE uint16_t LL_MRSubG_GetPostambleLength(void){ + return READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_POSTAMBLE_LENGTH); +} + +/** + * @brief Set the POSTAMBLE pattern to be applied. + * @param cPostambleSeq the pattern to apply + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetPostamblSeq(MRSubG_PostambleSeq cPostambleSeq){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_POSTAMBLE_SEQ, (uint8_t)cPostambleSeq); +} + +/** + * @brief Return the POSTAMBLE pattern. + * @retval MRSubG_PostambleSeq Postamble pattern + */ +__STATIC_INLINE MRSubG_PostambleSeq LL_MRSubG_GetPostambleSeq(void){ + return (MRSubG_PostambleSeq)(READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_POSTAMBLE_SEQ)); +} + +/** + * @brief Set the SYNC_PRESENT bit. + * @param cSyncPresent the enable/disable value for the bit + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetSyncPresent(FunctionalState cSyncPresent){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_SYNC_PRESENT, cSyncPresent); +} + +/** + * @brief Get the SYNC_PRESENT bit. + * @retval The enable/disable value for the bit. + */ +__STATIC_INLINE FunctionalState LL_MRSubG_GetSyncPresent(void){ + return (FunctionalState)(READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_SYNC_PRESENT)); +} + +/** + * @brief Set the SECONDARY_SYNC_SEL bit. + In TX mode: this bit selects which synchro word is sent on the frame between SYNC and SEC_SYNC + In RX mode: it enables the detection of SEC_SYNC in parallel of SYNC word. + * @param cSecondarySync the enable/disable value for the bit + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetSecondarySync(FunctionalState cSecondarySync){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_SECONDARY_SYNC_SEL, cSecondarySync); +} + +/** + * @brief Get the SECONDARY_SYNC_SEL bit. + * @retval The enable/disable value for the bit. + */ +__STATIC_INLINE FunctionalState LL_MRSubG_GetSecondarySync(void){ + return (FunctionalState)(READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_SECONDARY_SYNC_SEL)); +} + +/** + * @brief Set the SYNC field Length. + * @param cSyncLength length of SYNC field in bits. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetSyncLength(uint8_t cSyncLength){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_SYNC_LEN, cSyncLength); +} + +/** + * @brief Return the SYNC field Length. + * @retval uint8_t Sync field length in bits. + */ +__STATIC_INLINE uint8_t LL_MRSubG_GetSyncLength(void){ + return READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_SYNC_LEN); +} + +/** +* @brief Set the SYNC word. +* @param lSyncWord SYNC word given as a 32 bits aligned word. +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_SetSyncWord(uint32_t lSyncWord){ + WRITE_REG(MR_SUBG_GLOB_STATIC->SYNC, lSyncWord); +} + +/** +* @brief Get the SYNC word. +* @retval The Sync word. +*/ +__STATIC_INLINE uint32_t LL_MRSubG_GetSyncWord(void){ + return READ_REG(MR_SUBG_GLOB_STATIC->SYNC); +} + + +/** +* @brief Set the SEC_SYNC word. +* @param lSecSyncWord SEC_SYNC word given as a 32 bits aligned word. +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_SetSecondarySyncWord(uint32_t lSecSyncWord){ + WRITE_REG(MR_SUBG_GLOB_STATIC->SEC_SYNC, lSecSyncWord); +} + +/** +* @brief Get the SEC_SYNC word. +* @retval The Secondary Sync word. +*/ +__STATIC_INLINE uint32_t LL_MRSubG_GetSecondarySyncWord(void){ + return READ_REG(MR_SUBG_GLOB_STATIC->SEC_SYNC); +} + +/** + * @brief Enable or Disable WHITENING for STM32WL3 packets. + * @param xNewState new state for WHITENING mode. + * This parameter can be S_ENABLE or S_DISABLE. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_PacketHandlerWhitening(FunctionalState xNewState){ + if(xNewState == ENABLE) + SET_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_WHIT_EN); + else + CLEAR_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_WHIT_EN); +} + +/** + * @brief Enable or Disable BYTE_SWAP for STM32WL3 packets. + * @param xNewState new state for BYTE_SWAP mode. + * This parameter can be S_ENABLE or S_DISABLE. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_PacketHandlerByteSwap(FunctionalState xNewState){ + if(xNewState == ENABLE) + SET_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_BYTE_SWAP); + else + CLEAR_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_BYTE_SWAP); +} + +/** + * @brief Set the Fec and Whitening order + * @param xWhitFecOrder new Whitening/FEC order. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_PacketHandlerWhiteningFecOrder(MRSubG_WhiteningBeforeFECType xWhitFecOrder){ + if(xWhitFecOrder == WHITENING_THEN_FEC) + SET_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_WHIT_BF_FEC); + else + CLEAR_BIT(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_WHIT_BF_FEC); +} + +/** + * @brief Set the Whitening initialization value + * @param whit_init Whitening initialization value. + * In 802.15.4 standard, this initialization seed must be programmed to 0x1FF. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_PacketHandlerSetWhiteningInit(uint16_t whit_init){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_WHIT_INIT, whit_init); +} + +/** +* @brief Set the type of coding and decoding for the packets. +* @param cCoding coding/decoding selection. +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_PacketHandlerCoding(MRSubG_PcktCoding cCoding){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_CODING_SEL, cCoding); +} + +/** +* @brief Set the Manchester type for the packets. +* @param manType the Manchester encoding polarity. +* 0: '0' is encoded with '01' and '1' is encoded with '10' +* 1: '0' is encoded with '10' and '1' is encoded with '01' +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_PacketHandlerManchesterType(MRSubG_ManchesterPolarity manType){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_MANCHESTER_TYPE, manType); +} + +/** +* @brief Set the CRC mode. +* @param xPktCrcMode This parameter can be one among the @ref MRSubG_PcktCrcMode . +* @retval None. +*/ +__STATIC_INLINE void LL_MRSubG_PacketHandlerSetCrcMode(MRSubG_PcktCrcMode xPktCrcMode){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_CRC_MODE, xPktCrcMode); +} + +/** +* @brief Get the CRC mode. +* @retval MRSubG_PcktCrcMode CRC mode in the @ref MRSubG_PcktCrcMode enum. +*/ +__STATIC_INLINE MRSubG_PcktCrcMode LL_MRSubG_PacketHandlerGetCrcMode(void){ + return (MRSubG_PcktCrcMode)(READ_REG(MR_SUBG_GLOB_STATIC->PCKT_CONFIG) & MR_SUBG_GLOB_STATIC_PCKT_CONFIG_CRC_MODE); +} + +/** + * @brief Set the PCKTLEN field of the PCKTLEN_CONFIG register. + * @param nPacketLen payload length in bytes. + * @retval None. + */ +__STATIC_INLINE void LL_MRSUBG_SetPacketLength(uint16_t nPacketLen){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->PCKTLEN_CONFIG, MR_SUBG_GLOB_DYNAMIC_PCKTLEN_CONFIG_PCKTLEN, nPacketLen); +} + +/** + * @brief Get the PCKTLEN field of the PCKTLEN_CONFIG register. + * @retval Payload length in bytes. + */ +__STATIC_INLINE uint16_t LL_MRSUBG_GetPacketLength(void){ + return READ_REG(MR_SUBG_GLOB_DYNAMIC->PCKTLEN_CONFIG) & MR_SUBG_GLOB_DYNAMIC_PCKTLEN_CONFIG_PCKTLEN; +} + +/** + * @brief Set the FIX_VAR_LEN field of the PCKT_CONFI register. + * @param lenType length mode. + * 0: FIXED length mode (no LENGTH field added in the frame in TX and no decode in RX) + * 1: VARIABLE length mode (LENGTH field put in the frame in TX and decoded in RX) + * @retval None. + */ +__STATIC_INLINE void LL_MRSUBG_SetFixedVariableLength(MRSubG_LengthMode lenType){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_FIX_VAR_LEN, lenType); +} + +/** + * @brief Get the FIX_VAR_LEN field of the PCKT_CONFI register. + * @retval The Fixed/Variable length mode. + */ +__STATIC_INLINE MRSubG_LengthMode LL_MRSUBG_GetFixedVariableLength(void){ + return (MRSubG_LengthMode)(READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_FIX_VAR_LEN)); +} + +/** + * @brief Return the payload length for the Basic packet format. + * @retval Payload length in bytes. + */ +__STATIC_INLINE uint16_t LL_MRSubG_PktBasicGetPayloadLength(void){ + return READ_REG(MR_SUBG_GLOB_STATIC->DATABUFFER_SIZE) & MR_SUBG_GLOB_STATIC_DATABUFFER_SIZE_DATABUFFER_SIZE; +} + +/** + * @brief Indicates if the LENGTH field is defined on 1 byte or 2 bytes. + * @param lenWidth the length field to set. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetLenWidth(MRSubG_LenWidthhMode lenWidth){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_LEN_WIDTH, lenWidth); +} + +/** + * @brief Return the LENGTH field, defined on 1 byte or 2 bytes. + * @retval The LENGTH field. + */ +__STATIC_INLINE MRSubG_LenWidthhMode LL_MRSubG_GetLenWidth(void){ + return (MRSubG_LenWidthhMode)(READ_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_LEN_WIDTH)); +} + +/** + * @brief Enable or Disable RX_TIMER_RX_CS_TIMEOUT flag. + * @param xNewState new state for RX_TIMER_RX_CS_TIMEOUT flag. + * This parameter can be ENABLE or DISABLE. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetRxCsTimeout(FunctionalState xNewState){ + if(xNewState == ENABLE) + SET_BIT(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_CS_TIMEOUT_MASK); + else + CLEAR_BIT(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_CS_TIMEOUT_MASK); +} + +/** + * @brief Enable or Disable RX_TIMER_RX_PQI_TIMEOUT flag. + * @param xNewState new state for RX_TIMER_RX_PQI_TIMEOUT flag. + * This parameter can be ENABLE or DISABLE. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetRxPqiTimeout(FunctionalState xNewState){ + if(xNewState == ENABLE) + SET_BIT(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_PQI_TIMEOUT_MASK); + else + CLEAR_BIT(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_PQI_TIMEOUT_MASK); +} + +/** + * @brief Enable or Disable RX_TIMER_RX_SQI_TIMEOUT flag. + * @param xNewState new state for RX_TIMER_RX_SQI_TIMEOUT flag. + * This parameter can be ENABLE or DISABLE. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetRxSqiTimeout(FunctionalState xNewState){ + if(xNewState == ENABLE) + SET_BIT(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_SQI_TIMEOUT_MASK); + else + CLEAR_BIT(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_SQI_TIMEOUT_MASK); +} + +/** + * @brief Set or Reset RX_TIMER_RX_OR_nAND_SELECT. + * @param xNewState new state for RX_TIMER_RX_OR_nAND_SELECT bit. + * This parameter can be SET or RESET. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_SetRxOrnAndSelect(FlagStatus xNewState){ + if(xNewState == SET) + SET_BIT(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_OR_nAND_SELECT); + else + CLEAR_BIT(MR_SUBG_GLOB_DYNAMIC->RX_TIMER, MR_SUBG_GLOB_DYNAMIC_RX_TIMER_RX_OR_nAND_SELECT); +} + +/** + * @brief Enable or Disable FAST_CS_TERM. + * @param xNewState new state for FAST_CS_TERM_EN. + * This parameter can be S_ENABLE or S_DISABLE. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_FastCsTermEn(FunctionalState xNewState){ + if(xNewState == ENABLE) + SET_BIT(MR_SUBG_GLOB_DYNAMIC->FAST_RX_TIMER, MR_SUBG_GLOB_DYNAMIC_FAST_RX_TIMER_FAST_CS_TERM_EN); + else + CLEAR_BIT(MR_SUBG_GLOB_DYNAMIC->FAST_RX_TIMER, MR_SUBG_GLOB_DYNAMIC_FAST_RX_TIMER_FAST_CS_TERM_EN); +} + +/** + * @brief Set or Reset VCO_CALIB_REQ. + * @param xNewState new state for VCO_CALIB_REQ bit. + * This parameter can be SET or RESET. + * @retval None. + */ +__STATIC_INLINE void LL_MRSubG_VCOCalibReq(FlagStatus xNewState){ + if(xNewState == SET) + SET_BIT(MR_SUBG_GLOB_DYNAMIC->VCO_CAL_CONFIG, MR_SUBG_GLOB_DYNAMIC_VCO_CAL_CONFIG_VCO_CALIB_REQ); + else + CLEAR_BIT(MR_SUBG_GLOB_DYNAMIC->VCO_CAL_CONFIG, MR_SUBG_GLOB_DYNAMIC_VCO_CAL_CONFIG_VCO_CALIB_REQ); +} + +/** + * @brief Return the CHFLT_E field. + * @retval The CHFLT_E field. + */ +__STATIC_INLINE uint8_t LL_MRSubG_GetChFlt_E(void){ + return READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD1_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD1_CONFIG_CHFLT_E); +} + +/** + * @brief Return the RSSI_LEVEL_ON_SYNC register. + * @retval The RSSI Level On Sync value. + */ +__STATIC_INLINE uint16_t LL_MRSubG_GetRssiLevelOnSync(void){ + return READ_REG(MR_SUBG_GLOB_STATUS->RX_INDICATOR) & MR_SUBG_GLOB_STATUS_RX_INDICATOR_RSSI_LEVEL_ON_SYNC; +} + +/** + * @brief Set the MRSUBG RSSI_FLT register. + * @retval The value to store for the register. + */ +__STATIC_INLINE void LL_MRSubG_SetRSSIFilter(uint32_t rssiFilter){ + WRITE_REG(MR_SUBG_RADIO->RSSI_FLT, rssiFilter); +} + +/** + * @brief Set the RSSI threshold register. + * @retval The value to store for the signal detect threshold. + */ +__STATIC_INLINE void LL_MRSubG_SetRssiThresholdRegister(uint16_t rssiValReg){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->AS_QI_CTRL, MR_SUBG_GLOB_STATIC_AS_QI_CTRL_RSSI_THR, rssiValReg); +} + +/** + * @brief Set the MRSUBG Clock Recovery 0 register. + * @retval The value to store for the register. + */ +__STATIC_INLINE void LL_MRSubG_SetClkRecCtrl0(uint32_t clkRec){ + WRITE_REG(MR_SUBG_RADIO->CLKREC_CTRL0, clkRec); +} + +/** + * @brief Set the MRSUBG Clock Recovery 1 register. + * @retval The value to store for the register. + */ +__STATIC_INLINE void LL_MRSubG_SetClkRecCtrl1(uint32_t clkRec){ + WRITE_REG(MR_SUBG_RADIO->CLKREC_CTRL1, clkRec); +} + +/** + * @brief Set the MRSUBG AFC0 register. + * @retval The value to store for the AFC0_CONFIG register. + */ +__STATIC_INLINE void LL_MRSubG_SetAFC0(uint32_t afcCfg){ + WRITE_REG(MR_SUBG_RADIO->AFC0_CONFIG, afcCfg); +} + +/** + * @brief Set the MRSUBG AFC1 register. + * @retval The value to store for the AFC1_CONFIG register. + */ +__STATIC_INLINE void LL_MRSubG_SetAFC1(uint32_t afcCfg){ + WRITE_REG(MR_SUBG_RADIO->AFC1_CONFIG, afcCfg); +} + +/** + * @brief Set the MRSUBG AFC2 register. + * @retval The value to store for the AFC2_CONFIG register. + */ +__STATIC_INLINE void LL_MRSubG_SetAFC2(uint32_t afcCfg){ + WRITE_REG(MR_SUBG_RADIO->AFC2_CONFIG, afcCfg); +} + +/** + * @brief Set the MRSUBG AFC3 register. + * @retval The value to store for the AFC3_CONFIG register. + */ +__STATIC_INLINE void LL_MRSubG_SetAFC3(uint32_t afcCfg){ + WRITE_REG(MR_SUBG_RADIO->AFC3_CONFIG, afcCfg); +} + +/** + @verbatim + ============================================================================== + ##### How to use the MRSUBG Radio Sequencer ##### + ============================================================================== + [..] + The LL_SEQUENCER driver contains a set of APIs that can be used to configure + the STM32WL3 MRSubG sequencer hardware. + Typically it is used as follows: + + *** Step 1: Set up ActionConfiguration tables *** + ================================================= + [..] + In this step, configuration RAM tables are created for all actions in the + flow graph. + + (+) Allocate a MRSubG_Sequencer_ActionConfiguration struct for each action + that is part of your flow graph. The sequencer hardware accesses this + struct in RAM as the ActionConfiguration RAM table. + It must persist in RAM while the Action is being executed. + Make sure that the RAM table is word-aligned. + + (+) For each ActionConfiguration item: + + (++) Set up the dynamic registers (MR_SUBG_GLOB_DYNAMIC) of the STM32WL3 + as desired upon execution of the action. This can be performed + using the standard MRSubG_* and packet APIs. + Do not issue any command in the meantime (i.e., keep COMMAND_ID in + the COMMAND to 0) to prevent side effects. + (++) Copy all dynamic register values to the ActionConfiguration RAM + table using MRSubG_Sequencer_ApplyDynamicConfig and configure + which command is issued when the action gets executed. + (++) Change the appropriate values in the + MRSubG_Sequencer_ActionConfiguration struct to configure under + which conditions either NextAction1 or NextAction2 are executed, + to provide a pointer to ActionConfiguration RAM tables for both + actions and to configure inter-action intervals. + Use SEQ_MASK_NEVER_MATCH as NextAction1Mask / NextAction2Mask to + ensure that this particular next action is never executed. + (++) You may choose to configure an ActionTimeout, i.e. limit the + maximum time to wait for a mask match for either NextAction1 or + NextAction2. + + *** Step 2: Set up GlobalConfiguration table *** + ================================================ + [..] + In this step, a single configuration RAM table containing the global + sequencer properties and the contents of the static configuration + registers is created. + + (+) Allocate a MRSubG_Sequencer_GlobalConfiguration struct. + The sequencer hardware accesses this struct in RAM as the + GlobalConfiguration RAM table. The sequencer hardware will update + properties of this RAM table during operation. + + (+) Modify the GlobalConfiguration struct: + + (++) Set up the static registers (MR_SUBG_GLOB_STATIC) of the STM32WL3 + as desired upon execution of the action. This can be performed + using the standard MRSubG_* and packet APIs. + (++) Copy all static register values to the GlobalConfiguration RAM + table using MRSubG_Sequencer_ApplyStaticConfig. + (++) Set the current (i.e., first) action to execute by making + ActionConfigPtr point to the appropriate ActionConfiguration. + + (+) Tell the sequencer hardware where to find the GlobalConfiguration + by calling LL_MRSubG_Sequencer_SetGlobalConfiguration. + + *** Step 3: Trigger the sequencer *** + ===================================== + [..] + (+) When desired, start the sequencer using MRSubG_Sequencer_Trigger. + + (+) You may choose to intervene into the sequencer control flow + programmatically using, for example, an interrupt. + + (+) If, at any point, you need to restart the sequencer: + + (++) Set the action to execute next by modifying ActionConfigPtr in + the GlobalConfiguration struct. + (++) Re-trigger the sequencer using MRSubG_Sequencer_Trigger. + @endverbatim +**/ + +/* + * @brief Set global configuration table for sequencer hardware. + * @param Pointer to the global configuration table struct. + * @retval None + */ +__STATIC_INLINE void LL_MRSubG_Sequencer_SetGlobalConfiguration(MRSubG_Sequencer_GlobalConfiguration *cfg){ + /* GLOBALTABLE_PTR is relative to device SRAM base address */ + MR_SUBG_GLOB_RETAINED->SEQ_GLOBALTABLE_PTR = ((uint32_t)cfg) - SRAM_BASE; +} + +/* + * @brief Determine whether sequencer hardware is currently active. + * @retval 1 in case sequencer is active, otherwise 0 + */ +__STATIC_INLINE uint8_t LL_MRSubG_Sequencer_IsActive(void){ + return (MR_SUBG_GLOB_MISC->SEQUENCER_CTRL & MR_SUBG_GLOB_MISC_SEQUENCER_CTRL_DISABLE_SEQ) ? 0 : 1; +} + +/* + * @brief Trigger sequencer, i.e., launch sequence of actions. + * @retval None + */ +__STATIC_INLINE void LL_MRSubG_Sequencer_Trigger(void){ + MR_SUBG_GLOB_MISC->SEQUENCER_CTRL &= ~MR_SUBG_GLOB_MISC_SEQUENCER_CTRL_DISABLE_SEQ; + MR_SUBG_GLOB_MISC->SEQUENCER_CTRL |= MR_SUBG_GLOB_MISC_SEQUENCER_CTRL_GEN_SEQ_TRIGGER; +} + +/* + * @brief Disable sequencer hardware. + * @retval None + */ +__STATIC_INLINE void LL_MRSubG_Sequencer_Disable(void){ + MR_SUBG_GLOB_MISC->SEQUENCER_CTRL |= MR_SUBG_GLOB_MISC_SEQUENCER_CTRL_DISABLE_SEQ | MR_SUBG_GLOB_MISC_SEQUENCER_CTRL_GEN_SEQ_TRIGGER; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /*STM32WL3x_LL_MRSUBG_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_mrsubg_timer.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_mrsubg_timer.h new file mode 100644 index 0000000000..29348f52d2 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_mrsubg_timer.h @@ -0,0 +1,250 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_mrsubg_timer.h + * @author GPM WBL Application Team + * @brief MRSUBG Timer LL module + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef MRSUBG_TIMER_H +#define MRSUBG_TIMER_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +/** @addtogroup MRSUBG_TIMER_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup MRSUBG_TIMER_LL_Exported_Functions MRSUBG Timer Exported Functions + * @{ + */ + +/** @defgroup MRSUBG_TIMER_LL_EF_Wakeup_Timer_Configuration MRSUBG Wakeup Timer configuration + * @{ + */ + +/** + * @brief Enable MRSUBG CPU Wakeup Timer. + * @rmtoll WAKEUP_CTRL CPU_WAKEUP_EN LL_MRSUBG_TIMER_EnableCPUWakeupTimer + * @param GLOB_RETAINEDx Global Retained instance + * @retval None + */ +__STATIC_INLINE void LL_MRSUBG_TIMER_EnableCPUWakeupTimer(MR_SUBG_GLOB_RETAINED_TypeDef *GLOB_RETAINEDx) +{ + SET_BIT(GLOB_RETAINEDx->WAKEUP_CTRL, MR_SUBG_GLOB_RETAINED_WAKEUP_CTRL_CPU_WAKEUP_EN); +} + +/** + * @brief Disable Radio CPU Wakeup Timer. + * @rmtoll WAKEUP_CTRL CPU_WAKEUP_EN LL_MRSUBG_TIMER_DisableCPUWakeupTimer + * @param GLOB_RETAINEDx Global Retained instance + * @retval None + */ +__STATIC_INLINE void LL_MRSUBG_TIMER_DisableCPUWakeupTimer(MR_SUBG_GLOB_RETAINED_TypeDef *GLOB_RETAINEDx) +{ + CLEAR_BIT(GLOB_RETAINEDx->WAKEUP_CTRL, MR_SUBG_GLOB_RETAINED_WAKEUP_CTRL_CPU_WAKEUP_EN); +} + +/** + * @brief Indicates if CPU Wakeup Timer is enabled. + * @rmtoll WAKEUP_CTRL CPU_WAKEUP_EN LL_MRSUBG_TIMER_IsEnabledCPUWakeupTimer + * @param GLOB_RETAINEDx Global Retained instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MRSUBG_TIMER_IsEnabledCPUWakeupTimer(MR_SUBG_GLOB_RETAINED_TypeDef *GLOB_RETAINEDx) +{ + return ((READ_BIT(GLOB_RETAINEDx->WAKEUP_CTRL, MR_SUBG_GLOB_RETAINED_WAKEUP_CTRL_CPU_WAKEUP_EN) == (MR_SUBG_GLOB_RETAINED_WAKEUP_CTRL_CPU_WAKEUP_EN)) ? 1UL : 0UL); +} + +/** + * @brief Indicates if RFIP Wakeup Timer is enabled. + * @rmtoll WAKEUP_CTRL RFIP_WAKEUP_EN LL_MRSUBG_TIMER_IsEnabledRFIPWakeupTimer + * @param GLOB_RETAINEDx Global Retained instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_MRSUBG_TIMER_IsEnabledRFIPWakeupTimer(MR_SUBG_GLOB_RETAINED_TypeDef *GLOB_RETAINEDx) +{ + return ((READ_BIT(GLOB_RETAINEDx->WAKEUP_CTRL, MR_SUBG_GLOB_RETAINED_WAKEUP_CTRL_RFIP_WAKEUP_EN) == (MR_SUBG_GLOB_RETAINED_WAKEUP_CTRL_RFIP_WAKEUP_EN)) ? 1UL : 0UL); +} + +/** + * @brief Set the Wakeup Offset to let time to power and clocks to settle (Granularity slow clock period). + * @param GLOB_RETAINEDx Global Retained instance + * @param Time Time in slow clock period + * @retval None + */ +__STATIC_INLINE void LL_MRSUBG_TIMER_SetWakeupOffset(MR_SUBG_GLOB_RETAINED_TypeDef *GLOB_RETAINEDx, uint8_t Time) +{ + MODIFY_REG_FIELD(GLOB_RETAINEDx->WAKEUP_CTRL, MR_SUBG_GLOB_RETAINED_WAKEUP_CTRL_SOC_WAKEUP_OFFSET, (Time&0xFF)); +} + +/** + * @brief Get the Wakeup Offset (Granularity slow clock period). + * @param GLOB_RETAINEDx Global Retained instance + * @retval Wakeup Time Offset (Granulary slow clock period, size 8 bit) + */ +__STATIC_INLINE uint32_t LL_MRSUBG_TIMER_GetWakeupOffset(MR_SUBG_GLOB_RETAINED_TypeDef *GLOB_RETAINEDx) +{ + return (uint32_t)(READ_REG(GLOB_RETAINEDx->WAKEUP_CTRL)&0xFF); +} + +/** + * @brief Set the CPU Wakeup Time. + * The value to program is in interpolated absolute time granularity. + * @param GLOB_RETAINEDx Global Retained instance + * @param Time in slow clock period + * @retval None + */ +__STATIC_INLINE void LL_MRSUBG_TIMER_SetCPUWakeupTime(MR_SUBG_GLOB_RETAINED_TypeDef *GLOB_RETAINEDx, uint32_t Time) +{ + WRITE_REG(GLOB_RETAINEDx->CPU_WAKEUPTIME, Time); +} + +/** + * @brief Get the CPU Wakeup Time. + * @param GLOB_RETAINEDx Global Retained instance + * @retval CPU Wakeup Time in interpolated absolute time granularity. + */ +__STATIC_INLINE uint32_t LL_MRSUBG_TIMER_GetCPUWakeupTime(MR_SUBG_GLOB_RETAINED_TypeDef *GLOB_RETAINEDx) +{ + return (uint32_t)(READ_REG(GLOB_RETAINEDx->CPU_WAKEUPTIME)); +} + +/** + * @brief Get the RFIP Wakeup Time. + * @param GLOB_RETAINEDx Global Retained instance + * @retval RFIP Wakeup Time in interpolated absolute time granularity. + */ +__STATIC_INLINE uint32_t LL_MRSUBG_TIMER_GetRFIPWakeupTime(MR_SUBG_GLOB_RETAINED_TypeDef *GLOB_RETAINEDx) +{ + return (uint32_t)(READ_REG(GLOB_RETAINEDx->RFIP_WAKEUPTIME)); +} + +/** + * @brief Get the Absolute Time of the wakeup timer (Granularity unit is 16 x slow clock period). + * @param GLOB_MISCx Global Misc instance + * @retval Absolute Time of Wakeup Timer + */ +__STATIC_INLINE uint32_t LL_MRSUBG_TIMER_GetAbsoluteTime(MR_SUBG_GLOB_MISC_TypeDef *GLOB_MISCx) +{ + return (uint32_t)(READ_REG(GLOB_MISCx->ABSOLUTE_TIME)); +} + +/** + * @} + */ + +/** @defgroup MRSUBG_TIMER_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Clear the RFIP Wakeup interrupt flag. + * @rmtoll WAKEUP_IRQ_STATUS RFIP_WAKEUP_F LL_MRSUBG_TIMER_ClearFlag_RFIPWakeup + * @param GLOB_MISCx Global Misc instance + * @retval None + */ +__STATIC_INLINE void LL_MRSUBG_TIMER_ClearFlag_RFIPWakeup(MR_SUBG_GLOB_MISC_TypeDef *GLOB_MISCx) +{ + SET_BIT(GLOB_MISCx->WAKEUP_IRQ_STATUS, MR_SUBG_GLOB_MISC_WAKEUP_IRQ_STATUS_RFIP_WAKEUP_F); +} + +/** + * @brief Indicate whether the RFIP Wakeup interrupt flag is set + * @rmtoll WAKEUP_IRQ_STATUS RFIP_WAKEUP_F LL_MRSUBG_TIMER_IsActiveFlag_RFIPWakeup + * @param GLOB_MISCx Global Misc instance + * @retval State of bit (1 or 0). + */ + __STATIC_INLINE uint32_t LL_MRSUBG_TIMER_IsActiveFlag_RFIPWakeup(MR_SUBG_GLOB_MISC_TypeDef *GLOB_MISCx) +{ + return ((READ_BIT(GLOB_MISCx->WAKEUP_IRQ_STATUS, MR_SUBG_GLOB_MISC_WAKEUP_IRQ_STATUS_RFIP_WAKEUP_F) == (MR_SUBG_GLOB_MISC_WAKEUP_IRQ_STATUS_RFIP_WAKEUP_F)) ? 1UL : 0UL); +} + +/** + * @brief Clear the CPU Wakeup interrupt flag. + * @rmtoll WAKEUP_IRQ_STATUS CPU_WAKEUP_F LL_MRSUBG_TIMER_ClearFlag_CPUWakeup + * @param GLOB_MISCx GLobal Misc instance + * @retval None + */ +__STATIC_INLINE void LL_MRSUBG_TIMER_ClearFlag_CPUWakeup(MR_SUBG_GLOB_MISC_TypeDef *GLOB_MISCx) +{ + SET_BIT(GLOB_MISCx->WAKEUP_IRQ_STATUS, MR_SUBG_GLOB_MISC_WAKEUP_IRQ_STATUS_CPU_WAKEUP_F); +} + +/** + * @brief Indicate whether the CPU Wakeup interrupt flag is set + * @rmtoll WAKEUP_IRQ_STATUS CPU_WAKEUP_F LL_MRSUBG_TIMER_IsActiveFlag_CPUWakeup + * @param GLOB_MISCx Global Misc instance + * @retval State of bit (1 or 0). + */ + __STATIC_INLINE uint32_t LL_MRSUBG_TIMER_IsActiveFlag_CPUWakeup(MR_SUBG_GLOB_MISC_TypeDef *GLOB_MISCx) +{ + return ((READ_BIT(GLOB_MISCx->WAKEUP_IRQ_STATUS, MR_SUBG_GLOB_MISC_WAKEUP_IRQ_STATUS_CPU_WAKEUP_F) == (MR_SUBG_GLOB_MISC_WAKEUP_IRQ_STATUS_CPU_WAKEUP_F)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup MRSUBG_TIMER_LL_EF_LSI_CALIBRATION Radio Timer LSI calibration APIs + * @{ + */ + +/** + * @brief Get the SCM (slow clock measurements). + * @param GLOB_MISCx Global Misc instance + * @retval SCM value + */ +__STATIC_INLINE uint32_t LL_MRSUBG_TIMER_GetSCM(MR_SUBG_GLOB_MISC_TypeDef *GLOB_MISCx) +{ + return (uint32_t)(READ_REG(GLOB_MISCx->SCM_COUNTER_VAL)& MR_SUBG_GLOB_MISC_SCM_COUNTER_VAL_SCM_COUNTER_CURRVAL); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* MRSUBG_TIMER_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_pwr.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_pwr.h new file mode 100644 index 0000000000..431df5052c --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_pwr.h @@ -0,0 +1,2948 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_pwr.h + * @author MCD Application Team + * @brief Header file of PWR LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_PWR_H +#define STM32WL3x_LL_PWR_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants + * @{ + */ + +/** @defgroup PWR_LL_LOW_PWR_MODE Low Power mode selection + * @{ + */ +#define LL_PWR_MODE_DEEPSTOP (0x000000000U) /*!< Low Power Mode Selection DEEPSTOP mode */ +#define LL_PWR_MODE_SHUTDOWN (PWR_CR1_LPMS) /*!< Low Power Mode Selection SHUTDOWN mode */ +/** + * @} + */ + +/** @defgroup PWR_LL_RAMRET RAM Retention enable in Power Save mode + * @{ + */ +#define LL_PWR_RAMRET_1 PWR_CR2_RAMRET1 /*!< RAM1 bank retention in Power Save mode */ + +/** + * @} + */ + +/** @defgroup PWR_LL_PVDLEVEL PVDLEVEL + * @{ + */ +#define LL_PWR_PVDLEVEL_0 (0x00000000U) /*!< VPVD0 around 2.0 V */ +#define LL_PWR_PVDLEVEL_1 (PWR_CR2_PVDLS_0) /*!< VPVD1 around 2.2 V */ +#define LL_PWR_PVDLEVEL_2 (PWR_CR2_PVDLS_1) /*!< VPVD2 around 2.4 V */ +#define LL_PWR_PVDLEVEL_3 (PWR_CR2_PVDLS_1 | PWR_CR2_PVDLS_0) /*!< VPVD3 around 2.5 V */ +#define LL_PWR_PVDLEVEL_4 (PWR_CR2_PVDLS_2) /*!< VPVD4 around 2.6 V */ +#define LL_PWR_PVDLEVEL_5 (PWR_CR2_PVDLS_2 | PWR_CR2_PVDLS_0) /*!< VPVD5 around 2.8 V */ +#define LL_PWR_PVDLEVEL_6 (PWR_CR2_PVDLS_2 | PWR_CR2_PVDLS_1) /*!< VPVD6 around 2.9 V */ +#define LL_PWR_PVDLEVEL_7 (PWR_CR2_PVDLS) /*!< External input analog voltage (Compare internally to VBGP) */ +/** + * @} + */ + +/** @defgroup PWR_LL_WAKEUP_SOURCE_PORT IO Port for wakeup source + * @{ + */ +#define LL_PWR_WAKEUP_PORTA (0x00000000U) /*!< IO port A to get out from DEEPSTOP mode */ +#define LL_PWR_WAKEUP_PORTB (0x00000001U) /*!< IO port B to get out from DEEPSTOP mode */ +/** + * @} + */ + + +/** @defgroup PWR_LL_WAKEUP_SOURCE Wakeup Source + * @{ + */ + +#define LL_PWR_WAKEUP_ALL 0x0000FFFF /*!< Enable all the wakeup source */ +#define LL_PWR_WAKEUP_PIN0 (uint32_t)(1U << 0U) /*!< Enable the wakeup source PIN0 */ +#define LL_PWR_WAKEUP_PIN1 (uint32_t)(1U << 1U) /*!< Enable the wakeup source PIN1 */ +#define LL_PWR_WAKEUP_PIN2 (uint32_t)(1U << 2U) /*!< Enable the wakeup source PIN2 */ +#define LL_PWR_WAKEUP_PIN3 (uint32_t)(1U << 3U) /*!< Enable the wakeup source PIN3 */ +#define LL_PWR_WAKEUP_PIN4 (uint32_t)(1U << 4U) /*!< Enable the wakeup source PIN4 */ +#define LL_PWR_WAKEUP_PIN5 (uint32_t)(1U << 5U) /*!< Enable the wakeup source PIN5 */ +#define LL_PWR_WAKEUP_PIN6 (uint32_t)(1U << 6U) /*!< Enable the wakeup source PIN6 */ +#define LL_PWR_WAKEUP_PIN7 (uint32_t)(1U << 7U) /*!< Enable the wakeup source PIN7 */ +#define LL_PWR_WAKEUP_PIN8 (uint32_t)(1U << 8U) /*!< Enable the wakeup source PIN8 */ +#define LL_PWR_WAKEUP_PIN9 (uint32_t)(1U << 9U) /*!< Enable the wakeup source PIN9 */ +#define LL_PWR_WAKEUP_PIN10 (uint32_t)(1U << 10U) /*!< Enable the wakeup source PIN10 */ +#define LL_PWR_WAKEUP_PIN11 (uint32_t)(1U << 11U) /*!< Enable the wakeup source PIN11 */ +#define LL_PWR_WAKEUP_PIN12 (uint32_t)(1U << 12U) /*!< Enable the wakeup source PIN12 */ +#define LL_PWR_WAKEUP_PIN13 (uint32_t)(1U << 13U) /*!< Enable the wakeup source PIN13 */ +#define LL_PWR_WAKEUP_PIN14 (uint32_t)(1U << 14U) /*!< Enable the wakeup source PIN14 */ +#define LL_PWR_WAKEUP_PIN15 (uint32_t)(1U << 15U) /*!< Enable the wakeup source PIN15 */ + +#define LL_PWR_WAKEUP_LPAWUR PWR_IEWU_EWLPAWUR /*!< Enable wakeup on LPAWUR RFIP event */ +#define LL_PWR_WAKEUP_SUBG PWR_IEWU_EWMRSUBG /*!< Enable wakeup on MRSUBG RFIP event */ +#define LL_PWR_WAKEUP_SUBGHOST PWR_IEWU_EWMRSUBGHCPU /*!< Enable wakeup on MRSUBG Host CPU event */ +#define LL_PWR_WAKEUP_LCSC PWR_IEWU_EIWL4 /*!< Enable wakeup on internal event (LCSC) */ +#define LL_PWR_WAKEUP_COMP PWR_IEWU_EIWL3 /*!< Enable wakeup on internal event (COMP) */ +#define LL_PWR_WAKEUP_LCD PWR_IEWU_EIWL2 /*!< Enable wakeup on internal event (LCD) */ +#define LL_PWR_WAKEUP_RTC PWR_IEWU_EIWL1 /*!< Enable wakeup on internal event (RTC) */ +#define LL_PWR_WAKEUP_LPUART PWR_IEWU_EIWL0 /*!< Enable wakeup on internal event (LPUART) */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines + * @brief + * @{ + */ +#define LL_PWR_FLAG_LPAWUR PWR_IWUF_WLPAWURF /*!< LPAWUR wakeup flag */ +#define LL_PWR_FLAG_MRSUBGHCPU PWR_IWUF_WMRSUBGHCPUF /*!< MRSUBG Host CPU wakeup flag */ +#define LL_PWR_FLAG_MRSUBG PWR_IWUF_WMRSUBGF /*!< MRSUBG wakeup flag */ +#define LL_PWR_FLAG_LCSC PWR_IWUF_IWUF4 /*!< Internal wakeup LCSC flag */ +#define LL_PWR_FLAG_COMP PWR_IWUF_IWUF3 /*!< Internal wakeup COMP flag */ +#define LL_PWR_FLAG_LCD PWR_IWUF_IWUF2 /*!< Internal wakeup LCD flag */ +#define LL_PWR_FLAG_RTC PWR_IWUF_IWUF1 /*!< Internal wakeup RTC flag */ +#define LL_PWR_FLAG_LPUART PWR_IWUF_IWUF0 /*!< Internal wakeup LPUART flag */ +#define LL_PWR_WUFA_WUF0 PWR_WUFA_WUF0 /*!< Wakeup flag on PA0 */ +#define LL_PWR_WUFA_WUF1 PWR_WUFA_WUF1 /*!< Wakeup flag on PA1 */ +#define LL_PWR_WUFA_WUF2 PWR_WUFA_WUF2 /*!< Wakeup flag on PA2 */ +#define LL_PWR_WUFA_WUF3 PWR_WUFA_WUF3 /*!< Wakeup flag on PA3 */ +#define LL_PWR_WUFA_WUF4 PWR_WUFA_WUF4 /*!< Wakeup flag on PA4 */ +#define LL_PWR_WUFA_WUF5 PWR_WUFA_WUF5 /*!< Wakeup flag on PA5 */ +#define LL_PWR_WUFA_WUF6 PWR_WUFA_WUF6 /*!< Wakeup flag on PA6 */ +#define LL_PWR_WUFA_WUF7 PWR_WUFA_WUF7 /*!< Wakeup flag on PA7 */ +#define LL_PWR_WUFA_WUF8 PWR_WUFA_WUF8 /*!< Wakeup flag on PA8 */ +#define LL_PWR_WUFA_WUF9 PWR_WUFA_WUF9 /*!< Wakeup flag on PA9 */ +#define LL_PWR_WUFA_WUF11 PWR_WUFA_WUF11 /*!< Wakeup flag on PA11 */ +#define LL_PWR_WUFA_WUF12 PWR_WUFA_WUF12 /*!< Wakeup flag on PA12 */ +#define LL_PWR_WUFA_WUF13 PWR_WUFA_WUF13 /*!< Wakeup flag on PA13 */ +#define LL_PWR_WUFA_WUF14 PWR_WUFA_WUF14 /*!< Wakeup flag on PA14 */ +#define LL_PWR_WUFA_WUF15 PWR_WUFA_WUF15 /*!< Wakeup flag on PA15 */ +#define LL_PWR_WUFB_WUF0 PWR_WUFB_WUF0 /*!< Wakeup flag on PB0 */ +#define LL_PWR_WUFB_WUF1 PWR_WUFB_WUF1 /*!< Wakeup flag on PB1 */ +#define LL_PWR_WUFB_WUF2 PWR_WUFB_WUF2 /*!< Wakeup flag on PB2 */ +#define LL_PWR_WUFB_WUF3 PWR_WUFB_WUF3 /*!< Wakeup flag on PB3 */ +#define LL_PWR_WUFB_WUF4 PWR_WUFB_WUF4 /*!< Wakeup flag on PB4 */ +#define LL_PWR_WUFB_WUF5 PWR_WUFB_WUF5 /*!< Wakeup flag on PB5 */ +#define LL_PWR_WUFB_WUF6 PWR_WUFB_WUF6 /*!< Wakeup flag on PB6 */ +#define LL_PWR_WUFB_WUF7 PWR_WUFB_WUF7 /*!< Wakeup flag on PB7 */ +#define LL_PWR_WUFB_WUF8 PWR_WUFB_WUF8 /*!< Wakeup flag on PB8 */ +#define LL_PWR_WUFB_WUF9 PWR_WUFB_WUF9 /*!< Wakeup flag on PB9 */ +#define LL_PWR_WUFB_WUF10 PWR_WUFB_WUF10 /*!< Wakeup flag on PB10 */ +#define LL_PWR_WUFB_WUF11 PWR_WUFB_WUF11 /*!< Wakeup flag on PB11 */ +#define LL_PWR_WUFB_WUF12 PWR_WUFB_WUF12 /*!< Wakeup flag on PB12 */ +#define LL_PWR_WUFB_WUF13 PWR_WUFB_WUF13 /*!< Wakeup flag on PB13 */ +#define LL_PWR_WUFB_WUF14 PWR_WUFB_WUF14 /*!< Wakeup flag on PB14 */ +#define LL_PWR_WUFB_WUF15 PWR_WUFB_WUF15 /*!< Wakeup flag on PB15 */ +#define LL_PWR_SR2_PVDO PWR_SR2_PVDO /*!< Power voltage Detector Output */ +#define LL_PWR_SR2_REGMS PWR_SR2_REGMS /*!< Main regulator ready status */ +#define LL_PWR_SR2_REGLPS PWR_SR2_REGLPS /*!< Low Power regulator ready status */ +#define LL_PWR_SR2_SMPSRDY PWR_SR2_SMPSRDY /*!< SMPS ready status */ +#define LL_PWR_SR2_SMPSENR PWR_SR2_SMPSENR /*!< SMPS RUN mode status */ +#define LL_PWR_SR2_SMPSBYPR PWR_SR2_SMPSBYPR /*!< SMPS PRECHARGE mode status */ + +/** + * @} + */ + +/** @defgroup PWR_LL_IO_PUD_CFG IOs PU/PD configuration + * @{ + */ +#define LL_PWR_GPIO_BIT_0 (uint32_t)(1U << 0U) /*!< GPIO port I/O pin 0 */ +#define LL_PWR_GPIO_BIT_1 (uint32_t)(1U << 1U) /*!< GPIO port I/O pin 1 */ +#define LL_PWR_GPIO_BIT_2 (uint32_t)(1U << 2U) /*!< GPIO port I/O pin 2 */ +#define LL_PWR_GPIO_BIT_3 (uint32_t)(1U << 3U) /*!< GPIO port I/O pin 3 */ +#define LL_PWR_GPIO_BIT_4 (uint32_t)(1U << 4U) /*!< GPIO port I/O pin 4 */ +#define LL_PWR_GPIO_BIT_5 (uint32_t)(1U << 5U) /*!< GPIO port I/O pin 5 */ +#define LL_PWR_GPIO_BIT_6 (uint32_t)(1U << 6U) /*!< GPIO port I/O pin 6 */ +#define LL_PWR_GPIO_BIT_7 (uint32_t)(1U << 7U) /*!< GPIO port I/O pin 7 */ +#define LL_PWR_GPIO_BIT_8 (uint32_t)(1U << 8U) /*!< GPIO port I/O pin 8 */ +#define LL_PWR_GPIO_BIT_9 (uint32_t)(1U << 9U) /*!< GPIO port I/O pin 9 */ +#define LL_PWR_GPIO_BIT_10 (uint32_t)(1U << 10U) /*!< GPIO port I/O pin 10 */ +#define LL_PWR_GPIO_BIT_11 (uint32_t)(1U << 11U) /*!< GPIO port I/O pin 11 */ +#define LL_PWR_GPIO_BIT_12 (uint32_t)(1U << 12U) /*!< GPIO port I/O pin 12 */ +#define LL_PWR_GPIO_BIT_13 (uint32_t)(1U << 13U) /*!< GPIO port I/O pin 13 */ +#define LL_PWR_GPIO_BIT_14 (uint32_t)(1U << 14U) /*!< GPIO port I/O pin 14 */ +#define LL_PWR_GPIO_BIT_15 (uint32_t)(1U << 15U) /*!< GPIO port I/O pin 15 */ +/** + * @} + */ + +/** @defgroup PWR_LL_EC_GPIO GPIO Port + * @{ + */ +#define LL_PWR_GPIO_A ((uint32_t)(&(PWR->PUCRA))) +#define LL_PWR_GPIO_B ((uint32_t)(&(PWR->PUCRB))) + +/** + * @} + */ + +/** @defgroup PWR_LL_WAKEUP_CFG IOs Wakeup configuration polarity + * @{ + */ +#define LL_PWR_WUP_RISIEDG (0x000000000U) /*!< Detection of wakeup event on rising edge. */ +#define LL_PWR_WUP_FALLEDG (0x000000001U) /*!< Detection of wakeup event on falling edge. */ +/** + * @} + */ + +/** @defgroup PWR_LL_IO_LATCH_BOOT I/Os value latched at POR. + * @{ + */ +#define LL_PWR_PA8_LATCH_POR PWR_SR2_IOBOOTVAL_0 /*!< PA8 input value latched at POR. */ +#define LL_PWR_PA9_LATCH_POR PWR_SR2_IOBOOTVAL_1 /*!< PA9 input value latched at POR. */ +#define LL_PWR_PA10_LATCH_POR PWR_SR2_IOBOOTVAL_2 /*!< PA10 input value latched at POR. */ +#define LL_PWR_PA11_LATCH_POR PWR_SR2_IOBOOTVAL_3 /*!< PA11 input value latched at POR. */ +#if defined(PWR_SR2_IOBOOTVAL2_0) +#define LL_PWR_PB12_LATCH_POR PWR_SR2_IOBOOTVAL2_0 /*!< PB12 input value latched at POR. */ +#endif /* PWR_SR2_IOBOOTVAL2_0 */ +#if defined(PWR_SR2_IOBOOTVAL2_1) +#define LL_PWR_PB13_LATCH_POR PWR_SR2_IOBOOTVAL2_1 /*!< PB13 input value latched at POR. */ +#endif /* PWR_SR2_IOBOOTVAL2_1 */ +#if defined(PWR_SR2_IOBOOTVAL2_2) +#define LL_PWR_PB14_LATCH_POR PWR_SR2_IOBOOTVAL2_2 /*!< PB14 input value latched at POR. */ +#endif /* PWR_SR2_IOBOOTVAL2_2 */ +#if defined(PWR_SR2_IOBOOTVAL2_3) +#define LL_PWR_PB15_LATCH_POR PWR_SR2_IOBOOTVAL2_3 /*!< PB15 input value latched at POR. */ +#endif /* PWR_SR2_IOBOOTVAL2_3 */ +/** + * @} + */ + +/** @defgroup PWR_LL_SMPS_MODE SMPS Mode + * @{ + */ +#define LL_PWR_SMPS (0x000000000U) /*!< SMPS is enabled */ +#define LL_PWR_NO_SMPS PWR_CR5_NOSMPS /*!< SMPS is disabled */ +/** + * @} + */ + +/** @defgroup PWR_LL_SMPS_PRECHARGE_MODE SMPS PRECHARGE Mode + * @{ + */ +#define LL_PWR_NO_SMPS_PRECHARGE (0x000000000U) /*!< SMPS not in pecharge mode */ +#define LL_PWR_SMPS_PRECHARGE PWR_CR5_SMPSFBYP /*!< SMPS is disabled and bypassed in precharge mode */ +/** + * @} + */ + +/** @defgroup PWR_LL_SMPS_BOF_MODE SMPS BOF Mode + * @{ + */ +#define LL_PWR_NO_SMPS_BOF (0x000000000U) /*!< SMPS BOF mode not enabled */ +#define LL_PWR_SMPS_BOF PWR_CR5_NOSMPSBOF /*!< SMPS BOF mode enable */ +/** + * @} + */ + +/** @defgroup PWR_LL_SMPS_BOF_STATIC_MODE SMPS BOF STATIC Mode + * @{ + */ +#define LL_PWR_NO_SMPS_BOF_STATIC (0x000000000U) /*!< SMPS BOF static mode not enabled */ +#define LL_PWR_SMPS_BOF_STATIC PWR_CR5_SMPS_BOF_STATIC /*!< SMPS BOF static mode enable */ +/** + * @} + */ + +/** @defgroup PWR_LL_SMPS_BOF_DYNAMIC_MODE SMPS BOF DYNAMIC Mode + * @{ + */ +#define LL_PWR_NO_SMPS_BOF_DYNAMIC (0x000000000U) /*!< SMPS BOF dynamic mode not enabled */ +#define LL_PWR_SMPS_BOF_DYNAMIC PWR_CR5_SMPS_BOF_DYN /*!< SMPS BOF dynamic mode enable */ +/** + * @} + */ + +/** @defgroup PWR_LL_SMPS_OPEN_MODE SMPS OPEN Mode during DEEPSTOP + * @{ + */ +#define LL_PWR_NO_SMPS_LPOPEN (0x000000000U) /*!< In DEEPSTOP, the SMPS is in PRECHARGE mode with output connected to VDDIO */ +#define LL_PWR_SMPS_LPOPEN PWR_CR5_SMPSLPOPEN /*!< In DEEPSTOP, the SMPS is disabled with floating output */ +/** + * @} + */ + +/** @defgroup PWR_LL_SMPS_BOM SMPS BOM + * @{ + */ +#define LL_PWR_SMPS_BOM1 (0x000000000U) +#define LL_PWR_SMPS_BOM2 PWR_CR5_SMPSBOMSEL_0 +#define LL_PWR_SMPS_BOM3 PWR_CR5_SMPSBOMSEL_1 +/** + * @} + */ + +/** @defgroup PWR_LL_SMPS_OUTLVL SMPS Output Level + * @{ + */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_1V20 (0x00000000U ) /*!< 0000: 1.20V (min VBAT = 1.95V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_1V30 (PWR_CR5_SMPSLVL_1|PWR_CR5_SMPSLVL_0 ) /*!< 0011: 1.30V (min VBAT = 1.95V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_1V40 (PWR_CR5_SMPSLVL_2) /*!< 0100: 1.40V (min VBAT = 1.95V) (default) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_1V50 (PWR_CR5_SMPSLVL_2|PWR_CR5_SMPSLVL_0) /*!< 0101: 1.50V (min VBAT = 1.95V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_1V60 (PWR_CR5_SMPSLVL_2|PWR_CR5_SMPSLVL_1) /*!< 0110: 1.60V (min VBAT = 1.95V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_1V70 (PWR_CR5_SMPSLVL_2|PWR_CR5_SMPSLVL_1|PWR_CR5_SMPSLVL_0) /*!< 0111: 1.70V (min VBAT = 2V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_1V80 (PWR_CR5_SMPSLVL_3) /*!< 1000: 1.80V (min VBAT = 2.1V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_1V90 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_0) /*!< 1001: 1.90V (min VBAT = 2.2V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_2V00 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_1) /*!< 1010: 2V (min VBAT = 2.3V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_2V10 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_1|PWR_CR5_SMPSLVL_0) /*!< 1011: 2.1V (min VBAT = 2.4V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_2V20 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_2) /*!< 1100: 2.2V (min VBAT = 2.5V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_2V30 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_2|PWR_CR5_SMPSLVL_0) /*!< 1101: 2.3V (min VBAT = 2.6V) */ +#define LL_PWR_SMPS_OUTPUT_VOLTAGE_2V40 (PWR_CR5_SMPSLVL_3|PWR_CR5_SMPSLVL_2|PWR_CR5_SMPSLVL_1|PWR_CR5_SMPSLVL_0) /*!< 1111: 2.4V (min VBAT = 2.7V) */ + +/** + * @} + */ + +#if defined(PWR_CR5_SMPS_PRECH_CUR_SEL) +/** @defgroup PWR_LL_SMPS_PRECHARGE_LIMIT_CURRENT Select SMPS PRECHARGE limit current + * @{ + */ +#define LL_PWR_SMPS_PRECH_LIMIT_CUR_2_5 (0x000000000U) +#define LL_PWR_SMPS_PRECH_LIMIT_CUR_5 (PWR_CR5_SMPS_PRECH_CUR_SEL_0) +#define LL_PWR_SMPS_PRECH_LIMIT_CUR_10 (PWR_CR5_SMPS_PRECH_CUR_SEL_1) +#define LL_PWR_SMPS_PRECH_LIMIT_CUR_20 (PWR_CR5_SMPS_PRECH_CUR_SEL_0|PWR_CR5_SMPS_PRECH_CUR_SEL_1) +/** + * @} + */ +#endif /* PWR_CR5_SMPS_PRECH_CUR_SEL */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros + * @{ + */ + +/** @defgroup PWR_LL_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in PWR register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__)) + +/** + * @brief Read a value in PWR register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @defgroup PWR_LL_Configuration Configuration Function + * @{ + */ + +/** + * @brief Enable automatic IBIAS control during RUN or DEEPSTOP mode. + * @rmtoll CR1 IBIAS_RUN_AUTO LL_PWR_EnableIBIASAuto + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableIBIASAuto(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_IBIAS_RUN_AUTO); +} + +/** + * @brief Disable automatic IBIAS control during RUN or DEEPSTOP mode. + * @rmtoll CR1 IBIAS_RUN_AUTO LL_PWR_DisableIBIASAuto + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableIBIASAuto(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_IBIAS_RUN_AUTO); +} + +/** + * @brief Checks if automatic IBIAS control during RUN or DEEPSTOP mode is enabled or disabled. + * @rmtoll CR1 IBIAS_RUN_AUTO LL_PWR_IsEnabledIBIASAuto + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledIBIASAuto(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_IBIAS_RUN_AUTO) == (PWR_CR1_IBIAS_RUN_AUTO)) ? 1UL : 0UL); +} + +/** + * @brief Enable IBIAS during RUN mode when automatic mode is disabled. + * @rmtoll CR1 IBIAS_RUN_STATE LL_PWR_EnableIBIASRun + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableIBIASRun(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_IBIAS_RUN_STATE); +} + +/** + * @brief Disable IBIAS during RUN mode when automatic mode is disabled. + * @rmtoll CR1 IBIAS_RUN_STATE LL_PWR_DisableIBIASRun + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableIBIASRun(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_IBIAS_RUN_STATE); +} + +/** + * @brief Checks if IBIAS is enabled or disabled, during RUN mode when automatic mode is disabled. + * @rmtoll CR1 IBIAS_RUN_STATE LL_PWR_IsEnabledIBIASRun + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledIBIASRun(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_IBIAS_RUN_STATE) == (PWR_CR1_IBIAS_RUN_STATE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the BOR reset supervising during SHUTDOWN mode. + * @rmtoll CR1 ENSDNBOR LL_PWR_EnableBORinSDN + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableBORinSDN(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_ENSDNBOR); +} + +/** + * @brief Disable the BOR reset supervising during SHUTDOWN mode. + * @rmtoll CR1 ENSDNBOR LL_PWR_DisableBORinSDN + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableBORinSDN(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_ENSDNBOR); +} + +/** + * @brief Checks if BOR is enabled or disabled during SHUTDOWN mode. + * @rmtoll CR1 ENSDNBOR LL_PWR_IsEnabledBORinSDN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledBORinSDN(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_ENSDNBOR) == (PWR_CR1_ENSDNBOR)) ? 1UL : 0UL); +} + +#if defined(PWR_SDWN_WUEN_WUEN) +/** + * @brief Shutdown I/O Wakeup enable. + * @rmtoll SDWN_WUEN WUEN LL_PWR_EnableIOWakeupSDN + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableIOWakeupSDN(void) +{ + SET_BIT(PWR->SDWN_WUEN, PWR_SDWN_WUEN_WUEN); +} + +/** + * @brief Shutdown I/O Wakeup disable. + * @rmtoll SDWN_WUEN WUEN LL_PWR_DisableIOWakeupSDN + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableIOWakeupSDN(void) +{ + CLEAR_BIT(PWR->SDWN_WUEN, PWR_SDWN_WUEN_WUEN); +} + +/** + * @brief Checks if Shutdown I/O Wakeup is enabled or disabled. + * @rmtoll SDWN_WUEN WUEN LL_PWR_IsEnabledIOWakeupSDN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledIOWakeupSDN(void) +{ + return ((READ_BIT(PWR->SDWN_WUEN, PWR_SDWN_WUEN_WUEN) == (PWR_SDWN_WUEN_WUEN)) ? 1UL : 0UL); +} + +/** + * @brief Shutdown I/O Wakeup Polarity configuration. + * @rmtoll SDWN_WUPOL WUPOL LL_PWR_IOWakeupPolaritySDN + * @param pol IO wakeup polarity. This parameter can be one of the following values: + * @arg @ref LL_PWR_WUP_RISIEDG + * @arg @ref LL_PWR_WUP_FALLEDG + * @retval None + * @note The wakeup from shutdown can happen on pulse or level detection + */ +__STATIC_INLINE void LL_PWR_IOWakeupPolaritySDN(uint8_t pol) +{ + MODIFY_REG_FIELD(PWR->SDWN_WUPOL, PWR_SDWN_WUPOL_WUPOL, pol); +} + +/** + * @brief Checks if Shutdown I/O Wakeup from PB0 pin occurred. + * @rmtoll SDWN_WUF WUF LL_PWR_IsIOWakeupSDN + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsIOWakeupSDN(void) +{ + return ((READ_BIT(PWR->SDWN_WUF, PWR_SDWN_WUF_WUF) == (PWR_SDWN_WUF_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Clear I/O Wakeup from PB0 pin occurred flag + * @rmtoll SDWN_WUF WUF LL_PWR_ClearIOWakeupFlagSDN + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearIOWakeupFlagSDN(void) +{ + CLEAR_BIT(PWR->SDWN_WUF, PWR_SDWN_WUF_WUF); +} +#endif /* PWR_SDWN_WUEN_WUEN */ + +/** + * @brief Select the low-power mode. + * @rmtoll CR1 LPMS LL_PWR_LowPowerMode + * @param LowPowerMode Low Power Mode Selection. This parameter can be one of the following values: + * @arg @ref LL_PWR_MODE_DEEPSTOP + * @arg @ref LL_PWR_MODE_SHUTDOWN + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t LowPowerMode) +{ + MODIFY_REG_FIELD(PWR->CR1, PWR_CR1_LPMS, LowPowerMode); +} + +/** + * @brief Get Low-Power mode + * @rmtoll CR1 LPMS LL_PWR_GetPowerMode + * @retval Returned value can be one of the following values: + * @arg @ref LL_PWR_MODE_DEEPSTOP + * @arg @ref LL_PWR_MODE_SHUTDOWN + */ + +__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPMS)); +} + +/** + * @brief Enabled the temperature sensor. + * @rmtoll CR2 ENTS LL_PWR_EnableTempSens + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableTempSens(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_ENTS); +} + +/** + * @brief Disable the temperature sensor. + * @rmtoll CR2 ENTS LL_PWR_DisableTempSens + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableTempSens(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_ENTS); +} + +/** + * @brief Checks if temperature sensor is enabled or disabled. + * @rmtoll CR2 ENTS LL_PWR_IsEnabledTempSens + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledTempSens(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_ENTS) == (PWR_CR2_ENTS)) ? 1UL : 0UL); +} + +/** + * @brief Enable the RAM bank retention. + * @rmtoll CR2 RAMRET1 LL_PWR_EnableRAMBankRet + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableRAMBankRet(void) +{ + SET_BIT(PWR->CR2, LL_PWR_RAMRET_1); +} + +/** + * @brief Disable the RAM bank retention. + * @rmtoll CR2 RAMRET1 LL_PWR_DisableRAMBankRet + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableRAMBankRet(void) +{ + CLEAR_BIT(PWR->CR2, LL_PWR_RAMRET_1); +} + +/** + * @brief Get the RAM banks retention selected. + * @rmtoll CR2 RAMRET1 LL_PWR_GetRAMBankRet + * @retval RAM bank selection. This parameter can be the following value: + * @arg @ref LL_PWR_RAMRET_1 + */ +__STATIC_INLINE uint32_t LL_PWR_GetRAMBankRet(void) +{ + return (READ_BIT(PWR->CR2, PWR_CR2_RAMRET1) ? 1UL : 0UL); +} + +/** + * @brief Enable the PVD (Programmable Voltage Detector). + * @rmtoll CR2 PVDE LL_PWR_EnablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePVD(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Disable the PVD (Programmable Voltage Detector). + * @rmtoll CR2 PVDE LL_PWR_DisablePVD + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePVD(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Checks if PVD is enabled or disabled. + * @rmtoll CR2 PVDE LL_PWR_IsEnabledPVD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_PVDE) == (PWR_CR2_PVDE)) ? 1UL : 0UL); +} + +/** + * @brief Set PVD voltage level. + * @rmtoll CR2 PVDLS LL_PWR_SetPVDLevel + * @param PVDLevel PVD voltage level selection. This parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel) +{ + MODIFY_REG(PWR->CR2, PWR_CR2_PVDLS, PVDLevel); +} + +/** + * @brief Get PVD voltage level. + * @rmtoll CR2 PVDLS LL_PWR_GetPVDLevel + * @retval PVD voltage level selection. The parameter can be one of the following values: + * @arg @ref LL_PWR_PVDLEVEL_0 + * @arg @ref LL_PWR_PVDLEVEL_1 + * @arg @ref LL_PWR_PVDLEVEL_2 + * @arg @ref LL_PWR_PVDLEVEL_3 + * @arg @ref LL_PWR_PVDLEVEL_4 + * @arg @ref LL_PWR_PVDLEVEL_5 + * @arg @ref LL_PWR_PVDLEVEL_6 + * @arg @ref LL_PWR_PVDLEVEL_7 + */ +__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR2, PWR_CR2_PVDLS)); +} + +/** + * @brief Enable IO Wakeup Source to get out of DEEPSTOP mode. + * @rmtoll EWUA LL_PWR_EnableWakeUpPin + * EWUB LL_PWR_EnableWakeUpPin + * @param Port IO port to get out of DEEPSTOP mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PORTA + * @arg @ref LL_PWR_WAKEUP_PORTB + * @param WakeUpPin Enable the wakeup sources. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN0 + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @arg @ref LL_PWR_WAKEUP_PIN7 + * @arg @ref LL_PWR_WAKEUP_PIN8 + * @arg @ref LL_PWR_WAKEUP_PIN9 + * @arg @ref LL_PWR_WAKEUP_PIN10 + * @arg @ref LL_PWR_WAKEUP_PIN11 + * @arg @ref LL_PWR_WAKEUP_PIN12 + * @arg @ref LL_PWR_WAKEUP_PIN13 + * @arg @ref LL_PWR_WAKEUP_PIN14 + * @arg @ref LL_PWR_WAKEUP_PIN15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t Port, uint32_t WakeUpPin) +{ + if (Port == LL_PWR_WAKEUP_PORTA) + { + SET_BIT(PWR->EWUA, (WakeUpPin & 0x0000FFFF)); + } + else + { + SET_BIT(PWR->EWUB, (WakeUpPin & 0x0000FFFF)); + } +} + +/** + * @brief Disable IO Wakeup Source to get out of DEEPSTOP mode. + * @rmtoll EWUA LL_PWR_DisableWakeUpPin + * EWUB LL_PWR_DisableWakeUpPin + * @param Port IO port to get out of DEEPSTOP mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PORTA + * @arg @ref LL_PWR_WAKEUP_PORTB + * @param WakeUpPin Disable the wakeup sources. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN0 + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @arg @ref LL_PWR_WAKEUP_PIN7 + * @arg @ref LL_PWR_WAKEUP_PIN8 + * @arg @ref LL_PWR_WAKEUP_PIN9 + * @arg @ref LL_PWR_WAKEUP_PIN10 + * @arg @ref LL_PWR_WAKEUP_PIN11 + * @arg @ref LL_PWR_WAKEUP_PIN12 + * @arg @ref LL_PWR_WAKEUP_PIN13 + * @arg @ref LL_PWR_WAKEUP_PIN14 + * @arg @ref LL_PWR_WAKEUP_PIN15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t Port, uint32_t WakeUpPin) +{ + if (Port == LL_PWR_WAKEUP_PORTA) + { + CLEAR_BIT(PWR->EWUA, (WakeUpPin & 0x0000FFFF)); + } + else + { + CLEAR_BIT(PWR->EWUB, (WakeUpPin & 0x0000FFFF)); + } +} + +/** + * @brief Check if the WakeUp PINx functionality is enabled + * @rmtoll EWUA/EWUB LL_PWR_IsEnabledWakeUpPin + * @param Port IO port to get out of DEEPSTOP mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PORTA + * @arg @ref LL_PWR_WAKEUP_PORTB + * @param WakeUpPin Wakeup sources enabled. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN0 + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @arg @ref LL_PWR_WAKEUP_PIN7 + * @arg @ref LL_PWR_WAKEUP_PIN8 + * @arg @ref LL_PWR_WAKEUP_PIN9 + * @arg @ref LL_PWR_WAKEUP_PIN10 + * @arg @ref LL_PWR_WAKEUP_PIN11 + * @arg @ref LL_PWR_WAKEUP_PIN12 + * @arg @ref LL_PWR_WAKEUP_PIN13 + * @arg @ref LL_PWR_WAKEUP_PIN14 + * @arg @ref LL_PWR_WAKEUP_PIN15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t Port, uint32_t WakeUpPin) +{ + if (Port == LL_PWR_WAKEUP_PORTA) + { + return ((READ_BIT(PWR->EWUA, (WakeUpPin & 0x0000FFFF)) == (WakeUpPin & 0x0000FFFF)) ? 1UL : 0UL); + } + else + { + return ((READ_BIT(PWR->EWUB, (WakeUpPin & 0x0000FFFF)) == (WakeUpPin & 0x0000FFFF)) ? 1UL : 0UL); + } +} + +/** + * @brief Set the Wake-Up pin polarity low for the event detection. + * @rmtoll WUPA/WUPB LL_PWR_SetWakeUpPinPolarityLow + * @param Port IO port to get out of DEEPSTOP mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PORTA + * @arg @ref LL_PWR_WAKEUP_PORTB + * @param WakeUpPin wakeup sources to configure. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN0 + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @arg @ref LL_PWR_WAKEUP_PIN7 + * @arg @ref LL_PWR_WAKEUP_PIN8 + * @arg @ref LL_PWR_WAKEUP_PIN9 + * @arg @ref LL_PWR_WAKEUP_PIN10 + * @arg @ref LL_PWR_WAKEUP_PIN11 + * @arg @ref LL_PWR_WAKEUP_PIN12 + * @arg @ref LL_PWR_WAKEUP_PIN13 + * @arg @ref LL_PWR_WAKEUP_PIN14 + * @arg @ref LL_PWR_WAKEUP_PIN15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t Port, uint32_t WakeUpPin) +{ + if (Port == LL_PWR_WAKEUP_PORTA) + { + SET_BIT(PWR->WUPA, (WakeUpPin & 0x0000FFFF)); + } + else + { + SET_BIT(PWR->WUPB, (WakeUpPin & 0x0000FFFF)); + } +} + +/** + * @brief Set the polarity for the I/Os wakeup sources. + * @rmtoll WUPA/WUPB LL_PWR_SetWakeUpPinPolarityHigh + * @param Port IO port to get out of DEEPSTOP mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PORTA + * @arg @ref LL_PWR_WAKEUP_PORTB + * @param WakeUpPin IO to configure. This parameter can be a + * combination of the following values @arg @ref PWR_LL_WAKEUP_SOURCE + * @retval None + * @note Please refer the user manual to know which wakeup source are able for this + * feature. + */ +__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t Port, uint32_t WakeUpPin) +{ + if (Port == LL_PWR_WAKEUP_PORTA) + { + CLEAR_BIT(PWR->WUPA, (WakeUpPin & 0x0000FFFF)); + } + else + { + CLEAR_BIT(PWR->WUPB, (WakeUpPin & 0x0000FFFF)); + } +} + +/** + * @brief Get the polarity for the I/Os wakeup sources. + * @rmtoll WUPA/WUPB LL_PWR_IsWakeUpPinPolarity + * @param Port IO port to get out of DEEPSTOP mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PORTA + * @arg @ref LL_PWR_WAKEUP_PORTB + * @param WakeUpPin IO wakeup sources configured. This parameter can be a one of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN0 + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @arg @ref LL_PWR_WAKEUP_PIN7 + * @arg @ref LL_PWR_WAKEUP_PIN8 + * @arg @ref LL_PWR_WAKEUP_PIN9 + * @arg @ref LL_PWR_WAKEUP_PIN10 + * @arg @ref LL_PWR_WAKEUP_PIN11 + * @arg @ref LL_PWR_WAKEUP_PIN12 + * @arg @ref LL_PWR_WAKEUP_PIN13 + * @arg @ref LL_PWR_WAKEUP_PIN14 + * @arg @ref LL_PWR_WAKEUP_PIN15 + * @retval The IO polarity to configure. This parameter can be one of the following values: + * @arg @ref LL_PWR_WUP_RISIEDG + * @arg @ref LL_PWR_WUP_FALLEDG + */ +__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarity(uint32_t Port, uint32_t WakeUpPin) +{ + if (Port == LL_PWR_WAKEUP_PORTA) + { + return (uint32_t)((READ_BIT(PWR->WUPA, (WakeUpPin & 0x0000FFFF))) ? 1UL : 0UL); + } + else + { + return (uint32_t)((READ_BIT(PWR->WUPB, (WakeUpPin & 0x0000FFFF))) ? 1UL : 0UL); + } +} + +/** + * @brief Get which IO source woken up the device after a DEEPSTOP. + * @rmtoll WUFA/WUFB LL_PWR_GetIOWakeupSource + * @param Port IO port to get out of DEEPSTOP mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PORTA + * @arg @ref LL_PWR_WAKEUP_PORTB + * @retval Wakeup IO Source from DEEPSTOP. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_WAKEUP_PIN0 + * @arg @ref LL_PWR_WAKEUP_PIN1 + * @arg @ref LL_PWR_WAKEUP_PIN2 + * @arg @ref LL_PWR_WAKEUP_PIN3 + * @arg @ref LL_PWR_WAKEUP_PIN4 + * @arg @ref LL_PWR_WAKEUP_PIN5 + * @arg @ref LL_PWR_WAKEUP_PIN6 + * @arg @ref LL_PWR_WAKEUP_PIN7 + * @arg @ref LL_PWR_WAKEUP_PIN8 + * @arg @ref LL_PWR_WAKEUP_PIN9 + * @arg @ref LL_PWR_WAKEUP_PIN10 + * @arg @ref LL_PWR_WAKEUP_PIN11 + * @arg @ref LL_PWR_WAKEUP_PIN12 + * @arg @ref LL_PWR_WAKEUP_PIN13 + * @arg @ref LL_PWR_WAKEUP_PIN14 + * @arg @ref LL_PWR_WAKEUP_PIN15 + */ +__STATIC_INLINE uint32_t LL_PWR_GetWakeupSource(uint32_t Port) +{ + if (Port == LL_PWR_WAKEUP_PORTA) + { + return (uint32_t)(READ_REG(PWR->WUFA) & 0x0000FFFF); + } + else + { + return (uint32_t)(READ_REG(PWR->WUFB) & 0x0000FFFF); + } +} + +/** + * @brief Clear the source that woken up the device after a DEEPSTOP. + * @rmtoll WUFA/WUFB LL_PWR_ClearWakeupSource + * @param Port IO port to get out of DEEPSTOP mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_WAKEUP_PORTA + * @arg @ref LL_PWR_WAKEUP_PORTB + * @param WakeUpPin Wakeup IO Source from DEEPSTOP. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_WUFA_WUF0 + * @arg @ref LL_PWR_WUFA_WUF1 + * @arg @ref LL_PWR_WUFA_WUF2 + * @arg @ref LL_PWR_WUFA_WUF3 + * @arg @ref LL_PWR_WUFA_WUF4 + * @arg @ref LL_PWR_WUFA_WUF5 + * @arg @ref LL_PWR_WUFA_WUF6 + * @arg @ref LL_PWR_WUFA_WUF7 + * @arg @ref LL_PWR_WUFA_WUF8 + * @arg @ref LL_PWR_WUFA_WUF9 + * @arg @ref LL_PWR_WUFA_WUF11 + * @arg @ref LL_PWR_WUFA_WUF12 + * @arg @ref LL_PWR_WUFA_WUF13 + * @arg @ref LL_PWR_WUFA_WUF14 + * @arg @ref LL_PWR_WUFA_WUF15 + * @arg @ref LL_PWR_WUFB_WUF0 + * @arg @ref LL_PWR_WUFB_WUF1 + * @arg @ref LL_PWR_WUFB_WUF2 + * @arg @ref LL_PWR_WUFB_WUF3 + * @arg @ref LL_PWR_WUFB_WUF4 + * @arg @ref LL_PWR_WUFB_WUF5 + * @arg @ref LL_PWR_WUFB_WUF6 + * @arg @ref LL_PWR_WUFB_WUF7 + * @arg @ref LL_PWR_WUFB_WUF8 + * @arg @ref LL_PWR_WUFB_WUF9 + * @arg @ref LL_PWR_WUFB_WUF10 + * @arg @ref LL_PWR_WUFB_WUF11 + * @arg @ref LL_PWR_WUFB_WUF12 + * @arg @ref LL_PWR_WUFB_WUF14 + * @arg @ref LL_PWR_WUFB_WUF15 + */ +__STATIC_INLINE void LL_PWR_ClearWakeupSource(uint32_t Port, uint32_t WakeUpPin) +{ + if (Port == LL_PWR_WAKEUP_PORTA) + { + WRITE_REG(PWR->WUFA, (WakeUpPin & 0x0000FFFF)); + } + else + { + WRITE_REG(PWR->WUFB, (WakeUpPin & 0x0000FFFF)); + } +} + +/** + * @brief Enable Internal Wakeup Source to get out of DEEPSTOP mode. + * @rmtoll IEWU LL_PWR_EnableInternWU + * @param WakeUpSource Enable the internal wakeup sources. + * This parameter can be a combination of the following values: + * @arg @ref LL_PWR_WAKEUP_LPAWUR + * @arg @ref LL_PWR_WAKEUP_SUBG + * @arg @ref LL_PWR_WAKEUP_SUBGHOST + * @arg @ref LL_PWR_WAKEUP_LCSC + * @arg @ref LL_PWR_WAKEUP_COMP + * @arg @ref LL_PWR_WAKEUP_LCD + * @arg @ref LL_PWR_WAKEUP_RTC + * @arg @ref LL_PWR_WAKEUP_LPUART + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableInternWU(uint32_t WakeUpSource) +{ + SET_BIT(PWR->IEWU, (WakeUpSource & 0x0000FFFF)); +} + +/** + * @brief Disable Internal Wakeup Source to get out of DEEPSTOP mode. + * @rmtoll IEWU LL_PWR_DisableInternWU + * @param WakeUpSource Disable the internal wakeup sources. + * This parameter can be a combination of the following values: + * @arg @ref LL_PWR_WAKEUP_LPAWUR + * @arg @ref LL_PWR_WAKEUP_SUBG + * @arg @ref LL_PWR_WAKEUP_SUBGHOST + * @arg @ref LL_PWR_WAKEUP_LCSC + * @arg @ref LL_PWR_WAKEUP_COMP + * @arg @ref LL_PWR_WAKEUP_LCD + * @arg @ref LL_PWR_WAKEUP_RTC + * @arg @ref LL_PWR_WAKEUP_LPUART + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableInternWU(uint32_t WakeUpSource) +{ + CLEAR_BIT(PWR->IEWU, (WakeUpSource & 0x0000FFFF)); +} + +/** + * @brief Is Internal Wakeup Source enabled. + * @rmtoll IEWU LL_PWR_IsEnabledInternWU + * @param WakeUpSource Wakeup sources enabled. This parameter can be a one the following values: + * @arg @ref LL_PWR_WAKEUP_LPAWUR + * @arg @ref LL_PWR_WAKEUP_SUBG + * @arg @ref LL_PWR_WAKEUP_SUBGHOST + * @arg @ref LL_PWR_WAKEUP_LCSC + * @arg @ref LL_PWR_WAKEUP_COMP + * @arg @ref LL_PWR_WAKEUP_LCD + * @arg @ref LL_PWR_WAKEUP_RTC + * @arg @ref LL_PWR_WAKEUP_LPUART + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledInternWU(uint32_t WakeUpSource) +{ + return ((READ_BIT(PWR->IEWU, (WakeUpSource & 0x0000FFFF)) == (WakeUpSource & 0x0000FFFF)) ? 1UL : 0UL); +} + +/** + * @brief Set the Polarity for the Internal wakeup sources. + * @rmtoll IWUP LL_PWR_SetWakeupInternalPolarity + * @param WakeUpSource Internal wakeup sources to configure. + * This parameter can be a combination of the following values: + * @arg @ref LL_PWR_WAKEUP_LPAWUR + * @arg @ref LL_PWR_WAKEUP_SUBG + * @arg @ref LL_PWR_WAKEUP_SUBGHOST + * @arg @ref LL_PWR_WAKEUP_LCSC + * @arg @ref LL_PWR_WAKEUP_COMP + * @arg @ref LL_PWR_WAKEUP_LCD + * @arg @ref LL_PWR_WAKEUP_RTC + * @arg @ref LL_PWR_WAKEUP_LPUART + * @param Polarity Internal polarity to configure. This parameter can be one of the following values: + * @arg @ref LL_PWR_WUP_RISIEDG + * @arg @ref LL_PWR_WUP_FALLEDG + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetWakeupInternalPolarity(uint32_t WakeUpSource, uint32_t Polarity) +{ + if (Polarity == LL_PWR_WUP_FALLEDG) + { + SET_BIT(PWR->IWUP, (WakeUpSource & 0x0000FFFF)); + } + else + { + CLEAR_BIT(PWR->IWUP, (WakeUpSource & 0x0000FFFF)); + } +} + +/** + * @brief Get the polarity for the Internal wakeup sources. + * @rmtoll IWUP LL_PWR_GetWakeupInternalPolarity + * @param WakeUpSource Internal wakeup sources configured. This parameter can be a one of the following values: + * @arg @ref LL_PWR_WAKEUP_LPAWUR + * @arg @ref LL_PWR_WAKEUP_SUBG + * @arg @ref LL_PWR_WAKEUP_SUBGHOST + * @arg @ref LL_PWR_WAKEUP_LCSC + * @arg @ref LL_PWR_WAKEUP_COMP + * @arg @ref LL_PWR_WAKEUP_LCD + * @arg @ref LL_PWR_WAKEUP_RTC + * @arg @ref LL_PWR_WAKEUP_LPUART + * @retval The Internal polarity configured. This parameter can be one of the following values: + * @arg @ref LL_PWR_WUP_RISIEDG + * @arg @ref LL_PWR_WUP_FALLEDG + */ +__STATIC_INLINE uint32_t LL_PWR_GetWakeupInternalPolarity(uint32_t WakeUpSource) +{ + return (uint32_t)((READ_BIT(PWR->IWUP, (WakeUpSource & 0x0000FFFF))) ? 1UL : 0UL); +} + +/** + * @brief Get which Internal source woken up the device after a DEEPSTOP. + * @rmtoll IWUF LL_PWR_GetInternalWakeupSource + * @retval Internal Wakeup Source from DEEPSTOP. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_FLAG_LPAWUR + * @arg @ref LL_PWR_FLAG_MRSUBGHCPU + * @arg @ref LL_PWR_FLAG_MRSUBG + * @arg @ref LL_PWR_FLAG_LCSC + * @arg @ref LL_PWR_FLAG_COMP + * @arg @ref LL_PWR_FLAG_LCD + * @arg @ref LL_PWR_FLAG_RTC + * @arg @ref LL_PWR_FLAG_LPUART + */ +__STATIC_INLINE uint32_t LL_PWR_GetInternalWakeupSource(void) +{ + return (uint32_t)(READ_REG(PWR->IWUF) & 0x0000FFFF); +} + +/** + * @brief Clear the Internal source that woken up the device after a DEEPSTOP. + * @rmtoll IWUF LL_PWR_ClearInternalWakeupSource + * @param WakeUpSource Internal Wakeup Source from DEEPSTOP. + * This parameter can be a combination of the following values: + * @arg @ref LL_PWR_FLAG_LPAWUR + * @arg @ref LL_PWR_FLAG_MRSUBGHCPU + * @arg @ref LL_PWR_FLAG_MRSUBG + * @arg @ref LL_PWR_FLAG_LCSC + * @arg @ref LL_PWR_FLAG_COMP + * @arg @ref LL_PWR_FLAG_LCD + * @arg @ref LL_PWR_FLAG_RTC + * @arg @ref LL_PWR_FLAG_LPUART + */ +__STATIC_INLINE void LL_PWR_ClearInternalWakeupSource(uint32_t WakeUpSource) +{ + WRITE_REG(PWR->IWUF, (WakeUpSource & 0x0000FFFF)); +} + +/** + * @brief Get LPUART Flag + * @rmtoll IWUF IWUF0 LL_PWR_IsActiveFlag_LPUART + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_LPUART(void) +{ + return ((READ_BIT(PWR->IWUF, PWR_IWUF_IWUF0) == (PWR_IWUF_IWUF0)) ? 1UL : 0UL); +} + +/** + * @brief Get RTC Flag + * @rmtoll IWUF IWUF1 LL_PWR_IsActiveFlag_RTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_RTC(void) +{ + return ((READ_BIT(PWR->IWUF, PWR_IWUF_IWUF1) == (PWR_IWUF_IWUF1)) ? 1UL : 0UL); +} + +/** + * @brief Get LCD Flag + * @rmtoll IWUF IWUF2 LL_PWR_IsActiveFlag_LCD + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_LCD(void) +{ + return ((READ_BIT(PWR->IWUF, PWR_IWUF_IWUF2) == (PWR_IWUF_IWUF2)) ? 1UL : 0UL); +} + +/** + * @brief Get COMP Flag + * @rmtoll IWUF IWUF3 LL_PWR_IsActiveFlag_COMP + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_COMP(void) +{ + return ((READ_BIT(PWR->IWUF, PWR_IWUF_IWUF3) == (PWR_IWUF_IWUF3)) ? 1UL : 0UL); +} + +/** + * @brief Get LCSC Flag + * @rmtoll IWUF IWUF4 LL_PWR_IsActiveFlag_LCSC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_LCSC(void) +{ + return ((READ_BIT(PWR->IWUF, PWR_IWUF_IWUF4) == (PWR_IWUF_IWUF4)) ? 1UL : 0UL); +} + +/** + * @brief Get MRSUBG Flag + * @rmtoll IWUF WMRSUBGF LL_PWR_IsActiveFlag_MRSUBG + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_MRSUBG(void) +{ + return ((READ_BIT(PWR->IWUF, PWR_IWUF_WMRSUBGF) == (PWR_IWUF_WMRSUBGF)) ? 1UL : 0UL); +} + +/** + * @brief Get MRSUBG Host CPU Flag + * @rmtoll IWUF WMRSUBGHCPUF LL_PWR_IsActiveFlag_WMRSUBGHCPU + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_MRSUBGHCPU(void) +{ + return ((READ_BIT(PWR->IWUF, PWR_IWUF_WMRSUBGHCPUF) == (PWR_IWUF_WMRSUBGHCPUF)) ? 1UL : 0UL); +} + +/** + * @brief Get LPAWUR Flag + * @rmtoll IWUF WLPAWURF LL_PWR_IsActiveFlag_LPAWUR + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_LPAWUR(void) +{ + return ((READ_BIT(PWR->IWUF, PWR_IWUF_WLPAWURF) == (PWR_IWUF_WLPAWURF)) ? 1UL : 0UL); +} + +/** + * @brief Get IO BOOT value. + * @rmtoll SR2 LL_PWR_GetIOBootVal + * @param IO This parameter can be one of the following values: + * @arg @ref LL_PWR_PA8_LATCH_POR + * @arg @ref LL_PWR_PA9_LATCH_POR + * @arg @ref LL_PWR_PA10_LATCH_POR + * @arg @ref LL_PWR_PA11_LATCH_POR + * @arg @ref LL_PWR_PB12_LATCH_POR + * @arg @ref LL_PWR_PB13_LATCH_POR + * @arg @ref LL_PWR_PB14_LATCH_POR + * @arg @ref LL_PWR_PB15_LATCH_POR + * @retval State of pin (1 or 0). + * @note Please refer the user manual to know which IOs are able for this + * feature. + */ +__STATIC_INLINE uint32_t LL_PWR_GetIOBootVal(uint32_t IO) +{ + return ((READ_BIT(PWR->SR2, IO) == (IO)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether VDD voltage is below or above the selected PVD threshold + * @rmtoll SR2 PVDO LL_PWR_IsActiveFlag_PVDO + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_PVDO) == (PWR_SR2_PVDO)) ? 1UL : 0UL); +} + +/** + * @brief Get the Main Regulator ready status. + * @rmtoll SR2 REGMS LL_PWR_IsActiveFlag_REGMS + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGMS(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_REGMS) == (PWR_SR2_REGMS)) ? 1UL : 0UL); +} + +/** + * @brief Get the Low Power Regulator ready status. + * @rmtoll SR2 REGLPS LL_PWR_IsActiveFlag_REGLPS + * @retval State of Low Power Regulator (1=ready or 0=not ready). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPS(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_REGLPS) == (PWR_SR2_REGLPS)) ? 1UL : 0UL); +} + +/** + * @brief Get the SMPS ready status. + * @rmtoll SR2 PWR_SR2_SMPSRDY LL_PWR_IsSMPSReady + * @retval State of SMPS (1=ready or 0=not ready). + */ +__STATIC_INLINE uint32_t LL_PWR_IsSMPSReady(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_SMPSRDY) == (PWR_SR2_SMPSRDY)) ? 1UL : 0UL); +} + +/** + * @brief Get the SMPS RUN mode status. + * @rmtoll SR2 PWR_SR2_SMPSENR LL_PWR_IsSMPSinRUNMode + * @retval SMPS RUN mode status (1=SMPS in RUN mode or 0=in PRECHARGE or NOSMPS mode). + */ +__STATIC_INLINE uint32_t LL_PWR_IsSMPSinRUNMode(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_SMPSENR) == (PWR_SR2_SMPSENR)) ? 1UL : 0UL); +} + +/** + * @brief Get the SMPS PRECHARGE mode status. + * @rmtoll SR2 PWR_SR2_SMPSBYPR LL_PWR_IsSMPSinPRECHARGEMode + * @retval SMPS PRECHARGE mode status (1=SMPS regulator is in PRECHARGE mode or 0=NOT in PRECHARGE). + */ +__STATIC_INLINE uint32_t LL_PWR_IsSMPSinPRECHARGEMode(void) +{ + return ((READ_BIT(PWR->SR2, PWR_SR2_SMPSBYPR) == (PWR_SR2_SMPSBYPR)) ? 1UL : 0UL); +} + +/** + * @brief Set SMPS Mode. + * @rmtoll CR5 PWR_CR5_NOSMPS LL_PWR_SetSMPSMode + * @param Mode SMPS Mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_SMPS + * @arg @ref LL_PWR_NO_SMPS + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetSMPSMode(uint32_t Mode) +{ + MODIFY_REG(PWR->CR5, PWR_CR5_NOSMPS, Mode); +} + +/** + * @brief Get SMPS Mode. + * @rmtoll CR5 PWR_CR5_NOSMPS LL_PWR_GetSMPSMode + * @retval SMPS Mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_SMPS + * @arg @ref LL_PWR_NO_SMPS + */ +__STATIC_INLINE uint32_t LL_PWR_GetSMPSMode(void) +{ + return (uint32_t)(READ_BIT(PWR->CR5, PWR_CR5_NOSMPS)); +} + +/** + * @brief Set SMPS in PRECHARGE Mode. + * @rmtoll CR5 PWR_CR5_SMPSFBYP LL_PWR_SetSMPSPrechargeMode + * @param Mode SMPS in Precharge Mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_NO_SMPS_PRECHARGE + * @arg @ref LL_PWR_SMPS_PRECHARGE + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetSMPSPrechargeMode(uint32_t Mode) +{ + MODIFY_REG(PWR->CR5, PWR_CR5_SMPSFBYP, Mode); +} + +/** + * @brief Check if SMPS is configured in PRECHARGE Mode. + * @rmtoll CR5 PWR_CR5_SMPSFBYP LL_PWR_IsEnabledSMPSPrechargeMode + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSMPSPrechargeMode(void) +{ + return ((READ_BIT(PWR->CR5, PWR_CR5_SMPSFBYP) == (PWR_CR5_SMPSFBYP)) ? 1UL : 0UL); +} + +/** + * @brief Enable SMPS BOF (Bypass On the Fly). + * @rmtoll CR5 PWR_CR5_NOSMPSBOF LL_PWR_EnableSMPSBOF + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSMPSBOF(void) +{ + SET_BIT(PWR->CR5, PWR_CR5_NOSMPS_BOF); +} + +/** + * @brief Disable SMPS BOF (Bypass On the Fly). + * @rmtoll CR5 PWR_CR5_NOSMPSBOF LL_PWR_DisableSMPSBOF + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSMPSBOF(void) +{ + CLEAR_BIT(PWR->CR5, PWR_CR5_NOSMPS_BOF); +} + +/** + * @brief Check if SMPS BOF (Bypass On the Fly) is enabled or not. + * @rmtoll CR5 PWR_CR5_NOSMPSBOF LL_PWR_IsEnabledSMPSBOF + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSMPSBOF(void) +{ + return ((READ_BIT(PWR->CR5, PWR_CR5_NOSMPS_BOF) == (PWR_CR5_NOSMPS_BOF)) ? 1UL : 0UL); +} + +/** + * @brief Enable SMPS BOF Static. + * @rmtoll CR5 PWR_CR5_SMPS_BOF_STATIC LL_PWR_EnableSMPSBOFStatic + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSMPSBOFStatic(void) +{ + SET_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_STATIC); +} + +/** + * @brief Disable SMPS BOF Static. + * @rmtoll CR5 PWR_CR5_SMPS_BOF_STATIC LL_PWR_DisableSMPSBOFStatic + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSMPSBOFStatic(void) +{ + CLEAR_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_STATIC); +} + +/** + * @brief Check if SMPS BOF Static is enabled or not. + * @rmtoll CR5 PWR_CR5_SMPS_BOF_STATIC LL_PWR_IsEnabledSMPSBOFStatic + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSMPSBOFStatic(void) +{ + return ((READ_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_STATIC) == (PWR_CR5_SMPS_BOF_STATIC)) ? 1UL : 0UL); +} + +/** + * @brief Enable SMPS BOF Dynamic. + * @rmtoll CR5 PWR_CR5_SMPS_BOF_DYN LL_PWR_EnableSMPSBOFDynamic + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSMPSBOFDynamic(void) +{ + SET_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_DYN); +} + +/** + * @brief Disable SMPS BOF Dynamic. + * @rmtoll CR5 PWR_CR5_SMPS_BOF_DYN LL_PWR_DisableSMPSBOFDynamic + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSMPSBOFDynamic(void) +{ + CLEAR_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_DYN); +} + +/** + * @brief Check if SMPS BOF Dynamic is enabled or not. + * @rmtoll CR5 PWR_CR5_SMPS_BOF_DYN LL_PWR_IsEnabledSMPSBOFDynamic + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSMPSBOFDynamic(void) +{ + return ((READ_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_DYN) == (PWR_CR5_SMPS_BOF_DYN)) ? 1UL : 0UL); +} + +/** + * @brief Set SMPS OPEN Mode during DEEPSTOP. + * @rmtoll CR5 PWR_CR5_NOSMPS LL_PWR_SetSMPSOpenMode + * @param Mode SMPS Mode. This parameter can be one of the following values: + * @arg @ref LL_PWR_NO_SMPS_LPOPEN + * @arg @ref LL_PWR_SMPS_LPOPEN + */ +__STATIC_INLINE void LL_PWR_SetSMPSOpenMode(uint32_t Mode) +{ + MODIFY_REG(PWR->CR5, PWR_CR5_SMPSLPOPEN, Mode); +} + +/** + * @brief Set SMPS BOM + * @rmtoll CR5 PWR_CR5_SMPSBOMSEL_0/PWR_CR5_SMPSBOMSEL_1 LL_PWR_SetSMPSBOM + * @param BOM BOM. This parameter can be one of the following values: + * @arg @ref LL_PWR_SMPS_BOM1 + * @arg @ref LL_PWR_SMPS_BOM2 + * @arg @ref LL_PWR_SMPS_BOM3 + */ +__STATIC_INLINE void LL_PWR_SetSMPSBOM(uint32_t BOM) +{ + MODIFY_REG(PWR->CR5, PWR_CR5_SMPSBOMSEL, BOM); +} + +/** + * @brief Get SMPS BOM + * @rmtoll CR5 PWR_CR5_SMPSBOMSEL_0/PWR_CR5_SMPSBOMSEL_1 LL_PWR_GetSMPSBOM + * @retval BOM. This parameter can be one of the following values: + * @arg @ref LL_PWR_SMPS_BOM1 + * @arg @ref LL_PWR_SMPS_BOM2 + * @arg @ref LL_PWR_SMPS_BOM3 + */ +__STATIC_INLINE uint32_t LL_PWR_GetSMPSBOM(void) +{ + return (uint32_t)(READ_BIT(PWR->CR5, PWR_CR5_SMPSBOMSEL)); +} + +/** + * @brief Set SMPS Output Level + * @rmtoll CR5 SMPSLVL LL_PWR_SMPS_SetOutputVoltageLevel + * @param OutputVoltageLevel Output Level. This parameter can be one of the values + * of the @arg @ref PWR_LL_SMPS_OUTLVL. + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_1V20 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_1V30 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_1V40 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_1V50 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_1V60 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_1V70 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_1V80 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_1V90 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_2V00 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_2V10 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_2V20 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_2V30 + * @arg @ref LL_PWR_SMPS_OUTPUT_VOLTAGE_2V40 + * @retval None + * @note Please refer the user manual to know which levels are able for this + * feature. + */ +__STATIC_INLINE void LL_PWR_SMPS_SetOutputVoltageLevel(uint32_t OutputVoltageLevel) +{ + MODIFY_REG(PWR->CR5, PWR_CR5_SMPSLVL, OutputVoltageLevel); +} + +/** + * @brief Get SMPS Output Level + * @rmtoll CR5 PWR_CR5_SMPSLVL LL_PWR_SMPS_GetOutputVoltageLevel + * @retval Output Level. This parameter can be one of the values + * of the @arg @ref PWR_LL_SMPS_OUTLVL. + * @note Please refer the user manual to know which levels are able for this + * feature. + */ +__STATIC_INLINE uint32_t LL_PWR_SMPS_GetOutputVoltageLevel(void) +{ + return (uint32_t)(READ_BIT(PWR->CR5, PWR_CR5_SMPSLVL)); +} + +/** + * @brief Enable pull-up and pull-down configuration + * @rmtoll CR1 APC LL_PWR_EnablePUPDCfg + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnablePUPDCfg(void) +{ + SET_BIT(PWR->CR1, PWR_CR1_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration + * @rmtoll CR1 APC LL_PWR_DisablePUPDCfg + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisablePUPDCfg(void) +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_APC); +} + +/** + * @brief Check if pull-up and pull-down configuration is enabled + * @rmtoll CR1 APC LL_PWR_IsEnabledPUPDCfg + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledPUPDCfg(void) +{ + return ((READ_BIT(PWR->CR1, PWR_CR1_APC) == (PWR_CR1_APC)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO pull-up state in Shutdown mode + * @rmtoll PUCRA PUA0-15 LL_PWR_EnableGPIOPullUp\n + * PUCRB PUB0-15 LL_PWR_EnableGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @param GPIONumber Pins Pull-up enable. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + * @note Please refer the user manual to know which IOs are able for this + * feature. + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)(GPIO + 4UL)), GPIONumber); + SET_BIT(*((__IO uint32_t *)GPIO), GPIONumber); +} + +/** + * @brief Disable GPIO pull-up state in Shutdown mode + * @rmtoll PUCRA PUA0-15 LL_PWR_DisableGPIOPullUp\n + * PUCRB PUB0-15 LL_PWR_DisableGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @param GPIONumber Pins Pull-up disable. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + * @note Please refer the user manual to know which IOs are able for this + * feature. + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)GPIO), GPIONumber); +} + +/** + * @brief Check if GPIO pull-up state is enabled + * @rmtoll PUCRA PUA0-15 LL_PWR_IsEnabledGPIOPullUp\n + * PUCRB PUB0-15 LL_PWR_IsEnabledGPIOPullUp + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @param GPIONumber Pins Pull-up disable. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval State of bit (1 or 0). + * @note Please refer the user manual to know which IOs are able for this + * feature. + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + return ((READ_BIT(*((__IO uint32_t *)GPIO), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); +} + +/** + * @brief Enable GPIO pull-down state in Shutdown mode + * @rmtoll PDCRA PDA0-15 LL_PWR_EnableGPIOPullDown\n + * PDCRB PUB0-15 LL_PWR_EnableGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @param GPIONumber Pins Pull-down enable. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + * @note Please refer the user manual to know which IOs are able for this + * feature. + */ +__STATIC_INLINE void LL_PWR_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)GPIO), GPIONumber); + SET_BIT(*((__IO uint32_t *)(GPIO + 4UL)), GPIONumber); +} + +/** + * @brief Disable GPIO pull-down state in Shutdown mode. + * @rmtoll PDCRA PDA0-15 LL_PWR_DisableGPIOPullDown\n + * PDCRB PDB0-15 LL_PWR_DisableGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @param GPIONumber Pins Pull-down disable. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + * @note Please refer the user manual to know which IOs are able for this + * feature. + */ +__STATIC_INLINE void LL_PWR_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + CLEAR_BIT(*((__IO uint32_t *)(GPIO + 4UL)), GPIONumber); +} + +/** + * @brief Checks if GPIO pull-down state is enabled + * @rmtoll PDCRA PDA0-15 LL_PWR_IsEnabledGPIOPullDown\n + * PDCRB PDB0-15 LL_PWR_IsEnabledGPIOPullDown + * @param GPIO This parameter can be one of the following values: + * @arg @ref LL_PWR_GPIO_A + * @arg @ref LL_PWR_GPIO_B + * @param GPIONumber Pins Pull-down disable. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval State of bit (1 or 0). + * @note Please refer the user manual to know which IOs are able for this + * feature. + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + return ((READ_BIT(*((__IO uint32_t *)(GPIO + 4UL)), GPIONumber) == (GPIONumber)) ? 1UL : 0UL); +} + +/** + * @brief Configure the IO in NO PULL configuration for port A. + * @rmtoll PDCRA/PUCRA LL_PWR_SetNoPullA + * @param IO Pins No Pull configuration. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + * @note Please refer the user manual to know which IOs are able for this + * feature. + */ +__STATIC_INLINE void LL_PWR_SetNoPullA(uint32_t IO) +{ + CLEAR_BIT(PWR->PUCRA, IO); + CLEAR_BIT(PWR->PDCRA, IO); +} + +/** + * @brief Configure the IO in NO PULL configuration for port B. + * @rmtoll PDCRB/PUCRB LL_PWR_SetNoPullB + * @param IO Pins Pull-down disable. This parameter can be a combination of the following values: + * @arg @ref LL_PWR_GPIO_BIT_0 + * @arg @ref LL_PWR_GPIO_BIT_1 + * @arg @ref LL_PWR_GPIO_BIT_2 + * @arg @ref LL_PWR_GPIO_BIT_3 + * @arg @ref LL_PWR_GPIO_BIT_4 + * @arg @ref LL_PWR_GPIO_BIT_5 + * @arg @ref LL_PWR_GPIO_BIT_6 + * @arg @ref LL_PWR_GPIO_BIT_7 + * @arg @ref LL_PWR_GPIO_BIT_8 + * @arg @ref LL_PWR_GPIO_BIT_9 + * @arg @ref LL_PWR_GPIO_BIT_10 + * @arg @ref LL_PWR_GPIO_BIT_11 + * @arg @ref LL_PWR_GPIO_BIT_12 + * @arg @ref LL_PWR_GPIO_BIT_13 + * @arg @ref LL_PWR_GPIO_BIT_14 + * @arg @ref LL_PWR_GPIO_BIT_15 + * @retval None + * @note Please refer the user manual to know which IOs are able for this + * feature. + */ +__STATIC_INLINE void LL_PWR_SetNoPullB(uint32_t IO) +{ + CLEAR_BIT(PWR->PUCRB, IO); + CLEAR_BIT(PWR->PDCRB, IO); +} + +/** + * @brief Set SMPS trimming value. + * @rmtoll ENGTRIM LL_PWR_SetSMPSTrim + * @param Trim SMPS output voltage trimming value + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetSMPSTrim(uint32_t Trim) +{ + MODIFY_REG(PWR->ENGTRIM, PWR_ENGTRIM_SMPS_TRIM, ((Trim << PWR_ENGTRIM_SMPS_TRIM_Pos) & PWR_ENGTRIM_SMPS_TRIM)); + SET_BIT(PWR->ENGTRIM, PWR_ENGTRIM_SMPSTRIMEN); +} + +/** + * @brief Get SMPS trimming value. + * @rmtoll TRIMR/ENGTRIM LL_PWR_GetSMPSTrim + * @retval SMPS output voltage trimming value + */ +__STATIC_INLINE uint32_t LL_PWR_GetSMPSTrim(void) +{ + if (READ_BIT(PWR->ENGTRIM, PWR_ENGTRIM_SMPSTRIMEN)) + { + return (uint32_t)(READ_BIT(PWR->ENGTRIM, PWR_ENGTRIM_SMPS_TRIM) >> PWR_ENGTRIM_SMPS_TRIM_Pos); + } + else + { + return (uint32_t)(READ_BIT(PWR->TRIMR, PWR_TRIMR_SMPS_TRIM) >> PWR_TRIMR_SMPS_TRIM_Pos); + } +} + +/** + * @brief Set Main regulator voltage trimming value. + * @rmtoll ENGTRIM LL_PWR_SetMRTrim + * @param Trim Main Regulator voltage trimming value + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetMRTrim(uint32_t Trim) +{ + MODIFY_REG(PWR->ENGTRIM, PWR_ENGTRIM_TRIM_MR, ((Trim << PWR_ENGTRIM_TRIM_MR_Pos) & PWR_ENGTRIM_TRIM_MR)); + SET_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIMMREN); +} + +/** + * @brief Get Main regulator voltage trimming value. + * @rmtoll TRIMR/ENGTRIM LL_PWR_GetMRTrim + * @retval Main regulator voltage trimming value + */ +__STATIC_INLINE uint32_t LL_PWR_GetMRTrim(void) +{ + if (READ_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIMMREN)) + { + return (uint32_t)(READ_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIM_MR) >> PWR_ENGTRIM_TRIM_MR_Pos); + } + else + { + return (uint32_t)(READ_BIT(PWR->TRIMR, PWR_TRIMR_TRIM_MR) >> PWR_TRIMR_TRIM_MR_Pos); + } +} + +#if defined(PWR_ENGTRIM_TRIM_LSI_LPMU) +/** + * @brief Set Low Speed Internal oscillator LPMU trimming value. + * @rmtoll ENGTRIM LL_PWR_SetLPMULSITrim + * @param Trim Low Speed Internal oscillator trimming value + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetLSILPMUTrim(uint32_t Trim) +{ + MODIFY_REG(PWR->ENGTRIM, PWR_ENGTRIM_TRIM_LSI_LPMU, ((Trim << PWR_ENGTRIM_TRIM_LSI_LPMU_Pos) & PWR_ENGTRIM_TRIM_LSI_LPMU)); + SET_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIMLSILPMUEN); +} + +/** + * @brief Get Low Speed Internal oscillator LPMU trimming value. + * @rmtoll TRIMR/ENGTRIM LL_PWR_GetLSITrim + * @retval Low Speed Internal oscillator trimming value + */ +__STATIC_INLINE uint32_t LL_PWR_GetLSILPMUTrim(void) +{ + if (READ_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIMLSILPMUEN)) + { + return (uint32_t)(READ_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIM_LSI_LPMU) >> PWR_ENGTRIM_TRIM_LSI_LPMU_Pos); + } + else + { + return (uint32_t)(READ_BIT(PWR->TRIMR, PWR_TRIMR_TRIM_LSI_LPMU) >> PWR_TRIMR_TRIM_LSI_LPMU_Pos); + } +} +#endif /* PWR_ENGTRIM_TRIM_LSI_LPMU */ + +#if defined(PWR_ENGTRIM_TRIM_RFDREG) +/** + * @brief Set RF LDO trimming value. + * @rmtoll ENGTRIM LL_PWR_SetRFDREGTrim + * @param Trim RF LDO trimming value + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetRFDREGTrim(uint32_t Trim) +{ + MODIFY_REG(PWR->ENGTRIM, PWR_ENGTRIM_TRIM_RFDREG, ((Trim << PWR_ENGTRIM_TRIM_RFDREG_Pos) & PWR_ENGTRIM_TRIM_RFDREG)); + SET_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIMRFDREGEN); +} + +/** + * @brief Get RF LDO trimming value. + * @rmtoll TRIMR/ENGTRIM LL_PWR_GetRFDREGTrim + * @retval RF LDO trimming value + */ +__STATIC_INLINE uint32_t LL_PWR_GetRFDREGTrim(void) +{ + if (READ_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIMRFDREGEN)) + { + return (uint32_t)(READ_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIM_RFDREG) >> PWR_ENGTRIM_TRIM_RFDREG_Pos); + } + else + { + return (uint32_t)(READ_BIT(PWR->TRIMR, PWR_TRIMR_RFD_REG_TRIM) >> PWR_TRIMR_RFD_REG_TRIM_Pos); + } +} +#endif /* PWR_ENGTRIM_TRIM_RFDREG */ + +#if defined(PWR_CR5_SMPS_PRECH_CUR_SEL) +/** + * @brief Select SMPS PRECHARGE limit current. + * @rmtoll CR5 LL_PWR_SetSMPSPrechargeLimitCurrent + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_PWR_SMPS_PRECH_LIMIT_CUR_2_5 + * @arg @ref LL_PWR_SMPS_PRECH_LIMIT_CUR_5 + * @arg @ref LL_PWR_SMPS_PRECH_LIMIT_CUR_10 + * @arg @ref LL_PWR_SMPS_PRECH_LIMIT_CUR_20 + * @retval None + */ +__STATIC_INLINE void LL_PWR_SetSMPSPrechargeLimitCurrent(uint32_t Mode) +{ + MODIFY_REG(PWR->CR5, PWR_CR5_SMPS_PRECH_CUR_SEL, Mode); +} + +/** + * @brief Get SMPS PRECHARGE limit current selected. + * @rmtoll CR5 LL_PWR_GetSMPSPrechargeLimitCurrent + * @retval This parameter can be one of the following values: + * @arg @ref LL_PWR_SMPS_PRECH_LIMIT_CUR_2_5 + * @arg @ref LL_PWR_SMPS_PRECH_LIMIT_CUR_5 + * @arg @ref LL_PWR_SMPS_PRECH_LIMIT_CUR_10 + * @arg @ref LL_PWR_SMPS_PRECH_LIMIT_CUR_20 + */ +__STATIC_INLINE uint32_t LL_PWR_GetSMPSPrechargeLimitCurrent(void) +{ + return (uint32_t)(READ_BIT(PWR->CR5, PWR_CR5_SMPS_PRECH_CUR_SEL)); +} +#endif /* PWR_CR5_SMPS_PRECH_CUR_SEL */ + +#if defined(PWR_CR5_CLKDETR_DISABLE) +/** + * @brief Enable automatic SMPS bypass switching in case of unexpected loss of the SMPS clock. + * @rmtoll CR5 PWR_CR5_CLKDETR_DISABLE LL_PWR_EnableSMPSCLkDet + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSMPSCLkDet(void) +{ + CLEAR_BIT(PWR->CR5, PWR_CR5_CLKDETR_DISABLE); +} + +/** + * @brief Disable automatic SMPS bypass switching in case of unexpected loss of the SMPS clock. + * @rmtoll CR5 PWR_CR5_CLKDETR_DISABLE LL_PWR_DisableSMPSCLkDet + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSMPSCLkDet(void) +{ + SET_BIT(PWR->CR5, PWR_CR5_CLKDETR_DISABLE); +} + +/** + * @brief Checks if automatic IBIAS control during RUN or DEEPSTOP mode is enabled or disabled. + * @rmtoll CR5 PWR_CR5_CLKDETR_DISABLE LL_PWR_IsEnabledSMPSCLkDet + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSMPSCLkDet(void) +{ + return ((READ_BIT(PWR->CR5, PWR_CR5_CLKDETR_DISABLE) == (PWR_CR5_CLKDETR_DISABLE)) ? 0UL : 1UL); +} +#endif /* PWR_CR5_CLKDETR_DISABLE */ + +#if defined(PWR_CR5_SMPS_ENA_DCM) +/** + * @brief Enable Discontinuous conduction mode. + * @rmtoll CR5 PWR_CR5_SMPS_ENA_DCM LL_PWR_EnableSMPSDCM + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableSMPSDCM(void) +{ + SET_BIT(PWR->CR5, PWR_CR5_SMPS_ENA_DCM); +} + +/** + * @brief Disable Discontinuous conduction mode. + * @rmtoll CR5 PWR_CR5_SMPS_ENA_DCM LL_PWR_DisableSMPSDCM + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableSMPSDCM(void) +{ + CLEAR_BIT(PWR->CR5, PWR_CR5_SMPS_ENA_DCM); +} + +/** + * @brief Checks if Discontinuous conduction mode is enabled or disabled. + * @rmtoll CR5 PWR_CR5_SMPS_ENA_DCM LL_PWR_IsEnabledSMPSDCM + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledSMPSDCM(void) +{ + return ((READ_BIT(PWR->CR5, PWR_CR5_SMPS_ENA_DCM) == (PWR_CR5_SMPS_ENA_DCM)) ? 1UL : 0UL); +} +#endif /* PWR_CR5_SMPS_ENA_DCM */ + +/** + * @} + */ + +/** @defgroup PWR_LL_DBG_DEEPSTOP Function to setup the DEEPSTOP2 will be applied instead + * of DEEPSTOP and the debugger features not lost + * @{ + */ + +/** + * @brief Enable the DEEPSTOP2 feature, debugger feature not lost during DEEPSTOP. + * @rmtoll DBGR LL_PWR_EnableDEEPSTOP2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableDEEPSTOP2(void) +{ + SET_BIT(PWR->DBGR, PWR_DBGR_DEEPSTOP2); +} + +/** + * @brief Disable the DEEPSTOP2 feature, debugger feature lost during DEEPSTOP. + * @rmtoll DBGR LL_PWR_DisableDEEPSTOP2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableDEEPSTOP2(void) +{ + CLEAR_BIT(PWR->DBGR, PWR_DBGR_DEEPSTOP2); +} + +/** + * @brief Checks if the DEEPSTOP2 feature is enabled or disabled + * @rmtoll DBGR LL_PWR_IsEnabledDEEPSTOP2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledDEEPSTOP2(void) +{ + return ((READ_BIT(PWR->DBGR, PWR_DBGR_DEEPSTOP2) == (PWR_DBGR_DEEPSTOP2)) ? 1UL : 0UL); +} +/** + * @} + */ + +/** @defgroup PWR_LL_DEEPSTOP_GPIORET Functions to setup the GPIORET bit. + * GPIO retention + * @{ + */ + +/** + * @brief Enable the GPIORET feature, GPIO retain their status during DEEPSTOP + * and exiting from DEEPSTOP. + * @rmtoll CR2 GPIORET LL_PWR_EnableGPIORET + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableGPIORET(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_GPIORET); +} + +/** + * @brief Disable the GPIORET feature, don't retain their status during DEEPSTOP and exiting from DEEPSTOP. + * @rmtoll CR2 GPIORET LL_PWR_DisableGPIORET + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableGPIORET(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_GPIORET); +} + +/** + * @brief Checks if the GPIO retention in DEEPSTOP feature is enabled or disabled + * @rmtoll CR2 GPIORET LL_PWR_IsEnabledGPIORET + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIORET(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_GPIORET) == (PWR_CR2_GPIORET)) ? 1UL : 0UL); +} +/** + * @} + */ + +/** @defgroup PWR_LL_DEEPSTOP_DBGRET Functions to setup the DBGRET bit. + * GPIOA_Pin_2 and GPIOA_Pin_3 retention exiting from DEEPSTOP + * @{ + */ + +/** + * @brief Enable the DBGRET feature, GPIOA_Pin_2 and GPIOA_Pin_3 retain their + * status during DEEPSTOP and exiting from DEEPSTOP. + * @rmtoll CR2 DBGRET LL_PWR_EnableDBGRET + * @retval None + */ +__STATIC_INLINE void LL_PWR_EnableDBGRET(void) +{ + SET_BIT(PWR->CR2, PWR_CR2_DBGRET); +} + +/** + * @brief Disable the DBGRET feature, GPIOA_Pin_2 and GPIOA_Pin_3 don't retain + * status during DEEPSTOP and exiting from DEEPSTOP. + * @rmtoll CR2 DBGRET LL_PWR_DisableDBGRET + * @retval None + */ +__STATIC_INLINE void LL_PWR_DisableDBGRET(void) +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_DBGRET); +} + +/** + * @brief Checks if the GPIOA_Pin_2 and GPIOA_Pin_3 retention in DEEPSTOP + * feature is enabled or disabled + * @rmtoll CR2 DBGRET LL_PWR_IsEnabledDBGRET + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsEnabledDBGRET(void) +{ + return ((READ_BIT(PWR->CR2, PWR_CR2_DBGRET) == (PWR_CR2_DBGRET)) ? 1UL : 0UL); +} +/** + * @} + */ + +/** @defgroup PWR_LL_EF_FLAG_MANAGEMENT PWR FLAG Management + * @{ + */ + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 0. + * @rmtoll WUFA WUF0 LL_PWR_IsActiveFlag_WUA0 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA0(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF0) == (PWR_WUFA_WUF0)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 1. + * @rmtoll WUFA WUF1 LL_PWR_IsActiveFlag_WUA1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA1(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF1) == (PWR_WUFA_WUF1)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 2. + * @rmtoll WUFA WUF2 LL_PWR_IsActiveFlag_WUA2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA2(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF2) == (PWR_WUFA_WUF2)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 3. + * @rmtoll WUFA WUF3 LL_PWR_IsActiveFlag_WUA3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA3(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF3) == (PWR_WUFA_WUF3)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 4. + * @rmtoll WUFA WUF4 LL_PWR_IsActiveFlag_WUA4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA4(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF4) == (PWR_WUFA_WUF4)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 5. + * @rmtoll WUFA WUF5 LL_PWR_IsActiveFlag_WUA5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA5(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF5) == (PWR_WUFA_WUF5)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 6. + * @rmtoll WUFA WUF6 LL_PWR_IsActiveFlag_WUA6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA6(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF6) == (PWR_WUFA_WUF6)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 7. + * @rmtoll WUFA WUF7 LL_PWR_IsActiveFlag_WUA7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA7(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF7) == (PWR_WUFA_WUF7)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 8. + * @rmtoll WUFA WUF8 LL_PWR_IsActiveFlag_WUA8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA8(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF8) == (PWR_WUFA_WUF8)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 9. + * @rmtoll WUFA WUF9 LL_PWR_IsActiveFlag_WUA9 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA9(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF9) == (PWR_WUFA_WUF9)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 10. + * @rmtoll WUFA WUF10 LL_PWR_IsActiveFlag_WUA10 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA10(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF10) == (PWR_WUFA_WUF10)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 11. + * @rmtoll WUFA WUF11 LL_PWR_IsActiveFlag_WUA11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA11(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF11) == (PWR_WUFA_WUF11)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 12. + * @rmtoll WUFA WUF12 LL_PWR_IsActiveFlag_WUA12 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA12(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF12) == (PWR_WUFA_WUF12)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 13. + * @rmtoll WUFA WUF13 LL_PWR_IsActiveFlag_WUA13 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA13(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF13) == (PWR_WUFA_WUF13)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 14. + * @rmtoll WUFA WUF14 LL_PWR_IsActiveFlag_WUA14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA14(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF14) == (PWR_WUFA_WUF14)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 15. + * @rmtoll WUFA WUF15 LL_PWR_IsActiveFlag_WUA15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUA15(void) +{ + return ((READ_BIT(PWR->WUFA, PWR_WUFA_WUF15) == (PWR_WUFA_WUF15)) ? 1UL : 0UL); +} + +/** + * @brief Clear Wake-up Flag WUFA0 + * @rmtoll WUFA WUF0 LL_PWR_ClearFlag_WUA0 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA0(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF0); +} + +/** + * @brief Clear Wake-up Flag WUFA1 + * @rmtoll WUFA WUF1 LL_PWR_ClearFlag_WUA1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA1(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF1); +} +/** + * @brief Clear Wake-up Flag WUFA2 + * @rmtoll WUFA WUF2 LL_PWR_ClearFlag_WUA2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA2(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF2); +} +/** + * @brief Clear Wake-up Flag WUFA3 + * @rmtoll WUFA WUF3 LL_PWR_ClearFlag_WUA3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA3(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF3); +} +/** + * @brief Clear Wake-up Flag WUFA4 + * @rmtoll WUFA WUF4 LL_PWR_ClearFlag_WUA4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA4(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF4); +} + +/** + * @brief Clear Wake-up Flag WUFA5 + * @rmtoll WUFA WUF5 LL_PWR_ClearFlag_WUA5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA5(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF5); +} + +/** + * @brief Clear Wake-up Flag WUFA6 + * @rmtoll WUFA WUF6 LL_PWR_ClearFlag_WUA6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA6(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF6); +} + +/** + * @brief Clear Wake-up Flag WUFA7 + * @rmtoll WUFA WUF7 LL_PWR_ClearFlag_WUA7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA7(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF7); +} + +/** + * @brief Clear Wake-up Flag WUFA8 + * @rmtoll WUFA WUF8 LL_PWR_ClearFlag_WUA8 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA8(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF8); +} + +/** + * @brief Clear Wake-up Flag WUFA9 + * @rmtoll WUFA WUF9 LL_PWR_ClearFlag_WUA9 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA9(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF9); +} + +/** + * @brief Clear Wake-up Flag WUFA10 + * @rmtoll WUFA WUF10 LL_PWR_ClearFlag_WUA10 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA10(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF10); +} + +/** + * @brief Clear Wake-up Flag WUFA11 + * @rmtoll WUFA WUF11 LL_PWR_ClearFlag_WUA11 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA11(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF11); +} + +/** + * @brief Clear Wake-up Flag WUFA12 + * @rmtoll WUFA WUF12 LL_PWR_ClearFlag_WUA12 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA12(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF12); +} + +/** + * @brief Clear Wake-up Flag WUFA13 + * @rmtoll WUFA WUF13 LL_PWR_ClearFlag_WUA13 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA13(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF13); +} + +/** + * @brief Clear Wake-up Flag WUFA14 + * @rmtoll WUFA WUF14 LL_PWR_ClearFlag_WUA14 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA14(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF14); +} + +/** + * @brief Clear Wake-up Flag WUFA15 + * @rmtoll WUFA WUF15 LL_PWR_ClearFlag_WUA15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUA15(void) +{ + WRITE_REG(PWR->WUFA, PWR_WUFA_WUF15); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 0. + * @rmtoll WUFB WUF0 LL_PWR_IsActiveFlag_WUB0 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB0(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF0) == (PWR_WUFB_WUF0)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 1. + * @rmtoll WUFB WUF1 LL_PWR_IsActiveFlag_WUB1 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB1(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF1) == (PWR_WUFB_WUF1)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 2. + * @rmtoll WUFB WUF2 LL_PWR_IsActiveFlag_WUB2 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB2(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF2) == (PWR_WUFB_WUF2)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 3. + * @rmtoll WUFB WUF3 LL_PWR_IsActiveFlag_WUB3 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB3(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF3) == (PWR_WUFB_WUF3)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 4. + * @rmtoll WUFB WUF4 LL_PWR_IsActiveFlag_WUB4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB4(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF4) == (PWR_WUFB_WUF4)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 5. + * @rmtoll WUFB WUF5 LL_PWR_IsActiveFlag_WUB5 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB5(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF5) == (PWR_WUFB_WUF5)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 6. + * @rmtoll WUFB WUF6 LL_PWR_IsActiveFlag_WUB6 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB6(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF6) == (PWR_WUFB_WUF6)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 7. + * @rmtoll WUFB WUF7 LL_PWR_IsActiveFlag_WUB7 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB7(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF7) == (PWR_WUFB_WUF7)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 8. + * @rmtoll WUFB WUF8 LL_PWR_IsActiveFlag_WUB8 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB8(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF8) == (PWR_WUFB_WUF8)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 9. + * @rmtoll WUFB WUF9 LL_PWR_IsActiveFlag_WUB9 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB9(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF9) == (PWR_WUFB_WUF9)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 10. + * @rmtoll WUFB WUF10 LL_PWR_IsActiveFlag_WUB10 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB10(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF10) == (PWR_WUFB_WUF10)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 11. + * @rmtoll WUFB WUF11 LL_PWR_IsActiveFlag_WUB11 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB11(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF11) == (PWR_WUFB_WUF11)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 12. + * @rmtoll WUFB WUF12 LL_PWR_IsActiveFlag_WUB12 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB12(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF12) == (PWR_WUFB_WUF12)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 13. + * @rmtoll WUFB WUF13 LL_PWR_IsActiveFlag_WUB13 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB13(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF13) == (PWR_WUFB_WUF13)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 14. + * @rmtoll WUFB WUF14 LL_PWR_IsActiveFlag_WUB14 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB14(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF14) == (PWR_WUFB_WUF14)) ? 1UL : 0UL); +} + +/** + * @brief Indicate whether a wakeup event is detected on wake up pin 15. + * @rmtoll WUFB WUF15 LL_PWR_IsActiveFlag_WUB15 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WUB15(void) +{ + return ((READ_BIT(PWR->WUFB, PWR_WUFB_WUF15) == (PWR_WUFB_WUF15)) ? 1UL : 0UL); +} + +/** + * @brief Clear Wake-up Flag WUFB0 + * @rmtoll WUFB WUF0 LL_PWR_ClearFlag_WUB0 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB0(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF0); +} + +/** + * @brief Clear Wake-up Flag WUFB1 + * @rmtoll WUFB WUF1 LL_PWR_ClearFlag_WUB1 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB1(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF1); +} +/** + * @brief Clear Wake-up Flag WUFB2 + * @rmtoll WUFB WUF2 LL_PWR_ClearFlag_WUB2 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB2(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF2); +} +/** + * @brief Clear Wake-up Flag WUFB3 + * @rmtoll WUFB WUF3 LL_PWR_ClearFlag_WUB3 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB3(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF3); +} +/** + * @brief Clear Wake-up Flag WUFB4 + * @rmtoll WUFB WUF4 LL_PWR_ClearFlag_WUB4 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB4(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF4); +} + +/** + * @brief Clear Wake-up Flag WUFB5 + * @rmtoll WUFB WUF5 LL_PWR_ClearFlag_WUB5 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB5(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF5); +} + +/** + * @brief Clear Wake-up Flag WUFB6 + * @rmtoll WUFB WUF6 LL_PWR_ClearFlag_WUB6 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB6(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF6); +} + +/** + * @brief Clear Wake-up Flag WUFB7 + * @rmtoll WUFB WUF7 LL_PWR_ClearFlag_WUB7 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB7(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF7); +} + +/** + * @brief Clear Wake-up Flag WUFB8 + * @rmtoll WUFB WUF8 LL_PWR_ClearFlag_WUB8 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB8(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF8); +} + +/** + * @brief Clear Wake-up Flag WUFB9 + * @rmtoll WUFB WUF9 LL_PWR_ClearFlag_WUB9 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB9(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF9); +} + +/** + * @brief Clear Wake-up Flag WUFB10 + * @rmtoll WUFB WUF10 LL_PWR_ClearFlag_WUB10 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB10(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF10); +} + +/** + * @brief Clear Wake-up Flag WUFB11 + * @rmtoll WUFB WUF11 LL_PWR_ClearFlag_WUB11 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB11(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF11); +} + +/** + * @brief Clear Wake-up Flag WUFB12 + * @rmtoll WUFB WUF12 LL_PWR_ClearFlag_WUB12 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB12(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF12); +} + +/** + * @brief Clear Wake-up Flag WUFB13 + * @rmtoll WUFB WUF13 LL_PWR_ClearFlag_WUB13 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB13(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF13); +} + +/** + * @brief Clear Wake-up Flag WUFB14 + * @rmtoll WUFB WUF14 LL_PWR_ClearFlag_WUB14 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB14(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF14); +} + +/** + * @brief Clear Wake-up Flag WUFB15 + * @rmtoll WUFB WUF15 LL_PWR_ClearFlag_WUB15 + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_WUB15(void) +{ + WRITE_REG(PWR->WUFB, PWR_WUFB_WUF15); +} + +/** + * @brief Clear internal Wake-up Flag LPUART + * @rmtoll IWUF IWUF0 LL_PWR_ClearFlag_LPUART + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_LPUART(void) +{ + WRITE_REG(PWR->IWUF, PWR_IWUF_IWUF0); +} + +/** + * @brief Clear internal Wake-up Flag RTC + * @rmtoll IWUF IWUF1 LL_PWR_ClearFlag_RTC + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_RTC(void) +{ + WRITE_REG(PWR->IWUF, PWR_IWUF_IWUF1); +} + +/** + * @brief Clear internal Wake-up Flag LCD + * @rmtoll IWUF IWUF2 LL_PWR_ClearFlag_LCD + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_LCD(void) +{ + WRITE_REG(PWR->IWUF, PWR_IWUF_IWUF2); +} + +/** + * @brief Clear internal Wake-up Flag COMP + * @rmtoll IWUF IWUF3 LL_PWR_ClearFlag_LCD + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_COMP(void) +{ + WRITE_REG(PWR->IWUF, PWR_IWUF_IWUF3); +} + +/** + * @brief Clear internal Wake-up Flag LCSC + * @rmtoll IWUF IWUF4 LL_PWR_ClearFlag_LCSC + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_LCSC(void) +{ + WRITE_REG(PWR->IWUF, PWR_IWUF_IWUF4); +} + +/** + * @brief Clear internal Wake-up Flag MRSUBG + * @rmtoll IWUF WMRSUBGF LL_PWR_ClearFlag_MRSUBG + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_MRSUBG(void) +{ + WRITE_REG(PWR->IWUF, PWR_IWUF_WMRSUBGF); +} + +/** + * @brief Clear MRSUBG Host CPU wakeup flag + * @rmtoll IWUF WMRSUBGHCPUF LL_PWR_ClearFlag_MRSUBGHCPU + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_MRSUBGHCPU(void) +{ + WRITE_REG(PWR->IWUF, PWR_IWUF_WMRSUBGHCPUF); +} + +/** + * @brief Clear LPAWUR wakeup flag + * @rmtoll IWUF WLPAWURF LL_PWR_ClearFlag_LPAWUR + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearFlag_LPAWUR(void) +{ + WRITE_REG(PWR->IWUF, PWR_IWUF_WLPAWURF); +} + +/** + * @} + */ + +/** @defgroup PWR_LL_RF_DEEPSTOP_FLAG flags about RF radio activity start and DEEPSTOP sequence occurred. + * @{ + */ + +/** + * @brief Check if a radio wakeup event occurs. + * @rmtoll EXTSRR RFPHASEF LL_PWR_GetRFWakeupFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_GetRFWakeupFlag(void) +{ + return ((READ_BIT(PWR->EXTSRR, PWR_EXTSRR_RFPHASEF) == (PWR_EXTSRR_RFPHASEF)) ? 1UL : 0UL); +} + +/** + * @brief Clear radio wakeup event occurs flag. + * @rmtoll EXTSRR RFPHASEF LL_PWR_ClearRFWakeupFlag + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearRFWakeupFlag(void) +{ + WRITE_REG(PWR->EXTSRR, PWR_EXTSRR_RFPHASEF); +} + +/** + * @brief Check if a DEEPSTOP sequence occurred. + * @rmtoll EXTSRR DEEPSTOPF LL_PWR_GetDeepstopSeqFlag + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_PWR_GetDeepstopSeqFlag(void) +{ + return ((READ_BIT(PWR->EXTSRR, PWR_EXTSRR_DEEPSTOPF) == (PWR_EXTSRR_DEEPSTOPF)) ? 1UL : 0UL); +} + +/** + * @brief Clear DEEPSTOP sequence occurred flag. + * @rmtoll EXTSRR DEEPSTOPF LL_PWR_ClearDeepstopSeqFlag + * @retval None + */ +__STATIC_INLINE void LL_PWR_ClearDeepstopSeqFlag(void) +{ + WRITE_REG(PWR->EXTSRR, PWR_EXTSRR_DEEPSTOPF); +} +/** + * @} + */ + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup PWR_LL_Init De-initialization function + * @{ + */ +ErrorStatus LL_PWR_DeInit(void); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +#endif /* defined(PWR) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_PWR_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_rcc.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_rcc.h new file mode 100644 index 0000000000..a92eb13aed --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_rcc.h @@ -0,0 +1,2442 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_rcc.h + * @author MCD Application Team + * @brief Header file of RCC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_RCC_H +#define STM32WL3x_LL_RCC_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @defgroup RCC_LL RCC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_LL_Private_Variables RCC Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Private_Macros RCC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_Exported_Types RCC Exported Types + * @{ + */ + +/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure + * @{ + */ + +/** + * @brief RCC Clocks Frequency Structure + */ +typedef struct +{ + uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */ +} LL_RCC_ClocksTypeDef; + +/** + * @} + */ + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants + * @{ + */ + +/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation + * @brief Defines used to adapt values of different oscillators + * @note These values could be modified in the user environment according to + * HW set-up. + * @{ + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 48000000U /*!< Value of the HSE oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) +#define HSI_VALUE 64000000U /*!< Value of the HSI oscillator in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (RC64MPLL_VALUE) +#define RC64MPLL_VALUE 64000000U /*!< Value of the RC 64 MHz PLL clock in Hz */ +#endif /* HSI_VALUE */ + +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */ +#endif /* LSI_VALUE */ + +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_CLEAR_FLAG Ready Interrupt Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg LL_RCC_WriteReg function + * @{ + */ +#define LL_RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt Flag/Clear */ +#define LL_RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt Flag/Clear */ +#define LL_RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt Flag/Clear */ +#define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt Flag/Clear */ +#define LL_RCC_CIFR_PLLRDYF RCC_CIFR_HSIPLLRDYF /*!< PLL Ready Interrupt Flag/Clear */ +#define LL_RCC_CIFR_PLLUNLOCKDETF RCC_CIFR_HSIPLLUNLOCKDETF /*!< PLL Unlock Interrupt Flag/Clear */ +#define LL_RCC_CIFR_RTCRSTRELF RCC_CIFR_RTCRSTF /*!< RTC Reset Release Interrupt Flag/Clear */ +#define LL_RCC_CIFR_WDGRSTRELF RCC_CIFR_WDGRSTF /*!< WDG Reset Release Interrupt Flag/Clear */ +#if defined(RCC_CIFR_LPURSTF) +#define LL_RCC_CIFR_LPURSTRELF RCC_CIFR_LPURSTF /*!< LPUART Reset Release Interrupt Flag/Clear */ +#endif +#if defined(RCC_CIFR_LCDRSTF) +#define LL_RCC_CIFR_LCDRSTRELF RCC_CIFR_LCDRSTF /*!< LCD Reset Release Interrupt Flag/Clear */ +#endif +#if defined(RCC_CIFR_LCSCRSTF) +#define LL_RCC_CIFR_LCSCRSTRELF RCC_CIFR_LCSCRSTF /*!< LCSC Reset Release Interrupt Flag/Clear */ +#endif +/** + * @} + */ + +/** @defgroup RCC_LL_EC_GET_FLAG Reset Flags Defines + * @brief Flags defines which can be used with LL_RCC_ReadReg function + * @{ + */ +#define LL_RCC_CSR_LOCKUPRSTF RCC_CSR_LOCKUPRSTF /*!< CPU lockup reset flag */ +#define LL_RCC_CSR_WDGRSTF RCC_CSR_WDGRSTF /*!< Watchdog reset flag */ +#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software reset flag */ +#define LL_RCC_CSR_PORRSTF RCC_CSR_PORRSTF /*!< Power-On or BOR reset flag */ +#define LL_RCC_CSR_PADRSTF RCC_CSR_PADRSTF /*!< NRSTn pad reset flag */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_IT IT Enable Defines + * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions + * @{ + */ +#define LL_RCC_CIER_PLLRDYIE RCC_CIER_HSIPLLRDYIE /*!< PLL ready interrupt enable */ +#define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE ready interrupt enable */ +#define LL_RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE /*!< HSI ready interrupt enable */ +#define LL_RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE /*!< LSE ready interrupt enable */ +#define LL_RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE /*!< LSI ready interrupt enable */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability + * @{ + */ +#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_CSSWCR_LSEDRV_0 /*!< Xtal mode medium low driving capability */ +#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_CSSWCR_LSEDRV_1 /*!< Xtal mode medium high driving capability */ +#define LL_RCC_LSEDRIVE_HIGH RCC_CSSWCR_LSEDRV /*!< Xtal mode higher driving capability */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_HSE_CURRENT_CONTROL HSE current control max limits + * @{ + */ +#define LL_RCC_HSE_CURRENTMAX_INIT 40 /*!< HSE current control max limit = 8 * 40uA */ + +/** + * @} + */ + +#if defined(RCC_RFSWHSECR_SATRG) +/** @defgroup RCC_LL_EC_HSE_SENSE_AMPLIFIER HSE sense amplifier threshold + * @{ + */ +#define LL_RCC_HSEAMPTHRESHOLD_1_2 (0x000000000U) /*!< HSE sense amplifier bias current factor = 1/2*/ +#define LL_RCC_HSEAMPTHRESHOLD_3_4 RCC_RFSWHSECR_SATRG /*!< HSE sense amplifier bias current factor = 3/4*/ +/** + * @} + */ +#endif + +/** @defgroup RCC_LL_EC_LOCKDET_NSTOP LOCKDET_NSTOP time selection + * @{ + */ +#define LL_RCC_LOCKDET_NSTOP_0 0x00000000U +#define LL_RCC_LOCKDET_NSTOP_1 RCC_LOCKDET_NSTOP_0 +#define LL_RCC_LOCKDET_NSTOP_2 RCC_LOCKDET_NSTOP_1 +#define LL_RCC_LOCKDET_NSTOP_3 RCC_LOCKDET_NSTOP_1 | RCC_LOCKDET_NSTOP_0 +#define LL_RCC_LOCKDET_NSTOP_4 RCC_LOCKDET_NSTOP_2 +#define LL_RCC_LOCKDET_NSTOP_5 RCC_LOCKDET_NSTOP_2 | RCC_LOCKDET_NSTOP_0 +#define LL_RCC_LOCKDET_NSTOP_6 RCC_LOCKDET_NSTOP_2 | RCC_LOCKDET_NSTOP_1 +#define LL_RCC_LOCKDET_NSTOP_7 RCC_LOCKDET_NSTOP_2 | RCC_LOCKDET_NSTOP_1 | RCC_LOCKDET_NSTOP_0 +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSCO_CLKSOURCE LSCO Source Selection + * @{ + */ +#define LL_RCC_LSCO_CLKSOURCE_LSE RCC_CFGR_CLKSLOWSEL_0 /*!< LSE selection for low speed clock */ +#define LL_RCC_LSCO_CLKSOURCE_LSI RCC_CFGR_CLKSLOWSEL_1 /*!< Enable the LSI selection for low speed clock */ +#define LL_RCC_LSCO_CLKSOURCE_HSI64M_DIV2048 RCC_CFGR_CLKSLOWSEL /*!< HSI_64M divided by 2048 selection for low speed clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSCO_CLKSOURCE_ENABLE Enable LSCO Clock Source + * @{ + */ +#define LL_RCC_LSCO_LSI RCC_CR_LSION /*!< Enable LSI selection for low speed clock */ +#define LL_RCC_LSCO_LSE RCC_CR_LSEON /*!< Enable LSE selection for low speed clock */ +#define LL_RCC_LSCO_LSEBYP RCC_CR_LSEBYP /*!< Enable LSE clock bypass selection for low speed clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_HSEPLLBUFON Enable the External high speed clock buffer for PLL + * @{ + */ +#define LL_RCC_HSEPLLBUF_OFF 0x00000000U /*!< Disable the External high speed clock buffer for PLL */ +#define LL_RCC_HSEPLLBUF_ON RCC_CR_HSEPLLBUFON /*!< Enable the External high speed clock buffer for PLL. Always enabled when the radio is used */ +/** + * @} + */ + + +/** @defgroup RCC_LL_EC_SYS_CLKSOURCE Enable HS clock Source + * @{ + */ +#define LL_RCC_SYS_HSI 0x00000000U /*!< Enable HSI system clock */ +#define LL_RCC_SYS_HSE RCC_CR_HSEON /*!< Enable HSE system clock */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_RF_CLKSOURCE RF system clock + * @{ + */ +#if defined(RCC_APB2ENR_CLKBLEDIV_0) +#define LL_RCC_RF_CLK_32M RCC_APB2ENR_CLKBLEDIV_0 /*!< Radio system clock 32 MHz*/ +#else +#define LL_RCC_RF_CLK_32M 0x00000000U /*!< Radio system clock 32 MHz*/ +#endif +#if defined(RCC_APB2ENR_CLKBLEDIV_1) +#define LL_RCC_RF_CLK_16M RCC_APB2ENR_CLKBLEDIV_1 /*!< Radio system clock 16 MHz*/ +#else +#define LL_RCC_RF_CLK_16M RCC_APB2ENR_CLKBLEDIV /*!< Radio system clock 16 MHz*/ +#endif +/** + * @} + */ + +/** @defgroup RCC_DIRECT_HSE_Clock_Divider DIRECT HSE Clock Divider + * @{ + */ + +#define LL_RCC_DIRECT_HSE_DIV_1 0x00000000U /*!< DIRECT HSE division factor = 1 */ +#define LL_RCC_DIRECT_HSE_DIV_2 RCC_CFGR_CLKSYSDIV_0 /*!< DIRECT HSE division factor = 2 */ +#define LL_RCC_DIRECT_HSE_DIV_3 RCC_CFGR_CLKSYSDIV_1 /*!< DIRECT HSE division factor = 3 */ +#define LL_RCC_DIRECT_HSE_DIV_6 (RCC_CFGR_CLKSYSDIV_1 | RCC_CFGR_CLKSYSDIV_0) /*!< DIRECT HSE division factor = 6 */ +#define LL_RCC_DIRECT_HSE_DIV_12 RCC_CFGR_CLKSYSDIV_2 /*!< DIRECT HSE division factor = 12 */ +#define LL_RCC_DIRECT_HSE_DIV_24 (RCC_CFGR_CLKSYSDIV_2 | RCC_CFGR_CLKSYSDIV_0) /*!< DIRECT HSE division factor = 24 */ +#define LL_RCC_DIRECT_HSE_DIV_48 (RCC_CFGR_CLKSYSDIV_2 | RCC_CFGR_CLKSYSDIV_1) /*!< DIRECT HSE division factor = 48 */ + +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_DIV RC64MPLL divider factor to have the System clock + * @{ + */ +#define LL_RCC_RC64MPLL_DIV_1 0x00000000U /*!< RC64MPLL not divided as SYSCLK */ +#define LL_RCC_RC64MPLL_DIV_2 RCC_CFGR_CLKSYSDIV_0 /*!< RC64MPLL divided by 2 as SYSCLK */ +#define LL_RCC_RC64MPLL_DIV_4 RCC_CFGR_CLKSYSDIV_1 /*!< RC64MPLL divided by 4 as SYSCLK */ +#define LL_RCC_RC64MPLL_DIV_8 (RCC_CFGR_CLKSYSDIV_1 | RCC_CFGR_CLKSYSDIV_0) /*!< RC64MPLL divided by 8 as SYSCLK */ +#define LL_RCC_RC64MPLL_DIV_16 RCC_CFGR_CLKSYSDIV_2 /*!< RC64MPLL divided by 16 as SYSCLK */ +#define LL_RCC_RC64MPLL_DIV_32 (RCC_CFGR_CLKSYSDIV_2 | RCC_CFGR_CLKSYSDIV_0) /*!< RC64MPLL divided by 32 as SYSCLK */ +#define LL_RCC_RC64MPLL_DIV_64 (RCC_CFGR_CLKSYSDIV_2 | RCC_CFGR_CLKSYSDIV_1) /*!< RC64MPLL divided by 64 as SYSCLK */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_SWITCH_DIV RC64MPLL divider factor to switch the System clock with MR_BLE or MR_SUBG enabled + * @{ + */ +#define LL_RCC_RC64MPLL_SWITCH_DIV_1 0x00000000U /*!< RC64MPLL not divided as SYSCLK */ +#define LL_RCC_RC64MPLL_SWITCH_DIV_2 RCC_CSCMDR_CLKSYSDIV_REQ_0 /*!< RC64MPLL divided by 2 as SYSCLK */ +#define LL_RCC_RC64MPLL_SWITCH_DIV_4 RCC_CSCMDR_CLKSYSDIV_REQ_1 /*!< RC64MPLL divided by 4 as SYSCLK */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SYSCLK_SWITCH_STATUS Status of the RC64MPLL clock switch with MR_BLE or MR_SUBG enabled + * @{ + */ +#define LL_RCC_RC64MPLL_SWITCH_STATUS_IDLE 0x00000000U /*!< RC64MPLL Clock Switch Status IDLE */ +#define LL_RCC_RC64MPLL_SWITCH_STATUS_ONGOING RCC_CSCMDR_STATUS_0 /*!< RC64MPLL Clock Switch Status ONGOING */ +#define LL_RCC_RC64MPLL_SWITCH_STATUS_DONE RCC_CSCMDR_STATUS_1 /*!< RC64MPLL Clock Switch Status DONE */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCOSOURCE MCO SOURCE selection + * @{ + */ +#define LL_RCC_MCOSOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */ +#define LL_RCC_MCOSOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO source */ +#define LL_RCC_MCOSOURCE_HSI (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1) /*!< HSI selection as MCO source */ +#define LL_RCC_MCOSOURCE_RC64MPLL (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1) /*!< RC64MPLL selection as MCO source */ +#define LL_RCC_MCOSOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE after stabilization selection as MCO source */ +#define LL_RCC_MCOSOURCE_HSI64M_DIV2048 (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< HSI_64M divided by 2048 seelction as MCO source */ +#define LL_RCC_MCOSOURCE_SMPS (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< SMPS selection as MCO source */ +#define LL_RCC_MCOSOURCE_ADC RCC_CFGR_MCOSEL /*!< ADC selection as MCO source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_MCO_DIV MCO prescaler + * @{ + */ +#define LL_RCC_MCO_DIV_1 0x00000000U /*!< MCO not divided */ +#define LL_RCC_MCO_DIV_2 RCC_CFGR_CCOPRE_0 /*!< MCO divided by 2 */ +#define LL_RCC_MCO_DIV_4 RCC_CFGR_CCOPRE_1 /*!< MCO divided by 4 */ +#define LL_RCC_MCO_DIV_8 (RCC_CFGR_CCOPRE_1 | RCC_CFGR_CCOPRE_0) /*!< MCO divided by 8 */ +#define LL_RCC_MCO_DIV_16 RCC_CFGR_CCOPRE_2 /*!< MCO divided by 16 */ +#define LL_RCC_MCO_DIV_32 (RCC_CFGR_CCOPRE_2 | RCC_CFGR_CCOPRE_0) /*!< MCO divided by 32 */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_LSCOSOURCE LCO SOURCE selection + * @{ + */ +#define LL_RCC_LSCOSOURCE_NOCLOCK 0x00000000U /*!< LSCO output disabled, no clock on LSCO */ +#define LL_RCC_LSCOSOURCE_LSI RCC_CFGR_LCOSEL_1 /*!< LSI selection as LSCO source */ +#define LL_RCC_LSCOSOURCE_LSE (RCC_CFGR_LCOSEL_0|RCC_CFGR_LCOSEL_1) /*!< LSE selection as LSCO source */ +/** + * @} + */ + +/** @defgroup RCC_LL_EC_SMPS_DIV SMPS prescaler + * @{ + */ +#define LL_RCC_SMPS_DIV_2 (0x00000000U) /*!< SMPS clock division 2 (SMPS clock is 8 MHz)*/ +#define LL_RCC_SMPS_DIV_4 RCC_CFGR_SMPSDIV /*!< SMPS clock division 4 (SMPS clock is 4 MHz)*/ +/** + * @} + */ + +#if defined(RCC_CFGR_LPUCLKSEL) +/** @defgroup RCC_LL_CFGR_LPU_CLK LPUART clock selection + * @{ + */ +#define LL_RCC_LPUCLKSEL_CLK16M (0x00000000U) /*!< LPUART Clock Selection 16 MHz */ +#define LL_RCC_LPUCLKSEL_CLKLSE RCC_CFGR_LPUCLKSEL /*!< LPUART Clock Selection LSE source */ +/** + * @} + */ +#endif /*RCC_CFGR_LPUCLKSEL*/ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency + * @{ + */ +#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */ +#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RCC_LL_EC_SPI3_I2S SPI3_I2S + * @{ + */ +#define LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT_DIV 0x00000000U /*!< SPI3 I2S 16 MHz clock source selection bits */ +#if !defined(RCC_CFGR_SPI3I2SCLKSEL_0) +#define LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT RCC_CFGR_SPI3I2SCLKSEL /*!< SPI3 I2S 32 MHz clock source selection bits */ +#endif +#if defined(RCC_CFGR_SPI3I2SCLKSEL_0) +#define LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT RCC_CFGR_SPI3I2SCLKSEL_0 /*!< SPI3 I2S 24/32 MHz clock source selection bits */ +#define LL_RCC_SPI3_I2S_CLKSOURCE_CLK_RC64MPLL RCC_CFGR_SPI3I2SCLKSEL_1 /*!< SPI3 I2S 64 MHz clock source selection bits */ +#endif + +/** + * @} + */ + + +#if defined(SPI3) +#define LL_RCC_SPI3_CLKSOURCE 0x00000000U /*!< SPI3 clock source */ +#endif + +#if defined(RCC_CFGR_LPUCLKSEL) +/** @defgroup RCC_LL_EC_LPUART1 LPUART1 + * @{ + */ +#define LL_RCC_LPUART1_CLKSOURCE 0x00000000U /*!< LPUART1 clock source */ +/** + * @} + */ +#endif /* RCC_CFGR_LPUCLKSEL */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros + * @{ + */ + +/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RCC register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RCC register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_LL_EF_HSE HSE + * @{ + */ + +/** + * @brief Enable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Disable HSE crystal oscillator (HSE ON) + * @rmtoll CR HSEON LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); +} + +/** + * @brief Check if HSE crystal oscillator is enabled. + * @rmtoll CR HSEON LL_RCC_HSE_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsEnabled(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSEON) == (RCC_CR_HSEON)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE oscillator Ready + * @rmtoll CR HSERDY LL_RCC_HSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY)) ? 1UL : 0UL); +} + +/** + * @brief Set HSE capacitor tuning + * @rmtoll RFSWHSECR SWXOTUNE LL_RCC_HSE_SetCapacitorTuning + * @param Value Between Min_Data = 0 and Max_Data = 63 + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSE_SetCapacitorTuning(uint32_t Value) +{ + MODIFY_REG(RCC->RFSWHSECR, RCC_RFSWHSECR_SWXOTUNE, Value << RCC_RFSWHSECR_SWXOTUNE_Pos); + SET_BIT(RCC->RFSWHSECR, RCC_RFSWHSECR_SWXOTUNEEN); +} + +/** + * @brief Get HSE capacitor tuning + * @rmtoll RFSWHSECR SWXOTUNE LL_RCC_HSE_GetCapacitorTuning + * @retval Between Min_Data = 0 and Max_Data = 63 + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_GetCapacitorTuning(void) +{ + return (uint32_t)(READ_BIT(RCC->RFSWHSECR, RCC_RFSWHSECR_SWXOTUNE) >> RCC_RFSWHSECR_SWXOTUNE_Pos); +} + + +/** + * @brief Set HSE current control. The Current is calculated with the following + * formula: Iref * GMC[4:0]. + * Iref(GMC[6:5])--> 00= 10uA + * Iref(GMC[6:5])--> 01= 20uA + * Iref(GMC[6:5])--> 1x= 40uA + * Example GMC[6:0]=0b1111001=25*40uA + * @rmtoll RFSWHSECR GMC LL_RCC_HSE_SetCurrentControl + * @param CurrentMax HSE current calculated with the previous formula + */ +__STATIC_INLINE void LL_RCC_HSE_SetCurrentControl(uint32_t CurrentMax) +{ + MODIFY_REG_FIELD(RCC->RFSWHSECR, RCC_RFSWHSECR_GMC, CurrentMax); +} + +/** + * @brief Get HSE current control + * @rmtoll RFSWHSECR GMC LL_RCC_HSE_GetCurrentControl + * @retval Returned HSE current control + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_GetCurrentControl(void) +{ + return (uint32_t)(READ_REG_FIELD(RCC->RFSWHSECR, RCC_RFSWHSECR_GMC)); +} + +#if defined(RCC_RFSWHSECR_SATRG) +/** + * @brief Set HSE sense amplifier threshold + * @rmtoll RFSWHSECR SATRG LL_RCC_HSE_SetSenseAmplifier + * @param SenseAmplifier This parameter can be one of the following values: + * @arg @ref LL_RCC_HSEAMPTHRESHOLD_1_2 + * @arg @ref LL_RCC_HSEAMPTHRESHOLD_3_4 + */ +__STATIC_INLINE void LL_RCC_HSE_SetSenseAmplifier(uint32_t SenseAmplifier) +{ + MODIFY_REG(RCC->RFSWHSECR, RCC_RFSWHSECR_SATRG, SenseAmplifier); +} + +/** + * @brief Get HSE current control + * @rmtoll RFSWHSECR SATRG LL_RCC_HSE_GetSenseAmplifier + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_HSEAMPTHRESHOLD_1_2 + * @arg @ref LL_RCC_HSEAMPTHRESHOLD_3_4 + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_GetSenseAmplifier(void) +{ + return (uint32_t)(READ_BIT(RCC->RFSWHSECR, RCC_RFSWHSECR_SATRG)); +} +#endif + +#if defined(RCC_RFSWHSECR_ISTARTUP) +/** + * @brief Set HSE startup current + * @rmtoll RFSWHSECR ISTARTUP LL_RCC_HSE_SetStartupCurrent + * @param StartupCurrent HSE startup current + */ +__STATIC_INLINE void LL_RCC_HSE_SetStartupCurrent(uint32_t StartupCurrent) +{ + MODIFY_REG_FIELD(RCC->RFSWHSECR, RCC_RFSWHSECR_ISTARTUP, StartupCurrent); +} + +/** + * @brief Get HSE startup current + * @rmtoll RFSWHSECR ISTARTUP LL_RCC_HSE_GetStartupCurrent + * @retval Startup Current value + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_GetStartupCurrent(void) +{ + return (uint32_t)(READ_REG_FIELD(RCC->RFSWHSECR, RCC_RFSWHSECR_ISTARTUP)); +} +#endif +#if defined(RCC_RFSWHSECR_AMPLTHRESH) +/** + * @brief Set HSE Amplitude Control threshold + * @rmtoll RFSWHSECR AMPLTHRESH LL_RCC_HSE_SetAmplitudeThreshold + * @param AmplThr HSE Amplitude Control threshold + */ +__STATIC_INLINE void LL_RCC_HSE_SetAmplitudeThreshold(uint32_t AmplThr) +{ + MODIFY_REG_FIELD(RCC->RFSWHSECR, RCC_RFSWHSECR_AMPLTHRESH, AmplThr); +} + +/** + * @brief Get HSE Amplitude Control threshold + * @rmtoll RFSWHSECR AMPLTHRESH LL_RCC_HSE_GetAmplitudeThreshold + * @retval HSE Amplitude Control threshold + */ +__STATIC_INLINE uint32_t LL_RCC_HSE_GetAmplitudeThreshold(void) +{ + return (uint32_t)(READ_REG_FIELD(RCC->RFSWHSECR, RCC_RFSWHSECR_AMPLTHRESH)); +} +#endif +/** + * @} + */ + +/** @defgroup RCC_LL_EF_HSI HSI + * @{ + */ + +/** + * @brief Enable HSI + * @rmtoll CFGR STOPHSI LL_RCC_HSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Enable(void) +{ + CLEAR_BIT(RCC->CFGR, RCC_CFGR_STOPHSI); + CLEAR_BIT(RCC->CFGR, RCC_CFGR_HSESEL); +} + +/** + * @brief Disable HSI + * @rmtoll CFGR STOPHSI LL_RCC_HSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_Disable(void) +{ + SET_BIT(RCC->CFGR, RCC_CFGR_HSESEL); + SET_BIT(RCC->CFGR, RCC_CFGR_STOPHSI); +} + +/** + * @brief Check if HSI clock is ready + * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY)) ? 1UL : 0UL); +} + +/** + * @brief Set HSI Calibration trimming + * @note user-programmable trimming value + * @note Default value is loaded by HW at reset as soon as the flash controller achieves the reading of the + * information in Flash memory (reg. ICSCR). + * @rmtoll CSSWCR HSITRIM LL_RCC_HSI_SetCalibTrimming + * @param Value Between Min_Data = 0 and Max_Data = 127 + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->CSSWCR, RCC_CSSWCR_HSITRIMSW, Value << RCC_CSSWCR_HSITRIMSW_Pos); + SET_BIT(RCC->CSSWCR, RCC_CSSWCR_HSISWTRIMEN); +} + +/** + * @brief Get HSI Calibration trimming + * @rmtoll ICSCR/CSSWCR HSITRIM LL_RCC_HSI_GetCalibTrimming + * @retval Between Min_Data = 0 and Max_Data = 127 + */ +__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void) +{ + if ((uint32_t)(READ_BIT(RCC->CSSWCR, RCC_CSSWCR_HSISWTRIMEN))) + { + return (uint32_t)(READ_BIT(RCC->CSSWCR, RCC_CSSWCR_HSITRIMSW) >> RCC_CSSWCR_HSITRIMSW_Pos); + } + else + { + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos); + } +} +/** + * @} + */ + +/** @defgroup RCC_LL_EF_DIRECT_HSE DIRECT_HSE + * @{ + */ +/** + * @brief Enable DIRECT_HSE mode + * @rmtoll CFGR HSESEL/STOPHSI LL_RCC_HSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_DIRECT_HSE_Enable(void) +{ + while (READ_BIT(RCC->CR, RCC_CR_HSERDY) == 0); + SET_BIT(RCC->CFGR, RCC_CFGR_HSESEL); + for (volatile int i = 0; i < 6; i++) + { + __asm("NOP"); + } + SET_BIT(RCC->CFGR, RCC_CFGR_STOPHSI); +} + +/** + * @brief Disable DIRECT_HSE + * @rmtoll CFGR HSESEL/STOPHSI LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_DIRECT_HSE_Disable(void) +{ + CLEAR_BIT(RCC->CFGR, RCC_CFGR_STOPHSI); + while (LL_RCC_HSI_IsReady() == 0); + CLEAR_BIT(RCC->CFGR, RCC_CFGR_HSESEL); +} + +/** + * @brief Check if DIRECT_HSE mode is ready + * @rmtoll CFGR HSESEL/STOPHSI LL_RCC_DIRECT_HSE_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_DIRECT_HSE_IsEnabled(void) +{ +#if defined(RCC_CFGR_HSESEL_STATUS) + return ((READ_BIT(RCC->CFGR, RCC_CFGR_HSESEL_STATUS) == (RCC_CFGR_HSESEL_STATUS)) ? 1UL : 0UL); +#else + return (((READ_BIT(RCC->CFGR, RCC_CFGR_HSESEL) == (RCC_CFGR_HSESEL)) && (READ_BIT(RCC->CFGR, RCC_CFGR_STOPHSI) == (RCC_CFGR_STOPHSI))) ? 1UL : 0UL); +#endif +} + +#if defined(RCC_CFGR_HSESEL_STATUS) +/** + * @brief Get the DIRECT HSE Selection Status + * @rmtoll CFGR HSESEL_STATUS LL_RCC_Get_DIRECT_HSESEL_Status + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_Get_DIRECT_HSESEL_Status(void) +{ + return ((READ_BIT(RCC->CFGR, RCC_CFGR_HSESEL_STATUS) == (RCC_CFGR_HSESEL_STATUS)) ? 1UL : 0UL); +} +#endif + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LOCKDET_NSTOP LOCKDET_NSTOP + * @{ + */ + +/** + * @brief Set LOCKDET_NSTOP time + * @rmtoll CR LOCKDET_NSTOP LL_RCC_LOCKDET_NSTOP_SetTime + * @param time This parameter can be one of the following values: + * @arg @ref LL_RCC_LOCKDET_NSTOP_0 + * @arg @ref LL_RCC_LOCKDET_NSTOP_1 + * @arg @ref LL_RCC_LOCKDET_NSTOP_2 + * @arg @ref LL_RCC_LOCKDET_NSTOP_3 + * @arg @ref LL_RCC_LOCKDET_NSTOP_4 + * @arg @ref LL_RCC_LOCKDET_NSTOP_5 + * @arg @ref LL_RCC_LOCKDET_NSTOP_6 + * @arg @ref LL_RCC_LOCKDET_NSTOP_7 + * @retval None + */ +__STATIC_INLINE void LL_RCC_LOCKDET_NSTOP_SetTime(uint32_t time) +{ + MODIFY_REG(RCC->CR, RCC_CR_LOCKDET_NSTOP, time); +} + +/** + * @brief Get RC64MPLL prescaler + * @rmtoll CR LOCKDET_NSTOP LL_RCC_LOCKDET_NSTOP_GetTime + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LOCKDET_NSTOP_0 + * @arg @ref LL_RCC_LOCKDET_NSTOP_1 + * @arg @ref LL_RCC_LOCKDET_NSTOP_2 + * @arg @ref LL_RCC_LOCKDET_NSTOP_3 + * @arg @ref LL_RCC_LOCKDET_NSTOP_4 + * @arg @ref LL_RCC_LOCKDET_NSTOP_5 + * @arg @ref LL_RCC_LOCKDET_NSTOP_6 + * @arg @ref LL_RCC_LOCKDET_NSTOP_7 + */ +__STATIC_INLINE uint32_t LL_RCC_LOCKDET_NSTOP_GetTime(void) +{ + return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_LOCKDET_NSTOP)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSCO LSCO + * @{ + */ + +/** + * @brief Configure Low speed clock selection + * @rmtoll CFGR CLKSLOWSEL LL_RCC_LSCO_SetSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_HSI64M_DIV2048 + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCO_SetSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_CLKSLOWSEL, Source); +} + +/** + * @brief Get Low speed clock selection + * @rmtoll CFGR CLKSLOWSEL LL_RCC_LSCO_GetSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE + * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI + * @arg @ref LL_RCC_LSCO_CLKSOURCE_HSI64M_DIV2048 + */ +__STATIC_INLINE uint32_t LL_RCC_LSCO_GetSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_CLKSLOWSEL)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSE LSE + * @{ + */ + +/** + * @brief Enable Low Speed External (LSE) crystal. + * @rmtoll CR LSEON LL_RCC_LSE_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_LSEON); +} + +/** + * @brief Disable Low Speed External (LSE) crystal. + * @rmtoll CR LSEON LL_RCC_LSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_LSEON); +} + +/** + * @brief Check if Low Speed External (LSE) crystal has been enabled or not + * @rmtoll CR LSEON LL_RCC_LSE_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsEnabled(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_LSEON) == (RCC_CR_LSEON)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE oscillator Ready + * @rmtoll CR LSERDY LL_RCC_LSE_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_LSERDY) == (RCC_CR_LSERDY)) ? 1UL : 0UL); +} + +/** + * @brief Enable external clock source (LSE bypass). + * @rmtoll CR LSEBYP LL_RCC_LSE_EnableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void) +{ + SET_BIT(RCC->CR, RCC_CR_LSEBYP); +} + +/** + * @brief Disable external clock source (LSE bypass). + * @rmtoll CR LSEBYP LL_RCC_LSE_DisableBypass + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_LSEBYP); +} + +/** + * @brief Check if LSE bypass configuration is enabled. + * @rmtoll CR LSEBYP LL_RCC_LSE_IsBypassEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_IsBypassEnabled(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_LSEBYP) == (RCC_CR_LSEBYP)) ? 1UL : 0UL); +} + +/** + * @brief Set LSE oscillator drive capability + * @note The oscillator is in Xtal mode when it is not in bypass mode. + * @rmtoll CSSWCR LSEDRV LL_RCC_LSE_SetDriveCapability + * @param LSEDrive This parameter can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive) +{ + MODIFY_REG(RCC->CSSWCR, RCC_CSSWCR_LSEDRV, LSEDrive); +} + +/** + * @brief Get LSE oscillator drive capability + * @rmtoll CSSWCR LSEDRV LL_RCC_LSE_GetDriveCapability + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LSEDRIVE_LOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW + * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH + * @arg @ref LL_RCC_LSEDRIVE_HIGH + */ +__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void) +{ + return (uint32_t)(READ_BIT(RCC->CSSWCR, RCC_CSSWCR_LSEDRV)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_LSI LSI + * @{ + */ + +/** + * @brief Enable LSI Oscillator + * @rmtoll CR LSION LL_RCC_LSI_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_LSION); +} + +/** + * @brief Disable LSI Oscillator + * @rmtoll CR LSION LL_RCC_LSI_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_LSION); +} + +/** + * @brief Check if LSI crystal oscillator is enabled. + * @rmtoll CR LSION LL_RCC_LSI_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsEnabled(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_LSION) == (RCC_CR_LSION)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSI is Ready + * @rmtoll CR LSIRDY LL_RCC_LSI_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_LSIRDY) == (RCC_CR_LSIRDY)) ? 1UL : 0UL); +} + +/** + * @brief Enable LSI trimming procedure + * @rmtoll ICSCR LSITRIMEN LL_RCC_LSI_EnableTrimming + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_EnableTrimming(void) +{ + SET_BIT(RCC->ICSCR, RCC_ICSCR_LSITRIMEN); +} + +/** + * @brief Disable LSI trimming procedure + * @rmtoll ICSCR LSITRIMEN LL_RCC_LSI_DisableTrimming + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_DisableTrimming(void) +{ + CLEAR_BIT(RCC->ICSCR, RCC_ICSCR_LSITRIMEN); +} + +/** + * @brief Check if LSI trimming procedure is enabled + * @rmtoll ICSCR LSITRIMEN LL_RCC_LSI_IsTrimmingEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsTrimmingEnabled(void) +{ + return ((READ_BIT(RCC->ICSCR, RCC_ICSCR_LSITRIMEN) == (RCC_ICSCR_LSITRIMEN)) ? 1UL : 0UL); +} + +/** + * @brief Set LSI trimming value + * @note After enabling the LSI oscillator and the LSI trimming procedure + * the LSI trimming value is decreased from 15 to 0, till LSITRIMOK raised + * @rmtoll CSSWCR LSISWBW LL_RCC_LSI_SetTrimming + * @param Value Between Min_Data = 0 and Max_Data = 15 + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSI_SetTrimming(uint32_t Value) +{ + MODIFY_REG(RCC->CSSWCR, RCC_CSSWCR_LSISWBW, Value << RCC_CSSWCR_LSISWBW_Pos); + SET_BIT(RCC->CSSWCR, RCC_CSSWCR_LSISWTRIMEN); +} + +/** + * @brief Get LSI trimming value + * @rmtoll CSSWCR/ICSCR LSITRIM LL_RCC_LSI_GetTrimming + * @retval Between Min_Data = 0 and Max_Data = 15 + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_GetTrimming(void) +{ + if (READ_BIT(RCC->CSSWCR, RCC_CSSWCR_LSISWTRIMEN)) + { + return (uint32_t)(READ_BIT(RCC->CSSWCR, RCC_CSSWCR_LSISWBW) >> RCC_CSSWCR_LSISWBW_Pos); + } + else + { + return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_LSIBW) >> RCC_ICSCR_LSIBW_Pos); + } +} + +#if defined(RCC_ICSCR_LSITRIMOK) +/** + * @brief Check if LSI oscillator trimming is OK + * @rmtoll ICSCR LSITRIMOK LL_RCC_LSI_IsTrimmed + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSI_IsTrimmed(void) +{ + return ((READ_BIT(RCC->ICSCR, RCC_ICSCR_LSITRIMOK) == (RCC_ICSCR_LSITRIMOK)) ? 1UL : 0UL); +} +#endif + +/** + * @} + */ + + +/** @defgroup RCC_LL_EF_System System Clock + * @{ + */ + +/** + * @brief Configure the system clock source + * @rmtoll CR HSEON LL_RCC_SetSysClkSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SYS_HSI + * @arg @ref LL_RCC_SYS_HSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source) +{ + if (Source == LL_RCC_SYS_HSI) + { + CLEAR_BIT(RCC->CR, RCC_CR_HSEON); + } + if (Source == LL_RCC_SYS_HSE) + { + SET_BIT(RCC->CR, RCC_CR_HSEON); + } +} + +/** + * @brief Get the system clock source + * @rmtoll CR HSEON LL_RCC_GetSysClkSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SYS_HSI + * @arg @ref LL_RCC_SYS_HSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void) +{ + if (READ_BIT(RCC->CR, RCC_CR_HSEON)) + { + return LL_RCC_SYS_HSE; + } + + return LL_RCC_SYS_HSI; +} + +#if defined(RCC_APB2ENR_CLKBLEDIV) +/** + * @brief Set the RF clock frequency + * @rmtoll APB2ENR CLKBLEDIV LL_RCC_SetRFClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_RF_CLK_16M + * @arg @ref LL_RCC_RF_CLK_32M + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRFClock(uint32_t Source) +{ + MODIFY_REG(RCC->APB2ENR, RCC_APB2ENR_CLKBLEDIV, Source); +} + +/** + * @brief Get the RF clock frequency + * @rmtoll APB2ENR CLKBLEDIV LL_RCC_GetRFClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RF_CLK_16M + * @arg @ref LL_RCC_RF_CLK_32M + */ +__STATIC_INLINE uint32_t LL_RCC_GetRFClock(void) +{ + return (uint32_t)(READ_BIT(RCC->APB2ENR, RCC_APB2ENR_CLKBLEDIV)); +} +#endif + +#if defined(RCC_APB2RSTR_MRBLERST) +/** + * @brief Check if Radio System is reset. + * @rmtoll APB2RSTR MRBLERST LL_RCC_IsRFUnderReset + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsRFUnderReset(void) +{ + return ((READ_BIT(RCC->APB2RSTR, RCC_APB2RSTR_MRBLERST) == (RCC_APB2RSTR_MRBLERST)) ? 1UL : 0UL); +} +#endif +/** + * @} + */ + +/** @defgroup RCC_LL_EF_SMPS SMPS + * @{ + */ + +/** + * @brief Set SMPS prescaler + * @rmtoll CFGR SMPSDIV LL_RCC_SetSMPSPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_SMPS_DIV_2 + * @arg @ref LL_RCC_SMPS_DIV_4 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSMPSPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SMPSDIV, Prescaler); +} + +/** + * @brief Get SMPS prescaler + * @rmtoll CFGR SMPSDIV LL_RCC_GetSMPSPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SMPS_DIV_2 + * @arg @ref LL_RCC_SMPS_DIV_4 + */ +__STATIC_INLINE uint32_t LL_RCC_GetSMPSPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SMPSDIV)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_KRMR KRMR + * @{ + * + */ + +/** + * @brief Enable KRM + * @rmtoll KRMR KRM_EN LL_RCC_KRM_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_KRM_Enable(void) +{ + SET_BIT(RCC->KRMR, RCC_KRMR_KRM_EN); +} + +/** + * @brief Disable KRM + * @rmtoll KRMR KRM_EN LL_RCC_HSE_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_KRM_Disable(void) +{ + CLEAR_BIT(RCC->KRMR, RCC_KRMR_KRM_EN); +} + +/** + * @brief Check if KRM is enabled. + * @rmtoll KRMR KRM_EN LL_RCC_HSE_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_KRM_IsEnabled(void) +{ + return ((READ_BIT(RCC->KRMR, RCC_KRMR_KRM_EN) == (RCC_KRMR_KRM_EN)) ? 1UL : 0UL); +} + +/** + * @brief Set KRM rate multiplier for SMPS clock + * @rmtoll KRMR KRM LL_RCC_KRM_SetRateMultiplier + * @param Value Between Min_Data = 0 and Max_Data = 16 + * + * @retval None + */ +__STATIC_INLINE void LL_RCC_KRM_SetRateMultiplier(uint32_t Value) +{ + MODIFY_REG(RCC->KRMR, RCC_KRMR_KRM, Value << RCC_KRMR_KRM_Pos); +} + +/** + * @brief Get KRM rate multiplier for SMPS clock + * @rmtoll KRMR KRM LL_RCC_KRM_GetRateMultiplier + * + * @retval Between Min_Data = 0 and Max_Data = 16 + */ +__STATIC_INLINE uint32_t LL_RCC_KRM_GetRateMultiplier(void) +{ + return (uint32_t)(READ_BIT(RCC->KRMR, RCC_KRMR_KRM) >> RCC_KRMR_KRM_Pos); +} + +/** + * @} + */ + + +#if defined(RCC_CFGR_LPUCLKSEL) +/** @defgroup RCC_LL_CFGR_LPUCLK_SEL LPUART Clock Selection + * @{ + */ + +/** + * @brief Set LPUART Clock source + * @rmtoll CFGR LPUCLKSEL LL_RCC_SetLPUARTClockSource + * @param Source this parameter can be one of the following values: + * @arg @ref LL_RCC_LPUCLKSEL_CLK16M + * @arg @ref LL_RCC_LPUCLKSEL_CLKLSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_LPUCLKSEL, Source); +} + +/** + * @brief Get LPUART Clock source + * @rmtoll CFGR LPUCLKSEL LL_RCC_GetLPUARTClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_LPUCLKSEL_CLK16M + * @arg @ref LL_RCC_LPUCLKSEL_CLKLSE + */ +__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_LPUCLKSEL)); +} + +/** + * @} + */ +#endif /* RCC_CFGR_LPUCLKSEL */ + +/** @defgroup RCC_LL_EF_MCO_LSCO MCO/LSCO configuration + * @{ + */ + +/** + * @brief Configure MCOx + * @rmtoll CFGR MCOSEL LL_RCC_ConfigMCO\n + * CFGR CCOPRE LL_RCC_ConfigMCO + * @param MCOSource This parameter can be one of the following values: + * @arg @ref LL_RCC_MCOSOURCE_NOCLOCK + * @arg @ref LL_RCC_MCOSOURCE_SYSCLK + * @arg @ref LL_RCC_MCOSOURCE_HSI + * @arg @ref LL_RCC_MCOSOURCE_RC64MPLL + * @arg @ref LL_RCC_MCOSOURCE_HSE + * @arg @ref LL_RCC_MCOSOURCE_HSI64M_DIV2048 + * @arg @ref LL_RCC_MCOSOURCE_SMPS + * @arg @ref LL_RCC_MCOSOURCE_ADC + * @param MCOPrescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_MCO_DIV_1 + * @arg @ref LL_RCC_MCO_DIV_2 + * @arg @ref LL_RCC_MCO_DIV_4 + * @arg @ref LL_RCC_MCO_DIV_8 + * @arg @ref LL_RCC_MCO_DIV_16 + * @arg @ref LL_RCC_MCO_DIV_32 + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOSource, uint32_t MCOPrescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_CCOPRE, MCOSource | MCOPrescaler); +} + +/** + * @brief Configure LSCOx + * @rmtoll CFGR LCOSEL LL_RCC_ConfigLSCO + * @param LSCOSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LSCOSOURCE_NOCLOCK + * @arg @ref LL_RCC_LSCOSOURCE_LSI + * @arg @ref LL_RCC_LSCOSOURCE_LSE + * @retval None + */ +__STATIC_INLINE void LL_RCC_ConfigLSCO(uint32_t LSCOSource) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_LCOSEL, LSCOSource); +} + +#if defined(RCC_CFGR_LCOEN) +/** + * @brief LCO enabled on GPIA_Pin_10 also in deepstop + * @rmtoll CFGR LCOEN LL_RCC_LSCOinDeepStop_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCOinDeepStop_Enable(void) +{ + SET_BIT(RCC->CFGR, RCC_CFGR_LCOEN); +} + +/** + * @brief LCO disabled on GPIA_Pin_10 also in deepstop + * @rmtoll CFGR LCOEN LL_RCC_LSCOinDeepStop_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_LSCOinDeepStop_Disable(void) +{ + CLEAR_BIT(RCC->CFGR, RCC_CFGR_LCOEN); +} + +/** + * @brief Check if the LCO is enabled on PA10 in deepstop + * @rmtoll CFGR LCOEN LL_RCC_LSCOinDeepStop_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_LSCOinDeepStop_IsEnabled(void) +{ + return ((READ_BIT(RCC->CFGR, RCC_CFGR_LCOEN) == (RCC_CFGR_LCOEN)) ? 1UL : 0UL); +} + +/** + * @} + */ +#endif + +#if defined( RCC_CFGR_IOBOOSTEN) +/** @defgroup RCC_LL_EF_IOBOOST IOBOOSTER configuration + * @{ + */ +/** + * @brief IO BOOSTER enable + * @rmtoll CFGR IOBOOSTEN LL_RCC_IOBOOST_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_IOBOOST_Enable(void) +{ + SET_BIT(RCC->CFGR, RCC_CFGR_IOBOOSTEN); +} + +/** + * @brief IO BOOSTER disable + * @rmtoll CFGR IOBOOSTEN LL_RCC_IOBOOST_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_IOBOOST_Disable(void) +{ + CLEAR_BIT(RCC->CFGR, RCC_CFGR_IOBOOSTEN); +} + +/** + * @brief Check if the IO BOOSTER is enabled + * @rmtoll CFGR IOBOOSTEN LL_RCC_IOBOOST_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IOBOOST_IsEnabled(void) +{ + return ((READ_BIT(RCC->CFGR, RCC_CFGR_IOBOOSTEN) == (RCC_CFGR_IOBOOSTEN)) ? 1UL : 0UL); +} + +/** + * @} + */ +#endif + +/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source + * @{ + */ + +/** + * @brief Configure SPI3I2S clock source + * @rmtoll CFGR SPI3I2SCLKSEL LL_RCC_SetSPI3I2SClockSource + * @param Source This parameter can be one of the following values: + * @arg @ref LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT_DIV + * @arg @ref LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT + * @arg @ref LL_RCC_SPI3_I2S_CLKSOURCE_CLK_RC64MPLL + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetSPI3I2SClockSource(uint32_t Source) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_SPI3I2SCLKSEL, Source); +} + +/** + * @brief Get SPI3I2S clock source + * @rmtoll CFGR SPI3I2SCLKSEL LL_RCC_GetSPI3I2SClockSource + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT_DIV + * @arg @ref LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT + * @arg @ref LL_RCC_SPI3_I2S_CLKSOURCE_CLK_RC64MPLL + */ +__STATIC_INLINE uint32_t LL_RCC_GetSPI3I2SClockSource(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SPI3I2SCLKSEL)); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_RTC RTC + * @{ + */ + +/** + * @brief Enable RTC + * @rmtoll APB0ENR RTCEN LL_RCC_EnableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableRTC(void) +{ + SET_BIT(RCC->APB0ENR, RCC_APB0ENR_RTCEN); +} + +/** + * @brief Disable RTC + * @rmtoll APB0ENR RTCEN LL_RCC_DisableRTC + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableRTC(void) +{ + CLEAR_BIT(RCC->APB0ENR, RCC_APB0ENR_RTCEN); +} + +/** + * @brief Check if RTC has been enabled or not + * @rmtoll APB0ENR RTCEN LL_RCC_IsEnabledRTC + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void) +{ + return ((READ_BIT(RCC->APB0ENR, RCC_APB0ENR_RTCEN) == (RCC_APB0ENR_RTCEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_PLL PLL + * @{ + */ + +/** + * @brief Enable RC64MPLL + * @rmtoll CR HSIPLLON LL_RCC_RC64MPLL_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_RC64MPLL_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSIPLLON); +} + +/** + * @brief Disable RC64MPLL + * @note Cannot be disabled if the RC64MPLL clock is used as the system clock + * @rmtoll CR HSIPLLON LL_RCC_RC64MPLL_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_RC64MPLL_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSIPLLON); +} + +/** + * @brief Check if RC64MPLL is Ready + * @rmtoll CR HSIPLLRDY LL_RCC_RC64MPLL_IsReady + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_RC64MPLL_IsReady(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSIPLLRDY) == (RCC_CR_HSIPLLRDY)) ? 1UL : 0UL); +} + +/** + * @brief Set RC64MPLL prescaler + * @rmtoll CFGR CLKSYSDIV LL_RCC_SetRC64MPLLPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_RC64MPLL_DIV_1 + * @arg @ref LL_RCC_RC64MPLL_DIV_2 + * @arg @ref LL_RCC_RC64MPLL_DIV_4 + * @arg @ref LL_RCC_RC64MPLL_DIV_8 + * @arg @ref LL_RCC_RC64MPLL_DIV_16 + * @arg @ref LL_RCC_RC64MPLL_DIV_32 + * @arg @ref LL_RCC_RC64MPLL_DIV_64 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetRC64MPLLPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_CLKSYSDIV, Prescaler); +} + +/** + * @brief Get RC64MPLL prescaler + * @rmtoll CFGR CLKSYSDIV LL_RCC_GetRC64MPLLPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RC64MPLL_DIV_1 + * @arg @ref LL_RCC_RC64MPLL_DIV_2 + * @arg @ref LL_RCC_RC64MPLL_DIV_4 + * @arg @ref LL_RCC_RC64MPLL_DIV_8 + * @arg @ref LL_RCC_RC64MPLL_DIV_16 + * @arg @ref LL_RCC_RC64MPLL_DIV_32 + * @arg @ref LL_RCC_RC64MPLL_DIV_64 + */ +__STATIC_INLINE uint32_t LL_RCC_GetRC64MPLLPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_CLKSYSDIV)); +} + +#if defined(RCC_CFGR_CLKSYSDIV_STATUS) +/** + * @brief Get System Clock Prescaler Status + * @rmtoll CFGR CLKSYSDIV_STATUS LL_RCC_GetCLKSYSPrescalerStatus + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_RC64MPLL_DIV_1 + * @arg @ref LL_RCC_RC64MPLL_DIV_2 + * @arg @ref LL_RCC_RC64MPLL_DIV_4 + * @arg @ref LL_RCC_RC64MPLL_DIV_8 + * @arg @ref LL_RCC_RC64MPLL_DIV_16 + * @arg @ref LL_RCC_RC64MPLL_DIV_32 + * @arg @ref LL_RCC_RC64MPLL_DIV_64 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_1 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_2 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_3 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_6 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_12 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_48 + */ +__STATIC_INLINE uint32_t LL_RCC_GetCLKSYSPrescalerStatus(void) +{ + return (uint32_t)((READ_BIT(RCC->CFGR, RCC_CFGR_CLKSYSDIV_STATUS) >> RCC_CFGR_CLKSYSDIV_STATUS_Pos) << RCC_CFGR_CLKSYSDIV_Pos); +} +#endif + +/** + * @brief Set DIRECT_HSE prescaler + * @rmtoll CFGR CLKSYSDIV LL_RCC_SetDirectHSEPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_DIRECT_HSE_DIV_1 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_2 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_3 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_6 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_12 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_48 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SetDirectHSEPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CFGR, RCC_CFGR_CLKSYSDIV, Prescaler); +} + +/** + * @brief Get DIRECT_HSE prescaler + * @rmtoll CFGR CLKSYSDIV LL_RCC_GetDirectHSEPrescaler + * @retval Returned value can be one of the following values: + * @arg @ref LL_RCC_DIRECT_HSE_DIV_1 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_2 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_3 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_6 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_12 + * @arg @ref LL_RCC_DIRECT_HSE_DIV_48 + */ +__STATIC_INLINE uint32_t LL_RCC_GetDirectHSEPrescaler(void) +{ + return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_CLKSYSDIV)); +} +/** + * @} + */ + +/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Clear LSI ready interrupt flag + * @rmtoll CIFR LSIRDYF LL_RCC_ClearFlag_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_LSIRDYF); +} + +/** + * @brief Clear LSE ready interrupt flag + * @rmtoll CIFR LSERDYF LL_RCC_ClearFlag_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_LSERDYF); +} + +/** + * @brief Clear HSI ready interrupt flag + * @rmtoll CIFR HSIRDYF LL_RCC_ClearFlag_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_HSIRDYF); +} + +/** + * @brief Clear HSE ready interrupt flag + * @rmtoll CIFR HSERDYF LL_RCC_ClearFlag_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_HSERDYF); +} + +/** + * @brief Clear RC64MPLL ready interrupt flag + * @rmtoll CIFR HSIPLLRDYF LL_RCC_ClearFlag_RC64MPLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_RC64MPLLRDY(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_HSIPLLRDYF); +} + +/** + * @brief Clear RC64MPLL Unlock Detection interrupt flag + * @rmtoll CIFR HSIPLLUNLOCKDETF LL_RCC_ClearFlag_RC64MPLLUNLOCKDET + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_RC64MPLLUNLOCKDET(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_HSIPLLUNLOCKDETF); +} + +/** + * @brief Clear RTC Reset Release interrupt flag + * @rmtoll CIFR RTCRSTF LL_RCC_ClearFlag_RTCRRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_RTCRSTREL(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_RTCRSTF); +} + +/** + * @brief Clear Watchdog Reset Release interrupt flag + * @rmtoll CIFR WDGRSTF LL_RCC_ClearFlag_WDGRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_WDGRSTREL(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_WDGRSTF); +} + +#if defined(RCC_CIFR_LPURSTF) +/** + * @brief Clear LPUART Reset Release interrupt flag + * @rmtoll CIFR LPURSTF LL_RCC_ClearFlag_LPURSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LPURSTREL(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_LPURSTF); +} +#endif + +#if defined(RCC_CIFR_LCDRSTF) +/** + * @brief Clear LCD Reset Release interrupt flag + * @rmtoll CIFR LCDRSTF LL_RCC_ClearFlag_LCDRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LCDRSTREL(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_LCDRSTF); +} +#endif + +#if defined(RCC_CIFR_LCSCRSTF) +/** + * @brief Clear LCSC Reset Release interrupt flag + * @rmtoll CIFR LCSCRSTF LL_RCC_ClearFlag_LCSCRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_LCSCRSTREL(void) +{ + WRITE_REG(RCC->CIFR, RCC_CIFR_LCSCRSTF); +} +#endif + +/** + * @brief Check if LSI ready interrupt occurred or not + * @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == (RCC_CIFR_LSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if LSE ready interrupt occurred or not + * @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == (RCC_CIFR_LSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSI ready interrupt occurred or not + * @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == (RCC_CIFR_HSIRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if HSE ready interrupt occurred or not + * @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == (RCC_CIFR_HSERDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RC64MPLL ready interrupt occurred or not + * @rmtoll CIFR HSIPLLRDYF LL_RCC_IsActiveFlag_RC64MPLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_RC64MPLLRDY(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIPLLRDYF) == (RCC_CIFR_HSIPLLRDYF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RC64MPLL Unlock Detection flag interrupt occurred or not + * @rmtoll CIFR HSIPLLUNLOCKDETF LL_RCC_IsActiveFlag_RC64MPLLUNLOCKDET + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_RC64MPLLUNLOCKDET(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_HSIPLLUNLOCKDETF) == (RCC_CIFR_HSIPLLUNLOCKDETF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RTC Reset Release flag interrupt occurred or not + * @rmtoll CIFR RTCRSTF LL_RCC_IsActiveFlag_RTCRSTREL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_RTCRSTREL(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_RTCRSTF) == (RCC_CIFR_RTCRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if WDG Reset Release flag interrupt occurred or not + * @rmtoll CIFR WDGRSTF LL_RCC_IsActiveFlag_WDGRSTREL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WDGRSTREL(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_WDGRSTF) == (RCC_CIFR_WDGRSTF)) ? 1UL : 0UL); +} + +#if defined(RCC_CIFR_LPURSTF) +/** + * @brief Check if LPUART Reset Release flag interrupt occurred or not + * @rmtoll CIFR LPURSTF LL_RCC_IsActiveFlag_LPURSTREL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPURSTREL(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LPURSTF) == (RCC_CIFR_LPURSTF)) ? 1UL : 0UL); +} +#endif + +#if defined(RCC_CIFR_LCDRSTF) +/** + * @brief Check if LCD Reset Release flag interrupt occurred or not + * @rmtoll CIFR LCDRSTF LL_RCC_IsActiveFlag_LCDRSTREL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LCDRSTREL(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LCDRSTF) == (RCC_CIFR_LCDRSTF)) ? 1UL : 0UL); +} +#endif + +#if defined(RCC_CIFR_LCSCRSTF) +/** + * @brief Check if LCSC Reset Release flag interrupt occurred or not + * @rmtoll CIFR LCSCRSTF LL_RCC_IsActiveFlag_LCSCRSTREL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LCSCRSTREL(void) +{ + return ((READ_BIT(RCC->CIFR, RCC_CIFR_LCSCRSTF) == (RCC_CIFR_LCSCRSTF)) ? 1UL : 0UL); +} +#endif + +/** + * @brief Check if RCC flag CPU lockup reset is set or not. + * @rmtoll CSR LOCKUPRSTF LL_RCC_IsActiveFlag_LOCKUPRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LOCKUPRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_LOCKUPRSTF) == (RCC_CSR_LOCKUPRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Watchdog reset is set or not. + * @rmtoll CSR WDGRSTF LL_RCC_IsActiveFlag_WDGRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WDGRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_WDGRSTF) == (RCC_CSR_WDGRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Software reset is set or not. + * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag Power-On reset is set or not. + * @rmtoll CSR PORRSTF LL_RCC_IsActiveFlag_PORRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PORRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_PORRSTF) == (RCC_CSR_PORRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Check if RCC flag NRSTn pad reset is set or not. + * @rmtoll CSR PADRSTF LL_RCC_IsActiveFlag_PADRST + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PADRST(void) +{ + return ((READ_BIT(RCC->CSR, RCC_CSR_PADRSTF) == (RCC_CSR_PADRSTF)) ? 1UL : 0UL); +} + +/** + * @brief Set RMVF bit to clear the reset flags. + * @rmtoll CSR RMVF LL_RCC_ClearResetFlags + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearResetFlags(void) +{ + WRITE_REG(RCC->CSR, RCC_CSR_RMVF); +} + +/** + * @} + */ + +/** @defgroup RCC_LL_EF_CLK_SWITCH_Management Clock Switch Management + * @{ + */ + +/** + * @brief Set RC64MPLL prescaler to switch the clock when the MR_BLE or MR_SUBG or LPAWUR is enabled + * @rmtoll CSCMDR CLKSYSDIV_REQ LL_RCC_SwitchRC64MPLLPrescaler + * @param Prescaler This parameter can be one of the following values: + * @arg @ref LL_RCC_RC64MPLL_SWITCH_DIV_1 + * @arg @ref LL_RCC_RC64MPLL_SWITCH_DIV_2 + * @arg @ref LL_RCC_RC64MPLL_SWITCH_DIV_4 + * @retval None + */ +__STATIC_INLINE void LL_RCC_SwitchRC64MPLLPrescaler(uint32_t Prescaler) +{ + MODIFY_REG(RCC->CSCMDR, RCC_CSCMDR_CLKSYSDIV_REQ, Prescaler); +} + +/** + * @brief Request the RC64MPLL prescaler to switch the clock when the MR_BLE is enabled + * @rmtoll CSCMDR REQUEST LL_RCC_RequestSwitchRC64MPLLClock + * @retval None + */ +__STATIC_INLINE void LL_RCC_RequestSwitchRC64MPLLClock(void) +{ + SET_BIT(RCC->CSCMDR, RCC_CSCMDR_REQUEST); +} + +/** + * @brief Get RC64MPLL clock switch status + * @rmtoll CSCMDR STATUS LL_RCC_HSE_GetCapacitorTuning + * @retval The Clock switch status. Possible values are: + * @arg @ref LL_RCC_RC64MPLL_SWITCH_STATUS_IDLE + * @arg @ref LL_RCC_RC64MPLL_SWITCH_STATUS_ONGOING + * @arg @ref LL_RCC_RC64MPLL_SWITCH_STATUS_DONE + */ +__STATIC_INLINE uint32_t LL_RCC_GetRC64MPLLSwitchStatus(void) +{ + return (uint32_t)(READ_BIT(RCC->CSCMDR, RCC_CSCMDR_STATUS)); +} + +/** + * @brief Enable End of Switch Sequence interrupt + * @rmtoll CSCMDR EOFSEQ_IE LL_RCC_EnableIT_EOFSEQ + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_EOFSEQ(void) +{ + SET_BIT(RCC->CSCMDR, RCC_CSCMDR_EOFSEQ_IE); +} + +/** + * @brief Disable End of Switch Sequence interrupt + * @rmtoll CSCMDR EOFSEQ_IE LL_RCC_DisableIT_EOFSEQ + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_EOFSEQ(void) +{ + CLEAR_BIT(RCC->CSCMDR, RCC_CSCMDR_EOFSEQ_IE); +} + +/** + * @brief Checks if End of Switch Sequence interrupt source is enabled or disabled. + * @rmtoll CSCMDR EOFSEQ_IE LL_RCC_IsEnabledIT_EOFSEQ + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_EOFSEQ(void) +{ + return ((READ_BIT(RCC->CSCMDR, RCC_CSCMDR_EOFSEQ_IE) == (RCC_CSCMDR_EOFSEQ_IE)) ? 1UL : 0UL); +} + +/** + * @brief Clear End of Sequence interrupt flag + * @rmtoll CSCMDR EOFSEQ_IRQ LL_RCC_ClearFlag_EOFSEQ + * @retval None + */ +__STATIC_INLINE void LL_RCC_ClearFlag_EOFSEQ(void) +{ + WRITE_REG(RCC->CSCMDR, RCC_CSCMDR_EOFSEQ_IRQ); +} + +/** + * @brief Check if End of Sequence interrupt occurred or not + * @rmtoll CSCMDR EOFSEQ_IRQ LL_RCC_IsActiveFlag_EOFSEQ + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_EOFSEQ(void) +{ + return ((READ_BIT(RCC->CSCMDR, RCC_CSCMDR_EOFSEQ_IRQ) == (RCC_CSCMDR_EOFSEQ_IRQ)) ? 1UL : 0UL); +} +/** + * @} + */ + +/** @defgroup RCC_LL_EF_IT_Management IT Management + * @{ + */ + +/** + * @brief Enable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Enable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Enable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Enable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Enable RC64MPLL ready interrupt + * @rmtoll CIER HSIPLLRDYIE LL_RCC_EnableIT_RC64MPLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_RC64MPLLRDY(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIPLLRDYIE); +} + +/** + * @brief Enable RC64MPLL Unlock Detection interrupt + * @rmtoll CIER RCC_CIER_HSIPLLUNLOCKDETIE LL_RCC_EnableIT_RC64MPLLUNLOCKDET + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_RC64MPLLUNLOCKDET(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_HSIPLLUNLOCKDETIE); +} + +/** + * @brief Enable RTC Reset Release interrupt + * @rmtoll CIER RCC_CIER_RTCRSTIE LL_RCC_EnableIT_RTCRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_RTCRSTREL(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_RTCRSTIE); +} + +/** + * @brief Enable Watchdog Reset Release interrupt + * @rmtoll CIER RCC_CIER_WDGRSTIE LL_RCC_EnableIT_WDGRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_WDGRSTREL(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_WDGRSTIE); +} + +#if defined(RCC_CIER_LPURSTIE) +/** + * @brief Enable LPUART Reset Release interrupt + * @rmtoll CIER RCC_CIER_LPURSTIE LL_RCC_EnableIT_LPURSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LPURSTREL(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LPURSTIE); +} +#endif + +#if defined(RCC_CIER_LCDRSTIE) +/** + * @brief Enable LCD Reset Release interrupt + * @rmtoll CIER RCC_CIER_LCDRSTIE LL_RCC_EnableIT_LCDRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LCDRSTREL(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LCDRSTIE); +} +#endif + +#if defined(RCC_CIER_LCSCRSTIE) +/** + * @brief Enable LCSC Reset Release interrupt + * @rmtoll CIER RCC_CIER_LCSCRSTIE LL_RCC_EnableIT_LCSCRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_EnableIT_LCSCRSTREL(void) +{ + SET_BIT(RCC->CIER, RCC_CIER_LCSCRSTIE); +} +#endif + +/** + * @brief Disable LSI ready interrupt + * @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE); +} + +/** + * @brief Disable LSE ready interrupt + * @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE); +} + +/** + * @brief Disable HSI ready interrupt + * @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE); +} + +/** + * @brief Disable HSE ready interrupt + * @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE); +} + +/** + * @brief Disable RC64MPLL ready interrupt + * @rmtoll CIER HSIPLLRDYIE LL_RCC_DisableIT_RC64MPLLRDY + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_RC64MPLLRDY(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIPLLRDYIE); +} + +/** + * @brief Disable RC64MPLL Unlock Detection interrupt + * @rmtoll CIER RCC_CIER_HSIPLLUNLOCKDETIE LL_RCC_DisableIT_RC64MPLLUNLOCKDET + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_RC64MPLLUNLOCKDET(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_HSIPLLUNLOCKDETIE); +} + +/** + * @brief Disable RTC Reset Release interrupt + * @rmtoll CIER RCC_CIER_RTCRSTIE LL_RCC_DisableIT_RTCRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_RTCRSTREL(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_RTCRSTIE); +} + +/** + * @brief Disable Watchdog Reset Release interrupt + * @rmtoll CIER RCC_CIER_WDGRSTIE LL_RCC_DisableIT_WDGRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_WDGRSTREL(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_WDGRSTIE); +} + +#if defined(RCC_CIER_LPURSTIE) +/** + * @brief Disable LPUART Reset Release interrupt + * @rmtoll CIER RCC_CIER_LPURSTIE LL_RCC_DisableIT_LPURSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LPURSTREL(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LPURSTIE); +} +#endif + +#if defined(RCC_CIER_LCDRSTIE) +/** + * @brief Disable LCD Reset Release interrupt + * @rmtoll CIER RCC_CIER_LCDRSTIE LL_RCC_DisableIT_LCDRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LCDRSTREL(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LCDRSTIE); +} +#endif + +#if defined(RCC_CIER_LCSCRSTIE) +/** + * @brief Disable LCSC Reset Release interrupt + * @rmtoll CIER RCC_CIER_LCSCRSTIE LL_RCC_DisableIT_LCSCRSTREL + * @retval None + */ +__STATIC_INLINE void LL_RCC_DisableIT_LCSCRSTREL(void) +{ + CLEAR_BIT(RCC->CIER, RCC_CIER_LCSCRSTIE); +} +#endif + +/** + * @brief Checks if LSI ready interrupt source is enabled or disabled. + * @rmtoll CIER LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == (RCC_CIER_LSIRDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if LSE ready interrupt source is enabled or disabled. + * @rmtoll CIER LSERDYIE LL_RCC_IsEnabledIT_LSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == (RCC_CIER_LSERDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSI ready interrupt source is enabled or disabled. + * @rmtoll CIER HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == (RCC_CIER_HSIRDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if HSE ready interrupt source is enabled or disabled. + * @rmtoll CIER HSERDYIE LL_RCC_IsEnabledIT_HSERDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == (RCC_CIER_HSERDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if RC64MPLL ready interrupt source is enabled or disabled. + * @rmtoll CIER HSIPLLRDYIE LL_RCC_IsEnabledIT_RC64MPLLRDY + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_RC64MPLLRDY(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIPLLRDYIE) == (RCC_CIER_HSIPLLRDYIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if RC64MPLL Unlock Detection interrupt source is enabled or disabled. + * @rmtoll CIER RCC_CIER_HSIPLLUNLOCKDETIE LL_RCC_IsEnabledIT_RC64MPLLUNLOCKDET + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_RC64MPLLUNLOCKDET(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_HSIPLLUNLOCKDETIE) == (RCC_CIER_HSIPLLUNLOCKDETIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if RTC Reset Release interrupt source is enabled or disabled. + * @rmtoll CIER RCC_CIER_RTCRSTIE LL_RCC_IsEnabledIT_RTCRSTREL + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_RTCRSTREL(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_RTCRSTIE) == (RCC_CIER_RTCRSTIE)) ? 1UL : 0UL); +} + +/** + * @brief Checks if Watchdog Reset Release interrupt source is enabled or disabled. + * @rmtoll CIER RCC_CIER_WDGRSTIE LL_RCC_IsEnabledIT_WDGRSTREL + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_WDGRSTREL(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_WDGRSTIE) == (RCC_CIER_WDGRSTIE)) ? 1UL : 0UL); +} + +#if defined(RCC_CIER_LPURSTIE) +/** + * @brief Checks if LPUART Reset Release interrupt source is enabled or disabled. + * @rmtoll CIER RCC_CIER_LPURSTIE LL_RCC_IsEnabledIT_LPURSTREL + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LPURSTREL(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LPURSTIE) == (RCC_CIER_LPURSTIE)) ? 1UL : 0UL); +} +#endif + +#if defined(RCC_CIER_LCDRSTIE) +/** + * @brief Checks if LCD Reset Release interrupt source is enabled or disabled. + * @rmtoll CIER RCC_CIER_LCDRSTIE LL_RCC_IsEnabledIT_LCDRSTREL + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LCDRSTREL(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LCDRSTIE) == (RCC_CIER_LCDRSTIE)) ? 1UL : 0UL); +} +#endif + +#if defined(RCC_CIER_LCSCRSTIE) +/** + * @brief Checks if LCSC Reset Release interrupt source is enabled or disabled. + * @rmtoll CIER RCC_CIER_LCSCRSTIE LL_RCC_IsEnabledIT_LCSCRSTREL + * @retval None + */ +__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LCSCRSTREL(void) +{ + return ((READ_BIT(RCC->CIER, RCC_CIER_LCSCRSTIE) == (RCC_CIER_LCSCRSTIE)) ? 1UL : 0UL); +} +#endif + +/** + * @} + */ + +/** @defgroup RCC_LL_HSEPLL_BUFFER_RF External high speed clock buffer for PLL RF2G4 + * @{ + */ + +/** + * @brief Enable high speed clock buffer for PLL RF2G4 + * @rmtoll CR HSEPLLBUFON LL_RCC_HSEPLLBUFON_Enable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSEPLLBUFON_Enable(void) +{ + SET_BIT(RCC->CR, RCC_CR_HSEPLLBUFON); +} + +/** + * @brief Disable high speed clock buffer for PLL RF2G4 + * @rmtoll CR HSEPLLBUFON LL_RCC_HSEPLLBUFON_Disable + * @retval None + */ +__STATIC_INLINE void LL_RCC_HSEPLLBUFON_Disable(void) +{ + CLEAR_BIT(RCC->CR, RCC_CR_HSEPLLBUFON); +} + +/** + * @brief Check if the high speed clock buffer for PLL RF2G4 is enabled. + * @rmtoll CR HSEPLLBUFON LL_RCC_HSEPLLBUFON_IsEnabled + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RCC_HSEPLLBUFON_IsEnabled(void) +{ + return ((READ_BIT(RCC->CR, RCC_CR_HSEPLLBUFON) == (RCC_CR_HSEPLLBUFON)) ? 1UL : 0UL); +} +/** + * @} + */ + + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RCC_LL_EF_Init De-initialization function + * @{ + */ +ErrorStatus LL_RCC_DeInit(void); +/** + * @} + */ + +/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions + * @{ + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks); +uint32_t LL_RCC_GetSMPSClockFreq(void); +#if defined(RCC_CFGR_LPUCLKSEL) +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource); +#endif /* RCC_CFGR_LPUCLKSEL */ +uint32_t LL_RCC_GetSPIClockFreq(uint32_t SPIxSource); + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* STM32WL3x_LL_RCC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_rng.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_rng.h new file mode 100644 index 0000000000..a97ef68fa7 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_rng.h @@ -0,0 +1,296 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_rng.h + * @author MCD Application Team + * @brief Header file of RNG LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_RNG_H +#define STM32WL3x_LL_RNG_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (RNG) +/** @defgroup RNG_LL RNG + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RNG_LL_ES_Init_Struct RNG Exported Init structures + * @{ + */ + +/** + * @brief LL RNG Init Structure Definition + */ +typedef struct +{ + uint32_t ClockDetection; /*!< RNG Clock detection. + This parameter can be modified using unitary functions @ref + LL_RNG_EnableClkDetect(). */ +} LL_RNG_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Constants RNG Exported Constants + * @{ + */ + +/** @defgroup RNG_LL_CLK_DET Logic that detects the presence of the RNG Clock + * @{ + */ +#define LL_RNG_CLK_DET_DISABLE 0x00000000U /*!< RNG Clock detection disabled */ +#define LL_RNG_CLK_DET_ENABLE RNG_CR_TST_CLK /*!< RNG Clock detection enabled */ +/** + * @} + */ + +/** @defgroup RNG_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RNG_ReadReg function + * @{ + */ +#define LL_RNG_SR_RNGRDY RNG_SR_RNGRDY /*!< Register contains valid random data */ +#define LL_RNG_SR_REVCLK RNG_SR_REVCLK /*!< Clock Reveal bit */ +#define LL_RNG_SR_FAULT RNG_SR_FAULT /*!< Fault Reveal bit */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Macros RNG Exported Macros + * @{ + */ + +/** @defgroup RNG_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RNG register + * @param __INSTANCE__ RNG Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RNG_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RNG register + * @param __INSTANCE__ RNG Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RNG_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RNG_LL_Exported_Functions RNG Exported Functions + * @{ + */ +/** @defgroup RNG_LL_EF_Configuration RNG Configuration functions + * @{ + */ + +/** + * @brief Enable Random Number Generation + * @rmtoll CR RNG_DIS LL_RNG_Enable + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_Enable(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_RNG_DIS); +} + +/** + * @brief Disable Random Number Generation + * @rmtoll CR RNG_DIS LL_RNG_Disable + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_Disable(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_RNG_DIS); +} + +/** + * @brief Check if Random Number Generator is enabled + * @rmtoll CR RNG_DIS LL_RNG_IsEnabled + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsEnabled(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->CR, RNG_CR_RNG_DIS) != (RNG_CR_RNG_DIS)) ? 1UL : 0UL); +} + +/** + * @brief Enable RNG Clock detection + * @rmtoll CR TST_CLK LL_RNG_EnableClkDetect + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_EnableClkDetect(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->CR, RNG_CR_TST_CLK); +} + +/** + * @brief Disable RNG Clock detection + * @rmtoll CR TST_CLK LL_RNG_DisableClkDetect + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_DisableClkDetect(RNG_TypeDef *RNGx) +{ + CLEAR_BIT(RNGx->CR, RNG_CR_TST_CLK); +} + +/** + * @} + */ + +/** @defgroup RNG_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Indicate if the RNG value ready Flag is set or not + * @rmtoll SR RNGRDY LL_RNG_IsActiveFlag_RNGRDY + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_RNGRDY(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_RNGRDY) == (RNG_SR_RNGRDY)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Clock Reveal Status Flag is set or not + * @rmtoll SR REVCLK LL_RNG_IsActiveFlag_REVCLK + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_REVCLK(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_REVCLK) == (RNG_SR_REVCLK)) ? 1UL : 0UL); +} + +/** + * @brief Indicate if the Fault Reveal Flag is set or not + * @rmtoll SR FAULT LL_RNG_IsActiveFlag_FAULT + * @param RNGx RNG Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RNG_IsActiveFlag_FAULT(RNG_TypeDef *RNGx) +{ + return ((READ_BIT(RNGx->SR, RNG_SR_FAULT) == (RNG_SR_FAULT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Fault Reveal Flag Flag + * @rmtoll SR FAULT LL_RNG_ClearFlag_FAULT + * @param RNGx RNG Instance + * @retval None + */ +__STATIC_INLINE void LL_RNG_ClearFlag_FAULT(RNG_TypeDef *RNGx) +{ + SET_BIT(RNGx->SR, RNG_SR_FAULT); +} + +/** + * @} + */ + +/** @defgroup RNG_LL_EF_Data_Management Data Management + * @{ + */ + +/** + * @brief Return16-bit Random Number value + * @rmtoll DR RNDATA LL_RNG_ReadRandData16 + * @param RNGx RNG Instance + * @retval Generated 16-bit random value + */ +__STATIC_INLINE uint16_t LL_RNG_ReadRandData16(RNG_TypeDef *RNGx) +{ + return (uint16_t)(READ_REG(RNGx->VAL)); +} + +/** + * @} + */ + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RNG_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_RNG_Init(RNG_TypeDef *RNGx, LL_RNG_InitTypeDef *RNG_InitStruct); +void LL_RNG_StructInit(LL_RNG_InitTypeDef *RNG_InitStruct); +ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ +#endif /* RNG */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32WL3x_LL_RNG_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_rtc.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_rtc.h new file mode 100644 index 0000000000..3341387895 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_rtc.h @@ -0,0 +1,3075 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_rtc.h + * @author MCD Application Team + * @brief Header file of RTC LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_RTC_H +#define STM32WL3x_LL_RTC_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @defgroup RTC_LL RTC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RTC_LL_Private_Constants RTC Private Constants + * @{ + */ +/* Masks Definition */ +#define RTC_INIT_MASK 0xFFFFFFFFU +#define RTC_RSF_MASK ((uint32_t)~(RTC_ISR_INIT | RTC_ISR_RSF)) + +/* Write protection defines */ +#define RTC_WRITE_PROTECTION_DISABLE ((uint8_t)0xFFU) +#define RTC_WRITE_PROTECTION_ENABLE_1 ((uint8_t)0xCAU) +#define RTC_WRITE_PROTECTION_ENABLE_2 ((uint8_t)0x53U) + +/* Defines used to combine date & time */ +#define RTC_OFFSET_WEEKDAY 24U +#define RTC_OFFSET_DAY 16U +#define RTC_OFFSET_MONTH 8U +#define RTC_OFFSET_HOUR 16U +#define RTC_OFFSET_MINUTE 8U + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_Private_Macros RTC Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_ES_INIT RTC Exported Init structure + * @{ + */ + +/** + * @brief RTC Init structures definition + */ +typedef struct +{ + uint32_t HourFormat; /*!< Specifies the RTC Hours Format. + This parameter can be a value of @ref RTC_LL_EC_HOURFORMAT + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetHourFormat(). */ + + uint32_t AsynchPrescaler; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetAsynchPrescaler(). */ + + uint32_t SynchPrescaler; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF + + This feature can be modified afterwards using unitary function + @ref LL_RTC_SetSynchPrescaler(). */ +} LL_RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint32_t TimeFormat; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_LL_EC_TIME_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetFormat(). */ + + uint8_t Hours; /*!< Specifies the RTC Time Hours. + This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the @ref LL_RTC_TIME_FORMAT_PM is selected. + This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the @ref LL_RTC_TIME_FORMAT_AM_OR_24 is selected. + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetHour(). */ + + uint8_t Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetMinute(). */ + + uint8_t Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be a number between Min_Data = 0 and Max_Data = 59 + + This feature can be modified afterwards using unitary function @ref LL_RTC_TIME_SetSecond(). */ +} LL_RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_LL_EC_WEEKDAY + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetWeekDay(). */ + + uint8_t Month; /*!< Specifies the RTC Date Month. + This parameter can be a value of @ref RTC_LL_EC_MONTH + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetMonth(). */ + + uint8_t Day; /*!< Specifies the RTC Date Day. + This parameter must be a number between Min_Data = 1 and Max_Data = 31 + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetDay(). */ + + uint8_t Year; /*!< Specifies the RTC Date Year. + This parameter must be a number between Min_Data = 0 and Max_Data = 99 + + This feature can be modified afterwards using unitary function @ref LL_RTC_DATE_SetYear(). */ +} LL_RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + LL_RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members. */ + + uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_LL_EC_ALMA_MASK for ALARM A. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetMask(). + */ + + uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on day or WeekDay. + This parameter can be a value of @ref RTC_LL_EC_ALMA_WEEKDAY_SELECTION for ALARM A. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_EnableWeekday() or @ref LL_RTC_ALMA_DisableWeekday(). + */ + + uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Day/WeekDay. + If AlarmDateWeekDaySel set to day, this parameter must be a number between Min_Data = 1 and Max_Data = 31. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetDay(). + + If AlarmDateWeekDaySel set to Weekday, this parameter can be a value of @ref RTC_LL_EC_WEEKDAY. + + This feature can be modified afterwards using unitary function @ref LL_RTC_ALMA_SetWeekDay(). + */ +} LL_RTC_AlarmTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Constants RTC Exported Constants + * @{ + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EC_FORMAT FORMAT + * @{ + */ +#define LL_RTC_FORMAT_BIN 0x00000000U /*!< Binary data format */ +#define LL_RTC_FORMAT_BCD 0x00000001U /*!< BCD data format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_WEEKDAY_SELECTION RTC Alarm A Date WeekDay + * @{ + */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_DATE 0x00000000U /*!< Alarm A Date is selected */ +#define LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY RTC_ALRMAR_WDSEL /*!< Alarm A WeekDay is selected */ +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup RTC_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_RTC_ReadReg function + * @{ + */ +#define LL_RTC_ISR_ITSF RTC_ISR_ITSF +#define LL_RTC_ISR_RECALPF RTC_ISR_RECALPF +#define LL_RTC_ISR_TAMP1F RTC_ISR_TAMP1F +#define LL_RTC_ISR_TSOVF RTC_ISR_TSOVF +#define LL_RTC_ISR_TSF RTC_ISR_TSF +#define LL_RTC_ISR_WUTF RTC_ISR_WUTF +#define LL_RTC_ISR_ALRAF RTC_ISR_ALRAF +#define LL_RTC_ISR_INITF RTC_ISR_INITF +#define LL_RTC_ISR_RSF RTC_ISR_RSF +#define LL_RTC_ISR_INITS RTC_ISR_INITS +#define LL_RTC_ISR_SHPF RTC_ISR_SHPF +#define LL_RTC_ISR_WUTWF RTC_ISR_WUTWF +#define LL_RTC_ISR_ALRAWF RTC_ISR_ALRAWF +/** + * @} + */ + +/** @defgroup RTC_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_RTC_ReadReg and LL_RTC_WriteReg functions + * @{ + */ +#define LL_RTC_CR_TSIE RTC_CR_TSIE +#define LL_RTC_CR_WUTIE RTC_CR_WUTIE +#define LL_RTC_CR_ALRAIE RTC_CR_ALRAIE +#define LL_RTC_TAMPCR_TAMP1IE RTC_TAMPCR_TAMP1IE +#define LL_RTC_TAMPCR_TAMPIE RTC_TAMPCR_TAMPIE +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WEEKDAY WEEK DAY + * @{ + */ +#define LL_RTC_WEEKDAY_MONDAY ((uint8_t)0x01U) /*!< Monday */ +#define LL_RTC_WEEKDAY_TUESDAY ((uint8_t)0x02U) /*!< Tuesday */ +#define LL_RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03U) /*!< Wednesday */ +#define LL_RTC_WEEKDAY_THURSDAY ((uint8_t)0x04U) /*!< Thrusday */ +#define LL_RTC_WEEKDAY_FRIDAY ((uint8_t)0x05U) /*!< Friday */ +#define LL_RTC_WEEKDAY_SATURDAY ((uint8_t)0x06U) /*!< Saturday */ +#define LL_RTC_WEEKDAY_SUNDAY ((uint8_t)0x07U) /*!< Sunday */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_MONTH MONTH + * @{ + */ +#define LL_RTC_MONTH_JANUARY ((uint8_t)0x01U) /*!< January */ +#define LL_RTC_MONTH_FEBRUARY ((uint8_t)0x02U) /*!< February */ +#define LL_RTC_MONTH_MARCH ((uint8_t)0x03U) /*!< March */ +#define LL_RTC_MONTH_APRIL ((uint8_t)0x04U) /*!< April */ +#define LL_RTC_MONTH_MAY ((uint8_t)0x05U) /*!< May */ +#define LL_RTC_MONTH_JUNE ((uint8_t)0x06U) /*!< June */ +#define LL_RTC_MONTH_JULY ((uint8_t)0x07U) /*!< July */ +#define LL_RTC_MONTH_AUGUST ((uint8_t)0x08U) /*!< August */ +#define LL_RTC_MONTH_SEPTEMBER ((uint8_t)0x09U) /*!< September */ +#define LL_RTC_MONTH_OCTOBER ((uint8_t)0x10U) /*!< October */ +#define LL_RTC_MONTH_NOVEMBER ((uint8_t)0x11U) /*!< November */ +#define LL_RTC_MONTH_DECEMBER ((uint8_t)0x12U) /*!< December */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_HOURFORMAT HOUR FORMAT + * @{ + */ +#define LL_RTC_HOURFORMAT_24HOUR 0x00000000U /*!< 24 hour/day format */ +#define LL_RTC_HOURFORMAT_AMPM RTC_CR_FMT /*!< AM/PM hour format */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALARMOUT ALARM OUTPUT + * @{ + */ +#define LL_RTC_ALARMOUT_DISABLE 0x00000000U /*!< Output disabled */ +#define LL_RTC_ALARMOUT_ALMA RTC_CR_OSEL_0 /*!< Alarm A output enabled */ +#define LL_RTC_ALARMOUT_ALMB RTC_CR_OSEL_1 /*!< Alarm B output enabled */ +#define LL_RTC_ALARMOUT_WAKEUP RTC_CR_OSEL /*!< Wakeup output enabled */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALARM_OUTPUTTYPE ALARM OUTPUT TYPE + * @{ + */ +#define LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN 0x00000000U /*!< RTC_ALARM, when mapped on PC13, is open-drain output */ +#define LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL RTC_OR_ALARMOUTTYPE /*!< RTC_ALARM, when mapped on PC13, is push-pull output */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_OUTPUTPOLARITY_PIN OUTPUT POLARITY PIN + * @{ + */ +#define LL_RTC_OUTPUTPOLARITY_PIN_HIGH 0x00000000U /*!< Pin is high when ALRAF/ALRBF/WUTF is asserted (depending on OSEL)*/ +#define LL_RTC_OUTPUTPOLARITY_PIN_LOW RTC_CR_POL /*!< Pin is low when ALRAF/ALRBF/WUTF is asserted (depending on OSEL) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIME_FORMAT TIME FORMAT + * @{ + */ +#define LL_RTC_TIME_FORMAT_AM_OR_24 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_TIME_FORMAT_PM RTC_TR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_SHIFT_SECOND SHIFT SECOND + * @{ + */ +#define LL_RTC_SHIFT_SECOND_DELAY 0x00000000U /* Delay (seconds) = SUBFS / (PREDIV_S + 1) */ +#define LL_RTC_SHIFT_SECOND_ADVANCE RTC_SHIFTR_ADD1S /* Advance (seconds) = (1 - (SUBFS / (PREDIV_S + 1))) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_MASK ALARMA MASK + * @{ + */ +#define LL_RTC_ALMA_MASK_NONE 0x00000000U /*!< No masks applied on Alarm A*/ +#define LL_RTC_ALMA_MASK_DATEWEEKDAY RTC_ALRMAR_MSK4 /*!< Date/day do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_HOURS RTC_ALRMAR_MSK3 /*!< Hours do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_MINUTES RTC_ALRMAR_MSK2 /*!< Minutes do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_SECONDS RTC_ALRMAR_MSK1 /*!< Seconds do not care in Alarm A comparison */ +#define LL_RTC_ALMA_MASK_ALL (RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1) /*!< Masks all */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_ALMA_TIME_FORMAT ALARMA TIME FORMAT + * @{ + */ +#define LL_RTC_ALMA_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_ALMA_TIME_FORMAT_PM RTC_ALRMAR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TIMESTAMP_EDGE TIMESTAMP EDGE + * @{ + */ +#define LL_RTC_TIMESTAMP_EDGE_RISING 0x00000000U /*!< RTC_TS input rising edge generates a time-stamp event */ +#define LL_RTC_TIMESTAMP_EDGE_FALLING RTC_CR_TSEDGE /*!< RTC_TS input falling edge generates a time-stamp event */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TS_TIME_FORMAT TIMESTAMP TIME FORMAT + * @{ + */ +#define LL_RTC_TS_TIME_FORMAT_AM 0x00000000U /*!< AM or 24-hour format */ +#define LL_RTC_TS_TIME_FORMAT_PM RTC_TSTR_PM /*!< PM */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER TAMPER + * @{ + */ +#define LL_RTC_TAMPER_1 RTC_TAMPCR_TAMP1E /*!< RTC_TAMP1 input detection */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_MASK TAMPER MASK + * @{ + */ +#define LL_RTC_TAMPER_MASK_TAMPER1 RTC_TAMPCR_TAMP1MF /*!< Tamper 1 event generates a trigger event. TAMP1F is masked and internally cleared by hardware.The backup registers are not erased */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_NOERASE TAMPER NO ERASE + * @{ + */ +#define LL_RTC_TAMPER_NOERASE_TAMPER1 RTC_TAMPCR_TAMP1NOERASE /*!< Tamper 1 event does not erase the backup registers. */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_DURATION TAMPER DURATION + * @{ + */ +#define LL_RTC_TAMPER_DURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ +#define LL_RTC_TAMPER_DURATION_2RTCCLK RTC_TAMPCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ +#define LL_RTC_TAMPER_DURATION_4RTCCLK RTC_TAMPCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ +#define LL_RTC_TAMPER_DURATION_8RTCCLK RTC_TAMPCR_TAMPPRCH /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_FILTER TAMPER FILTER + * @{ + */ +#define LL_RTC_TAMPER_FILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ +#define LL_RTC_TAMPER_FILTER_2SAMPLE RTC_TAMPCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */ +#define LL_RTC_TAMPER_FILTER_4SAMPLE RTC_TAMPCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */ +#define LL_RTC_TAMPER_FILTER_8SAMPLE RTC_TAMPCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level. */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_SAMPLFREQDIV TAMPER SAMPLING FREQUENCY DIVIDER + * @{ + */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_32768 0x00000000U /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_16384 RTC_TAMPCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_8192 RTC_TAMPCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_4096 (RTC_TAMPCR_TAMPFREQ_1 | RTC_TAMPCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_2048 RTC_TAMPCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_1024 (RTC_TAMPCR_TAMPFREQ_2 | RTC_TAMPCR_TAMPFREQ_0) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_512 (RTC_TAMPCR_TAMPFREQ_2 | RTC_TAMPCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ +#define LL_RTC_TAMPER_SAMPLFREQDIV_256 RTC_TAMPCR_TAMPFREQ /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_TAMPER_ACTIVELEVEL TAMPER ACTIVE LEVEL + * @{ + */ +#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 RTC_TAMPCR_TAMP1TRG /*!< RTC_TAMP1 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_WAKEUPCLOCK_DIV WAKEUP CLOCK DIV + * @{ + */ +#define LL_RTC_WAKEUPCLOCK_DIV_16 0x00000000U /*!< RTC/16 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_8 (RTC_CR_WUCKSEL_0) /*!< RTC/8 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_4 (RTC_CR_WUCKSEL_1) /*!< RTC/4 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_DIV_2 (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_0) /*!< RTC/2 clock is selected */ +#define LL_RTC_WAKEUPCLOCK_CKSPRE (RTC_CR_WUCKSEL_2) /*!< ck_spre (usually 1 Hz) clock is selected */ +#define LL_RTC_WAKEUPCLOCK_CKSPRE_WUT (RTC_CR_WUCKSEL_2 | RTC_CR_WUCKSEL_1) /*!< ck_spre (usually 1 Hz) clock is selected and 2exp16 is added to the WUT counter value*/ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_BKP BACKUP + * @{ + */ +#define LL_RTC_BKP_DR0 0x00000000U +#define LL_RTC_BKP_DR1 0x00000001U +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_OUTPUT Calibration output + * @{ + */ +#define LL_RTC_CALIB_OUTPUT_NONE 0x00000000U /*!< Calibration output disabled */ +#define LL_RTC_CALIB_OUTPUT_1HZ (RTC_CR_COE | RTC_CR_COSEL) /*!< Calibration output is 1 Hz */ +#define LL_RTC_CALIB_OUTPUT_512HZ (RTC_CR_COE) /*!< Calibration output is 512 Hz */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_INSERTPULSE Calibration pulse insertion + * @{ + */ +#define LL_RTC_CALIB_INSERTPULSE_NONE 0x00000000U /*!< No RTCCLK pulses are added */ +#define LL_RTC_CALIB_INSERTPULSE_SET RTC_CALR_CALP /*!< One RTCCLK pulse is effectively inserted every 2exp11 pulses (frequency increased by 488.5 ppm) */ +/** + * @} + */ + +/** @defgroup RTC_LL_EC_CALIB_PERIOD Calibration period + * @{ + */ +#define LL_RTC_CALIB_PERIOD_32SEC 0x00000000U /*!< Use a 32-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< Use a 16-second calibration cycle period */ +#define LL_RTC_CALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< Use a 8-second calibration cycle period */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Macros RTC Exported Macros + * @{ + */ + +/** @defgroup RTC_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_RTC_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in RTC register + * @param __INSTANCE__ RTC Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_RTC_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Convert Convert helper Macros + * @{ + */ + +/** + * @brief Helper macro to convert a value from 2 digit decimal format to BCD format + * @param __VALUE__ Byte to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BIN2BCD(__VALUE__) (uint8_t)((((__VALUE__) / 10U) << 4U) | ((__VALUE__) % 10U)) + +/** + * @brief Helper macro to convert a value from BCD format to 2 digit decimal format + * @param __VALUE__ BCD value to be converted + * @retval Converted byte + */ +#define __LL_RTC_CONVERT_BCD2BIN(__VALUE__) (uint8_t)(((uint8_t)((__VALUE__) & (uint8_t)0xF0U) >> (uint8_t)0x4U) * 10U + ((__VALUE__) & (uint8_t)0x0FU)) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Date Date helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve weekday. + * @param __RTC_DATE__ Date returned by @ref LL_RTC_DATE_Get function. + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +#define __LL_RTC_GET_WEEKDAY(__RTC_DATE__) (((__RTC_DATE__) >> RTC_OFFSET_WEEKDAY) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Year in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Year in BCD format (0x00 . . . 0x99) + */ +#define __LL_RTC_GET_YEAR(__RTC_DATE__) ((__RTC_DATE__) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Month in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +#define __LL_RTC_GET_MONTH(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_MONTH) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve Day in BCD format + * @param __RTC_DATE__ Value returned by @ref LL_RTC_DATE_Get + * @retval Day in BCD format (0x01 . . . 0x31) + */ +#define __LL_RTC_GET_DAY(__RTC_DATE__) (((__RTC_DATE__) >>RTC_OFFSET_DAY) & 0x000000FFU) + +/** + * @} + */ + +/** @defgroup RTC_LL_EM_Time Time helper Macros + * @{ + */ + +/** + * @brief Helper macro to retrieve hour in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Hours in BCD format (0x01. . .0x12 or between Min_Data=0x00 and Max_Data=0x23) + */ +#define __LL_RTC_GET_HOUR(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_HOUR) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve minute in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Minutes in BCD format (0x00. . .0x59) + */ +#define __LL_RTC_GET_MINUTE(__RTC_TIME__) (((__RTC_TIME__) >> RTC_OFFSET_MINUTE) & 0x000000FFU) + +/** + * @brief Helper macro to retrieve second in BCD format + * @param __RTC_TIME__ RTC time returned by @ref LL_RTC_TIME_Get function + * @retval Seconds in format (0x00. . .0x59) + */ +#define __LL_RTC_GET_SECOND(__RTC_TIME__) ((__RTC_TIME__) & 0x000000FFU) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup RTC_LL_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Set Hours format (24 hour/day or AM/PM hour format) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll CR FMT LL_RTC_SetHourFormat + * @param RTCx RTC Instance + * @param HourFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetHourFormat(RTC_TypeDef *RTCx, uint32_t HourFormat) +{ + MODIFY_REG(RTCx->CR, RTC_CR_FMT, HourFormat); +} + +/** + * @brief Get Hours format (24 hour/day or AM/PM hour format) + * @rmtoll CR FMT LL_RTC_GetHourFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_HOURFORMAT_24HOUR + * @arg @ref LL_RTC_HOURFORMAT_AMPM + */ +__STATIC_INLINE uint32_t LL_RTC_GetHourFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_FMT)); +} + +/** + * @brief Select the flag to be routed to RTC_ALARM output + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR OSEL LL_RTC_SetAlarmOutEvent + * @param RTCx RTC Instance + * @param AlarmOutput This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @arg @ref LL_RTC_ALARMOUT_ALMB + * @arg @ref LL_RTC_ALARMOUT_WAKEUP + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutEvent(RTC_TypeDef *RTCx, uint32_t AlarmOutput) +{ + MODIFY_REG(RTCx->CR, RTC_CR_OSEL, AlarmOutput); +} + +/** + * @brief Get the flag to be routed to RTC_ALARM output + * @rmtoll CR OSEL LL_RTC_GetAlarmOutEvent + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARMOUT_DISABLE + * @arg @ref LL_RTC_ALARMOUT_ALMA + * @arg @ref LL_RTC_ALARMOUT_ALMB + * @arg @ref LL_RTC_ALARMOUT_WAKEUP + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutEvent(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_OSEL)); +} + +/** + * @brief Set RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @note Used only when RTC_ALARM is mapped on PC13 + * @rmtoll OR ALARMOUTTYPE LL_RTC_SetAlarmOutputType + * @param RTCx RTC Instance + * @param Output This parameter can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAlarmOutputType(RTC_TypeDef *RTCx, uint32_t Output) +{ + MODIFY_REG(RTCx->OR, RTC_OR_ALARMOUTTYPE, Output); +} + +/** + * @brief Get RTC_ALARM output type (ALARM in push-pull or open-drain output) + * @note used only when RTC_ALARM is mapped on PC13 + * @rmtoll OR ALARMOUTTYPE LL_RTC_GetAlarmOutputType + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_OPENDRAIN + * @arg @ref LL_RTC_ALARM_OUTPUTTYPE_PUSHPULL + */ +__STATIC_INLINE uint32_t LL_RTC_GetAlarmOutputType(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->OR, RTC_OR_ALARMOUTTYPE)); +} + +/** + * @brief Enable initialization mode + * @note Initialization mode is used to program time and date register (RTC_TR and RTC_DR) + * and prescaler register (RTC_PRER). + * Counters are stopped and start counting from the new value when INIT is reset. + * @rmtoll ISR INIT LL_RTC_EnableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableInitMode(RTC_TypeDef *RTCx) +{ + /* Set the Initialization mode */ + WRITE_REG(RTCx->ISR, RTC_INIT_MASK); +} + +/** + * @brief Disable initialization mode (Free running mode) + * @rmtoll ISR INIT LL_RTC_DisableInitMode + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableInitMode(RTC_TypeDef *RTCx) +{ + /* Exit Initialization mode */ + WRITE_REG(RTCx->ISR, (uint32_t)~RTC_ISR_INIT); +} + +/** + * @brief Set Output polarity (pin is low when ALRAF/ALRBF/WUTF is asserted) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR POL LL_RTC_SetOutputPolarity + * @param RTCx RTC Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetOutputPolarity(RTC_TypeDef *RTCx, uint32_t Polarity) +{ + MODIFY_REG(RTCx->CR, RTC_CR_POL, Polarity); +} + +/** + * @brief Get Output polarity + * @rmtoll CR POL LL_RTC_GetOutputPolarity + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_HIGH + * @arg @ref LL_RTC_OUTPUTPOLARITY_PIN_LOW + */ +__STATIC_INLINE uint32_t LL_RTC_GetOutputPolarity(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_POL)); +} + +/** + * @brief Enable Bypass the shadow registers + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR BYPSHAD LL_RTC_EnableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableShadowRegBypass(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Disable Bypass the shadow registers + * @rmtoll CR BYPSHAD LL_RTC_DisableShadowRegBypass + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableShadowRegBypass(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BYPSHAD); +} + +/** + * @brief Check if Shadow registers bypass is enabled or not. + * @rmtoll CR BYPSHAD LL_RTC_IsShadowRegBypassEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsShadowRegBypassEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_BYPSHAD) == (RTC_CR_BYPSHAD)) ? 1UL : 0UL); +} + +/** + * @brief Set Asynchronous prescaler factor + * @rmtoll PRER PREDIV_A LL_RTC_SetAsynchPrescaler + * @param RTCx RTC Instance + * @param AsynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7F + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetAsynchPrescaler(RTC_TypeDef *RTCx, uint32_t AsynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_A, AsynchPrescaler << RTC_PRER_PREDIV_A_Pos); +} + +/** + * @brief Set Synchronous prescaler factor + * @rmtoll PRER PREDIV_S LL_RTC_SetSynchPrescaler + * @param RTCx RTC Instance + * @param SynchPrescaler Value between Min_Data = 0 and Max_Data = 0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_SetSynchPrescaler(RTC_TypeDef *RTCx, uint32_t SynchPrescaler) +{ + MODIFY_REG(RTCx->PRER, RTC_PRER_PREDIV_S, SynchPrescaler); +} + +/** + * @brief Get Asynchronous prescaler factor + * @rmtoll PRER PREDIV_A LL_RTC_GetAsynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7F + */ +__STATIC_INLINE uint32_t LL_RTC_GetAsynchPrescaler(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_A) >> RTC_PRER_PREDIV_A_Pos); +} + +/** + * @brief Get Synchronous prescaler factor + * @rmtoll PRER PREDIV_S LL_RTC_GetSynchPrescaler + * @param RTCx RTC Instance + * @retval Value between Min_Data = 0 and Max_Data = 0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_GetSynchPrescaler(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->PRER, RTC_PRER_PREDIV_S)); +} + +/** + * @brief Enable the write protection for RTC registers. + * @rmtoll WPR KEY LL_RTC_EnableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_DISABLE); +} + +/** + * @brief Disable the write protection for RTC registers. + * @rmtoll WPR KEY LL_RTC_DisableWriteProtection + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableWriteProtection(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_1); + WRITE_REG(RTCx->WPR, RTC_WRITE_PROTECTION_ENABLE_2); +} + +/** + * @brief Enable RTC_OUT remap + * @rmtoll OR OUT_RMP LL_RTC_EnableOutRemap + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableOutRemap(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->OR, RTC_OR_OUT_RMP); +} + +/** + * @brief Disable RTC_OUT remap + * @rmtoll OR OUT_RMP LL_RTC_DisableOutRemap + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableOutRemap(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->OR, RTC_OR_OUT_RMP); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Time Time + * @{ + */ + +/** + * @brief Set time format (AM/24-hour or PM notation) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @rmtoll TR PM LL_RTC_TIME_SetFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->TR, RTC_TR_PM, TimeFormat); +} + +/** + * @brief Get time format (AM or PM notation) + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @rmtoll TR PM LL_RTC_TIME_GetFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, RTC_TR_PM)); +} + +/** + * @brief Set Hours in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert hour from binary to BCD format + * @rmtoll TR HT LL_RTC_TIME_SetHour\n + * TR HU LL_RTC_TIME_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_HT | RTC_TR_HU), + (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos))); +} + +/** + * @brief Get Hours in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert hour from BCD to + * Binary format + * @rmtoll TR HT LL_RTC_TIME_GetHour\n + * TR HU LL_RTC_TIME_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetHour(RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU))) >> RTC_TR_HU_Pos); +} + +/** + * @brief Set Minutes in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll TR MNT LL_RTC_TIME_SetMinute\n + * TR MNU LL_RTC_TIME_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU), + (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos))); +} + +/** + * @brief Get Minutes in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert minute from BCD + * to Binary format + * @rmtoll TR MNT LL_RTC_TIME_GetMinute\n + * TR MNU LL_RTC_TIME_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetMinute(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos); +} + +/** + * @brief Set Seconds in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll TR ST LL_RTC_TIME_SetSecond\n + * TR SU LL_RTC_TIME_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->TR, (RTC_TR_ST | RTC_TR_SU), + (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos))); +} + +/** + * @brief Get Seconds in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD + * to Binary format + * @rmtoll TR ST LL_RTC_TIME_GetSecond\n + * TR SU LL_RTC_TIME_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, (RTC_TR_ST | RTC_TR_SU)) >> RTC_TR_SU_Pos); +} + +/** + * @brief Set time (hour, minute and second) in BCD format + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note It can be written in initialization mode only (@ref LL_RTC_EnableInitMode function) + * @note TimeFormat and Hours should follow the same format + * @rmtoll TR PM LL_RTC_TIME_Config\n + * TR HT LL_RTC_TIME_Config\n + * TR HU LL_RTC_TIME_Config\n + * TR MNT LL_RTC_TIME_Config\n + * TR MNU LL_RTC_TIME_Config\n + * TR ST LL_RTC_TIME_Config\n + * TR SU LL_RTC_TIME_Config + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_TIME_FORMAT_AM_OR_24 + * @arg @ref LL_RTC_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Config(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | \ + (((Hours & 0xF0U) << (RTC_TR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_TR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_TR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_TR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_TR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_TR_SU_Pos)); + MODIFY_REG(RTCx->TR, (RTC_TR_PM | RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU), temp); +} + +/** + * @brief Get time (hour, minute and second) in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar + * shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)). + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll TR HT LL_RTC_TIME_Get\n + * TR HU LL_RTC_TIME_Get\n + * TR MNT LL_RTC_TIME_Get\n + * TR MNU LL_RTC_TIME_Get\n + * TR ST LL_RTC_TIME_Get\n + * TR SU LL_RTC_TIME_Get + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds (Format: 0x00HHMMSS). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_Get(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TR, (RTC_TR_HT | RTC_TR_HU | RTC_TR_MNT | RTC_TR_MNU | RTC_TR_ST | RTC_TR_SU))); +} + +/** + * @brief Memorize whether the daylight saving time change has been performed + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR BKP LL_RTC_TIME_EnableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_EnableDayLightStore(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_BKP); +} + +/** + * @brief Disable memorization whether the daylight saving time change has been performed. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR BKP LL_RTC_TIME_DisableDayLightStore + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DisableDayLightStore(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_BKP); +} + +/** + * @brief Check if RTC Day Light Saving stored operation has been enabled or not + * @rmtoll CR BKP LL_RTC_TIME_IsDayLightStoreEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_IsDayLightStoreEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_BKP) == (RTC_CR_BKP)) ? 1UL : 0UL); +} + +/** + * @brief Subtract 1 hour (winter time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR SUB1H LL_RTC_TIME_DecHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_DecHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_SUB1H); +} + +/** + * @brief Add 1 hour (summer time change) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ADD1H LL_RTC_TIME_IncHour + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_IncHour(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ADD1H); +} + +/** + * @brief Get subseconds value in the synchronous prescaler counter. + * @note You can use both SubSeconds value and SecondFraction (PREDIV_S through + * LL_RTC_GetSynchPrescaler function) terms returned to convert Calendar + * SubSeconds value in second fraction ratio with time unit following + * generic formula: + * ==> Seconds fraction ratio * time_unit = + * [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit + * This conversion can be performed only if no shift operation is pending + * (ie. SHFP=0) when PREDIV_S >= SS. + * @rmtoll SSR SS LL_RTC_TIME_GetSubSecond + * @param RTCx RTC Instance + * @retval Subseconds value (number between 0 and 65535) + */ +__STATIC_INLINE uint32_t LL_RTC_TIME_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->SSR, RTC_SSR_SS)); +} + +/** + * @brief Synchronize to a remote clock with a high degree of precision. + * @note This operation effectively subtracts from (delays) or advance the clock of a fraction of a second. + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note When REFCKON is set, firmware must not write to Shift control register. + * @rmtoll SHIFTR ADD1S LL_RTC_TIME_Synchronize\n + * SHIFTR SUBFS LL_RTC_TIME_Synchronize + * @param RTCx RTC Instance + * @param ShiftSecond This parameter can be one of the following values: + * @arg @ref LL_RTC_SHIFT_SECOND_DELAY + * @arg @ref LL_RTC_SHIFT_SECOND_ADVANCE + * @param Fraction Number of Seconds Fractions (any value from 0 to 0x7FFF) + * @retval None + */ +__STATIC_INLINE void LL_RTC_TIME_Synchronize(RTC_TypeDef *RTCx, uint32_t ShiftSecond, uint32_t Fraction) +{ + WRITE_REG(RTCx->SHIFTR, ShiftSecond | Fraction); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Date Date + * @{ + */ + +/** + * @brief Set Year in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Year from binary to BCD format + * @rmtoll DR YT LL_RTC_DATE_SetYear\n + * DR YU LL_RTC_DATE_SetYear + * @param RTCx RTC Instance + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetYear(RTC_TypeDef *RTCx, uint32_t Year) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_YT | RTC_DR_YU), + (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos))); +} + +/** + * @brief Get Year in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format + * @rmtoll DR YT LL_RTC_DATE_GetYear\n + * DR YU LL_RTC_DATE_GetYear + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x99 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetYear(RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_YT | RTC_DR_YU))) >> RTC_DR_YU_Pos); +} + +/** + * @brief Set Week day + * @rmtoll DR WDU LL_RTC_DATE_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->DR, RTC_DR_WDU, WeekDay << RTC_DR_WDU_Pos); +} + +/** + * @brief Get Week day + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @rmtoll DR WDU LL_RTC_DATE_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->DR, RTC_DR_WDU) >> RTC_DR_WDU_Pos); +} + +/** + * @brief Set Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Month from binary to BCD format + * @rmtoll DR MT LL_RTC_DATE_SetMonth\n + * DR MU LL_RTC_DATE_SetMonth + * @param RTCx RTC Instance + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetMonth(RTC_TypeDef *RTCx, uint32_t Month) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_MT | RTC_DR_MU), + (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos))); +} + +/** + * @brief Get Month in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll DR MT LL_RTC_DATE_GetMonth\n + * DR MU LL_RTC_DATE_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetMonth(RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_MT | RTC_DR_MU))) >> RTC_DR_MU_Pos); +} + +/** + * @brief Set Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll DR DT LL_RTC_DATE_SetDay\n + * DR DU LL_RTC_DATE_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->DR, (RTC_DR_DT | RTC_DR_DU), + (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos))); +} + +/** + * @brief Get Day in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll DR DT LL_RTC_DATE_GetDay\n + * DR DU LL_RTC_DATE_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_GetDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->DR, (RTC_DR_DT | RTC_DR_DU))) >> RTC_DR_DU_Pos); +} + +/** + * @brief Set date (WeekDay, Day, Month and Year) in BCD format + * @rmtoll DR WDU LL_RTC_DATE_Config\n + * DR MT LL_RTC_DATE_Config\n + * DR MU LL_RTC_DATE_Config\n + * DR DT LL_RTC_DATE_Config\n + * DR DU LL_RTC_DATE_Config\n + * DR YT LL_RTC_DATE_Config\n + * DR YU LL_RTC_DATE_Config + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @param Month This parameter can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + * @param Year Value between Min_Data=0x00 and Max_Data=0x99 + * @retval None + */ +__STATIC_INLINE void LL_RTC_DATE_Config(RTC_TypeDef *RTCx, uint32_t WeekDay, uint32_t Day, uint32_t Month, uint32_t Year) +{ + uint32_t temp; + + temp = ( WeekDay << RTC_DR_WDU_Pos) | \ + (((Year & 0xF0U) << (RTC_DR_YT_Pos - 4U)) | ((Year & 0x0FU) << RTC_DR_YU_Pos)) | \ + (((Month & 0xF0U) << (RTC_DR_MT_Pos - 4U)) | ((Month & 0x0FU) << RTC_DR_MU_Pos)) | \ + (((Day & 0xF0U) << (RTC_DR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_DR_DU_Pos)); + + MODIFY_REG(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU), temp); +} + +/** + * @brief Get date (WeekDay, Day, Month and Year) in BCD format + * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set + * before reading this bit + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll DR WDU LL_RTC_DATE_Get\n + * DR MT LL_RTC_DATE_Get\n + * DR MU LL_RTC_DATE_Get\n + * DR DT LL_RTC_DATE_Get\n + * DR DU LL_RTC_DATE_Get\n + * DR YT LL_RTC_DATE_Get\n + * DR YU LL_RTC_DATE_Get + * @param RTCx RTC Instance + * @retval Combination of WeekDay, Day, Month and Year (Format: 0xWWDDMMYY). + */ +__STATIC_INLINE uint32_t LL_RTC_DATE_Get(RTC_TypeDef *RTCx) +{ + uint32_t temp; + + temp = READ_BIT(RTCx->DR, (RTC_DR_WDU | RTC_DR_MT | RTC_DR_MU | RTC_DR_DT | RTC_DR_DU | RTC_DR_YT | RTC_DR_YU)); + + return (uint32_t)((((temp & RTC_DR_WDU) >> RTC_DR_WDU_Pos) << RTC_OFFSET_WEEKDAY) | \ + (((temp & (RTC_DR_DT | RTC_DR_DU)) >> RTC_DR_DU_Pos) << RTC_OFFSET_DAY) | \ + (((temp & (RTC_DR_MT | RTC_DR_MU)) >> RTC_DR_MU_Pos) << RTC_OFFSET_MONTH) | \ + ((temp & (RTC_DR_YT | RTC_DR_YU)) >> RTC_DR_YU_Pos)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_ALARMA ALARMA + * @{ + */ + +/** + * @brief Enable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRAE LL_RTC_ALMA_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Disable Alarm A + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRAE LL_RTC_ALMA_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAE); +} + +/** + * @brief Specify the Alarm A masks. + * @rmtoll ALRMAR MSK4 LL_RTC_ALMA_SetMask\n + * ALRMAR MSK3 LL_RTC_ALMA_SetMask\n + * ALRMAR MSK2 LL_RTC_ALMA_SetMask\n + * ALRMAR MSK1 LL_RTC_ALMA_SetMask + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1, Mask); +} + +/** + * @brief Get the Alarm A masks. + * @rmtoll ALRMAR MSK4 LL_RTC_ALMA_GetMask\n + * ALRMAR MSK3 LL_RTC_ALMA_GetMask\n + * ALRMAR MSK2 LL_RTC_ALMA_GetMask\n + * ALRMAR MSK1 LL_RTC_ALMA_GetMask + * @param RTCx RTC Instance + * @retval Returned value can be can be a combination of the following values: + * @arg @ref LL_RTC_ALMA_MASK_NONE + * @arg @ref LL_RTC_ALMA_MASK_DATEWEEKDAY + * @arg @ref LL_RTC_ALMA_MASK_HOURS + * @arg @ref LL_RTC_ALMA_MASK_MINUTES + * @arg @ref LL_RTC_ALMA_MASK_SECONDS + * @arg @ref LL_RTC_ALMA_MASK_ALL + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_MSK4 | RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2 | RTC_ALRMAR_MSK1)); +} + +/** + * @brief Enable AlarmA Week day selection (DU[3:0] represents the week day. DT[1:0] is do not care) + * @rmtoll ALRMAR WDSEL LL_RTC_ALMA_EnableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_EnableWeekday(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Disable AlarmA Week day selection (DU[3:0] represents the date ) + * @rmtoll ALRMAR WDSEL LL_RTC_ALMA_DisableWeekday + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_DisableWeekday(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->ALRMAR, RTC_ALRMAR_WDSEL); +} + +/** + * @brief Set ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Day from binary to BCD format + * @rmtoll ALRMAR DT LL_RTC_ALMA_SetDay\n + * ALRMAR DU LL_RTC_ALMA_SetDay + * @param RTCx RTC Instance + * @param Day Value between Min_Data=0x01 and Max_Data=0x31 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetDay(RTC_TypeDef *RTCx, uint32_t Day) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU), + (((Day & 0xF0U) << (RTC_ALRMAR_DT_Pos - 4U)) | ((Day & 0x0FU) << RTC_ALRMAR_DU_Pos))); +} + +/** + * @brief Get ALARM A Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll ALRMAR DT LL_RTC_ALMA_GetDay\n + * ALRMAR DU LL_RTC_ALMA_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_DT | RTC_ALRMAR_DU))) >> RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Set ALARM A Weekday + * @rmtoll ALRMAR DU LL_RTC_ALMA_SetWeekDay + * @param RTCx RTC Instance + * @param WeekDay This parameter can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetWeekDay(RTC_TypeDef *RTCx, uint32_t WeekDay) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_DU, WeekDay << RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Get ALARM A Weekday + * @rmtoll ALRMAR DU LL_RTC_ALMA_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_DU) >> RTC_ALRMAR_DU_Pos); +} + +/** + * @brief Set Alarm A time format (AM/24-hour or PM notation) + * @rmtoll ALRMAR PM LL_RTC_ALMA_SetTimeFormat + * @param RTCx RTC Instance + * @param TimeFormat This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetTimeFormat(RTC_TypeDef *RTCx, uint32_t TimeFormat) +{ + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM, TimeFormat); +} + +/** + * @brief Get Alarm A time format (AM or PM notation) + * @rmtoll ALRMAR PM LL_RTC_ALMA_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMAR, RTC_ALRMAR_PM)); +} + +/** + * @brief Set ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Hours from binary to BCD format + * @rmtoll ALRMAR HT LL_RTC_ALMA_SetHour\n + * ALRMAR HU LL_RTC_ALMA_SetHour + * @param RTCx RTC Instance + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetHour(RTC_TypeDef *RTCx, uint32_t Hours) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU), + (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos))); +} + +/** + * @brief Get ALARM A Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll ALRMAR HT LL_RTC_ALMA_GetHour\n + * ALRMAR HU LL_RTC_ALMA_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetHour(RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_HT | RTC_ALRMAR_HU))) >> RTC_ALRMAR_HU_Pos); +} + +/** + * @brief Set ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Minutes from binary to BCD format + * @rmtoll ALRMAR MNT LL_RTC_ALMA_SetMinute\n + * ALRMAR MNU LL_RTC_ALMA_SetMinute + * @param RTCx RTC Instance + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetMinute(RTC_TypeDef *RTCx, uint32_t Minutes) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU), + (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos))); +} + +/** + * @brief Get ALARM A Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll ALRMAR MNT LL_RTC_ALMA_GetMinute\n + * ALRMAR MNU LL_RTC_ALMA_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetMinute(RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU))) >> RTC_ALRMAR_MNU_Pos); +} + +/** + * @brief Set ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BIN2BCD is available to convert Seconds from binary to BCD format + * @rmtoll ALRMAR ST LL_RTC_ALMA_SetSecond\n + * ALRMAR SU LL_RTC_ALMA_SetSecond + * @param RTCx RTC Instance + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSecond(RTC_TypeDef *RTCx, uint32_t Seconds) +{ + MODIFY_REG(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU), + (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos))); +} + +/** + * @brief Get ALARM A Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll ALRMAR ST LL_RTC_ALMA_GetSecond\n + * ALRMAR SU LL_RTC_ALMA_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)((READ_BIT(RTCx->ALRMAR, (RTC_ALRMAR_ST | RTC_ALRMAR_SU))) >> RTC_ALRMAR_SU_Pos); +} + +/** + * @brief Set Alarm A Time (hour, minute and second) in BCD format + * @rmtoll ALRMAR PM LL_RTC_ALMA_ConfigTime\n + * ALRMAR HT LL_RTC_ALMA_ConfigTime\n + * ALRMAR HU LL_RTC_ALMA_ConfigTime\n + * ALRMAR MNT LL_RTC_ALMA_ConfigTime\n + * ALRMAR MNU LL_RTC_ALMA_ConfigTime\n + * ALRMAR ST LL_RTC_ALMA_ConfigTime\n + * ALRMAR SU LL_RTC_ALMA_ConfigTime + * @param RTCx RTC Instance + * @param Format12_24 This parameter can be one of the following values: + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_AM + * @arg @ref LL_RTC_ALMA_TIME_FORMAT_PM + * @param Hours Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + * @param Minutes Value between Min_Data=0x00 and Max_Data=0x59 + * @param Seconds Value between Min_Data=0x00 and Max_Data=0x59 + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_ConfigTime(RTC_TypeDef *RTCx, uint32_t Format12_24, uint32_t Hours, uint32_t Minutes, uint32_t Seconds) +{ + uint32_t temp; + + temp = Format12_24 | \ + (((Hours & 0xF0U) << (RTC_ALRMAR_HT_Pos - 4U)) | ((Hours & 0x0FU) << RTC_ALRMAR_HU_Pos)) | \ + (((Minutes & 0xF0U) << (RTC_ALRMAR_MNT_Pos - 4U)) | ((Minutes & 0x0FU) << RTC_ALRMAR_MNU_Pos)) | \ + (((Seconds & 0xF0U) << (RTC_ALRMAR_ST_Pos - 4U)) | ((Seconds & 0x0FU) << RTC_ALRMAR_SU_Pos)); + + MODIFY_REG(RTCx->ALRMAR, RTC_ALRMAR_PM | RTC_ALRMAR_HT | RTC_ALRMAR_HU | RTC_ALRMAR_MNT | RTC_ALRMAR_MNU | RTC_ALRMAR_ST | RTC_ALRMAR_SU, temp); +} + +/** + * @brief Get Alarm B Time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll ALRMAR HT LL_RTC_ALMA_GetTime\n + * ALRMAR HU LL_RTC_ALMA_GetTime\n + * ALRMAR MNT LL_RTC_ALMA_GetTime\n + * ALRMAR MNU LL_RTC_ALMA_GetTime\n + * ALRMAR ST LL_RTC_ALMA_GetTime\n + * ALRMAR SU LL_RTC_ALMA_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)((LL_RTC_ALMA_GetHour(RTCx) << RTC_OFFSET_HOUR) | (LL_RTC_ALMA_GetMinute(RTCx) << RTC_OFFSET_MINUTE) | LL_RTC_ALMA_GetSecond(RTCx)); +} + +/** + * @brief Mask the most-significant bits of the subseconds field starting from + * the bit specified in parameter Mask + * @note This register can be written only when ALRAE is reset in RTC_CR register, + * or in initialization mode. + * @rmtoll ALRMASSR MASKSS LL_RTC_ALMA_SetSubSecondMask + * @param RTCx RTC Instance + * @param Mask Value between Min_Data=0x00 and Max_Data=0xF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecondMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS, Mask << RTC_ALRMASSR_MASKSS_Pos); +} + +/** + * @brief Get Alarm A subseconds mask + * @rmtoll ALRMASSR MASKSS LL_RTC_ALMA_GetSubSecondMask + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecondMask(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_MASKSS) >> RTC_ALRMASSR_MASKSS_Pos); +} + +/** + * @brief Set Alarm A subseconds value + * @rmtoll ALRMASSR SS LL_RTC_ALMA_SetSubSecond + * @param RTCx RTC Instance + * @param Subsecond Value between Min_Data=0x00 and Max_Data=0x7FFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_ALMA_SetSubSecond(RTC_TypeDef *RTCx, uint32_t Subsecond) +{ + MODIFY_REG(RTCx->ALRMASSR, RTC_ALRMASSR_SS, Subsecond); +} + +/** + * @brief Get Alarm A subseconds value + * @rmtoll ALRMASSR SS LL_RTC_ALMA_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x7FFF + */ +__STATIC_INLINE uint32_t LL_RTC_ALMA_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->ALRMASSR, RTC_ALRMASSR_SS)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Timestamp Timestamp + * @{ + */ + +/** + * @brief Enable internal event timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ITSE LL_RTC_TS_EnableInternalEvent + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_EnableInternalEvent(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ITSE); +} + +/** + * @brief Disable internal event timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ITSE LL_RTC_TS_DisableInternalEvent + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_DisableInternalEvent(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ITSE); +} + +/** + * @brief Enable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR TSE LL_RTC_TS_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Disable Timestamp + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR TSE LL_RTC_TS_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSE); +} + +/** + * @brief Set Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note TSE must be reset when TSEDGE is changed to avoid unwanted TSF setting + * @rmtoll CR TSEDGE LL_RTC_TS_SetActiveEdge + * @param RTCx RTC Instance + * @param Edge This parameter can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_SetActiveEdge(RTC_TypeDef *RTCx, uint32_t Edge) +{ + MODIFY_REG(RTCx->CR, RTC_CR_TSEDGE, Edge); +} + +/** + * @brief Get Time-stamp event active edge + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR TSEDGE LL_RTC_TS_GetActiveEdge + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TIMESTAMP_EDGE_RISING + * @arg @ref LL_RTC_TIMESTAMP_EDGE_FALLING + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetActiveEdge(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_TSEDGE)); +} + +/** + * @brief Get Timestamp AM/PM notation (AM or 24-hour format) + * @rmtoll TSTR PM LL_RTC_TS_GetTimeFormat + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TS_TIME_FORMAT_AM + * @arg @ref LL_RTC_TS_TIME_FORMAT_PM + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTimeFormat(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_PM)); +} + +/** + * @brief Get Timestamp Hours in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Hours from BCD to Binary format + * @rmtoll TSTR HT LL_RTC_TS_GetHour\n + * TSTR HU LL_RTC_TS_GetHour + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x12 or between Min_Data=0x00 and Max_Data=0x23 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetHour(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_HT | RTC_TSTR_HU) >> RTC_TSTR_HU_Pos); +} + +/** + * @brief Get Timestamp Minutes in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Minutes from BCD to Binary format + * @rmtoll TSTR MNT LL_RTC_TS_GetMinute\n + * TSTR MNU LL_RTC_TS_GetMinute + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMinute(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_MNT | RTC_TSTR_MNU) >> RTC_TSTR_MNU_Pos); +} + +/** + * @brief Get Timestamp Seconds in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Seconds from BCD to Binary format + * @rmtoll TSTR ST LL_RTC_TS_GetSecond\n + * TSTR SU LL_RTC_TS_GetSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x59 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp time (hour, minute and second) in BCD format + * @note helper macros __LL_RTC_GET_HOUR, __LL_RTC_GET_MINUTE and __LL_RTC_GET_SECOND + * are available to get independently each parameter. + * @rmtoll TSTR HT LL_RTC_TS_GetTime\n + * TSTR HU LL_RTC_TS_GetTime\n + * TSTR MNT LL_RTC_TS_GetTime\n + * TSTR MNU LL_RTC_TS_GetTime\n + * TSTR ST LL_RTC_TS_GetTime\n + * TSTR SU LL_RTC_TS_GetTime + * @param RTCx RTC Instance + * @retval Combination of hours, minutes and seconds. + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetTime(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSTR, + RTC_TSTR_HT | RTC_TSTR_HU | RTC_TSTR_MNT | RTC_TSTR_MNU | RTC_TSTR_ST | RTC_TSTR_SU)); +} + +/** + * @brief Get Timestamp Week day + * @rmtoll TSDR WDU LL_RTC_TS_GetWeekDay + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WEEKDAY_MONDAY + * @arg @ref LL_RTC_WEEKDAY_TUESDAY + * @arg @ref LL_RTC_WEEKDAY_WEDNESDAY + * @arg @ref LL_RTC_WEEKDAY_THURSDAY + * @arg @ref LL_RTC_WEEKDAY_FRIDAY + * @arg @ref LL_RTC_WEEKDAY_SATURDAY + * @arg @ref LL_RTC_WEEKDAY_SUNDAY + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetWeekDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU) >> RTC_TSDR_WDU_Pos); +} + +/** + * @brief Get Timestamp Month in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format + * @rmtoll TSDR MT LL_RTC_TS_GetMonth\n + * TSDR MU LL_RTC_TS_GetMonth + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_MONTH_JANUARY + * @arg @ref LL_RTC_MONTH_FEBRUARY + * @arg @ref LL_RTC_MONTH_MARCH + * @arg @ref LL_RTC_MONTH_APRIL + * @arg @ref LL_RTC_MONTH_MAY + * @arg @ref LL_RTC_MONTH_JUNE + * @arg @ref LL_RTC_MONTH_JULY + * @arg @ref LL_RTC_MONTH_AUGUST + * @arg @ref LL_RTC_MONTH_SEPTEMBER + * @arg @ref LL_RTC_MONTH_OCTOBER + * @arg @ref LL_RTC_MONTH_NOVEMBER + * @arg @ref LL_RTC_MONTH_DECEMBER + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetMonth(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_MT | RTC_TSDR_MU) >> RTC_TSDR_MU_Pos); +} + +/** + * @brief Get Timestamp Day in BCD format + * @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format + * @rmtoll TSDR DT LL_RTC_TS_GetDay\n + * TSDR DU LL_RTC_TS_GetDay + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x01 and Max_Data=0x31 + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDay(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get Timestamp date (WeekDay, Day and Month) in BCD format + * @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_MONTH, + * and __LL_RTC_GET_DAY are available to get independently each parameter. + * @rmtoll TSDR WDU LL_RTC_TS_GetDate\n + * TSDR MT LL_RTC_TS_GetDate\n + * TSDR MU LL_RTC_TS_GetDate\n + * TSDR DT LL_RTC_TS_GetDate\n + * TSDR DU LL_RTC_TS_GetDate + * @param RTCx RTC Instance + * @retval Combination of Weekday, Day and Month + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetDate(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSDR, RTC_TSDR_WDU | RTC_TSDR_MT | RTC_TSDR_MU | RTC_TSDR_DT | RTC_TSDR_DU)); +} + +/** + * @brief Get time-stamp subseconds value + * @rmtoll TSSSR SS LL_RTC_TS_GetSubSecond + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_TS_GetSubSecond(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TSSSR, RTC_TSSSR_SS)); +} + +#if defined(RTC_TAMPCR_TAMPTS) +/** + * @brief Activate timestamp on tamper detection event + * @rmtoll TAMPCR TAMPTS LL_RTC_TS_EnableOnTamper + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_EnableOnTamper(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMPTS); +} + +/** + * @brief Disable timestamp on tamper detection event + * @rmtoll TAMPCR TAMPTS LL_RTC_TS_DisableOnTamper + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TS_DisableOnTamper(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMPTS); +} +#endif /* RTC_TAMPCR_TAMPTS */ + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Tamper Tamper + * @{ + */ + +/** + * @brief Enable RTC_TAMPx input detection + * @rmtoll TAMPCR TAMP1E LL_RTC_TAMPER_Enable\n + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_1 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Enable(RTC_TypeDef *RTCx, uint32_t Tamper) +{ + SET_BIT(RTCx->TAMPCR, Tamper); +} + +/** + * @brief Clear RTC_TAMPx input detection + * @rmtoll TAMPCR TAMP1E LL_RTC_TAMPER_Disable\n + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_1 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_Disable(RTC_TypeDef *RTCx, uint32_t Tamper) +{ + CLEAR_BIT(RTCx->TAMPCR, Tamper); +} + +/** + * @brief Enable Tamper mask flag + * @note Associated Tamper IT must not enabled when tamper mask is set. + * @rmtoll TAMPCR TAMP1MF LL_RTC_TAMPER_EnableMask\n + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER1 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + SET_BIT(RTCx->TAMPCR, Mask); +} + +/** + * @brief Disable Tamper mask flag + * @rmtoll TAMPCR TAMP1MF LL_RTC_TAMPER_DisableMask\n + * @param RTCx RTC Instance + * @param Mask This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_MASK_TAMPER1 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableMask(RTC_TypeDef *RTCx, uint32_t Mask) +{ + CLEAR_BIT(RTCx->TAMPCR, Mask); +} + +/** + * @brief Enable backup register erase after Tamper event detection + * @rmtoll TAMPCR TAMP1NOERASE LL_RTC_TAMPER_EnableEraseBKP\n + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER1 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableEraseBKP(RTC_TypeDef *RTCx, uint32_t Tamper) +{ + CLEAR_BIT(RTCx->TAMPCR, Tamper); +} + +/** + * @brief Disable backup register erase after Tamper event detection + * @rmtoll TAMPCR TAMP1NOERASE LL_RTC_TAMPER_DisableEraseBKP\n + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_NOERASE_TAMPER1 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableEraseBKP(RTC_TypeDef *RTCx, uint32_t Tamper) +{ + SET_BIT(RTCx->TAMPCR, Tamper); +} + +/** + * @brief Disable RTC_TAMPx pull-up disable (Disable precharge of RTC_TAMPx pins) + * @rmtoll TAMPCR TAMPPUDIS LL_RTC_TAMPER_DisablePullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisablePullUp(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMPPUDIS); +} + +/** + * @brief Enable RTC_TAMPx pull-up disable ( Precharge RTC_TAMPx pins before sampling) + * @rmtoll TAMPCR TAMPPUDIS LL_RTC_TAMPER_EnablePullUp + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnablePullUp(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMPPUDIS); +} + +/** + * @brief Set RTC_TAMPx precharge duration + * @rmtoll TAMPCR TAMPPRCH LL_RTC_TAMPER_SetPrecharge + * @param RTCx RTC Instance + * @param Duration This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetPrecharge(RTC_TypeDef *RTCx, uint32_t Duration) +{ + MODIFY_REG(RTCx->TAMPCR, RTC_TAMPCR_TAMPPRCH, Duration); +} + +/** + * @brief Get RTC_TAMPx precharge duration + * @rmtoll TAMPCR TAMPPRCH LL_RTC_TAMPER_GetPrecharge + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_DURATION_1RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_2RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_4RTCCLK + * @arg @ref LL_RTC_TAMPER_DURATION_8RTCCLK + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetPrecharge(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMPPRCH)); +} + +/** + * @brief Set RTC_TAMPx filter count + * @rmtoll TAMPCR TAMPFLT LL_RTC_TAMPER_SetFilterCount + * @param RTCx RTC Instance + * @param FilterCount This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE + * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetFilterCount(RTC_TypeDef *RTCx, uint32_t FilterCount) +{ + MODIFY_REG(RTCx->TAMPCR, RTC_TAMPCR_TAMPFLT, FilterCount); +} + +/** + * @brief Get RTC_TAMPx filter count + * @rmtoll TAMPCR TAMPFLT LL_RTC_TAMPER_GetFilterCount + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_FILTER_DISABLE + * @arg @ref LL_RTC_TAMPER_FILTER_2SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_4SAMPLE + * @arg @ref LL_RTC_TAMPER_FILTER_8SAMPLE + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetFilterCount(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMPFLT)); +} + +/** + * @brief Set Tamper sampling frequency + * @rmtoll TAMPCR TAMPFREQ LL_RTC_TAMPER_SetSamplingFreq + * @param RTCx RTC Instance + * @param SamplingFreq This parameter can be one of the following values: + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_SetSamplingFreq(RTC_TypeDef *RTCx, uint32_t SamplingFreq) +{ + MODIFY_REG(RTCx->TAMPCR, RTC_TAMPCR_TAMPFREQ, SamplingFreq); +} + +/** + * @brief Get Tamper sampling frequency + * @rmtoll TAMPCR TAMPFREQ LL_RTC_TAMPER_GetSamplingFreq + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_32768 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_16384 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_8192 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_4096 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_2048 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_1024 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_512 + * @arg @ref LL_RTC_TAMPER_SAMPLFREQDIV_256 + */ +__STATIC_INLINE uint32_t LL_RTC_TAMPER_GetSamplingFreq(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMPFREQ)); +} + +/** + * @brief Enable Active level for Tamper input + * @rmtoll TAMPCR TAMP1TRG LL_RTC_TAMPER_EnableActiveLevel\n + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_EnableActiveLevel(RTC_TypeDef *RTCx, uint32_t Tamper) +{ + SET_BIT(RTCx->TAMPCR, Tamper); +} + +/** + * @brief Disable Active level for Tamper input + * @rmtoll TAMPCR TAMP1TRG LL_RTC_TAMPER_DisableActiveLevel\n + * @param RTCx RTC Instance + * @param Tamper This parameter can be a combination of the following values: + * @arg @ref LL_RTC_TAMPER_ACTIVELEVEL_TAMP1 + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_TAMPER_DisableActiveLevel(RTC_TypeDef *RTCx, uint32_t Tamper) +{ + CLEAR_BIT(RTCx->TAMPCR, Tamper); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Wakeup Wakeup + * @{ + */ + +/** + * @brief Enable Wakeup timer + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR WUTE LL_RTC_WAKEUP_Enable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_Enable(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_WUTE); +} + +/** + * @brief Disable Wakeup timer + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR WUTE LL_RTC_WAKEUP_Disable + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_Disable(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_WUTE); +} + +/** + * @brief Check if Wakeup timer is enabled or not + * @rmtoll CR WUTE LL_RTC_WAKEUP_IsEnabled + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_IsEnabled(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_WUTE) == (RTC_CR_WUTE)) ? 1UL : 0UL); +} + +/** + * @brief Select Wakeup clock + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RTC_CR WUTE bit = 0 and RTC_ISR WUTWF bit = 1 + * @rmtoll CR WUCKSEL LL_RTC_WAKEUP_SetClock + * @param RTCx RTC Instance + * @param WakeupClock This parameter can be one of the following values: + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_SetClock(RTC_TypeDef *RTCx, uint32_t WakeupClock) +{ + MODIFY_REG(RTCx->CR, RTC_CR_WUCKSEL, WakeupClock); +} + +/** + * @brief Get Wakeup clock + * @rmtoll CR WUCKSEL LL_RTC_WAKEUP_GetClock + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_16 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_8 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_4 + * @arg @ref LL_RTC_WAKEUPCLOCK_DIV_2 + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE + * @arg @ref LL_RTC_WAKEUPCLOCK_CKSPRE_WUT + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetClock(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_WUCKSEL)); +} + +/** + * @brief Set Wakeup auto-reload value + * @note Bit can be written only when WUTWF is set to 1 in RTC_ISR + * @rmtoll WUTR WUT LL_RTC_WAKEUP_SetAutoReload + * @param RTCx RTC Instance + * @param Value Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_WAKEUP_SetAutoReload(RTC_TypeDef *RTCx, uint32_t Value) +{ + MODIFY_REG(RTCx->WUTR, RTC_WUTR_WUT, Value); +} + +/** + * @brief Get Wakeup auto-reload value + * @rmtoll WUTR WUT LL_RTC_WAKEUP_GetAutoReload + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_WAKEUP_GetAutoReload(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->WUTR, RTC_WUTR_WUT)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Backup_Registers Backup_Registers + * @{ + */ + +/** + * @brief Writes a data in a specified RTC Backup data register. + * @rmtoll BKPxR BKP LL_RTC_BAK_SetRegister + * @param RTCx RTC Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @param Data Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + * @retval None + */ +__STATIC_INLINE void LL_RTC_BAK_SetRegister(RTC_TypeDef *RTCx, uint32_t BackupRegister, uint32_t Data) +{ + uint32_t temp; + + temp = (uint32_t)(&(RTCx->BKP0R)); + temp += (BackupRegister * 4U); + + /* Write the specified register */ + *(__IO uint32_t *)temp = (uint32_t)Data; +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @rmtoll BKPxR BKP LL_RTC_BAK_GetRegister + * @param RTCx RTC Instance + * @param BackupRegister This parameter can be one of the following values: + * @arg @ref LL_RTC_BKP_DR0 + * @arg @ref LL_RTC_BKP_DR1 + * @arg @ref LL_RTC_BKP_DR2 + * @arg @ref LL_RTC_BKP_DR3 + * @arg @ref LL_RTC_BKP_DR4 + * @retval Value between Min_Data=0x00 and Max_Data=0xFFFFFFFF + */ +__STATIC_INLINE uint32_t LL_RTC_BAK_GetRegister(RTC_TypeDef *RTCx, uint32_t BackupRegister) +{ + uint32_t temp; + + temp = (uint32_t)(&(RTCx->BKP0R)); + temp += (BackupRegister * 4U); + + /* Read the specified register */ + return (*(__IO uint32_t *)temp); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_Calibration Calibration + * @{ + */ + +/** + * @brief Set Calibration output frequency (1 Hz or 512 Hz) + * @note Bits are write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR COE LL_RTC_CAL_SetOutputFreq\n + * CR COSEL LL_RTC_CAL_SetOutputFreq + * @param RTCx RTC Instance + * @param Frequency This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + * + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetOutputFreq(RTC_TypeDef *RTCx, uint32_t Frequency) +{ + MODIFY_REG(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL, Frequency); +} + +/** + * @brief Get Calibration output frequency (1 Hz or 512 Hz) + * @rmtoll CR COE LL_RTC_CAL_GetOutputFreq\n + * CR COSEL LL_RTC_CAL_GetOutputFreq + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_OUTPUT_NONE + * @arg @ref LL_RTC_CALIB_OUTPUT_1HZ + * @arg @ref LL_RTC_CALIB_OUTPUT_512HZ + * + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetOutputFreq(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CR, RTC_CR_COE | RTC_CR_COSEL)); +} + +/** + * @brief Insert or not One RTCCLK pulse every 2exp11 pulses (frequency increased by 488.5 ppm) + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR + * @rmtoll CALR CALP LL_RTC_CAL_SetPulse + * @param RTCx RTC Instance + * @param Pulse This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_INSERTPULSE_NONE + * @arg @ref LL_RTC_CALIB_INSERTPULSE_SET + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPulse(RTC_TypeDef *RTCx, uint32_t Pulse) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALP, Pulse); +} + +/** + * @brief Check if one RTCCLK has been inserted or not every 2exp11 pulses (frequency increased by 488.5 ppm) + * @rmtoll CALR CALP LL_RTC_CAL_IsPulseInserted + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_IsPulseInserted(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CALR, RTC_CALR_CALP) == (RTC_CALR_CALP)) ? 1UL : 0UL); +} + +/** + * @brief Set smooth calibration cycle period + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR + * @rmtoll CALR CALW8 LL_RTC_CAL_SetPeriod\n + * CALR CALW16 LL_RTC_CAL_SetPeriod + * @param RTCx RTC Instance + * @param Period This parameter can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetPeriod(RTC_TypeDef *RTCx, uint32_t Period) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16, Period); +} + +/** + * @brief Get smooth calibration cycle period + * @rmtoll CALR CALW8 LL_RTC_CAL_GetPeriod\n + * CALR CALW16 LL_RTC_CAL_GetPeriod + * @param RTCx RTC Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_RTC_CALIB_PERIOD_32SEC + * @arg @ref LL_RTC_CALIB_PERIOD_16SEC + * @arg @ref LL_RTC_CALIB_PERIOD_8SEC + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetPeriod(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALW8 | RTC_CALR_CALW16)); +} + +/** + * @brief Set smooth Calibration minus + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @note Bit can be written only when RECALPF is set to 0 in RTC_ISR + * @rmtoll CALR CALM LL_RTC_CAL_SetMinus + * @param RTCx RTC Instance + * @param CalibMinus Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_RTC_CAL_SetMinus(RTC_TypeDef *RTCx, uint32_t CalibMinus) +{ + MODIFY_REG(RTCx->CALR, RTC_CALR_CALM, CalibMinus); +} + +/** + * @brief Get smooth Calibration minus + * @rmtoll CALR CALM LL_RTC_CAL_GetMinus + * @param RTCx RTC Instance + * @retval Value between Min_Data=0x00 and Max_Data= 0x1FF + */ +__STATIC_INLINE uint32_t LL_RTC_CAL_GetMinus(RTC_TypeDef *RTCx) +{ + return (uint32_t)(READ_BIT(RTCx->CALR, RTC_CALR_CALM)); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Get Internal Time-stamp flag + * @rmtoll ISR ITSF LL_RTC_IsActiveFlag_ITS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ITS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_ITSF) == (RTC_ISR_ITSF)) ? 1UL : 0UL); +} + +/** + * @brief Get Recalibration pending Flag + * @rmtoll ISR RECALPF LL_RTC_IsActiveFlag_RECALP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RECALP(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_RECALPF) == (RTC_ISR_RECALPF)) ? 1UL : 0UL); +} + +/** + * @brief Get RTC_TAMP1 detection flag + * @rmtoll ISR TAMP1F LL_RTC_IsActiveFlag_TAMP1 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TAMP1(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_TAMP1F) == (RTC_ISR_TAMP1F)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp overflow flag + * @rmtoll ISR TSOVF LL_RTC_IsActiveFlag_TSOV + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TSOV(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_TSOVF) == (RTC_ISR_TSOVF)) ? 1UL : 0UL); +} + +/** + * @brief Get Time-stamp flag + * @rmtoll ISR TSF LL_RTC_IsActiveFlag_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_TS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_TSF) == (RTC_ISR_TSF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wakeup timer flag + * @rmtoll ISR WUTF LL_RTC_IsActiveFlag_WUT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUT(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_WUTF) == (RTC_ISR_WUTF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm A flag + * @rmtoll ISR ALRAF LL_RTC_IsActiveFlag_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRA(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_ALRAF) == (RTC_ISR_ALRAF)) ? 1UL : 0UL); +} + +/** + * @brief Clear Internal Time-stamp flag + * @rmtoll ISR ITSF LL_RTC_ClearFlag_ITS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ITS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_ITSF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Clear RTC_TAMP1 detection flag + * @rmtoll ISR TAMP1F LL_RTC_ClearFlag_TAMP1 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TAMP1(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_TAMP1F | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Clear Time-stamp overflow flag + * @rmtoll ISR TSOVF LL_RTC_ClearFlag_TSOV + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TSOV(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_TSOVF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Clear Time-stamp flag + * @rmtoll ISR TSF LL_RTC_ClearFlag_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_TS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_TSF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Clear Wakeup timer flag + * @rmtoll ISR WUTF LL_RTC_ClearFlag_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_WUT(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_WUTF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Clear Alarm A flag + * @rmtoll ISR ALRAF LL_RTC_ClearFlag_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_ALRA(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_ALRAF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Get Initialization flag + * @rmtoll ISR INITF LL_RTC_IsActiveFlag_INIT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INIT(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_INITF) == (RTC_ISR_INITF)) ? 1UL : 0UL); +} + +/** + * @brief Get Registers synchronization flag + * @rmtoll ISR RSF LL_RTC_IsActiveFlag_RS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_RS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_RSF) == (RTC_ISR_RSF)) ? 1UL : 0UL); +} + +/** + * @brief Clear Registers synchronization flag + * @rmtoll ISR RSF LL_RTC_ClearFlag_RS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_ClearFlag_RS(RTC_TypeDef *RTCx) +{ + WRITE_REG(RTCx->ISR, (~((RTC_ISR_RSF | RTC_ISR_INIT) & 0x0000FFFFU) | (RTCx->ISR & RTC_ISR_INIT))); +} + +/** + * @brief Get Initialization status flag + * @rmtoll ISR INITS LL_RTC_IsActiveFlag_INITS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_INITS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_INITS) == (RTC_ISR_INITS)) ? 1UL : 0UL); +} + +/** + * @brief Get Shift operation pending flag + * @rmtoll ISR SHPF LL_RTC_IsActiveFlag_SHP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_SHP(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_SHPF) == (RTC_ISR_SHPF)) ? 1UL : 0UL); +} + +/** + * @brief Get Wakeup timer write flag + * @rmtoll ISR WUTWF LL_RTC_IsActiveFlag_WUTW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_WUTW(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_WUTWF) == (RTC_ISR_WUTWF)) ? 1UL : 0UL); +} + +/** + * @brief Get Alarm A write flag + * @rmtoll ISR ALRAWF LL_RTC_IsActiveFlag_ALRAW + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsActiveFlag_ALRAW(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->ISR, RTC_ISR_ALRAWF) == (RTC_ISR_ALRAWF)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup RTC_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR TSIE LL_RTC_EnableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TS(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Disable Time-stamp interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR TSIE LL_RTC_DisableIT_TS + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TS(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_TSIE); +} + +/** + * @brief Enable Wakeup timer interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR WUTIE LL_RTC_EnableIT_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_WUT(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_WUTIE); +} + +/** + * @brief Disable Wakeup timer interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR WUTIE LL_RTC_DisableIT_WUT + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_WUT(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_WUTIE); +} + +/** + * @brief Enable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRAIE LL_RTC_EnableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_ALRA(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Disable Alarm A interrupt + * @note Bit is write-protected. @ref LL_RTC_DisableWriteProtection function should be called before. + * @rmtoll CR ALRAIE LL_RTC_DisableIT_ALRA + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_ALRA(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->CR, RTC_CR_ALRAIE); +} + +/** + * @brief Enable Tamper 1 interrupt + * @rmtoll TAMPCR TAMP1IE LL_RTC_EnableIT_TAMP1 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP1(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMP1IE); +} + +/** + * @brief Disable Tamper 1 interrupt + * @rmtoll TAMPCR TAMP1IE LL_RTC_DisableIT_TAMP1 + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP1(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMP1IE); +} + +/** + * @brief Enable all Tamper Interrupt + * @rmtoll TAMPCR TAMPIE LL_RTC_EnableIT_TAMP + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_EnableIT_TAMP(RTC_TypeDef *RTCx) +{ + SET_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMPIE); +} + +/** + * @brief Disable all Tamper Interrupt + * @rmtoll TAMPCR TAMPIE LL_RTC_DisableIT_TAMP + * @param RTCx RTC Instance + * @retval None + */ +__STATIC_INLINE void LL_RTC_DisableIT_TAMP(RTC_TypeDef *RTCx) +{ + CLEAR_BIT(RTCx->TAMPCR, RTC_TAMPCR_TAMPIE); +} + +/** + * @brief Check if Time-stamp interrupt is enabled or not + * @rmtoll CR TSIE LL_RTC_IsEnabledIT_TS + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TS(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_TSIE) == (RTC_CR_TSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Wakeup timer interrupt is enabled or not + * @rmtoll CR WUTIE LL_RTC_IsEnabledIT_WUT + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_WUT(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_WUTIE) == (RTC_CR_WUTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Alarm A interrupt is enabled or not + * @rmtoll CR ALRAIE LL_RTC_IsEnabledIT_ALRA + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_ALRA(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->CR, RTC_CR_ALRAIE) == (RTC_CR_ALRAIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tamper 1 interrupt is enabled or not + * @rmtoll TAMPCR TAMP1IE LL_RTC_IsEnabledIT_TAMP1 + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP1(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TAMPCR, + RTC_TAMPCR_TAMP1IE) == (RTC_TAMPCR_TAMP1IE)) ? 1UL : 0UL); +} + +/** + * @brief Check if all the TAMPER interrupts are enabled or not + * @rmtoll TAMPCR TAMPIE LL_RTC_IsEnabledIT_TAMP + * @param RTCx RTC Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_RTC_IsEnabledIT_TAMP(RTC_TypeDef *RTCx) +{ + return ((READ_BIT(RTCx->TAMPCR, + RTC_TAMPCR_TAMPIE) == (RTC_TAMPCR_TAMPIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup RTC_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct); +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct); +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct); +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct); +ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct); +void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct); +ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct); +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx); +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_RTC_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_spi.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_spi.h new file mode 100644 index 0000000000..21e47e0b0a --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_spi.h @@ -0,0 +1,2281 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_spi.h + * @author MCD Application Team + * @brief Header file of SPI LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_SPI_H +#define STM32WL3x_LL_SPI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (SPI1) || defined (SPI3) + +/** @defgroup SPI_LL SPI + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_ES_INIT SPI Exported Init structure + * @{ + */ + +/** + * @brief SPI Init structures definition + */ +typedef struct +{ + uint32_t TransferDirection; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_LL_EC_TRANSFER_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferDirection().*/ + + uint32_t Mode; /*!< Specifies the SPI mode (Master/Slave). + This parameter can be a value of @ref SPI_LL_EC_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetMode().*/ + + uint32_t DataWidth; /*!< Specifies the SPI data width. + This parameter can be a value of @ref SPI_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetDataWidth().*/ + + uint32_t ClockPolarity; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_LL_EC_POLARITY. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPolarity().*/ + + uint32_t ClockPhase; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_LL_EC_PHASE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetClockPhase().*/ + + uint32_t NSS; /*!< Specifies whether the NSS signal is managed by hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_LL_EC_NSS_MODE. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetNSSMode().*/ + + uint32_t BaudRate; /*!< Specifies the BaudRate prescaler value which will be used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_LL_EC_BAUDRATEPRESCALER. + @note The communication clock is derived from the master clock. The slave clock does not need to be set. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetBaudRatePrescaler().*/ + + uint32_t BitOrder; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_LL_EC_BIT_ORDER. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetTransferBitOrder().*/ + + uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. + This parameter can be a value of @ref SPI_LL_EC_CRC_CALCULATION. + + This feature can be modified afterwards using unitary functions @ref LL_SPI_EnableCRC() and @ref LL_SPI_DisableCRC().*/ + + uint32_t CRCPoly; /*!< Specifies the polynomial used for the CRC calculation. + This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function @ref LL_SPI_SetCRCPolynomial().*/ + +} LL_SPI_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Constants SPI Exported Constants + * @{ + */ + +/** @defgroup SPI_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_SPI_ReadReg function + * @{ + */ +#define LL_SPI_SR_RXNE SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_SPI_SR_TXE SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_SPI_SR_BSY SPI_SR_BSY /*!< Busy flag */ +#define LL_SPI_SR_CRCERR SPI_SR_CRCERR /*!< CRC error flag */ +#define LL_SPI_SR_MODF SPI_SR_MODF /*!< Mode fault flag */ +#define LL_SPI_SR_OVR SPI_SR_OVR /*!< Overrun flag */ +#define LL_SPI_SR_FRE SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_SPI_CR2_RXNEIE SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_SPI_CR2_TXEIE SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_SPI_CR2_ERRIE SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) /*!< Master configuration */ +#define LL_SPI_MODE_SLAVE 0x00000000U /*!< Slave configuration */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PROTOCOL Serial Protocol + * @{ + */ +#define LL_SPI_PROTOCOL_MOTOROLA 0x00000000U /*!< Motorola mode. Used as default value */ +#define LL_SPI_PROTOCOL_TI (SPI_CR2_FRF) /*!< TI mode */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_SPI_PHASE_1EDGE 0x00000000U /*!< First clock transition is the first data capture edge */ +#define LL_SPI_PHASE_2EDGE (SPI_CR1_CPHA) /*!< Second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_SPI_POLARITY_LOW 0x00000000U /*!< Clock to 0 when idle */ +#define LL_SPI_POLARITY_HIGH (SPI_CR1_CPOL) /*!< Clock to 1 when idle */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BAUDRATEPRESCALER Baud Rate Prescaler + * @{ + */ +#define LL_SPI_BAUDRATEPRESCALER_DIV2 0x00000000U /*!< BaudRate control equal to fPCLK/2 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV4 (SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/4 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV8 (SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/8 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV16 (SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/16 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV32 (SPI_CR1_BR_2) /*!< BaudRate control equal to fPCLK/32 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV64 (SPI_CR1_BR_2 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/64 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV128 (SPI_CR1_BR_2 | SPI_CR1_BR_1) /*!< BaudRate control equal to fPCLK/128 */ +#define LL_SPI_BAUDRATEPRESCALER_DIV256 (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) /*!< BaudRate control equal to fPCLK/256 */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_BIT_ORDER Transmission Bit Order + * @{ + */ +#define LL_SPI_LSB_FIRST (SPI_CR1_LSBFIRST) /*!< Data is transmitted/received with the LSB first */ +#define LL_SPI_MSB_FIRST 0x00000000U /*!< Data is transmitted/received with the MSB first */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TRANSFER_MODE Transfer Mode + * @{ + */ +#define LL_SPI_FULL_DUPLEX 0x00000000U /*!< Full-Duplex mode. Rx and Tx transfer on 2 lines */ +#define LL_SPI_SIMPLEX_RX (SPI_CR1_RXONLY) /*!< Simplex Rx mode. Rx transfer only on 1 line */ +#define LL_SPI_HALF_DUPLEX_RX (SPI_CR1_BIDIMODE) /*!< Half-Duplex Rx mode. Rx transfer on 1 line */ +#define LL_SPI_HALF_DUPLEX_TX (SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE) /*!< Half-Duplex Tx mode. Tx transfer on 1 line */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_NSS_MODE Slave Select Pin Mode + * @{ + */ +#define LL_SPI_NSS_SOFT (SPI_CR1_SSM) /*!< NSS managed internally. NSS pin not used and free */ +#define LL_SPI_NSS_HARD_INPUT 0x00000000U /*!< NSS pin used in Input. Only used in Master mode */ +#define LL_SPI_NSS_HARD_OUTPUT (((uint32_t)SPI_CR2_SSOE << 16U)) /*!< NSS pin used in Output. Only used in Slave mode as chip select */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_SPI_DATAWIDTH_4BIT (SPI_CR2_DS_0 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 4 bits */ +#define LL_SPI_DATAWIDTH_5BIT (SPI_CR2_DS_2) /*!< Data length for SPI transfer: 5 bits */ +#define LL_SPI_DATAWIDTH_6BIT (SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 6 bits */ +#define LL_SPI_DATAWIDTH_7BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 7 bits */ +#define LL_SPI_DATAWIDTH_8BIT (SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 8 bits */ +#define LL_SPI_DATAWIDTH_9BIT (SPI_CR2_DS_3) /*!< Data length for SPI transfer: 9 bits */ +#define LL_SPI_DATAWIDTH_10BIT (SPI_CR2_DS_3 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 10 bits */ +#define LL_SPI_DATAWIDTH_11BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 11 bits */ +#define LL_SPI_DATAWIDTH_12BIT (SPI_CR2_DS_3 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 12 bits */ +#define LL_SPI_DATAWIDTH_13BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2) /*!< Data length for SPI transfer: 13 bits */ +#define LL_SPI_DATAWIDTH_14BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 14 bits */ +#define LL_SPI_DATAWIDTH_15BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1) /*!< Data length for SPI transfer: 15 bits */ +#define LL_SPI_DATAWIDTH_16BIT (SPI_CR2_DS_3 | SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0) /*!< Data length for SPI transfer: 16 bits */ +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup SPI_LL_EC_CRC_CALCULATION CRC Calculation + * @{ + */ +#define LL_SPI_CRCCALCULATION_DISABLE 0x00000000U /*!< CRC calculation disabled */ +#define LL_SPI_CRCCALCULATION_ENABLE (SPI_CR1_CRCEN) /*!< CRC calculation enabled */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup SPI_LL_EC_CRC_LENGTH CRC Length + * @{ + */ +#define LL_SPI_CRC_8BIT 0x00000000U /*!< 8-bit CRC length */ +#define LL_SPI_CRC_16BIT (SPI_CR1_CRCL) /*!< 16-bit CRC length */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO_TH RX FIFO Threshold + * @{ + */ +#define LL_SPI_RX_FIFO_TH_HALF 0x00000000U /*!< RXNE event is generated if FIFO level is greater than or equal to 1/2 (16-bit) */ +#define LL_SPI_RX_FIFO_TH_QUARTER (SPI_CR2_FRXTH) /*!< RXNE event is generated if FIFO level is greater than or equal to 1/4 (8-bit) */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_RX_FIFO RX FIFO Level + * @{ + */ +#define LL_SPI_RX_FIFO_EMPTY 0x00000000U /*!< FIFO reception empty */ +#define LL_SPI_RX_FIFO_QUARTER_FULL (SPI_SR_FRLVL_0) /*!< FIFO reception 1/4 */ +#define LL_SPI_RX_FIFO_HALF_FULL (SPI_SR_FRLVL_1) /*!< FIFO reception 1/2 */ +#define LL_SPI_RX_FIFO_FULL (SPI_SR_FRLVL_1 | SPI_SR_FRLVL_0) /*!< FIFO reception full */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_TX_FIFO TX FIFO Level + * @{ + */ +#define LL_SPI_TX_FIFO_EMPTY 0x00000000U /*!< FIFO transmission empty */ +#define LL_SPI_TX_FIFO_QUARTER_FULL (SPI_SR_FTLVL_0) /*!< FIFO transmission 1/4 */ +#define LL_SPI_TX_FIFO_HALF_FULL (SPI_SR_FTLVL_1) /*!< FIFO transmission 1/2 */ +#define LL_SPI_TX_FIFO_FULL (SPI_SR_FTLVL_1 | SPI_SR_FTLVL_0) /*!< FIFO transmission full */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_DMA_PARITY DMA Parity + * @{ + */ +#define LL_SPI_DMA_PARITY_EVEN 0x00000000U /*!< Select DMA parity Even */ +#define LL_SPI_DMA_PARITY_ODD 0x00000001U /*!< Select DMA parity Odd */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Macros SPI Exported Macros + * @{ + */ + +/** @defgroup SPI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_SPI_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in SPI register + * @param __INSTANCE__ SPI Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_SPI_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_LL_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Enable SPI peripheral + * @rmtoll CR1 SPE LL_SPI_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Disable SPI peripheral + * @note When disabling the SPI, follow the procedure described in the Reference Manual. + * @rmtoll CR1 SPE LL_SPI_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Check if SPI peripheral is enabled + * @rmtoll CR1 SPE LL_SPI_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_SPE) == (SPI_CR1_SPE)) ? 1UL : 0UL); +} + +/** + * @brief Set SPI operation mode to Master or Slave + * @note This bit should not be changed when communication is ongoing. + * @rmtoll CR1 MSTR LL_SPI_SetMode\n + * CR1 SSI LL_SPI_SetMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI, Mode); +} + +/** + * @brief Get SPI operation mode (Master or Slave) + * @rmtoll CR1 MSTR LL_SPI_GetMode\n + * CR1 SSI LL_SPI_GetMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_MODE_MASTER + * @arg @ref LL_SPI_MODE_SLAVE + */ +__STATIC_INLINE uint32_t LL_SPI_GetMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_MSTR | SPI_CR1_SSI)); +} + +/** + * @brief Set serial protocol used + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR2 FRF LL_SPI_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRF, Standard); +} + +/** + * @brief Get serial protocol used + * @rmtoll CR2 FRF LL_SPI_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PROTOCOL_MOTOROLA + * @arg @ref LL_SPI_PROTOCOL_TI + */ +__STATIC_INLINE uint32_t LL_SPI_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRF)); +} + +/** + * @brief Set clock phase + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPHA LL_SPI_SetClockPhase + * @param SPIx SPI Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPhase(SPI_TypeDef *SPIx, uint32_t ClockPhase) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPHA, ClockPhase); +} + +/** + * @brief Get clock phase + * @rmtoll CR1 CPHA LL_SPI_GetClockPhase + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_PHASE_1EDGE + * @arg @ref LL_SPI_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPhase(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPHA)); +} + +/** + * @brief Set clock polarity + * @note This bit should not be changed when communication is ongoing. + * This bit is not used in SPI TI mode. + * @rmtoll CR1 CPOL LL_SPI_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CPOL, ClockPolarity); +} + +/** + * @brief Get clock polarity + * @rmtoll CR1 CPOL LL_SPI_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_POLARITY_LOW + * @arg @ref LL_SPI_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_SPI_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CPOL)); +} + +/** + * @brief Set baud rate prescaler + * @note These bits should not be changed when communication is ongoing. SPI BaudRate = fPCLK/Prescaler. + * @rmtoll CR1 BR LL_SPI_SetBaudRatePrescaler + * @param SPIx SPI Instance + * @param BaudRate This parameter can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetBaudRatePrescaler(SPI_TypeDef *SPIx, uint32_t BaudRate) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_BR, BaudRate); +} + +/** + * @brief Get baud rate prescaler + * @rmtoll CR1 BR LL_SPI_GetBaudRatePrescaler + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV2 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV4 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV8 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV16 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV32 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV64 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV128 + * @arg @ref LL_SPI_BAUDRATEPRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_SPI_GetBaudRatePrescaler(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_BR)); +} + +/** + * @brief Set transfer bit order + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR1 LSBFIRST LL_SPI_SetTransferBitOrder + * @param SPIx SPI Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferBitOrder(SPI_TypeDef *SPIx, uint32_t BitOrder) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_LSBFIRST, BitOrder); +} + +/** + * @brief Get transfer bit order + * @rmtoll CR1 LSBFIRST LL_SPI_GetTransferBitOrder + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_LSB_FIRST + * @arg @ref LL_SPI_MSB_FIRST + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferBitOrder(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_LSBFIRST)); +} + +/** + * @brief Set transfer direction mode + * @note For Half-Duplex mode, Rx Direction is set by default. + * In master mode, the MOSI pin is used and in slave mode, the MISO pin is used for Half-Duplex. + * @rmtoll CR1 RXONLY LL_SPI_SetTransferDirection\n + * CR1 BIDIMODE LL_SPI_SetTransferDirection\n + * CR1 BIDIOE LL_SPI_SetTransferDirection + * @param SPIx SPI Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetTransferDirection(SPI_TypeDef *SPIx, uint32_t TransferDirection) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE, TransferDirection); +} + +/** + * @brief Get transfer direction mode + * @rmtoll CR1 RXONLY LL_SPI_GetTransferDirection\n + * CR1 BIDIMODE LL_SPI_GetTransferDirection\n + * CR1 BIDIOE LL_SPI_GetTransferDirection + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_FULL_DUPLEX + * @arg @ref LL_SPI_SIMPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_RX + * @arg @ref LL_SPI_HALF_DUPLEX_TX + */ +__STATIC_INLINE uint32_t LL_SPI_GetTransferDirection(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_RXONLY | SPI_CR1_BIDIMODE | SPI_CR1_BIDIOE)); +} + +/** + * @brief Set frame data width + * @rmtoll CR2 DS LL_SPI_SetDataWidth + * @param SPIx SPI Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDataWidth(SPI_TypeDef *SPIx, uint32_t DataWidth) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_DS, DataWidth); +} + +/** + * @brief Get frame data width + * @rmtoll CR2 DS LL_SPI_GetDataWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DATAWIDTH_4BIT + * @arg @ref LL_SPI_DATAWIDTH_5BIT + * @arg @ref LL_SPI_DATAWIDTH_6BIT + * @arg @ref LL_SPI_DATAWIDTH_7BIT + * @arg @ref LL_SPI_DATAWIDTH_8BIT + * @arg @ref LL_SPI_DATAWIDTH_9BIT + * @arg @ref LL_SPI_DATAWIDTH_10BIT + * @arg @ref LL_SPI_DATAWIDTH_11BIT + * @arg @ref LL_SPI_DATAWIDTH_12BIT + * @arg @ref LL_SPI_DATAWIDTH_13BIT + * @arg @ref LL_SPI_DATAWIDTH_14BIT + * @arg @ref LL_SPI_DATAWIDTH_15BIT + * @arg @ref LL_SPI_DATAWIDTH_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetDataWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_DS)); +} + +/** + * @brief Set threshold of RXFIFO that triggers an RXNE event + * @rmtoll CR2 FRXTH LL_SPI_SetRxFIFOThreshold + * @param SPIx SPI Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_TH_HALF + * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetRxFIFOThreshold(SPI_TypeDef *SPIx, uint32_t Threshold) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_FRXTH, Threshold); +} + +/** + * @brief Get threshold of RXFIFO that triggers an RXNE event + * @rmtoll CR2 FRXTH LL_SPI_GetRxFIFOThreshold + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_TH_HALF + * @arg @ref LL_SPI_RX_FIFO_TH_QUARTER + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOThreshold(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_FRXTH)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_CRC_Management CRC Management + * @{ + */ + +/** + * @brief Enable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_EnableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableCRC(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Disable CRC + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_DisableCRC + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableCRC(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR1, SPI_CR1_CRCEN); +} + +/** + * @brief Check if CRC is enabled + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCEN LL_SPI_IsEnabledCRC + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledCRC(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR1, SPI_CR1_CRCEN) == (SPI_CR1_CRCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set CRC Length + * @note This bit should be written only when SPI is disabled (SPE = 0) for correct operation. + * @rmtoll CR1 CRCL LL_SPI_SetCRCWidth + * @param SPIx SPI Instance + * @param CRCLength This parameter can be one of the following values: + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_16BIT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCWidth(SPI_TypeDef *SPIx, uint32_t CRCLength) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_CRCL, CRCLength); +} + +/** + * @brief Get CRC Length + * @rmtoll CR1 CRCL LL_SPI_GetCRCWidth + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_CRC_8BIT + * @arg @ref LL_SPI_CRC_16BIT + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCWidth(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR1, SPI_CR1_CRCL)); +} + +/** + * @brief Set CRCNext to transfer CRC on the line + * @note This bit has to be written as soon as the last data is written in the SPIx_DR register. + * @rmtoll CR1 CRCNEXT LL_SPI_SetCRCNext + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCNext(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR1, SPI_CR1_CRCNEXT); +} + +/** + * @brief Set polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_SetCRCPolynomial + * @param SPIx SPI Instance + * @param CRCPoly This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetCRCPolynomial(SPI_TypeDef *SPIx, uint32_t CRCPoly) +{ + WRITE_REG(SPIx->CRCPR, (uint16_t)CRCPoly); +} + +/** + * @brief Get polynomial for CRC calculation + * @rmtoll CRCPR CRCPOLY LL_SPI_GetCRCPolynomial + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetCRCPolynomial(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->CRCPR)); +} + +/** + * @brief Get Rx CRC + * @rmtoll RXCRCR RXCRC LL_SPI_GetRxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->RXCRCR)); +} + +/** + * @brief Get Tx CRC + * @rmtoll TXCRCR TXCRC LL_SPI_GetTxCRC + * @param SPIx SPI Instance + * @retval Returned value is a number between Min_Data = 0x00 and Max_Data = 0xFFFF + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxCRC(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_REG(SPIx->TXCRCR)); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_NSS_Management Slave Select Pin Management + * @{ + */ + +/** + * @brief Set NSS mode + * @note LL_SPI_NSS_SOFT Mode is not used in SPI TI mode. + * @rmtoll CR1 SSM LL_SPI_SetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_SetNSSMode + * @param SPIx SPI Instance + * @param NSS This parameter can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetNSSMode(SPI_TypeDef *SPIx, uint32_t NSS) +{ + MODIFY_REG(SPIx->CR1, SPI_CR1_SSM, NSS); + MODIFY_REG(SPIx->CR2, SPI_CR2_SSOE, ((uint32_t)(NSS >> 16U))); +} + +/** + * @brief Get NSS mode + * @rmtoll CR1 SSM LL_SPI_GetNSSMode\n + * @rmtoll CR2 SSOE LL_SPI_GetNSSMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_NSS_SOFT + * @arg @ref LL_SPI_NSS_HARD_INPUT + * @arg @ref LL_SPI_NSS_HARD_OUTPUT + */ +__STATIC_INLINE uint32_t LL_SPI_GetNSSMode(SPI_TypeDef *SPIx) +{ + uint32_t Ssm = (READ_BIT(SPIx->CR1, SPI_CR1_SSM)); + uint32_t Ssoe = (READ_BIT(SPIx->CR2, SPI_CR2_SSOE) << 16U); + return (Ssm | Ssoe); +} + +/** + * @brief Enable NSS pulse management + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_EnableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_NSSP); +} + +/** + * @brief Disable NSS pulse management + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_DisableNSSPulseMgt + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableNSSPulseMgt(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_NSSP); +} + +/** + * @brief Check if NSS pulse is enabled + * @note This bit should not be changed when communication is ongoing. This bit is not used in SPI TI mode. + * @rmtoll CR2 NSSP LL_SPI_IsEnabledNSSPulse + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledNSSPulse(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_NSSP) == (SPI_CR2_NSSP)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_FLAG_Management FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_SPI_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_RXNE) == (SPI_SR_RXNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_SPI_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_TXE) == (SPI_SR_TXE)) ? 1UL : 0UL); +} + +/** + * @brief Get CRC error flag + * @rmtoll SR CRCERR LL_SPI_IsActiveFlag_CRCERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_CRCERR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CRCERR) == (SPI_SR_CRCERR)) ? 1UL : 0UL); +} + +/** + * @brief Get mode fault error flag + * @rmtoll SR MODF LL_SPI_IsActiveFlag_MODF + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_MODF(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_MODF) == (SPI_SR_MODF)) ? 1UL : 0UL); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_SPI_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_OVR) == (SPI_SR_OVR)) ? 1UL : 0UL); +} + +/** + * @brief Get busy flag + * @note The BSY flag is cleared under any one of the following conditions: + * -When the SPI is correctly disabled + * -When a fault is detected in Master mode (MODF bit set to 1) + * -In Master mode, when it finishes a data transmission and no new data is ready to be + * sent + * -In Slave mode, when the BSY flag is set to '0' for at least one SPI clock cycle between + * each data transfer. + * @rmtoll SR BSY LL_SPI_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_BSY) == (SPI_SR_BSY)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_SPI_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_FRE) == (SPI_SR_FRE)) ? 1UL : 0UL); +} + +/** + * @brief Get FIFO reception Level + * @rmtoll SR FRLVL LL_SPI_GetRxFIFOLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_RX_FIFO_EMPTY + * @arg @ref LL_SPI_RX_FIFO_QUARTER_FULL + * @arg @ref LL_SPI_RX_FIFO_HALF_FULL + * @arg @ref LL_SPI_RX_FIFO_FULL + */ +__STATIC_INLINE uint32_t LL_SPI_GetRxFIFOLevel(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FRLVL)); +} + +/** + * @brief Get FIFO Transmission Level + * @rmtoll SR FTLVL LL_SPI_GetTxFIFOLevel + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_TX_FIFO_EMPTY + * @arg @ref LL_SPI_TX_FIFO_QUARTER_FULL + * @arg @ref LL_SPI_TX_FIFO_HALF_FULL + * @arg @ref LL_SPI_TX_FIFO_FULL + */ +__STATIC_INLINE uint32_t LL_SPI_GetTxFIFOLevel(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->SR, SPI_SR_FTLVL)); +} + +/** + * @brief Clear CRC error flag + * @rmtoll SR CRCERR LL_SPI_ClearFlag_CRCERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_CRCERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->SR, SPI_SR_CRCERR); +} + +/** + * @brief Clear mode fault error flag + * @note Clearing this flag is done by a read access to the SPIx_SR + * register followed by a write access to the SPIx_CR1 register + * @rmtoll SR MODF LL_SPI_ClearFlag_MODF + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_MODF(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg_sr; + tmpreg_sr = SPIx->SR; + (void) tmpreg_sr; + CLEAR_BIT(SPIx->CR1, SPI_CR1_SPE); +} + +/** + * @brief Clear overrun error flag + * @note Clearing this flag is done by a read access to the SPIx_DR + * register followed by a read access to the SPIx_SR register + * @rmtoll SR OVR LL_SPI_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->DR; + (void) tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @brief Clear frame format error flag + * @note Clearing this flag is done by reading SPIx_SR register + * @rmtoll SR FRE LL_SPI_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void) tmpreg; +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_IT_Management Interrupt Management + * @{ + */ + +/** + * @brief Enable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Enable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Enable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Disable error interrupt + * @note This bit controls the generation of an interrupt when an error condition occurs (CRCERR, OVR, MODF in SPI mode, FRE at TI mode). + * @rmtoll CR2 ERRIE LL_SPI_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_ERRIE); +} + +/** + * @brief Disable Rx buffer not empty interrupt + * @rmtoll CR2 RXNEIE LL_SPI_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXNEIE); +} + +/** + * @brief Disable Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXEIE); +} + +/** + * @brief Check if error interrupt is enabled + * @rmtoll CR2 ERRIE LL_SPI_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_ERRIE) == (SPI_CR2_ERRIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Rx buffer not empty interrupt is enabled + * @rmtoll CR2 RXNEIE LL_SPI_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_RXNEIE) == (SPI_CR2_RXNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if Tx buffer empty interrupt + * @rmtoll CR2 TXEIE LL_SPI_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_TXEIE) == (SPI_CR2_TXEIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DMA_Management DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_SPI_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_RXDMAEN); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_SPI_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_RXDMAEN) == (SPI_CR2_RXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_SPI_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_SPI_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->CR2, SPI_CR2_TXDMAEN); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_SPI_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SPI_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->CR2, SPI_CR2_TXDMAEN) == (SPI_CR2_TXDMAEN)) ? 1UL : 0UL); +} + +/** + * @brief Set parity of Last DMA reception + * @rmtoll CR2 LDMARX LL_SPI_SetDMAParity_RX + * @param SPIx SPI Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDMAParity_RX(SPI_TypeDef *SPIx, uint32_t Parity) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_LDMARX, (Parity << SPI_CR2_LDMARX_Pos)); +} + +/** + * @brief Get parity configuration for Last DMA reception + * @rmtoll CR2 LDMARX LL_SPI_GetDMAParity_RX + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + */ +__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_RX(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMARX) >> SPI_CR2_LDMARX_Pos); +} + +/** + * @brief Set parity of Last DMA transmission + * @rmtoll CR2 LDMATX LL_SPI_SetDMAParity_TX + * @param SPIx SPI Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + * @retval None + */ +__STATIC_INLINE void LL_SPI_SetDMAParity_TX(SPI_TypeDef *SPIx, uint32_t Parity) +{ + MODIFY_REG(SPIx->CR2, SPI_CR2_LDMATX, (Parity << SPI_CR2_LDMATX_Pos)); +} + +/** + * @brief Get parity configuration for Last DMA transmission + * @rmtoll CR2 LDMATX LL_SPI_GetDMAParity_TX + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_SPI_DMA_PARITY_ODD + * @arg @ref LL_SPI_DMA_PARITY_EVEN + */ +__STATIC_INLINE uint32_t LL_SPI_GetDMAParity_TX(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->CR2, SPI_CR2_LDMATX) >> SPI_CR2_LDMATX_Pos); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll DR DR LL_SPI_DMA_GetRegAddr + * @param SPIx SPI Instance + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx) +{ + return (uint32_t) &(SPIx->DR); +} + +/** + * @} + */ + +/** @defgroup SPI_LL_EF_DATA_Management DATA Management + * @{ + */ + +/** + * @brief Read 8-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData8 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx) +{ + return (*((__IO uint8_t *)&SPIx->DR)); +} + +/** + * @brief Read 16-Bits in the data register + * @rmtoll DR DR LL_SPI_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_SPI_ReceiveData16(SPI_TypeDef *SPIx) +{ + return (uint16_t)(READ_REG(SPIx->DR)); +} + +/** + * @brief Write 8-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData8 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData8(SPI_TypeDef *SPIx, uint8_t TxData) +{ +#if defined (__GNUC__) + __IO uint8_t *spidr = ((__IO uint8_t *)&SPIx->DR); + *spidr = TxData; +#else + *((__IO uint8_t *)&SPIx->DR) = TxData; +#endif /* __GNUC__ */ +} + +/** + * @brief Write 16-Bits in the data register + * @rmtoll DR DR LL_SPI_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x00 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_SPI_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ +#if defined (__GNUC__) + __IO uint16_t *spidr = ((__IO uint16_t *)&SPIx->DR); + *spidr = TxData; +#else + SPIx->DR = TxData; +#endif /* __GNUC__ */ +} + +/** + * @} + */ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SPI_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct); +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup I2S_LL I2S + * @{ + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_ES_INIT I2S Exported Init structure + * @{ + */ + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + uint32_t Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref I2S_LL_EC_MODE + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetTransferMode().*/ + + uint32_t Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_STANDARD + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetStandard().*/ + + + uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_DATA_FORMAT + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetDataFormat().*/ + + + uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref I2S_LL_EC_MCLK_OUTPUT + + This feature can be modified afterwards using unitary functions @ref LL_I2S_EnableMasterClock() or @ref LL_I2S_DisableMasterClock.*/ + + + uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref I2S_LL_EC_AUDIO_FREQ + + Audio Frequency can be modified afterwards using Reference manual formulas to calculate Prescaler Linear, Parity + and unitary functions @ref LL_I2S_SetPrescalerLinear() and @ref LL_I2S_SetPrescalerParity() to set it.*/ + + + uint32_t ClockPolarity; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref I2S_LL_EC_POLARITY + + This feature can be modified afterwards using unitary function @ref LL_I2S_SetClockPolarity().*/ + +} LL_I2S_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Constants I2S Exported Constants + * @{ + */ + +/** @defgroup I2S_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_I2S_ReadReg function + * @{ + */ +#define LL_I2S_SR_RXNE LL_SPI_SR_RXNE /*!< Rx buffer not empty flag */ +#define LL_I2S_SR_TXE LL_SPI_SR_TXE /*!< Tx buffer empty flag */ +#define LL_I2S_SR_BSY LL_SPI_SR_BSY /*!< Busy flag */ +#define LL_I2S_SR_UDR SPI_SR_UDR /*!< Underrun flag */ +#define LL_I2S_SR_OVR LL_SPI_SR_OVR /*!< Overrun flag */ +#define LL_I2S_SR_FRE LL_SPI_SR_FRE /*!< TI mode frame format error flag */ +/** + * @} + */ + +/** @defgroup SPI_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_SPI_ReadReg and LL_SPI_WriteReg functions + * @{ + */ +#define LL_I2S_CR2_RXNEIE LL_SPI_CR2_RXNEIE /*!< Rx buffer not empty interrupt enable */ +#define LL_I2S_CR2_TXEIE LL_SPI_CR2_TXEIE /*!< Tx buffer empty interrupt enable */ +#define LL_I2S_CR2_ERRIE LL_SPI_CR2_ERRIE /*!< Error interrupt enable */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_DATA_FORMAT Data format + * @{ + */ +#define LL_I2S_DATAFORMAT_16B 0x00000000U /*!< Data length 16 bits, Channel length 16bit */ +#define LL_I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) /*!< Data length 16 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_24B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0) /*!< Data length 24 bits, Channel length 32bit */ +#define LL_I2S_DATAFORMAT_32B (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1) /*!< Data length 16 bits, Channel length 32bit */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_I2S_POLARITY_LOW 0x00000000U /*!< Clock steady state is low level */ +#define LL_I2S_POLARITY_HIGH (SPI_I2SCFGR_CKPOL) /*!< Clock steady state is high level */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_STANDARD I2s Standard + * @{ + */ +#define LL_I2S_STANDARD_PHILIPS 0x00000000U /*!< I2S standard philips */ +#define LL_I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) /*!< MSB justified standard (left justified) */ +#define LL_I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) /*!< LSB justified standard (right justified) */ +#define LL_I2S_STANDARD_PCM_SHORT (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1) /*!< PCM standard, short frame synchronization */ +#define LL_I2S_STANDARD_PCM_LONG (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC) /*!< PCM standard, long frame synchronization */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_MODE Operation Mode + * @{ + */ +#define LL_I2S_MODE_SLAVE_TX 0x00000000U /*!< Slave Tx configuration */ +#define LL_I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) /*!< Slave Rx configuration */ +#define LL_I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) /*!< Master Tx configuration */ +#define LL_I2S_MODE_MASTER_RX (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1) /*!< Master Rx configuration */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_PRESCALER_FACTOR Prescaler Factor + * @{ + */ +#define LL_I2S_PRESCALER_PARITY_EVEN 0x00000000U /*!< Odd factor: Real divider value is = I2SDIV * 2 */ +#define LL_I2S_PRESCALER_PARITY_ODD (SPI_I2SPR_ODD >> 8U) /*!< Odd factor: Real divider value is = (I2SDIV * 2)+1 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) + +/** @defgroup I2S_LL_EC_MCLK_OUTPUT MCLK Output + * @{ + */ +#define LL_I2S_MCLK_OUTPUT_DISABLE 0x00000000U /*!< Master clock output is disabled */ +#define LL_I2S_MCLK_OUTPUT_ENABLE (SPI_I2SPR_MCKOE) /*!< Master clock output is enabled */ +/** + * @} + */ + +/** @defgroup I2S_LL_EC_AUDIO_FREQ Audio Frequency + * @{ + */ + +#define LL_I2S_AUDIOFREQ_192K 192000U /*!< Audio Frequency configuration 192000 Hz */ +#define LL_I2S_AUDIOFREQ_96K 96000U /*!< Audio Frequency configuration 96000 Hz */ +#define LL_I2S_AUDIOFREQ_48K 48000U /*!< Audio Frequency configuration 48000 Hz */ +#define LL_I2S_AUDIOFREQ_44K 44100U /*!< Audio Frequency configuration 44100 Hz */ +#define LL_I2S_AUDIOFREQ_32K 32000U /*!< Audio Frequency configuration 32000 Hz */ +#define LL_I2S_AUDIOFREQ_22K 22050U /*!< Audio Frequency configuration 22050 Hz */ +#define LL_I2S_AUDIOFREQ_16K 16000U /*!< Audio Frequency configuration 16000 Hz */ +#define LL_I2S_AUDIOFREQ_11K 11025U /*!< Audio Frequency configuration 11025 Hz */ +#define LL_I2S_AUDIOFREQ_8K 8000U /*!< Audio Frequency configuration 8000 Hz */ +#define LL_I2S_AUDIOFREQ_DEFAULT 2U /*!< Audio Freq not specified. Register I2SDIV = 2 */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Exported_Macros I2S Exported Macros + * @{ + */ + +/** @defgroup I2S_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_I2S_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in I2S register + * @param __INSTANCE__ I2S Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_I2S_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2S_LL_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_LL_EF_Configuration Configuration + * @{ + */ + +/** + * @brief Select I2S mode and Enable I2S peripheral + * @rmtoll I2SCFGR I2SMOD LL_I2S_Enable\n + * I2SCFGR I2SE LL_I2S_Enable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Enable(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Disable I2S peripheral + * @rmtoll I2SCFGR I2SE LL_I2S_Disable + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_Disable(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD | SPI_I2SCFGR_I2SE); +} + +/** + * @brief Check if I2S peripheral is enabled + * @rmtoll I2SCFGR I2SE LL_I2S_IsEnabled + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabled(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SE) == (SPI_I2SCFGR_I2SE)) ? 1UL : 0UL); +} + +/** + * @brief Set I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_SetDataFormat\n + * I2SCFGR CHLEN LL_I2S_SetDataFormat + * @param SPIx SPI Instance + * @param DataFormat This parameter can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetDataFormat(SPI_TypeDef *SPIx, uint32_t DataFormat) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN, DataFormat); +} + +/** + * @brief Get I2S data frame length + * @rmtoll I2SCFGR DATLEN LL_I2S_GetDataFormat\n + * I2SCFGR CHLEN LL_I2S_GetDataFormat + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_DATAFORMAT_16B + * @arg @ref LL_I2S_DATAFORMAT_16B_EXTENDED + * @arg @ref LL_I2S_DATAFORMAT_24B + * @arg @ref LL_I2S_DATAFORMAT_32B + */ +__STATIC_INLINE uint32_t LL_I2S_GetDataFormat(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)); +} + +/** + * @brief Set I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_SetClockPolarity + * @param SPIx SPI Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetClockPolarity(SPI_TypeDef *SPIx, uint32_t ClockPolarity) +{ + SET_BIT(SPIx->I2SCFGR, ClockPolarity); +} + +/** + * @brief Get I2S clock polarity + * @rmtoll I2SCFGR CKPOL LL_I2S_GetClockPolarity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_POLARITY_LOW + * @arg @ref LL_I2S_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_I2S_GetClockPolarity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_CKPOL)); +} + +/** + * @brief Set I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_SetStandard\n + * I2SCFGR PCMSYNC LL_I2S_SetStandard + * @param SPIx SPI Instance + * @param Standard This parameter can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetStandard(SPI_TypeDef *SPIx, uint32_t Standard) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC, Standard); +} + +/** + * @brief Get I2S standard protocol + * @rmtoll I2SCFGR I2SSTD LL_I2S_GetStandard\n + * I2SCFGR PCMSYNC LL_I2S_GetStandard + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_STANDARD_PHILIPS + * @arg @ref LL_I2S_STANDARD_MSB + * @arg @ref LL_I2S_STANDARD_LSB + * @arg @ref LL_I2S_STANDARD_PCM_SHORT + * @arg @ref LL_I2S_STANDARD_PCM_LONG + */ +__STATIC_INLINE uint32_t LL_I2S_GetStandard(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC)); +} + +/** + * @brief Set I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_SetTransferMode + * @param SPIx SPI Instance + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetTransferMode(SPI_TypeDef *SPIx, uint32_t Mode) +{ + MODIFY_REG(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG, Mode); +} + +/** + * @brief Get I2S transfer mode + * @rmtoll I2SCFGR I2SCFG LL_I2S_GetTransferMode + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_MODE_SLAVE_TX + * @arg @ref LL_I2S_MODE_SLAVE_RX + * @arg @ref LL_I2S_MODE_MASTER_TX + * @arg @ref LL_I2S_MODE_MASTER_RX + */ +__STATIC_INLINE uint32_t LL_I2S_GetTransferMode(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SCFG)); +} + +/** + * @brief Set I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_SetPrescalerLinear + * @param SPIx SPI Instance + * @param PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerLinear(SPI_TypeDef *SPIx, uint8_t PrescalerLinear) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV, PrescalerLinear); +} + +/** + * @brief Get I2S linear prescaler + * @rmtoll I2SPR I2SDIV LL_I2S_GetPrescalerLinear + * @param SPIx SPI Instance + * @retval PrescalerLinear Value between Min_Data=0x02 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerLinear(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_I2SDIV)); +} + +/** + * @brief Set I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_SetPrescalerParity + * @param SPIx SPI Instance + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_I2S_SetPrescalerParity(SPI_TypeDef *SPIx, uint32_t PrescalerParity) +{ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_ODD, PrescalerParity << 8U); +} + +/** + * @brief Get I2S parity prescaler + * @rmtoll I2SPR ODD LL_I2S_GetPrescalerParity + * @param SPIx SPI Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_I2S_GetPrescalerParity(SPI_TypeDef *SPIx) +{ + return (uint32_t)(READ_BIT(SPIx->I2SPR, SPI_I2SPR_ODD) >> 8U); +} + +/** + * @brief Enable the master clock output (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_EnableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableMasterClock(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Disable the master clock output (Pin MCK) + * @rmtoll I2SPR MCKOE LL_I2S_DisableMasterClock + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableMasterClock(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE); +} + +/** + * @brief Check if the master clock output (Pin MCK) is enabled + * @rmtoll I2SPR MCKOE LL_I2S_IsEnabledMasterClock + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledMasterClock(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SPR, SPI_I2SPR_MCKOE) == (SPI_I2SPR_MCKOE)) ? 1UL : 0UL); +} + +#if defined(SPI_I2SCFGR_ASTRTEN) +/** + * @brief Enable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_EnableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableAsyncStart(SPI_TypeDef *SPIx) +{ + SET_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Disable asynchronous start + * @rmtoll I2SCFGR ASTRTEN LL_I2S_DisableAsyncStart + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableAsyncStart(SPI_TypeDef *SPIx) +{ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN); +} + +/** + * @brief Check if asynchronous start is enabled + * @rmtoll I2SCFGR ASTRTEN LL_I2S_IsEnabledAsyncStart + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledAsyncStart(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_ASTRTEN) == (SPI_I2SCFGR_ASTRTEN)) ? 1UL : 0UL); +} +#endif /* SPI_I2SCFGR_ASTRTEN */ + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_FLAG FLAG Management + * @{ + */ + +/** + * @brief Check if Rx buffer is not empty + * @rmtoll SR RXNE LL_I2S_IsActiveFlag_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_RXNE(SPIx); +} + +/** + * @brief Check if Tx buffer is empty + * @rmtoll SR TXE LL_I2S_IsActiveFlag_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_TXE(SPIx); +} + +/** + * @brief Get busy flag + * @rmtoll SR BSY LL_I2S_IsActiveFlag_BSY + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_BSY(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_BSY(SPIx); +} + +/** + * @brief Get overrun error flag + * @rmtoll SR OVR LL_I2S_IsActiveFlag_OVR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_OVR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_OVR(SPIx); +} + +/** + * @brief Get underrun error flag + * @rmtoll SR UDR LL_I2S_IsActiveFlag_UDR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_UDR(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_UDR) == (SPI_SR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Get frame format error flag + * @rmtoll SR FRE LL_I2S_IsActiveFlag_FRE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_FRE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsActiveFlag_FRE(SPIx); +} + +/** + * @brief Get channel side flag. + * @note 0: Channel Left has to be transmitted or has been received\n + * 1: Channel Right has to be transmitted or has been received\n + * It has no significance in PCM mode. + * @rmtoll SR CHSIDE LL_I2S_IsActiveFlag_CHSIDE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsActiveFlag_CHSIDE(SPI_TypeDef *SPIx) +{ + return ((READ_BIT(SPIx->SR, SPI_SR_CHSIDE) == (SPI_SR_CHSIDE)) ? 1UL : 0UL); +} + +/** + * @brief Clear overrun error flag + * @rmtoll SR OVR LL_I2S_ClearFlag_OVR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_OVR(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_OVR(SPIx); +} + +/** + * @brief Clear underrun error flag + * @rmtoll SR UDR LL_I2S_ClearFlag_UDR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_UDR(SPI_TypeDef *SPIx) +{ + __IO uint32_t tmpreg; + tmpreg = SPIx->SR; + (void)tmpreg; +} + +/** + * @brief Clear frame format error flag + * @rmtoll SR FRE LL_I2S_ClearFlag_FRE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_ClearFlag_FRE(SPI_TypeDef *SPIx) +{ + LL_SPI_ClearFlag_FRE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_IT Interrupt Management + * @{ + */ + +/** + * @brief Enable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_EnableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_ERR(SPIx); +} + +/** + * @brief Enable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_EnableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_RXNE(SPIx); +} + +/** + * @brief Enable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_EnableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableIT_TXE(SPIx); +} + +/** + * @brief Disable error IT + * @note This bit controls the generation of an interrupt when an error condition occurs (OVR, UDR and FRE in I2S mode). + * @rmtoll CR2 ERRIE LL_I2S_DisableIT_ERR + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_ERR(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_ERR(SPIx); +} + +/** + * @brief Disable Rx buffer not empty IT + * @rmtoll CR2 RXNEIE LL_I2S_DisableIT_RXNE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_RXNE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_RXNE(SPIx); +} + +/** + * @brief Disable Tx buffer empty IT + * @rmtoll CR2 TXEIE LL_I2S_DisableIT_TXE + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableIT_TXE(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableIT_TXE(SPIx); +} + +/** + * @brief Check if ERR IT is enabled + * @rmtoll CR2 ERRIE LL_I2S_IsEnabledIT_ERR + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_ERR(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_ERR(SPIx); +} + +/** + * @brief Check if RXNE IT is enabled + * @rmtoll CR2 RXNEIE LL_I2S_IsEnabledIT_RXNE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_RXNE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_RXNE(SPIx); +} + +/** + * @brief Check if TXE IT is enabled + * @rmtoll CR2 TXEIE LL_I2S_IsEnabledIT_TXE + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledIT_TXE(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledIT_TXE(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DMA DMA Management + * @{ + */ + +/** + * @brief Enable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_EnableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_RX(SPIx); +} + +/** + * @brief Disable DMA Rx + * @rmtoll CR2 RXDMAEN LL_I2S_DisableDMAReq_RX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_RX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_RX(SPIx); +} + +/** + * @brief Check if DMA Rx is enabled + * @rmtoll CR2 RXDMAEN LL_I2S_IsEnabledDMAReq_RX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_RX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_RX(SPIx); +} + +/** + * @brief Enable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_EnableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_EnableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_EnableDMAReq_TX(SPIx); +} + +/** + * @brief Disable DMA Tx + * @rmtoll CR2 TXDMAEN LL_I2S_DisableDMAReq_TX + * @param SPIx SPI Instance + * @retval None + */ +__STATIC_INLINE void LL_I2S_DisableDMAReq_TX(SPI_TypeDef *SPIx) +{ + LL_SPI_DisableDMAReq_TX(SPIx); +} + +/** + * @brief Check if DMA Tx is enabled + * @rmtoll CR2 TXDMAEN LL_I2S_IsEnabledDMAReq_TX + * @param SPIx SPI Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_I2S_IsEnabledDMAReq_TX(SPI_TypeDef *SPIx) +{ + return LL_SPI_IsEnabledDMAReq_TX(SPIx); +} + +/** + * @} + */ + +/** @defgroup I2S_LL_EF_DATA DATA Management + * @{ + */ + +/** + * @brief Read 16-Bits in data register + * @rmtoll DR DR LL_I2S_ReceiveData16 + * @param SPIx SPI Instance + * @retval RxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + */ +__STATIC_INLINE uint16_t LL_I2S_ReceiveData16(SPI_TypeDef *SPIx) +{ + return LL_SPI_ReceiveData16(SPIx); +} + +/** + * @brief Write 16-Bits in data register + * @rmtoll DR DR LL_I2S_TransmitData16 + * @param SPIx SPI Instance + * @param TxData Value between Min_Data=0x0000 and Max_Data=0xFFFF + * @retval None + */ +__STATIC_INLINE void LL_I2S_TransmitData16(SPI_TypeDef *SPIx, uint16_t TxData) +{ + LL_SPI_TransmitData16(SPIx, TxData); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup I2S_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx); +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct); +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (SPI1) || defined (SPI3) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_SPI_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_system.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_system.h new file mode 100644 index 0000000000..b0a77c7f20 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_system.h @@ -0,0 +1,1795 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_system.h + * @author MCD Application Team + * @brief Header file of SYSTEM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL SYSTEM driver contains a set of generic APIs that can be + used by user: + (+) Some of the FLASH features need to be handled in the SYSTEM file. + (+) Access to SYSCFG registers + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_SYSTEM_H +#define STM32WL3x_LL_SYSTEM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (FLASH) || defined (SYSCFG) + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SYSCFG_IO_LL_ES_INIT SYSTEM Exported Init structure + * @{ + */ +typedef struct +{ + + uint32_t Line; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range PA0 to PB15 + This parameter can be any combination of @ref EXTI_LL_EC_LINE */ + + FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ + + uint8_t Type; /*!< Specifies the type for the EXTI lines EDGE or LEVEL. + This parameter can be a value of @ref SYSTEM_LL_EC_TYPE. */ + + uint8_t Trigger; /*!< Specifies the trigger signal active edge/level for the EXTI lines. + This parameter can be a value of @ref SYSTEM_LL_EC_TRIGGER. */ +} LL_SYSCFG_IO_InitTypeDef; + +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants + * @{ + */ + +/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP + * @{ + */ +#define LL_SYSCFG_REMAP_FLASH 0x00000000U /*!< Main Flash memory mapped at 0x00000000 */ +#define LL_SYSCFG_REMAP_SRAM FLASH_CONFIG_REMAP /*!< SRAM mapped at 0x00000000 */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS + * @{ + */ +#if defined(SYSCFG_I2C_FMP_CTRL_I2C1_PA0_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA0 SYSCFG_I2C_FMP_CTRL_I2C1_PA0_FMP /*!< Enable Fast Mode Plus on PA0 */ +#endif +#if defined(SYSCFG_I2C_FMP_CTRL_I2C1_PA1_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA1 SYSCFG_I2C_FMP_CTRL_I2C1_PA1_FMP /*!< Enable Fast Mode Plus on PA1 */ +#endif +#if defined(SYSCFG_I2C_FMP_CTRL_I2C1_PB6_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_I2C_FMP_CTRL_I2C1_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */ +#endif +#if defined(SYSCFG_I2C_FMP_CTRL_I2C1_PB7_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_I2C_FMP_CTRL_I2C1_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */ +#endif +#if defined(SYSCFG_I2C_FMP_CTRL_I2C1_PB10_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB10 SYSCFG_I2C_FMP_CTRL_I2C1_PB10_FMP /*!< Enable Fast Mode Plus on PB10 */ +#endif +#if defined(SYSCFG_I2C_FMP_CTRL_I2C1_PB11_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PB11 SYSCFG_I2C_FMP_CTRL_I2C1_PB11_FMP /*!< Enable Fast Mode Plus on PB11 */ +#endif +#if defined(SYSCFG_I2C_FMP_CTRL_I2C2_PA6_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA6 SYSCFG_I2C_FMP_CTRL_I2C2_PA6_FMP /*!< Enable Fast Mode Plus on PA6 */ +#endif +#if defined(SYSCFG_I2C_FMP_CTRL_I2C2_PA7_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA7 SYSCFG_I2C_FMP_CTRL_I2C2_PA7_FMP /*!< Enable Fast Mode Plus on PA7 */ +#endif +#if defined(SYSCFG_I2C_FMP_CTRL_I2C2_PA13_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA13 SYSCFG_I2C_FMP_CTRL_I2C2_PA13_FMP /*!< Enable Fast Mode Plus on PA13 */ +#endif +#if defined(SYSCFG_I2C_FMP_CTRL_I2C2_PA14_FMP) +#define LL_SYSCFG_I2C_FASTMODEPLUS_PA14 SYSCFG_I2C_FMP_CTRL_I2C2_PA14_FMP /*!< Enable Fast Mode Plus on PA14 */ +#endif +/** + * @} + */ +/** @defgroup SYSTEM_LL_PWRC_IM SYSCFG Power Controller Interrupt MASK + * @{ + */ +#define LL_SYSCFG_PWRC_PVD SYSCFG_PWRC_IER_PVD_IE /*!< PVD interrupt mask */ +#define LL_SYSCFG_PWRC_WKUP SYSCFG_PWRC_IER_WKUP_IE /*!< WKUP interrupt mask */ +#define LL_SYSCFG_PWRC_BORH SYSCFG_PWRC_IER_BORH_IE /*!< BORH interrupt mask */ +/** + * @} + */ + +/** @defgroup SYSCFG_IO_LL_Exported_Constants EXTI Exported Constants + * @{ + */ + +/** @defgroup EXTI_LL_EC_LINE LINE + * @{ + */ +#define LL_EXTI_LINE_PA0 (uint32_t)(1U << 0U) /*!< PA0 */ +#define LL_EXTI_LINE_PA1 (uint32_t)(1U << 1U) /*!< PA1 */ +#define LL_EXTI_LINE_PA2 (uint32_t)(1U << 2U) /*!< PA2 */ +#define LL_EXTI_LINE_PA3 (uint32_t)(1U << 3U) /*!< PA3 */ +#define LL_EXTI_LINE_PA4 (uint32_t)(1U << 4U) /*!< PA4 */ +#define LL_EXTI_LINE_PA5 (uint32_t)(1U << 5U) /*!< PA5 */ +#define LL_EXTI_LINE_PA6 (uint32_t)(1U << 6U) /*!< PA6 */ +#define LL_EXTI_LINE_PA7 (uint32_t)(1U << 7U) /*!< PA7 */ +#define LL_EXTI_LINE_PA8 (uint32_t)(1U << 8U) /*!< PA8 */ +#define LL_EXTI_LINE_PA9 (uint32_t)(1U << 9U) /*!< PA9 */ +#define LL_EXTI_LINE_PA10 (uint32_t)(1U << 10U) /*!< PA10 */ +#define LL_EXTI_LINE_PA11 (uint32_t)(1U << 11U) /*!< PA11 */ +#define LL_EXTI_LINE_PA12 (uint32_t)(1U << 12U) /*!< PA12 */ +#define LL_EXTI_LINE_PA13 (uint32_t)(1U << 13U) /*!< PA13 */ +#define LL_EXTI_LINE_PA14 (uint32_t)(1U << 14U) /*!< PA14 */ +#define LL_EXTI_LINE_PA15 (uint32_t)(1U << 15U) /*!< PA15 */ +#define LL_EXTI_LINE_PB0 (uint32_t)(1U << 16U) /*!< PB0 */ +#define LL_EXTI_LINE_PB1 (uint32_t)(1U << 17U) /*!< PB1 */ +#define LL_EXTI_LINE_PB2 (uint32_t)(1U << 18U) /*!< PB2 */ +#define LL_EXTI_LINE_PB3 (uint32_t)(1U << 19U) /*!< PB3 */ +#define LL_EXTI_LINE_PB4 (uint32_t)(1U << 20U) /*!< PB4 */ +#define LL_EXTI_LINE_PB5 (uint32_t)(1U << 21U) /*!< PB5 */ +#define LL_EXTI_LINE_PB6 (uint32_t)(1U << 22U) /*!< PB6 */ +#define LL_EXTI_LINE_PB7 (uint32_t)(1U << 23U) /*!< PB7 */ +#define LL_EXTI_LINE_PB8 (uint32_t)(1U << 24U) /*!< PB8 */ +#define LL_EXTI_LINE_PB9 (uint32_t)(1U << 25U) /*!< PB9 */ +#define LL_EXTI_LINE_PB10 (uint32_t)(1U << 26U) /*!< PB10 */ +#define LL_EXTI_LINE_PB11 (uint32_t)(1U << 27U) /*!< PB11 */ +#define LL_EXTI_LINE_PB12 (uint32_t)(1U << 28U) /*!< PB12 */ +#define LL_EXTI_LINE_PB13 (uint32_t)(1U << 29U) /*!< PB13 */ +#define LL_EXTI_LINE_PB14 (uint32_t)(1U << 30U) /*!< PB14 */ +#define LL_EXTI_LINE_PB15 (uint32_t)(1U << 31U) /*!< PB15 */ +#define LL_EXTI_LINE_ALL (uint32_t)(0xFFFFFFFFU) /*!< All the EXTI lines PA0...PB15 */ + +#if defined(USE_FULL_LL_DRIVER) +#define LL_EXTI_LINE_NONE (0x00000000U) /*!< None Extended line */ +#endif /*USE_FULL_LL_DRIVER*/ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TYPE Type + * @{ + */ +#define LL_EXTI_TYPE_EDGE ((uint8_t)0x00U) /*!< Interrupt Type EDGE detection */ +#define LL_EXTI_TYPE_LEVEL ((uint8_t)0x01U) /*!< Interrupt Type LEVEL detection */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_TRIGGER Edge Trigger + * @{ + */ +#define LL_EXTI_TRIGGER_NONE ((uint8_t)0x00U) /*!< Trigger None */ +#define LL_EXTI_TRIGGER_RISING_EDGE ((uint8_t)0x01U) /*!< Trigger Rising Edge */ +#define LL_EXTI_TRIGGER_FALLING_EDGE ((uint8_t)0x02U) /*!< Trigger Falling Edge */ +#define LL_EXTI_TRIGGER_BOTH_EDGE ((uint8_t)0x03U) /*!< Trigger Both Edge */ +#define LL_EXTI_TRIGGER_LOW_LEVEL ((uint8_t)0x04U) /*!< Trigger Low Level */ +#define LL_EXTI_TRIGGER_HIGH_LEVEL ((uint8_t)0x05U) /*!< Trigger High Level */ +/** + * @} + */ + + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY + * @{ + */ +#define LL_FLASH_WAIT_STATES_0 0x00000000U /*!< FLASH Zero wait state */ +#define LL_FLASH_WAIT_STATES_1 FLASH_CONFIG_WAIT_STATES_0 /*!< FLASH One wait state when system clock frequency is 64 MHz */ +#define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero wait state */ +#define LL_FLASH_LATENCY_1 FLASH_CONFIG_WAIT_STATES_0 /*!< FLASH One wait state when system clock frequency is 64 MHz */ +/** + * @} + */ + +/** @defgroup SYSTEM_LL_DEVICE_INFORMATION Device Version Information + * @{ + */ +#if defined (MR_SUBG) +#define LL_SPIRIT3_CUT_10 0x10 +#endif +/** + * @} + */ + + +/** @defgroup SYSTEM_LL_IO_ANALOG_SWITCH IO GPIOB14 analog configuration + * @{ + */ +#define LL_SYSCFG_PB14_PVD 0x00000000U /*!< PVD external voltage feature is selected */ +#define LL_SYSCFG_PB14_ATB1 SYSCFG_GPIO_SWA_CTRL_ATB1_nPVD /*!< ATB1 feature is selected */ + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB0_STOP_IP DBGMCU APB0 _GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB0_GRP1_TIM2_STOP DBGMCU_DBG_APB0_FZ_DBG_TIM2_STOP /*!< The counter clock of TIM2 is stopped when the core is halted */ +#define LL_DBGMCU_APB0_GRP1_TIM16_STOP DBGMCU_DBG_APB0_FZ_DBG_TIM16_STOP /*!< The counter clock of TIM16 is stopped when the core is halted */ +#define LL_DBGMCU_APB0_GRP1_RTC_STOP DBGMCU_DBG_APB0_FZ_DBG_RTC_STOP /*!< The clock of the RTC counter is stopped when the core is halted */ +#define LL_DBGMCU_APB0_GRP1_IWDG_STOP DBGMCU_DBG_APB0_FZ_DBG_IWDG_STOP /*!< The independent watchdog counter clock is stopped when the core is halted */ + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EC_APB1_STOP_IP DBGMCU APB1 _GRP1 STOP IP + * @{ + */ +#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_DBG_APB1_FZ_DBG_I2C1_STOP /*!< The counter clock of I2C1 is stopped when the core is halted */ +#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_DBG_APB1_FZ_DBG_I2C2_STOP /*!< The counter clock of I2C2 is stopped when the core is halted */ + +/** + * @} + */ + +/** @defgroup SYSCFG_LL_RXTX_DET_TYPE Tx/Rx sequence information detection type + * @{ + */ +#define LL_SYSCFG_MR_SUBG_DET_TYPE_EDGE ((uint8_t)0x00U) /*!< Tx/Rx, COMP_OUT and RF_IP_BUSY_STATUS detection type EDGE */ +#define LL_SYSCFG_MR_SUBG_DET_TYPE_LEVEL ((uint8_t)0x01U) /*!< Tx/Rx, COMP_OUT and RF_IP_BUSY_STATUS detection type LEVEL */ +/** + * @} + */ + +/** @defgroup SYSCFG_LL_RXTX_EDGE_TRIGGER Tx/Rx detection trigger + * @{ + */ +#define LL_SYSCFG_MR_SUBG_TRIGGER_RISING_EDGE ((uint8_t)0x00U) /*!< Trigger on Rising Edge */ +#define LL_SYSCFG_MR_SUBG_TRIGGER_FALLING_EDGE ((uint8_t)0x01U) /*!< Trigger on Falling Edge */ +#define LL_SYSCFG_MR_SUBG_TRIGGER_BOTH_EDGE ((uint8_t)0x02U) /*!< Trigger on Both Edge */ +#define LL_SYSCFG_MR_SUBG_TRIGGER_LOW_LEVEL ((uint8_t)0x03U) /*!< Trigger on Low Level */ +#define LL_SYSCFG_MR_SUBG_TRIGGER_HIGH_LEVEL ((uint8_t)0x04U) /*!< Trigger on High Level */ +/** + * @} + */ + +/** @defgroup SYSCFG_LL_TX_RX_EVENT_ENABLE Tx/Rx event + * @{ + */ +#define LL_SYSCFG_MR_SUBG_TX_EVENT SYSCFG_INTAI_IER_TX_IE /*!< Tx Event Enable */ +#define LL_SYSCFG_MR_SUBG_RX_EVENT SYSCFG_INTAI_IER_RX_IE /*!< Rx Event Enable */ +#define LL_SYSCFG_MR_SUBG_COMPOUT_EVENT SYSCFG_INTAI_IER_COMP_IE /*!< COMP_OUT Event Enable */ +#define LL_SYSCFG_MR_SUBG_RFIP_BUSY_EVENT SYSCFG_INTAI_IER_RFIP_BUSY_STATUS_IE /*!< RFIP_BUSY_STATUS Event Enable */ +#define LL_SYSCFG_LCSC_LC_ACTIVITY_ISC SYSCFG_INTAI_ISCR_LC_ACTIVITY_ISC /*!< Edge status on LC_ACTIVITY signal Event Enable */ +#define LL_SYSCFG_LCSC_LC_ACTIVITY_ISEDGE SYSCFG_INTAI_ISCR_LC_ACTIVITY_ISEDGE /*!< Status on LC_ACTIVITY Event Enable */ +#define LL_SYSCFG_LCSC_LC_ACTIVITY_FALLING_EDGE (0U) /*!< Falling Edge LC_ACTIVITY Event */ +#define LL_SYSCFG_LCSC_LC_ACTIVITY_RISING_EDGE (1U) /*!< Rising Edge LC_ACTIVITY Event */ +#define LL_SYSCFG_LCSC_IBER_SINGLE (0U) /*!< Detection on single edge */ +#define LL_SYSCFG_LCSC_IBER_BOTH (SYSCFG_INTAI_IBER_LC_ACTIVITY_IBE) /*!< Detection on both edges */ +#define LL_SYSCFG_LCSC_IEVR_FALLING (0U) /*!< Detection on falling edge / low level */ +#define LL_SYSCFG_LCSC_IEVR_RISING (SYSCFG_INTAI_IEVR_LC_ACTIVITY_IEV) /*!< Detection on rising edge / high level */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SYSCFG_IO_LL_Exported_Macros SYSTEM Exported Macros + * @{ + */ + +/** @defgroup EXTI_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in SYSCFG register + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_SYSCFG_WriteReg(__REG__, __VALUE__) WRITE_REG(SYSCFG->__REG__, (__VALUE__)) + +/** + * @brief Read a value in SYSCFG register + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_SYSCFG_ReadReg(__REG__) READ_REG(SYSCFG->__REG__) +/** + * @} + */ + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions + * @{ + */ +/** @defgroup SYSCFG_LL_Exported_Functions SYSCFG Exported Functions + * @{ + */ + +/** + * @brief Get the device version and cut information. + * @rmtoll DIE_ID PRODUCT/VERSION/REVISION LL_SYSCFG_GetDeviceID + * @retval Device ID + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetDeviceID(void) +{ + return (uint32_t)READ_REG(SYSCFG->DIE_ID); +} + + +/** + * @brief Get the device cut revision (metal fix) information. + * @rmtoll DIE_ID REVISION LL_SYSCFG_GetDeviceRevision + * @retval Device ID + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetDeviceRevision(void) +{ + return (uint32_t)((READ_REG(SYSCFG->DIE_ID) & SYSCFG_DIE_ID_REVISION) >> SYSCFG_DIE_ID_REVISION_Pos); +} + +/** + * @brief Get the device cut version information. + * @rmtoll DIE_ID VERSION LL_SYSCFG_GetDeviceVersion + * @retval Device ID + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetDeviceVersion(void) +{ + return (uint32_t)((READ_REG(SYSCFG->DIE_ID) & SYSCFG_DIE_ID_VERSION) >> SYSCFG_DIE_ID_VERSION_Pos); +} + +/** + * @brief Get the JTAG_ID device information. + * @rmtoll JTAG_ID LL_SYSCFG_GetDeviceJTAG_ID + * @retval Device ID + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetDeviceJTAG_ID(void) +{ + return (uint32_t)READ_REG(SYSCFG->JTAG_ID); +} + +/** + * @brief Set memory mapping at address 0x00000000 + * @rmtoll CONFIG REMAP LL_SYSCFG_SetRemapMemory + * @param Memory This parameter can be one of the following values: + * @arg LL_SYSCFG_REMAP_FLASH + * @arg LL_SYSCFG_REMAP_SRAM + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_SetRemapMemory(uint32_t Memory) +{ + MODIFY_REG(FLASH->CONFIG, (FLASH_CONFIG_REMAP), Memory); +} + +/** + * @brief Get memory mapping at address 0x00000000 + * @rmtoll CONFIG REMAP LL_SYSCFG_GetRemapMemory + * @retval Returned value can be one of the following values: + * @arg LL_SYSCFG_REMAP_FLASH + * @arg LL_SYSCFG_REMAP_SRAM + */ +__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemory(void) +{ + uint32_t remap; + uint32_t memory_map = LL_SYSCFG_REMAP_FLASH; + + remap = READ_BIT(FLASH->CONFIG, FLASH_CONFIG_REMAP) >> FLASH_CONFIG_REMAP_Pos; + + if (remap == 1) + { + memory_map = LL_SYSCFG_REMAP_SRAM; + } + else + { + memory_map = LL_SYSCFG_REMAP_FLASH; + } + return memory_map; +} + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @rmtoll I2C_FMP_CTRL I2C1_PAx_FMP/I2C2_PBx_FMP LL_SYSCFG_EnableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA0 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA1 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PB10 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PB11 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA6 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA7 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA13 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA14 + * @retval None + * @note LL_SYSCFG_I2C_FASTMODEPLUS_PB10, LL_SYSCFG_I2C_FASTMODEPLUS_PB11, LL_SYSCFG_I2C_FASTMODEPLUS_PA6, + * LL_SYSCFG_I2C_FASTMODEPLUS_PA7, LL_SYSCFG_I2C_FASTMODEPLUS_PA13 and LL_SYSCFG_I2C_FASTMODEPLUS_PA14 + */ +__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + SET_BIT(SYSCFG->I2C_FMP_CTRL, ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @rmtoll I2C_FMP_CTRL I2C1_PAx_FMP/I2C2_PBx_FMP LL_SYSCFG_DisableFastModePlus + * @param ConfigFastModePlus This parameter can be a combination of the following values: + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA0 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA1 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PB6 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PB7 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PB10 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PB11 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA6 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA7 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA13 + * @arg LL_SYSCFG_I2C_FASTMODEPLUS_PA14 + * @retval None + * @note LL_SYSCFG_I2C_FASTMODEPLUS_PB10, LL_SYSCFG_I2C_FASTMODEPLUS_PB11, LL_SYSCFG_I2C_FASTMODEPLUS_PA6, + * LL_SYSCFG_I2C_FASTMODEPLUS_PA7, LL_SYSCFG_I2C_FASTMODEPLUS_PA13 and LL_SYSCFG_I2C_FASTMODEPLUS_PA14 + */ +__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + CLEAR_BIT(SYSCFG->I2C_FMP_CTRL, ConfigFastModePlus); +} + +/** + * @} + */ +/** @defgroup SYSCFG_IO_LL_Exported_Functions EXTI Exported Functions + * @{ + */ +/** @defgroup EXTI_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IO Interrupt for Lines in range PA0... PB15 + * @rmtoll IO_IER LL_EXTI_EnableIT + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableIT(uint32_t ExtiLine) +{ + SET_BIT(SYSCFG->IO_IER, ExtiLine); +} + +/** + * @brief Disable IO Interrupt for Lines in range PA0... PB15 + * @rmtoll IO_IER LL_EXTI_DisableIT + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableIT(uint32_t ExtiLine) +{ + CLEAR_BIT(SYSCFG->IO_IER, ExtiLine); +} + +/** + * @brief Indicate if IO Interrupt Mask is enabled + * @rmtoll IO_IER LL_EXTI_IsEnabledIT + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledIT(uint32_t ExtiLine) +{ + return ((READ_BIT(SYSCFG->IO_IER, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ +/** @defgroup EXTI_LL_EF_TYPE_Management Level Edge Management + * @{ + */ + +/** + * @brief Set IO Interrupt Type for Lines in range PA0... PB15 + * @rmtoll IO_DTR LL_EXTI_EnableEdgeDetection + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @retval None + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + */ +__STATIC_INLINE void LL_EXTI_EnableEdgeDetection(uint32_t ExtiLine) +{ + CLEAR_BIT(SYSCFG->IO_DTR, ExtiLine); +} + +/** + * @brief Set IO Interrupt Type for Lines in range PA0... PB15 + * @rmtoll IO_DTR LL_EXTI_DisableEdgeDetection + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @retval None + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + */ +__STATIC_INLINE void LL_EXTI_DisableEdgeDetection(uint32_t ExtiLine) +{ + SET_BIT(SYSCFG->IO_DTR, ExtiLine); +} + +/** + * @brief Get IO Interrupt Type for Lines in range PA0... PB15 + * @rmtoll IO_DTR LL_EXTI_IsEnabledEdgeDetection + * @param ExtiLine This parameter can be one of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL +al One of the following values: + * @arg @ref LL_EXTI_TYPE_EDGE + * @arg @ref LL_EXTI_TYPE_LEVEL + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledEdgeDetection(uint32_t ExtiLine) +{ + return ((READ_BIT(SYSCFG->IO_DTR, ExtiLine) == (ExtiLine)) ? 0UL : 1UL); +} +/** + * @} + */ + +/** @defgroup EXTI_LL_EF_Trigger_EDGE_Management Trigger Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range PA0... PB15 + * @rmtoll IO_IBER LL_EXTI_EnableBothEdgeTrig + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableBothEdgeTrig(uint32_t ExtiLine) +{ + SET_BIT(SYSCFG->IO_IBER, ExtiLine); +} +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range PA0... PB15 + * @rmtoll IBER LL_EXTI_DisableBothEdgeTrig + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + * @retval None + */ + +__STATIC_INLINE void LL_EXTI_DisableBothEdgeTrig(uint32_t ExtiLine) +{ + CLEAR_BIT(SYSCFG->IO_IBER, ExtiLine); +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range PA0... PB15 + * @rmtoll IBER LL_EXTI_IsEnabledBothEdgeTrig + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + * @retval State of bit (1 or 0). + */ + +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledBothEdgeTrig(uint32_t ExtiLine) +{ + return ((READ_BIT(SYSCFG->IO_IBER, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ + + +/** @defgroup EXTI_LL_EF_RISING/Falling_Trigger_Management RISING Falling Trigger Management + * @{ + */ + +/** + * @brief Enable ExtiLine Rising Edge Trigger for Lines in range PA0... PB15 + * @rmtoll IO_IEVR LL_EXTI_EnableRisingTrig + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + * @note Please check each device line mapping for EXTI Line availability + * @retval None + */ +__STATIC_INLINE void LL_EXTI_EnableRisingTrig(uint32_t ExtiLine) +{ + SET_BIT(SYSCFG->IO_IEVR, ExtiLine); +} + +/** + * @brief Disable ExtiLine Rising Edge Trigger for Lines in range PA0... PB15 + * @rmtoll IO_IEVR LL_EXTI_DisableRisingTrig + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + * @retval None + */ +__STATIC_INLINE void LL_EXTI_DisableRisingTrig(uint32_t ExtiLine) +{ + CLEAR_BIT(SYSCFG->IO_IEVR, ExtiLine); +} + +/** + * @brief Check if rising edge trigger is enabled for Lines in range PA0... PB15 + * @rmtoll IO_IEVR LL_EXTI_IsEnabledRisingTrig + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + * @note Please check each device line mapping for EXTI Line availability + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsEnabledRisingTrig(uint32_t ExtiLine) +{ + return ((READ_BIT(SYSCFG->IO_IEVR, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @} + */ +/** @defgroup EXTI_LL_EF_Flag_Management Flag_Management + * @{ + */ + +/** + * @brief Check if the ExtLine Flag is set or not for Lines in range PA0...PB15 + * @rmtoll IO_ISCR LL_EXTI_IsActiveFlag + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_EXTI_IsActiveFlag(uint32_t ExtiLine) +{ + return ((READ_BIT(SYSCFG->IO_ISCR, ExtiLine) == (ExtiLine)) ? 1UL : 0UL); +} + +/** + * @brief Read ExtLine Combination Flag for Lines in range PA0...PB15 + * @rmtoll IO_ISCR LL_EXTI_ReadFlag + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @retval None + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + */ +__STATIC_INLINE uint32_t LL_EXTI_ReadFlag(uint32_t ExtiLine) +{ + return (uint32_t)(READ_BIT(SYSCFG->IO_ISCR, ExtiLine)); +} + +/** + * @brief Clear ExtLine Flags for Lines in range PA0...PB15 + * @rmtoll IO_ISCR LL_EXTI_ClearFlag + * @param ExtiLine This parameter can be a combination of the following values: + * @arg @ref LL_EXTI_LINE_PA0 + * @arg @ref LL_EXTI_LINE_PA1 + * @arg @ref LL_EXTI_LINE_PA2 + * @arg @ref LL_EXTI_LINE_PA3 + * @arg @ref LL_EXTI_LINE_PA4 + * @arg @ref LL_EXTI_LINE_PA5 + * @arg @ref LL_EXTI_LINE_PA6 + * @arg @ref LL_EXTI_LINE_PA7 + * @arg @ref LL_EXTI_LINE_PA8 + * @arg @ref LL_EXTI_LINE_PA9 + * @arg @ref LL_EXTI_LINE_PA10 + * @arg @ref LL_EXTI_LINE_PA11 + * @arg @ref LL_EXTI_LINE_PA12 + * @arg @ref LL_EXTI_LINE_PA13 + * @arg @ref LL_EXTI_LINE_PA14 + * @arg @ref LL_EXTI_LINE_PA15 + * @arg @ref LL_EXTI_LINE_PB0 + * @arg @ref LL_EXTI_LINE_PB1 + * @arg @ref LL_EXTI_LINE_PB2 + * @arg @ref LL_EXTI_LINE_PB3 + * @arg @ref LL_EXTI_LINE_PB4 + * @arg @ref LL_EXTI_LINE_PB5 + * @arg @ref LL_EXTI_LINE_PB6 + * @arg @ref LL_EXTI_LINE_PB7 + * @arg @ref LL_EXTI_LINE_PB8 + * @arg @ref LL_EXTI_LINE_PB9 + * @arg @ref LL_EXTI_LINE_PB10 + * @arg @ref LL_EXTI_LINE_PB11 + * @arg @ref LL_EXTI_LINE_PB12 + * @arg @ref LL_EXTI_LINE_PB13 + * @arg @ref LL_EXTI_LINE_PB14 + * @arg @ref LL_EXTI_LINE_PB15 + * @arg @ref LL_EXTI_LINE_ALL + * @retval None + * @note PA0-PA15 and PB0-PB15 are valid for STM32WL33 + */ +__STATIC_INLINE void LL_EXTI_ClearFlag(uint32_t ExtiLine) +{ + WRITE_REG(SYSCFG->IO_ISCR, ExtiLine); +} + +/** + * @} + */ +/** @defgroup SYSTEM_LL_PWRC SYSCFG + * @{ + */ + +/** + * @brief Enable PWRC Interrupt Mask + * @rmtoll PWRC_IER LL_SYSCFG_PWRC_EnableIT + * @param Interrupt This parameter can be a combination of the following values: + * @arg LL_SYSCFG_PWRC_PVD + * @arg LL_SYSCFG_PWRC_WKUP + * @arg LL_SYSCFG_PWRC_BORH + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_PWRC_EnableIT(uint32_t Interrupt) +{ + SET_BIT(SYSCFG->PWRC_IER, Interrupt); +} + +/** + * @brief Disable PWRC Interrupt Mask + * @rmtoll PWRC_IER LL_SYSCFG_PWRC_DisableIT + * @param Interrupt This parameter can be a combination of the following values: + * @arg LL_SYSCFG_PWRC_PVD + * @arg LL_SYSCFG_PWRC_WKUP + * @arg LL_SYSCFG_PWRC_BORH + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_PWRC_DisableIT(uint32_t Interrupt) +{ + CLEAR_BIT(SYSCFG->PWRC_IER, Interrupt); +} + +/** + * @brief Indicate if PWRC Interrupt Mask is enabled + * @rmtoll PWRC_IER LL_SYSCFG_PWRC_IsEnabledIT + * @param Interrupt This parameter can be a combination of the following values: + * @arg LL_SYSCFG_PWRC_PVD + * @arg LL_SYSCFG_PWRC_WKUP + * @arg LL_SYSCFG_PWRC_BORH + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_PWRC_IsEnabledIT(uint32_t Interrupt) +{ + return ((READ_BIT(SYSCFG->PWRC_IER, Interrupt) == (Interrupt)) ? 1UL : 0UL); +} + +/** + * @brief Get PWRC Interrupt Status + * @rmtoll PWRC_ISCR LL_SYSCFG_PWRC_GetStatusIT + * @param Interrupt This parameter can be a combination of the following values: + * @arg LL_SYSCFG_PWRC_PVD + * @arg LL_SYSCFG_PWRC_WKUP + * @arg LL_SYSCFG_PWRC_BORH + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_PWRC_GetStatusIT(uint32_t Interrupt) +{ + return ((READ_BIT(SYSCFG->PWRC_ISCR, Interrupt) == (Interrupt)) ? 1UL : 0UL); +} + +/** + * @brief Clear PWRC Interrupt Status + * @rmtoll PWRC_ISCR LL_SYSCFG_PWRC_ClearIT + * @param Interrupt This parameter can be a combination of the following values: + * @arg LL_SYSCFG_PWRC_PVD + * @arg LL_SYSCFG_PWRC_WKUP + * @arg LL_SYSCFG_PWRC_BORH + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_PWRC_ClearIT(uint32_t Interrupt) +{ + SET_BIT(SYSCFG->PWRC_ISCR, Interrupt); +} + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_EF_FLASH FLASH + * @{ + */ + +/** + * @brief Set FLASH wait_states + * @rmtoll FLASH_CONFIG Latency LL_FLASH_SetLatency + * @param Latency This parameter can be one of the following values: + * @arg LL_FLASH_LATENCY_0 + * @arg LL_FLASH_LATENCY_1 + * @retval None + */ +__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) +{ + MODIFY_REG(FLASH->CONFIG, FLASH_CONFIG_WAIT_STATES, Latency); +} + +/** + * @brief Get FLASH Latency + * @rmtoll FLASH_CONFIG WAIT_STATE LL_FLASH_GetLatency + * @retval Returned value can be one of the following values: + * @arg LL_FLASH_LATENCY_0 + * @arg LL_FLASH_LATENCY_1 + */ +__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) +{ + return (uint32_t)(READ_BIT(FLASH->CONFIG, FLASH_CONFIG_WAIT_STATES)); +} +/** + * @} + */ + +/** @defgroup SYSCFG_LL_RADIO_EVENT_TYPE_Management Level/Edge Management + * @{ + */ + +/** + * @brief Enable Internal asynchronous Interrupt + * @rmtoll INTAI_IER LL_SYSCFG_MR_SUBG_INTAI_EnableIT + * @param Signal This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_COMPOUT_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RFIP_BUSY_EVENT + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_MR_SUBG_INTAI_EnableIT(uint32_t Signal) +{ + SET_BIT(SYSCFG->INTAI_IER, Signal); +} + +/** + * @brief Disable Internal asynchronous Interrupt + * @rmtoll INTAI_IER LL_SYSCFG_MR_SUBG_INTAI_DisableIT + * @param Signal This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_COMPOUT_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RFIP_BUSY_EVENT + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_MR_SUBG_INTAI_DisableIT(uint32_t Signal) +{ + CLEAR_BIT(SYSCFG->INTAI_IER, Signal); +} + +/** + * @brief Indicate if Internal asynchronous Interrupt is enabled + * @rmtoll INTAI_IER LL_SYSCFG_MR_SUBG_INTAI_IsEnabledIT + * @param Signal This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_COMPOUT_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RFIP_BUSY_EVENT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_MR_SUBG_INTAI_IsEnabledIT(uint32_t Signal) +{ + return ((READ_BIT(SYSCFG->INTAI_IER, Signal) == (Signal)) ? 1UL : 0UL); +} + + +/** + * @brief Set Internal asynchronous Interrupt Detection Type + * @rmtoll INTAI_DTR LL_SYSCFG_MR_SUBG_INTAI_SetType + * @param Type This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_DET_TYPE_EDGE + * @arg @ref LL_SYSCFG_MR_SUBG_DET_TYPE_LEVEL + * @param Signal This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_COMPOUT_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RFIP_BUSY_EVENT + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_MR_SUBG_INTAI_SetType(uint8_t Type, uint32_t Signal) +{ + if (Type == LL_SYSCFG_MR_SUBG_DET_TYPE_EDGE) + { + CLEAR_BIT(SYSCFG->INTAI_DTR, Signal); + } + else + { + SET_BIT(SYSCFG->INTAI_DTR, Signal); + } +} + +/** + * @brief Get Internal asynchronous Interrupt Detection Type + * @rmtoll INTAI_DTR LL_SYSCFG_MR_SUBG_INTAI_GetType + * @param Signal This parameter one of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_COMPOUT_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RFIP_BUSY_EVENT + * @retval One of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_DET_TYPE_EDGE + * @arg @ref LL_SYSCFG_MR_SUBG_DET_TYPE_LEVEL + */ +__STATIC_INLINE uint32_t LL_SYSCFG_MR_SUBG_INTAI_GetType(uint32_t Signal) +{ + if (READ_BIT(SYSCFG->INTAI_DTR, Signal)) + { + return LL_SYSCFG_MR_SUBG_DET_TYPE_LEVEL; + } + + return LL_SYSCFG_MR_SUBG_DET_TYPE_EDGE; +} + +/** + * @} + */ + +/** @defgroup SYSCFG_LL_EF_Trigger_Management Trigger_Management + * @{ + */ + +/** + * @brief Set Internal asynchronous Interrupt Trigger + * @rmtoll INTAI_IBER/INTAI_IEVR/INTAI_DTR LL_SYSCFG_MR_SUBG_INTAI_SetTrigger + * @param Trigger This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TRIGGER_RISING_EDGE + * @arg @ref LL_SYSCFG_MR_SUBG_TRIGGER_FALLING_EDGE + * @arg @ref LL_SYSCFG_MR_SUBG_TRIGGER_BOTH_EDGE + * @arg @ref LL_SYSCFG_MR_SUBG_TRIGGER_LOW_LEVEL + * @arg @ref LL_SYSCFG_MR_SUBG_TRIGGER_HIGH_LEVEL + * @param Signal This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_COMPOUT_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RFIP_BUSY_EVENT + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_MR_SUBG_INTAI_SetTrigger(uint8_t Trigger, uint32_t Signal) +{ + switch (Trigger) + { + case LL_SYSCFG_MR_SUBG_TRIGGER_BOTH_EDGE: + { + SET_BIT(SYSCFG->INTAI_IBER, Signal); + CLEAR_BIT(SYSCFG->INTAI_IEVR, Signal); + break; + } + case LL_SYSCFG_MR_SUBG_TRIGGER_RISING_EDGE: + { + CLEAR_BIT(SYSCFG->INTAI_IBER, Signal); + SET_BIT(SYSCFG->INTAI_IEVR, Signal); + break; + } + case LL_SYSCFG_MR_SUBG_TRIGGER_FALLING_EDGE: + { + CLEAR_BIT(SYSCFG->INTAI_IBER, Signal); + CLEAR_BIT(SYSCFG->INTAI_IEVR, Signal); + break; + } + case LL_SYSCFG_MR_SUBG_TRIGGER_LOW_LEVEL: + { + CLEAR_BIT(SYSCFG->INTAI_IBER, Signal); + CLEAR_BIT(SYSCFG->INTAI_IEVR, Signal); + break; + } + case LL_SYSCFG_MR_SUBG_TRIGGER_HIGH_LEVEL: + { + CLEAR_BIT(SYSCFG->INTAI_IBER, Signal); + SET_BIT(SYSCFG->INTAI_IEVR, Signal); + break; + } + } +} + +/** + * @brief Get Internal asynchronous Interrupt Trigger + * @rmtoll INTAI_IBER/INTAI_IEVR/INTAI_DTR LL_SYSCFG_MR_SUBG_INTAI_GetTrigger + * @param Signal This parameter can be one of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_COMPOUT_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RFIP_BUSY_EVENT + * @retval The return value can be one of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TRIGGER_RISING_EDGE + * @arg @ref LL_SYSCFG_MR_SUBG_TRIGGER_FALLING_EDGE + * @arg @ref LL_SYSCFG_MR_SUBG_TRIGGER_BOTH_EDGE + * @arg @ref LL_SYSCFG_MR_SUBG_TRIGGER_LOW_LEVEL + * @arg @ref LL_SYSCFG_MR_SUBG_TRIGGER_HIGH_LEVEL + */ +__STATIC_INLINE uint8_t LL_SYSCFG_MR_SUBG_INTAI_GetTrigger(uint32_t Signal) +{ + uint32_t level_setup, level_edge, both_edge; + + level_setup = READ_BIT(SYSCFG->INTAI_DTR, Signal); + level_edge = READ_BIT(SYSCFG->INTAI_IEVR, Signal); + both_edge = READ_BIT(SYSCFG->INTAI_IBER, Signal); + + if (level_setup) + { + if (level_edge) + { + return LL_SYSCFG_MR_SUBG_TRIGGER_HIGH_LEVEL; + } + else + { + return LL_SYSCFG_MR_SUBG_TRIGGER_LOW_LEVEL; + } + } + else + { + if (both_edge) + { + return LL_SYSCFG_MR_SUBG_TRIGGER_BOTH_EDGE; + } + if (level_edge) + { + return LL_SYSCFG_MR_SUBG_TRIGGER_RISING_EDGE; + } + } + return LL_SYSCFG_MR_SUBG_TRIGGER_FALLING_EDGE; +} + + +/** + * @brief Check if the Internal asynchronous Interrupt is set or not + * @note This bit is cleared by writing a 1 to the bit. + * @rmtoll INTAI_ISCR LL_SYSCFG_MR_SUBG_INTAI_IsInterruptPending + * @param Signal This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_COMPOUT_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RFIP_BUSY_EVENT + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_MR_SUBG_INTAI_IsInterruptPending(uint32_t Signal) +{ + return ((READ_BIT(SYSCFG->INTAI_ISCR, Signal) == (Signal)) ? 1UL : 0UL); +} + + +/** + * @brief Clear the Internal asynchronous Interrupt + * @rmtoll INTAI_ISCR LL_SYSCFG_MR_SUBG_INTAI_ClearInterrupt + * @param Signal This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_MR_SUBG_TX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RX_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_COMPOUT_EVENT + * @arg @ref LL_SYSCFG_MR_SUBG_RFIP_BUSY_EVENT + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_MR_SUBG_INTAI_ClearInterrupt(uint32_t Signal) +{ + WRITE_REG(SYSCFG->INTAI_ISCR, Signal); +} + +/** + * @brief Set interrupt edge register on LC_ACTIVITY signal detection on single or both edges. + * @rmtoll INTAI_IBER LL_SYSCFG_LCSC_INTAI_IBER_Edge_Detection + * @param Value This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_LCSC_IBER_SINGLE + * @arg @ref LL_SYSCFG_LCSC_IBER_BOTH + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_LCSC_INTAI_IBER_Edge_Detection(uint32_t Value) +{ + MODIFY_REG(SYSCFG->INTAI_IBER, SYSCFG_INTAI_IBER_LC_ACTIVITY_IBE, Value); +} + + + +/** + * @brief Check if the Internal asynchronous Interrupt is set or not + * @note This bit is cleared by writing a 1 to the bit. + * @rmtoll INTAI_ISCR LL_SYSCFG_LCSC_INTAI_IsInterruptPending + * @param Value This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_LCSC_LC_ACTIVITY_ISC + * @arg @ref LL_SYSCFG_LCSC_LC_ACTIVITY_ISEDGE + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_LCSC_INTAI_IsInterruptPending(uint32_t Value) +{ + return ((READ_BIT(SYSCFG->INTAI_ISCR, Value) == (Value)) ? 1UL : 0UL); +} + + +/** + * @brief Clear the Internal asynchronous Interrupt + * @rmtoll INTAI_ISCR LL_SYSCFG_LCSC_INTAI_ClearInterrupt + * @param Signal This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_LCSC_LC_ACTIVITY_ISC + * @arg @ref LL_SYSCFG_LCSC_LC_ACTIVITY_ISEDGE + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_LCSC_INTAI_ClearInterrupt(uint32_t Signal) +{ + WRITE_REG(SYSCFG->INTAI_ISCR, Signal); +} + +/** + * @} + */ + +/** @defgroup SYSTEM_LL_ANALOG_SWITCH Analog source selection to connect on analog pads + * @{ + */ +/** + * @brief Setup analog feature on PB14 between ATB1 and PVD when the PB14 I/O + * is programmed in analog mode + * @rmtoll GPIO_SWA_CTRL ATB1_nPVD LL_IO_AnalogSwitchControl_PB14 + * @param feature this parameter can be one of the following values: + * @arg LL_SYSCFG_PB14_PVD + * @arg LL_SYSCFG_PB14_ATB1 + * @retval None + */ +__STATIC_INLINE void LL_IO_SetAnalogSwitchControl_PB14(uint32_t feature) +{ + MODIFY_REG(SYSCFG->GPIO_SWA_CTRL, SYSCFG_GPIO_SWA_CTRL_ATB1_nPVD, feature); +} + +/** + * @brief Setup analog feature on PB14 between ATB1 and PVD when the PB14 I/O + * is programmed in analog mode + * @rmtoll GPIO_SWA_CTRL ATB1_nPVD LL_IO_AnalogSwitchControl_PB14 + * @retval The return value can be one of the following values: + * @arg LL_SYSCFG_PB14_PVD + * @arg LL_SYSCFG_PB14_ATB1 + */ +__STATIC_INLINE uint32_t LL_IO_GetAnalogSwitchControl_PB14(void) +{ + return (uint32_t)(READ_BIT(SYSCFG->GPIO_SWA_CTRL, SYSCFG_GPIO_SWA_CTRL_ATB1_nPVD)); +} + +/** + * @brief Set the interrupt polarity event on LC_ACTIVITY signal detection on falling edge / low level or on rising edge / high level + * @rmtoll INTAI_IEVR LL_SYSCFG_LCSC_INTAI_IEVR_Polarity + * @param Value This parameter can be a combination of the following values: + * @arg @ref LL_SYSCFG_LCSC_IEVR_FALLING + * @arg @ref LL_SYSCFG_LCSC_IEVR_RISING + * @retval None + */ +__STATIC_INLINE void LL_SYSCFG_LCSC_INTAI_IEVR_Polarity(uint32_t Value) +{ + MODIFY_REG(SYSCFG->INTAI_IEVR, SYSCFG_INTAI_IEVR_LC_ACTIVITY_IEV, Value); +} + +/** + * @brief Check if MR_SUBG is busy + * @rmtoll SYSCFG_SR1 RFIP_BUSY_STATUS LL_SYSCFG_IsMR_SUBGBusy + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_SYSCFG_IsMR_SUBGBusy(void) +{ + return ((READ_BIT(SYSCFG->SR1, SYSCFG_SR1_RFIP_BUSY_STATUS) == (SYSCFG_SR1_RFIP_BUSY_STATUS)) ? 1UL : 0UL); +} + +/** + * @brief Enable the Debug Module during STOP mode + * @rmtoll DBG_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @rmtoll DBG_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during SLEEP mode + * @rmtoll DBG_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode + * @rmtoll DBG_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Freeze APB0 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB0FZR DBG_xxxx_STOP LL_DBGMCU_APB0_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB0_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB0_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB0_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB0_GRP1_IWDG_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB0_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->DBG_APB0_FZ, Periphs); +} + +/** + * @brief Freeze APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1FZR DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) +{ + SET_BIT(DBGMCU->DBG_APB1_FZ, Periphs); +} + +/** + * @brief Unfreeze APB0 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1FZR DBG_xxxx_STOP LL_DBGMCU_APB0_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB0_GRP1_TIM2_STOP + * @arg @ref LL_DBGMCU_APB0_GRP1_TIM16_STOP + * @arg @ref LL_DBGMCU_APB0_GRP1_RTC_STOP + * @arg @ref LL_DBGMCU_APB0_GRP1_IWDG_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB0_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->DBG_APB0_FZ, Periphs); +} + +/** + * @brief Unfreeze CPU1 APB1 peripherals (group1 peripherals) + * @rmtoll DBGMCU_APB1FZR DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph + * @param Periphs This parameter can be a combination of the following values: + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP + * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP + * @retval None + */ +__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) +{ + CLEAR_BIT(DBGMCU->DBG_APB1_FZ, Periphs); +} +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup SYSCFG_IO_LL_EF_Init Initialization and de-initialization functions + * @{ + */ + +ErrorStatus LL_SYSCFG_IO_Init(LL_SYSCFG_IO_InitTypeDef *SYSCFG_IO_InitStruct); +ErrorStatus LL_SYSCFG_IO_DeInit(void); +void LL_SYSCFG_IO_StructInit(LL_SYSCFG_IO_InitTypeDef *SYSCFG_IO_InitStruct); + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (FLASH) || defined (SYSCFG) */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_SYSTEM_H */ \ No newline at end of file diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_tim.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_tim.h new file mode 100644 index 0000000000..5f1fd20974 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_tim.h @@ -0,0 +1,4180 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_tim.h + * @author MCD Application Team + * @brief Header file of TIM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32WL3x_LL_TIM_H +#define __STM32WL3x_LL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (TIM2) || defined (TIM16) + +/** @defgroup TIM_LL TIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Variables TIM Private Variables + * @{ + */ +static const uint8_t OFFSET_TAB_CCMRx[] = +{ + 0x00U, /* 0: TIMx_CH1 */ + 0x00U, /* 1: TIMx_CH1N */ + 0x00U, /* 2: TIMx_CH2 */ + 0x00U, /* 3: TIMx_CH2N */ + 0x04U, /* 4: TIMx_CH3 */ + 0x04U, /* 5: TIMx_CH3N */ + 0x04U /* 6: TIMx_CH4 */ +}; + +static const uint8_t SHIFT_TAB_OCxx[] = +{ + 0U, /* 0: OC1M, OC1FE, OC1PE */ + 0U, /* 1: - NA */ + 8U, /* 2: OC2M, OC2FE, OC2PE */ + 0U, /* 3: - NA */ + 0U, /* 4: OC3M, OC3FE, OC3PE */ + 0U, /* 5: - NA */ + 8U /* 6: OC4M, OC4FE, OC4PE */ +}; + +static const uint8_t SHIFT_TAB_ICxx[] = +{ + 0U, /* 0: CC1S, IC1PSC, IC1F */ + 0U, /* 1: - NA */ + 8U, /* 2: CC2S, IC2PSC, IC2F */ + 0U, /* 3: - NA */ + 0U, /* 4: CC3S, IC3PSC, IC3F */ + 0U, /* 5: - NA */ + 8U /* 6: CC4S, IC4PSC, IC4F */ +}; + +static const uint8_t SHIFT_TAB_CCxP[] = +{ + 0U, /* 0: CC1P */ + 2U, /* 1: CC1NP */ + 4U, /* 2: CC2P */ + 6U, /* 3: CC2NP */ + 8U, /* 4: CC3P */ + 10U, /* 5: CC3NP */ + 12U /* 6: CC4P */ +}; + +static const uint8_t SHIFT_TAB_OISx[] = +{ + 0U, /* 0: OIS1 */ + 1U, /* 1: OIS1N */ + 2U, /* 2: OIS2 */ + 3U, /* 3: OIS2N */ + 4U, /* 4: OIS3 */ + 5U, /* 5: OIS3N */ + 6U /* 6: OIS4 */ +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Constants TIM Private Constants + * @{ + */ + +/* Defines used for the bit position in the register and perform offsets */ +#define TIM_POSITION_BRK_SOURCE ((Source >> 1U) & 0x1FUL) + +/* Generic bit definitions for TIMx_AF1 register */ +#define TIMx_AF1_BKINP TIM_AF1_BKINP /*!< BRK BKIN input polarity */ +#define TIMx_AF1_ETRSEL TIM_AF1_ETRSEL /*!< TIMx ETR source selection */ + +/* Remap mask definitions */ +#define TIMx_OR_RMP_SHIFT 16U +#define TIMx_OR_RMP_MASK 0x0000FFFFU +#define TIM2_OR_RMP_MASK ((TIM2_OR_TI4_RMP | TIM2_OR_ETR_RMP) << TIMx_OR_RMP_SHIFT) +#define TIM16_OR_RMP_MASK (TIM16_OR_TI1_RMP << TIMx_OR_RMP_SHIFT) + +/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ +#define DT_DELAY_1 ((uint8_t)0x7F) +#define DT_DELAY_2 ((uint8_t)0x3F) +#define DT_DELAY_3 ((uint8_t)0x1F) +#define DT_DELAY_4 ((uint8_t)0x1F) + +/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ +#define DT_RANGE_1 ((uint8_t)0x00) +#define DT_RANGE_2 ((uint8_t)0x80) +#define DT_RANGE_3 ((uint8_t)0xC0) +#define DT_RANGE_4 ((uint8_t)0xE0) + +/** Legacy definitions for compatibility purpose +@cond 0 + */ +/** +@endcond + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Macros TIM Private Macros + * @{ + */ +/** @brief Convert channel id into channel index. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval none + */ +#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ + (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U : 6U) + +/** @brief Calculate the deadtime sampling period(in ps). + * @param __TIMCLK__ timer input clock frequency (in Hz). + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval none + */ +#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ + (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ + ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ + ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure + * @{ + */ + +/** + * @brief TIM Time Base configuration structure definition. + */ +typedef struct +{ + uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetPrescaler().*/ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetCounterMode().*/ + + uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + Some timer instances may support 32 bits counters. In that case this parameter must + be a number between 0x0000 and 0xFFFFFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetAutoReload().*/ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetClockDivision().*/ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetRepetitionCounter().*/ +} LL_TIM_InitTypeDef; + +/** + * @brief TIM Output Compare configuration structure definition. + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the output mode. + This parameter can be a value of @ref TIM_LL_EC_OCMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetMode().*/ + + uint32_t OCState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + LL_TIM_OC_SetCompareCHx (x=1..6).*/ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ +} LL_TIM_OC_InitTypeDef; + +/** + * @brief TIM Input Capture configuration structure definition. + */ + +typedef struct +{ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t ICActiveInput; /*!< Specifies the input. + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ +} LL_TIM_IC_InitTypeDef; + + +/** + * @brief TIM Encoder interface configuration structure definition. + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). + This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetEncoderMode().*/ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC2Filter; /*!< Specifies the TI2 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + +} LL_TIM_ENCODER_InitTypeDef; + + +/** + * @brief BDTR (Break and Dead Time) structure definition + */ +typedef struct +{ + uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref TIM_LL_EC_OSSR + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref TIM_LL_EC_OSSI + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t LockLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL + + @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR + register has been written, their content is frozen until the next reset.*/ + + uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetDeadTime() + + @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been + programmed. */ + + uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input. + This parameter can be a value of @ref TIM_LL_EC_BREAK_AFMODE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_ConfigBRK() + + @note Bidirectional break input is only supported by advanced timers instances. + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ +} LL_TIM_BDTR_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_TIM_ReadReg function. + * @{ + */ +#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ +#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ +#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ +#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ +#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ +#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ +#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ +#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ +#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ +#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ +#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ +#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable + * @{ + */ +#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ +#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable + * @{ + */ +#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup TIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. + * @{ + */ +#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ +#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ +#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ +#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ +#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ +#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ +#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ +#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source + * @{ + */ +#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ +#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode + * @{ + */ +#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode + * @{ + */ +#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as upcounter */ +#define LL_TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as downcounter */ +#define LL_TIM_COUNTERMODE_CENTER_DOWN TIM_CR1_CMS_0 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting down. */ +#define LL_TIM_COUNTERMODE_CENTER_UP TIM_CR1_CMS_1 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up */ +#define LL_TIM_COUNTERMODE_CENTER_UP_DOWN TIM_CR1_CMS /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up or down. */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CLOCKDIVISION Clock Division + * @{ + */ +#define LL_TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< tDTS=tCK_INT */ +#define LL_TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< tDTS=2*tCK_INT */ +#define LL_TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERDIRECTION Counter Direction + * @{ + */ +#define LL_TIM_COUNTERDIRECTION_UP 0x00000000U /*!< Timer counter counts up */ +#define LL_TIM_COUNTERDIRECTION_DOWN TIM_CR1_DIR /*!< Timer counter counts down */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CCUPDATESOURCE Capture Compare Update Source + * @{ + */ +#define LL_TIM_CCUPDATESOURCE_COMG_ONLY 0x00000000U /*!< Capture/compare control bits are updated by setting the COMG bit only */ +#define LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI TIM_CR2_CCUS /*!< Capture/compare control bits are updated by setting the COMG bit or when a rising edge occurs on trigger input (TRGI) */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CCDMAREQUEST Capture Compare DMA Request + * @{ + */ +#define LL_TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when CCx event occurs */ +#define LL_TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_LOCKLEVEL Lock Level + * @{ + */ +#define LL_TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF - No bit is write protected */ +#define LL_TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define LL_TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define LL_TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CHANNEL Channel + * @{ + */ +#define LL_TIM_CHANNEL_CH1 TIM_CCER_CC1E /*!< Timer input/output channel 1 */ +#define LL_TIM_CHANNEL_CH1N TIM_CCER_CC1NE /*!< Timer complementary output channel 1 */ +#define LL_TIM_CHANNEL_CH2 TIM_CCER_CC2E /*!< Timer input/output channel 2 */ +#define LL_TIM_CHANNEL_CH2N TIM_CCER_CC2NE /*!< Timer complementary output channel 2 */ +#define LL_TIM_CHANNEL_CH3 TIM_CCER_CC3E /*!< Timer input/output channel 3 */ +#define LL_TIM_CHANNEL_CH3N TIM_CCER_CC3NE /*!< Timer complementary output channel 3 */ +#define LL_TIM_CHANNEL_CH4 TIM_CCER_CC4E /*!< Timer input/output channel 4 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_OCSTATE Output Configuration State + * @{ + */ +#define LL_TIM_OCSTATE_DISABLE 0x00000000U /*!< OCx is not active */ +#define LL_TIM_OCSTATE_ENABLE TIM_CCER_CC1E /*!< OCx signal is output on the corresponding output pin */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** Legacy definitions for compatibility purpose +@cond 0 + */ +#define LL_TIM_OCMODE_ASSYMETRIC_PWM1 LL_TIM_OCMODE_ASYMMETRIC_PWM1 +#define LL_TIM_OCMODE_ASSYMETRIC_PWM2 LL_TIM_OCMODE_ASYMMETRIC_PWM2 +/** +@endcond + */ + +/** @defgroup TIM_LL_EC_OCMODE Output Configuration Mode + * @{ + */ +#define LL_TIM_OCMODE_FROZEN 0x00000000U /*!TIMx_CCRy else active.*/ +#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!TIMx_CCRy else inactive*/ +#define LL_TIM_OCMODE_RETRIG_OPM1 TIM_CCMR1_OC1M_3 /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in TIM register. + * @param __INSTANCE__ TIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** + * @brief HELPER macro retrieving the UIFCPY flag from the counter value. + * @note ex: @ref __LL_TIM_GETFLAG_UIFCPY (@ref LL_TIM_GetCounter ()); + * @note Relevant only if UIF flag remapping has been enabled (UIF status bit is copied + * to TIMx_CNT register bit 31) + * @param __CNT__ Counter value + * @retval UIF status bit + */ +#define __LL_TIM_GETFLAG_UIFCPY(__CNT__) \ + (READ_BIT((__CNT__), TIM_CNT_UIFCPY) >> TIM_CNT_UIFCPY_Pos) + +/** + * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. + * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @param __DT__ deadtime duration (in ns) + * @retval DTG[0:7] + */ +#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ + ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ + (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\ + 0U) + +/** + * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. + * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CNTCLK__ counter clock frequency (in Hz) + * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ + (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((((__TIMCLK__) + (__CNTCLK__)/2U)/(__CNTCLK__)) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. + * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ + ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the compare value required to achieve the required timer output compare + * active/inactive delay. + * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration + * (when the timer operates in one pulse mode). + * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro retrieving the ratio of the input capture prescaler + * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); + * @param __ICPSC__ This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval Input capture prescaler ratio (1, 2, 4 or 8) + */ +#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ + ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_LL_EF_Time_Base Time Base configuration + * @{ + */ +/** + * @brief Enable timer counter. + * @rmtoll CR1 CEN LL_TIM_EnableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Disable timer counter. + * @rmtoll CR1 CEN LL_TIM_DisableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Indicates whether the timer counter is enabled. + * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable update event generation. + * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Disable update event generation. + * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Indicates whether update event generation is enabled. + * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent + * @param TIMx Timer instance + * @retval Inverted state of bit (0 or 1). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL); +} + +/** + * @brief Set update event source + * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events + * generate an update interrupt or DMA request if enabled: + * - Counter overflow/underflow + * - Setting the UG bit + * - Update generation through the slave mode controller + * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter + * overflow/underflow generates an update interrupt or DMA request if enabled. + * @rmtoll CR1 URS LL_TIM_SetUpdateSource + * @param TIMx Timer instance + * @param UpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); +} + +/** + * @brief Get actual event update source + * @rmtoll CR1 URS LL_TIM_GetUpdateSource + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + */ +__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); +} + +/** + * @brief Set one pulse mode (one shot v.s. repetitive). + * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode + * @param TIMx Timer instance + * @param OnePulseMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); +} + +/** + * @brief Get actual one pulse mode. + * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + */ +__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); +} + +/** + * @brief Set the timer counter counting mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n + * CR1 CMS LL_TIM_SetCounterMode + * @param TIMx Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) +{ + MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode); +} + +/** + * @brief Get actual counter mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n + * CR1 CMS LL_TIM_GetCounterMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(const TIM_TypeDef *TIMx) +{ + uint32_t counter_mode; + + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS)); + + if (counter_mode == 0U) + { + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); + } + + return counter_mode; +} + +/** + * @brief Enable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Disable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Indicates whether auto-reload (ARR) preload is enabled. + * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL); +} + +/** + * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators + * (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_SetClockDivision + * @param TIMx Timer instance + * @param ClockDivision This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); +} + +/** + * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time + * generators (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_GetClockDivision + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + */ +__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); +} + +/** + * @brief Set the counter value. + * @rmtoll CNT CNT LL_TIM_SetCounter + * @param TIMx Timer instance + * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF) + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) +{ + WRITE_REG(TIMx->CNT, Counter); +} + +/** + * @brief Get the counter value. + * @rmtoll CNT CNT LL_TIM_GetCounter + * @param TIMx Timer instance + * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF) + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounter(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CNT)); +} + +/** + * @brief Get the current direction of the counter + * @rmtoll CR1 DIR LL_TIM_GetDirection + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERDIRECTION_UP + * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetDirection(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); +} + +/** + * @brief Set the prescaler value. + * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). + * @note The prescaler can be changed on the fly as this control register is buffered. The new + * prescaler ratio is taken into account at the next update event. + * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter + * @rmtoll PSC PSC LL_TIM_SetPrescaler + * @param TIMx Timer instance + * @param Prescaler between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) +{ + WRITE_REG(TIMx->PSC, Prescaler); +} + +/** + * @brief Get the prescaler value. + * @rmtoll PSC PSC LL_TIM_GetPrescaler + * @param TIMx Timer instance + * @retval Prescaler value between Min_Data=0 and Max_Data=65535 + */ +__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->PSC)); +} + +/** + * @brief Set the auto-reload value. + * @note The counter is blocked while the auto-reload value is null. + * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter + * @rmtoll ARR ARR LL_TIM_SetAutoReload + * @param TIMx Timer instance + * @param AutoReload between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) +{ + WRITE_REG(TIMx->ARR, AutoReload); +} + +/** + * @brief Get the auto-reload value. + * @rmtoll ARR ARR LL_TIM_GetAutoReload + * @param TIMx Timer instance + * @retval Auto-reload value + */ +__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->ARR)); +} + +/** + * @brief Set the repetition counter value. + * @note For advanced timer instances RepetitionCounter can be up to 65535. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_SetRepetitionCounter + * @param TIMx Timer instance + * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) +{ + WRITE_REG(TIMx->RCR, RepetitionCounter); +} + +/** + * @brief Get the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_GetRepetitionCounter + * @param TIMx Timer instance + * @retval Repetition counter value + */ +__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->RCR)); +} + +/** + * @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31). + * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read + * in an atomic way. + * @rmtoll CR1 UIFREMAP LL_TIM_EnableUIFRemap + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUIFRemap(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); +} + +/** + * @brief Disable update interrupt flag (UIF) remapping. + * @rmtoll CR1 UIFREMAP LL_TIM_DisableUIFRemap + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUIFRemap(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UIFREMAP); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) copy is set. + * @param Counter Counter value + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveUIFCPY(const uint32_t Counter) +{ + return (((Counter & TIM_CNT_UIFCPY) == (TIM_CNT_UIFCPY)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration + * @{ + */ +/** + * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, + * they are updated only when a commutation event (COM) occurs. + * @note Only on channels that have a complementary output. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Indicates whether the capture/compare control bits (CCxE, CCxNE and OCxM) preload is enabled. + * @rmtoll CR2 CCPC LL_TIM_CC_IsEnabledPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledPreload(TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_CCPC) == (TIM_CR2_CCPC)) ? 1UL : 0UL); +} + +/** + * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate + * @param TIMx Timer instance + * @param CCUpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); +} + +/** + * @brief Set the trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger + * @param TIMx Timer instance + * @param DMAReqTrigger This parameter can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); +} + +/** + * @brief Get actual trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + */ +__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); +} + +/** + * @brief Set the lock level to freeze the + * configuration of several capture/compare parameters. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * the lock mechanism is supported by a timer instance. + * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel + * @param TIMx Timer instance + * @param LockLevel This parameter can be one of the following values: + * @arg @ref LL_TIM_LOCKLEVEL_OFF + * @arg @ref LL_TIM_LOCKLEVEL_1 + * @arg @ref LL_TIM_LOCKLEVEL_2 + * @arg @ref LL_TIM_LOCKLEVEL_3 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); +} + +/** + * @brief Enable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n + * CCER CC1NE LL_TIM_CC_EnableChannel\n + * CCER CC2E LL_TIM_CC_EnableChannel\n + * CCER CC2NE LL_TIM_CC_EnableChannel\n + * CCER CC3E LL_TIM_CC_EnableChannel\n + * CCER CC3NE LL_TIM_CC_EnableChannel\n + * CCER CC4E LL_TIM_CC_EnableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + SET_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Disable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n + * CCER CC1NE LL_TIM_CC_DisableChannel\n + * CCER CC2E LL_TIM_CC_DisableChannel\n + * CCER CC2NE LL_TIM_CC_DisableChannel\n + * CCER CC3E LL_TIM_CC_DisableChannel\n + * CCER CC3NE LL_TIM_CC_DisableChannel\n + * CCER CC4E LL_TIM_CC_DisableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + CLEAR_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Indicate whether channel(s) is(are) enabled. + * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n + * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC2E LL_TIM_CC_IsEnabledChannel\n + * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC3E LL_TIM_CC_IsEnabledChannel\n + * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC4E LL_TIM_CC_IsEnabledChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(const TIM_TypeDef *TIMx, uint32_t Channels) +{ + return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration + * @{ + */ +/** + * @brief Configure an output channel. + * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n + * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n + * CCER CC1P LL_TIM_OC_ConfigOutput\n + * CCER CC2P LL_TIM_OC_ConfigOutput\n + * CCER CC3P LL_TIM_OC_ConfigOutput\n + * CCER CC4P LL_TIM_OC_ConfigOutput\n + * CR2 OIS1 LL_TIM_OC_ConfigOutput\n + * CR2 OIS2 LL_TIM_OC_ConfigOutput\n + * CR2 OIS3 LL_TIM_OC_ConfigOutput\n + * CR2 OIS4 LL_TIM_OC_ConfigOutput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW + * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), + (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), + (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Define the behavior of the output reference signal OCxREF from which + * OCx and OCxN (when relevant) are derived. + * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n + * CCMR1 OC2M LL_TIM_OC_SetMode\n + * CCMR2 OC3M LL_TIM_OC_SetMode\n + * CCMR2 OC4M LL_TIM_OC_SetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM1 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM2 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM1 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM2 + * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM1 + * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Get the output compare mode of an output channel. + * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n + * CCMR1 OC2M LL_TIM_OC_GetMode\n + * CCMR2 OC3M LL_TIM_OC_GetMode\n + * CCMR2 OC4M LL_TIM_OC_GetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM1 + * @arg @ref LL_TIM_OCMODE_RETRIG_OPM2 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM1 + * @arg @ref LL_TIM_OCMODE_COMBINED_PWM2 + * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM1 + * @arg @ref LL_TIM_OCMODE_ASYMMETRIC_PWM2 + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Set the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n + * CCER CC1NP LL_TIM_OC_SetPolarity\n + * CCER CC2P LL_TIM_OC_SetPolarity\n + * CCER CC2NP LL_TIM_OC_SetPolarity\n + * CCER CC3P LL_TIM_OC_SetPolarity\n + * CCER CC3NP LL_TIM_OC_SetPolarity\n + * CCER CC4P LL_TIM_OC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n + * CCER CC1NP LL_TIM_OC_GetPolarity\n + * CCER CC2P LL_TIM_OC_GetPolarity\n + * CCER CC2NP LL_TIM_OC_GetPolarity\n + * CCER CC3P LL_TIM_OC_GetPolarity\n + * CCER CC3NP LL_TIM_OC_GetPolarity\n + * CCER CC4P LL_TIM_OC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the IDLE state of an output channel + * @note This function is significant only for the timer instances + * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) + * can be used to check whether or not a timer instance provides + * a break input. + * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n + * CR2 OIS1N LL_TIM_OC_SetIdleState\n + * CR2 OIS2 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS3 LL_TIM_OC_SetIdleState\n + * CR2 OIS3N LL_TIM_OC_SetIdleState\n + * CR2 OIS4 LL_TIM_OC_SetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param IdleState This parameter can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Get the IDLE state of an output channel + * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n + * CR2 OIS1N LL_TIM_OC_GetIdleState\n + * CR2 OIS2 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS3 LL_TIM_OC_GetIdleState\n + * CR2 OIS3N LL_TIM_OC_GetIdleState\n + * CR2 OIS4 LL_TIM_OC_GetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Enable fast mode for the output channel. + * @note Acts only if the channel is configured in PWM1 or PWM2 mode. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n + * CCMR1 OC2FE LL_TIM_OC_EnableFast\n + * CCMR2 OC3FE LL_TIM_OC_EnableFast\n + * CCMR2 OC4FE LL_TIM_OC_EnableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Disable fast mode for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n + * CCMR1 OC2FE LL_TIM_OC_DisableFast\n + * CCMR2 OC3FE LL_TIM_OC_DisableFast\n + * CCMR2 OC4FE LL_TIM_OC_DisableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Indicates whether fast mode is enabled for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n + * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n + * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC4PE LL_TIM_OC_EnablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n + * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC4PE LL_TIM_OC_DisablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n + * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n + * CCMR1 OC2CE LL_TIM_OC_EnableClear\n + * CCMR2 OC3CE LL_TIM_OC_EnableClear\n + * CCMR2 OC4CE LL_TIM_OC_EnableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable clearing the output channel on an external event. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n + * CCMR1 OC2CE LL_TIM_OC_DisableClear\n + * CCMR2 OC3CE LL_TIM_OC_DisableClear\n + * CCMR2 OC4CE LL_TIM_OC_DisableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates clearing the output channel on an external event is enabled for the output channel. + * @note This function enables clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n + * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of + * the Ocx and OCxN signals). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * dead-time insertion feature is supported by a timer instance. + * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter + * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime + * @param TIMx Timer instance + * @param DeadTime between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); +} + +/** + * @brief Set compare value for output channel 1 (TIMx_CCR1). + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR1, CompareValue); +} + +/** + * @brief Set compare value for output channel 2 (TIMx_CCR2). + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR2, CompareValue); +} + +/** + * @brief Set compare value for output channel 3 (TIMx_CCR3). + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR3, CompareValue); +} + +/** + * @brief Set compare value for output channel 4 (TIMx_CCR4). + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR4, CompareValue); +} + +/** + * @brief Get compare value (TIMx_CCR1) set for output channel 1. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get compare value (TIMx_CCR2) set for output channel 2. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get compare value (TIMx_CCR3) set for output channel 3. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get compare value (TIMx_CCR4) set for output channel 4. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration + * @{ + */ +/** + * @brief Configure input channel. + * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n + * CCMR1 IC1PSC LL_TIM_IC_Config\n + * CCMR1 IC1F LL_TIM_IC_Config\n + * CCMR1 CC2S LL_TIM_IC_Config\n + * CCMR1 IC2PSC LL_TIM_IC_Config\n + * CCMR1 IC2F LL_TIM_IC_Config\n + * CCMR2 CC3S LL_TIM_IC_Config\n + * CCMR2 IC3PSC LL_TIM_IC_Config\n + * CCMR2 IC3F LL_TIM_IC_Config\n + * CCMR2 CC4S LL_TIM_IC_Config\n + * CCMR2 IC4PSC LL_TIM_IC_Config\n + * CCMR2 IC4F LL_TIM_IC_Config\n + * CCER CC1P LL_TIM_IC_Config\n + * CCER CC1NP LL_TIM_IC_Config\n + * CCER CC2P LL_TIM_IC_Config\n + * CCER CC2NP LL_TIM_IC_Config\n + * CCER CC3P LL_TIM_IC_Config\n + * CCER CC3NP LL_TIM_IC_Config\n + * CCER CC4P LL_TIM_IC_Config\n + * CCER CC4NP LL_TIM_IC_Config + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC + * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 + * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), + ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \ + << SHIFT_TAB_ICxx[iChannel]); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_SetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICActiveInput This parameter can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_GetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the prescaler of input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current prescaler value acting on an input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n + * CCMR1 IC2F LL_TIM_IC_SetFilter\n + * CCMR2 IC3F LL_TIM_IC_SetFilter\n + * CCMR2 IC4F LL_TIM_IC_SetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n + * CCMR1 IC2F LL_TIM_IC_GetFilter\n + * CCMR2 IC3F LL_TIM_IC_GetFilter\n + * CCMR2 IC4F LL_TIM_IC_GetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n + * CCER CC1NP LL_TIM_IC_SetPolarity\n + * CCER CC2P LL_TIM_IC_SetPolarity\n + * CCER CC2NP LL_TIM_IC_SetPolarity\n + * CCER CC3P LL_TIM_IC_SetPolarity\n + * CCER CC3NP LL_TIM_IC_SetPolarity\n + * CCER CC4P LL_TIM_IC_SetPolarity\n + * CCER CC4NP LL_TIM_IC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + ICPolarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the current input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n + * CCER CC1NP LL_TIM_IC_GetPolarity\n + * CCER CC2P LL_TIM_IC_GetPolarity\n + * CCER CC2NP LL_TIM_IC_GetPolarity\n + * CCER CC3P LL_TIM_IC_GetPolarity\n + * CCER CC3NP LL_TIM_IC_GetPolarity\n + * CCER CC4P LL_TIM_IC_GetPolarity\n + * CCER CC4NP LL_TIM_IC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> + SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL); +} + +/** + * @brief Get captured value for input channel 1. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * input channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get captured value for input channel 2. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * input channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get captured value for input channel 3. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * input channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get captured value for input channel 4. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * input channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection + * @{ + */ +/** + * @brief Enable external clock mode 2. + * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_EnableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Disable external clock mode 2. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_DisableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Indicate whether external clock mode 2 is enabled. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL); +} + +/** + * @brief Set the clock source of the counter clock. + * @note when selected clock source is external clock mode 1, the timer input + * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() + * function. This timer input must be configured by calling + * the @ref LL_TIM_IC_Config() function. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode1. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR SMS LL_TIM_SetClockSource\n + * SMCR ECE LL_TIM_SetClockSource + * @param TIMx Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); +} + +/** + * @brief Set the encoder interface mode. + * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the encoder mode. + * @rmtoll SMCR SMS LL_TIM_SetEncoderMode + * @param TIMx Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 + * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 + * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration + * @{ + */ +/** + * @brief Set the trigger output (TRGO) used for timer synchronization . + * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can operate as a master timer. + * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput + * @param TIMx Timer instance + * @param TimerSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO_RESET + * @arg @ref LL_TIM_TRGO_ENABLE + * @arg @ref LL_TIM_TRGO_UPDATE + * @arg @ref LL_TIM_TRGO_CC1IF + * @arg @ref LL_TIM_TRGO_OC1REF + * @arg @ref LL_TIM_TRGO_OC2REF + * @arg @ref LL_TIM_TRGO_OC3REF + * @arg @ref LL_TIM_TRGO_OC4REF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); +} + +/** + * @brief Set the synchronization mode of a slave timer. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR SMS LL_TIM_SetSlaveMode + * @param TIMx Timer instance + * @param SlaveMode This parameter can be one of the following values: + * @arg @ref LL_TIM_SLAVEMODE_DISABLED + * @arg @ref LL_TIM_SLAVEMODE_RESET + * @arg @ref LL_TIM_SLAVEMODE_GATED + * @arg @ref LL_TIM_SLAVEMODE_TRIGGER + * @arg @ref LL_TIM_SLAVEMODE_COMBINED_RESETTRIGGER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); +} + +/** + * @brief Set the selects the trigger input to be used to synchronize the counter. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR TS LL_TIM_SetTriggerInput + * @param TIMx Timer instance + * @param TriggerInput This parameter can be one of the following values: + * @arg @ref LL_TIM_TS_ITR0 + * @arg @ref LL_TIM_TS_TI1F_ED + * @arg @ref LL_TIM_TS_TI1FP1 + * @arg @ref LL_TIM_TS_TI2FP2 + * @arg @ref LL_TIM_TS_ETRF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); +} + +/** + * @brief Enable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Disable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Indicates whether the Master/Slave mode is enabled. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL); +} + +/** + * @brief Configure the external trigger (ETR) input. + * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an external trigger input. + * @rmtoll SMCR ETP LL_TIM_ConfigETR\n + * SMCR ETPS LL_TIM_ConfigETR\n + * SMCR ETF LL_TIM_ConfigETR + * @param TIMx Timer instance + * @param ETRPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED + * @arg @ref LL_TIM_ETR_POLARITY_INVERTED + * @param ETRPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 + * @param ETRFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_FILTER_FDIV1 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, + uint32_t ETRFilter) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); +} + +/** + * @brief Select the external trigger (ETR) input source. + * @note Macro IS_TIM_ETRSEL_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports ETR source selection. + * @note When this function is called with LL_TIM_ETRSOURCE_LEGACY, + * ETR source relies on TIMx ETR remapping capability configured through + * the function @ref LL_TIM_SetRemap(). + * @rmtoll AF1 ETRSEL LL_TIM_SetETRSource + * @param TIMx Timer instance + * @param ETRSource This parameter can be one of the following values: + * @arg @ref LL_TIM_ETRSOURCE_LEGACY + * @arg @ref LL_TIM_ETRSOURCE_COMP1 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetETRSource(TIM_TypeDef *TIMx, uint32_t ETRSource) +{ + MODIFY_REG(TIMx->AF1, TIMx_AF1_ETRSEL, ETRSource); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Break_Function Break function configuration + * @{ + */ +/** + * @brief Enable the break function. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKE LL_TIM_EnableBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); +} + +/** + * @brief Disable the break function. + * @rmtoll BDTR BKE LL_TIM_DisableBRK + * @param TIMx Timer instance + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); +} + +/** + * @brief Configure the break input. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @note In bidirectional mode (BKBID bit set), the Break input is configured both + * in input mode and in open drain output mode. Any active Break event will + * assert a low logic level on the Break input to indicate an internal break + * event to external devices. + * @rmtoll BDTR BKP LL_TIM_ConfigBRK\n + * BDTR BKBID LL_TIM_ConfigBRK + * @param TIMx Timer instance + * @param BreakPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_POLARITY_LOW + * @arg @ref LL_TIM_BREAK_POLARITY_HIGH + * @param BreakAFMode This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_AFMODE_INPUT + * @arg @ref LL_TIM_BREAK_AFMODE_BIDIRECTIONAL + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity, uint32_t BreakAFMode) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP | TIM_BDTR_BKBID, BreakPolarity | BreakAFMode); +} + +/** + * @brief Disarm the break input (when it operates in bidirectional mode). + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @rmtoll BDTR BKDSRM LL_TIM_DisarmBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisarmBRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_BKDSRM); +} + +/** + * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n + * BDTR OSSR LL_TIM_SetOffStates + * @param TIMx Timer instance + * @param OffStateIdle This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSI_DISABLE + * @arg @ref LL_TIM_OSSI_ENABLE + * @param OffStateRun This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSR_DISABLE + * @arg @ref LL_TIM_OSSR_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); +} + +/** + * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Disable automatic output (MOE can be set only by software). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Indicate whether automatic output is enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Indicates whether outputs are enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the signals connected to the designated timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINE LL_TIM_EnableBreakInputSource\n + * AF1 BKCMP1E LL_TIM_EnableBreakInputSource\n + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 + */ +__STATIC_INLINE void LL_TIM_EnableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + SET_BIT(*pReg, Source); +} + +/** + * @brief Disable the signals connected to the designated timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINE LL_TIM_EnableBreakInputSource\n + * AF1 BKCMP1E LL_TIM_EnableBreakInputSource\n + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 + */ +__STATIC_INLINE void LL_TIM_DisableBreakInputSource(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + CLEAR_BIT(*pReg, Source); +} + +/** + * @brief Set the polarity of the break signal for the timer break input. + * @note Macro IS_TIM_BREAKSOURCE_INSTANCE(TIMx) can be used to check whether + * or not a timer instance allows for break input selection. + * @rmtoll AF1 BKINP LL_TIM_SetBreakInputSourcePolarity\n + * AF1 BKCMP1P LL_TIM_SetBreakInputSourcePolarity\n + * @param TIMx Timer instance + * @param BreakInput This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_INPUT_BKIN + * @param Source This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_SOURCE_BKIN + * @arg @ref LL_TIM_BKIN_SOURCE_BKCOMP1 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BKIN_POLARITY_LOW + * @arg @ref LL_TIM_BKIN_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint32_t BreakInput, uint32_t Source, + uint32_t Polarity) +{ + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->AF1) + BreakInput)); + MODIFY_REG(*pReg, (TIMx_AF1_BKINP << TIM_POSITION_BRK_SOURCE), (Polarity << TIM_POSITION_BRK_SOURCE)); +} +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration + * @{ + */ +/** + * @brief Configures the timer DMA burst feature. + * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports the DMA burst mode. + * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n + * DCR DBA LL_TIM_ConfigDMABurst + * @param TIMx Timer instance + * @param DMABurstBaseAddress This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER + * @arg @ref LL_TIM_DMABURST_BASEADDR_SR + * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER + * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT + * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC + * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR + * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 + * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR + * @arg @ref LL_TIM_DMABURST_BASEADDR_OR + * @arg @ref LL_TIM_DMABURST_BASEADDR_AF1 + * @param DMABurstLength This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER + * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) +{ + MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping + * @{ + */ +/** + * @brief Remap TIM inputs (input channel, internal/external triggers). + * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not + * a some timer inputs can be remapped. + * @rmtoll TIM2_OR ETR_RMP LL_TIM_SetRemap\n + * TIM2_OR TI4_RMP LL_TIM_SetRemap\n + * TIM16_OR TI1_RMP LL_TIM_SetRemap + * @param TIMx Timer instance + * @param Remap Remap param depends on the TIMx. Description available only + * in CHM version of the User Manual (not in .pdf). + * Otherwise see Reference Manual description of OR registers. + * + * Below description summarizes "Timer Instance" and "Remap" param combinations: + * + * TIM2: any combination of ETR_RMP, TI4_RMP where + * + * . . ETR_RMP can be one of the following values + * @arg @ref LL_TIM_TIM1_ETR_RMP_GPIO + * @arg @ref LL_TIM_TIM1_ETR_RMP_ADC_AWD + * + * . . TI4_RMP can be one of the following values + * @arg @ref LL_TIM_TIM1_TI4_RMP_GPIO + * @arg @ref LL_TIM_TIM1_TI4_RMP_COMP1 + * + * TIM16: one of the following values + * + * @arg @ref LL_TIM_TIM16_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM16_TI1_RMP_LCO + * @arg @ref LL_TIM_TIM16_TI1_RMP_COMP1 + * @arg @ref LL_TIM_TIM16_TI1_RMP_MCO + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) +{ + MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_OCREF_Clear OCREF_Clear_Management + * @{ + */ +/** + * @brief Set the OCREF clear input source + * @note The OCxREF signal of a given channel can be cleared when a high level is applied on the OCREF_CLR_INPUT + * @note This function can only be used in Output compare and PWM modes. + * @rmtoll SMCR OCCS LL_TIM_SetOCRefClearInputSource + * @param TIMx Timer instance + * @param OCRefClearInputSource This parameter can be one of the following values: + * @arg @ref LL_TIM_OCREF_CLR_INT_OCREF_CLR + * @arg @ref LL_TIM_OCREF_CLR_INT_ETR + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOCRefClearInputSource(TIM_TypeDef *TIMx, uint32_t OCRefClearInputSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_OCCS, OCRefClearInputSource); +} +/** + * @} + */ + +/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management + * @{ + */ +/** + * @brief Clear the update interrupt flag (UIF). + * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). + * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). + * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). + * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). + * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). + * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). + * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). + * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). + * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the commutation interrupt flag (COMIF). + * @rmtoll SR COMIF LL_TIM_ClearFlag_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); +} + +/** + * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). + * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the trigger interrupt flag (TIF). + * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); +} + +/** + * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). + * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break interrupt flag (BIF). + * @rmtoll SR BIF LL_TIM_ClearFlag_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); +} + +/** + * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). + * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). + * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set + * (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). + * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set + * (Capture/Compare 2 over-capture interrupt is pending). + * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). + * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set + * (Capture/Compare 3 over-capture interrupt is pending). + * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). + * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set + * (Capture/Compare 4 over-capture interrupt is pending). + * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_IT_Management IT-Management + * @{ + */ +/** + * @brief Enable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Disable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Indicates whether the update interrupt (UIE) is enabled. + * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Disable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. + * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Disable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. + * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Disable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. + * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Disable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. + * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_EnableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Disable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_DisableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Indicates whether the commutation interrupt (COMIE) is enabled. + * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Disable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Indicates whether the trigger interrupt (TIE) is enabled. + * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_EnableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Disable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_DisableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Indicates whether the break interrupt (BIE) is enabled. + * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Management DMA Management + * @{ + */ +/** + * @brief Enable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Disable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Indicates whether the update DMA request (UDE) is enabled. + * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Disable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. + * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Disable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. + * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Disable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. + * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Disable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. + * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Disable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Indicates whether the trigger interrupt (TDE) is enabled. + * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management + * @{ + */ +/** + * @brief Generate an update event. + * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_UG); +} + +/** + * @brief Generate Capture/Compare 1 event. + * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC1G); +} + +/** + * @brief Generate Capture/Compare 2 event. + * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC2G); +} + +/** + * @brief Generate Capture/Compare 3 event. + * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC3G); +} + +/** + * @brief Generate Capture/Compare 4 event. + * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC4G); +} + +/** + * @brief Generate commutation event. + * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_COMG); +} + +/** + * @brief Generate trigger event. + * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_TG); +} + +/** + * @brief Generate break event. + * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_BG); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx); +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, const LL_TIM_InitTypeDef *TIM_InitStruct); +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, const LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, const LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM2 || TIM16 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32WL3x_LL_TIM_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_usart.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_usart.h new file mode 100644 index 0000000000..41e8b0f200 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_usart.h @@ -0,0 +1,4402 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_usart.h + * @author MCD Application Team + * @brief Header file of USART LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_USART_H +#define STM32WL3x_LL_USART_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(USART1) + +/** @defgroup USART_LL USART + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Variables USART Private Variables + * @{ + */ +/* Array used to get the USART prescaler division decimal values versus @ref USART_LL_EC_PRESCALER values */ +static const uint32_t USART_PRESCALER_TAB[] = +{ + 1UL, + 2UL, + 4UL, + 6UL, + 8UL, + 10UL, + 12UL, + 16UL, + 32UL, + 64UL, + 128UL, + 256UL, + 256UL, + 256UL, + 256UL, + 256UL +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup USART_LL_Private_Constants USART Private Constants + * @{ + */ +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_Private_Macros USART Private Macros + * @{ + */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_ES_INIT USART Exported Init structures + * @{ + */ + +/** + * @brief LL USART Init Structure definition + */ +typedef struct +{ + uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate. + This parameter can be a value of @ref USART_LL_EC_PRESCALER. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetPrescaler().*/ + + uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetBaudRate().*/ + + uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_LL_EC_DATAWIDTH. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetDataWidth().*/ + + uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_LL_EC_STOPBITS. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetStopBitsLength().*/ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_LL_EC_PARITY. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetParity().*/ + + uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_DIRECTION. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetTransferDirection().*/ + + uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_HWCONTROL. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetHWFlowCtrl().*/ + + uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8. + This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING. + + This feature can be modified afterwards using unitary + function @ref LL_USART_SetOverSampling().*/ + +} LL_USART_InitTypeDef; + +/** + * @brief LL USART Clock Init Structure definition + */ +typedef struct +{ + uint32_t ClockOutput; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_LL_EC_CLOCK. + + USART HW configuration can be modified afterwards using unitary functions + @ref LL_USART_EnableSCLKOutput() or @ref LL_USART_DisableSCLKOutput(). + For more details, refer to description of this function. */ + + uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_LL_EC_POLARITY. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPolarity(). + For more details, refer to description of this function. */ + + uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_LL_EC_PHASE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetClockPhase(). + For more details, refer to description of this function. */ + + uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE. + + USART HW configuration can be modified afterwards using unitary + functions @ref LL_USART_SetLastClkPulseOutput(). + For more details, refer to description of this function. */ + +} LL_USART_ClockInitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Constants USART Exported Constants + * @{ + */ + +/** @defgroup USART_LL_EC_CLEAR_FLAG Clear Flags Defines + * @brief Flags defines which can be used with LL_USART_WriteReg function + * @{ + */ +#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */ +#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */ +#define LL_USART_ICR_NECF USART_ICR_NECF /*!< Noise error detected clear flag */ +#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */ +#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */ +#define LL_USART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty clear flag */ +#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */ +#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time clear flag */ +#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection clear flag */ +#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */ +#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout clear flag */ +#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block clear flag */ +#define LL_USART_ICR_UDRCF USART_ICR_UDRCF /*!< SPI Slave Underrun clear flag */ +#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */ +#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_USART_ReadReg function + * @{ + */ +#define LL_USART_ISR_PE USART_ISR_PE /*!< Parity error flag */ +#define LL_USART_ISR_FE USART_ISR_FE /*!< Framing error flag */ +#define LL_USART_ISR_NE USART_ISR_NE /*!< Noise detected flag */ +#define LL_USART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */ +#define LL_USART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */ +#define LL_USART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */ +#define LL_USART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */ +#define LL_USART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/ +#define LL_USART_ISR_LBDF USART_ISR_LBDF /*!< LIN break detection flag */ +#define LL_USART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */ +#define LL_USART_ISR_CTS USART_ISR_CTS /*!< CTS flag */ +#define LL_USART_ISR_RTOF USART_ISR_RTOF /*!< Receiver timeout flag */ +#define LL_USART_ISR_EOBF USART_ISR_EOBF /*!< End of block flag */ +#define LL_USART_ISR_UDR USART_ISR_UDR /*!< SPI Slave underrun error flag */ +#define LL_USART_ISR_ABRE USART_ISR_ABRE /*!< Auto baud rate error flag */ +#define LL_USART_ISR_ABRF USART_ISR_ABRF /*!< Auto baud rate flag */ +#define LL_USART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */ +#define LL_USART_ISR_CMF USART_ISR_CMF /*!< Character match flag */ +#define LL_USART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */ +#define LL_USART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */ +#define LL_USART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */ +#define LL_USART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */ +#define LL_USART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */ +#define LL_USART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */ +#define LL_USART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */ +#define LL_USART_ISR_TCBGT USART_ISR_TCBGT /*!< Transmission complete before guard time completion flag */ +#define LL_USART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */ +#define LL_USART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_USART_ReadReg and LL_USART_WriteReg functions + * @{ + */ +#define LL_USART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */ +#define LL_USART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty interrupt enable */ +#define LL_USART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */ +#define LL_USART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO not full interrupt enable */ +#define LL_USART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */ +#define LL_USART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */ +#define LL_USART_CR1_RTOIE USART_CR1_RTOIE /*!< Receiver timeout interrupt enable */ +#define LL_USART_CR1_EOBIE USART_CR1_EOBIE /*!< End of Block interrupt enable */ +#define LL_USART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */ +#define LL_USART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */ +#define LL_USART_CR2_LBDIE USART_CR2_LBDIE /*!< LIN break detection interrupt enable */ +#define LL_USART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */ +#define LL_USART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */ +#define LL_USART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */ +#define LL_USART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */ +#define LL_USART_CR3_TCBGTIE USART_CR3_TCBGTIE /*!< Transmission complete before guard time interrupt enable */ +#define LL_USART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_FIFOTHRESHOLD FIFO Threshold + * @{ + */ +#define LL_USART_FIFOTHRESHOLD_1_8 0x00000000U /*!< FIFO reaches 1/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_4 0x00000001U /*!< FIFO reaches 1/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_1_2 0x00000002U /*!< FIFO reaches 1/2 of its depth */ +#define LL_USART_FIFOTHRESHOLD_3_4 0x00000003U /*!< FIFO reaches 3/4 of its depth */ +#define LL_USART_FIFOTHRESHOLD_7_8 0x00000004U /*!< FIFO reaches 7/8 of its depth */ +#define LL_USART_FIFOTHRESHOLD_8_8 0x00000005U /*!< FIFO becomes empty for TX and full for RX */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DIRECTION Communication Direction + * @{ + */ +#define LL_USART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */ +#define LL_USART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */ +#define LL_USART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */ +#define LL_USART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PARITY Parity Control + * @{ + */ +#define LL_USART_PARITY_NONE 0x00000000U /*!< Parity control disabled */ +#define LL_USART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */ +#define LL_USART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP Wakeup + * @{ + */ +#define LL_USART_WAKEUP_IDLELINE 0x00000000U /*!< USART wake up from Mute mode on Idle Line */ +#define LL_USART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< USART wake up from Mute mode on Address Mark */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DATAWIDTH Datawidth + * @{ + */ +#define LL_USART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */ +#define LL_USART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_OVERSAMPLING Oversampling + * @{ + */ +#define LL_USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */ +#define LL_USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EC_CLOCK Clock Signal + * @{ + */ + +#define LL_USART_CLOCK_DISABLE 0x00000000U /*!< Clock signal not provided */ +#define LL_USART_CLOCK_ENABLE USART_CR2_CLKEN /*!< Clock signal provided */ +/** + * @} + */ +#endif /*USE_FULL_LL_DRIVER*/ + +/** @defgroup USART_LL_EC_LASTCLKPULSE Last Clock Pulse + * @{ + */ +#define LL_USART_LASTCLKPULSE_NO_OUTPUT 0x00000000U /*!< The clock pulse of the last data bit is not output to the SCLK pin */ +#define LL_USART_LASTCLKPULSE_OUTPUT USART_CR2_LBCL /*!< The clock pulse of the last data bit is output to the SCLK pin */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PHASE Clock Phase + * @{ + */ +#define LL_USART_PHASE_1EDGE 0x00000000U /*!< The first clock transition is the first data capture edge */ +#define LL_USART_PHASE_2EDGE USART_CR2_CPHA /*!< The second clock transition is the first data capture edge */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_POLARITY Clock Polarity + * @{ + */ +#define LL_USART_POLARITY_LOW 0x00000000U /*!< Steady low value on SCLK pin outside transmission window*/ +#define LL_USART_POLARITY_HIGH USART_CR2_CPOL /*!< Steady high value on SCLK pin outside transmission window */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_PRESCALER Clock Source Prescaler + * @{ + */ +#define LL_USART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */ +#define LL_USART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */ +#define LL_USART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */ +#define LL_USART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */ +#define LL_USART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */ +#define LL_USART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */ +#define LL_USART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */ +#define LL_USART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */ +#define LL_USART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */ +#define LL_USART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */ +#define LL_USART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */ +#define LL_USART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_STOPBITS Stop Bits + * @{ + */ +#define LL_USART_STOPBITS_0_5 USART_CR2_STOP_0 /*!< 0.5 stop bit */ +#define LL_USART_STOPBITS_1 0x00000000U /*!< 1 stop bit */ +#define LL_USART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) /*!< 1.5 stop bits */ +#define LL_USART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXRX TX RX Pins Swap + * @{ + */ +#define LL_USART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */ +#define LL_USART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion + * @{ + */ +#define LL_USART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */ +#define LL_USART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion + * @{ + */ +#define LL_USART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */ +#define LL_USART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BINARY_LOGIC Binary Data Inversion + * @{ + */ +#define LL_USART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */ +#define LL_USART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_BITORDER Bit Order + * @{ + */ +#define LL_USART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */ +#define LL_USART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_AUTOBAUD_DETECT_ON Autobaud Detection + * @{ + */ +#define LL_USART_AUTOBAUD_DETECT_ON_STARTBIT 0x00000000U /*!< Measurement of the start bit is used to detect the baud rate */ +#define LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE USART_CR2_ABRMODE_0 /*!< Falling edge to falling edge measurement. Received frame must start with a single bit = 1 -> Frame = Start10xxxxxx */ +#define LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME USART_CR2_ABRMODE_1 /*!< 0x7F frame detection */ +#define LL_USART_AUTOBAUD_DETECT_ON_55_FRAME (USART_CR2_ABRMODE_1 | USART_CR2_ABRMODE_0) /*!< 0x55 frame detection */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_ADDRESS_DETECT Address Length Detection + * @{ + */ +#define LL_USART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */ +#define LL_USART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_HWCONTROL Hardware Control + * @{ + */ +#define LL_USART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */ +#define LL_USART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */ +#define LL_USART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */ +#define LL_USART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_WAKEUP_ON Wakeup Activation + * @{ + */ +#define LL_USART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */ +#define LL_USART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */ +#define LL_USART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_IRDA_POWER IrDA Power + * @{ + */ +#define LL_USART_IRDA_POWER_NORMAL 0x00000000U /*!< IrDA normal power mode */ +#define LL_USART_IRDA_POWER_LOW USART_CR3_IRLP /*!< IrDA low power mode */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_LINBREAK_DETECT LIN Break Detection Length + * @{ + */ +#define LL_USART_LINBREAK_DETECT_10B 0x00000000U /*!< 10-bit break detection method selected */ +#define LL_USART_LINBREAK_DETECT_11B USART_CR2_LBDL /*!< 11-bit break detection method selected */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DE_POLARITY Driver Enable Polarity + * @{ + */ +#define LL_USART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */ +#define LL_USART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */ +/** + * @} + */ + +/** @defgroup USART_LL_EC_DMA_REG_DATA DMA Register Data + * @{ + */ +#define LL_USART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */ +#define LL_USART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup USART_LL_Exported_Macros USART Exported Macros + * @{ + */ + +/** @defgroup USART_LL_EM_WRITE_READ Common Write and read registers Macros + * @{ + */ + +/** + * @brief Write a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be written + * @param __VALUE__ Value to be written in the register + * @retval None + */ +#define LL_USART_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) + +/** + * @brief Read a value in USART register + * @param __INSTANCE__ USART Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_USART_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) +/** + * @} + */ + +/** @defgroup USART_LL_EM_Exported_Macros_Helper Exported_Macros_Helper + * @{ + */ + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 8 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case + */ +#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + (((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))*2U)\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @brief Compute USARTDIV value according to Peripheral Clock and + * expected Baud Rate in 16 bits sampling mode (32 bits value of USARTDIV is returned) + * @param __PERIPHCLK__ Peripheral Clock frequency used for USART instance + * @param __PRESCALER__ This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param __BAUDRATE__ Baud rate value to achieve + * @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case + */ +#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \ + ((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))\ + + ((__BAUDRATE__)/2U))/(__BAUDRATE__)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_LL_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_LL_EF_Configuration Configuration functions + * @{ + */ + +/** + * @brief USART Enable + * @rmtoll CR1 UE LL_USART_Enable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Enable(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief USART Disable (all USART prescalers and outputs are disabled) + * @note When USART is disabled, USART prescalers and outputs are stopped immediately, + * and current operations are discarded. The configuration of the USART is kept, but all the status + * flags, in the USARTx_ISR are set to their default values. + * @rmtoll CR1 UE LL_USART_Disable + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_Disable(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_UE); +} + +/** + * @brief Indicate if USART is enabled + * @rmtoll CR1 UE LL_USART_IsEnabled + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabled(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UE) == (USART_CR1_UE)) ? 1UL : 0UL); +} + +/** + * @brief FIFO Mode Enable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_EnableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableFIFO(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief FIFO Mode Disable + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_DisableFIFO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableFIFO(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR1, USART_CR1_FIFOEN); +} + +/** + * @brief Indicate if FIFO Mode is enabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 FIFOEN LL_USART_IsEnabledFIFO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledFIFO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_FIFOEN) == (USART_CR1_FIFOEN)) ? 1UL : 0UL); +} + +/** + * @brief Configure TX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_SetTXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Return TX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_GetTXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetTXFIFOThreshold(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); +} + +/** + * @brief Configure RX FIFO Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_SetRXFIFOThreshold + * @param USARTx USART Instance + * @param Threshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Return RX FIFO Threshold Configuration + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTCFG LL_USART_GetRXFIFOThreshold + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetRXFIFOThreshold(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); +} + +/** + * @brief Configure TX and RX FIFOs Threshold + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTCFG LL_USART_ConfigFIFOsThreshold\n + * CR3 RXFTCFG LL_USART_ConfigFIFOsThreshold + * @param USARTx USART Instance + * @param TXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @param RXThreshold This parameter can be one of the following values: + * @arg @ref LL_USART_FIFOTHRESHOLD_1_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_1_2 + * @arg @ref LL_USART_FIFOTHRESHOLD_3_4 + * @arg @ref LL_USART_FIFOTHRESHOLD_7_8 + * @arg @ref LL_USART_FIFOTHRESHOLD_8_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigFIFOsThreshold(USART_TypeDef *USARTx, uint32_t TXThreshold, uint32_t RXThreshold) +{ + ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | + (RXThreshold << USART_CR3_RXFTCFG_Pos)); +} + +/** + * @brief USART enabled in STOP Mode. + * @note When this function is enabled, USART is able to wake up the MCU from Stop mode, provided that + * USART clock selection is HSI or LSE in RCC. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_EnableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief USART disabled in STOP Mode. + * @note When this function is disabled, USART is not able to wake up the MCU from Stop mode + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_DisableInStopMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_UESM); +} + +/** + * @brief Indicate if USART is enabled in STOP Mode (able to wake up MCU from Stop mode or not) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR1 UESM LL_USART_IsEnabledInStopMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_UESM) == (USART_CR1_UESM)) ? 1UL : 0UL); +} + +/** + * @brief Receiver Enable (Receiver is enabled and begins searching for a start bit) + * @rmtoll CR1 RE LL_USART_EnableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Receiver Disable + * @rmtoll CR1 RE LL_USART_DisableDirectionRx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE); +} + +/** + * @brief Transmitter Enable + * @rmtoll CR1 TE LL_USART_EnableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Transmitter Disable + * @rmtoll CR1 TE LL_USART_DisableDirectionTx + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE); +} + +/** + * @brief Configure simultaneously enabled/disabled states + * of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_SetTransferDirection\n + * CR1 TE LL_USART_SetTransferDirection + * @param USARTx USART Instance + * @param TransferDirection This parameter can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection) +{ + ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection); +} + +/** + * @brief Return enabled/disabled states of Transmitter and Receiver + * @rmtoll CR1 RE LL_USART_GetTransferDirection\n + * CR1 TE LL_USART_GetTransferDirection + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DIRECTION_NONE + * @arg @ref LL_USART_DIRECTION_RX + * @arg @ref LL_USART_DIRECTION_TX + * @arg @ref LL_USART_DIRECTION_TX_RX + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferDirection(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_RE | USART_CR1_TE)); +} + +/** + * @brief Configure Parity (enabled/disabled and parity mode if enabled). + * @note This function selects if hardware parity control (generation and detection) is enabled or disabled. + * When the parity control is enabled (Odd or Even), computed parity bit is inserted at the MSB position + * (9th or 8th bit depending on data width) and parity is checked on the received data. + * @rmtoll CR1 PS LL_USART_SetParity\n + * CR1 PCE LL_USART_SetParity + * @param USARTx USART Instance + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @retval None + */ +__STATIC_INLINE void LL_USART_SetParity(USART_TypeDef *USARTx, uint32_t Parity) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE, Parity); +} + +/** + * @brief Return Parity configuration (enabled/disabled and parity mode if enabled) + * @rmtoll CR1 PS LL_USART_GetParity\n + * CR1 PCE LL_USART_GetParity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + */ +__STATIC_INLINE uint32_t LL_USART_GetParity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE)); +} + +/** + * @brief Set Receiver Wake Up method from Mute mode. + * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod + * @param USARTx USART Instance + * @param Method This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWakeUpMethod(USART_TypeDef *USARTx, uint32_t Method) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_WAKE, Method); +} + +/** + * @brief Return Receiver Wake Up method from Mute mode + * @rmtoll CR1 WAKE LL_USART_GetWakeUpMethod + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_IDLELINE + * @arg @ref LL_USART_WAKEUP_ADDRESSMARK + */ +__STATIC_INLINE uint32_t LL_USART_GetWakeUpMethod(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_WAKE)); +} + +/** + * @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_SetDataWidth\n + * CR1 M1 LL_USART_SetDataWidth + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDataWidth(USART_TypeDef *USARTx, uint32_t DataWidth) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_M, DataWidth); +} + +/** + * @brief Return Word length (i.e. nb of data bits, excluding start and stop bits) + * @rmtoll CR1 M0 LL_USART_GetDataWidth\n + * CR1 M1 LL_USART_GetDataWidth + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + */ +__STATIC_INLINE uint32_t LL_USART_GetDataWidth(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_M)); +} + +/** + * @brief Allow switch between Mute Mode and Active mode + * @rmtoll CR1 MME LL_USART_EnableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Prevent Mute Mode use. Set Receiver in active mode permanently. + * @rmtoll CR1 MME LL_USART_DisableMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_MME); +} + +/** + * @brief Indicate if switch between Mute Mode and Active mode is allowed + * @rmtoll CR1 MME LL_USART_IsEnabledMuteMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledMuteMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_MME) == (USART_CR1_MME)) ? 1UL : 0UL); +} + +/** + * @brief Set Oversampling to 8-bit or 16-bit mode + * @rmtoll CR1 OVER8 LL_USART_SetOverSampling + * @param USARTx USART Instance + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetOverSampling(USART_TypeDef *USARTx, uint32_t OverSampling) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_OVER8, OverSampling); +} + +/** + * @brief Return Oversampling mode + * @rmtoll CR1 OVER8 LL_USART_GetOverSampling + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + */ +__STATIC_INLINE uint32_t LL_USART_GetOverSampling(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_OVER8)); +} + +/** + * @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_SetLastClkPulseOutput + * @param USARTx USART Instance + * @param LastBitClockPulse This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLastClkPulseOutput(USART_TypeDef *USARTx, uint32_t LastBitClockPulse) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBCL, LastBitClockPulse); +} + +/** + * @brief Retrieve Clock pulse of the last data bit output configuration + * (Last bit Clock pulse output to the SCLK pin or not) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 LBCL LL_USART_GetLastClkPulseOutput + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + */ +__STATIC_INLINE uint32_t LL_USART_GetLastClkPulseOutput(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBCL)); +} + +/** + * @brief Select the phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_SetClockPhase + * @param USARTx USART Instance + * @param ClockPhase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPhase(USART_TypeDef *USARTx, uint32_t ClockPhase) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA, ClockPhase); +} + +/** + * @brief Return phase of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPHA LL_USART_GetClockPhase + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPhase(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPHA)); +} + +/** + * @brief Select the polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_SetClockPolarity + * @param USARTx USART Instance + * @param ClockPolarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_USART_SetClockPolarity(USART_TypeDef *USARTx, uint32_t ClockPolarity) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPOL, ClockPolarity); +} + +/** + * @brief Return polarity of the clock output on the SCLK pin in synchronous mode + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CPOL LL_USART_GetClockPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + */ +__STATIC_INLINE uint32_t LL_USART_GetClockPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_CPOL)); +} + +/** + * @brief Configure Clock signal format (Phase Polarity and choice about output of last bit clock pulse) + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clock Phase configuration using @ref LL_USART_SetClockPhase() function + * - Clock Polarity configuration using @ref LL_USART_SetClockPolarity() function + * - Output of Last bit Clock pulse configuration using @ref LL_USART_SetLastClkPulseOutput() function + * @rmtoll CR2 CPHA LL_USART_ConfigClock\n + * CR2 CPOL LL_USART_ConfigClock\n + * CR2 LBCL LL_USART_ConfigClock + * @param USARTx USART Instance + * @param Phase This parameter can be one of the following values: + * @arg @ref LL_USART_PHASE_1EDGE + * @arg @ref LL_USART_PHASE_2EDGE + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_POLARITY_LOW + * @arg @ref LL_USART_POLARITY_HIGH + * @param LBCPOutput This parameter can be one of the following values: + * @arg @ref LL_USART_LASTCLKPULSE_NO_OUTPUT + * @arg @ref LL_USART_LASTCLKPULSE_OUTPUT + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigClock(USART_TypeDef *USARTx, uint32_t Phase, uint32_t Polarity, uint32_t LBCPOutput) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, Phase | Polarity | LBCPOutput); +} + +/** + * @brief Configure Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_SetPrescaler + * @param USARTx USART Instance + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->PRESC, USART_PRESC_PRESCALER, (uint16_t)PrescalerValue); +} + +/** + * @brief Retrieve the Clock source prescaler for baudrate generator and oversampling + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll PRESC PRESCALER LL_USART_GetPrescaler + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + */ +__STATIC_INLINE uint32_t LL_USART_GetPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->PRESC, USART_PRESC_PRESCALER)); +} + +/** + * @brief Enable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_EnableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSCLKOutput(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Disable Clock output on SCLK pin + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_DisableSCLKOutput + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSCLKOutput(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Indicate if Clock output on SCLK pin is enabled + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @rmtoll CR2 CLKEN LL_USART_IsEnabledSCLKOutput + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSCLKOutput(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_CLKEN) == (USART_CR2_CLKEN)) ? 1UL : 0UL); +} + +/** + * @brief Set the length of the stop bits + * @rmtoll CR2 STOP LL_USART_SetStopBitsLength + * @param USARTx USART Instance + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetStopBitsLength(USART_TypeDef *USARTx, uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Retrieve the length of the stop bits + * @rmtoll CR2 STOP LL_USART_GetStopBitsLength + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + */ +__STATIC_INLINE uint32_t LL_USART_GetStopBitsLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_STOP)); +} + +/** + * @brief Configure Character frame format (Datawidth, Parity control, Stop Bits) + * @note Call of this function is equivalent to following function call sequence : + * - Data Width configuration using @ref LL_USART_SetDataWidth() function + * - Parity Control and mode configuration using @ref LL_USART_SetParity() function + * - Stop bits configuration using @ref LL_USART_SetStopBitsLength() function + * @rmtoll CR1 PS LL_USART_ConfigCharacter\n + * CR1 PCE LL_USART_ConfigCharacter\n + * CR1 M0 LL_USART_ConfigCharacter\n + * CR1 M1 LL_USART_ConfigCharacter\n + * CR2 STOP LL_USART_ConfigCharacter + * @param USARTx USART Instance + * @param DataWidth This parameter can be one of the following values: + * @arg @ref LL_USART_DATAWIDTH_7B + * @arg @ref LL_USART_DATAWIDTH_8B + * @arg @ref LL_USART_DATAWIDTH_9B + * @param Parity This parameter can be one of the following values: + * @arg @ref LL_USART_PARITY_NONE + * @arg @ref LL_USART_PARITY_EVEN + * @arg @ref LL_USART_PARITY_ODD + * @param StopBits This parameter can be one of the following values: + * @arg @ref LL_USART_STOPBITS_0_5 + * @arg @ref LL_USART_STOPBITS_1 + * @arg @ref LL_USART_STOPBITS_1_5 + * @arg @ref LL_USART_STOPBITS_2 + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigCharacter(USART_TypeDef *USARTx, uint32_t DataWidth, uint32_t Parity, + uint32_t StopBits) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_PS | USART_CR1_PCE | USART_CR1_M, Parity | DataWidth); + MODIFY_REG(USARTx->CR2, USART_CR2_STOP, StopBits); +} + +/** + * @brief Configure TX/RX pins swapping setting. + * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap + * @param USARTx USART Instance + * @param SwapConfig This parameter can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXRXSwap(USART_TypeDef *USARTx, uint32_t SwapConfig) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_SWAP, SwapConfig); +} + +/** + * @brief Retrieve TX/RX pins swapping configuration. + * @rmtoll CR2 SWAP LL_USART_GetTXRXSwap + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXRX_STANDARD + * @arg @ref LL_USART_TXRX_SWAPPED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXRXSwap(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_SWAP)); +} + +/** + * @brief Configure RX pin active level logic + * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_RXINV, PinInvMethod); +} + +/** + * @brief Retrieve RX pin active level logic configuration + * @rmtoll CR2 RXINV LL_USART_GetRXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_RXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_RXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetRXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_RXINV)); +} + +/** + * @brief Configure TX pin active level logic + * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel + * @param USARTx USART Instance + * @param PinInvMethod This parameter can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTXPinLevel(USART_TypeDef *USARTx, uint32_t PinInvMethod) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_TXINV, PinInvMethod); +} + +/** + * @brief Retrieve TX pin active level logic configuration + * @rmtoll CR2 TXINV LL_USART_GetTXPinLevel + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_TXPIN_LEVEL_STANDARD + * @arg @ref LL_USART_TXPIN_LEVEL_INVERTED + */ +__STATIC_INLINE uint32_t LL_USART_GetTXPinLevel(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_TXINV)); +} + +/** + * @brief Configure Binary data logic. + * @note Allow to define how Logical data from the data register are send/received : + * either in positive/direct logic (1=H, 0=L) or in negative/inverse logic (1=L, 0=H) + * @rmtoll CR2 DATAINV LL_USART_SetBinaryDataLogic + * @param USARTx USART Instance + * @param DataLogic This parameter can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBinaryDataLogic(USART_TypeDef *USARTx, uint32_t DataLogic) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_DATAINV, DataLogic); +} + +/** + * @brief Retrieve Binary data configuration + * @rmtoll CR2 DATAINV LL_USART_GetBinaryDataLogic + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BINARY_LOGIC_POSITIVE + * @arg @ref LL_USART_BINARY_LOGIC_NEGATIVE + */ +__STATIC_INLINE uint32_t LL_USART_GetBinaryDataLogic(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_DATAINV)); +} + +/** + * @brief Configure transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_SetTransferBitOrder + * @param USARTx USART Instance + * @param BitOrder This parameter can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + * @retval None + */ +__STATIC_INLINE void LL_USART_SetTransferBitOrder(USART_TypeDef *USARTx, uint32_t BitOrder) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_MSBFIRST, BitOrder); +} + +/** + * @brief Return transfer bit order (either Less or Most Significant Bit First) + * @note MSB First means data is transmitted/received with the MSB first, following the start bit. + * LSB First means data is transmitted/received with data bit 0 first, following the start bit. + * @rmtoll CR2 MSBFIRST LL_USART_GetTransferBitOrder + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_BITORDER_LSBFIRST + * @arg @ref LL_USART_BITORDER_MSBFIRST + */ +__STATIC_INLINE uint32_t LL_USART_GetTransferBitOrder(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_MSBFIRST)); +} + +/** + * @brief Enable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_EnableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Disable Auto Baud-Rate Detection + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_DisableAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableAutoBaudRate(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_ABREN); +} + +/** + * @brief Indicate if Auto Baud-Rate Detection mechanism is enabled + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABREN LL_USART_IsEnabledAutoBaud + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledAutoBaud(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_ABREN) == (USART_CR2_ABREN)) ? 1UL : 0UL); +} + +/** + * @brief Set Auto Baud-Rate mode bits + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_SetAutoBaudRateMode + * @param USARTx USART Instance + * @param AutoBaudRateMode This parameter can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + * @retval None + */ +__STATIC_INLINE void LL_USART_SetAutoBaudRateMode(USART_TypeDef *USARTx, uint32_t AutoBaudRateMode) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ABRMODE, AutoBaudRateMode); +} + +/** + * @brief Return Auto Baud-Rate mode + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll CR2 ABRMODE LL_USART_GetAutoBaudRateMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_STARTBIT + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_FALLINGEDGE + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_7F_FRAME + * @arg @ref LL_USART_AUTOBAUD_DETECT_ON_55_FRAME + */ +__STATIC_INLINE uint32_t LL_USART_GetAutoBaudRateMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ABRMODE)); +} + +/** + * @brief Enable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_EnableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRxTimeout(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Disable Receiver Timeout + * @rmtoll CR2 RTOEN LL_USART_DisableRxTimeout + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRxTimeout(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_RTOEN); +} + +/** + * @brief Indicate if Receiver Timeout feature is enabled + * @rmtoll CR2 RTOEN LL_USART_IsEnabledRxTimeout + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledRxTimeout(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_RTOEN) == (USART_CR2_RTOEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Address of the USART node. + * @note This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with address mark detection. + * @note 4bits address node is used when 4-bit Address Detection is selected in ADDM7. + * (b7-b4 should be set to 0) + * 8bits address node is used when 7-bit Address Detection is selected in ADDM7. + * (This is used in multiprocessor communication during Mute mode or Stop mode, + * for wake up with 7-bit address mark detection. + * The MSB of the character sent by the transmitter should be equal to 1. + * It may also be used for character detection during normal reception, + * Mute mode inactive (for example, end of block detection in ModBus protocol). + * In this case, the whole received character (8-bit) is compared to the ADD[7:0] + * value and CMF flag is set on match) + * @rmtoll CR2 ADD LL_USART_ConfigNodeAddress\n + * CR2 ADDM7 LL_USART_ConfigNodeAddress + * @param USARTx USART Instance + * @param AddressLen This parameter can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + * @param NodeAddress 4 or 7 bit Address of the USART node. + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigNodeAddress(USART_TypeDef *USARTx, uint32_t AddressLen, uint32_t NodeAddress) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_ADD | USART_CR2_ADDM7, + (uint32_t)(AddressLen | (NodeAddress << USART_CR2_ADD_Pos))); +} + +/** + * @brief Return 8 bit Address of the USART node as set in ADD field of CR2. + * @note If 4-bit Address Detection is selected in ADDM7, + * only 4bits (b3-b0) of returned value are relevant (b31-b4 are not relevant) + * If 7-bit Address Detection is selected in ADDM7, + * only 8bits (b7-b0) of returned value are relevant (b31-b8 are not relevant) + * @rmtoll CR2 ADD LL_USART_GetNodeAddress + * @param USARTx USART Instance + * @retval Address of the USART node (Value between Min_Data=0 and Max_Data=255) + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddress(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADD) >> USART_CR2_ADD_Pos); +} + +/** + * @brief Return Length of Node Address used in Address Detection mode (7-bit or 4-bit) + * @rmtoll CR2 ADDM7 LL_USART_GetNodeAddressLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_ADDRESS_DETECT_4B + * @arg @ref LL_USART_ADDRESS_DETECT_7B + */ +__STATIC_INLINE uint32_t LL_USART_GetNodeAddressLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_ADDM7)); +} + +/** + * @brief Enable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_EnableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Disable RTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_DisableRTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableRTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_RTSE); +} + +/** + * @brief Enable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_EnableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Disable CTS HW Flow Control + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSE LL_USART_DisableCTSHWFlowCtrl + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableCTSHWFlowCtrl(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_CTSE); +} + +/** + * @brief Configure HW Flow Control mode (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_SetHWFlowCtrl\n + * CR3 CTSE LL_USART_SetHWFlowCtrl + * @param USARTx USART Instance + * @param HardwareFlowControl This parameter can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + * @retval None + */ +__STATIC_INLINE void LL_USART_SetHWFlowCtrl(USART_TypeDef *USARTx, uint32_t HardwareFlowControl) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE, HardwareFlowControl); +} + +/** + * @brief Return HW Flow Control configuration (both CTS and RTS) + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 RTSE LL_USART_GetHWFlowCtrl\n + * CR3 CTSE LL_USART_GetHWFlowCtrl + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_HWCONTROL_NONE + * @arg @ref LL_USART_HWCONTROL_RTS + * @arg @ref LL_USART_HWCONTROL_CTS + * @arg @ref LL_USART_HWCONTROL_RTS_CTS + */ +__STATIC_INLINE uint32_t LL_USART_GetHWFlowCtrl(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_RTSE | USART_CR3_CTSE)); +} + +/** + * @brief Enable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_EnableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOneBitSamp(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Disable One bit sampling method + * @rmtoll CR3 ONEBIT LL_USART_DisableOneBitSamp + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOneBitSamp(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_ONEBIT); +} + +/** + * @brief Indicate if One bit sampling method is enabled + * @rmtoll CR3 ONEBIT LL_USART_IsEnabledOneBitSamp + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOneBitSamp(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_ONEBIT) == (USART_CR3_ONEBIT)) ? 1UL : 0UL); +} + +/** + * @brief Enable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_EnableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableOverrunDetect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Disable Overrun detection + * @rmtoll CR3 OVRDIS LL_USART_DisableOverrunDetect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableOverrunDetect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_OVRDIS); +} + +/** + * @brief Indicate if Overrun detection is enabled + * @rmtoll CR3 OVRDIS LL_USART_IsEnabledOverrunDetect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledOverrunDetect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_OVRDIS) != USART_CR3_OVRDIS) ? 1UL : 0UL); +} + +/** + * @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_SetWKUPType + * @param USARTx USART Instance + * @param Type This parameter can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + * @retval None + */ +__STATIC_INLINE void LL_USART_SetWKUPType(USART_TypeDef *USARTx, uint32_t Type) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_WUS, Type); +} + +/** + * @brief Return event type for Wake UP Interrupt Flag (WUS[1:0] bits) + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUS LL_USART_GetWKUPType + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_WAKEUP_ON_ADDRESS + * @arg @ref LL_USART_WAKEUP_ON_STARTBIT + * @arg @ref LL_USART_WAKEUP_ON_RXNE + */ +__STATIC_INLINE uint32_t LL_USART_GetWKUPType(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_WUS)); +} + +/** + * @brief Configure USART BRR register for achieving expected Baud Rate value. + * @note Compute and set USARTDIV value in BRR Register (full BRR content) + * according to used Peripheral Clock, Oversampling mode, and expected Baud Rate values + * @note Peripheral clock and Baud rate values provided as function parameters should be valid + * (Baud rate value != 0) + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_SetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @param BaudRate Baud Rate + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBaudRate(USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling, + uint32_t BaudRate) +{ + uint32_t usartdiv; + uint32_t brrtemp; + + if (PrescalerValue > LL_USART_PRESCALER_DIV256) + { + /* Do not overstep the size of USART_PRESCALER_TAB */ + } + else if (BaudRate == 0U) + { + /* Can Not divide per 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + brrtemp = usartdiv & 0xFFF0U; + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + USARTx->BRR = brrtemp; + } + else + { + USARTx->BRR = (uint16_t)(__LL_USART_DIV_SAMPLING16(PeriphClk, (uint8_t)PrescalerValue, BaudRate)); + } +} + +/** + * @brief Return current Baud Rate value, according to USARTDIV present in BRR register + * (full BRR content), and to used Peripheral Clock and Oversampling mode values + * @note In case of non-initialized or invalid value stored in BRR register, value 0 will be returned. + * @note In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. + * @rmtoll BRR BRR LL_USART_GetBaudRate + * @param USARTx USART Instance + * @param PeriphClk Peripheral Clock + * @param PrescalerValue This parameter can be one of the following values: + * @arg @ref LL_USART_PRESCALER_DIV1 + * @arg @ref LL_USART_PRESCALER_DIV2 + * @arg @ref LL_USART_PRESCALER_DIV4 + * @arg @ref LL_USART_PRESCALER_DIV6 + * @arg @ref LL_USART_PRESCALER_DIV8 + * @arg @ref LL_USART_PRESCALER_DIV10 + * @arg @ref LL_USART_PRESCALER_DIV12 + * @arg @ref LL_USART_PRESCALER_DIV16 + * @arg @ref LL_USART_PRESCALER_DIV32 + * @arg @ref LL_USART_PRESCALER_DIV64 + * @arg @ref LL_USART_PRESCALER_DIV128 + * @arg @ref LL_USART_PRESCALER_DIV256 + * @param OverSampling This parameter can be one of the following values: + * @arg @ref LL_USART_OVERSAMPLING_16 + * @arg @ref LL_USART_OVERSAMPLING_8 + * @retval Baud Rate + */ +__STATIC_INLINE uint32_t LL_USART_GetBaudRate(const USART_TypeDef *USARTx, uint32_t PeriphClk, uint32_t PrescalerValue, + uint32_t OverSampling) +{ + uint32_t usartdiv; + uint32_t brrresult = 0x0U; + uint32_t periphclkpresc = (uint32_t)(PeriphClk / (USART_PRESCALER_TAB[(uint8_t)PrescalerValue])); + + usartdiv = USARTx->BRR; + + if (usartdiv == 0U) + { + /* Do not perform a division by 0 */ + } + else if (OverSampling == LL_USART_OVERSAMPLING_8) + { + usartdiv = (uint16_t)((usartdiv & 0xFFF0U) | ((usartdiv & 0x0007U) << 1U)) ; + if (usartdiv != 0U) + { + brrresult = (periphclkpresc * 2U) / usartdiv; + } + } + else + { + if ((usartdiv & 0xFFFFU) != 0U) + { + brrresult = periphclkpresc / usartdiv; + } + } + return (brrresult); +} + +/** + * @brief Set Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_SetRxTimeout + * @param USARTx USART Instance + * @param Timeout Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetRxTimeout(USART_TypeDef *USARTx, uint32_t Timeout) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_RTO, Timeout); +} + +/** + * @brief Get Receiver Time Out Value (expressed in nb of bits duration) + * @rmtoll RTOR RTO LL_USART_GetRxTimeout + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x00FFFFFF + */ +__STATIC_INLINE uint32_t LL_USART_GetRxTimeout(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_RTO)); +} + +/** + * @brief Set Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_SetBlockLength + * @param USARTx USART Instance + * @param BlockLength Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetBlockLength(USART_TypeDef *USARTx, uint32_t BlockLength) +{ + MODIFY_REG(USARTx->RTOR, USART_RTOR_BLEN, BlockLength << USART_RTOR_BLEN_Pos); +} + +/** + * @brief Get Block Length value in reception + * @rmtoll RTOR BLEN LL_USART_GetBlockLength + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint32_t LL_USART_GetBlockLength(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->RTOR, USART_RTOR_BLEN) >> USART_RTOR_BLEN_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_IRDA Configuration functions related to Irda feature + * @{ + */ + +/** + * @brief Enable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_EnableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIrda(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Disable IrDA mode + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_DisableIrda + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIrda(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Indicate if IrDA mode is enabled + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IREN LL_USART_IsEnabledIrda + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIrda(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_IREN) == (USART_CR3_IREN)) ? 1UL : 0UL); +} + +/** + * @brief Configure IrDA Power Mode (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_SetIrdaPowerMode + * @param USARTx USART Instance + * @param PowerMode This parameter can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_IRDA_POWER_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPowerMode(USART_TypeDef *USARTx, uint32_t PowerMode) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_IRLP, PowerMode); +} + +/** + * @brief Retrieve IrDA Power Mode configuration (Normal or Low Power) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll CR3 IRLP LL_USART_GetIrdaPowerMode + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_IRDA_POWER_NORMAL + * @arg @ref LL_USART_PHASE_2EDGE + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_IRLP)); +} + +/** + * @brief Set Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetIrdaPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Irda prescaler value, used for dividing the USART clock source + * to achieve the Irda Low Power frequency (8 bits value) + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetIrdaPrescaler + * @param USARTx USART Instance + * @retval Irda prescaler value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetIrdaPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_Smartcard Configuration functions related to Smartcard feature + * @{ + */ + +/** + * @brief Enable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_EnableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcardNACK(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Disable Smartcard NACK transmission + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_DisableSmartcardNACK + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcardNACK(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_NACK); +} + +/** + * @brief Indicate if Smartcard NACK transmission is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 NACK LL_USART_IsEnabledSmartcardNACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcardNACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_NACK) == (USART_CR3_NACK)) ? 1UL : 0UL); +} + +/** + * @brief Enable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_EnableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSmartcard(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Disable Smartcard mode + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_DisableSmartcard + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSmartcard(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Indicate if Smartcard mode is enabled + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCEN LL_USART_IsEnabledSmartcard + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSmartcard(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_SCEN) == (USART_CR3_SCEN)) ? 1UL : 0UL); +} + +/** + * @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note This bit-field specifies the number of retries in transmit and receive, in Smartcard mode. + * In transmission mode, it specifies the number of automatic retransmission retries, before + * generating a transmission error (FE bit set). + * In reception mode, it specifies the number or erroneous reception trials, before generating a + * reception error (RXNE and PE bits set) + * @rmtoll CR3 SCARCNT LL_USART_SetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @param AutoRetryCount Value between Min_Data=0 and Max_Data=7 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardAutoRetryCount(USART_TypeDef *USARTx, uint32_t AutoRetryCount) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_SCARCNT, AutoRetryCount << USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Return Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 SCARCNT LL_USART_GetSmartcardAutoRetryCount + * @param USARTx USART Instance + * @retval Smartcard Auto-Retry Count value (Value between Min_Data=0 and Max_Data=7) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_SCARCNT) >> USART_CR3_SCARCNT_Pos); +} + +/** + * @brief Set Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_SetSmartcardPrescaler + * @param USARTx USART Instance + * @param PrescalerValue Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue); +} + +/** + * @brief Return Smartcard prescaler value, used for dividing the USART clock + * source to provide the SMARTCARD Clock (5 bits value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR PSC LL_USART_GetSmartcardPrescaler + * @param USARTx USART Instance + * @retval Smartcard prescaler value (Value between Min_Data=0 and Max_Data=31) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_PSC)); +} + +/** + * @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_SetSmartcardGuardTime + * @param USARTx USART Instance + * @param GuardTime Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime) +{ + MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos)); +} + +/** + * @brief Return Smartcard Guard time value, expressed in nb of baud clocks periods + * (GT[7:0] bits : Guard time value) + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll GTPR GT LL_USART_GetSmartcardGuardTime + * @param USARTx USART Instance + * @retval Smartcard Guard time value (Value between Min_Data=0x00 and Max_Data=0xFF) + */ +__STATIC_INLINE uint32_t LL_USART_GetSmartcardGuardTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->GTPR, USART_GTPR_GT) >> USART_GTPR_GT_Pos); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_HalfDuplex Configuration functions related to Half Duplex feature + * @{ + */ + +/** + * @brief Enable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_EnableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableHalfDuplex(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Disable Single Wire Half-Duplex mode + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_DisableHalfDuplex + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableHalfDuplex(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Indicate if Single Wire Half-Duplex mode is enabled + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @rmtoll CR3 HDSEL LL_USART_IsEnabledHalfDuplex + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledHalfDuplex(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_HDSEL) == (USART_CR3_HDSEL)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_SPI_SLAVE Configuration functions related to SPI Slave feature + * @{ + */ +/** + * @brief Enable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_EnableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlave(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Disable SPI Synchronous Slave mode + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_DisableSPISlave + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlave(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_SLVEN); +} + +/** + * @brief Indicate if SPI Synchronous Slave mode is enabled + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 SLVEN LL_USART_IsEnabledSPISlave + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlave(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_SLVEN) == (USART_CR2_SLVEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave Selection depends on NSS input pin + * (The slave is selected when NSS is low and deselected when NSS is high). + * @rmtoll CR2 DIS_NSS LL_USART_EnableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableSPISlaveSelect(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Disable SPI Slave Selection using NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @note SPI Slave will be always selected and NSS input pin will be ignored. + * @rmtoll CR2 DIS_NSS LL_USART_DisableSPISlaveSelect + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableSPISlaveSelect(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_DIS_NSS); +} + +/** + * @brief Indicate if SPI Slave Selection depends on NSS input pin + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll CR2 DIS_NSS LL_USART_IsEnabledSPISlaveSelect + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledSPISlaveSelect(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_DIS_NSS) != (USART_CR2_DIS_NSS)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_LIN Configuration functions related to LIN feature + * @{ + */ + +/** + * @brief Set LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_SetLINBrkDetectionLen + * @param USARTx USART Instance + * @param LINBDLength This parameter can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + * @retval None + */ +__STATIC_INLINE void LL_USART_SetLINBrkDetectionLen(USART_TypeDef *USARTx, uint32_t LINBDLength) +{ + MODIFY_REG(USARTx->CR2, USART_CR2_LBDL, LINBDLength); +} + +/** + * @brief Return LIN Break Detection Length + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDL LL_USART_GetLINBrkDetectionLen + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_LINBREAK_DETECT_10B + * @arg @ref LL_USART_LINBREAK_DETECT_11B + */ +__STATIC_INLINE uint32_t LL_USART_GetLINBrkDetectionLen(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR2, USART_CR2_LBDL)); +} + +/** + * @brief Enable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_EnableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableLIN(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Disable LIN mode + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_DisableLIN + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableLIN(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Indicate if LIN mode is enabled + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LINEN LL_USART_IsEnabledLIN + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledLIN(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LINEN) == (USART_CR2_LINEN)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Configuration_DE Configuration functions related to Driver Enable feature + * @{ + */ + +/** + * @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_SetDEDeassertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEDeassertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEDT, Time << USART_CR1_DEDT_Pos); +} + +/** + * @brief Return DEDT (Driver Enable De-Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEDT LL_USART_GetDEDeassertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEDeassertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEDT) >> USART_CR1_DEDT_Pos); +} + +/** + * @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_SetDEAssertionTime + * @param USARTx USART Instance + * @param Time Value between Min_Data=0 and Max_Data=31 + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDEAssertionTime(USART_TypeDef *USARTx, uint32_t Time) +{ + MODIFY_REG(USARTx->CR1, USART_CR1_DEAT, Time << USART_CR1_DEAT_Pos); +} + +/** + * @brief Return DEAT (Driver Enable Assertion Time) + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR1 DEAT LL_USART_GetDEAssertionTime + * @param USARTx USART Instance + * @retval Time value expressed on 5 bits ([4:0] bits) : Value between Min_Data=0 and Max_Data=31 + */ +__STATIC_INLINE uint32_t LL_USART_GetDEAssertionTime(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR1, USART_CR1_DEAT) >> USART_CR1_DEAT_Pos); +} + +/** + * @brief Enable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_EnableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDEMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Disable Driver Enable (DE) Mode + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_DisableDEMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDEMode(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DEM); +} + +/** + * @brief Indicate if Driver Enable (DE) Mode is enabled + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEM LL_USART_IsEnabledDEMode + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDEMode(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DEM) == (USART_CR3_DEM)) ? 1UL : 0UL); +} + +/** + * @brief Select Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_SetDESignalPolarity + * @param USARTx USART Instance + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_USART_SetDESignalPolarity(USART_TypeDef *USARTx, uint32_t Polarity) +{ + MODIFY_REG(USARTx->CR3, USART_CR3_DEP, Polarity); +} + +/** + * @brief Return Driver Enable Polarity + * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not + * Driver Enable feature is supported by the USARTx instance. + * @rmtoll CR3 DEP LL_USART_GetDESignalPolarity + * @param USARTx USART Instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_USART_DE_POLARITY_HIGH + * @arg @ref LL_USART_DE_POLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_USART_GetDESignalPolarity(const USART_TypeDef *USARTx) +{ + return (uint32_t)(READ_BIT(USARTx->CR3, USART_CR3_DEP)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_AdvancedConfiguration Advanced Configurations services + * @{ + */ + +/** + * @brief Perform basic configuration of USART for enabling use in Asynchronous Mode (UART) + * @note In UART mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Asynchronous Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigAsyncMode\n + * CR2 CLKEN LL_USART_ConfigAsyncMode\n + * CR3 SCEN LL_USART_ConfigAsyncMode\n + * CR3 IREN LL_USART_ConfigAsyncMode\n + * CR3 HDSEL LL_USART_ConfigAsyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigAsyncMode(USART_TypeDef *USARTx) +{ + /* In Asynchronous mode, the following bits must be kept cleared: + - LINEN, CLKEN bits in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Synchronous Mode + * @note In Synchronous mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the USART in Synchronous mode. + * @note Macro IS_USART_INSTANCE(USARTx) can be used to check whether or not + * Synchronous mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * @note Other remaining configurations items related to Synchronous Mode + * (as Baud Rate, Word length, Parity, Clock Polarity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSyncMode\n + * CR2 CLKEN LL_USART_ConfigSyncMode\n + * CR3 SCEN LL_USART_ConfigSyncMode\n + * CR3 IREN LL_USART_ConfigSyncMode\n + * CR3 HDSEL LL_USART_ConfigSyncMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSyncMode(USART_TypeDef *USARTx) +{ + /* In Synchronous mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - SCEN, IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL)); + /* set the UART/USART in Synchronous mode */ + SET_BIT(USARTx->CR2, USART_CR2_CLKEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in LIN Mode + * @note In LIN mode, the following bits must be kept cleared: + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also set the UART/USART in LIN mode. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Set LINEN in CR2 using @ref LL_USART_EnableLIN() function + * @note Other remaining configurations items related to LIN Mode + * (as Baud Rate, Word length, LIN Break Detection Length, ...) should be set using + * dedicated functions + * @rmtoll CR2 CLKEN LL_USART_ConfigLINMode\n + * CR2 STOP LL_USART_ConfigLINMode\n + * CR2 LINEN LL_USART_ConfigLINMode\n + * CR3 IREN LL_USART_ConfigLINMode\n + * CR3 SCEN LL_USART_ConfigLINMode\n + * CR3 HDSEL LL_USART_ConfigLINMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigLINMode(USART_TypeDef *USARTx) +{ + /* In LIN mode, the following bits must be kept cleared: + - STOP and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL)); + /* Set the UART/USART in LIN mode */ + SET_BIT(USARTx->CR2, USART_CR2_LINEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Half Duplex Mode + * @note In Half Duplex mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * This function also sets the UART/USART in Half Duplex mode. + * @note Macro IS_UART_HALFDUPLEX_INSTANCE(USARTx) can be used to check whether or not + * Half-Duplex mode is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Set HDSEL in CR3 using @ref LL_USART_EnableHalfDuplex() function + * @note Other remaining configurations items related to Half Duplex Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigHalfDuplexMode\n + * CR2 CLKEN LL_USART_ConfigHalfDuplexMode\n + * CR3 HDSEL LL_USART_ConfigHalfDuplexMode\n + * CR3 SCEN LL_USART_ConfigHalfDuplexMode\n + * CR3 IREN LL_USART_ConfigHalfDuplexMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigHalfDuplexMode(USART_TypeDef *USARTx) +{ + /* In Half Duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN)); + /* set the UART/USART in Half Duplex mode */ + SET_BIT(USARTx->CR3, USART_CR3_HDSEL); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Smartcard Mode + * @note In Smartcard mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also configures Stop bits to 1.5 bits and + * sets the USART in Smartcard mode (SCEN bit). + * Clock Output is also enabled (CLKEN). + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set CLKEN in CR2 using @ref LL_USART_EnableSCLKOutput() function + * - Set SCEN in CR3 using @ref LL_USART_EnableSmartcard() function + * @note Other remaining configurations items related to Smartcard Mode + * (as Baud Rate, Word length, Parity, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigSmartcardMode\n + * CR2 STOP LL_USART_ConfigSmartcardMode\n + * CR2 CLKEN LL_USART_ConfigSmartcardMode\n + * CR3 HDSEL LL_USART_ConfigSmartcardMode\n + * CR3 SCEN LL_USART_ConfigSmartcardMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigSmartcardMode(USART_TypeDef *USARTx) +{ + /* In Smartcard mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register, + - IREN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL)); + /* Configure Stop bits to 1.5 bits */ + /* Synchronous mode is activated by default */ + SET_BIT(USARTx->CR2, (USART_CR2_STOP_0 | USART_CR2_STOP_1 | USART_CR2_CLKEN)); + /* set the UART/USART in Smartcard mode */ + SET_BIT(USARTx->CR3, USART_CR3_SCEN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Irda Mode + * @note In IRDA mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - STOP and CLKEN bits in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * This function also sets the UART/USART in IRDA mode (IREN bit). + * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not + * IrDA feature is supported by the USARTx instance. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * - Configure STOP in CR2 using @ref LL_USART_SetStopBitsLength() function + * - Set IREN in CR3 using @ref LL_USART_EnableIrda() function + * @note Other remaining configurations items related to Irda Mode + * (as Baud Rate, Word length, Power mode, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigIrdaMode\n + * CR2 CLKEN LL_USART_ConfigIrdaMode\n + * CR2 STOP LL_USART_ConfigIrdaMode\n + * CR3 SCEN LL_USART_ConfigIrdaMode\n + * CR3 HDSEL LL_USART_ConfigIrdaMode\n + * CR3 IREN LL_USART_ConfigIrdaMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigIrdaMode(USART_TypeDef *USARTx) +{ + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + /* set the UART/USART in IRDA mode */ + SET_BIT(USARTx->CR3, USART_CR3_IREN); +} + +/** + * @brief Perform basic configuration of USART for enabling use in Multi processor Mode + * (several USARTs connected in a network, one of the USARTs can be the master, + * its TX output connected to the RX inputs of the other slaves USARTs). + * @note In MultiProcessor mode, the following bits must be kept cleared: + * - LINEN bit in the USART_CR2 register, + * - CLKEN bit in the USART_CR2 register, + * - SCEN bit in the USART_CR3 register, + * - IREN bit in the USART_CR3 register, + * - HDSEL bit in the USART_CR3 register. + * @note Call of this function is equivalent to following function call sequence : + * - Clear LINEN in CR2 using @ref LL_USART_DisableLIN() function + * - Clear CLKEN in CR2 using @ref LL_USART_DisableSCLKOutput() function + * - Clear SCEN in CR3 using @ref LL_USART_DisableSmartcard() function + * - Clear IREN in CR3 using @ref LL_USART_DisableIrda() function + * - Clear HDSEL in CR3 using @ref LL_USART_DisableHalfDuplex() function + * @note Other remaining configurations items related to Multi processor Mode + * (as Baud Rate, Wake Up Method, Node address, ...) should be set using + * dedicated functions + * @rmtoll CR2 LINEN LL_USART_ConfigMultiProcessMode\n + * CR2 CLKEN LL_USART_ConfigMultiProcessMode\n + * CR3 SCEN LL_USART_ConfigMultiProcessMode\n + * CR3 HDSEL LL_USART_ConfigMultiProcessMode\n + * CR3 IREN LL_USART_ConfigMultiProcessMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ConfigMultiProcessMode(USART_TypeDef *USARTx) +{ + /* In Multi Processor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - IREN, SCEN and HDSEL bits in the USART_CR3 register. + */ + CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_FLAG_Management FLAG_Management + * @{ + */ + +/** + * @brief Check if the USART Parity Error Flag is set or not + * @rmtoll ISR PE LL_USART_IsActiveFlag_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_PE) == (USART_ISR_PE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Framing Error Flag is set or not + * @rmtoll ISR FE LL_USART_IsActiveFlag_FE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_FE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_FE) == (USART_ISR_FE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Noise error detected Flag is set or not + * @rmtoll ISR NE LL_USART_IsActiveFlag_NE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_NE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_NE) == (USART_ISR_NE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART OverRun Error Flag is set or not + * @rmtoll ISR ORE LL_USART_IsActiveFlag_ORE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ORE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ORE) == (USART_ISR_ORE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART IDLE line detected Flag is set or not + * @rmtoll ISR IDLE LL_USART_IsActiveFlag_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_IDLE) == (USART_ISR_IDLE)) ? 1UL : 0UL); +} + +#define LL_USART_IsActiveFlag_RXNE LL_USART_IsActiveFlag_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART Read Data Register or USART RX FIFO Not Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXNE_RXFNE LL_USART_IsActiveFlag_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXNE_RXFNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXNE_RXFNE) == (USART_ISR_RXNE_RXFNE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Flag is set or not + * @rmtoll ISR TC LL_USART_IsActiveFlag_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TC) == (USART_ISR_TC)) ? 1UL : 0UL); +} + +#define LL_USART_IsActiveFlag_TXE LL_USART_IsActiveFlag_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART Transmit Data Register Empty or USART TX FIFO Not Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXE_TXFNF LL_USART_IsActiveFlag_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXE_TXFNF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXE_TXFNF) == (USART_ISR_TXE_TXFNF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Flag is set or not + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ISR LBDF LL_USART_IsActiveFlag_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_LBDF) == (USART_ISR_LBDF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS interrupt Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTSIF LL_USART_IsActiveFlag_nCTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_nCTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTSIF) == (USART_ISR_CTSIF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Flag is set or not + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ISR CTS LL_USART_IsActiveFlag_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CTS) == (USART_ISR_CTS)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Time Out Flag is set or not + * @rmtoll ISR RTOF LL_USART_IsActiveFlag_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RTOF) == (USART_ISR_RTOF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Flag is set or not + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ISR EOBF LL_USART_IsActiveFlag_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_EOBF) == (USART_ISR_EOBF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the SPI Slave Underrun error flag is set or not + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ISR UDR LL_USART_IsActiveFlag_UDR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_UDR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_UDR) == (USART_ISR_UDR)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Error Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRE LL_USART_IsActiveFlag_ABRE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABRE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRE) == (USART_ISR_ABRE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Auto-Baud Rate Flag is set or not + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll ISR ABRF LL_USART_IsActiveFlag_ABR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_ABR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_ABRF) == (USART_ISR_ABRF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Busy Flag is set or not + * @rmtoll ISR BUSY LL_USART_IsActiveFlag_BUSY + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_BUSY(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_BUSY) == (USART_ISR_BUSY)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Flag is set or not + * @rmtoll ISR CMF LL_USART_IsActiveFlag_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_CMF) == (USART_ISR_CMF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Send Break Flag is set or not + * @rmtoll ISR SBKF LL_USART_IsActiveFlag_SBK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_SBK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_SBKF) == (USART_ISR_SBKF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Wake Up from mute mode Flag is set or not + * @rmtoll ISR RWU LL_USART_IsActiveFlag_RWU + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RWU(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RWU) == (USART_ISR_RWU)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from stop mode Flag is set or not + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ISR WUF LL_USART_IsActiveFlag_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_WUF) == (USART_ISR_WUF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmit Enable Acknowledge Flag is set or not + * @rmtoll ISR TEACK LL_USART_IsActiveFlag_TEACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TEACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TEACK) == (USART_ISR_TEACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receive Enable Acknowledge Flag is set or not + * @rmtoll ISR REACK LL_USART_IsActiveFlag_REACK + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_REACK(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_REACK) == (USART_ISR_REACK)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFE LL_USART_IsActiveFlag_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFE) == (USART_ISR_TXFE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFF LL_USART_IsActiveFlag_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFF) == (USART_ISR_RXFF)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Flag is set or not + * @rmtoll ISR TCBGT LL_USART_IsActiveFlag_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TCBGT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TCBGT) == (USART_ISR_TCBGT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR TXFT LL_USART_IsActiveFlag_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_TXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_TXFT) == (USART_ISR_TXFT)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Threshold Flag is set or not + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ISR RXFT LL_USART_IsActiveFlag_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsActiveFlag_RXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->ISR, USART_ISR_RXFT) == (USART_ISR_RXFT)) ? 1UL : 0UL); +} + +/** + * @brief Clear Parity Error Flag + * @rmtoll ICR PECF LL_USART_ClearFlag_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_PE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_PECF); +} + +/** + * @brief Clear Framing Error Flag + * @rmtoll ICR FECF LL_USART_ClearFlag_FE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_FE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_FECF); +} + +/** + * @brief Clear Noise Error detected Flag + * @rmtoll ICR NECF LL_USART_ClearFlag_NE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_NE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_NECF); +} + +/** + * @brief Clear OverRun Error Flag + * @rmtoll ICR ORECF LL_USART_ClearFlag_ORE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_ORE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_ORECF); +} + +/** + * @brief Clear IDLE line detected Flag + * @rmtoll ICR IDLECF LL_USART_ClearFlag_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_IDLE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_IDLECF); +} + +/** + * @brief Clear TX FIFO Empty Flag + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll ICR TXFECF LL_USART_ClearFlag_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TXFE(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TXFECF); +} + +/** + * @brief Clear Transmission Complete Flag + * @rmtoll ICR TCCF LL_USART_ClearFlag_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TC(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCCF); +} + +/** + * @brief Clear Smartcard Transmission Complete Before Guard Time Flag + * @rmtoll ICR TCBGTCF LL_USART_ClearFlag_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_TCBGT(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_TCBGTCF); +} + +/** + * @brief Clear LIN Break Detection Flag + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll ICR LBDCF LL_USART_ClearFlag_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_LBD(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_LBDCF); +} + +/** + * @brief Clear CTS Interrupt Flag + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll ICR CTSCF LL_USART_ClearFlag_nCTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_nCTS(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CTSCF); +} + +/** + * @brief Clear Receiver Time Out Flag + * @rmtoll ICR RTOCF LL_USART_ClearFlag_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_RTO(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_RTOCF); +} + +/** + * @brief Clear End Of Block Flag + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll ICR EOBCF LL_USART_ClearFlag_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_EOB(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_EOBCF); +} + +/** + * @brief Clear SPI Slave Underrun Flag + * @note Macro IS_UART_SPI_SLAVE_INSTANCE(USARTx) can be used to check whether or not + * SPI Slave mode feature is supported by the USARTx instance. + * @rmtoll ICR UDRCF LL_USART_ClearFlag_UDR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_UDR(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_UDRCF); +} + +/** + * @brief Clear Character Match Flag + * @rmtoll ICR CMCF LL_USART_ClearFlag_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_CM(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_CMCF); +} + +/** + * @brief Clear Wake Up from stop mode Flag + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll ICR WUCF LL_USART_ClearFlag_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx) +{ + WRITE_REG(USARTx->ICR, USART_ICR_WUCF); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_IT_Management IT_Management + * @{ + */ + +/** + * @brief Enable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_EnableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_USART_EnableIT_RXNE LL_USART_EnableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Enable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_EnableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Enable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_EnableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +#define LL_USART_EnableIT_TXE LL_USART_EnableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Enable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_EnableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Enable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_EnableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Enable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_EnableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Enable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_EnableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Enable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_EnableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Enable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_EnableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Enable RX FIFO Full Interrupt + * @rmtoll CR1 RXFFIE LL_USART_EnableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Enable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_EnableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Enable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_EnableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Enable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_EnableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Enable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_EnableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Enable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_EnableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Enable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_EnableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Enable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_EnableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Disable IDLE Interrupt + * @rmtoll CR1 IDLEIE LL_USART_DisableIT_IDLE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE); +} + +#define LL_USART_DisableIT_RXNE LL_USART_DisableIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Disable RX Not Empty and RX FIFO Not Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_DisableIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXNE_RXFNE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE); +} + +/** + * @brief Disable Transmission Complete Interrupt + * @rmtoll CR1 TCIE LL_USART_DisableIT_TC + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE); +} + +#define LL_USART_DisableIT_TXE LL_USART_DisableIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Disable TX Empty and TX FIFO Not Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_DisableIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXE_TXFNF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE); +} + +/** + * @brief Disable Parity Error Interrupt + * @rmtoll CR1 PEIE LL_USART_DisableIT_PE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE); +} + +/** + * @brief Disable Character Match Interrupt + * @rmtoll CR1 CMIE LL_USART_DisableIT_CM + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE); +} + +/** + * @brief Disable Receiver Timeout Interrupt + * @rmtoll CR1 RTOIE LL_USART_DisableIT_RTO + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE); +} + +/** + * @brief Disable End Of Block Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_DisableIT_EOB + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE); +} + +/** + * @brief Disable TX FIFO Empty Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_DisableIT_TXFE + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFE(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE); +} + +/** + * @brief Disable RX FIFO Full Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_DisableIT_RXFF + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFF(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE); +} + +/** + * @brief Disable LIN Break Detection Interrupt + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_DisableIT_LBD + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR2, USART_CR2_LBDIE); +} + +/** + * @brief Disable Error Interrupt + * @note When set, Error Interrupt Enable Bit is enabling interrupt generation in case of a framing + * error, overrun error or noise flag (FE=1 or ORE=1 or NF=1 in the USARTx_ISR register). + * 0: Interrupt is inhibited + * 1: An interrupt is generated when FE=1 or ORE=1 or NF=1 in the USARTx_ISR register. + * @rmtoll CR3 EIE LL_USART_DisableIT_ERROR + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE); +} + +/** + * @brief Disable CTS Interrupt + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_DisableIT_CTS + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE); +} + +/** + * @brief Disable Wake Up from Stop Mode Interrupt + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_DisableIT_WKUP + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE); +} + +/** + * @brief Disable TX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_DisableIT_TXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE); +} + +/** + * @brief Disable Smartcard Transmission Complete Before Guard Time Interrupt + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_DisableIT_TCBGT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE); +} + +/** + * @brief Disable RX FIFO Threshold Interrupt + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_DisableIT_RXFT + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableIT_RXFT(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE); +} + +/** + * @brief Check if the USART IDLE Interrupt source is enabled or disabled. + * @rmtoll CR1 IDLEIE LL_USART_IsEnabledIT_IDLE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_IDLE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_IDLEIE) == (USART_CR1_IDLEIE)) ? 1UL : 0UL); +} + +#define LL_USART_IsEnabledIT_RXNE LL_USART_IsEnabledIT_RXNE_RXFNE /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART RX Not Empty and USART RX FIFO Not Empty Interrupt is enabled or disabled. + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXNEIE_RXFNEIE LL_USART_IsEnabledIT_RXNE_RXFNE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXNE_RXFNE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE) == (USART_CR1_RXNEIE_RXFNEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Transmission Complete Interrupt is enabled or disabled. + * @rmtoll CR1 TCIE LL_USART_IsEnabledIT_TC + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TC(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TCIE) == (USART_CR1_TCIE)) ? 1UL : 0UL); +} + +#define LL_USART_IsEnabledIT_TXE LL_USART_IsEnabledIT_TXE_TXFNF /* Redefinition for legacy purpose */ + +/** + * @brief Check if the USART TX Empty and USART TX FIFO Not Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXEIE_TXFNFIE LL_USART_IsEnabledIT_TXE_TXFNF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXE_TXFNF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE) == (USART_CR1_TXEIE_TXFNFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Parity Error Interrupt is enabled or disabled. + * @rmtoll CR1 PEIE LL_USART_IsEnabledIT_PE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_PE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_PEIE) == (USART_CR1_PEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Character Match Interrupt is enabled or disabled. + * @rmtoll CR1 CMIE LL_USART_IsEnabledIT_CM + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CM(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_CMIE) == (USART_CR1_CMIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Receiver Timeout Interrupt is enabled or disabled. + * @rmtoll CR1 RTOIE LL_USART_IsEnabledIT_RTO + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RTO(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RTOIE) == (USART_CR1_RTOIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART End Of Block Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR1 EOBIE LL_USART_IsEnabledIT_EOB + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_EOB(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_EOBIE) == (USART_CR1_EOBIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART TX FIFO Empty Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 TXFEIE LL_USART_IsEnabledIT_TXFE + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFE(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_TXFEIE) == (USART_CR1_TXFEIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART RX FIFO Full Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR1 RXFFIE LL_USART_IsEnabledIT_RXFF + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFF(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR1, USART_CR1_RXFFIE) == (USART_CR1_RXFFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART LIN Break Detection Interrupt is enabled or disabled. + * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not + * LIN feature is supported by the USARTx instance. + * @rmtoll CR2 LBDIE LL_USART_IsEnabledIT_LBD + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_LBD(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR2, USART_CR2_LBDIE) == (USART_CR2_LBDIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Error Interrupt is enabled or disabled. + * @rmtoll CR3 EIE LL_USART_IsEnabledIT_ERROR + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_ERROR(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_EIE) == (USART_CR3_EIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART CTS Interrupt is enabled or disabled. + * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not + * Hardware Flow control feature is supported by the USARTx instance. + * @rmtoll CR3 CTSIE LL_USART_IsEnabledIT_CTS + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_CTS(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_CTSIE) == (USART_CR3_CTSIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the USART Wake Up from Stop Mode Interrupt is enabled or disabled. + * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check whether or not + * Wake-up from Stop mode feature is supported by the USARTx instance. + * @rmtoll CR3 WUFIE LL_USART_IsEnabledIT_WKUP + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_WKUP(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_WUFIE) == (USART_CR3_WUFIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART TX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 TXFTIE LL_USART_IsEnabledIT_TXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TXFTIE) == (USART_CR3_TXFTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if the Smartcard Transmission Complete Before Guard Time Interrupt is enabled or disabled. + * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not + * Smartcard feature is supported by the USARTx instance. + * @rmtoll CR3 TCBGTIE LL_USART_IsEnabledIT_TCBGT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_TCBGT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_TCBGTIE) == (USART_CR3_TCBGTIE)) ? 1UL : 0UL); +} + +/** + * @brief Check if USART RX FIFO Threshold Interrupt is enabled or disabled + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll CR3 RXFTIE LL_USART_IsEnabledIT_RXFT + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFT(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_RXFTIE) == (USART_CR3_RXFTIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_DMA_Management DMA_Management + * @{ + */ + +/** + * @brief Enable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_EnableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Disable DMA Mode for reception + * @rmtoll CR3 DMAR LL_USART_DisableDMAReq_RX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR); +} + +/** + * @brief Check if DMA Mode is enabled for reception + * @rmtoll CR3 DMAR LL_USART_IsEnabledDMAReq_RX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAR) == (USART_CR3_DMAR)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_EnableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Disable DMA Mode for transmission + * @rmtoll CR3 DMAT LL_USART_DisableDMAReq_TX + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx) +{ + ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT); +} + +/** + * @brief Check if DMA Mode is enabled for transmission + * @rmtoll CR3 DMAT LL_USART_IsEnabledDMAReq_TX + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_TX(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DMAT) == (USART_CR3_DMAT)) ? 1UL : 0UL); +} + +/** + * @brief Enable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_EnableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_EnableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Disable DMA Disabling on Reception Error + * @rmtoll CR3 DDRE LL_USART_DisableDMADeactOnRxErr + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_DisableDMADeactOnRxErr(USART_TypeDef *USARTx) +{ + CLEAR_BIT(USARTx->CR3, USART_CR3_DDRE); +} + +/** + * @brief Indicate if DMA Disabling on Reception Error is disabled + * @rmtoll CR3 DDRE LL_USART_IsEnabledDMADeactOnRxErr + * @param USARTx USART Instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_USART_IsEnabledDMADeactOnRxErr(const USART_TypeDef *USARTx) +{ + return ((READ_BIT(USARTx->CR3, USART_CR3_DDRE) == (USART_CR3_DDRE)) ? 1UL : 0UL); +} + +/** + * @brief Get the data register address used for DMA transfer + * @rmtoll RDR RDR LL_USART_DMA_GetRegAddr\n + * @rmtoll TDR TDR LL_USART_DMA_GetRegAddr + * @param USARTx USART Instance + * @param Direction This parameter can be one of the following values: + * @arg @ref LL_USART_DMA_REG_DATA_TRANSMIT + * @arg @ref LL_USART_DMA_REG_DATA_RECEIVE + * @retval Address of data register + */ +__STATIC_INLINE uint32_t LL_USART_DMA_GetRegAddr(const USART_TypeDef *USARTx, uint32_t Direction) +{ + uint32_t data_reg_addr; + + if (Direction == LL_USART_DMA_REG_DATA_TRANSMIT) + { + /* return address of TDR register */ + data_reg_addr = (uint32_t) &(USARTx->TDR); + } + else + { + /* return address of RDR register */ + data_reg_addr = (uint32_t) &(USARTx->RDR); + } + + return data_reg_addr; +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Data_Management Data_Management + * @{ + */ + +/** + * @brief Read Receiver Data register (Receive Data value, 8 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData8 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0xFF + */ +__STATIC_INLINE uint8_t LL_USART_ReceiveData8(const USART_TypeDef *USARTx) +{ + return (uint8_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR) & 0xFFU); +} + +/** + * @brief Read Receiver Data register (Receive Data value, 9 bits) + * @rmtoll RDR RDR LL_USART_ReceiveData9 + * @param USARTx USART Instance + * @retval Value between Min_Data=0x00 and Max_Data=0x1FF + */ +__STATIC_INLINE uint16_t LL_USART_ReceiveData9(const USART_TypeDef *USARTx) +{ + return (uint16_t)(READ_BIT(USARTx->RDR, USART_RDR_RDR)); +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) + * @rmtoll TDR TDR LL_USART_TransmitData8 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0xFF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData8(USART_TypeDef *USARTx, uint8_t Value) +{ + USARTx->TDR = Value; +} + +/** + * @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) + * @rmtoll TDR TDR LL_USART_TransmitData9 + * @param USARTx USART Instance + * @param Value between Min_Data=0x00 and Max_Data=0x1FF + * @retval None + */ +__STATIC_INLINE void LL_USART_TransmitData9(USART_TypeDef *USARTx, uint16_t Value) +{ + USARTx->TDR = (uint16_t)(Value & 0x1FFUL); +} + +/** + * @} + */ + +/** @defgroup USART_LL_EF_Execution Execution + * @{ + */ + +/** + * @brief Request an Automatic Baud Rate measurement on next received data frame + * @note Macro IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(USARTx) can be used to check whether or not + * Auto Baud Rate detection feature is supported by the USARTx instance. + * @rmtoll RQR ABRRQ LL_USART_RequestAutoBaudRate + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestAutoBaudRate(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_ABRRQ); +} + +/** + * @brief Request Break sending + * @rmtoll RQR SBKRQ LL_USART_RequestBreakSending + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestBreakSending(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_SBKRQ); +} + +/** + * @brief Put USART in mute mode and set the RWU flag + * @rmtoll RQR MMRQ LL_USART_RequestEnterMuteMode + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestEnterMuteMode(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_MMRQ); +} + +/** + * @brief Request a Receive Data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @note Allows to discard the received data without reading them, and avoid an overrun + * condition. + * @rmtoll RQR RXFRQ LL_USART_RequestRxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestRxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_RXFRQ); +} + +/** + * @brief Request a Transmit data and FIFO flush + * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not + * FIFO mode feature is supported by the USARTx instance. + * @rmtoll RQR TXFRQ LL_USART_RequestTxDataFlush + * @param USARTx USART Instance + * @retval None + */ +__STATIC_INLINE void LL_USART_RequestTxDataFlush(USART_TypeDef *USARTx) +{ + SET_BIT(USARTx->RQR, (uint16_t)USART_RQR_TXFRQ); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup USART_LL_EF_Init Initialization and de-initialization functions + * @{ + */ +ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx); +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct); +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct); +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_USART_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_utils.h b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_utils.h new file mode 100644 index 0000000000..ce4653e142 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Inc/stm32wl3x_ll_utils.h @@ -0,0 +1,305 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_utils.h + * @author MCD Application Team + * @brief Header file of UTILS LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The LL UTILS driver contains a set of generic APIs that can be + used by user: + (+) Device electronic signature + (+) Timing functions + (+) PLL configuration functions + + @endverbatim + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3x_LL_UTILS_H +#define STM32WL3x_LL_UTILS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +/** @defgroup UTILS_LL UTILS + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Constants UTILS Private Constants + * @{ + */ + +/* Max delay can be used in LL_mDelay */ +#define LL_MAX_DELAY 0xFFFFFFFFU + +/** + * @brief Unique device ID register base address + */ +#define UID_BASE_ADDRESS UID64_BASE + +/** + * @brief Flash size data register base address + */ +#define FLASHSIZE_BASE_ADDRESS FLASHSIZE_BASE + +/** + * @brief RAM size data register base address + */ +#define RAMSIZE_BASE_ADDRESS RAMSIZE_BASE + +/** + * @brief Package data register base address + */ +#define PACKAGE_BASE_ADDRESS PACKAGE_BASE + +/** + * @brief Device ID data register base address + */ +#define DEV_ID_BASE_ADDRESS DEV_ID_BASE +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_Private_Macros UTILS Private Macros + * @{ + */ +/** + * @} + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup UTILS_LL_ES_INIT UTILS Exported structures + * @{ + */ + + +/** + * @brief UTILS System, AHB and APB buses clock configuration structure definition + */ +typedef struct +{/*Sys clock divider. This clock is derived from the system clock (SYSCLK). + This parameter can be a value of @ref RCC_LL_EC_SYSCLK_DIV. */ + uint32_t dummy; +} LL_UTILS_ClkInitTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Constants UTILS Exported Constants + * @{ + */ + +/** @defgroup UTILS_EC_HSE_BYPASS HSE Bypass activation + * @{ + */ +#define LL_UTILS_HSEBYPASS_OFF 0x00000000U /*!< HSE Bypass is not enabled */ +#define LL_UTILS_HSEBYPASS_ON 0x00000001U /*!< HSE Bypass is enabled */ +/** + * @} + */ + +/** @defgroup UTILS_EC_PACKAGETYPE PACKAGE TYPE + * @{ + */ +#define LL_UTILS_PACKAGETYPE_QFN48 0x5F485F48U /*!< QFN48 package type */ +#define LL_UTILS_PACKAGETYPE_QFN32 0x5F325F32U /*!< QFN32 package type */ +#define LL_UTILS_PACKAGETYPE_CSP49 0xAC49AC49U /*!< CSP49 package type */ +/** + * @} + */ + +/** @defgroup UTILS_EC_RAMSIZE RAM SIZE + * @{ + */ +#define LL_UTILS_RAMSIZE_24K 0x00000000U /*!< 24 kB of RAM available */ +#define LL_UTILS_RAMSIZE_32K 0x00000001U /*!< 32 kB of RAM available */ +#define LL_UTILS_RAMSIZE_48K 0x00000002U /*!< 48 kB of RAM available */ +#define LL_UTILS_RAMSIZE_64K 0x00000003U /*!< 64 kB of RAM available */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup UTILS_LL_Exported_Functions UTILS Exported Functions + * @{ + */ + +/** @defgroup UTILS_EF_DEVICE_ELECTRONIC_SIGNATURE DEVICE ELECTRONIC SIGNATURE + * @{ + */ + +/** + * @brief Get Word0 of the unique device identifier (UID based on 64 bits) + * @retval Word0 of UID64 + */ +__STATIC_INLINE uint32_t LL_GetUID_Word0(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)UID_BASE_ADDRESS))); +} + +/** + * @brief Get Word1 of the unique device identifier (UID based on 64 bits) + * @retval Word1 of UID64 + */ +__STATIC_INLINE uint32_t LL_GetUID_Word1(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)(UID_BASE_ADDRESS + 4U)))); +} + +/** + * @brief Get Flash memory size + * @note This bitfield indicates the words number of the device Flash memory expressed. + * As an example, 0x7FFF corresponds to 128 Kbytes. + * @retval FLASH_SIZE[15:0]: Flash memory size + */ +__STATIC_INLINE uint32_t LL_GetFlashSize(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)FLASHSIZE_BASE_ADDRESS)) & 0x0000FFFFUL); +} + +/** + * @brief Get RAM memory size + * @retval Returned value can be one of the following values: + * @arg @ref LL_UTILS_RAMSIZE_24K + * @arg @ref LL_UTILS_RAMSIZE_32K + * @arg @ref LL_UTILS_RAMSIZE_48K + * @arg @ref LL_UTILS_RAMSIZE_64K + */ +__STATIC_INLINE uint32_t LL_GetRAMSize(void) +{ + __IOM uint32_t tmpreg; +#if defined(FLASH_FLASH_SIZE_RAM_SIZE) + tmpreg = (READ_REG(*((uint32_t *)RAMSIZE_BASE_ADDRESS)) & FLASH_FLASH_SIZE_RAM_SIZE) >> FLASH_FLASH_SIZE_RAM_SIZE_Pos; + + if (tmpreg == 0) { + tmpreg = LL_UTILS_RAMSIZE_32K; + } +#else + tmpreg = LL_UTILS_RAMSIZE_24K; +#endif + + return tmpreg; +} + +/** + * @brief Get Package type + * @retval Returned value can be one of the following values: + * @arg @ref LL_UTILS_PACKAGETYPE_QFN48 + * @arg @ref LL_UTILS_PACKAGETYPE_QFN32 + * @arg @ref LL_UTILS_PACKAGETYPE_CSP49 + */ +__STATIC_INLINE uint32_t LL_GetPackageType(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x1FU); +} + +/** + * @brief Get Device version and cut information + * @retval DIE_ID register information + */ +__STATIC_INLINE uint32_t LL_GetDIE_ID(void) +{ + return (uint32_t)(READ_REG(*((uint32_t *)DEV_ID_BASE_ADDRESS))); +} + +/** + * @} + */ + +/** @defgroup UTILS_LL_EF_DELAY DELAY + * @{ + */ +/** + * @brief This function configures the Cortex-M SysTick source of the time base. + * @param HCLKFrequency SysClk frequency in Hz + * @note When a RTOS is used, it is recommended to avoid changing the SysTick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param Ticks Number of ticks + * @retval None + */ + +__STATIC_INLINE void LL_InitTick(uint32_t HCLKFrequency, uint32_t Ticks) +{ + /* Configure the SysTick to have interrupt in 1ms time base */ + SysTick->LOAD = (uint32_t)((HCLKFrequency / Ticks) - 1UL); /* set reload register */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* */ +} + +void LL_Init1msTick(uint32_t HCLKFrequency); + +void LL_mDelay(uint32_t Delay); + +/** + * @} + */ + +/** @defgroup UTILS_EF_SYSTEM SYSTEM + * @{ + */ + +void LL_SetSystemCoreClock(uint32_t HCLKFrequency); +uint32_t LL_GetSystemCoreClock(void); +#if defined(STM32WL3XX) +void LL_SetXTALFreq(uint32_t freq); +uint32_t LL_GetXTALFreq(void); +#endif /* STM32WL3XX */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3x_LL_UTILS_H */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/LICENSE.md b/system/Drivers/STM32WL3x_HAL_Driver/LICENSE.md new file mode 100644 index 0000000000..eb0b33cda6 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/LICENSE.md @@ -0,0 +1,27 @@ +Copyright 2024 STMicroelectronics. +All rights reserved. + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this +list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, +this list of conditions and the following disclaimer in the documentation and/or +other materials provided with the distribution. + +3. Neither the name of the copyright holder nor the names of its contributors +may be used to endorse or promote products derived from this software without +specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/system/Drivers/STM32WL3x_HAL_Driver/README.md b/system/Drivers/STM32WL3x_HAL_Driver/README.md new file mode 100644 index 0000000000..7880768d7a --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/README.md @@ -0,0 +1,36 @@ +# STM32CubeWL3 HAL Driver MCU Component + +![latest tag](https://img.shields.io/github/v/tag/STMicroelectronics/stm32wl3x-hal-driver.svg?color=brightgreen) + +## Overview + +**STM32Cube** is a STMicroelectronics original initiative aimed at making life easier for developers by reducing effort, time and cost. + +**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform delivered for each STM32 series. + * The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product. + * The STM32 HAL-LL drivers, an abstraction layer offering a set of APIs ensuring maximized portability across the STM32 portfolio. + * The BSP drivers of each evaluation, demonstration, or nucleo board provided for this STM32 series. + * A consistent set of middleware libraries such as FatFs, FreeRTOS, Sigfox... + * A full set of software projects (basic examples, applications, and demonstrations) for each board, each project developed in three flavors using three toolchains (EWARM, MDK-ARM, and STM32CubeIDE). + +Two models of publication are proposed for the STM32Cube embedded software: + * The monolithic **MCU Package**: all STM32Cube software modules of one STM32 series are present (Drivers, Middleware, Projects, Utilities) in the repository (usual name **STM32Cubexx**, xx corresponding to the STM32 series). + * The **MCU component**: each STM32Cube software module being part of the STM32Cube MCU Package, is delivered as an individual repository, allowing the user to select and get only the required software functions. + +## Description + +This **stm32wl3x_hal_driver** MCU component repo is one element of the STM32CubeWL3 MCU embedded software package, providing the **HAL-LL Drivers** part. + +## Release note + +Details about the content of this release are available in the release note [here](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/stm32wl3x-hal-driver/blob/main/Release_Notes.html). + +## Compatibility information + +It is **crucial** that you use a consistent set of versions for the CMSIS Core - CMSIS Device - HAL, as mentioned in [this](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/STM32CubeWL3/blob/main/Release_Notes.html) release note. + +The full **STM32CubeWL3** MCU package is available [here](https://github.com/STMicroelectronics/STM32CubeWL3). + +## Troubleshooting + +Please refer to the [CONTRIBUTING.md](CONTRIBUTING.md) guide. diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Release_Notes.html b/system/Drivers/STM32WL3x_HAL_Driver/Release_Notes.html new file mode 100644 index 0000000000..28e1769699 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Release_Notes.html @@ -0,0 +1,234 @@ + + + + + + + Release Notes for STM32CubeWL33 HAL Drivers Package + + + + + + +
+
+
+

Release Notes for

+

STM32WL3xx HAL Drivers

+

Copyright © 2024-2025 STMicroelectronics

+ +
+

Purpose

+

The STM32Cube HAL and LL, an STM32 abstraction layer embedded software, ensure maximized portability across STM32 portfolio.

+

The portable APIs layer provides a generic, multi instanced and simple set of APIs to interact with the upper layer (application, libraries and stacks). It is composed of native and extended APIs set. It is directly built around a generic architecture and allows the build-upon layers, like the middleware layer, to implement its functions without knowing in-depth the used STM32 device. This improves the library code reusability and guarantees an easy portability on other devices and STM32 families.

+

The Low Layer (LL) drivers are part of the STM32Cube firmware HAL that provides a basic set of optimized and one shot services. The Low layer drivers, contrary to the HAL ones are not fully portable across the STM32 families; the availability of some functions depends on the physical availability of the relative features on the product. The Low Layer (LL) drivers are designed to offer the following features:

+
    +
  • New set of inline functions for direct and atomic register access
    • +
  • One-shot operations that can be used by the HAL drivers or from application level
    • +
  • Full independence from HAL and standalone usage (without HAL drivers)
    • +
  • Full features coverage of all the supported peripherals
    • +
+
+
+

Update History

+
+ +
+

Main Changes

+

Release of HAL and LL drivers for STM32WL3x devices

+

Contents

+

HAL Drivers updates

+
    +
  • HAL MRSUBG driver +
      +
    • Fixed wrong length of SYNC word in wM-Bus packet initialization function.
      • +
    • Fixed HAL_MRSubG_Sequencer_Microseconds return value.
      • +
    • Moved HAL_MRSUBG_TIMER_CPU_WKUP IRQ Handler from MRSUBG to MRSUBG TIMER.
      • +
    • Updated names of IRQ handlers.
      • +
    • +
  • HAL LPAWUR driver +
      +
    • Added MspInit and MspDeInit functions to MRSUBG, MRSUBG TIMER, and LPAWUR.
      • +
    • +
  • HAL RCC driver +
      +
    • Added support for RCC_LPUART1_CLKSOURCE_16M with a frequency of 16,000,000.
      • +
    • +
+

LL Drivers updates

+
    +
  • LL RCC driver +
      +
    • Added LL RCC APIs to manage RTC clock: LL_RCC_EnableRTC(), LL_RCC_DisableRTC() and LL_RCC_IsEnabledRTC().
      • +
    • +
+

Supported Devices and boards

+
    +
  • NUCLEO-WL33CC1 board
    • +
  • NUCLEO-WL33CC2 board
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+

Known Limitations

+
    +
  • None
    • +
+

Dependencies

+
    +
  • None
    • +
+

Notes

+
    +
  • None
    • +
+
+
+
+ +
+

Main Changes

+

Release of HAL and LL drivers for STM32WL3x devices

+Improved MRSUBG LL and HAL drivers with new APIs and macros: +
    +
  • +
    __HAL_MRSUBG_GET_DATABUFFER_COUNT()
    +
    • +
  • +
    __HAL_MRSUBG_SET_PQI_THRESHOLD(__THRVAL__)
    +
    • +
  • +
    LL_MRSubG_GetRssiLevelOnSync(void)
    +
    • +
  • +
    LL_MRSubG_SetRSSIFilter(uint32_t rssiFilter)
    +
    • +
  • +
    LL_MRSubG_SetClkRecCtrl0(uint32_t clkRec)
    +
    • +
  • +
    LL_MRSubG_SetClkRecCtrl1(uint32_t clkRec)
    +
    • +
  • +
    LL_MRSubG_SetAFC0(uint32_t afcCfg)
    +
    • +
  • +
    LL_MRSubG_SetAFC1(uint32_t afcCfg)
    +
    • +
  • +
    LL_MRSubG_SetAFC2(uint32_t afcCfg)
    +
    • +
  • +
    LL_MRSubG_SetAFC3(uint32_t afcCfg)
    +
    • +
+
    +
  • HAL ADC driver +
      +
    • Fix rmtoll doxygen comment in LL_ADC_GetCalibPointOffset()
      • +
    • +
  • HAL UART driver +
      +
    • Corrections in CHM/PDF rendering for HAL_UART
      • +
    • Provide accurate position in RxEventCallback when ReceptionToIdle mode is used with DMA, when UART and DMA interrupts process is delayed
      • +
    • Correct references to HAL_UARTEx_WakeupCallback and to HAL_UART_WAKEUP_CB_ID define, according to series capabilities
      • +
    • +
  • LL LPUART driver +
      +
    • Solve Coverity out-of-bound memory access warning in use of LPUART_PRESCALER_TAB array
      • +
    • +
  • LL USART driver +
      +
    • Solve Coverity out-of-bound memory access warning in use of USART_PRESCALER_TAB array
      • +
    • +
+

Check the code documentation for further details.

+

Contents

+
    +
  • Release of HAL/LL drivers +
      +

    • HAL: COMP, CORTEX, CRC, CRYP, DMA, FLASH, GPIO, I2C, IRDA, IWDG, LCD, LPAWUR, MRSUBG, PWR, RCC, RNG, RTC, SMARTCARD, SPI, TIM, UART, USART

      • +

    • LL: COMP, CRC, DMA, GPIO, I2C, LCSC, LPUART, LPAWUR, MRSUBG, PWR, RCC, RNG, RTC, SPI, TIM, USART, UTILS

      • +
    • +
+

Supported Devices and boards

+
    +
  • NUCLEO-WL33CC1 board
    • +
  • NUCLEO-WL33CC2 board
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+

Known Limitations

+
    +
  • None
    • +
+

Dependencies

+
    +
  • None
    • +
+

Notes

+
    +
  • None
    • +
+
+
+
+ +
+

Main Changes

+

First Official Release of HAL and LL drivers for STM32WL33 devices

+

Contents

+
    +
  • First Official Release of HAL/LL drivers +
      +

    • HAL: COMP, CORTEX, CRC, CRYP, DMA, FLASH, GPIO, I2C, IRDA, IWDG, LCD, LPAWUR, MRSUBG, PWR, RCC, RNG, RTC, SMARTCARD, SPI, TIM, UART, USART

      • +

    • LL: COMP, CRC, DMA, GPIO, I2C, LCSC, LPUART, LPAWUR, MRSUBG, PWR, RCC, RNG, RTC, SPI, TIM, USART, UTILS

      • +
    • +
+

Supported Devices and boards

+
    +
  • NUCLEO-WL33CC board
    • +
+

Backward compatibility

+
    +
  • Not applicable
    • +
+

Known Limitations

+
    +
  • None
    • +
+

Dependencies

+
    +
  • None
    • +
+

Notes

+
    +
  • None
    • +
+
+
+
+
+
+
+
+

For complete documentation on STM32 Microcontrollers , visit: www.st.com/stm32

+

This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge.

+
+

Info

+
+
+
+ + diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal.c new file mode 100644 index 0000000000..74489f8f51 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal.c @@ -0,0 +1,560 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup HAL + * @brief HAL module driver + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + + +/* Private macro -------------------------------------------------------------*/ +/* Exported variables ---------------------------------------------------------*/ +/** @defgroup HAL_Exported_Variables HAL Exported Variables + * @{ + */ +__IO uint32_t uwTick; +uint32_t uwTickPrio = (1UL << __NVIC_PRIO_BITS); /* Invalid PRIO */ +HAL_TickFreqTypeDef uwTickFreq = HAL_TICK_FREQ_DEFAULT; /* 1KHz */ +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup HAL_Exported_Functions + * @{ + */ + +/** @addtogroup HAL_Exported_Functions_Group1 + * @brief HAL Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### HAL Initialization and Configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the Flash interface the NVIC allocation and initial time base + clock configuration. + (+) De-initialize common part of the HAL. + (+) Configure the time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) SysTick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __weak + to make override possible in case of other implementations in user file. +@endverbatim + * @{ + */ + +/** + * @brief This function is used to initialize the HAL Library; it must be the first + * instruction to be executed in the main program (before to call any other + * HAL function), it performs the following: + * Configures the SysTick to generate an interrupt each 1 millisecond, + * which is clocked by the System Clock. + * Calls the HAL_MspInit() callback function defined in user file + * "stm32wl3x_hal_msp.c" to do the global low level hardware initialization + * + * @note SysTick is used as time base for the HAL_Delay() function, the application + * need to ensure that the SysTick time base is always set to 1 millisecond + * to have correct HAL operation. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Use SysTick as time base source and configure 1ms tick (default clock after Reset is MSI) */ + if (HAL_InitTick(TICK_INT_PRIORITY) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Init the low level hardware */ + HAL_MspInit(); + } + + /* Return function status */ + return status; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the source of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_AHB1_FORCE_RESET(); + __HAL_RCC_AHB1_RELEASE_RESET(); + + __HAL_RCC_APB0_FORCE_RESET(); + __HAL_RCC_APB0_RELEASE_RESET(); + + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base: + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (uwTickFreq != 0U) + { + /*Configure the SysTick to have interrupt in 1ms time basis*/ + if (HAL_SYSTICK_Config(HAL_RCC_GetSysClockFreq() / (1000U / uwTickFreq)) == 0U) + { + /* Configure the SysTick IRQ priority */ + if (TickPriority < (1UL << __NVIC_PRIO_BITS)) + { + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority, 0); + uwTickPrio = TickPriority; + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + } + else + { + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group2 + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device revision identifier + (+) Get the device identifier + (+) Get the unique device identifier + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in SysTick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick += (uint32_t)uwTickFreq; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function returns a tick priority. + * @retval tick priority + */ +uint32_t HAL_GetTickPrio(void) +{ + return uwTickPrio; +} + +/** + * @brief Set new tick Freq. + * @retval Status + */ +HAL_StatusTypeDef HAL_SetTickFreq(HAL_TickFreqTypeDef Freq) +{ + HAL_StatusTypeDef status = HAL_OK; + assert_param(IS_TICKFREQ(Freq)); + + if (uwTickFreq != Freq) + { + uwTickFreq = Freq; + + /* Apply the new tick Freq */ + status = HAL_InitTick(uwTickPrio); + } + + return status; +} + +/** + * @brief Return tick frequency. + * @retval tick period in Hz + */ +HAL_TickFreqTypeDef HAL_GetTickFreq(void) +{ + return uwTickFreq; +} + +/** + * @brief This function provides minimum delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(uint32_t Delay) +{ + uint32_t tickstart = HAL_GetTick(); + uint32_t wait = Delay; + + /* Add a freq to guarantee minimum wait */ + if (wait < HAL_MAX_DELAY) + { + wait += (uint32_t)(uwTickFreq); + } + + while ((HAL_GetTick() - tickstart) < wait) + { + } +} + + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Returns the HAL revision + * @retval version : 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32WL3X_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return (LL_SYSCFG_GetDeviceRevision()); +} + +/** + * @brief Returns the device revision identifier. + * @retval Device revision identifier + */ +uint32_t HAL_GetVERID(void) +{ + return (LL_SYSCFG_GetDeviceVersion()); +} + +/** + * @brief Returns the device device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return (LL_SYSCFG_GetDeviceID()); +} + +/** + * @brief Returns the Jtag device identifier. + * @retval Device identifier + */ +uint32_t HAL_GetJTAGID(void) +{ + return (LL_SYSCFG_GetDeviceJTAG_ID()); +} + +/** + * @brief Return the first word of the unique device identifier (UID based on 64 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw0(void) +{ + return (READ_REG(*((uint32_t *)UID64_BASE))); +} + +/** + * @brief Return the second word of the unique device identifier (UID based on 64 bits) + * @retval Device identifier + */ +uint32_t HAL_GetUIDw1(void) +{ + return (READ_REG(*((uint32_t *)(UID64_BASE + 4U)))); +} + + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group3 + * @brief HAL Debug functions + * +@verbatim + =============================================================================== + ##### HAL Debug functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during SLEEP mode + +@endverbatim + * @{ + */ + +/** + * @brief Enable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during SLEEP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @} + */ + + +/** + * @} + */ + +/** @addtogroup HAL_Exported_Functions_Group4 + * @brief SYSCFG configuration functions + * +@verbatim + =============================================================================== + ##### HAL SYSCFG configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Enable/Disable the I/O analog switch voltage Control +@endverbatim + * @{ + */ + + +/** + * @brief Enable the I/O analog switch voltage Control + * @retval None + */ +void HAL_SYSCFG_EnableIOAnalogSwitchControl_PB14(void) +{ + SET_BIT(SYSCFG->GPIO_SWA_CTRL, SYSCFG_GPIO_SWA_CTRL_ATB1_nPVD); +} + +/** + * @brief Disable the I/O analog switch voltage Control + * @retval None + */ +void HAL_SYSCFG_DisableIOAnalogSwitchControl_PB14(void) +{ + CLEAR_BIT(SYSCFG->GPIO_SWA_CTRL, SYSCFG_GPIO_SWA_CTRL_ATB1_nPVD); +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_adc.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_adc.c new file mode 100644 index 0000000000..0f339542cf --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_adc.c @@ -0,0 +1,2208 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_adc.c + * @author GPM Application Team + * @brief This file provides firmware functions to manage the following + * functionalities of the Analog to Digital Converter (ADC) + * peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * Other functions (extended functions) are available in file + * "stm32wl3x_hal_adc_ex.c". + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### ADC peripheral features ##### + ============================================================================== + [..] + (+) Conversion frequency is up to 1 Msps. + + (+) Three input voltage ranges are supported (0V : 1.2V, 0V : 2.4V, 0V : 3.6V). + + (+) Up to eight analog single ended channels or four analog differential inputs or a mix of +both. + + (+) Temperature sensor conversion. + + (+) Battery level conversion up to 3.6V. + + (+) Continuous or single acquisition. + + (+) ADC Down Sampler for multi-purpose applications to improve analog performance +while off-loading the CPU (ratio adjustable from 1 to 128). + + (+) A watchdog feature to inform when data is outside thresholds. + + (+) DMA capability. + + (+) Interrupt sources with flags. + + ##### How to use this driver ##### + ============================================================================== + [..] + + *** Configuration of top level parameters related to ADC *** + ============================================================ + [..] + + (#) Enable the ADC interface + (++) As prerequisite, ADC clock must be configured at RCC top level. + + (++) Example: + Into HAL_ADC_MspInit() (recommended code location) or with + other device clock parameters configuration: + (+++) __HAL_RCC_ADC_CLK_ENABLE(); (mandatory) + + (#) ADC pins configuration + (++) Enable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_ENABLE() + (++) Configure these ADC pins in analog mode + using function HAL_GPIO_Init() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Configure the NVIC for ADC + using function HAL_NVIC_EnableIRQ(ADCx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding ADC interruption vector + ADC_IRQHandler(). + + (#) Optionally, in case of usage of DMA: + (++) Configure the DMA (DMA channel, mode normal or circular, ...) + using function HAL_DMA_Init(). + (++) Configure the NVIC for DMA + using function HAL_NVIC_EnableIRQ(DMAx_Channelx_IRQn) + (++) Insert the ADC interruption handler function HAL_ADC_IRQHandler() + into the function of corresponding DMA interruption vector + DMAx_Channelx_IRQHandler(). + + *** Configuration of ADC, channels parameters *** + ================================================================ + [..] + + (#) Configure the ADC parameters using function HAL_ADC_Init(). + + (#) Configure the channels using the function HAL_ADC_ConfigChannel(). + + (#) Optionally, configure the analog watchdog parameters (channels + monitored, thresholds, ...) + using function HAL_ADC_AWDConfig(). + + *** Execution of ADC conversions *** + ==================================== + [..] + + (#) ADC driver can be used among three modes: polling, interruption, + transfer by DMA. + + (++) ADC conversion by polling: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start() + (+++) Wait for ADC conversion completion + using function HAL_ADC_PollForConversion() + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop() + + (++) ADC conversion by interruption: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_IT() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() + (this function must be implemented in user program) + (+++) Retrieve conversion results + using function HAL_ADC_GetValue() + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_IT() + + (++) ADC conversion with transfer by DMA: + (+++) Activate the ADC peripheral and start conversions + using function HAL_ADC_Start_DMA() + (+++) Wait for ADC conversion completion by call of function + HAL_ADC_ConvCpltCallback() or HAL_ADC_ConvHalfCpltCallback() + (these functions must be implemented in user program) + (+++) Conversion results are automatically transferred by DMA into + destination variable address. + (+++) Stop conversion and disable the ADC peripheral + using function HAL_ADC_Stop_DMA() + + [..] + + (@) Callback functions must be implemented in user program: + (+@) HAL_ADC_ErrorCallback() + (+@) LevelOutOfWindowCallback() (callback of analog watchdog) + (+@) HAL_ADC_ConvCpltCallback() + (+@) HAL_ADC_ConvHalfCpltCallback + + *** Deinitialization of ADC *** + ============================================================ + [..] + + (#) Disable the ADC interface + (++) ADC clock can be hard reset and disabled at RCC top level. + (++) Hard reset of ADC peripherals + using macro __HAL_RCC_ADC_FORCE_RESET(), __HAL_RCC_ADC_RELEASE_RESET(). + (++) ADC clock disable + using the equivalent macro/functions as configuration step. + (+++) Example: + Into HAL_ADC_MspDeInit() (recommended code location). + + (#) ADC pins configuration + (++) Disable the clock for the ADC GPIOs + using macro __HAL_RCC_GPIOx_CLK_DISABLE() + + (#) Optionally, in case of usage of ADC with interruptions: + (++) Disable the NVIC for ADC + using function HAL_NVIC_DisableIRQ(ADCx_IRQn) + + (#) Optionally, in case of usage of DMA: + (++) Deinitialize the DMA + using function HAL_DMA_DeInit(). + (++) Disable the NVIC for DMA + using function HAL_NVIC_DisableIRQ(DMAx_Channelx_IRQn) + + [..] + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_ADC_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions @ref HAL_ADC_RegisterCallback() to register an interrupt callback. + [..] + + Function @ref HAL_ADC_RegisterCallback() allows to register following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog callback + (+) ErrorCallback : ADC error callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + + Use function @ref HAL_ADC_UnRegisterCallback to reset a callback to the default + weak function. + [..] + + @ref HAL_ADC_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) ConvCpltCallback : ADC conversion complete callback + (+) ConvHalfCpltCallback : ADC conversion DMA half-transfer callback + (+) LevelOutOfWindowCallback : ADC analog watchdog callback + (+) ErrorCallback : ADC error callback + (+) MspInitCallback : ADC Msp Init callback + (+) MspDeInitCallback : ADC Msp DeInit callback + [..] + + By default, after the @ref HAL_ADC_Init() and when the state is @ref HAL_ADC_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples @ref HAL_ADC_ConvCpltCallback(), @ref HAL_ADC_ErrorCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() only when + these callbacks are null (not registered beforehand). + [..] + + If MspInit or MspDeInit are not null, the @ref HAL_ADC_Init()/ @ref HAL_ADC_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + + Callbacks can be registered/unregistered in @ref HAL_ADC_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in @ref HAL_ADC_STATE_READY or @ref HAL_ADC_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + [..] + + Then, the user first registers the MspInit/MspDeInit user callbacks + using @ref HAL_ADC_RegisterCallback() before calling @ref HAL_ADC_DeInit() + or @ref HAL_ADC_Init() function. + [..] + + When the compilation flag USE_HAL_ADC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup ADC ADC + * @brief ADC HAL module driver + * @{ + */ + +#ifdef HAL_ADC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +#define ADC_VBIAS_PRECH_DELAY_PRESC_MAX_VALUE (1020UL) /*!< Used to configure the VBIAS precharge pulse duration. + With PRECH_DELAY_SEL=0, the maximum delay is 1.02 ms + (255 x 4 us). */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc); +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc); +void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma); +void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma); +void ADC_DMAError(DMA_HandleTypeDef *hdma); + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Functions ADC Exported Functions + * @{ + */ + +/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief ADC Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the ADC. + (+) De-initialize the ADC. +@endverbatim + * @{ + */ + +/** + * @brief Initialize the ADC peripheral according to + * parameters specified in structure "ADC_InitTypeDef". + * @note As prerequisite, ADC clock must be configured at RCC top level + * (refer to description of RCC configuration for ADC + * in header of this file). + * @note Possibility to update parameters on the fly: + * This function initializes the ADC MSP (HAL_ADC_MspInit()) only when + * coming from ADC state reset. Following calls to this function can + * be used to reconfigure some parameters of ADC_InitTypeDef + * structure on the fly, without modifying MSP configuration. If ADC + * MSP has to be modified again, HAL_ADC_DeInit() must be called + * before HAL_ADC_Init(). + * The setting of these parameters is conditioned to ADC state. + * For parameters constraints, see comments of structure + * "ADC_InitTypeDef". + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_SAMPLERATE(hadc->Init.SampleRate)); + assert_param(IS_ADC_SAMPLINGMODE(hadc->Init.SamplingMode)); + assert_param(IS_ADC_OVERRUN(hadc->Init.Overrun)); + assert_param(IS_ADC_DATA_INVERT(hadc->Init.InvertOutputMode)); + assert_param(IS_ADC_DATAWIDTH(hadc->Init.DownSamplerConfig.DataWidth)); + assert_param(IS_ADC_DATARATIO(hadc->Init.DownSamplerConfig.DataRatio)); + assert_param(IS_ADC_NB_CONV(hadc->Init.SequenceLength)); + + /* Actions performed only if ADC is coming from state reset: */ + /* - Initialization of ADC MSP */ + if (hadc->State == HAL_ADC_STATE_RESET) + { +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + /* Init the ADC Callback settings */ + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; /* Legacy weak callback */ + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; /* Legacy weak callback */ + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; /* Legacy weak callback */ + hadc->ErrorCallback = HAL_ADC_ErrorCallback; /* Legacy weak callback */ + + if (hadc->MspInitCallback == NULL) + { + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hadc->MspInitCallback(hadc); +#else + /* Init the low level hardware */ + HAL_ADC_MspInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Initialize Lock */ + hadc->Lock = HAL_UNLOCKED; + } + + + /* Configuration of ADC parameters if there is no conversion on going */ + /* (ADC may already be enabled at this point if HAL_ADC_Init() is */ + /* called to update a parameter on the fly). */ + if (((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) && (LL_ADC_IsConversionOngoing(hadc->Instance) == 0UL)) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_DS_BUSY, + HAL_ADC_STATE_BUSY_INTERNAL); + + /* Configuration of ADC: */ + /* - Sample Rate Init.SampleRate */ + /* - Sample Rate MSB Init.SampleRateMsb */ + /* - Sampling Mode Init.SamplingMode */ + /* - Overrun Mode Init.Overrun */ + /* - Invert Output Bit Mode Init.InvertOutputMode */ + /* - Conversion Type Init.ConversionType */ + + /* Configure the sample rate */ + LL_ADC_SetSampleRate(hadc->Instance, hadc->Init.SampleRate); + + /* Configure the input sampling mode */ + LL_ADC_SetInputSamplingMode(hadc->Instance, hadc->Init.SamplingMode); + + /* Configure the continuous mode */ + if (hadc->Init.ContinuousConvMode == ENABLE) + { + LL_ADC_ContinuousModeEnable(hadc->Instance); + } + else + { + LL_ADC_ContinuousModeDisable(hadc->Instance); + } + + + /* Configure the overrun mode for the output data */ + LL_ADC_SetOverrunDS(hadc->Instance, hadc->Init.Overrun); + + /* Configure the bit to bit inversion (1' complement) mode */ + if (hadc->Init.InvertOutputMode == ADC_DATA_INVERT_NONE) + { + LL_ADC_InvertOutputDiffModeDisable(hadc->Instance); + LL_ADC_InvertOutputSingleNegModeDisable(hadc->Instance); + } + else if (hadc->Init.InvertOutputMode == ADC_DATA_INVERT_DIFF) + { + LL_ADC_InvertOutputDiffModeEnable(hadc->Instance); + LL_ADC_InvertOutputSingleNegModeDisable(hadc->Instance); + } + else if (hadc->Init.InvertOutputMode == ADC_DATA_INVERT_SING) + { + LL_ADC_InvertOutputDiffModeDisable(hadc->Instance); + LL_ADC_InvertOutputSingleNegModeEnable(hadc->Instance); + } + else + { + LL_ADC_InvertOutputDiffModeEnable(hadc->Instance); + LL_ADC_InvertOutputSingleNegModeEnable(hadc->Instance); + } + + LL_ADC_ConfigureDSDataOutput(hadc->Instance, hadc->Init.DownSamplerConfig.DataWidth, + hadc->Init.DownSamplerConfig.DataRatio); + + LL_ADC_SetSequenceLength(hadc->Instance, hadc->Init.SequenceLength); + + + /* Initialize the ADC state */ + /* Clear HAL_ADC_STATE_BUSY_INTERNAL bit, set HAL_ADC_STATE_READY bit */ + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL, HAL_ADC_STATE_READY); + } + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL); + + tmp_hal_status = HAL_ERROR; + } + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Deinitialize the ADC peripheral registers to their default reset + * values, with deinitialization of the ADC MSP. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check ADC handle */ + if (hadc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL); + + /* Stop potential conversion on going */ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Change ADC state */ + hadc->State = HAL_ADC_STATE_READY; + } + } + + /* Note: HAL ADC deInit is done independently of ADC conversion stop */ + /* and disable return status. In case of status fail, attempt to */ + /* perform deinitialization anyway and it is up user code in */ + /* in HAL_ADC_MspDeInit() to reset the ADC peripheral using */ + /* system RCC hard reset. */ + + /* ========== Reset ADC registers ========== */ +#if defined(ADC_IRQ_EN_MASK) + /* Reset register IER */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IRQ_EN_MASK); +#endif /* ADC_IRQ_EN_MASK */ +#if defined(ADC_IRQ_FLAGS_MASK) + /* Reset register ISR */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_IRQ_FLAGS_MASK); +#endif /* ADC_IRQ_FLAGS_MASK */ + + /* Reset all the registers */ + CLEAR_BIT(hadc->Instance->CONF, (ADC_CONF_BIT_INVERT_DIFF +#if defined(ADC_CONF_SAMPLE_RATE_MSB) + | ADC_CONF_SAMPLE_RATE_MSB +#endif /* ADC_CONF_SAMPLE_RATE_MSB */ + | ADC_CONF_OVR_DS_CFG | ADC_CONF_DMA_DS_ENA + | ADC_CONF_SAMPLE_RATE + | ADC_CONF_SMPS_SYNCHRO_ENA + | ADC_CONF_SEQ_LEN + | ADC_CONF_CONT +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + | ADC_CONF_VBIAS_PRECH_FORCE + | ADC_CONF_OVR_DF_CFG | ADC_CONF_DMA_DF_ENA + | ADC_CONF_OP_MODE +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + )); + + SET_BIT(hadc->Instance->CONF, (ADC_CONF_ADC_CONT_1V2 | ADC_CONF_BIT_INVERT_SN | ADC_CONF_SEQUENCE)); + + CLEAR_BIT(hadc->Instance->CTRL, (ADC_CTRL_STOP_OP_MODE | ADC_CTRL_START_CONV | ADC_CTRL_ADC_ON_OFF)); + +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + CLEAR_BIT(hadc->Instance->OCM_CTRL, (ADC_OCM_CTRL_OCM_ENA | ADC_OCM_CTRL_OCM_SRC)); + + CLEAR_BIT(hadc->Instance->PGA_CONF, (ADC_PGA_CONF_PGA_BIAS | ADC_PGA_CONF_PGA_GAIN)); +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + + CLEAR_BIT(hadc->Instance->SWITCH, (ADC_SWITCH_SE_VIN_7 | ADC_SWITCH_SE_VIN_6 + | ADC_SWITCH_SE_VIN_5 | ADC_SWITCH_SE_VIN_4 + | ADC_SWITCH_SE_VIN_3 | ADC_SWITCH_SE_VIN_2 + | ADC_SWITCH_SE_VIN_1 | ADC_SWITCH_SE_VIN_0)); + +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + CLEAR_BIT(hadc->Instance->DF_CONF, (ADC_DF_CONF_DF_HALF_D_EN + | ADC_DF_CONF_DF_HPF_EN | ADC_DF_CONF_DF_MICROL_RN + | ADC_DF_CONF_PDM_RATE + | ADC_DF_CONF_DF_O_S2U + | ADC_DF_CONF_DF_I_U2S | ADC_DF_CONF_DF_ITP1P2 + | ADC_DF_CONF_DF_CIC_DHF | ADC_DF_CONF_DF_CIC_DEC_FACTOR)); + + SET_BIT(hadc->Instance->DF_CONF, (ADC_DF_CONF_PDM_RATE_1 | ADC_DF_CONF_PDM_RATE_2)); +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + + CLEAR_BIT(hadc->Instance->DS_CONF, (ADC_DS_CONF_DS_WIDTH | ADC_DS_CONF_DS_RATIO)); + + CLEAR_BIT(hadc->Instance->SEQ_1, (ADC_SEQ_1_SEQ7 | ADC_SEQ_1_SEQ6 + | ADC_SEQ_1_SEQ5 | ADC_SEQ_1_SEQ4 + | ADC_SEQ_1_SEQ3 | ADC_SEQ_1_SEQ2 + | ADC_SEQ_1_SEQ1 | ADC_SEQ_1_SEQ0)); + + CLEAR_BIT(hadc->Instance->SEQ_2, (ADC_SEQ_2_SEQ15 | ADC_SEQ_2_SEQ14 + | ADC_SEQ_2_SEQ13 | ADC_SEQ_2_SEQ12 + | ADC_SEQ_2_SEQ11 | ADC_SEQ_2_SEQ10 + | ADC_SEQ_2_SEQ9 | ADC_SEQ_2_SEQ8)); + + MODIFY_REG(hadc->Instance->COMP_1, (ADC_COMP_1_OFFSET1 | ADC_COMP_1_GAIN1), 0x555UL); + MODIFY_REG(hadc->Instance->COMP_2, (ADC_COMP_1_OFFSET1 | ADC_COMP_1_GAIN1), 0x555UL); + MODIFY_REG(hadc->Instance->COMP_3, (ADC_COMP_1_OFFSET1 | ADC_COMP_1_GAIN1), 0x555UL); + MODIFY_REG(hadc->Instance->COMP_4, (ADC_COMP_1_OFFSET1 | ADC_COMP_1_GAIN1), 0x555UL); + + CLEAR_BIT(hadc->Instance->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN8 | ADC_COMP_SEL_OFFSET_GAIN7 + | ADC_COMP_SEL_OFFSET_GAIN6 | ADC_COMP_SEL_OFFSET_GAIN5 + | ADC_COMP_SEL_OFFSET_GAIN4 | ADC_COMP_SEL_OFFSET_GAIN3 + | ADC_COMP_SEL_OFFSET_GAIN2 | ADC_COMP_SEL_OFFSET_GAIN1 + | ADC_COMP_SEL_OFFSET_GAIN0)); + + MODIFY_REG(hadc->Instance->WD_TH, (ADC_WD_TH_WD_HT | ADC_WD_TH_WD_LT), ADC_WD_TH_WD_HT); + + CLEAR_BIT(hadc->Instance->WD_CONF, (ADC_WD_CONF_AWD_CHX)); + + CLEAR_BIT(hadc->Instance->IRQ_STATUS, (ADC_IRQ_STATUS_OVR_DS_IRQ + | ADC_IRQ_STATUS_AWD_IRQ + | ADC_IRQ_STATUS_EOS_IRQ + | ADC_IRQ_STATUS_EODS_IRQ + | ADC_IRQ_STATUS_EOC_IRQ +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + | ADC_IRQ_STATUS_DF_OVRFL_IRQ + | ADC_IRQ_STATUS_OVR_DF_IRQ + | ADC_IRQ_STATUS_EODF_IRQ +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + )); + + CLEAR_BIT(hadc->Instance->IRQ_ENABLE, (ADC_IRQ_ENABLE_OVR_DS_IRQ_ENA + | ADC_IRQ_ENABLE_AWD_IRQ_ENA + | ADC_IRQ_ENABLE_EOS_IRQ_ENA + | ADC_IRQ_ENABLE_EODS_IRQ_ENA + | ADC_IRQ_ENABLE_EOC_IRQ_ENA +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + | ADC_IRQ_ENABLE_DF_OVRFL_IRQ_ENA + | ADC_IRQ_ENABLE_OVR_DF_IRQ_ENA + | ADC_IRQ_ENABLE_EODF_IRQ_ENA +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + )); + +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + LL_ADC_SetVbiasPrechargeDelay(hadc->Instance, ADC_DEFAULT_VBIAS_PRECH_DELAY_US / 4UL); +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + if (hadc->MspDeInitCallback == NULL) + { + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: RCC clock, NVIC */ + hadc->MspDeInitCallback(hadc); +#else + /* DeInit the low level hardware: RCC clock, NVIC */ + HAL_ADC_MspDeInit(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Set ADC error code to none */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set ADC state */ + hadc->State = HAL_ADC_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Initialize the ADC MSP. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_MspInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitialize the ADC MSP. + * @param hadc ADC handle + * @note All ADC instances use the same core clock at RCC level, disabling + * the core clock reset all ADC instances). + * @retval None + */ +__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_MspDeInit must be implemented in the user file. + */ +} + +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User ADC Callback + * To be used instead of the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC watchdog callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_RegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID, + pADC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = pCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = pCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = pCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = pCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = pCallback; + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a ADC Callback + * ADC callback is redirected to the weak predefined callback + * @param hadc Pointer to a ADC_HandleTypeDef structure that contains + * the configuration information for the specified ADC. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_ADC_CONVERSION_COMPLETE_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_CONVERSION_HALF_CB_ID ADC conversion complete callback ID + * @arg @ref HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID ADC watchdog callback ID + * @arg @ref HAL_ADC_ERROR_CB_ID ADC error callback ID + * @arg @ref HAL_ADC_MSPINIT_CB_ID ADC Msp Init callback ID + * @arg @ref HAL_ADC_MSPDEINIT_CB_ID ADC Msp DeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_UnRegisterCallback(ADC_HandleTypeDef *hadc, HAL_ADC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if ((hadc->State & HAL_ADC_STATE_READY) != 0UL) + { + switch (CallbackID) + { + case HAL_ADC_CONVERSION_COMPLETE_CB_ID : + hadc->ConvCpltCallback = HAL_ADC_ConvCpltCallback; + break; + + case HAL_ADC_CONVERSION_HALF_CB_ID : + hadc->ConvHalfCpltCallback = HAL_ADC_ConvHalfCpltCallback; + break; + + case HAL_ADC_LEVEL_OUT_OF_WINDOW_1_CB_ID : + hadc->LevelOutOfWindowCallback = HAL_ADC_LevelOutOfWindowCallback; + break; + + case HAL_ADC_ERROR_CB_ID : + hadc->ErrorCallback = HAL_ADC_ErrorCallback; + break; + + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_ADC_STATE_RESET == hadc->State) + { + switch (CallbackID) + { + case HAL_ADC_MSPINIT_CB_ID : + hadc->MspInitCallback = HAL_ADC_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_ADC_MSPDEINIT_CB_ID : + hadc->MspDeInitCallback = HAL_ADC_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hadc->ErrorCode |= HAL_ADC_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group2 ADC Input and Output operation functions + * @brief ADC IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Poll for conversion complete. + (+) Poll for conversion event. + (+) Get result of channel conversion. + (+) Start conversion and enable interruptions. + (+) Stop conversion and disable interruptions. + (+) Handle ADC interrupt request + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable ADC DMA transfer. +@endverbatim + * @{ + */ + +/** + * @brief Enable ADC, start conversion. + * @note Interruptions enabled in this function: None. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_DS_EOC | HAL_ADC_STATE_DS_OVR, + HAL_ADC_STATE_DS_BUSY); + + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + } + + /* Clear ADC conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_IRQ_FLAG_EOS | ADC_IRQ_FLAG_EODS | ADC_IRQ_FLAG_OVRDS)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Start ADC conversion */ + LL_ADC_StartConversion(hadc->Instance); + + /* Return function status */ + return tmp_hal_status; +} + + +/** + * @brief Stop ADC conversion and disable ADC peripheral. + * @note: ADC peripheral disable is forcing stop of potential conversion. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Stop potential conversion on going*/ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_DS_BUSY, HAL_ADC_STATE_READY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Wait for a conversion to be completed. + * @note ADC conversion flags EOS (end of sequence) and EOC (end of + * conversion) are cleared by this function. + * @note This function cannot be used in a particular setup: ADC configured + * in DMA mode and polling for end of each conversion. + * In this case, DMA resets the flag EOC and polling cannot be + * performed on each conversion. Nevertheless, polling can still + * be performed on the complete sequence. + * @param hadc ADC handle + * @param Timeout Timeout value in millisecond. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Wait until End of unitary conversion or sequence conversions flag is raised */ + while (__HAL_ADC_GET_FLAG(hadc, ADC_IRQ_FLAG_EODS) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + /* Update ADC state machine */ + SET_BIT(hadc->State, HAL_ADC_STATE_DS_EOC); + + /* Check whether end of sequence is reached */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_IRQ_FLAG_EOS)) + { + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_DS_BUSY); + } + + /* Clear polled flag */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_IRQ_FLAG_EODS | ADC_IRQ_FLAG_EOS)); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Poll for ADC event. + * @param hadc ADC handle + * @param EventType the ADC event type. + * This parameter can be one of the following values: + * ADC_IRQ_FLAG_OVRFL ADC decimation filter saturated event (1) + * ADC_IRQ_FLAG_OVRDF ADC decimation filter overrun event (1) + * ADC_IRQ_FLAG_EODF ADC decimation filter conversion completed event (1) + * ADC_IRQ_FLAG_OVRDS ADC Down Sampler overrun event + * ADC_IRQ_FLAG_AWD1 ADC analog watchdog event + * ADC_IRQ_FLAG_EOS ADC sequence of conversion completed event + * ADC_IRQ_FLAG_EODS ADC Down Sampler conversion completed Event + * (1) todo: Only available on STM32WB0x + * @param Timeout Timeout value in millisecond. + * @note The relevant flag is cleared if found to be set, except for + * ADC_IRQ_FLAG_OVRDS. + * Indeed, the latter is reset only if hadc->Init.Overrun field is set + * to ADC_NEW_DATA_IS_KEPT. Otherwise, data register may be + * potentially overwritten by a new converted data as soon as OVR is + * cleared. + * To reset OVR flag once the preserved data is retrieved, the user can + * resort to macro __HAL_ADC_CLEAR_FLAG(hadc, ADC_IRQ_FLAG_OVRDS); + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef *hadc, uint32_t EventType, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_EVENT_TYPE(EventType)); + + /* Get tick count */ + tickstart = HAL_GetTick(); + + /* Check selected event flag */ + while (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL) + { + /* Check if timeout is disabled (set to infinite wait) */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Update ADC state machine to timeout */ + SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT); + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + switch (EventType) + { + + /* Check analog watchdog flag */ + case ADC_IRQ_FLAG_AWD1: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_IRQ_FLAG_AWD1); + + break; + + /* Check sequence of conversion completed flag */ + case ADC_IRQ_FLAG_EOS: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_DS_EOC); + + /* Clear ADC sequence of conversion completed flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_IRQ_FLAG_EOS); + + break; + + /* Check Down Sampler conversion completed flag */ + case ADC_IRQ_FLAG_EODS: + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_DS_EOC); + + /* Clear ADC Down Sampler conversion completed flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_IRQ_FLAG_EODS); + + break; + + /* Overrun event */ + default: /* Case ADC_OVR_EVENT */ + /* If overrun is set to overwrite previous data, overrun event is not */ + /* considered as an error. */ + if (hadc->Init.Overrun == ADC_NEW_DATA_IS_LOST) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_DS_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + } + else + { + /* Clear ADC Overrun flag only if Overrun is set to ADC_NEW_DATA_IS_KEPT + otherwise, data register is potentially overwritten by new converted data as soon + as OVR is cleared. */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_IRQ_FLAG_OVRDS); + } + break; + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable ADC and start conversion with interruption. + * @note Interruptions enabled in this function according to initialization + * setting : EOC (end of conversion), EOS (end of sequence), + * OVR overrun. + * Each of these interruptions has its dedicated callback function. + * @note To guarantee a proper reset of all interruptions once all the needed + * conversions are obtained, HAL_ADC_Stop_IT() must be called to ensure + * a correct stop of the IT-based conversions. + * @param hadc ADC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to conversion results */ + /* - Set state bitfield related to operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_DS_EOC | HAL_ADC_STATE_DS_OVR, + HAL_ADC_STATE_DS_BUSY); + + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Clear ADC conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_IRQ_FLAG_EODS | ADC_IRQ_FLAG_EOS | ADC_IRQ_FLAG_OVRDS)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* Disable all interruptions before enabling the desired ones */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IRQ_EN_EODS | ADC_IRQ_EN_EOS | ADC_IRQ_EN_OVRDS)); + + /* Enable ADC end of conversion interrupt */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IRQ_EN_EOS); + + /* Enable ADC overrun interrupt */ + /* If hadc->Init.Overrun is set to ADC_NEW_DATA_IS_LOST, only then is */ + /* ADC_IRQ_EN_OVRDS enabled; otherwise data overwrite is considered as */ + /* normal behavior and no CPU time is lost for a non-processed */ + /* interruption. */ + if (hadc->Init.Overrun == ADC_NEW_DATA_IS_LOST) + { + __HAL_ADC_ENABLE_IT(hadc, ADC_IRQ_EN_OVRDS); + } + + /* Enable conversion. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC conversion */ + LL_ADC_StartConversion(hadc->Instance); + + } + else + { + tmp_hal_status = HAL_BUSY; + } + + /* Return function status */ + return tmp_hal_status; +} + + +/** + * @brief Stop ADC conversion, disable interrution of + * end-of-conversion, disable ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential conversion on going*/ + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + /* Disable ADC end of conversion interrupt */ + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, (ADC_IRQ_EN_EODS | ADC_IRQ_EN_EOS | ADC_IRQ_EN_OVRDS)); + + /* 2. Disable the ADC peripheral */ + tmp_hal_status = ADC_Disable(hadc); + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_DS_BUSY, HAL_ADC_STATE_READY); + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + + +/** + * @brief Enable ADC, start conversion and transfer result through DMA. + * @note Interruptions enabled in this function: + * overrun (if applicable), DMA half transfer, DMA transfer complete. + * Each of these interruptions has its dedicated callback function. + * The ADC continuous mode is enabled in this DMA acquisition mode. + * @param hadc ADC handle + * @param pData Destination Buffer address. + * @param Length Number of data to be transferred from ADC peripheral to memory + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef *hadc, const uint32_t *pData, uint32_t Length) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Enable the ADC peripheral */ + tmp_hal_status = ADC_Enable(hadc); + + /* Start conversion if ADC is effectively enabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + /* - Clear state bitfield related to conversion results */ + /* - Set state bitfield related to operation */ + ADC_STATE_CLR_SET(hadc->State, + HAL_ADC_STATE_READY | HAL_ADC_STATE_DS_EOC | HAL_ADC_STATE_DS_OVR, + HAL_ADC_STATE_DS_BUSY); + + /* Reset all ADC error code fields */ + ADC_CLEAR_ERRORCODE(hadc); + + /* Set the DMA transfer complete callback */ + hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt; + + /* Set the DMA half transfer complete callback */ + hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt; + + /* Set the DMA error callback */ + hadc->DMA_Handle->XferErrorCallback = ADC_DMAError; + + /* Manage ADC and DMA start: ADC overrun interruption, DMA start, */ + /* ADC start (in case of SW start): */ + + /* Clear conversion flag and overrun flag */ + /* (To ensure of no unknown state from potential previous ADC */ + /* operations) */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_IRQ_FLAG_EODS | ADC_IRQ_FLAG_EOS | ADC_IRQ_FLAG_OVRDS)); + + /* Process unlocked */ + /* Unlock before starting ADC conversions: in case of potential */ + /* interruption, to let the process to ADC IRQ Handler. */ + __HAL_UNLOCK(hadc); + + /* With DMA, overrun event is always considered as an error even if + hadc->Init. Overrun is set to ADC_NEW_DATA_IS_KEPT. Therefore, + ADC_IRQ_EN_OVRDS is enabled. */ + __HAL_ADC_ENABLE_IT(hadc, ADC_IRQ_EN_OVRDS); + + /* Enable ADC DMA mode */ + LL_ADC_DMAModeDSEnable(hadc->Instance); + + /* Start the DMA channel */ + tmp_hal_status = HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DS_DATAOUT, (uint32_t)pData, + Length); + + if (tmp_hal_status != HAL_ERROR) + { + /* Enable conversion. */ + /* If software start has been selected, conversion starts immediately. */ + /* If external trigger has been selected, conversion will start at next */ + /* trigger event. */ + /* Start ADC group conversion */ + LL_ADC_StartConversion(hadc->Instance); + } + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hadc); + } + + /* Return function status */ + return tmp_hal_status; +} + + +/** + * @brief Stop ADC conversion, disable ADC DMA transfer, disable + * ADC peripheral. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* 1. Stop potential ADC conversion on going */ + LL_ADC_ContinuousModeDisable(hadc->Instance); + tmp_hal_status = ADC_ConversionStop(hadc); + + /* Disable ADC peripheral if conversions are effectively stopped */ + if (tmp_hal_status == HAL_OK) + { + + /* Abort the ADC DMA channel */ + if (hadc->DMA_Handle != NULL) + { + /* Disable ADC DMA (ADC DMA configuration of continuous requests is kept) */ + LL_ADC_DMAModeDSDisable(hadc->Instance); + + if (HAL_DMA_Abort_IT(hadc->DMA_Handle) != HAL_OK) + { + if (HAL_DMA_GetError(hadc->DMA_Handle) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hadc->ErrorCode = HAL_ADC_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hadc); + + return HAL_TIMEOUT; + } + } + } + + /* Disable the DMA channel (in case of DMA in circular mode or stop */ + /* while DMA transfer is on going) */ + if (hadc->DMA_Handle->State == HAL_DMA_STATE_BUSY) + { + tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle); + + /* Check if DMA channel effectively disabled */ + if (tmp_hal_status != HAL_OK) + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + } + } + + /* Disable ADC overrun interrupt */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IRQ_EN_OVRDS); + + /* 2. Disable the ADC peripheral */ + /* Update "tmp_hal_status" only if DMA channel disabling passed, */ + /* to keep in memory a potential failing status. */ + if (tmp_hal_status == HAL_OK) + { + tmp_hal_status = ADC_Disable(hadc); + } + else + { + (void)ADC_Disable(hadc); + } + + /* Check if ADC is effectively disabled */ + if (tmp_hal_status == HAL_OK) + { + /* Set ADC state */ + ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_DS_BUSY, HAL_ADC_STATE_READY); + } + + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Get ADC conversion result (raw value). + * @note Occurrence of flag EOS rising: + * - If sequencer is composed of 1 rank, flag EOS is equivalent + * to flag EOC. + * - If sequencer is composed of several ranks, during the scan + * sequence flag EOC only is raised, at the end of the scan sequence + * both flags EOC and EOS are raised. + * The flag EODS is rising when the Down Sampler conversion is + * completed. + * To clear those flags, either use function: + * in programming model IT: @ref HAL_ADC_IRQHandler(), in programming + * model polling: @ref HAL_ADC_PollForConversion() + * or @ref __HAL_ADC_CLEAR_FLAG(&hadc, ADC_IRQ_FLAG_EOS). + * @param hadc ADC handle + * @retval ADC conversion data + */ +uint32_t HAL_ADC_GetValue(const ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return ADC converted value */ + return LL_ADC_DSGetOutputData(hadc->Instance); +} + + +/** + * @brief Handle ADC interrupt request. + * @param hadc ADC handle + * @retval None + */ +void HAL_ADC_IRQHandler(ADC_HandleTypeDef *hadc) +{ + uint32_t overrun_error = 0UL; /* flag set if overrun occurrence has to be considered as an error */ + uint32_t tmp_ier = hadc->Instance->IRQ_ENABLE; + uint32_t tmp_isr = LL_ADC_GetActiveFlags(hadc->Instance); + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* ====== Check ADC end of unitary conversion sequence conversions ===== */ + if ((((tmp_isr & ADC_IRQ_FLAG_EODS) == ADC_IRQ_FLAG_EODS) && ((tmp_ier & ADC_IRQ_EN_EODS) == ADC_IRQ_EN_EODS)) || + (((tmp_isr & ADC_IRQ_FLAG_EOS) == ADC_IRQ_FLAG_EOS) && ((tmp_ier & ADC_IRQ_EN_EOS) == ADC_IRQ_EN_EOS)) || + (((tmp_isr & ADC_IRQ_FLAG_EOC) == ADC_IRQ_FLAG_EOC) && ((tmp_ier & ADC_IRQ_EN_EOC) == ADC_IRQ_EN_EOC))) + { + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_DS_EOC); + } + + /* Carry on if continuous mode is disabled */ + if (!LL_ADC_IsContinuousModeEnabled(hadc->Instance)) + { + /* If End of Sequence is reached, disable interrupts */ + if (__HAL_ADC_GET_FLAG(hadc, ADC_IRQ_FLAG_EOS)) + { + /* Disable ADC end of sequence conversion interrupt */ + /* Note: Overrun interrupt was enabled with EOC interrupt in */ + /* HAL_Start_IT(), but is not disabled here because can be used */ + /* by overrun IRQ process below. */ + __HAL_ADC_DISABLE_IT(hadc, ADC_IRQ_EN_EODS | ADC_IRQ_EN_EOS | ADC_IRQ_EN_EOC); + + /* Set ADC state */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_DS_BUSY); + + SET_BIT(hadc->State, HAL_ADC_STATE_READY); + } + } + + /* Conversion complete callback */ + /* Note: Into callback function "HAL_ADC_ConvCpltCallback()", */ + /* to determine if conversion has been triggered from EOC or EOS, */ + /* possibility to use: */ + /* " if (__HAL_ADC_GET_FLAG(&hadc, ADC_IRQ_FLAG_EOS)) " */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear conversion flag */ + /* Note: in case of overrun set to ADC_NEW_DATA_IS_LOST, end of */ + /* conversion flags clear induces the release of the preserved data.*/ + /* Therefore, if the preserved data value is needed, it must be */ + /* read preliminarily into HAL_ADC_ConvCpltCallback(). */ + __HAL_ADC_CLEAR_FLAG(hadc, (ADC_IRQ_FLAG_EODS | ADC_IRQ_FLAG_EOS | ADC_IRQ_FLAG_EOC)); + } + + /* ========== Check Analog watchdog 1 flag ========== */ + if (((tmp_isr & ADC_IRQ_FLAG_AWD1) == ADC_IRQ_FLAG_AWD1) && ((tmp_ier & ADC_IRQ_FLAG_AWD1) == ADC_IRQ_FLAG_AWD1)) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Level out of window 1 callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->LevelOutOfWindowCallback(hadc); +#else + HAL_ADC_LevelOutOfWindowCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + + /* Clear ADC analog watchdog flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_IRQ_FLAG_AWD1); + } + + /* ========== Check Overrun flag ========== */ + if (((tmp_isr & ADC_IRQ_FLAG_OVRDS) == ADC_IRQ_FLAG_OVRDS) && ((tmp_ier & ADC_IRQ_EN_OVRDS) == ADC_IRQ_EN_OVRDS)) + { + /* If overrun is set to overwrite previous data (default setting), */ + /* overrun event is not considered as an error. */ + /* Exception for usage with DMA overrun event always considered as an */ + /* error. */ + if (hadc->Init.Overrun == ADC_NEW_DATA_IS_LOST) + { + overrun_error = 1UL; + } + else + { + /* Check DMA configuration */ + if (LL_ADC_IsDMAModeDSEnabled(hadc->Instance)) + { + overrun_error = 1UL; + } + } + + if (overrun_error == 1UL) + { + /* Change ADC state to error state */ + SET_BIT(hadc->State, HAL_ADC_STATE_DS_OVR); + + /* Set ADC error code to overrun */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR); + + /* Error callback */ + /* Note: In case of overrun, ADC conversion data is preserved until */ + /* flag OVR is reset. */ + /* Therefore, old ADC conversion data can be retrieved in */ + /* function "HAL_ADC_ErrorCallback()". */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + + /* Clear ADC overrun flag */ + __HAL_ADC_CLEAR_FLAG(hadc, ADC_IRQ_FLAG_OVRDS); + } + +} + + +/** + * @brief Conversion complete callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvCpltCallback must be implemented in the user file. + */ +} + + +/** + * @brief Conversion DMA half-transfer callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ConvHalfCpltCallback must be implemented in the user file. + */ +} + + +/** + * @brief Analog watchdog callback in non-blocking mode. + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_LevelOutOfWindowCallback must be implemented in the user file. + */ +} + + +/** + * @brief ADC error callback in non-blocking mode + * (ADC conversion with interruption or transfer by DMA). + * @note In case of error due to overrun when using ADC with DMA transfer + * (HAL ADC handle parameter "ErrorCode" to state "HAL_ADC_ERROR_OVR"): + * - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()". + * - If needed, restart a new ADC conversion using function + * "HAL_ADC_Start_DMA()" + * (this function is also clearing overrun flag) + * @param hadc ADC handle + * @retval None + */ +__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hadc); + + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_ADC_ErrorCallback must be implemented in the user file. + */ +} + + +/** + * @} + */ +/** @defgroup ADC_Exported_Functions_Group6 Analog Timing Control functions + * @brief Configure analog related timing parameters +@verbatim + =============================================================================== + ##### Analog Timing Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the synchronisation between SMPS and ADC start of conversion + (+) Configure the ADC LDO delay + +@endverbatim + * @{ + */ + +/** + * @brief Enable the synchronization of the ADC start conversion with + * a pulse generated by the SMPS. + * @note The synchronization should only be enabled when using the SMPS with + * an ADC clock different from 32 MHz. + * @param hadc ADC handle + * @return HAL status + */ +HAL_StatusTypeDef HAL_ADC_SMPSSyncEnable(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + LL_ADC_SMPSSyncEnable(hadc->Instance); + + /* Process locked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @brief Disable the synchronization of the ADC start conversion with + * a pulse generated by the SMPS. + * @note The synchronization should only be enabled when using the SMPS with + * an ADC clock different from 32 MHz. + * @param hadc ADC handle + * @return HAL status + */ +HAL_StatusTypeDef HAL_ADC_SMPSSyncDisable(ADC_HandleTypeDef *hadc) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Process locked */ + __HAL_LOCK(hadc); + + LL_ADC_SMPSSyncDisable(hadc->Instance); + + /* Process locked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @} + */ + + +/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels on a conversion sequence + (+) Configure the analog watchdog + +@endverbatim + * @{ + */ + +/** + * @brief Configure a channel to be assigned to ADC conversion sequence. + * @param hadc ADC handle + * @param sConfigChannel Structure of ADC channel configuration and position in + * ADC conversion sequence. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, const ADC_ChannelConfTypeDef *sConfigChannel) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + uint32_t tmp_gain; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_RANK(sConfigChannel->Rank)); + assert_param(IS_ADC_VOLTAGE_RANGE(sConfigChannel->VoltRange)); + assert_param(IS_ADC_CHANNEL(sConfigChannel->Channel)); + + assert_param(IS_ADC_CALIBRATION_POINT(sConfigChannel->CalibrationPoint.Number)); + assert_param(IS_ADC_CALIBRATION_GAIN(sConfigChannel->CalibrationPoint.Gain)); + assert_param(IS_ADC_CALIBRATION_OFFSET(sConfigChannel->CalibrationPoint.Offset)); + + /* Process locked */ + __HAL_LOCK(hadc); + + if (LL_ADC_IsConversionOngoing(hadc->Instance) == 0UL) + { + LL_ADC_SetSequencerRanks(hadc->Instance, sConfigChannel->Rank, sConfigChannel->Channel); + if ((sConfigChannel->Channel != ADC_CHANNEL_TEMPSENSOR) + && (sConfigChannel->Channel != ADC_CHANNEL_VBAT)) + { + LL_ADC_SetChannelVoltageRange(hadc->Instance, sConfigChannel->Channel, sConfigChannel->VoltRange); + } + } + /* If a conversion is on going no update could be done on */ + /* neither of the channel configuration structure parameters. */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + + if (sConfigChannel->CalibrationPoint.Number != ADC_CALIB_NONE) + { + if (sConfigChannel->CalibrationPoint.Gain != 0UL) + { + tmp_gain = sConfigChannel->CalibrationPoint.Gain; + } + else if ((sConfigChannel->VoltRange == ADC_VIN_RANGE_1V2) + || (sConfigChannel->Channel == ADC_CHANNEL_TEMPSENSOR)) + { + /* 1.2V mode: [calibrated gain = 0.96, gain clamped at 1] */ + tmp_gain = 0xFFFUL; + } + else if (sConfigChannel->VoltRange == ADC_VIN_RANGE_2V4) + { + /* 2.4V mode: [calibrated gain = 1/2] */ + tmp_gain = 0x7FFUL; + } + else /* ADC_VIN_RANGE_3V6 */ + { + /* 3.6V mode: [calibrated gain = 1/3] */ + tmp_gain = 0x555UL; + } + LL_ADC_ConfigureCalibPoint(hadc->Instance, sConfigChannel->CalibrationPoint.Number, + tmp_gain, sConfigChannel->CalibrationPoint.Offset); + + switch (sConfigChannel->Channel) + { + case ADC_CHANNEL_VINM0: + case ADC_CHANNEL_VINM1: + case ADC_CHANNEL_VINM2: + case ADC_CHANNEL_VINM3: + { + LL_ADC_SetCalibPointForSingleNeg(hadc->Instance, sConfigChannel->CalibrationPoint.Number, + sConfigChannel->VoltRange); + break; + } + case ADC_CHANNEL_VINP0: + case ADC_CHANNEL_VINP1: + case ADC_CHANNEL_VINP2: + case ADC_CHANNEL_VINP3: + { + LL_ADC_SetCalibPointForSinglePos(hadc->Instance, sConfigChannel->CalibrationPoint.Number, + sConfigChannel->VoltRange); + break; + } + case ADC_CHANNEL_VINP0_VINM0: + case ADC_CHANNEL_VINP1_VINM1: + case ADC_CHANNEL_VINP2_VINM2: + case ADC_CHANNEL_VINP3_VINM3: + { + LL_ADC_SetCalibPointForDiff(hadc->Instance, sConfigChannel->CalibrationPoint.Number, sConfigChannel->VoltRange); + break; + } + case ADC_CHANNEL_VBAT: + { + LL_ADC_SetCalibPointForSingleNeg(hadc->Instance, sConfigChannel->CalibrationPoint.Number, + LL_ADC_VIN_RANGE_3V6); + break; + } + case ADC_CHANNEL_TEMPSENSOR: + { + LL_ADC_SetCalibPointForSinglePos(hadc->Instance, sConfigChannel->CalibrationPoint.Number, + LL_ADC_VIN_RANGE_1V2); + break; + } + default: + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + break; + } + } + } + else + { + /* Nothing to do */ + __NOP(); + } + + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + + +/** + * @brief Configure the watchdog. + * @note Possibility to update parameters on the fly: + * This function initializes the watchdog, successive + * calls to this function can be used to reconfigure some parameters + * of structure "ADC_AnalogWDGConfTypeDef" on the fly, without + * resetting the ADC. + * The setting of these parameters is conditioned to ADC state. + * @param hadc ADC handle + * @param ConfigWatchdog Structure of ADC watchdog configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, const ADC_AnalogWDGConfTypeDef *ConfigWatchdog) +{ + HAL_StatusTypeDef tmp_hal_status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + assert_param(IS_ADC_AWD_CHANNEL(ConfigWatchdog->ChannelMask)); + assert_param(IS_ADC_AWD_EVENT_TYPE(ConfigWatchdog->EventType)); + + /* Process locked */ + __HAL_LOCK(hadc); + + /* Check if there is a conversion on going */ + if (LL_ADC_IsConversionOngoing(hadc->Instance) == 0UL) + { + /* Configure the thresholds */ + LL_ADC_ConfigureAWDThresholds(hadc->Instance, ConfigWatchdog->LowThreshold, ConfigWatchdog->HighThreshold); + + /* Set the channels mask */ + LL_ADC_SetAWDInputChannels(hadc->Instance, ConfigWatchdog->ChannelMask); + + /* Update state, clear previous result related to watchdog */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD1); + + /* Clear flag ADC analog watchdog */ + /* Note: Flag cleared Clear the ADC Analog watchdog flag to be ready */ + /* to use for HAL_ADC_IRQHandler() or HAL_ADC_PollForEvent() */ + /* (in case left enabled by previous ADC operations). */ + LL_ADC_ClearFlag_AWD(hadc->Instance); + + /* Configure ADC analog watchdog interrupt */ + if (ConfigWatchdog->EventType == ADC_AWD_EVENT_INTERRUPT) + { + LL_ADC_EnableIT_AWD(hadc->Instance); + } + else + { + LL_ADC_DisableIT_AWD(hadc->Instance); + } + } + /* If a conversion is on going , no update could be done */ + else + { + /* Update ADC state machine to error */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG); + + tmp_hal_status = HAL_ERROR; + } + /* Process unlocked */ + __HAL_UNLOCK(hadc); + + /* Return function status */ + return tmp_hal_status; +} + +/** + * @} + */ + +/** @defgroup ADC_Exported_Functions_Group7 Peripheral State functions + * @brief ADC Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral state and errors functions ##### + =============================================================================== + [..] + This subsection provides functions to get in run-time the status of the + peripheral. + (+) Check the ADC state + (+) Check the ADC error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the ADC handle state. + * @note ADC state machine is managed by bitfields, ADC status must be + * compared with states bits. + * For example: + * " if ((HAL_ADC_GetState(hadc) & HAL_ADC_STATE_DS_BUSY) != 0UL) " + * " if ((HAL_ADC_GetState(hadc) & HAL_ADC_STATE_AWD1) != 0UL) " + * @param hadc ADC handle + * @retval ADC handle state (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetState(const ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Return ADC handle state */ + return hadc->State; +} + +/** + * @brief Return the ADC error code. + * @param hadc ADC handle + * @retval ADC error code (bitfield on 32 bits) + */ +uint32_t HAL_ADC_GetError(const ADC_HandleTypeDef *hadc) +{ + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + return hadc->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup ADC_Private_Functions ADC Private Functions + * @{ + */ + +/** + * @brief Stop ADC conversion. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_ConversionStop(ADC_HandleTypeDef *hadc) +{ + uint32_t is_conversion_on; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance)); + + /* Verification if ADC is not already stopped to bypass this function if */ + /* not needed. */ + is_conversion_on = LL_ADC_IsConversionOngoing(hadc->Instance); + if (is_conversion_on != 0UL) + { + /* Stop ADC conversion */ + LL_ADC_StopConversion(hadc->Instance); + } + + /* Return HAL status */ + return HAL_OK; +} + + +/** + * @brief Enable the selected ADC. + * @note Prerequisite condition to use this function: ADC must be disabled + * and voltage regulator must be enabled (done into HAL_ADC_Init()). + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Enable(ADC_HandleTypeDef *hadc) +{ + /* ADC enable */ + if (LL_ADC_IsEnabled(hadc->Instance) == 0UL) + { + /* Enable the ADC peripheral */ + LL_ADC_Enable(hadc->Instance); + } + + /* Return HAL status */ + return HAL_OK; +} + + +/** + * @brief Disable the selected ADC. + * @note Prerequisite condition to use this function: ADC conversions must be + * stopped. + * @param hadc ADC handle + * @retval HAL status. + */ +HAL_StatusTypeDef ADC_Disable(ADC_HandleTypeDef *hadc) +{ + /* Verification if ADC is not already disabled: */ + if ((LL_ADC_IsEnabled(hadc->Instance) != 0UL)) + { + /* Disable the ADC peripheral */ + LL_ADC_Disable(hadc->Instance); + } + + /* Return HAL status */ + return HAL_OK; +} + +/** + * @brief DMA transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Update state machine on conversion status if not in error state */ + if ((hadc->State & (HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA)) == 0UL) + { + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_DS_EOC); + + /* Is it the end of the sequence ? */ + if ((hadc->Instance->IRQ_STATUS & ADC_IRQ_FLAG_EOS) != 0UL) + { + /* Is it in continuous mode */ + if (LL_ADC_IsContinuousModeEnabled(hadc->Instance) == 0UL) + { + /* It is not bit is not set, no more conversions expected */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_DS_BUSY); + } + } + else + { + /* DMA End of Transfer interrupt was triggered but conversions sequence + is not over. If DMA_DS_ENA is set to 0, conversions are stopped. */ + if (LL_ADC_IsDMAModeDSEnabled(hadc->Instance) == 0UL) + { + /* DMA_DS_ENA bit is not set, conversions are stopped. */ + CLEAR_BIT(hadc->State, HAL_ADC_STATE_DS_BUSY); + } + } + + /* Conversion complete callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvCpltCallback(hadc); +#else + HAL_ADC_ConvCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else /* DMA and-or internal error occurred */ + { + if ((hadc->State & HAL_ADC_STATE_ERROR_INTERNAL) != 0UL) + { + /* Call HAL ADC Error Callback function */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ + } + else + { + /* Call ADC DMA error callback */ + hadc->DMA_Handle->XferErrorCallback(hdma); + } + } +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Half conversion callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ConvHalfCpltCallback(hadc); +#else + HAL_ADC_ConvHalfCpltCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void ADC_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Retrieve ADC handle corresponding to current DMA handle */ + ADC_HandleTypeDef *hadc = (ADC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set ADC state */ + SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_DMA); + + /* Set ADC error code to DMA error */ + SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_DMA); + + /* Error callback */ +#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1) + hadc->ErrorCallback(hadc); +#else + HAL_ADC_ErrorCallback(hadc); +#endif /* USE_HAL_ADC_REGISTER_CALLBACKS */ +} + + +/** + * @} + */ + +#endif /* HAL_ADC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_comp.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_comp.c new file mode 100644 index 0000000000..46fda68bde --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_comp.c @@ -0,0 +1,902 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_comp.c + * @author MCD Application Team + * @brief COMP HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the COMP peripheral: + * + Initialization and de-initialization functions + * + Peripheral control functions + * + Peripheral state functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### COMP Peripheral features ##### + ============================================================================== + + [..] + The STM32WL3x device family integrates one analog comparator instance: + COMP1. + (#) Comparators input minus (inverting input) and input plus (non inverting input) + can be set to internal references or to GPIO pins + (refer to GPIO list in reference manual). + + (#) Comparators output level is available using HAL_COMP_GetOutputLevel() + and can be redirected to other peripherals: GPIO pins (in mode + alternate functions for comparator), timers. + (refer to GPIO list in reference manual). + + (#) The comparators have interrupt capability through the EXTI controller + with wake-up from sleep and stop modes. + + From the corresponding IRQ handler, the right interrupt source can be retrieved + using macro __HAL_COMP_COMPx_EXTI_GET_FLAG(). + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions to configure and program the comparator instances + of STM32WL3x devices. + + To use the comparator, perform the following steps: + + (#) Initialize the COMP low level resources by implementing the HAL_COMP_MspInit(): + (++) Configure the GPIO connected to comparator inputs plus and minus in analog mode + using HAL_GPIO_Init(). + (++) If needed, configure the GPIO connected to comparator output in alternate function mode + using HAL_GPIO_Init(). + (++) If required enable the COMP interrupt by configuring and enabling EXTI line in Interrupt mode and + selecting the desired sensitivity level using HAL_GPIO_Init() function. After that enable the comparator + interrupt vector using HAL_NVIC_EnableIRQ() function. + + (#) Configure the comparator using HAL_COMP_Init() function: + (++) Select the input minus (inverting input) + (++) Select the input plus (non-inverting input) + (++) Select the hysteresis + (++) Select the blanking source + (++) Select the output polarity + (++) Select the power mode + + -@@- HAL_COMP_Init() calls internally __HAL_RCC_SYSCFG_CLK_ENABLE() + to enable internal control clock of the comparators. + However, this is a legacy strategy. In future STM32 families, + COMP clock enable must be implemented by user in "HAL_COMP_MspInit()". + Therefore, for compatibility anticipation, it is recommended to + implement __HAL_RCC_SYSCFG_CLK_ENABLE() in "HAL_COMP_MspInit()". + + (#) Reconfiguration on-the-fly of comparator can be done by calling again + function HAL_COMP_Init() with new input structure parameters values. + + (#) Enable the comparator using HAL_COMP_Start() function. + + (#) Use HAL_COMP_TriggerCallback() or HAL_COMP_GetOutputLevel() functions + to manage comparator outputs (events and output level). + + (#) Disable the comparator using HAL_COMP_Stop() function. + + (#) De-initialize the comparator using HAL_COMP_DeInit() function. + + (#) For safety purpose, comparator configuration can be locked using HAL_COMP_Lock() function. + The only way to unlock the comparator is a device hardware reset. + + *** Callback registration *** + ============================================= + [..] + + The compilation flag USE_HAL_COMP_REGISTER_CALLBACKS, when set to 1, + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_COMP_RegisterCallback() + to register an interrupt callback. + [..] + + Function HAL_COMP_RegisterCallback() allows to register following callbacks: + (+) TriggerCallback : callback for COMP trigger. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + + Use function HAL_COMP_UnRegisterCallback to reset a callback to the default + weak function. + [..] + + HAL_COMP_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TriggerCallback : callback for COMP trigger. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + + By default, after the HAL_COMP_Init() and when the state is HAL_COMP_STATE_RESET + all callbacks are set to the corresponding weak functions: + example HAL_COMP_TriggerCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_COMP_Init()/ HAL_COMP_DeInit() only when + these callbacks are null (not registered beforehand). + [..] + + If MspInit or MspDeInit are not null, the HAL_COMP_Init()/ HAL_COMP_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + + Callbacks can be registered/unregistered in HAL_COMP_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_COMP_STATE_READY or HAL_COMP_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + [..] + + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_COMP_RegisterCallback() before calling HAL_COMP_DeInit() + or HAL_COMP_Init() function. + [..] + + When the compilation flag USE_HAL_COMP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +#ifdef HAL_COMP_MODULE_ENABLED + +#if defined (COMP1) + +/** @defgroup COMP COMP + * @brief COMP HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup COMP_Private_Constants + * @{ + */ + +/* Delay for COMP startup time. */ +/* Note: Delay required to reach propagation delay specification. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART"). */ +/* Unit: us */ +#define COMP_DELAY_STARTUP_US (80UL) /*!< Delay for COMP startup time */ + +/* Delay for COMP voltage scaler stabilization time. */ +/* Literal set to maximum value (refer to device datasheet, */ +/* parameter "tSTART_SCALER"). */ +/* Unit: us */ +#define COMP_DELAY_VOLTAGE_SCALER_STAB_US (200UL) /*!< Delay for COMP voltage scaler stabilization time */ + +#define COMP_OUTPUT_LEVEL_BITOFFSET_POS (30UL) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup COMP_Exported_Functions COMP Exported Functions + * @{ + */ + +/** @defgroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions + * @brief Initialization and de-initialization functions. + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions to initialize and de-initialize comparators + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the COMP according to the specified + * parameters in the COMP_InitTypeDef and initialize the associated handle. + * @note If the selected comparator is locked, initialization can't be performed. + * To unlock the configuration, perform a system reset. + * @param hcomp COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp) +{ + uint32_t tmp_csr; + uint32_t comp_voltage_scaler_initialized; /* Value "0" if comparator voltage scaler is not initialized */ + __IO uint32_t wait_loop_index = 0UL; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if (hcomp == NULL) + { + status = HAL_ERROR; + } + else if (__HAL_COMP_IS_LOCKED(hcomp)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameters */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + assert_param(IS_COMP_INPUT_PLUS(hcomp->Instance, hcomp->Init.InputPlus)); + assert_param(IS_COMP_INPUT_MINUS(hcomp->Instance, hcomp->Init.InputMinus)); + assert_param(IS_COMP_OUTPUTPOL(hcomp->Init.OutputPol)); + assert_param(IS_COMP_POWERMODE(hcomp->Init.Mode)); + assert_param(IS_COMP_HYSTERESIS(hcomp->Init.Hysteresis)); + assert_param(IS_COMP_BLANKINGSRC_INSTANCE(hcomp->Instance, hcomp->Init.BlankingSrce)); + assert_param(IS_COMP_TRIGGERMODE(hcomp->Init.TriggerMode)); + + if (hcomp->State == HAL_COMP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcomp->Lock = HAL_UNLOCKED; + + /* Set COMP error code to none */ + COMP_CLEAR_ERRORCODE(hcomp); + +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) + /* Init the COMP Callback settings */ + hcomp->TriggerCallback = HAL_COMP_TriggerCallback; /* Legacy weak callback */ + + if (hcomp->MspInitCallback == NULL) + { + hcomp->MspInitCallback = HAL_COMP_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + /* Note: Internal control clock of the comparators must */ + /* be enabled in "HAL_COMP_MspInit()" */ + /* using "__HAL_RCC_SYSCFG_CLK_ENABLE()". */ + hcomp->MspInitCallback(hcomp); +#else + /* Init the low level hardware */ + /* Note: Internal control clock of the comparators must */ + /* be enabled in "HAL_COMP_MspInit()" */ + /* using "__HAL_RCC_SYSCFG_CLK_ENABLE()". */ + HAL_COMP_MspInit(hcomp); +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + } + + /* Memorize voltage scaler state before initialization */ + comp_voltage_scaler_initialized = READ_BIT(hcomp->Instance->CSR, COMP_CSR_SCALEN); + + /* Set COMP parameters */ + tmp_csr = (hcomp->Init.InputMinus + | hcomp->Init.InputPlus + | hcomp->Init.BlankingSrce + | hcomp->Init.Hysteresis + | hcomp->Init.OutputPol + | hcomp->Init.Mode + ); + + /* Set parameters in COMP register */ + /* Note: Update all bits except read-only, lock and enable bits */ + MODIFY_REG(hcomp->Instance->CSR, + COMP_CSR_PWRMODE | COMP_CSR_INMSEL | COMP_CSR_INPSEL | + COMP_CSR_POLARITY | COMP_CSR_HYST | + COMP_CSR_BLANKING | COMP_CSR_BRGEN | COMP_CSR_SCALEN, + tmp_csr + ); + + /* Delay for COMP scaler bridge voltage stabilization */ + /* Apply the delay if voltage scaler bridge is required and not already enabled */ + if ((READ_BIT(hcomp->Instance->CSR, COMP_CSR_SCALEN) != 0UL) && + (comp_voltage_scaler_initialized == 0UL)) + { + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((COMP_DELAY_VOLTAGE_SCALER_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + + + LL_SYSCFG_MR_SUBG_INTAI_SetTrigger(hcomp->Init.TriggerMode, LL_SYSCFG_MR_SUBG_COMPOUT_EVENT); + + /* Clear COMP EXTI pending bit (if any) */ + LL_SYSCFG_MR_SUBG_INTAI_ClearInterrupt(LL_SYSCFG_MR_SUBG_COMPOUT_EVENT); + + /* Enable Internal asynchronous Interrupt */ + LL_SYSCFG_MR_SUBG_INTAI_EnableIT(LL_SYSCFG_MR_SUBG_COMPOUT_EVENT); + + + /* Set HAL COMP handle state */ + /* Note: Transition from state reset to state ready, */ + /* otherwise (coming from state ready or busy) no state update. */ + if (hcomp->State == HAL_COMP_STATE_RESET) + { + hcomp->State = HAL_COMP_STATE_READY; + } + } + + return status; +} + +/** + * @brief DeInitialize the COMP peripheral. + * @note Deinitialization cannot be performed if the COMP configuration is locked. + * To unlock the configuration, perform a system reset. + * @param hcomp COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_DeInit(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if (hcomp == NULL) + { + status = HAL_ERROR; + } + else if (__HAL_COMP_IS_LOCKED(hcomp)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Set COMP_CSR register to reset value */ + WRITE_REG(hcomp->Instance->CSR, 0x00000000UL); + +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) + if (hcomp->MspDeInitCallback == NULL) + { + hcomp->MspDeInitCallback = HAL_COMP_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, RCC clock, NVIC */ + hcomp->MspDeInitCallback(hcomp); +#else + /* DeInit the low level hardware: GPIO, RCC clock, NVIC */ + HAL_COMP_MspDeInit(hcomp); +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + + /* Set HAL COMP handle state */ + hcomp->State = HAL_COMP_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hcomp); + } + + return status; +} + +/** + * @brief Initialize the COMP MSP. + * @param hcomp COMP handle + * @retval None + */ +__weak void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcomp); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_COMP_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the COMP MSP. + * @param hcomp COMP handle + * @retval None + */ +__weak void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcomp); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_COMP_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User COMP Callback + * To be used instead of the weak predefined callback + * @param hcomp Pointer to a COMP_HandleTypeDef structure that contains + * the configuration information for the specified COMP. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_COMP_TRIGGER_CB_ID Trigger callback ID + * @arg @ref HAL_COMP_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_COMP_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID, + pCOMP_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_COMP_STATE_READY == hcomp->State) + { + switch (CallbackID) + { + case HAL_COMP_TRIGGER_CB_ID : + hcomp->TriggerCallback = pCallback; + break; + + case HAL_COMP_MSPINIT_CB_ID : + hcomp->MspInitCallback = pCallback; + break; + + case HAL_COMP_MSPDEINIT_CB_ID : + hcomp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_COMP_STATE_RESET == hcomp->State) + { + switch (CallbackID) + { + case HAL_COMP_MSPINIT_CB_ID : + hcomp->MspInitCallback = pCallback; + break; + + case HAL_COMP_MSPDEINIT_CB_ID : + hcomp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a COMP Callback + * COMP callback is redirected to the weak predefined callback + * @param hcomp Pointer to a COMP_HandleTypeDef structure that contains + * the configuration information for the specified COMP. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_COMP_TRIGGER_CB_ID Trigger callback ID + * @arg @ref HAL_COMP_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_COMP_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_UnRegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_COMP_STATE_READY == hcomp->State) + { + switch (CallbackID) + { + case HAL_COMP_TRIGGER_CB_ID : + hcomp->TriggerCallback = HAL_COMP_TriggerCallback; /* Legacy weak callback */ + break; + + case HAL_COMP_MSPINIT_CB_ID : + hcomp->MspInitCallback = HAL_COMP_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_COMP_MSPDEINIT_CB_ID : + hcomp->MspDeInitCallback = HAL_COMP_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_COMP_STATE_RESET == hcomp->State) + { + switch (CallbackID) + { + case HAL_COMP_MSPINIT_CB_ID : + hcomp->MspInitCallback = HAL_COMP_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_COMP_MSPDEINIT_CB_ID : + hcomp->MspDeInitCallback = HAL_COMP_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcomp->ErrorCode |= HAL_COMP_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group2 Start-Stop operation functions + * @brief Start-Stop operation functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Start a comparator instance. + (+) Stop a comparator instance. + +@endverbatim + * @{ + */ + +/** + * @brief Start the comparator. + * @param hcomp COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp) +{ + __IO uint32_t wait_loop_index = 0UL; + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if (hcomp == NULL) + { + status = HAL_ERROR; + } + else if (__HAL_COMP_IS_LOCKED(hcomp)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + if (hcomp->State == HAL_COMP_STATE_READY) + { + /* Enable the selected comparator */ + SET_BIT(hcomp->Instance->CSR, COMP_CSR_EN); + + /* Set HAL COMP handle state */ + hcomp->State = HAL_COMP_STATE_BUSY; + + /* Delay for COMP startup time */ + /* Wait loop initialization and execution */ + /* Note: Variable divided by 2 to compensate partially */ + /* CPU processing cycles, scaling in us split to not */ + /* exceed 32 bits register capacity and handle low frequency. */ + wait_loop_index = ((COMP_DELAY_STARTUP_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))); + while (wait_loop_index != 0UL) + { + wait_loop_index--; + } + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Stop the comparator. + * @param hcomp COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if (hcomp == NULL) + { + status = HAL_ERROR; + } + else if (__HAL_COMP_IS_LOCKED(hcomp)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Check compliant states: HAL_COMP_STATE_READY or HAL_COMP_STATE_BUSY */ + /* (all states except HAL_COMP_STATE_RESET and except locked status. */ + if (hcomp->State != HAL_COMP_STATE_RESET) + { + /* Disable the selected comparator */ + CLEAR_BIT(hcomp->Instance->CSR, COMP_CSR_EN); + + /* Set HAL COMP handle state */ + hcomp->State = HAL_COMP_STATE_READY; + } + else + { + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Comparator IRQ handler. + * @param hcomp COMP handle + * @retval None + */ +void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp) +{ + /* Check COMP EXTI flag */ + if (LL_SYSCFG_MR_SUBG_INTAI_IsInterruptPending(LL_SYSCFG_MR_SUBG_COMPOUT_EVENT)) + { + /* Clear COMP EXTI line pending bit */ + LL_SYSCFG_MR_SUBG_INTAI_ClearInterrupt(LL_SYSCFG_MR_SUBG_COMPOUT_EVENT); + + /* COMP trigger user callback */ +#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1) + hcomp->TriggerCallback(hcomp); +#else + HAL_COMP_TriggerCallback(hcomp); +#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */ + } +} + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group3 Peripheral Control functions + * @brief Management functions. + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the comparators. + +@endverbatim + * @{ + */ + +/** + * @brief Lock the selected comparator configuration. + * @note A system reset is required to unlock the comparator configuration. + * @note Locking the comparator from reset state is possible + * if __HAL_RCC_SYSCFG_CLK_ENABLE() is being called before. + * @param hcomp COMP handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the COMP handle allocation and lock status */ + if (hcomp == NULL) + { + status = HAL_ERROR; + } + else if (__HAL_COMP_IS_LOCKED(hcomp)) + { + status = HAL_ERROR; + } + else + { + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Set HAL COMP handle state */ + switch (hcomp->State) + { + case HAL_COMP_STATE_RESET: + hcomp->State = HAL_COMP_STATE_RESET_LOCKED; + break; + case HAL_COMP_STATE_READY: + hcomp->State = HAL_COMP_STATE_READY_LOCKED; + break; + default: /* HAL_COMP_STATE_BUSY */ + hcomp->State = HAL_COMP_STATE_BUSY_LOCKED; + break; + } + + } + + if (status == HAL_OK) + { + /* Set the lock bit corresponding to selected comparator */ + __HAL_COMP_LOCK(hcomp); + } + + return status; +} + +/** + * @brief Return the output level (high or low) of the selected comparator. + * The output level depends on the selected polarity. + * If the polarity is not inverted: + * - Comparator output is low when the input plus is at a lower + * voltage than the input minus + * - Comparator output is high when the input plus is at a higher + * voltage than the input minus + * If the polarity is inverted: + * - Comparator output is high when the input plus is at a lower + * voltage than the input minus + * - Comparator output is low when the input plus is at a higher + * voltage than the input minus + * @param hcomp COMP handle + * @retval Returns the selected comparator output level: + * @arg COMP_OUTPUT_LEVEL_LOW + * @arg COMP_OUTPUT_LEVEL_HIGH + * + */ +uint32_t HAL_COMP_GetOutputLevel(const COMP_HandleTypeDef *hcomp) +{ + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + return (uint32_t)(READ_BIT(hcomp->Instance->CSR, COMP_CSR_VALUE) + >> COMP_OUTPUT_LEVEL_BITOFFSET_POS); +} + +/** + * @brief Comparator trigger callback. + * @param hcomp COMP handle + * @retval None + */ +__weak void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcomp); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_COMP_TriggerCallback should be implemented in the user file + */ +} + + +/** + * @} + */ + +/** @defgroup COMP_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the COMP handle state. + * @param hcomp COMP handle + * @retval HAL state + */ +HAL_COMP_StateTypeDef HAL_COMP_GetState(const COMP_HandleTypeDef *hcomp) +{ + /* Check the COMP handle allocation */ + if (hcomp == NULL) + { + return HAL_COMP_STATE_RESET; + } + + /* Check the parameter */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + /* Return HAL COMP handle state */ + return hcomp->State; +} + +/** + * @brief Return the COMP error code. + * @param hcomp COMP handle + * @retval COMP error code + */ +uint32_t HAL_COMP_GetError(const COMP_HandleTypeDef *hcomp) +{ + /* Check the parameters */ + assert_param(IS_COMP_ALL_INSTANCE(hcomp->Instance)); + + return hcomp->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* COMP1 */ + +#endif /* HAL_COMP_MODULE_ENABLED */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_cortex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_cortex.c new file mode 100644 index 0000000000..f1e7f6b59c --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_cortex.c @@ -0,0 +1,385 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_cortex.c + * @author MCD Application Team + * @brief CORTEX HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the CORTEX: + * + Initialization and Configuration functions + * + Peripheral Control functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** How to configure Interrupts using CORTEX HAL driver *** + =========================================================== + [..] + This section provides functions allowing to configure the NVIC interrupts (IRQ). + The Cortex M0+ exceptions are managed by CMSIS functions. + (#) Enable and Configure the priority of the selected IRQ Channels. + The priority can be 0..3. + + -@- Lower priority values gives higher priority. + -@- Priority Order: + (#@) Lowest priority. + (#@) Lowest hardware priority (IRQn position). + + (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority() + + (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ() + + -@- Negative value of IRQn_Type are not allowed. + + *** How to configure Systick using CORTEX HAL driver *** + ======================================================== + [..] + Setup SysTick Timer for time base. + + (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which + is a CMSIS function that: + (++) Configures the SysTick Reload register with value passed as function parameter. + (++) Configures the SysTick IRQ priority to the lowest value (0x03). + (++) Resets the SysTick Counter register. + (++) Enables the SysTick Interrupt. + (++) Starts the SysTick Counter. + + (+) You can change the SysTick IRQ priority by calling the + HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function + call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. + + (+) To adjust the SysTick time base, use the following formula: + + Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) + (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function + (++) Reload Value should not exceed 0xFFFFFF + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup CORTEX + * @{ + */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup CORTEX_Exported_Functions + * @{ + */ + + +/** @addtogroup CORTEX_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This section provides the CORTEX HAL driver functions allowing to configure Interrupts + SysTick functionalities + +@endverbatim + * @{ + */ + +/** + * @brief Sets the priority of an interrupt. + * @param IRQn External interrupt number . + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to stm32wl3x.h file) + * @param PreemptPriority The preemption priority for the IRQn channel. + * This parameter can be a value between 0 and 3. + * A lower priority value indicates a higher priority + * @param SubPriority the subpriority level for the IRQ channel. + * with stm32wl3x devices, this parameter is a dummy value and it is ignored, because + * no subpriority supported in Cortex M0+ based products. + * @retval None + */ +void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); + NVIC_SetPriority(IRQn, PreemptPriority); +} + +/** + * @brief Enable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file) + * @retval None + */ +void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Enable interrupt */ + NVIC_EnableIRQ(IRQn); +} + +/** + * @brief Disable a device specific interrupt in the NVIC interrupt controller. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file) + * @retval None + */ +void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Disable interrupt */ + NVIC_DisableIRQ(IRQn); +} + +/** + * @brief Initiate a system reset request to reset the MCU. + * @retval None + */ +void HAL_NVIC_SystemReset(void) +{ + /* System Reset */ + NVIC_SystemReset(); +} + +/** + * @brief Initialize the System Timer with interrupt enabled and start the System Tick Timer (SysTick): + * Counter is in free running mode to generate periodic interrupts. + * @param TicksNumb Specifies the ticks Number of ticks between two interrupts. + * @retval status: - 0 Function succeeded. + * - 1 Function failed. + */ +uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) +{ + return SysTick_Config(TicksNumb); +} +/** + * @} + */ + +/** @addtogroup CORTEX_Exported_Functions_Group2 + * @brief Cortex control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control the CORTEX + (NVIC, SYSTICK, MPU) functionalities. + + +@endverbatim + * @{ + */ + +/** + * @brief Get the priority of an interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file) + * @retval None + */ +uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn) +{ + /* Get priority for Cortex-M system or device specific interrupts */ + return NVIC_GetPriority(IRQn); +} + +/** + * @brief Set Pending bit of an external interrupt. + * @param IRQn External interrupt number + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file) + * @retval None + */ +void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Set interrupt pending */ + NVIC_SetPendingIRQ(IRQn); +} + +/** + * @brief Get Pending Interrupt (read the pending register in the NVIC + * and return the pending bit for the specified interrupt). + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file) + * @retval status: - 0 Interrupt status is not pending. + * - 1 Interrupt status is pending. + */ +uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Return 1 if pending else 0 */ + return NVIC_GetPendingIRQ(IRQn); +} + +/** + * @brief Clear the pending bit of an external interrupt. + * @param IRQn External interrupt number. + * This parameter can be an enumerator of IRQn_Type enumeration + * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file) + * @retval None + */ +void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + /* Check the parameters */ + assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); + + /* Clear pending interrupt */ + NVIC_ClearPendingIRQ(IRQn); +} + + +/** + * @brief Handle SYSTICK interrupt request. + * @retval None + */ +void HAL_SYSTICK_IRQHandler(void) +{ + HAL_SYSTICK_Callback(); +} + +/** + * @brief SYSTICK callback. + * @retval None + */ +__weak void HAL_SYSTICK_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SYSTICK_Callback could be implemented in the user file + */ +} + +#if (__MPU_PRESENT == 1U) +/** + * @brief Disables the MPU + * @retval None + */ +void HAL_MPU_Disable(void) +{ + /* Make sure outstanding transfers are done */ + __DMB(); + + /* Disable the MPU and clear the control register*/ + MPU->CTRL = 0U; +} + +/** + * @brief Enable the MPU. + * @param MPU_Control: Specifies the control mode of the MPU during hard fault, + * NMI and privileged access to the default memory + * This parameter can be one of the following values: + * @arg MPU_HFNMI_PRIVDEF_NONE + * @arg MPU_HARDFAULT_NMI + * @arg MPU_PRIVILEGED_DEFAULT + * @arg MPU_HFNMI_PRIVDEF + * @retval None + */ +void HAL_MPU_Enable(uint32_t MPU_Control) +{ + /* Enable the MPU */ + MPU->CTRL = (MPU_Control | MPU_CTRL_ENABLE_Msk); + + /* Ensure MPU setting take effects */ + __DSB(); + __ISB(); +} + +/** + * @brief Initialize and configure the Region and the memory to be protected. + * @param MPU_Init Pointer to a MPU_Region_InitTypeDef structure that contains + * the initialization and configuration information. + * @retval None + */ +void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) +{ + /* Check the parameters */ + assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); + assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); + + /* Set the Region number */ + MPU->RNR = MPU_Init->Number; + + if ((MPU_Init->Enable) != 0U) + { + /* Check the parameters */ + assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); + assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); + assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); + assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); + assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); + assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); + assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); + assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); + + MPU->RBAR = MPU_Init->BaseAddress; + MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | + ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | + ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | + ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | + ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | + ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | + ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | + ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | + ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); + } + else + { + MPU->RBAR = 0x00U; + MPU->RASR = 0x00U; + } +} +#endif /* __MPU_PRESENT */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CORTEX_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_crc.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_crc.c new file mode 100644 index 0000000000..d030d84fa7 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_crc.c @@ -0,0 +1,516 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_crc.c + * @author MCD Application Team + * @brief CRC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Cyclic Redundancy Check (CRC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + (+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE(); + (+) Initialize CRC calculator + (++) specify generating polynomial (peripheral default or non-default one) + (++) specify initialization value (peripheral default or non-default one) + (++) specify input data format + (++) specify input or output data inversion mode if any + (+) Use HAL_CRC_Accumulate() function to compute the CRC value of the + input data buffer starting with the previously computed CRC as + initialization value + (+) Use HAL_CRC_Calculate() function to compute the CRC value of the + input data buffer starting with the defined initialization value + (default or non-default) to initiate CRC calculation + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup CRC CRC + * @brief CRC HAL module driver. + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup CRC_Private_Functions CRC Private Functions + * @{ + */ +static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength); +static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CRC_Exported_Functions CRC Exported Functions + * @{ + */ + +/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRC according to the specified parameters + in the CRC_InitTypeDef and create the associated handle + (+) DeInitialize the CRC peripheral + (+) Initialize the CRC MSP (MCU Specific Package) + (+) DeInitialize the CRC MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the CRC according to the specified + * parameters in the CRC_InitTypeDef and create the associated handle. + * @param hcrc CRC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if (hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + if (hcrc->State == HAL_CRC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcrc->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_CRC_MspInit(hcrc); + } + + hcrc->State = HAL_CRC_STATE_BUSY; + + /* check whether or not non-default generating polynomial has been + * picked up by user */ + assert_param(IS_DEFAULT_POLYNOMIAL(hcrc->Init.DefaultPolynomialUse)); + if (hcrc->Init.DefaultPolynomialUse == DEFAULT_POLYNOMIAL_ENABLE) + { + /* initialize peripheral with default generating polynomial */ + WRITE_REG(hcrc->Instance->POL, DEFAULT_CRC32_POLY); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, CRC_POLYLENGTH_32B); + } + else + { + /* initialize CRC peripheral with generating polynomial defined by user */ + if (HAL_CRCEx_Polynomial_Set(hcrc, hcrc->Init.GeneratingPolynomial, hcrc->Init.CRCLength) != HAL_OK) + { + return HAL_ERROR; + } + } + + /* check whether or not non-default CRC initial value has been + * picked up by user */ + assert_param(IS_DEFAULT_INIT_VALUE(hcrc->Init.DefaultInitValueUse)); + if (hcrc->Init.DefaultInitValueUse == DEFAULT_INIT_VALUE_ENABLE) + { + WRITE_REG(hcrc->Instance->INIT, DEFAULT_CRC_INITVALUE); + } + else + { + WRITE_REG(hcrc->Instance->INIT, hcrc->Init.InitValue); + } + + + /* set input data inversion mode */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(hcrc->Init.InputDataInversionMode)); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, hcrc->Init.InputDataInversionMode); + + /* set output data inversion mode */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(hcrc->Init.OutputDataInversionMode)); + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, hcrc->Init.OutputDataInversionMode); + + /* makes sure the input data format (bytes, halfwords or words stream) + * is properly specified by user */ + assert_param(IS_CRC_INPUTDATA_FORMAT(hcrc->InputDataFormat)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitialize the CRC peripheral. + * @param hcrc CRC handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc) +{ + /* Check the CRC handle allocation */ + if (hcrc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); + + /* Check the CRC peripheral state */ + if (hcrc->State == HAL_CRC_STATE_BUSY) + { + return HAL_BUSY; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC calculation unit */ + __HAL_CRC_DR_RESET(hcrc); + + /* Reset IDR register content */ + CLEAR_REG(hcrc->Instance->IDR); + + /* DeInit the low level hardware */ + HAL_CRC_MspDeInit(hcrc); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_RESET; + + /* Process unlocked */ + __HAL_UNLOCK(hcrc); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the CRC MSP. + * @param hcrc CRC handle + * @retval None + */ +__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CRC_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the CRC MSP. + * @param hcrc CRC handle + * @retval None + */ +__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcrc); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_CRC_MspDeInit can be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions + * @brief management functions. + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + using combination of the previous CRC value and the new one. + + [..] or + + (+) compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + independently of the previous CRC value. + +@endverbatim + * @{ + */ + +/** + * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + * starting with the previously computed CRC as initialization value. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer, exact input data format is + * provided by hcrc->InputDataFormat. + * @param BufferLength input data buffer length (number of bytes if pBuffer + * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, + * number of words if pBuffer type is * uint32_t). + * @note By default, the API expects a uint32_t pointer as input buffer parameter. + * Input buffer pointers with other types simply need to be cast in uint32_t + * and the API will internally adjust its input data processing based on the + * handle field hcrc->InputDataFormat. + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index; /* CRC input data buffer index */ + uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + switch (hcrc->InputDataFormat) + { + case CRC_INPUTDATA_FORMAT_WORDS: + /* Enter Data to the CRC calculator */ + for (index = 0U; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + temp = hcrc->Instance->DR; + break; + + case CRC_INPUTDATA_FORMAT_BYTES: + temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); + break; + + case CRC_INPUTDATA_FORMAT_HALFWORDS: + temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ + break; + default: + break; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return the CRC computed value */ + return temp; +} + +/** + * @brief Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer + * starting with hcrc->Instance->INIT as initialization value. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer, exact input data format is + * provided by hcrc->InputDataFormat. + * @param BufferLength input data buffer length (number of bytes if pBuffer + * type is * uint8_t, number of half-words if pBuffer type is * uint16_t, + * number of words if pBuffer type is * uint32_t). + * @note By default, the API expects a uint32_t pointer as input buffer parameter. + * Input buffer pointers with other types simply need to be cast in uint32_t + * and the API will internally adjust its input data processing based on the + * handle field hcrc->InputDataFormat. + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) +{ + uint32_t index; /* CRC input data buffer index */ + uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* Reset CRC Calculation Unit (hcrc->Instance->INIT is + * written in hcrc->Instance->DR) */ + __HAL_CRC_DR_RESET(hcrc); + + switch (hcrc->InputDataFormat) + { + case CRC_INPUTDATA_FORMAT_WORDS: + /* Enter 32-bit input data to the CRC calculator */ + for (index = 0U; index < BufferLength; index++) + { + hcrc->Instance->DR = pBuffer[index]; + } + temp = hcrc->Instance->DR; + break; + + case CRC_INPUTDATA_FORMAT_BYTES: + /* Specific 8-bit input data handling */ + temp = CRC_Handle_8(hcrc, (uint8_t *)pBuffer, BufferLength); + break; + + case CRC_INPUTDATA_FORMAT_HALFWORDS: + /* Specific 16-bit input data handling */ + temp = CRC_Handle_16(hcrc, (uint16_t *)(void *)pBuffer, BufferLength); /* Derogation MisraC2012 R.11.5 */ + break; + + default: + break; + } + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return the CRC computed value */ + return temp; +} + +/** + * @} + */ + +/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions + * @brief Peripheral State functions. + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Return the CRC handle state. + * @param hcrc CRC handle + * @retval HAL state + */ +HAL_CRC_StateTypeDef HAL_CRC_GetState(const CRC_HandleTypeDef *hcrc) +{ + /* Return CRC handle state */ + return hcrc->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup CRC_Private_Functions + * @{ + */ + +/** + * @brief Enter 8-bit input data to the CRC calculator. + * Specific data handling to optimize processing time. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer + * @param BufferLength input data buffer length + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength) +{ + uint32_t i; /* input data buffer index */ + uint16_t data; + __IO uint16_t *pReg; + + /* Processing time optimization: 4 bytes are entered in a row with a single word write, + * last bytes must be carefully fed to the CRC calculator to ensure a correct type + * handling by the peripheral */ + for (i = 0U; i < (BufferLength / 4U); i++) + { + hcrc->Instance->DR = ((uint32_t)pBuffer[4U * i] << 24U) | \ + ((uint32_t)pBuffer[(4U * i) + 1U] << 16U) | \ + ((uint32_t)pBuffer[(4U * i) + 2U] << 8U) | \ + (uint32_t)pBuffer[(4U * i) + 3U]; + } + /* last bytes specific handling */ + if ((BufferLength % 4U) != 0U) + { + if ((BufferLength % 4U) == 1U) + { + *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[4U * i]; /* Derogation MisraC2012 R.11.5 */ + } + if ((BufferLength % 4U) == 2U) + { + data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = data; + } + if ((BufferLength % 4U) == 3U) + { + data = ((uint16_t)(pBuffer[4U * i]) << 8U) | (uint16_t)pBuffer[(4U * i) + 1U]; + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = data; + + *(__IO uint8_t *)(__IO void *)(&hcrc->Instance->DR) = pBuffer[(4U * i) + 2U]; /* Derogation MisraC2012 R.11.5 */ + } + } + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @brief Enter 16-bit input data to the CRC calculator. + * Specific data handling to optimize processing time. + * @param hcrc CRC handle + * @param pBuffer pointer to the input data buffer + * @param BufferLength input data buffer length + * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) + */ +static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength) +{ + uint32_t i; /* input data buffer index */ + __IO uint16_t *pReg; + + /* Processing time optimization: 2 HalfWords are entered in a row with a single word write, + * in case of odd length, last HalfWord must be carefully fed to the CRC calculator to ensure + * a correct type handling by the peripheral */ + for (i = 0U; i < (BufferLength / 2U); i++) + { + hcrc->Instance->DR = ((uint32_t)pBuffer[2U * i] << 16U) | (uint32_t)pBuffer[(2U * i) + 1U]; + } + if ((BufferLength % 2U) != 0U) + { + pReg = (__IO uint16_t *)(__IO void *)(&hcrc->Instance->DR); /* Derogation MisraC2012 R.11.5 */ + *pReg = pBuffer[2U * i]; + } + + /* Return the CRC computed value */ + return hcrc->Instance->DR; +} + +/** + * @} + */ + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_crc_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_crc_ex.c new file mode 100644 index 0000000000..831b977b3f --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_crc_ex.c @@ -0,0 +1,230 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_crc_ex.c + * @author MCD Application Team + * @brief Extended CRC HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the CRC peripheral. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim +================================================================================ + ##### How to use this driver ##### +================================================================================ + [..] + (+) Set user-defined generating polynomial through HAL_CRCEx_Polynomial_Set() + (+) Configure Input or Output data inversion + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup CRCEx CRCEx + * @brief CRC Extended HAL module driver + * @{ + */ + +#ifdef HAL_CRC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup CRCEx_Exported_Functions CRC Extended Exported Functions + * @{ + */ + +/** @defgroup CRCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions + * @brief Extended Initialization and Configuration functions. + * +@verbatim + =============================================================================== + ##### Extended configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the generating polynomial + (+) Configure the input data inversion + (+) Configure the output data inversion + +@endverbatim + * @{ + */ + + +/** + * @brief Initialize the CRC polynomial if different from default one. + * @param hcrc CRC handle + * @param Pol CRC generating polynomial (7, 8, 16 or 32-bit long). + * This parameter is written in normal representation, e.g. + * @arg for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 + * @arg for a polynomial of degree 16, X^16 + X^12 + X^5 + 1 is written 0x1021 + * @param PolyLength CRC polynomial length. + * This parameter can be one of the following values: + * @arg @ref CRC_POLYLENGTH_7B 7-bit long CRC (generating polynomial of degree 7) + * @arg @ref CRC_POLYLENGTH_8B 8-bit long CRC (generating polynomial of degree 8) + * @arg @ref CRC_POLYLENGTH_16B 16-bit long CRC (generating polynomial of degree 16) + * @arg @ref CRC_POLYLENGTH_32B 32-bit long CRC (generating polynomial of degree 32) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t msb = 31U; /* polynomial degree is 32 at most, so msb is initialized to max value */ + + /* Check the parameters */ + assert_param(IS_CRC_POL_LENGTH(PolyLength)); + + /* Ensure that the generating polynomial is odd */ + if ((Pol & (uint32_t)(0x1U)) == 0U) + { + status = HAL_ERROR; + } + else + { + /* check polynomial definition vs polynomial size: + * polynomial length must be aligned with polynomial + * definition. HAL_ERROR is reported if Pol degree is + * larger than that indicated by PolyLength. + * Look for MSB position: msb will contain the degree of + * the second to the largest polynomial member. E.g., for + * X^7 + X^6 + X^5 + X^2 + 1, msb = 6. */ + while ((msb-- > 0U) && ((Pol & ((uint32_t)(0x1U) << (msb & 0x1FU))) == 0U)) + { + } + + switch (PolyLength) + { + + case CRC_POLYLENGTH_7B: + if (msb >= HAL_CRC_LENGTH_7B) + { + status = HAL_ERROR; + } + break; + case CRC_POLYLENGTH_8B: + if (msb >= HAL_CRC_LENGTH_8B) + { + status = HAL_ERROR; + } + break; + case CRC_POLYLENGTH_16B: + if (msb >= HAL_CRC_LENGTH_16B) + { + status = HAL_ERROR; + } + break; + + case CRC_POLYLENGTH_32B: + /* no polynomial definition vs. polynomial length issue possible */ + break; + default: + status = HAL_ERROR; + break; + } + } + if (status == HAL_OK) + { + /* set generating polynomial */ + WRITE_REG(hcrc->Instance->POL, Pol); + + /* set generating polynomial size */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, PolyLength); + } + /* Return function status */ + return status; +} + +/** + * @brief Set the Reverse Input data mode. + * @param hcrc CRC handle + * @param InputReverseMode Input Data inversion mode. + * This parameter can be one of the following values: + * @arg @ref CRC_INPUTDATA_INVERSION_NONE no change in bit order (default value) + * @arg @ref CRC_INPUTDATA_INVERSION_BYTE Byte-wise bit reversal + * @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD HalfWord-wise bit reversal + * @arg @ref CRC_INPUTDATA_INVERSION_WORD Word-wise bit reversal + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(InputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set input data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, InputReverseMode); + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Set the Reverse Output data mode. + * @param hcrc CRC handle + * @param OutputReverseMode Output Data inversion mode. + * This parameter can be one of the following values: + * @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion (default value) + * @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE bit-level inversion (e.g. for a 8-bit CRC: 0xB5 becomes 0xAD) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode) +{ + /* Check the parameters */ + assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(OutputReverseMode)); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_BUSY; + + /* set output data inversion mode */ + MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, OutputReverseMode); + + /* Change CRC peripheral state */ + hcrc->State = HAL_CRC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + + +/** + * @} + */ + + +/** + * @} + */ + + +#endif /* HAL_CRC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_cryp.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_cryp.c new file mode 100644 index 0000000000..3fcf60bbf0 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_cryp.c @@ -0,0 +1,5619 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_cryp.c + * @author MCD Application Team + * @brief CRYP HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Cryptography (CRYP) peripheral: + * + Initialization, de-initialization, set config and get config functions + * + AES processing functions + * + DMA callback functions + * + CRYP IRQ handler management + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The CRYP HAL driver can be used in CRYP or TinyAES peripheral as follows: + + (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit(): + (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE() + or __HAL_RCC_AES_CLK_ENABLE for TinyAES peripheral + (##) In case of using interrupts (e.g. HAL_CRYP_Encrypt_IT()) + (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority() + (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ() + (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler() + (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_Encrypt_DMA()) + (+++) Enable the DMAx interface clock using __RCC_DMAx_CLK_ENABLE() + (+++) Configure and enable two DMA streams one for managing data transfer from + memory to peripheral (input stream) and another stream for managing data + transfer from peripheral to memory (output stream) + (+++) Associate the initialized DMA handle to the CRYP DMA handle + using __HAL_LINKDMA() + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the two DMA channels. The output channel should have higher + priority than the input channel HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). + + (#)Initialize the CRYP according to the specified parameters : + (##) The data type: 1-bit, 8-bit, 16-bit or 32-bit. + (##) The key size: 128, 192 or 256. + (##) The AlgoMode DES/ TDES Algorithm ECB/CBC or AES Algorithm ECB/CBC/CTR/GCM or CCM. + (##) The initialization vector (counter). It is not used in ECB mode. + (##) The key buffer used for encryption/decryption. + (+++) In some specific configurations, the key is written by the application + code out of the HAL scope. In that case, user can still resort to the + HAL APIs as usual but must make sure that pKey pointer is set to NULL. + (##) The DataWidthUnit field. It specifies whether the data length (or the payload length for authentication + algorithms) is in words or bytes. + (##) The Header used only in AES GCM and CCM Algorithm for authentication. + (##) The HeaderSize providing the size of the header buffer in words or bytes, + depending upon HeaderWidthUnit field. + (##) The HeaderWidthUnit field. It specifies whether the header length (for authentication algorithms) + is in words or bytes. + (##) The B0 block is the first authentication block used only in AES CCM mode. + (##) The KeyIVConfigSkip used to process several messages in a row (please see more information below). + + (#)Three processing (encryption/decryption) functions are available: + (##) Polling mode: encryption and decryption APIs are blocking functions + i.e. they process the data and wait till the processing is finished, + e.g. HAL_CRYP_Encrypt & HAL_CRYP_Decrypt + (##) Interrupt mode: encryption and decryption APIs are not blocking functions + i.e. they process the data under interrupt, + e.g. HAL_CRYP_Encrypt_IT & HAL_CRYP_Decrypt_IT + (##) DMA mode: encryption and decryption APIs are not blocking functions + i.e. the data transfer is ensured by DMA, + e.g. HAL_CRYP_Encrypt_DMA & HAL_CRYP_Decrypt_DMA + + (#)When the processing function is called at first time after HAL_CRYP_Init() + the CRYP peripheral is configured and processes the buffer in input. + At second call, no need to Initialize the CRYP, user have to get current configuration via + HAL_CRYP_GetConfig() API, then only HAL_CRYP_SetConfig() is requested to set + new parameters, finally user can start encryption/decryption. + + (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral. + + (#)To process a single message with consecutive calls to HAL_CRYP_Encrypt() or HAL_CRYP_Decrypt() + without having to configure again the Key or the Initialization Vector between each API call, + the field KeyIVConfigSkip of the initialization structure must be set to CRYP_KEYIVCONFIG_ONCE. + Same is true for consecutive calls of HAL_CRYP_Encrypt_IT(), HAL_CRYP_Decrypt_IT(), HAL_CRYP_Encrypt_DMA() + or HAL_CRYP_Decrypt_DMA(). + + [..] + The cryptographic processor supports following standards: + (#) The data encryption standard (DES) and Triple-DES (TDES) supported only by CRYP1 peripheral: + (##)64-bit data block processing + (##) chaining modes supported : + (+++) Electronic Code Book(ECB) + (+++) Cipher Block Chaining (CBC) + (##) keys length supported :64-bit, 128-bit and 192-bit. + (#) The advanced encryption standard (AES) supported by CRYP1 & TinyAES peripheral: + (##)128-bit data block processing + (##) chaining modes supported : + (+++) Electronic Code Book(ECB) + (+++) Cipher Block Chaining (CBC) + (+++) Counter mode (CTR) + (+++) Galois/counter mode (GCM/GMAC) + (+++) Counter with Cipher Block Chaining-Message(CCM) + (##) keys length Supported : + (+++) for CRYP1 peripheral: 128-bit, 192-bit and 256-bit. + (+++) for TinyAES peripheral: 128-bit and 256-bit + + [..] + (@) Specific care must be taken to format the key and the Initialization Vector IV! + + [..] If the key is defined as a 128-bit long array key[127..0] = {b127 ... b0} where + b127 is the MSB and b0 the LSB, the key must be stored in MCU memory + (+) as a sequence of words where the MSB word comes first (occupies the + lowest memory address) + (++) address n+0 : 0b b127 .. b120 b119 .. b112 b111 .. b104 b103 .. b96 + (++) address n+4 : 0b b95 .. b88 b87 .. b80 b79 .. b72 b71 .. b64 + (++) address n+8 : 0b b63 .. b56 b55 .. b48 b47 .. b40 b39 .. b32 + (++) address n+C : 0b b31 .. b24 b23 .. b16 b15 .. b8 b7 .. b0 + [..] Hereafter, another illustration when considering a 128-bit long key made of 16 bytes {B15..B0}. + The 4 32-bit words that make the key must be stored as follows in MCU memory: + (+) address n+0 : 0x B15 B14 B13 B12 + (+) address n+4 : 0x B11 B10 B9 B8 + (+) address n+8 : 0x B7 B6 B5 B4 + (+) address n+C : 0x B3 B2 B1 B0 + [..] which leads to the expected setting + (+) AES_KEYR3 = 0x B15 B14 B13 B12 + (+) AES_KEYR2 = 0x B11 B10 B9 B8 + (+) AES_KEYR1 = 0x B7 B6 B5 B4 + (+) AES_KEYR0 = 0x B3 B2 B1 B0 + + [..] Same format must be applied for a 256-bit long key made of 32 bytes {B31..B0}. + The 8 32-bit words that make the key must be stored as follows in MCU memory: + (+) address n+00 : 0x B31 B30 B29 B28 + (+) address n+04 : 0x B27 B26 B25 B24 + (+) address n+08 : 0x B23 B22 B21 B20 + (+) address n+0C : 0x B19 B18 B17 B16 + (+) address n+10 : 0x B15 B14 B13 B12 + (+) address n+14 : 0x B11 B10 B9 B8 + (+) address n+18 : 0x B7 B6 B5 B4 + (+) address n+1C : 0x B3 B2 B1 B0 + [..] which leads to the expected setting + (+) AES_KEYR7 = 0x B31 B30 B29 B28 + (+) AES_KEYR6 = 0x B27 B26 B25 B24 + (+) AES_KEYR5 = 0x B23 B22 B21 B20 + (+) AES_KEYR4 = 0x B19 B18 B17 B16 + (+) AES_KEYR3 = 0x B15 B14 B13 B12 + (+) AES_KEYR2 = 0x B11 B10 B9 B8 + (+) AES_KEYR1 = 0x B7 B6 B5 B4 + (+) AES_KEYR0 = 0x B3 B2 B1 B0 + + [..] Initialization Vector IV (4 32-bit words) format must follow the same as + that of a 128-bit long key. + + [..] Note that key and IV registers are not sensitive to swap mode selection. + + [..] This section describes the AES Galois/counter mode (GCM) supported by both CRYP1 and TinyAES peripherals: + (#) Algorithm supported : + (##) Galois/counter mode (GCM) + (##) Galois message authentication code (GMAC) :is exactly the same as + GCM algorithm composed only by an header. + (#) Four phases are performed in GCM : + (##) Init phase: peripheral prepares the GCM hash subkey (H) and do the IV processing + (##) Header phase: peripheral processes the Additional Authenticated Data (AAD), with hash + computation only. + (##) Payload phase: peripheral processes the plaintext (P) with hash computation + keystream + encryption + data XORing. It works in a similar way for ciphertext (C). + (##) Final phase: peripheral generates the authenticated tag (T) using the last block of data. + (#) structure of message construction in GCM is defined as below : + (##) 16 bytes Initial Counter Block (ICB)composed of IV and counter + (##) The authenticated header A (also knows as Additional Authentication Data AAD) + this part of the message is only authenticated, not encrypted. + (##) The plaintext message P is both authenticated and encrypted as ciphertext. + GCM standard specifies that ciphertext has same bit length as the plaintext. + (##) The last block is composed of the length of A (on 64 bits) and the length of ciphertext + (on 64 bits) + + [..] A more detailed description of the GCM message structure is available below. + + [..] This section describe The AES Counter with Cipher Block Chaining-Message + Authentication Code (CCM) supported by both CRYP1 and TinyAES peripheral: + (#) Specific parameters for CCM : + + (##) B0 block : follows NIST Special Publication 800-38C, + (##) B1 block (header) + (##) CTRx block : control blocks + + [..] A detailed description of the CCM message structure is available below. + + (#) Four phases are performed in CCM for CRYP1 peripheral: + (##) Init phase: peripheral prepares the GCM hash subkey (H) and do the IV processing + (##) Header phase: peripheral processes the Additional Authenticated Data (AAD), with hash + computation only. + (##) Payload phase: peripheral processes the plaintext (P) with hash computation + keystream + encryption + data XORing. It works in a similar way for ciphertext (C). + (##) Final phase: peripheral generates the authenticated tag (T) using the last block of data. + (#) CCM in TinyAES peripheral: + (##) To perform message payload encryption or decryption AES is configured in CTR mode. + (##) For authentication two phases are performed : + - Header phase: peripheral processes the Additional Authenticated Data (AAD) first, then the cleartext message + only cleartext payload (not the ciphertext payload) is used and no output. + (##) Final phase: peripheral generates the authenticated tag (T) using the last block of data. + + *** Callback registration *** + ============================= + + [..] + The compilation define USE_HAL_CRYP_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_CRYP_RegisterCallback() or HAL_CRYP_RegisterXXXCallback() + to register an interrupt callback. + + [..] + Function HAL_CRYP_RegisterCallback() allows to register following callbacks: + (+) InCpltCallback : Input FIFO transfer completed callback. + (+) OutCpltCallback : Output FIFO transfer completed callback. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : CRYP MspInit. + (+) MspDeInitCallback : CRYP MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_CRYP_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_CRYP_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) InCpltCallback : Input FIFO transfer completed callback. + (+) OutCpltCallback : Output FIFO transfer completed callback. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : CRYP MspInit. + (+) MspDeInitCallback : CRYP MspDeInit. + + [..] + By default, after the HAL_CRYP_Init() and when the state is HAL_CRYP_STATE_RESET + all callbacks are set to the corresponding weak functions : + examples HAL_CRYP_InCpltCallback() , HAL_CRYP_OutCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak function in the HAL_CRYP_Init()/ HAL_CRYP_DeInit() only when + these callbacks are null (not registered beforehand). + if not, MspInit or MspDeInit are not null, the HAL_CRYP_Init() / HAL_CRYP_DeInit() + keep and use the user MspInit/MspDeInit functions (registered beforehand) + + [..] + Callbacks can be registered/unregistered in HAL_CRYP_STATE_READY state only. + Exception done MspInit/MspDeInit callbacks that can be registered/unregistered + in HAL_CRYP_STATE_READY or HAL_CRYP_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_CRYP_RegisterCallback() before calling HAL_CRYP_DeInit() + or HAL_CRYP_Init() function. + + [..] + When The compilation define USE_HAL_CRYP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + + *** Suspend/Resume feature *** + ============================== + + [..] + The compilation define USE_HAL_CRYP_SUSPEND_RESUME when set to 1 + allows the user to resort to the suspend/resume feature. + A low priority block processing can be suspended to process a high priority block + instead. When the high priority block processing is over, the low priority block + processing can be resumed, restarting from the point where it was suspended. This + feature is applicable only in non-blocking interrupt mode. + + [..] User must resort to HAL_CRYP_Suspend() to suspend the low priority block + processing. This API manages the hardware block processing suspension and saves all the + internal data that will be needed to restart later on. Upon HAL_CRYP_Suspend() completion, + the user can launch the processing of any other block (high priority block processing). + + [..] When the high priority block processing is over, user must invoke HAL_CRYP_Resume() + to resume the low priority block processing. Ciphering (or deciphering) restarts from + the suspension point and ends as usual. + + [..] HAL_CRYP_Suspend() reports an error when the suspension request is sent too late + (i.e when the low priority block processing is about to end). There is no use to + suspend the tag generation processing for authentication algorithms. + + [..] + (@) If the key is written out of HAL scope (case pKey pointer set to NULL by the user), + the block processing suspension/resumption mechanism is NOT applicable. + + [..] + (@) If the Key and Initialization Vector are configured only once and configuration is + skipped for consecutive processings (case KeyIVConfigSkip set to CRYP_KEYIVCONFIG_ONCE), + the block processing suspension/resumption mechanism is NOT applicable. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup CRYP + * @{ + */ + +#if defined(AES) +#ifdef HAL_CRYP_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup CRYP_Private_Defines + * @{ + */ +#define CRYP_TIMEOUT_KEYPREPARATION 82U /* The latency of key preparation operation is 82 clock cycles.*/ +#define CRYP_TIMEOUT_GCMCCMINITPHASE 299U /* The latency of GCM/CCM init phase to prepare hash subkey + is 299 clock cycles.*/ +#define CRYP_TIMEOUT_GCMCCMHEADERPHASE 290U /* The latency of GCM/CCM header phase is 290 clock cycles.*/ + +#define CRYP_PHASE_READY 0x00000001U /*!< CRYP peripheral is ready for initialization. */ +#define CRYP_PHASE_PROCESS 0x00000002U /*!< CRYP peripheral is in processing phase */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +#define CRYP_PHASE_HEADER_SUSPENDED 0x00000004U /*!< GCM/GMAC/CCM header phase is suspended */ +#define CRYP_PHASE_PAYLOAD_SUSPENDED 0x00000005U /*!< GCM/CCM payload phase is suspended */ +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ +#define CRYP_PHASE_HEADER_DMA_FEED 0x00000006U /*!< GCM/GMAC/CCM header is fed to the peripheral in DMA mode */ + +#define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U /*!< Encryption mode(Mode 1) */ +#define CRYP_OPERATINGMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode only used when performing ECB and CBC decryptions (Mode 2) */ +#define CRYP_OPERATINGMODE_DECRYPT AES_CR_MODE_1 /*!< Decryption (Mode 3) */ +#define CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT AES_CR_MODE /*!< Key derivation and decryption only used when performing ECB and CBC decryptions (Mode 4) */ +#define CRYP_PHASE_INIT 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ +#define CRYP_PHASE_HEADER AES_CR_GCMPH_0 /*!< GCM/GMAC or CCM header phase */ +#define CRYP_PHASE_PAYLOAD AES_CR_GCMPH_1 /*!< GCM(/CCM) payload phase */ +#define CRYP_PHASE_FINAL AES_CR_GCMPH /*!< GCM/GMAC or CCM final phase */ + +/* CTR1 information to use in CCM algorithm */ +#define CRYP_CCM_CTR1_0 0x07FFFFFFU +#define CRYP_CCM_CTR1_1 0xFFFFFF00U +#define CRYP_CCM_CTR1_2 0x00000001U + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @addtogroup CRYP_Private_Macros + * @{ + */ + +#define CRYP_SET_PHASE(__HANDLE__, __PHASE__) MODIFY_REG((__HANDLE__)->Instance->CR,\ + AES_CR_GCMPH, (uint32_t)(__PHASE__)) + +/** + * @} + */ + +/* Private struct -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup CRYP_Private_Functions + * @{ + */ + +static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr); +static HAL_StatusTypeDef CRYP_SetHeaderDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size); +static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma); +static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma); +static void CRYP_DMAError(DMA_HandleTypeDef *hdma); +static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint32_t KeySize); +static void CRYP_AES_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp); +static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_GCMCCM_SetPayloadPhase_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESGCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AESCCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AESCCM_Process_DMA(CRYP_HandleTypeDef *hcryp); +static void CRYP_AES_ProcessData(CRYP_HandleTypeDef *hcrypt, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AES_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AES_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static HAL_StatusTypeDef CRYP_AES_Decrypt_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AES_Encrypt_IT(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_AES_Decrypt_DMA(CRYP_HandleTypeDef *hcryp); +static HAL_StatusTypeDef CRYP_WaitOnCCFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +static void CRYP_ClearCCFlagWhenHigh(CRYP_HandleTypeDef *hcryp, uint32_t Timeout); +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +static void CRYP_Read_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Output); +static void CRYP_Write_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Input); +static void CRYP_Read_SuspendRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Output); +static void CRYP_Write_SuspendRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Input); +static void CRYP_Read_KeyRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Output, uint32_t KeySize); +static void CRYP_Write_KeyRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint32_t KeySize); +static void CRYP_PhaseProcessingResume(CRYP_HandleTypeDef *hcryp); +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @addtogroup CRYP_Exported_Functions + * @{ + */ + +/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions. + * +@verbatim + ======================================================================================== + ##### Initialization, de-initialization and Set and Get configuration functions ##### + ======================================================================================== + [..] This section provides functions allowing to: + (+) Initialize the CRYP + (+) DeInitialize the CRYP + (+) Initialize the CRYP MSP + (+) DeInitialize the CRYP MSP + (+) configure CRYP (HAL_CRYP_SetConfig) with the specified parameters in the CRYP_ConfigTypeDef + Parameters which are configured in This section are : + (++) Key size + (++) Data Type : 32,16, 8 or 1bit + (++) AlgoMode : + (+++) for CRYP1 peripheral : + ECB and CBC in DES/TDES Standard + ECB,CBC,CTR,GCM/GMAC and CCM in AES Standard. + (+++) for TinyAES2 peripheral, only ECB,CBC,CTR,GCM/GMAC and CCM in AES Standard are supported. + (+) Get CRYP configuration (HAL_CRYP_GetConfig) from the specified parameters in the CRYP_HandleTypeDef + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the CRYP according to the specified + * parameters in the CRYP_ConfigTypeDef and creates the associated handle. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if (hcryp == NULL) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize)); + assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType)); + assert_param(IS_CRYP_ALGORITHM(hcryp->Init.Algorithm)); + assert_param(IS_CRYP_INIT(hcryp->Init.KeyIVConfigSkip)); + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + if (hcryp->State == HAL_CRYP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcryp->Lock = HAL_UNLOCKED; + + hcryp->InCpltCallback = HAL_CRYP_InCpltCallback; /* Legacy weak InCpltCallback */ + hcryp->OutCpltCallback = HAL_CRYP_OutCpltCallback; /* Legacy weak OutCpltCallback */ + hcryp->ErrorCallback = HAL_CRYP_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hcryp->MspInitCallback == NULL) + { + hcryp->MspInitCallback = HAL_CRYP_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware */ + hcryp->MspInitCallback(hcryp); + } +#else + if (hcryp->State == HAL_CRYP_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcryp->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_CRYP_MspInit(hcryp); + } +#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */ + + /* Set the key size (This bit field is do not care in the DES or TDES modes), data type and Algorithm */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE | AES_CR_KEYSIZE | AES_CR_CHMOD, + hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); + + /* Reset Error Code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_NONE; + + /* Reset peripheral Key and IV configuration flag */ + hcryp->KeyIVConfig = 0U; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Set the default CRYP phase */ + hcryp->Phase = CRYP_PHASE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief De-Initializes the CRYP peripheral. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if (hcryp == NULL) + { + return HAL_ERROR; + } + + /* Set the default CRYP phase */ + hcryp->Phase = CRYP_PHASE_READY; + + /* Reset CrypInCount and CrypOutCount */ + hcryp->CrypInCount = 0; + hcryp->CrypOutCount = 0; + hcryp->CrypHeaderCount = 0; + + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + + if (hcryp->MspDeInitCallback == NULL) + { + hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; /* Legacy weak MspDeInit */ + } + /* DeInit the low level hardware */ + hcryp->MspDeInitCallback(hcryp); + +#else + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + HAL_CRYP_MspDeInit(hcryp); + +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configure the CRYP according to the specified + * parameters in the CRYP_ConfigTypeDef + * @param hcryp pointer to a CRYP_HandleTypeDef structure + * @param pConf pointer to a CRYP_ConfigTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf) +{ + /* Check the CRYP handle allocation */ + if ((hcryp == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + + /* Check parameters */ + assert_param(IS_CRYP_KEYSIZE(pConf->KeySize)); + assert_param(IS_CRYP_DATATYPE(pConf->DataType)); + assert_param(IS_CRYP_ALGORITHM(pConf->Algorithm)); + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Set CRYP parameters */ + hcryp->Init.DataType = pConf->DataType; + hcryp->Init.pKey = pConf->pKey; + hcryp->Init.Algorithm = pConf->Algorithm; + hcryp->Init.KeySize = pConf->KeySize; + hcryp->Init.pInitVect = pConf->pInitVect; + hcryp->Init.Header = pConf->Header; + hcryp->Init.HeaderSize = pConf->HeaderSize; + hcryp->Init.B0 = pConf->B0; + hcryp->Init.DataWidthUnit = pConf->DataWidthUnit; + hcryp->Init.HeaderWidthUnit = pConf->HeaderWidthUnit; + hcryp->Init.KeyIVConfigSkip = pConf->KeyIVConfigSkip; + + /* Set the key size (This bit field is do not care in the DES or TDES modes), data type and operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE | AES_CR_KEYSIZE | AES_CR_CHMOD, + hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm); + + /*clear error flags*/ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_ERR_CLEAR); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Reset Error Code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_NONE; + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Set the default CRYP phase */ + hcryp->Phase = CRYP_PHASE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } +} + +/** + * @brief Get CRYP Configuration parameters in associated handle. + * @param pConf pointer to a CRYP_ConfigTypeDef structure + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf) +{ + /* Check the CRYP handle allocation */ + if ((hcryp == NULL) || (pConf == NULL)) + { + return HAL_ERROR; + } + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Get CRYP parameters */ + pConf->DataType = hcryp->Init.DataType; + pConf->pKey = hcryp->Init.pKey; + pConf->Algorithm = hcryp->Init.Algorithm; + pConf->KeySize = hcryp->Init.KeySize ; + pConf->pInitVect = hcryp->Init.pInitVect; + pConf->Header = hcryp->Init.Header ; + pConf->HeaderSize = hcryp->Init.HeaderSize; + pConf->B0 = hcryp->Init.B0; + pConf->DataWidthUnit = hcryp->Init.DataWidthUnit; + pConf->HeaderWidthUnit = hcryp->Init.HeaderWidthUnit; + pConf->KeyIVConfigSkip = hcryp->Init.KeyIVConfigSkip; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } +} +/** + * @brief Initializes the CRYP MSP. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitializes CRYP MSP. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User CRYP Callback + * To be used instead of the weak predefined callback + * @param hcryp cryp handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_CRYP_INPUT_COMPLETE_CB_ID Input FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_OUTPUT_COMPLETE_CB_ID Output FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_ERROR_CB_ID Error callback ID + * @arg @ref HAL_CRYP_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_CRYP_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID, + pCRYP_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hcryp); + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + switch (CallbackID) + { + case HAL_CRYP_INPUT_COMPLETE_CB_ID : + hcryp->InCpltCallback = pCallback; + break; + + case HAL_CRYP_OUTPUT_COMPLETE_CB_ID : + hcryp->OutCpltCallback = pCallback; + break; + + case HAL_CRYP_ERROR_CB_ID : + hcryp->ErrorCallback = pCallback; + break; + + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = pCallback; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcryp->State == HAL_CRYP_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = pCallback; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return status; +} + +/** + * @brief Unregister an CRYP Callback + * CRYP callback is redirected to the weak predefined callback + * @param hcryp cryp handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_CRYP_INPUT_COMPLETE_CB_ID Input FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_OUTPUT_COMPLETE_CB_ID Output FIFO transfer completed callback ID + * @arg @ref HAL_CRYP_ERROR_CB_ID Error callback ID + * @arg @ref HAL_CRYP_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_CRYP_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hcryp); + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + switch (CallbackID) + { + case HAL_CRYP_INPUT_COMPLETE_CB_ID : + hcryp->InCpltCallback = HAL_CRYP_InCpltCallback; /* Legacy weak InCpltCallback */ + break; + + case HAL_CRYP_OUTPUT_COMPLETE_CB_ID : + hcryp->OutCpltCallback = HAL_CRYP_OutCpltCallback; /* Legacy weak OutCpltCallback */ + break; + + case HAL_CRYP_ERROR_CB_ID : + hcryp->ErrorCallback = HAL_CRYP_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = HAL_CRYP_MspInit; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hcryp->State == HAL_CRYP_STATE_RESET) + { + switch (CallbackID) + { + case HAL_CRYP_MSPINIT_CB_ID : + hcryp->MspInitCallback = HAL_CRYP_MspInit; + break; + + case HAL_CRYP_MSPDEINIT_CB_ID : + hcryp->MspDeInitCallback = HAL_CRYP_MspDeInit; + break; + + default : + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK; + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_INVALID_CALLBACK;; + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hcryp); + + return status; +} +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +/** + * @brief Request CRYP processing suspension when in interruption mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @note Set the handle field SuspendRequest to the appropriate value so that + * the on-going CRYP processing is suspended as soon as the required + * conditions are met. + * @note HAL_CRYP_ProcessSuspend() can only be invoked when the processing is done + * in non-blocking interrupt mode. + * @note It is advised not to suspend the CRYP processing when the DMA controller + * is managing the data transfer. + * @retval None + */ +void HAL_CRYP_ProcessSuspend(CRYP_HandleTypeDef *hcryp) +{ + /* Set Handle SuspendRequest field */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND; +} + +/** + * @brief CRYP processing suspension and peripheral internal parameters storage. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @note peripheral internal parameters are stored to be readily available when + * suspended processing is resumed later on. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Suspend(CRYP_HandleTypeDef *hcryp) +{ + HAL_CRYP_STATETypeDef state; + + /* Request suspension */ + HAL_CRYP_ProcessSuspend(hcryp); + + do + { + state = HAL_CRYP_GetState(hcryp); + } while ((state != HAL_CRYP_STATE_SUSPENDED) && (state != HAL_CRYP_STATE_READY)); + + if (HAL_CRYP_GetState(hcryp) == HAL_CRYP_STATE_READY) + { + /* Processing was already over or was about to end. No suspension done */ + return HAL_ERROR; + } + else + { + /* Suspend Processing */ + + /* If authentication algorithms on-going, carry out first saving steps + before disable the peripheral */ + if ((hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) || \ + (hcryp->Init.Algorithm == CRYP_AES_CCM)) + { + /* Save Suspension registers */ + CRYP_Read_SuspendRegisters(hcryp, hcryp->SUSPxR_saved); + /* Save Key */ + CRYP_Read_KeyRegisters(hcryp, hcryp->Key_saved, hcryp->Init.KeySize); + /* Save IV */ + CRYP_Read_IVRegisters(hcryp, hcryp->IV_saved); + } + /* Disable AES */ + __HAL_CRYP_DISABLE(hcryp); + + /* Save low-priority block CRYP handle parameters */ + hcryp->Init_saved = hcryp->Init; + hcryp->pCrypInBuffPtr_saved = hcryp->pCrypInBuffPtr; + hcryp->pCrypOutBuffPtr_saved = hcryp->pCrypOutBuffPtr; + hcryp->CrypInCount_saved = hcryp->CrypInCount; + hcryp->CrypOutCount_saved = hcryp->CrypOutCount; + hcryp->Phase_saved = hcryp->Phase; + hcryp->State_saved = hcryp->State; + hcryp->Size_saved = ((hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) ? \ + (hcryp->Size / 4U) : hcryp->Size); + hcryp->SizesSum_saved = hcryp->SizesSum; + hcryp->AutoKeyDerivation_saved = hcryp->AutoKeyDerivation; + hcryp->CrypHeaderCount_saved = hcryp->CrypHeaderCount; + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + + if ((hcryp->Init.Algorithm == CRYP_AES_CBC) || \ + (hcryp->Init.Algorithm == CRYP_AES_CTR)) + { + /* Save Initialisation Vector registers */ + CRYP_Read_IVRegisters(hcryp, hcryp->IV_saved); + } + + /* Save Control register */ + hcryp->CR_saved = hcryp->Instance->CR; + + } + return HAL_OK; +} + + +/** + * @brief CRYP processing resumption. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @note Processing restarts at the exact point where it was suspended, based + * on the parameters saved at suspension time. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Resume(CRYP_HandleTypeDef *hcryp) +{ + /* Check the CRYP handle allocation */ + if (hcryp == NULL) + { + return HAL_ERROR; + } + + if (hcryp->State_saved != HAL_CRYP_STATE_SUSPENDED) + { + /* CRYP was not suspended */ + return HAL_ERROR; + } + else + { + + /* Restore low-priority block CRYP handle parameters */ + hcryp->Init = hcryp->Init_saved; + hcryp->State = hcryp->State_saved; + + /* Chaining algorithms case */ + if ((hcryp->Init_saved.Algorithm == CRYP_AES_ECB) || \ + (hcryp->Init_saved.Algorithm == CRYP_AES_CBC) || \ + (hcryp->Init_saved.Algorithm == CRYP_AES_CTR)) + { + /* Restore low-priority block CRYP handle parameters */ + hcryp->AutoKeyDerivation = hcryp->AutoKeyDerivation_saved; + + if ((hcryp->Init.Algorithm == CRYP_AES_CBC) || \ + (hcryp->Init.Algorithm == CRYP_AES_CTR)) + { + hcryp->Init.pInitVect = hcryp->IV_saved; + } + __HAL_CRYP_DISABLE(hcryp); + (void) HAL_CRYP_Init(hcryp); + } + else /* Authentication algorithms case */ + { + /* Restore low-priority block CRYP handle parameters */ + hcryp->Phase = hcryp->Phase_saved; + hcryp->CrypHeaderCount = hcryp->CrypHeaderCount_saved; + hcryp->SizesSum = hcryp->SizesSum_saved; + + /* Disable AES and write-back SUSPxR registers */; + __HAL_CRYP_DISABLE(hcryp); + /* Restore AES Suspend Registers */ + CRYP_Write_SuspendRegisters(hcryp, hcryp->SUSPxR_saved); + /* Restore Control, Key and IV Registers, then enable AES */ + hcryp->Instance->CR = hcryp->CR_saved; + CRYP_Write_KeyRegisters(hcryp, hcryp->Key_saved, hcryp->Init.KeySize); + CRYP_Write_IVRegisters(hcryp, hcryp->IV_saved); + + /* At the same time, set handle state back to READY to be able to resume the AES calculations + without the processing APIs returning HAL_BUSY when called. */ + hcryp->State = HAL_CRYP_STATE_READY; + } + + + /* Resume low-priority block processing under IT */ + hcryp->ResumingFlag = 1U; + if (READ_BIT(hcryp->CR_saved, AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) + { + if (HAL_CRYP_Encrypt_IT(hcryp, hcryp->pCrypInBuffPtr_saved, hcryp->Size_saved, \ + hcryp->pCrypOutBuffPtr_saved) != HAL_OK) + { + return HAL_ERROR; + } + } + else + { + if (HAL_CRYP_Decrypt_IT(hcryp, hcryp->pCrypInBuffPtr_saved, hcryp->Size_saved, \ + hcryp->pCrypOutBuffPtr_saved) != HAL_OK) + { + return HAL_ERROR; + } + } + } + return HAL_OK; +} +#endif /* defined (USE_HAL_CRYP_SUSPEND_RESUME) */ + +/** + * @} + */ + +/** @defgroup CRYP_Exported_Functions_Group2 Encryption Decryption functions + * @brief Encryption Decryption functions. + * +@verbatim + ============================================================================== + ##### Encrypt Decrypt functions ##### + ============================================================================== + [..] This section provides API allowing to Encrypt/Decrypt Data following + Standard DES/TDES or AES, and Algorithm configured by the user: + (+) Standard DES/TDES only supported by CRYP1 peripheral, below list of Algorithm supported : + - Electronic Code Book(ECB) + - Cipher Block Chaining (CBC) + (+) Standard AES supported by CRYP1 peripheral & TinyAES, list of Algorithm supported: + - Electronic Code Book(ECB) + - Cipher Block Chaining (CBC) + - Counter mode (CTR) + - Cipher Block Chaining (CBC) + - Counter mode (CTR) + - Galois/counter mode (GCM) + - Counter with Cipher Block Chaining-Message(CCM) + [..] Three processing functions are available: + (+) Polling mode : HAL_CRYP_Encrypt & HAL_CRYP_Decrypt + (+) Interrupt mode : HAL_CRYP_Encrypt_IT & HAL_CRYP_Decrypt_IT + (+) DMA mode : HAL_CRYP_Encrypt_DMA & HAL_CRYP_Decrypt_DMA + +@endverbatim + * @{ + */ + +/* GCM message structure additional details + + ICB + +-------------------------------------------------------+ + | Initialization vector (IV) | Counter | + |----------------|----------------|-----------|---------| + 127 95 63 31 0 + + + Bit Number Register Contents + ---------- --------------- ----------- + 127 ...96 CRYP_IV1R[31:0] ICB[127:96] + 95 ...64 CRYP_IV1L[31:0] B0[95:64] + 63 ... 32 CRYP_IV0R[31:0] ICB[63:32] + 31 ... 0 CRYP_IV0L[31:0] ICB[31:0], where 32-bit counter= 0x2 + + + + GCM last block definition + +-------------------------------------------------------------------+ + | Bit[0] | Bit[32] | Bit[64] | Bit[96] | + |-----------|--------------------|-----------|----------------------| + | 0x0 | Header length[31:0]| 0x0 | Payload length[31:0] | + |-----------|--------------------|-----------|----------------------| + +*/ + +/* CCM message blocks description + + (##) B0 block : According to NIST Special Publication 800-38C, + The first block B0 is formatted as follows, where l(m) is encoded in + most-significant-byte first order: + + Octet Number Contents + ------------ --------- + 0 Flags + 1 ... 15-q Nonce N + 16-q ... 15 Q + + the Flags field is formatted as follows: + + Bit Number Contents + ---------- ---------------------- + 7 Reserved (always zero) + 6 Adata + 5 ... 3 (t-2)/2 + 2 ... 0 [q-1]3 + + - Q: a bit string representation of the octet length of P (plaintext) + - q The octet length of the binary representation of the octet length of the payload + - A nonce (N), n The octet length of the where n+q=15. + - Flags: most significant octet containing four flags for control information, + - t The octet length of the MAC. + (##) B1 block (header) : associated data length(a) concatenated with Associated Data (A) + the associated data length expressed in bytes (a) defined as below: + - If 0 < a < 216-28, then it is encoded as [a]16, i.e. two octets + - If 216-28 < a < 232, then it is encoded as 0xff || 0xfe || [a]32, i.e. six octets + - If 232 < a < 264, then it is encoded as 0xff || 0xff || [a]64, i.e. ten octets + (##) CTRx block : control blocks + - Generation of CTR1 from first block B0 information : + equal to B0 with first 5 bits zeroed and most significant bits storing octet + length of P also zeroed, then incremented by one + + Bit Number Register Contents + ---------- --------------- ----------- + 127 ...96 CRYP_IV1R[31:0] B0[127:96], where Q length bits are set to 0, except for + bit 0 that is set to 1 + 95 ...64 CRYP_IV1L[31:0] B0[95:64] + 63 ... 32 CRYP_IV0R[31:0] B0[63:32] + 31 ... 0 CRYP_IV0L[31:0] B0[31:0], where flag bits set to 0 + + - Generation of CTR0: same as CTR1 with bit[0] set to zero. + +*/ + +/** + * @brief Encryption mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (plaintext) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(ciphertext) + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, + uint32_t Timeout) +{ + uint32_t algo; + HAL_StatusTypeDef status; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif /* USE_FULL_ASSERT */ + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set the operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES encryption */ + status = CRYP_AES_Encrypt(hcryp, Timeout); + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM encryption */ + status = CRYP_AESGCM_Process(hcryp, Timeout) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM encryption */ + status = CRYP_AESCCM_Process(hcryp, Timeout); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Decryption mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (ciphertext ) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(plaintext) + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output, + uint32_t Timeout) +{ + HAL_StatusTypeDef status; + uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif /* USE_FULL_ASSERT */ + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set Decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES decryption */ + status = CRYP_AES_Decrypt(hcryp, Timeout); + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM decryption */ + status = CRYP_AESGCM_Process(hcryp, Timeout) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM decryption */ + status = CRYP_AESCCM_Process(hcryp, Timeout); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Encryption in interrupt mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (plaintext) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(ciphertext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + HAL_StatusTypeDef status; + uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif /* USE_FULL_ASSERT */ + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if (hcryp->ResumingFlag == 1U) + { + hcryp->ResumingFlag = 0U; + if (hcryp->Phase != CRYP_PHASE_HEADER_SUSPENDED) + { + hcryp->CrypInCount = (uint16_t) hcryp->CrypInCount_saved; + hcryp->CrypOutCount = (uint16_t) hcryp->CrypOutCount_saved; + } + else + { + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + } + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + } + + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set encryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES encryption */ + status = CRYP_AES_Encrypt_IT(hcryp); + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM encryption */ + status = CRYP_AESGCM_Process_IT(hcryp) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM encryption */ + status = CRYP_AESCCM_Process_IT(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Decryption in interrupt mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (ciphertext ) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(plaintext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + HAL_StatusTypeDef status; + uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif /* USE_FULL_ASSERT */ + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if (hcryp->ResumingFlag == 1U) + { + hcryp->ResumingFlag = 0U; + if (hcryp->Phase != CRYP_PHASE_HEADER_SUSPENDED) + { + hcryp->CrypInCount = (uint16_t) hcryp->CrypInCount_saved; + hcryp->CrypOutCount = (uint16_t) hcryp->CrypOutCount_saved; + } + else + { + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + } + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + } + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES decryption */ + status = CRYP_AES_Decrypt_IT(hcryp); + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM decryption */ + status = CRYP_AESGCM_Process_IT(hcryp) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM decryption */ + status = CRYP_AESCCM_Process_IT(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Encryption in DMA mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (plaintext) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(ciphertext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + HAL_StatusTypeDef status; + uint32_t algo; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif /* USE_FULL_ASSERT */ + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr and pCrypOutBuffPtr parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set encryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the Initialization Vector*/ + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Start DMA process transfer for AES */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (hcryp->Size / 4U), \ + (uint32_t)(hcryp->pCrypOutBuffPtr)); + status = HAL_OK; + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM encryption */ + status = CRYP_AESGCM_Process_DMA(hcryp) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM encryption */ + status = CRYP_AESCCM_Process_DMA(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Return function status */ + return status; +} + +/** + * @brief Decryption in DMA mode. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Input Pointer to the input buffer (ciphertext ) + * @param Size Length of the plaintext buffer in bytes or words (depending upon DataWidthUnit field) + * @param Output Pointer to the output buffer(plaintext) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output) +{ + HAL_StatusTypeDef status; + uint32_t algo; +#ifdef USE_FULL_ASSERT + uint32_t algo_assert = (hcryp->Instance->CR) & AES_CR_CHMOD; + + /* Check input buffer size */ + assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size)); +#endif /* USE_FULL_ASSERT */ + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + + /* Change state Busy */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Reset CrypInCount, CrypOutCount and Initialize pCrypInBuffPtr, pCrypOutBuffPtr and Size parameters*/ + hcryp->CrypInCount = 0U; + hcryp->CrypOutCount = 0U; + hcryp->pCrypInBuffPtr = Input; + hcryp->pCrypOutBuffPtr = Output; + + /* Calculate Size parameter in Byte*/ + if (hcryp->Init.DataWidthUnit == CRYP_DATAWIDTHUNIT_WORD) + { + hcryp->Size = Size * 4U; + } + else + { + hcryp->Size = Size; + } + + /* Set decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + + /* algo get algorithm selected */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + switch (algo) + { + + case CRYP_AES_ECB: + case CRYP_AES_CBC: + case CRYP_AES_CTR: + + /* AES decryption */ + status = CRYP_AES_Decrypt_DMA(hcryp); + break; + + case CRYP_AES_GCM_GMAC: + + /* AES GCM decryption */ + status = CRYP_AESGCM_Process_DMA(hcryp) ; + break; + + case CRYP_AES_CCM: + + /* AES CCM decryption */ + status = CRYP_AESCCM_Process_DMA(hcryp); + break; + + default: + hcryp->ErrorCode |= HAL_CRYP_ERROR_NOT_SUPPORTED; + status = HAL_ERROR; + break; + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + status = HAL_ERROR; + } + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup CRYP_Exported_Functions_Group3 CRYP IRQ handler management + * @brief CRYP IRQ handler. + * +@verbatim + ============================================================================== + ##### CRYP IRQ handler management ##### + ============================================================================== +[..] This section provides CRYP IRQ handler and callback functions. + (+) HAL_CRYP_IRQHandler CRYP interrupt request + (+) HAL_CRYP_InCpltCallback input data transfer complete callback + (+) HAL_CRYP_OutCpltCallback output data transfer complete callback + (+) HAL_CRYP_ErrorCallback CRYP error callback + (+) HAL_CRYP_GetState return the CRYP state + (+) HAL_CRYP_GetError return the CRYP error code +@endverbatim + * @{ + */ + +/** + * @brief This function handles cryptographic interrupt request. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval None + */ +void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp) +{ + uint32_t itsource = hcryp->Instance->CR; + uint32_t itflag = hcryp->Instance->SR; + + /* Check if error occurred */ + if ((itsource & CRYP_IT_ERRIE) == CRYP_IT_ERRIE) + { + /* If write Error occurred */ + if ((itflag & CRYP_IT_WRERR) == CRYP_IT_WRERR) + { + hcryp->ErrorCode |= HAL_CRYP_ERROR_WRITE; + } + /* If read Error occurred */ + if ((itflag & CRYP_IT_RDERR) == CRYP_IT_RDERR) + { + hcryp->ErrorCode |= HAL_CRYP_ERROR_READ; + } + } + + if ((itflag & CRYP_IT_CCF) == CRYP_IT_CCF) + { + if ((itsource & CRYP_IT_CCFIE) == CRYP_IT_CCFIE) + { + /* Clear computation complete flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + if ((hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC) || (hcryp->Init.Algorithm == CRYP_AES_CCM)) + { + + /* if header phase */ + if ((hcryp->Instance->CR & CRYP_PHASE_HEADER) == CRYP_PHASE_HEADER) + { + CRYP_GCMCCM_SetHeaderPhase_IT(hcryp); + } + else /* if payload phase */ + { + CRYP_GCMCCM_SetPayloadPhase_IT(hcryp); + } + } + else /* AES Algorithm ECB,CBC or CTR*/ + { + CRYP_AES_IT(hcryp); + } + } + } +} + +/** + * @brief Return the CRYP error code. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for the CRYP peripheral + * @retval CRYP error code + */ +uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp) +{ + return hcryp->ErrorCode; +} + +/** + * @brief Returns the CRYP state. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval HAL state + */ +HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp) +{ + return hcryp->State; +} + +/** + * @brief Input FIFO transfer completed callback. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval None + */ +__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_InCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Output FIFO transfer completed callback. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval None + */ +__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_OutCpltCallback can be implemented in the user file + */ +} + +/** + * @brief CRYP error callback. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval None + */ +__weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcryp); + + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_CRYP_ErrorCallback can be implemented in the user file + */ +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup CRYP_Private_Functions + * @{ + */ + +/** + * @brief Encryption in ECB/CBC & CTR Algorithm with AES Standard + * @param hcryp pointer to a CRYP_HandleTypeDef structure + * @param Timeout specify Timeout value + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint16_t incount; /* Temporary CrypInCount Value */ + uint16_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + while ((incount < (hcryp->Size / 4U)) && (outcount < (hcryp->Size / 4U))) + { + /* Write plain Ddta and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + } + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Encryption in ECB/CBC & CTR mode with AES Standard using interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Encrypt_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + if (hcryp->Size != 0U) + { + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Increment the pointer before writing the input block in the IN FIFO to make sure that + when Computation Completed IRQ fires, the hcryp->CrypInCount has always a consistent value + and it is ready for the next operation. */ + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + } + else + { + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Decryption in ECB/CBC & CTR mode with AES Standard + * @param hcryp pointer to a CRYP_HandleTypeDef structure + * @param Timeout Specify Timeout value + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint16_t incount; /* Temporary CrypInCount Value */ + uint16_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Key preparation for ECB/CBC */ + if (hcryp->Init.Algorithm != CRYP_AES_CTR) /*ECB or CBC*/ + { + if (hcryp->AutoKeyDerivation == DISABLE)/*Mode 2 Key preparation*/ + { + /* Set key preparation for decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION); + + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state & error code*/ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Return to decryption operating mode(Mode 3)*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + } + else /*Mode 4 : decryption & Key preparation*/ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set decryption & Key preparation operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT); + } + } + else /*Algorithm CTR */ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + /* Set IV */ + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + while ((incount < (hcryp->Size / 4U)) && (outcount < (hcryp->Size / 4U))) + { + /* Write plain data and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + } + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Return function status */ + return HAL_OK; +} +/** + * @brief Decryption in ECB/CBC & CTR mode with AES Standard using interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Decrypt_IT(CRYP_HandleTypeDef *hcryp) +{ + __IO uint32_t count = 0U; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Key preparation for ECB/CBC */ + if (hcryp->Init.Algorithm != CRYP_AES_CTR) + { + if (hcryp->AutoKeyDerivation == DISABLE)/*Mode 2 Key preparation*/ + { + /* Set key preparation for decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION); + + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF flag to be raised */ + count = CRYP_TIMEOUT_KEYPREPARATION; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Return to decryption operating mode(Mode 3)*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + } + else /*Mode 4 : decryption & key preparation*/ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set decryption & key preparation operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT); + } + } + else /*Algorithm CTR */ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + /* Set IV */ + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + if (hcryp->Size != 0U) + { + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Increment the pointer before writing the input block in the IN FIFO to make sure that + when Computation Completed IRQ fires, the hcryp->CrypInCount has always a consistent value + and it is ready for the next operation. */ + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + } + else + { + /* Process locked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + } + + /* Return function status */ + return HAL_OK; +} +/** + * @brief Decryption in ECB/CBC & CTR mode with AES Standard using DMA mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AES_Decrypt_DMA(CRYP_HandleTypeDef *hcryp) +{ + __IO uint32_t count = 0U; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + } + } + + if (DoKeyIVConfig == 1U) + { + /* Key preparation for ECB/CBC */ + if (hcryp->Init.Algorithm != CRYP_AES_CTR) + { + if (hcryp->AutoKeyDerivation == DISABLE)/*Mode 2 key preparation*/ + { + /* Set key preparation for decryption operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION); + + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Enable CRYP */ + __HAL_CRYP_ENABLE(hcryp); + + /* Wait for CCF flag to be raised */ + count = CRYP_TIMEOUT_KEYPREPARATION; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Return to decryption operating mode(Mode 3)*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_DECRYPT); + } + else /*Mode 4 : decryption & key preparation*/ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set decryption & Key preparation operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT); + } + } + else /*Algorithm CTR */ + { + /* Set the Key*/ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + } + + if (hcryp->Init.Algorithm != CRYP_AES_ECB) + { + /* Set the Initialization Vector*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + if (hcryp->Size != 0U) + { + /* Set the input and output addresses and start DMA transfer */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), (hcryp->Size / 4U), (uint32_t)(hcryp->pCrypOutBuffPtr)); + } + else + { + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + } + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief DMA CRYP input data process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma) +{ + CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + uint32_t loopcounter; + uint32_t headersize_in_bytes; + uint32_t tmp; + static const uint32_t mask[12U] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ + + /* Stop the DMA transfers to the IN FIFO by clearing to "0" the DMAINEN */ + CLEAR_BIT(hcryp->Instance->CR, AES_CR_DMAINEN); + + if (hcryp->Phase == CRYP_PHASE_HEADER_DMA_FEED) + { + /* DMA is disabled, CCF is meaningful. Wait for computation completion before moving forward */ + CRYP_ClearCCFlagWhenHigh(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE); + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + if ((headersize_in_bytes % 16U) != 0U) + { + /* Write last words that couldn't be fed by DMA */ + hcryp->CrypHeaderCount = (uint16_t)((headersize_in_bytes / 16U) * 4U); + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 4U) % 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + + /* Wait for computation completion before moving forward */ + CRYP_ClearCCFlagWhenHigh(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE); + } /* if ((headersize_in_bytes % 16U) != 0U) */ + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Initiate payload DMA IN and processed data DMA OUT transfers */ + (void)CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp); + } + else + { + uint32_t algo; + /* ECB, CBC or CTR end of input data feeding + or + end of GCM/CCM payload data feeding through DMA */ + algo = hcryp->Instance->CR & AES_CR_CHMOD; + + /* Don't call input data transfer complete callback only if + it remains some input data to write to the peripheral. + This case can only occur for GCM and CCM with a payload length + not a multiple of 16 bytes */ + if (!(((algo == CRYP_AES_GCM_GMAC) || (algo == CRYP_AES_CCM)) && \ + (((hcryp->Size) % 16U) != 0U))) + { + /* Call input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } /* if (hcryp->Phase == CRYP_PHASE_HEADER_DMA_FEED) */ +} + +/** + * @brief DMA CRYP output data process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma) +{ + uint32_t count; + uint32_t npblb; + uint32_t lastwordsize; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t mode; + + CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Stop the DMA transfers to the OUT FIFO by clearing to "0" the DMAOUTEN */ + CLEAR_BIT(hcryp->Instance->CR, AES_CR_DMAOUTEN); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Last block transfer in case of GCM or CCM with Size not %16*/ + if (((hcryp->Size) % 16U) != 0U) + { + /* set CrypInCount and CrypOutCount to exact number of word already computed via DMA */ + hcryp->CrypInCount = (hcryp->Size / 16U) * 4U; + hcryp->CrypOutCount = hcryp->CrypInCount; + + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + mode = hcryp->Instance->CR & AES_CR_MODE; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (count = 0U; count < lastwordsize; count++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (count < 4U) + { + /* Pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + count++; + } + /* Call input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + + /*Wait on CCF flag*/ + CRYP_ClearCCFlagWhenHigh(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE); + + /*Read the output block from the output FIFO */ + for (count = 0U; count < 4U; count++) + { + /* Read the output block from the output FIFO and put them in temporary buffer + then get CrypOutBuff from temporary buffer */ + temp[count] = hcryp->Instance->DOUTR; + } + + count = 0U; + while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (count < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[count]; + hcryp->CrypOutCount++; + count++; + } + } + + if (((hcryp->Init.Algorithm & CRYP_AES_GCM_GMAC) != CRYP_AES_GCM_GMAC) + && ((hcryp->Init.Algorithm & CRYP_AES_CCM) != CRYP_AES_CCM)) + { + /* Disable CRYP (not allowed in GCM)*/ + __HAL_CRYP_DISABLE(hcryp); + } + + /* Change the CRYP state to ready */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call output data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy weak Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA CRYP communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void CRYP_DMAError(DMA_HandleTypeDef *hdma) +{ + CRYP_HandleTypeDef *hcryp = (CRYP_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Call error callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ +} + +/** + * @brief Set the DMA configuration and start the DMA transfer + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param inputaddr address of the input buffer + * @param Size size of the input and output buffers in words, must be a multiple of 4 + * @param outputaddr address of the output buffer + * @retval None + */ +static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr) +{ + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt; + + /* Set the DMA input error callback */ + hcryp->hdmain->XferErrorCallback = CRYP_DMAError; + + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt; + + /* Set the DMA output error callback */ + hcryp->hdmaout->XferErrorCallback = CRYP_DMAError; + + if ((hcryp->Init.Algorithm & CRYP_AES_GCM_GMAC) != CRYP_AES_GCM_GMAC) + { + /* Enable CRYP (not allowed in GCM & CCM)*/ + __HAL_CRYP_ENABLE(hcryp); + } + + /* Enable the DMA input stream */ + if (HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DINR, Size) != HAL_OK) + { + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + + /* Call error callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + /* Enable the DMA output stream */ + if (HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUTR, outputaddr, Size) != HAL_OK) + { + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + + /* Call error callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + /* Enable In and Out DMA requests */ + SET_BIT(hcryp->Instance->CR, (AES_CR_DMAINEN | AES_CR_DMAOUTEN)); +} + +/** + * @brief Set the DMA configuration and start the header DMA transfer + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param inputaddr address of the input buffer + * @param Size size of the input buffer in words, must be a multiple of 4 + * @retval None + */ +static HAL_StatusTypeDef CRYP_SetHeaderDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size) +{ + /* Set the CRYP DMA transfer complete callback */ + hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt; + + /* Set the DMA input error callback */ + hcryp->hdmain->XferErrorCallback = CRYP_DMAError; + + /* Mark that header is fed to the peripheral in DMA mode */ + hcryp->Phase = CRYP_PHASE_HEADER_DMA_FEED; + /* Enable the DMA input stream */ + if (HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DINR, Size) != HAL_OK) + { + /* DMA error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_DMA; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + /* Call error callback */ + } + + /* Enable IN DMA requests */ + SET_BIT(hcryp->Instance->CR, AES_CR_DMAINEN); + + return HAL_OK; +} + +/** + * @brief Process Data: Write Input data in polling mode and used in AES functions. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Timeout Specify Timeout value + * @retval None + */ +static void CRYP_AES_ProcessData(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t i; + + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + /*Call registered error callback*/ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Read the output block from the output FIFO and put them in temporary buffer + then get CrypOutBuff from temporary buffer*/ + for (i = 0U; i < 4U; i++) + { + temp[i] = hcryp->Instance->DOUTR; + } + i = 0U; + while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (i < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } +} + +/** + * @brief Handle CRYP block input/output data handling under interruption. + * @note The function is called under interruption only, once + * interruptions have been enabled by HAL_CRYP_Encrypt_IT or HAL_CRYP_Decrypt_IT. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @retval HAL status + */ +static void CRYP_AES_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t i; + + if (hcryp->State == HAL_CRYP_STATE_BUSY) + { + /* Read the output block from the output FIFO and put them in temporary buffer + then get CrypOutBuff from temporary buffer*/ + for (i = 0U; i < 4U; i++) + { + temp[i] = hcryp->Instance->DOUTR; + } + i = 0U; + while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (i < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + if (hcryp->CrypOutCount == (hcryp->Size / 4U)) + { + /* Disable Computation Complete flag and errors interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call Output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy weak Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + else + { +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the payload */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + /* Mark that the payload phase is suspended */ + hcryp->Phase = CRYP_PHASE_PAYLOAD_SUSPENDED; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + if (hcryp->CrypInCount == (hcryp->Size / 4U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + } + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Writes Key in Key registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param KeySize Size of Key + * @note If pKey is NULL, the Key registers are not written. This configuration + * occurs when the key is written out of HAL scope. + * @retval None + */ +static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint32_t KeySize) +{ + if (hcryp->Init.pKey != NULL) + { + switch (KeySize) + { + case CRYP_KEYSIZE_256B: + hcryp->Instance->KEYR7 = *(uint32_t *)(hcryp->Init.pKey); + hcryp->Instance->KEYR6 = *(uint32_t *)(hcryp->Init.pKey + 1U); + hcryp->Instance->KEYR5 = *(uint32_t *)(hcryp->Init.pKey + 2U); + hcryp->Instance->KEYR4 = *(uint32_t *)(hcryp->Init.pKey + 3U); + hcryp->Instance->KEYR3 = *(uint32_t *)(hcryp->Init.pKey + 4U); + hcryp->Instance->KEYR2 = *(uint32_t *)(hcryp->Init.pKey + 5U); + hcryp->Instance->KEYR1 = *(uint32_t *)(hcryp->Init.pKey + 6U); + hcryp->Instance->KEYR0 = *(uint32_t *)(hcryp->Init.pKey + 7U); + break; + case CRYP_KEYSIZE_128B: + hcryp->Instance->KEYR3 = *(uint32_t *)(hcryp->Init.pKey); + hcryp->Instance->KEYR2 = *(uint32_t *)(hcryp->Init.pKey + 1U); + hcryp->Instance->KEYR1 = *(uint32_t *)(hcryp->Init.pKey + 2U); + hcryp->Instance->KEYR0 = *(uint32_t *)(hcryp->Init.pKey + 3U); + + break; + default: + break; + } + } +} + +/** + * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESGCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t wordsize = ((uint32_t)hcryp->Size / 4U) ; + uint32_t npblb; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t index; + uint32_t lastwordsize; + uint32_t incount; /* Temporary CrypInCount Value */ + uint32_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /****************************** Init phase **********************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked & return error */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /************************ Header phase *************************************/ + + if (CRYP_GCMCCM_SetHeaderPhase(hcryp, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /*************************Payload phase ************************************/ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + } /* if (DoKeyIVConfig == 1U) */ + + if ((hcryp->Size % 16U) != 0U) + { + /* recalculate wordsize */ + wordsize = ((wordsize / 4U) * 4U) ; + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Write input data and get output Data */ + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + while ((incount < wordsize) && (outcount < wordsize)) + { + /* Write plain data and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state & error code */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + } + + if ((hcryp->Size % 16U) != 0U) + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + /* Set Npblb in case of AES GCM payload encryption to get right tag*/ + if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + /* last block optionally pad the data with zeros*/ + for (index = 0U; index < lastwordsize; index ++) + { + /* Write the last Input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (index < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0U; + index++; + } + /* Wait for CCF flag to be raised */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + hcryp->State = HAL_CRYP_STATE_READY; + __HAL_UNLOCK(hcryp); + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /*Read the output block from the output FIFO */ + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer + then get CrypOutBuff from temporary buffer */ + temp[index] = hcryp->Instance->DOUTR; + } + for (index = 0U; index < lastwordsize; index++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + (hcryp->CrypOutCount)) = temp[index]; + hcryp->CrypOutCount++; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG in interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESGCM_Process_IT(CRYP_HandleTypeDef *hcryp) +{ + __IO uint32_t count = 0U; + uint32_t loopcounter; + uint32_t lastwordsize; + uint32_t npblb; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t headersize_in_bytes; + uint32_t tmp; + static const uint32_t mask[12U] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ + + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if ((hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) || (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED)) + { + CRYP_PhaseProcessingResume(hcryp); + return HAL_OK; + } +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + + /* Manage header size given in bytes to handle cases where + header size is not a multiple of 4 bytes */ + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + /* Configure Key, IV and process message (header and payload) */ + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /******************************* Init phase *********************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + count = CRYP_TIMEOUT_GCMCCMINITPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /***************************** Header phase *********************************/ + + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + if (hcryp->Init.HeaderSize == 0U) /*header phase is skipped*/ + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 16Bytes : first block is the last block*/ + { + /* Workaround not implemented for TinyAES2*/ + /* Size should be %4 otherwise Tag will be incorrectly generated for GCM Encryption: + Workaround is implemented in polling mode, so if last block of + payload <128bit do not use CRYP_Encrypt_IT otherwise TAG is incorrectly generated for GCM Encryption. */ + + + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - ((uint32_t)hcryp->Size); + + if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize ; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + /* Enter header data */ + /* Cher first whether header length is small enough to enter the full header in one shot */ + else if (headersize_in_bytes <= 16U) + { + /* Write header data, padded with zeros if need be */ + for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + hcryp->CrypHeaderCount++ ; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + } + else + { + /* Write the first input header block in the Input FIFO, + the following header data will be fed after interrupt occurrence */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } + + } /* end of if (DoKeyIVConfig == 1U) */ + else /* Key and IV have already been configured, + header has already been processed; + only process here message payload */ + { + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + } + else /* Size < 16Bytes : first block is the last block*/ + { + /* Workaround not implemented for TinyAES2*/ + /* Size should be %4 otherwise Tag will be incorrectly generated for GCM Encryption: + Workaround is implemented in polling mode, so if last block of + payload <128bit do not use CRYP_Encrypt_IT otherwise TAG is incorrectly generated for GCM Encryption. */ + + + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - ((uint32_t)hcryp->Size); + + if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) + { + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize ; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + } + } + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief Encryption/Decryption process in AES GCM mode and prepare the authentication TAG using DMA + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESGCM_Process_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint32_t count; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /*************************** Init phase ************************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector and the counter : Initial Counter Block (ICB)*/ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.pInitVect); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.pInitVect + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.pInitVect + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.pInitVect + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + count = CRYP_TIMEOUT_GCMCCMINITPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /************************ Header phase *************************************/ + + if (CRYP_GCMCCM_SetHeaderPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + + } + else + { + /* Initialization and header phases already done, only do payload phase */ + if (CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Return function status */ + return HAL_OK; +} + + +/** + * @brief AES CCM encryption/decryption processing in polling mode + * for TinyAES peripheral, no encrypt/decrypt performed, only authentication preparation. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESCCM_Process(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t wordsize = ((uint32_t)hcryp->Size / 4U) ; + uint32_t loopcounter; + uint32_t npblb; + uint32_t lastwordsize; + uint32_t temp[4] ; /* Temporary CrypOutBuff */ + uint32_t incount; /* Temporary CrypInCount Value */ + uint32_t outcount; /* Temporary CrypOutCount Value */ + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /********************** Init phase ******************************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector (IV) with B0 */ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.B0); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.B0 + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.B0 + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.B0 + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked & return error */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /************************ Header phase *************************************/ + /* Header block(B1) : associated data length expressed in bytes concatenated + with Associated Data (A)*/ + if (CRYP_GCMCCM_SetHeaderPhase(hcryp, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /*************************Payload phase ************************************/ + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + } /* if (DoKeyIVConfig == 1U) */ + + if ((hcryp->Size % 16U) != 0U) + { + /* recalculate wordsize */ + wordsize = ((wordsize / 4U) * 4U) ; + } + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Write input data and get output data */ + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + while ((incount < wordsize) && (outcount < wordsize)) + { + /* Write plain data and get cipher data */ + CRYP_AES_ProcessData(hcryp, Timeout); + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + } + + if ((hcryp->Size % 16U) != 0U) + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + if ((hcryp->Instance->CR & AES_CR_MODE) == CRYP_OPERATINGMODE_DECRYPT) + { + /* Set Npblb in case of AES CCM payload decryption to get right tag */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20); + + } + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Write the last input block in the IN FIFO */ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter ++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0U; + loopcounter++; + } + /* just wait for hash computation */ + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked & return error */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + for (loopcounter = 0U; loopcounter < 4U; loopcounter++) + { + /* Read the output block from the output FIFO and put them in temporary buffer + then get CrypOutBuff from temporary buffer */ + temp[loopcounter] = hcryp->Instance->DOUTR; + } + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[loopcounter]; + hcryp->CrypOutCount++; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief AES CCM encryption/decryption process in interrupt mode + * for TinyAES peripheral, no encrypt/decrypt performed, only authentication preparation. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESCCM_Process_IT(CRYP_HandleTypeDef *hcryp) +{ + __IO uint32_t count = 0U; + uint32_t loopcounter; + uint32_t lastwordsize; + uint32_t npblb; + uint32_t mode; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + uint32_t headersize_in_bytes; + uint32_t tmp; + static const uint32_t mask[12U] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + if ((hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) || (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED)) + { + CRYP_PhaseProcessingResume(hcryp); + return HAL_OK; + } +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + /* Configure Key, IV and process message (header and payload) */ + if (DoKeyIVConfig == 1U) + { + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + /********************** Init phase ******************************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector (IV) with B0 */ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.B0); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.B0 + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.B0 + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.B0 + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + count = CRYP_TIMEOUT_GCMCCMINITPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /***************************** Header phase *********************************/ + + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + if (headersize_in_bytes == 0U) /* Header phase is skipped */ + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + if (hcryp->Init.Algorithm == CRYP_AES_CCM) + { + /* Increment CrypHeaderCount to pass in CRYP_GCMCCM_SetPayloadPhase_IT */ + hcryp->CrypHeaderCount++; + } + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 4 words : first block is the last block*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)hcryp->Size; + + mode = hcryp->Instance->CR & AES_CR_MODE; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + /* Enter header data */ + /* Check first whether header length is small enough to enter the full header in one shot */ + else if (headersize_in_bytes <= 16U) + { + for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + hcryp->CrypHeaderCount++; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + else + { + /* Write the first input header block in the Input FIFO, + the following header data will be fed after interrupt occurrence */ + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount - 1U); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount - 1U); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount - 1U); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount - 1U); + }/* if (hcryp->Init.HeaderSize == 0U) */ /* Header phase is skipped*/ + } /* end of if (dokeyivconfig == 1U) */ + else /* Key and IV have already been configured, + header has already been processed; + only process here message payload */ + { + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + (hcryp->CrypInCount - 1U)); + + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 4 words : first block is the last block*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)hcryp->Size; + + mode = hcryp->Instance->CR & AES_CR_MODE; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + /* Call Input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief AES CCM encryption/decryption process in DMA mode + * for TinyAES peripheral, no encrypt/decrypt performed, only authentication preparation. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_AESCCM_Process_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint32_t count; + uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */ + + if (hcryp->Init.KeyIVConfigSkip == CRYP_KEYIVCONFIG_ONCE) + { + if (hcryp->KeyIVConfig == 1U) + { + /* If the Key and IV configuration has to be done only once + and if it has already been done, skip it */ + DoKeyIVConfig = 0U; + hcryp->SizesSum += hcryp->Size; /* Compute message total payload length */ + } + else + { + /* If the Key and IV configuration has to be done only once + and if it has not been done already, do it and set KeyIVConfig + to keep track it won't have to be done again next time */ + hcryp->KeyIVConfig = 1U; + hcryp->SizesSum = hcryp->Size; /* Merely store payload length */ + } + } + else + { + hcryp->SizesSum = hcryp->Size; + } + + if (DoKeyIVConfig == 1U) + { + + /* Reset CrypHeaderCount */ + hcryp->CrypHeaderCount = 0U; + + + /********************** Init phase ******************************************/ + + CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT); + + /* Set the key */ + CRYP_SetKey(hcryp, hcryp->Init.KeySize); + + /* Set the initialization vector (IV) with B0 */ + hcryp->Instance->IVR3 = *(uint32_t *)(hcryp->Init.B0); + hcryp->Instance->IVR2 = *(uint32_t *)(hcryp->Init.B0 + 1U); + hcryp->Instance->IVR1 = *(uint32_t *)(hcryp->Init.B0 + 2U); + hcryp->Instance->IVR0 = *(uint32_t *)(hcryp->Init.B0 + 3U); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* just wait for hash computation */ + count = CRYP_TIMEOUT_GCMCCMINITPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + + /********************* Header phase *****************************************/ + + if (CRYP_GCMCCM_SetHeaderPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + + } + else + { + /* Initialization and header phases already done, only do payload phase */ + if (CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + } /* if (DoKeyIVConfig == 1U) */ + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Sets the payload phase in interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval state + */ +static void CRYP_GCMCCM_SetPayloadPhase_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t lastwordsize; + uint32_t npblb; + uint32_t mode; + uint16_t incount; /* Temporary CrypInCount Value */ + uint16_t outcount; /* Temporary CrypOutCount Value */ + uint32_t i; + + /***************************** Payload phase *******************************/ + + /* Read the output block from the output FIFO and put them in temporary buffer + then get CrypOutBuff from temporary buffer*/ + for (i = 0U; i < 4U; i++) + { + temp[i] = hcryp->Instance->DOUTR; + } + i = 0U; + while ((hcryp->CrypOutCount < ((hcryp->Size + 3U) / 4U)) && (i < 4U)) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[i]; + hcryp->CrypOutCount++; + i++; + } + incount = hcryp->CrypInCount; + outcount = hcryp->CrypOutCount; + if ((outcount >= (hcryp->Size / 4U)) && ((incount * 4U) >= hcryp->Size)) + { + + /* When in CCM with Key and IV configuration skipped, don't disable interruptions */ + if (!((hcryp->Init.Algorithm == CRYP_AES_CCM) && (hcryp->KeyIVConfig == 1U))) + { + /* Disable computation complete flag and errors interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + } + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy weak Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + else if (((hcryp->Size / 4U) - (hcryp->CrypInCount)) >= 4U) + { + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the payload */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + /* Mark that the payload phase is suspended */ + hcryp->Phase = CRYP_PHASE_PAYLOAD_SUSPENDED; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + } + else /* Last block of payload < 128bit*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = ((((uint32_t)hcryp->Size / 16U) + 1U) * 16U) - ((uint32_t)hcryp->Size); + + mode = hcryp->Instance->CR & AES_CR_MODE; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + /* Call input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } +} + + +/** + * @brief Sets the payload phase in DMA mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @retval state + */ +static HAL_StatusTypeDef CRYP_GCMCCM_SetPayloadPhase_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint16_t wordsize = hcryp->Size / 4U ; + uint32_t index; + uint32_t npblb; + uint32_t lastwordsize; + uint32_t temp[4]; /* Temporary CrypOutBuff */ + uint32_t count; + uint32_t reg; + + /************************ Payload phase ************************************/ + if (hcryp->Size == 0U) + { + /* Process unLocked */ + __HAL_UNLOCK(hcryp); + + /* Change the CRYP state and phase */ + hcryp->State = HAL_CRYP_STATE_READY; + } + else if (hcryp->Size >= 16U) + { + /*DMA transfer must not include the last block in case of Size is not %16 */ + wordsize = wordsize - (wordsize % 4U); + + /*DMA transfer */ + CRYP_SetDMAConfig(hcryp, (uint32_t)(hcryp->pCrypInBuffPtr), wordsize, (uint32_t)(hcryp->pCrypOutBuffPtr)); + } + else /* length of input data is < 16 */ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - (uint32_t)hcryp->Size; + + /* Set Npblb in case of AES GCM payload encryption or AES CCM payload decryption to get right tag*/ + reg = hcryp->Instance->CR & (AES_CR_CHMOD | AES_CR_MODE); + if ((reg == (CRYP_AES_GCM_GMAC | CRYP_OPERATINGMODE_ENCRYPT)) || \ + (reg == (CRYP_AES_CCM | CRYP_OPERATINGMODE_DECRYPT))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* last block optionally pad the data with zeros*/ + for (index = 0U; index < lastwordsize; index ++) + { + /* Write the last Input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (index < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0U; + index++; + } + /* Call the input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + /* Wait for CCF flag to be raised */ + count = CRYP_TIMEOUT_GCMCCMHEADERPHASE; + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /*Read the output block from the output FIFO */ + for (index = 0U; index < 4U; index++) + { + /* Read the output block from the output FIFO and put them in temporary buffer + then get CrypOutBuff from temporary buffer */ + temp[index] = hcryp->Instance->DOUTR; + } + for (index = 0U; index < lastwordsize; index++) + { + *(uint32_t *)(hcryp->pCrypOutBuffPtr + hcryp->CrypOutCount) = temp[index]; + hcryp->CrypOutCount++; + } + + /* Change the CRYP state to ready */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Call Output transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Output complete callback*/ + hcryp->OutCpltCallback(hcryp); +#else + /*Call legacy weak Output complete callback*/ + HAL_CRYP_OutCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Sets the header phase in polling mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @param Timeout Timeout value + * @retval state + */ +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t loopcounter; + uint32_t size_in_bytes; + uint32_t tmp; + static const uint32_t mask[12U] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ + + /***************************** Header phase for GCM/GMAC or CCM *********************************/ + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + size_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + size_in_bytes = hcryp->Init.HeaderSize; + } + + if ((size_in_bytes != 0U)) + { + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* If size_in_bytes is a multiple of blocks (a multiple of four 32-bits words ) */ + if ((size_in_bytes % 16U) == 0U) + { + /* No padding */ + for (loopcounter = 0U; (loopcounter < (size_in_bytes / 4U)); loopcounter += 4U) + { + /* Write the input block in the data input register */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + } + } + else + { + /* Write header block in the IN FIFO without last block */ + for (loopcounter = 0U; (loopcounter < ((size_in_bytes / 16U) * 4U)); loopcounter += 4U) + { + /* Write the input block in the data input register */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + } + /* Write last complete words */ + for (loopcounter = 0U; (loopcounter < ((size_in_bytes / 4U) % 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((size_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (size_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + + if (CRYP_WaitOnCCFlag(hcryp, Timeout) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + } + } + else + { + /*Workaround 1: only AES, before re-enabling the peripheral, datatype can be configured.*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE, hcryp->Init.DataType); + + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Sets the header phase when using DMA in process + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @retval None + */ +static HAL_StatusTypeDef CRYP_GCMCCM_SetHeaderPhase_DMA(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; + uint32_t headersize_in_bytes; + uint32_t tmp; + static const uint32_t mask[12U] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ + + /***************************** Header phase for GCM/GMAC or CCM *********************************/ + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* If header size is at least equal to 16 bytes, feed the header through DMA. + If size_in_bytes is not a multiple of blocks (is not a multiple of four 32-bit words ), + last bytes feeding and padding will be done in CRYP_DMAInCplt() */ + if (headersize_in_bytes >= 16U) + { + /* Initiate header DMA transfer */ + if (CRYP_SetHeaderDMAConfig(hcryp, (uint32_t)(hcryp->Init.Header), + (uint16_t)((headersize_in_bytes / 16U) * 4U)) != HAL_OK) + { + return HAL_ERROR; + } + } + else + { + if (headersize_in_bytes != 0U) + { + /* Header length is larger than 0 and strictly less than 16 bytes */ + /* Write last complete words */ + for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + + if (CRYP_WaitOnCCFlag(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE) != HAL_OK) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + } /* if (headersize_in_bytes != 0U) */ + + /* Move to payload phase if header length is null or + if the header length was less than 16 and header written by software instead of DMA */ + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + /* Select payload phase once the header phase is performed */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD); + + /* Initiate payload DMA IN and processed data DMA OUT transfers */ + if (CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp) != HAL_OK) + { + return HAL_ERROR; + } + } /* if (headersize_in_bytes >= 16U) */ + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Sets the header phase in interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @retval None + */ +static void CRYP_GCMCCM_SetHeaderPhase_IT(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; + uint32_t lastwordsize; + uint32_t npblb; + uint32_t mode; + uint32_t headersize_in_bytes; + uint32_t tmp; + static const uint32_t mask[12U] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */ + 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */ + 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU + }; /* 8-bit data type */ + + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD) + { + headersize_in_bytes = hcryp->Init.HeaderSize * 4U; + } + else + { + headersize_in_bytes = hcryp->Init.HeaderSize; + } + + /***************************** Header phase *********************************/ + /* Test whether or not the header phase is over. + If the test below is true, move to payload phase */ + if (headersize_in_bytes <= ((uint32_t)(hcryp->CrypHeaderCount) * 4U)) + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + /* Select payload phase */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + if (hcryp->Init.Algorithm == CRYP_AES_CCM) + { + /* Increment CrypHeaderCount to pass in CRYP_GCMCCM_SetPayloadPhase_IT */ + hcryp->CrypHeaderCount++; + } + /* Write the payload Input block in the IN FIFO */ + if (hcryp->Size == 0U) + { + /* Disable interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else if (hcryp->Size >= 16U) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call the input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Size < 4 words : first block is the last block*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = 16U - ((uint32_t)hcryp->Size); + mode = hcryp->Instance->CR & AES_CR_MODE; + if (((mode == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + ((mode == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, npblb << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* Pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + /* Call the input data transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else if ((((headersize_in_bytes / 4U) - (hcryp->CrypHeaderCount)) >= 4U)) + { + /* Can enter full 4 header words */ +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) + /* If suspension flag has been raised, suspend processing + only if not already at the end of the header */ + if (hcryp->SuspendRequest == HAL_CRYP_SUSPEND) + { + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* reset SuspendRequest */ + hcryp->SuspendRequest = HAL_CRYP_SUSPEND_NONE; + /* Disable Computation Complete Flag and Errors Interrupts */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + /* Change the CRYP state */ + hcryp->State = HAL_CRYP_STATE_SUSPENDED; + /* Mark that the payload phase is suspended */ + hcryp->Phase = CRYP_PHASE_HEADER_SUSPENDED; + + /* Process Unlocked */ + __HAL_UNLOCK(hcryp); + } + else +#endif /* USE_HAL_CRYP_SUSPEND_RESUME */ + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } + } + else /* Write last header block (4 words), padded with zeros if needed */ + { + + for (loopcounter = 0U; (loopcounter < ((headersize_in_bytes / 4U) % 4U)); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + /* If the header size is a multiple of words */ + if ((headersize_in_bytes % 4U) == 0U) + { + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + else + { + /* Enter last bytes, padded with zeros */ + tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)]; + hcryp->Instance->DINR = tmp; + loopcounter++; + hcryp->CrypHeaderCount++; + /* Pad the data with zeros to have a complete block */ + while (loopcounter < 4U) + { + hcryp->Instance->DINR = 0x0U; + loopcounter++; + hcryp->CrypHeaderCount++; + } + } + } +} + +/** + * @brief Handle CRYP hardware block Timeout when waiting for CCF flag to be raised. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Timeout Timeout duration. + * @note This function can only be used in thread mode. + * @retval HAL status + */ +static HAL_StatusTypeDef CRYP_WaitOnCCFlag(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief Wait for Computation Complete Flag (CCF) to raise then clear it. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Timeout Timeout duration. + * @note This function can be used in thread or handler mode. + * @retval HAL status + */ +static void CRYP_ClearCCFlagWhenHigh(CRYP_HandleTypeDef *hcryp, uint32_t Timeout) +{ + uint32_t count = Timeout; + + do + { + count-- ; + if (count == 0U) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + hcryp->State = HAL_CRYP_STATE_READY; + +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U) + /*Call registered error callback*/ + hcryp->ErrorCallback(hcryp); +#else + /*Call legacy weak error callback*/ + HAL_CRYP_ErrorCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)); + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); +} + +#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U) +/** + * @brief In case of message processing suspension, read the Initialization Vector. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Output Pointer to the buffer containing the saved Initialization Vector. + * @note This value has to be stored for reuse by writing the AES_IVRx registers + * as soon as the suspended processing has to be resumed. + * @retval None + */ +static void CRYP_Read_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Output) +{ + uint32_t outputaddr = (uint32_t)Output; + + *(uint32_t *)(outputaddr) = hcryp->Instance->IVR3; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = hcryp->Instance->IVR2; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = hcryp->Instance->IVR1; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = hcryp->Instance->IVR0; +} + +/** + * @brief In case of message processing resumption, rewrite the Initialization + * Vector in the AES_IVRx registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Input Pointer to the buffer containing the saved Initialization Vector to + * write back in the CRYP hardware block. + * @note AES must be disabled when reconfiguring the IV values. + * @retval None + */ +static void CRYP_Write_IVRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Input) +{ + uint32_t ivaddr = (uint32_t)Input; + + hcryp->Instance->IVR3 = *(uint32_t *)(ivaddr); + ivaddr += 4U; + hcryp->Instance->IVR2 = *(uint32_t *)(ivaddr); + ivaddr += 4U; + hcryp->Instance->IVR1 = *(uint32_t *)(ivaddr); + ivaddr += 4U; + hcryp->Instance->IVR0 = *(uint32_t *)(ivaddr); +} + +/** + * @brief In case of message GCM/GMAC/CCM processing suspension, + * read the Suspend Registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Output Pointer to the buffer containing the saved Suspend Registers. + * @note These values have to be stored for reuse by writing back the AES_SUSPxR registers + * as soon as the suspended processing has to be resumed. + * @retval None + */ +static void CRYP_Read_SuspendRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Output) +{ + uint32_t outputaddr = (uint32_t)Output; + __IO uint32_t count = 0U; + + /* In case of GCM payload phase encryption, check that suspension can be carried out */ + if (READ_BIT(hcryp->Instance->CR, + (AES_CR_CHMOD | AES_CR_GCMPH | AES_CR_MODE)) == (CRYP_AES_GCM_GMAC | AES_CR_GCMPH_1 | 0x0U)) + { + + /* Wait for BUSY flag to be cleared */ + count = 0xFFF; + do + { + count-- ; + if (count == 0U) + { + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + HAL_CRYP_ErrorCallback(hcryp); + return; + } + } while (HAL_IS_BIT_SET(hcryp->Instance->SR, AES_SR_BUSY)); + + } + + + *(uint32_t *)(outputaddr) = hcryp->Instance->SUSP7R; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = hcryp->Instance->SUSP6R; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = hcryp->Instance->SUSP5R; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = hcryp->Instance->SUSP4R; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = hcryp->Instance->SUSP3R; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = hcryp->Instance->SUSP2R; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = hcryp->Instance->SUSP1R; + outputaddr += 4U; + *(uint32_t *)(outputaddr) = hcryp->Instance->SUSP0R; +} + +/** + * @brief In case of message GCM/GMAC/CCM processing resumption, rewrite the Suspend + * Registers in the AES_SUSPxR registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Input Pointer to the buffer containing the saved suspend registers to + * write back in the CRYP hardware block. + * @note AES must be disabled when reconfiguring the suspend registers. + * @retval None + */ +static void CRYP_Write_SuspendRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Input) +{ + uint32_t ivaddr = (uint32_t)Input; + + hcryp->Instance->SUSP7R = *(uint32_t *)(ivaddr); + ivaddr += 4U; + hcryp->Instance->SUSP6R = *(uint32_t *)(ivaddr); + ivaddr += 4U; + hcryp->Instance->SUSP5R = *(uint32_t *)(ivaddr); + ivaddr += 4U; + hcryp->Instance->SUSP4R = *(uint32_t *)(ivaddr); + ivaddr += 4U; + hcryp->Instance->SUSP3R = *(uint32_t *)(ivaddr); + ivaddr += 4U; + hcryp->Instance->SUSP2R = *(uint32_t *)(ivaddr); + ivaddr += 4U; + hcryp->Instance->SUSP1R = *(uint32_t *)(ivaddr); + ivaddr += 4U; + hcryp->Instance->SUSP0R = *(uint32_t *)(ivaddr); +} + +/** + * @brief In case of message GCM/GMAC/CCM processing suspension, read the Key Registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Output Pointer to the buffer containing the saved Key Registers. + * @param KeySize Indicates the key size (128 or 256 bits). + * @note These values have to be stored for reuse by writing back the AES_KEYRx registers + * as soon as the suspended processing has to be resumed. + * @retval None + */ +static void CRYP_Read_KeyRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Output, uint32_t KeySize) +{ + uint32_t keyaddr = (uint32_t)Output; + + switch (KeySize) + { + case CRYP_KEYSIZE_256B: + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey); + keyaddr += 4U; + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 1U); + keyaddr += 4U; + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 2U); + keyaddr += 4U; + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 3U); + keyaddr += 4U; + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 4U); + keyaddr += 4U; + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 5U); + keyaddr += 4U; + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 6U); + keyaddr += 4U; + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 7U); + break; + case CRYP_KEYSIZE_128B: + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey); + keyaddr += 4U; + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 1U); + keyaddr += 4U; + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 2U); + keyaddr += 4U; + *(uint32_t *)(keyaddr) = *(uint32_t *)(hcryp->Init.pKey + 3U); + break; + default: + break; + } +} + +/** + * @brief In case of message GCM/GMAC (CCM/CMAC when applicable) processing resumption, rewrite the Key + * Registers in the AES_KEYRx registers. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module. + * @param Input Pointer to the buffer containing the saved key registers to + * write back in the CRYP hardware block. + * @param KeySize Indicates the key size (128 or 256 bits) + * @note AES must be disabled when reconfiguring the Key registers. + * @retval None + */ +static void CRYP_Write_KeyRegisters(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint32_t KeySize) +{ + uint32_t keyaddr = (uint32_t)Input; + + if (KeySize == CRYP_KEYSIZE_256B) + { + hcryp->Instance->KEYR7 = *(uint32_t *)(keyaddr); + keyaddr += 4U; + hcryp->Instance->KEYR6 = *(uint32_t *)(keyaddr); + keyaddr += 4U; + hcryp->Instance->KEYR5 = *(uint32_t *)(keyaddr); + keyaddr += 4U; + hcryp->Instance->KEYR4 = *(uint32_t *)(keyaddr); + keyaddr += 4U; + } + + hcryp->Instance->KEYR3 = *(uint32_t *)(keyaddr); + keyaddr += 4U; + hcryp->Instance->KEYR2 = *(uint32_t *)(keyaddr); + keyaddr += 4U; + hcryp->Instance->KEYR1 = *(uint32_t *)(keyaddr); + keyaddr += 4U; + hcryp->Instance->KEYR0 = *(uint32_t *)(keyaddr); +} + +/** + * @brief Authentication phase resumption in case of GCM/GMAC/CCM process in interrupt mode + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module(Header & HeaderSize) + * @retval None + */ +static void CRYP_PhaseProcessingResume(CRYP_HandleTypeDef *hcryp) +{ + uint32_t loopcounter; + uint16_t lastwordsize; + uint16_t npblb; + uint32_t cr_temp; + + + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_ERR_CLEAR | CRYP_CCF_CLEAR); + + /* Enable computation complete flag and error interrupts */ + __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Enable the CRYP peripheral */ + __HAL_CRYP_ENABLE(hcryp); + + /* Case of header phase resumption =================================================*/ + if (hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) + { + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select header phase */ + CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER); + + if ((((hcryp->Init.HeaderSize) - (hcryp->CrypHeaderCount)) >= 4U)) + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++; + } + else /*HeaderSize < 4 or HeaderSize >4 & HeaderSize %4 != 0*/ + { + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < (hcryp->Init.HeaderSize % 4U); loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount); + hcryp->CrypHeaderCount++ ; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + } + /* Case of payload phase resumption =================================================*/ + else + { + if (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED) + { + + /* Set the phase */ + hcryp->Phase = CRYP_PHASE_PROCESS; + + /* Select payload phase once the header phase is performed */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_PAYLOAD); + + /* Set to 0 the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, 0U); + + if (((hcryp->Size / 4U) - (hcryp->CrypInCount)) >= 4U) + { + /* Write the input block in the IN FIFO */ + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U)) + { + /* Call input transfer complete callback */ +#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1) + /*Call registered Input complete callback*/ + hcryp->InCpltCallback(hcryp); +#else + /*Call legacy weak Input complete callback*/ + HAL_CRYP_InCpltCallback(hcryp); +#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */ + } + } + else /* Last block of payload < 128bit*/ + { + /* Compute the number of padding bytes in last block of payload */ + npblb = (((hcryp->Size / 16U) + 1U) * 16U) - (hcryp->Size); + cr_temp = hcryp->Instance->CR; + if ((((cr_temp & AES_CR_MODE) == CRYP_OPERATINGMODE_ENCRYPT) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC)) || + (((cr_temp & AES_CR_MODE) == CRYP_OPERATINGMODE_DECRYPT) && (hcryp->Init.Algorithm == CRYP_AES_CCM))) + { + /* Specify the number of non-valid bytes using NPBLB register*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_NPBLB, ((uint32_t)npblb) << 20U); + } + + /* Number of valid words (lastwordsize) in last block */ + if ((npblb % 4U) == 0U) + { + lastwordsize = (16U - npblb) / 4U; + } + else + { + lastwordsize = ((16U - npblb) / 4U) + 1U; + } + + /* Last block optionally pad the data with zeros*/ + for (loopcounter = 0U; loopcounter < lastwordsize; loopcounter++) + { + hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount); + hcryp->CrypInCount++; + } + while (loopcounter < 4U) + { + /* pad the data with zeros to have a complete block */ + hcryp->Instance->DINR = 0x0U; + loopcounter++; + } + } + } + } +} +#endif /* defined (USE_HAL_CRYP_SUSPEND_RESUME) */ +/** + * @} + */ + + +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#endif /* AES */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_cryp_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_cryp_ex.c new file mode 100644 index 0000000000..ce49e751fe --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_cryp_ex.c @@ -0,0 +1,386 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_cryp_ex.c + * @author MCD Application Team + * @brief CRYPEx HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the Cryptography (CRYP) peripheral. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup CRYPEx + * @{ + */ + +#if defined(AES) + +#ifdef HAL_CRYP_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup CRYPEx_Private_Defines + * @{ + */ + +#define CRYP_PHASE_INIT 0x00000000U /*!< GCM/GMAC (or CCM) init phase */ +#define CRYP_PHASE_HEADER AES_CR_GCMPH_0 /*!< GCM/GMAC or CCM header phase */ +#define CRYP_PHASE_PAYLOAD AES_CR_GCMPH_1 /*!< GCM(/CCM) payload phase */ +#define CRYP_PHASE_FINAL AES_CR_GCMPH /*!< GCM/GMAC or CCM final phase */ + +#define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U /*!< Encryption mode */ +#define CRYP_OPERATINGMODE_KEYDERIVATION AES_CR_MODE_0 /*!< Key derivation mode only used when performing ECB and CBC decryptions */ +#define CRYP_OPERATINGMODE_DECRYPT AES_CR_MODE_1 /*!< Decryption */ +#define CRYP_OPERATINGMODE_KEYDERIVATION_DECRYPT AES_CR_MODE /*!< Key derivation and decryption only used when performing ECB and CBC decryptions */ + +#define CRYPEx_PHASE_PROCESS 0x02U /*!< CRYP peripheral is in processing phase */ +#define CRYPEx_PHASE_FINAL 0x03U /*!< CRYP peripheral is in final phase this is relevant only with CCM and GCM modes */ + +/* CTR0 information to use in CCM algorithm */ +#define CRYP_CCM_CTR0_0 0x07FFFFFFU +#define CRYP_CCM_CTR0_3 0xFFFFFF00U + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions---------------------------------------------------------*/ +/** @addtogroup CRYPEx_Exported_Functions + * @{ + */ + +/** @defgroup CRYPEx_Exported_Functions_Group1 Extended AES processing functions + * @brief Extended processing functions. + * +@verbatim + ============================================================================== + ##### Extended AES processing functions ##### + ============================================================================== + [..] This section provides functions allowing to generate the authentication + TAG in Polling mode + (#)HAL_CRYPEx_AESGCM_GenerateAuthTAG + (#)HAL_CRYPEx_AESCCM_GenerateAuthTAG + they should be used after Encrypt/Decrypt operation. + +@endverbatim + * @{ + */ + +/** + * @brief generate the GCM authentication TAG. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param AuthTag Pointer to the authentication buffer + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout) +{ + uint32_t tickstart; + /* Assume first Init.HeaderSize is in words */ + uint64_t headerlength = (uint64_t)hcryp->Init.HeaderSize * 32U; /* Header length in bits */ + uint64_t inputlength = (uint64_t)hcryp->SizesSum * 8U; /* Input length in bits */ + uint32_t tagaddr = (uint32_t)AuthTag; + + /* Correct headerlength if Init.HeaderSize is actually in bytes */ + if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_BYTE) + { + headerlength /= 4U; + } + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if (hcryp->Phase == CRYPEx_PHASE_PROCESS) + { + /* Change the CRYP phase */ + hcryp->Phase = CRYPEx_PHASE_FINAL; + } + else /* Initialization phase has not been performed*/ + { + /* Disable the Peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Sequence error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE; + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + + /* Select final phase */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_FINAL); + + /* Set the encrypt operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + /*TinyAES peripheral from V3.1.1 : data has to be inserted normally (no swapping)*/ + /* Write into the AES_DINR register the number of bits in header (64 bits) + followed by the number of bits in the payload */ + + hcryp->Instance->DINR = 0U; + hcryp->Instance->DINR = (uint32_t)(headerlength); + hcryp->Instance->DINR = 0U; + hcryp->Instance->DINR = (uint32_t)(inputlength); + + /* Wait for CCF flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + + /* Read the authentication TAG in the output FIFO */ + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + + /* Clear CCF flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + /* Disable the peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + } + else + { + /* Busy error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @brief AES CCM Authentication TAG generation. + * @param hcryp pointer to a CRYP_HandleTypeDef structure that contains + * the configuration information for CRYP module + * @param AuthTag Pointer to the authentication buffer + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout) +{ + uint32_t tagaddr = (uint32_t)AuthTag; + uint32_t tickstart; + + if (hcryp->State == HAL_CRYP_STATE_READY) + { + /* Process locked */ + __HAL_LOCK(hcryp); + + /* Disable interrupts in case they were kept enabled to proceed + a single message in several iterations */ + __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_CCFIE | CRYP_IT_ERRIE); + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_BUSY; + + /* Check if initialization phase has already been performed */ + if (hcryp->Phase == CRYPEx_PHASE_PROCESS) + { + /* Change the CRYP phase */ + hcryp->Phase = CRYPEx_PHASE_FINAL; + } + else /* Initialization phase has not been performed*/ + { + /* Disable the peripheral */ + __HAL_CRYP_DISABLE(hcryp); + + /* Sequence error code field */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE; + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + /* Select final phase */ + MODIFY_REG(hcryp->Instance->CR, AES_CR_GCMPH, CRYP_PHASE_FINAL); + + /* Set encrypt operating mode*/ + MODIFY_REG(hcryp->Instance->CR, AES_CR_MODE, CRYP_OPERATINGMODE_ENCRYPT); + + /* Wait for CCF flag to be raised */ + tickstart = HAL_GetTick(); + while (HAL_IS_BIT_CLR(hcryp->Instance->SR, AES_SR_CCF)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable the CRYP peripheral Clock */ + __HAL_CRYP_DISABLE(hcryp); + + /* Change state */ + hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT; + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + return HAL_ERROR; + } + } + } + + /* Read the authentication TAG in the output FIFO */ + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + tagaddr += 4U; + *(uint32_t *)(tagaddr) = hcryp->Instance->DOUTR; + + /* Clear CCF Flag */ + __HAL_CRYP_CLEAR_FLAG(hcryp, CRYP_CCF_CLEAR); + + + /* Change the CRYP peripheral state */ + hcryp->State = HAL_CRYP_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcryp); + + /* Disable CRYP */ + __HAL_CRYP_DISABLE(hcryp); + } + else + { + /* Busy error code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; + return HAL_ERROR; + } + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup CRYPEx_Exported_Functions_Group2 Extended AES Key Derivations functions + * @brief Extended Key Derivations functions. + * +@verbatim + ============================================================================== + ##### Key Derivation functions ##### + ============================================================================== + [..] This section provides functions allowing to Enable or Disable the + the AutoKeyDerivation parameter in CRYP_HandleTypeDef structure + These function are allowed only in TinyAES peripheral. +@endverbatim + * @{ + */ + +/** + * @brief AES enable key derivation functions + * @param hcryp pointer to a CRYP_HandleTypeDef structure. + */ +void HAL_CRYPEx_EnableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp) +{ + if (hcryp->State == HAL_CRYP_STATE_READY) + { + hcryp->AutoKeyDerivation = ENABLE; + } + else + { + /* Busy error code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; + } +} +/** + * @brief AES disable key derivation functions + * @param hcryp pointer to a CRYP_HandleTypeDef structure. + */ +void HAL_CRYPEx_DisableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp) +{ + if (hcryp->State == HAL_CRYP_STATE_READY) + { + hcryp->AutoKeyDerivation = DISABLE; + } + else + { + /* Busy error code field */ + hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#endif /* AES */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_dac.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_dac.c new file mode 100644 index 0000000000..93bd22bb85 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_dac.c @@ -0,0 +1,1196 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_dac.c + * @author MCD Application Team + * @brief DAC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Digital to Analog Converter (DAC) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Errors functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### DAC Peripheral features ##### + ============================================================================== + [..] + *** DAC Channels *** + ==================== + [..] + #error "Please implement comment here for your STM32 series" + *** DAC Buffer mode feature *** + =============================== + [..] + Each DAC channel integrates an output buffer that can be used to + reduce the output impedance, and to drive external loads directly + without having to add an external operational amplifier. + To enable, the output buffer use + sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE; + [..] + (@) Refer to the device datasheet for more details about output + impedance value with and without output buffer. + + *** GPIO configurations guidelines *** + ===================== + [..] + When a DAC channel is used (ex channel1 on PA4) and the other is not + (ex channel2 on PA5 is configured in Analog and disabled). + Channel1 may disturb channel2 as coupling effect. + Note that there is no coupling on channel2 as soon as channel2 is turned on. + Coupling on adjacent channel could be avoided as follows: + when unused PA5 is configured as INPUT PULL-UP or DOWN. + PA5 is configured in ANALOG just before it is turned on. + + *** DAC wave generation feature *** + =================================== + [..] + Both DAC channels can be used to generate + (#) Noise wave + (#) Triangle wave + + *** DAC data format *** + ======================= + [..] + The DAC data format can be: + (#) 8-bit right alignment using DAC_ALIGN_8B_R + (#) 12-bit left alignment using DAC_ALIGN_12B_L + (#) 12-bit right alignment using DAC_ALIGN_12B_R + + *** DAC data value to voltage correspondence *** + ================================================ + [..] + The analog output voltage on each DAC channel pin is determined + by the following equation: + [..] + DAC_OUTx = VREF+ * DOR / 4095 + (+) with DOR is the Data Output Register + [..] + VREF+ is the input voltage reference (refer to the device datasheet) + [..] + e.g. To set DAC_OUT1 to 0.7V, use + (+) Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V + + *** DMA requests *** + ===================== + [..] + #error "Please implement comment here for your STM32 series" + + [..] + (@) For Dual mode and specific signal (Triangle and noise) generation please + refer to Extended Features Driver description + + ##### How to use this driver ##### + ============================================================================== + [..] + (+) DAC APB clock must be enabled to get write access to DAC + registers using HAL_DAC_Init() + #error "Please implement comment here for your STM32 series" + (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function. + (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA() functions. + + + *** Polling mode IO operation *** + ================================= + [..] + (+) Start the DAC peripheral using HAL_DAC_Start() + (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function. + (+) Stop the DAC peripheral using HAL_DAC_Stop() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length + of data to be transferred at each end of conversion + First issued trigger will start the conversion of the value previously set by HAL_DAC_SetValue(). + (+) At the middle of data transfer HAL_DAC_ConvHalfCpltCallbackCh1() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_ConvHalfCpltCallbackCh1() + (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1() + function is executed and user can add his own code by customization of function pointer + HAL_DAC_ConvCpltCallbackCh1() + (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can + add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1 + #error "Please implement comment here for your STM32 series" + (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA() + + *** Callback registration *** + ============================================= + [..] + The compilation define USE_HAL_DAC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + Use Functions HAL_DAC_RegisterCallback() to register a user callback, + it allows to register following callbacks: + (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. + (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. + (+) ErrorCallbackCh1 : callback when an error occurs on Ch1. + (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1. + (+) MspInitCallback : DAC MspInit. + (+) MspDeInitCallback : DAC MspdeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + Use function HAL_DAC_UnRegisterCallback() to reset a callback to the default + weak (overridden) function. It allows to reset following callbacks: + (+) ConvCpltCallbackCh1 : callback when a half transfer is completed on Ch1. + (+) ConvHalfCpltCallbackCh1 : callback when a transfer is completed on Ch1. + (+) ErrorCallbackCh1 : callback when an error occurs on Ch1. + (+) DMAUnderrunCallbackCh1 : callback when an underrun error occurs on Ch1. + (+) MspInitCallback : DAC MspInit. + (+) MspDeInitCallback : DAC MspdeInit. + (+) All Callbacks + This function) takes as parameters the HAL peripheral handle and the Callback ID. + + By default, after the HAL_DAC_Init and if the state is HAL_DAC_STATE_RESET + all callbacks are reset to the corresponding legacy weak (overridden) functions. + Exception done for MspInit and MspDeInit callbacks that are respectively + reset to the legacy weak (overridden) functions in the HAL_DAC_Init + and HAL_DAC_DeInit only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_DAC_Init and HAL_DAC_DeInit + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) + + Callbacks can be registered/unregistered in READY state only. + Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered + in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used + during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_DAC_RegisterCallback before calling HAL_DAC_DeInit + or HAL_DAC_Init function. + + When The compilation define USE_HAL_DAC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (overridden) callbacks are used. + + *** DAC HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in DAC HAL driver. + + (+) __HAL_DAC_ENABLE : Enable the DAC peripheral + (+) __HAL_DAC_DISABLE : Disable the DAC peripheral + (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags + (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status + + [..] + (@) You can refer to the DAC HAL driver header file for more useful macros + +@endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +#ifdef HAL_DAC_MODULE_ENABLED +#if defined(DAC1) + +/** @defgroup DAC DAC + * @brief DAC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions -------------------------------------------------------*/ + +/** @defgroup DAC_Exported_Functions DAC Exported Functions + * @{ + */ + +/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the DAC. + (+) De-initialize the DAC. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DAC peripheral according to the specified parameters + * in the DAC_InitStruct and initialize the associated handle. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac) +{ + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); + + if (hdac->State == HAL_DAC_STATE_RESET) + { +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + /* Init the DAC Callback settings */ + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; + if (hdac->MspInitCallback == NULL) + { + hdac->MspInitCallback = HAL_DAC_MspInit; + } +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + /* Allocate lock resource and initialize it */ + hdac->Lock = HAL_UNLOCKED; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + /* Init the low level hardware */ + hdac->MspInitCallback(hdac); +#else + /* Init the low level hardware */ + HAL_DAC_MspInit(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + + /* Initialize the DAC state*/ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Set DAC error code to none */ + hdac->ErrorCode = HAL_DAC_ERROR_NONE; + + /* Initialize the DAC state*/ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Deinitialize the DAC peripheral registers to their default reset values. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac) +{ + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + if (hdac->MspDeInitCallback == NULL) + { + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + } + /* DeInit the low level hardware */ + hdac->MspDeInitCallback(hdac); +#else + /* DeInit the low level hardware */ + HAL_DAC_MspDeInit(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + /* Set DAC error code to none */ + hdac->ErrorCode = HAL_DAC_ERROR_NONE; + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initialize the DAC MSP. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the DAC MSP. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable DMA transfer. + (+) Get result of conversion. + +@endverbatim + * @{ + */ + +/** + * @brief Enables DAC and starts conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the Peripheral */ + __HAL_DAC_ENABLE(hdac, Channel); + + /* Check if software trigger enabled */ + if ((hdac->Instance->CR & (DAC_CR_TEN | DAC_CR_TSEL)) == DAC_TRIGGER_SOFTWARE) + { + /* Enable the selected DAC software conversion */ + SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG); + } + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Disables DAC and stop conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Disable the Peripheral */ + __HAL_DAC_DISABLE(hdac, Channel); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enables DAC and starts conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to DAC peripheral + * @param Alignment Specifies the data alignment for DAC channel. + * This parameter can be one of the following values: + * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected + * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected + * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, const uint32_t *pData, uint32_t Length, + uint32_t Alignment) +{ + HAL_StatusTypeDef status; + uint32_t tmpreg = 0U; + + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_ALIGN(Alignment)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + if (Channel == DAC_CHANNEL_1) + { + /* Set the DMA transfer complete callback for channel1 */ + hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1; + + /* Set the DMA half transfer complete callback for channel1 */ + hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1; + + /* Set the DMA error callback for channel1 */ + hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1; + + /* Enable the selected DAC channel1 DMA request */ + SET_BIT(hdac->Instance->CR, DAC_CR_DMAEN); + + tmpreg = (uint32_t)(&(hdac->Instance->DHR)); + } + + /* Enable the DAC DMA underrun interrupt */ + __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR); + + /* Enable the DMA Stream */ + status = HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length); + + /* Process Unlocked */ + __HAL_UNLOCK(hdac); + + if (status == HAL_OK) + { + /* Enable the Peripheral */ + __HAL_DAC_ENABLE(hdac, Channel); + } + else + { + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + } + + /* Return function status */ + return status; +} + +/** + * @brief Disables DAC and stop conversion of channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Disable the selected DAC channel DMA request */ + hdac->Instance->CR &= ~(DAC_CR_DMAEN << (Channel & 0x10UL)); + + /* Disable the Peripheral */ + __HAL_DAC_DISABLE(hdac, Channel); + + /* Disable the DMA Stream */ + + /* Disable the DMA channel */ + (void)HAL_DMA_Abort(hdac->DMA_Handle1); + + /* Disable the DAC DMA underrun interrupt */ + __HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Handles DAC interrupt request + * This function uses the interruption of DMA + * underrun. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac) +{ + uint32_t itsource = hdac->Instance->CR; + uint32_t itflag = hdac->Instance->SR; + + if ((itsource & DAC_IT_DMAUDR) == DAC_IT_DMAUDR) + { + /* Check underrun flag of DAC channel 1 */ + if ((itflag & DAC_FLAG_DMAUDR) == DAC_FLAG_DMAUDR) + { + /* Change DAC state to error state */ + hdac->State = HAL_DAC_STATE_ERROR; + + /* Set DAC error code to channel1 DMA underrun error */ + SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH1); + + /* Clear the underrun flag */ + __HAL_DAC_CLEAR_FLAG(hdac, DAC_FLAG_DMAUDR); + + /* Disable the selected DAC channel1 DMA request */ + __HAL_DAC_DISABLE_IT(hdac, DAC_CR_DMAEN); + + /* Error callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->DMAUnderrunCallbackCh1(hdac); +#else + HAL_DAC_DMAUnderrunCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief Set the specified data holding register value for DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @param Alignment Specifies the data alignment. + * This parameter can be one of the following values: + * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected + * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected + * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected + * @param Data Data to be loaded in the selected data holding register. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data) +{ + __IO uint32_t tmp = 0UL; + + UNUSED(Alignment); + + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_ALIGN(Alignment)); + assert_param(IS_DAC_DATA(Data)); + + tmp = (uint32_t)(&(hdac->Instance->DHR)); + + /* Set the DAC channel selected data holding register */ + *(__IO uint32_t *) tmp = Data; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Conversion complete callback in non-blocking mode for Channel1 + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ConvCpltCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief Conversion half DMA transfer callback in non-blocking mode for Channel1 + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief Error DAC callback for Channel1. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file + */ +} + +/** + * @brief DMA underrun DAC callback for channel1. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval None + */ +__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hdac); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Configure channels. + (+) Set the specified data holding register value for DAC channel. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the last data output value of the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @retval The selected DAC channel data output value. + */ +uint32_t HAL_DAC_GetValue(const DAC_HandleTypeDef *hdac, uint32_t Channel) +{ + uint32_t result; + + /* Check the DAC peripheral handle */ + assert_param(hdac != NULL); + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + + result = hdac->Instance->DOR; + + /* Returns the DAC channel data output register value */ + return result; +} + +/** + * @brief Configures the selected DAC channel. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param sConfig DAC configuration structure. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, + const DAC_ChannelConfTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpreg1; + uint32_t tmpreg2; + + /* Check the DAC peripheral handle and channel configuration struct */ + if ((hdac == NULL) || (sConfig == NULL)) + { + return HAL_ERROR; + } + + /* Check the DAC parameters */ + assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger)); + assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer)); + assert_param(IS_DAC_CHANNEL(Channel)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Configure for the selected DAC channel: mode, buffer output & on chip peripheral connect */ + + + if (sConfig->DAC_ConnectOnChipPeripheral == DAC_CHIPCONNECT_EXTERNAL) + { + tmpreg2 = (sConfig->DAC_OutputBuffer); + } + else /* DAC_CHIPCONNECT_INTERNAL || DAC_CHIPCONNECT_BOTH */ + { + tmpreg2 = (sConfig->DAC_OutputBuffer | DAC_CR_CMPEN); + } + /* DAC in normal operating mode hence clear DAC_CR_CENx bit */ + CLEAR_BIT(hdac->Instance->CR, DAC_CR_EN << (Channel & 0x10UL)); + + /* Get the DAC CR value */ + tmpreg1 = hdac->Instance->CR; + + /* Clear TENx, TSELx, WAVEx and MAMPx bits */ + tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP | DAC_CR_WAVE | DAC_CR_TSEL | DAC_CR_TEN)) << (Channel & 0x10UL)); + + /* Configure for the selected DAC channel: trigger */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + tmpreg2 |= sConfig->DAC_Trigger; + /* Calculate CR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << (Channel & 0x10UL); + /* Write to DAC CR */ + hdac->Instance->CR = tmpreg1; + /* Get the DAC CR value */ + tmpreg1 = hdac->Instance->CR; + /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ + tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP | DAC_CR_WAVE | DAC_CR_TSEL | DAC_CR_TEN | DAC_CR_BON)) + << (Channel & 0x10UL)); + /* Configure for the selected DAC channel: buffer output, trigger */ + /* Set TSELx and TENx bits according to DAC_Trigger value */ + /* Set BOFFx bit according to DAC_OutputBuffer value */ + tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer); + /* Calculate CR register value depending on DAC_Channel */ + tmpreg1 |= tmpreg2 << (Channel & 0x10UL); + /* Write to DAC CR */ + hdac->Instance->CR = tmpreg1; + /* Disable wave generation */ + CLEAR_BIT(hdac->Instance->CR, (DAC_CR_WAVE << (Channel & 0x10UL))); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DAC state. + (+) Check the DAC Errors. + +@endverbatim + * @{ + */ + +/** + * @brief return the DAC handle state + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL state + */ +HAL_DAC_StateTypeDef HAL_DAC_GetState(const DAC_HandleTypeDef *hdac) +{ + /* Return DAC handle state */ + return hdac->State; +} + + +/** + * @brief Return the DAC error code + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval DAC Error Code + */ +uint32_t HAL_DAC_GetError(const DAC_HandleTypeDef *hdac) +{ + return hdac->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DAC_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_Exported_Functions_Group1 + * @{ + */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User DAC Callback + * To be used instead of the weak (overridden) predefined callback + * @note The HAL_DAC_RegisterCallback() may be called before HAL_DAC_Init() in HAL_DAC_STATE_RESET to register + * callbacks for HAL_DAC_MSPINIT_CB_ID and HAL_DAC_MSPDEINIT_CB_ID + * @param hdac DAC handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_DAC_ERROR_INVALID_CALLBACK DAC Error Callback ID + * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 Complete Callback ID + * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID + * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID + * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID + * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID + * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID + * + * @param pCallback pointer to the Callback function + * @retval status + */ +HAL_StatusTypeDef HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID, + pDAC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + if (pCallback == NULL) + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + return HAL_ERROR; + } + + if (hdac->State == HAL_DAC_STATE_READY) + { + switch (CallbackID) + { + case HAL_DAC_CH1_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_ERROR_ID : + hdac->ErrorCallbackCh1 = pCallback; + break; + case HAL_DAC_CH1_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh1 = pCallback; + break; + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = pCallback; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hdac->State == HAL_DAC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = pCallback; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = pCallback; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a User DAC Callback + * DAC Callback is redirected to the weak (overridden) predefined callback + * @note The HAL_DAC_UnRegisterCallback() may be called before HAL_DAC_Init() in HAL_DAC_STATE_RESET to un-register + * callbacks for HAL_DAC_MSPINIT_CB_ID and HAL_DAC_MSPDEINIT_CB_ID + * @param hdac DAC handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 transfer Complete Callback ID + * @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID + * @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID + * @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID + * @arg @ref HAL_DAC_MSPINIT_CB_ID DAC MSP Init Callback ID + * @arg @ref HAL_DAC_MSPDEINIT_CB_ID DAC MSP DeInit Callback ID + * @arg @ref HAL_DAC_ALL_CB_ID DAC All callbacks + * @retval status + */ +HAL_StatusTypeDef HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + if (hdac->State == HAL_DAC_STATE_READY) + { + switch (CallbackID) + { + case HAL_DAC_CH1_COMPLETE_CB_ID : + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + break; + case HAL_DAC_CH1_HALF_COMPLETE_CB_ID : + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + break; + case HAL_DAC_CH1_ERROR_ID : + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + break; + case HAL_DAC_CH1_UNDERRUN_CB_ID : + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; + break; + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = HAL_DAC_MspInit; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + case HAL_DAC_ALL_CB_ID : + hdac->ConvCpltCallbackCh1 = HAL_DAC_ConvCpltCallbackCh1; + hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1; + hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1; + hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1; + hdac->MspInitCallback = HAL_DAC_MspInit; + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else if (hdac->State == HAL_DAC_STATE_RESET) + { + switch (CallbackID) + { + case HAL_DAC_MSPINIT_CB_ID : + hdac->MspInitCallback = HAL_DAC_MspInit; + break; + case HAL_DAC_MSPDEINIT_CB_ID : + hdac->MspDeInitCallback = HAL_DAC_MspDeInit; + break; + default : + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hdac->ErrorCode |= HAL_DAC_ERROR_INVALID_CALLBACK; + /* update return status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DAC_Private_Functions + * @{ + */ + +/** + * @brief DMA conversion complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvCpltCallbackCh1(hdac); +#else + HAL_DAC_ConvCpltCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @brief DMA half transfer complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + /* Conversion complete callback */ +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ConvHalfCpltCallbackCh1(hdac); +#else + HAL_DAC_ConvHalfCpltCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA error callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma) +{ + DAC_HandleTypeDef *hdac = (DAC_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + /* Set DAC error code to DMA error */ + hdac->ErrorCode |= HAL_DAC_ERROR_DMA; + +#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) + hdac->ErrorCallbackCh1(hdac); +#else + HAL_DAC_ErrorCallbackCh1(hdac); +#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ + + hdac->State = HAL_DAC_STATE_READY; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +#endif /* HAL_DAC_MODULE_ENABLED */ +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_dac_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_dac_ex.c new file mode 100644 index 0000000000..9a75c39fcb --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_dac_ex.c @@ -0,0 +1,275 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_dac_ex.c + * @author MCD Application Team + * @brief Extended DAC HAL module driver. + * This file provides firmware functions to manage the extended + * functionalities of the DAC peripheral. + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + *** Signal generation operation *** + =================================== + [..] + (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal. + (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal. + + @endverbatim + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +#ifdef HAL_DAC_MODULE_ENABLED + +#if defined(DAC1) + +/** @defgroup DACEx DACEx + * @brief DAC Extended HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup DACEx_Exported_Functions DACEx Exported Functions + * @{ + */ + +/** @defgroup DACEx_Exported_Functions_Group2 IO operation functions + * @brief Extended IO operation functions + * +@verbatim + ============================================================================== + ##### Extended features functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Start conversion. + (+) Stop conversion. + (+) Start conversion and enable DMA transfer. + (+) Stop conversion and disable DMA transfer. + (+) Get result of conversion. + (+) Get result of dual mode conversion. + +@endverbatim + * @{ + */ + +/** + * @brief Enable or disable the selected DAC channel wave generation. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @param Amplitude Select max triangle amplitude. + * This parameter can be one of the following values: + * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1 + * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3 + * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7 + * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15 + * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31 + * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude) +{ + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the triangle wave generation for the selected DAC channel */ + MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE) | (DAC_CR_MAMP)) << (Channel & 0x10UL), + (DAC_CR_WAVE_1 | Amplitude) << (Channel & 0x10UL)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enable or disable the selected DAC channel wave generation. + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @param Channel The selected DAC channel. + * This parameter can be one of the following values: + * @arg DAC_CHANNEL_1: DAC Channel1 selected + * @param Amplitude Unmask DAC channel LFSR for noise wave generation. + * This parameter can be one of the following values: + * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation + * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation + * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude) +{ + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DAC_CHANNEL(Channel)); + assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); + + /* Process locked */ + __HAL_LOCK(hdac); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_BUSY; + + /* Enable the noise wave generation for the selected DAC channel */ + MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE) | (DAC_CR_MAMP)) << (Channel & 0x10UL), + (DAC_CR_WAVE_0 | Amplitude) << (Channel & 0x10UL)); + + /* Change DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hdac); + + /* Return function status */ + return HAL_OK; +} + + +/** + * @} + */ + +/** + * @brief Enable the VCM Buffer output + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_EnableVCMBuffer(DAC_HandleTypeDef *hdac) +{ + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + if (hdac->State == HAL_DAC_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hdac); + + hdac->State = HAL_DAC_STATE_BUSY; + + SET_BIT(hdac->Instance->CR, (DAC_CR_VCMON | DAC_CR_VCMEN)); + + /* Update the DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdac); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the VCM Buffer output + * @param hdac pointer to a DAC_HandleTypeDef structure that contains + * the configuration information for the specified DAC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DACEx_DisableVCMBuffer(DAC_HandleTypeDef *hdac) +{ + /* Check the DAC peripheral handle */ + if (hdac == NULL) + { + return HAL_ERROR; + } + + if (hdac->State == HAL_DAC_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hdac); + + hdac->State = HAL_DAC_STATE_BUSY; + + CLEAR_BIT(hdac->Instance->CR, (DAC_CR_VCMON | DAC_CR_VCMEN)); + + /* Update the DAC state */ + hdac->State = HAL_DAC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdac); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +#endif /* HAL_DAC_MODULE_ENABLED */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_dma.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_dma.c new file mode 100644 index 0000000000..83ba6e6b57 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_dma.c @@ -0,0 +1,900 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_dma.c + * @author MCD Application Team + * @brief DMA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Direct Memory Access (DMA) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable and configure the peripheral to be connected to the DMA Channel + (except for internal SRAM / FLASH memories: no initialization is + necessary). Please refer to the Reference manual for connection between peripherals + and DMA requests. + + (#) For a given Channel, program the required configuration through the following parameters: + Channel request, Transfer Direction, Source and Destination data formats, + Circular or Normal mode, Channel Priority level, Source and Destination Increment mode + using HAL_DMA_Init() function. + + Prior to HAL_DMA_Init the peripheral clock shall be enabled for both DMA & DMAMUX + thanks to: + DMA1 : __HAL_RCC_DMA1_CLK_ENABLE() + + (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error + detection. + + (#) Use HAL_DMA_Abort() function to abort the current transfer + + -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. + + *** Polling mode IO operation *** + ================================= + [..] + (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source + address and destination address and the Length of data to be transferred + (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this + case a fixed Timeout can be configured by User depending from his application. + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() + (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() + (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of + Source address and destination address and the Length of data to be transferred. + In this case the DMA interrupt is configured + (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine + (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can + add his own function by customization of function pointer XferCpltCallback and + XferErrorCallback (i.e. a member of DMA handle structure). + + *** DMA HAL driver macros list *** + ============================================= + [..] + Below the list of macros in DMA HAL driver. + + (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. + (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. + (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. + (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. + (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. + (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. + (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt is enabled or not. + + [..] + (@) You can refer to the DMA HAL driver header file for more useful macros + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup DMA DMA + * @brief DMA HAL module driver + * @{ + */ + +#ifdef HAL_DMA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup DMA_Private_Functions DMA Private Functions + * @{ + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); + +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Functions DMA Exported Functions + * @{ + */ + +/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to initialize the DMA Channel source + and destination addresses, incrementation and data sizes, transfer direction, + circular/normal mode selection, memory-to-memory mode selection and Channel priority value. + [..] + The HAL_DMA_Init() function follows the DMA configuration procedures as described in + reference manual. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the DMA according to the specified + * parameters in the DMA_InitTypeDef and initialize the associated handle. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) +{ + uint32_t tmp; + + /* Check the DMA handle allocation */ + if (hdma == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); + assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); + assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); + assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); + assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); + assert_param(IS_DMA_MODE(hdma->Init.Mode)); + assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); + + assert_param(IS_DMA_ALL_REQUEST(hdma->Init.Request)); + + /* DMA1 Channel Index */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; + + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + + /* Get the CR register value */ + tmp = hdma->Instance->CCR; + + /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR and MEM2MEM bits */ + tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | + DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | + DMA_CCR_DIR | DMA_CCR_MEM2MEM)); + + /* Prepare the DMA Channel configuration */ + tmp |= hdma->Init.Direction | + hdma->Init.PeriphInc | hdma->Init.MemInc | + hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | + hdma->Init.Mode | hdma->Init.Priority; + + /* Write to DMA Channel CR register */ + hdma->Instance->CCR = tmp; + + /* Initialize DMAmuxChannel */ + hdma->DMAmuxChannel = (DMAMUX1_Channel0 + (hdma->ChannelIndex >> 2U)); + + if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY) + { + /* if memory to memory force the request to 0*/ + hdma->Init.Request = DMA_REQUEST_MEM2MEM; + } + + /* Set peripheral request to DMAMUX channel */ + hdma->DMAmuxChannel->CxCR = (hdma->Init.Request & DMAMUX_CxCR_DMAREQ_ID); + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state*/ + hdma->State = HAL_DMA_STATE_READY; + + /* Allocate lock resource and initialize it */ + hdma->Lock = HAL_UNLOCKED; + + return HAL_OK; +} + +/** + * @brief DeInitialize the DMA peripheral. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) +{ + + /* Check the DMA handle allocation */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); + + /* Disable the selected DMA Channelx */ + __HAL_DMA_DISABLE(hdma); + + /* DMA1 Channel Index */ + hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2; + hdma->DmaBaseAddress = DMA1; + + /* Reset DMA Channel control register */ + hdma->Instance->CCR = 0U; + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x3cU)); + + /* Initialize DMAmuxChannel */ + hdma->DMAmuxChannel = (DMAMUX1_Channel0 + (hdma->ChannelIndex >> 2U)); + + /* Reset the DMAMUX channel that corresponds to the DMA channel */ + hdma->DMAmuxChannel->CxCR = 0U; + + /* Clean callbacks */ + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + + /* Initialize the error code */ + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Initialize the DMA state */ + hdma->State = HAL_DMA_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions + * @brief Input and Output operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure the source, destination address and data length and Start DMA transfer + (+) Configure the source, destination address and data length and + Start DMA transfer with interrupt + (+) Abort DMA transfer + (+) Poll for transfer complete + (+) Handle DMA interrupt request + +@endverbatim + * @{ + */ + +/** + * @brief Start the DMA Transfer. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Start the DMA Transfer with interrupt enabled. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_DMA_BUFFER_SIZE(DataLength)); + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + /* Change DMA peripheral state */ + hdma->State = HAL_DMA_STATE_BUSY; + hdma->ErrorCode = HAL_DMA_ERROR_NONE; + + /* Disable the peripheral */ + __HAL_DMA_DISABLE(hdma); + + /* Configure the source, destination address and the data length & clear flags*/ + DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); + + /* Enable the transfer complete interrupt */ + /* Enable the transfer Error interrupt */ + if (NULL != hdma->XferHalfCpltCallback) + { + /* Enable the Half transfer complete interrupt as well */ + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + } + else + { + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + __HAL_DMA_ENABLE_IT(hdma, (DMA_IT_TC | DMA_IT_TE)); + } + + /* Enable the Peripheral */ + __HAL_DMA_ENABLE(hdma); + } + else + { + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Remain BUSY */ + status = HAL_BUSY; + } + return status; +} + +/** + * @brief Abort the DMA Transfer. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) +{ + + /* Check the DMA peripheral handle */ + if (NULL == hdma) + { + return HAL_ERROR; + } + + /* Check the DMA peripheral state */ + if (hdma->State != HAL_DMA_STATE_BUSY) + { + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x3cU)); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + } + + return HAL_OK; +} + +/** + * @brief Aborts the DMA Transfer in Interrupt mode. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_Abort_IT(DMA_HandleTypeDef *hdma) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + + status = HAL_ERROR; + } + else + { + /* Disable DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Disable the channel */ + __HAL_DMA_DISABLE(hdma); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x3cU)); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + /* Call User Abort callback */ + if (hdma->XferAbortCallback != NULL) + { + hdma->XferAbortCallback(hdma); + } + } + return status; +} + +/** + * @brief Polling for transfer complete. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CompleteLevel Specifies the DMA level complete. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) +{ + uint32_t temp; + uint32_t tickstart; + + if (HAL_DMA_STATE_BUSY != hdma->State) + { + /* no transfer ongoing */ + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + /* Polling mode not supported in circular mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != 0U) + { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + /* Get the level transfer complete flag */ + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Transfer Complete flag */ + temp = DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x3cU); + } + else + { + /* Half Transfer Complete flag */ + temp = DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x3cU); + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + while ((hdma->DmaBaseAddress->ISR & temp) == 0U) + { + if ((0U != (hdma->DmaBaseAddress->ISR & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x3cU))))) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x3cU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_ERROR; + } + } + } + + if (HAL_DMA_FULL_TRANSFER == CompleteLevel) + { + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x3cU)); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + { + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x3cU)); + } + + /* Process unlocked */ + __HAL_UNLOCK(hdma); + + return HAL_OK; +} + +/** + * @brief Handle DMA interrupt request. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval None + */ +void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) +{ + uint32_t flag_it = hdma->DmaBaseAddress->ISR; + uint32_t source_it = hdma->Instance->CCR; + + /* Half Transfer Complete Interrupt management ******************************/ + if (((flag_it & (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x3cU))) != 0U) && ((source_it & DMA_IT_HT) != 0U)) + { + /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the half transfer interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); + } + /* Clear the half transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x3cU)); + + /* DMA peripheral state is not updated in Half Transfer */ + /* but in Transfer Complete case */ + + if (hdma->XferHalfCpltCallback != NULL) + { + /* Half transfer callback */ + hdma->XferHalfCpltCallback(hdma); + } + } + + /* Transfer Complete Interrupt management ***********************************/ + else if ((0U != (flag_it & (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x3cU)))) && (0U != (source_it & DMA_IT_TC))) + { + if ((hdma->Instance->CCR & DMA_CCR_CIRC) == 0U) + { + /* Disable the transfer complete and error interrupt */ + __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE | DMA_IT_TC); + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + } + /* Clear the transfer complete flag */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_TCIF1 << (hdma->ChannelIndex & 0x3cU)); + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferCpltCallback != NULL) + { + /* Transfer complete callback */ + hdma->XferCpltCallback(hdma); + } + } + + /* Transfer Error Interrupt management **************************************/ + else if (((flag_it & (DMA_FLAG_TE1 << (hdma->ChannelIndex & 0x3cU)))!= 0U) && ((source_it & DMA_IT_TE) != 0U)) + { + /* When a DMA transfer error occurs */ + /* A hardware clear of its EN bits is performed */ + /* Disable ALL DMA IT */ + __HAL_DMA_DISABLE_IT(hdma, (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)); + + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x3cU)); + + /* Update error code */ + hdma->ErrorCode = HAL_DMA_ERROR_TE; + + /* Change the DMA state */ + hdma->State = HAL_DMA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hdma); + + if (hdma->XferErrorCallback != NULL) + { + /* Transfer error callback */ + hdma->XferErrorCallback(hdma); + } + } + else + { + /* Nothing To Do */ + } + return; +} + +/** + * @brief Register callbacks + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @param pCallback Pointer to private callback function which has pointer to + * a DMA_HandleTypeDef structure as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_RegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID, void (* pCallback)(DMA_HandleTypeDef *_hdma)) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = pCallback; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = pCallback; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = pCallback; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @brief UnRegister callbacks + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param CallbackID User Callback identifier + * a HAL_DMA_CallbackIDTypeDef ENUM as parameter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DMA_UnRegisterCallback(DMA_HandleTypeDef *hdma, HAL_DMA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hdma); + + if (HAL_DMA_STATE_READY == hdma->State) + { + switch (CallbackID) + { + case HAL_DMA_XFER_CPLT_CB_ID: + hdma->XferCpltCallback = NULL; + break; + + case HAL_DMA_XFER_HALFCPLT_CB_ID: + hdma->XferHalfCpltCallback = NULL; + break; + + case HAL_DMA_XFER_ERROR_CB_ID: + hdma->XferErrorCallback = NULL; + break; + + case HAL_DMA_XFER_ABORT_CB_ID: + hdma->XferAbortCallback = NULL; + break; + + case HAL_DMA_XFER_ALL_CB_ID: + hdma->XferCpltCallback = NULL; + hdma->XferHalfCpltCallback = NULL; + hdma->XferErrorCallback = NULL; + hdma->XferAbortCallback = NULL; + break; + + default: + status = HAL_ERROR; + break; + } + } + else + { + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hdma); + + return status; +} + +/** + * @} + */ + + + +/** @defgroup DMA_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Check the DMA state + (+) Get error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the DMA handle state. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval HAL state + */ +HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) +{ + /* Return DMA handle state */ + return hdma->State; +} + +/** + * @brief Return the DMA error code. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @retval DMA Error Code + */ +uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) +{ + return hdma->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup DMA_Private_Functions + * @{ + */ + +/** + * @brief Sets the DMA Transfer parameter. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA Channel. + * @param SrcAddress The source memory Buffer address + * @param DstAddress The destination memory Buffer address + * @param DataLength The length of data to be transferred from source to destination + * @retval HAL status + */ +static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) +{ + /* Clear all flags */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x3cU)); + + /* Configure DMA Channel data length */ + hdma->Instance->CNDTR = DataLength; + + /* Memory to Peripheral */ + if ((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) + { + /* Configure DMA Channel destination address */ + hdma->Instance->CPAR = DstAddress; + + /* Configure DMA Channel source address */ + hdma->Instance->CMAR = SrcAddress; + } + /* Peripheral to Memory */ + else + { + /* Configure DMA Channel source address */ + hdma->Instance->CPAR = SrcAddress; + + /* Configure DMA Channel destination address */ + hdma->Instance->CMAR = DstAddress; + } +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_flash.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_flash.c new file mode 100644 index 0000000000..d2060df3e4 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_flash.c @@ -0,0 +1,537 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_flash.c + * @author MCD Application Team + * @brief FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the internal FLASH memory: + * + Program operations functions + * + Memory Control functions + * + Peripheral Errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### FLASH peripheral features ##### + ============================================================================== + + [..] The Flash memory interface implements the erase and program Flash memory operations + and write protection mechanisms. + + [..] The FLASH main features are: + (+) Flash memory read operations + (+) Flash memory program/erase operations + (+) Read / write protections + + ##### How to use this driver ##### + ============================================================================== + [..] + This driver provides functions and macros to configure and program the FLASH + memory. + + (#) Flash Memory IO Programming functions: + (++) Program functions: word and burst program + (++) There are two modes of programming: + (+++) Polling mode using HAL_FLASH_Program() function + (+++) Interrupt mode using HAL_FLASH_Program_IT() function + (+++) Polling mode using HAL_FLASH_BurstProgram() function + (+++) Interrupt mode using HAL_FLASH_BurstProgram_IT() function + + (#) Interrupts and flags management functions: + (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler() + (++) Callback functions are called when the flash operations are finished : + HAL_FLASH_EndOfOperationCallback() when everything is ok, otherwise + HAL_FLASH_OperationErrorCallback() + (++) Get error flag status by calling HAL_GetError() + + [..] + In addition to these functions, this driver includes a set of macros allowing + to handle the following operations: + (+) Set the wait state latency + (+) Enable/Disable the Flash interrupts + (+) Monitor the Flash flags status + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup FLASH FLASH + * @brief FLASH HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup FLASH_Private_Variables FLASH Private Variables + * @{ + */ +/** + * @brief Variable used for Program/Erase sectors under interruption + */ +FLASH_ProcessTypeDef pFlash = {.Lock = HAL_UNLOCKED, \ + .ErrorCode = HAL_OK, \ + .ProcedureOnGoing = 0U, \ + .Address = 0U, \ + .Page = 0U, \ + .NbPagesToErase = 0U + }; +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASH_Private_Functions FLASH Private Functions + * @{ + */ +static void FLASH_Program_Word(uint32_t Address, uint32_t Data); +static void FLASH_Program_Burst(uint32_t Address, uint32_t DataAddress); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup FLASH_Exported_Functions FLASH Exported Functions + * @{ + */ + +/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions + * @brief Programming operation functions + * +@verbatim + =============================================================================== + ##### Programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the FLASH + program operations. + +@endverbatim + * @{ + */ + +/** + * @brief Program a data at a specified address. + * @param TypeProgram Indicate the way to program at a specified address + * This parameter can be a value of @ref FLASH_TYPE_PROGRAM + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed + * This parameter is the data for the word program and the address where + * are stored the data for the burst program. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint32_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_ADDR_ALIGNED_32BITS(Address)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Verify that next operation can be proceed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status == HAL_OK) + { + if (TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program a word (32-bit) at a specified address */ + FLASH_Program_Word(Address, Data); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program 4 word starting from a specified address */ + FLASH_Program_Burst(Address, Data); + } + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Program a word or burst program of a row at a specified address with interrupt enabled. + * @param TypeProgram Indicate the way to program at a specified address. + * This parameter can be a value of @ref FLASH_TYPE_PROGRAM + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed + * This parameter is the data for the double word program and the address where + * are stored the data for the row fast program. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint32_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); + assert_param(IS_ADDR_ALIGNED_32BITS(Address)); + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Verify that next operation can be proceed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } + else + { + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = FLASH_CMD_WRITE; + pFlash.Address = Address; + + /* Clear All IT pending flag */ + __HAL_FLASH_CLEAR_IT(FLASH_IT_CMDDONE | FLASH_IT_CMDSTART | FLASH_IT_CMDERR | FLASH_IT_ILLCMD); + + /* Enable End of Operation and Error interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_CMDDONE | FLASH_IT_CMDERR | FLASH_IT_ILLCMD); + + if (TypeProgram == FLASH_TYPEPROGRAM_WORD) + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + + /* Program a word (32-bit) at a specified address */ + FLASH_Program_Word(Address, Data); + } + else + { + /* Check the parameters */ + assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); + /* Program 4 word starting from a specified address */ + FLASH_Program_Burst(Address, Data); + } + } + + /* return status */ + return status; +} + +/** + * @brief Handle FLASH interrupt request. + * @retval None + */ +void HAL_FLASH_IRQHandler(void) +{ + uint32_t param; + uint32_t error; + + /* Save flash errors. */ + error = FLASH->IRQSTAT & FLASH_FLAG_ALL_ERRORS; + + /* A] Set parameter for user or error callbacks */ + + /* Check if the operation was a program or erase */ + if ((pFlash.ProcedureOnGoing == FLASH_CMD_WRITE) || \ + (pFlash.ProcedureOnGoing == FLASH_CMD_BURSTWRITE) || \ + (pFlash.ProcedureOnGoing == FLASH_CMD_OTPWRITE)) + { + /* Return address being programmed */ + param = pFlash.Address; + } + else if ((pFlash.ProcedureOnGoing == FLASH_CMD_MASSERASE) || \ + (pFlash.ProcedureOnGoing == FLASH_CMD_ERASE_PAGES)) + { + /* return page number being erased (0 for mass erase) */ + param = pFlash.Page; + } + else + { + param = 0U; + } + + /* B] Check errors */ + if (error != 0x00u) + { + /* Save the error code */ + pFlash.ErrorCode |= error; + + /* Clear error flags */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS); + + /* Stop the procedure ongoing */ + pFlash.ProcedureOnGoing = 0; + + /* Error callback */ + HAL_FLASH_OperationErrorCallback(param); + } + + /* C] Check FLASH End of Operation flag */ + if (__HAL_FLASH_GET_IT(FLASH_IT_CMDDONE)) + { + + /* Clear FLASH End of Operation IT flag pending bit */ + __HAL_FLASH_CLEAR_IT(FLASH_IT_CMDDONE); + + /* Clear FLASH End of Operation pending bit */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_CMDDONE); + + + if (pFlash.ProcedureOnGoing == FLASH_CMD_ERASE_PAGES) + { + /* Nb of pages to erased can be decreased */ + pFlash.NbPagesToErase--; + + /* Check if there are still pages to erase */ + if (pFlash.NbPagesToErase != 0x00u) + { + /* Increment page number */ + pFlash.Page++; + FLASH_PageErase(pFlash.Page); + } + else + { + pFlash.Page = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = 0; + } + } + else + { + /*Stop the ongoing procedure */ + pFlash.Page = 0xFFFFFFFFU; + pFlash.ProcedureOnGoing = 0; + } + + /* User callback */ + HAL_FLASH_EndOfOperationCallback(param); + } + + if (pFlash.ProcedureOnGoing == 0) + { + /* Disable End of Operation and Error interrupts */ + __HAL_FLASH_DISABLE_IT(FLASH_IT_CMDDONE | FLASH_IT_CMDERR | FLASH_IT_ILLCMD); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + } +} + +/** + * @brief FLASH end of operation interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: 0 + * Page Erase: Page which has been erased + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_EndOfOperationCallback could be implemented in the user file + */ +} + +/** + * @brief FLASH operation error interrupt callback. + * @param ReturnValue The value saved in this parameter depends on the ongoing procedure + * Mass Erase: 0 + * Page Erase: Page number which returned an error + * Program: Address which was selected for data program + * @retval None + */ +__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(ReturnValue); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_FLASH_OperationErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Errors functions + * @brief Peripheral Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time Errors of the FLASH peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Get the specific FLASH error flag. + * @retval FLASH_ErrorCode The returned value can be + * @arg @ref HAL_FLASH_ERROR_NONE No error set + * @arg @ref HAL_FLASH_ERROR_OP FLASH Operation error + * @arg @ref HAL_FLASH_ERROR_ILLCMD FLASH Illegal command + */ +uint32_t HAL_FLASH_GetError(void) +{ + return pFlash.ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** @addtogroup FLASH_Private_Functions + * @{ + */ + +/** + * @brief Wait for a FLASH operation to complete. + * @param Timeout Maximum flash operation timeout + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Wait for the FLASH operation to complete by polling on CMDDONE flag to be set. + If the FLASH operation fails, an error flag will be set */ + while (__HAL_FLASH_GET_FLAG(FLASH_FLAG_CMDDONE) != SET) + { + if (Timeout != HAL_MAX_DELAY) + { + if ((HAL_GetTick() - tickstart) >= Timeout) + { + return HAL_TIMEOUT; + } + } + } + + /* Check flash errors */ + if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_ALL_ERRORS)) + { + /* Save the error code */ + pFlash.ErrorCode |= FLASH->IRQSTAT; + + /* Clear error flags */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS); + + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Program a word (32-bit) at a specified address. + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_Word(uint32_t Address, uint32_t Data) +{ + /* Clear All Flags */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_CMDDONE | FLASH_FLAG_CMDSTART | FLASH_FLAG_CMDERR | FLASH_FLAG_ILLCMD); + + /* Load the word address */ + + FLASH->ADDRESS = (((Address - FLASH_START_ADDR) >> 2) & FLASH_SIZE_MASK); + + /* Load the data to program */ + FLASH->DATA0 = Data; + + /* Load the WRITE command */ + FLASH->COMMAND = FLASH_CMD_WRITE; +} + +/** + * @brief Program 4 words starting from the specified address. + * @param Address Specifies the address to be programmed. + * @param DataAddress Specifies the address where the data are stored. + * @retval None + */ +static void FLASH_Program_Burst(uint32_t Address, uint32_t DataAddress) +{ + uint32_t *src_addr = (uint32_t *)DataAddress; + + /* Clear All Flags */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_CMDDONE | FLASH_FLAG_CMDSTART | FLASH_FLAG_CMDERR | FLASH_FLAG_ILLCMD); + + /* Load the word address */ + FLASH->ADDRESS = (((Address - FLASH_START_ADDR) >> 2) & FLASH_SIZE_MASK); + FLASH->DATA0 = *src_addr; + src_addr = src_addr + 1; + FLASH->DATA1 = *src_addr; + src_addr = src_addr + 1; + FLASH->DATA2 = *src_addr; + src_addr = src_addr + 1; + FLASH->DATA3 = *src_addr; + + /* Load the BURST WRITE command */ + FLASH->COMMAND = FLASH_CMD_BURSTWRITE; +} + + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_flash_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_flash_ex.c new file mode 100644 index 0000000000..d1b9f3dd01 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_flash_ex.c @@ -0,0 +1,422 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_flash.c + * @author MCD Application Team + * @brief Extended FLASH HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the FLASH extended peripheral: + * + Extended programming operations functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### Flash Extended features ##### + ============================================================================== + + [..] The FLASH interface contains the following additional features + + (+) Single bank memory organization + (+) Readout protection + (+) Write protection + + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to configure and program the FLASH memory. + It includes + (#) Flash Memory Erase functions: + (++) Erase function: Erase page, erase all sectors + (++) There are two modes of erase : + (+++) Polling Mode using HAL_FLASHEx_Erase() + (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT() + (#) OTP Memory Programming functions: + (++) There are two modes of OTP program : + (+++) Polling Mode using HAL_FLASHEx_OTPWRite() + (+++) Interrupt Mode using HAL_FLASHEx_OTPWrite_IT() + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_system.h" +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup FLASHEx FLASHEx + * @brief FLASH Extended HAL module driver + * @{ + */ + +#ifdef HAL_FLASH_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions + * @{ + */ +static void FLASH_MassErase(void); +static void FLASH_Program_OTPWord(uint32_t Address, uint32_t Data); +/** + * @} + */ + +/* Exported functions -------------------------------------------------------*/ +/** @defgroup FLASHEx_Exported_Functions FLASH Extended Exported Functions + * @{ + */ + +/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions + * @brief Extended IO operation functions + * +@verbatim + =============================================================================== + ##### Extended programming operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the Extended FLASH + programming operations Operations. + +@endverbatim + * @{ + */ +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages. + * @param[in] pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * @param[out] PageError Pointer to variable that contains the configuration + * information on faulty page in case of error (0xFFFFFFFF means that all + * the pages have been correctly erased) + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) +{ + HAL_StatusTypeDef status = HAL_ERROR; + uint32_t index; + + /* Check the parameters */ + assert_param(IS_FLASH_TYPE_ERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; + + /* Verify that next operation can be proceed */ + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Mass erase to be done */ + FLASH_MassErase(); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + } + else + { + /*Initialization of PageError variable*/ + *PageError = 0xFFFFFFFFU; + + for (index = pEraseInit->Page; index < (pEraseInit->Page + pEraseInit->NbPages); index++) + { + /* Start erase page */ + FLASH_PageErase(index); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + if (status != HAL_OK) + { + /* In case of error, stop erase procedure and return the faulty address */ + *PageError = index; + break; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + return status; +} + + +/** + * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled. + * @param pEraseInit Pointer to an @ref FLASH_EraseInitTypeDef structure that + * contains the configuration information for the erasing. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) +{ + /* Check the parameters */ + assert_param(IS_FLASH_TYPE_ERASE(pEraseInit->TypeErase)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_OK; + + /* save procedure for interrupt treatment */ + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + pFlash.ProcedureOnGoing = FLASH_CMD_MASSERASE; + } + else + { + pFlash.ProcedureOnGoing = FLASH_CMD_ERASE_PAGES; + } + + /* Clear All IT pending flag */ + __HAL_FLASH_CLEAR_IT(FLASH_IT_CMDDONE | FLASH_IT_CMDSTART | FLASH_IT_CMDERR | FLASH_IT_ILLCMD); + + /* Enable End of Operation and Error interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_CMDDONE | FLASH_IT_CMDERR | FLASH_IT_ILLCMD); + + if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) + { + /* Set Page to 0 for Interrupt callback management */ + pFlash.Page = 0; + + /* Proceed to Mass Erase */ + FLASH_MassErase(); + } + else + { + /* Erase by page to be done */ + pFlash.NbPagesToErase = pEraseInit->NbPages; + pFlash.Page = pEraseInit->Page; + + /*Erase 1st page and wait for IT */ + FLASH_PageErase(pEraseInit->Page); + } + + /* return status */ + return HAL_OK; +} + +/** + * @brief Program a word at a specified OTP address. + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed. + * + * @retval HAL_StatusTypeDef HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OTPWrite(uint32_t Address, uint32_t Data) +{ + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_ADDR_ALIGNED_32BITS(Address)); + assert_param(IS_FLASH_PROGRAM_OTP_ADDRESS(Address)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_OK; + + /* Program a word (32-bit) at a specified OTP address */ + FLASH_Program_OTPWord(Address, Data); + + /* Wait for last operation to be completed */ + status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE); + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return status; +} + +/** + * @brief Program a word at a specified OTP address with interrupt enabled. + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed. + * + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_OTPWrite_IT(uint32_t Address, uint32_t Data) +{ + /* Check the parameters */ + assert_param(IS_ADDR_ALIGNED_32BITS(Address)); + assert_param(IS_FLASH_PROGRAM_OTP_ADDRESS(Address)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + /* Reset error code */ + pFlash.ErrorCode = HAL_OK; + + /* Set internal variables used by the IRQ handler */ + pFlash.ProcedureOnGoing = FLASH_CMD_OTPWRITE; + pFlash.Address = Address; + + /* Clear All IT pending flag */ + __HAL_FLASH_CLEAR_IT(FLASH_IT_CMDDONE | FLASH_IT_CMDSTART | FLASH_IT_CMDERR | FLASH_IT_ILLCMD); + + /* Enable End of Operation and Error interrupts */ + __HAL_FLASH_ENABLE_IT(FLASH_IT_CMDDONE | FLASH_IT_CMDERR | FLASH_IT_ILLCMD); + + /* Program a word (32-bit) at a specified address */ + FLASH_Program_OTPWord(Address, Data); + + /* return status */ + return HAL_OK; +} + +/** + * @brief Page Protection function. It allows protecting from write + * by group of 8 pages. + * @param pageProtectionStruct Bitfield with the write/page erase protection for group of 8 pages. + * (group 0: Flash pages 0 to 7, group 1: Flash pages 8 to 15 ...) + * @ref FLASH_PageProtectionTypeDef. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_FLASHEx_PageProtection(FLASH_PageProtectionTypeDef *pageProtectionStruct) +{ + /* Check Null pointer */ + if (pageProtectionStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(pageProtectionStruct->state)); + + /* Process Locked */ + __HAL_LOCK(&pFlash); + + if (pageProtectionStruct->state == ENABLE) + { + FLASH->PAGEPROT0 |= pageProtectionStruct->pageProt_0; + if (pageProtectionStruct->pageProt_1 != 0) + { + FLASH->PAGEPROT1 |= pageProtectionStruct->pageProt_1; + } + + } + else + { + FLASH->PAGEPROT0 &= ~pageProtectionStruct->pageProt_0; + if (pageProtectionStruct->pageProt_1 != 0) + { + FLASH->PAGEPROT1 &= ~pageProtectionStruct->pageProt_1; + } + + } + + /* Process Unlocked */ + __HAL_UNLOCK(&pFlash); + + /* return status */ + return HAL_OK; + +} + +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @addtogroup FLASHEx_Private_Functions + * @{ + */ + +/** + * @brief Mass erase of FLASH memory. + * @retval None + */ +static void FLASH_MassErase(void) +{ + /* Clear All Flags */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_CMDDONE | FLASH_FLAG_CMDSTART | FLASH_FLAG_CMDERR | FLASH_FLAG_ILLCMD); + + /* MASSERASE command */ + FLASH->COMMAND = FLASH_CMD_MASSERASE; +} + +/** + * @brief Erase the specified FLASH memory page. + * @param Page FLASH page to erase + * This parameter must be a value between 0 and (max number of pages in Flash - 1) + * @retval None + */ +void FLASH_PageErase(uint32_t Page) +{ + /* Check the parameters */ + assert_param(IS_FLASH_PAGE(Page)); + + /* Clear All Flags */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_CMDDONE | FLASH_FLAG_CMDSTART | FLASH_FLAG_CMDERR | FLASH_FLAG_ILLCMD); + + FLASH->ADDRESS = (((Page * FLASH_PAGE_SIZE) >> 2) & FLASH_SIZE_MASK); + + /* Write the ERASE command */ + FLASH->COMMAND = FLASH_CMD_ERASE_PAGES; +} + +/** + * @brief Program a word (32-bit) at a specified OTP address. + * @param Address Specifies the address to be programmed. + * @param Data Specifies the data to be programmed. + * @retval None + */ +static void FLASH_Program_OTPWord(uint32_t Address, uint32_t Data) +{ + uint32_t otp_address; + uint32_t addr_offset; + + /* Clear All Flags */ + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_CMDDONE | FLASH_FLAG_CMDSTART | FLASH_FLAG_CMDERR | FLASH_FLAG_ILLCMD); + + addr_offset = Address - OTP_AREA_BASE; + otp_address = (((addr_offset & 0x300) >> 2) | ((addr_offset & 0xFF) >> 2)); + /* Load the word address */ + FLASH->ADDRESS = otp_address; + + /* Load the data to program */ + FLASH->DATA0 = Data; + + /* Load the OTP WRITE command */ + FLASH->COMMAND = FLASH_CMD_OTPWRITE; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FLASH_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_gpio.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_gpio.c new file mode 100644 index 0000000000..be1f56f211 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_gpio.c @@ -0,0 +1,621 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_gpio.c + * @author MCD Application Team + * @brief GPIO HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the General Purpose Input/Output (GPIO) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### GPIO Peripheral features ##### + ============================================================================== + [..] + (+) Each port bit of the general-purpose I/O (GPIO) ports can be individually + configured by software in several modes: + (++) Input mode + (++) Output mode + (++) Alternate function mode + (++) External interrupt/event lines + + (+) Open-drain and analog features are not available on all IO ports, refer to + reference manual for available pins. + + (+) During and just after reset, the alternate functions and external interrupt + lines are not active and the I/O ports are configured in input pull-up mode. + + (+) All GPIO pins have weak internal pull-up and pull-down resistors, which can be + activated or not. + + (+) In Output or Alternate mode, each IO can be configured on push-pull type and the + IO speed can be selected depending on the VDD value. + + (+) The microcontroller IO pins are connected to onboard peripherals/modules through a + multiplexer that allows only one peripheral alternate function (AF) connected + to an IO pin at a time. In this way, there can be no conflict between peripherals + sharing the same IO pin. + + (+) All ports have external interrupt capability. To use external interrupt + lines, the port must be configured in input mode. All available GPIO pins are + connected to the 16 external interrupt lines. + + (+) The external interrupt controller consists of 16 lines are connected to GPIO + for generating interrupt requests. Each input line can be independently configured + to select the interrupt and the corresponding trigger event + (rising or falling or both or low level or high level). Each line can + also be masked independently. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). + + (#) Modify the control of the product's pull-up/-down of the IO ports from PWR registers (which is + the default state) using either LL_PWR_EnableGPIOPullUp or LL_PWR_EnableGPIOPullDown APIs depending + on the requested pull mode. This will allow to switch the control to the GPIO register. + + (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). + (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure + (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef + structure. + (++) In case of Output or alternate function mode selection: the speed is + configured through "Speed" member from GPIO_InitTypeDef structure. + (++) In alternate mode is selection, the alternate function connected to the IO + is configured through "Alternate" member from GPIO_InitTypeDef structure. + (++) Analog mode is required when a pin is to be used as ADC channel. + (++) In case of external interrupt selection the "Mode" member from + GPIO_InitTypeDef structure select the type interrupt and + the corresponding trigger event (rising or falling or both or low level or high level). + + (#) In case of external interrupt mode selection, configure NVIC IRQ priority + mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using + HAL_NVIC_EnableIRQ(). + + (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). + + (#) To set/reset the level of a pin configured in output mode use + HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). + + (#) To set the level of several pins and reset level of several other pins in + same cycle, use HAL_GPIO_WriteMultipleStatePin(). + + (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). + + (#) During and just after reset, the alternate functions are not + active and the GPIO pins are configured in input pull-up mode (except JTAG + pins). + + (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose + (PB12 and PB13, respectively) when the LSE oscillator is off. The LSE has + priority over the GPIO function. + + (#) The HSE oscillator pins OSC_IN/OSC_OUT are dedicated oscillator IOs and can + not be used as general purpose. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of + * range of the shift operator in following API : + * HAL_GPIO_Init + * HAL_GPIO_DeInit + */ + +#ifdef HAL_GPIO_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines ------------------------------------------------------------*/ +/** @addtogroup GPIO_Private_Constants GPIO Private Constants + * @{ + */ +#define GPIO_NUMBER (16u) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup GPIO_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_Exported_Functions_Group1 + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the GPIOx peripheral according to the specified parameters in the GPIO_Init. + * @param GPIOx where x can be (A..B) to select the GPIO peripheral for STM32WL3x family + * @param GPIO_Init pointer to a GPIO_InitTypeDef structure that contains + * the configuration information for the specified GPIO peripheral. + * @retval None + */ +void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t temp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); + assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); + assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); + + /* Configure the port pins */ + while (((GPIO_Init->Pin) >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Init->Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*--------------------- GPIO Mode Configuration ------------------------*/ + /* In case of Output or Alternate function mode selection */ + if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)) + { + /* Check the Speed parameter */ + assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); + /* Configure the IO Speed */ + temp = GPIOx->OSPEEDR; + temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + temp |= (GPIO_Init->Speed << (position * 2u)); + GPIOx->OSPEEDR = temp; + + /* Configure the IO Output Type */ + temp = GPIOx->OTYPER; + temp &= ~(GPIO_OTYPER_OT0 << position) ; + temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position); + GPIOx->OTYPER = temp; + } + + /* Activate the Pull-up or Pull down resistor for the current IO */ + if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG) + { + temp = GPIOx->PUPDR; + temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2U)); + temp |= ((GPIO_Init->Pull) << (position * 2U)); + GPIOx->PUPDR = temp; + } + + /* In case of Alternate function mode selection */ + if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF) + { + /* Check the Alternate function parameters */ + assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); + assert_param(IS_GPIO_AF(GPIO_Init->Alternate)); + + /* Configure Alternate function mapped with the current IO */ + temp = GPIOx->AFR[position >> 3u]; + temp &= ~(0xFu << ((position & 0x07u) * 4u)); + temp |= ((GPIO_Init->Alternate) << ((position & 0x07u) * 4u)); + GPIOx->AFR[position >> 3u] = temp; + } + + /* Configure IO Direction mode (Input, Output, Alternate or Analog) */ + temp = GPIOx->MODER; + temp &= ~(GPIO_MODER_MODE0 << (position * 2u)); + temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2u)); + GPIOx->MODER = temp; + + /*--------------------- EXTI Mode Configuration ------------------------*/ + /* Configure the External Interrupt or event for the current IO */ + if ((GPIO_Init->Mode & EXTI_MODE) != 0x00u) + { + + /* Edge/Level line configuration */ + if ((GPIO_Init->Mode & DETECTION_TYPE) != 0x00u) + { + temp = SYSCFG->IO_DTR; + if (GPIOx == GPIOA) + { + temp &= ~(1 << position); + temp |= (1 << position); + } + else + { + temp &= ~((1 << position) << 16); + temp |= ((1 << position) << 16); + } + SYSCFG->IO_DTR = temp; + } + + /* Edge selection configuration */ + if ((GPIO_Init->Mode & EDGE_SELECTION) != 0x00u) + { + temp = SYSCFG->IO_IBER; + + if (GPIOx == GPIOA) + { + temp &= ~(1 << position); + temp |= (1 << position); + } + else + { + temp &= ~((1 << position) << 16); + temp |= ((1 << position) << 16); + } + SYSCFG->IO_IBER= temp; + } + + /* Trigger mode configuration */ + if ((GPIO_Init->Mode & TRIGGER_MODE) != 0x00u) + { + temp = SYSCFG->IO_IEVR; + + if (GPIOx == GPIOA) + { + temp &= ~(1 << position); + temp |= (1 << position); + } + else + { + temp &= ~((1 << position) << 16); + temp |= ((1 << position) << 16); + } + SYSCFG->IO_IEVR= temp; + } + + /* Enable the specified EXTI interrupt line */ + if ((GPIO_Init->Mode & EXTI_IT) == EXTI_IT) + { + temp = SYSCFG->IO_IER; + + if (GPIOx == GPIOA) + { + temp &= ~(1 << position); + temp |= (1 << position); + } + else + { + temp &= ~((1 << position) << 16); + temp |= ((1 << position) << 16); + } + SYSCFG->IO_IER= temp; + } + } + } + + position++; + } +} + +/** + * @brief De-initialize the GPIOx peripheral registers to their default reset values. + * @param GPIOx where x can be (A..B) to select the GPIO peripheral for STM32WL3x family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @retval None + */ +void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) +{ + uint32_t position = 0x00u; + uint32_t iocurrent; + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Configure the port pins */ + while ((GPIO_Pin >> position) != 0x00u) + { + /* Get current io position */ + iocurrent = (GPIO_Pin) & (1uL << position); + + if (iocurrent != 0x00u) + { + /*------------------------- EXTI Mode Configuration --------------------*/ + /* Clear the External Interrupt or Event for the current IO */ + + /* Disable the specified EXTI interrupt line */ + tmp = SYSCFG->IO_IER; + if(GPIOx == GPIOA) + { + tmp &= ~(1<IO_IER = tmp; + + /* Clear EXTI line configuration */ + tmp = SYSCFG->IO_DTR; + if(GPIOx == GPIOA) + { + tmp &= ~(1<IO_DTR = tmp; + + tmp = SYSCFG->IO_IBER; + if(GPIOx == GPIOA) + { + tmp &= ~(1<IO_IBER = tmp; + + /* Clear trigger mode configuration */ + tmp = SYSCFG->IO_IEVR; + if(GPIOx == GPIOA) + { + tmp &= ~(1<IO_IEVR = tmp; + + /*------------------------- GPIO Mode Configuration --------------------*/ + /* Configure IO in Analog Mode */ + GPIOx->MODER |= (GPIO_MODER_MODE0 << (position * 2u)); + + /* Configure the default Alternate Function in current IO */ + GPIOx->AFR[position >> 3u] &= ~(0xFu << ((position & 0x07u) * 4u)) ; + + /* Deactivate the Pull-up and Pull-down resistor for the current IO */ + GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPD0 << (position * 2u)); + + /* Configure the default value IO Output Type */ + GPIOx->OTYPER &= ~(GPIO_OTYPER_OT0 << position) ; + + /* Configure the default value for IO Speed */ + GPIOx->OSPEEDR &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u)); + } + + position++; + } +} + +/** + * @} + */ + +/** @addtogroup GPIO_Exported_Functions_Group2 + * @brief GPIO Read, Write, Toggle, Lock and EXTI management functions. + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + +@endverbatim + * @{ + */ + +/** + * @brief Read the specified input port pin. + * @param GPIOx where x can be (A..B) to select the GPIO peripheral for STM32WL3x family + * @param GPIO_Pin specifies the port bit to read. + * This parameter can be GPIO_PIN_x where x can be (0..15). + * @retval The input port pin value. + */ +GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + GPIO_PinState bitstatus; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + if ((GPIOx->IDR & GPIO_Pin) != 0x00u) + { + bitstatus = GPIO_PIN_SET; + } + else + { + bitstatus = GPIO_PIN_RESET; + } + return bitstatus; +} + +/** + * @brief Set or clear the selected data port bit. + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. In this way, there is no risk of an IRQ occurring between + * the read and the modify access. + * @param GPIOx where x can be (A..B) to select the GPIO peripheral for STM32WL3x family + * @param GPIO_Pin specifies the port bit to be written. + * This parameter can be one of GPIO_PIN_x where x can be (0..15). + * @param PinState specifies the value to be written to the selected bit. + * This parameter can be one of the GPIO_PinState enum values: + * @arg GPIO_PIN_RESET: to clear the port pin + * @arg GPIO_PIN_SET: to set the port pin + * @retval None + */ +void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) +{ + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + assert_param(IS_GPIO_PIN_ACTION(PinState)); + + if (PinState != GPIO_PIN_RESET) + { + GPIOx->BSRR = (uint32_t)GPIO_Pin; + } + else + { + GPIOx->BRR = (uint32_t)GPIO_Pin; + } +} + +/** + * @brief Set and clear several pins of a dedicated port in same cycle. + * @note This function uses GPIOx_BSRR and GPIOx_BRR registers to allow atomic read/modify + * accesses. + * @param GPIOx where x can be (A..F) to select the GPIO peripheral for STM32WLxx family + * @param PinReset specifies the port bits to be reset + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15) or zero. + * @param PinSet specifies the port bits to be set + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15) or zero. + * @note Both PinReset and PinSet combinations shall not get any common bit, else + * assert would be triggered. + * @note At least one of the two parameters used to set or reset shall be different from zero. + * @retval None + */ +void HAL_GPIO_WriteMultipleStatePin(GPIO_TypeDef *GPIOx, uint16_t PinReset, uint16_t PinSet) +{ + uint32_t tmp; + + /* Check the parameters */ + /* Make sure at least one parameter is different from zero and that there is no common pin */ + assert_param(IS_GPIO_PIN((uint32_t)PinReset | (uint32_t)PinSet)); + assert_param(IS_GPIO_COMMON_PIN(PinReset, PinSet)); + + tmp = (((uint32_t)PinReset << 16) | PinSet); + GPIOx->BSRR = tmp; +} + +/** + * @brief Toggle the specified GPIO pin. + * @param GPIOx where x can be (A..B) to select the GPIO peripheral for STM32WB0x family + * @param GPIO_Pin specifies the pin to be toggled. + * @retval None + */ +void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + uint32_t odr; + + /* Check the parameters */ + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* get current Output Data Register value */ + odr = GPIOx->ODR; + + /* Set selected pins that were at low level, and reset ones that were high */ + GPIOx->BSRR = ((odr & GPIO_Pin) << GPIO_NUMBER) | (~odr & GPIO_Pin); +} + +/** + * @brief Lock GPIO Pins configuration registers. + * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR, + * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH. + * @note The configuration of the locked GPIO pins can no longer be modified + * until the next reset. + * @param GPIOx where x can be (A..B) to select the GPIO peripheral for STM32WL3x family + * @param GPIO_Pin specifies the port bits to be locked. + * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). + * @retval None + */ +HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin) +{ + __IO uint32_t tmp = GPIO_LCKR_LCKK; + + /* Check the parameters */ + assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); + assert_param(IS_GPIO_PIN(GPIO_Pin)); + + /* Apply lock key write sequence */ + tmp |= GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ + GPIOx->LCKR = GPIO_Pin; + /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ + GPIOx->LCKR = tmp; + /* Read LCKK register. This read is mandatory to complete key lock sequence */ + tmp = GPIOx->LCKR; + + /* read again in order to confirm lock is active */ + if ((GPIOx->LCKR & GPIO_LCKR_LCKK) != 0x00u) + { + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Handle EXTI interrupt request. + * @param GPIOx where x can be (A..B) to select the GPIO peripheral + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +void HAL_GPIO_EXTI_IRQHandler(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* EXTI line interrupt detected */ + if (__HAL_GPIO_EXTI_GET_IT(GPIOx, GPIO_Pin) != 0x00u) + { + __HAL_GPIO_EXTI_CLEAR_IT(GPIOx, GPIO_Pin); + HAL_GPIO_EXTI_Callback(GPIOx, GPIO_Pin); + } +} + +/** + * @brief EXTI line detection callback. + * @param GPIOx where x can be (A..B) to select the GPIO peripheral + * @param GPIO_Pin Specifies the port pin connected to corresponding EXTI line. + * @retval None + */ +__weak void HAL_GPIO_EXTI_Callback(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(GPIO_Pin); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_GPIO_EXTI_Callback could be implemented in the user file + */ +} + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_GPIO_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_i2c.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_i2c.c new file mode 100644 index 0000000000..8461fc6318 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_i2c.c @@ -0,0 +1,7561 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_i2c.c + * @author MCD Application Team + * @brief I2C HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Inter Integrated Circuit (I2C) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The I2C HAL driver can be used as follows: + + (#) Declare a I2C_HandleTypeDef handle structure, for example: + I2C_HandleTypeDef hi2c; + + (#)Initialize the I2C low level resources by implementing the HAL_I2C_MspInit() API: + (##) Enable the I2Cx interface clock + (##) I2C pins configuration + (+++) Enable the clock for the I2C GPIOs + (+++) Configure I2C pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the I2Cx interrupt priority + (+++) Enable the NVIC I2C IRQ Channel + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for + the transmit or receive channel + (+++) Enable the DMAx interface clock using + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx channel + (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on + the DMA Tx or Rx channel + + (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode, + Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure. + + (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware + (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API. + + (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady() + + (#) For I2C IO and IO MEM operations, three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit() + (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive() + (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit() + (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive() + + *** Polling mode IO MEM operation *** + ===================================== + [..] + (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write() + (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read() + + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode using HAL_I2C_Master_Receive_IT() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Transmit_IT() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode using HAL_I2C_Slave_Receive_IT() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master or memory I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + + *** Interrupt mode or DMA mode IO sequential operation *** + ========================================================== + [..] + (@) These interfaces allow to manage a sequential transfer with a repeated start condition + when a direction change during transfer + [..] + (+) A specific option field manage the different steps of a sequential transfer + (+) Option field values are defined through I2C_XFEROPTIONS and are listed below: + (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in + no sequential mode + (++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address + and data to transfer without a final stop condition + (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with + start condition, address and data to transfer without a final stop condition, + an then permit a call the same master sequential interface several times + (like HAL_I2C_Master_Seq_Transmit_IT() then HAL_I2C_Master_Seq_Transmit_IT() + or HAL_I2C_Master_Seq_Transmit_DMA() then HAL_I2C_Master_Seq_Transmit_DMA()) + (++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and without a final stop condition in both cases + (++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address + and with new data to transfer if the direction change or manage only the new data to + transfer + if no direction change and with a final stop condition in both cases + (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition + after several call of the same master sequential interface several times + (link with option I2C_FIRST_AND_NEXT_FRAME). + Usage can, transfer several bytes one by one using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME. + Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or + Receive sequence permit to call the opposite interface Receive or Transmit + without stopping the communication and so generate a restart condition. + (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after + each call of the same master sequential + interface. + Usage can, transfer several bytes one by one with a restart with slave address between + each bytes using + HAL_I2C_Master_Seq_Transmit_IT + or HAL_I2C_Master_Seq_Receive_IT + or HAL_I2C_Master_Seq_Transmit_DMA + or HAL_I2C_Master_Seq_Receive_DMA + with option I2C_FIRST_FRAME then I2C_OTHER_FRAME. + Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic + generation of STOP condition. + + (+) Different sequential I2C interfaces are listed below: + (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Transmit_IT() or using HAL_I2C_Master_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_MasterTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using + HAL_I2C_Master_Seq_Receive_IT() or using HAL_I2C_Master_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (++) Abort a master or memory IT or DMA I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+++) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (++) Enable/disable the Address listen mode in slave I2C mode using HAL_I2C_EnableListen_IT() + HAL_I2C_DisableListen_IT() + (+++) When address slave I2C match, HAL_I2C_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction request by master + (Write/Read). + (+++) At Listen mode end HAL_I2C_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_ListenCpltCallback() + (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Transmit_IT() or using HAL_I2C_Slave_Seq_Transmit_DMA() + (+++) At transmission end of current frame transfer, HAL_I2C_SlaveTxCpltCallback() is executed and + users can add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using + HAL_I2C_Slave_Seq_Receive_IT() or using HAL_I2C_Slave_Seq_Receive_DMA() + (+++) At reception end of current frame transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (++) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (++) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** Interrupt mode IO MEM operation *** + ======================================= + [..] + (+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using + HAL_I2C_Mem_Write_IT() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using + HAL_I2C_Mem_Read_IT() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Transmit in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterTxCpltCallback() + (+) Receive in master mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Master_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MasterRxCpltCallback() + (+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Transmit_DMA() + (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback() + (+) Receive in slave mode an amount of data in non-blocking mode (DMA) using + HAL_I2C_Slave_Receive_DMA() + (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + (+) Abort a master or memory I2C process communication with Interrupt using HAL_I2C_Master_Abort_IT() + (+) End of abort process, HAL_I2C_AbortCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_AbortCpltCallback() + (+) Discard a slave I2C process communication using __HAL_I2C_GENERATE_NACK() macro. + This action will inform Master to generate a Stop condition to discard the communication. + + *** DMA mode IO MEM operation *** + ================================= + [..] + (+) Write an amount of data in non-blocking mode with DMA to a specific memory address using + HAL_I2C_Mem_Write_DMA() + (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemTxCpltCallback() + (+) Read an amount of data in non-blocking mode with DMA from a specific memory address using + HAL_I2C_Mem_Read_DMA() + (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_I2C_MemRxCpltCallback() + (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_I2C_ErrorCallback() + + + *** I2C HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in I2C HAL driver. + + (+) __HAL_I2C_ENABLE: Enable the I2C peripheral + (+) __HAL_I2C_DISABLE: Disable the I2C peripheral + (+) __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode + (+) __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not + (+) __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag + (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt + (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2C_RegisterCallback() or HAL_I2C_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_I2C_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_I2C_RegisterAddrCallback(). + [..] + Use function HAL_I2C_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) MemTxCpltCallback : callback for Memory transmission end of transfer. + (+) MemRxCpltCallback : callback for Memory reception end of transfer. + (+) ErrorCallback : callback for error detection. + (+) AbortCpltCallback : callback for abort completion process. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_I2C_UnRegisterAddrCallback(). + [..] + By default, after the HAL_I2C_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2C_MasterTxCpltCallback(), HAL_I2C_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2C_Init()/ HAL_I2C_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2C_Init()/ HAL_I2C_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2C_RegisterCallback() before calling HAL_I2C_DeInit() + or HAL_I2C_Init() function. + [..] + When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the I2C HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup I2C I2C + * @brief I2C HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup I2C_Private_Define I2C Private Define + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */ +#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */ + +#define MAX_NBYTE_SIZE 255U +#define SLAVE_ADDR_SHIFT 7U +#define SLAVE_ADDR_MSK 0x06U + +/* Private define for @ref PreviousState usage */ +#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | \ + (uint32_t)HAL_I2C_STATE_BUSY_RX) & \ + (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) +/*!< Mask State define, keep only RX and TX bits */ +#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) +/*!< Default Value */ +#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MASTER)) +/*!< Master Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_SLAVE)) +/*!< Slave Busy RX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy TX, combinaison of State LSB and Mode enum */ +#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \ + (uint32_t)HAL_I2C_MODE_MEM)) +/*!< Memory Busy RX, combinaison of State LSB and Mode enum */ + + +/* Private define to centralize the enable/disable of Interrupts */ +#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with + @ref I2C_XFER_LISTEN_IT */ +#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref I2C_XFER_TX_IT + and @ref I2C_XFER_RX_IT */ + +#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error + and NACK treatment */ +#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */ +#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */ + +/* Private define Sequential Transfer Options default/reset value */ +#define I2C_NO_OPTION_FRAME (0xFFFF0000U) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_Private_Macro + * @{ + */ +#if defined(HAL_DMA_MODULE_ENABLED) +/* Macro to get remaining data to transfer on DMA side */ +#define I2C_GET_DMA_REMAIN_DATA(__HANDLE__) __HAL_DMA_GET_COUNTER(__HANDLE__) +#endif /* HAL_DMA_MODULE_ENABLED */ +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup I2C_Private_Functions I2C Private Functions + * @{ + */ +#if defined(HAL_DMA_MODULE_ENABLED) +/* Private functions to handle DMA transfer */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma); +static void I2C_DMAError(DMA_HandleTypeDef *hdma); +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma); + +#endif /* HAL_DMA_MODULE_ENABLED */ + +/* Private functions to handle IT transfer */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c); +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags); +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode); + +/* Private functions to handle IT transfer */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions for I2C transfer IRQ handler */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +#if defined(HAL_DMA_MODULE_ENABLED) +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources); +#endif /* HAL_DMA_MODULE_ENABLED */ + +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest); + +/* Private function to treat different error callback */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c); + +/* Private function to flush TXDR register */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c); + +/* Private function to handle start, restart or stop a transfer */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request); + +/* Private function to Convert Specific options */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup I2C_Exported_Functions I2C Exported Functions + * @{ + */ + +/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the I2Cx peripheral: + + (+) User must Implement HAL_I2C_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2C_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + + (+) Call the function HAL_I2C_DeInit() to restore the default configuration + of the selected I2Cx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the I2C according to the specified parameters + * in the I2C_InitTypeDef and initialize the associated handle. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1)); + assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode)); + assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode)); + assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2)); + assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks)); + assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode)); + assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode)); + + if (hi2c->State == HAL_I2C_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2c->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + /* Init the I2C Callback settings */ + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + + if (hi2c->MspInitCallback == NULL) + { + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hi2c->MspInitCallback(hi2c); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2C_MspInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /*---------------------------- I2Cx TIMINGR Configuration ------------------*/ + /* Configure I2Cx: Frequency range */ + hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- I2Cx OAR1 Configuration ---------------------*/ + /* Disable Own Address1 before set the Own Address1 configuration */ + hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + /* Configure I2Cx: Own Address1 and ack own address1 mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT) + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1); + } + else /* I2C_ADDRESSINGMODE_10BIT */ + { + hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1); + } + + /*---------------------------- I2Cx CR2 Configuration ----------------------*/ + /* Configure I2Cx: Addressing Master mode */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + SET_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + else + { + /* Clear the I2C ADD10 bit */ + CLEAR_BIT(hi2c->Instance->CR2, I2C_CR2_ADD10); + } + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */ + hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- I2Cx OAR2 Configuration ---------------------*/ + /* Disable Own Address2 before set the Own Address2 configuration */ + hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE; + + /* Configure I2Cx: Dual mode and Own Address2 */ + hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \ + (hi2c->Init.OwnAddress2Masks << 8)); + + /*---------------------------- I2Cx CR1 Configuration ----------------------*/ + /* Configure I2Cx: Generalcall and NoStretch mode */ + hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode); + + /* Enable the selected I2C peripheral */ + __HAL_I2C_ENABLE(hi2c); + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + return HAL_OK; +} + +/** + * @brief DeInitialize the I2C peripheral. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c) +{ + /* Check the I2C handle allocation */ + if (hi2c == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the I2C Peripheral Clock */ + __HAL_I2C_DISABLE(hi2c); + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + if (hi2c->MspDeInitCallback == NULL) + { + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hi2c->MspDeInitCallback(hi2c); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_I2C_MspDeInit(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + hi2c->State = HAL_I2C_STATE_RESET; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Initialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the I2C MSP. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User I2C Callback + * To be used instead of the weak predefined callback + * @note The HAL_I2C_RegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, + pI2C_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = pCallback; + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = pCallback; + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = pCallback; + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = pCallback; + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = pCallback; + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = pCallback; + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = pCallback; + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = pCallback; + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an I2C Callback + * I2C callback is redirected to the weak predefined callback + * @note The HAL_I2C_UnRegisterCallback() may be called before HAL_I2C_Init() in HAL_I2C_STATE_RESET + * to un-register callbacks for HAL_I2C_MSPINIT_CB_ID and HAL_I2C_MSPDEINIT_CB_ID. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID + * @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID + * @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID + * @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID + * @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MASTER_TX_COMPLETE_CB_ID : + hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_I2C_MASTER_RX_COMPLETE_CB_ID : + hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID : + hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID : + hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_I2C_LISTEN_COMPLETE_CB_ID : + hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_I2C_MEM_TX_COMPLETE_CB_ID : + hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */ + break; + + case HAL_I2C_MEM_RX_COMPLETE_CB_ID : + hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */ + break; + + case HAL_I2C_ERROR_CB_ID : + hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2C_ABORT_CB_ID : + hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2C_STATE_RESET == hi2c->State) + { + switch (CallbackID) + { + case HAL_I2C_MSPINIT_CB_ID : + hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2C_MSPDEINIT_CB_ID : + hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register the Slave Address Match I2C Callback + * To be used instead of the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Slave Address Match I2C Callback + * Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_I2C_STATE_READY == hi2c->State) + { + hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2C data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2C_Master_Transmit() + (++) HAL_I2C_Master_Receive() + (++) HAL_I2C_Slave_Transmit() + (++) HAL_I2C_Slave_Receive() + (++) HAL_I2C_Mem_Write() + (++) HAL_I2C_Mem_Read() + (++) HAL_I2C_IsDeviceReady() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2C_Master_Transmit_IT() + (++) HAL_I2C_Master_Receive_IT() + (++) HAL_I2C_Slave_Transmit_IT() + (++) HAL_I2C_Slave_Receive_IT() + (++) HAL_I2C_Mem_Write_IT() + (++) HAL_I2C_Mem_Read_IT() + (++) HAL_I2C_Master_Seq_Transmit_IT() + (++) HAL_I2C_Master_Seq_Receive_IT() + (++) HAL_I2C_Slave_Seq_Transmit_IT() + (++) HAL_I2C_Slave_Seq_Receive_IT() + (++) HAL_I2C_EnableListen_IT() + (++) HAL_I2C_DisableListen_IT() + (++) HAL_I2C_Master_Abort_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2C_Master_Transmit_DMA() + (++) HAL_I2C_Master_Receive_DMA() + (++) HAL_I2C_Slave_Transmit_DMA() + (++) HAL_I2C_Slave_Receive_DMA() + (++) HAL_I2C_Mem_Write_DMA() + (++) HAL_I2C_Mem_Read_DMA() + (++) HAL_I2C_Master_Seq_Transmit_DMA() + (++) HAL_I2C_Master_Seq_Receive_DMA() + (++) HAL_I2C_Slave_Seq_Transmit_DMA() + (++) HAL_I2C_Slave_Seq_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2C_MasterTxCpltCallback() + (++) HAL_I2C_MasterRxCpltCallback() + (++) HAL_I2C_SlaveTxCpltCallback() + (++) HAL_I2C_SlaveRxCpltCallback() + (++) HAL_I2C_MemTxCpltCallback() + (++) HAL_I2C_MemRxCpltCallback() + (++) HAL_I2C_AddrCallback() + (++) HAL_I2C_ListenCpltCallback() + (++) HAL_I2C_ErrorCallback() + (++) HAL_I2C_AbortCpltCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmits in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receives in master mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmits in slave mode an amount of data in blocking mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t tmpXferCount; + HAL_StatusTypeDef error; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* If 10bit addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Wait until DIR flag is set Transmitter mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + } + + /* Wait until AF flag is set */ + error = I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout, tickstart); + + if (error != HAL_OK) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + + tmpXferCount = hi2c->XferCount; + if ((hi2c->ErrorCode == HAL_I2C_ERROR_AF) && (tmpXferCount == 0U)) + { + /* Reset ErrorCode to NONE */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + } + else + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear AF flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in blocking mode + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferISR = NULL; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Wait until ADDR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Wait until DIR flag is reset Receiver mode */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + while (hi2c->XferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Store Last receive data if any */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Wait until STOP flag is set */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Clear STOP flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Wait until BUSY flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK) + { + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + return HAL_ERROR; + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), xfermode, + I2C_GENERATE_START_WRITE); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, + I2C_GENERATE_START_WRITE); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_IT; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Transmit in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)(hi2c->XferSize + 1U), + xfermode, I2C_GENERATE_START_WRITE); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, I2C_AUTOEND_MODE, + I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size) +{ + uint32_t xfermode; + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Master_ISR_DMA; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = I2C_AUTOEND_MODE; + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address */ + /* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + /* Preload TX data if no stretch enable */ + if (hi2c->Init.NoStretchMode == I2C_NOSTRETCH_ENABLE) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + + if (hi2c->XferCount != 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, + (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave mode an amount of data in non-blocking mode with DMA + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Write an amount of data in blocking mode to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + do + { + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in blocking mode from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferISR = NULL; + + /* Send Slave Address and Memory Address */ + if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, + I2C_GENERATE_START_READ); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + } + + do + { + /* Wait until RXNE flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, + I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_NO_STARTSTOP); + } + } + } while (hi2c->XferCount > 0U); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->XferSize = 0U; + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_IT; + hi2c->Devaddress = DevAddress; + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Write an amount of data in non-blocking mode with DMA to a specific memory address + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param pData Pointer to data buffer + * @param Size Amount of data to be read + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, + uint16_t MemAddSize, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_MEMADD_SIZE(MemAddSize)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MEM; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferISR = I2C_Mem_ISR_DMA; + hi2c->Devaddress = DevAddress; + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Prefetch Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + /* If Memory address size is 16Bit */ + else + { + /* Prefetch Memory Address (MSB part, LSB will be manage through interrupt) */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Prepare Memaddress buffer for LSB part */ + hi2c->Memaddress = I2C_MEM_ADD_LSB(MemAddress); + } + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and Memory Address */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Checks if target device is ready for communication. + * @note This function is used with Memory devices + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t I2C_Trials = 0UL; + + HAL_StatusTypeDef status = HAL_OK; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hi2c->State == HAL_I2C_STATE_READY) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + do + { + /* Generate Start */ + hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + + tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF); + tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + /* A non acknowledge appear during STOP Flag waiting process, a new trial must be performed */ + if (hi2c->ErrorCode == HAL_I2C_ERROR_AF) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Reset the error code for next trial */ + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + else + { + status = HAL_ERROR; + } + } + else + { + /* A acknowledge appear during STOP Flag waiting process, this mean that device respond to its address */ + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Device is ready */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + } + else + { + /* A non acknowledge is detected, this mean that device not respond to its address, + a new trial must be performed */ + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOPF flag is reset */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK) + { + status = HAL_ERROR; + } + else + { + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + } + + /* Increment Trials */ + I2C_Trials++; + + if ((I2C_Trials < Trials) && (status == HAL_ERROR)) + { + status = HAL_OK; + } + + } while (I2C_Trials < Trials); + + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + uint32_t sizetoxfer = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to write */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA. + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_WRITE; + HAL_StatusTypeDef dmaxferstatus; + uint32_t sizetoxfer = 0U; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_TX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + if ((hi2c->XferSize > 0U) && ((XferOptions == I2C_FIRST_FRAME) || \ + (XferOptions == I2C_FIRST_AND_LAST_FRAME))) + { + /* Preload TX register */ + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + sizetoxfer = hi2c->XferSize; + hi2c->XferCount--; + hi2c->XferSize--; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, + (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to write */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to write and generate START condition */ + if ((XferOptions == I2C_FIRST_FRAME) || (XferOptions == I2C_FIRST_AND_LAST_FRAME)) + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)sizetoxfer, xfermode, xferrequest); + } + else + { + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_IT; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t xfermode; + uint32_t xferrequest = I2C_GENERATE_START_READ; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY_RX; + hi2c->Mode = HAL_I2C_MODE_MASTER; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Master_ISR_DMA; + + /* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + xfermode = hi2c->XferOptions; + } + + /* If transfer direction not change and there is no request to start another frame, + do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \ + (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0)) + { + xferrequest = I2C_NO_STARTSTOP; + } + else + { + /* Convert OTHER_xxx XferOptions if any */ + I2C_ConvertOtherXferOptions(hi2c); + + /* Update xfermode accordingly if no reload is necessary */ + if (hi2c->XferCount <= MAX_NBYTE_SIZE) + { + xfermode = hi2c->XferOptions; + } + } + + if (hi2c->XferSize > 0U) + { + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Send Slave Address and set NBYTES to read */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR and NACK interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + else + { + /* Update Transfer ISR function pointer */ + hi2c->XferISR = I2C_Master_ISR_IT; + + /* Send Slave Address */ + /* Set NBYTES to read and generate START condition */ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, + I2C_GENERATE_START_READ); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + /* possible to enable all of these */ + /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | + I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort DMA Xfer if any */ + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave RX state to TX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt; + + /* Set the DMA error callback */ + hi2c->hdmatx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmatx->XferHalfCpltCallback = NULL; + hi2c->hdmatx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* Enable ERR, STOP, NACK, ADDR interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + +#if defined(HAL_DMA_MODULE_ENABLED) + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_IT; + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA + * @note This interface allow to manage repeated start condition when a direction change during transfer + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + FlagStatus tmp; + HAL_StatusTypeDef dmaxferstatus; + + /* Check the parameters */ + assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0U)) + { + hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* I2C cannot manage full duplex exchange so disable previous IT enabled if any */ + /* and then toggle the HAL slave TX state to RX state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Disable associated Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + /* Abort DMA Xfer if any */ + if (hi2c->hdmatx != NULL) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + } + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Abort DMA Xfer if any */ + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + } + } + else + { + /* Nothing to do */ + } + + hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN; + hi2c->Mode = HAL_I2C_MODE_SLAVE; + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + + /* Enable Address Acknowledge */ + hi2c->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hi2c->pBuffPtr = pData; + hi2c->XferCount = Size; + hi2c->XferSize = hi2c->XferCount; + hi2c->XferOptions = XferOptions; + hi2c->XferISR = I2C_Slave_ISR_DMA; + + if (hi2c->hdmarx != NULL) + { + /* Set the I2C DMA transfer complete callback */ + hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt; + + /* Set the DMA error callback */ + hi2c->hdmarx->XferErrorCallback = I2C_DMAError; + + /* Set the unused DMA callbacks to NULL */ + hi2c->hdmarx->XferHalfCpltCallback = NULL; + hi2c->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, + (uint32_t)pData, hi2c->XferSize); + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + if (dmaxferstatus == HAL_OK) + { + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Reset XferSize */ + hi2c->XferSize = 0; + } + else + { + /* Update I2C state */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Update I2C error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + + tmp = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR); + if ((I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT) && (tmp != RESET)) + { + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the Master */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Enable DMA Request */ + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_READY) + { + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + + /* Enable the Address Match interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c) +{ + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + uint32_t tmp; + + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK; + hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode); + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Disable the Address Match interrupt */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master or memory I2C IT or DMA process communication with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress) +{ + HAL_I2C_ModeTypeDef tmp_mode = hi2c->Mode; + + if ((tmp_mode == HAL_I2C_MODE_MASTER) || (tmp_mode == HAL_I2C_MODE_MEM)) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Set State at HAL_I2C_STATE_ABORT */ + hi2c->State = HAL_I2C_STATE_ABORT; + + /* Set NBYTES to 1 to generate a dummy read on I2C peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Note : The I2C interrupts must be enabled after unlocking current process + to avoid the risk of I2C interrupt handle execution before current + process unlock */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + return HAL_OK; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } +} + +/** + * @} + */ + +/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief This function handles I2C event interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c) /* Derogation MISRAC2012-Rule-8.13 */ +{ + /* Get current IT Flags and IT sources value */ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + + /* I2C events treatment -------------------------------------*/ + if (hi2c->XferISR != NULL) + { + hi2c->XferISR(hi2c, itflags, itsources); + } +} + +/** + * @brief This function handles I2C error interrupt request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c) +{ + uint32_t itflags = READ_REG(hi2c->Instance->ISR); + uint32_t itsources = READ_REG(hi2c->Instance->CR1); + uint32_t tmperror; + + /* I2C Bus error interrupt occurred ------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + } + + /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + } + + /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/ + if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && \ + (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + } + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE) + { + I2C_ITError(hi2c, tmperror); + } +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MasterRxCpltCallback could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Memory Tx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemTxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Memory Rx Transfer completed callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_MemRxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2C error callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_ErrorCallback could be implemented in the user file + */ +} + +/** + * @brief I2C abort callback. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval None + */ +__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2c); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_I2C_AbortCpltCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions + * @brief Peripheral State, Mode and Error functions + * +@verbatim + =============================================================================== + ##### Peripheral State, Mode and Error functions ##### + =============================================================================== + [..] + This subsection permit to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2C handle state. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval HAL state + */ +HAL_I2C_StateTypeDef HAL_I2C_GetState(const I2C_HandleTypeDef *hi2c) +{ + /* Return I2C handle state */ + return hi2c->State; +} + +/** + * @brief Returns the I2C Master, Slave, Memory or no mode. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for I2C module + * @retval HAL mode + */ +HAL_I2C_ModeTypeDef HAL_I2C_GetMode(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->Mode; +} + +/** + * @brief Return the I2C error code. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @retval I2C Error Code + */ +uint32_t HAL_I2C_GetError(const I2C_HandleTypeDef *hi2c) +{ + return hi2c->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2C_Private_Functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) == RESET) && \ + ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))) + { + /* Write data to TXDR */ + if (hi2c->XferCount != 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + hi2c->XferOptions, I2C_NO_STARTSTOP); + } + else + { + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + uint32_t tmpITFlags = ITFlags; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + /* Error callback will be send during stop flag treatment */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + if (hi2c->Memaddress == 0xFFFFFFFFU) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + else + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U)) + { + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + } + else + { + /* Nothing to do */ + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, tmpITFlags); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t tmpITFlags = ITFlags; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET)) + { + if (hi2c->XferCount > 0U) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferSize--; + hi2c->XferCount--; + } + + if ((hi2c->XferCount == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, tmpITFlags); + } + else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hi2c->XferCount > 0U) + { + /* Write data to TXDR */ + hi2c->Instance->TXDR = *hi2c->pBuffPtr; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + hi2c->XferCount--; + hi2c->XferSize--; + } + else + { + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint16_t devaddress; + uint32_t xfermode; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable TC interrupt */ + __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI); + + if (hi2c->XferCount != 0U) + { + /* Recover Slave address */ + devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD); + + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + xfermode = I2C_RELOAD_MODE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + xfermode = hi2c->XferOptions; + } + else + { + xfermode = I2C_AUTOEND_MODE; + } + } + + /* Set the new XferSize in Nbytes register */ + I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP); + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Call TxCpltCallback() if no stop mode is set */ + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + if (hi2c->XferCount == 0U) + { + if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE) + { + /* Generate a stop condition in case of no transfer option */ + if (hi2c->XferOptions == I2C_NO_OPTION_FRAME) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + } + else + { + /* Call I2C Master Sequential complete process */ + I2C_ITMasterSeqCplt(hi2c); + } + } + } + else + { + /* Wrong size Status regarding TC flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Memory Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Mem_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t direction = I2C_GENERATE_START_WRITE; + + /* Process Locked */ + __HAL_LOCK(hi2c); + + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set corresponding Error Code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* No need to generate STOP, it is automatically done */ + /* But enable STOP interrupt, to treat it */ + /* Error callback will be send during stop flag treatment */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TXIS) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET)) + { + /* Write LSB part of Memory Address */ + hi2c->Instance->TXDR = hi2c->Memaddress; + + /* Reset Memaddress content */ + hi2c->Memaddress = 0xFFFFFFFFU; + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->XferCount != 0U) + { + /* Prepare the new XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, I2C_NO_STARTSTOP); + } + else + { + hi2c->XferSize = hi2c->XferCount; + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, I2C_NO_STARTSTOP); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else + { + /* Wrong size Status regarding TCR flag event */ + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET)) + { + /* Disable Interrupt related to address step */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Enable only Error and NACK interrupt for data transfer */ + I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT); + + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + direction = I2C_GENERATE_START_READ; + } + + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + + /* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_RELOAD_MODE, direction); + } + else + { + hi2c->XferSize = hi2c->XferCount; + + /* Set NBYTES to write and generate RESTART */ + I2C_TransferConfig(hi2c, (uint16_t)hi2c->Devaddress, (uint8_t)hi2c->XferSize, + I2C_AUTOEND_MODE, direction); + } + + /* Update XferCount value */ + hi2c->XferCount -= hi2c->XferSize; + + /* Enable DMA Request */ + if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN; + } + else + { + hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Master complete process */ + I2C_ITMasterCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param ITFlags Interrupt flags to handle. + * @param ITSources Interrupt sources enabled. + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, + uint32_t ITSources) +{ + uint32_t tmpoptions = hi2c->XferOptions; + uint32_t treatdmanack = 0U; + HAL_I2C_StateTypeDef tmpstate; + + /* Process locked */ + __HAL_LOCK(hi2c); + + /* Check if STOPF is set */ + if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET)) + { + /* Call I2C Slave complete process */ + I2C_ITSlaveCplt(hi2c, ITFlags); + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0 */ + /* So clear Flag NACKF only */ + if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) || + (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)) + { + /* Split check of hdmarx, for MISRA compliance */ + if (hi2c->hdmarx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) + { + treatdmanack = 1U; + } + } + } + + /* Split check of hdmatx, for MISRA compliance */ + if (hi2c->hdmatx != NULL) + { + if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) + { + if (I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx) == 0U) + { + treatdmanack = 1U; + } + } + } + + if (treatdmanack == 1U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, ITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + /* Store current hi2c->State, solve MISRA2012-Rule-13.5 */ + tmpstate = hi2c->State; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + else + { + /* Only Clear NACK Flag, no DMA treatment is pending */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && \ + (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET)) + { + I2C_ITAddrCplt(hi2c, ITFlags); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Master sends target device address followed by internal memory address for write request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TCR flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Master sends target device address followed by internal memory address for read request. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param MemAddress Internal memory address + * @param MemAddSize Size of internal memory address + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, + uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, + uint32_t Tickstart) +{ + I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* If Memory address size is 8Bit */ + if (MemAddSize == I2C_MEMADD_SIZE_8BIT) + { + /* Send Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + /* If Memory address size is 16Bit */ + else + { + /* Send MSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); + + /* Wait until TXIS flag is set */ + if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Send LSB of Memory Address */ + hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress); + } + + /* Wait until TC flag is set */ + if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief I2C Address complete process callback. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint8_t transferdirection; + uint16_t slaveaddrcode; + uint16_t ownadd1code; + uint16_t ownadd2code; + + /* Prevent unused argument(s) compilation warning */ + UNUSED(ITFlags); + + /* In case of Listen state, need to inform upper layer of address match code event */ + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN) + { + transferdirection = I2C_GET_DIR(hi2c); + slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c); + ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c); + ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c); + + /* If 10bits addressing mode is selected */ + if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT) + { + if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK)) + { + slaveaddrcode = ownadd1code; + hi2c->AddrEventCount++; + if (hi2c->AddrEventCount == 2U) + { + /* Reset Address Event counter */ + hi2c->AddrEventCount = 0U; + + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + slaveaddrcode = ownadd2code; + + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* else 7 bits addressing mode is selected */ + else + { + /* Disable ADDR Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call Slave Addr callback */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode); +#else + HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* Else clear address flag only */ + else + { + /* Clear ADDR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } +} + +/** + * @brief I2C Master sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c) +{ + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + hi2c->XferISR = NULL; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Slave sequential complete process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + + /* Reset I2C handle mode */ + hi2c->Mode = HAL_I2C_MODE_NONE; + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + else + { + /* Do nothing */ + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN) + { + /* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + + /* Disable Interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Master complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmperror; + uint32_t tmpITFlags = ITFlags; + __IO uint32_t tmpreg; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX; + } + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX; + } + else + { + /* Do nothing */ + } + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Reset handle parameters */ + hi2c->XferISR = NULL; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set acknowledge error code */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Fetch Last receive data if any */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)) + { + /* Read data from RXDR */ + tmpreg = (uint8_t)hi2c->Instance->RXDR; + UNUSED(tmpreg); + } + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Store current volatile hi2c->ErrorCode, misra rule */ + tmperror = hi2c->ErrorCode; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + /* hi2c->State == HAL_I2C_STATE_BUSY_TX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_TX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemTxCpltCallback(hi2c); +#else + HAL_I2C_MemTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterTxCpltCallback(hi2c); +#else + HAL_I2C_MasterTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + /* hi2c->State == HAL_I2C_STATE_BUSY_RX */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + if (hi2c->Mode == HAL_I2C_MODE_MEM) + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MemRxCpltCallback(hi2c); +#else + HAL_I2C_MemRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->MasterRxCpltCallback(hi2c); +#else + HAL_I2C_MasterRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } +} + +/** + * @brief I2C Slave complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1); + uint32_t tmpITFlags = ITFlags; + uint32_t tmpoptions = hi2c->XferOptions; + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Disable Interrupts and Store Previous state */ + if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX; + } + else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX; + } + else if (tmpstate == HAL_I2C_STATE_LISTEN) + { + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT | I2C_XFER_RX_IT); + hi2c->PreviousState = I2C_STATE_NONE; + } + else + { + /* Do nothing */ + } + + /* Disable Address Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If a DMA is ongoing, Update handle size context */ + if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + if (hi2c->hdmatx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmatx); + } + } + else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + if (hi2c->hdmarx != NULL) + { + hi2c->XferCount = (uint16_t)I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx); + } + } + else + { + /* Do nothing */ + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Remove RXNE flag on temporary variable as read done */ + tmpITFlags &= ~I2C_FLAG_RXNE; + + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + } + } + + /* All data are not transferred, so set error code accordingly */ + if (hi2c->XferCount != 0U) + { + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \ + (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_IT_NACKI) != RESET)) + { + /* Check that I2C transfer finished */ + /* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hi2c->XferCount == 0U) + { + if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) + /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for + Warning[Pa134]: left and right operands are identical */ + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + } + } + else + { + /* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/ + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + + if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME)) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + } + } + } + + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, hi2c->ErrorCode); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ + if (hi2c->State == HAL_I2C_STATE_LISTEN) + { + /* Call I2C Listen complete process */ + I2C_ITListenCplt(hi2c, tmpITFlags); + } + } + else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME) + { + /* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */ + I2C_ITSlaveSeqCplt(hi2c); + + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + /* Call the corresponding callback to inform upper layer of End of Transfer */ + else if (hi2c->State == HAL_I2C_STATE_BUSY_RX) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveRxCpltCallback(hi2c); +#else + HAL_I2C_SlaveRxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->SlaveTxCpltCallback(hi2c); +#else + HAL_I2C_SlaveTxCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Listen complete process. + * @param hi2c I2C handle. + * @param ITFlags Interrupt flags to handle. + * @retval None + */ +static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags) +{ + /* Reset handle parameters */ + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->PreviousState = I2C_STATE_NONE; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferISR = NULL; + + /* Store Last receive data if any */ + if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR; + + /* Increment Buffer pointer */ + hi2c->pBuffPtr++; + + if ((hi2c->XferSize > 0U)) + { + hi2c->XferSize--; + hi2c->XferCount--; + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + } + + /* Disable all Interrupts*/ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Clear NACK Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ListenCpltCallback(hi2c); +#else + HAL_I2C_ListenCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ +} + +/** + * @brief I2C interrupts error process. + * @param hi2c I2C handle. + * @param ErrorCode Error code to handle. + * @retval None + */ +static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode) +{ + HAL_I2C_StateTypeDef tmpstate = hi2c->State; + +#if defined(HAL_DMA_MODULE_ENABLED) + uint32_t tmppreviousstate; +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset handle parameters */ + hi2c->Mode = HAL_I2C_MODE_NONE; + hi2c->XferOptions = I2C_NO_OPTION_FRAME; + hi2c->XferCount = 0U; + + /* Set new error code */ + hi2c->ErrorCode |= ErrorCode; + + /* Disable Interrupts */ + if ((tmpstate == HAL_I2C_STATE_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) || + (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN)) + { + /* Disable all interrupts, except interrupts related to LISTEN state */ + I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* keep HAL_I2C_STATE_LISTEN if set */ + hi2c->State = HAL_I2C_STATE_LISTEN; + hi2c->XferISR = I2C_Slave_ISR_IT; + } + else + { + /* Disable all interrupts */ + I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT); + + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* If state is an abort treatment on going, don't change state */ + /* This change will be do later */ + if (hi2c->State != HAL_I2C_STATE_ABORT) + { + /* Set HAL_I2C_STATE_READY */ + hi2c->State = HAL_I2C_STATE_READY; + + /* Check if a STOPF is detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) + { + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode |= HAL_I2C_ERROR_AF; + } + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + } + hi2c->XferISR = NULL; + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort DMA TX transfer if any */ + tmppreviousstate = hi2c->PreviousState; + + if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK) + { + /* Call Directly XferAbortCallback function in case of error */ + hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + /* Abort DMA RX transfer if any */ + else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \ + (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX))) + { + if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN) + { + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + } + + if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY) + { + /* Set the I2C DMA Abort callback : + will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */ + hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK) + { + /* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */ + hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx); + } + } + else + { + I2C_TreatErrorCallback(hi2c); + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + I2C_TreatErrorCallback(hi2c); + } +} + +/** + * @brief I2C Error callback treatment. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c) +{ + if (hi2c->State == HAL_I2C_STATE_ABORT) + { + hi2c->State = HAL_I2C_STATE_READY; + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->AbortCpltCallback(hi2c); +#else + HAL_I2C_AbortCpltCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } + else + { + hi2c->PreviousState = I2C_STATE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1) + hi2c->ErrorCallback(hi2c); +#else + HAL_I2C_ErrorCallback(hi2c); +#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */ + } +} + +/** + * @brief I2C Tx data register flush process. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET) + { + hi2c->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE); + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA I2C master transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave transmit process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; + + /* Last Byte is Transmitted */ + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C master receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* If last transfer, enable STOP interrupt */ + if (hi2c->XferCount == 0U) + { + /* Enable STOP interrupt */ + I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT); + } + /* else prepare a new DMA transfer and enable TCReload interrupt */ + else + { + /* Update Buffer pointer */ + hi2c->pBuffPtr += hi2c->XferSize; + + /* Set the XferSize to transfer */ + if (hi2c->XferCount > MAX_NBYTE_SIZE) + { + hi2c->XferSize = MAX_NBYTE_SIZE; + } + else + { + hi2c->XferSize = hi2c->XferCount; + } + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, + hi2c->XferSize) != HAL_OK) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); + } + else + { + /* Enable TC interrupts */ + I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT); + } + } +} + + +/** + * @brief DMA I2C slave receive process complete callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + uint32_t tmpoptions = hi2c->XferOptions; + + if ((I2C_GET_DMA_REMAIN_DATA(hi2c->hdmarx) == 0U) && \ + (tmpoptions != I2C_NO_OPTION_FRAME)) + { + /* Disable DMA Request */ + hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; + + /* Call I2C Slave Sequential complete process */ + I2C_ITSlaveSeqCplt(hi2c); + } + else + { + /* No specific action, Master fully manage the generation of STOP condition */ + /* Mean that this generation can arrive at any time, at the end or during DMA process */ + /* So STOP condition should be manage through Interrupt treatment */ + } +} + + +/** + * @brief DMA I2C communication error callback. + * @param hdma DMA handle + * @retval None + */ +static void I2C_DMAError(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Disable Acknowledge */ + hi2c->Instance->CR2 |= I2C_CR2_NACK; + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + I2C_ITError(hi2c, HAL_I2C_ERROR_DMA); +} + + +/** + * @brief DMA I2C communication abort callback + * (To be called at end of DMA Abort procedure). + * @param hdma DMA handle. + * @retval None + */ +static void I2C_DMAAbort(DMA_HandleTypeDef *hdma) +{ + /* Derogation MISRAC2012-Rule-11.5 */ + I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); + + /* Reset AbortCpltCallback */ + if (hi2c->hdmatx != NULL) + { + hi2c->hdmatx->XferAbortCallback = NULL; + } + if (hi2c->hdmarx != NULL) + { + hi2c->hdmarx->XferAbortCallback = NULL; + } + + I2C_TreatErrorCallback(hi2c); +} + +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief This function handles I2C Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Flag Specifies the I2C flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, + uint32_t Timeout, uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of STOP flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + return HAL_ERROR; + } + + /* Check for the Timeout */ + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_ERROR; + } + } + } + return HAL_OK; +} + +/** + * @brief This function handles I2C Communication Timeout for specific usage of RXNE flag. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, + uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET) && (status == HAL_OK)) + { + /* Check if an error is detected */ + if (I2C_IsErrorOccurred(hi2c, Timeout, Tickstart) != HAL_OK) + { + status = HAL_ERROR; + } + + /* Check if a STOPF is detected */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) && (status == HAL_OK)) + { + /* Check if an RXNE is pending */ + /* Store Last receive data if any */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U)) + { + /* Return HAL_OK */ + /* The Reading of data from RXDR will be done in caller function */ + status = HAL_OK; + } + + /* Check a no-acknowledge have been detected */ + if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) + { + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + hi2c->ErrorCode = HAL_I2C_ERROR_AF; + + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + else + { + hi2c->ErrorCode = HAL_I2C_ERROR_NONE; + } + } + + /* Check for the Timeout */ + if ((((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) && (status == HAL_OK)) + { + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)) + { + hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT; + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + status = HAL_ERROR; + } + } + } + return status; +} + +/** + * @brief This function handles errors detection during an I2C Communication. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param Timeout Timeout duration + * @param Tickstart Tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef I2C_IsErrorOccurred(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t itflag = hi2c->Instance->ISR; + uint32_t error_code = 0; + uint32_t tickstart = Tickstart; + uint32_t tmp1; + HAL_I2C_ModeTypeDef tmp2; + + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_AF)) + { + /* Clear NACKF Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF); + + /* Wait until STOP Flag is set or timeout occurred */ + /* AutoEnd should be initiate after AF */ + while ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (status == HAL_OK)) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + tmp1 = (uint32_t)(hi2c->Instance->CR2 & I2C_CR2_STOP); + tmp2 = hi2c->Mode; + + /* In case of I2C still busy, try to regenerate a STOP manually */ + if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) != RESET) && \ + (tmp1 != I2C_CR2_STOP) && \ + (tmp2 != HAL_I2C_MODE_SLAVE)) + { + /* Generate Stop */ + hi2c->Instance->CR2 |= I2C_CR2_STOP; + + /* Update Tick with new reference */ + tickstart = HAL_GetTick(); + } + + while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) + { + /* Check for the Timeout */ + if ((HAL_GetTick() - tickstart) > I2C_TIMEOUT_STOPF) + { + error_code |= HAL_I2C_ERROR_TIMEOUT; + + status = HAL_ERROR; + + break; + } + } + } + } + } + + /* In case STOP Flag is detected, clear it */ + if (status == HAL_OK) + { + /* Clear STOP Flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF); + } + + error_code |= HAL_I2C_ERROR_AF; + + status = HAL_ERROR; + } + + /* Refresh Content of Status register */ + itflag = hi2c->Instance->ISR; + + /* Then verify if an additional errors occurs */ + /* Check if a Bus error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_BERR)) + { + error_code |= HAL_I2C_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR); + + status = HAL_ERROR; + } + + /* Check if an Over-Run/Under-Run error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_OVR)) + { + error_code |= HAL_I2C_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR); + + status = HAL_ERROR; + } + + /* Check if an Arbitration Loss error occurred */ + if (HAL_IS_BIT_SET(itflag, I2C_FLAG_ARLO)) + { + error_code |= HAL_I2C_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO); + + status = HAL_ERROR; + } + + if (status != HAL_OK) + { + /* Flush TX register */ + I2C_Flush_TXDR(hi2c); + + /* Clear Configuration Register 2 */ + I2C_RESET_CR2(hi2c); + + hi2c->ErrorCode |= error_code; + hi2c->State = HAL_I2C_STATE_READY; + hi2c->Mode = HAL_I2C_MODE_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + } + + return status; +} + +/** + * @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hi2c I2C handle. + * @param DevAddress Specifies the slave address to be programmed. + * @param Size Specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_RELOAD_MODE Enable Reload mode . + * @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref I2C_SOFTEND_MODE Enable Software end mode. + * @param Request New state of the I2C START condition generation. + * This parameter can be one of the following values: + * @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref I2C_GENERATE_START_READ Generate Restart for read request. + * @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, + uint32_t Request) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_TRANSFER_MODE(Mode)); + assert_param(IS_TRANSFER_REQUEST(Request)); + + /* Declaration of tmp to prevent undefined behavior of volatile usage */ + tmp = ((uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request) & (~0x80000000U)); + + /* update CR2 register */ + MODIFY_REG(hi2c->Instance->CR2, \ + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP)), tmp); +} + +/** + * @brief Manage the enabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + +#if defined(HAL_DMA_MODULE_ENABLED) + if ((hi2c->XferISR != I2C_Master_ISR_DMA) && \ + (hi2c->XferISR != I2C_Slave_ISR_DMA) && \ + (hi2c->XferISR != I2C_Mem_ISR_DMA)) +#endif /* HAL_DMA_MODULE_ENABLED */ + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + } + +#if defined(HAL_DMA_MODULE_ENABLED) + else + { + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Enable ERR, STOP, NACK and ADDR interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Enable ERR, TC, STOP, NACK and TXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI; + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Enable ERR, TC, STOP, NACK and RXI interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI); + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Enable interrupts only at the end */ + /* to avoid the risk of I2C interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_I2C_ENABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Manage the disabling of Interrupts. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2C. + * @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition. + * @retval None + */ +static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest) +{ + uint32_t tmpisr = 0U; + + if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT) + { + /* Disable TC and TXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_TXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT) + { + /* Disable TC and RXI interrupts */ + tmpisr |= I2C_IT_TCI | I2C_IT_RXI; + + if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN) + { + /* Disable NACK and STOP interrupts */ + tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + } + + if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT) + { + /* Disable ADDR, NACK and STOP interrupts */ + tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI; + } + + if (InterruptRequest == I2C_XFER_ERROR_IT) + { + /* Enable ERR and NACK interrupts */ + tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI; + } + + if (InterruptRequest == I2C_XFER_CPLT_IT) + { + /* Enable STOP interrupts */ + tmpisr |= I2C_IT_STOPI; + } + + if (InterruptRequest == I2C_XFER_RELOAD_IT) + { + /* Enable TC interrupts */ + tmpisr |= I2C_IT_TCI; + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_I2C_DISABLE_IT(hi2c, tmpisr); +} + +/** + * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions. + * @param hi2c I2C handle. + * @retval None + */ +static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c) +{ + /* if user set XferOptions to I2C_OTHER_FRAME */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to I2C_FIRST_FRAME */ + if (hi2c->XferOptions == I2C_OTHER_FRAME) + { + hi2c->XferOptions = I2C_FIRST_FRAME; + } + /* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to I2C_FIRST_AND_LAST_FRAME */ + else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME) + { + hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME; + } + else + { + /* Nothing to do */ + } +} + +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_i2c_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_i2c_ex.c new file mode 100644 index 0000000000..c53f5f36fa --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_i2c_ex.c @@ -0,0 +1,240 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_i2c_ex.c + * @author MCD Application Team + * @brief I2C Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of I2C Extended peripheral: + * + Filter Mode Functions + * + FastModePlus Functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### I2C peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the I2C interface for STM32WL3x + devices contains the following additional features + + (+) Possibility to disable or enable Analog Noise Filter + (+) Use of a configured Digital Noise Filter + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + [..] This driver provides functions to: + (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter() + (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter() + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_I2CEx_EnableFastModePlus() + (++) HAL_I2CEx_DisableFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup I2CEx I2CEx + * @brief I2C Extended HAL module driver + * @{ + */ + +#ifdef HAL_I2C_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions + * @{ + */ + +/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions + * @brief Filter Mode Functions + * +@verbatim + =============================================================================== + ##### Filter Mode Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Noise Filters + +@endverbatim + * @{ + */ + +/** + * @brief Configure I2C Analog noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param AnalogFilter New state of the Analog filter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Reset I2Cx ANOFF bit */ + hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hi2c->Instance->CR1 |= AnalogFilter; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure I2C Digital noise filter. + * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains + * the configuration information for the specified I2Cx peripheral. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance)); + assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter)); + + if (hi2c->State == HAL_I2C_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hi2c); + + hi2c->State = HAL_I2C_STATE_BUSY; + + /* Disable the selected I2C peripheral */ + __HAL_I2C_DISABLE(hi2c); + + /* Get the old register value */ + tmpreg = hi2c->Instance->CR1; + + /* Reset I2Cx DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << 8U; + + /* Store the new register value */ + hi2c->Instance->CR1 = tmpreg; + + __HAL_I2C_ENABLE(hi2c); + + hi2c->State = HAL_I2C_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2c); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Enable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @retval None + */ +void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->I2C_FMP_CTRL, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the I2C fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref I2CEx_FastModePlus values + * @retval None + */ +void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus)); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->I2C_FMP_CTRL, (uint32_t)ConfigFastModePlus); +} +/** + * @} + */ +/** + * @} + */ + +#endif /* HAL_I2C_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_i2s.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_i2s.c new file mode 100644 index 0000000000..01e5a44134 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_i2s.c @@ -0,0 +1,1851 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_i2s.c + * @author MCD Application Team + * @brief I2S HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Integrated Interchip Sound (I2S) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The I2S HAL driver can be used as follow: + + (#) Declare a I2S_HandleTypeDef handle structure. + (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API: + (##) Enable the SPIx interface clock. + (##) I2S pins configuration: + (+++) Enable the clock for the I2S GPIOs. + (+++) Configure these I2S pins as alternate function pull-up. + (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT() + and HAL_I2S_Receive_IT() APIs). + (+++) Configure the I2Sx interrupt priority. + (+++) Enable the NVIC I2S IRQ handle. + (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA() + and HAL_I2S_Receive_DMA() APIs: + (+++) Declare a DMA handle structure for the Tx/Rx Stream/Channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx Stream/Channel. + (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the + DMA Tx/Rx Stream/Channel. + + (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity + using HAL_I2S_Init() function. + + -@- The specific I2S interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process. + -@- Make sure that either: + (+@) External clock source is configured after setting correctly + the define constant EXTERNAL_CLOCK_VALUE in the stm32wl3x_hal_conf.h file. + + (#) Three mode of operations are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_I2S_Transmit() + (+) Receive an amount of data in blocking mode using HAL_I2S_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA() + (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback + (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_TxCpltCallback + (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA() + (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback + (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can + add his own code by customization of function pointer HAL_I2S_RxCpltCallback + (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_I2S_ErrorCallback + (+) Pause the DMA Transfer using HAL_I2S_DMAPause() + (+) Resume the DMA Transfer using HAL_I2S_DMAResume() + (+) Stop the DMA Transfer using HAL_I2S_DMAStop() + In Slave mode, if HAL_I2S_DMAStop is used to stop the communication, an error + HAL_I2S_ERROR_BUSY_LINE_RX is raised as the master continue to transmit data. + In this case __HAL_I2S_FLUSH_RX_DR macro must be used to flush the remaining data + inside DR register and avoid using DeInit/Init process for the next transfer. + + *** I2S HAL driver macros list *** + =================================== + [..] + Below the list of most used macros in I2S HAL driver. + + (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode) + (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts + (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts + (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not + (+) __HAL_I2S_FLUSH_RX_DR: Read DR Register to Flush RX Data + + [..] + (@) You can refer to the I2S HAL driver header file for more useful macros + + *** I2S HAL driver macros list *** + =================================== + [..] + Callback registration: + + (#) The compilation flag USE_HAL_I2S_REGISTER_CALLBACKS when set to 1U + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_I2S_RegisterCallback() to register an interrupt callback. + + Function HAL_I2S_RegisterCallback() allows to register following callbacks: + (++) TxCpltCallback : I2S Tx Completed callback + (++) RxCpltCallback : I2S Rx Completed callback + (++) TxHalfCpltCallback : I2S Tx Half Completed callback + (++) RxHalfCpltCallback : I2S Rx Half Completed callback + (++) ErrorCallback : I2S Error callback + (++) MspInitCallback : I2S Msp Init callback + (++) MspDeInitCallback : I2S Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_I2S_UnRegisterCallback to reset a callback to the default + weak function. + HAL_I2S_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (++) TxCpltCallback : I2S Tx Completed callback + (++) RxCpltCallback : I2S Rx Completed callback + (++) TxHalfCpltCallback : I2S Tx Half Completed callback + (++) RxHalfCpltCallback : I2S Rx Half Completed callback + (++) ErrorCallback : I2S Error callback + (++) MspInitCallback : I2S Msp Init callback + (++) MspDeInitCallback : I2S Msp DeInit callback + + [..] + By default, after the HAL_I2S_Init() and when the state is HAL_I2S_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_I2S_MasterTxCpltCallback(), HAL_I2S_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_I2S_Init()/ HAL_I2S_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_I2S_Init()/ HAL_I2S_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + [..] + Callbacks can be registered/unregistered in HAL_I2S_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2S_STATE_READY or HAL_I2S_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_I2S_RegisterCallback() before calling HAL_I2S_DeInit() + or HAL_I2S_Init() function. + + [..] + When the compilation define USE_HAL_I2S_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + @endverbatim + + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +#ifdef HAL_I2S_MODULE_ENABLED + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup I2S I2S + * @brief I2S HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define I2S_TIMEOUT_FLAG 100U /*!< Timeout 100 ms */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup I2S_Private_Functions I2S Private Functions + * @{ + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void I2S_DMAError(DMA_HandleTypeDef *hdma); +static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s); +static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s); +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, + uint32_t Timeout); +/** + * @} + */ + +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup I2S_Exported_Functions I2S Exported Functions + * @{ + */ + +/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the I2Sx peripheral in simplex mode: + + (+) User must Implement HAL_I2S_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_I2S_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Standard + (++) Data Format + (++) MCLK Output + (++) Audio frequency + (++) Polarity + + (+) Call the function HAL_I2S_DeInit() to restore the default configuration + of the selected I2Sx peripheral. + @endverbatim + * @{ + */ + +/** + * @brief Initializes the I2S according to the specified parameters + * in the I2S_InitTypeDef and create the associated handle. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s) +{ + uint32_t i2sdiv; + uint32_t i2sodd; + uint32_t packetlength; + uint32_t tmp; + uint32_t i2sclk; + + /* Check the I2S handle allocation */ + if (hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + assert_param(IS_I2S_MODE(hi2s->Init.Mode)); + assert_param(IS_I2S_STANDARD(hi2s->Init.Standard)); + assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat)); + assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput)); + assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq)); + assert_param(IS_I2S_CPOL(hi2s->Init.CPOL)); + + if (hi2s->State == HAL_I2S_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hi2s->Lock = HAL_UNLOCKED; + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + /* Init the I2S Callback settings */ + hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ + + if (hi2s->MspInitCallback == NULL) + { + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hi2s->MspInitCallback(hi2s); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + HAL_I2S_MspInit(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } + + hi2s->State = HAL_I2S_STATE_BUSY; + + /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + CLEAR_BIT(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \ + SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ + SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD)); + hi2s->Instance->I2SPR = 0x0002U; + + /*----------------------- I2SPR: I2SDIV and ODD Calculation -----------------*/ + /* If the requested audio frequency is not the default, compute the prescaler */ + if (hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT) + { + /* Check the frame length (For the Prescaler computing) ********************/ + if (hi2s->Init.DataFormat == I2S_DATAFORMAT_16B) + { + /* Packet length is 16 bits */ + packetlength = 16U; + } + else + { + /* Packet length is 32 bits */ + packetlength = 32U; + } + + /* I2S standard */ + if (hi2s->Init.Standard <= I2S_STANDARD_LSB) + { + /* In I2S standard packet length is multiplied by 2 */ + packetlength = packetlength * 2U; + } + + /* Get the source clock value: based on System Clock value */ + i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SPI3_I2S); + + /* Compute the Real divider depending on the MCLK output state, with a floating point */ + if (hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE) + { + /* MCLK output is enabled */ + if (hi2s->Init.DataFormat != I2S_DATAFORMAT_16B) + { + tmp = (uint32_t)(((((i2sclk / (packetlength * 4U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + else + { + tmp = (uint32_t)(((((i2sclk / (packetlength * 8U)) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + } + else + { + /* MCLK output is disabled */ + tmp = (uint32_t)(((((i2sclk / packetlength) * 10U) / hi2s->Init.AudioFreq)) + 5U); + } + + /* Remove the flatting point */ + tmp = tmp / 10U; + + /* Check the parity of the divider */ + i2sodd = (uint32_t)(tmp & (uint32_t)1U); + + /* Compute the i2sdiv prescaler */ + i2sdiv = (uint32_t)((tmp - i2sodd) / 2U); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (uint32_t)(i2sodd << 8U); + } + else + { + /* Set the default values */ + i2sdiv = 2U; + i2sodd = 0U; + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) + { + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_PRESCALER); + return HAL_ERROR; + } + + /*----------------------- SPIx I2SCFGR & I2SPR Configuration ----------------*/ + + /* Write to SPIx I2SPR register the computed value */ + hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput)); + + /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ + /* And configure the I2S with the I2S_InitStruct values */ + MODIFY_REG(hi2s->Instance->I2SCFGR, (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ + SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ + SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \ + SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD), \ + (SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | \ + hi2s->Init.Standard | hi2s->Init.DataFormat | \ + hi2s->Init.CPOL)); + +#if defined(SPI_I2SCFGR_ASTRTEN) + if ((hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT) || ((hi2s->Init.Standard == I2S_STANDARD_PCM_LONG))) + { + /* Write to SPIx I2SCFGR */ + SET_BIT(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_ASTRTEN); + } +#endif /* SPI_I2SCFGR_ASTRTEN */ + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the I2S peripheral + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s) +{ + /* Check the I2S handle allocation */ + if (hi2s == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance)); + + hi2s->State = HAL_I2S_STATE_BUSY; + + /* Disable the I2S Peripheral Clock */ + __HAL_I2S_DISABLE(hi2s); + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + if (hi2s->MspDeInitCallback == NULL) + { + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hi2s->MspDeInitCallback(hi2s); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_I2S_MspDeInit(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->State = HAL_I2S_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief I2S MSP Init + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspInit could be implemented in the user file + */ +} + +/** + * @brief I2S MSP DeInit + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_MspDeInit could be implemented in the user file + */ +} + +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User I2S Callback + * To be used instead of the weak predefined callback + * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for the specified I2S. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, + pI2S_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hi2s->ErrorCode |= HAL_I2S_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hi2s); + + if (HAL_I2S_STATE_READY == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_TX_COMPLETE_CB_ID : + hi2s->TxCpltCallback = pCallback; + break; + + case HAL_I2S_RX_COMPLETE_CB_ID : + hi2s->RxCpltCallback = pCallback; + break; + + case HAL_I2S_TX_HALF_COMPLETE_CB_ID : + hi2s->TxHalfCpltCallback = pCallback; + break; + + case HAL_I2S_RX_HALF_COMPLETE_CB_ID : + hi2s->RxHalfCpltCallback = pCallback; + break; + + case HAL_I2S_ERROR_CB_ID : + hi2s->ErrorCallback = pCallback; + break; + + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = pCallback; + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2S_STATE_RESET == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = pCallback; + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + return status; +} + +/** + * @brief Unregister an I2S Callback + * I2S callback is redirected to the weak predefined callback + * @param hi2s Pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for the specified I2S. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hi2s); + + if (HAL_I2S_STATE_READY == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_TX_COMPLETE_CB_ID : + hi2s->TxCpltCallback = HAL_I2S_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_I2S_RX_COMPLETE_CB_ID : + hi2s->RxCpltCallback = HAL_I2S_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_I2S_TX_HALF_COMPLETE_CB_ID : + hi2s->TxHalfCpltCallback = HAL_I2S_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_I2S_RX_HALF_COMPLETE_CB_ID : + hi2s->RxHalfCpltCallback = HAL_I2S_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_I2S_ERROR_CB_ID : + hi2s->ErrorCallback = HAL_I2S_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_I2S_STATE_RESET == hi2s->State) + { + switch (CallbackID) + { + case HAL_I2S_MSPINIT_CB_ID : + hi2s->MspInitCallback = HAL_I2S_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_I2S_MSPDEINIT_CB_ID : + hi2s->MspDeInitCallback = HAL_I2S_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hi2s); + return status; +} +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the I2S data + transfers. + + (#) There are two modes of transfer: + (++) Blocking mode : The communication is performed in the polling mode. + The status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode : The communication is performed using Interrupts + or DMA. These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + + (#) Blocking mode functions are : + (++) HAL_I2S_Transmit() + (++) HAL_I2S_Receive() + + (#) No-Blocking mode functions with Interrupt are : + (++) HAL_I2S_Transmit_IT() + (++) HAL_I2S_Receive_IT() + + (#) No-Blocking mode functions with DMA are : + (++) HAL_I2S_Transmit_DMA() + (++) HAL_I2S_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (++) HAL_I2S_TxCpltCallback() + (++) HAL_I2S_RxCpltCallback() + (++) HAL_I2S_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + tmpreg_cfgr = hi2s->Instance->I2SCFGR; + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + while (hi2s->TxXferCount > 0U) + { + hi2s->Instance->DR = (*hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr++; + hi2s->TxXferCount--; + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + /* Check if an underrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) + { + /* Clear underrun flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + } + + /* Check if Slave mode is selected */ + if (((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) + || ((tmpreg_cfgr & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX)) + { + /* Wait until Busy flag is reset */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, RESET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @param Timeout Timeout duration + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate + * in continuous way and as the I2S is not disabled at the end of the I2S transaction. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Check if Master Receiver mode is selected */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + + /* Receive data */ + while (hi2s->RxXferCount > 0U) + { + /* Wait until RXNE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; + hi2s->pRxBuffPtr++; + hi2s->RxXferCount--; + + /* Check if an overrun occurs */ + if (__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) + { + /* Clear overrun flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + } + + hi2s->State = HAL_I2S_STATE_READY; + __HAL_UNLOCK(hi2s); + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + __HAL_UNLOCK(hi2s); + + /* Enable TXE and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronization + * between Master and Slave otherwise the I2S interrupt should be optimized. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + __HAL_UNLOCK(hi2s); + + /* Enable RXNE and ERR interrupt */ + __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Check if the I2S is already enabled */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Transmit data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_TX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pTxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->TxXferSize = (Size << 1U); + hi2s->TxXferCount = (Size << 1U); + } + else + { + hi2s->TxXferSize = Size; + hi2s->TxXferCount = Size; + } + + /* Set the I2S Tx DMA Half transfer complete callback */ + hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt; + + /* Set the I2S Tx DMA transfer complete callback */ + hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt; + + /* Set the DMA error callback */ + hi2s->hdmatx->XferErrorCallback = I2S_DMAError; + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmatx, + (uint32_t)hi2s->pTxBuffPtr, + (uint32_t)&hi2s->Instance->DR, + hi2s->TxXferSize)) + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + __HAL_UNLOCK(hi2s); + + /* Check if the I2S Tx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Enable Tx DMA Request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param pData a 16-bit pointer to the Receive data buffer. + * @param Size number of data sample to be sent: + * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S + * configuration phase, the Size parameter means the number of 16-bit data length + * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected + * the Size parameter means the number of 24-bit or 32-bit data length. + * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization + * between Master and Slave(example: audio streaming). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size) +{ + uint32_t tmpreg_cfgr; + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hi2s->State != HAL_I2S_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hi2s); + + /* Set state and reset error code */ + hi2s->State = HAL_I2S_STATE_BUSY_RX; + hi2s->ErrorCode = HAL_I2S_ERROR_NONE; + hi2s->pRxBuffPtr = pData; + + tmpreg_cfgr = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN); + + if ((tmpreg_cfgr == I2S_DATAFORMAT_24B) || (tmpreg_cfgr == I2S_DATAFORMAT_32B)) + { + hi2s->RxXferSize = (Size << 1U); + hi2s->RxXferCount = (Size << 1U); + } + else + { + hi2s->RxXferSize = Size; + hi2s->RxXferCount = Size; + } + + /* Set the I2S Rx DMA Half transfer complete callback */ + hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt; + + /* Set the I2S Rx DMA transfer complete callback */ + hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt; + + /* Set the DMA error callback */ + hi2s->hdmarx->XferErrorCallback = I2S_DMAError; + + /* Check if Master Receiver mode is selected */ + if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX) + { + /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read + access to the SPI_SR register. */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + } + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, (uint32_t)hi2s->pRxBuffPtr, + hi2s->RxXferSize)) + { + /* Update SPI error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + hi2s->State = HAL_I2S_STATE_READY; + + __HAL_UNLOCK(hi2s); + return HAL_ERROR; + } + + __HAL_UNLOCK(hi2s); + + /* Check if the I2S Rx request is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Enable Rx DMA Request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + + /* Check if the I2S is already enabled */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + return HAL_OK; +} + +/** + * @brief Pauses the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* Disable the I2S DMA Tx request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* Disable the I2S DMA Rx request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + else + { + /* nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Resumes the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s) +{ + /* Process Locked */ + __HAL_LOCK(hi2s); + + if (hi2s->State == HAL_I2S_STATE_BUSY_TX) + { + /* Enable the I2S DMA Tx request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + } + else if (hi2s->State == HAL_I2S_STATE_BUSY_RX) + { + /* Enable the I2S DMA Rx request */ + SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + } + else + { + /* nothing to do */ + } + + /* If the I2S peripheral is still not enabled, enable it */ + if (HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) + { + /* Enable I2S peripheral */ + __HAL_I2S_ENABLE(hi2s); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_OK; +} + +/** + * @brief Stops the audio DMA Stream/Channel playing from the Media. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL status + */ +HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() + when calling HAL_DMA_Abort() API the DMA TX or RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_I2S_TxCpltCallback() or HAL_I2S_RxCpltCallback() + */ + + if ((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX)) + { + /* Abort the I2S DMA tx Stream/Channel */ + if (hi2s->hdmatx != NULL) + { + /* Disable the I2S DMA tx Stream/Channel */ + if (HAL_OK != HAL_DMA_Abort(hi2s->hdmatx)) + { + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Wait until TXE flag is set */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, I2S_TIMEOUT_FLAG) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + } + + /* Wait until BSY flag is Reset */ + if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, RESET, I2S_TIMEOUT_FLAG) != HAL_OK) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_TIMEOUT); + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + } + + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + + /* Clear UDR flag */ + __HAL_I2S_CLEAR_UDRFLAG(hi2s); + + /* Disable the I2S Tx DMA requests */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + + } + + else if ((hi2s->Init.Mode == I2S_MODE_MASTER_RX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_RX)) + { + /* Abort the I2S DMA rx Stream/Channel */ + if (hi2s->hdmarx != NULL) + { + /* Disable the I2S DMA rx Stream/Channel */ + if (HAL_OK != HAL_DMA_Abort(hi2s->hdmarx)) + { + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable I2S peripheral */ + __HAL_I2S_DISABLE(hi2s); + + /* Clear OVR flag */ + __HAL_I2S_CLEAR_OVRFLAG(hi2s); + + /* Disable the I2S Rx DMA request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + + if (hi2s->Init.Mode == I2S_MODE_SLAVE_RX) + { + /* Set the error code */ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_BUSY_LINE_RX); + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + errorcode = HAL_ERROR; + } + else + { + /* Read DR to Flush RX Data */ + READ_REG((hi2s->Instance)->DR); + } + } + + hi2s->State = HAL_I2S_STATE_READY; + + return errorcode; +} + +/** + * @brief This function handles I2S interrupt request. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s) +{ + uint32_t itsource = hi2s->Instance->CR2; + uint32_t itflag = hi2s->Instance->SR; + + /* I2S in mode Receiver ------------------------------------------------*/ + if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) == RESET) && + (I2S_CHECK_FLAG(itflag, I2S_FLAG_RXNE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_RXNE) != RESET)) + { + I2S_Receive_IT(hi2s); + return; + } + + /* I2S in mode Tramitter -----------------------------------------------*/ + if ((I2S_CHECK_FLAG(itflag, I2S_FLAG_TXE) != RESET) && (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_TXE) != RESET)) + { + I2S_Transmit_IT(hi2s); + return; + } + + /* I2S interrupt error -------------------------------------------------*/ + if (I2S_CHECK_IT_SOURCE(itsource, I2S_IT_ERR) != RESET) + { + /* I2S Overrun error interrupt occurred ---------------------------------*/ + if (I2S_CHECK_FLAG(itflag, I2S_FLAG_OVR) != RESET) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_OVR); + } + + /* I2S Underrun error interrupt occurred --------------------------------*/ + if (I2S_CHECK_FLAG(itflag, I2S_FLAG_UDR) != RESET) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_UDR); + } + + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Tx Transfer Half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Tx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer half completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief I2S error callbacks + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +__weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hi2s); + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_I2S_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the I2S state + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval HAL state + */ +HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s) +{ + return hi2s->State; +} + +/** + * @brief Return the I2S error code + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval I2S Error Code + */ +uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s) +{ + return hi2s->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2S_Private_Functions I2S Private Functions + * @{ + */ +/** + * @brief DMA I2S transmit process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN); + + hi2s->TxXferCount = 0U; + hi2s->State = HAL_I2S_STATE_READY; + } + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S transmit process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Tx half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxHalfCpltCallback(hi2s); +#else + HAL_I2S_TxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* if DMA is configured in DMA_NORMAL Mode */ + if (hdma->Init.Mode == DMA_NORMAL) + { + /* Disable Rx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN); + hi2s->RxXferCount = 0U; + hi2s->State = HAL_I2S_STATE_READY; + } + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxCpltCallback(hi2s); +#else + HAL_I2S_RxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S receive process half complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Rx half complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxHalfCpltCallback(hi2s); +#else + HAL_I2S_RxHalfCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA I2S communication error callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void I2S_DMAError(DMA_HandleTypeDef *hdma) +{ + I2S_HandleTypeDef *hi2s = (I2S_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable Rx and Tx DMA Request */ + CLEAR_BIT(hi2s->Instance->CR2, (SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN)); + hi2s->TxXferCount = 0U; + hi2s->RxXferCount = 0U; + + hi2s->State = HAL_I2S_STATE_READY; + + /* Set the error code and execute error callback*/ + SET_BIT(hi2s->ErrorCode, HAL_I2S_ERROR_DMA); + /* Call user error callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->ErrorCallback(hi2s); +#else + HAL_I2S_ErrorCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s) +{ + /* Transmit data */ + hi2s->Instance->DR = (*hi2s->pTxBuffPtr); + hi2s->pTxBuffPtr++; + hi2s->TxXferCount--; + + if (hi2s->TxXferCount == 0U) + { + /* Disable TXE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR)); + + hi2s->State = HAL_I2S_STATE_READY; + /* Call user Tx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->TxCpltCallback(hi2s); +#else + HAL_I2S_TxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @retval None + */ +static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s) +{ + /* Receive data */ + (*hi2s->pRxBuffPtr) = (uint16_t)hi2s->Instance->DR; + hi2s->pRxBuffPtr++; + hi2s->RxXferCount--; + + if (hi2s->RxXferCount == 0U) + { + /* Disable RXNE and ERR interrupt */ + __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR)); + + hi2s->State = HAL_I2S_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) + hi2s->RxCpltCallback(hi2s); +#else + HAL_I2S_RxCpltCallback(hi2s); +#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ + } +} + +/** + * @brief This function handles I2S Communication Timeout. + * @param hi2s pointer to a I2S_HandleTypeDef structure that contains + * the configuration information for I2S module + * @param Flag Flag checked + * @param State Value of the flag expected + * @param Timeout Duration of the timeout + * @retval HAL status + */ +static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, FlagStatus State, + uint32_t Timeout) +{ + uint32_t tickstart; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until flag is set to status*/ + while (((__HAL_I2S_GET_FLAG(hi2s, Flag)) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) >= Timeout) || (Timeout == 0U)) + { + /* Set the I2S State ready */ + hi2s->State = HAL_I2S_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hi2s); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_I2S_MODULE_ENABLED */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_irda.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_irda.c new file mode 100644 index 0000000000..adcd6439ac --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_irda.c @@ -0,0 +1,3008 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_irda.c + * @author MCD Application Team + * @brief IRDA HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the IrDA (Infrared Data Association) Peripheral + * (IRDA) + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The IRDA HAL driver can be used as follows: + + (#) Declare a IRDA_HandleTypeDef handle structure (eg. IRDA_HandleTypeDef hirda). + (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API + in setting the associated USART or UART in IRDA mode: + (++) Enable the USARTx/UARTx interface clock. + (++) USARTx/UARTx pins configuration: + (+++) Enable the clock for the USARTx/UARTx GPIOs. + (+++) Configure these USARTx/UARTx pins (TX as alternate function pull-up, RX as alternate function Input). + (++) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT() + and HAL_IRDA_Receive_IT() APIs): + (+++) Configure the USARTx/UARTx interrupt priority. + (+++) Enable the NVIC USARTx/UARTx IRQ handle. + (+++) The specific IRDA interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. + + (++) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA() + and HAL_IRDA_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer + complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length and Parity and Mode(Receiver/Transmitter), + the normal or low power mode and the clock prescaler in the hirda handle Init structure. + + (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_IRDA_MspInit() API. + + -@@- The specific IRDA interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process. + + (#) Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit() + (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_IRDA_Transmit_IT() + (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_IRDA_Receive_IT() + (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxCpltCallback() + (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_IRDA_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_IRDA_Transmit_DMA() + (+) At transmission half of transfer HAL_IRDA_TxHalfCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxHalfCpltCallback() + (+) At transmission end of transfer HAL_IRDA_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_IRDA_Receive_DMA() + (+) At reception half of transfer HAL_IRDA_RxHalfCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxHalfCpltCallback() + (+) At reception end of transfer HAL_IRDA_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_IRDA_RxCpltCallback() + (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_IRDA_ErrorCallback() + + *** IRDA HAL driver macros list *** + ==================================== + [..] + Below the list of most used macros in IRDA HAL driver. + + (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral + (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral + (+) __HAL_IRDA_GET_FLAG : Check whether the specified IRDA flag is set or not + (+) __HAL_IRDA_CLEAR_FLAG : Clear the specified IRDA pending flag + (+) __HAL_IRDA_ENABLE_IT: Enable the specified IRDA interrupt + (+) __HAL_IRDA_DISABLE_IT: Disable the specified IRDA interrupt + (+) __HAL_IRDA_GET_IT_SOURCE: Check whether or not the specified IRDA interrupt is enabled + + [..] + (@) You can refer to the IRDA HAL driver header file for more useful macros + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_IRDA_RegisterCallback() to register a user callback. + Function HAL_IRDA_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : IRDA MspInit. + (+) MspDeInitCallback : IRDA MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_IRDA_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_IRDA_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) MspInitCallback : IRDA MspInit. + (+) MspDeInitCallback : IRDA MspDeInit. + + [..] + By default, after the HAL_IRDA_Init() and when the state is HAL_IRDA_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_IRDA_Init() + and HAL_IRDA_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_IRDA_Init() and HAL_IRDA_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_IRDA_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_IRDA_STATE_READY or HAL_IRDA_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_IRDA_RegisterCallback() before calling HAL_IRDA_DeInit() + or HAL_IRDA_Init() function. + + [..] + When The compilation define USE_HAL_IRDA_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup IRDA IRDA + * @brief HAL IRDA module driver + * @{ + */ + +#ifdef HAL_IRDA_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup IRDA_Private_Constants IRDA Private Constants + * @{ + */ +#define IRDA_TEACK_REACK_TIMEOUT 1000U /*!< IRDA TX or RX enable acknowledge time-out value */ + +#define IRDA_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE \ + | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE)) /*!< UART or USART CR1 fields of parameters set by IRDA_SetConfig API */ + +#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ + +#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup IRDA_Private_Macros IRDA Private Macros + * @{ + */ +/** @brief BRR division operation to set BRR register in 16-bit oversampling mode. + * @param __PCLK__ IRDA clock source. + * @param __BAUD__ Baud rate set by the user. + * @param __PRESCALER__ IRDA clock prescaler value. + * @retval Division result + */ +#define IRDA_DIV_SAMPLING16(__PCLK__, __BAUD__, __PRESCALER__) ((((__PCLK__)/IRDAPrescTable[(__PRESCALER__)])\ + + ((__BAUD__)/2U)) / (__BAUD__)) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup IRDA_Private_Functions + * @{ + */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +void IRDA_InitCallbacksToDefault(IRDA_HandleTypeDef *hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda); +static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda); +static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +#if defined(HAL_DMA_MODULE_ENABLED) +static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda); +#endif /* HAL_DMA_MODULE_ENABLED */ +static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda); +#if defined(HAL_DMA_MODULE_ENABLED) +static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma); +static void IRDA_DMAError(DMA_HandleTypeDef *hdma); +static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +#endif /* HAL_DMA_MODULE_ENABLED */ +static void IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda); +static void IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda); +static void IRDA_Receive_IT(IRDA_HandleTypeDef *hirda); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @defgroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx + in asynchronous IRDA mode. + (+) For the asynchronous mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Power mode + (++) Prescaler setting + (++) Receiver/transmitter modes + + [..] + The HAL_IRDA_Init() API follows the USART asynchronous configuration procedures + (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible IRDA frame formats are listed in the + following table. + + Table 1. IRDA frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | IRDA frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the IRDA mode according to the specified + * parameters in the IRDA_InitTypeDef and initialize the associated handle. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda) +{ + /* Check the IRDA handle allocation */ + if (hirda == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the IRDA handle */ + assert_param(IS_IRDA_INSTANCE(hirda->Instance)); + + if (hirda->gState == HAL_IRDA_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hirda->Lock = HAL_UNLOCKED; + +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 + IRDA_InitCallbacksToDefault(hirda); + + if (hirda->MspInitCallback == NULL) + { + hirda->MspInitCallback = HAL_IRDA_MspInit; + } + + /* Init the low level hardware */ + hirda->MspInitCallback(hirda); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_IRDA_MspInit(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + } + + hirda->gState = HAL_IRDA_STATE_BUSY; + + /* Disable the Peripheral to update the configuration registers */ + __HAL_IRDA_DISABLE(hirda); + + /* Set the IRDA Communication parameters */ + if (IRDA_SetConfig(hirda) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In IRDA mode, the following bits must be kept cleared: + - LINEN, STOP and CLKEN bits in the USART_CR2 register, + - SCEN and HDSEL bits in the USART_CR3 register.*/ + CLEAR_BIT(hirda->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP)); + CLEAR_BIT(hirda->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL)); + + /* set the UART/USART in IRDA mode */ + hirda->Instance->CR3 |= USART_CR3_IREN; + + /* Enable the Peripheral */ + __HAL_IRDA_ENABLE(hirda); + + /* TEACK and/or REACK to check before moving hirda->gState and hirda->RxState to Ready */ + return (IRDA_CheckIdleState(hirda)); +} + +/** + * @brief DeInitialize the IRDA peripheral. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda) +{ + /* Check the IRDA handle allocation */ + if (hirda == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the IRDA handle */ + assert_param(IS_IRDA_INSTANCE(hirda->Instance)); + + hirda->gState = HAL_IRDA_STATE_BUSY; + + /* DeInit the low level hardware */ +#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 + if (hirda->MspDeInitCallback == NULL) + { + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; + } + /* DeInit the low level hardware */ + hirda->MspDeInitCallback(hirda); +#else + HAL_IRDA_MspDeInit(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + /* Disable the Peripheral */ + __HAL_IRDA_DISABLE(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_RESET; + hirda->RxState = HAL_IRDA_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Initialize the IRDA MSP. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the IRDA MSP. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_IRDA_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User IRDA Callback + * To be used to override the weak predefined callback + * @note The HAL_IRDA_RegisterCallback() may be called before HAL_IRDA_Init() in HAL_IRDA_STATE_RESET + * to register callbacks for HAL_IRDA_MSPINIT_CB_ID and HAL_IRDA_MSPDEINIT_CB_ID + * @param hirda irda handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_IRDA_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_IRDA_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_IRDA_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_IRDA_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_IRDA_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_IRDA_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_IRDA_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_IRDA_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, + pIRDA_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (hirda->gState == HAL_IRDA_STATE_READY) + { + switch (CallbackID) + { + case HAL_IRDA_TX_HALFCOMPLETE_CB_ID : + hirda->TxHalfCpltCallback = pCallback; + break; + + case HAL_IRDA_TX_COMPLETE_CB_ID : + hirda->TxCpltCallback = pCallback; + break; + + case HAL_IRDA_RX_HALFCOMPLETE_CB_ID : + hirda->RxHalfCpltCallback = pCallback; + break; + + case HAL_IRDA_RX_COMPLETE_CB_ID : + hirda->RxCpltCallback = pCallback; + break; + + case HAL_IRDA_ERROR_CB_ID : + hirda->ErrorCallback = pCallback; + break; + + case HAL_IRDA_ABORT_COMPLETE_CB_ID : + hirda->AbortCpltCallback = pCallback; + break; + + case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID : + hirda->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID : + hirda->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = pCallback; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hirda->gState == HAL_IRDA_STATE_RESET) + { + switch (CallbackID) + { + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = pCallback; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an IRDA callback + * IRDA callback is redirected to the weak predefined callback + * @note The HAL_IRDA_UnRegisterCallback() may be called before HAL_IRDA_Init() in HAL_IRDA_STATE_RESET + * to un-register callbacks for HAL_IRDA_MSPINIT_CB_ID and HAL_IRDA_MSPDEINIT_CB_ID + * @param hirda irda handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_IRDA_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_IRDA_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_IRDA_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_IRDA_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_IRDA_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_IRDA_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_IRDA_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_IRDA_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_IRDA_STATE_READY == hirda->gState) + { + switch (CallbackID) + { + case HAL_IRDA_TX_HALFCOMPLETE_CB_ID : + hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_IRDA_TX_COMPLETE_CB_ID : + hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_IRDA_RX_HALFCOMPLETE_CB_ID : + hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_IRDA_RX_COMPLETE_CB_ID : + hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_IRDA_ERROR_CB_ID : + hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_IRDA_ABORT_COMPLETE_CB_ID : + hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID : + hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID : + hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = HAL_IRDA_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_IRDA_STATE_RESET == hirda->gState) + { + switch (CallbackID) + { + case HAL_IRDA_MSPINIT_CB_ID : + hirda->MspInitCallback = HAL_IRDA_MspInit; + break; + + case HAL_IRDA_MSPDEINIT_CB_ID : + hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; + break; + + default : + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hirda->ErrorCode |= HAL_IRDA_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions + * @brief IRDA Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the IRDA data transfers. + + [..] + IrDA is a half duplex communication protocol. If the Transmitter is busy, any data + on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver + is busy, data on the TX from the USART to IrDA will not be encoded by IrDA. + While receiving data, transmission should be avoided as the data to be transmitted + could be corrupted. + + [..] + (#) There are two modes of transfer: + (++) Blocking mode: the communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) Non-Blocking mode: the communication is performed using Interrupts + or DMA, these API's return the HAL status. + The end of the data processing will be indicated through the + dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks + will be executed respectively at the end of the Transmit or Receive process + The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected + + (#) Blocking mode APIs are : + (++) HAL_IRDA_Transmit() + (++) HAL_IRDA_Receive() + + (#) Non Blocking mode APIs with Interrupt are : + (++) HAL_IRDA_Transmit_IT() + (++) HAL_IRDA_Receive_IT() + (++) HAL_IRDA_IRQHandler() + + (#) Non Blocking mode functions with DMA are : + (++) HAL_IRDA_Transmit_DMA() + (++) HAL_IRDA_Receive_DMA() + (++) HAL_IRDA_DMAPause() + (++) HAL_IRDA_DMAResume() + (++) HAL_IRDA_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non Blocking mode: + (++) HAL_IRDA_TxHalfCpltCallback() + (++) HAL_IRDA_TxCpltCallback() + (++) HAL_IRDA_RxHalfCpltCallback() + (++) HAL_IRDA_RxCpltCallback() + (++) HAL_IRDA_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_IRDA_Abort() + (++) HAL_IRDA_AbortTransmit() + (++) HAL_IRDA_AbortReceive() + (++) HAL_IRDA_Abort_IT() + (++) HAL_IRDA_AbortTransmit_IT() + (++) HAL_IRDA_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_IRDA_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (++) HAL_IRDA_AbortCpltCallback() + (++) HAL_IRDA_AbortTransmitCpltCallback() + (++) HAL_IRDA_AbortReceiveCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed. + Transfer is kept ongoing on IRDA side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and + HAL_IRDA_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Specify timeout value. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; /* Derogation R.11.3 */ + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (hirda->TxXferCount > 0U) + { + hirda->TxXferCount--; + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + hirda->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + hirda->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + } + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Specify timeout value. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hirda->RxXferSize = Size; + hirda->RxXferCount = Size; + + /* Computation of the mask to apply to RDR register + of the UART associated to the IRDA */ + IRDA_MASK_COMPUTATION(hirda); + uhMask = hirda->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; /* Derogation R.11.3 */ + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Check data remaining to be received */ + while (hirda->RxXferCount > 0U) + { + hirda->RxXferCount--; + + if (IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(hirda->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(hirda->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + } + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pTxBuffPtr = pData; + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the IRDA Transmit Data Register Empty Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pRxBuffPtr = pData; + hirda->RxXferSize = Size; + hirda->RxXferCount = Size; + + /* Computation of the mask to apply to the RDR register + of the UART associated to the IRDA */ + IRDA_MASK_COMPUTATION(hirda); + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + if (hirda->Init.Parity != IRDA_PARITY_NONE) + { + /* Enable the IRDA Parity Error and Data Register not empty Interrupts */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + /* Enable the IRDA Data Register not empty Interrupts */ + SET_BIT(hirda->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + + /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hirda->gState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pTxBuffPtr = pData; + hirda->TxXferSize = Size; + hirda->TxXferCount = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->gState = HAL_IRDA_STATE_BUSY_TX; + + /* Set the IRDA DMA transfer complete callback */ + hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt; + + /* Set the IRDA DMA half transfer complete callback */ + hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt; + + /* Set the DMA error callback */ + hirda->hdmatx->XferErrorCallback = IRDA_DMAError; + + /* Set the DMA abort callback */ + hirda->hdmatx->XferAbortCallback = NULL; + + /* Enable the IRDA transmit DMA channel */ + if (HAL_DMA_Start_IT(hirda->hdmatx, (uint32_t)hirda->pTxBuffPtr, (uint32_t)&hirda->Instance->TDR, Size) == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_TCF); + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Restore hirda->gState to ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must reflect the number + * of u16 available through pData. + * @note When the IRDA parity is enabled (PCE = 1), the received data contains + * the parity bit (MSB position). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +/** + * @note When IRDA parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + */ +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(hirda); + + hirda->pRxBuffPtr = pData; + hirda->RxXferSize = Size; + + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + hirda->RxState = HAL_IRDA_STATE_BUSY_RX; + + /* Set the IRDA DMA transfer complete callback */ + hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt; + + /* Set the IRDA DMA half transfer complete callback */ + hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt; + + /* Set the DMA error callback */ + hirda->hdmarx->XferErrorCallback = IRDA_DMAError; + + /* Set the DMA abort callback */ + hirda->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->RDR, (uint32_t)hirda->pRxBuffPtr, Size) == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + if (hirda->Init.Parity != IRDA_PARITY_NONE) + { + /* Enable the UART Parity Error Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + /* Restore hirda->RxState to ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + + +/** + * @brief Pause the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda) +{ + /* Process Locked */ + __HAL_LOCK(hirda); + + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the IRDA DMA Tx request */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + } + } + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the IRDA DMA Rx request */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda) +{ + /* Process Locked */ + __HAL_LOCK(hirda); + + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + /* Enable the IRDA DMA Tx request */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + } + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_IRDA_CLEAR_OREFLAG(hirda); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (hirda->Init.Parity != IRDA_PARITY_NONE) + { + SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + } + SET_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Enable the IRDA DMA Rx request */ + SET_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL IRDA API under callbacks HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback() / + HAL_IRDA_TxHalfCpltCallback / HAL_IRDA_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + /* Stop IRDA DMA Tx request if ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel */ + if (hirda->hdmatx != NULL) + { + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + IRDA_EndTxTransfer(hirda); + } + } + + /* Stop IRDA DMA Rx request if ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel */ + if (hirda->hdmarx != NULL) + { + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + IRDA_EndRxTransfer(hirda); + } + } + + return HAL_OK; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | \ + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx and Rx transfer counters */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hirda->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hirda->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hirda->ErrorCode = HAL_IRDA_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda) +{ + uint32_t abortcplt = 1U; + + /* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | \ + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If DMA Tx and/or DMA Rx Handles are associated to IRDA Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hirda->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if IRDA DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + hirda->hdmatx->XferAbortCallback = IRDA_DMATxAbortCallback; + } + else + { + hirda->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hirda->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if IRDA DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + hirda->hdmarx->XferAbortCallback = IRDA_DMARxAbortCallback; + } + else + { + hirda->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmatx != NULL) + { + /* IRDA Tx DMA Abort callback has already been initialised : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK) + { + hirda->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmarx != NULL) + { + /* IRDA Rx DMA Abort callback has already been initialised : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + hirda->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Abort the IRDA DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmatx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + hirda->hdmatx->XferAbortCallback = IRDA_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hirda->hdmatx) != HAL_OK) + { + /* Call Directly hirda->hdmatx->XferAbortCallback function in case of error */ + hirda->hdmatx->XferAbortCallback(hirda->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Tx transfer counter */ + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable IRDA Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_AbortCpltCallback() at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = IRDA_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */ + hirda->hdmarx->XferAbortCallback(hirda->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Rx transfer counter */ + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Handle IRDA interrupt request. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda) +{ + uint32_t isrflags = READ_REG(hirda->Instance->ISR); + uint32_t cr1its = READ_REG(hirda->Instance->CR1); + uint32_t cr3its; + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE)); + if (errorflags == 0U) + { + /* IRDA in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) && ((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)) + { + IRDA_Receive_IT(hirda); + return; + } + } + + /* If some errors occur */ + cr3its = READ_REG(hirda->Instance->CR3); + if ((errorflags != 0U) + && (((cr3its & USART_CR3_EIE) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U))) + { + /* IRDA parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_PEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_PE; + } + + /* IRDA frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_FEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_FE; + } + + /* IRDA noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_NEF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_NE; + } + + /* IRDA Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) && + (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_OREF); + + hirda->ErrorCode |= HAL_IRDA_ERROR_ORE; + } + + /* Call IRDA Error Call back function if need be --------------------------*/ + if (hirda->ErrorCode != HAL_IRDA_ERROR_NONE) + { + /* IRDA in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) && ((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)) + { + IRDA_Receive_IT(hirda); + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + errorcode = hirda->ErrorCode; + if ((HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & HAL_IRDA_ERROR_ORE) != 0U)) + { + /* Blocking error : transfer is aborted + Set the IRDA state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + IRDA_EndRxTransfer(hirda); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the IRDA DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* Abort the IRDA DMA Rx channel */ + if (hirda->hdmarx != NULL) + { + /* Set the IRDA DMA Abort callback : + will lead to call HAL_IRDA_ErrorCallback() at end of DMA abort procedure */ + hirda->hdmarx->XferAbortCallback = IRDA_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hirda->hdmarx) != HAL_OK) + { + /* Call Directly hirda->hdmarx->XferAbortCallback function in case of error */ + hirda->hdmarx->XferAbortCallback(hirda->hdmarx); + } + } + else + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* IRDA in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) && ((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U)) + { + IRDA_Transmit_IT(hirda); + return; + } + + /* IRDA in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + IRDA_EndTransmit_IT(hirda); + return; + } + +} + +/** + * @brief Tx Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +__weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA error callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief IRDA Abort Receive Complete callback. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +__weak void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hirda); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_IRDA_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions + * @brief IRDA State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of IrDA + communication process and also return Peripheral Errors occurred during communication process + (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state + of the IRDA peripheral handle. + (+) HAL_IRDA_GetError() checks in run-time errors that could occur during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Return the IRDA handle state. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL state + */ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(const IRDA_HandleTypeDef *hirda) +{ + /* Return IRDA handle state */ + uint32_t temp1; + uint32_t temp2; + temp1 = (uint32_t)hirda->gState; + temp2 = (uint32_t)hirda->RxState; + + return (HAL_IRDA_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the IRDA handle error code. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval IRDA Error Code + */ +uint32_t HAL_IRDA_GetError(const IRDA_HandleTypeDef *hirda) +{ + return hirda->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup IRDA_Private_Functions IRDA Private Functions + * @{ + */ + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) +/** + * @brief Initialize the callbacks to their default values. + * @param hirda IRDA handle. + * @retval none + */ +void IRDA_InitCallbacksToDefault(IRDA_HandleTypeDef *hirda) +{ + /* Init the IRDA Callback settings */ + hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */ + hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + +} +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + +/** + * @brief Configure the IRDA peripheral. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_SetConfig(IRDA_HandleTypeDef *hirda) +{ + uint32_t tmpreg; + HAL_StatusTypeDef ret = HAL_OK; + static const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + + /* Check the communication parameters */ + assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate)); + assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength)); + assert_param(IS_IRDA_PARITY(hirda->Init.Parity)); + assert_param(IS_IRDA_TX_RX_MODE(hirda->Init.Mode)); + assert_param(IS_IRDA_PRESCALER(hirda->Init.Prescaler)); + assert_param(IS_IRDA_POWERMODE(hirda->Init.PowerMode)); + assert_param(IS_IRDA_CLOCKPRESCALER(hirda->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Configure the IRDA Word Length, Parity and transfer Mode: + Set the M bits according to hirda->Init.WordLength value + Set PCE and PS bits according to hirda->Init.Parity value + Set TE and RE bits according to hirda->Init.Mode value */ + tmpreg = (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode ; + + MODIFY_REG(hirda->Instance->CR1, IRDA_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.PowerMode); + + /*--------------------- USART clock PRESC Configuration ----------------*/ + /* Configure + * - IRDA Clock Prescaler: set PRESCALER according to hirda->Init.ClockPrescaler value */ + MODIFY_REG(hirda->Instance->PRESC, USART_PRESC_PRESCALER, hirda->Init.ClockPrescaler); + + /*-------------------------- USART GTPR Configuration ----------------------*/ + MODIFY_REG(hirda->Instance->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)hirda->Init.Prescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + tmpreg = (uint32_t)(IRDA_DIV_SAMPLING16(IRDA_PERIPHCLK, hirda->Init.BaudRate, hirda->Init.ClockPrescaler)); + + /* USARTDIV must be greater than or equal to 0d16 */ + if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) + { + hirda->Instance->BRR = (uint16_t)tmpreg; + } + else + { + ret = HAL_ERROR; + } + + return ret; +} + +/** + * @brief Check the IRDA Idle State. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda) +{ + uint32_t tickstart; + + /* Initialize the IRDA ErrorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((hirda->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_TEACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((hirda->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_REACK, RESET, tickstart, IRDA_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the IRDA state*/ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + + return HAL_OK; +} + +/** + * @brief Handle IRDA Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @param Flag Specifies the IRDA flag to check. + * @param Status The actual Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_IRDA_GET_FLAG(hirda, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hirda); + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief End ongoing Tx transfer on IRDA peripheral (following error detection or Transmit completion). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndTxTransfer(IRDA_HandleTypeDef *hirda) +{ + /* Disable TXEIE and TCIE interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + + /* At end of Tx process, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndRxTransfer(IRDA_HandleTypeDef *hirda) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; +} + + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA IRDA transmit process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + hirda->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the IRDA CR3 register */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAT); + + /* Enable the IRDA Transmit Complete Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hirda->TxCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ + } + +} + +/** + * @brief DMA IRDA transmit process half complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx Half complete callback */ + hirda->TxHalfCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxHalfCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA receive process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + hirda->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the IRDA CR3 register */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + } + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hirda->RxCpltCallback(hirda); +#else + /* Call legacy weak Rx complete callback */ + HAL_IRDA_RxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA IRDA receive process half complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + hirda->RxHalfCpltCallback(hirda); +#else + /* Call legacy weak Rx Half complete callback */ + HAL_IRDA_RxHalfCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA communication error callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void IRDA_DMAError(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + /* Stop IRDA DMA Tx request if ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAT)) + { + hirda->TxXferCount = 0U; + IRDA_EndTxTransfer(hirda); + } + } + + /* Stop IRDA DMA Rx request if ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hirda->Instance->CR3, USART_CR3_DMAR)) + { + hirda->RxXferCount = 0U; + IRDA_EndRxTransfer(hirda); + } + } + + hirda->ErrorCode |= HAL_IRDA_ERROR_DMA; +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + hirda->RxXferCount = 0U; + hirda->TxXferCount = 0U; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hirda->ErrorCallback(hirda); +#else + /* Call legacy weak user error callback */ + HAL_IRDA_ErrorCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hirda->hdmarx != NULL) + { + if (hirda->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA IRDA Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hirda->hdmatx != NULL) + { + if (hirda->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hirda->TxXferCount = 0U; + hirda->RxXferCount = 0U; + + /* Reset errorCode */ + hirda->ErrorCode = HAL_IRDA_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->gState and hirda->RxState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hirda->AbortCpltCallback(hirda); +#else + /* Call legacy weak Abort complete callback */ + HAL_IRDA_AbortCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA IRDA Tx communication abort callback, when initiated by user by a call to + * HAL_IRDA_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)(hdma->Parent); + + hirda->TxXferCount = 0U; + + /* Restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hirda->AbortTransmitCpltCallback(hirda); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_IRDA_AbortTransmitCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief DMA IRDA Rx communication abort callback, when initiated by user by a call to + * HAL_IRDA_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void IRDA_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + IRDA_HandleTypeDef *hirda = (IRDA_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + hirda->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_CLEAR_OREF | IRDA_CLEAR_NEF | IRDA_CLEAR_PEF | IRDA_CLEAR_FEF); + + /* Restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hirda->AbortReceiveCpltCallback(hirda); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_IRDA_AbortReceiveCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Send an amount of data in interrupt mode. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_IRDA_Transmit_IT(). + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (hirda->gState == HAL_IRDA_STATE_BUSY_TX) + { + if (hirda->TxXferCount == 0U) + { + /* Disable the IRDA Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the IRDA Transmit Complete Interrupt */ + SET_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + } + else + { + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + tmp = (const uint16_t *) hirda->pTxBuffPtr; /* Derogation R.11.3 */ + hirda->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + hirda->pTxBuffPtr += 2U; + } + else + { + hirda->Instance->TDR = (uint8_t)(*hirda->pTxBuffPtr & 0xFFU); + hirda->pTxBuffPtr++; + } + hirda->TxXferCount--; + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda) +{ + /* Disable the IRDA Transmit Complete Interrupt */ + CLEAR_BIT(hirda->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore hirda->gState to Ready */ + hirda->gState = HAL_IRDA_STATE_READY; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hirda->TxCpltCallback(hirda); +#else + /* Call legacy weak Tx complete callback */ + HAL_IRDA_TxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACK */ +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_IRDA_Receive_IT() + * @param hirda Pointer to a IRDA_HandleTypeDef structure that contains + * the configuration information for the specified IRDA module. + * @retval None + */ +static void IRDA_Receive_IT(IRDA_HandleTypeDef *hirda) +{ + uint16_t *tmp; + uint16_t uhMask = hirda->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (hirda->RxState == HAL_IRDA_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(hirda->Instance->RDR); + if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE)) + { + tmp = (uint16_t *) hirda->pRxBuffPtr; /* Derogation R.11.3 */ + *tmp = (uint16_t)(uhdata & uhMask); + hirda->pRxBuffPtr += 2U; + } + else + { + *hirda->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + hirda->pRxBuffPtr++; + } + + hirda->RxXferCount--; + if (hirda->RxXferCount == 0U) + { + /* Disable the IRDA Parity Error Interrupt and RXNE interrupt */ + CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore hirda->RxState to Ready */ + hirda->RxState = HAL_IRDA_STATE_READY; + +#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hirda->RxCpltCallback(hirda); +#else + /* Call legacy weak Rx complete callback */ + HAL_IRDA_RxCpltCallback(hirda); +#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_IRDA_SEND_REQ(hirda, IRDA_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_IRDA_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_iwdg.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_iwdg.c new file mode 100644 index 0000000000..c3f179dc77 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_iwdg.c @@ -0,0 +1,282 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_iwdg.c + * @author MCD Application Team + * @brief IWDG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Independent Watchdog (IWDG) peripheral: + * + Initialization and Start functions + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### IWDG Generic features ##### + ============================================================================== + [..] + (+) The IWDG can be started by either software or hardware (configurable + through option byte). + + (+) The IWDG is clocked by the Low-Speed Internal clock (LSI) and thus stays + active even if the main clock fails. + + (+) Once the IWDG is started, the LSI is forced ON and both cannot be + disabled. The counter starts counting down from the reset value (0xFFF). + When it reaches the end of count value (0x000) a reset signal is + generated (IWDG reset). + + (+) Whenever the key value 0x0000 AAAA is written in the IWDG_KR register, + the IWDG_RLR value is reloaded into the counter and the watchdog reset + is prevented. + + (+) The IWDG is implemented in the VDD voltage domain that is still functional + in STOP and STANDBY mode (IWDG reset can wake up the CPU from STANDBY). + IWDGRST flag in RCC_CSR register can be used to inform when an IWDG + reset occurs. + + (+) Debug mode: When the microcontroller enters debug mode (core halted), + the IWDG counter either continues to work normally or stops, depending + on DBG_IWDG_STOP configuration bit in DBG module, accessible through + __HAL_DBGMCU_FREEZE_IWDG() and __HAL_DBGMCU_UNFREEZE_IWDG() macros. + + [..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s + The IWDG timeout may vary due to LSI clock frequency dispersion. + STM32WL3x devices provide the capability to measure the LSI clock + frequency (LSI clock is internally connected to TIM16 CH1 input capture). + The measured value can be used to have an IWDG timeout with an + acceptable accuracy. + + [..] Default timeout value (necessary for IWDG_SR status register update): + Constant LSI_VALUE is defined based on the nominal LSI clock frequency. + This frequency being subject to variations as mentioned above, the + default timeout value (defined through constant HAL_IWDG_DEFAULT_TIMEOUT + below) may become too short or too long. + In such cases, this default timeout value can be tuned by redefining + the constant LSI_VALUE at user-application level (based, for instance, + on the measured LSI clock frequency as explained above). + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Use IWDG using HAL_IWDG_Init() function to : + (++) Enable instance by writing Start keyword in IWDG_KEY register. LSI + clock is forced ON and IWDG counter starts counting down. + (++) Enable write access to configuration registers: + IWDG_PR, IWDG_RLR and IWDG_WINR. + (++) Configure the IWDG prescaler and counter reload value. This reload + value will be loaded in the IWDG counter each time the watchdog is + reloaded, then the IWDG will start counting down from this value. + (++) Depending on window parameter: + (+++) If Window Init parameter is same as Window register value, + nothing more is done but reload counter value in order to exit + function with exact time base. + (+++) Else modify Window register. This will automatically reload + watchdog counter. + (++) Wait for status flags to be reset. + + (#) Then the application program must refresh the IWDG counter at regular + intervals during normal operation to prevent an MCU reset, using + HAL_IWDG_Refresh() function. + + *** IWDG HAL driver macros list *** + ==================================== + [..] + Below the list of most used macros in IWDG HAL driver: + (+) __HAL_IWDG_START: Enable the IWDG peripheral + (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in + the reload register + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +#ifdef HAL_IWDG_MODULE_ENABLED +/** @addtogroup IWDG + * @brief IWDG HAL module driver. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup IWDG_Private_Defines IWDG Private Defines + * @{ + */ +/* Status register needs up to 5 LSI clock periods divided by the clock + prescaler to be updated. The number of LSI clock periods is upper-rounded to + 6 for the timeout value calculation. + The timeout value is calculated using the highest prescaler (256) and + the LSI_VALUE constant. The value of this constant can be changed by the user + to take into account possible LSI clock period variations. + The timeout value is multiplied by 1000 to be converted in milliseconds. + LSI startup time is also considered here by adding LSI_STARTUP_TIME + converted in milliseconds. */ +#define HAL_IWDG_DEFAULT_TIMEOUT 48u +#define IWDG_KERNEL_UPDATE_FLAGS (IWDG_SR_WVU | IWDG_SR_RVU | IWDG_SR_PVU) +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup IWDG_Exported_Functions + * @{ + */ + +/** @addtogroup IWDG_Exported_Functions_Group1 + * @brief Initialization and Start functions. + * +@verbatim + =============================================================================== + ##### Initialization and Start functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the IWDG according to the specified parameters in the + IWDG_InitTypeDef of associated handle. + (+) Manage Window option. + (+) Once initialization is performed in HAL_IWDG_Init function, Watchdog + is reloaded in order to exit function with correct time base. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the IWDG according to the specified parameters in the + * IWDG_InitTypeDef and start watchdog. Before exiting function, + * watchdog is refreshed in order to have correct time base. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg) +{ + uint32_t tickstart; + + /* Check the IWDG handle allocation */ + if (hiwdg == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance)); + assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler)); + assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload)); + assert_param(IS_IWDG_WINDOW(hiwdg->Init.Window)); + + /* Enable IWDG. LSI is turned on automatically */ + __HAL_IWDG_START(hiwdg); + + /* Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers by writing + 0x5555 in KR */ + IWDG_ENABLE_WRITE_ACCESS(hiwdg); + + /* Write to IWDG registers the Prescaler & Reload values to work with */ + hiwdg->Instance->PR = hiwdg->Init.Prescaler; + hiwdg->Instance->RLR = hiwdg->Init.Reload; + + /* Check pending flag, if previous update not done, return timeout */ + tickstart = HAL_GetTick(); + + /* Wait for register to be updated */ + while ((hiwdg->Instance->SR & IWDG_KERNEL_UPDATE_FLAGS) != 0x00u) + { + if ((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT) + { + if ((hiwdg->Instance->SR & IWDG_KERNEL_UPDATE_FLAGS) != 0x00u) + { + return HAL_TIMEOUT; + } + } + } + + /* If window parameter is different than current value, modify window + register */ + if (hiwdg->Instance->WINR != hiwdg->Init.Window) + { + /* Write to IWDG WINR the IWDG_Window value to compare with. In any case, + even if window feature is disabled, Watchdog will be reloaded by writing + windows register */ + hiwdg->Instance->WINR = hiwdg->Init.Window; + } + else + { + /* Reload IWDG counter with value defined in the reload register */ + __HAL_IWDG_RELOAD_COUNTER(hiwdg); + } + + /* Return function status */ + return HAL_OK; +} + + +/** + * @} + */ + + +/** @addtogroup IWDG_Exported_Functions_Group2 + * @brief IO operation functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Refresh the IWDG. + +@endverbatim + * @{ + */ + +/** + * @brief Refresh the IWDG. + * @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains + * the configuration information for the specified IWDG module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg) +{ + /* Reload IWDG counter with value defined in the reload register */ + __HAL_IWDG_RELOAD_COUNTER(hiwdg); + + /* Return function status */ + return HAL_OK; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_IWDG_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_lcd.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_lcd.c new file mode 100644 index 0000000000..8ddeb6f010 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_lcd.c @@ -0,0 +1,641 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_lcd.c + * @author MCD Application Team + * @brief LCD Controller HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the LCD Controller (LCD) peripheral: + * + Initialization/de-initialization methods + * + I/O operation methods + * + Peripheral State methods + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] The LCD HAL driver can be used as follows: + + (#) Declare a LCD_HandleTypeDef handle structure. + + -@- The frequency generator allows you to achieve various LCD frame rates + starting from an LCD input clock frequency (LCDCLK) which can vary + from 32 kHz up to 1 MHz. + + (#) Initialize the LCD low level resources by implementing the HAL_LCD_MspInit() API: + + (++) Enable the LCDCLK (same as RTCCLK): to configure the RTCCLK/LCDCLK, proceed as follows: + (+++) Use RCC function HAL_RCCEx_PeriphCLKConfig in indicating RCC_PERIPHCLK_LCD and + selected clock source (HSE, LSI or LSE) + + (++) LCD pins configuration: + (+++) Enable the clock for the LCD GPIOs. + (+++) Configure these LCD pins as alternate function no-pull. + (++) Enable the LCD interface clock. + + + (#) Program the Prescaler, Divider, Blink mode, Blink Frequency Duty, Bias, + Voltage Source, Dead Time, Pulse On Duration, Contrast, High drive and Multiplexer + Segment in the Init structure of the LCD handle. + + (#) Initialize the LCD registers by calling the HAL_LCD_Init() API. + + -@- The HAL_LCD_Init() API configures also the low level Hardware GPIO, CLOCK, ...etc) + by calling the customized HAL_LCD_MspInit() API. + -@- After calling the HAL_LCD_Init() the LCD RAM memory is cleared + + (#) Optionally you can update the LCD configuration using these macros: + (++) LCD High Drive using the __HAL_LCD_HIGHDRIVER_ENABLE() and __HAL_LCD_HIGHDRIVER_DISABLE() macros + (++) Voltage output buffer using __HAL_LCD_VOLTAGE_BUFFER_ENABLE() and __HAL_LCD_VOLTAGE_BUFFER_DISABLE() macros + (++) LCD Pulse ON Duration using the __HAL_LCD_PULSEONDURATION_CONFIG() macro + (++) LCD Dead Time using the __HAL_LCD_DEADTIME_CONFIG() macro + (++) The LCD Blink mode and frequency using the __HAL_LCD_BLINK_CONFIG() macro + (++) The LCD Contrast using the __HAL_LCD_CONTRAST_CONFIG() macro + + (#) Write to the LCD RAM memory using the HAL_LCD_Write() API, this API can be called + more time to update the different LCD RAM registers before calling + HAL_LCD_UpdateDisplayRequest() API. + + (#) The HAL_LCD_Clear() API can be used to clear the LCD RAM memory. + + (#) When LCD RAM memory is updated enable the update display request using + the HAL_LCD_UpdateDisplayRequest() API. + + [..] LCD and low power modes: + (#) The LCD remain active during Sleep, Low Power run, Low Power Sleep and + STOP modes. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +#ifdef HAL_LCD_MODULE_ENABLED + +#if defined (LCD) + +/** @defgroup LCD LCD + * @brief LCD HAL module driver + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup LCD_Private_Defines LCD Private Defines + * @{ + */ + +#define LCD_TIMEOUT_VALUE 1000U + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup LCD_Exported_Functions LCD Exported Functions + * @{ + */ + +/** @defgroup LCD_Exported_Functions_Group1 Initialization/de-initialization methods + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the LCD peripheral according to the specified parameters + * in the LCD_InitStruct and initialize the associated handle. + * @note This function can be used only when the LCD is disabled. + * @param hlcd LCD handle + * @retval None + */ +HAL_StatusTypeDef HAL_LCD_Init(LCD_HandleTypeDef *hlcd) +{ + uint32_t tickstart; + HAL_StatusTypeDef status; + + /* Check the LCD handle allocation */ + if (hlcd == NULL) + { + return HAL_ERROR; + } + + /* Check function parameters */ + assert_param(IS_LCD_ALL_INSTANCE(hlcd->Instance)); + assert_param(IS_LCD_PRESCALER(hlcd->Init.Prescaler)); + assert_param(IS_LCD_DIVIDER(hlcd->Init.Divider)); + assert_param(IS_LCD_DUTY(hlcd->Init.Duty)); + assert_param(IS_LCD_BIAS(hlcd->Init.Bias)); + assert_param(IS_LCD_VOLTAGE_SOURCE(hlcd->Init.VoltageSource)); + assert_param(IS_LCD_PULSE_ON_DURATION(hlcd->Init.PulseOnDuration)); + assert_param(IS_LCD_HIGH_DRIVE(hlcd->Init.HighDrive)); + assert_param(IS_LCD_DEAD_TIME(hlcd->Init.DeadTime)); + assert_param(IS_LCD_CONTRAST(hlcd->Init.Contrast)); + assert_param(IS_LCD_BLINK_FREQUENCY(hlcd->Init.BlinkFrequency)); + assert_param(IS_LCD_BLINK_MODE(hlcd->Init.BlinkMode)); + + if (hlcd->State == HAL_LCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hlcd->Lock = HAL_UNLOCKED; + + /* Initialize the low level hardware (MSP) */ + HAL_LCD_MspInit(hlcd); + } + + hlcd->State = HAL_LCD_STATE_BUSY; + + /* Disable the peripheral */ + __HAL_LCD_DISABLE(hlcd); + + /* Clear the LCD_RAM registers and enable the display request by setting the UDR bit + in the LCD_SR register */ + hlcd->Instance->RAM_COM0 = 0; + hlcd->Instance->RAM_COM1 = 0; + hlcd->Instance->RAM_COM2 = 0; + hlcd->Instance->RAM_COM3 = 0; + hlcd->Instance->RAM_COM4 = 0; + hlcd->Instance->RAM_COM5 = 0; + hlcd->Instance->RAM_COM6 = 0; + hlcd->Instance->RAM_COM7 = 0; + /* Enable the display request */ + /* hlcd->Instance->SR |= LCD_SR_UDR */ + /* Configure the LCD Prescaler, Divider, Blink mode and Blink Frequency: + Set PS[3:0] bits according to hlcd->Init.Prescaler value + Set DIV[3:0] bits according to hlcd->Init.Divider value + Set BLINK[1:0] bits according to hlcd->Init.BlinkMode value + Set BLINKF[2:0] bits according to hlcd->Init.BlinkFrequency value + Set DEAD[2:0] bits according to hlcd->Init.DeadTime value + Set PON[2:0] bits according to hlcd->Init.PulseOnDuration value + Set CC[2:0] bits according to hlcd->Init.Contrast value + Set HD bit according to hlcd->Init.HighDrive value */ + MODIFY_REG(hlcd->Instance->FCR, \ + (LCD_FCR_PS | LCD_FCR_DIV | LCD_FCR_BLINK | LCD_FCR_BLINKF | \ + LCD_FCR_DEAD | LCD_FCR_PON | LCD_FCR_CC | LCD_FCR_HD), \ + (hlcd->Init.Prescaler | hlcd->Init.Divider | hlcd->Init.BlinkMode | hlcd->Init.BlinkFrequency | \ + hlcd->Init.DeadTime | hlcd->Init.PulseOnDuration | hlcd->Init.Contrast | hlcd->Init.HighDrive)); + + /* Wait until LCD Frame Control Register Synchronization flag (FCRSF) is set in the LCD_SR register + This bit is set by hardware each time the LCD_FCR register is updated in the LCDCLK + domain. It is cleared by hardware when writing to the LCD_FCR register.*/ + status = LCD_WaitForSynchro(hlcd); + if (status != HAL_OK) + { + return status; + } + + /* Configure the LCD Duty, Bias, Voltage Source, Dead Time, Pulse On Duration and Contrast: + Set DUTY[2:0] bits according to hlcd->Init.Duty value + Set BIAS[1:0] bits according to hlcd->Init.Bias value + Set VSEL bit according to hlcd->Init.VoltageSource value*/ + MODIFY_REG(hlcd->Instance->CR, \ + (LCD_CR_DUTY | LCD_CR_BIAS | LCD_CR_VSEL), \ + (hlcd->Init.Duty | hlcd->Init.Bias | hlcd->Init.VoltageSource)); + + /* Enable the peripheral */ + __HAL_LCD_ENABLE(hlcd); + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Wait Until the LCD is enabled */ + while (__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_ENS) == RESET) + { + if ((HAL_GetTick() - tickstart) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_ENS; + return HAL_TIMEOUT; + } + } + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /*!< Wait Until the LCD Booster is ready */ + while (__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_RDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_RDY; + return HAL_TIMEOUT; + } + } + + /* Initialize the LCD state */ + hlcd->ErrorCode = HAL_LCD_ERROR_NONE; + hlcd->State = HAL_LCD_STATE_READY; + + return status; +} + +/** + * @brief DeInitialize the LCD peripheral. + * @param hlcd LCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LCD_DeInit(LCD_HandleTypeDef *hlcd) +{ + /* Check the LCD handle allocation */ + if (hlcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_LCD_ALL_INSTANCE(hlcd->Instance)); + + hlcd->State = HAL_LCD_STATE_BUSY; + + /* DeInit the low level hardware */ + HAL_LCD_MspDeInit(hlcd); + + hlcd->ErrorCode = HAL_LCD_ERROR_NONE; + hlcd->State = HAL_LCD_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hlcd); + + return HAL_OK; +} + +/** + * @brief DeInitialize the LCD MSP. + * @param hlcd LCD handle + * @retval None + */ +__weak void HAL_LCD_MspDeInit(LCD_HandleTypeDef *hlcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlcd); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_LCD_MspDeInit it to be implemented in the user file + */ +} + +/** + * @brief Initialize the LCD MSP. + * @param hlcd LCD handle + * @retval None + */ +__weak void HAL_LCD_MspInit(LCD_HandleTypeDef *hlcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hlcd); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_LCD_MspInit is to be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup LCD_Exported_Functions_Group2 IO operation methods + * @brief LCD RAM functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] Using its double buffer memory the LCD controller ensures the coherency of the + displayed information without having to use interrupts to control LCD_RAM + modification. + + [..] The application software can access the first buffer level (LCD_RAM) through + the APB interface. Once it has modified the LCD_RAM using the HAL_LCD_Write() API, + it sets the UDR flag in the LCD_SR register using the HAL_LCD_UpdateDisplayRequest() API. + + [..] This UDR flag (update display request) requests the updated information to be + moved into the second buffer level (LCD_DISPLAY). + + [..] This operation is done synchronously with the frame (at the beginning of the + next frame), until the update is completed, the LCD_RAM is write protected and + the UDR flag stays high. + + [..] Once the update is completed another flag (UDD - Update Display Done) is set and + generates an interrupt if the UDDIE bit in the LCD_FCR register is set. + The time it takes to update LCD_DISPLAY is, in the worst case, one odd and one + even frame. + + [..] The update will not occur (UDR = 1 and UDD = 0) until the display is + enabled (LCDEN = 1). + +@endverbatim + * @{ + */ + +/** + * @brief Write a word in the specific LCD RAM. + * @param hlcd LCD handle + * @param RAMRegisterIndex specifies the LCD RAM Register. + * This parameter can be one of the following values: + * @arg LCD_RAM_REGISTER0: LCD RAM Register 0 + * @arg LCD_RAM_REGISTER1: LCD RAM Register 1 + * @arg LCD_RAM_REGISTER2: LCD RAM Register 2 + * @arg LCD_RAM_REGISTER3: LCD RAM Register 3 + * @arg LCD_RAM_REGISTER4: LCD RAM Register 4 + * @arg LCD_RAM_REGISTER5: LCD RAM Register 5 + * @arg LCD_RAM_REGISTER6: LCD RAM Register 6 + * @arg LCD_RAM_REGISTER7: LCD RAM Register 7 + * @arg LCD_RAM_REGISTER8: LCD RAM Register 8 + * @arg LCD_RAM_REGISTER9: LCD RAM Register 9 + * @arg LCD_RAM_REGISTER10: LCD RAM Register 10 + * @arg LCD_RAM_REGISTER11: LCD RAM Register 11 + * @arg LCD_RAM_REGISTER12: LCD RAM Register 12 + * @arg LCD_RAM_REGISTER13: LCD RAM Register 13 + * @arg LCD_RAM_REGISTER14: LCD RAM Register 14 + * @arg LCD_RAM_REGISTER15: LCD RAM Register 15 + * @param RAMRegisterMask specifies the LCD RAM Register Data Mask. + * @param Data specifies LCD Data Value to be written. + * @retval None + */ +HAL_StatusTypeDef HAL_LCD_Write(LCD_HandleTypeDef *hlcd, uint32_t RAMRegisterIndex, uint32_t RAMRegisterMask, uint32_t Data) +{ + uint32_t tickstart; + HAL_LCD_StateTypeDef state = hlcd->State; + + if ((state == HAL_LCD_STATE_READY) || (state == HAL_LCD_STATE_BUSY)) + { + /* Check the parameters */ + assert_param(IS_LCD_RAM_REGISTER(RAMRegisterIndex)); + + if (hlcd->State == HAL_LCD_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hlcd); + hlcd->State = HAL_LCD_STATE_BUSY; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /*!< Wait Until the LCD is ready */ + while (__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_UDR) != RESET) + { + if ((HAL_GetTick() - tickstart) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_UDR; + + /* Process Unlocked */ + __HAL_UNLOCK(hlcd); + + return HAL_TIMEOUT; + } + } + } + + /* Copy the new Data bytes to LCD RAM register */ + MODIFY_REG(hlcd->Instance->RAM_COM0, ~(RAMRegisterMask), Data); + MODIFY_REG(hlcd->Instance->RAM_COM1, ~(RAMRegisterMask), Data); + MODIFY_REG(hlcd->Instance->RAM_COM2, ~(RAMRegisterMask), Data); + MODIFY_REG(hlcd->Instance->RAM_COM3, ~(RAMRegisterMask), Data); + MODIFY_REG(hlcd->Instance->RAM_COM4, ~(RAMRegisterMask), Data); + MODIFY_REG(hlcd->Instance->RAM_COM5, ~(RAMRegisterMask), Data); + MODIFY_REG(hlcd->Instance->RAM_COM6, ~(RAMRegisterMask), Data); + MODIFY_REG(hlcd->Instance->RAM_COM7, ~(RAMRegisterMask), Data); + return HAL_OK; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Clear the LCD RAM registers. + * @param hlcd LCD handle + * @retval None + */ +HAL_StatusTypeDef HAL_LCD_Clear(LCD_HandleTypeDef *hlcd) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_ERROR; + HAL_LCD_StateTypeDef state = hlcd->State; + + if ((state == HAL_LCD_STATE_READY) || (state == HAL_LCD_STATE_BUSY)) + { + /* Process Locked */ + __HAL_LOCK(hlcd); + + hlcd->State = HAL_LCD_STATE_BUSY; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /*!< Wait Until the LCD is ready */ + while (__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_UDR) != RESET) + { + if ((HAL_GetTick() - tickstart) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_UDR; + + /* Process Unlocked */ + __HAL_UNLOCK(hlcd); + + return HAL_TIMEOUT; + } + } + /* Clear the LCD_RAM registers */ + hlcd->Instance->RAM_COM0 = 0; + hlcd->Instance->RAM_COM1 = 0; + hlcd->Instance->RAM_COM2 = 0; + hlcd->Instance->RAM_COM3 = 0; + hlcd->Instance->RAM_COM4 = 0; + hlcd->Instance->RAM_COM5 = 0; + hlcd->Instance->RAM_COM6 = 0; + hlcd->Instance->RAM_COM7 = 0; + /* Update the LCD display */ + status = HAL_LCD_UpdateDisplayRequest(hlcd); + } + return status; +} + +/** + * @brief Enable the Update Display Request. + * @param hlcd LCD handle + * @note Each time software modifies the LCD_RAM it must set the UDR bit to + * transfer the updated data to the second level buffer. + * The UDR bit stays set until the end of the update and during this + * time the LCD_RAM is write protected. + * @note When the display is disabled, the update is performed for all + * LCD_DISPLAY locations. + * When the display is enabled, the update is performed only for locations + * for which commons are active (depending on DUTY). For example if + * DUTY = 1/2, only the LCD_DISPLAY of COM0 and COM1 will be updated. + * @retval None + */ +HAL_StatusTypeDef HAL_LCD_UpdateDisplayRequest(LCD_HandleTypeDef *hlcd) +{ + uint32_t tickstart; + + /* Clear the Update Display Done flag before starting the update display request */ + __HAL_LCD_CLEAR_FLAG(hlcd, LCD_FLAG_UDD); + + /* Enable the display request */ + hlcd->Instance->SR |= LCD_SR_UDR; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /*!< Wait Until the LCD display is done */ + while (__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_UDD) == RESET) + { + if ((HAL_GetTick() - tickstart) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_UDD; + + /* Process Unlocked */ + __HAL_UNLOCK(hlcd); + + return HAL_TIMEOUT; + } + } + + hlcd->State = HAL_LCD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hlcd); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup LCD_Exported_Functions_Group3 Peripheral State methods + * @brief LCD State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the LCD: + (+) HAL_LCD_GetState() API can be helpful to check in run-time the state of the LCD peripheral State. + (+) HAL_LCD_GetError() API to return the LCD error code. +@endverbatim + * @{ + */ + +/** + * @brief Return the LCD handle state. + * @param hlcd LCD handle + * @retval HAL state + */ +HAL_LCD_StateTypeDef HAL_LCD_GetState(LCD_HandleTypeDef *hlcd) +{ + /* Return LCD handle state */ + return hlcd->State; +} + +/** + * @brief Return the LCD error code. + * @param hlcd LCD handle + * @retval LCD Error Code + */ +uint32_t HAL_LCD_GetError(LCD_HandleTypeDef *hlcd) +{ + return hlcd->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup LCD_Private_Functions LCD Private Functions + * @{ + */ + +/** + * @brief Wait until the LCD FCR register is synchronized in the LCDCLK domain. + * This function must be called after any write operation to LCD_FCR register. + * @retval None + */ +HAL_StatusTypeDef LCD_WaitForSynchro(LCD_HandleTypeDef *hlcd) +{ + uint32_t tickstart; + + /* Get timeout */ + tickstart = HAL_GetTick(); + + /* Loop until FCRSF flag is set */ + while (__HAL_LCD_GET_FLAG(hlcd, LCD_FLAG_FCRSF) == RESET) + { + if ((HAL_GetTick() - tickstart) > LCD_TIMEOUT_VALUE) + { + hlcd->ErrorCode = HAL_LCD_ERROR_FCRSF; + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LCD */ + +#endif /* HAL_LCD_MODULE_ENABLED */ + +/** + * @} + */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_lpawur.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_lpawur.c new file mode 100644 index 0000000000..1090fe2ed2 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_lpawur.c @@ -0,0 +1,356 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_lpawur.c + * @author MCD Application Team + * @brief This file provides firmware functions to manage the LPAWUR Radio + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" +#include + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup LPAWUR + * @{ + */ + +#ifdef HAL_LPAWUR_MODULE_ENABLED + +/** @defgroup LPAWUR_Private_Macros LPAWUR Private Macros + * @{ + */ + +#define IS_IRQ_ENABLE(IRQ_EN) (((IRQ_EN) == IRQ_BIT_SYNC_DETECTED) || \ + ((IRQ_EN) == IRQ_FRAME_SYNC_COMPLETE) || \ + ((IRQ_EN) == IRQ_FRAME_COMPLETE) || \ + ((IRQ_EN) == IRQ_FRAME_VALID) ) + +#define IS_ERROR(ERROR) (((ERROR) == ERROR_NO) || \ + ((ERROR) == ERROR_SYNC) || \ + ((ERROR) == ERROR_FRAMING) || \ + ((ERROR) == ERROR_CRC) ) + +#define IS_TREC_LOOP_ALGO(STATE) (((STATE) == DEFAULT) || ((STATE) == TWO_STEPS)) + +/** + * @} + */ + +/** +* @brief Configure the RF IP of LPAWUR. +* @param pxSLPAWUR_RFConfigStruct SLPAWUR_RFConfig configuration structure. +* @retval None. +*/ +void HAL_LPAWUR_RFConfigInit(SLPAWUR_RFConfig* pxSLPAWUR_RFConfigStruct) +{ + assert_param(IS_EDICAL(pxSLPAWUR_RFConfigStruct->EnergyDetectorIcal)); + assert_param(IS_AGC_MODE(pxSLPAWUR_RFConfigStruct->AgcMode)); + assert_param(IS_AGC_HOLD_MODE(pxSLPAWUR_RFConfigStruct->AgcHoldMode)); + + HAL_LPAWUR_MspInit(); + + /* Set Energy Detector Calibration value */ + LL_LPAWUR_SetEdIcal(pxSLPAWUR_RFConfigStruct->EnergyDetectorIcal); + + /* Configure Clock divider */ + LL_LPAWUR_SetClkDiv(pxSLPAWUR_RFConfigStruct->ClockDivider); + + /* Configure Energy Detector switch */ + LL_LPAWUR_SetEdSwitch(pxSLPAWUR_RFConfigStruct->EnergyDetectorSwitch); + + /* Configure AGC Reset Mode */ + LL_LPAWUR_SetAgcResetMode(pxSLPAWUR_RFConfigStruct->AgcResetMode); + + /* Configure AGC Hold Mode */ + LL_LPAWUR_SetAgcHoldMode(pxSLPAWUR_RFConfigStruct->AgcHoldMode); + + /* Configure Agc Mode */ + LL_LPAWUR_SetAgcMode(pxSLPAWUR_RFConfigStruct->AgcMode); + + /* Configure Agc level High */ + LL_LPAWUR_SetAGCHighLevel(pxSLPAWUR_RFConfigStruct->AgcHiLvl); + + /* Configure DC current subtraction enabling signal */ + LL_LPAWUR_EnableDCControl(pxSLPAWUR_RFConfigStruct->DCCurrentSubtraction); + + /* Configure Agc level Low */ + LL_LPAWUR_SetAGCLowLevel(pxSLPAWUR_RFConfigStruct->AgcLoLvl); + +} + +/** +* @brief Get the LPAWUR RF IP configuration. +* @retval SLPAWUR_RFConfig configuration structure. +*/ +SLPAWUR_RFConfig HAL_LPAWUR_GetRFConfig(void) +{ + SLPAWUR_RFConfig SLPAWUR_CurrentRFConfig; + + SLPAWUR_CurrentRFConfig.EnergyDetectorIcal = LL_LPAWUR_GetEdIcal(); + SLPAWUR_CurrentRFConfig.ClockDivider = LL_LPAWUR_GetClkDiv(); + SLPAWUR_CurrentRFConfig.EnergyDetectorSwitch = LL_LPAWUR_GetEdSwitch(); + SLPAWUR_CurrentRFConfig.AgcResetMode = LL_LPAWUR_GetAgcResetMode(); + SLPAWUR_CurrentRFConfig.AgcHoldMode = LL_LPAWUR_GetAgcHoldMode(); + SLPAWUR_CurrentRFConfig.AgcMode = LL_LPAWUR_GetAgcMode(); + + return SLPAWUR_CurrentRFConfig; +} + +/** +* @brief Configure the frame of LPAWUR RF IP. +* @param pxSLPAWUR_FrameInitStruct SLPAWUR_FrameInit configuration structure. +* @retval None. +*/ +void HAL_LPAWUR_FrameInit(SLPAWUR_FrameInit* pxSLPAWUR_FrameInitStruct) +{ + assert_param(IS_LPAWUR_PAYLOAD_LENGTH(pxSLPAWUR_FrameInitStruct->PayloadLength)); + + /* Set the Timing recovery loop algorithm selection */ + LL_LPAWUR_SetTRecAlgorithm(pxSLPAWUR_FrameInitStruct->TRecAlgoSel); + + /* Set the Slow Clock Cycle Per Bit counter */ + LL_LPAWUR_SetSlowClkCyclePerBitCnt(pxSLPAWUR_FrameInitStruct->SlowClkCyclePerBitCnt); + + /* Set the Paylaod Length */ + LL_LPAWUR_SetPayloadLength(pxSLPAWUR_FrameInitStruct->PayloadLength); + + /* Set the SYNC threshold */ + LL_LPAWUR_SetSyncThrCnt(pxSLPAWUR_FrameInitStruct->SyncThr); + + /* Set the SYNC Length */ + LL_LPAWUR_SetSyncLength(pxSLPAWUR_FrameInitStruct->SyncLength); + + /* Set the Preamble threshold counter */ + LL_LPAWUR_SetPreambleThrCnt(pxSLPAWUR_FrameInitStruct->PreambleThrCnt); + + /* Set the Preamble Enable State */ + LL_LPAWUR_SetPreambleEnable(pxSLPAWUR_FrameInitStruct->PreambleEnable); + + /* Set the SYNC counter timeout */ + LL_LPAWUR_SetFrameSyncCntTimeout(pxSLPAWUR_FrameInitStruct->FrameSyncCntTimeout); + + /* Configure the SYNC pattern */ + HAL_LPAWUR_SetSync((uint32_t)(pxSLPAWUR_FrameInitStruct->FrameSyncPattenHigh<<16) +\ + (uint32_t)(pxSLPAWUR_FrameInitStruct->FrameSyncPatternLow)); + + /* Configure the kp gain value for the timing recovery loop */ + LL_LPAWUR_SetKp(pxSLPAWUR_FrameInitStruct->KpGain); + + /* Configure the ki gain value for the timing recovery loop */ + LL_LPAWUR_SetKi(pxSLPAWUR_FrameInitStruct->KiGain); +} + +/** +* @brief Get the frame configuration of LPAWUR RF IP. +* @retval SLPAWUR_FrameInit configuration structure. +*/ +SLPAWUR_FrameInit HAL_LPAWUR_GetFrameInfo(void) +{ + SLPAWUR_FrameInit SLPAWUR_CurrentFrameInfo; + + SLPAWUR_CurrentFrameInfo.SlowClkCyclePerBitCnt = LL_LPAWUR_GetSlowClkCyclePerBitCnt(); + SLPAWUR_CurrentFrameInfo.PayloadLength = LL_LPAWUR_GetPayloadLength(); + SLPAWUR_CurrentFrameInfo.SyncThr = LL_LPAWUR_GetSyncThrCnt(); + SLPAWUR_CurrentFrameInfo.SyncLength = LL_LPAWUR_GetSyncLength(); + SLPAWUR_CurrentFrameInfo.PreambleThrCnt = LL_LPAWUR_GetPreambleThrCnt(); + SLPAWUR_CurrentFrameInfo.PreambleEnable = LL_LPAWUR_GetPreambleEnable(); + SLPAWUR_CurrentFrameInfo.FrameSyncCntTimeout = LL_LPAWUR_GetFrameSyncCntTimeout(); + SLPAWUR_CurrentFrameInfo.FrameSyncPattenHigh = LL_LPAWUR_GetSyncPatternHigh(); + SLPAWUR_CurrentFrameInfo.FrameSyncPatternLow = LL_LPAWUR_GetSyncPatternLow(); + + return SLPAWUR_CurrentFrameInfo; +} + +/** +* @brief Configure the IRQ of LPAWUR. +* @param IrqEnable LPAWUR_IrqEnable configuration structure. +* @retval None. +*/ +void HAL_LPAWUR_IrqConfig(LPAWUR_IrqEnable IrqEnable) +{ + assert_param(IS_IRQ_ENABLE(IrqEnable)); + if(IrqEnable == IRQ_BIT_SYNC_DETECTED) + { + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_BIT_SYNC_DETECTED_E,0x01); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_SYNC_COMPLETE_E,0x00); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_COMPLETE_E,0x00); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_VALID_E,0x00); + } + else if(IrqEnable == IRQ_FRAME_SYNC_COMPLETE) + { + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_BIT_SYNC_DETECTED_E,0x00); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_SYNC_COMPLETE_E,0x01); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_COMPLETE_E,0x00); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_VALID_E,0x00); + } + else if(IrqEnable == IRQ_FRAME_COMPLETE) + { + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_BIT_SYNC_DETECTED_E,0x00); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_SYNC_COMPLETE_E,0x00); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_COMPLETE_E,0x01); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_VALID_E,0x00); + } + else if(IrqEnable == IRQ_FRAME_VALID) + { + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_BIT_SYNC_DETECTED_E,0x00); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_SYNC_COMPLETE_E,0x00); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_COMPLETE_E,0x00); + MODIFY_REG_FIELD(LPAWUR->IRQ_ENABLE,LPAWUR_IRQ_ENABLE_FRAME_VALID_E,0x01); + } +} + +/** +* @brief Get the RX status of LPAWUR. +* @retval LPAWUR_Status configuration structure. +*/ +LPAWUR_Status HAL_LPAWUR_GetStatus(void) +{ + LPAWUR_Status status = NO_STATUS; + if(READ_REG_FIELD(LPAWUR->STATUS,LPAWUR_STATUS_BIT_SYNC_DETECTED_F)) + status = BIT_SYNC_DETECTED_F; + if(READ_REG_FIELD(LPAWUR->STATUS,LPAWUR_STATUS_FRAME_SYNC_COMPLETE_F)) + status = FRAME_SYNC_COMPLETE_F; + if(READ_REG_FIELD(LPAWUR->STATUS,LPAWUR_STATUS_FRAME_COMPLETE_F)) + status = FRAME_COMPLETE_F; + if(READ_REG_FIELD(LPAWUR->STATUS,LPAWUR_STATUS_FRAME_VALID_F)) + status = FRAME_VALID_F; + + return status; +} + +/** +* @brief Reset the RX status of LPAWUR. +* @retval None. +*/ +void HAL_LPAWUR_ClearStatus(void) +{ + MODIFY_REG_FIELD(LPAWUR->STATUS,LPAWUR_STATUS_BIT_SYNC_DETECTED_F,0x01); + MODIFY_REG_FIELD(LPAWUR->STATUS,LPAWUR_STATUS_FRAME_SYNC_COMPLETE_F,0x01); + MODIFY_REG_FIELD(LPAWUR->STATUS,LPAWUR_STATUS_FRAME_COMPLETE_F,0x01); + MODIFY_REG_FIELD(LPAWUR->STATUS,LPAWUR_STATUS_FRAME_VALID_F,0x01); +} + +/** +* @brief Set the LPAWUR Sync word. +* @param sync 32 bits SYNC word. +* @retval None. +*/ +void HAL_LPAWUR_SetSync(uint32_t sync) +{ + uint16_t SyncHigh = (uint16_t)(sync>>16); + uint16_t SyncLow = (uint16_t)(sync&0x0000FFFF); + MODIFY_REG_FIELD(LPAWUR->FRAME_SYNC_CONFIG, LPAWUR_FRAME_SYNC_CONFIG_FRAME_SYNC_PATTERN_H, SyncHigh); + MODIFY_REG_FIELD(LPAWUR->FRAME_SYNC_CONFIG, LPAWUR_FRAME_SYNC_CONFIG_FRAME_SYNC_PATTERN_L, SyncLow); +} + +/** +* @brief Get the LPAWUR SYNC word. +* @retval 32 bits SYNC word (manchester coded). +*/ +uint32_t HAL_LPAWUR_GetSync(void) +{ + uint16_t SyncHigh = READ_REG_FIELD(LPAWUR->FRAME_SYNC_CONFIG,LPAWUR_FRAME_SYNC_CONFIG_FRAME_SYNC_PATTERN_H); + uint16_t SyncLow = READ_REG_FIELD(LPAWUR->FRAME_SYNC_CONFIG,LPAWUR_FRAME_SYNC_CONFIG_FRAME_SYNC_PATTERN_L); + + return (uint32_t)((SyncHigh<<16) + SyncLow); +} + +/** +* @brief Get the payload. +* @param buff buffer and length. +* @retval None. +*/ +void HAL_LPAWUR_GetPayload(uint8_t* buff) +{ + uint32_t payload0 = READ_REG_FIELD(LPAWUR->PAYLOAD_0,LPAWUR_PAYLOAD_0_PAYLOAD_0); + uint32_t payload1 = READ_REG_FIELD(LPAWUR->PAYLOAD_1,LPAWUR_PAYLOAD_1_PAYLOAD_1); + uint8_t length = LL_LPAWUR_GetPayloadLength(); + + for( uint8_t i=0; i<4 ; i++) + { + buff[i] = ((payload0>>(i*8)) & 0xFF); + } + + if(length > 4) + { + for(uint8_t j=0; j>(j*8)) & 0xFF); + } + } +} + +/** +* @brief Get the IP version of the LPAWUR block. +* @retval IP version. +*/ +SLPAWUR_Version HAL_LPAWUR_GetVersion(void) +{ + SLPAWUR_Version LPAWUR_Version; + + LPAWUR_Version.product = READ_REG_FIELD(LPAWUR->RFIP_VERSION, LPAWUR_RFIP_VERSION_PRODUCT); + LPAWUR_Version.version = READ_REG_FIELD(LPAWUR->RFIP_VERSION, LPAWUR_RFIP_VERSION_VERSION); + LPAWUR_Version.revision = READ_REG_FIELD(LPAWUR->RFIP_VERSION, LPAWUR_RFIP_VERSION_REVISION); + + return LPAWUR_Version; +} + +/** + * @brief LPAWUR MSP Init + * @retval None + */ +__weak void HAL_LPAWUR_MspInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_LPAWUR_MspInit could be implemented in the user file + */ +} + +/** + * @brief LPAWUR MSP DeInit + * @retval None + */ +__weak void HAL_LPAWUR_MspDeInit(void) +{ + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_LPAWUR_MspDeInit could be implemented in the user file + */ +} + +__weak void HAL_LPAWUR_IRQ_Callback(void) +{ +} + +void HAL_LPAWUR_IRQHandler(void) +{ + HAL_LPAWUR_IRQ_Callback(); +} + +/** + * @} + */ + +#endif /* HAL_LPAWUR_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_mrsubg.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_mrsubg.c new file mode 100644 index 0000000000..fb61750b7f --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_mrsubg.c @@ -0,0 +1,1229 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_mrsubg.c + * @author GPM Application Team + * @brief This file provides firmware functions to manage the MRSubG + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" +#include + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup MRSUBG + * @{ + */ + +#ifdef HAL_MRSUBG_MODULE_ENABLED + +/** @defgroup MRSUBG_Private_Constants MRSUBG Private Constants + * @{ + */ +#define MAX_DBM 0x51 + +/** + * @} + */ + + +/** @defgroup MRSUBG_Private_Macros MRSUBG Private Macros + * @{ + */ + + +#define S_ABS(a) ((a)>0?(a):-(a)) + +#define IS_FREQUENCY_BAND(FREQUENCY) (IS_FREQUENCY_BAND_HIGH(FREQUENCY) || \ + IS_FREQUENCY_BAND_LOW(FREQUENCY)) + +#define IS_FREQUENCY_BAND_HIGH(FREQUENCY) ((FREQUENCY)>=HIGH_BAND_LOWER_LIMIT && \ + (FREQUENCY)<=HIGH_BAND_UPPER_LIMIT) + + +#define IS_FREQUENCY_BAND_LOW(FREQUENCY) ((FREQUENCY)>=LOW_BAND_LOWER_LIMIT && \ + (FREQUENCY)<=LOW_BAND_UPPER_LIMIT) + +#define IS_MODULATION(MOD) (((MOD) == MOD_2FSK) || \ + ((MOD) == MOD_4FSK) || \ + ((MOD) == MOD_2GFSK05) || \ + ((MOD) == MOD_2GFSK1) || \ + ((MOD) == MOD_4GFSK05) || \ + ((MOD) == MOD_4GFSK1) || \ + ((MOD) == MOD_ASK) || \ + ((MOD) == MOD_OOK) || \ + ((MOD) == MOD_POLAR) || \ + ((MOD) == MOD_CW) ) + + +#define IS_DATARATE(DATARATE) (DATARATE>=MINIMUM_DATARATE && DATARATE<=((uint64_t)MAXIMUM_DATARATE)) +/** + * @} + */ + +/** @defgroup MRSUBG_Private_Variables MRSUBG Private Variables + * @{ + */ + +static const uint32_t s_Channel_Filter_Bandwidth[99]= +{ + 1600000,1510000,1422000,1332000,1244000,1154000,1066000, \ + 976000,888000,800000,755000,711000,666000,622000,577000, \ + 533000,488000,444000,400000,377000,355000,333000,311000, \ + 288000,266000,244000,222000,200000,188000,178000,166000, \ + 155000,144000,133000,122000,111000,100000,94400,88900,83300, \ + 77800,72200,66700,61100,55600,50000,47200,44400,41600,38900, \ + 36100,33300,30500,27800,25000,23600,22200,20800,19400,18100, \ + 16600,15300,13900,12500,11800,11100,10400,9700,9000,8300,7600, \ + 6900,6125,5910,5550,5200,4870,4500,4100,3800,3500,3125,2940, \ + 2780,2600,2400,2200,2100,1900,1700 +}; + +const uint32_t SFD_2FSK[] = { + 0x904E0000, /* "1001000001001110" */ + 0x6F4E0000 /* "0110111101001110" */ +}; + +const uint32_t SFD_4FSK[] = { + 0xD75575FD, /* "11010111010101010111010111111101" */ + 0x7DFF75FD /* "01111101111111110111010111111101" */ +}; + +static WMbusSubmode s_cWMbusSubmode = WMBUS_SUBMODE_NOT_CONFIGURED; + +/** + * @} + */ + +/** @defgroup MRSUBG_Private_Functions MRSUBG Private Functions + * @{ + */ + +static uint32_t MRSubG_ComputeDatarate(uint16_t cM, uint8_t cE); +static void MRSubG_SearchDatarateME(uint32_t lDatarate, uint16_t* pcM, uint8_t* pcE); +static void MRSubG_SearchFreqDevME(uint32_t lFDev, uint8_t* pcM, uint8_t* pcE, uint8_t bs); +static uint32_t MRSubG_ComputeFreqDeviation(uint8_t cM, uint8_t cE, uint8_t bs); +static void MRSubG_SearchChannelBwME(uint32_t lBandwidth, uint8_t* pcM, uint8_t* pcE); +static void MRSubG_ComputeSynthWord(uint32_t frequency, uint8_t* synth_int, uint32_t* synth_frac, uint8_t* band); +static int32_t MRSubG_ConvertRssiToDbm(uint16_t rssi_level_from_register); +static uint8_t MRSubG_GetAllowedMaxOutputPower(MRSubG_PA_DRVMode paMode); +static void MRSUBG_EvaluateDSSS(MRSubGModSelect xModulation, uint8_t dsssExponent); + +/** +* @brief Computes the synth word from a given frequency. +* @param frequency Target frequency value expressed in Hz. +* @param synth_int pointer to the int part of the synth word +* @param synth_frac pointer to the fract part of the synth word +* @param band pointer to the high/low band selector +* @retval None. +*/ +static void MRSubG_ComputeSynthWord(uint32_t frequency, uint8_t* synth_int, uint32_t* synth_frac, uint8_t* band) +{ + if(IS_FREQUENCY_BAND_HIGH(frequency)) { + *band = HIGH_BAND_FACTOR; + } + else { + *band = LOW_BAND_FACTOR; + } + + *synth_int = (uint32_t)(*band * frequency/LL_GetXTALFreq()); + + *synth_frac = (uint32_t)(((*band * (uint64_t)frequency * (1<<20))/LL_GetXTALFreq()) - (*synth_int * (1<<20))); +} + +/** +* @brief Evaluate the data rate. +* @param cM the mantissa value. +* @param cE the exponent value. +* @retval The datarate. +*/ +static uint32_t MRSubG_ComputeDatarate(uint16_t cM, uint8_t cE) +{ + uint32_t f_sys=LL_GetXTALFreq()/3; /* 16 MHz nominal */ + uint64_t dr; + + if(cE==0){ + dr = ((uint64_t)f_sys*cM); + return (uint32_t)(dr>>32); + } + else if(cE==15){ + return ((uint64_t)f_sys*(8*cM)); + } + else{ + dr = ((uint64_t)f_sys)*((uint64_t)cM+65536); + return (uint32_t)(dr>>(33-cE)); + } +} + +/** +* @brief Returns the mantissa and exponent, whose value used in the datarate formula +* will give the datarate value closer to the given datarate. +* @param lDatarate datarate expressed in sps. +* @param pcM pointer to the returned mantissa value. +* @param pcE pointer to the returned exponent value. +* @retval None. +*/ +static void MRSubG_SearchDatarateME(uint32_t lDatarate, uint16_t* pcM, uint8_t* pcE) +{ + uint32_t lDatarateTmp, f_sys=LL_GetXTALFreq()/3; + uint8_t uDrE; + uint64_t tgt1,tgt2,tgt; + + /* Search the exponent value */ + for(uDrE = 0; uDrE<16; uDrE++) { + lDatarateTmp = MRSubG_ComputeDatarate(0xFFFF, uDrE); + if(lDatarate<=lDatarateTmp) + break; + } + (*pcE) = (uint8_t)uDrE; + + if(uDrE==0) { + tgt=((uint64_t)lDatarate)<<32; + (*pcM) = (uint16_t)(tgt/f_sys); + tgt1=(uint64_t)f_sys*(*pcM); + tgt2=(uint64_t)f_sys*((*pcM)+1); + } + else { + tgt=((uint64_t)lDatarate)<<(33-uDrE); + (*pcM) = (uint16_t)((tgt/f_sys)-65536); + tgt1=(uint64_t)f_sys*((*pcM)+65536); + tgt2=(uint64_t)f_sys*((*pcM)+1+65536); + } + + (*pcM)=((tgt2-tgt)<(tgt-tgt1))?((*pcM)+1):(*pcM); +} + +/** +* @brief Returns the mantissa and exponent, whose value used in the Frequency Deviation formula +* will give the value closer to the given one. +* @param cM the mantissa value. +* @param cE the exponent value. +* @param bs the band value. +* @retval The frequency deviation. +*/ +static uint32_t MRSubG_ComputeFreqDeviation(uint8_t cM, uint8_t cE, uint8_t bs){ + uint32_t f_xo = LL_GetXTALFreq(); + + if(cE==0) { + return (uint32_t)((uint64_t)f_xo*(cM*bs/8)/(bs*(1<<19))); + } + + return (uint32_t)((uint64_t)f_xo*((256+cM)*(1<<(cE-1))*bs/8)/(bs*(1<<19)));; +} + +/** +* @brief Returns the mantissa and exponent, whose value used in the Frequency Deviation formula +* will give the value closer to the given one. +* @param lFDev frequency deviation expressed in Hz. +* @param pcM pointer to the returned mantissa value. +* @param pcE pointer to the returned exponent value. +* @param bs the high/low band selector +* @retval None. +*/ +static void MRSubG_SearchFreqDevME(uint32_t lFDev, uint8_t* pcM, uint8_t* pcE, uint8_t bs){ + uint8_t uFDevE; + uint32_t lFDevTmp; + uint64_t tgt1,tgt2,tgt; + + /* Search the exponent of the frequency deviation value */ + for(uFDevE = 0; uFDevE != 12; uFDevE++) { + lFDevTmp = MRSubG_ComputeFreqDeviation(255, uFDevE, bs); + if(lFDev=0) && ((i_tmp+j-1)<=98)) { + chfltCalculation[j] = (int32_t)lBandwidth - (int32_t)(((uint64_t)s_Channel_Filter_Bandwidth[i_tmp+j-1]*f_dig)/16000000); + } + else { + chfltCalculation[j] = 0x7FFFFFFF; + } + } + uint32_t chfltDelta = 0xFFFFFFFF; + + for(uint8_t j=0;j<3;j++) { + if(S_ABS(chfltCalculation[j]) 0); + uint8_t dsss_sf = (1 << dsssExponent); /* Spread Factor = 2^dssExponent */ + uint8_t dsss_acq_thr = (dsss_sf - 1); + + if (dsssExponent > 3) { + dsss_acq_thr = dsss_sf/2; + } + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->DSSS_CTRL, MR_SUBG_GLOB_STATIC_DSSS_CTRL_DSSS_EN, dsss_en); + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->DSSS_CTRL, MR_SUBG_GLOB_STATIC_DSSS_CTRL_SPREADING_EXP, dsssExponent); + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->DSSS_CTRL, MR_SUBG_GLOB_STATIC_DSSS_CTRL_ACQ_THR, dsss_acq_thr); +} + +/** + * @} + */ + + +/** @defgroup MRSUBG_Exported_Functions MRSUBG Exported Functions + * @{ + */ + +/** +* @brief Get the IP version of the MRSubG. +* @retval IP version. +*/ +SMRSubGVersion HAL_MRSubGGetVersion(void) +{ + SMRSubGVersion MRSubGVersion; + + MRSubGVersion.product = READ_REG_FIELD(MR_SUBG_GLOB_MISC->RFIP_VERSION, MR_SUBG_GLOB_MISC_RFIP_VERSION_PRODUCT); + MRSubGVersion.version = READ_REG_FIELD(MR_SUBG_GLOB_MISC->RFIP_VERSION, MR_SUBG_GLOB_MISC_RFIP_VERSION_VERSION); + MRSubGVersion.revision = READ_REG_FIELD(MR_SUBG_GLOB_MISC->RFIP_VERSION, MR_SUBG_GLOB_MISC_RFIP_VERSION_REVISION); + + return MRSubGVersion; +} + +/** +* @brief Initializes the MR_SUBG radio interface according to the specified +* parameters in the pxSRadioInitStruct. +* @param pxSRadioInitStruct pointer to a SMRSubGConfig structure that +* contains the configuration information for the MR_SUBG radio part of STM32WL3. +* @retval Error code: 0=no error, 1=error during calibration of VCO. +*/ +uint8_t HAL_MRSubG_Init(SMRSubGConfig* pxSRadioInitStruct){ + + assert_param(IS_FREQUENCY_BAND(pxSRadioInitStruct->lFrequencyBase)); + assert_param(IS_MODULATION(pxSRadioInitStruct->xModulationSelect)); + assert_param(IS_DATARATE(pxSRadioInitStruct->lDatarate)); + + HAL_MRSubG_MspInit(); + + /* Setup design values for default registers */ + MODIFY_REG_FIELD(MR_SUBG_RADIO->AFC1_CONFIG, MR_SUBG_RADIO_AFC1_CONFIG_AFC_FAST_PERIOD, 0x00); + + MODIFY_REG_FIELD(MR_SUBG_RADIO->CLKREC_CTRL0, MR_SUBG_RADIO_CLKREC_CTRL0_PSTFLT_LEN, 0x01); + MODIFY_REG_FIELD(MR_SUBG_RADIO->CLKREC_CTRL0, MR_SUBG_RADIO_CLKREC_CTRL0_CLKREC_P_GAIN_FAST, 0x03); + MODIFY_REG_FIELD(MR_SUBG_RADIO->CLKREC_CTRL0, MR_SUBG_RADIO_CLKREC_CTRL0_CLKREC_I_GAIN_FAST, 0x08); + + MODIFY_REG_FIELD(MR_SUBG_RADIO->CLKREC_CTRL1, MR_SUBG_RADIO_CLKREC_CTRL1_CLKREC_ALGO_SEL, 0x00); + MODIFY_REG_FIELD(MR_SUBG_RADIO->CLKREC_CTRL1, MR_SUBG_RADIO_CLKREC_CTRL1_CLKREC_P_GAIN_SLOW, 0x05); + MODIFY_REG_FIELD(MR_SUBG_RADIO->CLKREC_CTRL1, MR_SUBG_RADIO_CLKREC_CTRL1_CLKREC_I_GAIN_SLOW, 0x0C); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->DSSS_CTRL, MR_SUBG_GLOB_STATIC_DSSS_CTRL_ACQ_HITS, 0x03); + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->DSSS_CTRL, MR_SUBG_GLOB_STATIC_DSSS_CTRL_ACQ_WINDOW, 0x04); + + /* Enable calibration */ + SET_BIT(MR_SUBG_GLOB_DYNAMIC->VCO_CAL_CONFIG, MR_SUBG_GLOB_DYNAMIC_VCO_CAL_CONFIG_VCO_CALIB_REQ); + + /* Avoid AGC glitches */ + WRITE_REG(MR_SUBG_RADIO->RF_FSM7_TIMEOUT, 0x0F); + + /* Set synth registers */ + HAL_MRSubG_SetFrequencyBase(pxSRadioInitStruct->lFrequencyBase); + + /* Configure modulation */ + HAL_MRSubG_SetModulation(pxSRadioInitStruct->xModulationSelect, pxSRadioInitStruct->dsssExp); + + /* Configure datarate */ + HAL_MRSubG_SetDatarate(pxSRadioInitStruct->lDatarate); + + /* Configure frequency deviation */ + HAL_MRSubG_SetFrequencyDev(pxSRadioInitStruct->lFreqDev); + + /* Configure RX channel bandwidth */ + HAL_MRSubG_SetChannelBW(pxSRadioInitStruct->lBandwidth); + + /* Configure Output Power */ + HAL_MRSubG_SetPALeveldBm(7, pxSRadioInitStruct->outputPower, pxSRadioInitStruct->PADrvMode); + + return 0; +} + +/** + * @brief Get the main radio info for the current configuration. + * @param pxSRadioInitStruct pointer to a structure of the type of @ref SMRSubGConfig + * @retval None. + */ +void HAL_MRSubG_GetInfo(SMRSubGConfig* pxSRadioInitStruct){ + pxSRadioInitStruct->lFrequencyBase = HAL_MRSubG_GetFrequencyBase(); + pxSRadioInitStruct->xModulationSelect = HAL_MRSubG_GetModulation(); + pxSRadioInitStruct->lDatarate = HAL_MRSubG_GetDatarate(); + pxSRadioInitStruct->lFreqDev = HAL_MRSubG_GetFrequencyDev(); + pxSRadioInitStruct->lBandwidth = HAL_MRSubG_GetChannelBW(); + pxSRadioInitStruct->outputPower = HAL_MRSubG_GetPALeveldBm(); + pxSRadioInitStruct->PADrvMode = LL_MRSubG_GetPADriveMode(); +} + +/** +* @brief Set the Synth word and the Band Select register according to desired base carrier frequency. +* @param lFBase the base carrier frequency expressed in Hz as unsigned word. +* @retval None. +*/ +void HAL_MRSubG_SetFrequencyBase(uint32_t lFBase){ + uint8_t band; + uint8_t synth_int; + uint32_t synth_frac; + uint32_t b_factor; + + assert_param(IS_FREQUENCY_BAND(lFBase)); + + MRSubG_ComputeSynthWord(lFBase, &synth_int, &synth_frac, &band); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->SYNTH_FREQ, MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_SYNTH_INT, synth_int); + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->SYNTH_FREQ, MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_SYNTH_FRAC, synth_frac); + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->ADDITIONAL_CTRL, MR_SUBG_GLOB_DYNAMIC_ADDITIONAL_CTRL_CH_NUM, 0x00); + +#if defined(IS_169MHZ) + b_factor = (20-band)/12; +#else + b_factor = (band/4)-1; +#endif + + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->SYNTH_FREQ, MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_BS, b_factor); +} + +/** +* @brief Return the base carrier frequency. +* @retval uint32_t Base carrier frequency expressed in Hz as unsigned word. +*/ +uint32_t HAL_MRSubG_GetFrequencyBase(void) +{ +#if defined(IS_169MHZ) + uint8_t bs = (READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->SYNTH_FREQ, MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_BS)); + bs = bs?8:20; +#else + uint8_t bs = ((READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->SYNTH_FREQ, MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_BS)+1)*4); +#endif + uint8_t synth_int = READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->SYNTH_FREQ, MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_SYNTH_INT); + uint32_t synth_frac = READ_REG(MR_SUBG_GLOB_DYNAMIC->SYNTH_FREQ) & MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_SYNTH_FRAC; + uint32_t fbase; + + fbase = LL_GetXTALFreq()*((uint64_t)(synth_int*(1<<20) + synth_frac))/(bs*(1<<20)); + + return fbase; +} + +/** +* @brief Set the datarate. +* @param lDatarate datarate expressed in sps. +* @retval None. +*/ +void HAL_MRSubG_SetDatarate(uint32_t lDatarate){ + uint8_t dr_e; + uint16_t dr_m; + + assert_param(IS_DATARATE(lDatarate)); + + /* Calculates the datarate mantissa and exponent */ + MRSubG_SearchDatarateME(lDatarate, &dr_m, &dr_e); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_DATARATE_M, dr_m); + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_DATARATE_E, dr_e); +} + +/** +* @brief Return the datarate. +* @retval uint32_t Datarate expressed in sps. +*/ +uint32_t HAL_MRSubG_GetDatarate(void) +{ + uint32_t dr, datarateM, datarateE; + uint32_t f_sys; + + datarateM = READ_REG(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG) & MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_DATARATE_M; + datarateE = READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_DATARATE_E); + + f_sys = (uint32_t)(LL_GetXTALFreq()/3); + + if (datarateE == 0) + dr = f_sys*datarateM/(uint64_t)1<<32; + else if (datarateE == 15) /* Jitter free mode */ + dr = f_sys/(8*datarateM); + else + dr = f_sys*((uint64_t)(1<<16) + datarateM)*(1<SYNTH_FREQ, MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_BS)); + bs = bs?8:20; +#else + uint8_t bs = ((READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->SYNTH_FREQ, MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_BS)+1)*4); +#endif + + /* Calculates the frequency deviation mantissa and exponent */ + MRSubG_SearchFreqDevME(lFDev, &uFDevM, &uFDevE, bs); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD1_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD1_CONFIG_FDEV_M, uFDevM); + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD1_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD1_CONFIG_FDEV_E, uFDevE); +} + +/** +* @brief Return the frequency deviation. +* @retval uint32_t Frequency deviation value expressed in Hz. +*/ +uint32_t HAL_MRSubG_GetFrequencyDev(void) +{ + uint8_t fdev_m; + uint8_t fdev_e; + uint32_t f_dev; + uint16_t factor1; + uint32_t factor2; + +#if defined(IS_169MHZ) + uint8_t bs = (READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->SYNTH_FREQ, MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_BS)); + bs = bs?8:20; +#else + uint8_t bs = ((READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->SYNTH_FREQ, MR_SUBG_GLOB_DYNAMIC_SYNTH_FREQ_BS)+1)*4); +#endif + + fdev_m = READ_REG(MR_SUBG_GLOB_DYNAMIC->MOD1_CONFIG) & MR_SUBG_GLOB_DYNAMIC_MOD1_CONFIG_FDEV_M; + fdev_e = READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD1_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD1_CONFIG_FDEV_E); + + factor1 = fdev_e==0 ? 0 : 256; + factor2 = fdev_e==0 ? 0 : (fdev_e-1); + + f_dev = (LL_GetXTALFreq()*(uint64_t)((factor1+fdev_m)*(1<<(factor2))*bs/8)/(bs*(1<<19))); + + return f_dev; +} + +/** +* @brief Set the channel filter bandwidth. +* @param lBandwidth channel filter bandwidth expressed in Hz. +* The API will search the most closer value according to a fixed table of channel +* bandwidth values (@ref s_Channel_Filter_Bandwidth). +* To verify the settled channel bandwidth it is possible to use the HAL_MRSubG_GetChannelBW API. +* @retval None. +*/ +void HAL_MRSubG_SetChannelBW(uint32_t lBandwidth) +{ + uint8_t uBwM = 0; + uint8_t uBwE = 0; + uint32_t f_if = 0; + uint32_t if_offset = 0; + uint32_t chf_threshold = 400000; + uint32_t f_dig=LL_GetXTALFreq()/3; + + /* Calculates the channel bandwidth mantissa and exponent */ + MRSubG_SearchChannelBwME(lBandwidth, &uBwM, &uBwE); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD1_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD1_CONFIG_CHFLT_M, uBwM); + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD1_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD1_CONFIG_CHFLT_E, uBwE); + + /* Set IF to 600 kHz, if channel filter requested is greater then CHF threshold */ + if (lBandwidth > chf_threshold){ + SET_BIT(MR_SUBG_GLOB_STATIC->IF_CTRL, MR_SUBG_GLOB_STATIC_IF_CTRL_IF_MODE); + + /* Define f_if */ + f_if = 600; + } + else{ + /* Set antialiasing filter to 684kHz */ + CLEAR_BIT(MR_SUBG_GLOB_STATIC->IF_CTRL, MR_SUBG_GLOB_STATIC_IF_CTRL_IF_MODE); + + /* Define f_if */ + f_if = 300; + } + + if_offset = (((f_if*100)*65536)/f_dig)*10; + + /* Set IF */ +#if defined(IS_169MHZ) + /* WL33xA */ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->IF_CTRL, MR_SUBG_GLOB_STATIC_IF_CTRL_IF_OFFSET_ANA, 0); +#else + /* WL33x */ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->IF_CTRL, MR_SUBG_GLOB_STATIC_IF_CTRL_IF_OFFSET_ANA, if_offset); +#endif + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->IF_CTRL, MR_SUBG_GLOB_STATIC_IF_CTRL_IF_OFFSET_DIG, if_offset); +} + +/** +* @brief Return the channel filter bandwidth. +* @retval uint32_t Channel filter bandwidth expressed in Hz. +*/ +uint32_t HAL_MRSubG_GetChannelBW(void) +{ + uint8_t cm, ce; + + uint32_t fclk = (LL_GetXTALFreq()/3); + uint32_t correction_factor = fclk/16000000; + + cm = READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD1_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD1_CONFIG_CHFLT_M); + ce = READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD1_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD1_CONFIG_CHFLT_E); + + uint8_t index = ce*9 + cm; + return correction_factor*s_Channel_Filter_Bandwidth[index]; +} + +/** +* @brief Set the modulation type. +* @param xModulation modulation to set. +* This parameter shall be of type @ref MRSubGModSelect. +* @param dsssExponent the DSSS spreading exponent. 0 means DSSS disabled. +* @retval None. +*/ +void HAL_MRSubG_SetModulation(MRSubGModSelect xModulation, uint8_t dsssExponent){ + assert_param(IS_MODULATION(xModulation)); + + /* Internal equalizer */ + switch(xModulation){ + case MOD_2GFSK05: + case MOD_4GFSK05: + case MOD_2GFSK1: + case MOD_4GFSK1: + /*In case of gaussian filter, in order to reduce intersymbol interference (ISI), + * we have to set the internal equalizer to 2 symbols */ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->AS_QI_CTRL, MR_SUBG_GLOB_STATIC_AS_QI_CTRL_AS_EQU_CTRL, 0x02); + break; + default: + /* For non gaussian modulation set internal equalizer to 0 symbols */ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->AS_QI_CTRL, MR_SUBG_GLOB_STATIC_AS_QI_CTRL_AS_EQU_CTRL, 0x00); + } + + /* Post filter */ + switch(xModulation){ + case MOD_4GFSK05: + case MOD_4GFSK1: + case MOD_4FSK: + /*In case of 4 level FSK modulation, in order to reduce intersymbol interference (ISI), + * we have to set the post filter len equal to 8 (register value 0). */ + MODIFY_REG_FIELD(MR_SUBG_RADIO->CLKREC_CTRL0, MR_SUBG_RADIO_CLKREC_CTRL0_PSTFLT_LEN, 0x00); + break; + default: + MODIFY_REG_FIELD(MR_SUBG_RADIO->CLKREC_CTRL0, MR_SUBG_RADIO_CLKREC_CTRL0_PSTFLT_LEN, 0x01); + } + + /* Modulation */ + switch(xModulation){ + case MOD_2GFSK05: + case MOD_4GFSK05: + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_BT_SEL, 1); + xModulation &= 0x0F; + break; + default: + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_BT_SEL, 0); + } + + /* Evaluate DSSS settings */ + MRSUBG_EvaluateDSSS(xModulation, dsssExponent); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_MOD_TYPE, xModulation); +} + +/** +* @brief Return the modulation type used. +* @retval MRSubGModSelect Settled modulation type. +*/ +MRSubGModSelect HAL_MRSubG_GetModulation(void) +{ + MRSubGModSelect retMod; + retMod = (MRSubGModSelect)(READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_MOD_TYPE)); + + if(retMod == MOD_2GFSK1 || retMod == MOD_4GFSK1) + { + /* Check the BT_SEL bit to evaluate if xGFSK1 or 05 */ + uint8_t bt = READ_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->MOD0_CONFIG, MR_SUBG_GLOB_DYNAMIC_MOD0_CONFIG_BT_SEL); + + if (bt) { retMod |= 0x10; } + } + + return retMod; +} + +/** + * @brief Return RSSI value in dBm from content of RSSI_LEVEL_ON_SYNC field. + * @retval int32_t RSSI value. + */ +int32_t HAL_MRSubG_GetRssidBm(void) +{ + uint16_t rssiReg = LL_MRSubG_GetRssiLevelOnSync(); + return __HAL_MRSUBG_CONVERT_RSSI_TO_DBM(rssiReg); +} + +/** + * @brief Set the value for RSSI threshold according to the following formula: + * RSSIdBm = (rssi_level_xx/2)-(96+GAIN_RX_CHAIN) - See equation 7 in UM_MR_SubG_IP + * @param rssiTh The desired RSSI threshold in dBm. + * @retval None. + */ +void HAL_MRSubG_SetRSSIThreshold(int16_t rssiTh){ + uint16_t rssiValReg = 2*(rssiTh+(96+GAIN_RX_CHAIN)); + LL_MRSubG_SetRssiThresholdRegister(rssiValReg); +} + +/** + * @brief Get the value for RSSI threshold in dBm + * @retval int32_t the RSSI Threshold in dBm. + */ +int32_t HAL_MRSubG_GetRSSIThreshold(void){ + /* Return RSSI Threshold */ + uint16_t rssiReg = READ_REG(MR_SUBG_GLOB_STATIC->AS_QI_CTRL) & MR_SUBG_GLOB_STATIC_AS_QI_CTRL_RSSI_THR; + return MRSubG_ConvertRssiToDbm(rssiReg); +} + +/** +* @brief Sets a specific PA_LEVEL register, with a value given in dBm. +* @param cIndex PA_LEVEL to set. This parameter shall be in the range [0:7]. +* @param lPowerdBm PA value to write expressed in dBm. +* @param drvMode PA drive modes. +* @retval None. +*/ +void HAL_MRSubG_SetPALeveldBm(uint8_t cIndex, int8_t lPowerdBm, MRSubG_PA_DRVMode drvMode) +{ + int32_t pa03 = 0; + int32_t pa07 = 0; + uint8_t maxAllowedValue; + + SET_BIT(MR_SUBG_GLOB_STATIC->PA_CONFIG, MR_SUBG_GLOB_STATIC_PA_CONFIG_PA_RAMP_ENABLE); + + LL_MRSubG_SetPAMode(PA_LEGACY); + LL_MRSubG_SetPADriveMode(drvMode); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PA_CONFIG, MR_SUBG_GLOB_STATIC_PA_CONFIG_PA_LEVEL_MAX_INDEX, cIndex); + + maxAllowedValue = MRSubG_GetAllowedMaxOutputPower(drvMode); + + if(lPowerdBm > maxAllowedValue){ + lPowerdBm = 0x51; + LL_MRSubG_SetPADegen(ENABLE); + } + else{ + int8_t tmpPow; + tmpPow = MAX_DBM-((maxAllowedValue-lPowerdBm)*2); + + lPowerdBm = tmpPow>0?tmpPow:0; + } + + for (int i=cIndex; i>=0; i--){ + if(i<4) + pa03 |= (int32_t)(lPowerdBm)<<(i*8); + else + pa07 |= (int32_t)(lPowerdBm)<<((i%4)*8); + + lPowerdBm = (lPowerdBm - 10) > 0 ? lPowerdBm - 10 : 0; + } + + WRITE_REG(MR_SUBG_GLOB_STATIC->PA_LEVEL_3_0, pa03); + WRITE_REG(MR_SUBG_GLOB_STATIC->PA_LEVEL_7_4, pa07); +} + +/** +* @brief Returns a value in dBm. +* @retval int32_t Settled power level expressed in dBm. +*/ +int8_t HAL_MRSubG_GetPALeveldBm(void) +{ + int32_t retDbm; + + /* Get the max PA Index */ + uint8_t maxIdx = LL_MRSubG_GetPALevelMaxIndex(); + + if(maxIdx < 4){ + retDbm = READ_REG(MR_SUBG_GLOB_STATIC->PA_LEVEL_3_0) & MR_SUBG_GLOB_STATIC_PA_LEVEL_3_0_PA_LEVEL0; + return retDbm << maxIdx * 8; + } + else { + retDbm = READ_REG(MR_SUBG_GLOB_STATIC->PA_LEVEL_7_4) & MR_SUBG_GLOB_STATIC_PA_LEVEL_7_4_PA_LEVEL4; + return retDbm << (maxIdx%4) * 8; + } +} + +/** + * @brief Returns the number of bytes after each TX/RX transaction. + * @retval The number of bytes after each TX/RX transaction. + */ +uint32_t HAL_MRSubG_GetBytesOfTransaction(void){ + uint16_t used = READ_REG_FIELD(MR_SUBG_GLOB_STATUS->DATABUFFER_INFO, MR_SUBG_GLOB_STATUS_DATABUFFER_INFO_NB_DATABUFFER_USED); + uint16_t size = READ_REG(MR_SUBG_GLOB_STATIC->DATABUFFER_SIZE) & MR_SUBG_GLOB_STATIC_DATABUFFER_SIZE_DATABUFFER_SIZE; + uint16_t count = READ_REG_FIELD(MR_SUBG_GLOB_STATUS->DATABUFFER_INFO, MR_SUBG_GLOB_STATUS_DATABUFFER_INFO_CURRENT_DATABUFFER_COUNT); + + return (used*size)+count; +} + +/* + * @brief Convert microseconds into interpolated absolute time value. SCM_COUNTER must be ready for meaningful results. + * @param microseconds Time in microseconds (integer) + * @retval Time in interpolated absolute time units, can be used for sequencer intervals and timeouts. + */ +uint32_t HAL_MRSubG_Sequencer_Microseconds(uint32_t microseconds) +{ + /* Determine true frequency (relative to 16MHz clock) of "interpolated absolute time" value */ + uint16_t slow_clock_freq = 32000; + uint16_t scm_counter_currval = READ_REG_FIELD(MR_SUBG_GLOB_MISC->SCM_COUNTER_VAL, MR_SUBG_GLOB_MISC_SCM_COUNTER_VAL_SCM_COUNTER_CURRVAL); + if (scm_counter_currval != 0) + slow_clock_freq = 32ull * 16000000ull / scm_counter_currval; + uint64_t interpolated_absolute_time = 16u * slow_clock_freq; + + return (((uint64_t)microseconds) * interpolated_absolute_time / 1000000ull) + 0x20; +} + +/* + * @brief Convert milliseconds into interpolated absolute time value. SCM_COUNTER must be ready for meaningful results. + * @param milliseconds Time in milliseconds (integer) + * @retval Time in interpolated absolute time units, can be used for sequencer intervals and timeouts. + */ +uint32_t HAL_MRSubG_Sequencer_Milliseconds(uint32_t milliseconds) +{ + return HAL_MRSubG_Sequencer_Microseconds(milliseconds * 1000ul); +} + +/* + * @brief Convert seconds into interpolated absolute time value. SCM_COUNTER must be ready for meaningful results. + * @param seconds Time in seconds (integer) + * @retval Time in interpolated absolute time units, can be used for sequencer intervals and timeouts. + */ +uint32_t HAL_MRSubG_Sequencer_Seconds(uint32_t seconds) +{ + return HAL_MRSubG_Sequencer_Microseconds(seconds * 1000000ul); +} + +/* + * @brief Store the current contents of all static SubGHz static configuration registers to + * given global configuration table for sequencer. + * @param cfg Pointer to global configuration table struct. + * @retval SUCCESS if operation was successful, ERROR if RAM table pointer is not word-aligned. + */ +ErrorStatus HAL_MRSubG_Sequencer_ApplyStaticConfig(MRSubG_Sequencer_GlobalConfiguration *cfg) +{ + /* Ensure GlobalConfiguration RAM table is word-aligned */ + if (((uint32_t)cfg) % 4 != 0) + return ERROR; + + memcpy((void*)&cfg->StaticConfigReg, (void*)MR_SUBG_GLOB_STATIC, sizeof(MR_SUBG_GLOB_STATIC_TypeDef)); + + return SUCCESS; +} + +/* + * @brief Store the current contents of all static SubGHz static configuration registers to + * given global configuration table for sequencer. + * @param cfg Pointer to global configuration table struct. + * @param cmd The command (e.g., TX / RX / SABORT) to issue upon execution of this sequencer action. + * @retval SUCCESS if operation was successful, ERROR if RAM table pointer is not word-aligned + * or NextAction1Interval / NextAction2Interval value is invalid. + */ +ErrorStatus HAL_MRSubG_Sequencer_ApplyDynamicConfig(MRSubG_Sequencer_ActionConfiguration *cfg, MRSubGCmd cmd) +{ + /* Ensure ActionConfiguration RAM table is word-aligned */ + if (((uint32_t)cfg) % 4 != 0) + return ERROR; + + /* NextAction1Interval and NextAction2Interval must not be smaller than (SOC_WAKEUP_OFFSET + 2) slow clock cycles */ + uint32_t soc_wakeup_offset = READ_REG_FIELD(MR_SUBG_GLOB_RETAINED->WAKEUP_CTRL, MR_SUBG_GLOB_RETAINED_WAKEUP_CTRL_SOC_WAKEUP_OFFSET); + uint32_t min_next_action_interval = (soc_wakeup_offset + 2) * 16; + if (cfg->NextAction1Interval != 0 && cfg->NextAction1Interval < min_next_action_interval) + return ERROR; + + if (cfg->NextAction2Interval != 0 && cfg->NextAction2Interval < min_next_action_interval) + return ERROR; + + /* Copy current dynamic register configuration to ActionConfiguration block */ + memcpy((void*)&cfg->DynamicConfigReg, (void*)MR_SUBG_GLOB_DYNAMIC, sizeof(MR_SUBG_GLOB_DYNAMIC_TypeDef)); + MODIFY_REG_FIELD(cfg->DynamicConfigReg.COMMAND, MR_SUBG_GLOB_DYNAMIC_COMMAND_COMMAND_ID, cmd); + + return SUCCESS; +} + +/** + * @brief Set the payload length for the Basic packet format. + * @param nPayloadLength payload length in bytes. + * @retval None. + */ +void HAL_MRSubG_PktBasicSetPayloadLength(uint16_t nPayloadLength){ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->DATABUFFER_SIZE, MR_SUBG_GLOB_STATIC_DATABUFFER_SIZE_DATABUFFER_SIZE, nPayloadLength); + LL_MRSUBG_SetPacketLength(nPayloadLength); +} + +/** + * @brief Initialize the STM32WL3 Basic packet according to the specified parameters in the MRSubG_PcktBasicFields struct. + * @param pxPktBasicInit Basic packet init structure. + * This parameter is a pointer to @ref MRSubG_PcktBasicFields. + * @retval None. + */ +void HAL_MRSubG_PacketBasicInit(MRSubG_PcktBasicFields* pxPktBasicInit){ + + /* Check the parameters */ + assert_param(IS_PREAMBLE_LEN(pxPktBasicInit->PreambleLength)); + assert_param(IS_SYNC_LEN(pxPktBasicInit->SyncLength)); + assert_param(IS_FUNCTIONAL_STATE(pxPktBasicInit->DataWhitening)); + + /* Set the Packet Format to Basic Packet */ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_PCKT_FORMAT, PKT_BASIC); + + /* Init the Whitening to 0x1FF */ + LL_MRSubG_PacketHandlerSetWhiteningInit(0x1FF); + + /* Set the SYNC */ + LL_MRSubG_SetSyncPresent(pxPktBasicInit->SyncPresent); + LL_MRSubG_SetSyncLength(pxPktBasicInit->SyncLength); + LL_MRSubG_SetSyncWord(pxPktBasicInit->SyncWord); + LL_MRSubG_SetSecondarySync(DISABLE); + + /* Set the PREAMBLE */ + LL_MRSubG_SetPreambleLength(pxPktBasicInit->PreambleLength); + LL_MRSubG_SetPreambleSeq(pxPktBasicInit->PreambleSequence); + + LL_MRSubG_PacketHandlerWhitening(pxPktBasicInit->DataWhitening); + LL_MRSubG_PacketHandlerCoding(pxPktBasicInit->Coding); + LL_MRSubG_PacketHandlerSetCrcMode(pxPktBasicInit->CrcMode); + MODIFY_REG(MR_SUBG_GLOB_STATIC->CRC_INIT, MR_SUBG_GLOB_STATIC_CRC_INIT_CRC_INIT_VAL, 0xFFFFFFFF); + + /* Set the Fixed or Variable Packet Length mode */ + LL_MRSUBG_SetFixedVariableLength(pxPktBasicInit->FixVarLength); + + /* Set the Packet Length width. Relevant only if FIX_VAR_LEN=1 */ + LL_MRSubG_SetLenWidth(pxPktBasicInit->LengthWidth); + + LL_MRSubG_SetPostambleLength(pxPktBasicInit->PostambleLength); + LL_MRSubG_SetPostamblSeq(pxPktBasicInit->PostambleSequence); +} + +/** + * @brief Initialize the STM32WL3 WMBUS packet according to the specified parameters in the PktWMbusInit struct. + * @param pxPktWMbusInit pointer to a PktWMbusInit structure that contains the configuration information for the specified S2LP WMBUS PACKET FORMAT. + * This parameter is a pointer to @ref MRSubG_WMBUS_PcktFields. + * @retval None. + */ +void HAL_MRSubG_WMBus_PacketInit(MRSubG_WMBUS_PcktFields* pxPktWMbusInit){ + /* Check the parameters */ + assert_param(IS_WMBUS_SUBMODE(pxPktWMbusInit->xWMbusSubmode)); + + /* Set the Packet Format to WMBus Packet and disable HW CRC */ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_PCKT_FORMAT, PKT_BASIC); + LL_MRSubG_PacketHandlerSetCrcMode(PKT_NO_CRC); + + s_cWMbusSubmode = pxPktWMbusInit->xWMbusSubmode; + + if(s_cWMbusSubmode==WMBUS_SUBMODE_S1_S2_LONG_HEADER) { + LL_MRSubG_SetPreambleLength(((uint16_t)pxPktWMbusInit->PreambleLength) + WMBUS_PREAMBLE_LEN_S1S2LONGHEADER); + + /* Set the SYNC */ + LL_MRSubG_SetSyncPresent(ENABLE); + LL_MRSubG_SetSyncLength(WMBUS_SYNC_LEN_S1S2LONGHEADER); + LL_MRSubG_SetSyncWord(WMBUS_SYNCWORD_S1S2LONGHEADER); + + /* Set the Coding type */ + LL_MRSubG_PacketHandlerCoding(CODING_MANCHESTER); + LL_MRSubG_PacketHandlerManchesterType(MANCHESTER_TYPE1); + + LL_MRSubG_SetPostamblSeq(POST_SEQ_1010); + } + else if(s_cWMbusSubmode==WMBUS_SUBMODE_S1_M_S2_T2_OTHER_TO_METER) { + LL_MRSubG_SetPreambleLength(((uint16_t)pxPktWMbusInit->PreambleLength) + WMBUS_PREAMBLE_LEN_S1MS2T2OTHERTOMETER); + + /* Set the SYNC */ + LL_MRSubG_SetSyncPresent(ENABLE); + LL_MRSubG_SetSyncLength(WMBUS_SYNC_LEN_S1MS2T2OTHERTOMETER); + LL_MRSubG_SetSyncWord(WMBUS_SYNCWORD_S1MS2T2OTHERTOMETER); + + /* Set the Coding type */ + LL_MRSubG_PacketHandlerCoding(CODING_MANCHESTER); + + /* Constellation map setting */ + LL_MRSubG_SetConstellationMapping((uint8_t)2); /* See Table 42 of the ref. manual */ + + LL_MRSubG_SetPostamblSeq(POST_SEQ_1010); + } + else if(s_cWMbusSubmode==WMBUS_SUBMODE_T1_T2_METER_TO_OTHER) { + LL_MRSubG_SetPreambleLength(((uint16_t)pxPktWMbusInit->PreambleLength) + WMBUS_PREAMBLE_LEN_T1T2METERTOOTHER); + + /* Set the SYNC */ + LL_MRSubG_SetSyncPresent(ENABLE); + LL_MRSubG_SetSyncLength(WMBUS_SYNC_LEN_T1T2METERTOOTHER); + LL_MRSubG_SetSyncWord(WMBUS_SYNCWORD_T1T2METERTOOTHER); + + /* Set the Coding type */ + LL_MRSubG_PacketHandlerCoding(CODING_3o6); + } + else if(s_cWMbusSubmode==WMBUS_SUBMODE_R2_SHORT_HEADER) { + LL_MRSubG_SetPreambleLength(((uint16_t)pxPktWMbusInit->PreambleLength) + WMBUS_PREAMBLE_LEN_R2); + + /* Set the SYNC */ + LL_MRSubG_SetSyncPresent(ENABLE); + LL_MRSubG_SetSyncLength(WMBUS_SYNC_LEN_R2); + LL_MRSubG_SetSyncWord(WMBUS_SYNCWORD_R2); + + /* Set the Coding type */ + LL_MRSubG_PacketHandlerCoding(CODING_MANCHESTER); + + /* Constellation map setting */ + LL_MRSubG_SetConstellationMapping((uint8_t)2); /* See Table 42 of the ref. manual */ + } + + LL_MRSubG_SetPostambleLength(pxPktWMbusInit->PostambleLength); +} + +/** + * @brief Initialize the STM32WL3 802.15.4 packet according to the specified parameters in the MRSubG_802_15_4_PcktFields struct. + * @param px802_15_4PktInit 802.15.4 packet init structure. + * This parameter is a pointer to @ref MRSubG_802_15_4_PcktFields. + * @retval 1 in case of errors. + */ +void HAL_MRSubG_802_15_4_PacketInit(MRSubG_802_15_4_PcktFields* px802_15_4PktInit){ + + uint32_t const*sync_word_ptr; + uint8_t sync_word_len; + uint16_t preamble_len; + + /* Check the parameters */ + assert_param(IS_MODULATION_15_4G(px802_15_4PktInit->Modulation)); + assert_param(IS_FCS_TYPE(px802_15_4PktInit->FCSType)); + assert_param(IS_PREAMBLE_15_4G_LEN(px802_15_4PktInit->PreambleLength)); + assert_param(IS_FEC_TYPE(px802_15_4PktInit->FecType)); + assert_param(IS_FUNCTIONAL_STATE(px802_15_4PktInit->Whitening)); + assert_param(IS_FRAME_LEN(px802_15_4PktInit->FrameLength)); + + if (px802_15_4PktInit->Modulation == MOD_2FSK) { + sync_word_ptr = SFD_2FSK; + sync_word_len = 2; + preamble_len = px802_15_4PktInit->PreambleLength * 8; + } else { + sync_word_ptr = SFD_4FSK; + sync_word_len = 4; + preamble_len = px802_15_4PktInit->PreambleLength * 16; + } + + /* Init the Whitening to 0x1FF */ + LL_MRSubG_PacketHandlerSetWhiteningInit(0x1FF); + + /* Set the Packet Format to 802.15.4 Packet */ + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_PCKT_FORMAT, PKT_802_15_4); + + WRITE_REG(MR_SUBG_GLOB_STATIC->SYNC, sync_word_ptr[0]); + + WRITE_REG(MR_SUBG_GLOB_STATIC->SEC_SYNC, sync_word_ptr[1]); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_PREAMBLE_SEQ, PRE_SEQ_0101); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_PREAMBLE_LENGTH, preamble_len / 2); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_SYNC_PRESENT, 1); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_SYNC_LEN, SYNC_BYTE(sync_word_len)); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CONFIG, MR_SUBG_GLOB_STATIC_PCKT_CONFIG_CRC_MODE, px802_15_4PktInit->FCSType); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_DYNAMIC->PCKTLEN_CONFIG, MR_SUBG_GLOB_DYNAMIC_PCKTLEN_CONFIG_PCKTLEN, px802_15_4PktInit->FrameLength); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_FCS_TYPE_4G, + (px802_15_4PktInit->FCSType == FCS_16BIT) ? 1: 0); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_FEC_TYPE_4G, (px802_15_4PktInit->FecType > 1 ? 1 : 0)); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_INT_EN_4G, + ((px802_15_4PktInit->FecType == FEC_15_4_G_NRNSC) || (px802_15_4PktInit->FecType == FEC_15_4_G_RSC_Interleaving)) ); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_CODING_SEL, (px802_15_4PktInit->FecType > 0)); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_WHIT_EN, px802_15_4PktInit->Whitening); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_WHIT_BF_FEC, 0); + + MODIFY_REG_FIELD(MR_SUBG_GLOB_STATIC->PCKT_CTRL, MR_SUBG_GLOB_STATIC_PCKT_CTRL_BYTE_SWAP, 1); + + WRITE_REG(MR_SUBG_GLOB_STATIC->CRC_INIT, ((px802_15_4PktInit->FCSType == FCS_16BIT) ? 0 : 0xFFFFFFFF)); +} + +/** + * @brief MRSUBG MSP Init + * @retval None + */ +__weak void HAL_MRSubG_MspInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MRSubG_MspInit could be implemented in the user file + */ +} + +/** + * @brief MRSUBG MSP DeInit + * @retval None + */ +__weak void HAL_MRSubG_MspDeInit(void) +{ + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MRSubG_MspDeInit could be implemented in the user file + */ +} + +__weak void HAL_MRSubG_IRQ_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MRSubG_IRQ_Callback could be implemented in the user file + */ +} + +__weak void HAL_MRSubG_BUSY_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MRSubG_BUSY_Callback could be implemented in the user file + */ +} + +__weak void HAL_MRSubG_TX_RX_SEQUENCE_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MRSubG_TX_RX_SEQUENCE_Callback could be implemented in the user file + */ +} + +__weak void HAL_MRSubG_WKUP_Callback(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MRSubG_WKUP_Callback could be implemented in the user file + */ +} + +void HAL_MRSubG_IRQHandler(void) +{ + HAL_MRSubG_IRQ_Callback(); +} + +void HAL_MRSubG_BUSY_IRQHandler(void) +{ + HAL_MRSubG_BUSY_Callback(); +} + +void HAL_MRSubG_TX_RX_SEQUENCE_IRQHandler(void) +{ + HAL_MRSubG_TX_RX_SEQUENCE_Callback(); +} + +void HAL_MRSubG_WKUP_IRQHandler(void) +{ + HAL_MRSubG_WKUP_Callback(); +} + + +/** + * @} + */ + +#endif /* HAL_MRSUBG_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_mrsubg_timer.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_mrsubg_timer.c new file mode 100644 index 0000000000..5b4454165d --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_mrsubg_timer.c @@ -0,0 +1,925 @@ +/** +****************************************************************************** +* @file stm32wl3x_hal_mrsubg_timer.c +* @author GPM WBL Application Team +* @brief Virtual timer and MRSUBG timer high level APIs +* @details This file implements the software layer that provides the virtualization of the +* resources of a single hardware radio timer in order to allocate many user virtual timers. +* The only constraint to the number of virtual timers is the memory. +* Each instance of a virtual timer is placed in an queue ordered by the expiration time +* and it can be linked to a callback. +* The timer tick is in charge to execute the callback linked to each virtual timer +* and to update the hardware timeout to guarantee the expiration of the next virtual +* timer in the queue. +* A special virtual timer called calibration/anti-wrapping timer is automatically armed +* by the software. This timer can address two tasks: +* - it is in charge to maintain the never wrapping virtual time base. +* - if the slow clock calibration is enabled, it starts the calibration procedure at each +* calibration interval specified during the initialization. +* +* A timer is intended as an event programmed in the future at a certain absolute expiration time +* on a time base. In this implementation the time base grows on 64 bits. Then, it never wraps. +* However, due to hardware timer finite length and in order to maintain the timing coherency, the time base +* must be maintained at least one time before the hardware timer wraps. +* Then even if the slow clock calibration is disabled, the calibration/anti-wrapping timer +* is always active with the only role to maintain the time base and it will expire +* at a rate that depends on the hardware timer capability. +* The time base unit is a STU that is the unit exposed to the user and it is equal to 1 us. +* The calibration/anti-wrapping mechanism is not managed by the user. +* +* This software layer also exposes the possibility to read if a radio timer is programmed. +* + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup MRSUBG_TIMER MRSUBG TIMER + * @{ + */ + +#ifdef HAL_MRSUBG_TIMER_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ + +/** @defgroup MRSUBG_TIMER_Private_Types MRSUBG TIMER Private Types + * @{ + */ + +typedef struct { + VTIMER_HandleType calibrationTimer; + VTIMER_HandleType *rootNode; /*!< First timer of the host timer queue */ + uint8_t enableTimeBase; /*!< Internal flag. User can ignore it*/ + uint8_t expired_count; /*!< Progressive number to indicate expired timers */ + uint8_t served_count; /*!< Progressive number to indicate served expired timers */ + uint8_t stop_notimer_action; /*!< Flag to indicate DEEPSTOP no timer action */ + uint64_t cumulative_time; /** Absolute system time since power up */ + uint32_t hs_startup_time; /** HS startup time in us */ + uint32_t last_scm_counter; /** Number of 16Mhz fast clock cycles seen in a 32 slow clock period window read in the last calibration*/ + uint32_t fast_clock_freq; /** The fast clock frequency is XO frequency / 3 so typically 16MHz. But it can also be 15.666MHz with a XO at 47MHz or 16.666MHz with a XO at 50MHz. */ + uint32_t slow_clock_freq; /** Slow clock freq */ + uint32_t interpolated_freq; /** Interpolated frequency */ + uint32_t last_interpolated_freq; /** Last interpolated frequency */ + uint64_t timer_max_value; /** TIMER_MAX_VALUE in System Time Unit (1us) */ + uint32_t last_calibration_machine_time; /** Last machine time when calibration was performed */ + uint32_t calibration_machine_interval; /** Calibration Interval MTU */ + uint64_t last_system_time; /** Last System Time */ + uint64_t last_calibration_time; /** Absolute system time when last calibration was performed */ + uint8_t calibration_in_progress; /*!< Flag to indicate that a periodic calibration has been started */ + uint8_t close_expiration; /*!< Flag to indicate that a timer is about to expire */ + uint64_t periodicCalibrationInterval; /** Calibration Interval in system time unit (us) */ + uint8_t periodic_calibration; /** Tells whether periodic hardware calibration is needed or not, i.e. LSO speed varies with temperature, etc. */ +} MRSUBG_TIMER_ContextTypeDef; + +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/** @defgroup MRSUBG_Timer_Private_Defines MRSUBG TIMER Private Defines + * @{ + */ + +/* Extra margin to consider before going in low power mode */ +#define LOW_POWER_THR_STU (60) +#define LOW_POWER_THR_MTU (30) + +/* Automatic Calibration interval 5 sec */ +#define FIVE_SECONDS 5000000 +/* Assumed slow clock working frequency to be at 32.768 kHz */ +#define SLOW_CLOCK_WORKING_FREQ 32768 +/* Max attempt number for SCM to exit transitory phase and reach working frequency */ +#define MAX_SCM_DELAY_COUNT 10 +/* ms to wait between SCM reads during transitory phase */ +#define SCM_DELAY_MS 5 + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup MRSUBG_Timer_Private_Macros MRSUBG TIMER Private Macros + * @{ + */ + +#define ATOMIC_SECTION_BEGIN() uint32_t uwPRIMASK_Bit = __get_PRIMASK(); \ + __disable_irq(); \ +/* Must be called in the same scope of ATOMIC_SECTION_BEGIN */ +#define ATOMIC_SECTION_END() __set_PRIMASK(uwPRIMASK_Bit) + +#define MAX(a,b) ((a) < (b) )? (b) : (a) +#define MIN(a,b) ((a) < (b) )? (a) : (b) +#define DIFF8(a,b) ((a)>=(b) ? ((a)-(b)) : (256+((a)-(b)))) +#define TIME_DIFF(a, b) (((int32_t)((a - b) << (32-TIMER_BITS))) >> (32-TIMER_BITS)) +/* This define assumes that a is always greater than b */ +#define TIME_ABSDIFF(a, b) ((a - b) & TIMER_MAX_VALUE) +#define INCREMENT_EXPIRE_COUNT_ISR (MRSUBG_TIMER_Context.expired_count = ((MRSUBG_TIMER_Context.expired_count + 1) == MRSUBG_TIMER_Context.served_count) ? MRSUBG_TIMER_Context.expired_count : (MRSUBG_TIMER_Context.expired_count + 1)) +#define INCREMENT_EXPIRE_COUNT ATOMIC_SECTION_BEGIN(); INCREMENT_EXPIRE_COUNT_ISR ; ATOMIC_SECTION_END(); + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup MRSUBG_Timer_Private_Variables MRSUBG TIMER Private Variables + * @{ + */ +static MRSUBG_TIMER_ContextTypeDef MRSUBG_TIMER_Context; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup MRSUBG_Timer_Private_Constants MRSUBG TIMER Private Constants + * @{ + */ + +/** Margin arging to take for long sleep to allow the + * system to avoid to have the counter wrapping. It is expressed in machine + * time, so it is variable when using internal RO + */ +#define TIMER_WRAPPING_MARGIN (4096) +/** Number of significant bits in the radio timer */ +#define TIMER_BITS (32) +#define TIMER_MAX_VALUE (0xFFFFFFFFU >> (32-TIMER_BITS)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup MRSUBG_Timer_Private_Functions + * @{ + */ +/* Privati Calibration APIs */ +static void _get_calibration_data(void); +static void _timer_calibrate(void); +static void _updateCalibrationData(void); +static void _calibration_callback (void *handle); +static void _update_xtal_startup_time(void); +static void _update_system_time(void); +static uint64_t _us_to_machinetime(uint64_t time); +static uint64_t _machinetime_to_us(uint64_t time); +static uint64_t _get_system_time_and_machine(uint32_t *current_machine_time); +static int32_t _start_timer(VTIMER_HandleType *timerHandle, uint64_t time); +static VTIMER_HandleType *_update_user_timeout(VTIMER_HandleType *rootNode, uint8_t *expired); +static uint32_t VTIMER_SetWakeupTime(uint64_t delay, BOOL allow_sleep); +static VTIMER_HandleType * _insert_timer_in_queue(VTIMER_HandleType *rootNode, VTIMER_HandleType *handle); +static void _virtualTimeBaseEnable(FunctionalState state); +static VTIMER_HandleType * _remove_timer_in_queue(VTIMER_HandleType *rootNode, VTIMER_HandleType *handle); +static VTIMER_HandleType *_check_callbacks(VTIMER_HandleType *rootNode,VTIMER_HandleType **expiredList); + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup MRSUBG_Timer_Exported_Functions MRSUBG Timer Exported Functions + * @{ + */ + +/* ------------------------ RADIO Init APIs ----------------------------------*/ +/** + * @brief Initialize the radio timer module. It must be placed in the initialization + * section of the application. + * @param MRSUBG_TIMER_InitStruct Radio Timer Initialization parameters + * @retval None + */ +void HAL_MRSUBG_TIMER_Init(MRSUBG_TIMER_InitTypeDef *MRSUBG_TIMER_InitStruct) +{ + /* Wait to be sure that the Radio Timer is active */ + while(LL_MRSUBG_TIMER_GetAbsoluteTime(MR_SUBG_GLOB_MISC) < 0x10); + + /* Interrupt Configuration */ + LL_MRSUBG_TIMER_ClearFlag_CPUWakeup(MR_SUBG_GLOB_MISC); + HAL_MRSUBG_TIMER_MspInit(); + + /* HSE XTAL clock frequency */ + MRSUBG_TIMER_Context.fast_clock_freq = MRSUBG_TIMER_InitStruct->HSE_XTAL_freq/3; + + /* Calibration Setting */ + MRSUBG_TIMER_Context.periodic_calibration = (MRSUBG_TIMER_InitStruct->periodicCalibrationInterval!=0); + if (MRSUBG_TIMER_Context.periodic_calibration || MRSUBG_TIMER_InitStruct->enableInitialCalibration) + { + _timer_calibrate(); + } + else + { + /* Assume fix frequency at 32.768 kHz */ + MRSUBG_TIMER_Context.slow_clock_freq = SLOW_CLOCK_WORKING_FREQ; + MRSUBG_TIMER_Context.interpolated_freq = 16u * MRSUBG_TIMER_Context.slow_clock_freq; + MRSUBG_TIMER_Context.last_interpolated_freq = MRSUBG_TIMER_Context.interpolated_freq; + MRSUBG_TIMER_Context.timer_max_value = (((uint64_t)TIMER_MAX_VALUE*1000000ull)/MRSUBG_TIMER_Context.interpolated_freq); + } + if (MRSUBG_TIMER_InitStruct->periodicCalibrationInterval == 0) + { + MRSUBG_TIMER_Context.calibration_machine_interval = TIMER_MAX_VALUE - TIMER_WRAPPING_MARGIN; + } + else + { + MRSUBG_TIMER_Context.calibration_machine_interval = MIN(_us_to_machinetime(MRSUBG_TIMER_InitStruct->periodicCalibrationInterval*1000ull), + (TIMER_MAX_VALUE-TIMER_WRAPPING_MARGIN)); + } + MRSUBG_TIMER_Context.periodicCalibrationInterval = _machinetime_to_us(MRSUBG_TIMER_Context.calibration_machine_interval); + MRSUBG_TIMER_Context.calibration_in_progress = FALSE; + + /* XTAL startup time configuration */ + MRSUBG_TIMER_Context.hs_startup_time = MRSUBG_TIMER_InitStruct->XTAL_StartupTime; + _update_xtal_startup_time(); + + /* Init Radio Timer Context */ + MRSUBG_TIMER_Context.last_calibration_machine_time = LL_MRSUBG_TIMER_GetAbsoluteTime(MR_SUBG_GLOB_MISC); + MRSUBG_TIMER_Context.last_system_time = 0; + MRSUBG_TIMER_Context.last_calibration_time = _machinetime_to_us(MRSUBG_TIMER_Context.last_calibration_machine_time); + MRSUBG_TIMER_Context.cumulative_time = MRSUBG_TIMER_Context.last_calibration_time; + + /* Init the Virtual Timer queue */ + MRSUBG_TIMER_Context.rootNode = NULL; + MRSUBG_TIMER_Context.enableTimeBase = TRUE; + MRSUBG_TIMER_Context.stop_notimer_action = FALSE; + MRSUBG_TIMER_Context.expired_count=0; + MRSUBG_TIMER_Context.served_count=0; + + /* Configure the Calibration callback and schedule the next calibration */ + MRSUBG_TIMER_Context.calibrationTimer.callback = _calibration_callback; + MRSUBG_TIMER_Context.calibrationTimer.userData = NULL; + _start_timer(&MRSUBG_TIMER_Context.calibrationTimer, HAL_MRSUBG_TIMER_GetCurrentSysTime() + MRSUBG_TIMER_Context.periodicCalibrationInterval); +} + +/** + * @brief Timer module state machine. Check and schedule the calibration. + * Check expired timers and execute user callback. + * It must be placed inside the infinite loop. + * @retval None + */ +void HAL_MRSUBG_TIMER_Tick(void) +{ + uint8_t expired = 0; + + /* Check for expired timers */ + while (DIFF8(MRSUBG_TIMER_Context.expired_count, MRSUBG_TIMER_Context.served_count)) + { + VTIMER_HandleType *expiredList, *curr; + uint8_t to_be_served = DIFF8(MRSUBG_TIMER_Context.expired_count, MRSUBG_TIMER_Context.served_count); + + MRSUBG_TIMER_Context.rootNode = _check_callbacks(MRSUBG_TIMER_Context.rootNode, &expiredList); + + /* Call all the user callbacks */ + curr=expiredList; + while (curr != NULL) + { + /* Save next pointer, in case callback start the timer again */ + VTIMER_HandleType *next = curr->next; + curr->active = FALSE; + if (curr->callback) + curr->callback(curr); /* we are sure a callback is set?*/ + curr = next; + } + + MRSUBG_TIMER_Context.rootNode = _update_user_timeout(MRSUBG_TIMER_Context.rootNode, &expired); + if (expired == 1) + { + /* A new root timer is already expired, mimic timer expire */ + INCREMENT_EXPIRE_COUNT; + } + + if (expiredList == NULL) + { + /* Set the close_expiration flag to handle an expired timer later, since its not yet percived as expired by software checks */ + MRSUBG_TIMER_Context.close_expiration = 1; + } + else + { + MRSUBG_TIMER_Context.close_expiration = 0; + } + MRSUBG_TIMER_Context.served_count += to_be_served; + } + + /* Check for periodic calibration */ + if (MRSUBG_TIMER_Context.calibration_in_progress) + { + if(LL_MRSUBG_TIMER_GetSCM(MR_SUBG_GLOB_MISC) != 0) + { + /* Calibration is completed */ + MRSUBG_TIMER_Context.calibration_in_progress = FALSE; + /* Collect calibration data */ + _updateCalibrationData(); + HAL_MRSUBG_TIMER_StopVirtualTimer(&MRSUBG_TIMER_Context.calibrationTimer); + /* Schedule next calibration event */ + _start_timer(&MRSUBG_TIMER_Context.calibrationTimer, HAL_MRSUBG_TIMER_GetCurrentSysTime() + MRSUBG_TIMER_Context.periodicCalibrationInterval); + } + } + /* Make sure no expired timer was left unarmed due to time missalignment */ + if (MRSUBG_TIMER_Context.close_expiration) + { + if((MRSUBG_TIMER_Context.calibrationTimer.expiryTime) < HAL_MRSUBG_TIMER_GetCurrentSysTime()) + { + INCREMENT_EXPIRE_COUNT; + } + else if ((MRSUBG_TIMER_Context.rootNode->expiryTime) < HAL_MRSUBG_TIMER_GetCurrentSysTime()) + { + INCREMENT_EXPIRE_COUNT; + } + } +} + +/** + * @brief Returns the admitted low power mode according to the next timer activity. + * @return Low Power mode + */ +PowerSaveLevels HAL_MRSUBG_TIMER_PowerSaveLevelCheck(void) +{ + uint32_t nextRadioActivity; + uint8_t timerState; + uint32_t hs_startup_machine_time; + PowerSaveLevels level; + + if (((MRSUBG_TIMER_Context.expired_count == MRSUBG_TIMER_Context.served_count) && !MRSUBG_TIMER_Context.calibration_in_progress) == FALSE) + { + return POWER_SAVE_LEVEL_DISABLED; + } + + level = POWER_SAVE_LEVEL_DEEPSTOP_NOTIMER; + + timerState = HAL_MRSUBG_TIMER_GetRadioTimerValue(&nextRadioActivity); + + /*Wakeup timer are programmed only through the timer module*/ + if (timerState == WAKEUP_MRSUBG_TIMER_BUSY) + { + hs_startup_machine_time = _us_to_machinetime(MRSUBG_TIMER_Context.hs_startup_time); + if(TIME_ABSDIFF(nextRadioActivity, LL_MRSUBG_TIMER_GetAbsoluteTime(MR_SUBG_GLOB_MISC)) < (hs_startup_machine_time+LOW_POWER_THR_MTU)) + { + return POWER_SAVE_LEVEL_SLEEP; + } + + level = POWER_SAVE_LEVEL_DEEPSTOP_TIMER; + } + + if(MRSUBG_TIMER_Context.rootNode != NULL && MRSUBG_TIMER_Context.rootNode->active) + { + /* Disable power save if a timer is about to expire */ + if(((MRSUBG_TIMER_Context.rootNode->expiryTime - HAL_MRSUBG_TIMER_GetCurrentSysTime()) < (LOW_POWER_THR_STU + MRSUBG_TIMER_Context.hs_startup_time)*3)|| (MRSUBG_TIMER_Context.close_expiration !=0)) + { + MRSUBG_TIMER_Context.close_expiration = 1; + return POWER_SAVE_LEVEL_DISABLED; + } + + if(level == POWER_SAVE_LEVEL_DEEPSTOP_NOTIMER) + { + if((MRSUBG_TIMER_Context.rootNode->next == NULL) && (MRSUBG_TIMER_Context.rootNode == &MRSUBG_TIMER_Context.calibrationTimer)) + { + MRSUBG_TIMER_Context.stop_notimer_action = TRUE; + _virtualTimeBaseEnable(DISABLE); + LL_MRSUBG_TIMER_DisableCPUWakeupTimer(MR_SUBG_GLOB_RETAINED); + return POWER_SAVE_LEVEL_DEEPSTOP_NOTIMER; + } + } + level = POWER_SAVE_LEVEL_DEEPSTOP_TIMER; + } + + return level; +} + +/* ---------------------- RADIO Activity APIs --------------------------------*/ + +/** + * @brief Return the status of the RFIP Wakeup timer and the last value programmed in the register. + * @param time: return the RFIP Wakeup time. + * @retval 0 if no timer has been programmed. + * @retval 1 if RFIP Wakeup Timer has been programmed. + */ +uint8_t HAL_MRSUBG_TIMER_GetRadioTimerValue(uint32_t *time) +{ + uint8_t status = 0; + + *time = 0; + if(LL_MRSUBG_TIMER_IsEnabledRFIPWakeupTimer(MR_SUBG_GLOB_RETAINED)) + { + *time = LL_MRSUBG_TIMER_GetRFIPWakeupTime(MR_SUBG_GLOB_RETAINED); + status = WAKEUP_MRSUBG_TIMER_BUSY; + } + + return status; +} + +/* ----------------------- Radio Timer time unit APIs ------------------------*/ + +/** + * @brief Translates time in microseconds into machine time units. + * @param time: Microseconds to be converted in MTU + * @return Machine time value + */ +uint64_t HAL_MRSUBG_TIMER_UsToMachinetime(uint64_t time) +{ + return _us_to_machinetime(time); +} + +/** + * @brief Translates time machine time in microseconds. + * @param time: Machine time to be converted in microseconds + * @return Time value in microseconds + */ +uint64_t HAL_MRSUBG_TIMER_MachinetimeToUs(uint64_t time) +{ + return _machinetime_to_us(time); +} + +/** + * @brief This function returns the current reference time expressed in system time units (1us). + * The returned value can be used as absolute time parameter where needed in the other + * HAL_MRSUBG_TIMER* APIs + * @return absolute current time expressed in system time units (1 us). + */ +uint64_t HAL_MRSUBG_TIMER_GetCurrentSysTime(void) +{ + uint32_t current_machine_time; + return _get_system_time_and_machine(¤t_machine_time); +} + +/* -------------------------- Virtual timer APIs ---------------------------- */ + +/** + * @brief Starts a one-shot virtual timer for the given relative timeout value expressed in us + * @param timerHandle: The virtual timer + * @param usRelTimeout: The relative time, from current time, expressed in us + * @retval 0 if the timerHandle is valid. + * @retval 1 if the timerHandle is not valid. It is already started. + */ +uint32_t HAL_MRSUBG_TIMER_StartVirtualTimer(VTIMER_HandleType *timerHandle, uint64_t usRelTimeout) +{ + uint8_t retVal; + retVal = _start_timer(timerHandle, (HAL_MRSUBG_TIMER_GetCurrentSysTime()+usRelTimeout)); + _virtualTimeBaseEnable(ENABLE); + + return retVal; +} + +/** + * @brief Starts a one-shot virtual timer for the given relative timeout value expressed in ms + * @param timerHandle: The virtual timer + * @param msRelTimeout: The relative time, from current time, expressed in ms + * @retval 0 if the timerHandle is valid. + * @retval 1 if the timerHandle is not valid. It is already started. + */ +uint32_t HAL_MRSUBG_TIMER_StartVirtualTimerMs(VTIMER_HandleType *timerHandle, uint32_t msRelTimeout) +{ + uint64_t time = msRelTimeout*1000; + uint8_t retVal; + retVal = _start_timer(timerHandle, (HAL_MRSUBG_TIMER_GetCurrentSysTime()+time)); + _virtualTimeBaseEnable(ENABLE); + + return retVal; +} + +/** + * @brief Stops the one-shot virtual timer specified if found + * @param timerHandle: The virtual timer + * @retval None + */ +void HAL_MRSUBG_TIMER_StopVirtualTimer(VTIMER_HandleType *timerHandle) +{ + VTIMER_HandleType *rootNode = _remove_timer_in_queue(MRSUBG_TIMER_Context.rootNode, timerHandle); + uint8_t expired = 0; + timerHandle->active=FALSE; + if (MRSUBG_TIMER_Context.rootNode != rootNode) + { + MRSUBG_TIMER_Context.rootNode = _update_user_timeout(rootNode, &expired); + if (expired) + { + /* A new root timer is already expired, mimic timer expire */ + INCREMENT_EXPIRE_COUNT; + } + } + else + { + MRSUBG_TIMER_Context.rootNode = rootNode; + } +} + +/** + * @brief Returns the absolute expiry time of a running virtual timer expressed in internal system time units (us). + * @param timerHandle: The virtual timer + * @retval sysTime: Absolute time expressed in internal system time units (us). + */ +uint64_t HAL_MRSUBG_TIMER_ExpiryTime(VTIMER_HandleType *timerHandle) +{ + return timerHandle->expiryTime; +} + +/** + * @brief Virtual timer Timeout Callback. It signals that a host timeout occurred. + * @retval None + */ +void HAL_MRSUBG_TIMER_TimeoutCallback(void) +{ + /* Disable host timer */ + LL_MRSUBG_TIMER_DisableCPUWakeupTimer(MR_SUBG_GLOB_RETAINED); + INCREMENT_EXPIRE_COUNT_ISR; + /* Clear the interrupt */ + LL_MRSUBG_TIMER_ClearFlag_CPUWakeup(MR_SUBG_GLOB_MISC); + LL_MRSUBG_TIMER_IsActiveFlag_CPUWakeup(MR_SUBG_GLOB_MISC); +} + +/** + * @brief Returns the number of timers in the queue. + * @return number of timers in the queue. + */ +uint32_t HAL_MRSUBG_TIMER_GetPendingTimers(void) +{ + VTIMER_HandleType *curr = MRSUBG_TIMER_Context.rootNode; + uint32_t counter = 0; + while (curr != NULL) + { + counter++; + curr = curr->next; + } + return counter; +} + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup MRSUBG_Timer_Private_Functions MRSUBG TIMER Private Functions + * @{ + */ + +static void _get_calibration_data(void) +{ + uint16_t scm_counter_currval; + uint32_t last_interpolated_freq; + + scm_counter_currval = LL_MRSUBG_TIMER_GetSCM(MR_SUBG_GLOB_MISC); + if ((scm_counter_currval != 0) && (scm_counter_currval != MRSUBG_TIMER_Context.last_scm_counter)) + { + MRSUBG_TIMER_Context.slow_clock_freq = ((32ull * (uint64_t)MRSUBG_TIMER_Context.fast_clock_freq * 1000)/scm_counter_currval); + MRSUBG_TIMER_Context.last_scm_counter = scm_counter_currval; + last_interpolated_freq = MRSUBG_TIMER_Context.interpolated_freq; + MRSUBG_TIMER_Context.interpolated_freq = (16u * MRSUBG_TIMER_Context.slow_clock_freq)/1000; + if (last_interpolated_freq == 0) + { + MRSUBG_TIMER_Context.last_interpolated_freq = MRSUBG_TIMER_Context.interpolated_freq; + } + else + { + MRSUBG_TIMER_Context.last_interpolated_freq = last_interpolated_freq; + } + MRSUBG_TIMER_Context.slow_clock_freq /= 1000; + MRSUBG_TIMER_Context.timer_max_value = (((uint64_t)TIMER_MAX_VALUE*1000000ull)/MRSUBG_TIMER_Context.interpolated_freq); + } +} + +static void _timer_calibrate(void) +{ + uint8_t scm_transitory = 0; + /* wait for SCM to leave reset state value */ + while(LL_MRSUBG_TIMER_GetSCM(MR_SUBG_GLOB_MISC) == 0); + /* wait for SCM to reach a stable slow clock value after a transitory startup period */ + while((LL_MRSUBG_TIMER_GetSCM(MR_SUBG_GLOB_MISC) != ((32ull * (uint64_t)MRSUBG_TIMER_Context.fast_clock_freq)/SLOW_CLOCK_WORKING_FREQ)) && (scm_transitory++ < MAX_SCM_DELAY_COUNT)) + { + HAL_Delay(SCM_DELAY_MS); + } + _get_calibration_data(); +} + +static void _update_xtal_startup_time(void) +{ + uint16_t time; + + time= ((MRSUBG_TIMER_Context.hs_startup_time*MRSUBG_TIMER_Context.slow_clock_freq)/1000000ull); + if(time >= 255) + time = 255; + if(time < 16) + time = 20; + + LL_MRSUBG_TIMER_SetWakeupOffset(MR_SUBG_GLOB_RETAINED, (uint8_t)time); +} + +static void _updateCalibrationData(void) +{ + _get_calibration_data(); + _update_xtal_startup_time(); + ATOMIC_SECTION_BEGIN(); + _update_system_time(); + ATOMIC_SECTION_END(); +} + +static void _calibration_callback (void *handle) +{ + MRSUBG_TIMER_Context.calibration_in_progress = TRUE; +} + +static void _update_system_time(void) +{ + uint32_t current_machine_time; + uint64_t new_time; + + current_machine_time = LL_MRSUBG_TIMER_GetAbsoluteTime(MR_SUBG_GLOB_MISC) & TIMER_MAX_VALUE; + new_time = ((uint64_t)TIME_ABSDIFF(current_machine_time, MRSUBG_TIMER_Context.last_calibration_machine_time)*1000000ull)/MRSUBG_TIMER_Context.last_interpolated_freq; + MRSUBG_TIMER_Context.cumulative_time = MRSUBG_TIMER_Context.last_calibration_time + new_time; + + if (TIME_ABSDIFF(current_machine_time, MRSUBG_TIMER_Context.last_calibration_machine_time) < MRSUBG_TIMER_Context.calibration_machine_interval) + { + if (MRSUBG_TIMER_Context.periodic_calibration == 0) + { + /* When accounting for slow clock frequency oscillations over time: + * In wrap around conditions of the HW timer, timer_max_value + * added to the cumulative time needs to be calculated using + * last_interpolated_freq, used until this calibration cycle. + */ + MRSUBG_TIMER_Context.cumulative_time += (((uint64_t)TIMER_MAX_VALUE*1000000ull)/MRSUBG_TIMER_Context.last_interpolated_freq); + } + else + { + /* Account for elapsed time when periodic_calibrations are set & a wraparound of the register occurs */ + MRSUBG_TIMER_Context.cumulative_time += MRSUBG_TIMER_Context.periodicCalibrationInterval; + } + } + MRSUBG_TIMER_Context.last_calibration_machine_time = current_machine_time; + MRSUBG_TIMER_Context.last_calibration_time = MRSUBG_TIMER_Context.cumulative_time; + MRSUBG_TIMER_Context.last_interpolated_freq = MRSUBG_TIMER_Context.interpolated_freq; + /* When accounting for slow clock frequency oscillations over time: + * periodicCalibrationInterval (used as timeout for the next calibration cycle) + * has to be calculated dynamically using the current frequency value. + */ + MRSUBG_TIMER_Context.periodicCalibrationInterval = _machinetime_to_us(MRSUBG_TIMER_Context.calibration_machine_interval); +} + +static uint64_t _us_to_machinetime(uint64_t time) +{ + return ((uint64_t)(time * MRSUBG_TIMER_Context.interpolated_freq) / 1000000ull); +} + +static uint64_t _machinetime_to_us(uint64_t time) +{ + return ((time*1000000ull)/MRSUBG_TIMER_Context.interpolated_freq); +} + +static uint64_t _get_system_time_and_machine(uint32_t *current_machine_time) +{ + uint64_t new_time; + + ATOMIC_SECTION_BEGIN(); + *current_machine_time = LL_MRSUBG_TIMER_GetAbsoluteTime(MR_SUBG_GLOB_MISC); + new_time = ((uint64_t)TIME_ABSDIFF(*current_machine_time, MRSUBG_TIMER_Context.last_calibration_machine_time)*1000000ull) / MRSUBG_TIMER_Context.interpolated_freq; + new_time += MRSUBG_TIMER_Context.cumulative_time; + if (new_time < MRSUBG_TIMER_Context.last_system_time) { + new_time += MRSUBG_TIMER_Context.timer_max_value; + } + MRSUBG_TIMER_Context.last_system_time = new_time; + + ATOMIC_SECTION_END(); + + return new_time; +} + +static int32_t _start_timer(VTIMER_HandleType *timerHandle, uint64_t time) +{ + uint8_t expired = 0; + + /* The timer is already started*/ + if(timerHandle->active) + { + return 1; + } + timerHandle->expiryTime = time; + timerHandle->active = TRUE; + if (_insert_timer_in_queue(MRSUBG_TIMER_Context.rootNode, timerHandle) == timerHandle) + { + MRSUBG_TIMER_Context.rootNode = _update_user_timeout(timerHandle, &expired); + if (expired) + { + /* A new root timer is already expired, mimic timer expire that is normally signaled + through the interrupt handler that increase the number of expired timers*/ + INCREMENT_EXPIRE_COUNT; + } + } + return expired; +} + +/* Set timeout and skip non active timers */ +static VTIMER_HandleType *_update_user_timeout(VTIMER_HandleType *rootNode, uint8_t *expired) +{ + VTIMER_HandleType *curr = rootNode; + VTIMER_HandleType *rootOrig = rootNode; + int64_t delay; + *expired = 0; + while (curr != NULL) + { + if (curr->active) { + ATOMIC_SECTION_BEGIN(); + delay = curr->expiryTime-HAL_MRSUBG_TIMER_GetCurrentSysTime(); + if (delay > 0) + { + /* Protection against interrupt must be used to avoid that the called function will be interrupted + and so the timer programming will happen after the target time is already passed + leading to a timer expiring after timer wraps, instead of the expected delay */ + VTIMER_SetWakeupTime(delay, TRUE); + } + else + { + *expired = 1; + } + ATOMIC_SECTION_END(); + break; + } + curr=curr->next; + } + if (*expired) + return rootOrig; + + return curr; +} + +static uint32_t VTIMER_SetWakeupTime(uint64_t delay, BOOL allow_sleep) +{ + uint32_t current_time; + uint32_t delay_mtu; + + delay_mtu = _us_to_machinetime(delay); + /* If the delay is too small round to minimum 2 tick */ + delay_mtu = MAX(32,delay_mtu); + current_time = LL_MRSUBG_TIMER_GetAbsoluteTime(MR_SUBG_GLOB_MISC); + /* 4 least significant bits are not taken into account. Then let's round the value */ + LL_MRSUBG_TIMER_SetCPUWakeupTime(MR_SUBG_GLOB_RETAINED, ((current_time + (delay_mtu + 8)) & TIMER_MAX_VALUE)); + LL_MRSUBG_TIMER_EnableCPUWakeupTimer(MR_SUBG_GLOB_RETAINED); + + return current_time; +} + +static VTIMER_HandleType * _insert_timer_in_queue(VTIMER_HandleType *rootNode, VTIMER_HandleType *handle) +{ + VTIMER_HandleType *current = rootNode; + VTIMER_HandleType *prev = NULL; + VTIMER_HandleType *returnValue = rootNode; + + while ((current!=NULL) && (current->expiryTime < handle->expiryTime)) + { + prev = current; + current=current->next; + } + + handle->next = current; + + if (prev == NULL) + { + /* We are the new root */ + returnValue = handle; + } + else + { + prev->next = handle; + } + + return returnValue; +} + +static void _virtualTimeBaseEnable(FunctionalState state) +{ + if(state != DISABLE) + { + if (MRSUBG_TIMER_Context.enableTimeBase == FALSE) + { + _calibration_callback(&MRSUBG_TIMER_Context.calibrationTimer); + MRSUBG_TIMER_Context.enableTimeBase = TRUE; + } + } + else + { + HAL_MRSUBG_TIMER_StopVirtualTimer(&MRSUBG_TIMER_Context.calibrationTimer); + MRSUBG_TIMER_Context.enableTimeBase = FALSE; + } +} + +static VTIMER_HandleType * _remove_timer_in_queue(VTIMER_HandleType *rootNode, VTIMER_HandleType *handle) +{ + VTIMER_HandleType *current = rootNode; + VTIMER_HandleType *prev = NULL; + VTIMER_HandleType *returnValue = rootNode; + + while ((current!=NULL) && (current != handle)) { + prev = current; + current=current->next; + } + + if (current == NULL) { + /* Not found */ + } + else if (current == rootNode) { + /* New root node */ + returnValue = current->next; + } + else { + prev->next = current->next; + } + + return returnValue; +} + +/* Check the number of expired timer from rootNode (ordered list of timers) and return the list of expired timers */ +static VTIMER_HandleType *_check_callbacks(VTIMER_HandleType *rootNode,VTIMER_HandleType **expiredList) +{ + + VTIMER_HandleType *curr = rootNode; + VTIMER_HandleType *prev = NULL; + VTIMER_HandleType *returnValue = rootNode; + *expiredList = rootNode; + + int64_t delay; + uint32_t expiredCount = 0; + + while (curr != NULL) { + + if (curr->active) { + delay = curr->expiryTime - HAL_MRSUBG_TIMER_GetCurrentSysTime(); + + if (delay > 5) { + /* End of expired timers list */ + break; + } + } + + prev = curr; + curr=curr->next; + expiredCount++; + } + + if (expiredCount) { + /* Some timers expired */ + prev->next=NULL; + returnValue = curr; + } + else { + /* No timer expired */ + *expiredList = NULL; + } + + return returnValue; +} + +/** + * @brief MRSUBG TIMER MSP Init + * @retval None + */ +__weak void HAL_MRSUBG_TIMER_MspInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MRSUBG_TIMER_MspInit could be implemented in the user file + */ +} + +/** + * @brief MRSUBG TIMER MSP DeInit + * @retval None + */ +__weak void HAL_MRSUBG_TIMER_MspDeInit(void) +{ + + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MRSubG_MspDeInit could be implemented in the user file + */ +} + +__weak void HAL_MRSUBG_TIMER_CPU_WKUP_Callback(void) +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_MRSUBG_TIMER_CPU_WKUP_Callback() can be implemented in the user file + */ +} + +void HAL_MRSUBG_TIMER_CPU_WKUP_IRQHandler(void) +{ + HAL_MRSUBG_TIMER_CPU_WKUP_Callback(); +} + +/** + * @} + */ + +#endif /* HAL_MRSUBG_TIMER_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_msp_template.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_msp_template.c new file mode 100644 index 0000000000..2a2af4f95f --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_msp_template.c @@ -0,0 +1,98 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_msp_template.c + * @author MCD Application Team + * @brief This file contains the HAL System and Peripheral (PPP) MSP initialization + * and de-initialization functions. + * It should be copied to the application folder and renamed into 'stm32wl3x_hal_msp.c'. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup HAL_MSP HAL MSP + * @brief HAL MSP module. + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup HAL_MSP_Private_Functions HAL MSP Private Functions + * @{ + */ + +/** + * @brief Initializes the Global MSP. + * @note This function is called from HAL_Init() function to perform system + * level initialization (GPIOs, clock, DMA, interrupt). + * @retval None + */ +void HAL_MspInit(void) +{ + +} + +/** + * @brief DeInitializes the Global MSP. + * @note This functiona is called from HAL_DeInit() function to perform system + * level de-initialization (GPIOs, clock, DMA, interrupt). + * @retval None + */ +void HAL_MspDeInit(void) +{ + +} + +/** + * @brief Initializes the PPP MSP. + * @note This functiona is called from HAL_PPP_Init() function to perform + * peripheral(PPP) system level initialization (GPIOs, clock, DMA, interrupt) + * @retval None + */ +void HAL_PPP_MspInit(void) +{ + +} + +/** + * @brief DeInitializes the PPP MSP. + * @note This functiona is called from HAL_PPP_DeInit() function to perform + * peripheral(PPP) system level de-initialization (GPIOs, clock, DMA, interrupt) + * @retval None + */ +void HAL_PPP_MspDeInit(void) +{ + +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_pwr.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_pwr.c new file mode 100644 index 0000000000..8d0fd7b3ed --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_pwr.c @@ -0,0 +1,508 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_pwr.c + * @author MCD Application Team + * @brief PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Power Voltage Detector functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup PWR_Private_Defines + * @{ + */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_Exported_Functions PWR Exported Functions + * @{ + */ + +/** @addtogroup PWR_Exported_Functions_Group Peripheral Control functions + * @brief Low Power modes configuration functions + * +@verbatim + + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + + ============================================================================== + ##### PWR peripheral overview ##### + ============================================================================== + [..] + (#) The Power control (PWR) provides an overview of the supply architecture + for the different power domains and of the supply configuration + controller. + + (#) Every entity has low power mode as described below : + (#) The CPU low power modes are : + (+) CPU CRun. + (+) CPU Sleep WFI. + (+) CPU DeepSleep. + (#) The Core low power modes are : + (+) Run. + (+) Sleep. + (+) DEEPSTOP with with retention and low speed clock enabled. + (+) DEEPSTOP with with retention and low speed clock disabled. + (+) Shutdown. + + [..] + *** PVD configuration *** + ========================= + [..] + (+) The PVD is used to monitor the VDD power supply by comparing it to a + threshold selected by the PVD Level (PVDLS[2:0] bits in PWR_CR2 register). + (+) PVDO flag is available to indicate when VDD is lower + than the PVD threshold. This event can generate an interrupt if enabled. + This is done through __HAL_PVD_ENABLE_IT() macro. + (+) The PVD is stopped in Shutdown mode. + + *** Wake-up pin configuration *** + ================================= + [..] + (+) Wake-up pin is used to wake up the system from DEEPSTOP mode. + The pin selection is configurable through the IEWU, EWUA and EWB + registers to map signal to wake up pin line. + The pin polarity is configurable through the IWUP, WUPA and WUPB + registers to be active on rising or falling edges. + + (+) Refer the user manual to know which wake-up lines are present in the + device family. + + (+) When a wakeup pin event is received the appropriate flag is set in + the IWUF, WUFA and WUFB registers. + Then the wakeup pin flag will be cleared and the IOs user + callback will be called. + The user can add his own code by customization of this function + HAL_PWR_WKUPx_Callback. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the voltage threshold detected by the Power Voltage Detector (PVD). + * @param sConfigPVD pointer to a PWR_PVDTypeDef structure that contains the PVD + * configuration information. + * @note Refer to the electrical characteristics of your device datasheet for + * more details about the voltage thresholds corresponding to each + * detection level. + * @retval None + */ +HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) +{ + /* Check the parameters */ + assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); + assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); + + /* Set PVDLS bits according to PVDLevel value */ + LL_PWR_SetPVDLevel(sConfigPVD->PVDLevel); + + /* Clear any previous config. Keep it clear if IT mode is selected */ + __HAL_PWR_PVD_DISABLE_IT(); + + /* Configure interrupt mode */ + if ((sConfigPVD->Mode & PWR_PVD_MODE_IT) == PWR_PVD_MODE_IT) + { + __HAL_PWR_PVD_ENABLE_IT(); + } + + return HAL_OK; +} + +/** + * @brief Enables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_EnablePVD(void) +{ + /* Enable the power voltage detector */ + SET_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief Disables the Power Voltage Detector(PVD). + * @retval None + */ +void HAL_PWR_DisablePVD(void) +{ + /* Disable the power voltage detector */ + CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE); +} + +/** + * @brief PWR PVD interrupt callback + * @retval None + */ +__weak void HAL_PWR_PVDCallback(void) +{ + /* NOTE : This function should not be modified; when the callback is needed, + the HAL_PWR_PVDCallback can be implemented in the user file + */ +} + +/** + * @brief Enable the wake up line functionality. + * @note Wake up lines are used to wake up the system from DEEPSTOP. + * The polarity is applied only for the IOs source line and the wakeup + * event are only edge detection, not level detection. + * @param WakeUpPort : Specifies which wake up IO port configure. This parameter + * can be one value of @ref PWR_WAKEUP_SOURCE_PORT. + * @param WakeUpPin : Specifies which wake up line to enable. This parameter + * can be a combination of @ref PWR_WAKEUP_SOURCE define + * group where every param select the wake up line + * @param WakeUpPolarity : Specifies the polarity of the wake up pin source. + * This parameter is applied only for the IOs source and + * can be a value of @ref PWR_WAKEUP_POLARITY. + * @retval None. + */ +void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPort, uint32_t WakeUpPin, uint32_t WakeUpPolarity) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_SOURCE(WakeUpPin)); + assert_param(IS_PWR_WAKEUP_POLARITY(WakeUpPolarity)); + + /* Specifies the wake up line polarity for the event detection (rising or falling edge) */ + if (WakeUpPolarity == PWR_WUP_FALLEDG) + { + LL_PWR_SetWakeUpPinPolarityLow(WakeUpPort, WakeUpPin); + } + else + { + LL_PWR_SetWakeUpPinPolarityHigh(WakeUpPort, WakeUpPin); + } + /* Enable wake-up line */ + LL_PWR_EnableWakeUpPin(WakeUpPort, WakeUpPin); +} + +/** + * @brief Disable the wake up line functionality. + * @param WakeUpPort : IO port to get out of DEEPSTOP mode. This parameter can be one of the following values: + * @arg @ref PWR_WAKEUP_PORTA + * @arg @ref PWR_WAKEUP_PORTB + * @param WakeUpPin : Specifies the wake up line to disable. + * This parameter can be a combination of @ref PWR_WAKEUP_SOURCE define group + * @retval None + */ +void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPort, uint32_t WakeUpPin) +{ + /* Reset the wake up line polarity to the default value */ + LL_PWR_SetWakeUpPinPolarityHigh(WakeUpPort, WakeUpPin); + + /* Disable wake-up line */ + LL_PWR_DisableWakeUpPin(WakeUpPort, WakeUpPin); +} + +/** + * @brief Get and Clear Wake-up source. + * @param WakeUpPort : IO port to get out of DEEPSTOP mode. This parameter can be one of the following values: + * @arg @ref PWR_WAKEUP_PORTA + * @arg @ref PWR_WAKEUP_PORTB + * @retval WakeUpPin : This parameter can be a combination of + * @ref PWR_WAKEUP_SOURCE define group + */ +uint32_t HAL_PWR_GetClearWakeupSource(uint32_t WakeUpPort) +{ + uint32_t wakeuppin; + + /* Get all wake-up pins */ + wakeuppin = LL_PWR_GetWakeupSource(WakeUpPort); + + /* Clear all the wake-up pin flags */ + LL_PWR_ClearWakeupSource(WakeUpPort, wakeuppin); + + return wakeuppin; +} + +/** + * @brief Enter the CPU in Sleep mode. + * @note In Sleep mode, all I/O pins keep the same state as in Run mode. + * @note CPU clock is off and all peripherals including Cortex-M0+ core such + * as NVIC and SysTick can run and wake up the CPU when an interrupt + * or an event occurs. + * @retval None. + */ +void HAL_PWR_EnterSLEEPMode(void) +{ + /* Clear SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Wait For Interrupt Request */ + __WFI(); + +} + +/** + * @brief Configures the system to allow the DEEPSTOP mode. + * @param sConfigDEEPSTOP : Pointer to a @ref PWR_DEEPSTOPTypeDef structure that + * contains the DEEPSTOP configuration information. + * @retval None. + */ +HAL_StatusTypeDef HAL_PWR_ConfigDEEPSTOP(PWR_DEEPSTOPTypeDef *sConfigDEEPSTOP) +{ + /* Disable the low speed clock if requested */ + if (sConfigDEEPSTOP->deepStopMode == PWR_DEEPSTOP_WITH_SLOW_CLOCK_OFF) + { + LL_RCC_LSE_Disable(); + LL_RCC_LSI_Disable(); + } + + /* Enable the GPIO retention in DEEPSTOP configuration */ + LL_PWR_EnableGPIORET(); + + /* Disable DIRECT HSE configuration to allow DEEPSTOP request */ + if (LL_RCC_DIRECT_HSE_IsEnabled()) + { + LL_RCC_DIRECT_HSE_Disable(); + } + + /* Wait until the low speed clock if OFF */ + if (sConfigDEEPSTOP->deepStopMode == PWR_DEEPSTOP_WITH_SLOW_CLOCK_OFF) + { + while (LL_RCC_LSE_IsReady() || LL_RCC_LSI_IsReady()) {} + } + + return HAL_OK; +} + +/** + * @brief Enter the whole system in DEEPSTOP mode. + * @note The DEEPSTOP is the only low power mode of the device allowing to + * restart from a saved context environment and go on running + * the application at wakeup. + * @note CPU clock and bus clocks are stopped, the VDD12i power domain is + * switched off, the VDD12o power domain is ON and supplied at 1.0V. + * All the RAM banks are retained (by configuration in SystemInit()). + * The slow clock can be running or stopped, depending on the software + * configuration. + * All the register content is lost. Only few peripheral can save + * the setting if configured like wake up source. + * @retval None. + */ +void HAL_PWR_EnterDEEPSTOPMode(void) +{ + /* Clear all the wake-up pin flags */ + LL_PWR_ClearInternalWakeupSource(LL_PWR_WAKEUP_ALL); + LL_PWR_ClearWakeupSource(PWR_WAKEUP_PORTA, LL_PWR_WAKEUP_ALL); + LL_PWR_ClearWakeupSource(PWR_WAKEUP_PORTB, LL_PWR_WAKEUP_ALL); + + /* Enable the device DEEPSTOP configuration */ + MODIFY_REG_FIELD(PWR->CR1, PWR_CR1_LPMS, PWR_MODE_DEEPSTOP); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Wait for Interrupt Request to enter in DEEPSTOP */ + __WFI(); +} + +/** + * @brief Configures the system to allow the SHUTDOWN mode. + * @param sConfigSHUTDOWN : Pointer to a @ref PWR_SHUTDOWNTypeDef structure that + * contains the SHUTDOWN configuration information. + * @retval None. + */ +HAL_StatusTypeDef HAL_PWR_ConfigSHUTDOWN(PWR_SHUTDOWNTypeDef *sConfigSHUTDOWN) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_POLARITY(sConfigSHUTDOWN->WakeUpPol)); + + /* BOR configuration during Shutdown mode */ + if (sConfigSHUTDOWN->BORStatus == ENABLE) + { + LL_PWR_EnableBORinSDN(); + } + else + { + LL_PWR_DisableBORinSDN(); + } + + if (sConfigSHUTDOWN->WakeUpPinStatus == ENABLE) + { + LL_PWR_IOWakeupPolaritySDN(sConfigSHUTDOWN->WakeUpPol); + LL_PWR_EnableIOWakeupSDN(); + } + else + { + LL_PWR_DisableIOWakeupSDN(); + } + +#if defined(PWR_CR2_GPIORET) + /* Enable the GPIO retention in shutdown configuration */ + LL_PWR_EnableGPIORET(); +#endif /* PWR_CR2_GPIORET */ + + /* Disable DIRECT HSE configuration to allow shutdown request */ + if (LL_RCC_DIRECT_HSE_IsEnabled()) + { + LL_RCC_DIRECT_HSE_Disable(); + } + + return HAL_OK; +} + +/** + * @brief Indicate SLEEP-ON-EXIT feature when returning from handler mode to + * thread mode. + * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor re-enters Sleep mode when an interruption handling is over. + * Setting this bit is useful when the processor is expected to run + * only on interruptions handling. + * @retval None. + */ +void HAL_PWR_EnableSleepOnExit(void) +{ + /* Set SLEEPONEXIT bit of Cortex-M0+ System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Disable SLEEP-ON-EXIT feature when returning from handler mode to + * thread mode. + * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the + * processor re-enters Sleep mode when an interruption handling is over. + * @retval None. + */ +void HAL_PWR_DisableSleepOnExit(void) +{ + /* Clear SLEEPONEXIT bit of Cortex-M0+ System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SLEEPONEXIT_Msk); +} + +/** + * @brief Enable CORTEX SEV-ON-PEND feature. + * @note Sets SEVONPEND bit of SCR register. When this bit is set, any + * pending event / interrupt even if it's disabled or has insufficient + * priority to cause exception entry wakes up the Cortex-M0+. + * @retval None. + */ +void HAL_PWR_EnableSEVOnPend(void) +{ + /* Set SEVONPEND bit of Cortex-M0+ System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @brief Disable CORTEX SEVONPEND feature. + * @note Resets SEVONPEND bit of SCR register. When this bit is reset, only + * enabled pending causes exception entry wakes up the Cortex-M0+. + * @retval None. + */ +void HAL_PWR_DisableSEVOnPend(void) +{ + /* Clear SEVONPEND bit of Cortex-M0+ System Control Register */ + CLEAR_BIT(SCB->SCR, SCB_SCR_SEVONPEND_Msk); +} + +/** + * @brief This function handles the PWR PVD interrupt request. + * @note This API should be called under the PVD_IRQHandler(). + * @retval None. + */ +void HAL_PWR_PVD_IRQHandler(void) +{ + /* Check PWR flag */ + if (__HAL_PWR_PVD_GET_FLAG() != 0U) + { + /* PWR PVD interrupt user callback */ + HAL_PWR_PVDCallback(); + + /* Clear PVD exti pending bit */ + __HAL_PWR_PVD_CLEAR_FLAG(); + } +} + +/** + * @brief This function handles the PWR WAKEUP interrupt request. + * @retval None. + */ +void HAL_PWR_WKUP_IRQHandler(void) +{ + uint32_t wakeuppin; + + /* IO Wakeup Source PortA */ + wakeuppin = LL_PWR_GetWakeupSource(LL_PWR_WAKEUP_PORTA); + + /* Wakeup pin line interrupt detected */ + if (wakeuppin != 0) + { + HAL_PWR_WKUPx_Callback(PWR_WAKEUP_PORTA, wakeuppin); + } + + /* IO Wakeup Source PortB */ + wakeuppin = LL_PWR_GetWakeupSource(LL_PWR_WAKEUP_PORTB); + + /* Wakeup pin line interrupt detected */ + if (wakeuppin != 0) + { + HAL_PWR_WKUPx_Callback(PWR_WAKEUP_PORTB, wakeuppin); + } + +} + +/** + * @brief PWR WKUPx interrupt callback. + * @param wakeupPort wakeup PORT + * @param wakeupIOs IO wakeup line + * @retval None. + */ +__weak void HAL_PWR_WKUPx_Callback(uint32_t wakeupPort, uint32_t wakeupIOs) + +{ + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PWR_WKUPxCallback can be implemented in the user file + */ +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_pwr_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_pwr_ex.c new file mode 100644 index 0000000000..1623831c5c --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_pwr_ex.c @@ -0,0 +1,509 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_pwr_ex.c + * @author MCD Application Team + * @brief Extended PWR HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Power Controller (PWR) peripheral: + * + Extended Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup PWREx + * @{ + */ + +#ifdef HAL_PWR_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions + * @{ + */ + +/** + * @brief Enable IO pull-up state in DeepStop and Shutdown modes. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A, PWR_GPIO_B + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 or the logical OR + * of several of them to setseveral bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PUCRA, GPIONumber); + CLEAR_BIT(PWR->PDCRA, GPIONumber); + break; + case PWR_GPIO_B: + SET_BIT(PWR->PUCRB, GPIONumber); + CLEAR_BIT(PWR->PDCRB, GPIONumber); + break; + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Disable IO pull-up state in DeepStop mode and Shutdown modes. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A, PWR_GPIO_B + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 + * or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PUCRA, GPIONumber); + break; + case PWR_GPIO_B: + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Enable GPIO pull-down state in DeepStop and Shutdown modes. + * @note Set the relevant PDy bits of PWR_PDCRx register to configure the I/O in + * pull-down state in DeepStop and Shutdown modes. + * @note This state is effective in DeepStop and Shutdown modes only if APC bit + * is set through HAL_PWREx_EnablePullUpPullDownConfig() API. + * @note The configuration is lost when exiting the Shutdown mode due to the + * power-on reset, maintained when exiting the DeepStop mode. + * @note To avoid any conflict at DeepStop and Shutdown modes exits, the corresponding + * PUy bit of PWR_PUCRx register is cleared unless it is reserved. + * @note Even if a PDy bit to set is reserved, the other PDy bits entered as input + * parameter at the same time are set. + * @param GPIO Specify the IO port. This parameter can be PWR_GPIO_A, PWR_GPIO_B + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 + * or the logical OR of several of them to set + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + SET_BIT(PWR->PDCRA, GPIONumber); + CLEAR_BIT(PWR->PUCRA, GPIONumber); + break; + case PWR_GPIO_B: + SET_BIT(PWR->PDCRB, GPIONumber); + CLEAR_BIT(PWR->PUCRB, GPIONumber); + break; + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Disable GPIO pull-down state in DeepStop and Shutdown modes. + * @note Reset the relevant PDy bits of PWR_PDCRx register used to configure the I/O + * in pull-down state in DeepStop and Shutdown modes. + * @note Even if a PDy bit to reset is reserved, the other PDy bits entered as input + * parameter at the same time are reset. + * @param GPIO Specifies the IO port. This parameter can be PWR_GPIO_A, PWR_GPIO_B + * to select the GPIO peripheral. + * @param GPIONumber Specify the I/O pins numbers. + * This parameter can be one of the following values: + * PWR_GPIO_BIT_0, ..., PWR_GPIO_BIT_15 + * or the logical OR of several of them to reset + * several bits for a given port in a single API call. + * @retval HAL Status + */ +HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber) +{ + HAL_StatusTypeDef status = HAL_OK; + + assert_param(IS_PWR_GPIO(GPIO)); + assert_param(IS_PWR_GPIO_BIT_NUMBER(GPIONumber)); + + switch (GPIO) + { + case PWR_GPIO_A: + CLEAR_BIT(PWR->PDCRA, GPIONumber); + break; + case PWR_GPIO_B: + CLEAR_BIT(PWR->PDCRB, GPIONumber); + break; + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Enable pull-up and pull-down configuration. + * @note When APC bit is set, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are applied in DeepStop and Shutdown modes. + * @note Pull-up set by PUy bit of PWR_PUCRx register is not activated if the corresponding + * PDy bit of PWR_PDCRx register is also set (pull-down configuration priority is higher). + * HAL_PWREx_EnableGPIOPullUp() and HAL_PWREx_EnableGPIOPullDown() API's ensure there + * is no conflict when setting PUy or PDy bit. + * @retval None + */ +void HAL_PWREx_EnablePullUpPullDownConfig() +{ + SET_BIT(PWR->CR1, PWR_CR1_APC); +} + +/** + * @brief Disable pull-up and pull-down configuration. + * @note When APC bit is cleared, the I/O pull-up and pull-down configurations defined in + * PWR_PUCRx and PWR_PDCRx registers are not applied in DeepStop and Shutdown modes. + * @retval None + */ +void HAL_PWREx_DisablePullUpPullDownConfig() +{ + CLEAR_BIT(PWR->CR1, PWR_CR1_APC); +} + +/** + * @brief Enable the wake up line functionality. + * @note Wake up lines are used to wake up the system from DEEPSTOP. + * The polarity is applied only for the IOs source line and the wakeup + * event are only edge detection, not level detection. + * @param WakeUpPeripheral : Specifies which wake up peripheral to + * enable. This parameter can be a combination of: + * @arg @ref PWR_WAKEUP_LPAWUR + * @arg @ref PWR_WAKEUP_SUBG + * @arg @ref PWR_WAKEUP_SUBGHOST + * @arg @ref PWR_WAKEUP_LCSC + * @arg @ref PWR_WAKEUP_COMP + * @arg @ref PWR_WAKEUP_LCD + * @arg @ref PWR_WAKEUP_RTC + * @arg @ref PWR_WAKEUP_LPUART + * @param WakeUpPolarity : Specifies the polarity of the wake up peripehral source. + * This parameter is applied only for the IOs source and + * can be a value of @ref PWR_WAKEUP_POLARITY. + * @retval None. + */ +void HAL_PWREx_EnableInternalWakeUpLine(uint32_t WakeUpPeripheral, uint32_t WakeUpPolarity) +{ + /* Check the parameters */ + assert_param(IS_PWR_WAKEUP_SOURCE(WakeUpPeripheral)); + assert_param(IS_PWR_WAKEUP_POLARITY(WakeUpPolarity)); + + /* Specifies the wake up line polarity for the event detection (rising or falling edge) */ + LL_PWR_SetWakeupInternalPolarity(WakeUpPeripheral, WakeUpPolarity); + + /* Enable wake-up internal peripheral */ + LL_PWR_EnableInternWU(WakeUpPeripheral); +} + +/** + * @brief Get and Clear Wake-up Peripheral source. + * @retval WakeUpPin : This parameter can be a combination of + * @ref PWR_WAKEUP_SOURCE define group + */ +uint32_t HAL_PWREx_GetClearInternalWakeUpLine(void) +{ + uint32_t wakeup_sources; + + /* Get all wake-up Peripheral */ + wakeup_sources = LL_PWR_GetInternalWakeupSource(); + + /* Clear all the wake-up Peripehral flags */ + LL_PWR_ClearInternalWakeupSource(wakeup_sources); + + return wakeup_sources; +} + +/** + * @brief Disable the wake up peripheral functionality. + * @param WakeUpPeripehral : Specifies the wake up peripehral to disable. + * This parameter can be a combination of + * @arg @ref PWR_WAKEUP_LPAWUR + * @arg @ref PWR_WAKEUP_SUBG + * @arg @ref PWR_WAKEUP_SUBGHOST + * @arg @ref PWR_WAKEUP_LCSC + * @arg @ref PWR_WAKEUP_COMP + * @arg @ref PWR_WAKEUP_LCD + * @arg @ref PWR_WAKEUP_RTC + * @arg @ref PWR_WAKEUP_LPUART + * @retval None + */ +void HAL_PWREx_DisableInternalWakeUpLine(uint32_t WakeUpPeripehral) +{ + /* Reset the wake up peripehral polarity to the default value */ + LL_PWR_SetWakeupInternalPolarity(WakeUpPeripehral, PWR_WUP_RISIEDG); + + /* Disable wake-up peripehral */ + LL_PWR_DisableInternWU(WakeUpPeripehral); +} + +/** + * @brief Enter the whole system in SHUTDOWN mode. + * @note The SHUTDOWN mode is the least power consuming mode. + * @note All the device clock and bus clocks are stopped, the VDD12i and + * VDD12o power domains are switched off. + * All the RAM banks are NOT retained. + * All the register content are lost. + * @retval None. + */ +void HAL_PWREx_EnterSHUTDOWNMode(void) +{ + + /* Clear all the wake-up pin flags */ + LL_PWR_ClearInternalWakeupSource(LL_PWR_WAKEUP_ALL); + LL_PWR_ClearWakeupSource(PWR_WAKEUP_PORTA, LL_PWR_WAKEUP_ALL); + LL_PWR_ClearWakeupSource(PWR_WAKEUP_PORTB, LL_PWR_WAKEUP_ALL); + + /* Enable the device Shutdown configuration */ + LL_PWR_SetPowerMode(LL_PWR_MODE_SHUTDOWN); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, SCB_SCR_SLEEPDEEP_Msk); + + /* Wait for Interrupt Request to enter in SHUTDOWN */ + __WFI(); +} + +/** + * @brief Enable the DEEPSTOP2 feature, debugger feature not lost during DEEPSTOP. + * @rmtoll DBGR HAL_PWREx_EnableDEEPSTOP2 + * @retval None + */ +void HAL_PWREx_EnableDEEPSTOP2(void) +{ + SET_BIT(PWR->DBGR, PWR_DBGR_DEEPSTOP2); +} + +/** + * @brief Disable the DEEPSTOP2 feature, debugger feature lost during DEEPSTOP. + * @rmtoll DBGR HAL_PWREx_DisableDEEPSTOP2 + * @retval None + */ +void HAL_PWREx_DisableDEEPSTOP2(void) +{ + CLEAR_BIT(PWR->DBGR, PWR_DBGR_DEEPSTOP2); +} + +/** + * @brief Configure the SMPS output voltage. + * @param OutputVoltage SMPS output voltage value. + * This parameter can be one of the following values + * @ref PWREx_SMPS_OUTPUT_VOLTAGE_LEVEL + * @param BOM SMPS BOM configuration. + * This parameter can be one of the following values + * @ref PWREx_SMPS_BOM + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PWREx_ConfigSMPS(uint32_t OutputVoltage, uint32_t BOM) +{ + /* Check the parameter */ + assert_param(IS_PWR_SMPS_OUTPUT_VOLTAGE(OutputVoltage)); + assert_param(IS_PWR_SMPS_BOM(BOM)); + + MODIFY_REG(PWR->CR5, PWR_CR5_SMPSLVL, OutputVoltage); + MODIFY_REG(PWR->CR5, PWR_CR5_SMPSBOMSEL, BOM); + + return HAL_OK; +} + +/** + * @brief Set SMPS operating mode. + * @param OperatingMode This parameter can be one of the following values: + * @arg @ref PWR_SMPS_ON + * @arg @ref PWR_SMPS_OFF + * @arg @ref PWR_SMPS_PRECHARGE + * + * @retval None + */ +void HAL_PWREx_SMPS_SetMode(uint32_t OperatingMode) +{ + /* Check the parameter */ + assert_param(IS_PWR_SMPS_MODE(OperatingMode)); + + /* SMPS ON Configuration */ + if (OperatingMode == PWR_SMPS_ON) + { + LL_PWR_SetSMPSMode(LL_PWR_SMPS); + while (!LL_PWR_IsSMPSinRUNMode()); + LL_PWR_SetSMPSPrechargeMode(LL_PWR_NO_SMPS_PRECHARGE); + } + + /* SMPS Precharge Configuration */ + if (OperatingMode == PWR_SMPS_BYPASS) + { + LL_PWR_SetSMPSMode(LL_PWR_SMPS); + while (!LL_PWR_IsSMPSinRUNMode()); + LL_PWR_SetSMPSPrechargeMode(OperatingMode); + } + + /* SMPS OFF Configuration */ + if (OperatingMode == PWR_SMPS_OFF) + { + LL_PWR_SetSMPSMode(OperatingMode); + while (LL_PWR_IsSMPSinRUNMode()); + LL_PWR_SetSMPSPrechargeMode(LL_PWR_NO_SMPS_PRECHARGE); + } +} + +/** + * @brief Get SMPS operating mode + * @retval Returned value can be one of the following values: + * @arg @ref PWR_SMPS_ON + * @arg @ref PWR_SMPS_OFF + * @arg @ref PWR_SMPS_PRECHARGE + */ +uint32_t HAL_PWREx_SMPS_GetMode(void) +{ + uint32_t smpsConfiguration; + + if (LL_PWR_IsEnabledSMPSPrechargeMode()) + { + smpsConfiguration = PWR_SMPS_PRECHARGE; + } + else + { + smpsConfiguration = LL_PWR_GetSMPSMode(); + } + + return smpsConfiguration; +} + +/** + * @brief Enable RAMs content retention in Deepstop mode. + * @note When enabling content retention for a given RAM, memory is kept powered + * on in Deepstop mode. + * @retval None. + */ +void HAL_PWREx_EnableSRAMRetention() +{ + /* Enable RAM BANK1 Retention in DEEPSTOP */ + SET_BIT(PWR->CR2, LL_PWR_RAMRET_1); +} + +/** + * @brief Disable RAMs content retention in Deepstop mode. + * @note When disabling content retention for a given RAM, memory content + * is lost in Deepstop mode. + * @retval None. + */ +void HAL_PWREx_DisableSRAMRetention() +{ + /* Disable RAM BANK1 Retention in DEEPSTOP */ + CLEAR_BIT(PWR->CR2, LL_PWR_RAMRET_1); +} + +/** + * @brief Enable the GPIORET feature, GPIO retain their status during DEEPSTOP + * and exiting from DEEPSTOP. + * @rmtoll CR2 GPIORET HAL_PWREx_EnableGPIORetention + * @retval None + */ +void HAL_PWREx_EnableGPIORetention() +{ + SET_BIT(PWR->CR2, PWR_CR2_GPIORET); +} + +/** + * @brief Disable the GPIORET feature, don't retain their status during DEEPSTOP and exiting from DEEPSTOP. + * @rmtoll CR2 GPIORET HAL_PWREx_DisableGPIORetention + * @retval None + */ +void HAL_PWREx_DisableGPIORetention() +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_GPIORET); +} + +/** + * @brief Enable the DBGRET feature, PA2 and PA3 retain their status during DEEPSTOP + * and exiting from DEEPSTOP. + * @rmtoll CR2 DBGRET HAL_PWREx_EnableDBGRetention + * @retval None + */ +void HAL_PWREx_EnableDBGRetention() +{ + SET_BIT(PWR->CR2, PWR_CR2_DBGRET); +} + +/** + * @brief Disable the DBGRET feature, don't retain their status during DEEPSTOP and exiting from DEEPSTOP. + * @rmtoll CR2 DBGRET HAL_PWREx_DisableDBGRetention + * @retval None + */ +void HAL_PWREx_DisableDBGRetention() +{ + CLEAR_BIT(PWR->CR2, PWR_CR2_DBGRET); +} + +/** + * @} + */ + +#endif /* HAL_PWR_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rcc.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rcc.c new file mode 100644 index 0000000000..98b7daadd1 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rcc.c @@ -0,0 +1,905 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_rcc.c + * @author MCD Application Team + * @brief RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Reset and Clock Control (RCC) peripheral: + * + Initialization and de-initialization functions + * + Peripheral Control functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### RCC specific features ##### + ============================================================================== + [..] + After reset the device is running from High Speed Internal oscillator + (64 MHz RC oscillator) with Flash 1 wait state. All peripherals clock are off except internal + SRAM, Flash and GPIO for SWD communication. + + (+) The prescaler is DIV 4 + (+) The clock for all peripherals is switched off, except the SRAM and FLASH and GPIO. + (+) All GPIOs are in input mode, except the SWD pins which + are assigned to be used for debug purpose. + + [..] + Once the device started from reset, the user application has to: + (+) Configure the clock source to be used to drive the System clock + (if the application needs higher frequency/performance) + (+) Configure the System clock frequency and Flash settings + (+) Enable the clock for the peripheral(s) to be used + (+) Configure the clock source(s) for peripherals which clocks are not + always 16MHz or 32 MHz (SMPS, SPI3I2S) + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup RCC RCC + * @brief RCC HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Constants RCC Private Constants + * @{ + */ +#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT +#define HSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define LSI_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define PLL_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ +#define LATENCY_TIMEOUT_VALUE (2U) /* 2 ms (minimum Tick + 1) */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup RCC_Private_Macros RCC Private Macros + * @{ + */ + +#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO1_GPIO_PORT GPIOA +#define MCO1_PIN GPIO_PIN_5 +#define MCO1_GPIO_AF GPIO_AF0_MCO + +#define __MCO2_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define MCO2_GPIO_PORT GPIOA +#define MCO2_PIN GPIO_PIN_11 +#define MCO2_GPIO_AF GPIO_AF0_MCO + +#define __MCO3_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() + +#define MCO3_GPIO_PORT GPIOB +#define MCO3_PIN GPIO_PIN_14 +#define MCO3_GPIO_AF GPIO_AF3_MCO + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup RCC_Private_Variables RCC Private Variables + * @{ + */ + + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCC_Exported_Functions RCC Exported Functions + * @{ + */ + +/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] + This section provides functions allowing to configure the internal and external oscillators + (HSE, HSI, LSE, LSI, PLL and MCO) and the System busses clocks (SYSCLK). + + [..] Internal/external clock and PLL configuration + (+) HSI (high-speed internal): 64 MHz factory-trimmed RC used through + the PLL as System clock source. + + (+) LSI (low-speed internal): 32 KHz low consumption RC used as IWDG, LPUART, + RF system Auto-wakeup from DeepStop modes. + clock source. + + (+) HSE (high-speed external): 48 MHz crystal oscillator. + + (+) LSE (low-speed external): 32.768 KHz oscillator used as IWDG, RTC, LPUART, + RF system Auto-wakeup from DeepStop modes. + + (+) PLL (clocked by HSI, HSE) providing system clock. + + (+) MCO (microcontroller clock output): used to output HSI, HSE, SYSCLK, + HSI64M_DIV2048, RC64MPLL clock (through a configurable prescaler) on PA5, PA11 & PB15 pins. + + -@- All the peripheral clocks have an always 16 MHz or 32 MHz to maintain fixed baud rate + while system clock is switching from a frequency to another from the System clock (SYSCLK). + An always 32 or 16 MHz requested by few peripherals like the MR_BLE radio IP for instance. + An always 16 MHz requested by few peripherals like serial interfaces or like flash controller and + MR_BLE radio IP (to have a fixed reference clock to manage delays). + + (+@) A programmable prescaled clock for I2S block, that can be 16 MHz / 32 MHz. + You have to use @ref __HAL_RCC_SPI3I2S_CONFIG and @ref HAL_RCCEx_PeriphCLKConfig() + function to configure this clock. + + (+) The maximum frequency of the SYSCLK is 64 MHz. + + @endverbatim + + Table 1. Flash Latency vs Clock frequency. + +-------------------------------------------------------+ + | Wait State | System clock frequency (MHz) | + |-----------------|-------------------------------------| + |0WS(1 CPU cycles)| SYSCLK < 38 MHz | + |-----------------|-------------------------------------| + |1WS(2 CPU cycles)| SYSCLK >= 38 MHz | + +-----------------+-------------------------------------+ + + * @{ + */ + +/** + * @brief Reset the RCC clock configuration to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI 16MHz, PLL OFF + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI and LSE clocks + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_DeInit(void) +{ + uint32_t tickstart; + uint32_t vl_mask; + + /* If DIRECT_HSE configuration is enabled we need to re-enable the HSI */ + if (LL_RCC_DIRECT_HSE_IsEnabled()) + { + LL_RCC_DIRECT_HSE_Disable(); + } + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Disable the HSE clock source */ + __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF); + + /* Wait for HSE READY bit to be reset */ + while (LL_RCC_HSE_IsReady() != 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Disable the RC64MPLL clock source */ + LL_RCC_RC64MPLL_Disable(); + + /* Set the System Clock prescaler to reset state */ + LL_RCC_SetRC64MPLLPrescaler(LL_RCC_RC64MPLL_DIV_4); + + /* Wait for PLL READY bit to be reset */ + while (LL_RCC_RC64MPLL_IsReady() != 0U) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Insure HSIRDY bit is set */ + while (LL_RCC_HSI_IsReady() == 0U) + { + if ((HAL_GetTick() - tickstart) > HSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Clear all interrupt flags */ + vl_mask = RCC_CIFR_LSIRDYF | RCC_CIFR_LSERDYF | RCC_CIFR_HSIRDYF | RCC_CIFR_HSERDYF | RCC_CIFR_HSIPLLRDYF; + LL_RCC_WriteReg(CIFR, vl_mask); + + /* Clear reset flags */ + LL_RCC_ClearResetFlags(); + + /* Update SystemCoreClock global variable */ + SystemCoreClock = HSI_VALUE / 4; + + /* Adapt Systick interrupt period */ + if (HAL_InitTick(HAL_GetTickPrio()) != HAL_OK) + { + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Initialize the RCC Oscillators according to the specified parameters in the + * @ref RCC_OscInitTypeDef. + * @param RCC_OscInitStruct pointer to a @ref RCC_OscInitTypeDef structure that + * contains the configuration information for the RCC Oscillators. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if (RCC_OscInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); + + /*------------------------------- HSI Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) + { + assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); + __HAL_RCC_HSI_CONFIG(RCC_OscInitStruct->HSIState); + + if(RCC_OscInitStruct->HSIState == RCC_HSI_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is disabled */ + while (LL_RCC_HSI_IsReady() == 1U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSI is enabled */ + while (LL_RCC_HSI_IsReady() != 1U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + + /*------------------------------- HSE Configuration ------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) + { + /* Check the parameters */ + assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); + + /* Set HSE Capacitor Tuning */ + LL_RCC_HSE_SetCapacitorTuning(CFG_HW_RCC_HSE_CAPACITOR_TUNE); + + /* Set HSE startup Current */ + LL_RCC_HSE_SetStartupCurrent(0); + + /* Set HSE Amplitude Threshold */ + LL_RCC_HSE_SetAmplitudeThreshold(0); + + /* Set HSE Current Control */ + LL_RCC_HSE_SetCurrentControl(40); + + /* Set the new HSE configuration ---------------------------------------*/ + __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); + + /* Check the HSE State */ + if (RCC_OscInitStruct->HSEState != RCC_HSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is ready */ + while (LL_RCC_HSE_IsReady() == 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till HSE is disabled */ + while (LL_RCC_HSE_IsReady() != 0U) + { + if ((HAL_GetTick() - tickstart) > HSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + + /*--------------------------------- LSI Configuration -----------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) + { + /* Check the parameters */ + assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); + + /* Check the LSI State */ + if (RCC_OscInitStruct->LSIState != RCC_LSI_OFF) + { + /* Disable the LSI */ + __HAL_RCC_LSI_DISABLE(); + while (__HAL_RCC_GET_LSI_READYFLAG() != 0U); + + /* Disable the LSE */ + __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF); + + /* Configure the Low Speed Clock to LSI */ + LL_RCC_LSCO_SetSource(LL_RCC_LSCO_CLKSOURCE_LSI); + + /* Enable the Internal Low Speed oscillator (LSI) */ + __HAL_RCC_LSI_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is ready */ + while (__HAL_RCC_GET_LSI_READYFLAG() == 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + + /* Disable the Internal Low Speed oscillator (LSI). */ + __HAL_RCC_LSI_DISABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSI is disabled */ + while (__HAL_RCC_GET_LSI_READYFLAG() != 0U) + { + if ((HAL_GetTick() - tickstart) > LSI_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + + /*------------------------------ LSE Configuration -------------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) + { + + /* Check the parameters */ + assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); + + /* Disable LSI */ + __HAL_RCC_LSI_DISABLE(); + + /* Disable LSE */ + __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF); + while (__HAL_RCC_GET_LSE_READYFLAG() != 0); + + /* Configure the PB12 and PB13 in NO PULL mode */ + LL_PWR_SetNoPullB(LL_PWR_GPIO_BIT_12 | + LL_PWR_GPIO_BIT_13); + + /* Configure the Low Speed Clock to LSE */ + LL_RCC_LSCO_SetSource(LL_RCC_LSCO_CLKSOURCE_LSE); + + /* Set LSE oscillator drive capability */ + __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_MEDIUMLOW); + + /* Set the new LSE state */ + __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); + + /* Check the LSE State */ + if (RCC_OscInitStruct->LSEState != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (__HAL_RCC_GET_LSE_READYFLAG() == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while (__HAL_RCC_GET_LSE_READYFLAG() != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + + /*------------------------------ LSE Bypass Configuration ------------------*/ + if (((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE_BYPASS) == RCC_OSCILLATORTYPE_LSE_BYPASS) + { + + /* Check the parameters */ + assert_param(IS_RCC_LSE_BYPASS(RCC_OscInitStruct->LSEBYPASSState)); + + /* Set the new LSE Bypass configuration -----------------------------------------*/ + __HAL_RCC_LSE_BYPASS_CONFIG(RCC_OscInitStruct->LSEBYPASSState); + + /* Check the LSE Bypass State */ + if (RCC_OscInitStruct->LSEBYPASSState != RCC_LSE_OFF) + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is ready */ + while (LL_RCC_LSE_IsBypassEnabled() == 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + else + { + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till LSE is disabled */ + while (LL_RCC_LSE_IsBypassEnabled() != 0U) + { + if ((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + } + + return HAL_OK; +} + + +/** + * @brief Initialize the system clock according to the specified + * parameters in the RCC_ClkInitStruct. + * @param RCC_ClkInitStruct pointer to a @ref RCC_ClkInitTypeDef structure that + * contains the configuration information for the RCC peripheral. + * @param FLatency FLASH Latency + * This parameter can be one of the following values: + * @arg FLASH_WAIT_STATES_0 FLASH 0 wait state cycle + * @arg FLASH_WAIT_STATES_1 FLASH 1 wait state cycle + * + * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency + * and updated within this function + * + * @note A switch from one clock source to another occurs only if the target + * clock source is ready (clock stable after startup delay). + * If a clock source which is not yet ready is selected, the switch will + * occur when the clock source is ready. + * + * @note You can use @ref HAL_RCC_GetClockConfig() function to know which clock is + * currently used as system clock source. + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) +{ + uint32_t tickstart; + + /* Check Null pointer */ + if (RCC_ClkInitStruct == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_FLASH_WAIT_STATES(FLatency)); + + /* Set FALSH_WAIT_STATES_1 */ + __HAL_FLASH_SET_WAIT_STATES(FLatency); + + /*------------------------- SYSCLK Configuration ---------------------------*/ + assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); + assert_param(IS_RCC_SYSCLK_DIVIDER(RCC_ClkInitStruct->SYSCLKDivider)); + + /* HSI is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI) + { + LL_RCC_HSI_Enable(); + + /* Check the HSI ready flag */ + if (LL_RCC_HSI_IsReady() == 0U) + { + return HAL_ERROR; + } + + /* Disable the RC64MPLL*/ + __HAL_RCC_RC64MPLL_DISABLE(); + + /* Configure the RC64MPLL multiplication factor */ + __HAL_RCC_RC64MPLL_PRESC_CONFIG(RCC_ClkInitStruct->SYSCLKDivider); + } + + /* RC64MPLL is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_RC64MPLL) + { + /* Check the HSI ready flag */ + if (LL_RCC_HSI_IsReady() == 0U) + { + return HAL_ERROR; + } + + /* Check the HSE ready flag */ + if (LL_RCC_HSE_IsReady() == 0U) + { + return HAL_ERROR; + } + + /* Enable the RC64MPLL*/ + __HAL_RCC_RC64MPLL_ENABLE(); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Wait till RC64MPLL is ready */ + while (LL_RCC_RC64MPLL_IsReady() == 0) + { + if ((HAL_GetTick() - tickstart) > PLL_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + /* Configure the RC64MPLL multiplication factor */ + __HAL_RCC_RC64MPLL_PRESC_CONFIG(RCC_ClkInitStruct->SYSCLKDivider); + } + + /* DIRECT_HSE is selected as System Clock Source */ + if (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_DIRECT_HSE) + { + /* Enable the DIRECT_HSE configuration */ + LL_RCC_DIRECT_HSE_Enable(); + + /* Check the HSI ready flag */ + if (LL_RCC_HSI_IsReady() != 0U) + { + return HAL_ERROR; + } + + /* Check the HSE ready flag */ + if (LL_RCC_HSE_IsReady() == 0U) + { + return HAL_ERROR; + } + + /* Configure the DIRECT_HSE multiplication factor */ + __HAL_RCC_DIRECT_HSE_PRESC_CONFIG(RCC_ClkInitStruct->SYSCLKDivider); + } + + /*----------------------- FLASH Latency Configuration ------------------------*/ + /* To correctly read data from FLASH memory, the number of wait states (LATENCY) + must be correctly programmed according to the frequency of the FLASH clock */ + + /* Setup flash wait states because according the system clock frequency */ + if (FLatency != __HAL_FLASH_GET_WAIT_STATES()) + { + /* Program the new number of wait states to the LATENCY bits in the FLASH_CONFIG register */ + __HAL_FLASH_SET_WAIT_STATES(FLatency); + + /* Get Start Tick*/ + tickstart = HAL_GetTick(); + + /* Check that the new number of wait states is taken into account to access the Flash + memory by reading the FLASH_CONFIG register */ + while (__HAL_FLASH_GET_WAIT_STATES() != FLatency) + { + if ((HAL_GetTick() - tickstart) > LATENCY_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + } + + /*---------------------------------------------------------------------------*/ + + /* Update the SystemCoreClock global variable */ + SystemCoreClockUpdate(); + + /* Configure the source of time base considering new system clocks settings*/ + return HAL_InitTick(HAL_GetTickPrio()); +} + +/** + * @} + */ + +/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions + * @brief RCC clocks control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to: + + (+) Output clock to MCO pin. + (+) Retrieve current clock frequencies. + +@endverbatim + * @{ + */ + +/** + * @brief Select the clock source to output on MCO1 pin(PA5) or MC02 pin (PA11) or MCO3 pin (PB14/PB15). + * @note PA5, PA11 or PB14/PB15 should be configured in alternate function mode. + * @param RCC_MCOx specifies the output direction for the clock source. + * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA5) + * @arg @ref RCC_MCO2 Clock source to output on MCO2 pin(PA11) + * @arg @ref RCC_MCO3 Clock source to output on MCO3 pin(PB14/PB15) + * @param RCC_MCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_MCOSOURCE_NOCLOCK MCO output disabled, no clock on MCO + * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSI HSI clock selected as MCO source + * @arg @ref RCC_MCO1SOURCE_HSE HSE clock selected as MCO source + * @arg @ref RCC_MCOSOURCE_RC64MPLL RC64MPLL clock selected as MCO source + * @arg @ref RCC_MCOSOURCE_HSI64M_DIV2048 HSI64M_DIV2048 clock selected as MCO source + * @arg @ref RCC_MCOSOURCE_SMPS SMPS clock selected as MCO source + * @arg @ref RCC_MCOSOURCE_ADC ADC clock before stabilization selected as MCO source + * @param RCC_MCODiv specifies the MCO prescaler. + * This parameter can be one of the following values: + * @arg @ref RCC_MCODIV_1 no division applied to MCO clock + * @arg @ref RCC_MCODIV_2 division by 2 applied to MCO clock + * @arg @ref RCC_MCODIV_4 division by 4 applied to MCO clock + * @arg @ref RCC_MCODIV_8 division by 8 applied to MCO clock + * @arg @ref RCC_MCODIV_16 division by 16 applied to MCO clock + * @arg @ref RCC_MCODIV_32 division by 32 applied to MCO clock + * @retval None + */ +void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Check the parameters */ + assert_param(IS_RCC_MCO(RCC_MCOx)); + assert_param(IS_RCC_MCODIV(RCC_MCODiv)); + assert_param(IS_RCC_MCOSOURCE(RCC_MCOSource)); + + /* Common GPIO init parameters */ + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + +#if defined(MCO1_PIN) + if (RCC_MCOx == RCC_MCO1) + { + /* MCO1 Clock Enable */ + __MCO1_CLK_ENABLE(); + /* Configure the MCO1 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO1_PIN; + GPIO_InitStruct.Alternate = MCO1_GPIO_AF; + HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct); + } +#endif + + if (RCC_MCOx == RCC_MCO2) + { + /* MCO2 Clock Enable */ + __MCO2_CLK_ENABLE(); + /* Configure the MCO2 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO2_PIN; + GPIO_InitStruct.Alternate = MCO2_GPIO_AF; + HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct); + } + + if (RCC_MCOx == RCC_MCO3) + { + /* MCO3 Clock Enable */ + __MCO3_CLK_ENABLE(); + /* Configure the MCO3 pin in alternate function mode */ + GPIO_InitStruct.Pin = MCO3_PIN; + GPIO_InitStruct.Alternate = MCO3_GPIO_AF; + HAL_GPIO_Init(MCO3_GPIO_PORT, &GPIO_InitStruct); + } + + /* Mask MCOSEL[] and CCOPRE[] bits then set MCO clock source and prescaler */ + LL_RCC_ConfigMCO(RCC_MCOSource, RCC_MCODiv); +} + +/** + * @brief Return the SYSCLK frequency. + * + * @note The system computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source. The return value is the + * content of the SystemCoreClock CMSIS variable + * + * @retval SYSCLK frequency + */ +uint32_t HAL_RCC_GetSysClockFreq(void) +{ + return SystemCoreClock; +} + +/** + * @brief Configure the RCC_OscInitStruct according to the internal + * RCC configuration registers. + * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that + * will be configured. + * @retval None + */ +void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) +{ + /* Check the parameters */ + assert_param(RCC_OscInitStruct != (void *)NULL); + + /* Set all possible values for the Oscillator type parameter ---------------*/ + RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | \ + RCC_OSCILLATORTYPE_LSE | \ + RCC_OSCILLATORTYPE_LSI | \ + RCC_OSCILLATORTYPE_LSE_BYPASS; + + + /* Get the HSE configuration -----------------------------------------------*/ + if (LL_RCC_HSE_IsEnabled()) + { + RCC_OscInitStruct->HSEState = RCC_HSE_ON; + } + else + { + RCC_OscInitStruct->HSEState = RCC_HSE_OFF; + } + + /* Get the LSE configuration -----------------------------------------------*/ + if (LL_RCC_LSE_IsEnabled()) + { + RCC_OscInitStruct->LSEState = RCC_LSE_ON; + } + else + { + RCC_OscInitStruct->LSEState = RCC_LSE_OFF; + } + + /* Get the LSE Bypass configuration ----------------------------------------*/ + if (LL_RCC_LSE_IsBypassEnabled()) + { + RCC_OscInitStruct->LSEBYPASSState = RCC_LSE_BYPASS_ON; + } + else + { + RCC_OscInitStruct->LSEBYPASSState = RCC_LSE_BYPASS_OFF; + } + + /* Get the LSI configuration -----------------------------------------------*/ + if (LL_RCC_LSI_IsEnabled()) + { + RCC_OscInitStruct->LSIState = RCC_LSI_ON; + } + else + { + RCC_OscInitStruct->LSIState = RCC_LSI_OFF; + } +} + +/** + * @brief Configure the RCC_ClkInitStruct according to the internal + * RCC configuration registers. + * @param RCC_ClkInitStruct Pointer to a @ref RCC_ClkInitTypeDef structure that + * will be configured. + * @param pFLatency Pointer on the Flash Latency. + * @retval None + */ +void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) +{ + /* Check the parameters */ + assert_param(RCC_ClkInitStruct != (void *)NULL); + assert_param(pFLatency != (void *)NULL); + + /* Set all possible values for the Clock type parameter --------------------*/ + + /* Get the SYSCLK configuration --------------------------------------------*/ + if (LL_RCC_DIRECT_HSE_IsEnabled()) + { + RCC_ClkInitStruct->SYSCLKSource = RCC_SYSCLKSOURCE_DIRECT_HSE; + } + else + { + RCC_ClkInitStruct->SYSCLKSource = RCC_SYSCLKSOURCE_RC64MPLL; + } + + /* Get the SYSCLK Divider --------------------------------------------------*/ +#if defined(RCC_CFGR_CLKSYSDIV_STATUS) + RCC_ClkInitStruct->SYSCLKDivider = LL_RCC_GetCLKSYSPrescalerStatus(); +#else + if (LL_RCC_DIRECT_HSE_IsEnabled()) + { + RCC_ClkInitStruct->SYSCLKDivider = LL_RCC_GetDirectHSEPrescaler(); + } + else + { + RCC_ClkInitStruct->SYSCLKDivider = LL_RCC_GetRC64MPLLPrescaler(); + } +#endif + + /* Get the Flash Wait State (Latency) configuration ------------------------*/ + *pFLatency = __HAL_FLASH_GET_WAIT_STATES(); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rcc_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rcc_ex.c new file mode 100644 index 0000000000..11d8dd4c6e --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rcc_ex.c @@ -0,0 +1,431 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_rcc_ex.c + * @author MCD Application Team + * @brief Extended RCC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities RCC extended peripheral: + * + Extended Peripheral Control functions + * + Extended Clock management functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup RCCEx RCCEx + * @brief RCC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RCC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup RCCEx_Private_Constants RCCEx Private Constants + * @{ + */ + +#if defined(STM32WL3XX) +#define __LSCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define LSCO1_GPIO_PORT GPIOA +#define LSCO1_PIN GPIO_PIN_4 +#define LSCO1_GPIO_AF GPIO_AF0_LCO +#endif + +#define __LSCO2_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() +#define LSCO2_GPIO_PORT GPIOA +#define LSCO2_PIN GPIO_PIN_10 +#define LSCO2_GPIO_AF GPIO_AF0_LCO + + +#if defined(STM32WL3XX) +#define __LSCO3_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() +#define LSCO3_GPIO_PORT GPIOB +#define LSCO3_PIN GPIO_PIN_12 +#define LSCO3_GPIO_AF GPIO_AF2_LCO +#endif + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions + * @{ + */ + +/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the RCC Clocks + frequencies. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the RCC extended peripherals clocks according to the specified + * parameters in the @ref RCC_PeriphCLKInitTypeDef. + * @param PeriphClkInit pointer to a @ref RCC_PeriphCLKInitTypeDef structure that + * contains a field PeriphClockSelection which can be a combination of the following values: + * + * @arg @ref RCC_PERIPHCLK_RF RF peripheral clock + * @arg @ref RCC_PERIPHCLK_SMPS SMPS peripheral clock + * @arg @ref RCC_PERIPHCLK_SPI3_I2S SPI3 I2S peripheral clock + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); + + + /*-------------------------- SMPS clock configuration -------------------------------*/ + if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SMPS) == RCC_PERIPHCLK_SMPS)) + { + assert_param(IS_RCC_SMPS_CLOCK_PRESC(PeriphClkInit->SmpsDivSelection)); + __HAL_RCC_SMPS_DIV_CONFIG(PeriphClkInit->SmpsDivSelection); + __HAL_RCC_KRM_RATE_MULTIPLIER_CONFIG(PeriphClkInit->KRMRateMultiplier); + } + + /*-------------------------- SPI3_I2S clock source configuration ---------------------*/ + if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPI3_I2S) == RCC_PERIPHCLK_SPI3_I2S)) + { + assert_param(IS_RCC_SPI3I2S_CLOCK_SOURCE(PeriphClkInit->SPI3I2SClockSelection)); + __HAL_RCC_SPI3I2S_CLK_CONFIG(PeriphClkInit->SPI3I2SClockSelection); + } +#if defined(RCC_CFGR_LPUCLKSEL) + /*-------------------------- LPUART1 clock source configuration ---------------------*/ + if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1)) + { + assert_param(IS_RCC_LPUART1_CLOCK_SOURCE(PeriphClkInit->LPUART1ClockSelection)); + __HAL_RCC_LPUART1_CLK_CONFIG(PeriphClkInit->LPUART1ClockSelection); + } +#endif /* RCC_CFGR_LPUCLKSEL */ + + if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC_WDG_SUBG_LPAWUR_LCD_LCSC) == + RCC_PERIPHCLK_RTC_WDG_SUBG_LPAWUR_LCD_LCSC)) + { + assert_param(IS_RCC_RTC_WDG_SUBG_PAWUR_LCD_LCSC_CLOCK_SOURCE(PeriphClkInit->RTCWDGSUBGLPAWURLCDLCSCClockSelection)); + __HAL_RCC_RTC_SUBG_LPAWUR_LCD_LCSC_CLK_CONFIG(PeriphClkInit->RTCWDGSUBGLPAWURLCDLCSCClockSelection); + } + + return HAL_OK; +} + + +/** + * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. + * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that + * returns the configuration information for the Extended Peripherals + * clocks(RF, SMPS, SPI3I2S). + * @retval None + */ +void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) +{ + /* Set all possible values for the extended clock type parameter------------*/ + PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLOCK_ALL; + + /* Get the SPI clock config --------------------------------------------------*/ + + /* Get the SPI3 I2S clock source -------------------------------------------*/ + PeriphClkInit->SPI3I2SClockSelection = __HAL_RCC_GET_SPI3I2S_CLK_CONFIG(); + + /* Get the RF clock config -------------------------------------------------*/ +#if defined(RCC_CFGR_LPUCLKSEL) + PeriphClkInit->LPUART1ClockSelection = __HAL_RCC_GET_LPUART1_CLK_CONFIG(); +#endif /* RCC_CFGR_LPUCLKSEL */ + + /* Get the SMPS clock divider ------------------------------------------------*/ + PeriphClkInit->SmpsDivSelection = __HAL_RCC_GET_SMPS_DIV(); + + /* Get the KRM rate multiplier -----------------------------------------------*/ + PeriphClkInit->KRMRateMultiplier = __HAL_RCC_GET_KRM_RATE_MULTIPLIER(); + + /* Get RTC, WDG and SUBG LPAWUR LCD LCSC clock */ + PeriphClkInit->RTCWDGSUBGLPAWURLCDLCSCClockSelection = __HAL_RCC_GET_RTC_SUBG_LPAWUR_LCD_LCSC_CLK_CONFIG(); +} + +/** + * @brief Return the peripheral clock frequency for peripherals with clock source + * @note Return 0 if peripheral clock identifier not managed by this API + * @param PeriphClk Peripheral clock identifier + * This parameter can be one of the following values: + * @arg @ref RCC_PERIPHCLK_RF RF peripheral clock + * @arg @ref RCC_PERIPHCLK_SMPS SMPS peripheral clock + * @arg @ref RCC_PERIPHCLK_SPI3_I2S SPI3 I2S peripheral clock + * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock + * @retval Frequency in Hz + * @note (*) Peripherals are not available on all devices + */ +uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) +{ + uint32_t frequency, spiFreqValue, krmValue; + + /* Check the parameters */ + assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); + + /* No if clausule is covered */ + frequency = 0; + + switch (PeriphClk) + { + case RCC_PERIPHCLK_RF : + frequency = HSE_VALUE / 3; + break; + + case RCC_PERIPHCLK_SMPS : + if (__HAL_RCC_IS_KRM_ENABLED()) + { + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_DIRECT_HSE) + { + frequency = HSE_VALUE; + } + else + { + frequency = RC64MPLL_VALUE; + } + krmValue = __HAL_RCC_GET_KRM_RATE_MULTIPLIER(); + if (krmValue < 8) + { + krmValue = 8; + } + frequency = frequency / krmValue; + } + else + { + switch (__HAL_RCC_GET_SMPS_DIV()) + { + case RCC_SMPSCLK_DIV2: + frequency = RC64MPLL_VALUE / 8; + break; + case RCC_SMPSCLK_DIV4: + frequency = RC64MPLL_VALUE / 16; + break; + } + } + break; + + case RCC_PERIPHCLK_SPI3_I2S : + spiFreqValue = __HAL_RCC_GET_SPI3I2S_CLK_CONFIG(); + switch (spiFreqValue) + { + case RCC_SPI3I2S_CLKSOURCE_CLK_ROOT_DIV : + frequency = RC64MPLL_VALUE / 4; + break; + + case RCC_SPI3I2S_CLKSOURCE_CLK_ROOT : + if (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_DIRECT_HSE) + { + frequency = HSE_VALUE / 2; + } + else + { + frequency = RC64MPLL_VALUE / 2; + } + break; + case RCC_SPI3I2S_CLKSOURCE_CLK_RC64MPLL : + frequency = HAL_RCC_GetSysClockFreq() ; + break; + } + break; +#if defined(RCC_CFGR_LPUCLKSEL) + case RCC_PERIPHCLK_LPUART1 : + switch (__HAL_RCC_GET_LPUART1_CLK_CONFIG()) + { + case RCC_LPUART1_CLKSOURCE_LSE: + frequency = LSE_VALUE; + break; + case RCC_LPUART1_CLKSOURCE_16M: + frequency = 16000000U; + break; + default: + frequency = HSE_VALUE / 2; + break; + } + break; +#endif /* RCC_CFGR_LPUCLKSEL */ + default : + break; + } + return (frequency); +} + +/** + * @} + */ + +/** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions + * @brief Extended Clock management functions + * +@verbatim + =============================================================================== + ##### Extended clock management functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the + activation or deactivation Low speed clock output. +@endverbatim + * @{ + */ + +/** + * @brief Select the clock source to output on LSCO1 pin(PA4) or LSC02 pin (PA10) or LSCO3 pin (PB12). + * @note PA4, PA10 or PB12 should be configured in alternate function mode. + * @param RCC_LSCOx specifies the output direction for the clock source. + * @arg @ref RCC_LSCO1 Clock source to output on LSCO1 pin(PA4) + * @arg @ref RCC_LSCO2 Clock source to output on LSCO2 pin(PA10) + * @arg @ref RCC_LSCO3 Clock source to output on LSCO3 pin(PB12) + * @param RCC_LSCOSource specifies the clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source + * @arg @ref RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source + * @retval None + * @note LSCO should be disable with @ref HAL_RCCEx_DisableLSCO + */ +void HAL_RCCEx_LSCOConfig(uint32_t RCC_LSCOx, uint32_t RCC_LSCOSource) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Check the parameters */ + assert_param(IS_RCC_LSCO(RCC_LSCOx)); + assert_param(IS_RCC_LSCOSOURCE(RCC_LSCOSource)); + + /* Common GPIO init parameters */ + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + +#if defined(LSCO1_PIN) + if (RCC_LSCOx == RCC_LSCO1) + { + /* LSCO1 Clock Enable */ + __LSCO1_CLK_ENABLE(); + /* Configure the LSCO1 pin in alternate function mode */ + GPIO_InitStruct.Pin = LSCO1_PIN; + GPIO_InitStruct.Alternate = LSCO1_GPIO_AF; + HAL_GPIO_Init(LSCO1_GPIO_PORT, &GPIO_InitStruct); + } +#endif + + if (RCC_LSCOx == RCC_LSCO2) + { + /* LSCO2 Clock Enable */ + __LSCO2_CLK_ENABLE(); + /* Configure the LSCO2 pin in alternate function mode */ + GPIO_InitStruct.Pin = LSCO2_PIN; + GPIO_InitStruct.Alternate = LSCO2_GPIO_AF; + HAL_GPIO_Init(LSCO2_GPIO_PORT, &GPIO_InitStruct); + } + + if (RCC_LSCOx == RCC_LSCO3) + { + /* LSCO3 Clock Enable */ + __LSCO3_CLK_ENABLE(); + /* Configure the LSCO3 pin in alternate function mode */ + GPIO_InitStruct.Pin = LSCO3_PIN; + GPIO_InitStruct.Alternate = LSCO3_GPIO_AF; + HAL_GPIO_Init(LSCO3_GPIO_PORT, &GPIO_InitStruct); + } + + /* Configure the clock source to output */ + LL_RCC_ConfigLSCO(RCC_LSCOSource); +} + + +/** + * @brief Enable the Low Speed clock source to output on LSCO pin during STANDBY with retention. + * It is applicable only for LSCO2 + * @param LSCOSource specifies the Low Speed clock source to output. + * This parameter can be one of the following values: + * @arg @ref RCC_LSCOSOURCE_LSI_LPMU Internal LPMU slow clock source selected as LSCO source + * @arg @ref RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source + * @arg @ref RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source + * @retval None + */ +void HAL_RCCEx_EnableLSCOinDEEPSTOP(uint32_t LSCOSource) +{ + GPIO_InitTypeDef GPIO_InitStruct; + + /* Check the parameters */ + assert_param(IS_RCC_LSCOSOURCE(LSCOSource)); + + /* LSCO Pin Clock Enable */ + __LSCO2_CLK_ENABLE(); + + /* Configure the LSCO pin in alternate function mode */ + GPIO_InitStruct.Pin = LSCO2_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = LSCO2_GPIO_AF; + HAL_GPIO_Init(LSCO2_GPIO_PORT, &GPIO_InitStruct); + + /* Enable the LSCO2 pin during STANDBY with retention */ +#if defined(RCC_CFGR_LCOEN) + LL_RCC_LSCOinDeepStop_Enable(); +#endif + /* Configure the clock source to output */ + LL_RCC_ConfigLSCO(LSCOSource); +} + +/** + * @brief Disable the Low Speed clock output. + * @retval None + */ +void HAL_RCCEx_DisableLSCO(void) +{ +#if defined(RCC_CFGR_LCOEN) + LL_RCC_LSCOinDeepStop_Disable(); +#endif + LL_RCC_ConfigLSCO(LL_RCC_LSCOSOURCE_NOCLOCK); + +} + + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* HAL_RCC_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rng.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rng.c new file mode 100644 index 0000000000..4462f687f5 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rng.c @@ -0,0 +1,360 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_rng.c + * @author MCD Application Team + * @brief RNG HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Random Number Generator (RNG) peripheral: + * + Initialization and configuration functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The RNG HAL driver can be used as follows: + + (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro + in HAL_RNG_MspInit(). + (#) Activate the RNG peripheral using HAL_RNG_Init() function. + (#) Wait until the 16/32 bit Random Number Generator contains a valid + random data using polling mode. + (#) Get the 16/32 bit random number using HAL_RNG_GenerateRandomNumber() function. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +#if defined (RNG) + +/** @addtogroup RNG + * @brief RNG HAL module driver. + * @{ + */ + +#ifdef HAL_RNG_MODULE_ENABLED + +/* Private types -------------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup RNG_Private_Constants RNG Private Constants + * @{ + */ +#define RNG_TIMEOUT_VALUE 2U +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/* Private functions prototypes ----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RNG_Exported_Functions + * @{ + */ + +/** @addtogroup RNG_Exported_Functions_Group1 + * @brief Initialization and configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and configuration functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initialize the RNG according to the specified parameters + in the RNG_InitTypeDef and create the associated handle + (+) DeInitialize the RNG peripheral + (+) Initialize the RNG MSP + (+) DeInitialize RNG MSP + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RNG peripheral and creates the associated handle. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng) +{ + /* Check the RNG handle allocation */ + if (hrng == NULL) + { + return HAL_ERROR; + } + /* Check the parameters */ + assert_param(IS_RNG_ALL_INSTANCE(hrng->Instance)); +#if defined (RNG_CR_TST_CLK) + assert_param(IS_RNG_CED(hrng->Init.ClockErrorDetection)); +#endif /* RNG_CR_TST_CLK */ + + if (hrng->State == HAL_RNG_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrng->Lock = HAL_UNLOCKED; + + /* Init the low level hardware */ + HAL_RNG_MspInit(hrng); + } + + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Reset the CR */ + hrng->Instance->CR = 0U; + +#if defined (RNG_CR_TST_CLK) + /* Clock Error Detection Configuration */ + MODIFY_REG(hrng->Instance->CR, RNG_CR_TST_CLK, hrng->Init.ClockErrorDetection); +#endif /* RNG_CR_TST_CLK */ + + /* Enable the RNG Peripheral */ + __HAL_RNG_ENABLE(hrng); + + /* Initialize the RNG state */ + hrng->State = HAL_RNG_STATE_READY; + + /* Initialise the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_NONE; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief DeInitializes the RNG peripheral. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng) +{ + /* Check the RNG handle allocation */ + if (hrng == NULL) + { + return HAL_ERROR; + } + + /* Disable the RNG Peripheral */ + __HAL_RNG_DISABLE(hrng); + /* DeInit the low level hardware */ + HAL_RNG_MspDeInit(hrng); + + /* Update the RNG state */ + hrng->State = HAL_RNG_STATE_RESET; + + /* Initialise the error code */ + hrng->ErrorCode = HAL_RNG_ERROR_NONE; + + /* Release Lock */ + __HAL_UNLOCK(hrng); + + /* Return the function status */ + return HAL_OK; +} + +/** + * @brief Initializes the RNG MSP. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_MspInit must be implemented in the user file. + */ +} + +/** + * @brief DeInitializes the RNG MSP. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval None + */ +__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrng); + /* NOTE : This function should not be modified. When the callback is needed, + function HAL_RNG_MspDeInit must be implemented in the user file. + */ +} + + +/** + * @} + */ + +/** @addtogroup RNG_Exported_Functions_Group2 + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Get the 16/32 bit Random number + +@endverbatim + * @{ + */ + +/** + * @brief Generates a 16/32-bit random number. + * @note Each time the random number data is read the RNG_FLAG_DRDY flag + * is automatically cleared. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @param random_number random 16/32bit pointer to generated random number variable if successful. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random_number) +{ + uint32_t tickstart; + HAL_StatusTypeDef status = HAL_OK; + + /* Process Locked */ + __HAL_LOCK(hrng); + + /* Check RNG peripheral state */ + if (hrng->State == HAL_RNG_STATE_READY) + { + /* Change RNG peripheral state */ + hrng->State = HAL_RNG_STATE_BUSY; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check if data register contains valid random data */ + while (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) + { + if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE) + { + /* New check to avoid false timeout detection in case of preemption */ + if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET) + { + hrng->State = HAL_RNG_STATE_READY; + hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT; + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + return HAL_ERROR; + } + } + } + + /* Get a 16/32bit Random number */ + hrng->RandomNumber = hrng->Instance->VAL; + *random_number = hrng->RandomNumber; + hrng->State = HAL_RNG_STATE_READY; + } + else + { + hrng->ErrorCode = HAL_RNG_ERROR_BUSY; + status = HAL_ERROR; + } + + /* Process Unlocked */ + __HAL_UNLOCK(hrng); + + return status; +} + + +/** + * @brief Read latest generated random number. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval random value + */ +uint32_t HAL_RNG_ReadLastRandomNumber(const RNG_HandleTypeDef *hrng) +{ + return (hrng->RandomNumber); +} + +/** + * @} + */ + + +/** @addtogroup RNG_Exported_Functions_Group3 + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Returns the RNG state. + * @param hrng pointer to a RNG_HandleTypeDef structure that contains + * the configuration information for RNG. + * @retval HAL state + */ +HAL_RNG_StateTypeDef HAL_RNG_GetState(const RNG_HandleTypeDef *hrng) +{ + return hrng->State; +} + +/** + * @brief Return the RNG handle error code. + * @param hrng: pointer to a RNG_HandleTypeDef structure. + * @retval RNG Error Code + */ +uint32_t HAL_RNG_GetError(const RNG_HandleTypeDef *hrng) +{ + /* Return RNG Error Code */ + return hrng->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + + +#endif /* HAL_RNG_MODULE_ENABLED */ +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rtc.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rtc.c new file mode 100644 index 0000000000..2c17d27fc0 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rtc.c @@ -0,0 +1,1692 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_rtc.c + * @author MCD Application Team + * @brief RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real-Time Clock (RTC) peripheral: + * + Initialization and de-initialization functions + * + Calendar (Time and Date) configuration functions + * + Alarm (Alarm A) configuration functions + * + Peripheral Control functions + * + Peripheral State functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### RTC Operating Condition ##### + ============================================================================== + [..] The real-time clock (RTC) and the RTC backup registers can be powered + from the VBAT voltage when the main VDD supply is powered off. + To retain the content of the RTC backup registers and supply the RTC when + VDD is turned off, VBAT pin can be connected to an optional standby + voltage supplied by a battery or by another source. + + ##### Power-On Reset ##### + ================================================================== + [..] The power-on reset sets all RTC registers to their reset values. + + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** Time and Date configuration *** + =================================== + [..] + (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime() + and HAL_RTC_SetDate() functions. + (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() + functions. + (+) To manage the RTC summer or winter time change, use the following + functions: + (++) HAL_RTC_DST_Add1Hour() or HAL_RTC_DST_Sub1Hour to add or subtract + 1 hour from the calendar time. + (++) HAL_RTC_DST_SetStoreOperation() or HAL_RTC_DST_ClearStoreOperation + to memorize whether the time change has been performed or not. + + *** Alarm configuration *** + =========================== + [..] + (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function. + You can also configure the RTC Alarm with interrupt mode using the + HAL_RTC_SetAlarm_IT() function. + (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function. + + ##### RTC and low power modes ##### + ================================================================== + [..] The MCU can be woken up from a low power mode by an RTC alternate + function. + [..] The RTC alternate functions are the RTC alarm (Alarm A), + RTC wakeup, RTC tamper event detection and RTC timestamp event detection. + These RTC alternate functions can wake up the system from the Stop and + Standby low power modes. + [..] The system can also wake up from low power modes without depending + on an external interrupt (Auto-wakeup mode), by using the RTC alarm + or the RTC wakeup events. + [..] The RTC provides a programmable time base for waking up from the + Stop or Standby mode at regular intervals. + Wakeup from STOP and STANDBY modes is possible only when the RTC clock + source is LSE or LSI. + + *** Callback registration *** + ============================================= + [..] + When the compilation define USE_HAL_RTC_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all + callbacks are set to the corresponding weak functions. + This is the recommended configuration in order to optimize memory/code + consumption footprint/performances. + [..] + The compilation define USE_HAL_RTC_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Function HAL_RTC_RegisterCallback() to register an interrupt callback. + [..] + Function HAL_RTC_RegisterCallback() allows to register following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) TimeStampEventCallback : RTC Timestamp Event callback. + (+) WakeUpTimerEventCallback : RTC WakeUpTimer Event callback. + (+) Tamper1EventCallback : RTC Tamper 1 Event callback. + (+) MspInitCallback : RTC MspInit callback. + (+) MspDeInitCallback : RTC MspDeInit callback. + [..] + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + Use function HAL_RTC_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_RTC_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) AlarmAEventCallback : RTC Alarm A Event callback. + (+) TimeStampEventCallback : RTC Timestamp Event callback. + (+) WakeUpTimerEventCallback : RTC WakeUpTimer Event callback. + (+) Tamper1EventCallback : RTC Tamper 1 Event callback. + (+) MspInitCallback : RTC MspInit callback. + (+) MspDeInitCallback : RTC MspDeInit callback. + [..] + By default, after the HAL_RTC_Init() and when the state is HAL_RTC_STATE_RESET, + all callbacks are set to the corresponding weak functions: + examples AlarmAEventCallback(), TimeStampEventCallback(). + Exception done for MspInit() and MspDeInit() callbacks that are reset to the + legacy weak function in the HAL_RTC_Init()/HAL_RTC_DeInit() only when these + callbacks are null (not registered beforehand). + If not, MspInit() or MspDeInit() are not null, HAL_RTC_Init()/HAL_RTC_DeInit() + keep and use the user MspInit()/MspDeInit() callbacks (registered beforehand). + [..] + Callbacks can be registered/unregistered in HAL_RTC_STATE_READY state only. + Exception done for MspInit() and MspDeInit() that can be registered/unregistered + in HAL_RTC_STATE_READY or HAL_RTC_STATE_RESET state. + Thus registered (user) MspInit()/MspDeInit() callbacks can be used during the + Init/DeInit. + In that case first register the MspInit()/MspDeInit() user callbacks using + HAL_RTC_RegisterCallback() before calling HAL_RTC_DeInit() or HAL_RTC_Init() + functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup RTC RTC + * @brief RTC HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RTC_Exported_Functions RTC Exported Functions + * @{ + */ + +/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to initialize and configure the + RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable + RTC registers Write protection, enter and exit the RTC initialization mode, + RTC registers synchronization check and reference clock detection enable. + (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base. + It is split into 2 programmable prescalers to minimize power consumption. + (++) A 7-bit asynchronous prescaler and a 15-bit synchronous prescaler. + (++) When both prescalers are used, it is recommended to configure the + asynchronous prescaler to a high value to minimize power consumption. + (#) All RTC registers are Write protected. Writing to the RTC registers + is enabled by writing a key into the Write Protection register, RTC_WPR. + (#) To configure the RTC Calendar, user application should enter + initialization mode. In this mode, the calendar counter is stopped + and its value can be updated. When the initialization sequence is + complete, the calendar restarts counting after 4 RTCCLK cycles. + (#) To read the calendar through the shadow registers after Calendar + initialization, calendar update or after wakeup from low power modes + the software must first clear the RSF flag. The software must then + wait until it is set again before reading the calendar, which means + that the calendar registers have been correctly copied into the + RTC_TR and RTC_DR shadow registers. The HAL_RTC_WaitForSynchro() function + implements the above software sequence (RSF clear and RSF check). + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the RTC peripheral + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check RTC handler validity */ + if (hrtc == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat)); + assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv)); + assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv)); + assert_param(IS_RTC_OUTPUT(hrtc->Init.OutPut)); + assert_param(IS_RTC_OUTPUT_REMAP(hrtc->Init.OutPutRemap)); + assert_param(IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity)); + assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType)); + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + if (hrtc->State == HAL_RTC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrtc->Lock = HAL_UNLOCKED; + + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ + hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ + hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */ + hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ + + if (hrtc->MspInitCallback == NULL) + { + hrtc->MspInitCallback = HAL_RTC_MspInit; + } + /* Init the low level hardware */ + hrtc->MspInitCallback(hrtc); + + if (hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } + } +#else /* USE_HAL_RTC_REGISTER_CALLBACKS */ + if (hrtc->State == HAL_RTC_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hrtc->Lock = HAL_UNLOCKED; + + /* Initialize RTC MSP */ + HAL_RTC_MspInit(hrtc); + } +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Check whether the calendar needs to be initialized */ + if (__HAL_RTC_IS_CALENDAR_INITIALIZED(hrtc) == 0U) + { + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + + if (status == HAL_OK) + { + /* Clear RTC_CR FMT, OSEL and POL Bits */ + hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL)); + /* Set RTC_CR register */ + hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity); + + /* Configure the RTC PRER */ + hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv); + hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << RTC_PRER_PREDIV_A_Pos); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + if (status == HAL_OK) + { + hrtc->Instance->OR &= (uint32_t)~(RTC_OUTPUT_TYPE_PUSHPULL | RTC_OUTPUT_REMAP_POS1); + hrtc->Instance->OR |= (uint32_t)(hrtc->Init.OutPutType | hrtc->Init.OutPutRemap); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + } + else + { + /* The calendar is already initialized */ + status = HAL_OK; + } + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + return status; +} + +/** + * @brief DeInitializes the RTC peripheral + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @note This function does not reset the RTC Backup Data registers. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); + + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + + if (status == HAL_OK) + { + /* Reset RTC registers */ + hrtc->Instance->TR = 0x00000000U; + hrtc->Instance->DR = (RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0); + hrtc->Instance->CR &= 0x00000000U; + hrtc->Instance->WUTR = RTC_WUTR_WUT; + hrtc->Instance->PRER = (uint32_t)(RTC_PRER_PREDIV_A | 0x000000FFU); + hrtc->Instance->ALRMAR = 0x00000000U; + hrtc->Instance->CALR = 0x00000000U; + hrtc->Instance->SHIFTR = 0x00000000U; + hrtc->Instance->ALRMASSR = 0x00000000U; + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + if (status == HAL_OK) + { + /* Reset Tamper and alternate functions configuration register */ + hrtc->Instance->TAMPCR = 0x00000000U; + + /* Reset Option register */ + hrtc->Instance->OR = 0x00000000U; + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + if (hrtc->MspDeInitCallback == NULL) + { + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + } + + /* DeInit the low level hardware: CLOCK, NVIC.*/ + hrtc->MspDeInitCallback(hrtc); +#else /* USE_HAL_RTC_REGISTER_CALLBACKS */ + /* De-Initialize RTC MSP */ + HAL_RTC_MspDeInit(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + + hrtc->State = HAL_RTC_STATE_RESET; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} + +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) +/** + * @brief Registers a User RTC Callback + * To be used instead of the weak predefined callback + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID Timestamp Event Callback ID + * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID Wakeup Timer Event Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Event Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID MSP Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID MSP DeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hrtc); + + if (HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = pCallback; + break; + + case HAL_RTC_TIMESTAMP_EVENT_CB_ID : + hrtc->TimeStampEventCallback = pCallback; + break; + + case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID : + hrtc->WakeUpTimerEventCallback = pCallback; + break; + + case HAL_RTC_TAMPER1_EVENT_CB_ID : + hrtc->Tamper1EventCallback = pCallback; + break; + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = pCallback; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Unregisters an RTC Callback + * RTC callback is redirected to the weak predefined callback + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_RTC_ALARM_A_EVENT_CB_ID Alarm A Event Callback ID + * @arg @ref HAL_RTC_TIMESTAMP_EVENT_CB_ID Timestamp Event Callback ID + * @arg @ref HAL_RTC_WAKEUPTIMER_EVENT_CB_ID Wakeup Timer Event Callback ID + * @arg @ref HAL_RTC_TAMPER1_EVENT_CB_ID Tamper 1 Event Callback ID + * @arg @ref HAL_RTC_MSPINIT_CB_ID MSP Init callback ID + * @arg @ref HAL_RTC_MSPDEINIT_CB_ID MSP DeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hrtc); + + if (HAL_RTC_STATE_READY == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_ALARM_A_EVENT_CB_ID : + hrtc->AlarmAEventCallback = HAL_RTC_AlarmAEventCallback; /* Legacy weak AlarmAEventCallback */ + break; + + case HAL_RTC_TIMESTAMP_EVENT_CB_ID : + hrtc->TimeStampEventCallback = HAL_RTCEx_TimeStampEventCallback; /* Legacy weak TimeStampEventCallback */ + break; + + case HAL_RTC_WAKEUPTIMER_EVENT_CB_ID : + hrtc->WakeUpTimerEventCallback = HAL_RTCEx_WakeUpTimerEventCallback; /* Legacy weak WakeUpTimerEventCallback */ + break; + + case HAL_RTC_TAMPER1_EVENT_CB_ID : + hrtc->Tamper1EventCallback = HAL_RTCEx_Tamper1EventCallback; /* Legacy weak Tamper1EventCallback */ + break; + + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_RTC_STATE_RESET == hrtc->State) + { + switch (CallbackID) + { + case HAL_RTC_MSPINIT_CB_ID : + hrtc->MspInitCallback = HAL_RTC_MspInit; + break; + + case HAL_RTC_MSPDEINIT_CB_ID : + hrtc->MspDeInitCallback = HAL_RTC_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hrtc); + + return status; +} +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + +/** + * @brief Initializes the RTC MSP. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_RTC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the RTC MSP. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_RTC_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions + * @brief RTC Time and Date functions + * +@verbatim + =============================================================================== + ##### RTC Time and Date functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Time and Date features + +@endverbatim + * @{ + */ + +/** + * @brief Sets RTC current time. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTime Pointer to Time structure + * @note DayLightSaving and StoreOperation interfaces are deprecated. + * To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions. + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg = 0U; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving)); + assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if (Format == RTC_FORMAT_BIN) + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sTime->Hours)); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sTime->Hours)); + } + assert_param(IS_RTC_MINUTES(sTime->Minutes)); + assert_param(IS_RTC_SECONDS(sTime->Seconds)); + + tmpreg = (uint32_t)(( (uint32_t)RTC_ByteToBcd2(sTime->Hours) << RTC_TR_HU_Pos) | \ + ( (uint32_t)RTC_ByteToBcd2(sTime->Minutes) << RTC_TR_MNU_Pos) | \ + ( (uint32_t)RTC_ByteToBcd2(sTime->Seconds)) | \ + (((uint32_t)sTime->TimeFormat) << RTC_TR_PM_Pos)); + } + else + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sTime->Hours))); + assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); + } + else + { + sTime->TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours))); + } + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds))); + tmpreg = (((uint32_t)(sTime->Hours) << RTC_TR_HU_Pos) | \ + ((uint32_t)(sTime->Minutes) << RTC_TR_MNU_Pos) | \ + ((uint32_t) sTime->Seconds) | \ + ((uint32_t)(sTime->TimeFormat) << RTC_TR_PM_Pos)); + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + + if (status == HAL_OK) + { + /* Set the RTC_TR register */ + hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK); + + /* Clear the bits to be configured (Deprecated. Use HAL_RTC_DST_xxx functions instead) */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_BKP; + + /* Configure the RTC_CR register (Deprecated. Use HAL_RTC_DST_xxx functions instead) */ + hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Gets RTC current time. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTime Pointer to Time structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @note You can use SubSeconds and SecondFraction (sTime structure fields + * returned) to convert SubSeconds value in second fraction ratio with + * time unit following generic formula: + * Second fraction ratio * time_unit = + * [(SecondFraction - SubSeconds) / (SecondFraction + 1)] * time_unit + * This conversion can be performed only if no shift operation is pending + * (ie. SHFP=0) when PREDIV_S >= SS + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the + * values in the higher-order calendar shadow registers to ensure + * consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers + * until current date is read to ensure consistency between the time and + * date values. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) +{ + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get subseconds value from the corresponding register */ + sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR); + + /* Get SecondFraction structure field from the corresponding register field*/ + sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S); + + /* Get the TR register */ + tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> RTC_TR_HU_Pos); + sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >> RTC_TR_MNU_Pos); + sTime->Seconds = (uint8_t)( tmpreg & (RTC_TR_ST | RTC_TR_SU)); + sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> RTC_TR_PM_Pos); + + /* Check the input parameters format */ + if (Format == RTC_FORMAT_BIN) + { + /* Convert the time structure parameters to Binary format */ + sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours); + sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes); + sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds); + } + + return HAL_OK; +} + +/** + * @brief Sets RTC current date. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sDate Pointer to date structure + * @param Format specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg = 0U; + HAL_StatusTypeDef status; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + if ((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10U) == 0x10U)) + { + sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10U)) + (uint8_t)0x0AU); + } + + assert_param(IS_RTC_WEEKDAY(sDate->WeekDay)); + + if (Format == RTC_FORMAT_BIN) + { + assert_param(IS_RTC_YEAR(sDate->Year)); + assert_param(IS_RTC_MONTH(sDate->Month)); + assert_param(IS_RTC_DATE(sDate->Date)); + + datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << RTC_DR_YU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Month) << RTC_DR_MU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sDate->Date)) | \ + ((uint32_t)sDate->WeekDay << RTC_DR_WDU_Pos)); + } + else + { + assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year))); + assert_param(IS_RTC_MONTH(RTC_Bcd2ToByte(sDate->Month))); + assert_param(IS_RTC_DATE(RTC_Bcd2ToByte(sDate->Date))); + + datetmpreg = ((((uint32_t)sDate->Year) << RTC_DR_YU_Pos) | \ + (((uint32_t)sDate->Month) << RTC_DR_MU_Pos) | \ + ((uint32_t) sDate->Date) | \ + (((uint32_t)sDate->WeekDay) << RTC_DR_WDU_Pos)); + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Enter Initialization mode */ + status = RTC_EnterInitMode(hrtc); + + if (status == HAL_OK) + { + /* Set the RTC_DR register */ + hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK); + + /* Exit Initialization mode */ + status = RTC_ExitInitMode(hrtc); + } + + if (status == HAL_OK) + { + hrtc->State = HAL_RTC_STATE_READY; + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return status; +} + +/** + * @brief Gets RTC current date. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sDate Pointer to Date structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the + * values in the higher-order calendar shadow registers to ensure + * consistency between the time and date values. + * Reading RTC current time locks the values in calendar shadow registers + * until current date is read to ensure consistency between the time and + * date values. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format) +{ + uint32_t datetmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the DR register */ + datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK); + + /* Fill the structure fields with the read parameters */ + sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> RTC_DR_YU_Pos); + sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> RTC_DR_MU_Pos); + sDate->Date = (uint8_t) (datetmpreg & (RTC_DR_DT | RTC_DR_DU)); + sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> RTC_DR_WDU_Pos); + + /* Check the input parameters format */ + if (Format == RTC_FORMAT_BIN) + { + /* Convert the date structure parameters to Binary format */ + sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year); + sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month); + sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date); + } + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions + * @brief RTC Alarm functions + * +@verbatim + =============================================================================== + ##### RTC Alarm functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Alarm feature + +@endverbatim + * @{ + */ +/** + * @brief Sets the specified RTC Alarm. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sAlarm Pointer to Alarm structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use the HAL_RTC_DeactivateAlarm()). + * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + uint32_t tickstart = 0U; + uint32_t tmpreg = 0U; + uint32_t subsecondtmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state to BUSY */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Check the data format (binary or BCD) and store the Alarm time and date + configuration accordingly */ + if (Format == RTC_FORMAT_BIN) + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t) sAlarm->AlarmTime.Seconds) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t) sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t) sAlarm->AlarmMask)); + } + + /* Store the Alarm subseconds configuration */ + subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | \ + (uint32_t)(sAlarm->AlarmSubSecondMask)); + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Disable Alarm A */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* In case interrupt mode is used, the interrupt source must be disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + /* Clear Alarm A flag */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till RTC ALRAWF flag is set and if timeout is reached exit */ + while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Configure Alarm A register */ + hrtc->Instance->ALRMAR = (uint32_t)tmpreg; + /* Configure Alarm A Subseconds register */ + hrtc->Instance->ALRMASSR = subsecondtmpreg; + /* Enable Alarm A */ + __HAL_RTC_ALARMA_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state back to READY */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Sets the specified RTC Alarm with Interrupt. + * @note The application must ensure that the RTC interrupt line is configured via HAL SYSCFG services and the PWR_WAKEUP_PIN_RTC bit is set. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sAlarm Pointer to Alarm structure + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use the HAL_RTC_DeactivateAlarm()). + * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) +{ + __IO uint32_t count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U); + uint32_t tmpreg = 0U; + uint32_t subsecondtmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(sAlarm->Alarm)); + assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask)); + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); + assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); + assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state to BUSY */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Check the data format (binary or BCD) and store the Alarm time and date + configuration accordingly */ + if (Format == RTC_FORMAT_BIN) + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); + } + assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); + assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); + + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); + } + + tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t)sAlarm->AlarmMask)); + } + else + { + if ((hrtc->Instance->CR & RTC_CR_FMT) != 0U) + { + assert_param(IS_RTC_HOUR12(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); + } + else + { + sAlarm->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); + } + + assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); + assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); + + if (sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + else + { + assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay))); + } + + tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << RTC_ALRMAR_HU_Pos) | \ + ((uint32_t)(sAlarm->AlarmTime.Minutes) << RTC_ALRMAR_MNU_Pos) | \ + ((uint32_t) sAlarm->AlarmTime.Seconds) | \ + ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << RTC_ALRMAR_PM_Pos) | \ + ((uint32_t)(sAlarm->AlarmDateWeekDay) << RTC_ALRMAR_DU_Pos) | \ + ((uint32_t) sAlarm->AlarmDateWeekDaySel) | \ + ((uint32_t) sAlarm->AlarmMask)); + } + + /* Store the Alarm subseconds configuration */ + subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | \ + (uint32_t)(sAlarm->AlarmSubSecondMask)); + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Disable Alarm A */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* Clear Alarm A flag */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Wait till RTC ALRAWF flag is set and if timeout is reached exit */ + do + { + count = count - 1U; + if (count == 0U) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U); + + /* Configure Alarm A register */ + hrtc->Instance->ALRMAR = (uint32_t)tmpreg; + /* Configure Alarm A Subseconds register */ + hrtc->Instance->ALRMASSR = subsecondtmpreg; + /* Enable Alarm A */ + __HAL_RTC_ALARMA_ENABLE(hrtc); + /* Enable Alarm A interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRA); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state back to READY */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates the specified RTC Alarm. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Alarm Specifies the Alarm. + * This parameter can be: + * @arg RTC_ALARM_A: Alarm A + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm) +{ + uint32_t tickstart = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_ALARM(Alarm)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Disable Alarm A */ + __HAL_RTC_ALARMA_DISABLE(hrtc); + + /* In case interrupt mode is used, the interrupt source must be disabled */ + __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till RTC ALRAWF flag is set and if timeout is reached exit */ + while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Gets the RTC Alarm value and masks. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sAlarm Pointer to Date structure + * @param Alarm Specifies the Alarm. + * This parameter can be: + * @arg RTC_ALARM_A: Alarm A + * @param Format Specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format) +{ + uint32_t tmpreg = 0U; + uint32_t subsecondtmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + assert_param(IS_RTC_ALARM(Alarm)); + + sAlarm->Alarm = RTC_ALARM_A; + + tmpreg = (uint32_t)(hrtc->Instance->ALRMAR); + subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR) & RTC_ALRMASSR_SS); + + /* Fill the structure with the read parameters */ + sAlarm->AlarmTime.Hours = (uint8_t) ((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> RTC_ALRMAR_HU_Pos); + sAlarm->AlarmTime.Minutes = (uint8_t) ((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> RTC_ALRMAR_MNU_Pos); + sAlarm->AlarmTime.Seconds = (uint8_t) ( tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU)); + sAlarm->AlarmTime.TimeFormat = (uint8_t) ((tmpreg & RTC_ALRMAR_PM) >> RTC_TR_PM_Pos); + sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; + sAlarm->AlarmDateWeekDay = (uint8_t) ((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> RTC_ALRMAR_DU_Pos); + sAlarm->AlarmDateWeekDaySel = (uint32_t) (tmpreg & RTC_ALRMAR_WDSEL); + sAlarm->AlarmMask = (uint32_t) (tmpreg & RTC_ALARMMASK_ALL); + + if (Format == RTC_FORMAT_BIN) + { + sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); + sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes); + sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds); + sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); + } + + return HAL_OK; +} + +/** + * @brief Handles Alarm interrupt request. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the Alarm A interrupt source enable status */ + if (__HAL_RTC_ALARM_GET_IT_SOURCE(hrtc, RTC_IT_ALRA) != 0U) + { + /* Get the pending status of the Alarm A Interrupt */ + if (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) != 0U) + { + /* Clear the Alarm A interrupt pending bit */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Alarm A callback */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + hrtc->AlarmAEventCallback(hrtc); +#else + HAL_RTC_AlarmAEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Alarm A callback. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_RTC_AlarmAEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handles Alarm A Polling request. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = 0U; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till RTC ALRAF flag is set and if timeout is reached exit */ + while (__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == 0U) + { + if (Timeout != HAL_MAX_DELAY) + { + if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Alarm flag */ + __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Wait for RTC Time and Date Synchronization + (+) Manage RTC Summer or Winter time change + +@endverbatim + * @{ + */ + +/** + * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @note To read the calendar through the shadow registers after Calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart = 0U; + + /* Clear RSF flag, keep reserved bits at reset values (setting other flags has no effect) */ + hrtc->Instance->ISR = ((uint32_t)(RTC_RSF_MASK & RTC_ISR_RESERVED_MASK)); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait the registers to be synchronised */ + while ((hrtc->Instance->ISR & RTC_ISR_RSF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + return HAL_TIMEOUT; + } + } + + return HAL_OK; +} + +/** + * @brief Daylight Saving Time, adds one hour to the calendar in one + * single operation without going through the initialization procedure. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc) +{ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + SET_BIT(hrtc->Instance->CR, RTC_CR_ADD1H); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief Daylight Saving Time, subtracts one hour from the calendar in one + * single operation without going through the initialization procedure. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc) +{ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + SET_BIT(hrtc->Instance->CR, RTC_CR_SUB1H); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief Daylight Saving Time, sets the store operation bit. + * @note It can be used by the software in order to memorize the DST status. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc) +{ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + SET_BIT(hrtc->Instance->CR, RTC_CR_BKP); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief Daylight Saving Time, clears the store operation bit. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc) +{ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + CLEAR_BIT(hrtc->Instance->CR, RTC_CR_BKP); + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief Daylight Saving Time, reads the store operation bit. + * @param hrtc RTC handle + * @retval operation see RTC_StoreOperation_Definitions + */ +uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc) +{ + return READ_BIT(hrtc->Instance->CR, RTC_CR_BKP); +} + +/** + * @} + */ + +/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Get RTC state + +@endverbatim + * @{ + */ +/** + * @brief Returns the RTC state. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL state + */ +HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc) +{ + return hrtc->State; +} + +/** + * @} + */ + + +/** + * @} + */ + +/** @addtogroup RTC_Private_Functions + * @{ + */ + +/** + * @brief Enters the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart = 0U; + HAL_StatusTypeDef status = HAL_OK; + + /* Check that Initialization mode is not already set */ + if (READ_BIT(hrtc->Instance->ISR, RTC_ISR_INITF) == 0U) + { + /* Set INIT bit to enter Initialization mode */ + SET_BIT(hrtc->Instance->ISR, RTC_ISR_INIT); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till RTC is in INIT state and if timeout is reached exit */ + while ((READ_BIT(hrtc->Instance->ISR, RTC_ISR_INITF) == 0U) && (status != HAL_ERROR)) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + status = HAL_ERROR; + } + } + } + + return status; +} + +/** + * @brief Exits the RTC Initialization mode. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef RTC_ExitInitMode(RTC_HandleTypeDef *hrtc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Clear INIT bit to exit Initialization mode */ + CLEAR_BIT(hrtc->Instance->ISR, RTC_ISR_INIT); + + /* If CR_BYPSHAD bit = 0, wait for synchro */ + if (READ_BIT(hrtc->Instance->CR, RTC_CR_BYPSHAD) == 0U) + { + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Set RTC state */ + hrtc->State = HAL_RTC_STATE_ERROR; + status = HAL_ERROR; + } + } + + return status; +} + +/** + * @brief Converts a 2-digit number from decimal to BCD format. + * @param number decimal-formatted number (from 0 to 99) to be converted + * @retval Converted byte + */ +uint8_t RTC_ByteToBcd2(uint8_t number) +{ + uint32_t bcdhigh = 0U; + + while (number >= 10U) + { + bcdhigh++; + number -= 10U; + } + + return ((uint8_t)(bcdhigh << 4U) | number); +} + +/** + * @brief Converts a 2-digit number from BCD to decimal format. + * @param number BCD-formatted number (from 00 to 99) to be converted + * @retval Converted word + */ +uint8_t RTC_Bcd2ToByte(uint8_t number) +{ + uint32_t tens = 0U; + tens = (((uint32_t)number & 0xF0U) >> 4U) * 10U; + return (uint8_t)(tens + ((uint32_t)number & 0x0FU)); +} + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rtc_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rtc_ex.c new file mode 100644 index 0000000000..3203aa7982 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_rtc_ex.c @@ -0,0 +1,1632 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_rtc_ex.c + * @author MCD Application Team + * @brief Extended RTC HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Real-Time Clock (RTC) Extended peripheral: + * + RTC Timestamp functions + * + RTC Tamper functions + * + RTC Wakeup functions + * + Extended Control functions + * + Extended RTC features functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour + format using the HAL_RTC_Init() function. + + *** RTC Wakeup configuration *** + ================================ + [..] + (+) To configure the RTC Wakeup Clock source and Counter use the + HAL_RTCEx_SetWakeUpTimer() function. + You can also configure the RTC Wakeup timer in interrupt mode using the + HAL_RTCEx_SetWakeUpTimer_IT() function. + (+) To read the RTC Wakeup Counter register, use the HAL_RTCEx_GetWakeUpTimer() + function. + + *** Timestamp configuration *** + =============================== + [..] + (+) To configure the RTC Timestamp use the HAL_RTCEx_SetTimeStamp() function. + You can also configure the RTC Timestamp with interrupt mode using the + HAL_RTCEx_SetTimeStamp_IT() function. + (+) To read the RTC Timestamp Time and Date register, use the + HAL_RTCEx_GetTimeStamp() function. + (+) The Timestamp alternate function is mapped to RTC_AF1 (). + + *** Internal Timestamp configuration *** + =============================== + [..] + (+) To enable the RTC internal Timestamp use the HAL_RTCEx_SetInternalTimeStamp() + function. + (+) To read the RTC Timestamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() + function. + + *** Tamper configuration *** + ============================ + [..] + (+) To enable the RTC Tamper and configure the Tamper filter count, trigger + Edge or Level according to the Tamper filter value (if equal to 0 Edge + else Level), sampling frequency, NoErase, MaskFlag, precharge or + discharge and Pull-UP use the HAL_RTCEx_SetTamper() function. + You can configure RTC Tamper in interrupt mode using HAL_RTCEx_SetTamper_IT() + function. + (+) The default configuration of the Tamper erases the backup registers. + To avoid this, enable the NoErase field on the RTC_TAMPCR register. + (+) The TAMPER1 alternate function is mapped to RTC_AF1 (). + + *** Backup Data Registers configuration *** + =========================================== + [..] + (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite() + function. + (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead() + function. + + *** Smooth Digital Calibration configuration *** + ================================================ + [..] + (+) RTC frequency can be digitally calibrated with a resolution of about + 0.954 ppm with a range from -487.1 ppm to +488.5 ppm. + The correction of the frequency is performed using a series of small + adjustments (adding and/or subtracting individual RTCCLK pulses). + (+) The smooth digital calibration is performed during a cycle of about 2^20 + RTCCLK pulses (or 32 seconds) when the input frequency is 32,768 Hz. + This cycle is maintained by a 20-bit counter clocked by RTCCLK. + (+) The smooth calibration register (RTC_CALR) specifies the number of RTCCLK + clock cycles to be masked during the 32-second cycle. + (+) To configure the RTC Smooth Digital Calibration value and the corresponding + calibration cycle period (32s,16s and 8s) use the HAL_RTCEx_SetSmoothCalib() + function. + + *** Outputs configuration *** + ============================= + [..] The RTC has 2 different outputs: + (+) RTC_ALARM: this output is used to manage the RTC alarm A + and WaKeUp signals. + To output the selected RTC signal, use the HAL_RTC_Init() function. + (+) RTC_CALIB: this output is 512Hz signal or 1Hz. + To enable the RTC_CALIB, use the HAL_RTCEx_SetCalibrationOutPut() function. + (+) Two pins can be used as RTC_ALARM or RTC_CALIB output, selected through + bit OUT_RMP of the RTC_OR register: + - (PA8, PA9) + (+) When the RTC_CALIB or RTC_ALARM output is selected, the RTC_OUT pin is + automatically configured in output alternate function. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup RTCEx RTCEx + * @brief RTC Extended HAL module driver + * @{ + */ + +#ifdef HAL_RTC_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions + * @{ + */ + +/** @defgroup RTCEx_Exported_Functions_Group1 RTC Timestamp and Tamper functions + * @brief RTC Timestamp and Tamper functions + * +@verbatim + =============================================================================== + ##### RTC Timestamp and Tamper functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Timestamp feature + +@endverbatim + * @{ + */ + +/** + * @brief Sets Timestamp. + * @note This API must be called before enabling the Timestamp feature. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param RTC_TimeStampEdge Specifies the pin edge on which the Timestamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Timestamp event occurs on + * the rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Timestamp event occurs on + * the falling edge of the related pin. + * @param RTC_TimeStampPin Specifies the RTC Timestamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPPIN_: is selected as RTC Timestamp Pin. + * @note Although unused, parameter RTC_TimeStampPin has been kept for portability + * reasons. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin) +{ + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_TIMESTAMP_EDGE(RTC_TimeStampEdge)); + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + + /* Prevent compilation warning due to unused argument(s) if assert_param check + is disabled */ + UNUSED(RTC_TimeStampPin); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state to BUSY */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + /* Configure the Timestamp TSEDGE bit */ + tmpreg |= RTC_TimeStampEdge; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Copy the desired configuration into the CR register */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + /* Clear RTC Timestamp flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); + + /* Clear RTC Timestamp overrun Flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); + + /* Enable the Timestamp saving */ + __HAL_RTC_TIMESTAMP_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state back to READY */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Sets Timestamp with Interrupt. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @note This API must be called before enabling the Timestamp feature. + * @param RTC_TimeStampEdge Specifies the pin edge on which the Timestamp is + * activated. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPEDGE_RISING: the Timestamp event occurs on + * the rising edge of the related pin. + * @arg RTC_TIMESTAMPEDGE_FALLING: the Timestamp event occurs on + * the falling edge of the related pin. + * @param RTC_TimeStampPin Specifies the RTC Timestamp Pin. + * This parameter can be one of the following values: + * @arg RTC_TIMESTAMPPIN_: is selected as RTC Timestamp Pin. + * @note Although unused, parameter RTC_TimeStampPin has been kept for portability + * reasons. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t RTC_TimeStampEdge, uint32_t RTC_TimeStampPin) +{ + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_TIMESTAMP_EDGE(RTC_TimeStampEdge)); + assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); + + /* Prevent compilation warning due to unused argument(s) if assert_param check + is disabled */ + UNUSED(RTC_TimeStampPin); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + /* Change RTC state to BUSY */ + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + /* Configure the Timestamp TSEDGE bit */ + tmpreg |= RTC_TimeStampEdge; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Copy the desired configuration into the CR register */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + /* Clear RTC Timestamp flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); + + /* Clear RTC Timestamp overrun Flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); + + /* Enable the Timestamp saving */ + __HAL_RTC_TIMESTAMP_ENABLE(hrtc); + + /* Enable IT Timestamp */ + __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc, RTC_IT_TS); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state back to READY */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates Timestamp. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc) +{ + uint32_t tmpreg = 0U; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* In case interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS); + + /* Get the RTC_CR register and clear the bits to be configured */ + tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); + + /* Configure the Timestamp TSEDGE and Enable bits */ + hrtc->Instance->CR = (uint32_t)tmpreg; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Sets Internal Timestamp. + * @note This API must be called before enabling the internal Timestamp feature. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Clear the internal Timestamp flag */ + __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_ITSF); + + /* Configure the internal Timestamp Enable bits */ + __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates internal Timestamp. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Configure the internal Timestamp Enable bits */ + __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Gets the RTC Timestamp value. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTimeStamp Pointer to Time structure + * @param sTimeStampDate Pointer to Date structure + * @param Format specifies the format of the entered parameters. + * This parameter can be one of the following values: + * @arg RTC_FORMAT_BIN: Binary data format + * @arg RTC_FORMAT_BCD: BCD data format + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format) +{ + uint32_t tmptime = 0U; + uint32_t tmpdate = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_FORMAT(Format)); + + /* Get the Timestamp time and date registers values */ + tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK); + tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK); + + /* Fill the Time structure fields with the read parameters */ + sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TSTR_HT | RTC_TSTR_HU)) >> RTC_TSTR_HU_Pos); + sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TSTR_MNT | RTC_TSTR_MNU)) >> RTC_TSTR_MNU_Pos); + sTimeStamp->Seconds = (uint8_t)((tmptime & (RTC_TSTR_ST | RTC_TSTR_SU)) >> RTC_TSTR_SU_Pos); + sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TSTR_PM)) >> RTC_TSTR_PM_Pos); + sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR; + + /* Fill the Date structure fields with the read parameters */ + sTimeStampDate->Year = 0U; + sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_TSDR_MT | RTC_TSDR_MU)) >> RTC_TSDR_MU_Pos); + sTimeStampDate->Date = (uint8_t)((tmpdate & (RTC_TSDR_DT | RTC_TSDR_DU)) >> RTC_TSDR_DU_Pos); + sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_TSDR_WDU)) >> RTC_TSDR_WDU_Pos); + + /* Check the input parameters format */ + if (Format == RTC_FORMAT_BIN) + { + /* Convert the Timestamp structure parameters to Binary format */ + sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours); + sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes); + sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds); + + /* Convert the DateTimeStamp structure parameters to Binary format */ + sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month); + sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date); + sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay); + } + + /* Clear the internal Timestamp Flag */ + __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_ITSF); + + /* Clear the Timestamp Flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); + + return HAL_OK; +} + +/** + * @brief Sets Tamper. + * @note By calling this API the tamper global interrupt will be disabled and + * the selected tamper's interrupt as well. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTamper Pointer to Tamper Structure. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper) +{ + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); + assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag)); + assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); + assert_param(IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(sTamper->Filter, sTamper->Trigger)); + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); + assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Copy control register into temporary variable */ + tmpreg = hrtc->Instance->TAMPCR; + + /* Enable selected tamper */ + tmpreg |= (sTamper->Tamper); + + /* Configure the tamper trigger bit (this bit is just on the right of the + tamper enable bit, hence the one-time right shift before updating it) */ + if (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE) + { + /* Set the tamper trigger bit (case of falling edge or high level) */ + tmpreg |= (uint32_t)(sTamper->Tamper << 1U); + } + else + { + /* Clear the tamper trigger bit (case of rising edge or low level) */ + tmpreg &= (uint32_t)~(sTamper->Tamper << 1U); + } + + /* Configure the backup registers erasure enabling bits */ + if (sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + if ((sTamper->Tamper & RTC_TAMPER_1) != 0U) + { + tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP1NOERASE); + } + } + else + { + if ((sTamper->Tamper & RTC_TAMPER_1) != 0U) + { + tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP1NOERASE); + } + } + + /* Configure the tamper flags masking bits */ + if (sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) + { + if ((sTamper->Tamper & RTC_TAMPER_1) != 0U) + { + tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP1MF); + } + } + else + { + if ((sTamper->Tamper & RTC_TAMPER_1) != 0U) + { + tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP1MF); + } + } + + /* Clear remaining fields before setting them */ + tmpreg &= ~(RTC_TAMPERFILTER_MASK | \ + RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK | \ + RTC_TAMPERPRECHARGEDURATION_MASK | \ + RTC_TAMPER_PULLUP_MASK | \ + RTC_TIMESTAMPONTAMPERDETECTION_MASK); + + /* Set remaining parameters of desired configuration into temporary variable */ + tmpreg |= ((uint32_t)sTamper->Filter | \ + (uint32_t)sTamper->SamplingFrequency | \ + (uint32_t)sTamper->PrechargeDuration | \ + (uint32_t)sTamper->TamperPullUp | \ + (uint32_t)sTamper->TimeStampOnTamperDetection); + + /* Disable interrupt on selected tamper in case it is enabled */ + if ((sTamper->Tamper & RTC_TAMPER_1) != 0U) + { + tmpreg &= (uint32_t)~RTC_IT_TAMP1; + } + + /* Disable tamper global interrupt in case it is enabled */ + tmpreg &= (uint32_t)~RTC_TAMPCR_TAMPIE; + + /* Copy desired configuration into configuration register */ + hrtc->Instance->TAMPCR = tmpreg; + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Sets Tamper with interrupt. + * @note By setting the tamper global interrupt bit, interrupts will be + * enabled for all tampers. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param sTamper Pointer to RTC Tamper. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper) +{ + uint32_t tmpreg = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_TAMPER(sTamper->Tamper)); + assert_param(IS_RTC_TAMPER_INTERRUPT(sTamper->Interrupt)); + assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); + assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); + assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag)); + assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); + assert_param(IS_RTC_TAMPER_FILTER_CONFIG_CORRECT(sTamper->Filter, sTamper->Trigger)); + assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); + assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); + assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); + assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Copy control register into temporary variable */ + tmpreg = hrtc->Instance->TAMPCR; + + /* Enable selected tamper */ + tmpreg |= (sTamper->Tamper); + + /* Configure the tamper trigger bit (this bit is just on the right of the + tamper enable bit, hence the one-time right shift before updating it) */ + if (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE) + { + /* Set the tamper trigger bit (case of falling edge or high level) */ + tmpreg |= (uint32_t)(sTamper->Tamper << 1U); + } + else + { + /* Clear the tamper trigger bit (case of rising edge or low level) */ + tmpreg &= (uint32_t)~(sTamper->Tamper << 1U); + } + + /* Configure the backup registers erasure enabling bits */ + if (sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) + { + if ((sTamper->Tamper & RTC_TAMPER_1) != 0U) + { + tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP1NOERASE); + } + } + else + { + if ((sTamper->Tamper & RTC_TAMPER_1) != 0U) + { + tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP1NOERASE); + } + } + + /* Configure the tamper flags masking bits */ + if (sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) + { + if ((sTamper->Tamper & RTC_TAMPER_1) != 0U) + { + tmpreg |= (uint32_t)(RTC_TAMPCR_TAMP1MF); + } + } + else + { + if ((sTamper->Tamper & RTC_TAMPER_1) != 0U) + { + tmpreg &= (uint32_t)~(RTC_TAMPCR_TAMP1MF); + } + } + + /* Clear remaining fields before setting them */ + tmpreg &= ~(RTC_TAMPERFILTER_MASK | \ + RTC_TAMPERSAMPLINGFREQ_RTCCLK_MASK | \ + RTC_TAMPERPRECHARGEDURATION_MASK | \ + RTC_TAMPER_PULLUP_MASK | \ + RTC_TIMESTAMPONTAMPERDETECTION_MASK); + + /* Set remaining parameters of desired configuration into temporary variable */ + tmpreg |= ((uint32_t)sTamper->Filter | \ + (uint32_t)sTamper->SamplingFrequency | \ + (uint32_t)sTamper->PrechargeDuration | \ + (uint32_t)sTamper->TamperPullUp | \ + (uint32_t)sTamper->TimeStampOnTamperDetection); + + /* Enable interrupt on selected tamper */ + tmpreg |= (uint32_t)sTamper->Interrupt; + + /* Copy desired configuration into configuration register */ + hrtc->Instance->TAMPCR = tmpreg; + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates Tamper. + * @note By calling this API the tamper global interrupt will be disabled. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Tamper Selected tamper pin. + * This parameter can be: + * @arg RTC_TAMPER_1: Tamper 1 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper) +{ + assert_param(IS_RTC_TAMPER(Tamper)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the selected Tamper pin */ + hrtc->Instance->TAMPCR &= (uint32_t)~Tamper; + + if ((Tamper & RTC_TAMPER_1) != 0U) + { + /* Disable the Tamper 1 interrupt */ + hrtc->Instance->TAMPCR &= (uint32_t)~(RTC_IT_TAMP | RTC_IT_TAMP1); + } + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Handles Timestamp and Tamper interrupt request. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the Timestamp interrupt source enable status */ + if (__HAL_RTC_TIMESTAMP_GET_IT_SOURCE(hrtc, RTC_IT_TS) != 0U) + { + /* Get the pending status of the Timestamp Interrupt */ + if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) != 0U) + { + /* Timestamp callback */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + hrtc->TimeStampEventCallback(hrtc); +#else + HAL_RTCEx_TimeStampEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + + /* Clear the Timestamp interrupt pending bit after returning from callback + as RTC_TSTR and RTC_TSDR registers are cleared when TSF bit is reset */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); + } + } + + /* Get the Tamper 1 interrupt source enable status */ + if (__HAL_RTC_TAMPER_GET_IT_SOURCE(hrtc, RTC_IT_TAMP | RTC_IT_TAMP1) != 0U) + { + /* Get the pending status of the Tamper 1 Interrupt */ + if (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) != 0U) + { + /* Clear the Tamper interrupt pending bit */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); + + /* Tamper callback */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + hrtc->Tamper1EventCallback(hrtc); +#else + HAL_RTCEx_Tamper1EventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Timestamp callback. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file + */ +} + +/** + * @brief Tamper 1 callback. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file + */ +} + +/** + * @brief Handles Timestamp polling request. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = 0U; + + /* Get tick */ + tickstart = HAL_GetTick(); + + while (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == 0U) + { + if (Timeout != HAL_MAX_DELAY) + { + if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + + if (__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != 0U) + { + /* Clear the Timestamp Overrun Flag */ + __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); + + /* Change Timestamp state */ + hrtc->State = HAL_RTC_STATE_ERROR; + + return HAL_ERROR; + } + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Handles Tamper 1 Polling. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = 0U; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Get the status of the Interrupt */ + while (__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F) == 0U) + { + if (Timeout != HAL_MAX_DELAY) + { + if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Tamper Flag */ + __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP1F); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group2 RTC Wakeup functions + * @brief RTC Wakeup functions + * +@verbatim + =============================================================================== + ##### RTC Wakeup functions ##### + =============================================================================== + + [..] This section provides functions allowing to configure Wakeup feature + +@endverbatim + * @{ + */ + +/** + * @brief Sets wakeup timer. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param WakeUpCounter Wakeup counter + * @param WakeUpClock Wakeup clock + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) +{ + uint32_t tickstart = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); + assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Check RTC WUTWF flag is reset only when wakeup timer enabled*/ + if ((hrtc->Instance->CR & RTC_CR_WUTE) != 0U) + { + tickstart = HAL_GetTick(); + + /* Wait till RTC WUTWF flag is reset and if timeout is reached exit */ + while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) != 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Disable the Wakeup timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); + + /* Clear the Wakeup flag */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till RTC WUTWF flag is set and if timeout is reached exit */ + while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Clear the Wakeup Timer clock source bits in CR register */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + hrtc->Instance->CR |= (uint32_t)WakeUpClock; + + /* Configure the Wakeup Timer counter */ + hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; + + /* Enable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Sets wakeup timer with interrupt. + * @note The application must ensure that the RTC interrupt line is configured via HAL SYSCFG services and the PWR_WAKEUP_PIN_RTC bit is set. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param WakeUpCounter Wakeup counter + * @param WakeUpClock Wakeup clock + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) +{ + __IO uint32_t count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U); + + /* Check the parameters */ + assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); + assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Check RTC WUTWF flag is reset only when wakeup timer enabled */ + if ((hrtc->Instance->CR & RTC_CR_WUTE) != 0U) + { + /* Wait till RTC WUTWF flag is reset and if timeout is reached exit */ + do + { + count = count - 1U; + if (count == 0U) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) != 0U); + } + + /* Disable the Wakeup timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); + + /* Clear the Wakeup flag */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + + /* Reload the counter */ + count = RTC_TIMEOUT_VALUE * (SystemCoreClock / 32U / 1000U); + + /* Wait till RTC WUTWF flag is set and if timeout is reached exit */ + do + { + count = count - 1U; + if (count == 0U) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U); + + /* Clear the Wakeup Timer clock source bits in CR register */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + hrtc->Instance->CR |= (uint32_t)WakeUpClock; + + /* Configure the Wakeup Timer counter */ + hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; + + /* Configure the interrupt in the RTC_CR register */ + __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc, RTC_IT_WUT); + + /* Enable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates wakeup timer counter. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc) +{ + uint32_t tickstart = 0U; + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Disable the Wakeup Timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); + + /* In case interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc, RTC_IT_WUT); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait till RTC WUTWF flag is set and if timeout is reached exit */ + while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Gets wakeup timer counter. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval Counter value + */ +uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc) +{ + /* Get the counter value */ + return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT)); +} + +/** + * @brief Handles Wakeup Timer interrupt request. + * @note Unlike tamper interrupt line (shared by Timestamp and tampers) + * wakeup timer interrupt line is exclusive to the wakeup timer. + * There is no need in this case to check on the interrupt enable + * status via __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(). + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc) +{ + /* Get the pending status of the Wakeup timer Interrupt */ + if (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) != 0U) + { + /* Clear the Wakeup timer interrupt pending bit */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + + /* Wakeup timer callback */ +#if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) + hrtc->WakeUpTimerEventCallback(hrtc); +#else + HAL_RTCEx_WakeUpTimerEventCallback(hrtc); +#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ + } + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; +} + +/** + * @brief Wakeup Timer callback. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval None + */ +__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hrtc); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file + */ +} + +/** + * @brief Handles Wakeup Timer Polling. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) +{ + uint32_t tickstart = 0U; + + /* Get tick */ + tickstart = HAL_GetTick(); + + while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == 0U) + { + if (Timeout != HAL_MAX_DELAY) + { + if ((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) + { + hrtc->State = HAL_RTC_STATE_TIMEOUT; + return HAL_TIMEOUT; + } + } + } + + /* Clear the Wakeup timer Flag */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides functions allowing to + (+) Write a data in a specified RTC Backup data register + (+) Read a data in a specified RTC Backup data register + (+) Set the Smooth calibration parameters. + (+) Configure the Synchronization Shift Control Settings. + (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + (+) Enable the RTC reference clock detection. + (+) Disable the RTC reference clock detection. + (+) Enable the Bypass Shadow feature. + (+) Disable the Bypass Shadow feature. + +@endverbatim + * @{ + */ + +/** + * @brief Writes a data in a specified RTC Backup data register. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param BackupRegister RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx (where x can be from 0 to 1) + * to specify the register. + * @param Data Data to be written in the specified RTC Backup data register. + * @retval None + */ +void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) +{ + uint32_t tmp = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + tmp = (uint32_t) &(hrtc->Instance->BKP0R); + tmp += (BackupRegister * 4U); + + /* Write the specified register */ + *(__IO uint32_t *)tmp = (uint32_t)Data; +} + +/** + * @brief Reads data from the specified RTC Backup data Register. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param BackupRegister RTC Backup data Register number. + * This parameter can be: RTC_BKP_DRx (where x can be from 0 to 1) + * to specify the register. + * @retval Read value + */ +uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) +{ + uint32_t tmp = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_BKP(BackupRegister)); + + tmp = (uint32_t) &(hrtc->Instance->BKP0R); + tmp += (BackupRegister * 4U); + + /* Read the specified register */ + return (*(__IO uint32_t *)tmp); +} + +/** + * @brief Sets the Smooth calibration parameters. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param SmoothCalibPeriod Select the Smooth Calibration Period. + * This parameter can be can be one of the following values: + * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s. + * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s. + * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s. + * @param SmoothCalibPlusPulses Select to Set or reset the CALP bit. + * This parameter can be one of the following values: + * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses. + * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added. + * @param SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits. + * This parameter can be one any value from 0 to 0x000001FF. + * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses + * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field + * SmoothCalibMinusPulsesValue must be equal to 0. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue) +{ + uint32_t tickstart = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod)); + assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses)); + assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* check if a calibration is pending*/ + if ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != 0U) + { + /* Get tick */ + tickstart = HAL_GetTick(); + + /* check if a calibration is pending*/ + while ((hrtc->Instance->ISR & RTC_ISR_RECALPF) != 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + } + + /* Configure the Smooth calibration settings */ + hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | \ + (uint32_t)SmoothCalibPlusPulses | \ + (uint32_t)SmoothCalibMinusPulsesValue); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Configures the Synchronization Shift Control Settings. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param ShiftAdd1S Select to add or not 1 second to the time calendar. + * This parameter can be one of the following values: + * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar. + * @arg RTC_SHIFTADD1S_RESET: No effect. + * @param ShiftSubFS Select the number of Second Fractions to substitute. + * This parameter can be one any value from 0 to 0x7FFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS) +{ + uint32_t tickstart = 0U; + + /* Check the parameters */ + assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S)); + assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait until the shift is completed */ + while ((hrtc->Instance->ISR & RTC_ISR_SHPF) != 0U) + { + if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_TIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_TIMEOUT; + } + } + + /* Configure the Shift settings */ + hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if ((hrtc->Instance->CR & RTC_CR_BYPSHAD) == 0U) + { + if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) + { + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + hrtc->State = HAL_RTC_STATE_ERROR; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_ERROR; + } + } + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @param CalibOutput Select the Calibration output Selection. + * This parameter can be one of the following values: + * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz. + * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput) +{ + /* Check the parameters */ + assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput)); + + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Clear flags before config */ + hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL; + + /* Configure the RTC_CR register */ + hrtc->Instance->CR |= (uint32_t)CalibOutput; + + __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Enables the Bypass Shadow feature. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set the BYPSHAD bit */ + hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @brief Disables the Bypass Shadow feature. + * @param hrtc pointer to a RTC_HandleTypeDef structure that contains + * the configuration information for RTC. + * @note When the Bypass Shadow is enabled the calendar value are taken + * directly from the Calendar counter. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc) +{ + /* Process Locked */ + __HAL_LOCK(hrtc); + + hrtc->State = HAL_RTC_STATE_BUSY; + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Reset the BYPSHAD bit */ + hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); + + /* Change RTC state */ + hrtc->State = HAL_RTC_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hrtc); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_RTC_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smartcard.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smartcard.c new file mode 100644 index 0000000000..4ba6363d21 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smartcard.c @@ -0,0 +1,3172 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_smartcard.c + * @author MCD Application Team + * @brief SMARTCARD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the SMARTCARD peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SMARTCARD HAL driver can be used as follows: + + (#) Declare a SMARTCARD_HandleTypeDef handle structure (eg. SMARTCARD_HandleTypeDef hsmartcard). + (#) Associate a USART to the SMARTCARD handle hsmartcard. + (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API: + (++) Enable the USARTx interface clock. + (++) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input). + (++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT() + and HAL_SMARTCARD_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA() + and HAL_SMARTCARD_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly, + the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission + error enabling or disabling in the hsmartcard handle Init structure. + + (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...) + in the hsmartcard handle AdvancedInit structure. + + (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SMARTCARD_MspInit() API. + [..] + (@) The specific SMARTCARD interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process. + + [..] + [..] Three operation modes are available within this driver : + + *** Polling mode IO operation *** + ================================= + [..] + (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit() + (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive() + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Send an amount of data in non-blocking mode using HAL_SMARTCARD_Transmit_IT() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode using HAL_SMARTCARD_Receive_IT() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() + + *** DMA mode IO operation *** + ============================== + [..] + (+) Send an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA() + (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback() + (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA() + (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback() + (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback() + + *** SMARTCARD HAL driver macros list *** + ======================================== + [..] + Below the list of most used macros in SMARTCARD HAL driver. + + (+) __HAL_SMARTCARD_GET_FLAG : Check whether or not the specified SMARTCARD flag is set + (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag + (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt + (+) __HAL_SMARTCARD_GET_IT_SOURCE: Check whether or not the specified SMARTCARD interrupt is enabled + + [..] + (@) You can refer to the SMARTCARD HAL driver header file for more useful macros + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_SMARTCARD_RegisterCallback() to register a user callback. + Function HAL_SMARTCARD_RegisterCallback() allows to register following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : SMARTCARD MspInit. + (+) MspDeInitCallback : SMARTCARD MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxCpltCallback : Tx Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : SMARTCARD MspInit. + (+) MspDeInitCallback : SMARTCARD MspDeInit. + + [..] + By default, after the HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_SMARTCARD_Init() + and HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_SMARTCARD_Init() and HAL_SMARTCARD_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_SMARTCARD_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_SMARTCARD_RegisterCallback() before calling HAL_SMARTCARD_DeInit() + or HAL_SMARTCARD_Init() function. + + [..] + When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup SMARTCARD SMARTCARD + * @brief HAL SMARTCARD module driver + * @{ + */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants + * @{ + */ +#define SMARTCARD_TEACK_REACK_TIMEOUT 1000U /*!< SMARTCARD TX or RX enable acknowledge time-out value */ + +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \ + USART_CR1_RE | USART_CR1_OVER8| \ + USART_CR1_FIFOEN)) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \ + USART_CR2_CPHA | USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */ + +#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN | USART_CR2_CLK_FIELDS | \ + USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT | USART_CR3_NACK | USART_CR3_SCARCNT | \ + USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */ + +#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */ + +#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SMARTCARD_Private_Functions + * @{ + */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ +static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard); +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, + FlagStatus Status, uint32_t Tickstart, uint32_t Timeout); +static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard); +#if defined(HAL_DMA_MODULE_ENABLED) +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +#endif /* HAL_DMA_MODULE_ENABLED */ +static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard); +static void SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions + * @{ + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and Configuration functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx + associated to the SmartCard. + (+) These parameters can be configured: + (++) Baud Rate + (++) Parity: parity should be enabled, frame Length is fixed to 8 bits plus parity + (++) Receiver/transmitter modes + (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters) + (++) Prescaler value + (++) Guard bit time + (++) NACK enabling or disabling on transmission error + + (+) The following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) Time out enabling (and if activated, timeout value) + (++) Block length + (++) Auto-retry counter + [..] + The HAL_SMARTCARD_Init() API follows the USART synchronous configuration procedures + (details for the procedures are available in reference manual). + +@endverbatim + + The USART frame format is given in the following table: + + Table 1. USART frame format. + +---------------------------------------------------------------+ + | M1M0 bits | PCE bit | USART frame | + |-----------------------|---------------------------------------| + | 01 | 1 | | SB | 8 bit data | PB | STB | | + +---------------------------------------------------------------+ + + + * @{ + */ + +/** + * @brief Initialize the SMARTCARD mode according to the specified + * parameters in the SMARTCARD_HandleTypeDef and initialize the associated handle. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check the SMARTCARD handle allocation */ + if (hsmartcard == NULL) + { + return HAL_ERROR; + } + + /* Check the USART associated to the SMARTCARD handle */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + + if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsmartcard->Lock = HAL_UNLOCKED; + +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 + SMARTCARD_InitCallbacksToDefault(hsmartcard); + + if (hsmartcard->MspInitCallback == NULL) + { + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; + } + + /* Init the low level hardware */ + hsmartcard->MspInitCallback(hsmartcard); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_SMARTCARD_MspInit(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + } + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral to set smartcard mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In SmartCard mode, the following bits must be kept cleared: + - LINEN in the USART_CR2 register, + - HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_LINEN); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN)); + + /* set the USART in SMARTCARD mode */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_SCEN); + + /* Set the SMARTCARD Communication parameters */ + if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Set the SMARTCARD transmission completion indication */ + SMARTCARD_TRANSMISSION_COMPLETION_SETTING(hsmartcard); + + if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT) + { + SMARTCARD_AdvFeatureConfig(hsmartcard); + } + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* TEACK and/or REACK to check before moving hsmartcard->gState and hsmartcard->RxState to Ready */ + return (SMARTCARD_CheckIdleState(hsmartcard)); +} + +/** + * @brief DeInitialize the SMARTCARD peripheral. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check the SMARTCARD handle allocation */ + if (hsmartcard == NULL) + { + return HAL_ERROR; + } + + /* Check the USART/UART associated to the SMARTCARD handle */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Disable the Peripheral */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + WRITE_REG(hsmartcard->Instance->CR1, 0x0U); + WRITE_REG(hsmartcard->Instance->CR2, 0x0U); + WRITE_REG(hsmartcard->Instance->CR3, 0x0U); + WRITE_REG(hsmartcard->Instance->RTOR, 0x0U); + WRITE_REG(hsmartcard->Instance->GTPR, 0x0U); + + /* DeInit the low level hardware */ +#if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1 + if (hsmartcard->MspDeInitCallback == NULL) + { + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; + } + /* DeInit the low level hardware */ + hsmartcard->MspDeInitCallback(hsmartcard); +#else + HAL_SMARTCARD_MspDeInit(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->gState = HAL_SMARTCARD_STATE_RESET; + hsmartcard->RxState = HAL_SMARTCARD_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Initialize the SMARTCARD MSP. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SMARTCARD MSP. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SMARTCARD Callback + * To be used to override the weak predefined callback + * @note The HAL_SMARTCARD_RegisterCallback() may be called before HAL_SMARTCARD_Init() + * in HAL_SMARTCARD_STATE_RESET to register callbacks for HAL_SMARTCARD_MSPINIT_CB_ID + * and HAL_SMARTCARD_MSPDEINIT_CB_ID + * @param hsmartcard smartcard handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID, + pSMARTCARD_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + switch (CallbackID) + { + + case HAL_SMARTCARD_TX_COMPLETE_CB_ID : + hsmartcard->TxCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_RX_COMPLETE_CB_ID : + hsmartcard->RxCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ERROR_CB_ID : + hsmartcard->ErrorCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : + hsmartcard->AbortCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : + hsmartcard->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : + hsmartcard->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID : + hsmartcard->RxFifoFullCallback = pCallback; + break; + + case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID : + hsmartcard->TxFifoEmptyCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET) + { + switch (CallbackID) + { + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = pCallback; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an SMARTCARD callback + * SMARTCARD callback is redirected to the weak predefined callback + * @note The HAL_SMARTCARD_UnRegisterCallback() may be called before HAL_SMARTCARD_Init() + * in HAL_SMARTCARD_STATE_RESET to un-register callbacks for HAL_SMARTCARD_MSPINIT_CB_ID + * and HAL_SMARTCARD_MSPDEINIT_CB_ID + * @param hsmartcard smartcard handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_SMARTCARD_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard, + HAL_SMARTCARD_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_SMARTCARD_STATE_READY == hsmartcard->gState) + { + switch (CallbackID) + { + case HAL_SMARTCARD_TX_COMPLETE_CB_ID : + hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SMARTCARD_RX_COMPLETE_CB_ID : + hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SMARTCARD_ERROR_CB_ID : + hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID : + hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID : + hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback*/ + break; + + case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID : + hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID : + hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID : + hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMARTCARD_STATE_RESET == hsmartcard->gState) + { + switch (CallbackID) + { + case HAL_SMARTCARD_MSPINIT_CB_ID : + hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; + break; + + case HAL_SMARTCARD_MSPDEINIT_CB_ID : + hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; + break; + + default : + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions + * @brief SMARTCARD Transmit and Receive functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SMARTCARD data transfers. + + [..] + Smartcard is a single wire half duplex communication protocol. + The Smartcard interface is designed to support asynchronous protocol Smartcards as + defined in the ISO 7816-3 standard. The USART should be configured as: + (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register + (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register. + + [..] + (#) There are two modes of transfer: + (##) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (##) Non-Blocking mode: The communication is performed using Interrupts + or DMA, the relevant API's return the HAL status. + The end of the data processing will be indicated through the + dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + (##) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks + will be executed respectively at the end of the Transmit or Receive process + The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication + error is detected. + + (#) Blocking mode APIs are : + (##) HAL_SMARTCARD_Transmit() + (##) HAL_SMARTCARD_Receive() + + (#) Non Blocking mode APIs with Interrupt are : + (##) HAL_SMARTCARD_Transmit_IT() + (##) HAL_SMARTCARD_Receive_IT() + (##) HAL_SMARTCARD_IRQHandler() + + (#) Non Blocking mode functions with DMA are : + (##) HAL_SMARTCARD_Transmit_DMA() + (##) HAL_SMARTCARD_Receive_DMA() + + (#) A set of Transfer Complete Callbacks are provided in non Blocking mode: + (##) HAL_SMARTCARD_TxCpltCallback() + (##) HAL_SMARTCARD_RxCpltCallback() + (##) HAL_SMARTCARD_ErrorCallback() + + [..] + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (##) HAL_SMARTCARD_Abort() + (##) HAL_SMARTCARD_AbortTransmit() + (##) HAL_SMARTCARD_AbortReceive() + (##) HAL_SMARTCARD_Abort_IT() + (##) HAL_SMARTCARD_AbortTransmit_IT() + (##) HAL_SMARTCARD_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT), + a set of Abort Complete Callbacks are provided: + (##) HAL_SMARTCARD_AbortCpltCallback() + (##) HAL_SMARTCARD_AbortTransmitCpltCallback() + (##) HAL_SMARTCARD_AbortReceiveCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (##) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, + Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, + Error code is set to allow user to identify error type, + and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side. + If user wants to abort it, Abort services should be called by user. + (##) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Frame Error in Interrupt mode transmission, Overrun Error in Interrupt + mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, + and HAL_SMARTCARD_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + const uint8_t *ptmpdata = pData; + + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((ptmpdata == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + + while (hsmartcard->TxXferCount > 0U) + { + hsmartcard->TxXferCount--; + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + hsmartcard->Instance->TDR = (uint8_t)(*ptmpdata & 0xFFU); + ptmpdata++; + } + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_TRANSMISSION_COMPLETION_FLAG(hsmartcard), RESET, + tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Disable the Peripheral first to update mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* In case of TX only mode, if NACK is enabled, receiver block has been enabled + for Transmit phase. Disable this receiver block. */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) + || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + } + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* At end of Tx process, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, + uint32_t Timeout) +{ + uint32_t tickstart; + uint8_t *ptmpdata = pData; + + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((ptmpdata == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + hsmartcard->RxXferSize = Size; + hsmartcard->RxXferCount = Size; + + /* Check the remain data to be received */ + while (hsmartcard->RxXferCount > 0U) + { + hsmartcard->RxXferCount--; + + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + *ptmpdata = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF); + ptmpdata++; + } + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When FIFO mode is disabled, USART interrupt is generated whenever + * USART_TDR register is empty, i.e one interrupt per data to transmit. + * @note When FIFO mode is enabled, USART interrupt is generated whenever + * TXFIFO threshold reached. In that case the interrupt rate depends on + * TXFIFO threshold configuration. + * @note This function sets the hsmartcard->TxIsr function pointer according to + * the FIFO mode (data transmission processing depends on FIFO mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + hsmartcard->pTxBuffPtr = pData; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + hsmartcard->TxISR = NULL; + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + /* Configure Tx interrupt processing */ + if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer */ + hsmartcard->TxISR = SMARTCARD_TxISR_FIFOEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the TX FIFO threshold interrupt */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer */ + hsmartcard->TxISR = SMARTCARD_TxISR; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the SMARTCARD Transmit Data Register Empty Interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When FIFO mode is disabled, USART interrupt is generated whenever + * USART_RDR register can be read, i.e one interrupt per data to receive. + * @note When FIFO mode is enabled, USART interrupt is generated whenever + * RXFIFO threshold reached. In that case the interrupt rate depends on + * RXFIFO threshold configuration. + * @note This function sets the hsmartcard->RxIsr function pointer according to + * the FIFO mode (data reception processing depends on FIFO mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + hsmartcard->pRxBuffPtr = pData; + hsmartcard->RxXferSize = Size; + hsmartcard->RxXferCount = Size; + + /* Configure Rx interrupt processing */ + if ((hsmartcard->FifoMode == SMARTCARD_FIFOMODE_ENABLE) && (Size >= hsmartcard->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR_FIFOEN; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCART Parity Error interrupt and RX FIFO Threshold interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Parity Error and Data Register not empty Interrupts */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Send an amount of data in DMA mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX; + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->pTxBuffPtr = pData; + hsmartcard->TxXferSize = Size; + hsmartcard->TxXferCount = Size; + + /* Disable the Peripheral first to update mode for TX master */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor + the bidirectional line to detect a NACK signal in case of parity error. + Therefore, the receiver block must be enabled as well (RE bit must be set). */ + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + /* Enable Tx */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE); + + /* Enable the Peripheral */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Perform a TX/RX FIFO Flush */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + + /* Set the SMARTCARD DMA transfer complete callback */ + hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt; + + /* Set the SMARTCARD error callback */ + hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError; + + /* Set the DMA abort callback */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + /* Enable the SMARTCARD transmit DMA channel */ + if (HAL_DMA_Start_IT(hsmartcard->hdmatx, (uint32_t)hsmartcard->pTxBuffPtr, (uint32_t)&hsmartcard->Instance->TDR, + Size) == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + CLEAR_BIT(hsmartcard->Instance->ICR, USART_ICR_TCCF); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the UART Error Interrupt: (Frame error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the SMARTCARD associated USART CR3 register */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Restore hsmartcard->State to ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param pData pointer to data buffer. + * @param Size amount of data to be received. + * @note The SMARTCARD-associated USART parity is enabled (PCE = 1), + * the received data contain the parity bit (MSB position). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX; + + hsmartcard->pRxBuffPtr = pData; + hsmartcard->RxXferSize = Size; + + /* Set the SMARTCARD DMA transfer complete callback */ + hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt; + + /* Set the SMARTCARD DMA error callback */ + hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError; + + /* Set the DMA abort callback */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, (uint32_t)hsmartcard->pRxBuffPtr, + Size) == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Enable the SMARTCARD Parity Error Interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the SMARTCARD associated USART CR3 register */ + SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + /* Restore hsmartcard->State to ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and + ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, + (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx and Rx transfer counters */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t abortcplt = 1U; + + /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and + ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, + (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle, + DMA Abort complete callbacks should be initialised before any call + to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hsmartcard->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if SMARTCARD DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxAbortCallback; + } + else + { + hsmartcard->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hsmartcard->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if SMARTCARD DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxAbortCallback; + } + else + { + hsmartcard->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* SMARTCARD Tx DMA Abort callback has already been initialised : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + hsmartcard->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* SMARTCARD Rx DMA Abort callback has already been initialised : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + hsmartcard->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Clear ISR function pointers */ + hsmartcard->RxISR = NULL; + hsmartcard->TxISR = NULL; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | + SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ + hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + hsmartcard->TxISR = NULL; + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Tx transfer counter */ + hsmartcard->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + hsmartcard->TxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SMARTCARD Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RTOIE, EOBIE, RXNE, PE, RXFT and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | + USART_CR1_EOBIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Check if a Transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ + hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | + SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Rx transfer counter */ + hsmartcard->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | + SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + + return HAL_OK; +} + +/** + * @brief Handle SMARTCARD interrupt requests. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t isrflags = READ_REG(hsmartcard->Instance->ISR); + uint32_t cr1its = READ_REG(hsmartcard->Instance->CR1); + uint32_t cr3its = READ_REG(hsmartcard->Instance->CR3); + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* SMARTCARD in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (hsmartcard->RxISR != NULL) + { + hsmartcard->RxISR(hsmartcard); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U)))) + { + /* SMARTCARD parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE; + } + + /* SMARTCARD frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE; + } + + /* SMARTCARD noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE; + } + + /* SMARTCARD Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U) + || ((cr3its & USART_CR3_EIE) != 0U))) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE; + } + + /* SMARTCARD receiver timeout interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF); + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO; + } + + /* Call SMARTCARD Error Call back function if need be --------------------------*/ + if (hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE) + { + /* SMARTCARD in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (hsmartcard->RxISR != NULL) + { + hsmartcard->RxISR(hsmartcard); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = hsmartcard->ErrorCode; + if ((HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + || ((errorcode & (HAL_SMARTCARD_ERROR_RTO | HAL_SMARTCARD_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the SMARTCARD state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + SMARTCARD_EndRxTransfer(hsmartcard); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* Abort the SMARTCARD DMA Rx channel */ + if (hsmartcard->hdmarx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ + hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */ + hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx); + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + /* other error type to be considered as blocking : + - Frame error in Transmission + */ + else if ((hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + && ((errorcode & HAL_SMARTCARD_ERROR_FE) != 0U)) + { + /* Blocking error : transfer is aborted + Set the SMARTCARD state ready to be able to start again the process, + Disable Tx Interrupts, and disable Tx DMA request, if ongoing */ + SMARTCARD_EndTxTransfer(hsmartcard); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Disable the SMARTCARD DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Abort the SMARTCARD DMA Tx channel */ + if (hsmartcard->hdmatx != NULL) + { + /* Set the SMARTCARD DMA Abort callback : + will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */ + hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMAAbortOnError; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK) + { + /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */ + hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx); + } + } + else + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* SMARTCARD in mode Receiver, end of block interruption ------------------------*/ + if (((isrflags & USART_ISR_EOBF) != 0U) && ((cr1its & USART_CR1_EOBIE) != 0U)) + { + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + __HAL_UNLOCK(hsmartcard); +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information + to be available during HAL_SMARTCARD_RxCpltCallback() processing */ + __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF); + return; + } + + /* SMARTCARD in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (hsmartcard->TxISR != NULL) + { + hsmartcard->TxISR(hsmartcard); + } + return; + } + + /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/ + if (__HAL_SMARTCARD_GET_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) + { + if (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET) + { + SMARTCARD_EndTransmit_IT(hsmartcard); + return; + } + } + + /* SMARTCARD TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + hsmartcard->TxFifoEmptyCallback(hsmartcard); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_SMARTCARDEx_TxFifoEmptyCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + return; + } + + /* SMARTCARD RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + hsmartcard->RxFifoFullCallback(hsmartcard); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_SMARTCARDEx_RxFifoFullCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD error callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD Abort Receive Complete callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARD_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARD_Exported_Functions_Group4 Peripheral State and Errors functions + * @brief SMARTCARD State and Errors functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Errors functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to return the State of SmartCard + handle and also return Peripheral Errors occurred during communication process + (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state + of the SMARTCARD peripheral. + (+) HAL_SMARTCARD_GetError() checks in run-time errors that could occur during + communication. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SMARTCARD handle state. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD handle state + */ +HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(const SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Return SMARTCARD handle state */ + uint32_t temp1; + uint32_t temp2; + temp1 = (uint32_t)hsmartcard->gState; + temp2 = (uint32_t)hsmartcard->RxState; + + return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the SMARTCARD handle error code. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval SMARTCARD handle Error Code + */ +uint32_t HAL_SMARTCARD_GetError(const SMARTCARD_HandleTypeDef *hsmartcard) +{ + return hsmartcard->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions + * @{ + */ + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) +/** + * @brief Initialize the callbacks to their default values. + * @param hsmartcard SMARTCARD handle. + * @retval none + */ +void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Init the SMARTCARD Callback settings */ + hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */ + hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak + RxFifoFullCallback */ + hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak + TxFifoEmptyCallback */ + +} +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */ + +/** + * @brief Configure the SMARTCARD associated USART peripheral. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpreg; + HAL_StatusTypeDef ret = HAL_OK; + static const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; + + /* Check the parameters */ + assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate)); + assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength)); + assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits)); + assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity)); + assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode)); + assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity)); + assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase)); + assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit)); + assert_param(IS_SMARTCARD_ONE_BIT_SAMPLE(hsmartcard->Init.OneBitSampling)); + assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable)); + assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable)); + assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount)); + assert_param(IS_SMARTCARD_CLOCKPRESCALER(hsmartcard->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity). + * Oversampling is forced to 16 (OVER8 = 0). + * Configure the Parity and Mode: + * set PS bit according to hsmartcard->Init.Parity value + * set TE and RE bits according to hsmartcard->Init.Mode value */ + tmpreg = (((uint32_t)hsmartcard->Init.Parity) | ((uint32_t)hsmartcard->Init.Mode) | + ((uint32_t)hsmartcard->Init.WordLength)); + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + tmpreg = hsmartcard->Init.StopBits; + /* Synchronous mode is activated by default */ + tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity; + tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit; + tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable; + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - one-bit sampling method versus three samples' majority rule + * according to hsmartcard->Init.OneBitSampling + * - NACK transmission in case of parity error according + * to hsmartcard->Init.NACKEnable + * - autoretry counter according to hsmartcard->Init.AutoRetryCount */ + + tmpreg = (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable; + tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << USART_CR3_SCARCNT_Pos); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*--------------------- SMARTCARD clock PRESC Configuration ----------------*/ + /* Configure + * - SMARTCARD Clock Prescaler: set PRESCALER according to hsmartcard->Init.ClockPrescaler value */ + MODIFY_REG(hsmartcard->Instance->PRESC, USART_PRESC_PRESCALER, hsmartcard->Init.ClockPrescaler); + + /*-------------------------- USART GTPR Configuration ----------------------*/ + tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << USART_GTPR_GT_Pos)); + MODIFY_REG(hsmartcard->Instance->GTPR, (uint16_t)(USART_GTPR_GT | USART_GTPR_PSC), (uint16_t)tmpreg); + + /*-------------------------- USART RTOR Configuration ----------------------*/ + tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << USART_RTOR_BLEN_Pos); + if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLE) + { + assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); + tmpreg |= (uint32_t) hsmartcard->Init.TimeOutValue; + } + WRITE_REG(hsmartcard->Instance->RTOR, tmpreg); + + /*-------------------------- USART BRR Configuration -----------------------*/ + tmpreg = (uint32_t)(((SMARTCARD_PERIPHCLK / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate); + + /* USARTDIV must be greater than or equal to 0d16 */ + if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX)) + { + hsmartcard->Instance->BRR = (uint16_t)tmpreg; + } + else + { + ret = HAL_ERROR; + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + hsmartcard->NbTxDataToProcess = 1U; + hsmartcard->NbRxDataToProcess = 1U; + + /* Clear ISR function pointers */ + hsmartcard->RxISR = NULL; + hsmartcard->TxISR = NULL; + + return ret; +} + + +/** + * @brief Configure the SMARTCARD associated USART peripheral advanced features. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit)); + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert); + } + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable)); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable); + } + + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError); + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst)); + MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst); + } + +} + +/** + * @brief Check the SMARTCARD Idle State. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tickstart; + + /* Initialize the SMARTCARD ErrorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, tickstart, + SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((hsmartcard->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_REACK, RESET, tickstart, + SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the SMARTCARD states */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Handle SMARTCARD Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param Flag Specifies the SMARTCARD flag to check. + * @param Status The actual Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout Timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, + FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable TXEIE, TCIE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* At end of Tx process, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; +} + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; +} + + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA SMARTCARD transmit process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the SMARTCARD associated USART CR3 register */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); +} + +/** + * @brief DMA SMARTCARD receive process complete callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the SMARTCARD associated USART CR3 register */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD communication error callback. + * @param hdma Pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + /* Stop SMARTCARD DMA Tx request if ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT)) + { + hsmartcard->TxXferCount = 0U; + SMARTCARD_EndTxTransfer(hsmartcard); + } + } + + /* Stop SMARTCARD DMA Rx request if ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR)) + { + hsmartcard->RxXferCount = 0U; + SMARTCARD_EndRxTransfer(hsmartcard); + } + } + + hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA; +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + hsmartcard->RxXferCount = 0U; + hsmartcard->TxXferCount = 0U; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered user error callback */ + hsmartcard->ErrorCallback(hsmartcard); +#else + /* Call legacy weak user error callback */ + HAL_SMARTCARD_ErrorCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hsmartcard->hdmarx != NULL) + { + if (hsmartcard->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (hsmartcard->hdmatx != NULL) + { + if (hsmartcard->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + hsmartcard->TxXferCount = 0U; + hsmartcard->RxXferCount = 0U; + + /* Reset errorCode */ + hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + hsmartcard->AbortCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort complete callback */ + HAL_SMARTCARD_AbortCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + + +/** + * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user by a call to + * HAL_SMARTCARD_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->TxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF); + + /* Restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + hsmartcard->AbortTransmitCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user by a call to + * HAL_SMARTCARD_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent); + + hsmartcard->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, + SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | + SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF); + + /* Restore hsmartcard->RxState to Ready */ + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + hsmartcard->AbortReceiveCpltCallback(hsmartcard); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT() + * and when the FIFO mode is disabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check that a Tx process is ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + if (hsmartcard->TxXferCount == 0U) + { + /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + } + else + { + hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU); + hsmartcard->pTxBuffPtr++; + hsmartcard->TxXferCount--; + } + } +} + +/** + * @brief Send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT() + * and when the FIFO mode is enabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX) + { + for (nb_tx_data = hsmartcard->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (hsmartcard->TxXferCount == 0U) + { + /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + } + else if (READ_BIT(hsmartcard->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU); + hsmartcard->pTxBuffPtr++; + hsmartcard->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Disable the SMARTCARD Transmit Complete Interrupt */ + __HAL_SMARTCARD_DISABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication); + + /* Check if a receive process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the Peripheral first to update mode */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX) + && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* In case of TX only mode, if NACK is enabled, receiver block has been enabled + for Transmit phase. Disable this receiver block. */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE); + } + if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX) + || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE)) + { + /* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */ + __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard); + } + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE); + + /* Tx process is ended, restore hsmartcard->gState to Ready */ + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Clear TxISR function pointer */ + hsmartcard->TxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Tx complete callback */ + hsmartcard->TxCpltCallback(hsmartcard); +#else + /* Call legacy weak Tx complete callback */ + HAL_SMARTCARD_TxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Receive_IT() + * and when the FIFO mode is disabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Check that a Rx process is ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF); + hsmartcard->pRxBuffPtr++; + + hsmartcard->RxXferCount--; + if (hsmartcard->RxXferCount == 0U) + { + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + /* Check if a transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD Parity Error Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief Receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_SMARTCARD_Receive_IT() + * and when the FIFO mode is enabled. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +static void SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint16_t nb_rx_data; + uint16_t rxdatacount; + + /* Check that a Rx process is ongoing */ + if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX) + { + for (nb_rx_data = hsmartcard->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF); + hsmartcard->pRxBuffPtr++; + + hsmartcard->RxXferCount--; + if (hsmartcard->RxXferCount == 0U) + { + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + /* Check if a transmit process is ongoing or not. If not disable ERR IT */ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE); + } + + /* Disable the SMARTCARD Parity Error Interrupt */ + CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE); + + hsmartcard->RxState = HAL_SMARTCARD_STATE_READY; + + /* Clear RxISR function pointer */ + hsmartcard->RxISR = NULL; + +#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1) + /* Call registered Rx complete callback */ + hsmartcard->RxCpltCallback(hsmartcard); +#else + /* Call legacy weak Rx complete callback */ + HAL_SMARTCARD_RxCpltCallback(hsmartcard); +#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */ + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = hsmartcard->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < hsmartcard->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + hsmartcard->RxISR = SMARTCARD_RxISR; + + /* Enable the UART Data Register Not Empty interrupt */ + SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smartcard_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smartcard_ex.c new file mode 100644 index 0000000000..a76924b6a8 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smartcard_ex.c @@ -0,0 +1,494 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_smartcard_ex.c + * @author MCD Application Team + * @brief SMARTCARD HAL module driver. + * This file provides extended firmware functions to manage the following + * functionalities of the SmartCard. + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================= + ##### SMARTCARD peripheral extended features ##### + ============================================================================= + [..] + The Extended SMARTCARD HAL driver can be used as follows: + + (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(), + then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut, + auto-retry counter,...) in the hsmartcard AdvancedInit structure. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When SMARTCARD operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup SMARTCARDEx SMARTCARDEx + * @brief SMARTCARD Extended HAL module driver + * @{ + */ +#ifdef HAL_SMARTCARD_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Private_Constants SMARTCARD Extended Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void SMARTCARDEx_SetNbDataToProcess(SMARTCARD_HandleTypeDef *hsmartcard); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SMARTCARDEx_Exported_Functions SMARTCARD Extended Exported Functions + * @{ + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions + * @brief Extended control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the SMARTCARD. + (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly + (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature + (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature + +@endverbatim + * @{ + */ + +/** @brief Update on the fly the SMARTCARD block length in RTOR register. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param BlockLength SMARTCARD block length (8-bit long at most) + * @retval None + */ +void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength) +{ + MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << USART_RTOR_BLEN_Pos)); +} + +/** @brief Update on the fly the receiver timeout value in RTOR register. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @param TimeOutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue) +{ + assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); + MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue); +} + +/** @brief Enable the SMARTCARD receiver timeout feature. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) +{ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** @brief Disable the SMARTCARD receiver timeout feature. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) +{ + if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group2 Extended Peripheral IO operation functions + * @brief SMARTCARD Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of FIFO mode related callback functions. + + (#) TX/RX Fifos Callbacks: + (++) HAL_SMARTCARDEx_RxFifoFullCallback() + (++) HAL_SMARTCARDEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief SMARTCARD RX Fifo full callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARDEx_RxFifoFullCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARDEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief SMARTCARD TX Fifo empty callback. + * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains + * the configuration information for the specified SMARTCARD module. + * @retval None + */ +__weak void HAL_SMARTCARDEx_TxFifoEmptyCallback(SMARTCARD_HandleTypeDef *hsmartcard) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmartcard); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMARTCARDEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Exported_Functions_Group3 Extended Peripheral FIFO Control functions + * @brief SMARTCARD control functions + * +@verbatim + =============================================================================== + ##### Peripheral FIFO Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SMARTCARD + FIFO feature. + (+) HAL_SMARTCARDEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_SMARTCARDEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_SMARTCARDEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_SMARTCARDEx_SetRxFifoThreshold() API sets the RX FIFO threshold +@endverbatim + * @{ + */ + +/** + * @brief Enable the FIFO mode. + * @param hsmartcard SMARTCARD handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_EnableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + hsmartcard->FifoMode = SMARTCARD_FIFOMODE_ENABLE; + + /* Restore SMARTCARD configuration */ + WRITE_REG(hsmartcard->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param hsmartcard SMARTCARD handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_DisableFifoMode(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Enable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + hsmartcard->FifoMode = SMARTCARD_FIFOMODE_DISABLE; + + /* Restore SMARTCARD configuration */ + WRITE_REG(hsmartcard->Instance->CR1, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param hsmartcard SMARTCARD handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_8 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_4 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_1_2 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_3_4 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_7_8 + * @arg @ref SMARTCARD_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_SetTxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Update TX threshold configuration */ + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + /* Restore SMARTCARD configuration */ + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_UE, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param hsmartcard SMARTCARD handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_8 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_4 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_1_2 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_3_4 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_7_8 + * @arg @ref SMARTCARD_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMARTCARDEx_SetRxFifoThreshold(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(hsmartcard->Instance)); + assert_param(IS_SMARTCARD_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(hsmartcard); + + hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; + + /* Save actual SMARTCARD configuration */ + tmpcr1 = READ_REG(hsmartcard->Instance->CR1); + + /* Disable SMARTCARD */ + __HAL_SMARTCARD_DISABLE(hsmartcard); + + /* Update RX threshold configuration */ + MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + SMARTCARDEx_SetNbDataToProcess(hsmartcard); + + /* Restore SMARTCARD configuration */ + MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_UE, tmpcr1); + + hsmartcard->gState = HAL_SMARTCARD_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmartcard); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup SMARTCARDEx_Private_Functions SMARTCARD Extended Private Functions + * @{ + */ + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the USART configuration registers. + * @param hsmartcard SMARTCARD handle. + * @retval None + */ +static void SMARTCARDEx_SetNbDataToProcess(SMARTCARD_HandleTypeDef *hsmartcard) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + /* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */ + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_DISABLE) + { + hsmartcard->NbTxDataToProcess = 1U; + hsmartcard->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + hsmartcard->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / \ + (uint16_t)denominator[tx_fifo_threshold]; + hsmartcard->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / \ + (uint16_t)denominator[rx_fifo_threshold]; + } +} + +/** + * @} + */ + +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smbus.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smbus.c new file mode 100644 index 0000000000..e1e067cf12 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smbus.c @@ -0,0 +1,2801 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_smbus.c + * @author MCD Application Team + * @brief SMBUS HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the System Management Bus (SMBus) peripheral, + * based on I2C principles of operation : + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral State and Errors functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SMBUS HAL driver can be used as follows: + + (#) Declare a SMBUS_HandleTypeDef handle structure, for example: + SMBUS_HandleTypeDef hsmbus; + + (#)Initialize the SMBUS low level resources by implementing the HAL_SMBUS_MspInit() API: + (##) Enable the SMBUSx interface clock + (##) SMBUS pins configuration + (+++) Enable the clock for the SMBUS GPIOs + (+++) Configure SMBUS pins as alternate function open-drain + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SMBUSx interrupt priority + (+++) Enable the NVIC SMBUS IRQ Channel + + (#) Configure the Communication Clock Timing, Bus Timeout, Own Address1, Master Addressing mode, + Dual Addressing mode, Own Address2, Own Address2 Mask, General call, Nostretch mode, + Peripheral mode and Packet Error Check mode in the hsmbus Init structure. + + (#) Initialize the SMBUS registers by calling the HAL_SMBUS_Init() API: + (++) These API's configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SMBUS_MspInit(&hsmbus) API. + + (#) To check if target device is ready for communication, use the function HAL_SMBUS_IsDeviceReady() + + (#) For SMBUS IO operations, only one mode of operations is available within this driver + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Transmit in master/host SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Master_Transmit_IT() + (++) At transmission end of transfer HAL_SMBUS_MasterTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_MasterTxCpltCallback() + (+) Receive in master/host SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Master_Receive_IT() + (++) At reception end of transfer HAL_SMBUS_MasterRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_MasterRxCpltCallback() + (+) Abort a master/host SMBUS process communication with Interrupt using HAL_SMBUS_Master_Abort_IT() + (++) The associated previous transfer callback is called at the end of abort process + (++) mean HAL_SMBUS_MasterTxCpltCallback() in case of previous state was master transmit + (++) mean HAL_SMBUS_MasterRxCpltCallback() in case of previous state was master receive + (+) Enable/disable the Address listen mode in slave/device or host/slave SMBUS mode + using HAL_SMBUS_EnableListen_IT() HAL_SMBUS_DisableListen_IT() + (++) When address slave/device SMBUS match, HAL_SMBUS_AddrCallback() is executed and users can + add their own code to check the Address Match Code and the transmission direction + request by master/host (Write/Read). + (++) At Listen mode end HAL_SMBUS_ListenCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_ListenCpltCallback() + (+) Transmit in slave/device SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Slave_Transmit_IT() + (++) At transmission end of transfer HAL_SMBUS_SlaveTxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_SlaveTxCpltCallback() + (+) Receive in slave/device SMBUS mode an amount of data in non-blocking mode + using HAL_SMBUS_Slave_Receive_IT() + (++) At reception end of transfer HAL_SMBUS_SlaveRxCpltCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_SlaveRxCpltCallback() + (+) Enable/Disable the SMBUS alert mode using + HAL_SMBUS_EnableAlert_IT() or HAL_SMBUS_DisableAlert_IT() + (++) When SMBUS Alert is generated HAL_SMBUS_ErrorCallback() is executed and users can + add their own code by customization of function pointer HAL_SMBUS_ErrorCallback() + to check the Alert Error Code using function HAL_SMBUS_GetError() + (+) Get HAL state machine or error values using HAL_SMBUS_GetState() or HAL_SMBUS_GetError() + (+) In case of transfer Error, HAL_SMBUS_ErrorCallback() function is executed and users can + add their own code by customization of function pointer HAL_SMBUS_ErrorCallback() + to check the Error Code using function HAL_SMBUS_GetError() + + *** SMBUS HAL driver macros list *** + ================================== + [..] + Below the list of most used macros in SMBUS HAL driver. + + (+) __HAL_SMBUS_ENABLE: Enable the SMBUS peripheral + (+) __HAL_SMBUS_DISABLE: Disable the SMBUS peripheral + (+) __HAL_SMBUS_GET_FLAG: Check whether the specified SMBUS flag is set or not + (+) __HAL_SMBUS_CLEAR_FLAG: Clear the specified SMBUS pending flag + (+) __HAL_SMBUS_ENABLE_IT: Enable the specified SMBUS interrupt + (+) __HAL_SMBUS_DISABLE_IT: Disable the specified SMBUS interrupt + + *** Callback registration *** + ============================================= + [..] + The compilation flag USE_HAL_SMBUS_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_SMBUS_RegisterCallback() or HAL_SMBUS_RegisterAddrCallback() + to register an interrupt callback. + [..] + Function HAL_SMBUS_RegisterCallback() allows to register following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + [..] + For specific callback AddrCallback use dedicated register callbacks : HAL_SMBUS_RegisterAddrCallback. + [..] + Use function HAL_SMBUS_UnRegisterCallback to reset a callback to the default + weak function. + HAL_SMBUS_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) MasterTxCpltCallback : callback for Master transmission end of transfer. + (+) MasterRxCpltCallback : callback for Master reception end of transfer. + (+) SlaveTxCpltCallback : callback for Slave transmission end of transfer. + (+) SlaveRxCpltCallback : callback for Slave reception end of transfer. + (+) ListenCpltCallback : callback for end of listen mode. + (+) ErrorCallback : callback for error detection. + (+) MspInitCallback : callback for Msp Init. + (+) MspDeInitCallback : callback for Msp DeInit. + [..] + For callback AddrCallback use dedicated register callbacks : HAL_SMBUS_UnRegisterAddrCallback. + [..] + By default, after the HAL_SMBUS_Init() and when the state is HAL_I2C_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SMBUS_MasterTxCpltCallback(), HAL_SMBUS_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_SMBUS_Init()/ HAL_SMBUS_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_SMBUS_Init()/ HAL_SMBUS_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + [..] + Callbacks can be registered/unregistered in HAL_I2C_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_I2C_STATE_READY or HAL_I2C_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_SMBUS_RegisterCallback() before calling HAL_SMBUS_DeInit() + or HAL_SMBUS_Init() function. + [..] + When the compilation flag USE_HAL_SMBUS_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + [..] + (@) You can refer to the SMBUS HAL driver header file for more useful macros + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup SMBUS SMBUS + * @brief SMBUS HAL module driver + * @{ + */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SMBUS_Private_Define SMBUS Private Constants + * @{ + */ +#define TIMING_CLEAR_MASK (0xF0FFFFFFUL) /*!< SMBUS TIMING clear register Mask */ +#define HAL_TIMEOUT_ADDR (10000U) /*!< 10 s */ +#define HAL_TIMEOUT_BUSY (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_DIR (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_RXNE (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_STOPF (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TC (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TCR (25U) /*!< 25 ms */ +#define HAL_TIMEOUT_TXIS (25U) /*!< 25 ms */ +#define MAX_NBYTE_SIZE 255U +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions + * @{ + */ +/* Private functions to handle flags during polling transfer */ +static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, + FlagStatus Status, uint32_t Timeout); + +/* Private functions for SMBUS transfer IRQ handler */ +static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags); +static HAL_StatusTypeDef SMBUS_Slave_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags); +static void SMBUS_ITErrorHandler(SMBUS_HandleTypeDef *hsmbus); + +/* Private functions to centralize the enable/disable of Interrupts */ +static void SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest); +static void SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest); + +/* Private function to flush TXDR register */ +static void SMBUS_Flush_TXDR(SMBUS_HandleTypeDef *hsmbus); + +/* Private function to handle start, restart or stop a transfer */ +static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, + uint32_t Mode, uint32_t Request); + +/* Private function to Convert Specific options */ +static void SMBUS_ConvertOtherXferOptions(SMBUS_HandleTypeDef *hsmbus); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SMBUS_Exported_Functions SMBUS Exported Functions + * @{ + */ + +/** @defgroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + deinitialize the SMBUSx peripheral: + + (+) User must Implement HAL_SMBUS_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, IT and NVIC ). + + (+) Call the function HAL_SMBUS_Init() to configure the selected device with + the selected configuration: + (++) Clock Timing + (++) Bus Timeout + (++) Analog Filer mode + (++) Own Address 1 + (++) Addressing mode (Master, Slave) + (++) Dual Addressing mode + (++) Own Address 2 + (++) Own Address 2 Mask + (++) General call mode + (++) Nostretch mode + (++) Packet Error Check mode + (++) Peripheral mode + + + (+) Call the function HAL_SMBUS_DeInit() to restore the default configuration + of the selected SMBUSx peripheral. + + (+) Enable/Disable Analog/Digital filters with HAL_SMBUS_ConfigAnalogFilter() and + HAL_SMBUS_ConfigDigitalFilter(). + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SMBUS according to the specified parameters + * in the SMBUS_InitTypeDef and initialize the associated handle. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the SMBUS handle allocation */ + if (hsmbus == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_ANALOG_FILTER(hsmbus->Init.AnalogFilter)); + assert_param(IS_SMBUS_OWN_ADDRESS1(hsmbus->Init.OwnAddress1)); + assert_param(IS_SMBUS_ADDRESSING_MODE(hsmbus->Init.AddressingMode)); + assert_param(IS_SMBUS_DUAL_ADDRESS(hsmbus->Init.DualAddressMode)); + assert_param(IS_SMBUS_OWN_ADDRESS2(hsmbus->Init.OwnAddress2)); + assert_param(IS_SMBUS_OWN_ADDRESS2_MASK(hsmbus->Init.OwnAddress2Masks)); + assert_param(IS_SMBUS_GENERAL_CALL(hsmbus->Init.GeneralCallMode)); + assert_param(IS_SMBUS_NO_STRETCH(hsmbus->Init.NoStretchMode)); + assert_param(IS_SMBUS_PEC(hsmbus->Init.PacketErrorCheckMode)); + assert_param(IS_SMBUS_PERIPHERAL_MODE(hsmbus->Init.PeripheralMode)); + + if (hsmbus->State == HAL_SMBUS_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hsmbus->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback = HAL_SMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + hsmbus->MasterRxCpltCallback = HAL_SMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + hsmbus->SlaveTxCpltCallback = HAL_SMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + hsmbus->SlaveRxCpltCallback = HAL_SMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + hsmbus->ListenCpltCallback = HAL_SMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + hsmbus->ErrorCallback = HAL_SMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ + hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback */ + + if (hsmbus->MspInitCallback == NULL) + { + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */ + hsmbus->MspInitCallback(hsmbus); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_SMBUS_MspInit(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /*---------------------------- SMBUSx TIMINGR Configuration ------------------------*/ + /* Configure SMBUSx: Frequency range */ + hsmbus->Instance->TIMINGR = hsmbus->Init.Timing & TIMING_CLEAR_MASK; + + /*---------------------------- SMBUSx TIMEOUTR Configuration ------------------------*/ + /* Configure SMBUSx: Bus Timeout */ + hsmbus->Instance->TIMEOUTR &= ~I2C_TIMEOUTR_TIMOUTEN; + hsmbus->Instance->TIMEOUTR &= ~I2C_TIMEOUTR_TEXTEN; + hsmbus->Instance->TIMEOUTR = hsmbus->Init.SMBusTimeout; + + /*---------------------------- SMBUSx OAR1 Configuration -----------------------*/ + /* Configure SMBUSx: Own Address1 and ack own address1 mode */ + hsmbus->Instance->OAR1 &= ~I2C_OAR1_OA1EN; + + if (hsmbus->Init.OwnAddress1 != 0UL) + { + if (hsmbus->Init.AddressingMode == SMBUS_ADDRESSINGMODE_7BIT) + { + hsmbus->Instance->OAR1 = (I2C_OAR1_OA1EN | hsmbus->Init.OwnAddress1); + } + } + + /*---------------------------- SMBUSx CR2 Configuration ------------------------*/ + /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process) */ + /* AUTOEND and NACK bit will be manage during Transfer process */ + hsmbus->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK); + + /*---------------------------- SMBUSx OAR2 Configuration -----------------------*/ + /* Configure SMBUSx: Dual mode and Own Address2 */ + hsmbus->Instance->OAR2 = (hsmbus->Init.DualAddressMode | hsmbus->Init.OwnAddress2 | \ + (hsmbus->Init.OwnAddress2Masks << 8U)); + + /*---------------------------- SMBUSx CR1 Configuration ------------------------*/ + /* Configure SMBUSx: Generalcall and NoStretch mode */ + hsmbus->Instance->CR1 = (hsmbus->Init.GeneralCallMode | hsmbus->Init.NoStretchMode | \ + hsmbus->Init.PacketErrorCheckMode | hsmbus->Init.PeripheralMode | \ + hsmbus->Init.AnalogFilter); + + /* Enable Slave Byte Control only in case of Packet Error Check is enabled + and SMBUS Peripheral is set in Slave mode */ + if ((hsmbus->Init.PacketErrorCheckMode == SMBUS_PEC_ENABLE) && \ + ((hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \ + (hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))) + { + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + } + + /* Enable the selected SMBUS peripheral */ + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitialize the SMBUS peripheral. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DeInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Check the SMBUS handle allocation */ + if (hsmbus == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the SMBUS Peripheral Clock */ + __HAL_SMBUS_DISABLE(hsmbus); + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + if (hsmbus->MspDeInitCallback == NULL) + { + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + hsmbus->MspDeInitCallback(hsmbus); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_SMBUS_MspDeInit(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + hsmbus->PreviousState = HAL_SMBUS_STATE_RESET; + hsmbus->State = HAL_SMBUS_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} + +/** + * @brief Initialize the SMBUS MSP. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitialize the SMBUS MSP. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Configure Analog noise filter. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param AnalogFilter This parameter can be one of the following values: + * @arg @ref SMBUS_ANALOGFILTER_ENABLE + * @arg @ref SMBUS_ANALOGFILTER_DISABLE + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_ANALOG_FILTER(AnalogFilter)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Reset ANOFF bit */ + hsmbus->Instance->CR1 &= ~(I2C_CR1_ANFOFF); + + /* Set analog filter bit*/ + hsmbus->Instance->CR1 |= AnalogFilter; + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Configure Digital noise filter. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter) +{ + uint32_t tmpreg; + + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_DIGITAL_FILTER(DigitalFilter)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + /* Get the old register value */ + tmpreg = hsmbus->Instance->CR1; + + /* Reset I2C DNF bits [11:8] */ + tmpreg &= ~(I2C_CR1_DNF); + + /* Set I2Cx DNF coefficient */ + tmpreg |= DigitalFilter << I2C_CR1_DNF_Pos; + + /* Store the new register value */ + hsmbus->Instance->CR1 = tmpreg; + + __HAL_SMBUS_ENABLE(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User SMBUS Callback + * To be used instead of the weak predefined callback + * @note The HAL_SMBUS_RegisterCallback() may be called before HAL_SMBUS_Init() in + * HAL_SMBUS_STATE_RESET to register callbacks for HAL_SMBUS_MSPINIT_CB_ID and + * HAL_SMBUS_MSPDEINIT_CB_ID. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_SMBUS_ERROR_CB_ID Error callback ID + * @arg @ref HAL_SMBUS_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID, + pSMBUS_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID : + hsmbus->MasterTxCpltCallback = pCallback; + break; + + case HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID : + hsmbus->MasterRxCpltCallback = pCallback; + break; + + case HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID : + hsmbus->SlaveTxCpltCallback = pCallback; + break; + + case HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID : + hsmbus->SlaveRxCpltCallback = pCallback; + break; + + case HAL_SMBUS_LISTEN_COMPLETE_CB_ID : + hsmbus->ListenCpltCallback = pCallback; + break; + + case HAL_SMBUS_ERROR_CB_ID : + hsmbus->ErrorCallback = pCallback; + break; + + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = pCallback; + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMBUS_STATE_RESET == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = pCallback; + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an SMBUS Callback + * SMBUS callback is redirected to the weak predefined callback + * @note The HAL_SMBUS_UnRegisterCallback() may be called before HAL_SMBUS_Init() in + * HAL_SMBUS_STATE_RESET to un-register callbacks for HAL_SMBUS_MSPINIT_CB_ID and + * HAL_SMBUS_MSPDEINIT_CB_ID + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * This parameter can be one of the following values: + * @arg @ref HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID + * @arg @ref HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID + * @arg @ref HAL_SMBUS_LISTEN_COMPLETE_CB_ID Listen Complete callback ID + * @arg @ref HAL_SMBUS_ERROR_CB_ID Error callback ID + * @arg @ref HAL_SMBUS_MSPINIT_CB_ID MspInit callback ID + * @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, + HAL_SMBUS_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MASTER_TX_COMPLETE_CB_ID : + hsmbus->MasterTxCpltCallback = HAL_SMBUS_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */ + break; + + case HAL_SMBUS_MASTER_RX_COMPLETE_CB_ID : + hsmbus->MasterRxCpltCallback = HAL_SMBUS_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */ + break; + + case HAL_SMBUS_SLAVE_TX_COMPLETE_CB_ID : + hsmbus->SlaveTxCpltCallback = HAL_SMBUS_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */ + break; + + case HAL_SMBUS_SLAVE_RX_COMPLETE_CB_ID : + hsmbus->SlaveRxCpltCallback = HAL_SMBUS_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */ + break; + + case HAL_SMBUS_LISTEN_COMPLETE_CB_ID : + hsmbus->ListenCpltCallback = HAL_SMBUS_ListenCpltCallback; /* Legacy weak ListenCpltCallback */ + break; + + case HAL_SMBUS_ERROR_CB_ID : + hsmbus->ErrorCallback = HAL_SMBUS_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SMBUS_STATE_RESET == hsmbus->State) + { + switch (CallbackID) + { + case HAL_SMBUS_MSPINIT_CB_ID : + hsmbus->MspInitCallback = HAL_SMBUS_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SMBUS_MSPDEINIT_CB_ID : + hsmbus->MspDeInitCallback = HAL_SMBUS_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register the Slave Address Match SMBUS Callback + * To be used instead of the weak HAL_SMBUS_AddrCallback() predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pCallback pointer to the Address Match Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, + pSMBUS_AddrCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + hsmbus->AddrCallback = pCallback; + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the Slave Address Match SMBUS Callback + * Info Ready SMBUS Callback is redirected to the weak HAL_SMBUS_AddrCallback() predefined callback + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_SMBUS_STATE_READY == hsmbus->State) + { + hsmbus->AddrCallback = HAL_SMBUS_AddrCallback; /* Legacy weak AddrCallback */ + } + else + { + /* Update the error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup SMBUS_Exported_Functions_Group2 Input and Output operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SMBUS data + transfers. + + (#) Blocking mode function to check if device is ready for usage is : + (++) HAL_SMBUS_IsDeviceReady() + + (#) There is only one mode of transfer: + (++) Non-Blocking mode : The communication is performed using Interrupts. + These functions return the status of the transfer startup. + The end of the data processing will be indicated through the + dedicated SMBUS IRQ when using Interrupt mode. + + (#) Non-Blocking mode functions with Interrupt are : + (++) HAL_SMBUS_Master_Transmit_IT() + (++) HAL_SMBUS_Master_Receive_IT() + (++) HAL_SMBUS_Slave_Transmit_IT() + (++) HAL_SMBUS_Slave_Receive_IT() + (++) HAL_SMBUS_EnableListen_IT() or alias HAL_SMBUS_EnableListen_IT() + (++) HAL_SMBUS_DisableListen_IT() + (++) HAL_SMBUS_EnableAlert_IT() + (++) HAL_SMBUS_DisableAlert_IT() + + (#) A set of Transfer Complete Callbacks are provided in non-Blocking mode: + (++) HAL_SMBUS_MasterTxCpltCallback() + (++) HAL_SMBUS_MasterRxCpltCallback() + (++) HAL_SMBUS_SlaveTxCpltCallback() + (++) HAL_SMBUS_SlaveRxCpltCallback() + (++) HAL_SMBUS_AddrCallback() + (++) HAL_SMBUS_ListenCpltCallback() + (++) HAL_SMBUS_ErrorCallback() + +@endverbatim + * @{ + */ + +/** + * @brief Transmit in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, + uint8_t *pData, uint16_t Size, uint32_t XferOptions) +{ + uint32_t tmp; + uint32_t sizetoxfer; + + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_TX; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* In case of Quick command, remove autoend mode */ + /* Manage the stop generation by software */ + if (hsmbus->pBuffPtr == NULL) + { + hsmbus->XferOptions &= ~SMBUS_AUTOEND_MODE; + } + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + sizetoxfer = hsmbus->XferSize; + if ((sizetoxfer > 0U) && ((XferOptions == SMBUS_FIRST_FRAME) || + (XferOptions == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || + (XferOptions == SMBUS_FIRST_FRAME_WITH_PEC) || + (XferOptions == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC))) + { + if (hsmbus->pBuffPtr != NULL) + { + /* Preload TX register */ + /* Write data to TXDR */ + hsmbus->Instance->TXDR = *hsmbus->pBuffPtr; + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + hsmbus->XferCount--; + hsmbus->XferSize--; + } + else + { + return HAL_ERROR; + } + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((sizetoxfer < hsmbus->XferCount) && (sizetoxfer == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)sizetoxfer, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_GENERATE_START_WRITE); + } + else + { + /* If transfer direction not change, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + + /* Store current volatile XferOptions, misra rule */ + tmp = hsmbus->XferOptions; + + if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX) && \ + (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)sizetoxfer, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + } + /* Else transfer direction change, so generate Restart with new transfer direction */ + else + { + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Handle Transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)sizetoxfer, + hsmbus->XferOptions, + SMBUS_GENERATE_START_WRITE); + } + + /* If PEC mode is enable, size to transmit manage by SW part should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + if (hsmbus->XferSize > 0U) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + else + { + return HAL_ERROR; + } + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in master/host SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, + uint16_t Size, uint32_t XferOptions) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_RX; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* In case of Quick command, remove autoend mode */ + /* Manage the stop generation by software */ + if (hsmbus->pBuffPtr == NULL) + { + hsmbus->XferOptions &= ~SMBUS_AUTOEND_MODE; + } + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Send Slave Address */ + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_GENERATE_START_READ); + } + else + { + /* If transfer direction not change, do not generate Restart Condition */ + /* Mean Previous state is same as current state */ + + /* Store current volatile XferOptions, Misra rule */ + tmp = hsmbus->XferOptions; + + if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX) && \ + (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0)) + { + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + } + /* Else transfer direction change, so generate Restart with new transfer direction */ + else + { + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Handle Transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, + hsmbus->XferOptions, + SMBUS_GENERATE_START_READ); + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Abort a master/host SMBUS process communication with Interrupt. + * @note This abort can be called only if state is ready + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress) +{ + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(hsmbus); + + /* Keep the same state as previous */ + /* to perform as well the call of the corresponding end of transfer callback */ + if (hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_TX; + } + else if (hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + hsmbus->State = HAL_SMBUS_STATE_MASTER_BUSY_RX; + } + else + { + /* Wrong usage of abort function */ + /* This function should be used only in case of abort monitored by master device */ + return HAL_ERROR; + } + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set NBYTES to 1 to generate a dummy read on SMBUS peripheral */ + /* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */ + SMBUS_TransferConfig(hsmbus, DevAddress, 1, SMBUS_AUTOEND_MODE, SMBUS_NO_STARTSTOP); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX); + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX); + } + else + { + /* Nothing to do */ + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Transmit in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0UL)) + { + hsmbus->ErrorCode = HAL_SMBUS_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR | SMBUS_IT_TX); + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = (HAL_SMBUS_STATE_SLAVE_BUSY_TX | HAL_SMBUS_STATE_LISTEN); + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set SBC bit to manage Acknowledge at each bit */ + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + + /* Enable Address Acknowledge */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + if (Size > MAX_NBYTE_SIZE) + { + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = Size; + } + + /* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */ + if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE)) + { + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_NO_STARTSTOP); + } + else + { + /* Set NBYTE to transmit */ + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the HOST */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_TX | SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive in slave/device SMBUS mode an amount of data in non-blocking mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param pData Pointer to data buffer + * @param Size Amount of data to be sent + * @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, + uint32_t XferOptions) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions)); + + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + if ((pData == NULL) || (Size == 0UL)) + { + hsmbus->ErrorCode = HAL_SMBUS_ERROR_INVALID_PARAM; + return HAL_ERROR; + } + + /* Disable Interrupts, to prevent preemption during treatment in case of multicall */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR | SMBUS_IT_RX); + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = (HAL_SMBUS_STATE_SLAVE_BUSY_RX | HAL_SMBUS_STATE_LISTEN); + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + /* Set SBC bit to manage Acknowledge at each bit */ + hsmbus->Instance->CR1 |= I2C_CR1_SBC; + + /* Enable Address Acknowledge */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + + /* Prepare transfer parameters */ + hsmbus->pBuffPtr = pData; + hsmbus->XferSize = Size; + hsmbus->XferCount = Size; + hsmbus->XferOptions = XferOptions; + + /* Convert OTHER_xxx XferOptions if any */ + SMBUS_ConvertOtherXferOptions(hsmbus); + + /* Set NBYTE to receive */ + /* If XferSize equal "1", or XferSize equal "2" with PEC requested (mean 1 data byte + 1 PEC byte */ + /* no need to set RELOAD bit mode, a ACK will be automatically generated in that case */ + /* else need to set RELOAD bit mode to generate an automatic ACK at each byte Received */ + /* This RELOAD bit will be reset for last BYTE to be receive in SMBUS_Slave_ISR */ + if (((SMBUS_GET_PEC_MODE(hsmbus) != 0UL) && (hsmbus->XferSize == 2U)) || (hsmbus->XferSize == 1U)) + { + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + } + else + { + SMBUS_TransferConfig(hsmbus, 0, 1, hsmbus->XferOptions | SMBUS_RELOAD_MODE, SMBUS_NO_STARTSTOP); + } + + /* Clear ADDR flag after prepare the transfer parameters */ + /* This action will generate an acknowledge to the HOST */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Note : The SMBUS interrupts must be enabled after unlocking current process + to avoid the risk of SMBUS interrupt handle execution before current + process unlock */ + /* REnable ADDR interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the Address listen mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus) +{ + hsmbus->State = HAL_SMBUS_STATE_LISTEN; + + /* Enable the Address Match interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_ADDR); + + return HAL_OK; +} + +/** + * @brief Disable the Address listen mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Disable Address listen mode only if a transfer is not ongoing */ + if (hsmbus->State == HAL_SMBUS_STATE_LISTEN) + { + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Disable the Address Match interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Enable the SMBUS alert mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Enable SMBus alert */ + hsmbus->Instance->CR1 |= I2C_CR1_ALERTEN; + + /* Clear ALERT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ALERT); + + /* Enable Alert Interrupt */ + SMBUS_Enable_IRQ(hsmbus, SMBUS_IT_ALERT); + + return HAL_OK; +} +/** + * @brief Disable the SMBUS alert mode with Interrupt. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUSx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus) +{ + /* Enable SMBus alert */ + hsmbus->Instance->CR1 &= ~I2C_CR1_ALERTEN; + + /* Disable Alert Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ALERT); + + return HAL_OK; +} + +/** + * @brief Check if target device is ready for communication. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param DevAddress Target device address: The device 7 bits address value + * in datasheet must be shifted to the left before calling the interface + * @param Trials Number of trials + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, + uint32_t Timeout) +{ + uint32_t tickstart; + + __IO uint32_t SMBUS_Trials = 0UL; + + FlagStatus tmp1; + FlagStatus tmp2; + + if (hsmbus->State == HAL_SMBUS_STATE_READY) + { + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_BUSY) != RESET) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + hsmbus->State = HAL_SMBUS_STATE_BUSY; + hsmbus->ErrorCode = HAL_SMBUS_ERROR_NONE; + + do + { + /* Generate Start */ + hsmbus->Instance->CR2 = SMBUS_GENERATE_START(hsmbus->Init.AddressingMode, DevAddress); + + /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */ + /* Wait until STOPF flag is set or a NACK flag is set*/ + tickstart = HAL_GetTick(); + + tmp1 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF); + tmp2 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF); + + while ((tmp1 == RESET) && (tmp2 == RESET)) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + /* Device is ready */ + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + return HAL_ERROR; + } + } + + tmp1 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_STOPF); + tmp2 = __HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF); + } + + /* Check if the NACKF flag has not been set */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_AF) == RESET) + { + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Device is ready */ + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; + } + else + { + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Clear STOP Flag, auto generated with autoend*/ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + } + + /* Check if the maximum allowed number of trials has been reached */ + if (SMBUS_Trials == Trials) + { + /* Generate Stop */ + hsmbus->Instance->CR2 |= I2C_CR2_STOP; + + /* Wait until STOPF flag is reset */ + if (SMBUS_WaitOnFlagUntilTimeout(hsmbus, SMBUS_FLAG_STOPF, RESET, Timeout) != HAL_OK) + { + return HAL_ERROR; + } + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + } + + /* Increment Trials */ + SMBUS_Trials++; + } while (SMBUS_Trials < Trials); + + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_ERROR; + } + else + { + return HAL_BUSY; + } +} +/** + * @} + */ + +/** @defgroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks + * @{ + */ + +/** + * @brief Handle SMBUS event interrupt request. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus) +{ + /* Use a local variable to store the current ISR flags */ + /* This action will avoid a wrong treatment due to ISR flags change during interrupt handler */ + uint32_t tmpisrvalue = READ_REG(hsmbus->Instance->ISR); + uint32_t tmpcr1value = READ_REG(hsmbus->Instance->CR1); + + /* SMBUS in mode Transmitter ---------------------------------------------------*/ + if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI | + SMBUS_IT_NACKI | SMBUS_IT_TXI)) != RESET) && + ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TXIS) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + /* Slave mode selected */ + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + /* Master mode selected */ + else if ((hsmbus->State & HAL_SMBUS_STATE_MASTER_BUSY_TX) == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + (void)SMBUS_Master_ISR(hsmbus, tmpisrvalue); + } + else + { + /* Nothing to do */ + } + } + + /* SMBUS in mode Receiver ----------------------------------------------------*/ + if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI | + SMBUS_IT_NACKI | SMBUS_IT_RXI)) != RESET) && + ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_RXNE) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + /* Slave mode selected */ + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + /* Master mode selected */ + else if ((hsmbus->State & HAL_SMBUS_STATE_MASTER_BUSY_RX) == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + (void)SMBUS_Master_ISR(hsmbus, tmpisrvalue); + } + else + { + /* Nothing to do */ + } + } + + /* SMBUS in mode Listener Only --------------------------------------------------*/ + if (((SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_ADDRI) != RESET) || + (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_STOPI) != RESET) || + (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_NACKI) != RESET)) && + ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_ADDR) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || + (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET))) + { + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + (void)SMBUS_Slave_ISR(hsmbus, tmpisrvalue); + } + } +} + +/** + * @brief Handle SMBUS error interrupt request. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus) +{ + SMBUS_ITErrorHandler(hsmbus); +} + +/** + * @brief Master Tx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MasterTxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Master Rx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_MasterRxCpltCallback() could be implemented in the user file + */ +} + +/** @brief Slave Tx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_SlaveTxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Slave Rx Transfer completed callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_SlaveRxCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief Slave Address Match callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param TransferDirection Master request Transfer Direction (Write/Read) + * @param AddrMatchCode Address Match Code + * @retval None + */ +__weak void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, + uint16_t AddrMatchCode) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + UNUSED(TransferDirection); + UNUSED(AddrMatchCode); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_AddrCallback() could be implemented in the user file + */ +} + +/** + * @brief Listen Complete callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_ListenCpltCallback() could be implemented in the user file + */ +} + +/** + * @brief SMBUS error callback. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval None + */ +__weak void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hsmbus); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SMBUS_ErrorCallback() could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief Peripheral State and Errors functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the SMBUS handle state. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval HAL state + */ +uint32_t HAL_SMBUS_GetState(const SMBUS_HandleTypeDef *hsmbus) +{ + /* Return SMBUS handle state */ + return hsmbus->State; +} + +/** + * @brief Return the SMBUS error code. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @retval SMBUS Error Code + */ +uint32_t HAL_SMBUS_GetError(const SMBUS_HandleTypeDef *hsmbus) +{ + return hsmbus->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions + * @brief Data transfers Private functions + * @{ + */ + +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param StatusFlags Value of Interrupt Flags. + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_Master_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags) +{ + uint16_t DevAddress; + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_AF) != RESET) + { + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Set corresponding Error Code */ + /* No need to generate STOP, it is automatically done */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ACKF; + + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_STOPF) != RESET) + { + /* Check and treat errors if errors occurs during STOP process */ + SMBUS_ITErrorHandler(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + /* Flush remaining data in Fifo register in case of error occurs before TXEmpty */ + /* Disable the selected SMBUS peripheral */ + __HAL_SMBUS_DISABLE(hsmbus); + + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Re-enable the selected SMBUS peripheral */ + __HAL_SMBUS_ENABLE(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + /* Store Last receive data if any */ + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + if ((hsmbus->XferSize > 0U)) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + /* Increment Size counter */ + hsmbus->XferSize--; + hsmbus->XferCount--; + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TXIS) != RESET) + { + /* Write data to TXDR */ + hsmbus->Instance->TXDR = *hsmbus->pBuffPtr; + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + /* Increment Size counter */ + hsmbus->XferSize--; + hsmbus->XferCount--; + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TCR) != RESET) + { + if ((hsmbus->XferCount != 0U) && (hsmbus->XferSize == 0U)) + { + DevAddress = (uint16_t)(hsmbus->Instance->CR2 & I2C_CR2_SADD); + + if (hsmbus->XferCount > MAX_NBYTE_SIZE) + { + SMBUS_TransferConfig(hsmbus, DevAddress, MAX_NBYTE_SIZE, + (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), + SMBUS_NO_STARTSTOP); + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = hsmbus->XferCount; + SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + } + else if ((hsmbus->XferCount == 0U) && (hsmbus->XferSize == 0U)) + { + /* Call TxCpltCallback() if no stop mode is set */ + if (SMBUS_GET_STOP_MODE(hsmbus) != SMBUS_AUTOEND_MODE) + { + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TC) != RESET) + { + if (hsmbus->XferCount == 0U) + { + /* Specific use case for Quick command */ + if (hsmbus->pBuffPtr == NULL) + { + /* Generate a Stop command */ + hsmbus->Instance->CR2 |= I2C_CR2_STOP; + } + /* Call TxCpltCallback() if no stop mode is set */ + else if (SMBUS_GET_STOP_MODE(hsmbus) != SMBUS_AUTOEND_MODE) + { + /* No Generate Stop, to permit restart mode */ + /* The stop will be done at the end of transfer, when SMBUS_AUTOEND_MODE enable */ + + /* Call the corresponding callback to inform upper layer of End of Transfer */ + if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_TX) + { + /* Disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterTxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if (hsmbus->State == HAL_SMBUS_STATE_MASTER_BUSY_RX) + { + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->MasterRxCpltCallback(hsmbus); +#else + HAL_SMBUS_MasterRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else + { + /* Nothing to do */ + } + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} +/** + * @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param StatusFlags Value of Interrupt Flags. + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_Slave_ISR(SMBUS_HandleTypeDef *hsmbus, uint32_t StatusFlags) +{ + uint8_t TransferDirection; + uint16_t SlaveAddrCode; + + /* Process Locked */ + __HAL_LOCK(hsmbus); + + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_AF) != RESET) + { + /* Check that SMBUS transfer finished */ + /* if yes, normal usecase, a NACK is sent by the HOST when Transfer is finished */ + /* Mean XferCount == 0*/ + /* So clear Flag NACKF only */ + if (hsmbus->XferCount == 0U) + { + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + } + else + { + /* if no, error usecase, a Non-Acknowledge of last Data is generated by the HOST*/ + /* Clear NACK Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_AF); + + /* Set HAL State to "Idle" State, mean to LISTEN state */ + /* So reset Slave Busy state */ + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_TX); + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_RX); + + /* Disable RX/TX Interrupts, keep only ADDR Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_TX); + + /* Set ErrorCode corresponding to a Non-Acknowledge */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ACKF; + + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_ADDR) != RESET) + { + TransferDirection = (uint8_t)(SMBUS_GET_DIR(hsmbus)); + SlaveAddrCode = (uint16_t)(SMBUS_GET_ADDR_MATCH(hsmbus)); + + /* Disable ADDR interrupt to prevent multiple ADDRInterrupt*/ + /* Other ADDRInterrupt will be treat in next Listen usecase */ + __HAL_SMBUS_DISABLE_IT(hsmbus, SMBUS_IT_ADDRI); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call Slave Addr callback */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->AddrCallback(hsmbus, TransferDirection, SlaveAddrCode); +#else + HAL_SMBUS_AddrCallback(hsmbus, TransferDirection, SlaveAddrCode); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else if ((SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) || + (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TCR) != RESET)) + { + if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + hsmbus->XferSize--; + hsmbus->XferCount--; + + if (hsmbus->XferCount == 1U) + { + /* Receive last Byte, can be PEC byte in case of PEC BYTE enabled */ + /* or only the last Byte of Transfer */ + /* So reset the RELOAD bit mode */ + hsmbus->XferOptions &= ~SMBUS_RELOAD_MODE; + SMBUS_TransferConfig(hsmbus, 0, 1, hsmbus->XferOptions, SMBUS_NO_STARTSTOP); + } + else if (hsmbus->XferCount == 0U) + { + /* Last Byte is received, disable Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX); + + /* Remove HAL_SMBUS_STATE_SLAVE_BUSY_RX, keep only HAL_SMBUS_STATE_LISTEN */ + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_RX); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->SlaveRxCpltCallback(hsmbus); +#else + HAL_SMBUS_SlaveRxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + else + { + /* Set Reload for next Bytes */ + SMBUS_TransferConfig(hsmbus, 0, 1, + SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), + SMBUS_NO_STARTSTOP); + + /* Ack last Byte Read */ + hsmbus->Instance->CR2 &= ~I2C_CR2_NACK; + } + } + else if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + { + if ((hsmbus->XferCount != 0U) && (hsmbus->XferSize == 0U)) + { + if (hsmbus->XferCount > MAX_NBYTE_SIZE) + { + SMBUS_TransferConfig(hsmbus, 0, MAX_NBYTE_SIZE, + (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), + SMBUS_NO_STARTSTOP); + hsmbus->XferSize = MAX_NBYTE_SIZE; + } + else + { + hsmbus->XferSize = hsmbus->XferCount; + SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, + SMBUS_NO_STARTSTOP); + /* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */ + /* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */ + if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + } + } + else + { + /* Nothing to do */ + } + } + else if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TXIS) != RESET) + { + /* Write data to TXDR only if XferCount not reach "0" */ + /* A TXIS flag can be set, during STOP treatment */ + /* Check if all Data have already been sent */ + /* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */ + if (hsmbus->XferCount > 0U) + { + /* Write data to TXDR */ + hsmbus->Instance->TXDR = *hsmbus->pBuffPtr; + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + hsmbus->XferCount--; + hsmbus->XferSize--; + } + + if (hsmbus->XferCount == 0U) + { + /* Last Byte is Transmitted */ + /* Remove HAL_SMBUS_STATE_SLAVE_BUSY_TX, keep only HAL_SMBUS_STATE_LISTEN */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_TX); + hsmbus->PreviousState = hsmbus->State; + hsmbus->State &= ~((uint32_t)HAL_SMBUS_STATE_SLAVE_BUSY_TX); + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the corresponding callback to inform upper layer of End of Transfer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->SlaveTxCpltCallback(hsmbus); +#else + HAL_SMBUS_SlaveTxCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + else + { + /* Nothing to do */ + } + + /* Check if STOPF is set */ + if (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_STOPF) != RESET) + { + if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN) + { + /* Store Last receive data if any */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_RXNE) != RESET) + { + /* Read data from RXDR */ + *hsmbus->pBuffPtr = (uint8_t)(hsmbus->Instance->RXDR); + + /* Increment Buffer pointer */ + hsmbus->pBuffPtr++; + + if ((hsmbus->XferSize > 0U)) + { + hsmbus->XferSize--; + hsmbus->XferCount--; + } + } + + /* Disable RX and TX Interrupts */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_RX | SMBUS_IT_TX); + + /* Disable ADDR Interrupt */ + SMBUS_Disable_IRQ(hsmbus, SMBUS_IT_ADDR); + + /* Disable Address Acknowledge */ + hsmbus->Instance->CR2 |= I2C_CR2_NACK; + + /* Clear Configuration Register 2 */ + SMBUS_RESET_CR2(hsmbus); + + /* Clear STOP Flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_STOPF); + + /* Clear ADDR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ADDR); + + hsmbus->XferOptions = 0; + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + /* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ListenCpltCallback(hsmbus); +#else + HAL_SMBUS_ListenCpltCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } + } + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_OK; +} +/** + * @brief Manage the enabling of Interrupts. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param InterruptRequest Value of @ref SMBUS_Interrupt_configuration_definition. + * @retval HAL status + */ +static void SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest) +{ + uint32_t tmpisr = 0UL; + + if ((InterruptRequest & SMBUS_IT_ALERT) == SMBUS_IT_ALERT) + { + /* Enable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_ADDR) == SMBUS_IT_ADDR) + { + /* Enable ADDR, STOP interrupt */ + tmpisr |= SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_TX) == SMBUS_IT_TX) + { + /* Enable ERR, TC, STOP, NACK, RXI interrupt */ + tmpisr |= SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI; + } + + if ((InterruptRequest & SMBUS_IT_RX) == SMBUS_IT_RX) + { + /* Enable ERR, TC, STOP, NACK, TXI interrupt */ + tmpisr |= SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_RXI; + } + + /* Enable interrupts only at the end */ + /* to avoid the risk of SMBUS interrupt handle execution before */ + /* all interrupts requested done */ + __HAL_SMBUS_ENABLE_IT(hsmbus, tmpisr); +} +/** + * @brief Manage the disabling of Interrupts. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param InterruptRequest Value of @ref SMBUS_Interrupt_configuration_definition. + * @retval HAL status + */ +static void SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest) +{ + uint32_t tmpisr = 0UL; + uint32_t tmpstate = hsmbus->State; + + if ((tmpstate == HAL_SMBUS_STATE_READY) && ((InterruptRequest & SMBUS_IT_ALERT) == SMBUS_IT_ALERT)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((InterruptRequest & SMBUS_IT_TX) == SMBUS_IT_TX) + { + /* Disable TC, STOP, NACK and TXI interrupt */ + tmpisr |= SMBUS_IT_TCI | SMBUS_IT_TXI; + + if ((SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + && ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN) + { + /* Disable STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_STOPI | SMBUS_IT_NACKI; + } + } + + if ((InterruptRequest & SMBUS_IT_RX) == SMBUS_IT_RX) + { + /* Disable TC, STOP, NACK and RXI interrupt */ + tmpisr |= SMBUS_IT_TCI | SMBUS_IT_RXI; + + if ((SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + && ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN)) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + + if ((tmpstate & HAL_SMBUS_STATE_LISTEN) != HAL_SMBUS_STATE_LISTEN) + { + /* Disable STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_STOPI | SMBUS_IT_NACKI; + } + } + + if ((InterruptRequest & SMBUS_IT_ADDR) == SMBUS_IT_ADDR) + { + /* Disable ADDR, STOP and NACK interrupt */ + tmpisr |= SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI; + + if (SMBUS_GET_ALERT_ENABLED(hsmbus) == 0UL) + { + /* Disable ERR interrupt */ + tmpisr |= SMBUS_IT_ERRI; + } + } + + /* Disable interrupts only at the end */ + /* to avoid a breaking situation like at "t" time */ + /* all disable interrupts request are not done */ + __HAL_SMBUS_DISABLE_IT(hsmbus, tmpisr); +} + +/** + * @brief SMBUS interrupts error handler. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_ITErrorHandler(SMBUS_HandleTypeDef *hsmbus) +{ + uint32_t itflags = READ_REG(hsmbus->Instance->ISR); + uint32_t itsources = READ_REG(hsmbus->Instance->CR1); + uint32_t tmpstate; + uint32_t tmperror; + + /* SMBUS Bus error interrupt occurred ------------------------------------*/ + if (((itflags & SMBUS_FLAG_BERR) == SMBUS_FLAG_BERR) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BERR; + + /* Clear BERR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_BERR); + } + + /* SMBUS Over-Run/Under-Run interrupt occurred ----------------------------------------*/ + if (((itflags & SMBUS_FLAG_OVR) == SMBUS_FLAG_OVR) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_OVR; + + /* Clear OVR flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_OVR); + } + + /* SMBUS Arbitration Loss error interrupt occurred ------------------------------------*/ + if (((itflags & SMBUS_FLAG_ARLO) == SMBUS_FLAG_ARLO) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ARLO; + + /* Clear ARLO flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ARLO); + } + + /* SMBUS Timeout error interrupt occurred ---------------------------------------------*/ + if (((itflags & SMBUS_FLAG_TIMEOUT) == SMBUS_FLAG_TIMEOUT) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BUSTIMEOUT; + + /* Clear TIMEOUT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_TIMEOUT); + } + + /* SMBUS Alert error interrupt occurred -----------------------------------------------*/ + if (((itflags & SMBUS_FLAG_ALERT) == SMBUS_FLAG_ALERT) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ALERT; + + /* Clear ALERT flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_ALERT); + } + + /* SMBUS Packet Error Check error interrupt occurred ----------------------------------*/ + if (((itflags & SMBUS_FLAG_PECERR) == SMBUS_FLAG_PECERR) && \ + ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI)) + { + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_PECERR; + + /* Clear PEC error flag */ + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_PECERR); + } + + if (hsmbus->ErrorCode != HAL_SMBUS_ERROR_NONE) + { + /* Flush TX register */ + SMBUS_Flush_TXDR(hsmbus); + } + + /* Store current volatile hsmbus->ErrorCode, misra rule */ + tmperror = hsmbus->ErrorCode; + + /* Call the Error Callback in case of Error detected */ + if ((tmperror != HAL_SMBUS_ERROR_NONE) && (tmperror != HAL_SMBUS_ERROR_ACKF)) + { + /* Do not Reset the HAL state in case of ALERT error */ + if ((tmperror & HAL_SMBUS_ERROR_ALERT) != HAL_SMBUS_ERROR_ALERT) + { + /* Store current volatile hsmbus->State, misra rule */ + tmpstate = hsmbus->State; + + if (((tmpstate & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX) + || ((tmpstate & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX)) + { + /* Reset only HAL_SMBUS_STATE_SLAVE_BUSY_XX */ + /* keep HAL_SMBUS_STATE_LISTEN if set */ + hsmbus->PreviousState = HAL_SMBUS_STATE_READY; + hsmbus->State = HAL_SMBUS_STATE_LISTEN; + } + } + + /* Call the Error callback to inform upper layer */ +#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1) + hsmbus->ErrorCallback(hsmbus); +#else + HAL_SMBUS_ErrorCallback(hsmbus); +#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Handle SMBUS Communication Timeout. + * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains + * the configuration information for the specified SMBUS. + * @param Flag Specifies the SMBUS flag to check. + * @param Status The new Flag status (SET or RESET). + * @param Timeout Timeout duration + * @retval HAL status + */ +static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, + FlagStatus Status, uint32_t Timeout) +{ + uint32_t tickstart = HAL_GetTick(); + + /* Wait until flag is set */ + while ((FlagStatus)(__HAL_SMBUS_GET_FLAG(hsmbus, Flag)) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL)) + { + hsmbus->PreviousState = hsmbus->State; + hsmbus->State = HAL_SMBUS_STATE_READY; + + /* Update SMBUS error code */ + hsmbus->ErrorCode |= HAL_SMBUS_ERROR_HALTIMEOUT; + + /* Process Unlocked */ + __HAL_UNLOCK(hsmbus); + + return HAL_ERROR; + } + } + } + + return HAL_OK; +} + +/** + * @brief SMBUS Tx data register flush process. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_Flush_TXDR(SMBUS_HandleTypeDef *hsmbus) +{ + /* If a pending TXIS flag is set */ + /* Write a dummy data in TXDR to clear it */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TXIS) != RESET) + { + hsmbus->Instance->TXDR = 0x00U; + } + + /* Flush TX register if not empty */ + if (__HAL_SMBUS_GET_FLAG(hsmbus, SMBUS_FLAG_TXE) == RESET) + { + __HAL_SMBUS_CLEAR_FLAG(hsmbus, SMBUS_FLAG_TXE); + } +} + +/** + * @brief Handle SMBUSx communication when starting transfer or during transfer (TC or TCR flag are set). + * @param hsmbus SMBUS handle. + * @param DevAddress specifies the slave address to be programmed. + * @param Size specifies the number of bytes to be programmed. + * This parameter must be a value between 0 and 255. + * @param Mode New state of the SMBUS START condition generation. + * This parameter can be one or a combination of the following values: + * @arg @ref SMBUS_RELOAD_MODE Enable Reload mode. + * @arg @ref SMBUS_AUTOEND_MODE Enable Automatic end mode. + * @arg @ref SMBUS_SOFTEND_MODE Enable Software end mode and Reload mode. + * @arg @ref SMBUS_SENDPEC_MODE Enable Packet Error Calculation mode. + * @param Request New state of the SMBUS START condition generation. + * This parameter can be one of the following values: + * @arg @ref SMBUS_NO_STARTSTOP Don't Generate stop and start condition. + * @arg @ref SMBUS_GENERATE_STOP Generate stop condition (Size should be set to 0). + * @arg @ref SMBUS_GENERATE_START_READ Generate Restart for read request. + * @arg @ref SMBUS_GENERATE_START_WRITE Generate Restart for write request. + * @retval None + */ +static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, + uint32_t Mode, uint32_t Request) +{ + /* Check the parameters */ + assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance)); + assert_param(IS_SMBUS_TRANSFER_MODE(Mode)); + assert_param(IS_SMBUS_TRANSFER_REQUEST(Request)); + + /* update CR2 register */ + MODIFY_REG(hsmbus->Instance->CR2, + ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \ + (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31UL - I2C_CR2_RD_WRN_Pos))) | \ + I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_PECBYTE)), \ + (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \ + (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \ + (uint32_t)Mode | (uint32_t)Request)); +} + +/** + * @brief Convert SMBUSx OTHER_xxx XferOptions to functional XferOptions. + * @param hsmbus SMBUS handle. + * @retval None + */ +static void SMBUS_ConvertOtherXferOptions(SMBUS_HandleTypeDef *hsmbus) +{ + /* if user set XferOptions to SMBUS_OTHER_FRAME_NO_PEC */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to SMBUS_FIRST_FRAME */ + if (hsmbus->XferOptions == SMBUS_OTHER_FRAME_NO_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_FRAME; + } + /* else if user set XferOptions to SMBUS_OTHER_FRAME_WITH_PEC */ + /* it request implicitly to generate a restart condition */ + /* set XferOptions to SMBUS_FIRST_FRAME | SMBUS_SENDPEC_MODE */ + else if (hsmbus->XferOptions == SMBUS_OTHER_FRAME_WITH_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_FRAME | SMBUS_SENDPEC_MODE; + } + /* else if user set XferOptions to SMBUS_OTHER_AND_LAST_FRAME_NO_PEC */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to SMBUS_FIRST_AND_LAST_FRAME_NO_PEC */ + else if (hsmbus->XferOptions == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_AND_LAST_FRAME_NO_PEC; + } + /* else if user set XferOptions to SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC */ + /* it request implicitly to generate a restart condition */ + /* then generate a stop condition at the end of transfer */ + /* set XferOptions to SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC */ + else if (hsmbus->XferOptions == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC) + { + hsmbus->XferOptions = SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC; + } + else + { + /* Nothing to do */ + } +} +/** + * @} + */ + +#endif /* HAL_SMBUS_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smbus_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smbus_ex.c new file mode 100644 index 0000000000..f58c2c560e --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_smbus_ex.c @@ -0,0 +1,128 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_smbus_ex.c + * @author MCD Application Team + * @brief SMBUS Extended HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of SMBUS Extended peripheral: + * + Extended features functions + * + FastModePlus Functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### SMBUS peripheral Extended features ##### + ============================================================================== + + [..] Comparing to other previous devices, the SMBUS interface for STM32WL3x + devices contains the following additional features + + (+) Disable or enable Fast Mode Plus + + ##### How to use this driver ##### + ============================================================================== + (#) Configure the enable or disable of fast mode plus driving capability using the functions : + (++) HAL_SMBUSEx_EnableFastModePlus() + (++) HAL_SMBUSEx_DisableFastModePlus() + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup SMBUSEx SMBUSEx + * @brief SMBUS Extended HAL module driver + * @{ + */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup SMBUSEx_Exported_Functions SMBUS Extended Exported Functions + * @{ + */ + +/** @defgroup SMBUSEx_Exported_Functions_Group3 Fast Mode Plus Functions + * @brief Fast Mode Plus Functions + * +@verbatim + =============================================================================== + ##### Fast Mode Plus Functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Configure Fast Mode Plus + +@endverbatim + * @{ + */ + +/** + * @brief Enable the SMBUS fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref SMBUSEx_FastModePlus values + * @retval None + */ +void HAL_SMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_SMBUS_FASTMODEPLUS(ConfigFastModePlus)); + + /* Enable fast mode plus driving capability for selected pin */ + SET_BIT(SYSCFG->I2C_FMP_CTRL, (uint32_t)ConfigFastModePlus); +} + +/** + * @brief Disable the SMBUS fast mode plus driving capability. + * @param ConfigFastModePlus Selects the pin. + * This parameter can be one of the @ref SMBUSEx_FastModePlus values + * @retval None + */ +void HAL_SMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus) +{ + /* Check the parameter */ + assert_param(IS_SMBUS_FASTMODEPLUS(ConfigFastModePlus)); + + /* Disable fast mode plus driving capability for selected pin */ + CLEAR_BIT(SYSCFG->I2C_FMP_CTRL, (uint32_t)ConfigFastModePlus); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SMBUS_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_spi.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_spi.c new file mode 100644 index 0000000000..b9794a53f4 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_spi.c @@ -0,0 +1,4455 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_spi.c + * @author MCD Application Team + * @brief SPI HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Serial Peripheral Interface (SPI) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The SPI HAL driver can be used as follows: + + (#) Declare a SPI_HandleTypeDef handle structure, for example: + SPI_HandleTypeDef hspi; + + (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit() API: + (##) Enable the SPIx interface clock + (##) SPI pins configuration + (+++) Enable the clock for the SPI GPIOs + (+++) Configure these SPI pins as alternate function push-pull + (##) NVIC configuration if you need to use interrupt process + (+++) Configure the SPIx interrupt priority + (+++) Enable the NVIC SPI IRQ handle + (##) DMA Configuration if you need to use DMA process + (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive Stream/Channel + (+++) Enable the DMAx clock + (+++) Configure the DMA handle parameters + (+++) Configure the DMA Tx or Rx Stream/Channel + (+++) Associate the initialized hdma_tx(or _rx) handle to the hspi DMA Tx or Rx handle + (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream/Channel + + (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS + management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure. + + (#) Initialize the SPI registers by calling the HAL_SPI_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_SPI_MspInit() API. + [..] + Circular mode restriction: + (#) The DMA circular mode cannot be used when the SPI is configured in these modes: + (##) Master 2Lines RxOnly + (##) Master 1Line Rx + (#) The CRC feature is not managed when the DMA circular mode is enabled + (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs + the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks + [..] + Master Receive mode restriction: + (#) In Master unidirectional receive-only mode (MSTR =1, BIDIMODE=0, RXONLY=1) or + bidirectional receive mode (MSTR=1, BIDIMODE=1, BIDIOE=0), to ensure that the SPI + does not initiate a new transfer the following procedure has to be respected: + (##) HAL_SPI_DeInit() + (##) HAL_SPI_Init() + [..] + Callback registration: + + (#) The compilation flag USE_HAL_SPI_REGISTER_CALLBACKS when set to 1U + allows the user to configure dynamically the driver callbacks. + Use Functions HAL_SPI_RegisterCallback() to register an interrupt callback. + + Function HAL_SPI_RegisterCallback() allows to register following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + + (#) Use function HAL_SPI_UnRegisterCallback to reset a callback to the default + weak function. + HAL_SPI_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (++) TxCpltCallback : SPI Tx Completed callback + (++) RxCpltCallback : SPI Rx Completed callback + (++) TxRxCpltCallback : SPI TxRx Completed callback + (++) TxHalfCpltCallback : SPI Tx Half Completed callback + (++) RxHalfCpltCallback : SPI Rx Half Completed callback + (++) TxRxHalfCpltCallback : SPI TxRx Half Completed callback + (++) ErrorCallback : SPI Error callback + (++) AbortCpltCallback : SPI Abort callback + (++) MspInitCallback : SPI Msp Init callback + (++) MspDeInitCallback : SPI Msp DeInit callback + + [..] + By default, after the HAL_SPI_Init() and when the state is HAL_SPI_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_SPI_MasterTxCpltCallback(), HAL_SPI_MasterRxCpltCallback(). + Exception done for MspInit and MspDeInit functions that are + reset to the legacy weak functions in the HAL_SPI_Init()/ HAL_SPI_DeInit() only when + these callbacks are null (not registered beforehand). + If MspInit or MspDeInit are not null, the HAL_SPI_Init()/ HAL_SPI_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state. + + [..] + Callbacks can be registered/unregistered in HAL_SPI_STATE_READY state only. + Exception done MspInit/MspDeInit functions that can be registered/unregistered + in HAL_SPI_STATE_READY or HAL_SPI_STATE_RESET state, + thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit. + Then, the user first registers the MspInit/MspDeInit user callbacks + using HAL_SPI_RegisterCallback() before calling HAL_SPI_DeInit() + or HAL_SPI_Init() function. + + [..] + When the compilation define USE_HAL_PPP_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registering feature is not available + and weak (surcharged) callbacks are used. + + [..] + Using the HAL it is not possible to reach all supported SPI frequency with the different SPI Modes, + the following table resume the max SPI frequency reached with data size 8bits/16bits, + according to frequency of the APBx Peripheral Clock (fPCLK) used by the SPI instance. + + @endverbatim + + Additional table : + + DataSize = SPI_DATASIZE_8BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + + DataSize = SPI_DATASIZE_16BIT: + +----------------------------------------------------------------------------------------------+ + | | | 2Lines Fullduplex | 2Lines RxOnly | 1Line | + | Process | Transfer mode |---------------------|----------------------|----------------------| + | | | Master | Slave | Master | Slave | Master | Slave | + |==============================================================================================| + | T | Polling | Fpclk/4 | Fpclk/8 | NA | NA | NA | NA | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | / | Interrupt | Fpclk/4 | Fpclk/16 | NA | NA | NA | NA | + | R |----------------|----------|----------|-----------|----------|-----------|----------| + | X | DMA | Fpclk/2 | Fpclk/2 | NA | NA | NA | NA | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/4 | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | R | Interrupt | Fpclk/8 | Fpclk/16 | Fpclk/8 | Fpclk/8 | Fpclk/8 | Fpclk/4 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/4 | Fpclk/2 | Fpclk/2 | Fpclk/16 | Fpclk/2 | Fpclk/16 | + |=========|================|==========|==========|===========|==========|===========|==========| + | | Polling | Fpclk/8 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/8 | + | |----------------|----------|----------|-----------|----------|-----------|----------| + | T | Interrupt | Fpclk/2 | Fpclk/4 | NA | NA | Fpclk/16 | Fpclk/8 | + | X |----------------|----------|----------|-----------|----------|-----------|----------| + | | DMA | Fpclk/2 | Fpclk/2 | NA | NA | Fpclk/8 | Fpclk/16 | + +----------------------------------------------------------------------------------------------+ + @note The max SPI frequency depend on SPI data size (4bits, 5bits,..., 8bits,...15bits, 16bits), + SPI mode(2 Lines fullduplex, 2 lines RxOnly, 1 line TX/RX) and Process mode (Polling, IT, DMA). + @note + (#) TX/RX processes are HAL_SPI_TransmitReceive(), HAL_SPI_TransmitReceive_IT() and HAL_SPI_TransmitReceive_DMA() + (#) RX processes are HAL_SPI_Receive(), HAL_SPI_Receive_IT() and HAL_SPI_Receive_DMA() + (#) TX processes are HAL_SPI_Transmit(), HAL_SPI_Transmit_IT() and HAL_SPI_Transmit_DMA() + + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup SPI SPI + * @brief SPI HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPI_Private_Constants SPI Private Constants + * @{ + */ +#define SPI_DEFAULT_TIMEOUT 100U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup SPI_Private_Functions SPI Private Functions + * @{ + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma); +static void SPI_DMAError(DMA_HandleTypeDef *hdma); +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart); +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi); +#if (USE_SPI_CRC != 0U) +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi); +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi); +#endif /* USE_SPI_CRC */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi); +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi); +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SPI_Exported_Functions SPI Exported Functions + * @{ + */ + +/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to initialize and + de-initialize the SPIx peripheral: + + (+) User must implement HAL_SPI_MspInit() function in which he configures + all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ). + + (+) Call the function HAL_SPI_Init() to configure the selected device with + the selected configuration: + (++) Mode + (++) Direction + (++) Data Size + (++) Clock Polarity and Phase + (++) NSS Management + (++) BaudRate Prescaler + (++) FirstBit + (++) TIMode + (++) CRC Calculation + (++) CRC Polynomial if CRC enabled + (++) CRC Length, used only with Data8 and Data16 + (++) FIFO reception threshold + + (+) Call the function HAL_SPI_DeInit() to restore the default configuration + of the selected SPIx peripheral. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the SPI according to the specified parameters + * in the SPI_InitTypeDef and initialize the associated handle. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi) +{ + uint32_t frxth; + + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + assert_param(IS_SPI_MODE(hspi->Init.Mode)); + assert_param(IS_SPI_DIRECTION(hspi->Init.Direction)); + assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize)); + assert_param(IS_SPI_NSS(hspi->Init.NSS)); + assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode)); + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit)); + assert_param(IS_SPI_TIMODE(hspi->Init.TIMode)); + if (hspi->Init.TIMode == SPI_TIMODE_DISABLE) + { + assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity)); + assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase)); + + if (hspi->Init.Mode == SPI_MODE_MASTER) + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + } + else + { + /* Baudrate prescaler not use in Motoraola Slave mode. force to default value */ + hspi->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; + } + } + else + { + assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler)); + + /* Force polarity and phase to TI protocaol requirements */ + hspi->Init.CLKPolarity = SPI_POLARITY_LOW; + hspi->Init.CLKPhase = SPI_PHASE_1EDGE; + } +#if (USE_SPI_CRC != 0U) + assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation)); + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial)); + assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength)); + } +#else + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; +#endif /* USE_SPI_CRC */ + + if (hspi->State == HAL_SPI_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hspi->Lock = HAL_UNLOCKED; + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + /* Init the SPI Callback settings */ + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + + if (hspi->MspInitCallback == NULL) + { + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + } + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + hspi->MspInitCallback(hspi); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_SPI_MspInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the selected SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Align by default the rs fifo threshold on the data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + frxth = SPI_RXFIFO_THRESHOLD_HF; + } + else + { + frxth = SPI_RXFIFO_THRESHOLD_QF; + } + + /* CRC calculation is valid only for 16Bit and 8 Bit */ + if ((hspi->Init.DataSize != SPI_DATASIZE_16BIT) && (hspi->Init.DataSize != SPI_DATASIZE_8BIT)) + { + /* CRC must be disabled */ + hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + } + + /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/ + /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management, + Communication speed, First bit and CRC calculation state */ + WRITE_REG(hspi->Instance->CR1, ((hspi->Init.Mode & (SPI_CR1_MSTR | SPI_CR1_SSI)) | + (hspi->Init.Direction & (SPI_CR1_RXONLY | SPI_CR1_BIDIMODE)) | + (hspi->Init.CLKPolarity & SPI_CR1_CPOL) | + (hspi->Init.CLKPhase & SPI_CR1_CPHA) | + (hspi->Init.NSS & SPI_CR1_SSM) | + (hspi->Init.BaudRatePrescaler & SPI_CR1_BR_Msk) | + (hspi->Init.FirstBit & SPI_CR1_LSBFIRST) | + (hspi->Init.CRCCalculation & SPI_CR1_CRCEN))); +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCL Configuration -------------------*/ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Align the CRC Length on the data size */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE) + { + /* CRC Length aligned on the data size : value set by default */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_16BIT; + } + else + { + hspi->Init.CRCLength = SPI_CRC_LENGTH_8BIT; + } + } + + /* Configure : CRC Length */ + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCL); + } + } +#endif /* USE_SPI_CRC */ + + /* Configure : NSS management, TI Mode, NSS Pulse, Data size and Rx Fifo threshold */ + WRITE_REG(hspi->Instance->CR2, (((hspi->Init.NSS >> 16U) & SPI_CR2_SSOE) | + (hspi->Init.TIMode & SPI_CR2_FRF) | + (hspi->Init.NSSPMode & SPI_CR2_NSSP) | + (hspi->Init.DataSize & SPI_CR2_DS_Msk) | + (frxth & SPI_CR2_FRXTH))); + +#if (USE_SPI_CRC != 0U) + /*---------------------------- SPIx CRCPOLY Configuration ------------------*/ + /* Configure : CRC Polynomial */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + WRITE_REG(hspi->Instance->CRCPR, (hspi->Init.CRCPolynomial & SPI_CRCPR_CRCPOLY_Msk)); + } +#endif /* USE_SPI_CRC */ + +#if defined(SPI_I2SCFGR_I2SMOD) + /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */ + CLEAR_BIT(hspi->Instance->I2SCFGR, SPI_I2SCFGR_I2SMOD); +#endif /* SPI_I2SCFGR_I2SMOD */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_READY; + + return HAL_OK; +} + +/** + * @brief De-Initialize the SPI peripheral. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi) +{ + /* Check the SPI handle allocation */ + if (hspi == NULL) + { + return HAL_ERROR; + } + + /* Check SPI Instance parameter */ + assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance)); + + hspi->State = HAL_SPI_STATE_BUSY; + + /* Disable the SPI Peripheral Clock */ + __HAL_SPI_DISABLE(hspi); + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + if (hspi->MspDeInitCallback == NULL) + { + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + } + + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + hspi->MspDeInitCallback(hspi); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */ + HAL_SPI_MspDeInit(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->State = HAL_SPI_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspInit should be implemented in the user file + */ +} + +/** + * @brief De-Initialize the SPI MSP. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_MspDeInit should be implemented in the user file + */ +} + +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) +/** + * @brief Register a User SPI Callback + * To be used instead of the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be registered + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, + pSPI_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + hspi->ErrorCode |= HAL_SPI_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = pCallback; + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = pCallback; + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = pCallback; + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = pCallback; + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = pCallback; + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = pCallback; + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} + +/** + * @brief Unregister an SPI Callback + * SPI callback is redirected to the weak predefined callback + * @param hspi Pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI. + * @param CallbackID ID of the callback to be unregistered + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Process locked */ + __HAL_LOCK(hspi); + + if (HAL_SPI_STATE_READY == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_TX_COMPLETE_CB_ID : + hspi->TxCpltCallback = HAL_SPI_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_SPI_RX_COMPLETE_CB_ID : + hspi->RxCpltCallback = HAL_SPI_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_SPI_TX_RX_COMPLETE_CB_ID : + hspi->TxRxCpltCallback = HAL_SPI_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_SPI_TX_HALF_COMPLETE_CB_ID : + hspi->TxHalfCpltCallback = HAL_SPI_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_SPI_RX_HALF_COMPLETE_CB_ID : + hspi->RxHalfCpltCallback = HAL_SPI_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_SPI_TX_RX_HALF_COMPLETE_CB_ID : + hspi->TxRxHalfCpltCallback = HAL_SPI_TxRxHalfCpltCallback; /* Legacy weak TxRxHalfCpltCallback */ + break; + + case HAL_SPI_ERROR_CB_ID : + hspi->ErrorCallback = HAL_SPI_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_SPI_ABORT_CB_ID : + hspi->AbortCpltCallback = HAL_SPI_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_SPI_STATE_RESET == hspi->State) + { + switch (CallbackID) + { + case HAL_SPI_MSPINIT_CB_ID : + hspi->MspInitCallback = HAL_SPI_MspInit; /* Legacy weak MspInit */ + break; + + case HAL_SPI_MSPDEINIT_CB_ID : + hspi->MspDeInitCallback = HAL_SPI_MspDeInit; /* Legacy weak MspDeInit */ + break; + + default : + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_INVALID_CALLBACK); + + /* Return error status */ + status = HAL_ERROR; + } + + /* Release Lock */ + __HAL_UNLOCK(hspi); + return status; +} +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the SPI + data transfers. + + [..] The SPI supports master and slave mode : + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These APIs return the HAL status. + The end of the data processing will be indicated through the + dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected + + (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA) + exist for 1Line (simplex) and 2Lines (full duplex) modes. + +@endverbatim + * @{ + */ + +/** + * @brief Transmit an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint32_t tickstart; + uint16_t initial_TxXferCount; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + initial_TxXferCount = Size; + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + /* Transmit data in 16 Bit mode */ + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + } + /* Transmit data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + if (hspi->TxXferCount > 1U) + { + /* write on the data register in packing mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr ++; + hspi->TxXferCount--; + } + } + while (hspi->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) + { + if (hspi->TxXferCount > 1U) + { + /* write on the data register in packing mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *((__IO uint8_t *)&hspi->Instance->DR) = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + } +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + uint32_t tickstart; + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout); + } + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + /* this is done to handle the CRCNEXT before the latest data */ + hspi->RxXferCount--; + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Configure communication direction: 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Receive data in 8 Bit mode */ + if (hspi->Init.DataSize <= SPI_DATASIZE_8BIT) + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + /* read the received data */ + (* (uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint8_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + } + else + { + /* Transfer loop */ + while (hspi->RxXferCount > 0U) + { + /* Check the RXNE flag */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + } + else + { + /* Timeout management */ + if ((((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) || (Timeout == 0U)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Handle the CRC Transmission */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* freeze the CRC before the latest data */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + + /* Read the latest data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* the latest data has not been received */ + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + + /* Receive last data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + } + /* Receive last data in 8 Bit mode */ + else + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + } + + /* Wait the CRC data */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + + /* Read CRC to Flush DR and RXNE flag */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + hspi->State = HAL_SPI_STATE_READY; + /* Unlock the process */ + __HAL_UNLOCK(hspi); + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Transmit and Receive an amount of data in blocking mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, + uint32_t Timeout) +{ + uint16_t initial_TxXferCount; + uint16_t initial_RxXferCount; + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + uint32_t spi_cr1; + uint32_t spi_cr2; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Variable used to alternate Rx and Tx during transfer */ + uint32_t txallowed = 1U; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + initial_TxXferCount = Size; + initial_RxXferCount = Size; +#if (USE_SPI_CRC != 0U) + spi_cr1 = READ_REG(hspi->Instance->CR1); + spi_cr2 = READ_REG(hspi->Instance->CR2); +#endif /* USE_SPI_CRC */ + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + return HAL_BUSY; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferCount = Size; + hspi->RxXferSize = Size; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferCount = Size; + hspi->TxXferSize = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the Rx Fifo threshold */ + if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (initial_RxXferCount > 1U)) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set fiforxthreshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Transmit and Receive data in 16 Bit mode */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Check RXNE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if (((HAL_GetTick() - tickstart) >= Timeout) && (Timeout != HAL_MAX_DELAY)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + /* Transmit and Receive data in 8 Bit mode */ + else + { + if ((hspi->Init.Mode == SPI_MODE_SLAVE) || (initial_TxXferCount == 0x01U)) + { + if (hspi->TxXferCount > 1U) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + } + while ((hspi->TxXferCount > 0U) || (hspi->RxXferCount > 0U)) + { + /* Check TXE flag */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE)) && (hspi->TxXferCount > 0U) && (txallowed == 1U)) + { + if (hspi->TxXferCount > 1U) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + else + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + /* Next Data is a reception (Rx). Tx not allowed */ + txallowed = 0U; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->TxXferCount == 0U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + /* Set NSS Soft to received correctly the CRC on slave mode with NSS pulse activated */ + if ((READ_BIT(spi_cr1, SPI_CR1_MSTR) == 0U) && (READ_BIT(spi_cr2, SPI_CR2_NSSP) == SPI_CR2_NSSP)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_SSM); + } + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + } + + /* Wait until RXNE flag is reset */ + if ((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE)) && (hspi->RxXferCount > 0U)) + { + if (hspi->RxXferCount > 1U) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)hspi->Instance->DR; + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount -= 2U; + if (hspi->RxXferCount <= 1U) + { + /* Set RX Fifo threshold before to switch on 8 bit data size */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + } + else + { + (*(uint8_t *)hspi->pRxBuffPtr) = *(__IO uint8_t *)&hspi->Instance->DR; + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + } + /* Next Data is a Transmission (Tx). Tx is allowed */ + txallowed = 1U; + } + if ((((HAL_GetTick() - tickstart) >= Timeout) && ((Timeout != HAL_MAX_DELAY))) || (Timeout == 0U)) + { + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + } + } + +#if (USE_SPI_CRC != 0U) + /* Read CRC from DR to close CRC calculation process */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until TXE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + /* Read CRC */ + if (hspi->Init.DataSize == SPI_DATASIZE_16BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, Timeout, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + hspi->State = HAL_SPI_STATE_READY; + __HAL_UNLOCK(hspi); + return HAL_TIMEOUT; + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } + + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + /* Clear CRC Flag */ + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, Timeout, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } + + + hspi->State = HAL_SPI_STATE_READY; + /* Unlock the process */ + __HAL_UNLOCK(hspi); + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + return HAL_ERROR; + } + else + { + return HAL_OK; + } +} + +/** + * @brief Transmit an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + hspi->RxISR = NULL; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->TxISR = SPI_TxISR_16BIT; + } + else + { + hspi->TxISR = SPI_TxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable TXE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size); + } + + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pTxBuffPtr = (uint8_t *)NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + hspi->TxISR = NULL; + + /* Check the data size to adapt Rx threshold and the set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_16BIT; + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_RxISR_8BIT; + } + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Note : The SPI must be enabled after unlocking current process + to avoid the risk of SPI interrupt handle execution before current + process unlock */ + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + return HAL_OK; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with Interrupt. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @param Size amount of data to be sent and received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || \ + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + return HAL_BUSY; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Set the function for IT treatment */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + hspi->RxISR = SPI_2linesRxISR_16BIT; + hspi->TxISR = SPI_2linesTxISR_16BIT; + } + else + { + hspi->RxISR = SPI_2linesRxISR_8BIT; + hspi->TxISR = SPI_2linesTxISR_8BIT; + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->CRCSize = 1U; + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)) + { + hspi->CRCSize = 2U; + } + SPI_RESET_CRC(hspi); + } + else + { + hspi->CRCSize = 0U; + } +#endif /* USE_SPI_CRC */ + + /* Check if packing mode is enabled and if there is more than 2 data to receive */ + if ((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (Size >= 2U)) + { + /* Set RX Fifo threshold according the reception data length: 16 bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8 bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + /* Enable TXE, RXNE and ERR interrupt */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + return HAL_OK; +} + +/** + * @brief Transmit an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction)); + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_TX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->pRxBuffPtr = (uint8_t *)NULL; + hspi->TxISR = NULL; + hspi->RxISR = NULL; + hspi->RxXferSize = 0U; + hspi->RxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_TX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Set the SPI TxDMA Half transfer complete callback */ + hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt; + + /* Set the SPI TxDMA transfer complete callback */ + hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt; + + /* Set the DMA error callback */ + hspi->hdmatx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmatx->XferAbortCallback = NULL; + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + /* Packing mode is enabled only if the DMA setting is HALWORD */ + if ((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)) + { + /* Check the even/odd of the data size + crc if enabled */ + if ((hspi->TxXferCount & 0x1U) == 0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U); + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in non-blocking mode with DMA. + * @note In case of MASTER mode and SPI_DIRECTION_2LINES direction, hdmatx shall be defined. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pData pointer to data buffer + * @note When the CRC feature is enabled the pData Length must be Size + 1. + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size) +{ + /* Check rx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + + if (hspi->State != HAL_SPI_STATE_READY) + { + return HAL_BUSY; + } + + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + hspi->State = HAL_SPI_STATE_BUSY_RX; + + /* Check tx dma handle */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */ + return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size); + } + + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Set the transaction information */ + hspi->State = HAL_SPI_STATE_BUSY_RX; + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pRxBuffPtr = (uint8_t *)pData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /*Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + hspi->TxXferSize = 0U; + hspi->TxXferCount = 0U; + + /* Configure communication direction : 1Line */ + if (hspi->Init.Direction == SPI_DIRECTION_1LINE) + { + /* Disable SPI Peripheral before set 1Line direction (BIDIOE bit) */ + __HAL_SPI_DISABLE(hspi); + SPI_1LINE_RX(hspi); + } + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Set the SPI RxDMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + + /* Set the SPI Rx DMA transfer complete callback */ + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + return HAL_OK; +} + +/** + * @brief Transmit and Receive an amount of data in non-blocking mode with DMA. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param pTxData pointer to transmission data buffer + * @param pRxData pointer to reception data buffer + * @note When the CRC feature is enabled the pRxData Length must be Size + 1 + * @param Size amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + uint32_t tmp_mode; + HAL_SPI_StateTypeDef tmp_state; + + /* Check rx & tx dma handles */ + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx)); + assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx)); + + /* Check Direction parameter */ + assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction)); + + /* Init temporary variables */ + tmp_state = hspi->State; + tmp_mode = hspi->Init.Mode; + + if (!((tmp_state == HAL_SPI_STATE_READY) || + ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX)))) + { + return HAL_BUSY; + } + + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* Process locked */ + __HAL_LOCK(hspi); + + /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */ + if (hspi->State != HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_BUSY_TX_RX; + } + + /* Set the transaction information */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + hspi->pTxBuffPtr = (uint8_t *)pTxData; + hspi->TxXferSize = Size; + hspi->TxXferCount = Size; + hspi->pRxBuffPtr = (uint8_t *)pRxData; + hspi->RxXferSize = Size; + hspi->RxXferCount = Size; + + /* Init field not used in handle to zero */ + hspi->RxISR = NULL; + hspi->TxISR = NULL; + +#if (USE_SPI_CRC != 0U) + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } +#endif /* USE_SPI_CRC */ + + /* Reset the threshold bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX | SPI_CR2_LDMARX); + + /* The packing mode management is enabled by the DMA settings according the spi data size */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Set fiforxthreshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + else + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + if ((hspi->TxXferSize & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = hspi->TxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX); + hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U; + } + } + + if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD) + { + /* Set RX Fifo threshold according the reception data length: 16bit */ + CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + + if ((hspi->RxXferCount & 0x1U) == 0x0U) + { + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = hspi->RxXferCount >> 1U; + } + else + { + SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX); + hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U; + } + } + } + + /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */ + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + /* Set the SPI Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt; + } + else + { + /* Set the SPI Tx/Rx DMA Half transfer complete callback */ + hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt; + hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt; + } + + /* Set the DMA error callback */ + hspi->hdmarx->XferErrorCallback = SPI_DMAError; + + /* Set the DMA AbortCpltCallback */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Enable the Rx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, + hspi->RxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } + + /* Enable Rx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing + is performed in DMA reception complete callback */ + hspi->hdmatx->XferHalfCpltCallback = NULL; + hspi->hdmatx->XferCpltCallback = NULL; + hspi->hdmatx->XferErrorCallback = NULL; + hspi->hdmatx->XferAbortCallback = NULL; + + /* Enable the Tx DMA Stream/Channel */ + if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, + hspi->TxXferCount)) + { + /* Update SPI error code */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + return HAL_ERROR; + } + + /* Check if the SPI is already enabled */ + if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) + { + /* Enable SPI peripheral */ + __HAL_SPI_ENABLE(hspi); + } + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + /* Enable the SPI Error Interrupt Bit */ + __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR)); + + /* Enable Tx DMA Request */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfer (blocking mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmatx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + } + + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel : use blocking DMA Abort API (no callback) */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_AbortCpltCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = NULL; + + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort(hspi->hdmarx) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXDMAEN)); + } + } + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->state to ready */ + hspi->State = HAL_SPI_STATE_READY; + + return errorcode; +} + +/** + * @brief Abort ongoing transfer (Interrupt mode). + * @param hspi SPI handle. + * @note This procedure could be used for aborting any ongoing transfer (Tx and Rx), + * started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable SPI Interrupts (depending of transfer direction) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_Abort_IT(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode; + uint32_t abortcplt ; + __IO uint32_t count; + __IO uint32_t resetcount; + + /* Initialized local variable */ + errorcode = HAL_OK; + abortcplt = 1U; + resetcount = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + count = resetcount; + + /* Clear ERRIE interrupt to avoid error interrupts generation during Abort procedure */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_ERRIE); + + /* Change Rx and Tx Irq Handler to Disable TXEIE, RXNEIE and ERRIE interrupts */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)) + { + hspi->TxISR = SPI_AbortTx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + hspi->RxISR = SPI_AbortRx_ISR; + /* Wait HAL_SPI_STATE_ABORT state */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (hspi->State != HAL_SPI_STATE_ABORT); + /* Reset Timeout Counter */ + count = resetcount; + } + + /* If DMA Tx and/or DMA Rx Handles are associated to SPI Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (hspi->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + hspi->hdmatx->XferAbortCallback = SPI_DMATxAbortCallback; + } + else + { + hspi->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (hspi->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + hspi->hdmarx->XferAbortCallback = SPI_DMARxAbortCallback; + } + else + { + hspi->hdmarx->XferAbortCallback = NULL; + } + } + + /* Disable the SPI DMA Tx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXDMAEN)) + { + /* Abort the SPI DMA Tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + /* Abort DMA Tx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmatx) != HAL_OK) + { + hspi->hdmatx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + /* Disable the SPI DMA Rx request if enabled */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXDMAEN)) + { + /* Abort the SPI DMA Rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + /* Abort DMA Rx Handle linked to SPI Peripheral */ + if (HAL_DMA_Abort_IT(hspi->hdmarx) != HAL_OK) + { + hspi->hdmarx->XferAbortCallback = NULL; + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + else + { + abortcplt = 0U; + } + } + } + + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check error during Abort procedure */ + if (hspi->ErrorCode == HAL_SPI_ERROR_ABORT) + { + /* return HAL_Error in case of error during Abort procedure */ + errorcode = HAL_ERROR; + } + else + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + + return errorcode; +} + +/** + * @brief Pause the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi) +{ + /* Process Locked */ + __HAL_LOCK(hspi); + + /* Enable the SPI DMA Tx & Rx requests */ + SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi) +{ + HAL_StatusTypeDef errorcode = HAL_OK; + /* The Lock is not implemented on this API to allow the user application + to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback(): + when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated + and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback() + */ + + /* Abort the SPI DMA tx Stream/Channel */ + if (hspi->hdmatx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + /* Abort the SPI DMA rx Stream/Channel */ + if (hspi->hdmarx != NULL) + { + if (HAL_OK != HAL_DMA_Abort(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + errorcode = HAL_ERROR; + } + } + + /* Disable the SPI DMA Tx & Rx requests */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + hspi->State = HAL_SPI_STATE_READY; + return errorcode; +} + +/** + * @brief Handle SPI interrupt request. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval None + */ +void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi) +{ + uint32_t itsource = hspi->Instance->CR2; + uint32_t itflag = hspi->Instance->SR; + + /* SPI in mode Receiver ----------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) == RESET) && + (SPI_CHECK_FLAG(itflag, SPI_FLAG_RXNE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_RXNE) != RESET)) + { + hspi->RxISR(hspi); + return; + } + + /* SPI in mode Transmitter -------------------------------------------------*/ + if ((SPI_CHECK_FLAG(itflag, SPI_FLAG_TXE) != RESET) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_TXE) != RESET)) + { + hspi->TxISR(hspi); + return; + } + + /* SPI in Error Treatment --------------------------------------------------*/ + if (((SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) || (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + || (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET)) && (SPI_CHECK_IT_SOURCE(itsource, SPI_IT_ERR) != RESET)) + { + /* SPI Overrun error interrupt occurred ----------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_OVR) != RESET) + { + if (hspi->State != HAL_SPI_STATE_BUSY_TX) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_OVR); + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + else + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + return; + } + } + + /* SPI Mode Fault error interrupt occurred -------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_MODF) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_MODF); + __HAL_SPI_CLEAR_MODFFLAG(hspi); + } + + /* SPI Frame error interrupt occurred ------------------------------------*/ + if (SPI_CHECK_FLAG(itflag, SPI_FLAG_FRE) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FRE); + __HAL_SPI_CLEAR_FREFLAG(hspi); + } + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Disable all interrupts */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR); + + hspi->State = HAL_SPI_STATE_READY; + /* Disable the SPI DMA requests if enabled */ + if ((HAL_IS_BIT_SET(itsource, SPI_CR2_TXDMAEN)) || (HAL_IS_BIT_SET(itsource, SPI_CR2_RXDMAEN))) + { + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN)); + + /* Abort the SPI DMA Rx channel */ + if (hspi->hdmarx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmarx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmarx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + /* Abort the SPI DMA Tx channel */ + if (hspi->hdmatx != NULL) + { + /* Set the SPI DMA Abort callback : + will lead to call HAL_SPI_ErrorCallback() at end of DMA abort procedure */ + hspi->hdmatx->XferAbortCallback = SPI_DMAAbortOnError; + if (HAL_OK != HAL_DMA_Abort_IT(hspi->hdmatx)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + } + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxHalfCpltCallback should be implemented in the user file + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief Tx and Rx Half Transfer callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file + */ +} + +/** + * @brief SPI error callback. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_ErrorCallback should be implemented in the user file + */ + /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes + and user can use HAL_SPI_GetError() API to check the latest error occurred + */ +} + +/** + * @brief SPI Abort Complete callback. + * @param hspi SPI handle. + * @retval None + */ +__weak void HAL_SPI_AbortCpltCallback(SPI_HandleTypeDef *hspi) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hspi); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_SPI_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions + * @brief SPI control functions + * +@verbatim + =============================================================================== + ##### Peripheral State and Errors functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the SPI. + (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral + (+) HAL_SPI_GetError() check in run-time Errors occurring during communication +@endverbatim + * @{ + */ + +/** + * @brief Return the SPI handle state. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI state + */ +HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi) +{ + /* Return SPI handle state */ + return hspi->State; +} + +/** + * @brief Return the SPI error code. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval SPI error code in bitmap format + */ +uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi) +{ + /* Return SPI ErrorCode */ + return hspi->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup SPI_Private_Functions + * @brief Private functions + * @{ + */ + +/** + * @brief DMA SPI transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received data is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->TxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Tx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Wait until RXNE flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC */ + if (hspi->Init.DataSize > SPI_DATASIZE_8BIT) + { + /* Read 16bit CRC */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + else + { + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT) + { + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + } + } +#endif /* USE_SPI_CRC */ + + /* Check if we are in Master RX 2 line mode */ + if ((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER)) + { + /* Disable Rx/Tx DMA Request (done by default to handle the case master rx direction 2 lines) */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + } + else + { + /* Normal case */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + } + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_FLAG; + } + + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + uint32_t tickstart; +#if (USE_SPI_CRC != 0U) + __IO uint32_t tmpreg = 0U; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; +#endif /* USE_SPI_CRC */ + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* DMA Normal Mode */ + if ((hdma->Instance->CCR & DMA_CCR_CIRC) != DMA_CCR_CIRC) + { + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + +#if (USE_SPI_CRC != 0U) + /* CRC handling */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_8BIT)) + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_QUARTER_FULL, SPI_DEFAULT_TIMEOUT, + tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + else + { + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_HALF_FULL, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + /* Error on the CRC reception */ + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + } + /* Read CRC to Flush DR and RXNE flag */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + } + } +#endif /* USE_SPI_CRC */ + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Disable Rx/Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + hspi->TxXferCount = 0U; + hspi->RxXferCount = 0U; + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR)) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + } +#endif /* USE_SPI_CRC */ + + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + return; + } + } + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Tx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxHalfCpltCallback(hspi); +#else + HAL_SPI_TxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half receive process complete callback + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user Rx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxHalfCpltCallback(hspi); +#else + HAL_SPI_RxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI half transmit receive process complete callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Call user TxRx half complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxHalfCpltCallback(hspi); +#else + HAL_SPI_TxRxHalfCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication error callback. + * @param hdma pointer to a DMA_HandleTypeDef structure that contains + * the configuration information for the specified DMA module. + * @retval None + */ +static void SPI_DMAError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Stop the disable DMA transfer on SPI side */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN); + + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA); + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + hspi->hdmatx->XferAbortCallback = NULL; + + /* Disable Tx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmarx != NULL) + { + if (hspi->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA SPI Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void SPI_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */ + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + hspi->hdmarx->XferAbortCallback = NULL; + + /* Disable Rx DMA Request */ + CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check if an Abort process is still ongoing */ + if (hspi->hdmatx != NULL) + { + if (hspi->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA Stream/Channel are aborted, call user Abort Complete callback */ + hspi->RxXferCount = 0U; + hspi->TxXferCount = 0U; + + /* Check no error during Abort procedure */ + if (hspi->ErrorCode != HAL_SPI_ERROR_ABORT) + { + /* Reset errorCode */ + hspi->ErrorCode = HAL_SPI_ERROR_NONE; + } + + /* Clear the Error flags in the SR register */ + __HAL_SPI_CLEAR_OVRFLAG(hspi); + __HAL_SPI_CLEAR_FREFLAG(hspi); + + /* Restore hspi->State to Ready */ + hspi->State = HAL_SPI_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->AbortCpltCallback(hspi); +#else + HAL_SPI_AbortCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ +} + +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in packing mode */ + if (hspi->RxXferCount > 1U) + { + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount -= 2U; + if (hspi->RxXferCount == 1U) + { + /* Set RX Fifo threshold according the reception data length: 8bit */ + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + } + } + /* Receive data in 8 Bit mode */ + else + { + *hspi->pRxBuffPtr = *((__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + } + + /* Check end of the reception */ + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD); + hspi->RxISR = SPI_2linesRxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Rx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC to flush Data Register */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + hspi->CRCSize--; + + /* Check end of the reception */ + if (hspi->CRCSize == 0U) + { + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 8-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in packing Bit mode */ + if (hspi->TxXferCount >= 2U) + { + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount -= 2U; + } + /* Transmit data in 8 Bit mode */ + else + { + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + } + + /* Check the end of the transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +/** + * @brief Rx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Receive data in 16 Bit mode */ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_2linesRxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + if (hspi->TxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg = 0U; + + /* Read 16bit CRC to flush Data Register */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + + /* Disable RXNE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE); + + SPI_CloseRxTx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Tx 16-bit handler for Transmit and Receive in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + /* Enable CRC Transmission */ + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Set CRC Next Bit to send CRC */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + return; + } +#endif /* USE_SPI_CRC */ + + /* Disable TXE interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE); + + if (hspi->RxXferCount == 0U) + { + SPI_CloseRxTx_ISR(hspi); + } + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 8-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + /* Read 8bit CRC to flush Data Register */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + + hspi->CRCSize--; + + if (hspi->CRCSize == 0U) + { + SPI_CloseRx_ISR(hspi); + } +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the receive 8-bit in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *hspi->pRxBuffPtr = (*(__IO uint8_t *)&hspi->Instance->DR); + hspi->pRxBuffPtr++; + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_8BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +#if (USE_SPI_CRC != 0U) +/** + * @brief Manage the CRC 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg = 0U; + + /* Read 16bit CRC to flush Data Register */ + tmpreg = READ_REG(hspi->Instance->DR); + /* To avoid GCC warning */ + UNUSED(tmpreg); + + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + SPI_CloseRx_ISR(hspi); +} +#endif /* USE_SPI_CRC */ + +/** + * @brief Manage the 16-bit receive in Interrupt context. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + *((uint16_t *)hspi->pRxBuffPtr) = (uint16_t)(hspi->Instance->DR); + hspi->pRxBuffPtr += sizeof(uint16_t); + hspi->RxXferCount--; + +#if (USE_SPI_CRC != 0U) + /* Enable CRC Transmission */ + if ((hspi->RxXferCount == 1U) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)) + { + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + + if (hspi->RxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + hspi->RxISR = SPI_RxISR_16BITCRC; + return; + } +#endif /* USE_SPI_CRC */ + SPI_CloseRx_ISR(hspi); + } +} + +/** + * @brief Handle the data 8-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi) +{ + *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr); + hspi->pTxBuffPtr++; + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle the data 16-bit transmit in Interrupt mode. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi) +{ + /* Transmit data in 16 Bit mode */ + hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr); + hspi->pTxBuffPtr += sizeof(uint16_t); + hspi->TxXferCount--; + + if (hspi->TxXferCount == 0U) + { +#if (USE_SPI_CRC != 0U) + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + /* Enable CRC Transmission */ + SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT); + } +#endif /* USE_SPI_CRC */ + SPI_CloseTx_ISR(hspi); + } +} + +/** + * @brief Handle SPI Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Flag SPI flag to check + * @param State flag state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 32U) >> 20U); + + while ((__HAL_SPI_GET_FLAG(hspi, Flag) ? SET : RESET) != State) + { + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if (count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle SPI FIFO Communication Timeout. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Fifo Fifo to check + * @param State Fifo state to check + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, + uint32_t Timeout, uint32_t Tickstart) +{ + __IO uint32_t count; + uint32_t tmp_timeout; + uint32_t tmp_tickstart; + __IO uint8_t *ptmpreg8; + __IO uint8_t tmpreg8 = 0; + + /* Adjust Timeout value in case of end of transfer */ + tmp_timeout = Timeout - (HAL_GetTick() - Tickstart); + tmp_tickstart = HAL_GetTick(); + + /* Initialize the 8bit temporary pointer */ + ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR; + + /* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */ + count = tmp_timeout * ((SystemCoreClock * 35U) >> 20U); + + while ((hspi->Instance->SR & Fifo) != State) + { + if ((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY)) + { + /* Flush Data Register by a blank read */ + tmpreg8 = *ptmpreg8; + /* To avoid GCC warning */ + UNUSED(tmpreg8); + } + + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tmp_tickstart) >= tmp_timeout) || (tmp_timeout == 0U)) + { + /* Disable the SPI and reset the CRC: the CRC value should be cleared + on both master and slave sides in order to resynchronize the master + and slave for their respective CRC calculation */ + + /* Disable TXE, RXNE and ERR interrupts for the interrupt process */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR)); + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Reset CRC Calculation */ + if (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) + { + SPI_RESET_CRC(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(hspi); + + return HAL_TIMEOUT; + } + /* If Systick is disabled or not incremented, deactivate timeout to go in disable loop procedure */ + if (count == 0U) + { + tmp_timeout = 0U; + } + count--; + } + } + + return HAL_OK; +} + +/** + * @brief Handle the check of the RX transaction complete. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Disable SPI peripheral */ + __HAL_SPI_DISABLE(hspi); + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + if ((hspi->Init.Mode == SPI_MODE_MASTER) && ((hspi->Init.Direction == SPI_DIRECTION_1LINE) + || (hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY))) + { + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @brief Handle the check of the RXTX or TX transaction complete. + * @param hspi SPI handle + * @param Timeout Timeout duration + * @param Tickstart tick start value + * @retval HAL status + */ +static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout, uint32_t Tickstart) +{ + /* Control if the TX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + /* Control if the RX fifo is empty */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout, Tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + return HAL_TIMEOUT; + } + + return HAL_OK; +} + +/** + * @brief Handle the end of the RXTX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Disable ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + hspi->State = HAL_SPI_STATE_READY; + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + if (hspi->State == HAL_SPI_STATE_BUSY_RX) + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user TxRx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxRxCpltCallback(hspi); +#else + HAL_SPI_TxRxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + } + else + { + hspi->State = HAL_SPI_STATE_READY; + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the RX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi) +{ + /* Disable RXNE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + hspi->State = HAL_SPI_STATE_READY; + +#if (USE_SPI_CRC != 0U) + /* Check if CRC error occurred */ + if (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC); + __HAL_SPI_CLEAR_CRCERRFLAG(hspi); + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { +#endif /* USE_SPI_CRC */ + if (hspi->ErrorCode == HAL_SPI_ERROR_NONE) + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->RxCpltCallback(hspi); +#else + HAL_SPI_RxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +#if (USE_SPI_CRC != 0U) + } +#endif /* USE_SPI_CRC */ +} + +/** + * @brief Handle the end of the TX transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi) +{ + uint32_t tickstart; + + /* Init tickstart for timeout management*/ + tickstart = HAL_GetTick(); + + /* Disable TXE and ERR interrupt */ + __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR)); + + /* Check the end of the transaction */ + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, tickstart) != HAL_OK) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_FLAG); + } + + /* Clear overrun flag in 2 Lines communication mode because received is not read */ + if (hspi->Init.Direction == SPI_DIRECTION_2LINES) + { + __HAL_SPI_CLEAR_OVRFLAG(hspi); + } + + hspi->State = HAL_SPI_STATE_READY; + if (hspi->ErrorCode != HAL_SPI_ERROR_NONE) + { + /* Call user error callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->ErrorCallback(hspi); +#else + HAL_SPI_ErrorCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } + else + { + /* Call user Rx complete callback */ +#if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U) + hspi->TxCpltCallback(hspi); +#else + HAL_SPI_TxCpltCallback(hspi); +#endif /* USE_HAL_SPI_REGISTER_CALLBACKS */ + } +} + +/** + * @brief Handle abort a Rx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @brief Handle abort a Tx or Rx/Tx transaction. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for SPI module. + * @retval None + */ +static void SPI_AbortTx_ISR(SPI_HandleTypeDef *hspi) +{ + __IO uint32_t count; + + count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U); + + /* Disable TXEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE)); + + /* Check TXEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_TXEIE)); + + if (SPI_EndRxTxTransaction(hspi, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Disable SPI Peripheral */ + __HAL_SPI_DISABLE(hspi); + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Check case of Full-Duplex Mode and disable directly RXNEIE interrupt */ + if (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)) + { + /* Disable RXNEIE interrupt */ + CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_RXNEIE)); + + /* Check RXNEIE is disabled */ + do + { + if (count == 0U) + { + SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_ABORT); + break; + } + count--; + } while (HAL_IS_BIT_SET(hspi->Instance->CR2, SPI_CR2_RXNEIE)); + + /* Control the BSY flag */ + if (SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + + /* Empty the FRLVL fifo */ + if (SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT, HAL_GetTick()) != HAL_OK) + { + hspi->ErrorCode = HAL_SPI_ERROR_ABORT; + } + } + hspi->State = HAL_SPI_STATE_ABORT; +} + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_spi_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_spi_ex.c new file mode 100644 index 0000000000..479bb8cfe0 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_spi_ex.c @@ -0,0 +1,112 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_spi_ex.c + * @author MCD Application Team + * @brief Extended SPI HAL module driver. + * This file provides firmware functions to manage the following + * SPI peripheral extended functionalities : + * + IO operation functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup SPIEx SPIEx + * @brief SPI Extended HAL module driver + * @{ + */ +#ifdef HAL_SPI_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SPIEx_Private_Constants SPIEx Private Constants + * @{ + */ +#define SPI_FIFO_SIZE 4UL +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup SPIEx_Exported_Functions SPIEx Exported Functions + * @{ + */ + +/** @defgroup SPIEx_Exported_Functions_Group1 IO operation functions + * @brief Data transfers functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of extended functions to manage the SPI + data transfers. + + (#) Rx data flush function: + (++) HAL_SPIEx_FlushRxFifo() + +@endverbatim + * @{ + */ + +/** + * @brief Flush the RX fifo. + * @param hspi pointer to a SPI_HandleTypeDef structure that contains + * the configuration information for the specified SPI module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(const SPI_HandleTypeDef *hspi) +{ + __IO uint32_t tmpreg; + uint8_t count = 0U; + while ((hspi->Instance->SR & SPI_FLAG_FRLVL) != SPI_FRLVL_EMPTY) + { + count++; + tmpreg = hspi->Instance->DR; + UNUSED(tmpreg); /* To avoid GCC warning */ + if (count == SPI_FIFO_SIZE) + { + return HAL_TIMEOUT; + } + } + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_SPI_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_tim.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_tim.c new file mode 100644 index 0000000000..6da4ad3dad --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_tim.c @@ -0,0 +1,7489 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_tim.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer (TIM) peripheral: + * + TIM Time Base Initialization + * + TIM Time Base Start + * + TIM Time Base Start Interruption + * + TIM Time Base Start DMA + * + TIM Output Compare/PWM Initialization + * + TIM Output Compare/PWM Channel Configuration + * + TIM Output Compare/PWM Start + * + TIM Output Compare/PWM Start Interruption + * + TIM Output Compare/PWM Start DMA + * + TIM Input Capture Initialization + * + TIM Input Capture Channel Configuration + * + TIM Input Capture Start + * + TIM Input Capture Start Interruption + * + TIM Input Capture Start DMA + * + TIM One Pulse Initialization + * + TIM One Pulse Channel Configuration + * + TIM One Pulse Start + * + TIM Encoder Interface Initialization + * + TIM Encoder Interface Start + * + TIM Encoder Interface Start Interruption + * + TIM Encoder Interface Start DMA + * + Commutation Event configuration with Interruption and DMA + * + TIM OCRef clear configuration + * + TIM External Clock configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Generic features ##### + ============================================================================== + [..] The Timer features include: + (#) 16-bit up, down, up/down auto-reload counter. + (#) 16-bit programmable prescaler allowing dividing (also on the fly) the + counter clock frequency either by any factor between 1 and 65536. + (#) Up to 4 independent channels for: + (++) Input Capture + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to interconnect + several timers together. + (#) Supports incremental encoder for positioning purposes + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + (++) Time Base : HAL_TIM_Base_MspInit() + (++) Input Capture : HAL_TIM_IC_MspInit() + (++) Output Compare : HAL_TIM_OC_MspInit() + (++) PWM generation : HAL_TIM_PWM_MspInit() + (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() + (++) Encoder mode output : HAL_TIM_Encoder_MspInit() + + (#) Initialize the TIM low level resources : + (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); + (##) TIM pins configuration + (+++) Enable the clock for the TIM GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE(); + (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); + + (#) The external Clock can be configured, if needed (the default clock is the + internal clock from the APBx), using the following function: + HAL_TIM_ConfigClockSource, the clock configuration should be done before + any start function. + + (#) Configure the TIM in the desired functioning mode using one of the + Initialization function of this driver: + (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base + (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an + Output Compare signal. + (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a + PWM signal. + (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an + external signal. + (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer + in One Pulse Mode. + (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. + + (#) Activate the TIM peripheral using one of the start functions depending from the feature used: + (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() + (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() + (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() + (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() + (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() + (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). + + (#) The DMA Burst is managed with the two following functions: + HAL_TIM_DMABurst_WriteStart() + HAL_TIM_DMABurst_ReadStart() + + *** Callback registration *** + ============================================= + + [..] + The compilation define USE_HAL_TIM_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_TIM_RegisterCallback() to register a callback. + HAL_TIM_RegisterCallback() takes as parameters the HAL peripheral handle, + the Callback ID and a pointer to the user callback function. + + [..] + Use function HAL_TIM_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_TIM_UnRegisterCallback takes as parameters the HAL peripheral handle, + and the Callback ID. + + [..] + These functions allow to register/unregister following callbacks: + (+) Base_MspInitCallback : TIM Base Msp Init Callback. + (+) Base_MspDeInitCallback : TIM Base Msp DeInit Callback. + (+) IC_MspInitCallback : TIM IC Msp Init Callback. + (+) IC_MspDeInitCallback : TIM IC Msp DeInit Callback. + (+) OC_MspInitCallback : TIM OC Msp Init Callback. + (+) OC_MspDeInitCallback : TIM OC Msp DeInit Callback. + (+) PWM_MspInitCallback : TIM PWM Msp Init Callback. + (+) PWM_MspDeInitCallback : TIM PWM Msp DeInit Callback. + (+) OnePulse_MspInitCallback : TIM One Pulse Msp Init Callback. + (+) OnePulse_MspDeInitCallback : TIM One Pulse Msp DeInit Callback. + (+) Encoder_MspInitCallback : TIM Encoder Msp Init Callback. + (+) Encoder_MspDeInitCallback : TIM Encoder Msp DeInit Callback. + (+) PeriodElapsedCallback : TIM Period Elapsed Callback. + (+) PeriodElapsedHalfCpltCallback : TIM Period Elapsed half complete Callback. + (+) TriggerCallback : TIM Trigger Callback. + (+) TriggerHalfCpltCallback : TIM Trigger half complete Callback. + (+) IC_CaptureCallback : TIM Input Capture Callback. + (+) IC_CaptureHalfCpltCallback : TIM Input Capture half complete Callback. + (+) OC_DelayElapsedCallback : TIM Output Compare Delay Elapsed Callback. + (+) PWM_PulseFinishedCallback : TIM PWM Pulse Finished Callback. + (+) PWM_PulseFinishedHalfCpltCallback : TIM PWM Pulse Finished half complete Callback. + (+) ErrorCallback : TIM Error Callback. + (+) CommutationCallback : TIM Commutation Callback. + (+) BreakCallback : TIM Break Callback. + + [..] +By default, after the Init and when the state is HAL_TIM_STATE_RESET +all interrupt callbacks are set to the corresponding weak functions: + examples HAL_TIM_TriggerCallback(), HAL_TIM_ErrorCallback(). + + [..] + Exception done for MspInit and MspDeInit functions that are reset to the legacy weak + functionalities in the Init / DeInit only when these callbacks are null + (not registered beforehand). If not, MspInit or MspDeInit are not null, the Init / DeInit + keep and use the user MspInit / MspDeInit callbacks(registered beforehand) + + [..] + Callbacks can be registered / unregistered in HAL_TIM_STATE_READY state only. + Exception done MspInit / MspDeInit that can be registered / unregistered + in HAL_TIM_STATE_READY or HAL_TIM_STATE_RESET state, + thus registered(user) MspInit / DeInit callbacks can be used during the Init / DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_TIM_RegisterCallback() before calling DeInit or Init function. + + [..] + When The compilation define USE_HAL_TIM_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available and all callbacks + are set to the corresponding weak functions. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup TIM TIM + * @brief TIM HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup TIM_Private_Functions + * @{ + */ +static void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure); +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config); +static void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter); +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource); +static void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma); +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig); +/** + * @} + */ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup TIM_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_Exported_Functions_Group1 TIM Time Base functions + * @brief Time Base functions + * +@verbatim + ============================================================================== + ##### Time Base functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM base. + (+) De-initialize the TIM base. + (+) Start the Time Base. + (+) Stop the Time Base. + (+) Start the Time Base and enable interrupt. + (+) Stop the Time Base and disable interrupt. + (+) Start the Time Base and enable DMA transfer. + (+) Stop the Time Base and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Time base Unit according to the specified + * parameters in the TIM_HandleTypeDef and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Base_DeInit() before HAL_TIM_Base_Init() + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Base_MspInitCallback == NULL) + { + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Base_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the Time Base configuration */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM Base peripheral + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Base_MspDeInitCallback == NULL) + { + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Base_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Base_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Base MSP. + * @param htim TIM Base handle + * @retval None + */ +__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Base_MspDeInit could be implemented in the user file + */ +} + + +/** + * @brief Starts the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Check the TIM state */ + if (htim->State != HAL_TIM_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Enable the TIM Update interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in interrupt mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + /* Disable the TIM Update interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, const uint32_t *pData, uint16_t Length) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Set the TIM state */ + if (htim->State == HAL_TIM_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->State == HAL_TIM_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + htim->State = HAL_TIM_STATE_BUSY; + } + } + else + { + return HAL_ERROR; + } + + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Update DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Base generation in DMA mode. + * @param htim TIM Base handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); + + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); + + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group2 TIM Output Compare functions + * @brief TIM Output Compare functions + * +@verbatim + ============================================================================== + ##### TIM Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Output Compare. + (+) De-initialize the TIM Output Compare. + (+) Start the TIM Output Compare. + (+) Stop the TIM Output Compare. + (+) Start the TIM Output Compare and enable interrupt. + (+) Stop the TIM Output Compare and disable interrupt. + (+) Start the TIM Output Compare and enable DMA transfer. + (+) Stop the TIM Output Compare and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Output Compare according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OC_DeInit() before HAL_TIM_OC_Init() + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OC_MspInitCallback == NULL) + { + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the Output Compare */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Output Compare handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OC_MspDeInitCallback == NULL) + { + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Output Compare MSP. + * @param htim TIM Output Compare handle + * @retval None + */ +__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Output compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group3 TIM PWM functions + * @brief TIM PWM functions + * +@verbatim + ============================================================================== + ##### TIM PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM PWM. + (+) De-initialize the TIM PWM. + (+) Start the TIM PWM. + (+) Stop the TIM PWM. + (+) Start the TIM PWM and enable interrupt. + (+) Stop the TIM PWM and disable interrupt. + (+) Start the TIM PWM and enable DMA transfer. + (+) Stop the TIM PWM and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM PWM Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_PWM_DeInit() before HAL_TIM_PWM_Init() + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->PWM_MspInitCallback == NULL) + { + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->PWM_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the PWM */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM PWM handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->PWM_MspDeInitCallback == NULL) + { + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + } + /* DeInit the low level hardware */ + htim->PWM_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_PWM_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM PWM MSP. + * @param htim TIM PWM handle + * @retval None + */ +__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the PWM signal generation. + * @param htim TIM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM channel state */ + if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Capture/Compare 3 request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode. + * @param htim TIM PWM handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group4 TIM Input Capture functions + * @brief TIM Input Capture functions + * +@verbatim + ============================================================================== + ##### TIM Input Capture functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Input Capture. + (+) De-initialize the TIM Input Capture. + (+) Start the TIM Input Capture. + (+) Stop the TIM Input Capture. + (+) Start the TIM Input Capture and enable interrupt. + (+) Stop the TIM Input Capture and disable interrupt. + (+) Start the TIM Input Capture and enable DMA transfer. + (+) Stop the TIM Input Capture and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Input Capture Time base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_IC_DeInit() before HAL_TIM_IC_Init() + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_PERIOD(htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->IC_MspInitCallback == NULL) + { + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->IC_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Init the base time for the input capture */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM peripheral + * @param htim TIM Input Capture handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->IC_MspDeInitCallback == NULL) + { + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + } + /* DeInit the low level hardware */ + htim->IC_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_IC_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Change the TIM channels state */ + TIM_CHANNEL_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET_ALL(htim, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Input Capture MSP. + * @param htim TIM Input Capture handle + * @retval None + */ +__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Input Capture MSP. + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Input Capture measurement. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM channel state */ + if ((channel_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Enable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in interrupt mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + HAL_TIM_ChannelStateTypeDef channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + HAL_TIM_ChannelStateTypeDef complementary_channel_state = TIM_CHANNEL_N_STATE_GET(htim, Channel); + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Set the TIM channel state */ + if ((channel_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + /* Enable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + case TIM_CHANNEL_4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); + break; + } + + default: + status = HAL_ERROR; + break; + } + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Input Capture measurement in DMA mode. + * @param htim TIM Input Capture handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channel */ + TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + case TIM_CHANNEL_4: + { + /* Disable the TIM Capture/Compare 4 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group5 TIM One Pulse functions + * @brief TIM One Pulse functions + * +@verbatim + ============================================================================== + ##### TIM One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM One Pulse. + (+) De-initialize the TIM One Pulse. + (+) Start the TIM One Pulse. + (+) Stop the TIM One Pulse. + (+) Start the TIM One Pulse and enable interrupt. + (+) Stop the TIM One Pulse and disable interrupt. + (+) Start the TIM One Pulse and enable DMA transfer. + (+) Stop the TIM One Pulse and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM One Pulse Time Base according to the specified + * parameters in the TIM_HandleTypeDef and initializes the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_OnePulse_DeInit() before HAL_TIM_OnePulse_Init() + * @note When the timer instance is initialized in One Pulse mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM One Pulse handle + * @param OnePulseMode Select the One pulse mode. + * This parameter can be one of the following values: + * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. + * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) +{ + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_OPM_MODE(OnePulseMode)); + assert_param(IS_TIM_PERIOD(htim->Init.Period)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->OnePulse_MspInitCallback == NULL) + { + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->OnePulse_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_OnePulse_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Configure the Time base in the One Pulse Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Reset the OPM Bit */ + htim->Instance->CR1 &= ~TIM_CR1_OPM; + + /* Configure the OPM Mode */ + htim->Instance->CR1 |= OnePulseMode; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Initialize the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + +/** + * @brief DeInitializes the TIM One Pulse + * @param htim TIM One Pulse handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->OnePulse_MspDeInitCallback == NULL) + { + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + } + /* DeInit the low level hardware */ + htim->OnePulse_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_OnePulse_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channel state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM One Pulse MSP. + * @param htim TIM One Pulse handle + * @retval None + */ +__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together + + No need to enable the counter, it's enabled automatically by hardware + (the counter starts in response to a stimulus and generate a pulse */ + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Enable the main output */ + __HAL_TIM_MOE_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode. + * @note Though OutputChannel parameter is deprecated and ignored by the function + * it has been kept to avoid HAL_TIM API compatibility break. + * @note The pulse output channel is determined when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel See note above + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(OutputChannel); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the Capture compare and the Input Capture channels + (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) + if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and + if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output + whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + if (IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) + { + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group6 TIM Encoder functions + * @brief TIM Encoder functions + * +@verbatim + ============================================================================== + ##### TIM Encoder functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the TIM Encoder. + (+) De-initialize the TIM Encoder. + (+) Start the TIM Encoder. + (+) Stop the TIM Encoder. + (+) Start the TIM Encoder and enable interrupt. + (+) Stop the TIM Encoder and disable interrupt. + (+) Start the TIM Encoder and enable DMA transfer. + (+) Stop the TIM Encoder and disable DMA transfer. + +@endverbatim + * @{ + */ +/** + * @brief Initializes the TIM Encoder Interface and initialize the associated handle. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * Ex: call @ref HAL_TIM_Encoder_DeInit() before HAL_TIM_Encoder_Init() + * @note Encoder mode and External clock mode 2 are not compatible and must not be selected together + * Ex: A call for @ref HAL_TIM_Encoder_Init will erase the settings of @ref HAL_TIM_ConfigClockSource + * using TIM_CLOCKSOURCE_ETRMODE2 and vice versa + * @note When the timer instance is initialized in Encoder mode, timer + * channels 1 and channel 2 are reserved and cannot be used for other + * purpose. + * @param htim TIM Encoder Interface handle + * @param sConfig TIM Encoder Interface configuration structure + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, const TIM_Encoder_InitTypeDef *sConfig) +{ + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the TIM handle allocation */ + if (htim == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); + assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); + assert_param(IS_TIM_AUTORELOAD_PRELOAD(htim->Init.AutoReloadPreload)); + assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); + assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC1Polarity)); + assert_param(IS_TIM_ENCODERINPUT_POLARITY(sConfig->IC2Polarity)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); + assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); + assert_param(IS_TIM_PERIOD(htim->Init.Period)); + + if (htim->State == HAL_TIM_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + htim->Lock = HAL_UNLOCKED; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + /* Reset interrupt callbacks to legacy weak callbacks */ + TIM_ResetCallback(htim); + + if (htim->Encoder_MspInitCallback == NULL) + { + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + } + /* Init the low level hardware : GPIO, CLOCK, NVIC */ + htim->Encoder_MspInitCallback(htim); +#else + /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ + HAL_TIM_Encoder_MspInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + + /* Set the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Reset the SMS and ECE bits */ + htim->Instance->SMCR &= ~(TIM_SMCR_SMS | TIM_SMCR_ECE); + + /* Configure the Time base in the Encoder Mode */ + TIM_Base_SetConfig(htim->Instance, &htim->Init); + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = htim->Instance->CCMR1; + + /* Get the TIMx CCER register value */ + tmpccer = htim->Instance->CCER; + + /* Set the encoder Mode */ + tmpsmcr |= sConfig->EncoderMode; + + /* Select the Capture Compare 1 and the Capture Compare 2 as input */ + tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); + tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8U)); + + /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ + tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); + tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); + tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8U); + tmpccmr1 |= (sConfig->IC1Filter << 4U) | (sConfig->IC2Filter << 12U); + + /* Set the TI1 and the TI2 Polarities */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); + tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); + tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4U); + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Write to TIMx CCMR1 */ + htim->Instance->CCMR1 = tmpccmr1; + + /* Write to TIMx CCER */ + htim->Instance->CCER = tmpccer; + + /* Initialize the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Initialize the TIM state*/ + htim->State = HAL_TIM_STATE_READY; + + return HAL_OK; +} + + +/** + * @brief DeInitializes the TIM Encoder interface + * @param htim TIM Encoder Interface handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Disable the TIM Peripheral Clock */ + __HAL_TIM_DISABLE(htim); + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + if (htim->Encoder_MspDeInitCallback == NULL) + { + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + } + /* DeInit the low level hardware */ + htim->Encoder_MspDeInitCallback(htim); +#else + /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ + HAL_TIM_Encoder_MspDeInit(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_RESET; + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_RESET); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_RESET); + + /* Change TIM state */ + htim->State = HAL_TIM_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Initializes the TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes TIM Encoder Interface MSP. + * @param htim TIM Encoder Interface handle + * @retval None + */ +__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_Encoder_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief Starts the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + break; + } + } + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + break; + } + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + + /* Enable the encoder interface channels */ + /* Enable the capture compare Interrupts 1 and/or 2 */ + switch (Channel) + { + case TIM_CHANNEL_1: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + default : + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + } + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in interrupt mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare Interrupts 1 and 2 */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @param pData1 The destination Buffer address for IC1. + * @param pData2 The destination Buffer address for IC2. + * @param Length The length of data to be transferred from TIM peripheral to memory. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, + uint32_t *pData2, uint16_t Length) +{ + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Set the TIM channel(s) state */ + if (Channel == TIM_CHANNEL_1) + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData1 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else if (Channel == TIM_CHANNEL_2) + { + if ((channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((pData2 == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + else + { + if ((channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_BUSY) + || (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_BUSY)) + { + return HAL_BUSY; + } + else if ((channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (channel_2_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_1_state == HAL_TIM_CHANNEL_STATE_READY) + && (complementary_channel_2_state == HAL_TIM_CHANNEL_STATE_READY)) + { + if ((((pData1 == NULL) || (pData2 == NULL))) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + + default: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + /* Enable the TIM Input Capture DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + + /* Enable the Capture compare channel */ + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); + + /* Enable the Peripheral */ + __HAL_TIM_ENABLE(htim); + + break; + } + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Encoder Interface in DMA mode. + * @param htim TIM Encoder Interface handle + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(htim->Instance)); + + /* Disable the Input Capture channels 1 and 2 + (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ + if (Channel == TIM_CHANNEL_1) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + } + else if (Channel == TIM_CHANNEL_2) + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + else + { + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); + TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); + + /* Disable the capture compare DMA Request 1 and 2 */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + } + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channel(s) state */ + if ((Channel == TIM_CHANNEL_1) || (Channel == TIM_CHANNEL_2)) + { + TIM_CHANNEL_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ +/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management + * @brief TIM IRQ handler management + * +@verbatim + ============================================================================== + ##### IRQ handler management ##### + ============================================================================== + [..] + This section provides Timer IRQ handler function. + +@endverbatim + * @{ + */ +/** + * @brief This function handles TIM interrupts requests. + * @param htim TIM handle + * @retval None + */ +void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) +{ + uint32_t itsource = htim->Instance->DIER; + uint32_t itflag = htim->Instance->SR; + + /* Capture compare 1 event */ + if ((itflag & (TIM_FLAG_CC1)) == (TIM_FLAG_CC1)) + { + if ((itsource & (TIM_IT_CC1)) == (TIM_IT_CC1)) + { + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC1); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + } + /* Capture compare 2 event */ + if ((itflag & (TIM_FLAG_CC2)) == (TIM_FLAG_CC2)) + { + if ((itsource & (TIM_IT_CC2)) == (TIM_IT_CC2)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC2); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + /* Input capture event */ + if ((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 3 event */ + if ((itflag & (TIM_FLAG_CC3)) == (TIM_FLAG_CC3)) + { + if ((itsource & (TIM_IT_CC3)) == (TIM_IT_CC3)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC3); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* Capture compare 4 event */ + if ((itflag & (TIM_FLAG_CC4)) == (TIM_FLAG_CC4)) + { + if ((itsource & (TIM_IT_CC4)) == (TIM_IT_CC4)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_CC4); + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + /* Input capture event */ + if ((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00U) + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + /* Output compare event */ + else + { +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->OC_DelayElapsedCallback(htim); + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_OC_DelayElapsedCallback(htim); + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; + } + } + /* TIM Update event */ + if ((itflag & (TIM_FLAG_UPDATE)) == (TIM_FLAG_UPDATE)) + { + if ((itsource & (TIM_IT_UPDATE)) == (TIM_IT_UPDATE)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_UPDATE); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Break input event */ + if ((itflag & (TIM_FLAG_BREAK)) == (TIM_FLAG_BREAK)) + { + if ((itsource & (TIM_IT_BREAK)) == (TIM_IT_BREAK)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_BREAK); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->BreakCallback(htim); +#else + HAL_TIMEx_BreakCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM Trigger detection event */ + if ((itflag & (TIM_FLAG_TRIGGER)) == (TIM_FLAG_TRIGGER)) + { + if ((itsource & (TIM_IT_TRIGGER)) == (TIM_IT_TRIGGER)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_TRIGGER); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } + /* TIM commutation event */ + if ((itflag & (TIM_FLAG_COM)) == (TIM_FLAG_COM)) + { + if ((itsource & (TIM_IT_COM)) == (TIM_IT_COM)) + { + __HAL_TIM_CLEAR_FLAG(htim, TIM_FLAG_COM); +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->CommutationCallback(htim); +#else + HAL_TIMEx_CommutCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + } + } +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions + * @brief TIM Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. + (+) Configure External Clock source. + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master and the Slave synchronization. + (+) Configure the DMA Burst Mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the TIM Output Compare Channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM Output Compare handle + * @param sConfig TIM Output Compare configuration structure + * @param Channel TIM Channels to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 1 in Output Compare */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 2 in Output Compare */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 3 in Output Compare */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the TIM Channel 4 in Output Compare */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + break; + } + + + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM Input Capture Channels according to the specified + * parameters in the TIM_IC_InitTypeDef. + * @param htim TIM IC handle + * @param sConfig TIM Input Capture configuration structure + * @param Channel TIM Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, const TIM_IC_InitTypeDef *sConfig, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); + assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); + assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); + assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); + + /* Process Locked */ + __HAL_LOCK(htim); + + if (Channel == TIM_CHANNEL_1) + { + /* TI1 Configuration */ + TIM_TI1_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Set the IC1PSC value */ + htim->Instance->CCMR1 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_2) + { + /* TI2 Configuration */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Set the IC2PSC value */ + htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8U); + } + else if (Channel == TIM_CHANNEL_3) + { + /* TI3 Configuration */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + TIM_TI3_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC3PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; + + /* Set the IC3PSC value */ + htim->Instance->CCMR2 |= sConfig->ICPrescaler; + } + else if (Channel == TIM_CHANNEL_4) + { + /* TI4 Configuration */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + TIM_TI4_SetConfig(htim->Instance, + sConfig->ICPolarity, + sConfig->ICSelection, + sConfig->ICFilter); + + /* Reset the IC4PSC Bits */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; + + /* Set the IC4PSC value */ + htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8U); + } + else + { + status = HAL_ERROR; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM PWM channels according to the specified + * parameters in the TIM_OC_InitTypeDef. + * @param htim TIM PWM handle + * @param sConfig TIM PWM configuration structure + * @param Channel TIM Channels to be configured + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, + const TIM_OC_InitTypeDef *sConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CHANNELS(Channel)); + assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); + assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); + assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); + + /* Process Locked */ + __HAL_LOCK(htim); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Configure the Channel 1 in PWM mode */ + TIM_OC1_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel1 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Configure the Channel 2 in PWM mode */ + TIM_OC2_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel2 */ + htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; + htim->Instance->CCMR1 |= sConfig->OCFastMode << 8U; + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Configure the Channel 3 in PWM mode */ + TIM_OC3_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel3 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode; + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Configure the Channel 4 in PWM mode */ + TIM_OC4_SetConfig(htim->Instance, sConfig); + + /* Set the Preload enable bit for channel4 */ + htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; + + /* Configure the Output Fast mode */ + htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; + htim->Instance->CCMR2 |= sConfig->OCFastMode << 8U; + break; + } + + + + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Initializes the TIM One Pulse Channels according to the specified + * parameters in the TIM_OnePulse_InitTypeDef. + * @param htim TIM One Pulse handle + * @param sConfig TIM One Pulse configuration structure + * @param OutputChannel TIM output channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @param InputChannel TIM input Channel to configure + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @note To output a waveform with a minimum delay user can enable the fast + * mode by calling the @ref __HAL_TIM_ENABLE_OCxFAST macro. Then CCx + * output is forced in response to the edge detection on TIx input, + * without taking in account the comparison. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, + uint32_t OutputChannel, uint32_t InputChannel) +{ + HAL_StatusTypeDef status = HAL_OK; + TIM_OC_InitTypeDef temp1; + + /* Check the parameters */ + assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); + assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); + + if (OutputChannel != InputChannel) + { + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Extract the Output compare configuration from sConfig structure */ + temp1.OCMode = sConfig->OCMode; + temp1.Pulse = sConfig->Pulse; + temp1.OCPolarity = sConfig->OCPolarity; + temp1.OCNPolarity = sConfig->OCNPolarity; + temp1.OCIdleState = sConfig->OCIdleState; + temp1.OCNIdleState = sConfig->OCNIdleState; + + switch (OutputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_OC1_SetConfig(htim->Instance, &temp1); + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_OC2_SetConfig(htim->Instance, &temp1); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (InputChannel) + { + case TIM_CHANNEL_1: + { + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC1PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI1FP1; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + case TIM_CHANNEL_2: + { + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, + sConfig->ICSelection, sConfig->ICFilter); + + /* Reset the IC2PSC Bits */ + htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; + + /* Select the Trigger source */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= TIM_TS_TI2FP2; + + /* Select the Slave Mode */ + htim->Instance->SMCR &= ~TIM_SMCR_SMS; + htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; + break; + } + + default: + status = HAL_ERROR; + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR + * @arg TIM_DMABASE_AF1 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiWriteStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer multiple Data from the memory to the TIM peripheral + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data write + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR + * @arg TIM_DMABASE_AF1 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, const uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, + (uint32_t)&htim->Instance->DMAR, DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM DMA Burst mode + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR + * @arg TIM_DMABASE_AF1 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @note This function should be used only when BurstLength is equal to DMA data transfer length. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength) +{ + HAL_StatusTypeDef status; + + status = HAL_TIM_DMABurst_MultiReadStart(htim, BurstBaseAddress, BurstRequestSrc, BurstBuffer, BurstLength, + ((BurstLength) >> 8U) + 1U); + + + return status; +} + +/** + * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory + * @param htim TIM handle + * @param BurstBaseAddress TIM Base address from where the DMA will start the Data read + * This parameter can be one of the following values: + * @arg TIM_DMABASE_CR1 + * @arg TIM_DMABASE_CR2 + * @arg TIM_DMABASE_SMCR + * @arg TIM_DMABASE_DIER + * @arg TIM_DMABASE_SR + * @arg TIM_DMABASE_EGR + * @arg TIM_DMABASE_CCMR1 + * @arg TIM_DMABASE_CCMR2 + * @arg TIM_DMABASE_CCER + * @arg TIM_DMABASE_CNT + * @arg TIM_DMABASE_PSC + * @arg TIM_DMABASE_ARR + * @arg TIM_DMABASE_RCR + * @arg TIM_DMABASE_CCR1 + * @arg TIM_DMABASE_CCR2 + * @arg TIM_DMABASE_CCR3 + * @arg TIM_DMABASE_CCR4 + * @arg TIM_DMABASE_BDTR + * @arg TIM_DMABASE_OR + * @arg TIM_DMABASE_AF1 + * @param BurstRequestSrc TIM DMA Request sources + * This parameter can be one of the following values: + * @arg TIM_DMA_UPDATE: TIM update Interrupt source + * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source + * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source + * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source + * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source + * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source + * @param BurstBuffer The Buffer address. + * @param BurstLength DMA Burst length. This parameter can be one value + * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. + * @param DataLength Data length. This parameter can be one value + * between 1 and 0xFFFF. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, + uint32_t BurstRequestSrc, uint32_t *BurstBuffer, + uint32_t BurstLength, uint32_t DataLength) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + assert_param(IS_TIM_DMA_LENGTH(BurstLength)); + assert_param(IS_TIM_DMA_DATA_LENGTH(DataLength)); + + if (htim->DMABurstState == HAL_DMA_BURST_STATE_BUSY) + { + return HAL_BUSY; + } + else if (htim->DMABurstState == HAL_DMA_BURST_STATE_READY) + { + if ((BurstBuffer == NULL) && (BurstLength > 0U)) + { + return HAL_ERROR; + } + else + { + htim->DMABurstState = HAL_DMA_BURST_STATE_BUSY; + } + } + else + { + /* nothing to do */ + } + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + /* Set the DMA Period elapsed callbacks */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; + htim->hdma[TIM_DMA_ID_UPDATE]->XferHalfCpltCallback = TIM_DMAPeriodElapsedHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC1: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC2: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC3: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_CC4: + { + /* Set the DMA capture callbacks */ + htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; + htim->hdma[TIM_DMA_ID_CC4]->XferHalfCpltCallback = TIM_DMACaptureHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + case TIM_DMA_TRIGGER: + { + /* Set the DMA trigger callbacks */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; + htim->hdma[TIM_DMA_ID_TRIGGER]->XferHalfCpltCallback = TIM_DMATriggerHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, + DataLength) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Configure the DMA Burst Mode */ + htim->Instance->DCR = (BurstBaseAddress | BurstLength); + + /* Enable the TIM DMA Request */ + __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); + } + + /* Return function status */ + return status; +} + +/** + * @brief Stop the DMA burst reading + * @param htim TIM handle + * @param BurstRequestSrc TIM DMA Request sources to disable. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); + + /* Abort the DMA transfer (at least disable the DMA channel) */ + switch (BurstRequestSrc) + { + case TIM_DMA_UPDATE: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_UPDATE]); + break; + } + case TIM_DMA_CC1: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + case TIM_DMA_CC2: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + case TIM_DMA_CC3: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + case TIM_DMA_CC4: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC4]); + break; + } + case TIM_DMA_TRIGGER: + { + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_TRIGGER]); + break; + } + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the TIM Update DMA request */ + __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); + + /* Change the DMA burst operation state */ + htim->DMABurstState = HAL_DMA_BURST_STATE_READY; + } + + /* Return function status */ + return status; +} + +/** + * @brief Generate a software event + * @param htim TIM handle + * @param EventSource specifies the event source. + * This parameter can be one of the following values: + * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source + * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source + * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source + * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source + * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source + * @arg TIM_EVENTSOURCE_COM: Timer COM event source + * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source + * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source + * @note Basic timers can only generate an update event. + * @note TIM_EVENTSOURCE_COM is relevant only with advanced timer instances. + * @note TIM_EVENTSOURCE_BREAK are relevant only for timer instances + * supporting a break input. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(htim->Instance)); + assert_param(IS_TIM_EVENT_SOURCE(EventSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Set the event sources */ + htim->Instance->EGR = EventSource; + + /* Change the TIM state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Configures the OCRef clear feature + * @param htim TIM handle + * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that + * contains the OCREF clear feature and parameters for the TIM peripheral. + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, + const TIM_ClearInputConfigTypeDef *sClearInputConfig, + uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + switch (sClearInputConfig->ClearInputSource) + { + case TIM_CLEARINPUTSOURCE_NONE: + { + /* Clear the OCREF clear selection bit and the the ETR Bits */ + CLEAR_BIT(htim->Instance->SMCR, (TIM_SMCR_OCCS | TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP)); + break; + } + case TIM_CLEARINPUTSOURCE_OCREFCLR: + { + /* Clear the OCREF clear selection bit */ + CLEAR_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + break; + } + + case TIM_CLEARINPUTSOURCE_ETR: + { + /* Check the parameters */ + assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); + assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); + assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); + + /* When OCRef clear feature is used with ETR source, ETR prescaler must be off */ + if (sClearInputConfig->ClearInputPrescaler != TIM_CLEARINPUTPRESCALER_DIV1) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + TIM_ETR_SetConfig(htim->Instance, + sClearInputConfig->ClearInputPrescaler, + sClearInputConfig->ClearInputPolarity, + sClearInputConfig->ClearInputFilter); + + /* Set the OCREF clear selection bit */ + SET_BIT(htim->Instance->SMCR, TIM_SMCR_OCCS); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + switch (Channel) + { + case TIM_CHANNEL_1: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 1 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + else + { + /* Disable the OCREF clear feature for Channel 1 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC1CE); + } + break; + } + case TIM_CHANNEL_2: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 2 */ + SET_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + else + { + /* Disable the OCREF clear feature for Channel 2 */ + CLEAR_BIT(htim->Instance->CCMR1, TIM_CCMR1_OC2CE); + } + break; + } + case TIM_CHANNEL_3: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 3 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + else + { + /* Disable the OCREF clear feature for Channel 3 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC3CE); + } + break; + } + case TIM_CHANNEL_4: + { + if (sClearInputConfig->ClearInputState != (uint32_t)DISABLE) + { + /* Enable the OCREF clear feature for Channel 4 */ + SET_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + else + { + /* Disable the OCREF clear feature for Channel 4 */ + CLEAR_BIT(htim->Instance->CCMR2, TIM_CCMR2_OC4CE); + } + break; + } + default: + break; + } + } + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the clock source to be used + * @param htim TIM handle + * @param sClockSourceConfig pointer to a TIM_ClockConfigTypeDef structure that + * contains the clock source information for the TIM peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, const TIM_ClockConfigTypeDef *sClockSourceConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Process Locked */ + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); + + /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + htim->Instance->SMCR = tmpsmcr; + + switch (sClockSourceConfig->ClockSource) + { + case TIM_CLOCKSOURCE_INTERNAL: + { + assert_param(IS_TIM_INSTANCE(htim->Instance)); + break; + } + + case TIM_CLOCKSOURCE_ETRMODE1: + { + /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + + /* Select the External clock mode1 and the ETRF trigger */ + tmpsmcr = htim->Instance->SMCR; + tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + break; + } + + case TIM_CLOCKSOURCE_ETRMODE2: + { + /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); + + /* Check ETR input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + /* Configure the ETR Clock source */ + TIM_ETR_SetConfig(htim->Instance, + sClockSourceConfig->ClockPrescaler, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + /* Enable the External clock mode2 */ + htim->Instance->SMCR |= TIM_SMCR_ECE; + break; + } + + case TIM_CLOCKSOURCE_TI1: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); + break; + } + + case TIM_CLOCKSOURCE_TI2: + { + /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI2 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI2_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); + break; + } + + case TIM_CLOCKSOURCE_TI1ED: + { + /* Check whether or not the timer instance supports external clock mode 1 */ + assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); + + /* Check TI1 input conditioning related parameters */ + assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); + assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); + + TIM_TI1_ConfigInputStage(htim->Instance, + sClockSourceConfig->ClockPolarity, + sClockSourceConfig->ClockFilter); + TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); + break; + } + + case TIM_CLOCKSOURCE_ITR0: + { + /* Check whether or not the timer instance supports internal trigger input */ + assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); + + TIM_ITRx_SetConfig(htim->Instance, sClockSourceConfig->ClockSource); + break; + } + + default: + status = HAL_ERROR; + break; + } + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Selects the signal connected to the TI1 input: direct from CH1_input + * or a XOR combination between CH1_input, CH2_input & CH3_input + * @param htim TIM handle. + * @param TI1_Selection Indicate whether or not channel 1 is connected to the + * output of a XOR gate. + * This parameter can be one of the following values: + * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input + * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 + * pins are connected to the TI1 input (XOR combination) + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) +{ + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Reset the TI1 selection */ + tmpcr2 &= ~TIM_CR2_TI1S; + + /* Set the TI1 selection */ + tmpcr2 |= TI1_Selection; + + /* Write to TIMxCR2 */ + htim->Instance->CR2 = tmpcr2; + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Disable Trigger Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in Slave mode in interrupt mode + * @param htim TIM handle. + * @param sSlaveConfig pointer to a TIM_SlaveConfigTypeDef structure that + * contains the selected trigger (internal trigger input, filtered + * timer input or external trigger input) and the Slave mode + * (Disable, Reset, Gated, Trigger, External clock mode 1). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + /* Check the parameters */ + assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); + assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); + assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); + + __HAL_LOCK(htim); + + htim->State = HAL_TIM_STATE_BUSY; + + if (TIM_SlaveTimer_SetConfig(htim, sSlaveConfig) != HAL_OK) + { + htim->State = HAL_TIM_STATE_READY; + __HAL_UNLOCK(htim); + return HAL_ERROR; + } + + /* Enable Trigger Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); + + /* Disable Trigger DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); + + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Read the captured value from Capture Compare unit + * @param htim TIM handle. + * @param Channel TIM Channels to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @arg TIM_CHANNEL_4: TIM Channel 4 selected + * @retval Captured value + */ +uint32_t HAL_TIM_ReadCapturedValue(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpreg = 0U; + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + + /* Return the capture 1 value */ + tmpreg = htim->Instance->CCR1; + + break; + } + case TIM_CHANNEL_2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + + /* Return the capture 2 value */ + tmpreg = htim->Instance->CCR2; + + break; + } + + case TIM_CHANNEL_3: + { + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); + + /* Return the capture 3 value */ + tmpreg = htim->Instance->CCR3; + + break; + } + + case TIM_CHANNEL_4: + { + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); + + /* Return the capture 4 value */ + tmpreg = htim->Instance->CCR4; + + break; + } + + default: + break; + } + + return tmpreg; +} + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions + * @brief TIM Callbacks functions + * +@verbatim + ============================================================================== + ##### TIM Callbacks functions ##### + ============================================================================== + [..] + This section provides TIM callback functions: + (+) TIM Period elapsed callback + (+) TIM Output Compare callback + (+) TIM Input capture callback + (+) TIM Trigger callback + (+) TIM Error callback + +@endverbatim + * @{ + */ + +/** + * @brief Period elapsed callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Period elapsed half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PeriodElapsedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Output Compare callback in non-blocking mode + * @param htim TIM OC handle + * @retval None + */ +__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureCallback could be implemented in the user file + */ +} + +/** + * @brief Input Capture half complete callback in non-blocking mode + * @param htim TIM IC handle + * @retval None + */ +__weak void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_IC_CaptureHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file + */ +} + +/** + * @brief PWM Pulse finished half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_PWM_PulseFinishedHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerCallback could be implemented in the user file + */ +} + +/** + * @brief Hall Trigger detection half complete callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_TriggerHalfCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Timer error callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIM_ErrorCallback could be implemented in the user file + */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User TIM callback to be used instead of the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @param pCallback pointer to the callback function + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, + pTIM_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + return HAL_ERROR; + } + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + htim->PeriodElapsedCallback = pCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + htim->PeriodElapsedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + htim->TriggerCallback = pCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + htim->TriggerHalfCpltCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + htim->IC_CaptureCallback = pCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + htim->IC_CaptureHalfCpltCallback = pCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + htim->OC_DelayElapsedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + htim->PWM_PulseFinishedCallback = pCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + htim->PWM_PulseFinishedHalfCpltCallback = pCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + htim->ErrorCallback = pCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + htim->CommutationCallback = pCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + htim->BreakCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + htim->Base_MspInitCallback = pCallback; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + htim->Base_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + htim->IC_MspInitCallback = pCallback; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + htim->IC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + htim->OC_MspInitCallback = pCallback; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + htim->OC_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + htim->PWM_MspInitCallback = pCallback; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + htim->PWM_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + htim->OnePulse_MspInitCallback = pCallback; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + htim->OnePulse_MspDeInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + htim->Encoder_MspInitCallback = pCallback; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + htim->Encoder_MspDeInitCallback = pCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister a TIM callback + * TIM callback is redirected to the weak predefined callback + * @param htim tim handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_TIM_BASE_MSPINIT_CB_ID Base MspInit Callback ID + * @arg @ref HAL_TIM_BASE_MSPDEINIT_CB_ID Base MspDeInit Callback ID + * @arg @ref HAL_TIM_IC_MSPINIT_CB_ID IC MspInit Callback ID + * @arg @ref HAL_TIM_IC_MSPDEINIT_CB_ID IC MspDeInit Callback ID + * @arg @ref HAL_TIM_OC_MSPINIT_CB_ID OC MspInit Callback ID + * @arg @ref HAL_TIM_OC_MSPDEINIT_CB_ID OC MspDeInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPINIT_CB_ID PWM MspInit Callback ID + * @arg @ref HAL_TIM_PWM_MSPDEINIT_CB_ID PWM MspDeInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPINIT_CB_ID One Pulse MspInit Callback ID + * @arg @ref HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID One Pulse MspDeInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPINIT_CB_ID Encoder MspInit Callback ID + * @arg @ref HAL_TIM_ENCODER_MSPDEINIT_CB_ID Encoder MspDeInit Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_CB_ID Period Elapsed Callback ID + * @arg @ref HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID Period Elapsed half complete Callback ID + * @arg @ref HAL_TIM_TRIGGER_CB_ID Trigger Callback ID + * @arg @ref HAL_TIM_TRIGGER_HALF_CB_ID Trigger half complete Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_CB_ID Input Capture Callback ID + * @arg @ref HAL_TIM_IC_CAPTURE_HALF_CB_ID Input Capture half complete Callback ID + * @arg @ref HAL_TIM_OC_DELAY_ELAPSED_CB_ID Output Compare Delay Elapsed Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_CB_ID PWM Pulse Finished Callback ID + * @arg @ref HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID PWM Pulse Finished half complete Callback ID + * @arg @ref HAL_TIM_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_TIM_COMMUTATION_CB_ID Commutation Callback ID + * @arg @ref HAL_TIM_BREAK_CB_ID Break Callback ID + * @retval status + */ +HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (htim->State == HAL_TIM_STATE_READY) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + case HAL_TIM_PERIOD_ELAPSED_CB_ID : + /* Legacy weak Period Elapsed Callback */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + break; + + case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID : + /* Legacy weak Period Elapsed half complete Callback */ + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + break; + + case HAL_TIM_TRIGGER_CB_ID : + /* Legacy weak Trigger Callback */ + htim->TriggerCallback = HAL_TIM_TriggerCallback; + break; + + case HAL_TIM_TRIGGER_HALF_CB_ID : + /* Legacy weak Trigger half complete Callback */ + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + break; + + case HAL_TIM_IC_CAPTURE_CB_ID : + /* Legacy weak IC Capture Callback */ + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + break; + + case HAL_TIM_IC_CAPTURE_HALF_CB_ID : + /* Legacy weak IC Capture half complete Callback */ + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + break; + + case HAL_TIM_OC_DELAY_ELAPSED_CB_ID : + /* Legacy weak OC Delay Elapsed Callback */ + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_CB_ID : + /* Legacy weak PWM Pulse Finished Callback */ + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + break; + + case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID : + /* Legacy weak PWM Pulse Finished half complete Callback */ + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + break; + + case HAL_TIM_ERROR_CB_ID : + /* Legacy weak Error Callback */ + htim->ErrorCallback = HAL_TIM_ErrorCallback; + break; + + case HAL_TIM_COMMUTATION_CB_ID : + /* Legacy weak Commutation Callback */ + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + break; + + case HAL_TIM_BREAK_CB_ID : + /* Legacy weak Break Callback */ + htim->BreakCallback = HAL_TIMEx_BreakCallback; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (htim->State == HAL_TIM_STATE_RESET) + { + switch (CallbackID) + { + case HAL_TIM_BASE_MSPINIT_CB_ID : + /* Legacy weak Base MspInit Callback */ + htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; + break; + + case HAL_TIM_BASE_MSPDEINIT_CB_ID : + /* Legacy weak Base Msp DeInit Callback */ + htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; + break; + + case HAL_TIM_IC_MSPINIT_CB_ID : + /* Legacy weak IC Msp Init Callback */ + htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; + break; + + case HAL_TIM_IC_MSPDEINIT_CB_ID : + /* Legacy weak IC Msp DeInit Callback */ + htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; + break; + + case HAL_TIM_OC_MSPINIT_CB_ID : + /* Legacy weak OC Msp Init Callback */ + htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; + break; + + case HAL_TIM_OC_MSPDEINIT_CB_ID : + /* Legacy weak OC Msp DeInit Callback */ + htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; + break; + + case HAL_TIM_PWM_MSPINIT_CB_ID : + /* Legacy weak PWM Msp Init Callback */ + htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; + break; + + case HAL_TIM_PWM_MSPDEINIT_CB_ID : + /* Legacy weak PWM Msp DeInit Callback */ + htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; + break; + + case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID : + /* Legacy weak One Pulse Msp Init Callback */ + htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; + break; + + case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID : + /* Legacy weak One Pulse Msp DeInit Callback */ + htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; + break; + + case HAL_TIM_ENCODER_MSPINIT_CB_ID : + /* Legacy weak Encoder Msp Init Callback */ + htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; + break; + + case HAL_TIM_ENCODER_MSPDEINIT_CB_ID : + /* Legacy weak Encoder Msp DeInit Callback */ + htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; + break; + + default : + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions + * @brief TIM Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the TIM Base handle state. + * @param htim TIM Base handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM OC handle state. + * @param htim TIM Output Compare handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM PWM handle state. + * @param htim TIM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Input Capture handle state. + * @param htim TIM IC handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM One Pulse Mode handle state. + * @param htim TIM OPM handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM Encoder Interface handle + * @retval HAL state + */ +HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(const TIM_HandleTypeDef *htim) +{ + return htim->State; +} + +/** + * @brief Return the TIM Encoder Mode handle state. + * @param htim TIM handle + * @retval Active channel + */ +HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(const TIM_HandleTypeDef *htim) +{ + return htim->Channel; +} + +/** + * @brief Return actual state of the TIM channel. + * @param htim TIM handle + * @param Channel TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 + * @arg TIM_CHANNEL_6: TIM Channel 6 + * @retval TIM Channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(const TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); + + channel_state = TIM_CHANNEL_STATE_GET(htim, Channel); + + return channel_state; +} + +/** + * @brief Return actual state of a DMA burst operation. + * @param htim TIM handle + * @retval DMA burst state + */ +HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(const TIM_HandleTypeDef *htim) +{ + /* Check the parameters */ + assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); + + return htim->DMABurstState; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup TIM_Private_Functions TIM Private Functions + * @{ + */ + +/** + * @brief TIM DMA error callback + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMAError(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Delay Pulse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedHalfCpltCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_4, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureCallback(htim); +#else + HAL_TIM_IC_CaptureCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Capture half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->IC_CaptureHalfCpltCallback(htim); +#else + HAL_TIM_IC_CaptureHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA Period Elapse complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_UPDATE]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedCallback(htim); +#else + HAL_TIM_PeriodElapsedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Period Elapse half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAPeriodElapsedHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PeriodElapsedHalfCpltCallback(htim); +#else + HAL_TIM_PeriodElapsedHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (htim->hdma[TIM_DMA_ID_TRIGGER]->Init.Mode == DMA_NORMAL) + { + htim->State = HAL_TIM_STATE_READY; + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerCallback(htim); +#else + HAL_TIM_TriggerCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief TIM DMA Trigger half complete callback. + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMATriggerHalfCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->TriggerHalfCpltCallback(htim); +#else + HAL_TIM_TriggerHalfCpltCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ +} + +/** + * @brief Time Base configuration + * @param TIMx TIM peripheral + * @param Structure TIM Base configuration structure + * @retval None + */ +static void TIM_Base_SetConfig(TIM_TypeDef *TIMx, const TIM_Base_InitTypeDef *Structure) +{ + uint32_t tmpcr1; + tmpcr1 = TIMx->CR1; + + /* Set TIM Time Base Unit parameters ---------------------------------------*/ + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); + tmpcr1 |= Structure->CounterMode; + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + tmpcr1 &= ~TIM_CR1_CKD; + tmpcr1 |= (uint32_t)Structure->ClockDivision; + } + + /* Set the auto-reload preload */ + MODIFY_REG(tmpcr1, TIM_CR1_ARPE, Structure->AutoReloadPreload); + + TIMx->CR1 = tmpcr1; + + /* Set the Autoreload value */ + TIMx->ARR = (uint32_t)Structure->Period ; + + /* Set the Prescaler value */ + TIMx->PSC = Structure->Prescaler; + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + TIMx->RCR = Structure->RepetitionCounter; + } + + /* Generate an update event to reload the Prescaler + and the repetition counter (only for advanced timer) value immediately */ + TIMx->EGR = TIM_EGR_UG; + + /* Check if the update flag is set after the Update Generation, if so clear the UIF flag */ + if (HAL_IS_BIT_SET(TIMx->SR, TIM_FLAG_UPDATE)) + { + /* Clear the update flag */ + CLEAR_BIT(TIMx->SR, TIM_FLAG_UPDATE); + } +} + +/** + * @brief Timer Output Compare 1 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= ~TIM_CCER_CC1E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare Mode Bits */ + tmpccmrx &= ~TIM_CCMR1_OC1M; + tmpccmrx &= ~TIM_CCMR1_CC1S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC1P; + /* Set the Output Compare Polarity */ + tmpccer |= OC_Config->OCPolarity; + + if (IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) + { + /* Check parameters */ + assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); + + /* Reset the Output N Polarity level */ + tmpccer &= ~TIM_CCER_CC1NP; + /* Set the Output N Polarity */ + tmpccer |= OC_Config->OCNPolarity; + /* Reset the Output N State */ + tmpccer &= ~TIM_CCER_CC1NE; + } + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + /* Check parameters */ + assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); + assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); + + /* Reset the Output Compare and Output Compare N IDLE State */ + tmpcr2 &= ~TIM_CR2_OIS1; + tmpcr2 &= ~TIM_CR2_OIS1N; + /* Set the Output Idle state */ + tmpcr2 |= OC_Config->OCIdleState; + /* Set the Output N Idle state */ + tmpcr2 |= OC_Config->OCNIdleState; + } + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR1 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 2 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC2E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR1 register value */ + tmpccmrx = TIMx->CCMR1; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR1_OC2M; + tmpccmrx &= ~TIM_CCMR1_CC2S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC2P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 4U); + + + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR1 */ + TIMx->CCMR1 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR2 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 3 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 3: Reset the CC2E Bit */ + TIMx->CCER &= ~TIM_CCER_CC3E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC3M; + tmpccmrx &= ~TIM_CCMR2_CC3S; + /* Select the Output Compare Mode */ + tmpccmrx |= OC_Config->OCMode; + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC3P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 8U); + + + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR3 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Timer Output Compare 4 configuration + * @param TIMx to select the TIM peripheral + * @param OC_Config The output configuration structure + * @retval None + */ +static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, const TIM_OC_InitTypeDef *OC_Config) +{ + uint32_t tmpccmrx; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Get the TIMx CCER register value */ + tmpccer = TIMx->CCER; + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= ~TIM_CCER_CC4E; + + /* Get the TIMx CR2 register value */ + tmpcr2 = TIMx->CR2; + + /* Get the TIMx CCMR2 register value */ + tmpccmrx = TIMx->CCMR2; + + /* Reset the Output Compare mode and Capture/Compare selection Bits */ + tmpccmrx &= ~TIM_CCMR2_OC4M; + tmpccmrx &= ~TIM_CCMR2_CC4S; + + /* Select the Output Compare Mode */ + tmpccmrx |= (OC_Config->OCMode << 8U); + + /* Reset the Output Polarity level */ + tmpccer &= ~TIM_CCER_CC4P; + /* Set the Output Compare Polarity */ + tmpccer |= (OC_Config->OCPolarity << 12U); + + + /* Write to TIMx CR2 */ + TIMx->CR2 = tmpcr2; + + /* Write to TIMx CCMR2 */ + TIMx->CCMR2 = tmpccmrx; + + /* Set the Capture Compare Register value */ + TIMx->CCR4 = OC_Config->Pulse; + + /* Write to TIMx CCER */ + TIMx->CCER = tmpccer; +} + +/** + * @brief Slave Timer configuration function + * @param htim TIM handle + * @param sSlaveConfig Slave timer configuration + * @retval None + */ +static HAL_StatusTypeDef TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, + const TIM_SlaveConfigTypeDef *sSlaveConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the Trigger Selection Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source */ + tmpsmcr |= sSlaveConfig->InputTrigger; + + /* Reset the slave mode Bits */ + tmpsmcr &= ~TIM_SMCR_SMS; + /* Set the slave mode */ + tmpsmcr |= sSlaveConfig->SlaveMode; + + /* Write to TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + + /* Configure the trigger prescaler, filter, and polarity */ + switch (sSlaveConfig->InputTrigger) + { + case TIM_TS_ETRF: + { + /* Check the parameters */ + assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + /* Configure the ETR Trigger source */ + TIM_ETR_SetConfig(htim->Instance, + sSlaveConfig->TriggerPrescaler, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI1F_ED: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + if (sSlaveConfig->SlaveMode == TIM_SLAVEMODE_GATED) + { + return HAL_ERROR; + } + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = htim->Instance->CCER; + htim->Instance->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = htim->Instance->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + htim->Instance->CCMR1 = tmpccmr1; + htim->Instance->CCER = tmpccer; + break; + } + + case TIM_TS_TI1FP1: + { + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI1 Filter and Polarity */ + TIM_TI1_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_TI2FP2: + { + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); + assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); + + /* Configure TI2 Filter and Polarity */ + TIM_TI2_ConfigInputStage(htim->Instance, + sSlaveConfig->TriggerPolarity, + sSlaveConfig->TriggerFilter); + break; + } + + case TIM_TS_ITR0: + { + /* Check the parameter */ + assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); + break; + } + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Configure the TI1 as Input. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 + * (on channel2 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Select the Input */ + if (IS_TIM_CC2_INSTANCE(TIMx) != RESET) + { + tmpccmr1 &= ~TIM_CCMR1_CC1S; + tmpccmr1 |= TIM_ICSelection; + } + else + { + tmpccmr1 |= TIM_CCMR1_CC1S_0; + } + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= ((TIM_ICFilter << 4U) & TIM_CCMR1_IC1F); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI1. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 1: Reset the CC1E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC1E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC1F; + tmpccmr1 |= (TIM_ICFilter << 4U); + + /* Select the Polarity and set the CC1E Bit */ + tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); + tmpccer |= TIM_ICPolarity; + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI2 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. + * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 + * (on channel1 path) is used as the input signal. Therefore CCMR1 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + + /* Select the Input */ + tmpccmr1 &= ~TIM_CCMR1_CC2S; + tmpccmr1 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= ((TIM_ICFilter << 12U) & TIM_CCMR1_IC2F); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= ((TIM_ICPolarity << 4U) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the Polarity and Filter for TI2. + * @param TIMx to select the TIM peripheral. + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + */ +static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Disable the Channel 2: Reset the CC2E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC2E; + tmpccmr1 = TIMx->CCMR1; + + /* Set the filter */ + tmpccmr1 &= ~TIM_CCMR1_IC2F; + tmpccmr1 |= (TIM_ICFilter << 12U); + + /* Select the Polarity and set the CC2E Bit */ + tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (TIM_ICPolarity << 4U); + + /* Write to TIMx CCMR1 and CCER registers */ + TIMx->CCMR1 = tmpccmr1 ; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI3 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @retval None + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + */ +static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 3: Reset the CC3E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC3E; + tmpccmr2 = TIMx->CCMR2; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC3S; + tmpccmr2 |= TIM_ICSelection; + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC3F; + tmpccmr2 |= ((TIM_ICFilter << 4U) & TIM_CCMR2_IC3F); + + /* Select the Polarity and set the CC3E Bit */ + tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); + tmpccer |= ((TIM_ICPolarity << 8U) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer; +} + +/** + * @brief Configure the TI4 as Input. + * @param TIMx to select the TIM peripheral + * @param TIM_ICPolarity The Input Polarity. + * This parameter can be one of the following values: + * @arg TIM_ICPOLARITY_RISING + * @arg TIM_ICPOLARITY_FALLING + * @arg TIM_ICPOLARITY_BOTHEDGE + * @param TIM_ICSelection specifies the input to be used. + * This parameter can be one of the following values: + * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. + * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. + * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. + * @param TIM_ICFilter Specifies the Input Capture Filter. + * This parameter must be a value between 0x00 and 0x0F. + * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 + * (on channel1 path) is used as the input signal. Therefore CCMR2 must be + * protected against un-initialized filter and polarity values. + * @retval None + */ +static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, + uint32_t TIM_ICFilter) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + + /* Disable the Channel 4: Reset the CC4E Bit */ + tmpccer = TIMx->CCER; + TIMx->CCER &= ~TIM_CCER_CC4E; + tmpccmr2 = TIMx->CCMR2; + + /* Select the Input */ + tmpccmr2 &= ~TIM_CCMR2_CC4S; + tmpccmr2 |= (TIM_ICSelection << 8U); + + /* Set the filter */ + tmpccmr2 &= ~TIM_CCMR2_IC4F; + tmpccmr2 |= ((TIM_ICFilter << 12U) & TIM_CCMR2_IC4F); + + /* Select the Polarity and set the CC4E Bit */ + tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); + tmpccer |= ((TIM_ICPolarity << 12U) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); + + /* Write to TIMx CCMR2 and CCER registers */ + TIMx->CCMR2 = tmpccmr2; + TIMx->CCER = tmpccer ; +} + +/** + * @brief Selects the Input Trigger source + * @param TIMx to select the TIM peripheral + * @param InputTriggerSource The Input Trigger source. + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal Trigger 0 + * @arg TIM_TS_ITR1: Internal Trigger 1 + * @arg TIM_TS_ITR2: Internal Trigger 2 + * @arg TIM_TS_ITR3: Internal Trigger 3 + * @arg TIM_TS_TI1F_ED: TI1 Edge Detector + * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 + * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 + * @arg TIM_TS_ETRF: External Trigger input + * @retval None + */ +static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint32_t InputTriggerSource) +{ + uint32_t tmpsmcr; + + /* Get the TIMx SMCR register value */ + tmpsmcr = TIMx->SMCR; + /* Reset the TS Bits */ + tmpsmcr &= ~TIM_SMCR_TS; + /* Set the Input Trigger source and the slave mode*/ + tmpsmcr |= (InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1); + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} +/** + * @brief Configures the TIMx External Trigger (ETR). + * @param TIMx to select the TIM peripheral + * @param TIM_ExtTRGPrescaler The external Trigger Prescaler. + * This parameter can be one of the following values: + * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. + * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. + * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. + * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. + * @param TIM_ExtTRGPolarity The external Trigger Polarity. + * This parameter can be one of the following values: + * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. + * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. + * @param ExtTRGFilter External Trigger Filter. + * This parameter must be a value between 0x00 and 0x0F + * @retval None + */ +static void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, + uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) +{ + uint32_t tmpsmcr; + + tmpsmcr = TIMx->SMCR; + + /* Reset the ETR Bits */ + tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); + + /* Set the Prescaler, the Filter value and the Polarity */ + tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8U))); + + /* Write to TIMx SMCR */ + TIMx->SMCR = tmpsmcr; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel x. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @arg TIM_CHANNEL_4: TIM Channel 4 + * @arg TIM_CHANNEL_5: TIM Channel 5 selected + * @arg TIM_CHANNEL_6: TIM Channel 6 selected + * @param ChannelState specifies the TIM Channel CCxE bit new state. + * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_DISABLE. + * @retval None + */ +void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState) +{ + uint32_t tmp; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_TIM_CHANNELS(Channel)); + + tmp = TIM_CCER_CC1E << (Channel & 0x1FU); /* 0x1FU = 31 bits max shift */ + + /* Reset the CCxE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxE Bit */ + TIMx->CCER |= (uint32_t)(ChannelState << (Channel & 0x1FU)); /* 0x1FU = 31 bits max shift */ +} + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) +/** + * @brief Reset interrupt callbacks to the legacy weak callbacks. + * @param htim pointer to a TIM_HandleTypeDef structure that contains + * the configuration information for TIM module. + * @retval None + */ +void TIM_ResetCallback(TIM_HandleTypeDef *htim) +{ + /* Reset the TIM callback to the legacy weak callbacks */ + htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; + htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; + htim->TriggerCallback = HAL_TIM_TriggerCallback; + htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; + htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; + htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; + htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; + htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; + htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; + htim->ErrorCallback = HAL_TIM_ErrorCallback; + htim->CommutationCallback = HAL_TIMEx_CommutCallback; + htim->BreakCallback = HAL_TIMEx_BreakCallback; +} +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_tim_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_tim_ex.c new file mode 100644 index 0000000000..4185f70e5a --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_tim_ex.c @@ -0,0 +1,1966 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_tim_ex.c + * @author MCD Application Team + * @brief TIM HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Timer Extended peripheral: + * + Time Complementary signal break and dead time configuration + * + Time Master and Slave synchronization configuration + * + Time Output Compare/PWM Channel Configuration (for channels 5 and 6) + * + Time OCRef clear configuration + * + Timer remapping capabilities configuration + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### TIMER Extended features ##### + ============================================================================== + [..] + The Timer Extended features include: + (#) Complementary outputs with programmable dead-time for : + (++) Output Compare + (++) PWM generation (Edge and Center-aligned Mode) + (++) One-pulse mode output + (#) Synchronization circuit to control the timer with external signals and to + interconnect several timers together. + (#) Break input to put the timer output signals in reset state or in a known state. + + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Initialize the TIM low level resources by implementing the following functions + depending on the selected feature: + + (#) Activate the TIM peripheral using one of the start functions: + (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), + HAL_TIMEx_OCN_Start_IT() + (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), + HAL_TIMEx_PWMN_Start_IT() + (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup TIMEx TIMEx + * @brief TIM Extended HAL module driver + * @{ + */ + +#ifdef HAL_TIM_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Constants TIM Extended Private Constants + * @{ + */ +/* Timeout for break input rearm */ +#define TIM_BREAKINPUT_REARM_TIMEOUT 5UL /* 5 milliseconds */ +/** + * @} + */ +/* End of private constants --------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup TIMEx_Private_Macros + * @{ + */ +#define TIM_GET_OR_MASK(__INSTANCE__) \ + (((__INSTANCE__) == TIM2) ? (TIM2_OR_TI4_RMP | TIM2_OR_ETR_RMP) : TIM16_OR_TI1_RMP) +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma); +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma); +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState); + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIMEx_Exported_Functions TIM Extended Exported Functions + * @{ + */ +/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions + * @brief Timer Complementary Output Compare functions + * +@verbatim + ============================================================================== + ##### Timer Complementary Output Compare functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary Output Compare/PWM. + (+) Stop the Complementary Output Compare/PWM. + (+) Start the Complementary Output Compare/PWM and enable interrupts. + (+) Stop the Complementary Output Compare/PWM and disable interrupts. + (+) Start the Complementary Output Compare/PWM and enable DMA transfers. + (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM Output Compare signal generation on the complementary + * output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM OC handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Output Compare interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in interrupt mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Output Compare DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM Output Compare signal generation in DMA mode + * on the complementary output. + * @param htim TIM Output Compare handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Output Compare DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the Capture compare channel N */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions + * @brief Timer Complementary PWM functions + * +@verbatim + ============================================================================== + ##### Timer Complementary PWM functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary PWM. + (+) Stop the Complementary PWM. + (+) Start the Complementary PWM and enable interrupts. + (+) Stop the Complementary PWM and disable interrupts. + (+) Start the Complementary PWM and enable DMA transfers. + (+) Stop the Complementary PWM and disable DMA transfers. +@endverbatim + * @{ + */ + +/** + * @brief Starts the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the PWM signal generation on the complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Check the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) != HAL_TIM_CHANNEL_STATE_READY) + { + return HAL_ERROR; + } + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Enable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the TIM Break interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); + + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the PWM signal generation in interrupt mode on the + * complementary output. + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the TIM Break interrupt (only if no more channel is active) */ + tmpccer = htim->Instance->CCER; + if ((tmpccer & TIM_CCER_CCxNE_MASK) == (uint32_t)RESET) + { + __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); + } + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @brief Starts the TIM PWM signal generation in DMA mode on the + * complementary output + * @param htim TIM handle + * @param Channel TIM Channel to be enabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, const uint32_t *pData, + uint16_t Length) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + /* Set the TIM complementary channel state */ + if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_BUSY) + { + return HAL_BUSY; + } + else if (TIM_CHANNEL_N_STATE_GET(htim, Channel) == HAL_TIM_CHANNEL_STATE_READY) + { + if ((pData == NULL) || (Length == 0U)) + { + return HAL_ERROR; + } + else + { + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_BUSY); + } + } + else + { + return HAL_ERROR; + } + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC1]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); + break; + } + + case TIM_CHANNEL_2: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC2]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); + break; + } + + case TIM_CHANNEL_3: + { + /* Set the DMA compare callbacks */ + htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseNCplt; + htim->hdma[TIM_DMA_ID_CC3]->XferHalfCpltCallback = TIM_DMADelayPulseHalfCplt; + + /* Set the DMA error callback */ + htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, + Length) != HAL_OK) + { + /* Return error status */ + return HAL_ERROR; + } + /* Enable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Enable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */ + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS; + if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr)) + { + __HAL_TIM_ENABLE(htim); + } + } + else + { + __HAL_TIM_ENABLE(htim); + } + } + + /* Return function status */ + return status; +} + +/** + * @brief Stops the TIM PWM signal generation in DMA mode on the complementary + * output + * @param htim TIM handle + * @param Channel TIM Channel to be disabled + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @arg TIM_CHANNEL_3: TIM Channel 3 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); + + switch (Channel) + { + case TIM_CHANNEL_1: + { + /* Disable the TIM Capture/Compare 1 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC1]); + break; + } + + case TIM_CHANNEL_2: + { + /* Disable the TIM Capture/Compare 2 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC2]); + break; + } + + case TIM_CHANNEL_3: + { + /* Disable the TIM Capture/Compare 3 DMA request */ + __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); + (void)HAL_DMA_Abort_IT(htim->hdma[TIM_DMA_ID_CC3]); + break; + } + + default: + status = HAL_ERROR; + break; + } + + if (status == HAL_OK) + { + /* Disable the complementary PWM output */ + TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM complementary channel state */ + TIM_CHANNEL_N_STATE_SET(htim, Channel, HAL_TIM_CHANNEL_STATE_READY); + } + + /* Return function status */ + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions + * @brief Timer Complementary One Pulse functions + * +@verbatim + ============================================================================== + ##### Timer Complementary One Pulse functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Start the Complementary One Pulse generation. + (+) Stop the Complementary One Pulse. + (+) Start the Complementary One Pulse and enable interrupts. + (+) Stop the Complementary One Pulse and disable interrupts. + +@endverbatim + * @{ + */ + +/** + * @brief Starts the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation on the complementary + * output. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Starts the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to enable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2); + HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1); + HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2); + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Check the TIM channels state */ + if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY) + || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY)) + { + return HAL_ERROR; + } + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY); + + /* Enable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); + + /* Enable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); + + /* Enable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_ENABLE); + + /* Enable the Main Output */ + __HAL_TIM_MOE_ENABLE(htim); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Stops the TIM One Pulse signal generation in interrupt mode on the + * complementary channel. + * @note OutputChannel must match the pulse output channel chosen when calling + * @ref HAL_TIM_OnePulse_ConfigChannel(). + * @param htim TIM One Pulse handle + * @param OutputChannel pulse output channel to disable + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 selected + * @arg TIM_CHANNEL_2: TIM Channel 2 selected + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) +{ + uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); + + /* Disable the TIM Capture/Compare 1 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); + + /* Disable the TIM Capture/Compare 2 interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); + + /* Disable the complementary One Pulse output channel and the Input Capture channel */ + TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); + TIM_CCxChannelCmd(htim->Instance, input_channel, TIM_CCx_DISABLE); + + /* Disable the Main Output */ + __HAL_TIM_MOE_DISABLE(htim); + + /* Disable the Peripheral */ + __HAL_TIM_DISABLE(htim); + + /* Set the TIM channels state */ + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions + * @brief Peripheral Control functions + * +@verbatim + ============================================================================== + ##### Peripheral Control functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Configure the commutation event in case of use of the Hall sensor interface. + (+) Configure Output channels for OC and PWM mode. + + (+) Configure Complementary channels, break features and dead time. + (+) Configure Master synchronization. + (+) Configure timer remapping capabilities. + (+) Enable or disable channel grouping. + +@endverbatim + * @{ + */ + +/** + * @brief Configure the TIM commutation event sequence. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if (InputTrigger == TIM_TS_ITR0) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Disable Commutation Interrupt */ + __HAL_TIM_DISABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configure the TIM commutation event sequence with interrupt. + * @note This function is mandatory to use the commutation event in order to + * update the configuration at each commutation detection on the TRGI input of the Timer, + * the typical use of this feature is with the use of another Timer(interface Timer) + * configured in Hall sensor interface, this interface Timer will generate the + * commutation at its TRGO output (connected to Timer used in this function) each time + * the TI1 of the Interface Timer detect a commutation at its input TI1. + * @param htim TIM handle + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor + * This parameter can be one of the following values: + * @arg TIM_TS_ITR0: Internal trigger 0 selected + * @param CommutationSource the Commutation Event source + * This parameter can be one of the following values: + * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer + * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, + uint32_t CommutationSource) +{ + /* Check the parameters */ + assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); + assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); + + __HAL_LOCK(htim); + + if (InputTrigger == TIM_TS_ITR0) + { + /* Select the Input trigger */ + htim->Instance->SMCR &= ~TIM_SMCR_TS; + htim->Instance->SMCR |= InputTrigger; + } + + /* Select the Capture Compare preload feature */ + htim->Instance->CR2 |= TIM_CR2_CCPC; + /* Select the Commutation event source */ + htim->Instance->CR2 &= ~TIM_CR2_CCUS; + htim->Instance->CR2 |= CommutationSource; + + /* Enable the Commutation Interrupt */ + __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the TIM in master mode. + * @param htim TIM handle. + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that + * contains the selected trigger output (TRGO) and the Master/Slave + * mode. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, + const TIM_MasterConfigTypeDef *sMasterConfig) +{ + uint32_t tmpcr2; + uint32_t tmpsmcr; + + /* Check the parameters */ + assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); + assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); + assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Change the handler state */ + htim->State = HAL_TIM_STATE_BUSY; + + /* Get the TIMx CR2 register value */ + tmpcr2 = htim->Instance->CR2; + + /* Get the TIMx SMCR register value */ + tmpsmcr = htim->Instance->SMCR; + + /* Reset the MMS Bits */ + tmpcr2 &= ~TIM_CR2_MMS; + /* Select the TRGO source */ + tmpcr2 |= sMasterConfig->MasterOutputTrigger; + + /* Update TIMx CR2 */ + htim->Instance->CR2 = tmpcr2; + + if (IS_TIM_SLAVE_INSTANCE(htim->Instance)) + { + /* Reset the MSM Bit */ + tmpsmcr &= ~TIM_SMCR_MSM; + /* Set master mode */ + tmpsmcr |= sMasterConfig->MasterSlaveMode; + + /* Update TIMx SMCR */ + htim->Instance->SMCR = tmpsmcr; + } + + /* Change the htim state */ + htim->State = HAL_TIM_STATE_READY; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State + * and the AOE(automatic output enable). + * @param htim TIM handle + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that + * contains the BDTR Register configuration information for the TIM peripheral. + * @note Interrupts can be generated when an active level is detected on the + * break input, the break 2 input or the system break input. Break + * interrupt can be enabled by calling the @ref __HAL_TIM_ENABLE_IT macro. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, + const TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) +{ + /* Keep this variable initialized to 0 as it is used to configure BDTR register */ + uint32_t tmpbdtr = 0U; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); + assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); + assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); + assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); + assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); + assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); + assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); + assert_param(IS_TIM_BREAK_AFMODE(sBreakDeadTimeConfig->BreakAFMode)); + + /* Check input state */ + __HAL_LOCK(htim); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, sBreakDeadTimeConfig->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, sBreakDeadTimeConfig->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, sBreakDeadTimeConfig->OffStateIDLEMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, sBreakDeadTimeConfig->OffStateRunMode); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, sBreakDeadTimeConfig->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, sBreakDeadTimeConfig->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, sBreakDeadTimeConfig->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, sBreakDeadTimeConfig->BreakAFMode); + + + /* Set TIMx_BDTR */ + htim->Instance->BDTR = tmpbdtr; + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Configures the break input source. + * @param htim TIM handle. + * @param BreakInput Break input to configure + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @param sBreakInputConfig Break input source configuration + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ConfigBreakInput(TIM_HandleTypeDef *htim, + uint32_t BreakInput, + const TIMEx_BreakInputConfigTypeDef *sBreakInputConfig) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmporx; + uint32_t bkin_enable_mask; + uint32_t bkin_polarity_mask; + uint32_t bkin_enable_bitpos; + uint32_t bkin_polarity_bitpos; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + assert_param(IS_TIM_BREAKINPUTSOURCE(sBreakInputConfig->Source)); + assert_param(IS_TIM_BREAKINPUTSOURCE_STATE(sBreakInputConfig->Enable)); + assert_param(IS_TIM_BREAKINPUTSOURCE_POLARITY(sBreakInputConfig->Polarity)); + + /* Check input state */ + __HAL_LOCK(htim); + + switch (sBreakInputConfig->Source) + { + case TIM_BREAKINPUTSOURCE_BKIN: + { + bkin_enable_mask = TIM_AF1_BKINE; + bkin_enable_bitpos = TIM_AF1_BKINE_Pos; + bkin_polarity_mask = TIM_AF1_BKINP; + bkin_polarity_bitpos = TIM_AF1_BKINP_Pos; + break; + } + case TIM_BREAKINPUTSOURCE_COMP1: + { + bkin_enable_mask = TIM_AF1_BKCMP1E; + bkin_enable_bitpos = TIM_AF1_BKCMP1E_Pos; + bkin_polarity_mask = TIM_AF1_BKCMP1P; + bkin_polarity_bitpos = TIM_AF1_BKCMP1P_Pos; + break; + } + + default: + { + bkin_enable_mask = 0U; + bkin_polarity_mask = 0U; + bkin_enable_bitpos = 0U; + bkin_polarity_bitpos = 0U; + break; + } + } + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Get the TIMx_AF1 register value */ + tmporx = htim->Instance->AF1; + + /* Enable the break input */ + tmporx &= ~bkin_enable_mask; + tmporx |= (sBreakInputConfig->Enable << bkin_enable_bitpos) & bkin_enable_mask; + + /* Set the break input polarity */ + tmporx &= ~bkin_polarity_mask; + tmporx |= (sBreakInputConfig->Polarity << bkin_polarity_bitpos) & bkin_polarity_mask; + + /* Set TIMx_AF1 */ + htim->Instance->AF1 = tmporx; + break; + } + default: + status = HAL_ERROR; + break; + } + + __HAL_UNLOCK(htim); + + return status; +} + +/** + * @brief Configures the TIMx Remapping input capabilities. + * @param htim TIM handle. + * @param Remap specifies the TIM remapping source. + * For TIM2, the parameter is a combination of 2 fields (field1 | field2): + * + * field1 can have the following values: + * @arg TIM_TIM2_ETR_GPIO: TIM2_ETR is connected to I/O + * @arg TIM_TIM2_ETR_ADC_ADW: TIM2_ETR is connected to ADC analog watchdog + * @arg TIM_TIM2_ETR_COMP1: TIM2 ETR is connected to COMP1 output + * + * field2 can have the following values: + * @arg TIM_TIM2_TI4_GPIO: TIM2 TI4 is connected to I/O + * @arg TIM_TIM2_TI4_COMP1: TIM2 TI4 is connected to COMP1 output + * + * For TIM16, the parameter can have the following values: + * @arg TIM_TIM16_TI1_GPIO: TIM16 TI1 is connected to I/O + * @arg TIM_TIM16_TI1_LCO: TIM16 TI1 is connected to LCO + * @arg TIM_TIM16_TI1_COMP1: TIM16 TI1 is connected to COMP1 output + * @arg TIM_TIM16_TI1_MCO: TIM16 TI1 is connected to MCO + + * + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap) +{ + uint32_t tmpor; + uint32_t tmpaf1; + + /* Check parameters */ + assert_param(IS_TIM_REMAP(htim->Instance, Remap)); + + __HAL_LOCK(htim); + + /* Read TIMx_OR */ + tmpor = READ_REG(htim->Instance->OR); + + /* Read TIMx_AF1 */ + tmpaf1 = READ_REG(htim->Instance->AF1); + + /* Set ETR_SEL bit field (if required) */ + if (IS_TIM_ETRSEL_INSTANCE(htim->Instance)) + { + if ((Remap & TIM_AF1_ETRSEL) != (uint32_t)RESET) + { + /* COMP1 output or COMP2 output connected to ETR input */ + MODIFY_REG(tmpaf1, TIM_AF1_ETRSEL, (Remap & TIM_AF1_ETRSEL)); + } + else + { + /* ETR legacy mode */ + MODIFY_REG(tmpaf1, TIM_AF1_ETRSEL, 0U); + } + + /* Set TIMx_AF1 */ + WRITE_REG(htim->Instance->AF1, tmpaf1); + } + + /* Set other remapping capabilities */ + MODIFY_REG(tmpor, TIM_GET_OR_MASK(htim->Instance), (Remap & (~TIM_AF1_ETRSEL))); + + /* Set TIMx_OR */ + WRITE_REG(htim->Instance->OR, tmpor); + + __HAL_UNLOCK(htim); + + return HAL_OK; +} + +/** + * @brief Disarm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to disarm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note The break input can be disarmed only when it is configured in + * bidirectional mode and when when MOE is reset. + * @note Purpose is to be able to have the input voltage back to high-state, + * whatever the time constant on the output . + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_DisarmBreakInput(TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tmpbdtr; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + tmpbdtr = READ_REG(htim->Instance->BDTR); + if ((READ_BIT(tmpbdtr, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) && + (READ_BIT(tmpbdtr, TIM_BDTR_MOE) == 0U)) + { + /* Break input BRK is disarmed */ + SET_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM); + } + break; + } + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @brief Arm the designated break input (when it operates in bidirectional mode). + * @param htim TIM handle. + * @param BreakInput Break input to arm + * This parameter can be one of the following values: + * @arg TIM_BREAKINPUT_BRK: Timer break input + * @arg TIM_BREAKINPUT_BRK2: Timer break 2 input + * @note Arming is possible at anytime, even if fault is present. + * @note Break input is automatically armed as soon as MOE bit is set. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_TIMEx_ReArmBreakInput(const TIM_HandleTypeDef *htim, uint32_t BreakInput) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); + assert_param(IS_TIM_BREAKINPUT(BreakInput)); + + switch (BreakInput) + { + case TIM_BREAKINPUT_BRK: + { + /* Check initial conditions */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKBID) == TIM_BDTR_BKBID) + { + /* Break input BRK is re-armed automatically by hardware. Poll to check whether fault condition disappeared */ + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT) + { + /* New check to avoid false timeout detection in case of preemption */ + if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL) + { + return HAL_TIMEOUT; + } + } + } + } + break; + } + + default: + status = HAL_ERROR; + break; + } + + return status; +} + +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions + * @brief Extended Callbacks functions + * +@verbatim + ============================================================================== + ##### Extended Callbacks functions ##### + ============================================================================== + [..] + This section provides Extended TIM callback functions: + (+) Timer Commutation callback + (+) Timer Break callback + +@endverbatim + * @{ + */ + +/** + * @brief Commutation callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_CommutCallback could be implemented in the user file + */ +} + +/** + * @brief Break detection callback in non-blocking mode + * @param htim TIM handle + * @retval None + */ +__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(htim); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_TIMEx_BreakCallback could be implemented in the user file + */ +} +/** + * @} + */ + +/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions + * @brief Extended Peripheral State functions + * +@verbatim + ============================================================================== + ##### Extended Peripheral State functions ##### + ============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return actual state of the TIM complementary channel. + * @param htim TIM handle + * @param ChannelN TIM Complementary channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @retval TIM Complementary channel state + */ +HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(const TIM_HandleTypeDef *htim, uint32_t ChannelN) +{ + HAL_TIM_ChannelStateTypeDef channel_state; + + /* Check the parameters */ + assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, ChannelN)); + + channel_state = TIM_CHANNEL_N_STATE_GET(htim, ChannelN); + + return channel_state; +} +/** + * @} + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup TIMEx_Private_Functions TIM Extended Private Functions + * @{ + */ + +/** + * @brief TIM DMA Delay Pulse complete callback (complementary channel). + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMADelayPulseNCplt(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + + if (hdma->Init.Mode == DMA_NORMAL) + { + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->PWM_PulseFinishedCallback(htim); +#else + HAL_TIM_PWM_PulseFinishedCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief TIM DMA error callback (complementary channel) + * @param hdma pointer to DMA handle. + * @retval None + */ +static void TIM_DMAErrorCCxN(DMA_HandleTypeDef *hdma) +{ + TIM_HandleTypeDef *htim = (TIM_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + if (hdma == htim->hdma[TIM_DMA_ID_CC1]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY); + } + else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) + { + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; + TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_3, HAL_TIM_CHANNEL_STATE_READY); + } + else + { + /* nothing to do */ + } + +#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) + htim->ErrorCallback(htim); +#else + HAL_TIM_ErrorCallback(htim); +#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ + + htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; +} + +/** + * @brief Enables or disables the TIM Capture Compare Channel xN. + * @param TIMx to select the TIM peripheral + * @param Channel specifies the TIM Channel + * This parameter can be one of the following values: + * @arg TIM_CHANNEL_1: TIM Channel 1 + * @arg TIM_CHANNEL_2: TIM Channel 2 + * @arg TIM_CHANNEL_3: TIM Channel 3 + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. + * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. + * @retval None + */ +static void TIM_CCxNChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelNState) +{ + uint32_t tmp; + + tmp = TIM_CCER_CC1NE << (Channel & 0xFU); /* 0xFU = 15 bits max shift */ + + /* Reset the CCxNE Bit */ + TIMx->CCER &= ~tmp; + + /* Set or reset the CCxNE Bit */ + TIMx->CCER |= (uint32_t)(ChannelNState << (Channel & 0xFU)); /* 0xFU = 15 bits max shift */ +} +/** + * @} + */ + +#endif /* HAL_TIM_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_timebase_rtc_alarm_template.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_timebase_rtc_alarm_template.c new file mode 100644 index 0000000000..b747f1c3bc --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_timebase_rtc_alarm_template.c @@ -0,0 +1,270 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_timebase_rtc_alarm_template.c + * @author MCD Application Team + * @brief HAL time base based on the hardware RTC_ALARM Template. + * + * This file override the native HAL time base functions (defined as weak) + * to use the RTC ALARM for time base generation: + * + Initializes the RTC peripheral to increment the seconds registers each 1ms + * + The alarm is configured to assert an interrupt when the RTC reaches 1ms + * + HAL_IncTick is called at each Alarm event and the time is reset to 00:00:00 + * + HSE (default), LSE or LSI can be selected as RTC clock source + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32wl3x_hal_timebase_rtc_alarm.c' + (#) Add this file and the RTC HAL drivers to your project and uncomment + HAL_RTC_MODULE_ENABLED define in stm32wl3x_hal_conf.h + + [..] + (@) HAL RTC alarm and HAL RTC wakeup drivers can't be used with low power modes: + The wake up capability of the RTC may be intrusive in case of prior low power mode + configuration requiring different wake up sources. + Application/Example behavior is no more guaranteed + (@) The stm32wl3x_hal_timebase_tim use is recommended for the Applications/Examples + requiring low power modes + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup HAL_TimeBase_RTC_Alarm_Template HAL TimeBase RTC Alarm Template + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Uncomment the line below to select the appropriate RTC Clock source for your application: + + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing + precision. + + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing + precision. + */ +#define RTC_CLOCK_SOURCE_LSE +/* #define RTC_CLOCK_SOURCE_LSI */ + +#define RTC_ASYNCH_PREDIV 0U +#define RTC_SYNCH_PREDIV 31U + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +extern RTC_HandleTypeDef hRTC_Handle; +RTC_HandleTypeDef hRTC_Handle; + +/* Private function prototypes -----------------------------------------------*/ +void RTC_IRQHandler(void); +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the RTC_ALARM A as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + __IO uint32_t counter = 0U; + + RCC_OscInitTypeDef RCC_OscInitStruct; + +#ifdef RTC_CLOCK_SOURCE_LSE + /* Configure LSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; +#elif defined (RTC_CLOCK_SOURCE_LSI) + /* Configure LSI as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI1; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; +#else +#error Please select the RTC Clock source +#endif /* RTC_CLOCK_SOURCE_LSE */ + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) + { + /* Enable RTC Clock */ + __HAL_RCC_RTC_CLK_ENABLE(); + /* The time base should be 1ms + Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK + HSE as RTC clock + Time base = ((99 + 1) * (9 + 1)) / 1MHz + = 1ms + LSE as RTC clock + Time base = ((31 + 1) * (0 + 1)) / 32.768KHz + = ~1ms + LSI as RTC clock + Time base = ((31 + 1) * (0 + 1)) / 32KHz + = 1ms + */ + hRTC_Handle.Instance = RTC; + hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; + hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; + hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; + hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; + hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + if (HAL_RTC_Init(&hRTC_Handle) != HAL_OK) + { + return HAL_ERROR; + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + + /* Disable the Alarm A interrupt */ + __HAL_RTC_ALARMA_DISABLE(&hRTC_Handle); + + /* Clear flag alarm A */ + __HAL_RTC_ALARM_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_ALRAF); + + counter = 0U; + /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ + while (__HAL_RTC_ALARM_GET_FLAG(&hRTC_Handle, RTC_FLAG_ALRAWF) == 0U) + { + if (counter++ == (SystemCoreClock / 48U)) /* Timeout = ~ 1s */ + { + return HAL_ERROR; + } + } + + hRTC_Handle.Instance->ALRMAR = (uint32_t)0x01U; + + /* Configure the Alarm state: Enable Alarm */ + __HAL_RTC_ALARMA_ENABLE(&hRTC_Handle); + /* Configure the Alarm interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + + /* Check if the Initialization mode is set */ + if ((hRTC_Handle.Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) + { + /* Set the Initialization mode */ + hRTC_Handle.Instance->ISR = (uint32_t)RTC_INIT_MASK; + counter = 0U; + while ((hRTC_Handle.Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) + { + if (counter++ == (SystemCoreClock / 48U)) /* Timeout = ~ 1s */ + { + return HAL_ERROR; + } + } + } + hRTC_Handle.Instance->DR = 0U; + hRTC_Handle.Instance->TR = 0U; + + hRTC_Handle.Instance->ISR &= (uint32_t)~RTC_ISR_INIT; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); + + HAL_NVIC_SetPriority(RTC_IRQn, TickPriority); + HAL_NVIC_EnableIRQ(RTC_IRQn); + return HAL_OK; + } + return HAL_ERROR; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling RTC ALARM interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Disable RTC ALARM update Interrupt */ + __HAL_RTC_ALARM_DISABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by Enabling RTC ALARM interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Enable RTC ALARM Update interrupt */ + __HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief ALARM A Event Callback in non blocking mode + * @note This function is called when RTC_ALARM interrupt took place, inside + * RTC_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param hrtc : RTC handle + * @retval None + */ +void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc) +{ + __IO uint32_t counter = 0U; + + HAL_IncTick(); + + __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); + + /* Set the Initialization mode */ + hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK; + + while ((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET) + { + if (counter++ == (SystemCoreClock / 48U)) /* Timeout = ~ 1s */ + { + break; + } + } + + hrtc->Instance->DR = 0U; + hrtc->Instance->TR = 0U; + + hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); +} + +/** + * @brief This function handles RTC ALARM interrupt request. + * @retval None + */ +void RTC_IRQHandler(void) +{ + HAL_RTC_AlarmIRQHandler(&hRTC_Handle); +} + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_timebase_rtc_wakeup_template.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_timebase_rtc_wakeup_template.c new file mode 100644 index 0000000000..0bfb32ffe3 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_timebase_rtc_wakeup_template.c @@ -0,0 +1,244 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_timebase_rtc_wakeup_template.c + * @author MCD Application Team + * @brief HAL time base based on the hardware RTC_WAKEUP Template. + * + * This file overrides the native HAL time base functions (defined as weak) + * to use the RTC WAKEUP for the time base generation: + * + Initializes the RTC peripheral and configures the wakeup timer to be + * incremented each 1ms + * + The wakeup feature is configured to assert an interrupt each 1ms + * + HAL_IncTick is called inside the HAL_RTCEx_WakeUpTimerEventCallback + * + HSE (default), LSE or LSI can be selected as RTC clock source + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32wl3x_hal_timebase_rtc_wakeup.c' + (#) Add this file and the RTC HAL drivers to your project and uncomment + HAL_RTC_MODULE_ENABLED define in stm32wl3x_hal_conf.h + + [..] + (@) HAL RTC alarm and HAL RTC wakeup drivers can't be used with low power modes: + The wake up capability of the RTC may be intrusive in case of prior low power mode + configuration requiring different wake up sources. + Application/Example behavior is no more guaranteed + (@) The stm32wl3x_hal_timebase_tim use is recommended for the Applications/Examples + requiring low power modes + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup HAL_TimeBase_RTC_WakeUp_Template HAL TimeBase RTC WakeUp Template + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Uncomment the line below to select the appropriate RTC Clock source for your application: + + RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing + precision. + + RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing + precision. + */ +#define RTC_CLOCK_SOURCE_LSE +/* #define RTC_CLOCK_SOURCE_LSI */ + +#define RTC_ASYNCH_PREDIV 0U +#define RTC_SYNCH_PREDIV 31U + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +extern RTC_HandleTypeDef hRTC_Handle; +RTC_HandleTypeDef hRTC_Handle; + +/* Private function prototypes -----------------------------------------------*/ +void RTC_IRQHandler(void); + +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the RTC_WKUP as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * Wakeup Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK + = 1ms + * Wakeup Time = WakeupTimebase * WakeUpCounter (0 + 1) + = 1 ms + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + __IO uint32_t counter = 0U; + + RCC_OscInitTypeDef RCC_OscInitStruct; + +#ifdef RTC_CLOCK_SOURCE_LSE + /* Configure LSE as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; +#elif defined (RTC_CLOCK_SOURCE_LSI) + /* Configure LSI as RTC clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI1; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; +#error Please select the RTC Clock source +#endif /* RTC_CLOCK_SOURCE_LSE */ + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) + { + /* Enable RTC Clock */ + __HAL_RCC_RTC_CLK_ENABLE(); + /* The time base should be 1ms + Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK + HSE as RTC clock + Time base = ((99 + 1) * (9 + 1)) / 1Mhz + = 1ms + LSE as RTC clock + Time base = ((31 + 1) * (0 + 1)) / 32.768Khz + = ~1ms + LSI as RTC clock + Time base = ((31 + 1) * (0 + 1)) / 32Khz + = 1ms + */ + hRTC_Handle.Instance = RTC; + hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; + hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; + hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; + hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; + hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + if (HAL_RTC_Init(&hRTC_Handle) != HAL_OK) + { + return HAL_ERROR; + } + + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + + /* Disable the Wake-up Timer */ + __HAL_RTC_WAKEUPTIMER_DISABLE(&hRTC_Handle); + + /* In case of interrupt mode is used, the interrupt source must disabled */ + __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); + + /* Wait till RTC WUTWF flag is set */ + while (__HAL_RTC_WAKEUPTIMER_GET_FLAG(&hRTC_Handle, RTC_FLAG_WUTWF) == 0U) + { + if (counter++ == (SystemCoreClock / 48U)) + { + return HAL_ERROR; + } + } + + /* Clear RTC Wake Up timer Flag */ + __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_WUTF); + + /* Configure the Wake-up Timer counter */ + hRTC_Handle.Instance->WUTR = 0U; + + /* Clear the Wake-up Timer clock source bits in CR register */ + hRTC_Handle.Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; + + /* Configure the clock source */ + hRTC_Handle.Instance->CR |= (uint32_t)RTC_WAKEUPCLOCK_CK_SPRE_16BITS; + + /* Configure the Interrupt in the RTC_CR register */ + __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT); + + /* Enable the Wake-up Timer */ + __HAL_RTC_WAKEUPTIMER_ENABLE(&hRTC_Handle); + + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); + + HAL_NVIC_SetPriority(RTC_IRQn, TickPriority); + HAL_NVIC_EnableIRQ(RTC_IRQn); + return HAL_OK; + } + + return HAL_ERROR; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling RTC_WKUP interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Disable WAKE UP TIMER Interrupt */ + __HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by Enabling RTC_WKUP interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Disable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); + /* Enable WAKE UP TIMER interrupt */ + __HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT); + /* Enable the write protection for RTC registers */ + __HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); +} + +/** + * @brief Wake Up Timer Event Callback in non blocking mode + * @note This function is called when RTC_WKUP interrupt took place, inside + * RTC_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param hrtc : RTC handle + * @retval None + */ +void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) +{ + HAL_IncTick(); +} + +/** + * @brief This function handles WAKE UP TIMER interrupt request. + * @retval None + */ +void RTC_IRQHandler(void) +{ + HAL_RTCEx_WakeUpTimerIRQHandler(&hRTC_Handle); +} + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_timebase_tim_template.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_timebase_tim_template.c new file mode 100644 index 0000000000..8dc8938798 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_timebase_tim_template.c @@ -0,0 +1,161 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_timebase_tim_template.c + * @author MCD Application Team + * @brief HAL time base based on the hardware TIM Template. + * + * This file overrides the native HAL time base functions (defined as weak) + * the TIM time base: + * + Initializes the TIM peripheral generate a Period elapsed Event each 1ms + * when uwTickFreq is set to default value, else 10 ms or + * 100 ms, depending of above global variable value. + * + HAL_IncTick is called inside HAL_TIM_PeriodElapsedCallback + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + This file must be copied to the application folder and modified as follows: + (#) Rename it to 'stm32wl3x_hal_timebase_tim.c' + (#) Add this file and the TIM HAL drivers to your project and uncomment + HAL_TIM_MODULE_ENABLED define in stm32wl3x_hal_conf.h + + @endverbatim + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @addtogroup HAL_TimeBase_TIM + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +extern TIM_HandleTypeDef TimHandle; +TIM_HandleTypeDef TimHandle; +/* Private function prototypes -----------------------------------------------*/ +void TIM1_IRQHandler(void); +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief This function configures the TIM2 as a time base source. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + uint32_t uwTimclock; + uint32_t uwPrescalerValue; + + /*Configure the TIM2 IRQ priority */ + HAL_NVIC_SetPriority(TIM2_IRQn, TickPriority, 0); + + /* Enable the TIM1 global Interrupt */ + HAL_NVIC_EnableIRQ(TIM2_IRQn); + + /* Enable TIM2 clock */ + __HAL_RCC_TIM2_CLK_ENABLE(); + + uwTimclock = HAL_RCC_GetSysClockFreq(); + + /* Compute the prescaler value to have TIM1 counter clock equal to 1MHz */ + uwPrescalerValue = (uint32_t)((uwTimclock / 1000000U) - 1U); + + /* Initialize TIM2 */ + TimHandle.Instance = TIM2; + + /* Initialize TIMx peripheral as follow: + + Period = [(TIM1CLK/1000) - 1]. to have a (1/1000) s time base. + + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock. + + ClockDivision = 0 + + Counter direction = Up + */ + TimHandle.Init.Period = (1000000U / 1000U) - 1U; + TimHandle.Init.Prescaler = uwPrescalerValue; + TimHandle.Init.ClockDivision = 0U; + TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP; + if (HAL_TIM_Base_Init(&TimHandle) == HAL_OK) + { + /* Start the TIM time Base generation in interrupt mode */ + return HAL_TIM_Base_Start_IT(&TimHandle); + } + + /* Return function status */ + return HAL_ERROR; +} + +/** + * @brief Suspend Tick increment. + * @note Disable the tick increment by disabling TIM1 update interrupt. + * @retval None + */ +void HAL_SuspendTick(void) +{ + /* Disable TIM1 update Interrupt */ + __HAL_TIM_DISABLE_IT(&TimHandle, TIM_IT_UPDATE); +} + +/** + * @brief Resume Tick increment. + * @note Enable the tick increment by Enabling TIM1 update interrupt. + * @retval None + */ +void HAL_ResumeTick(void) +{ + /* Enable TIM1 Update interrupt */ + __HAL_TIM_ENABLE_IT(&TimHandle, TIM_IT_UPDATE); +} + +/** + * @brief Period elapsed callback in non blocking mode + * @note This function is called when TIM1 interrupt took place, inside + * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment + * a global variable "uwTick" used as application time base. + * @param htim : TIM handle + * @retval None + */ +void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) +{ + HAL_IncTick(); +} + +/** + * @brief This function handles TIM interrupt request. + * @retval None + */ +void TIM1_IRQHandler(void) +{ + HAL_TIM_IRQHandler(&TimHandle); +} + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_uart.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_uart.c new file mode 100644 index 0000000000..46124042b5 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_uart.c @@ -0,0 +1,4781 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_uart.c + * @author MCD Application Team + * @brief UART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The UART HAL driver can be used as follows: + + (#) Declare a UART_HandleTypeDef handle structure (eg. UART_HandleTypeDef huart). + (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) UART pins configuration: + (+++) Enable the clock for the UART GPIOs. + (+++) Configure these UART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() + and HAL_UART_Receive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) UART interrupts handling: + -@@- The specific UART interrupts (Transmission complete interrupt, + RXNE interrupt, RX/TX FIFOs related interrupts and Error Interrupts) + are managed using the macros __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() + inside the transmit and receive processes. + (++) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() + and HAL_UART_Receive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer complete + interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Prescaler value , Hardware + flow control and Mode (Receiver/Transmitter) in the huart handle Init structure. + + (#) If required, program UART advanced features (TX/RX pins swap, auto Baud rate detection,...) + in the huart handle AdvancedInit structure. + + (#) For the UART asynchronous mode, initialize the UART registers by calling + the HAL_UART_Init() API. + + (#) For the UART Half duplex mode, initialize the UART registers by calling + the HAL_HalfDuplex_Init() API. + + (#) For the UART LIN (Local Interconnection Network) mode, initialize the UART registers + by calling the HAL_LIN_Init() API. + + (#) For the UART Multiprocessor mode, initialize the UART registers + by calling the HAL_MultiProcessor_Init() API. + + (#) For the UART RS485 Driver Enabled mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + [..] + (@) These API's (HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init(), HAL_MultiProcessor_Init(), + also configure the low level Hardware GPIO, CLOCK, CORTEX...etc) by + calling the customized HAL_UART_MspInit() API. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_UART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_UART_RegisterCallback() to register a user callback. + Function HAL_UART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_UART_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_UART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback. + (+) AbortReceiveCpltCallback : Abort Receive Complete Callback. + (+) WakeupCallback : Wakeup Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : UART MspInit. + (+) MspDeInitCallback : UART MspDeInit. + + [..] + For specific callback RxEventCallback, use dedicated registration/reset functions: + respectively HAL_UART_RegisterRxEventCallback() , HAL_UART_UnRegisterRxEventCallback(). + + [..] + By default, after the HAL_UART_Init() and when the state is HAL_UART_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_UART_TxCpltCallback(), HAL_UART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_UART_Init() + and HAL_UART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_UART_Init() and HAL_UART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_UART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_UART_STATE_READY or HAL_UART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_UART_RegisterCallback() before calling HAL_UART_DeInit() + or HAL_UART_Init() function. + + [..] + When The compilation define USE_HAL_UART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup UART UART + * @brief HAL UART module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UART_Private_Constants UART Private Constants + * @{ + */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \ + USART_CR1_OVER8 | USART_CR1_FIFOEN)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT | USART_CR3_TXFTCFG | \ + USART_CR3_RXFTCFG)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */ + +#define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */ +#define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */ + +#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */ +#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup UART_Private_Functions + * @{ + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart); +#if defined(HAL_DMA_MODULE_ENABLED) +static void UART_EndTxTransfer(UART_HandleTypeDef *huart); +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void UART_DMAError(DMA_HandleTypeDef *hdma); +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma); +#endif /* HAL_DMA_MODULE_ENABLED */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart); +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart); +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @addtogroup UART_Private_variables + * @{ + */ +const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U}; +/** + * @} + */ + +/* Exported Constants --------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UART_Exported_Functions UART Exported Functions + * @{ + */ + +/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init()and HAL_MultiProcessor_Init()API + follow respectively the UART asynchronous, UART Half duplex, UART LIN mode + and UART multiprocessor mode configuration procedures (details for the procedures + are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the UART mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + if (huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) + { + /* Check the parameters */ + assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); + } + else + { + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In asynchronous mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Initialize the half-duplex mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check UART instance */ + assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In half-duplex mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the LIN mode according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param BreakDetectLength Specifies the LIN break detection length. + * This parameter can be one of the following values: + * @arg @ref UART_LINBREAKDETECTLENGTH_10B 10-bit break detection + * @arg @ref UART_LINBREAKDETECTLENGTH_11B 11-bit break detection + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the LIN UART instance */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + /* Check the Break detection length parameter */ + assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); + + /* LIN mode limited to 16-bit oversampling only */ + if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + return HAL_ERROR; + } + /* LIN mode limited to 8-bit data length */ + if (huart->Init.WordLength != UART_WORDLENGTH_8B) + { + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In LIN mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); + + /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ + SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); + + /* Set the USART LIN Break detection length. */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief Initialize the multiprocessor mode according to the specified + * parameters in the UART_InitTypeDef and initialize the associated handle. + * @param huart UART handle. + * @param Address UART node address (4-, 6-, 7- or 8-bit long). + * @param WakeUpMethod Specifies the UART wakeup method. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUPMETHOD_IDLELINE WakeUp by an idle line detection + * @arg @ref UART_WAKEUPMETHOD_ADDRESSMARK WakeUp by an address mark + * @note If the user resorts to idle line detection wake up, the Address parameter + * is useless and ignored by the initialization function. + * @note If the user resorts to address mark wake up, the address length detection + * is configured by default to 4 bits only. For the UART to be able to + * manage 6-, 7- or 8-bit long addresses detection, the API + * HAL_MultiProcessorEx_AddressLength_Set() must be called after + * HAL_MultiProcessor_Init(). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the wake up method parameter */ + assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In multiprocessor mode, the following bits must be kept cleared: + - LINEN and CLKEN bits in the USART_CR2 register, + - SCEN, HDSEL and IREN bits in the USART_CR3 register. */ + CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK) + { + /* If address mark wake up method is chosen, set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS)); + } + + /* Set the wake up method by setting the WAKE bit in the CR1 register */ + MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); + + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + + +/** + * @brief DeInitialize the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param((IS_UART_INSTANCE(huart->Instance)) || (IS_LPUART_INSTANCE(huart->Instance))); + + huart->gState = HAL_UART_STATE_BUSY; + + __HAL_UART_DISABLE(huart); + + huart->Instance->CR1 = 0x0U; + huart->Instance->CR2 = 0x0U; + huart->Instance->CR3 = 0x0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + if (huart->MspDeInitCallback == NULL) + { + huart->MspDeInitCallback = HAL_UART_MspDeInit; + } + /* DeInit the low level hardware */ + huart->MspDeInitCallback(huart); +#else + /* DeInit the low level hardware */ + HAL_UART_MspDeInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_RESET; + huart->RxState = HAL_UART_STATE_RESET; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Initialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the UART MSP. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User UART Callback + * To be used to override the weak predefined callback + * @note The HAL_UART_RegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, + pUART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->gState == HAL_UART_STATE_READY) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = pCallback; + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = pCallback; + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = pCallback; + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = pCallback; + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = pCallback; + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = pCallback; + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = pCallback; + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = pCallback; + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = pCallback; + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (huart->gState == HAL_UART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = pCallback; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = pCallback; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an UART Callback + * UART callaback is redirected to the weak predefined callback + * @note The HAL_UART_UnRegisterCallback() may be called before HAL_UART_Init(), HAL_HalfDuplex_Init(), + * HAL_LIN_Init(), HAL_MultiProcessor_Init() or HAL_RS485Ex_Init() in HAL_UART_STATE_RESET to un-register + * callbacks for HAL_UART_MSPINIT_CB_ID and HAL_UART_MSPDEINIT_CB_ID + * @param huart uart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_UART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_UART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_UART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_UART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_UART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_UART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID + * @arg @ref HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID + * @arg @ref HAL_UART_WAKEUP_CB_ID Wakeup Callback ID + * @arg @ref HAL_UART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_UART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_UART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_UART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_UART_STATE_READY == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_TX_HALFCOMPLETE_CB_ID : + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_UART_TX_COMPLETE_CB_ID : + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_UART_RX_HALFCOMPLETE_CB_ID : + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_UART_RX_COMPLETE_CB_ID : + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_UART_ERROR_CB_ID : + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_UART_ABORT_COMPLETE_CB_ID : + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_UART_ABORT_TRANSMIT_COMPLETE_CB_ID : + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak + AbortTransmitCpltCallback */ + break; + + case HAL_UART_ABORT_RECEIVE_COMPLETE_CB_ID : + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak + AbortReceiveCpltCallback */ + break; + + case HAL_UART_WAKEUP_CB_ID : + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + break; + + case HAL_UART_RX_FIFO_FULL_CB_ID : + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_UART_TX_FIFO_EMPTY_CB_ID : + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else if (HAL_UART_STATE_RESET == huart->gState) + { + switch (CallbackID) + { + case HAL_UART_MSPINIT_CB_ID : + huart->MspInitCallback = HAL_UART_MspInit; + break; + + case HAL_UART_MSPDEINIT_CB_ID : + huart->MspDeInitCallback = HAL_UART_MspDeInit; + break; + + default : + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + break; + } + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Register a User UART Rx Event Callback + * To be used instead of the weak predefined callback + * @param huart Uart handle + * @param pCallback Pointer to the Rx Event Callback function + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = pCallback; + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief UnRegister the UART Rx Event Callback + * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback + * @param huart Uart handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (huart->RxState == HAL_UART_STATE_READY) + { + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */ + } + else + { + huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK; + + status = HAL_ERROR; + } + + return status; +} + +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group2 IO operation functions + * @brief UART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the UART asynchronous + and Half duplex data transfers. + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) Non-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (++) HAL_UART_Transmit() + (++) HAL_UART_Receive() + + (#) Non-Blocking mode API's with Interrupt are : + (++) HAL_UART_Transmit_IT() + (++) HAL_UART_Receive_IT() + (++) HAL_UART_IRQHandler() + + (#) Non-Blocking mode API's with DMA are : + (++) HAL_UART_Transmit_DMA() + (++) HAL_UART_Receive_DMA() + (++) HAL_UART_DMAPause() + (++) HAL_UART_DMAResume() + (++) HAL_UART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (++) HAL_UART_TxHalfCpltCallback() + (++) HAL_UART_TxCpltCallback() + (++) HAL_UART_RxHalfCpltCallback() + (++) HAL_UART_RxCpltCallback() + (++) HAL_UART_ErrorCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_UART_Abort() + (++) HAL_UART_AbortTransmit() + (++) HAL_UART_AbortReceive() + (++) HAL_UART_Abort_IT() + (++) HAL_UART_AbortTransmit_IT() + (++) HAL_UART_AbortReceive_IT() + + (#) For Abort services based on interrupts (HAL_UART_Abortxxx_IT), a set of Abort Complete Callbacks are provided: + (++) HAL_UART_AbortCpltCallback() + (++) HAL_UART_AbortTransmitCpltCallback() + (++) HAL_UART_AbortReceiveCpltCallback() + + (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced + reception services: + (++) HAL_UARTEx_RxEventCallback() + + (#) Wakeup from Stop mode Callback: + (++) HAL_UARTEx_WakeupCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error + in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user + to identify error type, and HAL_UART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on UART side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, and HAL_UART_ErrorCallback() + user callback is executed. + + -@- In the Half duplex communication, it is forbidden to run the transmit + and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful. + +@endverbatim + * @{ + */ + +/** + * @brief Send an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When FIFO mode is enabled, writing a data in the TDR register adds one + * data to the TXFIFO. Write operations to the TDR register are performed + * when TXFNF flag is set. From hardware perspective, TXFNF flag and + * TXE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + const uint8_t *pdata8bits; + const uint16_t *pdata16bits; + uint32_t tickstart; + + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (const uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + while (huart->TxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + huart->Instance->TDR = (uint16_t)(*pdata16bits & 0x01FFU); + pdata16bits++; + } + else + { + huart->Instance->TDR = (uint8_t)(*pdata8bits & 0xFFU); + pdata8bits++; + } + huart->TxXferCount--; + } + + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + huart->gState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + if (UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + huart->RxXferCount--; + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + huart->TxISR = NULL; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + /* Configure Tx interrupt processing */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT_FIFOEN; + } + else + { + huart->TxISR = UART_TxISR_8BIT_FIFOEN; + } + + /* Enable the TX FIFO threshold interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->TxISR = UART_TxISR_16BIT; + } + else + { + huart->TxISR = UART_TxISR_8BIT; + } + + /* Enable the Transmit Data Register Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_IT(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Send an amount of data in DMA mode. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) +{ + /* Check that a Tx process is not already ongoing */ + if (huart->gState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + huart->pTxBuffPtr = pData; + huart->TxXferSize = Size; + huart->TxXferCount = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->gState = HAL_UART_STATE_BUSY_TX; + + if (huart->hdmatx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmatx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmatx->XferAbortCallback = NULL; + + /* Enable the UART transmit DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmatx, (uint32_t)huart->pTxBuffPtr, (uint32_t)&huart->Instance->TDR, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->gState to ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + /* Clear the TC flag in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_TCF); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Set Reception type to Standard reception */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + return (UART_Start_Receive_DMA(huart, pData, Size)); + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) +{ + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + /* Disable the UART DMA Tx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the UART DMA Rx request */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) +{ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + /* Enable the UART DMA Tx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); + } + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + /* Clear the Overrun flag before resuming the Rx transfer */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the UART DMA Rx request */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + } + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() / + HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel */ + if (huart->hdmatx != NULL) + { + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + UART_EndRxTransfer(huart); + } + + return HAL_OK; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart) +{ + /* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | + USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart) +{ + /* Disable TCIE, TXEIE and TXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (blocking mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart) +{ + /* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(huart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(huart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_Abort_IT(UART_HandleTypeDef *huart) +{ + uint32_t abortcplt = 1U; + + /* Disable interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE | + USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (huart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + huart->hdmatx->XferAbortCallback = UART_DMATxAbortCallback; + } + else + { + huart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (huart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if UART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + huart->hdmarx->XferAbortCallback = UART_DMARxAbortCallback; + } + else + { + huart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at UART level */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* UART Tx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + huart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* UART Rx DMA Abort callback has already been initialised : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + huart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Transmit transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Tx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the UART DMA Tx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmatx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmatx->XferAbortCallback = UART_DMATxOnlyAbortCallback; + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(huart->hdmatx) != HAL_OK) + { + /* Call Directly huart->hdmatx->XferAbortCallback function in case of error */ + huart->hdmatx->XferAbortCallback(huart->hdmatx); + } + } + else + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Tx transfer counter */ + huart->TxXferCount = 0U; + + /* Clear TxISR function pointers */ + huart->TxISR = NULL; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Abort ongoing Receive transfer (Interrupt mode). + * @param huart UART handle. + * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable UART Interrupts (Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE)); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_AbortCpltCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMARxOnlyAbortCallback; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Reset Rx transfer counter */ + huart->RxXferCount = 0U; + + /* Clear RxISR function pointer */ + huart->pRxBuffPtr = NULL; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle UART interrupt request. + * @param huart UART handle. + * @retval None + */ +void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) +{ + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF)); + if (errorflags == 0U) + { + /* UART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE)) != 0U)))) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* UART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + huart->ErrorCode |= HAL_UART_ERROR_ORE; + } + + /* UART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + huart->ErrorCode |= HAL_UART_ERROR_RTO; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* UART in mode Receiver --------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (huart->RxISR != NULL) + { + huart->RxISR(huart); + } + } + + /* If Error is to be considered as blocking : + - Receiver Timeout error in Reception + - Overrun error in Reception + - any error occurs in DMA mode reception + */ + errorcode = huart->ErrorCode; + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) || + ((errorcode & (HAL_UART_ERROR_RTO | HAL_UART_ERROR_ORE)) != 0U)) + { + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts, and disable Rx DMA request, if ongoing */ + UART_EndRxTransfer(huart); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the UART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the UART DMA Rx request if enabled */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the UART DMA Rx channel */ + if (huart->hdmarx != NULL) + { + /* Set the UART DMA Abort callback : + will lead to call HAL_UART_ErrorCallback() at end of DMA abort procedure */ + huart->hdmarx->XferAbortCallback = UART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(huart->hdmarx) != HAL_OK) + { + /* Call Directly huart->hdmarx->XferAbortCallback function in case of error */ + huart->hdmarx->XferAbortCallback(huart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Call user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + && ((isrflags & USART_ISR_IDLE) != 0U) + && ((cr1its & USART_ISR_IDLE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Check if DMA mode is enabled in UART */ + if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) + { + /* DMA mode enabled */ + /* Check received length : If all expected data are received, do nothing, + (DMA cplt callback will be called). + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx); + if ((nb_remaining_rx_data > 0U) + && (nb_remaining_rx_data < huart->RxXferSize)) + { + /* Reception is not complete */ + huart->RxXferCount = nb_remaining_rx_data; + + /* In Normal mode, end DMA xfer and HAL UART Rx process*/ + if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Last bytes received, so no need as the abort is immediate */ + (void)HAL_DMA_Abort(huart->hdmarx); + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* If DMA is in Circular mode, Idle event is to be reported to user + even if occurring after a Transfer Complete event from DMA */ + if (nb_remaining_rx_data == huart->RxXferSize) + { + if (HAL_IS_BIT_SET(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC)) + { + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + } + } + return; + } + else + { +#endif /* HAL_DMA_MODULE_ENABLED */ + /* DMA mode not enabled */ + /* Check received length : If all expected data are received, do nothing. + Otherwise, if at least one data has already been received, IDLE event is to be notified to user */ + uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount; + if ((huart->RxXferCount > 0U) + && (nb_rx_data > 0U)) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt:(Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Idle Event */ + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxEventCallback(huart, nb_rx_data); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, nb_rx_data); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + return; +#if defined(HAL_DMA_MODULE_ENABLED) + } +#endif /* HAL_DMA_MODULE_ENABLED */ + } + + /* UART wakeup from Stop mode interrupt occurred ---------------------------*/ + if (((isrflags & USART_ISR_WUF) != 0U) && ((cr3its & USART_CR3_WUFIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_WUF); + + /* UART Rx state is not reset as a reception process might be ongoing. + If UART handle state fields need to be reset to READY, this could be done in Wakeup callback */ + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Wakeup Callback */ + huart->WakeupCallback(huart); +#else + /* Call legacy weak Wakeup Callback */ + HAL_UARTEx_WakeupCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (huart->TxISR != NULL) + { + huart->TxISR(huart); + } + return; + } + + /* UART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + UART_EndTransmit_IT(huart); + return; + } + + /* UART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + huart->TxFifoEmptyCallback(huart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_UARTEx_TxFifoEmptyCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } + + /* UART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + huart->RxFifoFullCallback(huart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_UARTEx_RxFifoFullCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_UART_RxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART error callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortTransmitCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief UART Abort Receive Complete callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UART_AbortReceiveCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Reception Event Callback (Rx event notification called after use of advanced reception service). + * @param huart UART handle + * @param Size Number of data available in application reception buffer (indicates a position in + * reception buffer until which, data are available) + * @retval None + */ +__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + UNUSED(Size); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxEventCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions + * @brief UART control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the UART. + (+) HAL_UART_ReceiverTimeout_Config() API allows to configure the receiver timeout value on the fly + (+) HAL_UART_EnableReceiverTimeout() API enables the receiver timeout feature + (+) HAL_UART_DisableReceiverTimeout() API disables the receiver timeout feature + (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode + (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode + (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode + (+) UART_SetConfig() API configures the UART peripheral + (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features + (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization + (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter + (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver + (+) HAL_LIN_SendBreak() API transmits the break characters +@endverbatim + * @{ + */ + +/** + * @brief Update on the fly the receiver timeout value in RTOR register. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @param TimeoutValue receiver timeout value in number of baud blocks. The timeout + * value must be less or equal to 0x0FFFFFFFF. + * @retval None + */ +void HAL_UART_ReceiverTimeout_Config(UART_HandleTypeDef *huart, uint32_t TimeoutValue) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + assert_param(IS_UART_RECEIVER_TIMEOUT_VALUE(TimeoutValue)); + MODIFY_REG(huart->Instance->RTOR, USART_RTOR_RTO, TimeoutValue); + } +} + +/** + * @brief Enable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_EnableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Set the USART RTOEN bit */ + SET_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Disable the UART receiver timeout feature. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UART_DisableReceiverTimeout(UART_HandleTypeDef *huart) +{ + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + if (huart->gState == HAL_UART_STATE_READY) + { + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear the USART RTOEN bit */ + CLEAR_BIT(huart->Instance->CR2, USART_CR2_RTOEN); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } + } + else + { + return HAL_ERROR; + } +} + +/** + * @brief Enable UART in mute mode (does not mean UART enters mute mode; + * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Enable USART mute mode by setting the MME bit in the CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Disable UART mute mode (does not mean the UART actually exits mute mode + * as it may not have been in mute mode at this very moment). + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable USART mute mode by clearing the MME bit in the CR1 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME); + + huart->gState = HAL_UART_STATE_READY; + + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Enter UART mute mode (means UART actually enters mute mode). + * @note To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. + * @param huart UART handle. + * @retval None + */ +void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) +{ + __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST); +} + +/** + * @brief Enable the UART transmitter and disable the UART receiver. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the UART receiver and disable the UART transmitter. + * @param huart UART handle. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) +{ + __HAL_LOCK(huart); + huart->gState = HAL_UART_STATE_BUSY; + + /* Clear TE and RE bits */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE)); + + /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RE); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + + +/** + * @brief Transmit break characters. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) +{ + /* Check the parameters */ + assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); + + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Send break characters */ + __HAL_UART_SEND_REQ(huart, UART_SENDBREAK_REQUEST); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief UART Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the UART handle state. + (+) Return the UART handle error code + +@endverbatim + * @{ + */ + +/** + * @brief Return the UART handle state. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval HAL state + */ +HAL_UART_StateTypeDef HAL_UART_GetState(const UART_HandleTypeDef *huart) +{ + uint32_t temp1; + uint32_t temp2; + temp1 = huart->gState; + temp2 = huart->RxState; + + return (HAL_UART_StateTypeDef)(temp1 | temp2); +} + +/** + * @brief Return the UART handle error code. + * @param huart Pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART. + * @retval UART Error Code + */ +uint32_t HAL_UART_GetError(const UART_HandleTypeDef *huart) +{ + return huart->ErrorCode; +} +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup UART_Private_Functions UART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param huart UART handle. + * @retval none + */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) +void UART_InitCallbacksToDefault(UART_HandleTypeDef *huart) +{ + /* Init the UART Callback settings */ + huart->TxHalfCpltCallback = HAL_UART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + huart->TxCpltCallback = HAL_UART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + huart->RxHalfCpltCallback = HAL_UART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + huart->RxCpltCallback = HAL_UART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + huart->ErrorCallback = HAL_UART_ErrorCallback; /* Legacy weak ErrorCallback */ + huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */ + huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */ + huart->WakeupCallback = HAL_UARTEx_WakeupCallback; /* Legacy weak WakeupCallback */ + huart->RxFifoFullCallback = HAL_UARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + huart->TxFifoEmptyCallback = HAL_UARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */ + +} +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + +/** + * @brief Configure the UART peripheral. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart) +{ + uint32_t tmpreg; + uint16_t brrtemp; + uint32_t usartdiv; + HAL_StatusTypeDef ret = HAL_OK; + uint32_t lpuart_ker_ck_pres; + uint32_t pclk; + + /* Check the parameters */ + assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); + assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); + if (UART_INSTANCE_LOWPOWER(huart)) + { + assert_param(IS_LPUART_STOPBITS(huart->Init.StopBits)); + } + else + { + assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); + assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); + } + + assert_param(IS_UART_PARITY(huart->Init.Parity)); + assert_param(IS_UART_MODE(huart->Init.Mode)); + assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); + assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); + assert_param(IS_UART_PRESCALER(huart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure + * the UART Word Length, Parity, Mode and oversampling: + * set the M bits according to huart->Init.WordLength value + * set PCE and PS bits according to huart->Init.Parity value + * set TE and RE bits according to huart->Init.Mode value + * set OVER8 bit according to huart->Init.OverSampling value */ + tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ; + MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*-------------------------- USART CR2 Configuration -----------------------*/ + /* Configure the UART Stop Bits: Set STOP[13:12] bits according + * to huart->Init.StopBits value */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); + + /*-------------------------- USART CR3 Configuration -----------------------*/ + /* Configure + * - UART HardWare Flow Control: set CTSE and RTSE bits according + * to huart->Init.HwFlowCtl value + * - one-bit sampling method versus three samples' majority rule according + * to huart->Init.OneBitSampling (not applicable to LPUART) */ + tmpreg = (uint32_t)huart->Init.HwFlowCtl; + + if (!(UART_INSTANCE_LOWPOWER(huart))) + { + tmpreg |= huart->Init.OneBitSampling; + } + MODIFY_REG(huart->Instance->CR3, USART_CR3_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - UART Clock Prescaler : set PRESCALER according to huart->Init.ClockPrescaler value */ + MODIFY_REG(huart->Instance->PRESC, USART_PRESC_PRESCALER, huart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + /* Check LPUART instance */ + if (UART_INSTANCE_LOWPOWER(huart)) + { + /* Retrieve frequency clock */ + pclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_LPUART1); + + /* If proper clock source reported */ + if (pclk != 0U) + { + /* Compute clock after Prescaler */ + lpuart_ker_ck_pres = (pclk / UARTPrescTable[huart->Init.ClockPrescaler]); + + /* Ensure that Frequency clock is in the range [3 * baudrate, 4096 * baudrate] */ + if ((lpuart_ker_ck_pres < (3U * huart->Init.BaudRate)) || + (lpuart_ker_ck_pres > (4096U * huart->Init.BaudRate))) + { + ret = HAL_ERROR; + } + else + { + /* Check computed UsartDiv value is in allocated range + (it is forbidden to write values lower than 0x300 in the LPUART_BRR register) */ + usartdiv = (uint32_t)(UART_DIV_LPUART(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= LPUART_BRR_MIN) && (usartdiv <= LPUART_BRR_MAX)) + { + huart->Instance->BRR = usartdiv; + } + else + { + ret = HAL_ERROR; + } + } /* if ( (lpuart_ker_ck_pres < (3 * huart->Init.BaudRate) ) || + (lpuart_ker_ck_pres > (4096 * huart->Init.BaudRate) )) */ + } /* if (pclk != 0) */ + } + /* Check UART Over Sampling to set Baud Rate Register */ + else if (huart->Init.OverSampling == UART_OVERSAMPLING_8) + { + pclk = UART_PERIPHCLK; + + /* USARTDIV must be greater than or equal to 0d16 */ + if (pclk != 0U) + { + usartdiv = (uint32_t)(UART_DIV_SAMPLING8(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + huart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + } + } + else + { + pclk = UART_PERIPHCLK; + + if (pclk != 0U) + { + /* USARTDIV must be greater than or equal to 0d16 */ + usartdiv = (uint32_t)(UART_DIV_SAMPLING16(pclk, huart->Init.BaudRate, huart->Init.ClockPrescaler)); + if ((usartdiv >= UART_BRR_MIN) && (usartdiv <= UART_BRR_MAX)) + { + huart->Instance->BRR = (uint16_t)usartdiv; + } + else + { + ret = HAL_ERROR; + } + } + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + huart->NbTxDataToProcess = 1; + huart->NbRxDataToProcess = 1; + + /* Clear ISR function pointers */ + huart->RxISR = NULL; + huart->TxISR = NULL; + + return ret; +} + +/** + * @brief Configure the UART peripheral advanced features. + * @param huart UART handle. + * @retval None + */ +void UART_AdvFeatureConfig(UART_HandleTypeDef *huart) +{ + /* Check whether the set of advanced features to configure is properly set */ + assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit)); + + /* if required, configure RX/TX pins swap */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT)) + { + assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap); + } + + /* if required, configure TX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert); + } + + /* if required, configure RX pin active level inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert); + } + + /* if required, configure data inversion */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert); + } + + /* if required, configure RX overrun detection disabling */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT)) + { + assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable); + } + +#if defined(HAL_DMA_MODULE_ENABLED) + /* if required, configure DMA disabling on reception error */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT)) + { + assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError)); + MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError); + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* if required, configure auto Baud rate detection scheme */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT)) + { + assert_param(IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(huart->Instance)); + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable); + /* set auto Baudrate detection parameters if detection is enabled */ + if (huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE) + { + assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode); + } + } + + /* if required, configure MSB first on communication line */ + if (HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT)) + { + assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst)); + MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst); + } +} + +/** + * @brief Check the UART Idle State. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart) +{ + uint32_t tickstart; + + /* Initialize the UART ErrorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable TXE interrupt for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE)); + + huart->gState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Check if the Receiver is enabled */ + if ((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) + interrupts for the interrupt process */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + huart->RxState = HAL_UART_STATE_READY; + + __HAL_UNLOCK(huart); + + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief This function handles UART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param huart UART handle. + * @param Flag Specifies the UART flag to check + * @param Status The actual Flag status (SET or RESET) + * @param Tickstart Tick start value + * @param Timeout Timeout duration + * @retval HAL status + */ +HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_UART_GET_FLAG(huart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + + return HAL_TIMEOUT; + } + + if ((READ_BIT(huart->Instance->CR1, USART_CR1_RE) != 0U) && (Flag != UART_FLAG_TXE) && (Flag != UART_FLAG_TC)) + { + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_ORE) == SET) + { + /* Clear Overrun Error flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_ORE; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_ERROR; + } + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RTOF) == SET) + { + /* Clear Receiver Timeout flag*/ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_RTOF); + + /* Blocking error : transfer is aborted + Set the UART state ready to be able to start again the process, + Disable Rx Interrupts if ongoing */ + UART_EndRxTransfer(huart); + + huart->ErrorCode = HAL_UART_ERROR_RTO; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_TIMEOUT; + } + } + } + } + return HAL_OK; +} + +/** + * @brief Start Receive operation in interrupt mode. + * @note This function could be called by all HAL UART API providing reception in Interrupt mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + huart->RxXferCount = Size; + huart->RxISR = NULL; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT_FIFOEN; + } + else + { + huart->RxISR = UART_RxISR_8BIT_FIFOEN; + } + + /* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + huart->RxISR = UART_RxISR_16BIT; + } + else + { + huart->RxISR = UART_RxISR_8BIT; + } + + /* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + return HAL_OK; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Start Receive operation in DMA mode. + * @note This function could be called by all HAL UART API providing reception in DMA mode. + * @note When calling this function, parameters validity is considered as already checked, + * i.e. Rx State, buffer address, ... + * UART Handle is assumed as Locked. + * @param huart UART handle. + * @param pData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + huart->pRxBuffPtr = pData; + huart->RxXferSize = Size; + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + + if (huart->hdmarx != NULL) + { + /* Set the UART DMA transfer complete callback */ + huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; + + /* Set the UART DMA Half transfer complete callback */ + huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; + + /* Set the DMA error callback */ + huart->hdmarx->XferErrorCallback = UART_DMAError; + + /* Set the DMA abort callback */ + huart->hdmarx->XferAbortCallback = NULL; + + /* Enable the DMA channel */ + if (HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, (uint32_t)huart->pRxBuffPtr, Size) != HAL_OK) + { + /* Set error code to DMA */ + huart->ErrorCode = HAL_UART_ERROR_DMA; + + /* Restore huart->RxState to ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_ERROR; + } + } + + /* Enable the UART Parity Error Interrupt */ + if (huart->Init.Parity != UART_PARITY_NONE) + { + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the UART CR3 register */ + ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + return HAL_OK; +} + + +/** + * @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndTxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable TXEIE, TCIE, TXFT interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE)); + + /* At end of Tx process, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + + +/** + * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion). + * @param huart UART handle. + * @retval None + */ +static void UART_EndRxTransfer(UART_HandleTypeDef *huart) +{ + /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Reset RxIsr function pointer */ + huart->RxISR = NULL; +} + + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA UART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->TxXferCount = 0U; + + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + /* DMA Circular mode */ + else + { +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx Half complete callback*/ + huart->TxHalfCpltCallback(huart); +#else + /*Call legacy weak Tx Half complete callback*/ + HAL_UART_TxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + huart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA transfer for the receiver request by resetting the DMAR bit + in the UART CR3 register */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); + + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + } + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + huart->RxXferCount = 0; + + /* Check current nb of data still to be received on DMA side. + DMA Normal mode, remaining nb of data will be 0 + DMA Circular mode, remaining nb of data is reset to RxXferSize */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(hdma); + if (nb_remaining_rx_data < huart->RxXferSize) + { + /* Update nb of remaining data */ + huart->RxXferCount = nb_remaining_rx_data; + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + /* Initialize type of RxEvent that correspond to RxEvent callback execution; + In this case, Rx Event type is Half Transfer */ + huart->RxEventType = HAL_UART_RXEVENT_HT; + + /* Check current reception Mode : + If Reception till IDLE event has been selected : use Rx Event callback */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + huart->RxXferCount = huart->RxXferSize / 2U; + + /* Check current nb of data still to be received on DMA side. */ + uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(hdma); + if (nb_remaining_rx_data <= huart->RxXferSize) + { + /* Update nb of remaining data */ + huart->RxXferCount = nb_remaining_rx_data; + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount)); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + else + { + /* In other cases : use Rx Half Complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Half complete callback*/ + huart->RxHalfCpltCallback(huart); +#else + /*Call legacy weak Rx Half complete callback*/ + HAL_UART_RxHalfCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } +} + +/** + * @brief DMA UART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + const HAL_UART_StateTypeDef gstate = huart->gState; + const HAL_UART_StateTypeDef rxstate = huart->RxState; + + /* Stop UART DMA Tx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) && + (gstate == HAL_UART_STATE_BUSY_TX)) + { + huart->TxXferCount = 0U; + UART_EndTxTransfer(huart); + } + + /* Stop UART DMA Rx request if ongoing */ + if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) && + (rxstate == HAL_UART_STATE_BUSY_RX)) + { + huart->RxXferCount = 0U; + UART_EndRxTransfer(huart); + } + + huart->ErrorCode |= HAL_UART_ERROR_DMA; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + huart->RxXferCount = 0U; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmarx != NULL) + { + if (huart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (huart->hdmatx != NULL) + { + if (huart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + huart->TxXferCount = 0U; + huart->RxXferCount = 0U; + + /* Reset errorCode */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->gState and huart->RxState to Ready */ + huart->gState = HAL_UART_STATE_READY; + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort complete callback */ + huart->AbortCpltCallback(huart); +#else + /* Call legacy weak Abort complete callback */ + HAL_UART_AbortCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + + +/** + * @brief DMA UART Tx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortTransmit_IT API (Abort only Tx transfer) + * (This callback is executed at end of DMA Tx Abort procedure following user abort request, + * and leads to user Tx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)(hdma->Parent); + + huart->TxXferCount = 0U; + + /* Flush the whole TX FIFO (if needed) */ + if (huart->FifoMode == UART_FIFOMODE_ENABLE) + { + __HAL_UART_SEND_REQ(huart, UART_TXDATA_FLUSH_REQUEST); + } + + /* Restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Transmit Complete Callback */ + huart->AbortTransmitCpltCallback(huart); +#else + /* Call legacy weak Abort Transmit Complete Callback */ + HAL_UART_AbortTransmitCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA UART Rx communication abort callback, when initiated by user by a call to + * HAL_UART_AbortReceive_IT API (Abort only Rx transfer) + * (This callback is executed at end of DMA Rx Abort procedure following user abort request, + * and leads to user Rx Abort Complete callback execution). + * @param hdma DMA handle. + * @retval None + */ +static void UART_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma) +{ + UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent; + + huart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF | UART_CLEAR_NEF | UART_CLEAR_PEF | UART_CLEAR_FEF); + + /* Discard the received data */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + + /* Restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Call user Abort complete callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Receive Complete Callback */ + huart->AbortReceiveCpltCallback(huart); +#else + /* Call legacy weak Abort Receive Complete Callback */ + HAL_UART_AbortReceiveCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT(UART_HandleTypeDef *huart) +{ + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + if (huart->TxXferCount == 0U) + { + /* Disable the UART Transmit Data Register Empty Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + } + else + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + } +} + +/** + * @brief TX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr & (uint8_t)0xFF); + huart->pTxBuffPtr++; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief TX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Transmit_IT(). + * @param huart UART handle. + * @retval None + */ +static void UART_TxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + const uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if (huart->gState == HAL_UART_STATE_BUSY_TX) + { + for (nb_tx_data = huart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (huart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE); + + /* Enable the UART Transmit Complete Interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + break; /* force exit loop */ + } + else if (READ_BIT(huart->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U) + { + tmp = (const uint16_t *) huart->pTxBuffPtr; + huart->Instance->TDR = (((uint32_t)(*tmp)) & 0x01FFUL); + huart->pTxBuffPtr += 2U; + huart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wrap up transmission in non-blocking mode. + * @param huart pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +static void UART_EndTransmit_IT(UART_HandleTypeDef *huart) +{ + /* Disable the UART Transmit Complete Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE); + + /* Tx process is ended, restore huart->gState to Ready */ + huart->gState = HAL_UART_STATE_READY; + + /* Cleat TxISR function pointer */ + huart->TxISR = NULL; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Tx complete callback*/ + huart->TxCpltCallback(huart); +#else + /*Call legacy weak Tx complete callback*/ + HAL_UART_TxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length . + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupts */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length . + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXNE interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 7 or 8 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_8BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + *huart->pRxBuffPtr = (uint8_t)(uhdata & (uint8_t)uhMask); + huart->pRxBuffPtr++; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + break; + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_8BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief RX interrupt handler for 9 bits data word length and FIFO mode is enabled. + * @note Function is called under interruption only, once + * interruptions have been enabled by HAL_UART_Receive_IT() + * @param huart UART handle. + * @retval None + */ +static void UART_RxISR_16BIT_FIFOEN(UART_HandleTypeDef *huart) +{ + uint16_t *tmp; + uint16_t uhMask = huart->Mask; + uint16_t uhdata; + uint16_t nb_rx_data; + uint16_t rxdatacount; + uint32_t isrflags = READ_REG(huart->Instance->ISR); + uint32_t cr1its = READ_REG(huart->Instance->CR1); + uint32_t cr3its = READ_REG(huart->Instance->CR3); + + /* Check that a Rx process is ongoing */ + if (huart->RxState == HAL_UART_STATE_BUSY_RX) + { + nb_rx_data = huart->NbRxDataToProcess; + while ((nb_rx_data > 0U) && ((isrflags & USART_ISR_RXNE_RXFNE) != 0U)) + { + uhdata = (uint16_t) READ_REG(huart->Instance->RDR); + tmp = (uint16_t *) huart->pRxBuffPtr ; + *tmp = (uint16_t)(uhdata & uhMask); + huart->pRxBuffPtr += 2U; + huart->RxXferCount--; + isrflags = READ_REG(huart->Instance->ISR); + + /* If some non blocking errors occurred */ + if ((isrflags & (USART_ISR_PE | USART_ISR_FE | USART_ISR_NE)) != 0U) + { + /* UART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_PEF); + + huart->ErrorCode |= HAL_UART_ERROR_PE; + } + + /* UART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_FEF); + + huart->ErrorCode |= HAL_UART_ERROR_FE; + } + + /* UART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_NEF); + + huart->ErrorCode |= HAL_UART_ERROR_NE; + } + + /* Call UART Error Call back function if need be ----------------------------*/ + if (huart->ErrorCode != HAL_UART_ERROR_NONE) + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered error callback*/ + huart->ErrorCallback(huart); +#else + /*Call legacy weak error callback*/ + HAL_UART_ErrorCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + huart->ErrorCode = HAL_UART_ERROR_NONE; + } + } + + if (huart->RxXferCount == 0U) + { + /* Disable the UART Parity Error Interrupt and RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Rx process is completed, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + /* Clear RxISR function pointer */ + huart->RxISR = NULL; + + /* Initialize type of RxEvent to Transfer Complete */ + huart->RxEventType = HAL_UART_RXEVENT_TC; + + if (!(IS_LPUART_INSTANCE(huart->Instance))) + { + /* Check that USART RTOEN bit is set */ + if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U) + { + /* Enable the UART Receiver Timeout Interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_RTOIE); + } + } + + /* Check current reception Mode : + If Reception till IDLE event has been selected : */ + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + /* Set reception type to Standard */ + huart->ReceptionType = HAL_UART_RECEPTION_STANDARD; + + /* Disable IDLE interrupt */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET) + { + /* Clear IDLE Flag */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + } + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx Event callback*/ + huart->RxEventCallback(huart, huart->RxXferSize); +#else + /*Call legacy weak Rx Event callback*/ + HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + else + { + /* Standard reception API called */ +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + /*Call registered Rx complete callback*/ + huart->RxCpltCallback(huart); +#else + /*Call legacy weak Rx complete callback*/ + HAL_UART_RxCpltCallback(huart); +#endif /* USE_HAL_UART_REGISTER_CALLBACKS */ + } + break; + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = huart->RxXferCount; + if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess)) + { + /* Disable the UART RXFT interrupt*/ + ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + huart->RxISR = UART_RxISR_16BIT; + + /* Enable the UART Data Register Not Empty interrupt */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_uart_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_uart_ex.c new file mode 100644 index 0000000000..759f9fb421 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_uart_ex.c @@ -0,0 +1,1087 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_uart_ex.c + * @author MCD Application Team + * @brief Extended UART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART). + * + Initialization and de-initialization functions + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### UART peripheral extended features ##### + ============================================================================== + [..] + (#) Declare a UART_HandleTypeDef handle structure. + + (#) For the UART RS485 Driver Enable mode, initialize the UART registers + by calling the HAL_RS485Ex_Init() API. + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When UART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup UARTEx UARTEx + * @brief UART Extended HAL module driver + * @{ + */ + +#ifdef HAL_UART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup UARTEX_Private_Constants UARTEx Private Constants + * @{ + */ +/* UART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* UART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup UARTEx_Private_Functions UARTEx Private Functions + * @{ + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions + * @{ + */ + +/** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Extended Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USARTx or the UARTy + in asynchronous mode. + (+) For the asynchronous mode the parameters below can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) Hardware flow control + (++) Receiver/transmitter modes + (++) Over Sampling Method + (++) One-Bit Sampling Method + (+) For the asynchronous mode, the following advanced features can be configured as well: + (++) TX and/or RX pin level inversion + (++) data logical level inversion + (++) RX and TX pins swap + (++) RX overrun detection disabling + (++) DMA disabling on RX error + (++) MSB first on communication line + (++) auto Baud rate detection + [..] + The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration + procedures (details for the procedures are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible UART formats are listed in the + following table. + + Table 1. UART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | UART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the RS485 Driver enable feature according to the specified + * parameters in the UART_InitTypeDef and creates the associated handle. + * @param huart UART handle. + * @param Polarity Select the driver enable polarity. + * This parameter can be one of the following values: + * @arg @ref UART_DE_POLARITY_HIGH DE signal is active high + * @arg @ref UART_DE_POLARITY_LOW DE signal is active low + * @param AssertionTime Driver Enable assertion time: + * 5-bit value defining the time between the activation of the DE (Driver Enable) + * signal and the beginning of the start bit. It is expressed in sample time + * units (1/8 or 1/16 bit time, depending on the oversampling rate) + * @param DeassertionTime Driver Enable deassertion time: + * 5-bit value defining the time between the end of the last stop bit, in a + * transmitted message, and the de-activation of the DE (Driver Enable) signal. + * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the + * oversampling rate). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, + uint32_t DeassertionTime) +{ + uint32_t temp; + + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + /* Check the Driver Enable UART instance */ + assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance)); + + /* Check the Driver Enable polarity */ + assert_param(IS_UART_DE_POLARITY(Polarity)); + + /* Check the Driver Enable assertion time */ + assert_param(IS_UART_ASSERTIONTIME(AssertionTime)); + + /* Check the Driver Enable deassertion time */ + assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime)); + + if (huart->gState == HAL_UART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + huart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_UART_REGISTER_CALLBACKS == 1) + UART_InitCallbacksToDefault(huart); + + if (huart->MspInitCallback == NULL) + { + huart->MspInitCallback = HAL_UART_MspInit; + } + + /* Init the low level hardware */ + huart->MspInitCallback(huart); +#else + /* Init the low level hardware : GPIO, CLOCK, CORTEX */ + HAL_UART_MspInit(huart); +#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */ + } + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Perform advanced settings configuration */ + /* For some items, configuration requires to be done prior TE and RE bits are set */ + if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT) + { + UART_AdvFeatureConfig(huart); + } + + /* Set the UART Communication parameters */ + if (UART_SetConfig(huart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */ + SET_BIT(huart->Instance->CR3, USART_CR3_DEM); + + /* Set the Driver Enable polarity */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity); + + /* Set the Driver Enable assertion and deassertion times */ + temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS); + temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS); + MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT | USART_CR1_DEAT), temp); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState and huart->RxState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group2 IO operation functions + * @brief Extended functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of Wakeup and FIFO mode related callback functions. + (#) Wakeup from Stop mode Callback: + (++) HAL_UARTEx_WakeupCallback() + (#) TX/RX Fifos Callbacks: + (++) HAL_UARTEx_RxFifoFullCallback() + (++) HAL_UARTEx_TxFifoEmptyCallback() +@endverbatim + * @{ + */ + +/** + * @brief UART wakeup from Stop mode callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_WakeupCallback can be implemented in the user file. + */ +} + +/** + * @brief UART RX Fifo full callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_RxFifoFullCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief UART TX Fifo empty callback. + * @param huart UART handle. + * @retval None + */ +__weak void HAL_UARTEx_TxFifoEmptyCallback(UART_HandleTypeDef *huart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(huart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_UARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address + detection length to more than 4 bits for multiprocessor address mark wake up. + (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode + trigger: address match, Start Bit detection or RXNE bit status. + (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode + (+) HAL_UARTEx_DisableStopMode() API disables the above functionality + (+) HAL_UARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_UARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_UARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_UARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + [..] This subsection also provides a set of additional functions providing enhanced reception + services to user. (For example, these functions allow application to handle use cases + where number of data to be received is unknown). + + (#) Compared to standard reception services which only consider number of received + data elements as reception completion criteria, these functions also consider additional events + as triggers for updating reception status to caller : + (++) Detection of inactivity period (RX line has not been active for a given period). + (+++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state) + for 1 frame time, after last received byte. + (+++) RX inactivity detected by RTO, i.e. line has been in idle state + for a programmable time, after last received byte. + (++) Detection that a specific character has been received. + + (#) There are two modes of transfer: + (++) Blocking mode: The reception is performed in polling mode, until either expected number of data is received, + or till IDLE event occurs. Reception is handled only during function execution. + When function exits, no data reception could occur. HAL status and number of actually received data elements, + are returned by function after finishing transfer. + (++) Non-Blocking mode: The reception is performed using Interrupts or DMA. + These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode. + The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process + The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected. + + (#) Blocking mode API: + (++) HAL_UARTEx_ReceiveToIdle() + + (#) Non-Blocking mode API with Interrupt: + (++) HAL_UARTEx_ReceiveToIdle_IT() + + (#) Non-Blocking mode API with DMA: + (++) HAL_UARTEx_ReceiveToIdle_DMA() + +@endverbatim + * @{ + */ + +/** + * @brief By default in multiprocessor mode, when the wake up method is set + * to address mark, the UART handles only 4-bit long addresses detection; + * this API allows to enable longer addresses detection (6-, 7- or 8-bit + * long). + * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode, + * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode. + * @param huart UART handle. + * @param AddressLength This parameter can be one of the following values: + * @arg @ref UART_ADDRESS_DETECT_4B 4-bit long address + * @arg @ref UART_ADDRESS_DETECT_7B 6-, 7- or 8-bit long address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength) +{ + /* Check the UART handle allocation */ + if (huart == NULL) + { + return HAL_ERROR; + } + + /* Check the address length parameter */ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength)); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength); + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* TEACK and/or REACK to check before moving huart->gState to Ready */ + return (UART_CheckIdleState(huart)); +} + +/** + * @brief Set Wakeup from Stop mode interrupt flag selection. + * @note It is the application responsibility to enable the interrupt used as + * usart_wkup interrupt source before entering low-power mode. + * @param huart UART handle. + * @param WakeUpSelection Address match, Start Bit detection or RXNE/RXFNE bit status. + * This parameter can be one of the following values: + * @arg @ref UART_WAKEUP_ON_ADDRESS + * @arg @ref UART_WAKEUP_ON_STARTBIT + * @arg @ref UART_WAKEUP_ON_READDATA_NONEMPTY + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t tickstart; + + /* check the wake-up from stop mode UART instance */ + assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance)); + /* check the wake-up selection parameter */ + assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_UART_DISABLE(huart); + + /* Set the wake-up selection scheme */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent); + + if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS) + { + UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection); + } + + /* Enable the Peripheral */ + __HAL_UART_ENABLE(huart); + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Wait until REACK flag is set */ + if (UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, tickstart, HAL_UART_TIMEOUT_VALUE) != HAL_OK) + { + status = HAL_TIMEOUT; + } + else + { + /* Initialize the UART State */ + huart->gState = HAL_UART_STATE_READY; + } + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return status; +} + +/** + * @brief Enable UART Stop Mode. + * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Set UESM bit */ + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable UART Stop Mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart) +{ + /* Process Locked */ + __HAL_LOCK(huart); + + /* Clear UESM bit */ + ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM); + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_EnableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_ENABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param huart UART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_DisableFifoMode(UART_HandleTypeDef *huart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Disable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + huart->FifoMode = UART_FIFOMODE_DISABLE; + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param huart UART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_TXFIFO_THRESHOLD_1_8 + * @arg @ref UART_TXFIFO_THRESHOLD_1_4 + * @arg @ref UART_TXFIFO_THRESHOLD_1_2 + * @arg @ref UART_TXFIFO_THRESHOLD_3_4 + * @arg @ref UART_TXFIFO_THRESHOLD_7_8 + * @arg @ref UART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update TX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param huart UART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref UART_RXFIFO_THRESHOLD_1_8 + * @arg @ref UART_RXFIFO_THRESHOLD_1_4 + * @arg @ref UART_RXFIFO_THRESHOLD_1_2 + * @arg @ref UART_RXFIFO_THRESHOLD_3_4 + * @arg @ref UART_RXFIFO_THRESHOLD_7_8 + * @arg @ref UART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(huart->Instance)); + assert_param(IS_UART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(huart); + + huart->gState = HAL_UART_STATE_BUSY; + + /* Save actual UART configuration */ + tmpcr1 = READ_REG(huart->Instance->CR1); + + /* Disable UART */ + __HAL_UART_DISABLE(huart); + + /* Update RX threshold configuration */ + MODIFY_REG(huart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + UARTEx_SetNbDataToProcess(huart); + + /* Restore UART configuration */ + WRITE_REG(huart->Instance->CR1, tmpcr1); + + huart->gState = HAL_UART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(huart); + + return HAL_OK; +} + +/** + * @brief Receive an amount of data in blocking mode till either the expected number of data + * is received or an IDLE event occurs. + * @note HAL_OK is returned if reception is completed (expected number of data has been received) + * or if reception is stopped after IDLE event (less than the expected number of data has been received) + * In this case, RxLen output parameter indicates number of data available in reception buffer. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO + * is not empty. Read operations from the RDR register are performed when + * RXFNE flag is set. From hardware perspective, RXFNE flag and + * RXNE are mapped on the same bit-field. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure proper + * alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @param RxLen Number of data elements finally received + * (could be lower than Size, in case reception ends on IDLE event) + * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, + uint32_t Timeout) +{ + uint8_t *pdata8bits; + uint16_t *pdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + huart->ErrorCode = HAL_UART_ERROR_NONE; + huart->RxState = HAL_UART_STATE_BUSY_RX; + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + huart->RxXferSize = Size; + huart->RxXferCount = Size; + + /* Computation of UART mask to apply to RDR register */ + UART_MASK_COMPUTATION(huart); + uhMask = huart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + pdata8bits = NULL; + pdata16bits = (uint16_t *) pData; + } + else + { + pdata8bits = pData; + pdata16bits = NULL; + } + + /* Initialize output number of received elements */ + *RxLen = 0U; + + /* as long as data have to be received */ + while (huart->RxXferCount > 0U) + { + /* Check if IDLE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE)) + { + /* Clear IDLE flag in ISR */ + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + + /* If Set, but no data ever received, clear flag without exiting loop */ + /* If Set, and data has already been received, this means Idle Event is valid : End reception */ + if (*RxLen > 0U) + { + huart->RxEventType = HAL_UART_RXEVENT_IDLE; + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + } + + /* Check if RXNE flag is set */ + if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE)) + { + if (pdata8bits == NULL) + { + *pdata16bits = (uint16_t)(huart->Instance->RDR & uhMask); + pdata16bits++; + } + else + { + *pdata8bits = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); + pdata8bits++; + } + /* Increment number of received elements */ + *RxLen += 1U; + huart->RxXferCount--; + } + + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) + { + huart->RxState = HAL_UART_STATE_READY; + + return HAL_TIMEOUT; + } + } + } + + /* Set number of received elements in output parameter : RxLen */ + *RxLen = huart->RxXferSize - huart->RxXferCount; + /* At end of Rx process, restore huart->RxState to Ready */ + huart->RxState = HAL_UART_STATE_READY; + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode till either the expected number of data + * is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating + * number of received data elements. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using uint16_t pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data to be received from RDR will be + handled through a uint16_t cast. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + (void)UART_Start_Receive_IT(huart, pData, Size); + + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + + return status; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Receive an amount of data in DMA mode till either the expected number + * of data is received or an IDLE event occurs. + * @note Reception is initiated by this function call. Further progress of reception is achieved thanks + * to DMA services, transferring automatically received data elements in user reception buffer and + * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider + * reception phase as ended. In all cases, callback execution will indicate number of received data elements. + * @note When the UART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of uint16_t. In this case, Size must indicate the number + * of uint16_t available through pData. + * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pData. + * @param huart UART handle. + * @param pData Pointer to data buffer (uint8_t or uint16_t data elements). + * @param Size Amount of data elements (uint8_t or uint16_t) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) +{ + HAL_StatusTypeDef status; + + /* Check that a Rx process is not already ongoing */ + if (huart->RxState == HAL_UART_STATE_READY) + { + if ((pData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pData buffer provided as input parameter + should be aligned on a uint16_t frontier, as data copy from RDR will be + handled by DMA from a uint16_t frontier. */ + if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE)) + { + if ((((uint32_t)pData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Set Reception type to reception till IDLE Event*/ + huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE; + huart->RxEventType = HAL_UART_RXEVENT_TC; + + status = UART_Start_Receive_DMA(huart, pData, Size); + + /* Check Rx process has been successfully started */ + if (status == HAL_OK) + { + if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE) + { + __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF); + ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE); + } + else + { + /* In case of errors already pending when reception is started, + Interrupts may have already been raised and lead to reception abortion. + (Overrun error for instance). + In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */ + status = HAL_ERROR; + } + } + + return status; + } + else + { + return HAL_BUSY; + } +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Provide Rx Event type that has lead to RxEvent callback execution. + * @note When HAL_UARTEx_ReceiveToIdle_IT() or HAL_UARTEx_ReceiveToIdle_DMA() API are called, progress + * of reception process is provided to application through calls of Rx Event callback (either default one + * HAL_UARTEx_RxEventCallback() or user registered one). As several types of events could occur (IDLE event, + * Half Transfer, or Transfer Complete), this function allows to retrieve the Rx Event type that has lead + * to Rx Event callback execution. + * @note This function is expected to be called within the user implementation of Rx Event Callback, + * in order to provide the accurate value. + * @note In Interrupt Mode: + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received). + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed. + * @note In DMA Mode: + * - HAL_UART_RXEVENT_TC : when Reception has been completed (expected nb of data has been received). + * - HAL_UART_RXEVENT_HT : when half of expected nb of data has been received. + * - HAL_UART_RXEVENT_IDLE : when Idle event occurred prior reception has been completed. + * @note In DMA mode, RxEvent callback could be called several times; + * When DMA is configured in Normal Mode, HT event does not stop Reception process; + * When DMA is configured in Circular Mode, HT, TC or IDLE events don't stop Reception process; + * @param huart UART handle. + * @retval Rx Event Type (return vale will be a value of @ref UART_RxEvent_Type_Values) + */ +HAL_UART_RxEventTypeTypeDef HAL_UARTEx_GetRxEventType(const UART_HandleTypeDef *huart) +{ + /* Return Rx Event type value, as stored in UART handle */ + return (huart->RxEventType); +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup UARTEx_Private_Functions + * @{ + */ + +/** + * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection. + * @param huart UART handle. + * @param WakeUpSelection UART wake up from stop mode parameters. + * @retval None + */ +static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection) +{ + assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength)); + + /* Set the USART address length */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength); + + /* Set the USART address node */ + MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS)); +} + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the UART configuration registers. + * @param huart UART handle. + * @retval None + */ +static void UARTEx_SetNbDataToProcess(UART_HandleTypeDef *huart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (huart->FifoMode == UART_FIFOMODE_DISABLE) + { + huart->NbTxDataToProcess = 1U; + huart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos); + tx_fifo_threshold = (uint8_t)(READ_BIT(huart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos); + huart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + huart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_UART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_usart.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_usart.c new file mode 100644 index 0000000000..2037af1d5b --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_usart.c @@ -0,0 +1,3829 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_usart.c + * @author MCD Application Team + * @brief USART HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Universal Synchronous/Asynchronous Receiver Transmitter + * Peripheral (USART). + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The USART HAL driver can be used as follows: + + (#) Declare a USART_HandleTypeDef handle structure (eg. USART_HandleTypeDef husart). + (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit() API: + (++) Enable the USARTx interface clock. + (++) USART pins configuration: + (+++) Enable the clock for the USART GPIOs. + (+++) Configure these USART pins as alternate function pull-up. + (++) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(), + HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs): + (+++) Configure the USARTx interrupt priority. + (+++) Enable the NVIC USART IRQ handle. + (++) USART interrupts handling: + -@@- The specific USART interrupts (Transmission complete interrupt, + RXNE interrupt and Error Interrupts) will be managed using the macros + __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process. + (++) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA() + HAL_USART_Receive_DMA() and HAL_USART_TransmitReceive_DMA() APIs): + (+++) Declare a DMA handle structure for the Tx/Rx channel. + (+++) Enable the DMAx interface clock. + (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters. + (+++) Configure the DMA Tx/Rx channel. + (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle. + (+++) Configure the priority and enable the NVIC for the transfer + complete interrupt on the DMA Tx/Rx channel. + + (#) Program the Baud Rate, Word Length, Stop Bit, Parity, and Mode + (Receiver/Transmitter) in the husart handle Init structure. + + (#) Initialize the USART registers by calling the HAL_USART_Init() API: + (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) + by calling the customized HAL_USART_MspInit(&husart) API. + + [..] + (@) To configure and enable/disable the USART to wake up the MCU from stop mode, resort to UART API's + HAL_UARTEx_StopModeWakeUpSourceConfig(), HAL_UARTEx_EnableStopMode() and + HAL_UARTEx_DisableStopMode() in casting the USART handle to UART type UART_HandleTypeDef. + + ##### Callback registration ##### + ================================== + + [..] + The compilation define USE_HAL_USART_REGISTER_CALLBACKS when set to 1 + allows the user to configure dynamically the driver callbacks. + + [..] + Use Function HAL_USART_RegisterCallback() to register a user callback. + Function HAL_USART_RegisterCallback() allows to register following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) TxRxCpltCallback : Tx Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : USART MspInit. + (+) MspDeInitCallback : USART MspDeInit. + This function takes as parameters the HAL peripheral handle, the Callback ID + and a pointer to the user callback function. + + [..] + Use function HAL_USART_UnRegisterCallback() to reset a callback to the default + weak function. + HAL_USART_UnRegisterCallback() takes as parameters the HAL peripheral handle, + and the Callback ID. + This function allows to reset following callbacks: + (+) TxHalfCpltCallback : Tx Half Complete Callback. + (+) TxCpltCallback : Tx Complete Callback. + (+) RxHalfCpltCallback : Rx Half Complete Callback. + (+) RxCpltCallback : Rx Complete Callback. + (+) TxRxCpltCallback : Tx Rx Complete Callback. + (+) ErrorCallback : Error Callback. + (+) AbortCpltCallback : Abort Complete Callback. + (+) RxFifoFullCallback : Rx Fifo Full Callback. + (+) TxFifoEmptyCallback : Tx Fifo Empty Callback. + (+) MspInitCallback : USART MspInit. + (+) MspDeInitCallback : USART MspDeInit. + + [..] + By default, after the HAL_USART_Init() and when the state is HAL_USART_STATE_RESET + all callbacks are set to the corresponding weak functions: + examples HAL_USART_TxCpltCallback(), HAL_USART_RxHalfCpltCallback(). + Exception done for MspInit and MspDeInit functions that are respectively + reset to the legacy weak functions in the HAL_USART_Init() + and HAL_USART_DeInit() only when these callbacks are null (not registered beforehand). + If not, MspInit or MspDeInit are not null, the HAL_USART_Init() and HAL_USART_DeInit() + keep and use the user MspInit/MspDeInit callbacks (registered beforehand). + + [..] + Callbacks can be registered/unregistered in HAL_USART_STATE_READY state only. + Exception done MspInit/MspDeInit that can be registered/unregistered + in HAL_USART_STATE_READY or HAL_USART_STATE_RESET state, thus registered (user) + MspInit/DeInit callbacks can be used during the Init/DeInit. + In that case first register the MspInit/MspDeInit user callbacks + using HAL_USART_RegisterCallback() before calling HAL_USART_DeInit() + or HAL_USART_Init() function. + + [..] + When The compilation define USE_HAL_USART_REGISTER_CALLBACKS is set to 0 or + not defined, the callback registration feature is not available + and weak callbacks are used. + + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup USART USART + * @brief HAL USART Synchronous SPI module driver + * @{ + */ + +#ifdef HAL_USART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @defgroup USART_Private_Constants USART Private Constants + * @{ + */ +#define USART_DUMMY_DATA ((uint16_t) 0xFFFF) /*!< USART transmitted dummy data */ +#define USART_TEACK_REACK_TIMEOUT 1000U /*!< USART TX or RX enable acknowledge time-out value */ +#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \ + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8 | \ + USART_CR1_FIFOEN )) /*!< USART CR1 fields of parameters set by USART_SetConfig API */ + +#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | \ + USART_CR2_LBCL | USART_CR2_STOP | USART_CR2_SLVEN | \ + USART_CR2_DIS_NSS)) /*!< USART CR2 fields of parameters set by USART_SetConfig API */ + +#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART or USART CR3 fields of parameters set by USART_SetConfig API */ + +#define USART_BRR_MIN 0x10U /* USART BRR minimum authorized value */ +#define USART_BRR_MAX 0xFFFFU /* USART BRR maximum authorized value */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup USART_Private_Functions + * @{ + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +static void USART_EndTransfer(USART_HandleTypeDef *husart); +#if defined(HAL_DMA_MODULE_ENABLED) +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); +static void USART_DMAError(DMA_HandleTypeDef *hdma); +static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma); +static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma); +static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma); +#endif /* HAL_DMA_MODULE_ENABLED */ +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout); +static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart); +static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart); +static void USART_TxISR_8BIT(USART_HandleTypeDef *husart); +static void USART_TxISR_16BIT(USART_HandleTypeDef *husart); +static void USART_TxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_TxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_EndTransmit_IT(USART_HandleTypeDef *husart); +static void USART_RxISR_8BIT(USART_HandleTypeDef *husart); +static void USART_RxISR_16BIT(USART_HandleTypeDef *husart); +static void USART_RxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart); +static void USART_RxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart); + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USART_Exported_Functions USART Exported Functions + * @{ + */ + +/** @defgroup USART_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to initialize the USART + in synchronous SPI master/slave mode. + (+) For the synchronous SPI mode only these parameters can be configured: + (++) Baud Rate + (++) Word Length + (++) Stop Bit + (++) Parity: If the parity is enabled, then the MSB bit of the data written + in the data register is transmitted but is changed by the parity bit. + (++) USART polarity + (++) USART phase + (++) USART LastBit + (++) Receiver/transmitter modes + + [..] + The HAL_USART_Init() function follows the USART synchronous SPI configuration + procedure (details for the procedure are available in reference manual). + +@endverbatim + + Depending on the frame length defined by the M1 and M0 bits (7-bit, + 8-bit or 9-bit), the possible USART formats are listed in the + following table. + + Table 1. USART frame format. + +-----------------------------------------------------------------------+ + | M1 bit | M0 bit | PCE bit | USART frame | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 0 | | SB | 8 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 0 | | SB | 9 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 0 | | SB | 7 bit data | STB | | + |---------|---------|-----------|---------------------------------------| + | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | | + +-----------------------------------------------------------------------+ + + * @{ + */ + +/** + * @brief Initialize the USART mode according to the specified + * parameters in the USART_InitTypeDef and initialize the associated handle. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if (husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + if (husart->State == HAL_USART_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + husart->Lock = HAL_UNLOCKED; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + USART_InitCallbacksToDefault(husart); + + if (husart->MspInitCallback == NULL) + { + husart->MspInitCallback = HAL_USART_MspInit; + } + + /* Init the low level hardware */ + husart->MspInitCallback(husart); +#else + /* Init the low level hardware : GPIO, CLOCK */ + HAL_USART_MspInit(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + + husart->State = HAL_USART_STATE_BUSY; + + /* Disable the Peripheral */ + __HAL_USART_DISABLE(husart); + + /* Set the Usart Communication parameters */ + if (USART_SetConfig(husart) == HAL_ERROR) + { + return HAL_ERROR; + } + + /* In Synchronous SPI mode, the following bits must be kept cleared: + - LINEN bit in the USART_CR2 register + - HDSEL, SCEN and IREN bits in the USART_CR3 register. + */ + husart->Instance->CR2 &= ~USART_CR2_LINEN; + husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN); + + /* Enable the Peripheral */ + __HAL_USART_ENABLE(husart); + + /* TEACK and/or REACK to check before moving husart->State to Ready */ + return (USART_CheckIdleState(husart)); +} + +/** + * @brief DeInitialize the USART peripheral. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart) +{ + /* Check the USART handle allocation */ + if (husart == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_USART_INSTANCE(husart->Instance)); + + husart->State = HAL_USART_STATE_BUSY; + + husart->Instance->CR1 = 0x0U; + husart->Instance->CR2 = 0x0U; + husart->Instance->CR3 = 0x0U; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + if (husart->MspDeInitCallback == NULL) + { + husart->MspDeInitCallback = HAL_USART_MspDeInit; + } + /* DeInit the low level hardware */ + husart->MspDeInitCallback(husart); +#else + /* DeInit the low level hardware */ + HAL_USART_MspDeInit(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_RESET; + + /* Process Unlock */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Initialize the USART MSP. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_MspInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_MspInit can be implemented in the user file + */ +} + +/** + * @brief DeInitialize the USART MSP. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_MspDeInit can be implemented in the user file + */ +} + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +/** + * @brief Register a User USART Callback + * To be used to override the weak predefined callback + * @note The HAL_USART_RegisterCallback() may be called before HAL_USART_Init() in HAL_USART_STATE_RESET + * to register callbacks for HAL_USART_MSPINIT_CB_ID and HAL_USART_MSPDEINIT_CB_ID + * @param husart usart handle + * @param CallbackID ID of the callback to be registered + * This parameter can be one of the following values: + * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_USART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_USART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @param pCallback pointer to the Callback function + * @retval HAL status ++ */ +HAL_StatusTypeDef HAL_USART_RegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID, + pUSART_CallbackTypeDef pCallback) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (pCallback == NULL) + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + return HAL_ERROR; + } + + if (husart->State == HAL_USART_STATE_READY) + { + switch (CallbackID) + { + case HAL_USART_TX_HALFCOMPLETE_CB_ID : + husart->TxHalfCpltCallback = pCallback; + break; + + case HAL_USART_TX_COMPLETE_CB_ID : + husart->TxCpltCallback = pCallback; + break; + + case HAL_USART_RX_HALFCOMPLETE_CB_ID : + husart->RxHalfCpltCallback = pCallback; + break; + + case HAL_USART_RX_COMPLETE_CB_ID : + husart->RxCpltCallback = pCallback; + break; + + case HAL_USART_TX_RX_COMPLETE_CB_ID : + husart->TxRxCpltCallback = pCallback; + break; + + case HAL_USART_ERROR_CB_ID : + husart->ErrorCallback = pCallback; + break; + + case HAL_USART_ABORT_COMPLETE_CB_ID : + husart->AbortCpltCallback = pCallback; + break; + + case HAL_USART_RX_FIFO_FULL_CB_ID : + husart->RxFifoFullCallback = pCallback; + break; + + case HAL_USART_TX_FIFO_EMPTY_CB_ID : + husart->TxFifoEmptyCallback = pCallback; + break; + + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = pCallback; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (husart->State == HAL_USART_STATE_RESET) + { + switch (CallbackID) + { + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = pCallback; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = pCallback; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} + +/** + * @brief Unregister an USART Callback + * USART callaback is redirected to the weak predefined callback + * @note The HAL_USART_UnRegisterCallback() may be called before HAL_USART_Init() in HAL_USART_STATE_RESET + * to un-register callbacks for HAL_USART_MSPINIT_CB_ID and HAL_USART_MSPDEINIT_CB_ID + * @param husart usart handle + * @param CallbackID ID of the callback to be unregistered + * This parameter can be one of the following values: + * @arg @ref HAL_USART_TX_HALFCOMPLETE_CB_ID Tx Half Complete Callback ID + * @arg @ref HAL_USART_TX_COMPLETE_CB_ID Tx Complete Callback ID + * @arg @ref HAL_USART_RX_HALFCOMPLETE_CB_ID Rx Half Complete Callback ID + * @arg @ref HAL_USART_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_TX_RX_COMPLETE_CB_ID Rx Complete Callback ID + * @arg @ref HAL_USART_ERROR_CB_ID Error Callback ID + * @arg @ref HAL_USART_ABORT_COMPLETE_CB_ID Abort Complete Callback ID + * @arg @ref HAL_USART_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID + * @arg @ref HAL_USART_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID + * @arg @ref HAL_USART_MSPINIT_CB_ID MspInit Callback ID + * @arg @ref HAL_USART_MSPDEINIT_CB_ID MspDeInit Callback ID + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_USART_CallbackIDTypeDef CallbackID) +{ + HAL_StatusTypeDef status = HAL_OK; + + if (HAL_USART_STATE_READY == husart->State) + { + switch (CallbackID) + { + case HAL_USART_TX_HALFCOMPLETE_CB_ID : + husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + break; + + case HAL_USART_TX_COMPLETE_CB_ID : + husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + break; + + case HAL_USART_RX_HALFCOMPLETE_CB_ID : + husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + break; + + case HAL_USART_RX_COMPLETE_CB_ID : + husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + break; + + case HAL_USART_TX_RX_COMPLETE_CB_ID : + husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + break; + + case HAL_USART_ERROR_CB_ID : + husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */ + break; + + case HAL_USART_ABORT_COMPLETE_CB_ID : + husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + break; + + case HAL_USART_RX_FIFO_FULL_CB_ID : + husart->RxFifoFullCallback = HAL_USARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + break; + + case HAL_USART_TX_FIFO_EMPTY_CB_ID : + husart->TxFifoEmptyCallback = HAL_USARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ + break; + + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = HAL_USART_MspInit; /* Legacy weak MspInitCallback */ + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = HAL_USART_MspDeInit; /* Legacy weak MspDeInitCallback */ + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else if (HAL_USART_STATE_RESET == husart->State) + { + switch (CallbackID) + { + case HAL_USART_MSPINIT_CB_ID : + husart->MspInitCallback = HAL_USART_MspInit; + break; + + case HAL_USART_MSPDEINIT_CB_ID : + husart->MspDeInitCallback = HAL_USART_MspDeInit; + break; + + default : + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + break; + } + } + else + { + /* Update the error code */ + husart->ErrorCode |= HAL_USART_ERROR_INVALID_CALLBACK; + + /* Return error status */ + status = HAL_ERROR; + } + + return status; +} +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group2 IO operation functions + * @brief USART Transmit and Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] This subsection provides a set of functions allowing to manage the USART synchronous SPI + data transfers. + + [..] The USART Synchronous SPI supports master and slave modes (SCLK as output or input). + + [..] + + (#) There are two modes of transfer: + (++) Blocking mode: The communication is performed in polling mode. + The HAL status of all data processing is returned by the same function + after finishing transfer. + (++) No-Blocking mode: The communication is performed using Interrupts + or DMA, These API's return the HAL status. + The end of the data processing will be indicated through the + dedicated USART IRQ when using Interrupt mode or the DMA IRQ when + using DMA mode. + The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback() user callbacks + will be executed respectively at the end of the transmit or Receive process + The HAL_USART_ErrorCallback()user callback will be executed when a communication error is detected + + (#) Blocking mode API's are : + (++) HAL_USART_Transmit() in simplex mode + (++) HAL_USART_Receive() in full duplex receive only + (++) HAL_USART_TransmitReceive() in full duplex mode + + (#) Non-Blocking mode API's with Interrupt are : + (++) HAL_USART_Transmit_IT() in simplex mode + (++) HAL_USART_Receive_IT() in full duplex receive only + (++) HAL_USART_TransmitReceive_IT() in full duplex mode + (++) HAL_USART_IRQHandler() + + (#) No-Blocking mode API's with DMA are : + (++) HAL_USART_Transmit_DMA() in simplex mode + (++) HAL_USART_Receive_DMA() in full duplex receive only + (++) HAL_USART_TransmitReceive_DMA() in full duplex mode + (++) HAL_USART_DMAPause() + (++) HAL_USART_DMAResume() + (++) HAL_USART_DMAStop() + + (#) A set of Transfer Complete Callbacks are provided in Non_Blocking mode: + (++) HAL_USART_TxCpltCallback() + (++) HAL_USART_RxCpltCallback() + (++) HAL_USART_TxHalfCpltCallback() + (++) HAL_USART_RxHalfCpltCallback() + (++) HAL_USART_ErrorCallback() + (++) HAL_USART_TxRxCpltCallback() + + (#) Non-Blocking mode transfers could be aborted using Abort API's : + (++) HAL_USART_Abort() + (++) HAL_USART_Abort_IT() + + (#) For Abort services based on interrupts (HAL_USART_Abort_IT), a Abort Complete Callbacks is provided: + (++) HAL_USART_AbortCpltCallback() + + (#) In Non-Blocking mode transfers, possible errors are split into 2 categories. + Errors are handled as follows : + (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is + to be evaluated by user : this concerns Frame Error, + Parity Error or Noise Error in Interrupt mode reception . + Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify + error type, and HAL_USART_ErrorCallback() user callback is executed. + Transfer is kept ongoing on USART side. + If user wants to abort it, Abort services should be called by user. + (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted. + This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode. + Error code is set to allow user to identify error type, + and HAL_USART_ErrorCallback() user callback is executed. + +@endverbatim + * @{ + */ + +/** + * @brief Simplex send an amount of data in blocking mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be sent. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size, + uint32_t Timeout) +{ + const uint8_t *ptxdata8bits; + const uint16_t *ptxdata16bits; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + /* In case of 9bits/No Parity transfer, pTxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + ptxdata8bits = NULL; + ptxdata16bits = (const uint16_t *) pTxData; + } + else + { + ptxdata8bits = pTxData; + ptxdata16bits = NULL; + } + + /* Check the remaining data to be sent */ + while (husart->TxXferCount > 0U) + { + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & 0x01FFU); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & 0xFFU); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + /* Clear Transmission Complete Flag */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Clear overrun flag and discard the received data */ + __HAL_USART_CLEAR_OREFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + + /* At end of Tx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in blocking mode. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure + * proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData Pointer to data buffer (u8 or u16 data elements). + * @param Size Amount of data elements (u8 or u16) to be received. + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout) +{ + uint8_t *prxdata8bits; + uint16_t *prxdata16bits; + uint16_t uhMask; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->RxXferSize = Size; + husart->RxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + uhMask = husart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + prxdata8bits = NULL; + prxdata16bits = (uint16_t *) pRxData; + } + else + { + prxdata8bits = pRxData; + prxdata16bits = NULL; + } + + /* as long as data have to be received */ + while (husart->RxXferCount > 0U) + { + if (husart->SlaveMode == USART_SLAVEMODE_DISABLE) + { + /* Wait until TXE flag is set to send dummy byte in order to generate the + * clock for the slave to send data. + * Whatever the frame length (7, 8 or 9-bit long), the same dummy value + * can be written for all the cases. */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x0FF); + } + + /* Wait for RXNE Flag */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if (prxdata8bits == NULL) + { + *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask); + prxdata16bits++; + } + else + { + *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + prxdata8bits++; + } + + husart->RxXferCount--; + + } + + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* At end of Rx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send and Receive an amount of data in blocking mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier + * (16 bits) (as sent/received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure + * proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). + * @param Timeout Timeout duration. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size, uint32_t Timeout) +{ + uint8_t *prxdata8bits; + uint16_t *prxdata16bits; + const uint8_t *ptxdata8bits; + const uint16_t *ptxdata16bits; + uint16_t uhMask; + uint16_t rxdatacount; + uint32_t tickstart; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + husart->RxXferSize = Size; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->RxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + uhMask = husart->Mask; + + /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + prxdata8bits = NULL; + ptxdata8bits = NULL; + ptxdata16bits = (const uint16_t *) pTxData; + prxdata16bits = (uint16_t *) pRxData; + } + else + { + prxdata8bits = pRxData; + ptxdata8bits = pTxData; + ptxdata16bits = NULL; + prxdata16bits = NULL; + } + + if ((husart->TxXferCount == 0x01U) || (husart->SlaveMode == USART_SLAVEMODE_ENABLE)) + { + /* Wait until TXE flag is set to send data */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU)); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + /* Check the remain data to be sent */ + /* rxdatacount is a temporary variable for MISRAC2012-Rule-13.5 */ + rxdatacount = husart->RxXferCount; + while ((husart->TxXferCount > 0U) || (rxdatacount > 0U)) + { + if (husart->TxXferCount > 0U) + { + /* Wait until TXE flag is set to send data */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + if (ptxdata8bits == NULL) + { + husart->Instance->TDR = (uint16_t)(*ptxdata16bits & uhMask); + ptxdata16bits++; + } + else + { + husart->Instance->TDR = (uint8_t)(*ptxdata8bits & (uint8_t)(uhMask & 0xFFU)); + ptxdata8bits++; + } + + husart->TxXferCount--; + } + + if (husart->RxXferCount > 0U) + { + /* Wait for RXNE Flag */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK) + { + return HAL_TIMEOUT; + } + + if (prxdata8bits == NULL) + { + *prxdata16bits = (uint16_t)(husart->Instance->RDR & uhMask); + prxdata16bits++; + } + else + { + *prxdata8bits = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + prxdata8bits++; + } + + husart->RxXferCount--; + } + rxdatacount = husart->RxXferCount; + } + + /* At end of TxRx process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Send an amount of data in interrupt mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier + * (16 bits) (as sent data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure + * proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size) +{ + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + husart->TxISR = NULL; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + /* The USART Error Interrupts: (Frame error, noise error, overrun error) + are not managed by the USART Transmit Process to avoid the overrun interrupt + when the usart mode is configured for transmit and receive "USART_MODE_TX_RX" + to benefit for the frame error and noise interrupts the usart mode should be + configured only for transmit "USART_MODE_TX" */ + + /* Configure Tx interrupt processing */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT_FIFOEN; + } + else + { + husart->TxISR = USART_TxISR_8BIT_FIFOEN; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the TX FIFO threshold interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXFT); + } + else + { + /* Set the Tx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT; + } + else + { + husart->TxISR = USART_TxISR_8BIT; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Transmit Data Register Empty Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TXE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in interrupt mode. + * @note To receive synchronous data, dummy data are simultaneously transmitted. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on a half word frontier + * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure + * proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + uint16_t nb_dummy_data; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data to be received from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->RxISR = NULL; + + USART_MASK_COMPUTATION(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Configure Rx interrupt processing */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->RxISR = USART_RxISR_16BIT_FIFOEN; + } + else + { + husart->RxISR = USART_RxISR_8BIT_FIFOEN; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error interrupt and RX FIFO Threshold interrupt */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + SET_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + } + else + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->RxISR = USART_RxISR_16BIT; + } + else + { + husart->RxISR = USART_RxISR_8BIT; + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Parity Error and Data Register not empty Interrupts */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + } + + if (husart->SlaveMode == USART_SLAVEMODE_DISABLE) + { + /* Send dummy data in order to generate the clock for the Slave to send the next data. + When FIFO mode is disabled only one data must be transferred. + When FIFO mode is enabled data must be transmitted until the RX FIFO reaches its threshold. + */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + for (nb_dummy_data = husart->NbRxDataToProcess ; nb_dummy_data > 0U ; nb_dummy_data--) + { + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + else + { + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Send and Receive an amount of data in interrupt mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier + * (16 bits) (as sent/received data will be handled using u16 pointer cast). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required to ensure + * proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent (same amount to be received). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be + handled through a u16 cast. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->RxXferCount = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + /* Computation of USART mask to apply to RDR register */ + USART_MASK_COMPUTATION(husart); + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + /* Configure TxRx interrupt processing */ + if ((husart->FifoMode == USART_FIFOMODE_ENABLE) && (Size >= husart->NbRxDataToProcess)) + { + /* Set the Rx ISR function pointer according to the data word length */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT_FIFOEN; + husart->RxISR = USART_RxISR_16BIT_FIFOEN; + } + else + { + husart->TxISR = USART_TxISR_8BIT_FIFOEN; + husart->RxISR = USART_RxISR_8BIT_FIFOEN; + } + + /* Process Locked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + if (husart->Init.Parity != USART_PARITY_NONE) + { + /* Enable the USART Parity Error interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the TX and RX FIFO Threshold interrupts */ + SET_BIT(husart->Instance->CR3, (USART_CR3_TXFTIE | USART_CR3_RXFTIE)); + } + else + { + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + husart->TxISR = USART_TxISR_16BIT; + husart->RxISR = USART_RxISR_16BIT; + } + else + { + husart->TxISR = USART_TxISR_8BIT; + husart->RxISR = USART_RxISR_8BIT; + } + + /* Process Locked */ + __HAL_UNLOCK(husart); + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the USART Parity Error and USART Data Register not empty Interrupts */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE); + } + else + { + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + } + + /* Enable the USART Transmit Data Register Empty Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE); + } + + return HAL_OK; + } + else + { + return HAL_BUSY; + } +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief Send an amount of data in DMA mode. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data is handled as a set of u16. In this case, Size must indicate the number + * of u16 provided through pTxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits) + * (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain, + * use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pTxData. + * @param husart USART handle. + * @param pTxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + const uint32_t *tmp; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy into TDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pTxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + husart->TxXferCount = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX; + + if (husart->hdmatx != NULL) + { + /* Set the USART DMA transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the DMA error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Enable the USART transmit DMA channel */ + tmp = (const uint32_t *)&pTxData; + status = HAL_DMA_Start_IT(husart->hdmatx, *(const uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + + if (status == HAL_OK) + { + /* Clear the TC flag in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Receive an amount of data in DMA mode. + * @note When the USART parity is enabled (PCE = 1), the received data contain + * the parity bit (MSB position). + * @note The USART DMA transmit channel must be configured in order to generate the clock for the slave. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the received data is handled as a set of u16. In this case, Size must indicate the number + * of u16 available through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffer for storing data to be received, should be aligned on + * a half word frontier (16 bits) (as received data will be handled by DMA from halfword frontier). + * Depending on compilation chain, use of specific alignment compilation directives or pragmas + * might be required to ensure proper alignment for pRxData. + * @param husart USART handle. + * @param pRxData pointer to data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size) +{ + HAL_StatusTypeDef status = HAL_OK; + uint32_t *tmp = (uint32_t *)&pRxData; + + /* Check that a Rx process is not already ongoing */ + if (husart->State == HAL_USART_STATE_READY) + { + if ((pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pRxData buffer provided as input parameter + should be aligned on a u16 frontier, as data copy from RDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if ((((uint32_t)pRxData) & 1U) != 0U) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pRxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_RX; + + if (husart->hdmarx != NULL) + { + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* Enable the USART receive DMA channel */ + status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t *)tmp, Size); + } + + if ((status == HAL_OK) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Enable the USART transmit DMA channel: the transmit channel is used in order + to generate in the non-blocking mode the clock to the slave device, + this mode isn't a simplex receive mode but a full-duplex receive mode */ + + /* Set the USART DMA Tx Complete and Error callback to Null */ + if (husart->hdmatx != NULL) + { + husart->hdmatx->XferErrorCallback = NULL; + husart->hdmatx->XferHalfCpltCallback = NULL; + husart->hdmatx->XferCpltCallback = NULL; + status = HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + if (husart->Init.Parity != USART_PARITY_NONE) + { + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + if (husart->hdmarx != NULL) + { + status = HAL_DMA_Abort(husart->hdmarx); + } + + /* No need to check on error code */ + UNUSED(status); + + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode. + * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number + * of u16 available through pTxData and through pRxData. + * @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), + * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier + * (16 bits) (as sent/received data will be handled by DMA from halfword frontier). Depending on compilation + * chain, use of specific alignment compilation directives or pragmas might be required + * to ensure proper alignment for pTxData and pRxData. + * @param husart USART handle. + * @param pTxData pointer to TX data buffer (u8 or u16 data elements). + * @param pRxData pointer to RX data buffer (u8 or u16 data elements). + * @param Size amount of data elements (u8 or u16) to be received/sent. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData, + uint16_t Size) +{ + HAL_StatusTypeDef status; + const uint32_t *tmp; + + if (husart->State == HAL_USART_STATE_READY) + { + if ((pTxData == NULL) || (pRxData == NULL) || (Size == 0U)) + { + return HAL_ERROR; + } + + /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter + should be aligned on a u16 frontier, as data copy to/from TDR/RDR will be + handled by DMA from a u16 frontier. */ + if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE)) + { + if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U)) + { + return HAL_ERROR; + } + } + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->pRxBuffPtr = pRxData; + husart->RxXferSize = Size; + husart->pTxBuffPtr = pTxData; + husart->TxXferSize = Size; + + husart->ErrorCode = HAL_USART_ERROR_NONE; + husart->State = HAL_USART_STATE_BUSY_TX_RX; + + if ((husart->hdmarx != NULL) && (husart->hdmatx != NULL)) + { + /* Set the USART DMA Rx transfer complete callback */ + husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt; + + /* Set the USART DMA Tx transfer complete callback */ + husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt; + + /* Set the USART DMA Half transfer complete callback */ + husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt; + + /* Set the USART DMA Tx transfer error callback */ + husart->hdmatx->XferErrorCallback = USART_DMAError; + + /* Set the USART DMA Rx transfer error callback */ + husart->hdmarx->XferErrorCallback = USART_DMAError; + + /* Enable the USART receive DMA channel */ + tmp = (uint32_t *)&pRxData; + status = HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(const uint32_t *)tmp, Size); + + /* Enable the USART transmit DMA channel */ + if (status == HAL_OK) + { + tmp = (const uint32_t *)&pTxData; + status = HAL_DMA_Start_IT(husart->hdmatx, *(const uint32_t *)tmp, (uint32_t)&husart->Instance->TDR, Size); + } + } + else + { + status = HAL_ERROR; + } + + if (status == HAL_OK) + { + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + if (husart->Init.Parity != USART_PARITY_NONE) + { + /* Enable the USART Parity Error Interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + + /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear the TC flag in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_TCF); + + /* Enable the DMA transfer for the receiver request by setting the DMAR bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the DMA transfer for transmit request by setting the DMAT bit + in the USART CR3 register */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + return HAL_OK; + } + else + { + if (husart->hdmarx != NULL) + { + status = HAL_DMA_Abort(husart->hdmarx); + } + + /* No need to check on error code */ + UNUSED(status); + + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + /* Restore husart->State to ready */ + husart->State = HAL_USART_STATE_READY; + + return HAL_ERROR; + } + } + else + { + return HAL_BUSY; + } +} + +/** + * @brief Pause the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Process Locked */ + __HAL_LOCK(husart); + + if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) && + (state == HAL_USART_STATE_BUSY_TX)) + { + /* Disable the USART DMA Tx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the USART DMA Tx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Disable the USART DMA Rx request */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + } + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Resume the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Process Locked */ + __HAL_LOCK(husart); + + if (state == HAL_USART_STATE_BUSY_TX) + { + /* Enable the USART DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + /* Clear the Overrun flag before resuming the Rx transfer*/ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF); + + /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */ + if (husart->Init.Parity != USART_PARITY_NONE) + { + SET_BIT(husart->Instance->CR1, USART_CR1_PEIE); + } + SET_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Enable the USART DMA Rx request before the DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Enable the USART DMA Tx request */ + SET_BIT(husart->Instance->CR3, USART_CR3_DMAT); + } + else + { + /* Nothing to do */ + } + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Stop the DMA Transfer. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart) +{ + /* The Lock is not implemented on this API to allow the user application + to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback() / + HAL_USART_TxHalfCpltCallback / HAL_USART_RxHalfCpltCallback: + indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete + interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of + the stream and the corresponding call back is executed. */ + + /* Disable the USART Tx/Rx DMA requests */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA tx channel */ + if (husart->hdmatx != NULL) + { + if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + /* Abort the USART DMA rx channel */ + if (husart->hdmarx != NULL) + { + if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + + USART_EndTransfer(husart); + husart->State = HAL_USART_STATE_READY; + + return HAL_OK; +} +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Abort ongoing transfers (blocking mode). + * @param husart USART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable USART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode) + * - Set handle State to READY + * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Abort(USART_HandleTypeDef *husart) +{ + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the USART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable the USART DMA Tx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the USART DMA Tx channel : use blocking DMA Abort API (no callback) */ + if (husart->hdmatx != NULL) + { + /* Set the USART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + husart->hdmatx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(husart->hdmatx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmatx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } + + /* Abort the USART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the USART DMA Rx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA Rx channel : use blocking DMA Abort API (no callback) */ + if (husart->hdmarx != NULL) + { + /* Set the USART DMA Abort callback to Null. + No call back execution at end of DMA abort procedure */ + husart->hdmarx->XferAbortCallback = NULL; + + if (HAL_DMA_Abort(husart->hdmarx) != HAL_OK) + { + if (HAL_DMA_GetError(husart->hdmarx) == HAL_DMA_ERROR_TIMEOUT) + { + /* Set error code to DMA */ + husart->ErrorCode = HAL_USART_ERROR_DMA; + + return HAL_TIMEOUT; + } + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* Reset Tx and Rx transfer counters */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Reset Handle ErrorCode to No Error */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + return HAL_OK; +} + +/** + * @brief Abort ongoing transfers (Interrupt mode). + * @param husart USART handle. + * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode. + * This procedure performs following operations : + * - Disable USART Interrupts (Tx and Rx) + * - Disable the DMA transfer in the peripheral register (if enabled) + * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode) + * - Set handle State to READY + * - At abort completion, call user abort complete callback + * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be + * considered as completed only when user abort complete callback is executed (not when exiting function). + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USART_Abort_IT(USART_HandleTypeDef *husart) +{ + uint32_t abortcplt = 1U; + + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* If DMA Tx and/or DMA Rx Handles are associated to USART Handle, DMA Abort complete callbacks should be initialised + before any call to DMA Abort functions */ + /* DMA Tx Handle is valid */ + if (husart->hdmatx != NULL) + { + /* Set DMA Abort Complete callback if USART DMA Tx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + husart->hdmatx->XferAbortCallback = USART_DMATxAbortCallback; + } + else + { + husart->hdmatx->XferAbortCallback = NULL; + } + } + /* DMA Rx Handle is valid */ + if (husart->hdmarx != NULL) + { + /* Set DMA Abort Complete callback if USART DMA Rx request if enabled. + Otherwise, set it to NULL */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + husart->hdmarx->XferAbortCallback = USART_DMARxAbortCallback; + } + else + { + husart->hdmarx->XferAbortCallback = NULL; + } + } + + /* Abort the USART DMA Tx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAT)) + { + /* Disable DMA Tx at USART level */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Abort the USART DMA Tx channel : use non blocking DMA Abort API (callback) */ + if (husart->hdmatx != NULL) + { + /* USART Tx DMA Abort callback has already been initialised : + will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA TX */ + if (HAL_DMA_Abort_IT(husart->hdmatx) != HAL_OK) + { + husart->hdmatx->XferAbortCallback = NULL; + } + else + { + abortcplt = 0U; + } + } + } + + /* Abort the USART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the USART DMA Rx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + + /* Abort the USART DMA Rx channel : use non blocking DMA Abort API (callback) */ + if (husart->hdmarx != NULL) + { + /* USART Rx DMA Abort callback has already been initialised : + will lead to call HAL_USART_AbortCpltCallback() at end of DMA abort procedure */ + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK) + { + husart->hdmarx->XferAbortCallback = NULL; + abortcplt = 1U; + } + else + { + abortcplt = 0U; + } + } + } +#endif /* HAL_DMA_MODULE_ENABLED */ + + /* if no DMA abort complete callback execution is required => call user Abort Complete callback */ + if (abortcplt == 1U) + { + /* Reset Tx and Rx transfer counters */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Flush the whole TX FIFO (if needed) */ + if (husart->FifoMode == USART_FIFOMODE_ENABLE) + { + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Discard the received data */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* As no DMA to be aborted, call directly user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + + return HAL_OK; +} + +/** + * @brief Handle USART interrupt request. + * @param husart USART handle. + * @retval None + */ +void HAL_USART_IRQHandler(USART_HandleTypeDef *husart) +{ + uint32_t isrflags = READ_REG(husart->Instance->ISR); + uint32_t cr1its = READ_REG(husart->Instance->CR1); + uint32_t cr3its = READ_REG(husart->Instance->CR3); + + uint32_t errorflags; + uint32_t errorcode; + + /* If no error occurs */ + errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF | + USART_ISR_UDR)); + if (errorflags == 0U) + { + /* USART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (husart->RxISR != NULL) + { + husart->RxISR(husart); + } + return; + } + } + + /* If some errors occur */ + if ((errorflags != 0U) + && (((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U) + || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U))) + { + /* USART parity error interrupt occurred -------------------------------------*/ + if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_PEF); + + husart->ErrorCode |= HAL_USART_ERROR_PE; + } + + /* USART frame error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_FEF); + + husart->ErrorCode |= HAL_USART_ERROR_FE; + } + + /* USART noise error interrupt occurred --------------------------------------*/ + if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_NEF); + + husart->ErrorCode |= HAL_USART_ERROR_NE; + } + + /* USART Over-Run interrupt occurred -----------------------------------------*/ + if (((isrflags & USART_ISR_ORE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) || + ((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U))) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_OREF); + + husart->ErrorCode |= HAL_USART_ERROR_ORE; + } + + /* USART Receiver Timeout interrupt occurred ---------------------------------*/ + if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U)) + { + __HAL_USART_CLEAR_IT(husart, USART_CLEAR_RTOF); + + husart->ErrorCode |= HAL_USART_ERROR_RTO; + } + + /* USART SPI slave underrun error interrupt occurred -------------------------*/ + if (((isrflags & USART_ISR_UDR) != 0U) && ((cr3its & USART_CR3_EIE) != 0U)) + { + /* Ignore SPI slave underrun errors when reception is going on */ + if (husart->State == HAL_USART_STATE_BUSY_RX) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + return; + } + else + { + __HAL_USART_CLEAR_UDRFLAG(husart); + husart->ErrorCode |= HAL_USART_ERROR_UDR; + } + } + + /* Call USART Error Call back function if need be --------------------------*/ + if (husart->ErrorCode != HAL_USART_ERROR_NONE) + { + /* USART in mode Receiver ---------------------------------------------------*/ + if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U) + && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U) + || ((cr3its & USART_CR3_RXFTIE) != 0U))) + { + if (husart->RxISR != NULL) + { + husart->RxISR(husart); + } + } + + /* If Overrun error occurs, or if any error occurs in DMA mode reception, + consider error as blocking */ + errorcode = husart->ErrorCode & HAL_USART_ERROR_ORE; + if ((HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) || + (errorcode != 0U)) + { + /* Blocking error : transfer is aborted + Set the USART state ready to be able to start again the process, + Disable Interrupts, and disable DMA requests, if ongoing */ + USART_EndTransfer(husart); + +#if defined(HAL_DMA_MODULE_ENABLED) + /* Abort the USART DMA Rx channel if enabled */ + if (HAL_IS_BIT_SET(husart->Instance->CR3, USART_CR3_DMAR)) + { + /* Disable the USART DMA Rx request if enabled */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR | USART_CR3_DMAR); + + /* Abort the USART DMA Tx channel */ + if (husart->hdmatx != NULL) + { + /* Set the USART Tx DMA Abort callback to NULL : no callback + executed at end of DMA abort procedure */ + husart->hdmatx->XferAbortCallback = NULL; + + /* Abort DMA TX */ + (void)HAL_DMA_Abort_IT(husart->hdmatx); + } + + /* Abort the USART DMA Rx channel */ + if (husart->hdmarx != NULL) + { + /* Set the USART Rx DMA Abort callback : + will lead to call HAL_USART_ErrorCallback() at end of DMA abort procedure */ + husart->hdmarx->XferAbortCallback = USART_DMAAbortOnError; + + /* Abort DMA RX */ + if (HAL_DMA_Abort_IT(husart->hdmarx) != HAL_OK) + { + /* Call Directly husart->hdmarx->XferAbortCallback function in case of error */ + husart->hdmarx->XferAbortCallback(husart->hdmarx); + } + } + else + { + /* Call user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } + else +#endif /* HAL_DMA_MODULE_ENABLED */ + { + /* Call user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } + else + { + /* Non Blocking error : transfer could go on. + Error is notified to user through user error callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + } + } + return; + + } /* End if some error occurs */ + + + /* USART in mode Transmitter ------------------------------------------------*/ + if (((isrflags & USART_ISR_TXE_TXFNF) != 0U) + && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U) + || ((cr3its & USART_CR3_TXFTIE) != 0U))) + { + if (husart->TxISR != NULL) + { + husart->TxISR(husart); + } + return; + } + + /* USART in mode Transmitter (transmission end) -----------------------------*/ + if (((isrflags & USART_ISR_TC) != 0U) && ((cr1its & USART_CR1_TCIE) != 0U)) + { + USART_EndTransmit_IT(husart); + return; + } + + /* USART TX Fifo Empty occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U)) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Fifo Empty Callback */ + husart->TxFifoEmptyCallback(husart); +#else + /* Call legacy weak Tx Fifo Empty Callback */ + HAL_USARTEx_TxFifoEmptyCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + return; + } + + /* USART RX Fifo Full occurred ----------------------------------------------*/ + if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U)) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Fifo Full Callback */ + husart->RxFifoFullCallback(husart); +#else + /* Call legacy weak Rx Fifo Full Callback */ + HAL_USARTEx_RxFifoFullCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + return; + } +} + +/** + * @brief Tx Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_TxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Tx Half Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_TxHalfCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE: This function should not be modified, when the callback is needed, + the HAL_USART_RxCpltCallback can be implemented in the user file. + */ +} + +/** + * @brief Rx Half Transfer completed callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_RxHalfCpltCallback can be implemented in the user file + */ +} + +/** + * @brief Tx/Rx Transfers completed callback for the non-blocking process. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_TxRxCpltCallback can be implemented in the user file + */ +} + +/** + * @brief USART error callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_ErrorCallback can be implemented in the user file. + */ +} + +/** + * @brief USART Abort Complete callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USART_AbortCpltCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USART_AbortCpltCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup USART_Exported_Functions_Group4 Peripheral State and Error functions + * @brief USART Peripheral State and Error functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Return the USART handle state + (+) Return the USART handle error code + +@endverbatim + * @{ + */ + + +/** + * @brief Return the USART handle state. + * @param husart pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART handle state + */ +HAL_USART_StateTypeDef HAL_USART_GetState(const USART_HandleTypeDef *husart) +{ + return husart->State; +} + +/** + * @brief Return the USART error code. + * @param husart pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART. + * @retval USART handle Error Code + */ +uint32_t HAL_USART_GetError(const USART_HandleTypeDef *husart) +{ + return husart->ErrorCode; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup USART_Private_Functions USART Private Functions + * @{ + */ + +/** + * @brief Initialize the callbacks to their default values. + * @param husart USART handle. + * @retval none + */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) +void USART_InitCallbacksToDefault(USART_HandleTypeDef *husart) +{ + /* Init the USART Callback settings */ + husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */ + husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */ + husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */ + husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */ + husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */ + husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */ + husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */ + husart->RxFifoFullCallback = HAL_USARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */ + husart->TxFifoEmptyCallback = HAL_USARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */ +} +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +/** + * @brief End ongoing transfer on USART peripheral (following error detection or Transfer completion). + * @param husart USART handle. + * @retval None + */ +static void USART_EndTransfer(USART_HandleTypeDef *husart) +{ + /* Disable TXEIE, TCIE, RXNE, RXFT, TXFT, PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | + USART_CR1_TCIE)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE)); + + /* At end of process, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; +} + +#if defined(HAL_DMA_MODULE_ENABLED) +/** + * @brief DMA USART transmit process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + husart->TxXferCount = 0U; + + if (husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Disable the DMA transfer for transmit request by resetting the DMAT bit + in the USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + } + /* DMA Circular mode */ + else + { + if (husart->State == HAL_USART_STATE_BUSY_TX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Complete Callback */ + husart->TxCpltCallback(husart); +#else + /* Call legacy weak Tx Complete Callback */ + HAL_USART_TxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA USART transmit process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Half Complete Callback */ + husart->TxHalfCpltCallback(husart); +#else + /* Call legacy weak Tx Half Complete Callback */ + HAL_USART_TxHalfCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART receive process complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + /* DMA Normal mode */ + if (HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC)) + { + husart->RxXferCount = 0U; + + /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Disable the DMA RX transfer for the receiver request by resetting the DMAR bit + in USART CR3 register */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAR); + /* similarly, disable the DMA TX transfer that was started to provide the + clock to the slave device */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT); + + if (husart->State == HAL_USART_STATE_BUSY_RX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ + else + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + husart->State = HAL_USART_STATE_READY; + } + /* DMA circular mode */ + else + { + if (husart->State == HAL_USART_STATE_BUSY_RX) + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + /* The USART state is HAL_USART_STATE_BUSY_TX_RX */ + else + { +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + } +} + +/** + * @brief DMA USART receive process half complete callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Half Complete Callback */ + husart->RxHalfCpltCallback(husart); +#else + /* Call legacy weak Rx Half Complete Callback */ + HAL_USART_RxHalfCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART communication error callback. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->RxXferCount = 0U; + husart->TxXferCount = 0U; + USART_EndTransfer(husart); + + husart->ErrorCode |= HAL_USART_ERROR_DMA; + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART communication abort callback, when initiated by HAL services on Error + * (To be called at end of DMA Abort procedure following error occurrence). + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMAAbortOnError(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + husart->RxXferCount = 0U; + husart->TxXferCount = 0U; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Error Callback */ + husart->ErrorCallback(husart); +#else + /* Call legacy weak Error Callback */ + HAL_USART_ErrorCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +/** + * @brief DMA USART Tx communication abort callback, when initiated by user + * (To be called at end of DMA Tx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Rx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMATxAbortCallback(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->hdmatx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (husart->hdmarx != NULL) + { + if (husart->hdmarx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + +} + + +/** + * @brief DMA USART Rx communication abort callback, when initiated by user + * (To be called at end of DMA Rx Abort procedure following user abort request). + * @note When this callback is executed, User Abort complete call back is called only if no + * Abort still ongoing for Tx DMA Handle. + * @param hdma DMA handle. + * @retval None + */ +static void USART_DMARxAbortCallback(DMA_HandleTypeDef *hdma) +{ + USART_HandleTypeDef *husart = (USART_HandleTypeDef *)(hdma->Parent); + + husart->hdmarx->XferAbortCallback = NULL; + + /* Check if an Abort process is still ongoing */ + if (husart->hdmatx != NULL) + { + if (husart->hdmatx->XferAbortCallback != NULL) + { + return; + } + } + + /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */ + husart->TxXferCount = 0U; + husart->RxXferCount = 0U; + + /* Reset errorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Clear the Error flags in the ICR register */ + __HAL_USART_CLEAR_FLAG(husart, USART_CLEAR_OREF | USART_CLEAR_NEF | USART_CLEAR_PEF | USART_CLEAR_FEF); + + /* Restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + + /* Call user Abort complete callback */ +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Abort Complete Callback */ + husart->AbortCpltCallback(husart); +#else + /* Call legacy weak Abort Complete Callback */ + HAL_USART_AbortCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ +} + +#endif /* HAL_DMA_MODULE_ENABLED */ + +/** + * @brief Handle USART Communication Timeout. It waits + * until a flag is no longer in the specified status. + * @param husart USART handle. + * @param Flag Specifies the USART flag to check. + * @param Status the actual Flag status (SET or RESET). + * @param Tickstart Tick start value + * @param Timeout timeout duration. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, + uint32_t Tickstart, uint32_t Timeout) +{ + /* Wait until flag is set */ + while ((__HAL_USART_GET_FLAG(husart, Flag) ? SET : RESET) == Status) + { + /* Check for the Timeout */ + if (Timeout != HAL_MAX_DELAY) + { + if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U)) + { + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_TIMEOUT; + } + } + } + return HAL_OK; +} + +/** + * @brief Configure the USART peripheral. + * @param husart USART handle. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart) +{ + uint32_t tmpreg; + HAL_StatusTypeDef ret = HAL_OK; + uint16_t brrtemp; + uint32_t usartdiv; + + /* Check the parameters */ + assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity)); + assert_param(IS_USART_PHASE(husart->Init.CLKPhase)); + assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit)); + assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate)); + assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength)); + assert_param(IS_USART_STOPBITS(husart->Init.StopBits)); + assert_param(IS_USART_PARITY(husart->Init.Parity)); + assert_param(IS_USART_MODE(husart->Init.Mode)); + assert_param(IS_USART_PRESCALER(husart->Init.ClockPrescaler)); + + /*-------------------------- USART CR1 Configuration -----------------------*/ + /* Clear M, PCE, PS, TE and RE bits and configure + * the USART Word Length, Parity and Mode: + * set the M bits according to husart->Init.WordLength value + * set PCE and PS bits according to husart->Init.Parity value + * set TE and RE bits according to husart->Init.Mode value + * force OVER8 to 1 to allow to reach the maximum speed (Fclock/8) */ + tmpreg = (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8; + MODIFY_REG(husart->Instance->CR1, USART_CR1_FIELDS, tmpreg); + + /*---------------------------- USART CR2 Configuration ---------------------*/ + /* Clear and configure the USART Clock, CPOL, CPHA, LBCL STOP and SLVEN bits: + * set CPOL bit according to husart->Init.CLKPolarity value + * set CPHA bit according to husart->Init.CLKPhase value + * set LBCL bit according to husart->Init.CLKLastBit value (used in USART Synchronous SPI master mode only) + * set STOP[13:12] bits according to husart->Init.StopBits value */ + tmpreg = (uint32_t)(USART_CLOCK_ENABLE); + tmpreg |= (uint32_t)husart->Init.CLKLastBit; + tmpreg |= ((uint32_t)husart->Init.CLKPolarity | (uint32_t)husart->Init.CLKPhase); + tmpreg |= (uint32_t)husart->Init.StopBits; + MODIFY_REG(husart->Instance->CR2, USART_CR2_FIELDS, tmpreg); + + /*-------------------------- USART PRESC Configuration -----------------------*/ + /* Configure + * - USART Clock Prescaler : set PRESCALER according to husart->Init.ClockPrescaler value */ + MODIFY_REG(husart->Instance->PRESC, USART_PRESC_PRESCALER, husart->Init.ClockPrescaler); + + /*-------------------------- USART BRR Configuration -----------------------*/ + /* BRR is filled-up according to OVER8 bit setting which is forced to 1 */ + usartdiv = (uint32_t)(USART_DIV_SAMPLING8(USART_PERIPHCLK, husart->Init.BaudRate, husart->Init.ClockPrescaler)); + + /* USARTDIV must be greater than or equal to 0d16 and smaller than or equal to ffff */ + if ((usartdiv >= USART_BRR_MIN) && (usartdiv <= USART_BRR_MAX)) + { + brrtemp = (uint16_t)(usartdiv & 0xFFF0U); + brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000FU) >> 1U); + husart->Instance->BRR = brrtemp; + } + else + { + ret = HAL_ERROR; + } + + /* Initialize the number of data to process during RX/TX ISR execution */ + husart->NbTxDataToProcess = 1U; + husart->NbRxDataToProcess = 1U; + + /* Clear ISR function pointers */ + husart->RxISR = NULL; + husart->TxISR = NULL; + + return ret; +} + +/** + * @brief Check the USART Idle State. + * @param husart USART handle. + * @retval HAL status + */ +static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart) +{ + uint32_t tickstart; + + /* Initialize the USART ErrorCode */ + husart->ErrorCode = HAL_USART_ERROR_NONE; + + /* Init tickstart for timeout management */ + tickstart = HAL_GetTick(); + + /* Check if the Transmitter is enabled */ + if ((husart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE) + { + /* Wait until TEACK flag is set */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_TEACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + /* Check if the Receiver is enabled */ + if ((husart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE) + { + /* Wait until REACK flag is set */ + if (USART_WaitOnFlagUntilTimeout(husart, USART_ISR_REACK, RESET, tickstart, USART_TEACK_REACK_TIMEOUT) != HAL_OK) + { + /* Timeout occurred */ + return HAL_TIMEOUT; + } + } + + /* Initialize the USART state*/ + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_8BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (husart->TxXferCount == 0U) + { + /* Disable the USART Transmit data register empty interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + else + { + husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF); + husart->pTxBuffPtr++; + husart->TxXferCount--; + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_16BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + const uint16_t *tmp; + + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + if (husart->TxXferCount == 0U) + { + /* Disable the USART Transmit data register empty interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXE); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + } + else + { + tmp = (const uint16_t *) husart->pTxBuffPtr; + husart->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + husart->pTxBuffPtr += 2U; + husart->TxXferCount--; + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_tx_data = husart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (husart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXFT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + + break; /* force exit loop */ + } + else if (__HAL_USART_GET_FLAG(husart, USART_FLAG_TXFNF) == SET) + { + husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr & (uint8_t)0xFF); + husart->pTxBuffPtr++; + husart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Simplex send an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Transmit_IT(). + * @note The USART errors are not managed to avoid the overrun error. + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is 9 bits long. + * @param husart USART handle. + * @retval None + */ +static void USART_TxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + const uint16_t *tmp; + uint16_t nb_tx_data; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_TX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_tx_data = husart->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--) + { + if (husart->TxXferCount == 0U) + { + /* Disable the TX FIFO threshold interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TXFT); + + /* Enable the USART Transmit Complete Interrupt */ + __HAL_USART_ENABLE_IT(husart, USART_IT_TC); + + break; /* force exit loop */ + } + else if (__HAL_USART_GET_FLAG(husart, USART_FLAG_TXFNF) == SET) + { + tmp = (const uint16_t *) husart->pTxBuffPtr; + husart->Instance->TDR = (uint16_t)(*tmp & 0x01FFU); + husart->pTxBuffPtr += 2U; + husart->TxXferCount--; + } + else + { + /* Nothing to do */ + } + } + } +} + +/** + * @brief Wraps up transmission in non-blocking mode. + * @param husart Pointer to a USART_HandleTypeDef structure that contains + * the configuration information for the specified USART module. + * @retval None + */ +static void USART_EndTransmit_IT(USART_HandleTypeDef *husart) +{ + /* Disable the USART Transmit Complete Interrupt */ + __HAL_USART_DISABLE_IT(husart, USART_IT_TC); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + __HAL_USART_DISABLE_IT(husart, USART_IT_ERR); + + /* Clear TxISR function pointer */ + husart->TxISR = NULL; + + if (husart->State == HAL_USART_STATE_BUSY_TX) + { + /* Clear overrun flag and discard the received data */ + __HAL_USART_CLEAR_OREFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + + /* Tx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Complete Callback */ + husart->TxCpltCallback(husart); +#else + /* Call legacy weak Tx Complete Callback */ + HAL_USART_TxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if (husart->RxXferCount == 0U) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } +} + + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_8BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t uhMask = husart->Mask; + uint32_t txftie; + + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + *husart->pRxBuffPtr = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask); + husart->pRxBuffPtr++; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is disabled and when the + * data word length is 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_16BIT(USART_HandleTypeDef *husart) +{ + const HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t *tmp; + uint16_t uhMask = husart->Mask; + uint32_t txftie; + + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + tmp = (uint16_t *) husart->pRxBuffPtr; + *tmp = (uint16_t)(husart->Instance->RDR & uhMask); + husart->pRxBuffPtr += 2U; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt and RXNE interrupt*/ + CLEAR_BIT(husart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_EIE); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is less than 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_8BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t rxdatacount; + uint16_t uhMask = husart->Mask; + uint16_t nb_rx_data; + uint32_t txftie; + + /* Check that a Rx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_rx_data = husart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + if (__HAL_USART_GET_FLAG(husart, USART_FLAG_RXFNE) == SET) + { + *husart->pRxBuffPtr = (uint8_t)(husart->Instance->RDR & (uint8_t)(uhMask & 0xFFU)); + husart->pRxBuffPtr++; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = husart->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < husart->NbRxDataToProcess)) + { + /* Disable the USART RXFT interrupt*/ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + husart->RxISR = USART_RxISR_8BIT; + + /* Enable the USART Data Register Not Empty interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + if ((husart->TxXferCount == 0U) && + (state == HAL_USART_STATE_BUSY_TX_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @brief Simplex receive an amount of data in non-blocking mode. + * @note Function called under interruption only, once + * interruptions have been enabled by HAL_USART_Receive_IT(). + * @note ISR function executed when FIFO mode is enabled and when the + * data word length is 9 bits long. + * @param husart USART handle + * @retval None + */ +static void USART_RxISR_16BIT_FIFOEN(USART_HandleTypeDef *husart) +{ + HAL_USART_StateTypeDef state = husart->State; + uint16_t txdatacount; + uint16_t rxdatacount; + uint16_t *tmp; + uint16_t uhMask = husart->Mask; + uint16_t nb_rx_data; + uint32_t txftie; + + /* Check that a Tx process is ongoing */ + if ((state == HAL_USART_STATE_BUSY_RX) || + (state == HAL_USART_STATE_BUSY_TX_RX)) + { + for (nb_rx_data = husart->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--) + { + if (__HAL_USART_GET_FLAG(husart, USART_FLAG_RXFNE) == SET) + { + tmp = (uint16_t *) husart->pRxBuffPtr; + *tmp = (uint16_t)(husart->Instance->RDR & uhMask); + husart->pRxBuffPtr += 2U; + husart->RxXferCount--; + + if (husart->RxXferCount == 0U) + { + /* Disable the USART Parity Error Interrupt */ + CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE); + + /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) + and RX FIFO Threshold interrupt */ + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE)); + + /* Clear RxISR function pointer */ + husart->RxISR = NULL; + + /* txftie and txdatacount are temporary variables for MISRAC2012-Rule-13.5 */ + txftie = READ_BIT(husart->Instance->CR3, USART_CR3_TXFTIE); + txdatacount = husart->TxXferCount; + + if (state == HAL_USART_STATE_BUSY_RX) + { + /* Clear SPI slave underrun flag and discard transmit data */ + if (husart->SlaveMode == USART_SLAVEMODE_ENABLE) + { + __HAL_USART_CLEAR_UDRFLAG(husart); + __HAL_USART_SEND_REQ(husart, USART_TXDATA_FLUSH_REQUEST); + } + + /* Rx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Rx Complete Callback */ + husart->RxCpltCallback(husart); +#else + /* Call legacy weak Rx Complete Callback */ + HAL_USART_RxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else if ((READ_BIT(husart->Instance->CR1, USART_CR1_TCIE) != USART_CR1_TCIE) && + (txftie != USART_CR3_TXFTIE) && + (txdatacount == 0U)) + { + /* TxRx process is completed, restore husart->State to Ready */ + husart->State = HAL_USART_STATE_READY; + state = HAL_USART_STATE_READY; + +#if (USE_HAL_USART_REGISTER_CALLBACKS == 1) + /* Call registered Tx Rx Complete Callback */ + husart->TxRxCpltCallback(husart); +#else + /* Call legacy weak Tx Rx Complete Callback */ + HAL_USART_TxRxCpltCallback(husart); +#endif /* USE_HAL_USART_REGISTER_CALLBACKS */ + } + else + { + /* Nothing to do */ + } + } + else if ((state == HAL_USART_STATE_BUSY_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + else + { + /* Nothing to do */ + } + } + } + + /* When remaining number of bytes to receive is less than the RX FIFO + threshold, next incoming frames are processed as if FIFO mode was + disabled (i.e. one interrupt per received frame). + */ + rxdatacount = husart->RxXferCount; + if (((rxdatacount != 0U)) && (rxdatacount < husart->NbRxDataToProcess)) + { + /* Disable the USART RXFT interrupt*/ + CLEAR_BIT(husart->Instance->CR3, USART_CR3_RXFTIE); + + /* Update the RxISR function pointer */ + husart->RxISR = USART_RxISR_16BIT; + + /* Enable the USART Data Register Not Empty interrupt */ + SET_BIT(husart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE); + + if ((husart->TxXferCount == 0U) && + (state == HAL_USART_STATE_BUSY_TX_RX) && + (husart->SlaveMode == USART_SLAVEMODE_DISABLE)) + { + /* Send dummy byte in order to generate the clock for the Slave to Send the next data */ + husart->Instance->TDR = (USART_DUMMY_DATA & (uint16_t)0x00FF); + } + } + } + else + { + /* Clear RXNE interrupt flag */ + __HAL_USART_SEND_REQ(husart, USART_RXDATA_FLUSH_REQUEST); + } +} + +/** + * @} + */ + +#endif /* HAL_USART_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_usart_ex.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_usart_ex.c new file mode 100644 index 0000000000..d26787e907 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_hal_usart_ex.c @@ -0,0 +1,540 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_usart_ex.c + * @author MCD Application Team + * @brief Extended USART HAL module driver. + * This file provides firmware functions to manage the following extended + * functionalities of the Universal Synchronous Receiver Transmitter Peripheral (USART). + * + Peripheral Control functions + * + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### USART peripheral extended features ##### + ============================================================================== + + (#) FIFO mode enabling/disabling and RX/TX FIFO threshold programming. + + -@- When USART operates in FIFO mode, FIFO mode must be enabled prior + starting RX/TX transfers. Also RX/TX FIFO thresholds must be + configured prior starting RX/TX transfers. + + (#) Slave mode enabling/disabling and NSS pin configuration. + + -@- When USART operates in Slave mode, Slave mode must be enabled prior + starting RX/TX transfers. + + @endverbatim + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_hal.h" + +/** @addtogroup STM32WL3x_HAL_Driver + * @{ + */ + +/** @defgroup USARTEx USARTEx + * @brief USART Extended HAL module driver + * @{ + */ + +#ifdef HAL_USART_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/** @defgroup USARTEx_Private_Constants USARTEx Private Constants + * @{ + */ +/* USART RX FIFO depth */ +#define RX_FIFO_DEPTH 8U + +/* USART TX FIFO depth */ +#define TX_FIFO_DEPTH 8U +/** + * @} + */ + +/* Private define ------------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup USARTEx_Private_Functions USARTEx Private Functions + * @{ + */ +static void USARTEx_SetNbDataToProcess(USART_HandleTypeDef *husart); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ + +/** @defgroup USARTEx_Exported_Functions USARTEx Exported Functions + * @{ + */ + +/** @defgroup USARTEx_Exported_Functions_Group1 IO operation functions + * @brief Extended USART Transmit/Receive functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + This subsection provides a set of FIFO mode related callback functions. + + (#) TX/RX Fifos Callbacks: + (+) HAL_USARTEx_RxFifoFullCallback() + (+) HAL_USARTEx_TxFifoEmptyCallback() + +@endverbatim + * @{ + */ + +/** + * @brief USART RX Fifo full callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USARTEx_RxFifoFullCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USARTEx_RxFifoFullCallback can be implemented in the user file. + */ +} + +/** + * @brief USART TX Fifo empty callback. + * @param husart USART handle. + * @retval None + */ +__weak void HAL_USARTEx_TxFifoEmptyCallback(USART_HandleTypeDef *husart) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(husart); + + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_USARTEx_TxFifoEmptyCallback can be implemented in the user file. + */ +} + +/** + * @} + */ + +/** @defgroup USARTEx_Exported_Functions_Group2 Peripheral Control functions + * @brief Extended Peripheral Control functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] This section provides the following functions: + (+) HAL_USARTEx_EnableSPISlaveMode() API enables the SPI slave mode + (+) HAL_USARTEx_DisableSPISlaveMode() API disables the SPI slave mode + (+) HAL_USARTEx_ConfigNSS API configures the Slave Select input pin (NSS) + (+) HAL_USARTEx_EnableFifoMode() API enables the FIFO mode + (+) HAL_USARTEx_DisableFifoMode() API disables the FIFO mode + (+) HAL_USARTEx_SetTxFifoThreshold() API sets the TX FIFO threshold + (+) HAL_USARTEx_SetRxFifoThreshold() API sets the RX FIFO threshold + + +@endverbatim + * @{ + */ + +/** + * @brief Enable the SPI slave mode. + * @note When the USART operates in SPI slave mode, it handles data flow using + * the serial interface clock derived from the external SCLK signal + * provided by the external master SPI device. + * @note In SPI slave mode, the USART must be enabled before starting the master + * communications (or between frames while the clock is stable). Otherwise, + * if the USART slave is enabled while the master is in the middle of a + * frame, it will become desynchronized with the master. + * @note The data register of the slave needs to be ready before the first edge + * of the communication clock or before the end of the ongoing communication, + * otherwise the SPI slave will transmit zeros. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_EnableSlaveMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* In SPI slave mode mode, the following bits must be kept cleared: + - LINEN and CLKEN bit in the USART_CR2 register + - HDSEL, SCEN and IREN bits in the USART_CR3 register.*/ + CLEAR_BIT(husart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); + CLEAR_BIT(husart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); + + /* Enable SPI slave mode */ + SET_BIT(husart->Instance->CR2, USART_CR2_SLVEN); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->SlaveMode = USART_SLAVEMODE_ENABLE; + + husart->State = HAL_USART_STATE_READY; + + /* Enable USART */ + __HAL_USART_ENABLE(husart); + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Disable the SPI slave mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_DisableSlaveMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Disable SPI slave mode */ + CLEAR_BIT(husart->Instance->CR2, USART_CR2_SLVEN); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->SlaveMode = USART_SLAVEMODE_DISABLE; + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Configure the Slave Select input pin (NSS). + * @note Software NSS management: SPI slave will always be selected and NSS + * input pin will be ignored. + * @note Hardware NSS management: the SPI slave selection depends on NSS + * input pin. The slave is selected when NSS is low and deselected when + * NSS is high. + * @param husart USART handle. + * @param NSSConfig NSS configuration. + * This parameter can be one of the following values: + * @arg @ref USART_NSS_HARD + * @arg @ref USART_NSS_SOFT + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_ConfigNSS(USART_HandleTypeDef *husart, uint32_t NSSConfig) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_SPI_SLAVE_INSTANCE(husart->Instance)); + assert_param(IS_USART_NSS(NSSConfig)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Program DIS_NSS bit in the USART_CR2 register */ + MODIFY_REG(husart->Instance->CR2, USART_CR2_DIS_NSS, NSSConfig); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Enable the FIFO mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_EnableFifoMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Enable FIFO mode */ + SET_BIT(tmpcr1, USART_CR1_FIFOEN); + husart->FifoMode = USART_FIFOMODE_ENABLE; + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Disable the FIFO mode. + * @param husart USART handle. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_DisableFifoMode(USART_HandleTypeDef *husart) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Disable FIFO mode */ + CLEAR_BIT(tmpcr1, USART_CR1_FIFOEN); + husart->FifoMode = USART_FIFOMODE_DISABLE; + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Set the TXFIFO threshold. + * @param husart USART handle. + * @param Threshold TX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref USART_TXFIFO_THRESHOLD_1_8 + * @arg @ref USART_TXFIFO_THRESHOLD_1_4 + * @arg @ref USART_TXFIFO_THRESHOLD_1_2 + * @arg @ref USART_TXFIFO_THRESHOLD_3_4 + * @arg @ref USART_TXFIFO_THRESHOLD_7_8 + * @arg @ref USART_TXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_SetTxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + assert_param(IS_USART_TXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Update TX threshold configuration */ + MODIFY_REG(husart->Instance->CR3, USART_CR3_TXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @brief Set the RXFIFO threshold. + * @param husart USART handle. + * @param Threshold RX FIFO threshold value + * This parameter can be one of the following values: + * @arg @ref USART_RXFIFO_THRESHOLD_1_8 + * @arg @ref USART_RXFIFO_THRESHOLD_1_4 + * @arg @ref USART_RXFIFO_THRESHOLD_1_2 + * @arg @ref USART_RXFIFO_THRESHOLD_3_4 + * @arg @ref USART_RXFIFO_THRESHOLD_7_8 + * @arg @ref USART_RXFIFO_THRESHOLD_8_8 + * @retval HAL status + */ +HAL_StatusTypeDef HAL_USARTEx_SetRxFifoThreshold(USART_HandleTypeDef *husart, uint32_t Threshold) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_UART_FIFO_INSTANCE(husart->Instance)); + assert_param(IS_USART_RXFIFO_THRESHOLD(Threshold)); + + /* Process Locked */ + __HAL_LOCK(husart); + + husart->State = HAL_USART_STATE_BUSY; + + /* Save actual USART configuration */ + tmpcr1 = READ_REG(husart->Instance->CR1); + + /* Disable USART */ + __HAL_USART_DISABLE(husart); + + /* Update RX threshold configuration */ + MODIFY_REG(husart->Instance->CR3, USART_CR3_RXFTCFG, Threshold); + + /* Determine the number of data to process during RX/TX ISR execution */ + USARTEx_SetNbDataToProcess(husart); + + /* Restore USART configuration */ + WRITE_REG(husart->Instance->CR1, tmpcr1); + + husart->State = HAL_USART_STATE_READY; + + /* Process Unlocked */ + __HAL_UNLOCK(husart); + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup USARTEx_Private_Functions + * @{ + */ + +/** + * @brief Calculate the number of data to process in RX/TX ISR. + * @note The RX FIFO depth and the TX FIFO depth is extracted from + * the USART configuration registers. + * @param husart USART handle. + * @retval None + */ +static void USARTEx_SetNbDataToProcess(USART_HandleTypeDef *husart) +{ + uint8_t rx_fifo_depth; + uint8_t tx_fifo_depth; + uint8_t rx_fifo_threshold; + uint8_t tx_fifo_threshold; + /* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */ + static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U}; + static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U}; + + if (husart->FifoMode == USART_FIFOMODE_DISABLE) + { + husart->NbTxDataToProcess = 1U; + husart->NbRxDataToProcess = 1U; + } + else + { + rx_fifo_depth = RX_FIFO_DEPTH; + tx_fifo_depth = TX_FIFO_DEPTH; + rx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3, + USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos) & 0xFFU); + tx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3, + USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos) & 0xFFU); + husart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / + (uint16_t)denominator[tx_fifo_threshold]; + husart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / + (uint16_t)denominator[rx_fifo_threshold]; + } +} +/** + * @} + */ + +#endif /* HAL_USART_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_adc.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_adc.c new file mode 100644 index 0000000000..4a88375edd --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_adc.c @@ -0,0 +1,502 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_adc.c + * @author GPM Application Team + * @brief ADC LL module driver + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_adc.h" +#include "stm32wl3x_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (ADC1) + +/** @addtogroup ADC_LL ADC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup ADC_LL_Private_Constants + * @{ + */ + +#define ADC_SWITCH_SE_VIN_ALL (ADC_SWITCH_SE_VIN_0 | ADC_SWITCH_SE_VIN_1 | \ + ADC_SWITCH_SE_VIN_2 | ADC_SWITCH_SE_VIN_3 | \ + ADC_SWITCH_SE_VIN_4 | ADC_SWITCH_SE_VIN_5 | \ + ADC_SWITCH_SE_VIN_6 | ADC_SWITCH_SE_VIN_7) + +#define ADC_SEQ_1_SEQ_ALL (ADC_SEQ_1_SEQ0 | ADC_SEQ_1_SEQ1 | \ + ADC_SEQ_1_SEQ2 | ADC_SEQ_1_SEQ3 | \ + ADC_SEQ_1_SEQ4 | ADC_SEQ_1_SEQ5 | \ + ADC_SEQ_1_SEQ6 | ADC_SEQ_1_SEQ7) + +#define ADC_SEQ_2_SEQ_ALL (ADC_SEQ_2_SEQ8 | ADC_SEQ_2_SEQ9 | \ + ADC_SEQ_2_SEQ10 | ADC_SEQ_2_SEQ11 | \ + ADC_SEQ_2_SEQ12 | ADC_SEQ_2_SEQ13 | \ + ADC_SEQ_2_SEQ14 | ADC_SEQ_2_SEQ15) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup ADC_LL_Private_Macros + * @{ + */ +/* Check of parameters for configuration of ADC hierarchical scope: */ +/* ADC instance. */ +#define IS_LL_ADC_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1UL)) && ((__LENGTH__) <= (16UL))) + +#define IS_LL_ADC_DATAWIDTH(__DATA_WIDTH__) (((__DATA_WIDTH__) == LL_ADC_DS_DATA_WIDTH_12_BIT) || \ + ((__DATA_WIDTH__) == LL_ADC_DS_DATA_WIDTH_13_BIT) || \ + ((__DATA_WIDTH__) == LL_ADC_DS_DATA_WIDTH_14_BIT) || \ + ((__DATA_WIDTH__) == LL_ADC_DS_DATA_WIDTH_15_BIT) || \ + ((__DATA_WIDTH__) == LL_ADC_DS_DATA_WIDTH_16_BIT) ) + +#define IS_LL_ADC_DATARATIO(__DATA_RATIO__) (((__DATA_RATIO__) == LL_ADC_DS_RATIO_1) || \ + ((__DATA_RATIO__) == LL_ADC_DS_RATIO_2) || \ + ((__DATA_RATIO__) == LL_ADC_DS_RATIO_4) || \ + ((__DATA_RATIO__) == LL_ADC_DS_RATIO_8) || \ + ((__DATA_RATIO__) == LL_ADC_DS_RATIO_16) || \ + ((__DATA_RATIO__) == LL_ADC_DS_RATIO_32) || \ + ((__DATA_RATIO__) == LL_ADC_DS_RATIO_64) || \ + ((__DATA_RATIO__) == LL_ADC_DS_RATIO_128) ) + +#define IS_LL_ADC_OVERRUN(__OVR__) (((__OVR__) == LL_ADC_NEW_DATA_IS_LOST) || \ + ((__OVR__) == LL_ADC_NEW_DATA_IS_KEPT) ) + +#define IS_LL_ADC_SAMPLINGMODE(__SAMPLING_MODE__) (((__SAMPLING_MODE__) == LL_ADC_SAMPLING_AT_START) || \ + ((__SAMPLING_MODE__) == LL_ADC_SAMPLING_AT_END) ) + +#define IS_LL_ADC_SAMPLERATE(__SAMPLERATE__) (((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_16) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_20) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_24) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_28) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_32) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_36) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_40) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_44) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_48) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_52) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_56) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_60) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_64) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_68) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_72) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_76) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_80) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_84) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_88) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_92) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_96) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_100) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_104) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_108) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_112) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_116) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_120) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_124) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_128) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_132) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_136) || \ + ((__SAMPLERATE__) == LL_ADC_SAMPLE_RATE_140) ) + +#define IS_LL_ADC_RANK(__RANK__) (((__RANK__) == LL_ADC_RANK_1 ) || \ + ((__RANK__) == LL_ADC_RANK_2 ) || \ + ((__RANK__) == LL_ADC_RANK_3 ) || \ + ((__RANK__) == LL_ADC_RANK_4 ) || \ + ((__RANK__) == LL_ADC_RANK_5 ) || \ + ((__RANK__) == LL_ADC_RANK_6 ) || \ + ((__RANK__) == LL_ADC_RANK_7 ) || \ + ((__RANK__) == LL_ADC_RANK_8 ) || \ + ((__RANK__) == LL_ADC_RANK_9 ) || \ + ((__RANK__) == LL_ADC_RANK_10) || \ + ((__RANK__) == LL_ADC_RANK_11) || \ + ((__RANK__) == LL_ADC_RANK_12) || \ + ((__RANK__) == LL_ADC_RANK_13) || \ + ((__RANK__) == LL_ADC_RANK_14) || \ + ((__RANK__) == LL_ADC_RANK_15) || \ + ((__RANK__) == LL_ADC_RANK_16) ) + +#define IS_LL_ADC_VOLTAGE_RANGE(__VOLTAGE_RANGE__) (((__VOLTAGE_RANGE__) == LL_ADC_VIN_RANGE_1V2) || \ + ((__VOLTAGE_RANGE__) == LL_ADC_VIN_RANGE_2V4) || \ + ((__VOLTAGE_RANGE__) == LL_ADC_VIN_RANGE_3V6) ) + +#define IS_LL_ADC_CHANNEL(__CHANNEL__) (((__CHANNEL__) == LL_ADC_CHANNEL_VINM0) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINM1) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINM2) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINM3) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINP0) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINP1) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINP2) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINP3) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINP0_VINM0) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINP1_VINM1) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINP2_VINM2) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VINP3_VINM3) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_VBAT) || \ + ((__CHANNEL__) == LL_ADC_CHANNEL_TEMPSENSOR) ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup ADC_LL_EF_Init + * @{ + */ + +/** + * @brief Initialize some features of ADC instance. + * @note These parameters have an impact on ADC scope: ADC instance. + * Refer to corresponding unitary functions into + * @ref ADC_LL_EF_Configuration_ADC. + * @note The setting of these parameters by function @ref LL_ADC_Init() + * is conditioned to ADC state: + * ADC instance must be disabled. + * This condition is applied to all ADC features, for efficiency + * and compatibility over all STM32 families. However, the different + * features can be set under different ADC state conditions + * (setting possible with ADC enabled without conversion on going, + * ADC enabled with conversion on going, ...) + * Each feature can be updated afterwards with a unitary function + * and potentially with ADC in a different state than disabled, + * refer to description of each function for setting + * conditioned to ADC state. + * @param ADCx ADC instance + * @param pADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are initialized + * - ERROR: ADC registers are not initialized + */ +ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, const LL_ADC_InitTypeDef *pADC_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + assert_param(IS_LL_ADC_NB_CONV(pADC_InitStruct->SequenceLength)); + assert_param(IS_LL_ADC_SAMPLINGMODE(pADC_InitStruct->SamplingMode)); + assert_param(IS_LL_ADC_SAMPLERATE(pADC_InitStruct->SampleRate)); + assert_param(IS_LL_ADC_OVERRUN(pADC_InitStruct->Overrun)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* ADC instance must be disabled. */ + if (LL_ADC_IsEnabled(ADCx) == 0UL) + { + /* Configuration of ADC hierarchical scope: */ + /* - ADC instance */ + /* - Set ADC continuous mode */ + /* - Set ADC sequence length */ + /* - Set ADC sampling mode */ + /* - Set ADC sample rate */ + /* - Set ADC overrun */ + MODIFY_REG(ADCx->CONF, (ADC_CONF_SAMPLE_RATE_MSB + | ADC_CONF_SAMPLE_RATE + | ADC_CONF_ADC_CONT_1V2 + | ADC_CONF_OVR_DS_CFG + | ADC_CONF_SEQ_LEN + | ADC_CONF_CONT), + (pADC_InitStruct->SampleRate + | pADC_InitStruct->SamplingMode + | pADC_InitStruct->Overrun + | ((pADC_InitStruct->SequenceLength - 1UL) << ADC_CONF_SEQ_LEN_Pos) + | pADC_InitStruct->ContinuousConvMode)); + } + else + { + /* Initialization error: ADC instance is not disabled. */ + status = ERROR; + } + + return status; +} + +/** + * @brief De-initialize registers of the selected ADC instance + * to their default reset values. + * @note If this functions returns error status, it means that ADC instance + * is in an unknown state. + * In this case, perform a hard reset using high level + * clock source RCC ADC reset. + * @param ADCx ADC instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ADC registers are de-initialized + * - ERROR: ADC registers are not de-initialized + */ +ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) +{ + ErrorStatus status = SUCCESS; + + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + + /* ========== Reset ADC registers ========== */ + /* Reset register IER */ + LL_ADC_DisableIT(ADCx, (LL_ADC_IRQ_EN_OVRDS +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + | LL_ADC_IRQ_EN_OVRFL + | LL_ADC_IRQ_EN_EODF +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + | LL_ADC_IRQ_EN_AWD1 + | LL_ADC_IRQ_EN_EOS + | LL_ADC_IRQ_EN_EODS)); + + /* Reset register ISR */ + LL_ADC_ClearActiveFlags(ADCx, (LL_ADC_IRQ_FLAG_OVRDS +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + | LL_ADC_IRQ_FLAG_OVRFL + | LL_ADC_IRQ_FLAG_OVRDF + | LL_ADC_IRQ_FLAG_EODF +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + | LL_ADC_IRQ_FLAG_AWD1 + | LL_ADC_IRQ_FLAG_EOC + | LL_ADC_IRQ_FLAG_EOS + | LL_ADC_IRQ_FLAG_EODS)); + + /* Reset all the registers */ + CLEAR_BIT(ADCx->CONF, (ADC_CONF_BIT_INVERT_DIFF +#if defined(ADC_CONF_SAMPLE_RATE_MSB) + | ADC_CONF_SAMPLE_RATE_MSB +#endif /* ADC_CONF_SAMPLE_RATE_MSB */ + | ADC_CONF_OVR_DS_CFG | ADC_CONF_DMA_DS_ENA + | ADC_CONF_SAMPLE_RATE + | ADC_CONF_SMPS_SYNCHRO_ENA + | ADC_CONF_SEQ_LEN + | ADC_CONF_CONT +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + | ADC_CONF_VBIAS_PRECH_FORCE + | ADC_CONF_OVR_DF_CFG | ADC_CONF_DMA_DF_ENA + | ADC_CONF_OP_MODE +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + )); + + SET_BIT(ADCx->CONF, (ADC_CONF_ADC_CONT_1V2 | ADC_CONF_BIT_INVERT_SN | ADC_CONF_SEQUENCE)); + + CLEAR_BIT(ADCx->CTRL, (ADC_CTRL_STOP_OP_MODE | ADC_CTRL_START_CONV | ADC_CTRL_ADC_ON_OFF)); + +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + CLEAR_BIT(ADCx->OCM_CTRL, (ADC_OCM_CTRL_OCM_ENA | ADC_OCM_CTRL_OCM_SRC)); + + CLEAR_BIT(ADCx->PGA_CONF, (ADC_PGA_CONF_PGA_BIAS | ADC_PGA_CONF_PGA_GAIN)); +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + + CLEAR_BIT(ADCx->SWITCH, (ADC_SWITCH_SE_VIN_7 | ADC_SWITCH_SE_VIN_6 + | ADC_SWITCH_SE_VIN_5 | ADC_SWITCH_SE_VIN_4 + | ADC_SWITCH_SE_VIN_3 | ADC_SWITCH_SE_VIN_2 + | ADC_SWITCH_SE_VIN_1 | ADC_SWITCH_SE_VIN_0)); + +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + CLEAR_BIT(ADCx->DF_CONF, (ADC_DF_CONF_DF_HALF_D_EN + | ADC_DF_CONF_DF_HPF_EN | ADC_DF_CONF_DF_MICROL_RN + | ADC_DF_CONF_PDM_RATE + | ADC_DF_CONF_DF_O_S2U + | ADC_DF_CONF_DF_I_U2S | ADC_DF_CONF_DF_ITP1P2 + | ADC_DF_CONF_DF_CIC_DHF | ADC_DF_CONF_DF_CIC_DEC_FACTOR)); + + SET_BIT(ADCx->DF_CONF, (ADC_DF_CONF_PDM_RATE_1 | ADC_DF_CONF_PDM_RATE_2)); +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + + CLEAR_BIT(ADCx->DS_CONF, (ADC_DS_CONF_DS_WIDTH | ADC_DS_CONF_DS_RATIO)); + + CLEAR_BIT(ADCx->SEQ_1, (ADC_SEQ_1_SEQ7 | ADC_SEQ_1_SEQ6 + | ADC_SEQ_1_SEQ5 | ADC_SEQ_1_SEQ4 + | ADC_SEQ_1_SEQ3 | ADC_SEQ_1_SEQ2 + | ADC_SEQ_1_SEQ1 | ADC_SEQ_1_SEQ0)); + + CLEAR_BIT(ADCx->SEQ_2, (ADC_SEQ_2_SEQ15 | ADC_SEQ_2_SEQ14 + | ADC_SEQ_2_SEQ13 | ADC_SEQ_2_SEQ12 + | ADC_SEQ_2_SEQ11 | ADC_SEQ_2_SEQ10 + | ADC_SEQ_2_SEQ9 | ADC_SEQ_2_SEQ8)); + + MODIFY_REG(ADCx->COMP_1, (ADC_COMP_1_OFFSET1 | ADC_COMP_1_GAIN1), 0x555UL); + MODIFY_REG(ADCx->COMP_2, (ADC_COMP_1_OFFSET1 | ADC_COMP_1_GAIN1), 0x555UL); + MODIFY_REG(ADCx->COMP_3, (ADC_COMP_1_OFFSET1 | ADC_COMP_1_GAIN1), 0x555UL); + MODIFY_REG(ADCx->COMP_4, (ADC_COMP_1_OFFSET1 | ADC_COMP_1_GAIN1), 0x555UL); + + CLEAR_BIT(ADCx->COMP_SEL, (ADC_COMP_SEL_OFFSET_GAIN8 | ADC_COMP_SEL_OFFSET_GAIN7 + | ADC_COMP_SEL_OFFSET_GAIN6 | ADC_COMP_SEL_OFFSET_GAIN5 + | ADC_COMP_SEL_OFFSET_GAIN4 | ADC_COMP_SEL_OFFSET_GAIN3 + | ADC_COMP_SEL_OFFSET_GAIN2 | ADC_COMP_SEL_OFFSET_GAIN1 + | ADC_COMP_SEL_OFFSET_GAIN0)); + + MODIFY_REG(ADCx->WD_TH, (ADC_WD_TH_WD_HT | ADC_WD_TH_WD_LT), ADC_WD_TH_WD_HT); + + CLEAR_BIT(ADCx->WD_CONF, (ADC_WD_CONF_AWD_CHX)); + + CLEAR_BIT(ADCx->IRQ_STATUS, (ADC_IRQ_STATUS_OVR_DS_IRQ + | ADC_IRQ_STATUS_AWD_IRQ + | ADC_IRQ_STATUS_EOS_IRQ + | ADC_IRQ_STATUS_EODS_IRQ + | ADC_IRQ_STATUS_EOC_IRQ +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + | ADC_IRQ_STATUS_DF_OVRFL_IRQ + | ADC_IRQ_STATUS_OVR_DF_IRQ + | ADC_IRQ_STATUS_EODF_IRQ +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + )); + + CLEAR_BIT(ADCx->IRQ_ENABLE, (ADC_IRQ_ENABLE_OVR_DS_IRQ_ENA + | ADC_IRQ_ENABLE_AWD_IRQ_ENA + | ADC_IRQ_ENABLE_EOS_IRQ_ENA + | ADC_IRQ_ENABLE_EODS_IRQ_ENA + | ADC_IRQ_ENABLE_EOC_IRQ_ENA +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + | ADC_IRQ_ENABLE_DF_OVRFL_IRQ_ENA + | ADC_IRQ_ENABLE_OVR_DF_IRQ_ENA + | ADC_IRQ_ENABLE_EODF_IRQ_ENA +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + )); + +#if defined(ADC_SUPPORT_AUDIO_FEATURES) + LL_ADC_SetVbiasPrechargeDelay(ADCx, 0x96UL); +#endif /* ADC_SUPPORT_AUDIO_FEATURES */ + + return status; +} + + +/** + * @brief Configure the input voltage range for all the inputs. + * @param ADCx ADC instance + * @param pVoltRange_InitStruct pointer to a @ref LL_ADC_VoltRangeInitTypeDef structure + * that contains the voltage range for all the inputs. + * @retval None + */ +ErrorStatus LL_ADC_VoltageRangeInit(ADC_TypeDef *ADCx, const LL_ADC_VoltRangeInitTypeDef *pVoltRange_InitStruct) +{ + ErrorStatus status = SUCCESS; + uint32_t tmpval = 0; + + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + assert_param(IS_LL_ADC_VOLTAGE_RANGE(pVoltRange_InitStruct->InputVinm0_Vinp0Vinm0)); + assert_param(IS_LL_ADC_VOLTAGE_RANGE(pVoltRange_InitStruct->InputVinm1_Vinp1Vinm1)); + assert_param(IS_LL_ADC_VOLTAGE_RANGE(pVoltRange_InitStruct->InputVinm2_Vinp2Vinm2)); + assert_param(IS_LL_ADC_VOLTAGE_RANGE(pVoltRange_InitStruct->InputVinm3_Vinp3Vinm3)); + assert_param(IS_LL_ADC_VOLTAGE_RANGE(pVoltRange_InitStruct->InputVinp0)); + assert_param(IS_LL_ADC_VOLTAGE_RANGE(pVoltRange_InitStruct->InputVinp1)); + assert_param(IS_LL_ADC_VOLTAGE_RANGE(pVoltRange_InitStruct->InputVinp2)); + assert_param(IS_LL_ADC_VOLTAGE_RANGE(pVoltRange_InitStruct->InputVinp3)); + + tmpval |= (pVoltRange_InitStruct->InputVinm0_Vinp0Vinm0); + tmpval |= (pVoltRange_InitStruct->InputVinm1_Vinp1Vinm1) << ADC_SWITCH_SE_VIN_1_Pos; + tmpval |= (pVoltRange_InitStruct->InputVinm2_Vinp2Vinm2) << ADC_SWITCH_SE_VIN_2_Pos; + tmpval |= (pVoltRange_InitStruct->InputVinm3_Vinp3Vinm3) << ADC_SWITCH_SE_VIN_3_Pos; + tmpval |= (pVoltRange_InitStruct->InputVinp0) << ADC_SWITCH_SE_VIN_4_Pos; + tmpval |= (pVoltRange_InitStruct->InputVinp1) << ADC_SWITCH_SE_VIN_5_Pos; + tmpval |= (pVoltRange_InitStruct->InputVinp2) << ADC_SWITCH_SE_VIN_6_Pos; + tmpval |= (pVoltRange_InitStruct->InputVinp3) << ADC_SWITCH_SE_VIN_7_Pos; + + MODIFY_REG(ADCx->SWITCH, ADC_SWITCH_SE_VIN_ALL, tmpval); + + return (status); +} + +/** + * @brief Configure the channels for the conversion sequence. + * @param ADCx ADC instance + * @param pSequence_InitStruct pointer to a @ref LL_ADC_SequenceInitTypeDef structure + * that contains the channel codes for the conversion sequence. + * @retval ErrorStatus + */ +ErrorStatus LL_ADC_SequenceInit(ADC_TypeDef *ADCx, const LL_ADC_SequenceInitTypeDef *pSequence_InitStruct) +{ + ErrorStatus status = SUCCESS; + uint32_t tmpval = 0; + + assert_param(IS_ADC_ALL_INSTANCE(ADCx)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq0)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq1)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq2)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq3)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq4)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq5)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq6)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq7)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq8)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq9)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq10)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq11)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq12)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq13)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq14)); + assert_param(IS_LL_ADC_CHANNEL(pSequence_InitStruct->ChannelForSeq15)); + + tmpval |= (pSequence_InitStruct->ChannelForSeq0) << ADC_SEQ_1_SEQ0_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq1) << ADC_SEQ_1_SEQ1_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq2) << ADC_SEQ_1_SEQ2_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq3) << ADC_SEQ_1_SEQ3_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq4) << ADC_SEQ_1_SEQ4_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq5) << ADC_SEQ_1_SEQ5_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq6) << ADC_SEQ_1_SEQ6_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq7) << ADC_SEQ_1_SEQ7_Pos; + + MODIFY_REG(ADCx->SEQ_1, ADC_SEQ_1_SEQ_ALL, tmpval); + + tmpval = 0; + + tmpval |= (pSequence_InitStruct->ChannelForSeq8) << ADC_SEQ_2_SEQ8_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq9) << ADC_SEQ_2_SEQ9_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq10) << ADC_SEQ_2_SEQ10_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq11) << ADC_SEQ_2_SEQ11_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq12) << ADC_SEQ_2_SEQ12_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq13) << ADC_SEQ_2_SEQ13_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq14) << ADC_SEQ_2_SEQ14_Pos; + tmpval |= (pSequence_InitStruct->ChannelForSeq15) << ADC_SEQ_2_SEQ15_Pos; + + MODIFY_REG(ADCx->SEQ_2, ADC_SEQ_2_SEQ_ALL, tmpval); + + return (status); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* ADC1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_comp.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_comp.c new file mode 100644 index 0000000000..ead16daf39 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_comp.c @@ -0,0 +1,276 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_comp.c + * @author MCD Application Team + * @brief COMP LL module driver + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_comp.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (COMP1) + +/** @addtogroup COMP_LL COMP + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup COMP_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of COMP hierarchical scope: */ +/* COMP instance. */ + +#define IS_LL_COMP_POWER_MODE(__POWER_MODE__) \ + (((__POWER_MODE__) == LL_COMP_POWERMODE_HIGHSPEED) \ + || ((__POWER_MODE__) == LL_COMP_POWERMODE_MEDIUMSPEED) \ + || ((__POWER_MODE__) == LL_COMP_POWERMODE_ULTRALOWPOWER) \ + ) + +/* Note: On this series, comparator input plus parameters are */ +/* the same on all COMP instances. */ +/* However, comparator instance kept as macro parameter for */ +/* compatibility with other families. */ +#if defined(LL_COMP_INPUT_PLUS_IO1) +#define IS_LL_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) \ + (((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO1) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO2) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO3) \ + ) +#else +#define IS_LL_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) \ + (((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO2) \ + || ((__INPUT_PLUS__) == LL_COMP_INPUT_PLUS_IO3) \ + ) +#endif /* LL_COMP_INPUT_PLUS_IO1 */ + +/* Note: On this series, comparator input minus parameters are */ +/* the same on all COMP instances. */ +/* However, comparator instance kept as macro parameter for */ +/* compatibility with other families. */ +#if defined(LL_COMP_INPUT_MINUS_IO2) +#define IS_LL_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) \ + (((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_2VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_3_4VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH1) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO1) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO2) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO3) \ + ) +#else +#define IS_LL_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) \ + (((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_4VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_1_2VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_3_4VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_VREFINT) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_DAC1_CH1) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO1) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO2) \ + || ((__INPUT_MINUS__) == LL_COMP_INPUT_MINUS_IO3) \ + ) +#endif /* LL_COMP_INPUT_MINUS_IO2 */ + +#define IS_LL_COMP_INPUT_HYSTERESIS(__INPUT_HYSTERESIS__) \ + (((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_NONE) \ + || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_LOW) \ + || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_MEDIUM) \ + || ((__INPUT_HYSTERESIS__) == LL_COMP_HYSTERESIS_HIGH) \ + ) + +#define IS_LL_COMP_OUTPUT_POLARITY(__POLARITY__) \ + (((__POLARITY__) == LL_COMP_OUTPUTPOL_NONINVERTED) \ + || ((__POLARITY__) == LL_COMP_OUTPUTPOL_INVERTED) \ + ) + +#define IS_LL_COMP_OUTPUT_BLANKING_SOURCE(__OUTPUT_BLANKING_SOURCE__) \ + (((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_NONE) \ + || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM2_OC4) \ + || ((__OUTPUT_BLANKING_SOURCE__) == LL_COMP_BLANKINGSRC_TIM16_OC1) \ + ) + +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup COMP_LL_Exported_Functions + * @{ + */ + +/** @addtogroup COMP_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of the selected COMP instance + * to their default reset values. + * @note If comparator is locked, de-initialization by software is + * not possible. + * The only way to unlock the comparator is a device hardware reset. + * @param COMPx COMP instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: COMP registers are de-initialized + * - ERROR: COMP registers are not de-initialized + */ +ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_COMP_ALL_INSTANCE(COMPx)); + + /* Note: Hardware constraint (refer to description of this function): */ + /* COMP instance must not be locked. */ + if (LL_COMP_IsLocked(COMPx) == 0UL) + { + LL_COMP_WriteReg(COMPx, CSR, 0x00000000UL); + + } + else + { + /* Comparator instance is locked: de-initialization by software is */ + /* not possible. */ + /* The only way to unlock the comparator is a device hardware reset. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize some features of COMP instance. + * @note This function configures features of the selected COMP instance. + * Some features are also available at scope COMP common instance + * (common to several COMP instances). + * Refer to functions having argument "COMPxy_COMMON" as parameter. + * @param COMPx COMP instance + * @param COMP_InitStruct Pointer to a @ref LL_COMP_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: COMP registers are initialized + * - ERROR: COMP registers are not initialized + */ +ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, const LL_COMP_InitTypeDef *COMP_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_COMP_ALL_INSTANCE(COMPx)); + assert_param(IS_LL_COMP_POWER_MODE(COMP_InitStruct->PowerMode)); + assert_param(IS_LL_COMP_INPUT_PLUS(COMPx, COMP_InitStruct->InputPlus)); + assert_param(IS_LL_COMP_INPUT_MINUS(COMPx, COMP_InitStruct->InputMinus)); + assert_param(IS_LL_COMP_INPUT_HYSTERESIS(COMP_InitStruct->InputHysteresis)); + assert_param(IS_LL_COMP_OUTPUT_POLARITY(COMP_InitStruct->OutputPolarity)); + assert_param(IS_LL_COMP_OUTPUT_BLANKING_SOURCE(COMP_InitStruct->OutputBlankingSource)); + + /* Note: Hardware constraint (refer to description of this function) */ + /* COMP instance must not be locked. */ + if (LL_COMP_IsLocked(COMPx) == 0UL) + { + /* Configuration of comparator instance : */ + /* - PowerMode */ + /* - InputPlus */ + /* - InputMinus */ + /* - InputHysteresis */ + /* - OutputPolarity */ + /* - OutputBlankingSource */ + MODIFY_REG(COMPx->CSR, + COMP_CSR_PWRMODE + | COMP_CSR_INPSEL + | COMP_CSR_SCALEN + | COMP_CSR_BRGEN + | COMP_CSR_INMSEL + | COMP_CSR_HYST + | COMP_CSR_POLARITY + | COMP_CSR_BLANKING + , + COMP_InitStruct->PowerMode + | COMP_InitStruct->InputPlus + | COMP_InitStruct->InputMinus + | COMP_InitStruct->InputHysteresis + | COMP_InitStruct->OutputPolarity + | COMP_InitStruct->OutputBlankingSource + ); + + } + else + { + /* Initialization error: COMP instance is locked. */ + status = ERROR; + } + + return status; +} + +/** + * @brief Set each @ref LL_COMP_InitTypeDef field to default value. + * @param COMP_InitStruct Pointer to a @ref LL_COMP_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct) +{ + /* Set COMP_InitStruct fields to default values */ + COMP_InitStruct->PowerMode = LL_COMP_POWERMODE_ULTRALOWPOWER; +#if defined(LL_COMP_INPUT_PLUS_IO1) + COMP_InitStruct->InputPlus = LL_COMP_INPUT_PLUS_IO1; +#else + COMP_InitStruct->InputPlus = LL_COMP_INPUT_PLUS_IO2; +#endif /* LL_COMP_INPUT_PLUS_IO1 */ + COMP_InitStruct->InputMinus = LL_COMP_INPUT_MINUS_VREFINT; + COMP_InitStruct->InputHysteresis = LL_COMP_HYSTERESIS_NONE; + COMP_InitStruct->OutputPolarity = LL_COMP_OUTPUTPOL_NONINVERTED; + COMP_InitStruct->OutputBlankingSource = LL_COMP_BLANKINGSRC_NONE; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* COMP1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_crc.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_crc.c new file mode 100644 index 0000000000..c6207bd55d --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_crc.c @@ -0,0 +1,103 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_crc.c + * @author MCD Application Team + * @brief CRC LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_crc.h" +#include "stm32wl3x_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (CRC) + +/** @addtogroup CRC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup CRC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup CRC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize CRC registers (Registers restored to their default values). + * @param CRCx CRC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: CRC registers are de-initialized + * - ERROR: CRC registers are not de-initialized + */ +ErrorStatus LL_CRC_DeInit(const CRC_TypeDef *CRCx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_CRC_ALL_INSTANCE(CRCx)); + + if (CRCx == CRC) + { + /* Force CRC reset */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_CRC); + + /* Release CRC reset */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_CRC); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (CRC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_dac.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_dac.c new file mode 100644 index 0000000000..55db240963 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_dac.c @@ -0,0 +1,258 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_dac.c + * @author MCD Application Team + * @brief DAC LL module driver + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_dac.h" +#include "stm32wl3x_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(DAC1) + +/** @addtogroup DAC_LL DAC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup DAC_LL_Private_Macros + * @{ + */ +#define IS_LL_DAC_CHANNEL(__DACX__, __DAC_CHANNEL__) \ + (((__DAC_CHANNEL__) == LL_DAC_CHANNEL_1)) + +#define IS_LL_DAC_TRIGGER_SOURCE(__TRIGGER_SOURCE__) \ + (((__TRIGGER_SOURCE__) == LL_DAC_TRIG_SOFTWARE) \ + || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_TIM16_TRGO) \ + || ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_EXTI_LINE8) \ + ) + +#define IS_LL_DAC_WAVE_AUTO_GENER_MODE(__WAVE_AUTO_GENERATION_MODE__) \ + (((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NONE) \ + || ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NOISE) \ + || ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE) \ + ) + +#define IS_LL_DAC_WAVE_AUTO_GENER_CONFIG(__WAVE_AUTO_GENERATION_MODE__, __WAVE_AUTO_GENERATION_CONFIG__) \ + ( (((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NOISE) \ + && (((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BIT0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS1_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS2_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS3_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS4_0) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS5_0)) \ + ) \ + ||(((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE) \ + && (((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_1) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_3) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_7) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_15) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_31) \ + || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_63)) \ + ) \ + ) + +#define IS_LL_DAC_OUTPUT_BUFFER(__OUTPUT_BUFFER__) \ + (((__OUTPUT_BUFFER__) == LL_DAC_OUTPUT_BUFFER_ENABLE) \ + || ((__OUTPUT_BUFFER__) == LL_DAC_OUTPUT_BUFFER_DISABLE) \ + ) + +#define IS_LL_DAC_OUTPUT_CONNECTION(__OUTPUT_CONNECTION__) \ + (((__OUTPUT_CONNECTION__) == LL_DAC_OUTPUT_CONNECT_GPIO) \ + || ((__OUTPUT_CONNECTION__) == LL_DAC_OUTPUT_CONNECT_INTERNAL) \ + ) +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DAC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DAC_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize registers of the selected DAC instance + * to their default reset values. + * @param DACx DAC instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DAC registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_DAC_DeInit(const DAC_TypeDef *DACx) +{ + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(DACx)); + + /* Force reset of DAC clock */ + LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_DAC); + + /* Release reset of DAC clock */ + LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_DAC); + + return SUCCESS; +} + +/** + * @brief Initialize some features of DAC channel. + * @note @ref LL_DAC_Init() aims to ease basic configuration of a DAC channel. + * Leaving it ready to be enabled and output: + * a level by calling one of + * @ref LL_DAC_ConvertData12RightAligned + * @ref LL_DAC_ConvertData12LeftAligned + * @ref LL_DAC_ConvertData8RightAligned + * or one of the supported autogenerated wave. + * @note This function allows configuration of: + * - Output mode + * - Trigger + * - Wave generation + * @note The setting of these parameters by function @ref LL_DAC_Init() + * is conditioned to DAC state: + * DAC channel must be disabled. + * @param DACx DAC instance + * @param DAC_Channel This parameter can be one of the following values: + * @arg @ref LL_DAC_CHANNEL_1 + * @param DAC_InitStruct Pointer to a @ref LL_DAC_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: DAC registers are initialized + * - ERROR: DAC registers are not initialized + */ +ErrorStatus LL_DAC_Init(DAC_TypeDef *DACx, uint32_t DAC_Channel, const LL_DAC_InitTypeDef *DAC_InitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_DAC_ALL_INSTANCE(DACx)); + assert_param(IS_LL_DAC_CHANNEL(DACx, DAC_Channel)); + assert_param(IS_LL_DAC_TRIGGER_SOURCE(DAC_InitStruct->TriggerSource)); + assert_param(IS_LL_DAC_OUTPUT_BUFFER(DAC_InitStruct->OutputBuffer)); + assert_param(IS_LL_DAC_OUTPUT_CONNECTION(DAC_InitStruct->OutputConnection)); + assert_param(IS_LL_DAC_WAVE_AUTO_GENER_MODE(DAC_InitStruct->WaveAutoGeneration)); + if (DAC_InitStruct->WaveAutoGeneration != LL_DAC_WAVE_AUTO_GENERATION_NONE) + { + assert_param(IS_LL_DAC_WAVE_AUTO_GENER_CONFIG(DAC_InitStruct->WaveAutoGeneration, + DAC_InitStruct->WaveAutoGenerationConfig)); + } + + /* Note: Hardware constraint (refer to description of this function) */ + /* DAC instance must be disabled. */ + if (LL_DAC_IsEnabled(DACx, DAC_Channel) == 0UL) + { + /* Configuration of DAC channel: */ + /* - TriggerSource */ + /* - WaveAutoGeneration */ + /* - OutputBuffer */ + /* - OutputConnection */ + /* - OutputMode */ + if (DAC_InitStruct->WaveAutoGeneration != LL_DAC_WAVE_AUTO_GENERATION_NONE) + { + MODIFY_REG(DACx->CR, + (DAC_CR_TSEL + | DAC_CR_WAVE + | DAC_CR_MAMP + | DAC_CR_BON + ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + , + (DAC_InitStruct->TriggerSource + | DAC_InitStruct->WaveAutoGeneration + | DAC_InitStruct->WaveAutoGenerationConfig + | DAC_InitStruct->OutputBuffer + | DAC_InitStruct->OutputConnection + ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); + } + else + { + MODIFY_REG(DACx->CR, + (DAC_CR_TSEL + | DAC_CR_WAVE + | DAC_CR_MAMP + | DAC_CR_BON + ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + , + (DAC_InitStruct->TriggerSource + | LL_DAC_WAVE_AUTO_GENERATION_NONE + | DAC_InitStruct->OutputBuffer + | DAC_InitStruct->OutputConnection + ) << (DAC_Channel & DAC_CR_CHX_BITOFFSET_MASK) + ); + } + } + else + { + /* Initialization error: DAC instance is not disabled. */ + status = ERROR; + } + return status; +} + +/** + * @brief Set each @ref LL_DAC_InitTypeDef field to default value. + * @param DAC_InitStruct pointer to a @ref LL_DAC_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct) +{ + /* Set DAC_InitStruct fields to default values */ + DAC_InitStruct->TriggerSource = LL_DAC_TRIG_SOFTWARE; + DAC_InitStruct->WaveAutoGeneration = LL_DAC_WAVE_AUTO_GENERATION_NONE; + /* Note: Parameter discarded if wave auto generation is disabled, */ + /* set anyway to its default value. */ + DAC_InitStruct->WaveAutoGenerationConfig = LL_DAC_NOISE_LFSR_UNMASK_BIT0; + DAC_InitStruct->OutputBuffer = LL_DAC_OUTPUT_BUFFER_ENABLE; + DAC_InitStruct->OutputConnection = LL_DAC_OUTPUT_CONNECT_GPIO; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DAC1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_dma.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_dma.c new file mode 100644 index 0000000000..031ca26799 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_dma.c @@ -0,0 +1,330 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_dma.c + * @author MCD Application Team + * @brief DMA LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_dma.h" +#include "stm32wl3x_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (DMA1) + +/** @defgroup DMA_LL DMA + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup DMA_LL_Private_Macros + * @{ + */ +#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \ + ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY)) + +#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \ + ((__VALUE__) == LL_DMA_MODE_CIRCULAR)) + +#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \ + ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT)) + +#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \ + ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT)) + +#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_PDATAALIGN_WORD)) + +#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \ + ((__VALUE__) == LL_DMA_MDATAALIGN_WORD)) + +#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) + +#define IS_LL_DMA_PERIPHREQUEST(__VALUE__) ((__VALUE__) <= 40U) + +#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \ + ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \ + ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \ + ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH)) + +#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \ + (((CHANNEL) == LL_DMA_CHANNEL_1) || \ + ((CHANNEL) == LL_DMA_CHANNEL_2) || \ + ((CHANNEL) == LL_DMA_CHANNEL_3) || \ + ((CHANNEL) == LL_DMA_CHANNEL_4) || \ + ((CHANNEL) == LL_DMA_CHANNEL_5) || \ + ((CHANNEL) == LL_DMA_CHANNEL_6) || \ + ((CHANNEL) == LL_DMA_CHANNEL_7) || \ + ((CHANNEL) == LL_DMA_CHANNEL_8)))) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DMA_LL_Exported_Functions + * @{ + */ + +/** @addtogroup DMA_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the DMA registers to their default reset values. + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @arg @ref LL_DMA_CHANNEL_ALL + * @retval ErrorStatus + * - SUCCESS: DMA registers are de-initialized + * - ERROR: DMA registers are not de-initialized + */ +ErrorStatus LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel) +{ + DMA_Channel_TypeDef *tmp; + ErrorStatus status = SUCCESS; + + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel) || (Channel == LL_DMA_CHANNEL_ALL)); + + if (Channel == LL_DMA_CHANNEL_ALL) + { + if (DMAx == DMA1) + { + /* Force reset of DMA clock */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA); + + /* Release reset of DMA clock */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA); + } + else + { + status = ERROR; + } + } + else + { + tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Reset DMAx_Channely control register */ + WRITE_REG(tmp->CCR, 0U); + + /* Reset DMAx_Channely remaining bytes register */ + WRITE_REG(tmp->CNDTR, 0U); + + /* Reset DMAx_Channely peripheral address register */ + WRITE_REG(tmp->CPAR, 0U); + + /* Reset DMAx_Channely memory address register */ + WRITE_REG(tmp->CMAR, 0U); + + /* Reset Request register field for DMAx Channel */ + LL_DMA_SetPeriphRequest(DMAx, Channel, LL_DMAMUX_REQ_MEM2MEM); + + if (Channel == LL_DMA_CHANNEL_1) + { + /* Reset interrupt pending bits for DMAx Channel1 */ + LL_DMA_ClearFlag_GI1(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_2) + { + /* Reset interrupt pending bits for DMAx Channel2 */ + LL_DMA_ClearFlag_GI2(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_3) + { + /* Reset interrupt pending bits for DMAx Channel3 */ + LL_DMA_ClearFlag_GI3(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_4) + { + /* Reset interrupt pending bits for DMAx Channel4 */ + LL_DMA_ClearFlag_GI4(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_5) + { + /* Reset interrupt pending bits for DMAx Channel5 */ + LL_DMA_ClearFlag_GI5(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_6) + { + /* Reset interrupt pending bits for DMAx Channel6 */ + LL_DMA_ClearFlag_GI6(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_7) + { + /* Reset interrupt pending bits for DMAx Channel7 */ + LL_DMA_ClearFlag_GI7(DMAx); + } + else if (Channel == LL_DMA_CHANNEL_8) + { + /* Reset interrupt pending bits for DMAx Channel8 */ + LL_DMA_ClearFlag_GI8(DMAx); + } + else + { + status = ERROR; + } + } + + return status; +} + +/** + * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct. + * @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros : + * @arg @ref __LL_DMA_GET_INSTANCE + * @arg @ref __LL_DMA_GET_CHANNEL + * @param DMAx DMAx Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_DMA_CHANNEL_1 + * @arg @ref LL_DMA_CHANNEL_2 + * @arg @ref LL_DMA_CHANNEL_3 + * @arg @ref LL_DMA_CHANNEL_4 + * @arg @ref LL_DMA_CHANNEL_5 + * @arg @ref LL_DMA_CHANNEL_6 + * @arg @ref LL_DMA_CHANNEL_7 + * @arg @ref LL_DMA_CHANNEL_8 + * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval ErrorStatus + * - SUCCESS: DMA registers are initialized + * - ERROR: Not applicable + */ +ErrorStatus LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Check the DMA Instance DMAx and Channel parameters*/ + assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel)); + + /* Check the DMA parameters from DMA_InitStruct */ + assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); + assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); + assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode)); + assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode)); + assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize)); + assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize)); + assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData)); + assert_param(IS_LL_DMA_PERIPHREQUEST(DMA_InitStruct->PeriphRequest)); + assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); + + /*---------------------------- DMAx CCR Configuration ------------------------ + * Configure DMAx_Channely: data transfer direction, data transfer mode, + * peripheral and memory increment mode, + * data size alignment and priority level with parameters : + * - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits + * - Mode: DMA_CCR_CIRC bit + * - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit + * - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit + * - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits + * - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits + * - Priority: DMA_CCR_PL[1:0] bits + */ + LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \ + DMA_InitStruct->Mode | \ + DMA_InitStruct->PeriphOrM2MSrcIncMode | \ + DMA_InitStruct->MemoryOrM2MDstIncMode | \ + DMA_InitStruct->PeriphOrM2MSrcDataSize | \ + DMA_InitStruct->MemoryOrM2MDstDataSize | \ + DMA_InitStruct->Priority); + + /*-------------------------- DMAx CMAR Configuration ------------------------- + * Configure the memory or destination base address with parameter : + * - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits + */ + LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress); + + /*-------------------------- DMAx CPAR Configuration ------------------------- + * Configure the peripheral or source base address with parameter : + * - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits + */ + LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress); + + /*--------------------------- DMAx CNDTR Configuration ----------------------- + * Configure the peripheral base address with parameter : + * - NbData: DMA_CNDTR_NDT[15:0] bits + */ + LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData); + + /*--------------------------- DMAMUXx CCR Configuration ---------------------- + * Configure the DMA request for DMA Channels on DMAMUX Channel x with parameter : + * - PeriphRequest: DMA_CxCR[7:0] bits + */ + LL_DMA_SetPeriphRequest(DMAx, Channel, DMA_InitStruct->PeriphRequest); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_DMA_InitTypeDef field to default value. + * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. + * @retval None + */ +void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) +{ + /* Set DMA_InitStruct fields to default values */ + DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U; + DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U; + DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; + DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL; + DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; + DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT; + DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; + DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; + DMA_InitStruct->NbData = 0x00000000U; + DMA_InitStruct->PeriphRequest = LL_DMAMUX_REQ_MEM2MEM; + DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* DMA1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_gpio.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_gpio.c new file mode 100644 index 0000000000..2ab0d9b026 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_gpio.c @@ -0,0 +1,242 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_gpio.c + * @author MCD Application Team + * @brief GPIO LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_gpio.h" +#include "stm32wl3x_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (GPIOA) || defined (GPIOB) + +/** @addtogroup GPIO_LL + * @{ + */ +/** MISRA C:2012 deviation rule has been granted for following rules: + * Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of + * range of the shift operator in following API : + * LL_GPIO_Init + */ + +/* Private types -------------------------------------------------------------*/ + +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ + +/* Private macros ------------------------------------------------------------*/ + +/** @addtogroup GPIO_LL_Private_Macros + * @{ + */ +#define IS_LL_GPIO_PIN(__VALUE__) (((0x00u) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL))) + +#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\ + ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\ + ((__VALUE__) == LL_GPIO_MODE_ANALOG)) + +#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\ + ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN)) + +#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH) ||\ + ((__VALUE__) == LL_GPIO_SPEED_FREQ_VERY_HIGH)) + +#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\ + ((__VALUE__) == LL_GPIO_PULL_UP) ||\ + ((__VALUE__) == LL_GPIO_PULL_DOWN)) + +#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\ + ((__VALUE__) == LL_GPIO_AF_1 ) ||\ + ((__VALUE__) == LL_GPIO_AF_2 ) ||\ + ((__VALUE__) == LL_GPIO_AF_3 ) ||\ + ((__VALUE__) == LL_GPIO_AF_4 ) ||\ + ((__VALUE__) == LL_GPIO_AF_5 ) ||\ + ((__VALUE__) == LL_GPIO_AF_6 ) ||\ + ((__VALUE__) == LL_GPIO_AF_7 )) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup GPIO_LL_Exported_Functions + * @{ + */ + +/** @addtogroup GPIO_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize GPIO registers (Registers restored to their default values). + * @param GPIOx GPIO Port + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are de-initialized + * - ERROR: Wrong GPIO Port + */ +ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + + /* Force and Release reset on clock of GPIOx Port */ + if (GPIOx == GPIOA) + { + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA); + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA); + } + else if (GPIOx == GPIOB) + { + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB); + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct. + * @note The application must ensure that the PWRC_CR1_APC bit is reset via LL PWRC services. + * @param GPIOx GPIO Port + * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure + * that contains the configuration information for the specified GPIO peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content + * - ERROR: Not applicable + */ +ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + uint32_t pinpos; + uint32_t currentpin; + + /* Check the parameters */ + assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); + assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin)); + assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode)); + assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull)); + + /* ------------------------- Configure the port pins ---------------- */ + /* Initialize pinpos on first pin set */ + pinpos = 0; + + /* Configure the port pins */ + while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00u) + { + /* Get current io position */ + currentpin = (GPIO_InitStruct->Pin) & (0x00000001uL << pinpos); + + if (currentpin != 0x00u) + { + if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)) + { + /* Check Speed mode parameters */ + assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed)); + + /* Speed mode configuration */ + LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed); + + /* Check Output mode parameters */ + assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType)); + + /* Output mode configuration*/ + LL_GPIO_SetPinOutputType(GPIOx, currentpin, GPIO_InitStruct->OutputType); + } + + /* Pull-up Pull down resistor configuration*/ + LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull); + + if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE) + { + /* Check Alternate parameter */ + assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate)); + + /* Speed mode configuration */ + if (currentpin < LL_GPIO_PIN_8) + { + LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate); + } + else + { + LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate); + } + } + + /* Pin Mode configuration */ + LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode); + } + pinpos++; + } + + return (SUCCESS); +} + +/** + * @brief Set each @ref LL_GPIO_InitTypeDef field to default value. + * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct) +{ + /* Reset GPIO init structure parameters values */ + GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL; + GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG; + GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL; + GPIO_InitStruct->Pull = LL_GPIO_PULL_NO; + GPIO_InitStruct->Alternate = LL_GPIO_AF_0; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (GPIOA) || defined (GPIOB) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_i2c.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_i2c.c new file mode 100644 index 0000000000..d3a0ffd236 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_i2c.c @@ -0,0 +1,224 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_i2c.c + * @author MCD Application Team + * @brief I2C LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_i2c.h" +#include "stm32wl3x_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (I2C1) || defined (I2C2) + +/** @defgroup I2C_LL I2C + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup I2C_LL_Private_Macros + * @{ + */ + +#define IS_LL_I2C_PERIPHERAL_MODE(__VALUE__) (((__VALUE__) == LL_I2C_MODE_I2C) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_HOST) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE) || \ + ((__VALUE__) == LL_I2C_MODE_SMBUS_DEVICE_ARP)) + +#define IS_LL_I2C_ANALOG_FILTER(__VALUE__) (((__VALUE__) == LL_I2C_ANALOGFILTER_ENABLE) || \ + ((__VALUE__) == LL_I2C_ANALOGFILTER_DISABLE)) + +#define IS_LL_I2C_DIGITAL_FILTER(__VALUE__) ((__VALUE__) <= 0x0000000FU) + +#define IS_LL_I2C_OWN_ADDRESS1(__VALUE__) ((__VALUE__) <= 0x000003FFU) + +#define IS_LL_I2C_TYPE_ACKNOWLEDGE(__VALUE__) (((__VALUE__) == LL_I2C_ACK) || \ + ((__VALUE__) == LL_I2C_NACK)) + +#define IS_LL_I2C_OWN_ADDRSIZE(__VALUE__) (((__VALUE__) == LL_I2C_OWNADDRESS1_7BIT) || \ + ((__VALUE__) == LL_I2C_OWNADDRESS1_10BIT)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2C_LL_Exported_Functions + * @{ + */ + +/** @addtogroup I2C_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the I2C registers to their default reset values. + * @param I2Cx I2C Instance. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: I2C registers are de-initialized + * - ERROR: I2C registers are not de-initialized + */ +ErrorStatus LL_I2C_DeInit(const I2C_TypeDef *I2Cx) +{ + ErrorStatus status = SUCCESS; + + /* Check the I2C Instance I2Cx */ + assert_param(IS_I2C_ALL_INSTANCE(I2Cx)); + + if (I2Cx == I2C1) + { + /* Force reset of I2C clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C1); + + /* Release reset of I2C clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C1); + } + else if (I2Cx == I2C2) + { + /* Force reset of I2C clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_I2C2); + + /* Release reset of I2C clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C2); + + } + else + { + status = ERROR; + } + + return status; +} + +/** + * @brief Initialize the I2C registers according to the specified parameters in I2C_InitStruct. + * @param I2Cx I2C Instance. + * @param I2C_InitStruct pointer to a @ref LL_I2C_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: I2C registers are initialized + * - ERROR: Not applicable + */ +ErrorStatus LL_I2C_Init(I2C_TypeDef *I2Cx, const LL_I2C_InitTypeDef *I2C_InitStruct) +{ + /* Check the I2C Instance I2Cx */ + assert_param(IS_I2C_ALL_INSTANCE(I2Cx)); + + /* Check the I2C parameters from I2C_InitStruct */ + assert_param(IS_LL_I2C_PERIPHERAL_MODE(I2C_InitStruct->PeripheralMode)); + assert_param(IS_LL_I2C_ANALOG_FILTER(I2C_InitStruct->AnalogFilter)); + assert_param(IS_LL_I2C_DIGITAL_FILTER(I2C_InitStruct->DigitalFilter)); + assert_param(IS_LL_I2C_OWN_ADDRESS1(I2C_InitStruct->OwnAddress1)); + assert_param(IS_LL_I2C_TYPE_ACKNOWLEDGE(I2C_InitStruct->TypeAcknowledge)); + assert_param(IS_LL_I2C_OWN_ADDRSIZE(I2C_InitStruct->OwnAddrSize)); + + /* Disable the selected I2Cx Peripheral */ + LL_I2C_Disable(I2Cx); + + /*---------------------------- I2Cx CR1 Configuration ------------------------ + * Configure the analog and digital noise filters with parameters : + * - AnalogFilter: I2C_CR1_ANFOFF bit + * - DigitalFilter: I2C_CR1_DNF[3:0] bits + */ + LL_I2C_ConfigFilters(I2Cx, I2C_InitStruct->AnalogFilter, I2C_InitStruct->DigitalFilter); + + /*---------------------------- I2Cx TIMINGR Configuration -------------------- + * Configure the SDA setup, hold time and the SCL high, low period with parameter : + * - Timing: I2C_TIMINGR_PRESC[3:0], I2C_TIMINGR_SCLDEL[3:0], I2C_TIMINGR_SDADEL[3:0], + * I2C_TIMINGR_SCLH[7:0] and I2C_TIMINGR_SCLL[7:0] bits + */ + LL_I2C_SetTiming(I2Cx, I2C_InitStruct->Timing); + + /* Enable the selected I2Cx Peripheral */ + LL_I2C_Enable(I2Cx); + + /*---------------------------- I2Cx OAR1 Configuration ----------------------- + * Disable, Configure and Enable I2Cx device own address 1 with parameters : + * - OwnAddress1: I2C_OAR1_OA1[9:0] bits + * - OwnAddrSize: I2C_OAR1_OA1MODE bit + */ + LL_I2C_DisableOwnAddress1(I2Cx); + LL_I2C_SetOwnAddress1(I2Cx, I2C_InitStruct->OwnAddress1, I2C_InitStruct->OwnAddrSize); + + /* OwnAdress1 == 0 is reserved for General Call address */ + if (I2C_InitStruct->OwnAddress1 != 0U) + { + LL_I2C_EnableOwnAddress1(I2Cx); + } + + /*---------------------------- I2Cx MODE Configuration ----------------------- + * Configure I2Cx peripheral mode with parameter : + * - PeripheralMode: I2C_CR1_SMBDEN and I2C_CR1_SMBHEN bits + */ + LL_I2C_SetMode(I2Cx, I2C_InitStruct->PeripheralMode); + + /*---------------------------- I2Cx CR2 Configuration ------------------------ + * Configure the ACKnowledge or Non ACKnowledge condition + * after the address receive match code or next received byte with parameter : + * - TypeAcknowledge: I2C_CR2_NACK bit + */ + LL_I2C_AcknowledgeNextData(I2Cx, I2C_InitStruct->TypeAcknowledge); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_I2C_InitTypeDef field to default value. + * @param I2C_InitStruct Pointer to a @ref LL_I2C_InitTypeDef structure. + * @retval None + */ +void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct) +{ + /* Set I2C_InitStruct fields to default values */ + I2C_InitStruct->PeripheralMode = LL_I2C_MODE_I2C; + I2C_InitStruct->Timing = 0U; + I2C_InitStruct->AnalogFilter = LL_I2C_ANALOGFILTER_ENABLE; + I2C_InitStruct->DigitalFilter = 0U; + I2C_InitStruct->OwnAddress1 = 0U; + I2C_InitStruct->TypeAcknowledge = LL_I2C_NACK; + I2C_InitStruct->OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* I2C1 || I2C2 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_lcsc.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_lcsc.c new file mode 100644 index 0000000000..16df3fe471 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_lcsc.c @@ -0,0 +1,56 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_lcsc.c + * @author MCD Application Team + * @brief LCSC LL module driver + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_lcsc.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (LCSC) + +/** @addtogroup LCSC_LL LCSC + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/** + * @} + */ + + +#endif /* LCSC */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_lpuart.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_lpuart.c new file mode 100644 index 0000000000..e6aa488a6f --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_lpuart.c @@ -0,0 +1,285 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_lpuart.c + * @author MCD Application Team + * @brief LPUART LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_lpuart.h" +#include "stm32wl3x_ll_rcc.h" +#include "stm32wl3x_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (LPUART1) + +/** @addtogroup LPUART_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup LPUART_LL_Private_Constants + * @{ + */ + +/* Definition of default baudrate value used for LPUART initialisation */ +#define LPUART_DEFAULT_BAUDRATE (9600U) + +/** + * @} + */ + + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup LPUART_LL_Private_Macros + * @{ + */ + +/* Check of parameters for configuration of LPUART registers */ + +#define IS_LL_LPUART_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPUART_PRESCALER_DIV1) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV2) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV4) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV6) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV8) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV10) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV12) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV16) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV32) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV64) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV128) \ + || ((__VALUE__) == LL_LPUART_PRESCALER_DIV256)) + +/* __BAUDRATE__ Depending on constraints applicable for LPUART BRR register */ +/* value : */ +/* - fck must be in the range [3 x baudrate, 4096 x baudrate] */ +/* - LPUART_BRR register value should be >= 0x300 */ +/* - LPUART_BRR register value should be <= 0xFFFFF (20 bits) */ +/* Baudrate specified by the user should belong to [8, 16000000].*/ +#define IS_LL_LPUART_BAUDRATE(__BAUDRATE__) (((__BAUDRATE__) <= 16000000U) && ((__BAUDRATE__) >= 8U)) + +/* __VALUE__ BRR content must be greater than or equal to 0x300. */ +#define IS_LL_LPUART_BRR_MIN(__VALUE__) ((__VALUE__) >= 0x300U) + +/* __VALUE__ BRR content must be lower than or equal to 0xFFFFF. */ +#define IS_LL_LPUART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x000FFFFFU) + +#define IS_LL_LPUART_DIRECTION(__VALUE__) (((__VALUE__) == LL_LPUART_DIRECTION_NONE) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_RX) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_TX) \ + || ((__VALUE__) == LL_LPUART_DIRECTION_TX_RX)) + +#define IS_LL_LPUART_PARITY(__VALUE__) (((__VALUE__) == LL_LPUART_PARITY_NONE) \ + || ((__VALUE__) == LL_LPUART_PARITY_EVEN) \ + || ((__VALUE__) == LL_LPUART_PARITY_ODD)) + +#define IS_LL_LPUART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_LPUART_DATAWIDTH_7B) \ + || ((__VALUE__) == LL_LPUART_DATAWIDTH_8B) \ + || ((__VALUE__) == LL_LPUART_DATAWIDTH_9B)) + +#define IS_LL_LPUART_STOPBITS(__VALUE__) (((__VALUE__) == LL_LPUART_STOPBITS_1) \ + || ((__VALUE__) == LL_LPUART_STOPBITS_2)) + +#define IS_LL_LPUART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_LPUART_HWCONTROL_NONE) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_LPUART_HWCONTROL_RTS_CTS)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup LPUART_LL_Exported_Functions + * @{ + */ + +/** @addtogroup LPUART_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize LPUART registers (Registers restored to their default values). + * @param LPUARTx LPUART Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: LPUART registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_LPUART_DeInit(const USART_TypeDef *LPUARTx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_LPUART_INSTANCE(LPUARTx)); + + if (LPUARTx == LPUART1) + { + /* Force reset of LPUART peripheral */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_LPUART1); + + /* Release reset of LPUART peripheral */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPUART1); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize LPUART registers according to the specified + * parameters in LPUART_InitStruct. + * @note As some bits in LPUART configuration registers can only be written when + * the LPUART is disabled (USART_CR1_UE bit =0), + * LPUART Peripheral should be in disabled state prior calling this function. + * Otherwise, ERROR result will be returned. + * @note Baud rate value stored in LPUART_InitStruct BaudRate field, should be valid (different from 0). + * @param LPUARTx LPUART Instance + * @param LPUART_InitStruct pointer to a @ref LL_LPUART_InitTypeDef structure + * that contains the configuration information for the specified LPUART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: LPUART registers are initialized according to LPUART_InitStruct content + * - ERROR: Problem occurred during LPUART Registers initialization + */ +ErrorStatus LL_LPUART_Init(USART_TypeDef *LPUARTx, const LL_LPUART_InitTypeDef *LPUART_InitStruct) +{ + ErrorStatus status = ERROR; + uint32_t periphclk; + + /* Check the parameters */ + assert_param(IS_LPUART_INSTANCE(LPUARTx)); + assert_param(IS_LL_LPUART_PRESCALER(LPUART_InitStruct->PrescalerValue)); + assert_param(IS_LL_LPUART_BAUDRATE(LPUART_InitStruct->BaudRate)); + assert_param(IS_LL_LPUART_DATAWIDTH(LPUART_InitStruct->DataWidth)); + assert_param(IS_LL_LPUART_STOPBITS(LPUART_InitStruct->StopBits)); + assert_param(IS_LL_LPUART_PARITY(LPUART_InitStruct->Parity)); + assert_param(IS_LL_LPUART_DIRECTION(LPUART_InitStruct->TransferDirection)); + assert_param(IS_LL_LPUART_HWCONTROL(LPUART_InitStruct->HardwareFlowControl)); + + /* LPUART needs to be in disabled state, in order to be able to configure some bits in + CRx registers. Otherwise (LPUART not in Disabled state) => return ERROR */ + if (LL_LPUART_IsEnabled(LPUARTx) == 0U) + { + /*---------------------------- LPUART CR1 Configuration ----------------------- + * Configure LPUARTx CR1 (LPUART Word Length, Parity and Transfer Direction bits) with parameters: + * - DataWidth: USART_CR1_M bits according to LPUART_InitStruct->DataWidth value + * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to LPUART_InitStruct->Parity value + * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to LPUART_InitStruct->TransferDirection value + */ + MODIFY_REG(LPUARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE), + (LPUART_InitStruct->DataWidth | LPUART_InitStruct->Parity | LPUART_InitStruct->TransferDirection)); + + /*---------------------------- LPUART CR2 Configuration ----------------------- + * Configure LPUARTx CR2 (Stop bits) with parameters: + * - Stop Bits: USART_CR2_STOP bits according to LPUART_InitStruct->StopBits value. + */ + LL_LPUART_SetStopBitsLength(LPUARTx, LPUART_InitStruct->StopBits); + + /*---------------------------- LPUART CR3 Configuration ----------------------- + * Configure LPUARTx CR3 (Hardware Flow Control) with parameters: + * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according + * to LPUART_InitStruct->HardwareFlowControl value. + */ + LL_LPUART_SetHWFlowCtrl(LPUARTx, LPUART_InitStruct->HardwareFlowControl); + + /*---------------------------- LPUART BRR Configuration ----------------------- + * Retrieve Clock frequency used for LPUART Peripheral + */ + periphclk = LL_RCC_GetLPUARTClockFreq(LL_RCC_LPUART1_CLKSOURCE); + + /* Configure the LPUART Baud Rate : + - prescaler value is required + - valid baud rate value (different from 0) is required + - Peripheral clock as returned by RCC service, should be valid (different from 0). + */ + if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) + && (LPUART_InitStruct->BaudRate != 0U)) + { + status = SUCCESS; + LL_LPUART_SetBaudRate(LPUARTx, + periphclk, + LPUART_InitStruct->PrescalerValue, + LPUART_InitStruct->BaudRate); + + /* Check BRR is greater than or equal to 0x300 */ + assert_param(IS_LL_LPUART_BRR_MIN(LPUARTx->BRR)); + + /* Check BRR is lower than or equal to 0xFFFFF */ + assert_param(IS_LL_LPUART_BRR_MAX(LPUARTx->BRR)); + } + + /*---------------------------- LPUART PRESC Configuration ----------------------- + * Configure LPUARTx PRESC (Prescaler) with parameters: + * - PrescalerValue: LPUART_PRESC_PRESCALER bits according to LPUART_InitStruct->PrescalerValue value. + */ + LL_LPUART_SetPrescaler(LPUARTx, LPUART_InitStruct->PrescalerValue); + } + + return (status); +} + +/** + * @brief Set each @ref LL_LPUART_InitTypeDef field to default value. + * @param LPUART_InitStruct pointer to a @ref LL_LPUART_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct) +{ + /* Set LPUART_InitStruct fields to default values */ + LPUART_InitStruct->PrescalerValue = LL_LPUART_PRESCALER_DIV1; + LPUART_InitStruct->BaudRate = LPUART_DEFAULT_BAUDRATE; + LPUART_InitStruct->DataWidth = LL_LPUART_DATAWIDTH_8B; + LPUART_InitStruct->StopBits = LL_LPUART_STOPBITS_1; + LPUART_InitStruct->Parity = LL_LPUART_PARITY_NONE ; + LPUART_InitStruct->TransferDirection = LL_LPUART_DIRECTION_TX_RX; + LPUART_InitStruct->HardwareFlowControl = LL_LPUART_HWCONTROL_NONE; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* LPUART1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_pwr.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_pwr.c new file mode 100644 index 0000000000..f0afd1ab6e --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_pwr.c @@ -0,0 +1,116 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_pwr.c + * @author MCD Application Team + * @brief PWR LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_pwr.h" + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(PWR) + +/** @defgroup PWR_LL PWR + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ + +/** @defgroup PWR_LL_Private_Constants PWR Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PWR_LL_Exported_Functions + * @{ + */ + +/** @addtogroup PWR_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the PWR registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: PWR registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_PWR_DeInit(void) +{ + /* Disable PWR Wakeup Source */ + + LL_PWR_WriteReg(EWUA, 0); + LL_PWR_WriteReg(WUPA, 0); + LL_PWR_WriteReg(EWUB, 0); + LL_PWR_WriteReg(WUPB, 0); + LL_PWR_WriteReg(IEWU, 0); + LL_PWR_WriteReg(IWUP, 0); + +#if defined(PWR_SDWN_WUEN_WUEN) + LL_PWR_WriteReg(SDWN_WUEN, 0); + LL_PWR_WriteReg(SDWN_WUPOL, 0); +#endif /* PWR_SDWN_WUEN_WUEN */ + + LL_PWR_WriteReg(IWUF, + LL_PWR_WAKEUP_LPAWUR + | LL_PWR_WAKEUP_SUBG + | LL_PWR_WAKEUP_SUBGHOST + | LL_PWR_WAKEUP_LCSC + | LL_PWR_WAKEUP_COMP + | LL_PWR_WAKEUP_LCD + | LL_PWR_WAKEUP_RTC + | LL_PWR_WAKEUP_LPUART + ); + + LL_PWR_WriteReg(WUFA, LL_PWR_WAKEUP_ALL); + LL_PWR_WriteReg(WUFB, LL_PWR_WAKEUP_ALL); + +#if defined(PWR_SDWN_WUEN_WUEN) + LL_PWR_WriteReg(SDWN_WUF, 0); +#endif /* PWR_SDWN_WUEN_WUEN */ + + return SUCCESS; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +#endif /* defined(PWR) */ +/** + * @} + */ + +#endif /* defined(USE_FULL_LL_DRIVER) */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_rcc.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_rcc.c new file mode 100644 index 0000000000..0ad73db7e6 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_rcc.c @@ -0,0 +1,365 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_rcc.c + * @author MCD Application Team + * @brief RCC LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_rcc.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(RCC) + +/** @addtogroup RCC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RCC_LL_Private_Macros + * @{ + */ +#define IS_LL_RCC_SPI_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_SPI3_CLKSOURCE) + +#if defined(RCC_CFGR_LPUCLKSEL) +#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE) +#endif /* RCC_CFGR_LPUCLKSEL */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup RCC_LL_Private_Functions RCC Private functions + * @{ + */ +uint32_t RCC_GetSystemClockFreq(void); + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RCC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RCC_LL_EF_Init + * @{ + */ + +/** + * @brief Reset the RCC clock to the default reset state. + * @note The default reset state of the clock configuration is given below: + * - HSI ON and used as system clock source + * - HSE and PLL Source OFF + * - All interrupts disabled + * @note This function doesn't modify the configuration of the + * - Peripheral clocks + * - LSI, LSE + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RCC registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_RCC_DeInit(void) +{ + uint32_t vl_mask; + + /* Disable all the HS clock source */ + LL_RCC_HSE_Disable(); + LL_RCC_RC64MPLL_Disable(); + + /* Set the System Clock prescaler to reset state */ + LL_RCC_SetRC64MPLLPrescaler(LL_RCC_RC64MPLL_DIV_4); + + /* Wait for PLL READY bit to be reset */ + while (LL_RCC_RC64MPLL_IsReady() != 0U) + {} + + /* Insure HSIRDY bit is set */ + while (LL_RCC_HSI_IsReady() == 0U) + {} + + /* Disable all interrupts */ + LL_RCC_WriteReg(CIER, 0x00000000U); + + /* Clear all interrupt flags */ + vl_mask = RCC_CIFR_LSIRDYF | RCC_CIFR_LSERDYF | RCC_CIFR_HSIRDYF | RCC_CIFR_HSERDYF | RCC_CIFR_HSIPLLRDYF; + LL_RCC_WriteReg(CIFR, vl_mask); + + /* Clear reset flags */ + LL_RCC_ClearResetFlags(); + + return SUCCESS; +} + +/** + * @} + */ + +/** @addtogroup RCC_LL_EF_Get_Freq + * @brief Return the frequency of the system clock device. + * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**) + * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***) + * @note (**) HSI_VALUE is a constant defined in this file (default value + * 64 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * @note (***) HSE_VALUE is a constant defined in this file (default value + * 32 MHz). The HSE_VALUE value is divided from a 64 MHz PLL to return + * frequency of the crystal used. + * @{ + */ + +/** + * @brief Return the frequency of the system clock. + * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies + * @retval None + */ +void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks) +{ + /* Get SYSCLK frequency */ + RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq(); +} + +/** + * @brief Return SMPS clock frequency + * @note This function is only applicable when CPU runs. + * @retval SMPS clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that the peripheral has a wrong ANADIV prescaler setup + */ +uint32_t LL_RCC_GetSMPSClockFreq(void) +{ + uint32_t smps_frequency; + uint32_t smps_prescaler; + uint32_t smps_krm; + + + smps_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + if (LL_RCC_KRM_IsEnabled()) + { + smps_frequency = (LL_RCC_DIRECT_HSE_IsEnabled()) ? HSE_VALUE : RC64MPLL_VALUE; + smps_krm = LL_RCC_KRM_GetRateMultiplier(); + if (smps_krm < 8) + { + smps_krm = 8; + } + smps_frequency = smps_frequency / smps_krm; + } + else + { + smps_prescaler = LL_RCC_GetSMPSPrescaler(); + if (smps_prescaler == LL_RCC_SMPS_DIV_2) + { + smps_frequency = RC64MPLL_VALUE / 8; + } + else + { + smps_frequency = RC64MPLL_VALUE / 16; + } + } + return smps_frequency; +} + +#if defined(RCC_CFGR_LPUCLKSEL) +/** + * @brief Return LPUARTx clock frequency + * @param LPUARTxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_LPUART1_CLKSOURCE + * @retval LPUART clock frequency (in Hz) + * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (CLK_16M or LSE) is not ready + */ +uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource) +{ + uint32_t lpuart_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_LPUART_CLKSOURCE(LPUARTxSource)); + + /* LPUART1CLK clock frequency */ + if (LPUARTxSource == LL_RCC_LPUART1_CLKSOURCE) + { + switch (LL_RCC_GetLPUARTClockSource()) + { + case LL_RCC_LPUCLKSEL_CLKLSE: /* LPUART1 Clock is LSE Osc. */ + if (LL_RCC_LSE_IsReady() == 1U) + { + lpuart_frequency = LSE_VALUE; + } + break; + + case LL_RCC_LPUCLKSEL_CLK16M: /* LPUART1 Clock is CLK_16M */ + lpuart_frequency = RC64MPLL_VALUE / 4; + break; + + default: + break; + } + } + + return lpuart_frequency; +} +#endif /* RCC_CFGR_LPUCLKSEL */ +/** + * @brief Return SPIx clock frequency + * @param SPIxSource This parameter can be one of the following values: + * @arg @ref LL_RCC_SPI3_CLKSOURCE + * @retval SPI clock frequency (in Hz) + */ +uint32_t LL_RCC_GetSPIClockFreq(uint32_t SPIxSource) +{ + uint32_t spi_frequency = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check parameter */ + assert_param(IS_LL_RCC_SPI_CLKSOURCE(SPIxSource)); + + /* SPI3CLK clock frequency */ + if (SPIxSource == LL_RCC_SPI3_CLKSOURCE) + { + switch (LL_RCC_GetSPI3I2SClockSource()) + { + case LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT_DIV: /* SPI3 Clock is 16M. */ + spi_frequency = RC64MPLL_VALUE / 4; + break; + case LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT: + if (LL_RCC_DIRECT_HSE_IsEnabled()) + { + spi_frequency = HSE_VALUE / 2; /* SPI3 Clock is 24M. */ + } + else + { + spi_frequency = RC64MPLL_VALUE / 2; /* SPI3 Clock is 32M. */ + } + break; + + case LL_RCC_SPI3_I2S_CLKSOURCE_CLK_RC64MPLL: /* SPI3 Clock is 64M. */ + spi_frequency = RCC_GetSystemClockFreq(); + break; + + default: + break; + } + } + + return spi_frequency; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup RCC_LL_Private_Functions + * @{ + */ + +/** + * @brief Return SYSTEM clock (SYSCLK) frequency + * @retval SYSTEM clock frequency (in Hz) + */ +uint32_t RCC_GetSystemClockFreq(void) +{ + uint32_t frequency; + uint32_t sysclk_prescaler=0; + + frequency = RC64MPLL_VALUE; + + if (LL_RCC_DIRECT_HSE_IsEnabled()) + { + frequency = HSE_VALUE; + switch (LL_RCC_GetCLKSYSPrescalerStatus()) + { + case LL_RCC_DIRECT_HSE_DIV_1: + sysclk_prescaler = 1; + break; + case LL_RCC_DIRECT_HSE_DIV_2: + sysclk_prescaler = 2; + break; + case LL_RCC_DIRECT_HSE_DIV_3: + sysclk_prescaler = 3; + break; + case LL_RCC_DIRECT_HSE_DIV_6: + sysclk_prescaler = 6; + break; + case LL_RCC_DIRECT_HSE_DIV_12: + sysclk_prescaler = 12; + break; + case LL_RCC_DIRECT_HSE_DIV_24: + sysclk_prescaler = 24; + break; + case LL_RCC_DIRECT_HSE_DIV_48: + sysclk_prescaler = 48; + break; + } + } + else + { + frequency = RC64MPLL_VALUE; + switch (LL_RCC_GetCLKSYSPrescalerStatus()) + { + case LL_RCC_RC64MPLL_DIV_1: + sysclk_prescaler = 1; + break; + case LL_RCC_RC64MPLL_DIV_2: + sysclk_prescaler = 2; + break; + case LL_RCC_RC64MPLL_DIV_4: + sysclk_prescaler = 4; + break; + case LL_RCC_RC64MPLL_DIV_8: + sysclk_prescaler = 8; + break; + case LL_RCC_RC64MPLL_DIV_16: + sysclk_prescaler = 16; + break; + case LL_RCC_RC64MPLL_DIV_32: + sysclk_prescaler = 32; + break; + case LL_RCC_RC64MPLL_DIV_64: + sysclk_prescaler = 64; + break; + } + } + + return (uint32_t)(frequency / sysclk_prescaler); +} +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RCC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_rng.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_rng.c new file mode 100644 index 0000000000..38fc617a90 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_rng.c @@ -0,0 +1,139 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_rng.c + * @author MCD Application Team + * @brief RNG LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_rng.h" +#include "stm32wl3x_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (RNG) + +/** @addtogroup RNG_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ + +/** @addtogroup RNG_LL_Private_Macros + * @{ + */ +#define IS_LL_RNG_CLK_DET(__MODE__) (((__MODE__) == LL_RNG_CLK_DET_ENABLE) || \ + ((__MODE__) == LL_RNG_CLK_DET_DISABLE)) + +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RNG_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RNG_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize RNG registers (Registers restored to their default values). + * @param RNGx RNG Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RNG registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx) +{ + /* Check the parameters */ + assert_param(IS_RNG_ALL_INSTANCE(RNGx)); + /* Enable RNG reset state */ + LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_RNG); + + /* Release RNG from reset state */ + LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_RNG); + return (SUCCESS); +} + +/** + * @brief Initialize RNG registers according to the specified parameters in RNG_InitStruct. + * @param RNGx RNG Instance + * @param RNG_InitStruct pointer to a LL_RNG_InitTypeDef structure + * that contains the configuration information for the specified RNG peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RNG registers are initialized according to RNG_InitStruct content + * - ERROR: not applicable + */ +ErrorStatus LL_RNG_Init(RNG_TypeDef *RNGx, LL_RNG_InitTypeDef *RNG_InitStruct) +{ + /* Check the parameters */ + assert_param(IS_RNG_ALL_INSTANCE(RNGx)); + assert_param(IS_LL_RNG_CLK_DET(RNG_InitStruct->ClockDetection)); + + /* Clock Detection configuration */ + MODIFY_REG(RNGx->CR, RNG_CR_TST_CLK, RNG_InitStruct->ClockDetection); + + return (SUCCESS); +} + +/** + * @brief Set each @ref LL_RNG_InitTypeDef field to default value. + * @param RNG_InitStruct pointer to a @ref LL_RNG_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_RNG_StructInit(LL_RNG_InitTypeDef *RNG_InitStruct) +{ + /* Set RNG_InitStruct fields to default values */ + RNG_InitStruct->ClockDetection = LL_RNG_CLK_DET_DISABLE; + +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* RNG */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_rtc.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_rtc.c new file mode 100644 index 0000000000..bee9cd7ab2 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_rtc.c @@ -0,0 +1,689 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_rtc.c + * @author MCD Application Team + * @brief RTC LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_rtc.h" +#include "stm32wl3x_ll_cortex.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(RTC) + +/** @addtogroup RTC_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup RTC_LL_Private_Constants + * @{ + */ +/* Default values used for prescaler */ +#define RTC_ASYNCH_PRESC_DEFAULT 0x0000007FU +#define RTC_SYNCH_PRESC_DEFAULT 0x000000FFU + +/* Values used for timeout */ +#define RTC_INITMODE_TIMEOUT 1000U /* 1s when tick set to 1ms */ +#define RTC_SYNCHRO_TIMEOUT 1000U /* 1s when tick set to 1ms */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup RTC_LL_Private_Macros + * @{ + */ + +#define IS_LL_RTC_HOURFORMAT(__VALUE__) (((__VALUE__) == LL_RTC_HOURFORMAT_24HOUR) \ + || ((__VALUE__) == LL_RTC_HOURFORMAT_AMPM)) + +#define IS_LL_RTC_ASYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0x7FU) + +#define IS_LL_RTC_SYNCH_PREDIV(__VALUE__) ((__VALUE__) <= 0x7FFFU) + +#define IS_LL_RTC_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_FORMAT_BIN) \ + || ((__VALUE__) == LL_RTC_FORMAT_BCD)) + +#define IS_LL_RTC_TIME_FORMAT(__VALUE__) (((__VALUE__) == LL_RTC_TIME_FORMAT_AM_OR_24) \ + || ((__VALUE__) == LL_RTC_TIME_FORMAT_PM)) + +#define IS_LL_RTC_HOUR12(__HOUR__) (((__HOUR__) > 0U) && ((__HOUR__) <= 12U)) +#define IS_LL_RTC_HOUR24(__HOUR__) ((__HOUR__) <= 23U) +#define IS_LL_RTC_MINUTES(__MINUTES__) ((__MINUTES__) <= 59U) +#define IS_LL_RTC_SECONDS(__SECONDS__) ((__SECONDS__) <= 59U) + +#define IS_LL_RTC_WEEKDAY(__VALUE__) (((__VALUE__) == LL_RTC_WEEKDAY_MONDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_TUESDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_WEDNESDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_THURSDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_FRIDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_SATURDAY) \ + || ((__VALUE__) == LL_RTC_WEEKDAY_SUNDAY)) + +#define IS_LL_RTC_DAY(__DAY__) (((__DAY__) >= 1U) && ((__DAY__) <= 31U)) + +#define IS_LL_RTC_MONTH(__MONTH__) (((__MONTH__) >= 1U) && ((__MONTH__) <= 12U)) + +#define IS_LL_RTC_YEAR(__YEAR__) ((__YEAR__) <= 99U) + +#define IS_LL_RTC_ALMA_MASK(__VALUE__) (((__VALUE__) == LL_RTC_ALMA_MASK_NONE) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_DATEWEEKDAY) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_HOURS) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_MINUTES) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_SECONDS) \ + || ((__VALUE__) == LL_RTC_ALMA_MASK_ALL)) + +#define IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(__SEL__) (((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) || \ + ((__SEL__) == LL_RTC_ALMA_DATEWEEKDAYSEL_WEEKDAY)) + +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup RTC_LL_Exported_Functions + * @{ + */ + +/** @addtogroup RTC_LL_EF_Init + * @{ + */ + +/** + * @brief De-Initializes the RTC registers to their default reset values. + * @note This function does not reset the RTC Clock source and RTC Backup Data + * registers. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are de-initialized + * - ERROR: RTC registers are not de-initialized + */ +ErrorStatus LL_RTC_DeInit(RTC_TypeDef *RTCx) +{ + ErrorStatus status = ERROR; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Reset TR, DR and CR registers */ + LL_RTC_WriteReg(RTCx, TR, 0x00000000U); + LL_RTC_WriteReg(RTCx, WUTR, RTC_WUTR_WUT); + LL_RTC_WriteReg(RTCx, DR, (RTC_DR_WDU_0 | RTC_DR_MU_0 | RTC_DR_DU_0)); + + /* Reset All CR bits except CR[2:0] */ + LL_RTC_WriteReg(RTCx, CR, (LL_RTC_ReadReg(RTCx, CR) & RTC_CR_WUCKSEL)); + + LL_RTC_WriteReg(RTCx, PRER, (RTC_PRER_PREDIV_A | RTC_SYNCH_PRESC_DEFAULT)); + LL_RTC_WriteReg(RTCx, ALRMAR, 0x00000000U); + LL_RTC_WriteReg(RTCx, CALR, 0x00000000U); + LL_RTC_WriteReg(RTCx, SHIFTR, 0x00000000U); + LL_RTC_WriteReg(RTCx, ALRMASSR, 0x00000000U); + + /* Reset ISR register and exit initialization mode */ + LL_RTC_WriteReg(RTCx, ISR, 0x00000000U); + + /* Reset Tamper and alternate functions configuration register */ + LL_RTC_WriteReg(RTCx, TAMPCR, 0x00000000U); + + /* Reset Option register */ + LL_RTC_WriteReg(RTCx, OR, 0x00000000U); + + /* Wait till the RTC RSF flag is set */ + status = LL_RTC_WaitForSynchro(RTCx); + } + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Initializes the RTC registers according to the specified parameters + * in RTC_InitStruct. + * @param RTCx RTC Instance + * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure that contains + * the configuration information for the RTC peripheral. + * @note The RTC Prescaler register is write protected and can be written in + * initialization mode only. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are initialized + * - ERROR: RTC registers are not initialized + */ +ErrorStatus LL_RTC_Init(RTC_TypeDef *RTCx, LL_RTC_InitTypeDef *RTC_InitStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_HOURFORMAT(RTC_InitStruct->HourFormat)); + assert_param(IS_LL_RTC_ASYNCH_PREDIV(RTC_InitStruct->AsynchPrescaler)); + assert_param(IS_LL_RTC_SYNCH_PREDIV(RTC_InitStruct->SynchPrescaler)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Set Hour Format */ + LL_RTC_SetHourFormat(RTCx, RTC_InitStruct->HourFormat); + + /* Configure Synchronous and Asynchronous prescaler factor */ + LL_RTC_SetSynchPrescaler(RTCx, RTC_InitStruct->SynchPrescaler); + LL_RTC_SetAsynchPrescaler(RTCx, RTC_InitStruct->AsynchPrescaler); + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + status = SUCCESS; + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_InitTypeDef field to default value. + * @param RTC_InitStruct pointer to a @ref LL_RTC_InitTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_StructInit(LL_RTC_InitTypeDef *RTC_InitStruct) +{ + /* Set RTC_InitStruct fields to default values */ + RTC_InitStruct->HourFormat = LL_RTC_HOURFORMAT_24HOUR; + RTC_InitStruct->AsynchPrescaler = RTC_ASYNCH_PRESC_DEFAULT; + RTC_InitStruct->SynchPrescaler = RTC_SYNCH_PRESC_DEFAULT; +} + +/** + * @brief Set the RTC current time. + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_TimeStruct pointer to a RTC_TimeTypeDef structure that contains + * the time configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Time register is configured + * - ERROR: RTC Time register is not configured + */ +ErrorStatus LL_RTC_TIME_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_TimeTypeDef *RTC_TimeStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(RTC_TimeStruct->Hours)); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat)); + } + else + { + RTC_TimeStruct->TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(RTC_TimeStruct->Hours)); + } + assert_param(IS_LL_RTC_MINUTES(RTC_TimeStruct->Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_TimeStruct->Seconds)); + } + else + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_TimeStruct->TimeFormat)); + } + else + { + RTC_TimeStruct->TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Hours))); + } + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_TimeStruct->Seconds))); + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Check the input parameters format */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, RTC_TimeStruct->Hours, + RTC_TimeStruct->Minutes, RTC_TimeStruct->Seconds); + } + else + { + LL_RTC_TIME_Config(RTCx, RTC_TimeStruct->TimeFormat, __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Hours), + __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Minutes), + __LL_RTC_CONVERT_BIN2BCD(RTC_TimeStruct->Seconds)); + } + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U) + { + status = LL_RTC_WaitForSynchro(RTCx); + } + else + { + status = SUCCESS; + } + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_TimeTypeDef field to default value (Time = 00h:00min:00sec). + * @param RTC_TimeStruct pointer to a @ref LL_RTC_TimeTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_TIME_StructInit(LL_RTC_TimeTypeDef *RTC_TimeStruct) +{ + /* Time = 00h:00min:00sec */ + RTC_TimeStruct->TimeFormat = LL_RTC_TIME_FORMAT_AM_OR_24; + RTC_TimeStruct->Hours = 0U; + RTC_TimeStruct->Minutes = 0U; + RTC_TimeStruct->Seconds = 0U; +} + +/** + * @brief Set the RTC current date. + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_DateStruct pointer to a RTC_DateTypeDef structure that contains + * the date configuration information for the RTC. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC Day register is configured + * - ERROR: RTC Day register is not configured + */ +ErrorStatus LL_RTC_DATE_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_DateTypeDef *RTC_DateStruct) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + + if ((RTC_Format == LL_RTC_FORMAT_BIN) && ((RTC_DateStruct->Month & 0x10U) == 0x10U)) + { + RTC_DateStruct->Month = (uint8_t)(RTC_DateStruct->Month & (uint8_t)~(0x10U)) + 0x0AU; + } + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + assert_param(IS_LL_RTC_YEAR(RTC_DateStruct->Year)); + assert_param(IS_LL_RTC_MONTH(RTC_DateStruct->Month)); + assert_param(IS_LL_RTC_DAY(RTC_DateStruct->Day)); + } + else + { + assert_param(IS_LL_RTC_YEAR(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Year))); + assert_param(IS_LL_RTC_MONTH(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Month))); + assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_DateStruct->Day))); + } + assert_param(IS_LL_RTC_WEEKDAY(RTC_DateStruct->WeekDay)); + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Set Initialization mode */ + if (LL_RTC_EnterInitMode(RTCx) != ERROR) + { + /* Check the input parameters format */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, RTC_DateStruct->Day, RTC_DateStruct->Month, RTC_DateStruct->Year); + } + else + { + LL_RTC_DATE_Config(RTCx, RTC_DateStruct->WeekDay, __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Day), + __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Month), __LL_RTC_CONVERT_BIN2BCD(RTC_DateStruct->Year)); + } + + /* Exit Initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ + if (LL_RTC_IsShadowRegBypassEnabled(RTCx) == 0U) + { + status = LL_RTC_WaitForSynchro(RTCx); + } + else + { + status = SUCCESS; + } + } + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return status; +} + +/** + * @brief Set each @ref LL_RTC_DateTypeDef field to default value (date = Monday, January 01 xx00) + * @param RTC_DateStruct pointer to a @ref LL_RTC_DateTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_DATE_StructInit(LL_RTC_DateTypeDef *RTC_DateStruct) +{ + /* Monday, January 01 xx00 */ + RTC_DateStruct->WeekDay = LL_RTC_WEEKDAY_MONDAY; + RTC_DateStruct->Day = 1U; + RTC_DateStruct->Month = LL_RTC_MONTH_JANUARY; + RTC_DateStruct->Year = 0U; +} + +/** + * @brief Set the RTC Alarm A. + * @note The Alarm register can only be written when the corresponding Alarm + * is disabled (Use @ref LL_RTC_ALMA_Disable function). + * @param RTCx RTC Instance + * @param RTC_Format This parameter can be one of the following values: + * @arg @ref LL_RTC_FORMAT_BIN + * @arg @ref LL_RTC_FORMAT_BCD + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure that + * contains the alarm configuration parameters. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: ALARMA registers are configured + * - ERROR: ALARMA registers are not configured + */ +ErrorStatus LL_RTC_ALMA_Init(RTC_TypeDef *RTCx, uint32_t RTC_Format, LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Check the parameters */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + assert_param(IS_LL_RTC_FORMAT(RTC_Format)); + assert_param(IS_LL_RTC_ALMA_MASK(RTC_AlarmStruct->AlarmMask)); + assert_param(IS_LL_RTC_ALMA_DATE_WEEKDAY_SEL(RTC_AlarmStruct->AlarmDateWeekDaySel)); + + if (RTC_Format == LL_RTC_FORMAT_BIN) + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(RTC_AlarmStruct->AlarmTime.Hours)); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(RTC_AlarmStruct->AlarmTime.Hours)); + } + assert_param(IS_LL_RTC_MINUTES(RTC_AlarmStruct->AlarmTime.Minutes)); + assert_param(IS_LL_RTC_SECONDS(RTC_AlarmStruct->AlarmTime.Seconds)); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + if (LL_RTC_GetHourFormat(RTCx) != LL_RTC_HOURFORMAT_24HOUR) + { + assert_param(IS_LL_RTC_HOUR12(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + assert_param(IS_LL_RTC_TIME_FORMAT(RTC_AlarmStruct->AlarmTime.TimeFormat)); + } + else + { + RTC_AlarmStruct->AlarmTime.TimeFormat = 0x00U; + assert_param(IS_LL_RTC_HOUR24(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Hours))); + } + + assert_param(IS_LL_RTC_MINUTES(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Minutes))); + assert_param(IS_LL_RTC_SECONDS(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmTime.Seconds))); + + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + assert_param(IS_LL_RTC_DAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + else + { + assert_param(IS_LL_RTC_WEEKDAY(__LL_RTC_CONVERT_BCD2BIN(RTC_AlarmStruct->AlarmDateWeekDay))); + } + } + + /* Disable the write protection for RTC registers */ + LL_RTC_DisableWriteProtection(RTCx); + + /* Select weekday selection */ + if (RTC_AlarmStruct->AlarmDateWeekDaySel == LL_RTC_ALMA_DATEWEEKDAYSEL_DATE) + { + /* Set the date for ALARM */ + LL_RTC_ALMA_DisableWeekday(RTCx); + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMA_SetDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + else + { + LL_RTC_ALMA_SetDay(RTCx, __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmDateWeekDay)); + } + } + else + { + /* Set the week day for ALARM */ + LL_RTC_ALMA_EnableWeekday(RTCx); + LL_RTC_ALMA_SetWeekDay(RTCx, RTC_AlarmStruct->AlarmDateWeekDay); + } + + /* Configure the Alarm register */ + if (RTC_Format != LL_RTC_FORMAT_BIN) + { + LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, RTC_AlarmStruct->AlarmTime.Hours, + RTC_AlarmStruct->AlarmTime.Minutes, RTC_AlarmStruct->AlarmTime.Seconds); + } + else + { + LL_RTC_ALMA_ConfigTime(RTCx, RTC_AlarmStruct->AlarmTime.TimeFormat, + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Hours), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Minutes), + __LL_RTC_CONVERT_BIN2BCD(RTC_AlarmStruct->AlarmTime.Seconds)); + } + /* Set ALARM mask */ + LL_RTC_ALMA_SetMask(RTCx, RTC_AlarmStruct->AlarmMask); + + /* Enable the write protection for RTC registers */ + LL_RTC_EnableWriteProtection(RTCx); + + return SUCCESS; +} + +/** + * @brief Set each @ref LL_RTC_AlarmTypeDef of ALARMA field to default value (Time = 00h:00mn:00sec / + * Day = 1st day of the month/Mask = all fields are masked). + * @param RTC_AlarmStruct pointer to a @ref LL_RTC_AlarmTypeDef structure which will be initialized. + * @retval None + */ +void LL_RTC_ALMA_StructInit(LL_RTC_AlarmTypeDef *RTC_AlarmStruct) +{ + /* Alarm Time Settings : Time = 00h:00mn:00sec */ + RTC_AlarmStruct->AlarmTime.TimeFormat = LL_RTC_ALMA_TIME_FORMAT_AM; + RTC_AlarmStruct->AlarmTime.Hours = 0U; + RTC_AlarmStruct->AlarmTime.Minutes = 0U; + RTC_AlarmStruct->AlarmTime.Seconds = 0U; + + /* Alarm Day Settings : Day = 1st day of the month */ + RTC_AlarmStruct->AlarmDateWeekDaySel = LL_RTC_ALMA_DATEWEEKDAYSEL_DATE; + RTC_AlarmStruct->AlarmDateWeekDay = 1U; + + /* Alarm Masks Settings : Mask = all fields are not masked */ + RTC_AlarmStruct->AlarmMask = LL_RTC_ALMA_MASK_NONE; +} + +/** + * @brief Enters the RTC Initialization mode. + * @note The RTC Initialization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC is in Init mode + * - ERROR: RTC is not in Init mode + */ +ErrorStatus LL_RTC_EnterInitMode(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_INITMODE_TIMEOUT; + ErrorStatus status = SUCCESS; + uint32_t tmp = 0U; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Check if the Initialization mode is set */ + if (LL_RTC_IsActiveFlag_INIT(RTCx) == 0U) + { + /* Set the Initialization mode */ + LL_RTC_EnableInitMode(RTCx); + + /* Wait till RTC is in INIT state and if Time out is reached exit */ + tmp = LL_RTC_IsActiveFlag_INIT(RTCx); + while ((timeout != 0U) && (tmp != 1U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout --; + } + tmp = LL_RTC_IsActiveFlag_INIT(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + } + return status; +} + +/** + * @brief Exit the RTC Initialization mode. + * @note When the initialization sequence is complete, the calendar restarts + * counting after 4 RTCCLK cycles. + * @note The RTC Initialization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC exited from in Init mode + * - ERROR: Not applicable + */ +ErrorStatus LL_RTC_ExitInitMode(RTC_TypeDef *RTCx) +{ + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Disable initialization mode */ + LL_RTC_DisableInitMode(RTCx); + + return SUCCESS; +} + +/** + * @brief Waits until the RTC Time and Day registers (RTC_TR and RTC_DR) are + * synchronized with RTC APB clock. + * @note The RTC Resynchronization mode is write protected, use the + * @ref LL_RTC_DisableWriteProtection before calling this function. + * @note To read the calendar through the shadow registers after calendar + * initialization, calendar update or after wakeup from low power modes + * the software must first clear the RSF flag. + * The software must then wait until it is set again before reading + * the calendar, which means that the calendar registers have been + * correctly copied into the RTC_TR and RTC_DR shadow registers. + * @param RTCx RTC Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: RTC registers are synchronised + * - ERROR: RTC registers are not synchronised + */ +ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx) +{ + __IO uint32_t timeout = RTC_SYNCHRO_TIMEOUT; + ErrorStatus status = SUCCESS; + uint32_t tmp = 0U; + + /* Check the parameter */ + assert_param(IS_RTC_ALL_INSTANCE(RTCx)); + + /* Clear RSF flag */ + LL_RTC_ClearFlag_RS(RTCx); + + /* Wait the registers to be synchronised */ + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + while ((timeout != 0U) && (tmp != 1U)) + { + if (LL_SYSTICK_IsActiveCounterFlag() == 1U) + { + timeout--; + } + tmp = LL_RTC_IsActiveFlag_RS(RTCx); + if (timeout == 0U) + { + status = ERROR; + } + } + + return (status); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined(RTC) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_spi.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_spi.c new file mode 100644 index 0000000000..e1d46c9e69 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_spi.c @@ -0,0 +1,549 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_spi.c + * @author MCD Application Team + * @brief SPI LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_spi.h" +#include "stm32wl3x_ll_bus.h" +#include "stm32wl3x_ll_rcc.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (SPI1) || defined (SPI3) + +/** @addtogroup SPI_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SPI_LL_Private_Constants SPI Private Constants + * @{ + */ +/* SPI registers Masks */ +#define SPI_CR1_CLEAR_MASK (SPI_CR1_CPHA | SPI_CR1_CPOL | SPI_CR1_MSTR | \ + SPI_CR1_BR | SPI_CR1_LSBFIRST | SPI_CR1_SSI | \ + SPI_CR1_SSM | SPI_CR1_RXONLY | SPI_CR1_CRCL | \ + SPI_CR1_CRCNEXT | SPI_CR1_CRCEN | SPI_CR1_BIDIOE | \ + SPI_CR1_BIDIMODE) +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPI_LL_Private_Macros SPI Private Macros + * @{ + */ +#define IS_LL_SPI_TRANSFER_DIRECTION(__VALUE__) (((__VALUE__) == LL_SPI_FULL_DUPLEX) \ + || ((__VALUE__) == LL_SPI_SIMPLEX_RX) \ + || ((__VALUE__) == LL_SPI_HALF_DUPLEX_RX) \ + || ((__VALUE__) == LL_SPI_HALF_DUPLEX_TX)) + +#define IS_LL_SPI_MODE(__VALUE__) (((__VALUE__) == LL_SPI_MODE_MASTER) \ + || ((__VALUE__) == LL_SPI_MODE_SLAVE)) + +#define IS_LL_SPI_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_SPI_DATAWIDTH_4BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_5BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_6BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_7BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_8BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_9BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_10BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_11BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_12BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_13BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_14BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_15BIT) \ + || ((__VALUE__) == LL_SPI_DATAWIDTH_16BIT)) + +#define IS_LL_SPI_POLARITY(__VALUE__) (((__VALUE__) == LL_SPI_POLARITY_LOW) \ + || ((__VALUE__) == LL_SPI_POLARITY_HIGH)) + +#define IS_LL_SPI_PHASE(__VALUE__) (((__VALUE__) == LL_SPI_PHASE_1EDGE) \ + || ((__VALUE__) == LL_SPI_PHASE_2EDGE)) + +#define IS_LL_SPI_NSS(__VALUE__) (((__VALUE__) == LL_SPI_NSS_SOFT) \ + || ((__VALUE__) == LL_SPI_NSS_HARD_INPUT) \ + || ((__VALUE__) == LL_SPI_NSS_HARD_OUTPUT)) + +#define IS_LL_SPI_BAUDRATE(__VALUE__) (((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV2) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV4) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV8) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV16) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV32) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV64) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV128) \ + || ((__VALUE__) == LL_SPI_BAUDRATEPRESCALER_DIV256)) + +#define IS_LL_SPI_BITORDER(__VALUE__) (((__VALUE__) == LL_SPI_LSB_FIRST) \ + || ((__VALUE__) == LL_SPI_MSB_FIRST)) + +#define IS_LL_SPI_CRCCALCULATION(__VALUE__) (((__VALUE__) == LL_SPI_CRCCALCULATION_ENABLE) \ + || ((__VALUE__) == LL_SPI_CRCCALCULATION_DISABLE)) + +#define IS_LL_SPI_CRC_POLYNOMIAL(__VALUE__) ((__VALUE__) >= 0x1U) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPI_LL_Exported_Functions + * @{ + */ + +/** @addtogroup SPI_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the SPI registers to their default reset values. + * @param SPIx SPI Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are de-initialized + * - ERROR: SPI registers are not de-initialized + */ +ErrorStatus LL_SPI_DeInit(SPI_TypeDef *SPIx) +{ + ErrorStatus status = ERROR; + + /* Check the parameters */ + assert_param(IS_SPI_ALL_INSTANCE(SPIx)); + +#if defined(SPI1) + if (SPIx == SPI1) + { + /* Force reset of SPI clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI1); + + /* Release reset of SPI clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI1); + + status = SUCCESS; + } +#endif /* SPI1 */ +#if defined(SPI3) + if (SPIx == SPI3) + { + /* Force reset of SPI clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_SPI3); + + /* Release reset of SPI clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_SPI3); + + status = SUCCESS; + } +#endif /* SPI3 */ + + return status; +} + +/** + * @brief Initialize the SPI registers according to the specified parameters in SPI_InitStruct. + * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), + * SPI peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param SPIx SPI Instance + * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure + * @retval An ErrorStatus enumeration value. (Return always SUCCESS) + */ +ErrorStatus LL_SPI_Init(SPI_TypeDef *SPIx, LL_SPI_InitTypeDef *SPI_InitStruct) +{ + ErrorStatus status = ERROR; + + /* Check the SPI Instance SPIx*/ + assert_param(IS_SPI_ALL_INSTANCE(SPIx)); + + /* Check the SPI parameters from SPI_InitStruct*/ + assert_param(IS_LL_SPI_TRANSFER_DIRECTION(SPI_InitStruct->TransferDirection)); + assert_param(IS_LL_SPI_MODE(SPI_InitStruct->Mode)); + assert_param(IS_LL_SPI_DATAWIDTH(SPI_InitStruct->DataWidth)); + assert_param(IS_LL_SPI_POLARITY(SPI_InitStruct->ClockPolarity)); + assert_param(IS_LL_SPI_PHASE(SPI_InitStruct->ClockPhase)); + assert_param(IS_LL_SPI_NSS(SPI_InitStruct->NSS)); + assert_param(IS_LL_SPI_BAUDRATE(SPI_InitStruct->BaudRate)); + assert_param(IS_LL_SPI_BITORDER(SPI_InitStruct->BitOrder)); + assert_param(IS_LL_SPI_CRCCALCULATION(SPI_InitStruct->CRCCalculation)); + + if (LL_SPI_IsEnabled(SPIx) == 0x00000000U) + { + /*---------------------------- SPIx CR1 Configuration ------------------------ + * Configure SPIx CR1 with parameters: + * - TransferDirection: SPI_CR1_BIDIMODE, SPI_CR1_BIDIOE and SPI_CR1_RXONLY bits + * - Master/Slave Mode: SPI_CR1_MSTR bit + * - ClockPolarity: SPI_CR1_CPOL bit + * - ClockPhase: SPI_CR1_CPHA bit + * - NSS management: SPI_CR1_SSM bit + * - BaudRate prescaler: SPI_CR1_BR[2:0] bits + * - BitOrder: SPI_CR1_LSBFIRST bit + * - CRCCalculation: SPI_CR1_CRCEN bit + */ + MODIFY_REG(SPIx->CR1, + SPI_CR1_CLEAR_MASK, + SPI_InitStruct->TransferDirection | SPI_InitStruct->Mode | + SPI_InitStruct->ClockPolarity | SPI_InitStruct->ClockPhase | + SPI_InitStruct->NSS | SPI_InitStruct->BaudRate | + SPI_InitStruct->BitOrder | SPI_InitStruct->CRCCalculation); + + /*---------------------------- SPIx CR2 Configuration ------------------------ + * Configure SPIx CR2 with parameters: + * - DataWidth: DS[3:0] bits + * - NSS management: SSOE bit + */ + MODIFY_REG(SPIx->CR2, + SPI_CR2_DS | SPI_CR2_SSOE, + SPI_InitStruct->DataWidth | (SPI_InitStruct->NSS >> 16U)); + + /* Set Rx FIFO to Quarter (1 Byte) in case of 8 Bits mode. No DataPacking by default */ + if (SPI_InitStruct->DataWidth < LL_SPI_DATAWIDTH_9BIT) + { + LL_SPI_SetRxFIFOThreshold(SPIx, LL_SPI_RX_FIFO_TH_QUARTER); + } + + /*---------------------------- SPIx CRCPR Configuration ---------------------- + * Configure SPIx CRCPR with parameters: + * - CRCPoly: CRCPOLY[15:0] bits + */ + if (SPI_InitStruct->CRCCalculation == LL_SPI_CRCCALCULATION_ENABLE) + { + assert_param(IS_LL_SPI_CRC_POLYNOMIAL(SPI_InitStruct->CRCPoly)); + LL_SPI_SetCRCPolynomial(SPIx, SPI_InitStruct->CRCPoly); + } + status = SUCCESS; + } + + /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ + CLEAR_BIT(SPIx->I2SCFGR, SPI_I2SCFGR_I2SMOD); + return status; +} + +/** + * @brief Set each @ref LL_SPI_InitTypeDef field to default value. + * @param SPI_InitStruct pointer to a @ref LL_SPI_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_SPI_StructInit(LL_SPI_InitTypeDef *SPI_InitStruct) +{ + /* Set SPI_InitStruct fields to default values */ + SPI_InitStruct->TransferDirection = LL_SPI_FULL_DUPLEX; + SPI_InitStruct->Mode = LL_SPI_MODE_SLAVE; + SPI_InitStruct->DataWidth = LL_SPI_DATAWIDTH_8BIT; + SPI_InitStruct->ClockPolarity = LL_SPI_POLARITY_LOW; + SPI_InitStruct->ClockPhase = LL_SPI_PHASE_1EDGE; + SPI_InitStruct->NSS = LL_SPI_NSS_HARD_INPUT; + SPI_InitStruct->BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2; + SPI_InitStruct->BitOrder = LL_SPI_MSB_FIRST; + SPI_InitStruct->CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE; + SPI_InitStruct->CRCPoly = 7U; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup I2S_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup I2S_LL_Private_Constants I2S Private Constants + * @{ + */ +/* I2S registers Masks */ +#define I2S_I2SCFGR_CLEAR_MASK (SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | \ + SPI_I2SCFGR_CKPOL | SPI_I2SCFGR_I2SSTD | \ + SPI_I2SCFGR_I2SCFG | SPI_I2SCFGR_I2SMOD ) + +#define I2S_I2SPR_CLEAR_MASK 0x0002U +/** + * @} + */ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup I2S_LL_Private_Macros I2S Private Macros + * @{ + */ + +#define IS_LL_I2S_DATAFORMAT(__VALUE__) (((__VALUE__) == LL_I2S_DATAFORMAT_16B) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_16B_EXTENDED) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_24B) \ + || ((__VALUE__) == LL_I2S_DATAFORMAT_32B)) + +#define IS_LL_I2S_CPOL(__VALUE__) (((__VALUE__) == LL_I2S_POLARITY_LOW) \ + || ((__VALUE__) == LL_I2S_POLARITY_HIGH)) + +#define IS_LL_I2S_STANDARD(__VALUE__) (((__VALUE__) == LL_I2S_STANDARD_PHILIPS) \ + || ((__VALUE__) == LL_I2S_STANDARD_MSB) \ + || ((__VALUE__) == LL_I2S_STANDARD_LSB) \ + || ((__VALUE__) == LL_I2S_STANDARD_PCM_SHORT) \ + || ((__VALUE__) == LL_I2S_STANDARD_PCM_LONG)) + +#define IS_LL_I2S_MODE(__VALUE__) (((__VALUE__) == LL_I2S_MODE_SLAVE_TX) \ + || ((__VALUE__) == LL_I2S_MODE_SLAVE_RX) \ + || ((__VALUE__) == LL_I2S_MODE_MASTER_TX) \ + || ((__VALUE__) == LL_I2S_MODE_MASTER_RX)) + +#define IS_LL_I2S_MCLK_OUTPUT(__VALUE__) (((__VALUE__) == LL_I2S_MCLK_OUTPUT_ENABLE) \ + || ((__VALUE__) == LL_I2S_MCLK_OUTPUT_DISABLE)) + +#define IS_LL_I2S_AUDIO_FREQ(__VALUE__) ((((__VALUE__) >= LL_I2S_AUDIOFREQ_8K) \ + && ((__VALUE__) <= LL_I2S_AUDIOFREQ_192K)) \ + || ((__VALUE__) == LL_I2S_AUDIOFREQ_DEFAULT)) + +#define IS_LL_I2S_PRESCALER_LINEAR(__VALUE__) ((__VALUE__) >= 0x2U) + +#define IS_LL_I2S_PRESCALER_PARITY(__VALUE__) (((__VALUE__) == LL_I2S_PRESCALER_PARITY_EVEN) \ + || ((__VALUE__) == LL_I2S_PRESCALER_PARITY_ODD)) +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup I2S_LL_Exported_Functions + * @{ + */ + +/** @addtogroup I2S_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the SPI/I2S registers to their default reset values. + * @param SPIx SPI Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are de-initialized + * - ERROR: SPI registers are not de-initialized + */ +ErrorStatus LL_I2S_DeInit(SPI_TypeDef *SPIx) +{ + return LL_SPI_DeInit(SPIx); +} + +/** + * @brief Initializes the SPI/I2S registers according to the specified parameters in I2S_InitStruct. + * @note As some bits in SPI configuration registers can only be written when the SPI is disabled (SPI_CR1_SPE bit =0), + * SPI peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned. + * @param SPIx SPI Instance + * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SPI registers are Initialized + * - ERROR: SPI registers are not Initialized + */ +ErrorStatus LL_I2S_Init(SPI_TypeDef *SPIx, LL_I2S_InitTypeDef *I2S_InitStruct) +{ + uint32_t i2sdiv = 2U; + uint32_t i2sodd = 0U; + uint32_t packetlength = 1U; + uint32_t tmp; + uint32_t sourceclock, rcc_clock; + ErrorStatus status = ERROR; + + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(SPIx)); + assert_param(IS_LL_I2S_MODE(I2S_InitStruct->Mode)); + assert_param(IS_LL_I2S_STANDARD(I2S_InitStruct->Standard)); + assert_param(IS_LL_I2S_DATAFORMAT(I2S_InitStruct->DataFormat)); + assert_param(IS_LL_I2S_MCLK_OUTPUT(I2S_InitStruct->MCLKOutput)); + assert_param(IS_LL_I2S_AUDIO_FREQ(I2S_InitStruct->AudioFreq)); + assert_param(IS_LL_I2S_CPOL(I2S_InitStruct->ClockPolarity)); + + if (LL_I2S_IsEnabled(SPIx) == 0x00000000U) + { + /*---------------------------- SPIx I2SCFGR Configuration -------------------- + * Configure SPIx I2SCFGR with parameters: + * - Mode: SPI_I2SCFGR_I2SCFG[1:0] bit + * - Standard: SPI_I2SCFGR_I2SSTD[1:0] and SPI_I2SCFGR_PCMSYNC bits + * - DataFormat: SPI_I2SCFGR_CHLEN and SPI_I2SCFGR_DATLEN bits + * - ClockPolarity: SPI_I2SCFGR_CKPOL bit + */ + + /* Write to SPIx I2SCFGR */ + MODIFY_REG(SPIx->I2SCFGR, + I2S_I2SCFGR_CLEAR_MASK, + I2S_InitStruct->Mode | I2S_InitStruct->Standard | + I2S_InitStruct->DataFormat | I2S_InitStruct->ClockPolarity | + SPI_I2SCFGR_I2SMOD); + + /*---------------------------- SPIx I2SPR Configuration ---------------------- + * Configure SPIx I2SPR with parameters: + * - MCLKOutput: SPI_I2SPR_MCKOE bit + * - AudioFreq: SPI_I2SPR_I2SDIV[7:0] and SPI_I2SPR_ODD bits + */ + + /* If the requested audio frequency is not the default, compute the prescaler (i2sodd, i2sdiv) + * else, default values are used: i2sodd = 0U, i2sdiv = 2U. + */ + if (I2S_InitStruct->AudioFreq != LL_I2S_AUDIOFREQ_DEFAULT) + { + /* Check the frame length (For the Prescaler computing) + * Default value: LL_I2S_DATAFORMAT_16B (packetlength = 1U). + */ + if (I2S_InitStruct->DataFormat != LL_I2S_DATAFORMAT_16B) + { + /* Packet length is 32 bits */ + packetlength = 2U; + } + + /* Retrieve SPI3 I2S Clock Source from RCC */ + rcc_clock = LL_RCC_GetSPI3I2SClockSource(); + + /* Update sourceclock to SPI3 I2S frequency */ + if (rcc_clock == LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT_DIV) + { + sourceclock = 16000000; + } + else if (rcc_clock == LL_RCC_SPI3_I2S_CLKSOURCE_CLK_ROOT) + { + if(LL_RCC_DIRECT_HSE_IsEnabled()) + { + /* HSE_VALUE DIV2 */ + sourceclock = 24000000; + } + else + { + /* RC64MPLL_VALUE DIV2 */ + sourceclock = 32000000; + } + } + else /* RC64MPLL_VALUE */ + { + sourceclock = 64000000; + } + + /* Compute the Real divider depending on the MCLK output state with a floating point */ + if (I2S_InitStruct->MCLKOutput == LL_I2S_MCLK_OUTPUT_ENABLE) + { + /* MCLK output is enabled */ + tmp = (((((sourceclock / 256U) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); + } + else + { + /* MCLK output is disabled */ + tmp = (((((sourceclock / (32U * packetlength)) * 10U) / I2S_InitStruct->AudioFreq)) + 5U); + } + + /* Remove the floating point */ + tmp = tmp / 10U; + + /* Check the parity of the divider */ + i2sodd = (tmp & (uint16_t)0x0001U); + + /* Compute the i2sdiv prescaler */ + i2sdiv = ((tmp - i2sodd) / 2U); + + /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ + i2sodd = (i2sodd << 8U); + } + + /* Test if the divider is 1 or 0 or greater than 0xFF */ + if ((i2sdiv < 2U) || (i2sdiv > 0xFFU)) + { + /* Set the default values */ + i2sdiv = 2U; + i2sodd = 0U; + } + + /* Write to SPIx I2SPR register the computed value */ + WRITE_REG(SPIx->I2SPR, i2sdiv | i2sodd | I2S_InitStruct->MCLKOutput); + + status = SUCCESS; + } + return status; +} + +/** + * @brief Set each @ref LL_I2S_InitTypeDef field to default value. + * @param I2S_InitStruct pointer to a @ref LL_I2S_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_I2S_StructInit(LL_I2S_InitTypeDef *I2S_InitStruct) +{ + /*--------------- Reset I2S init structure parameters values -----------------*/ + I2S_InitStruct->Mode = LL_I2S_MODE_SLAVE_TX; + I2S_InitStruct->Standard = LL_I2S_STANDARD_PHILIPS; + I2S_InitStruct->DataFormat = LL_I2S_DATAFORMAT_16B; + I2S_InitStruct->MCLKOutput = LL_I2S_MCLK_OUTPUT_DISABLE; + I2S_InitStruct->AudioFreq = LL_I2S_AUDIOFREQ_DEFAULT; + I2S_InitStruct->ClockPolarity = LL_I2S_POLARITY_LOW; +} + +/** + * @brief Set linear and parity prescaler. + * @note To calculate value of PrescalerLinear(I2SDIV[7:0] bits) and PrescalerParity(ODD bit)\n + * Check Audio frequency table and formulas inside Reference Manual (SPI/I2S). + * @param SPIx SPI Instance + * @param PrescalerLinear value Min_Data=0x02 and Max_Data=0xFF. + * @param PrescalerParity This parameter can be one of the following values: + * @arg @ref LL_I2S_PRESCALER_PARITY_EVEN + * @arg @ref LL_I2S_PRESCALER_PARITY_ODD + * @retval None + */ +void LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear, uint32_t PrescalerParity) +{ + /* Check the I2S parameters */ + assert_param(IS_I2S_ALL_INSTANCE(SPIx)); + assert_param(IS_LL_I2S_PRESCALER_LINEAR(PrescalerLinear)); + assert_param(IS_LL_I2S_PRESCALER_PARITY(PrescalerParity)); + + /* Write to SPIx I2SPR */ + MODIFY_REG(SPIx->I2SPR, SPI_I2SPR_I2SDIV | SPI_I2SPR_ODD, PrescalerLinear | (PrescalerParity << 8U)); +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* defined (SPI1) || defined (SPI3) */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_system.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_system.c new file mode 100644 index 0000000000..51862bbebc --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_system.c @@ -0,0 +1,211 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_system.c + * @author MCD Application Team + * @brief HAL module driver. + * This is the common part of the HAL initialization + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + */ + +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_system.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +/** @defgroup SYSTEM_LL SYSTEM + * @{ + */ + + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup SYSCFG_IO_Private_Macros SYSTEM Private Macros + * @{ + */ + +#define IS_LL_EXTI_LINE(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL) == 0x00000000U) + +#define IS_LL_EXTI_TYPE(__VALUE__) (((__VALUE__) == LL_EXTI_TYPE_EDGE) \ + || ((__VALUE__) == LL_EXTI_TYPE_LEVEL)) + + +#define IS_LL_EXTI_TRIGGER(__VALUE__) (((__VALUE__) == LL_EXTI_TRIGGER_RISING_EDGE) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING_EDGE) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_BOTH_EDGE) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_LOW_LEVEL) \ + || ((__VALUE__) == LL_EXTI_TRIGGER_HIGH_LEVEL)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SYSCFG_IO_LL_Exported_Functions + * @{ + */ + +/** @addtogroup SYSCFG_IO_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize the SYSCFG_IO registers to their default reset values. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SYSCFG_IO registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_SYSCFG_IO_DeInit(void) +{ + /* I/O Interrupt detection type register set to default reset values */ + LL_SYSCFG_WriteReg(IO_DTR, 0x00000000U); + + /* I/O Interrupt Edge register set to default reset values */ + LL_SYSCFG_WriteReg(IO_IBER, 0x00000000U); + + /* I/O Interrupt polarity event register set to default reset values */ + LL_SYSCFG_WriteReg(IO_IEVR, 0x00000000U); + + /* I/O Interrupt Enable register set to default reset values */ + LL_SYSCFG_WriteReg(IO_IER, 0x00000000U); + + /* Clear all the I/O Interrupt */ + LL_SYSCFG_WriteReg(IO_ISCR, LL_EXTI_LINE_ALL); + + return SUCCESS; +} + +/** + * @brief Initialize the SYSCFG_IO registers according to the specified parameters in SYSCFG_IO_InitStruct. + * @param SYSCFG_IO_InitStruct pointer to a @ref LL_SYSCFG_IO_InitTypeDef structure. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: SYSCFG_IO registers are initialized + * - ERROR: not applicable + */ +ErrorStatus LL_SYSCFG_IO_Init(LL_SYSCFG_IO_InitTypeDef *SYSCFG_IO_InitStruct) +{ + ErrorStatus status = SUCCESS; + /* Check the parameters */ + assert_param(IS_LL_EXTI_LINE(SYSCFG_IO_InitStruct->Line)); + assert_param(IS_FUNCTIONAL_STATE(SYSCFG_IO_InitStruct->LineCommand)); + assert_param(IS_LL_EXTI_TYPE(SYSCFG_IO_InitStruct->Type)); + + /* ENABLE LineCommand */ + if (SYSCFG_IO_InitStruct->LineCommand != DISABLE) + { + assert_param(IS_LL_EXTI_TRIGGER(SYSCFG_IO_InitStruct->Trigger)); + + /* Configure SYSCFG IO Lines in range from PA0 to PB15 */ + if (SYSCFG_IO_InitStruct->Line != LL_EXTI_LINE_NONE) + { + /* Set the IT Type on provided Lines */ + LL_EXTI_EnableEdgeDetection(SYSCFG_IO_InitStruct->Line); + + if (SYSCFG_IO_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE) + { + switch (SYSCFG_IO_InitStruct->Trigger) + { + case LL_EXTI_TRIGGER_RISING_EDGE: + LL_EXTI_EnableEdgeDetection(SYSCFG_IO_InitStruct->Line); + LL_EXTI_EnableRisingTrig(SYSCFG_IO_InitStruct->Line); + break; + case LL_EXTI_TRIGGER_FALLING_EDGE: + LL_EXTI_EnableEdgeDetection(SYSCFG_IO_InitStruct->Line); + LL_EXTI_DisableRisingTrig(SYSCFG_IO_InitStruct->Line); + break; + case LL_EXTI_TRIGGER_BOTH_EDGE: + LL_EXTI_EnableBothEdgeTrig(SYSCFG_IO_InitStruct->Line); + LL_EXTI_DisableRisingTrig(SYSCFG_IO_InitStruct->Line); + break; + case LL_EXTI_TRIGGER_LOW_LEVEL: + LL_EXTI_DisableEdgeDetection(SYSCFG_IO_InitStruct->Line); + LL_EXTI_DisableRisingTrig(SYSCFG_IO_InitStruct->Line); + break; + case LL_EXTI_TRIGGER_HIGH_LEVEL: + LL_EXTI_DisableEdgeDetection(SYSCFG_IO_InitStruct->Line); + LL_EXTI_EnableRisingTrig(SYSCFG_IO_InitStruct->Line); + break; + default: + status = ERROR; + break; + } + LL_EXTI_EnableIT(SYSCFG_IO_InitStruct->Line); + LL_EXTI_ClearFlag(SYSCFG_IO_InitStruct->Line); + } + } + /* DISABLE LineCommand */ + else + { + LL_EXTI_DisableIT(SYSCFG_IO_InitStruct->Line); + } + } + return status; +} + +/** + * @brief Set each @ref LL_SYSCFG_IO_InitTypeDef field to default value. + * @param SYSCFG_IO_InitStruct Pointer to a @ref LL_SYSCFG_IO_InitTypeDef structure. + * @retval None + */ +void LL_SYSCFG_IO_StructInit(LL_SYSCFG_IO_InitTypeDef *SYSCFG_IO_InitStruct) +{ + SYSCFG_IO_InitStruct->Line = LL_EXTI_LINE_NONE; + SYSCFG_IO_InitStruct->LineCommand = DISABLE; + SYSCFG_IO_InitStruct->Type = LL_EXTI_TYPE_EDGE; + SYSCFG_IO_InitStruct->Trigger = LL_EXTI_TRIGGER_NONE; +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ \ No newline at end of file diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_tim.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_tim.c new file mode 100644 index 0000000000..cf4ca9b5d3 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_tim.c @@ -0,0 +1,957 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_tim.c + * @author MCD Application Team + * @brief TIM LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_tim.h" +#include "stm32wl3x_ll_bus.h" + +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined (TIM2) || defined (TIM16) + +/** @addtogroup TIM_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup TIM_LL_Private_Macros + * @{ + */ +#define IS_LL_TIM_COUNTERMODE(__VALUE__) (((__VALUE__) == LL_TIM_COUNTERMODE_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_DOWN) \ + || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP_DOWN)) + +#define IS_LL_TIM_CLOCKDIVISION(__VALUE__) (((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV1) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV2) \ + || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV4)) + +#define IS_LL_TIM_OCMODE(__VALUE__) (((__VALUE__) == LL_TIM_OCMODE_FROZEN) \ + || ((__VALUE__) == LL_TIM_OCMODE_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_TOGGLE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_INACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_FORCED_ACTIVE) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_PWM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_RETRIG_OPM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_RETRIG_OPM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_COMBINED_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_COMBINED_PWM2) \ + || ((__VALUE__) == LL_TIM_OCMODE_ASYMMETRIC_PWM1) \ + || ((__VALUE__) == LL_TIM_OCMODE_ASYMMETRIC_PWM2)) + +#define IS_LL_TIM_OCSTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCSTATE_DISABLE) \ + || ((__VALUE__) == LL_TIM_OCSTATE_ENABLE)) + +#define IS_LL_TIM_OCPOLARITY(__VALUE__) (((__VALUE__) == LL_TIM_OCPOLARITY_HIGH) \ + || ((__VALUE__) == LL_TIM_OCPOLARITY_LOW)) + +#define IS_LL_TIM_OCIDLESTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCIDLESTATE_LOW) \ + || ((__VALUE__) == LL_TIM_OCIDLESTATE_HIGH)) + +#define IS_LL_TIM_ACTIVEINPUT(__VALUE__) (((__VALUE__) == LL_TIM_ACTIVEINPUT_DIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_INDIRECTTI) \ + || ((__VALUE__) == LL_TIM_ACTIVEINPUT_TRC)) + +#define IS_LL_TIM_ICPSC(__VALUE__) (((__VALUE__) == LL_TIM_ICPSC_DIV1) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV2) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV4) \ + || ((__VALUE__) == LL_TIM_ICPSC_DIV8)) + +#define IS_LL_TIM_IC_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_IC_FILTER_FDIV1) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N2) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N4) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N8) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N5) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N6) \ + || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N8)) + +#define IS_LL_TIM_IC_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_BOTHEDGE)) + +#define IS_LL_TIM_ENCODERMODE(__VALUE__) (((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI1) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI2) \ + || ((__VALUE__) == LL_TIM_ENCODERMODE_X4_TI12)) + +#define IS_LL_TIM_IC_POLARITY_ENCODER(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ + || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING)) + +#define IS_LL_TIM_OSSR_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSR_DISABLE) \ + || ((__VALUE__) == LL_TIM_OSSR_ENABLE)) + +#define IS_LL_TIM_OSSI_STATE(__VALUE__) (((__VALUE__) == LL_TIM_OSSI_DISABLE) \ + || ((__VALUE__) == LL_TIM_OSSI_ENABLE)) + +#define IS_LL_TIM_LOCK_LEVEL(__VALUE__) (((__VALUE__) == LL_TIM_LOCKLEVEL_OFF) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_1) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_2) \ + || ((__VALUE__) == LL_TIM_LOCKLEVEL_3)) + +#define IS_LL_TIM_BREAK_STATE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_DISABLE) \ + || ((__VALUE__) == LL_TIM_BREAK_ENABLE)) + +#define IS_LL_TIM_BREAK_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_POLARITY_LOW) \ + || ((__VALUE__) == LL_TIM_BREAK_POLARITY_HIGH)) + +#define IS_LL_TIM_BREAK_AFMODE(__VALUE__) (((__VALUE__) == LL_TIM_BREAK_AFMODE_INPUT) \ + || ((__VALUE__) == LL_TIM_BREAK_AFMODE_BIDIRECTIONAL)) + +#define IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(__VALUE__) (((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_DISABLE) \ + || ((__VALUE__) == LL_TIM_AUTOMATICOUTPUT_ENABLE)) +/** + * @} + */ + + +/* Private function prototypes -----------------------------------------------*/ +/** @defgroup TIM_LL_Private_Functions TIM Private Functions + * @{ + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup TIM_LL_Exported_Functions + * @{ + */ + +/** @addtogroup TIM_LL_EF_Init + * @{ + */ + +/** + * @brief Set TIMx registers to their reset values. + * @param TIMx Timer instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: invalid TIMx instance + */ +ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx) +{ + ErrorStatus result = SUCCESS; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + + if (TIMx == TIM2) + { + LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_TIM2); + LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_TIM2); + } + else if (TIMx == TIM16) + { + LL_APB0_GRP1_ForceReset(LL_APB0_GRP1_PERIPH_TIM16); + LL_APB0_GRP1_ReleaseReset(LL_APB0_GRP1_PERIPH_TIM16); + } + else + { + result = ERROR; + } + + return result; +} + +/** + * @brief Set the fields of the time base unit configuration data structure + * to their default values. + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (time base unit configuration data structure) + * @retval None + */ +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct) +{ + /* Set the default configuration */ + TIM_InitStruct->Prescaler = (uint16_t)0x0000; + TIM_InitStruct->CounterMode = LL_TIM_COUNTERMODE_UP; + TIM_InitStruct->Autoreload = 0xFFFFFFFFU; + TIM_InitStruct->ClockDivision = LL_TIM_CLOCKDIVISION_DIV1; + TIM_InitStruct->RepetitionCounter = 0x00000000U; +} + +/** + * @brief Configure the TIMx time base unit. + * @param TIMx Timer Instance + * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure + * (TIMx time base unit configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, const LL_TIM_InitTypeDef *TIM_InitStruct) +{ + uint32_t tmpcr1; + + /* Check the parameters */ + assert_param(IS_TIM_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_COUNTERMODE(TIM_InitStruct->CounterMode)); + assert_param(IS_LL_TIM_CLOCKDIVISION(TIM_InitStruct->ClockDivision)); + + tmpcr1 = LL_TIM_ReadReg(TIMx, CR1); + + if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) + { + /* Select the Counter Mode */ + MODIFY_REG(tmpcr1, (TIM_CR1_DIR | TIM_CR1_CMS), TIM_InitStruct->CounterMode); + } + + if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) + { + /* Set the clock division */ + MODIFY_REG(tmpcr1, TIM_CR1_CKD, TIM_InitStruct->ClockDivision); + } + + /* Write to TIMx CR1 */ + LL_TIM_WriteReg(TIMx, CR1, tmpcr1); + + /* Set the Autoreload value */ + LL_TIM_SetAutoReload(TIMx, TIM_InitStruct->Autoreload); + + /* Set the Prescaler value */ + LL_TIM_SetPrescaler(TIMx, TIM_InitStruct->Prescaler); + + if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) + { + /* Set the Repetition Counter value */ + LL_TIM_SetRepetitionCounter(TIMx, TIM_InitStruct->RepetitionCounter); + } + + /* Generate an update event to reload the Prescaler + and the repetition counter value (if applicable) immediately */ + LL_TIM_GenerateEvent_UPDATE(TIMx); + + return SUCCESS; +} + +/** + * @brief Set the fields of the TIMx output channel configuration data + * structure to their default values. + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure + * (the output channel configuration data structure) + * @retval None + */ +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + /* Set the default configuration */ + TIM_OC_InitStruct->OCMode = LL_TIM_OCMODE_FROZEN; + TIM_OC_InitStruct->OCState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->OCNState = LL_TIM_OCSTATE_DISABLE; + TIM_OC_InitStruct->CompareValue = 0x00000000U; + TIM_OC_InitStruct->OCPolarity = LL_TIM_OCPOLARITY_HIGH; + TIM_OC_InitStruct->OCNPolarity = LL_TIM_OCPOLARITY_HIGH; + TIM_OC_InitStruct->OCIdleState = LL_TIM_OCIDLESTATE_LOW; + TIM_OC_InitStruct->OCNIdleState = LL_TIM_OCIDLESTATE_LOW; +} + +/** + * @brief Configure the TIMx output channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @arg @ref LL_TIM_CHANNEL_CH5 + * @arg @ref LL_TIM_CHANNEL_CH6 + * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration + * data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = OC1Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = OC2Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = OC3Config(TIMx, TIM_OC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = OC4Config(TIMx, TIM_OC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Set the fields of the TIMx input channel configuration data + * structure to their default values. + * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration + * data structure) + * @retval None + */ +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Set the default configuration */ + TIM_ICInitStruct->ICPolarity = LL_TIM_IC_POLARITY_RISING; + TIM_ICInitStruct->ICActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_ICInitStruct->ICPrescaler = LL_TIM_ICPSC_DIV1; + TIM_ICInitStruct->ICFilter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the TIMx input channel. + * @param TIMx Timer Instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data + * structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx output channel is initialized + * - ERROR: TIMx output channel is not initialized + */ +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct) +{ + ErrorStatus result = ERROR; + + switch (Channel) + { + case LL_TIM_CHANNEL_CH1: + result = IC1Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH2: + result = IC2Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH3: + result = IC3Config(TIMx, TIM_IC_InitStruct); + break; + case LL_TIM_CHANNEL_CH4: + result = IC4Config(TIMx, TIM_IC_InitStruct); + break; + default: + break; + } + + return result; +} + +/** + * @brief Fills each TIM_EncoderInitStruct field with its default value + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface + * configuration data structure) + * @retval None + */ +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + /* Set the default configuration */ + TIM_EncoderInitStruct->EncoderMode = LL_TIM_ENCODERMODE_X2_TI1; + TIM_EncoderInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC1ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; + TIM_EncoderInitStruct->IC2Polarity = LL_TIM_IC_POLARITY_RISING; + TIM_EncoderInitStruct->IC2ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; + TIM_EncoderInitStruct->IC2Prescaler = LL_TIM_ICPSC_DIV1; + TIM_EncoderInitStruct->IC2Filter = LL_TIM_IC_FILTER_FDIV1; +} + +/** + * @brief Configure the encoder interface of the timer instance. + * @param TIMx Timer Instance + * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface + * configuration data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, const LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + + /* Check the parameters */ + assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_ENCODERMODE(TIM_EncoderInitStruct->EncoderMode)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC1Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC1ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC1Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC1Filter)); + assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC2Polarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC2ActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC2Prescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC2Filter)); + + /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ + TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Configure TI1 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1ActiveInput >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Filter >> 16U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Prescaler >> 16U); + + /* Configure TI2 */ + tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2ActiveInput >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Filter >> 8U); + tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Prescaler >> 8U); + + /* Set TI1 and TI2 polarity and enable TI1 and TI2 */ + tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC1Polarity); + tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC2Polarity << 4U); + tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); + + /* Set encoder mode */ + LL_TIM_SetEncoderMode(TIMx, TIM_EncoderInitStruct->EncoderMode); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + + +/** + * @brief Set the fields of the Break and Dead Time configuration data structure + * to their default values. + * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration + * data structure) + * @retval None + */ +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) +{ + /* Set the default configuration */ + TIM_BDTRInitStruct->OSSRState = LL_TIM_OSSR_DISABLE; + TIM_BDTRInitStruct->OSSIState = LL_TIM_OSSI_DISABLE; + TIM_BDTRInitStruct->LockLevel = LL_TIM_LOCKLEVEL_OFF; + TIM_BDTRInitStruct->DeadTime = (uint8_t)0x00; + TIM_BDTRInitStruct->BreakState = LL_TIM_BREAK_DISABLE; + TIM_BDTRInitStruct->BreakPolarity = LL_TIM_BREAK_POLARITY_LOW; + TIM_BDTRInitStruct->BreakAFMode = LL_TIM_BREAK_AFMODE_INPUT; + TIM_BDTRInitStruct->AutomaticOutput = LL_TIM_AUTOMATICOUTPUT_DISABLE; +} + +/** + * @brief Configure the Break and Dead Time feature of the timer instance. + * @note As the bits AOE, BKP, BKE, OSSR, OSSI and DTG[7:0] can be write-locked + * depending on the LOCK configuration, it can be necessary to configure all of + * them during the first write access to the TIMx_BDTR register. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @param TIMx Timer Instance + * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration + * data structure) + * @retval An ErrorStatus enumeration value: + * - SUCCESS: Break and Dead Time is initialized + * - ERROR: not applicable + */ +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, const LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct) +{ + uint32_t tmpbdtr = 0; + + /* Check the parameters */ + assert_param(IS_TIM_BREAK_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OSSR_STATE(TIM_BDTRInitStruct->OSSRState)); + assert_param(IS_LL_TIM_OSSI_STATE(TIM_BDTRInitStruct->OSSIState)); + assert_param(IS_LL_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->LockLevel)); + assert_param(IS_LL_TIM_BREAK_STATE(TIM_BDTRInitStruct->BreakState)); + assert_param(IS_LL_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->BreakPolarity)); + assert_param(IS_LL_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->AutomaticOutput)); + assert_param(IS_LL_TIM_BREAK_AFMODE(TIM_BDTRInitStruct->BreakAFMode)); + + /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, + the OSSI State, the dead time value and the Automatic Output Enable Bit */ + + /* Set the BDTR bits */ + MODIFY_REG(tmpbdtr, TIM_BDTR_DTG, TIM_BDTRInitStruct->DeadTime); + MODIFY_REG(tmpbdtr, TIM_BDTR_LOCK, TIM_BDTRInitStruct->LockLevel); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSI, TIM_BDTRInitStruct->OSSIState); + MODIFY_REG(tmpbdtr, TIM_BDTR_OSSR, TIM_BDTRInitStruct->OSSRState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKE, TIM_BDTRInitStruct->BreakState); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKP, TIM_BDTRInitStruct->BreakPolarity); + MODIFY_REG(tmpbdtr, TIM_BDTR_AOE, TIM_BDTRInitStruct->AutomaticOutput); + MODIFY_REG(tmpbdtr, TIM_BDTR_BKBID, TIM_BDTRInitStruct->BreakAFMode); + + /* Set TIMx_BDTR */ + LL_TIM_WriteReg(TIMx, BDTR, tmpbdtr); + + return SUCCESS; +} +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup TIM_LL_Private_Functions TIM Private Functions + * @brief Private functions + * @{ + */ +/** + * @brief Configure the TIMx output channel 1. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC1Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC1E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC1S); + + /* Set the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC1M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1P, TIM_OCInitStruct->OCPolarity); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1E, TIM_OCInitStruct->OCState); + + if (IS_TIM_BREAK_INSTANCE(TIMx)) + { + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCNState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCNPolarity)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCNIdleState)); + assert_param(IS_LL_TIM_OCIDLESTATE(TIM_OCInitStruct->OCIdleState)); + + /* Set the complementary output Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC1NP, TIM_OCInitStruct->OCNPolarity << 2U); + + /* Set the complementary output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC1NE, TIM_OCInitStruct->OCNState << 2U); + + /* Set the Output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS1, TIM_OCInitStruct->OCIdleState); + + /* Set the complementary output Idle state */ + MODIFY_REG(tmpcr2, TIM_CR2_OIS1N, TIM_OCInitStruct->OCNIdleState << 1U); + } + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH1(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 2. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC2Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr1; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC2E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR1 register value */ + tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC2S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr1, TIM_CCMR1_OC2M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC2P, TIM_OCInitStruct->OCPolarity << 4U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC2E, TIM_OCInitStruct->OCState << 4U); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR1 */ + LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH2(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 3. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC3Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC3E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC3S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC3M, TIM_OCInitStruct->OCMode); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC3P, TIM_OCInitStruct->OCPolarity << 8U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC3E, TIM_OCInitStruct->OCState << 8U); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH3(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx output channel 4. + * @param TIMx Timer Instance + * @param TIM_OCInitStruct pointer to the the TIMx output channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus OC4Config(TIM_TypeDef *TIMx, const LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) +{ + uint32_t tmpccmr2; + uint32_t tmpccer; + uint32_t tmpcr2; + + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); + assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); + assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + CLEAR_BIT(TIMx->CCER, TIM_CCER_CC4E); + + /* Get the TIMx CCER register value */ + tmpccer = LL_TIM_ReadReg(TIMx, CCER); + + /* Get the TIMx CR2 register value */ + tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); + + /* Get the TIMx CCMR2 register value */ + tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); + + /* Reset Capture/Compare selection Bits */ + CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC4S); + + /* Select the Output Compare Mode */ + MODIFY_REG(tmpccmr2, TIM_CCMR2_OC4M, TIM_OCInitStruct->OCMode << 8U); + + /* Set the Output Compare Polarity */ + MODIFY_REG(tmpccer, TIM_CCER_CC4P, TIM_OCInitStruct->OCPolarity << 12U); + + /* Set the Output State */ + MODIFY_REG(tmpccer, TIM_CCER_CC4E, TIM_OCInitStruct->OCState << 12U); + + /* Write to TIMx CR2 */ + LL_TIM_WriteReg(TIMx, CR2, tmpcr2); + + /* Write to TIMx CCMR2 */ + LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); + + /* Set the Capture Compare Register value */ + LL_TIM_OC_SetCompareCH4(TIMx, TIM_OCInitStruct->CompareValue); + + /* Write to TIMx CCER */ + LL_TIM_WriteReg(TIMx, CCER, tmpccer); + + return SUCCESS; +} + + + +/** + * @brief Configure the TIMx input channel 1. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 1 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC1Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC1_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 1: Reset the CC1E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC1E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC1E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC1P | TIM_CCER_CC1NP), + (TIM_ICInitStruct->ICPolarity | TIM_CCER_CC1E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 2. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 2 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC2Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC2_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 2: Reset the CC2E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC2E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR1, + (TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC2E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC2P | TIM_CCER_CC2NP), + ((TIM_ICInitStruct->ICPolarity << 4U) | TIM_CCER_CC2E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 3. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 3 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC3Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC3_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 3: Reset the CC3E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC3E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC3S | TIM_CCMR2_IC3F | TIM_CCMR2_IC3PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); + + /* Select the Polarity and set the CC3E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC3P | TIM_CCER_CC3NP), + ((TIM_ICInitStruct->ICPolarity << 8U) | TIM_CCER_CC3E)); + + return SUCCESS; +} + +/** + * @brief Configure the TIMx input channel 4. + * @param TIMx Timer Instance + * @param TIM_ICInitStruct pointer to the the TIMx input channel 4 configuration data structure + * @retval An ErrorStatus enumeration value: + * - SUCCESS: TIMx registers are de-initialized + * - ERROR: not applicable + */ +static ErrorStatus IC4Config(TIM_TypeDef *TIMx, const LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) +{ + /* Check the parameters */ + assert_param(IS_TIM_CC4_INSTANCE(TIMx)); + assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); + assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); + assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); + assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); + + /* Disable the Channel 4: Reset the CC4E Bit */ + TIMx->CCER &= (uint32_t)~TIM_CCER_CC4E; + + /* Select the Input and set the filter and the prescaler value */ + MODIFY_REG(TIMx->CCMR2, + (TIM_CCMR2_CC4S | TIM_CCMR2_IC4F | TIM_CCMR2_IC4PSC), + (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); + + /* Select the Polarity and set the CC4E Bit */ + MODIFY_REG(TIMx->CCER, + (TIM_CCER_CC4P | TIM_CCER_CC4NP), + ((TIM_ICInitStruct->ICPolarity << 12U) | TIM_CCER_CC4E)); + + return SUCCESS; +} + + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM2 || TIM16 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_usart.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_usart.c new file mode 100644 index 0000000000..b4e2eff264 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_usart.c @@ -0,0 +1,378 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_usart.c + * @author MCD Application Team + * @brief USART LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +#if defined(USE_FULL_LL_DRIVER) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32wl3x_ll_usart.h" +#include "stm32wl3x_ll_rcc.h" +#include "stm32wl3x_ll_bus.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +#if defined(USART1) + +/** @addtogroup USART_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup USART_LL_Private_Constants + * @{ + */ + +#define USART_PERIPHCLK (16000000U) + +/* Definition of default baudrate value used for USART initialisation */ +#define USART_DEFAULT_BAUDRATE (9600U) + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup USART_LL_Private_Macros + * @{ + */ + +#define IS_LL_USART_PRESCALER(__VALUE__) (((__VALUE__) == LL_USART_PRESCALER_DIV1) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV2) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV4) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV6) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV8) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV10) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV12) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV16) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV32) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV64) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV128) \ + || ((__VALUE__) == LL_USART_PRESCALER_DIV256)) + +/* __BAUDRATE__ The maximum Baud Rate is derived from the maximum clock available + * divided by the smallest oversampling used on the USART (i.e. 8) */ +#define IS_LL_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) <= 2000000U) + +/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */ +#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U) + +#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \ + || ((__VALUE__) == LL_USART_DIRECTION_RX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX) \ + || ((__VALUE__) == LL_USART_DIRECTION_TX_RX)) + +#define IS_LL_USART_PARITY(__VALUE__) (((__VALUE__) == LL_USART_PARITY_NONE) \ + || ((__VALUE__) == LL_USART_PARITY_EVEN) \ + || ((__VALUE__) == LL_USART_PARITY_ODD)) + +#define IS_LL_USART_DATAWIDTH(__VALUE__) (((__VALUE__) == LL_USART_DATAWIDTH_7B) \ + || ((__VALUE__) == LL_USART_DATAWIDTH_8B) \ + || ((__VALUE__) == LL_USART_DATAWIDTH_9B)) + +#define IS_LL_USART_OVERSAMPLING(__VALUE__) (((__VALUE__) == LL_USART_OVERSAMPLING_16) \ + || ((__VALUE__) == LL_USART_OVERSAMPLING_8)) + +#define IS_LL_USART_LASTBITCLKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_LASTCLKPULSE_NO_OUTPUT) \ + || ((__VALUE__) == LL_USART_LASTCLKPULSE_OUTPUT)) + +#define IS_LL_USART_CLOCKPHASE(__VALUE__) (((__VALUE__) == LL_USART_PHASE_1EDGE) \ + || ((__VALUE__) == LL_USART_PHASE_2EDGE)) + +#define IS_LL_USART_CLOCKPOLARITY(__VALUE__) (((__VALUE__) == LL_USART_POLARITY_LOW) \ + || ((__VALUE__) == LL_USART_POLARITY_HIGH)) + +#define IS_LL_USART_CLOCKOUTPUT(__VALUE__) (((__VALUE__) == LL_USART_CLOCK_DISABLE) \ + || ((__VALUE__) == LL_USART_CLOCK_ENABLE)) + +#define IS_LL_USART_STOPBITS(__VALUE__) (((__VALUE__) == LL_USART_STOPBITS_0_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_1) \ + || ((__VALUE__) == LL_USART_STOPBITS_1_5) \ + || ((__VALUE__) == LL_USART_STOPBITS_2)) + +#define IS_LL_USART_HWCONTROL(__VALUE__) (((__VALUE__) == LL_USART_HWCONTROL_NONE) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_CTS) \ + || ((__VALUE__) == LL_USART_HWCONTROL_RTS_CTS)) + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USART_LL_Exported_Functions + * @{ + */ + +/** @addtogroup USART_LL_EF_Init + * @{ + */ + +/** + * @brief De-initialize USART registers (Registers restored to their default values). + * @param USARTx USART Instance + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are de-initialized + * - ERROR: USART registers are not de-initialized + */ +ErrorStatus LL_USART_DeInit(const USART_TypeDef *USARTx) +{ + ErrorStatus status = SUCCESS; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + + if (USARTx == USART1) + { + /* Force reset of USART clock */ + LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_USART1); + + /* Release reset of USART clock */ + LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_USART1); + } + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Initialize USART registers according to the specified + * parameters in USART_InitStruct. + * @note As some bits in USART configuration registers can only be written when + * the USART is disabled (USART_CR1_UE bit =0), USART Peripheral should be in disabled state prior calling + * this function. Otherwise, ERROR result will be returned. + * @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0). + * @param USARTx USART Instance + * @param USART_InitStruct pointer to a LL_USART_InitTypeDef structure + * that contains the configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers are initialized according to USART_InitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_Init(USART_TypeDef *USARTx, const LL_USART_InitTypeDef *USART_InitStruct) +{ + ErrorStatus status = ERROR; + uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO; + + /* Check the parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_PRESCALER(USART_InitStruct->PrescalerValue)); + assert_param(IS_LL_USART_BAUDRATE(USART_InitStruct->BaudRate)); + assert_param(IS_LL_USART_DATAWIDTH(USART_InitStruct->DataWidth)); + assert_param(IS_LL_USART_STOPBITS(USART_InitStruct->StopBits)); + assert_param(IS_LL_USART_PARITY(USART_InitStruct->Parity)); + assert_param(IS_LL_USART_DIRECTION(USART_InitStruct->TransferDirection)); + assert_param(IS_LL_USART_HWCONTROL(USART_InitStruct->HardwareFlowControl)); + assert_param(IS_LL_USART_OVERSAMPLING(USART_InitStruct->OverSampling)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /*---------------------------- USART CR1 Configuration --------------------- + * Configure USARTx CR1 (USART Word Length, Parity, Mode and Oversampling bits) with parameters: + * - DataWidth: USART_CR1_M bits according to USART_InitStruct->DataWidth value + * - Parity: USART_CR1_PCE, USART_CR1_PS bits according to USART_InitStruct->Parity value + * - TransferDirection: USART_CR1_TE, USART_CR1_RE bits according to USART_InitStruct->TransferDirection value + * - Oversampling: USART_CR1_OVER8 bit according to USART_InitStruct->OverSampling value. + */ + MODIFY_REG(USARTx->CR1, + (USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | + USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8), + (USART_InitStruct->DataWidth | USART_InitStruct->Parity | + USART_InitStruct->TransferDirection | USART_InitStruct->OverSampling)); + + /*---------------------------- USART CR2 Configuration --------------------- + * Configure USARTx CR2 (Stop bits) with parameters: + * - Stop Bits: USART_CR2_STOP bits according to USART_InitStruct->StopBits value. + * - CLKEN, CPOL, CPHA and LBCL bits are to be configured using LL_USART_ClockInit(). + */ + LL_USART_SetStopBitsLength(USARTx, USART_InitStruct->StopBits); + + /*---------------------------- USART CR3 Configuration --------------------- + * Configure USARTx CR3 (Hardware Flow Control) with parameters: + * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to + * USART_InitStruct->HardwareFlowControl value. + */ + LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl); + + /*---------------------------- USART BRR Configuration --------------------- + * Retrieve Clock frequency used for USART Peripheral + */ + if (USARTx == USART1) + { + periphclk = USART_PERIPHCLK; + } + else + { + /* Nothing to do, as error code is already assigned to ERROR value */ + } + + /* Configure the USART Baud Rate : + - prescaler value is required + - valid baud rate value (different from 0) is required + - Peripheral clock as returned by RCC service, should be valid (different from 0). + */ + if ((periphclk != LL_RCC_PERIPH_FREQUENCY_NO) + && (USART_InitStruct->BaudRate != 0U)) + { + status = SUCCESS; + LL_USART_SetBaudRate(USARTx, + periphclk, + USART_InitStruct->PrescalerValue, + USART_InitStruct->OverSampling, + USART_InitStruct->BaudRate); + + /* Check BRR is greater than or equal to 16d */ + assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR)); + } + + /*---------------------------- USART PRESC Configuration ----------------------- + * Configure USARTx PRESC (Prescaler) with parameters: + * - PrescalerValue: USART_PRESC_PRESCALER bits according to USART_InitStruct->PrescalerValue value. + */ + LL_USART_SetPrescaler(USARTx, USART_InitStruct->PrescalerValue); + } + /* Endif (=> USART not in Disabled state => return ERROR) */ + + return (status); +} + +/** + * @brief Set each @ref LL_USART_InitTypeDef field to default value. + * @param USART_InitStruct pointer to a @ref LL_USART_InitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ + +void LL_USART_StructInit(LL_USART_InitTypeDef *USART_InitStruct) +{ + /* Set USART_InitStruct fields to default values */ + USART_InitStruct->PrescalerValue = LL_USART_PRESCALER_DIV1; + USART_InitStruct->BaudRate = USART_DEFAULT_BAUDRATE; + USART_InitStruct->DataWidth = LL_USART_DATAWIDTH_8B; + USART_InitStruct->StopBits = LL_USART_STOPBITS_1; + USART_InitStruct->Parity = LL_USART_PARITY_NONE ; + USART_InitStruct->TransferDirection = LL_USART_DIRECTION_TX_RX; + USART_InitStruct->HardwareFlowControl = LL_USART_HWCONTROL_NONE; + USART_InitStruct->OverSampling = LL_USART_OVERSAMPLING_16; +} + +/** + * @brief Initialize USART Clock related settings according to the + * specified parameters in the USART_ClockInitStruct. + * @note As some bits in USART configuration registers can only be written when + * the USART is disabled (USART_CR1_UE bit =0), USART Peripheral should be in disabled state prior calling + * this function. Otherwise, ERROR result will be returned. + * @param USARTx USART Instance + * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure + * that contains the Clock configuration information for the specified USART peripheral. + * @retval An ErrorStatus enumeration value: + * - SUCCESS: USART registers related to Clock settings are initialized according + * to USART_ClockInitStruct content + * - ERROR: Problem occurred during USART Registers initialization + */ +ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, const LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + ErrorStatus status = SUCCESS; + + /* Check USART Instance and Clock signal output parameters */ + assert_param(IS_UART_INSTANCE(USARTx)); + assert_param(IS_LL_USART_CLOCKOUTPUT(USART_ClockInitStruct->ClockOutput)); + + /* USART needs to be in disabled state, in order to be able to configure some bits in + CRx registers */ + if (LL_USART_IsEnabled(USARTx) == 0U) + { + /* Ensure USART instance is USART capable */ + assert_param(IS_USART_INSTANCE(USARTx)); + + /* Check clock related parameters */ + assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity)); + assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase)); + assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse)); + + /*---------------------------- USART CR2 Configuration ----------------------- + * Configure USARTx CR2 (Clock signal related bits) with parameters: + * - Clock Output: USART_CR2_CLKEN bit according to USART_ClockInitStruct->ClockOutput value + * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value + * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value + * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value. + */ + MODIFY_REG(USARTx->CR2, + USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL, + USART_ClockInitStruct->ClockOutput | USART_ClockInitStruct->ClockPolarity | + USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse); + } + /* Else (USART not in Disabled state => return ERROR */ + else + { + status = ERROR; + } + + return (status); +} + +/** + * @brief Set each field of a @ref LL_USART_ClockInitTypeDef type structure to default value. + * @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure + * whose fields will be set to default values. + * @retval None + */ +void LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitStruct) +{ + /* Set LL_USART_ClockInitStruct fields with default values */ + USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE; + USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = + LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = + LL_USART_CLOCK_DISABLE */ + USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = + LL_USART_CLOCK_DISABLE */ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* USART1 */ + +/** + * @} + */ + +#endif /* USE_FULL_LL_DRIVER */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_utils.c b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_utils.c new file mode 100644 index 0000000000..d6fbf7db00 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/Src/stm32wl3x_ll_utils.c @@ -0,0 +1,228 @@ +/** + ****************************************************************************** + * @file stm32wl3x_ll_utils.c + * @author MCD Application Team + * @brief UTILS LL module driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* Includes ------------------------------------------------------------------*/ +#include "system_stm32wl3x.h" +#include "stm32wl3x_ll_utils.h" +#include "stm32wl3x_ll_rcc.h" +#include "stm32wl3x_ll_system.h" +#include "stm32wl3x_ll_pwr.h" +#ifdef USE_FULL_ASSERT +#include "stm32_assert.h" +#else +#define assert_param(expr) ((void)0U) +#endif + +/** @addtogroup STM32WL3x_LL_Driver + * @{ + */ + +/** @addtogroup UTILS_LL + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Private_Macros + * @{ + */ +#define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_RC64MPLL_DIV_1) \ + || ((__VALUE__) == LL_RCC_RC64MPLL_DIV_2) \ + || ((__VALUE__) == LL_RCC_RC64MPLL_DIV_4) \ + || ((__VALUE__) == LL_RCC_RC64MPLL_DIV_8) \ + || ((__VALUE__) == LL_RCC_RC64MPLL_DIV_16) \ + || ((__VALUE__) == LL_RCC_RC64MPLL_DIV_32) \ + || ((__VALUE__) == LL_RCC_RC64MPLL_DIV_64)) + +#define IS_LL_UTILS_DIRECT_HSE_DIV(__VALUE__) (((__VALUE__) == LL_RCC_DIRECT_HSE_DIV_1) \ + || ((__VALUE__) == LL_RCC_DIRECT_HSE_DIV_2) \ + || ((__VALUE__) == LL_RCC_DIRECT_HSE_DIV_4) \ + || ((__VALUE__) == LL_RCC_DIRECT_HSE_DIV_8) \ + || ((__VALUE__) == LL_RCC_DIRECT_HSE_DIV_16) \ + || ((__VALUE__) == LL_RCC_DIRECT_HSE_DIV_32)) + + +#define IS_LL_UTILS_HSE_BYPASS(__STATE__) (((__STATE__) == LL_UTILS_HSEBYPASS_ON) \ + || ((__STATE__) == LL_UTILS_HSEBYPASS_OFF)) + +#define countof(a) (sizeof(a) / sizeof(*(a))) +/** + * @} + */ +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UTILS_LL_Exported_Functions + * @{ + */ + +/** @addtogroup UTILS_LL_EF_DELAY + * @{ + */ + +/** + * @brief This function configures the Cortex-M SysTick source to have 1ms time base. + * @note When a RTOS is used, it is recommended to avoid changing the Systick + * configuration by calling this function, for a delay use rather osDelay RTOS service. + * @param HCLKFrequency SysClk frequency in Hz + * @retval None + */ + +void LL_Init1msTick(uint32_t HCLKFrequency) +{ + /* Use frequency provided in argument */ + LL_InitTick(HCLKFrequency, 1000); +} + + +/** + * @brief This function provides accurate delay (in milliseconds) based + * on SysTick counter flag + * @note When a RTOS is used, it is recommended to avoid using blocking delay + * and use rather osDelay service. + * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which + * will configure Systick to 1ms + * @param Delay specifies the delay time length, in milliseconds. + * @retval None + */ +void LL_mDelay(uint32_t Delay) +{ + uint32_t mDelay = Delay; + __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */ + /* Add this code to indicate that local variable is not used */ + ((void)tmp); + + /* Add a period to guaranty minimum wait */ + if (mDelay < LL_MAX_DELAY) + { + mDelay++; + } + + while (mDelay != 0U) + { + if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U) + { + mDelay--; + } + } +} + +/** + * @} + */ + +/** @addtogroup UTILS_LL_EF_SYSTEM + * @{ + */ + +/** + * @brief This function sets directly SystemCoreClock CMSIS variable. + * @note Variable can be calculated also through SystemCoreClockUpdate function. + * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro) + * @retval None + */ +void LL_SetSystemCoreClock(uint32_t HCLKFrequency) +{ + /* HCLK clock frequency */ + SystemCoreClock = HCLKFrequency; +} + +/** + * @brief This function return the System Core Clock expressed in Hz. + * @retval System Core Clock frequency. + */ +uint32_t LL_GetSystemCoreClock(void) +{ + return SystemCoreClock; +} + + +#if defined(STM32WL3XX) +/** + * @brief This function set the HSE XTAL frequency expressed in Hz. + * @param freq HSE XTAL frequency expressed in Hz. + */ +void LL_SetXTALFreq(uint32_t freq) +{ + HSE_xtalFrequency = freq; + + switch(LL_RCC_GetRC64MPLLPrescaler()) + { + case LL_RCC_RC64MPLL_DIV_1: + if (LL_RCC_DIRECT_HSE_IsEnabled()) + SystemCoreClock = HSE_xtalFrequency; + else + SystemCoreClock = (HSE_xtalFrequency/3)*4; + break; + case LL_RCC_RC64MPLL_DIV_2: + if (LL_RCC_DIRECT_HSE_IsEnabled()) + SystemCoreClock = HSE_xtalFrequency/2; + else + SystemCoreClock = (HSE_xtalFrequency/3)*2; + break; + case LL_RCC_RC64MPLL_DIV_4: + SystemCoreClock = HSE_xtalFrequency/3; + break; + case LL_RCC_RC64MPLL_DIV_8: + SystemCoreClock = HSE_xtalFrequency/6; + break; + case LL_RCC_RC64MPLL_DIV_16: + SystemCoreClock = HSE_xtalFrequency/12; + break; + case LL_RCC_RC64MPLL_DIV_32: + SystemCoreClock = HSE_xtalFrequency/24; + break; + case LL_RCC_RC64MPLL_DIV_64: + SystemCoreClock = HSE_xtalFrequency/48; + break; + } +} + +/** + * @brief This function returns the HSE XTAL frequency expressed in Hz. + * @retval HSE XTAL frequency frequency. + */ +uint32_t LL_GetXTALFreq(void) +{ + return HSE_xtalFrequency; +} +#endif /* STM32WL3XX */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/Add button.svg b/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/Add button.svg new file mode 100644 index 0000000000..c211545dad --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/Add button.svg @@ -0,0 +1,2 @@ + + diff --git a/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/Update.svg b/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/Update.svg new file mode 100644 index 0000000000..f88381f1e6 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/Update.svg @@ -0,0 +1,2 @@ + + diff --git a/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/favicon.png b/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/favicon.png new file mode 100644 index 0000000000..06713eec49 Binary files /dev/null and b/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/favicon.png differ diff --git a/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/mini-st_2020.css b/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/mini-st_2020.css new file mode 100644 index 0000000000..db8b406aa4 --- /dev/null +++ b/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/mini-st_2020.css @@ -0,0 +1,1711 @@ +@charset "UTF-8"; +/* + Flavor name: Custom (mini-custom) + Generated online - https://minicss.org/flavors + mini.css version: v3.0.1 +*/ +/* + Browsers resets and base typography. +*/ +/* Core module CSS variable definitions */ +:root { + --fore-color: #03234b; + --secondary-fore-color: #03234b; + --back-color: #ffffff; + --secondary-back-color: #ffffff; + --blockquote-color: #e6007e; + --pre-color: #e6007e; + --border-color: #3cb4e6; + --secondary-border-color: #3cb4e6; + --heading-ratio: 1.2; + --universal-margin: 0.5rem; + --universal-padding: 0.25rem; + --universal-border-radius: 0.075rem; + --background-margin: 1.5%; + --a-link-color: #3cb4e6; + --a-visited-color: #8c0078; } + +html { + font-size: 13.5px; } + +a, b, del, em, i, ins, q, span, strong, u { + font-size: 1em; } + +html, * { + font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; + line-height: 1.25; + -webkit-text-size-adjust: 100%; } + +* { + font-size: 1rem; } + +body { + margin: 0; + color: var(--fore-color); + @background: var(--back-color); + background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; + background-size: var(--background-margin); + } + +details { + display: block; } + +summary { + display: list-item; } + +abbr[title] { + border-bottom: none; + text-decoration: underline dotted; } + +input { + overflow: visible; } + +img { + max-width: 100%; + height: auto; } + +h1, h2, h3, h4, h5, h6 { + line-height: 1.25; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + font-weight: 400; } + h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { + color: var(--secondary-fore-color); + display: block; + margin-top: -0.25rem; } + +h1 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } + +h2 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); + border-style: none none solid none ; + border-width: thin; + border-color: var(--border-color); } +h3 { + font-size: calc(1rem * var(--heading-ratio) ); } + +h4 { + font-size: calc(1rem * var(--heading-ratio)); } + +h5 { + font-size: 1rem; } + +h6 { + font-size: calc(1rem / var(--heading-ratio)); } + +p { + margin: var(--universal-margin); } + +ol, ul { + margin: var(--universal-margin); + padding-left: calc(3 * var(--universal-margin)); } + +b, strong { + font-weight: 700; } + +hr { + box-sizing: content-box; + border: 0; + line-height: 1.25em; + margin: var(--universal-margin); + height: 0.0714285714rem; + background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } + +blockquote { + display: block; + position: relative; + font-style: italic; + color: var(--secondary-fore-color); + margin: var(--universal-margin); + padding: calc(3 * var(--universal-padding)); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.3rem solid var(--blockquote-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + blockquote:before { + position: absolute; + top: calc(0rem - var(--universal-padding)); + left: 0; + font-family: sans-serif; + font-size: 2rem; + font-weight: 800; + content: "\201c"; + color: var(--blockquote-color); } + blockquote[cite]:after { + font-style: normal; + font-size: 0.75em; + font-weight: 700; + content: "\a— " attr(cite); + white-space: pre; } + +code, kbd, pre, samp { + font-family: Menlo, Consolas, monospace; + font-size: 0.85em; } + +code { + background: var(--secondary-back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +kbd { + background: var(--fore-color); + color: var(--back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +pre { + overflow: auto; + background: var(--secondary-back-color); + padding: calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.2857142857rem solid var(--pre-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + +sup, sub, code, kbd { + line-height: 0; + position: relative; + vertical-align: baseline; } + +small, sup, sub, figcaption { + font-size: 0.75em; } + +sup { + top: -0.5em; } + +sub { + bottom: -0.25em; } + +figure { + margin: var(--universal-margin); } + +figcaption { + color: var(--secondary-fore-color); } + +a { + text-decoration: none; } + a:link { + color: var(--a-link-color); } + a:visited { + color: var(--a-visited-color); } + a:hover, a:focus { + text-decoration: underline; } + +/* + Definitions for the grid system, cards and containers. +*/ +.container { + margin: 0 auto; + padding: 0 calc(1.5 * var(--universal-padding)); } + +.row { + box-sizing: border-box; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + margin: 0 0 0 var(--background-margin); } + +.col-sm, +[class^='col-sm-'], +[class^='col-sm-offset-'], +.row[class*='cols-sm-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + +.col-sm, +.row.cols-sm > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + +.col-sm-1, +.row.cols-sm-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + +.col-sm-offset-0 { + margin-left: 0; } + +.col-sm-2, +.row.cols-sm-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + +.col-sm-offset-1 { + margin-left: 8.3333333333%; } + +.col-sm-3, +.row.cols-sm-3 > * { + max-width: 25%; + flex-basis: 25%; } + +.col-sm-offset-2 { + margin-left: 16.6666666667%; } + +.col-sm-4, +.row.cols-sm-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + +.col-sm-offset-3 { + margin-left: 25%; } + +.col-sm-5, +.row.cols-sm-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + +.col-sm-offset-4 { + margin-left: 33.3333333333%; } + +.col-sm-6, +.row.cols-sm-6 > * { + max-width: 50%; + flex-basis: 50%; } + +.col-sm-offset-5 { + margin-left: 41.6666666667%; } + +.col-sm-7, +.row.cols-sm-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + +.col-sm-offset-6 { + margin-left: 50%; } + +.col-sm-8, +.row.cols-sm-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + +.col-sm-offset-7 { + margin-left: 58.3333333333%; } + +.col-sm-9, +.row.cols-sm-9 > * { + max-width: 75%; + flex-basis: 75%; } + +.col-sm-offset-8 { + margin-left: 66.6666666667%; } + +.col-sm-10, +.row.cols-sm-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + +.col-sm-offset-9 { + margin-left: 75%; } + +.col-sm-11, +.row.cols-sm-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + +.col-sm-offset-10 { + margin-left: 83.3333333333%; } + +.col-sm-12, +.row.cols-sm-12 > * { + max-width: 100%; + flex-basis: 100%; } + +.col-sm-offset-11 { + margin-left: 91.6666666667%; } + +.col-sm-normal { + order: initial; } + +.col-sm-first { + order: -999; } + +.col-sm-last { + order: 999; } + +@media screen and (min-width: 500px) { + .col-md, + [class^='col-md-'], + [class^='col-md-offset-'], + .row[class*='cols-md-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-md, + .row.cols-md > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-md-1, + .row.cols-md-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-md-offset-0 { + margin-left: 0; } + + .col-md-2, + .row.cols-md-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-md-offset-1 { + margin-left: 8.3333333333%; } + + .col-md-3, + .row.cols-md-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-md-offset-2 { + margin-left: 16.6666666667%; } + + .col-md-4, + .row.cols-md-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-md-offset-3 { + margin-left: 25%; } + + .col-md-5, + .row.cols-md-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-md-offset-4 { + margin-left: 33.3333333333%; } + + .col-md-6, + .row.cols-md-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-md-offset-5 { + margin-left: 41.6666666667%; } + + .col-md-7, + .row.cols-md-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-md-offset-6 { + margin-left: 50%; } + + .col-md-8, + .row.cols-md-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-md-offset-7 { + margin-left: 58.3333333333%; } + + .col-md-9, + .row.cols-md-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-md-offset-8 { + margin-left: 66.6666666667%; } + + .col-md-10, + .row.cols-md-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-md-offset-9 { + margin-left: 75%; } + + .col-md-11, + .row.cols-md-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-md-offset-10 { + margin-left: 83.3333333333%; } + + .col-md-12, + .row.cols-md-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-md-offset-11 { + margin-left: 91.6666666667%; } + + .col-md-normal { + order: initial; } + + .col-md-first { + order: -999; } + + .col-md-last { + order: 999; } } +@media screen and (min-width: 1280px) { + .col-lg, + [class^='col-lg-'], + [class^='col-lg-offset-'], + .row[class*='cols-lg-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-lg, + .row.cols-lg > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-lg-1, + .row.cols-lg-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-lg-offset-0 { + margin-left: 0; } + + .col-lg-2, + .row.cols-lg-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-lg-offset-1 { + margin-left: 8.3333333333%; } + + .col-lg-3, + .row.cols-lg-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-lg-offset-2 { + margin-left: 16.6666666667%; } + + .col-lg-4, + .row.cols-lg-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-lg-offset-3 { + margin-left: 25%; } + + .col-lg-5, + .row.cols-lg-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-lg-offset-4 { + margin-left: 33.3333333333%; } + + .col-lg-6, + .row.cols-lg-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-lg-offset-5 { + margin-left: 41.6666666667%; } + + .col-lg-7, + .row.cols-lg-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-lg-offset-6 { + margin-left: 50%; } + + .col-lg-8, + .row.cols-lg-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-lg-offset-7 { + margin-left: 58.3333333333%; } + + .col-lg-9, + .row.cols-lg-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-lg-offset-8 { + margin-left: 66.6666666667%; } + + .col-lg-10, + .row.cols-lg-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-lg-offset-9 { + margin-left: 75%; } + + .col-lg-11, + .row.cols-lg-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-lg-offset-10 { + margin-left: 83.3333333333%; } + + .col-lg-12, + .row.cols-lg-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-lg-offset-11 { + margin-left: 91.6666666667%; } + + .col-lg-normal { + order: initial; } + + .col-lg-first { + order: -999; } + + .col-lg-last { + order: 999; } } +/* Card component CSS variable definitions */ +:root { + --card-back-color: #3cb4e6; + --card-fore-color: #03234b; + --card-border-color: #03234b; } + +.card { + display: flex; + flex-direction: column; + justify-content: space-between; + align-self: center; + position: relative; + width: 100%; + background: var(--card-back-color); + color: var(--card-fore-color); + border: 0.0714285714rem solid var(--card-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + overflow: hidden; } + @media screen and (min-width: 320px) { + .card { + max-width: 320px; } } + .card > .sectione { + background: var(--card-back-color); + color: var(--card-fore-color); + box-sizing: border-box; + margin: 0; + border: 0; + border-radius: 0; + border-bottom: 0.0714285714rem solid var(--card-border-color); + padding: var(--universal-padding); + width: 100%; } + .card > .sectione.media { + height: 200px; + padding: 0; + -o-object-fit: cover; + object-fit: cover; } + .card > .sectione:last-child { + border-bottom: 0; } + +/* + Custom elements for card elements. +*/ +@media screen and (min-width: 240px) { + .card.small { + max-width: 240px; } } +@media screen and (min-width: 480px) { + .card.large { + max-width: 480px; } } +.card.fluid { + max-width: 100%; + width: auto; } + +.card.warning { + --card-back-color: #e5b8b7; + --card-fore-color: #3b234b; + --card-border-color: #8c0078; } + +.card.error { + --card-back-color: #464650; + --card-fore-color: #ffffff; + --card-border-color: #8c0078; } + +.card > .sectione.dark { + --card-back-color: #3b234b; + --card-fore-color: #ffffff; } + +.card > .sectione.double-padded { + padding: calc(1.5 * var(--universal-padding)); } + +/* + Definitions for forms and input elements. +*/ +/* Input_control module CSS variable definitions */ +:root { + --form-back-color: #ffe97f; + --form-fore-color: #03234b; + --form-border-color: #3cb4e6; + --input-back-color: #ffffff; + --input-fore-color: #03234b; + --input-border-color: #3cb4e6; + --input-focus-color: #0288d1; + --input-invalid-color: #d32f2f; + --button-back-color: #e2e2e2; + --button-hover-back-color: #dcdcdc; + --button-fore-color: #212121; + --button-border-color: transparent; + --button-hover-border-color: transparent; + --button-group-border-color: rgba(124, 124, 124, 0.54); } + +form { + background: var(--form-back-color); + color: var(--form-fore-color); + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); } + +fieldset { + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 4); + padding: var(--universal-padding); } + +legend { + box-sizing: border-box; + display: table; + max-width: 100%; + white-space: normal; + font-weight: 500; + padding: calc(var(--universal-padding) / 2); } + +label { + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +.input-group { + display: inline-block; } + .input-group.fluid { + display: flex; + align-items: center; + justify-content: center; } + .input-group.fluid > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + @media screen and (max-width: 499px) { + .input-group.fluid { + align-items: stretch; + flex-direction: column; } } + .input-group.vertical { + display: flex; + align-items: stretch; + flex-direction: column; } + .input-group.vertical > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + +[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { + height: auto; } + +[type="search"] { + -webkit-appearance: textfield; + outline-offset: -2px; } + +[type="search"]::-webkit-search-cancel-button, +[type="search"]::-webkit-search-decoration { + -webkit-appearance: none; } + +input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], +[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { + box-sizing: border-box; + background: var(--input-back-color); + color: var(--input-fore-color); + border: 0.0714285714rem solid var(--input-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 2); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + +input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { + border-color: var(--input-focus-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { + border-color: var(--input-invalid-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { + background: var(--secondary-back-color); } + +select { + max-width: 100%; } + +option { + overflow: hidden; + text-overflow: ellipsis; } + +[type="checkbox"], [type="radio"] { + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + position: relative; + height: calc(1rem + var(--universal-padding) / 2); + width: calc(1rem + var(--universal-padding) / 2); + vertical-align: text-bottom; + padding: 0; + flex-basis: calc(1rem + var(--universal-padding) / 2) !important; + flex-grow: 0 !important; } + [type="checkbox"]:checked:before, [type="radio"]:checked:before { + position: absolute; } + +[type="checkbox"]:checked:before { + content: '\2713'; + font-family: sans-serif; + font-size: calc(1rem + var(--universal-padding) / 2); + top: calc(0rem - var(--universal-padding)); + left: calc(var(--universal-padding) / 4); } + +[type="radio"] { + border-radius: 100%; } + [type="radio"]:checked:before { + border-radius: 100%; + content: ''; + top: calc(0.0714285714rem + var(--universal-padding) / 2); + left: calc(0.0714285714rem + var(--universal-padding) / 2); + background: var(--input-fore-color); + width: 0.5rem; + height: 0.5rem; } + +:placeholder-shown { + color: var(--input-fore-color); } + +::-ms-placeholder { + color: var(--input-fore-color); + opacity: 0.54; } + +button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { + border-style: none; + padding: 0; } + +button, html [type="button"], [type="reset"], [type="submit"] { + -webkit-appearance: button; } + +button { + overflow: visible; + text-transform: none; } + +button, [type="button"], [type="submit"], [type="reset"], +a.button, label.button, .button, +a[role="button"], label[role="button"], [role="button"] { + display: inline-block; + background: var(--button-back-color); + color: var(--button-fore-color); + border: 0.0714285714rem solid var(--button-border-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + text-decoration: none; + cursor: pointer; + transition: background 0.3s; } + button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, + a.button:hover, + a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, + a[role="button"]:hover, + a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { + background: var(--button-hover-back-color); + border-color: var(--button-hover-border-color); } + +input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { + cursor: not-allowed; + opacity: 0.75; } + +.button-group { + display: flex; + border: 0.0714285714rem solid var(--button-group-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { + margin: 0; + max-width: 100%; + flex: 1 1 auto; + text-align: center; + border: 0; + border-radius: 0; + box-shadow: none; } + .button-group > :not(:first-child) { + border-left: 0.0714285714rem solid var(--button-group-border-color); } + @media screen and (max-width: 499px) { + .button-group { + flex-direction: column; } + .button-group > :not(:first-child) { + border: 0; + border-top: 0.0714285714rem solid var(--button-group-border-color); } } + +/* + Custom elements for forms and input elements. +*/ +button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { + --button-back-color: #1976d2; + --button-fore-color: #f8f8f8; } + button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { + --button-hover-back-color: #1565c0; } + +button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { + --button-back-color: #d32f2f; + --button-fore-color: #f8f8f8; } + button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { + --button-hover-back-color: #c62828; } + +button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { + --button-back-color: #308732; + --button-fore-color: #f8f8f8; } + button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { + --button-hover-back-color: #277529; } + +button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { + --button-back-color: #212121; + --button-fore-color: #f8f8f8; } + button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { + --button-hover-back-color: #111; } + +button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { + padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); + margin: var(--universal-margin); } + +button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { + padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); + margin: var(--universal-margin); } + +/* + Definitions for navigation elements. +*/ +/* Navigation module CSS variable definitions */ +:root { + --header-back-color: #03234b; + --header-hover-back-color: #ffd200; + --header-fore-color: #ffffff; + --header-border-color: #3cb4e6; + --nav-back-color: #ffffff; + --nav-hover-back-color: #ffe97f; + --nav-fore-color: #e6007e; + --nav-border-color: #3cb4e6; + --nav-link-color: #3cb4e6; + --footer-fore-color: #ffffff; + --footer-back-color: #03234b; + --footer-border-color: #3cb4e6; + --footer-link-color: #3cb4e6; + --drawer-back-color: #ffffff; + --drawer-hover-back-color: #ffe97f; + --drawer-border-color: #3cb4e6; + --drawer-close-color: #e6007e; } + +header { + height: 2.75rem; + background: var(--header-back-color); + color: var(--header-fore-color); + border-bottom: 0.0714285714rem solid var(--header-border-color); + padding: calc(var(--universal-padding) / 4) 0; + white-space: nowrap; + overflow-x: auto; + overflow-y: hidden; } + header.row { + box-sizing: content-box; } + header .logo { + color: var(--header-fore-color); + font-size: 1.75rem; + padding: var(--universal-padding) calc(2 * var(--universal-padding)); + text-decoration: none; } + header button, header [type="button"], header .button, header [role="button"] { + box-sizing: border-box; + position: relative; + top: calc(0rem - var(--universal-padding) / 4); + height: calc(3.1875rem + var(--universal-padding) / 2); + background: var(--header-back-color); + line-height: calc(3.1875rem - var(--universal-padding) * 1.5); + text-align: center; + color: var(--header-fore-color); + border: 0; + border-radius: 0; + margin: 0; + text-transform: uppercase; } + header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { + background: var(--header-hover-back-color); } + +nav { + background: var(--nav-back-color); + color: var(--nav-fore-color); + border: 0.0714285714rem solid var(--nav-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + nav * { + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + nav a, nav a:visited { + display: block; + color: var(--nav-link-color); + border-radius: var(--universal-border-radius); + transition: background 0.3s; } + nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { + text-decoration: none; + background: var(--nav-hover-back-color); } + nav .sublink-1 { + position: relative; + margin-left: calc(2 * var(--universal-padding)); } + nav .sublink-1:before { + position: absolute; + left: calc(var(--universal-padding) - 1 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + nav .sublink-2 { + position: relative; + margin-left: calc(4 * var(--universal-padding)); } + nav .sublink-2:before { + position: absolute; + left: calc(var(--universal-padding) - 3 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + +footer { + background: var(--footer-back-color); + color: var(--footer-fore-color); + border-top: 0.0714285714rem solid var(--footer-border-color); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); + font-size: 0.875rem; } + footer a, footer a:visited { + color: var(--footer-link-color); } + +header.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + top: 0; } + +footer.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + bottom: 0; } + +.drawer-toggle:before { + display: inline-block; + position: relative; + vertical-align: bottom; + content: '\00a0\2261\00a0'; + font-family: sans-serif; + font-size: 1.5em; } +@media screen and (min-width: 500px) { + .drawer-toggle:not(.persistent) { + display: none; } } + +[type="checkbox"].drawer { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].drawer + * { + display: block; + box-sizing: border-box; + position: fixed; + top: 0; + width: 320px; + height: 100vh; + overflow-y: auto; + background: var(--drawer-back-color); + border: 0.0714285714rem solid var(--drawer-border-color); + border-radius: 0; + margin: 0; + z-index: 1110; + right: -320px; + transition: right 0.3s; } + [type="checkbox"].drawer + * .drawer-close { + position: absolute; + top: var(--universal-margin); + right: var(--universal-margin); + z-index: 1111; + width: 2rem; + height: 2rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].drawer + * .drawer-close:before { + display: block; + content: '\00D7'; + color: var(--drawer-close-color); + position: relative; + font-family: sans-serif; + font-size: 2rem; + line-height: 1; + text-align: center; } + [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { + background: var(--drawer-hover-back-color); } + @media screen and (max-width: 320px) { + [type="checkbox"].drawer + * { + width: 100%; } } + [type="checkbox"].drawer:checked + * { + right: 0; } + @media screen and (min-width: 500px) { + [type="checkbox"].drawer:not(.persistent) + * { + position: static; + height: 100%; + z-index: 1100; } + [type="checkbox"].drawer:not(.persistent) + * .drawer-close { + display: none; } } + +/* + Definitions for the responsive table component. +*/ +/* Table module CSS variable definitions. */ +:root { + --table-border-color: #03234b; + --table-border-separator-color: #03234b; + --table-head-back-color: #03234b; + --table-head-fore-color: #ffffff; + --table-body-back-color: #ffffff; + --table-body-fore-color: #03234b; + --table-body-alt-back-color: #f4f4f4; } + +table { + border-collapse: separate; + border-spacing: 0; + margin: 0; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + padding: var(--universal-padding); + padding-top: 0; } + table caption { + font-size: 1rem; + margin: calc(2 * var(--universal-margin)) 0; + max-width: 100%; + flex: 0 0 100%; } + table thead, table tbody { + display: flex; + flex-flow: row wrap; + border: 0.0714285714rem solid var(--table-border-color); } + table thead { + z-index: 999; + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; + border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } + table tbody { + border-top: 0; + margin-top: calc(0 - var(--universal-margin)); + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + table tr { + display: flex; + padding: 0; } + table th, table td { + padding: calc(0.5 * var(--universal-padding)); + font-size: 0.9rem; } + table th { + text-align: left; + background: var(--table-head-back-color); + color: var(--table-head-fore-color); } + table td { + background: var(--table-body-back-color); + color: var(--table-body-fore-color); + border-top: 0.0714285714rem solid var(--table-border-color); } + +table:not(.horizontal) { + overflow: auto; + max-height: 100%; } + table:not(.horizontal) thead, table:not(.horizontal) tbody { + max-width: 100%; + flex: 0 0 100%; } + table:not(.horizontal) tr { + flex-flow: row wrap; + flex: 0 0 100%; } + table:not(.horizontal) th, table:not(.horizontal) td { + flex: 1 0 0%; + overflow: hidden; + text-overflow: ellipsis; } + table:not(.horizontal) thead { + position: sticky; + top: 0; } + table:not(.horizontal) tbody tr:first-child td { + border-top: 0; } + +table.horizontal { + border: 0; } + table.horizontal thead, table.horizontal tbody { + border: 0; + flex: .2 0 0; + flex-flow: row nowrap; } + table.horizontal tbody { + overflow: auto; + justify-content: space-between; + flex: .8 0 0; + margin-left: 0; + padding-bottom: calc(var(--universal-padding) / 4); } + table.horizontal tr { + flex-direction: column; + flex: 1 0 auto; } + table.horizontal th, table.horizontal td { + width: auto; + border: 0; + border-bottom: 0.0714285714rem solid var(--table-border-color); } + table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { + border-top: 0; } + table.horizontal th { + text-align: right; + border-left: 0.0714285714rem solid var(--table-border-color); + border-right: 0.0714285714rem solid var(--table-border-separator-color); } + table.horizontal thead tr:first-child { + padding-left: 0; } + table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td { + border-right: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td:first-child { + border-top-right-radius: 0.25rem; } + table.horizontal tbody tr:last-child td:last-child { + border-bottom-right-radius: 0.25rem; } + table.horizontal thead tr:first-child th:first-child { + border-top-left-radius: 0.25rem; } + table.horizontal thead tr:first-child th:last-child { + border-bottom-left-radius: 0.25rem; } + +@media screen and (max-width: 499px) { + table, table.horizontal { + border-collapse: collapse; + border: 0; + width: 100%; + display: table; } + table thead, table th, table.horizontal thead, table.horizontal th { + border: 0; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + padding: 0; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + table tbody, table.horizontal tbody { + border: 0; + display: table-row-group; } + table tr, table.horizontal tr { + display: block; + border: 0.0714285714rem solid var(--table-border-color); + border-radius: var(--universal-border-radius); + background: #ffffff; + padding: var(--universal-padding); + margin: var(--universal-margin); + margin-bottom: calc(1 * var(--universal-margin)); } + table th, table td, table.horizontal th, table.horizontal td { + width: auto; } + table td, table.horizontal td { + display: block; + border: 0; + text-align: right; } + table td:before, table.horizontal td:before { + content: attr(data-label); + float: left; + font-weight: 600; } + table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0; } + table tbody tr:last-child td, table.horizontal tbody tr:last-child td { + border-right: 0; } } +table tr:nth-of-type(2n) > td { + background: var(--table-body-alt-back-color); } + +@media screen and (max-width: 500px) { + table tr:nth-of-type(2n) { + background: var(--table-body-alt-back-color); } } +:root { + --table-body-hover-back-color: #90caf9; } + +table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } + +@media screen and (max-width: 500px) { + table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } } +/* + Definitions for contextual background elements, toasts and tooltips. +*/ +/* Contextual module CSS variable definitions */ +:root { + --mark-back-color: #3cb4e6; + --mark-fore-color: #ffffff; } + +mark { + background: var(--mark-back-color); + color: var(--mark-fore-color); + font-size: 0.95em; + line-height: 1em; + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) var(--universal-padding); } + mark.inline-block { + display: inline-block; + font-size: 1em; + line-height: 1.4; + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +:root { + --toast-back-color: #424242; + --toast-fore-color: #fafafa; } + +.toast { + position: fixed; + bottom: calc(var(--universal-margin) * 3); + left: 50%; + transform: translate(-50%, -50%); + z-index: 1111; + color: var(--toast-fore-color); + background: var(--toast-back-color); + border-radius: calc(var(--universal-border-radius) * 16); + padding: var(--universal-padding) calc(var(--universal-padding) * 3); } + +:root { + --tooltip-back-color: #212121; + --tooltip-fore-color: #fafafa; } + +.tooltip { + position: relative; + display: inline-block; } + .tooltip:before, .tooltip:after { + position: absolute; + opacity: 0; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: all 0.3s; + z-index: 1010; + left: 50%; } + .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { + bottom: 75%; } + .tooltip.bottom:before, .tooltip.bottom:after { + top: 75%; } + .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { + opacity: 1; + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); } + .tooltip:before { + content: ''; + background: transparent; + border: var(--universal-margin) solid transparent; + left: calc(50% - var(--universal-margin)); } + .tooltip:not(.bottom):before { + border-top-color: #212121; } + .tooltip.bottom:before { + border-bottom-color: #212121; } + .tooltip:after { + content: attr(aria-label); + color: var(--tooltip-fore-color); + background: var(--tooltip-back-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + white-space: nowrap; + transform: translateX(-50%); } + .tooltip:not(.bottom):after { + margin-bottom: calc(2 * var(--universal-margin)); } + .tooltip.bottom:after { + margin-top: calc(2 * var(--universal-margin)); } + +:root { + --modal-overlay-color: rgba(0, 0, 0, 0.45); + --modal-close-color: #e6007e; + --modal-close-hover-color: #ffe97f; } + +[type="checkbox"].modal { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].modal + div { + position: fixed; + top: 0; + left: 0; + display: none; + width: 100vw; + height: 100vh; + background: var(--modal-overlay-color); } + [type="checkbox"].modal + div .card { + margin: 0 auto; + max-height: 50vh; + overflow: auto; } + [type="checkbox"].modal + div .card .modal-close { + position: absolute; + top: 0; + right: 0; + width: 1.75rem; + height: 1.75rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].modal + div .card .modal-close:before { + display: block; + content: '\00D7'; + color: var(--modal-close-color); + position: relative; + font-family: sans-serif; + font-size: 1.75rem; + line-height: 1; + text-align: center; } + [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { + background: var(--modal-close-hover-color); } + [type="checkbox"].modal:checked + div { + display: flex; + flex: 0 1 auto; + z-index: 1200; } + [type="checkbox"].modal:checked + div .card .modal-close { + z-index: 1211; } + +:root { + --collapse-label-back-color: #03234b; + --collapse-label-fore-color: #ffffff; + --collapse-label-hover-back-color: #3cb4e6; + --collapse-selected-label-back-color: #3cb4e6; + --collapse-border-color: var(--collapse-label-back-color); + --collapse-selected-border-color: #ceecf8; + --collapse-content-back-color: #ffffff; + --collapse-selected-label-border-color: #3cb4e6; } + +.collapse { + width: calc(100% - 2 * var(--universal-margin)); + opacity: 1; + display: flex; + flex-direction: column; + margin: var(--universal-margin); + border-radius: var(--universal-border-radius); } + .collapse > [type="radio"], .collapse > [type="checkbox"] { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + .collapse > label { + flex-grow: 1; + display: inline-block; + height: 1.25rem; + cursor: pointer; + transition: background 0.2s; + color: var(--collapse-label-fore-color); + background: var(--collapse-label-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + padding: calc(1.25 * var(--universal-padding)); } + .collapse > label:hover, .collapse > label:focus { + background: var(--collapse-label-hover-back-color); } + .collapse > label + div { + flex-basis: auto; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: max-height 0.3s; + max-height: 1px; } + .collapse > :checked + label { + background: var(--collapse-selected-label-back-color); + border-color: var(--collapse-selected-label-border-color); } + .collapse > :checked + label + div { + box-sizing: border-box; + position: relative; + width: 100%; + height: auto; + overflow: auto; + margin: 0; + background: var(--collapse-content-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + border-top: 0; + padding: var(--universal-padding); + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); + max-height: 100%; } + .collapse > label:not(:first-of-type) { + border-top: 0; } + .collapse > label:first-of-type { + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } + .collapse > label:last-of-type:not(:first-of-type) { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + .collapse > label:last-of-type:first-of-type { + border-radius: var(--universal-border-radius); } + .collapse > :checked:last-of-type:not(:first-of-type) + label { + border-radius: 0; } + .collapse > :checked:last-of-type + label + div { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + +/* + Custom elements for contextual background elements, toasts and tooltips. +*/ +mark.tertiary { + --mark-back-color: #3cb4e6; } + +mark.tag { + padding: calc(var(--universal-padding)/2) var(--universal-padding); + border-radius: 1em; } + +/* + Definitions for progress elements and spinners. +*/ +/* Progress module CSS variable definitions */ +:root { + --progress-back-color: #3cb4e6; + --progress-fore-color: #555; } + +progress { + display: block; + vertical-align: baseline; + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + height: 0.75rem; + width: calc(100% - 2 * var(--universal-margin)); + margin: var(--universal-margin); + border: 0; + border-radius: calc(2 * var(--universal-border-radius)); + background: var(--progress-back-color); + color: var(--progress-fore-color); } + progress::-webkit-progress-value { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress::-webkit-progress-bar { + background: var(--progress-back-color); } + progress::-moz-progress-bar { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-webkit-progress-value { + border-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-moz-progress-bar { + border-radius: calc(2 * var(--universal-border-radius)); } + progress.inline { + display: inline-block; + vertical-align: middle; + width: 60%; } + +:root { + --spinner-back-color: #ddd; + --spinner-fore-color: #555; } + +@keyframes spinner-donut-anim { + 0% { + transform: rotate(0deg); } + 100% { + transform: rotate(360deg); } } +.spinner { + display: inline-block; + margin: var(--universal-margin); + border: 0.25rem solid var(--spinner-back-color); + border-left: 0.25rem solid var(--spinner-fore-color); + border-radius: 50%; + width: 1.25rem; + height: 1.25rem; + animation: spinner-donut-anim 1.2s linear infinite; } + +/* + Custom elements for progress bars and spinners. +*/ +progress.primary { + --progress-fore-color: #1976d2; } + +progress.secondary { + --progress-fore-color: #d32f2f; } + +progress.tertiary { + --progress-fore-color: #308732; } + +.spinner.primary { + --spinner-fore-color: #1976d2; } + +.spinner.secondary { + --spinner-fore-color: #d32f2f; } + +.spinner.tertiary { + --spinner-fore-color: #308732; } + +/* + Definitions for icons - powered by Feather (https://feathericons.com/). +*/ +span[class^='icon-'] { + display: inline-block; + height: 1em; + width: 1em; + vertical-align: -0.125em; + background-size: contain; + margin: 0 calc(var(--universal-margin) / 4); } + span[class^='icon-'].secondary { + -webkit-filter: invert(25%); + filter: invert(25%); } + span[class^='icon-'].inverse { + -webkit-filter: invert(100%); + filter: invert(100%); } + +span.icon-alert { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-bookmark { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-calendar { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-credit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-edit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } +span.icon-link { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-help { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-home { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-info { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-lock { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-mail { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-location { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-phone { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-rss { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-search { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-settings { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-share { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-cart { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-upload { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-user { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } + +/* + Definitions for STMicroelectronics icons (https://brandportal.st.com/document/26). +*/ +span.icon-st-update { + background-image: url("Update.svg"); } +span.icon-st-add { + background-image: url("Add button.svg"); } + +/* + Definitions for utilities and helper classes. +*/ +/* Utility module CSS variable definitions */ +:root { + --generic-border-color: rgba(0, 0, 0, 0.3); + --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } + +.hidden { + display: none !important; } + +.visually-hidden { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } + +.bordered { + border: 0.0714285714rem solid var(--generic-border-color) !important; } + +.rounded { + border-radius: var(--universal-border-radius) !important; } + +.circular { + border-radius: 50% !important; } + +.shadowed { + box-shadow: var(--generic-box-shadow) !important; } + +.responsive-margin { + margin: calc(var(--universal-margin) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-margin { + margin: calc(var(--universal-margin) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-margin { + margin: var(--universal-margin) !important; } } + +.responsive-padding { + padding: calc(var(--universal-padding) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-padding { + padding: calc(var(--universal-padding) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-padding { + padding: var(--universal-padding) !important; } } + +@media screen and (max-width: 499px) { + .hidden-sm { + display: none !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .hidden-md { + display: none !important; } } +@media screen and (min-width: 1280px) { + .hidden-lg { + display: none !important; } } +@media screen and (max-width: 499px) { + .visually-hidden-sm { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .visually-hidden-md { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 1280px) { + .visually-hidden-lg { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } + +/*# sourceMappingURL=mini-custom.css.map */ + +img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } +img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} + +.figure { + display: block; + margin-left: auto; + margin-right: auto; + text-align: center; +} \ No newline at end of file diff --git a/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/st_logo_2020.png b/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/st_logo_2020.png new file mode 100644 index 0000000000..d6cebb5ac7 Binary files /dev/null and b/system/Drivers/STM32WL3x_HAL_Driver/_htmresc/st_logo_2020.png differ diff --git a/system/Drivers/STM32YYxx_HAL_Driver_version.md b/system/Drivers/STM32YYxx_HAL_Driver_version.md index ff023be762..7324c2b198 100644 --- a/system/Drivers/STM32YYxx_HAL_Driver_version.md +++ b/system/Drivers/STM32YYxx_HAL_Driver_version.md @@ -23,6 +23,7 @@ * STM32WB0: 1.3.0 * STM32WBA: 1.7.0 * STM32WL: 1.3.1 + * STM32WL3: 1.2.0 Release notes of each STM32YYxx HAL Drivers available here: diff --git a/system/STM32WL3x/stm32wl3x_hal_conf.h b/system/STM32WL3x/stm32wl3x_hal_conf.h new file mode 100644 index 0000000000..b496646f38 --- /dev/null +++ b/system/STM32WL3x/stm32wl3x_hal_conf.h @@ -0,0 +1,16 @@ +#ifndef __STM32WL3x_HAL_CONF_H +#define __STM32WL3x_HAL_CONF_H + +#include "variant.h" + +/* STM32WL3x specific HAL configuration options. */ +#if __has_include("hal_conf_custom.h") +#include "hal_conf_custom.h" +#else +#if __has_include("hal_conf_extra.h") +#include "hal_conf_extra.h" +#endif +#include "stm32wl3x_hal_conf_default.h" +#endif + +#endif /* __STM32WL3x_HAL_CONF_H */ \ No newline at end of file diff --git a/system/STM32WL3x/stm32wl3x_hal_conf_default.h b/system/STM32WL3x/stm32wl3x_hal_conf_default.h new file mode 100644 index 0000000000..52c2cb79fe --- /dev/null +++ b/system/STM32WL3x/stm32wl3x_hal_conf_default.h @@ -0,0 +1,316 @@ +/** + ****************************************************************************** + * @file stm32wl3x_hal_conf_default.h + * @brief HAL default configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32WL3X_HAL_CONF_H +#define STM32WL3X_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief Include the default list of modules to be used in the HAL driver + * and manage module deactivation + */ +#include "stm32yyxx_hal_conf.h" +#if 0 +/** + * @brief This is the list of modules to be used in the HAL driver + */ + +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_COMP_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_LCD_MODULE_ENABLED +#define HAL_LCSC_MODULE_ENABLED +#define HAL_LPAWUR_MODULE_ENABLED +#define HAL_MRSUBG_MODULE_ENABLED +#define HAL_MRSUBG_TIMER_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SMBUS_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#endif + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_DAC_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_IWDG_REGISTER_CALLBACKS 0u +#define USE_HAL_LCD_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ + +#if !defined (HSE_VALUE) +#define HSE_VALUE (48000000UL) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations +in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @brief 64 MHz PLL clock default value. + * This value is the default RC64M_PLL value after Reset. + */ +#if !defined (RC64MPLL_VALUE) +#define RC64MPLL_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* RC64MPLL_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/* ################ HSE Capacitor tuning configuration ###################### */ +/** + * @brief Default value of the HSE capacitor tuning. + */ +#if !defined(CFG_HW_RCC_HSE_CAPACITOR_TUNE) +#define CFG_HW_RCC_HSE_CAPACITOR_TUNE 32 +#endif + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#if !defined (VDD_VALUE) +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#endif /* VDD_VALUE */ +#if !defined (TICK_INT_PRIORITY) +#define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority (lowest by default) */ +#endif /* TICK_INT_PRIORITY */ +#if !defined (USE_RTOS) +#define USE_RTOS 0U +#endif +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ +#if !defined (USE_SPI_CRC) +#define USE_SPI_CRC 1U +#endif /* USE_SPI_CRC */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32wl3x_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32wl3x_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED +#include "stm32wl3x_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32wl3x_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32wl3x_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32wl3x_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED +#include "stm32wl3x_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32wl3x_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32wl3x_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32wl3x_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32wl3x_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32wl3x_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32wl3x_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED +#include "stm32wl3x_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32wl3x_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32wl3x_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32wl3x_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32wl3x_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32wl3x_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32wl3x_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32wl3x_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32wl3x_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32wl3x_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32wl3x_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_MRSUBG_MODULE_ENABLED +#include "stm32wl3x_hal_mrsubg.h" +#endif /* HAL_MRSUBG_MODULE_ENABLED */ + +#ifdef HAL_MRSUBG_TIMER_MODULE_ENABLED +#include "stm32wl3x_hal_mrsubg_timer.h" +#endif /* HAL_MRSUBG_TIMER_MODULE_ENABLED */ + +#ifdef HAL_LPAWUR_MODULE_ENABLED +#include "stm32wl3x_hal_lpawur.h" +#endif /* HAL_LPAWUR_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32WL3X_HAL_CONF_H */ diff --git a/system/STM32WL3x/system_stm32wl3x.c b/system/STM32WL3x/system_stm32wl3x.c new file mode 100644 index 0000000000..4f48cbf259 --- /dev/null +++ b/system/STM32WL3x/system_stm32wl3x.c @@ -0,0 +1,339 @@ +/** + ****************************************************************************** + * @file system_stm32wl3x.c + * @author MCD Application Team + * @brief CMSIS Cortex Device Peripheral Access Layer System Source File + * + ****************************************************************************** + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32wl3x.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * After each device reset the HSI (64 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32wl3x.s" file, to + * configure the system clock before to branch to main program. + * + * This file configures the system clock as follows: + *============================================================================= + *----------------------------------------------------------------------------- + * System Clock source | HSI + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 16000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 16000000 + *----------------------------------------------------------------------------- + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup STM32WL3x_system + * @{ + */ + +/** @addtogroup STM32WL3x_System_Private_Includes + * @{ + */ + +#include "stm32wl3x.h" + +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_Defines + * @{ + */ + +/* Note: Following vector table addresses must be defined in line with linker + configuration. */ +/*!< Uncomment the following line and change the address + if you need to relocate your vector Table at a custom base address (+ VECT_TAB_OFFSET) */ +/* #define VECT_TAB_BASE_ADDRESS 0x08000000 */ + +#if !defined(VECT_TAB_OFFSET) +#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. + This value must be a multiple of 0x100. */ +#endif /* VECT_TAB_OFFSET */ +#if !defined(VECT_TAB_BASE_ADDRESS) +/*!< Uncomment the following line if you need to relocate your vector Table + in SRAM else user remap will be done in FLASH. */ +/* #define VECT_TAB_SRAM */ +#if defined(VECT_TAB_SRAM) +#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x100. */ +#else +#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field. + This value must be a multiple of 0x100. */ +#endif /* VECT_TAB_SRAM */ +#endif /* VECT_TAB_BASE_ADDRESS */ +/******************************************************************************/ + +/*!< HW TRIMMING Defines */ +#define VALIDITY_TAG 0xFCBCECCC /*!< TAG to validate the content of the + trimming area content. */ +#define VALIDITY_LOCATION 0x10001EF8 /*!< ROM address of the the validity trimming values content. */ + +/*!< SMPS Configuration Defines */ +#if !defined(CFG_HW_SMPS) +#define CFG_HW_SMPS SMPS_ON +#endif + +#if !defined(CFG_HW_SMPS_BOM) +#define CFG_HW_SMPS_BOM SMPS_BOM3 /*!< SMPS Inductor 10uH */ +#endif + +#if !defined(CFG_HW_SMPS_LOW_POWER) +#define CFG_HW_SMPS_LOW_POWER SMPS_LOW_POWER_OPEN +#endif + +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_Variables + * @{ + */ + /* The SystemCoreClock variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 16000000U; /* The HSI (64MHz) is used as system clock source after startup from reset, configured at 16 MHz. */ + + /* Crystal frequency */ + uint32_t HSE_xtalFrequency = HSE_VALUE; + + /* The RAM_VR variable is a mirroring in RAM of some registers information. + It is a sort of virtual register in RAM. + */ +#if defined ( __ICCARM__ ) + #pragma location=".ram_vr" + __root __no_init RAM_VR_TypeDef RAM_VR; +#else +#if defined ( __ARMCC_VERSION ) + __attribute__((section(".bss" ".ram_vr"))) +#elif defined ( __GNUC__ ) + __attribute__((section(".ram_vr"))) +#endif + RAM_VR_TypeDef RAM_VR __attribute__((used)); +#endif +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_FunctionPrototypes + * @{ + */ + +void CPUcontextRestore(void); + +/** + * @} + */ + +/** @addtogroup STM32WL3x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * @param None + * @retval None + */ + +void SystemInit(void) +{ + uint32_t mainRegulator, smpsOutVoltage, lsiBw, hsiCalib; + uint8_t i; + + /* If the reset reason is a wakeup from power save restore the context */ + if ((RCC->CSR == 0) && ((PWR->IWUF != 0) || (PWR->WUFA != 0) || (PWR->WUFB != 0))) + { + RAM_VR.WakeupFromSleepFlag = 1; /* A wakeup from power save occurred */ + CPUcontextRestore(); /* Restore the context */ + /* if the context restore worked properly, we should never return here */ + while(1) { + NVIC_SystemReset(); + } + } + + /* Configure the Vector Table location */ + SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation */ + + /* Store in RAM the AppBase information */ + RAM_VR.AppBase = (uint32_t) SCB->VTOR; + + /* Enable all the RAM banks in retention during power save */ + SET_BIT(PWR->CR2, PWR_CR2_RAMRET1); + + /* Disable the GPIO retention in power save configuration */ + CLEAR_BIT(PWR->CR2, PWR_CR2_GPIORET); + + /* SMPS setup */ + if ((CFG_HW_SMPS == SMPS_ON) || (CFG_HW_SMPS == SMPS_STATIC_BOF) || (CFG_HW_SMPS == SMPS_DYNAMIC_BOF)) + { + while(READ_BIT(PWR->SR2, PWR_SR2_SMPSRDY) != PWR_SR2_SMPSRDY); // Wait until SMPS is ready + MODIFY_REG(PWR->CR5, PWR_CR5_SMPSBOMSEL, (CFG_HW_SMPS_BOM<CR5, PWR_CR5_NOSMPS, (CFG_HW_SMPS<CR5, PWR_CR5_NOSMPS_BOF); + CLEAR_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_DYN); + SET_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_STATIC); + } + if (CFG_HW_SMPS == SMPS_DYNAMIC_BOF) + { + /* The SMPS output voltage level and SMPS BOF tuning are set to 1.4V by default */ + SET_BIT(PWR->CR5, PWR_CR5_NOSMPS_BOF); + CLEAR_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_STATIC); + SET_BIT(PWR->CR5, PWR_CR5_SMPS_BOF_DYN); + } + MODIFY_REG(PWR->CR5, PWR_CR5_SMPSLPOPEN, (CFG_HW_SMPS_LOW_POWER<CSSWCR, RCC_CSSWCR_HSITRIMSW, hsiCalib << RCC_CSSWCR_HSITRIMSW_Pos); + SET_BIT(RCC->CSSWCR, RCC_CSSWCR_HSISWTRIMEN); + + /* Low speed internal RC trimming value set by software */ + MODIFY_REG(RCC->CSSWCR, RCC_CSSWCR_LSISWBW, lsiBw << RCC_CSSWCR_LSISWBW_Pos); + SET_BIT(RCC->CSSWCR, RCC_CSSWCR_LSISWTRIMEN); + + /* Set Main Regulator voltage Trimming value */ + MODIFY_REG(PWR->ENGTRIM, PWR_ENGTRIM_TRIM_MR, ((mainRegulator << PWR_ENGTRIM_TRIM_MR_Pos) & PWR_ENGTRIM_TRIM_MR)); + SET_BIT(PWR->ENGTRIM, PWR_ENGTRIM_TRIMMREN); + + /* Set SMPS output voltage Trimming value */ + MODIFY_REG(PWR->ENGTRIM, PWR_ENGTRIM_SMPS_TRIM, ((smpsOutVoltage << PWR_ENGTRIM_SMPS_TRIM_Pos) & PWR_ENGTRIM_SMPS_TRIM)); + SET_BIT(PWR->ENGTRIM, PWR_ENGTRIM_SMPSTRIMEN); + } + + /* Set all the interrupt with low priprity */ + for (i=0; i<32; i++) + { + NVIC_SetPriority((IRQn_Type)i, IRQ_LOW_PRIORITY); + } + + /* Enable all the irqs */ + __enable_irq(); +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint8_t directHSE_enabled; + uint8_t divPrescaler; + + /* Get SYSCLK source HSE or HSI+PLL64MHz */ + directHSE_enabled = (RCC->CFGR & RCC_CFGR_HSESEL) >> RCC_CFGR_HSESEL_Pos; + + /* Get the clock divider */ + divPrescaler = (RCC->CFGR & RCC_CFGR_CLKSYSDIV_STATUS) >> RCC_CFGR_CLKSYSDIV_STATUS_Pos; + + if (directHSE_enabled) + { + switch(divPrescaler) + { + case 0: + SystemCoreClock = HSE_VALUE; + break; + case 1: + SystemCoreClock = HSE_VALUE/2; + break; + default: + SystemCoreClock = HSE_VALUE/(3*(1<<(divPrescaler-2))); + break; + } + } + else + { + SystemCoreClock = HSI_VALUE >> divPrescaler; + } +} + +/** + * @brief Restores the saved CPU state before to enter in power save + * by popping it from the stack + * @param None + * @retval None + */ +__WEAK void CPUcontextRestore(void) +{ +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/variants/STM32F1xx/F103C8T_F103CB(T-U)/CMakeLists.txt b/variants/STM32F1xx/F103C8T_F103CB(T-U)/CMakeLists.txt index f026bfbfae..ef6ad86310 100644 --- a/variants/STM32F1xx/F103C8T_F103CB(T-U)/CMakeLists.txt +++ b/variants/STM32F1xx/F103C8T_F103CB(T-U)/CMakeLists.txt @@ -24,6 +24,7 @@ add_library(variant_bin STATIC EXCLUDE_FROM_ALL PeripheralPins_MALYANM200_F103CB.c startup_M200_f103xb.S variant_AFROFLIGHT_F103CB.cpp + variant_DATABOARD.cpp variant_generic.cpp variant_MALYANM200_F103CB.cpp variant_MAPLEMINI_F103CB.cpp diff --git a/variants/STM32F4xx/F411V(C-E)T/CMakeLists.txt b/variants/STM32F4xx/F411V(C-E)T/CMakeLists.txt index 1aecc9cfb3..9f74f7ff8e 100644 --- a/variants/STM32F4xx/F411V(C-E)T/CMakeLists.txt +++ b/variants/STM32F4xx/F411V(C-E)T/CMakeLists.txt @@ -21,8 +21,8 @@ target_link_libraries(variant INTERFACE variant_usage) add_library(variant_bin STATIC EXCLUDE_FROM_ALL generic_clock.c PeripheralPins.c - variant_generic.cpp variant_DISCO_F411VE.cpp + variant_generic.cpp ) target_link_libraries(variant_bin PUBLIC variant_usage) diff --git a/variants/STM32WL3x/WL30K(8-B)V/CMakeLists.txt b/variants/STM32WL3x/WL30K(8-B)V/CMakeLists.txt new file mode 100644 index 0000000000..2a4d55b6b1 --- /dev/null +++ b/variants/STM32WL3x/WL30K(8-B)V/CMakeLists.txt @@ -0,0 +1,31 @@ +# v3.21 implemented semantic changes regarding $ +# See https://cmake.org/cmake/help/v3.21/command/target_link_libraries.html#linking-object-libraries-via-target-objects +cmake_minimum_required(VERSION 3.21) + +add_library(variant INTERFACE) +add_library(variant_usage INTERFACE) + +target_include_directories(variant_usage INTERFACE + . +) + + +target_link_libraries(variant_usage INTERFACE + base_config +) + +target_link_libraries(variant INTERFACE variant_usage) + + + +add_library(variant_bin STATIC EXCLUDE_FROM_ALL + generic_clock.c + PeripheralPins.c + variant_generic.cpp +) +target_link_libraries(variant_bin PUBLIC variant_usage) + +target_link_libraries(variant INTERFACE + variant_bin +) + diff --git a/variants/STM32WL3x/WL30K(8-B)V/PeripheralPins.c b/variants/STM32WL3x/WL30K(8-B)V/PeripheralPins.c new file mode 100644 index 0000000000..50d2beb742 --- /dev/null +++ b/variants/STM32WL3x/WL30K(8-B)V/PeripheralPins.c @@ -0,0 +1,152 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32WL30K8Vx.xml, STM32WL30KBVx.xml + * CubeMX DB release 6.0.150 + */ +#if !defined(CUSTOM_PERIPHERAL_PINS) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_VINP2 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_VINP1 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** No I2C *** + +//*** No I3C *** + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 2, 0)}, // TIM2_CH2 + {PA_3_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PA_8, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PA_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PB_0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_6, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PB_12, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PB_13, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_0, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_7, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_8, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_9, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/variants/STM32WL3x/WL30K(8-B)V/PinNamesVar.h b/variants/STM32WL3x/WL30K(8-B)V/PinNamesVar.h new file mode 100644 index 0000000000..22b13e983c --- /dev/null +++ b/variants/STM32WL3x/WL30K(8-B)V/PinNamesVar.h @@ -0,0 +1,55 @@ +/* Alternate pin name */ +PA_2_ALT1 = PA_2 | ALT1, +PA_3_ALT1 = PA_3 | ALT1, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PB_0, /* SYS_WKUP0 */ +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = PB_1, /* SYS_WKUP1 */ +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = PB_2, /* SYS_WKUP2 */ +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = NC, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = NC, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = PB_6, /* SYS_WKUP6 */ +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = PB_7, /* SYS_WKUP7 */ +#endif +#ifdef PWR_WAKEUP_PIN9 + SYS_WKUP9 = PA_8, /* SYS_WKUP8 */ +#endif +#ifdef PWR_WAKEUP_PIN10 + SYS_WKUP10 = PA_9, /* SYS_WKUP9 */ +#endif +#ifdef PWR_WAKEUP_PIN11 + SYS_WKUP11 = PA_10, /* SYS_WKUP10 */ +#endif +#ifdef PWR_WAKEUP_PIN12 + SYS_WKUP12 = PA_11, /* SYS_WKUP11 */ +#endif +#ifdef PWR_WAKEUP_PIN13 + SYS_WKUP13 = PA_0, /* SYS_WKUP12 */ +#endif +#ifdef PWR_WAKEUP_PIN14 + SYS_WKUP14 = PA_1, /* SYS_WKUP13 */ +#endif +#ifdef PWR_WAKEUP_PIN15 + SYS_WKUP15 = PA_2, /* SYS_WKUP14 */ +#endif +#ifdef PWR_WAKEUP_PIN16 + SYS_WKUP16 = PA_3, /* SYS_WKUP15 */ +#endif + +/* No USB */ diff --git a/variants/STM32WL3x/WL30K(8-B)V/boards_entry.txt b/variants/STM32WL3x/WL30K(8-B)V/boards_entry.txt new file mode 100644 index 0000000000..7797ba7477 --- /dev/null +++ b/variants/STM32WL3x/WL30K(8-B)V/boards_entry.txt @@ -0,0 +1,23 @@ +# This file help to add generic board entry. +# upload.maximum_size and product_line have to be verified +# and changed if needed. +# See: https://github.com/stm32duino/Arduino_Core_STM32/wiki/Add-a-new-variant-%28board%29 + +# Generic WL30K8Vx +GenWL3.menu.pnum.GENERIC_WL30K8VX=Generic WL30K8Vx +GenWL3.menu.pnum.GENERIC_WL30K8VX.upload.maximum_size=65536 +GenWL3.menu.pnum.GENERIC_WL30K8VX.upload.maximum_data_size=8192 +GenWL3.menu.pnum.GENERIC_WL30K8VX.build.board=GENERIC_WL30K8VX +GenWL3.menu.pnum.GENERIC_WL30K8VX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL30K8VX.build.variant=STM32WL3x/WL30K(8-B)V +GenWL3.menu.pnum.GENERIC_WL30K8VX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL30.svd + +# Generic WL30KBVx +GenWL3.menu.pnum.GENERIC_WL30KBVX=Generic WL30KBVx +GenWL3.menu.pnum.GENERIC_WL30KBVX.upload.maximum_size=131072 +GenWL3.menu.pnum.GENERIC_WL30KBVX.upload.maximum_data_size=16384 +GenWL3.menu.pnum.GENERIC_WL30KBVX.build.board=GENERIC_WL30KBVX +GenWL3.menu.pnum.GENERIC_WL30KBVX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL30KBVX.build.variant=STM32WL3x/WL30K(8-B)V +GenWL3.menu.pnum.GENERIC_WL30KBVX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL30.svd + diff --git a/variants/STM32WL3x/WL30K(8-B)V/generic_clock.c b/variants/STM32WL3x/WL30K(8-B)V/generic_clock.c new file mode 100644 index 0000000000..d0d062ad3a --- /dev/null +++ b/variants/STM32WL3x/WL30K(8-B)V/generic_clock.c @@ -0,0 +1,27 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_WL30K8VX) || defined(ARDUINO_GENERIC_WL30KBVX) +#include "pins_arduino.h" + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + /* SystemClock_Config can be generated by STM32CubeMX */ +#warning "SystemClock_Config() is empty. Default clock at reset is used." +} + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32WL3x/WL30K(8-B)V/variant_generic.cpp b/variants/STM32WL3x/WL30K(8-B)V/variant_generic.cpp new file mode 100644 index 0000000000..930bb553b3 --- /dev/null +++ b/variants/STM32WL3x/WL30K(8-B)V/variant_generic.cpp @@ -0,0 +1,43 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_WL30K8VX) || defined(ARDUINO_GENERIC_WL30KBVX) +#include "pins_arduino.h" + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, // D0 + PA_1, // D1 + PA_2, // D2 + PA_3, // D3/A0 + PA_8, // D4 + PA_9, // D5 + PA_10, // D6 + PA_11, // D7 + PB_0, // D8 + PB_1, // D9/A1 + PB_2, // D10 + PB_6, // D11 + PB_7, // D12 + PB_12, // D13 + PB_13, // D14 + PB_14, // D15 + PB_15 // D16 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 3, // A0, PA3 + 9 // A1, PB1 +}; + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32WL3x/WL30K(8-B)V/variant_generic.h b/variants/STM32WL3x/WL30K(8-B)V/variant_generic.h new file mode 100644 index 0000000000..20f7b975e3 --- /dev/null +++ b/variants/STM32WL3x/WL30K(8-B)V/variant_generic.h @@ -0,0 +1,133 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 0 +#define PA1 1 +#define PA2 2 +#define PA3 PIN_A0 +#define PA8 4 +#define PA9 5 +#define PA10 6 +#define PA11 7 +#define PB0 8 +#define PB1 PIN_A1 +#define PB2 10 +#define PB6 11 +#define PB7 12 +#define PB12 13 +#define PB13 14 +#define PB14 15 +#define PB15 16 + +// Alternate pins number +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) + +#define NUM_DIGITAL_PINS 17 +#define NUM_ANALOG_INPUTS 2 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PNUM_NOT_DEFINED +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PNUM_NOT_DEFINED +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA9 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA11 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA8 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA3 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PNUM_NOT_DEFINED +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PNUM_NOT_DEFINED +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM16 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM2 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA8 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA1 +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32WL3x/WL31C(8-B)V/CMakeLists.txt b/variants/STM32WL3x/WL31C(8-B)V/CMakeLists.txt new file mode 100644 index 0000000000..2a4d55b6b1 --- /dev/null +++ b/variants/STM32WL3x/WL31C(8-B)V/CMakeLists.txt @@ -0,0 +1,31 @@ +# v3.21 implemented semantic changes regarding $ +# See https://cmake.org/cmake/help/v3.21/command/target_link_libraries.html#linking-object-libraries-via-target-objects +cmake_minimum_required(VERSION 3.21) + +add_library(variant INTERFACE) +add_library(variant_usage INTERFACE) + +target_include_directories(variant_usage INTERFACE + . +) + + +target_link_libraries(variant_usage INTERFACE + base_config +) + +target_link_libraries(variant INTERFACE variant_usage) + + + +add_library(variant_bin STATIC EXCLUDE_FROM_ALL + generic_clock.c + PeripheralPins.c + variant_generic.cpp +) +target_link_libraries(variant_bin PUBLIC variant_usage) + +target_link_libraries(variant INTERFACE + variant_bin +) + diff --git a/variants/STM32WL3x/WL31C(8-B)V/PeripheralPins.c b/variants/STM32WL3x/WL31C(8-B)V/PeripheralPins.c new file mode 100644 index 0000000000..1860af5d42 --- /dev/null +++ b/variants/STM32WL3x/WL31C(8-B)V/PeripheralPins.c @@ -0,0 +1,208 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32WL31C8Vx.xml, STM32WL31CBVx.xml + * CubeMX DB release 6.0.150 + */ +#if !defined(CUSTOM_PERIPHERAL_PINS) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_VINP2 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_VINP1 + {PB_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_VINP0 + {PB_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_VINP3 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_1, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {PB_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_0, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {PB_11, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** No I3C *** + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 2, 0)}, // TIM2_CH2 + {PA_3_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PA_4, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 2, 0)}, // TIM2_CH2 + {PA_6, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PA_7, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 2, 0)}, // TIM2_CH2 + {PA_8, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PA_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PA_12, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PB_6, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PB_8, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 2, 0)}, // TIM2_CH2 + {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PB_12, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PB_13, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_4, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_4, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_5, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_8, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_0, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_9, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_7, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_9, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_8, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PA_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_8, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PA_13, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_9, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_0, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_10, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/variants/STM32WL3x/WL31C(8-B)V/PinNamesVar.h b/variants/STM32WL3x/WL31C(8-B)V/PinNamesVar.h new file mode 100644 index 0000000000..48cd6276bc --- /dev/null +++ b/variants/STM32WL3x/WL31C(8-B)V/PinNamesVar.h @@ -0,0 +1,58 @@ +/* Alternate pin name */ +PA_2_ALT1 = PA_2 | ALT1, +PA_3_ALT1 = PA_3 | ALT1, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PB_0, /* SYS_WKUP0 */ +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = PB_1, /* SYS_WKUP1 */ +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = PB_2, /* SYS_WKUP2 */ +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = PB_3, /* SYS_WKUP3 */ +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = PB_4, /* SYS_WKUP4 */ +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = PB_5, /* SYS_WKUP5 */ +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = PB_6, /* SYS_WKUP6 */ +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = PA_7, /* SYS_WKUP7 */ +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8_1 = PB_7, /* SYS_WKUP7 */ +#endif +#ifdef PWR_WAKEUP_PIN9 + SYS_WKUP9 = PA_8, /* SYS_WKUP8 */ +#endif +#ifdef PWR_WAKEUP_PIN10 + SYS_WKUP10 = PA_9, /* SYS_WKUP9 */ +#endif +#ifdef PWR_WAKEUP_PIN11 + SYS_WKUP11 = PA_10, /* SYS_WKUP10 */ +#endif +#ifdef PWR_WAKEUP_PIN12 + SYS_WKUP12 = PA_11, /* SYS_WKUP11 */ +#endif +#ifdef PWR_WAKEUP_PIN13 + SYS_WKUP13 = PA_0, /* SYS_WKUP12 */ +#endif +#ifdef PWR_WAKEUP_PIN14 + SYS_WKUP14 = PA_1, /* SYS_WKUP13 */ +#endif +#ifdef PWR_WAKEUP_PIN15 + SYS_WKUP15 = PA_2, /* SYS_WKUP14 */ +#endif +#ifdef PWR_WAKEUP_PIN16 + SYS_WKUP16 = PA_3, /* SYS_WKUP15 */ +#endif + +/* No USB */ diff --git a/variants/STM32WL3x/WL31C(8-B)V/boards_entry.txt b/variants/STM32WL3x/WL31C(8-B)V/boards_entry.txt new file mode 100644 index 0000000000..79e202ec50 --- /dev/null +++ b/variants/STM32WL3x/WL31C(8-B)V/boards_entry.txt @@ -0,0 +1,23 @@ +# This file help to add generic board entry. +# upload.maximum_size and product_line have to be verified +# and changed if needed. +# See: https://github.com/stm32duino/Arduino_Core_STM32/wiki/Add-a-new-variant-%28board%29 + +# Generic WL31C8Vx +GenWL3.menu.pnum.GENERIC_WL31C8VX=Generic WL31C8Vx +GenWL3.menu.pnum.GENERIC_WL31C8VX.upload.maximum_size=65536 +GenWL3.menu.pnum.GENERIC_WL31C8VX.upload.maximum_data_size=8192 +GenWL3.menu.pnum.GENERIC_WL31C8VX.build.board=GENERIC_WL31C8VX +GenWL3.menu.pnum.GENERIC_WL31C8VX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL31C8VX.build.variant=STM32WL3x/WL31C(8-B)V +GenWL3.menu.pnum.GENERIC_WL31C8VX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL31.svd + +# Generic WL31CBVx +GenWL3.menu.pnum.GENERIC_WL31CBVX=Generic WL31CBVx +GenWL3.menu.pnum.GENERIC_WL31CBVX.upload.maximum_size=131072 +GenWL3.menu.pnum.GENERIC_WL31CBVX.upload.maximum_data_size=16384 +GenWL3.menu.pnum.GENERIC_WL31CBVX.build.board=GENERIC_WL31CBVX +GenWL3.menu.pnum.GENERIC_WL31CBVX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL31CBVX.build.variant=STM32WL3x/WL31C(8-B)V +GenWL3.menu.pnum.GENERIC_WL31CBVX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL31.svd + diff --git a/variants/STM32WL3x/WL31C(8-B)V/generic_clock.c b/variants/STM32WL3x/WL31C(8-B)V/generic_clock.c new file mode 100644 index 0000000000..e3b0be96c3 --- /dev/null +++ b/variants/STM32WL3x/WL31C(8-B)V/generic_clock.c @@ -0,0 +1,27 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_WL31C8VX) || defined(ARDUINO_GENERIC_WL31CBVX) +#include "pins_arduino.h" + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + /* SystemClock_Config can be generated by STM32CubeMX */ +#warning "SystemClock_Config() is empty. Default clock at reset is used." +} + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32WL3x/WL31C(8-B)V/variant_generic.cpp b/variants/STM32WL3x/WL31C(8-B)V/variant_generic.cpp new file mode 100644 index 0000000000..2d8f7a1b6a --- /dev/null +++ b/variants/STM32WL3x/WL31C(8-B)V/variant_generic.cpp @@ -0,0 +1,60 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_WL31C8VX) || defined(ARDUINO_GENERIC_WL31CBVX) +#include "pins_arduino.h" + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, // D0 + PA_1, // D1 + PA_2, // D2 + PA_3, // D3/A0 + PA_4, // D4 + PA_5, // D5 + PA_6, // D6 + PA_7, // D7 + PA_8, // D8 + PA_9, // D9 + PA_10, // D10 + PA_11, // D11 + PA_12, // D12 + PA_13, // D13 + PA_14, // D14 + PA_15, // D15 + PB_0, // D16 + PB_1, // D17/A1 + PB_2, // D18 + PB_3, // D19/A2 + PB_4, // D20 + PB_5, // D21/A3 + PB_6, // D22 + PB_7, // D23 + PB_8, // D24 + PB_9, // D25 + PB_10, // D26 + PB_11, // D27 + PB_12, // D28 + PB_13, // D29 + PB_14, // D30 + PB_15 // D31 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 3, // A0, PA3 + 17, // A1, PB1 + 19, // A2, PB3 + 21 // A3, PB5 +}; + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32WL3x/WL31C(8-B)V/variant_generic.h b/variants/STM32WL3x/WL31C(8-B)V/variant_generic.h new file mode 100644 index 0000000000..e9cc0d893d --- /dev/null +++ b/variants/STM32WL3x/WL31C(8-B)V/variant_generic.h @@ -0,0 +1,151 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 0 +#define PA1 1 +#define PA2 2 +#define PA3 PIN_A0 +#define PA4 4 +#define PA5 5 +#define PA6 6 +#define PA7 7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 16 +#define PB1 PIN_A1 +#define PB2 18 +#define PB3 PIN_A2 +#define PB4 20 +#define PB5 PIN_A3 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 26 +#define PB11 27 +#define PB12 28 +#define PB13 29 +#define PB14 30 +#define PB15 31 + +// Alternate pins number +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) + +#define NUM_DIGITAL_PINS 32 +#define NUM_ANALOG_INPUTS 4 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PNUM_NOT_DEFINED +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PNUM_NOT_DEFINED +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA9 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PB5 +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA11 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA8 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA3 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA1 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA0 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM16 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM2 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA8 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA1 +#endif + +// Alternate SYS_WKUP definition +#define PWR_WAKEUP_PIN8_1 + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/CMakeLists.txt b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/CMakeLists.txt new file mode 100644 index 0000000000..2a4d55b6b1 --- /dev/null +++ b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/CMakeLists.txt @@ -0,0 +1,31 @@ +# v3.21 implemented semantic changes regarding $ +# See https://cmake.org/cmake/help/v3.21/command/target_link_libraries.html#linking-object-libraries-via-target-objects +cmake_minimum_required(VERSION 3.21) + +add_library(variant INTERFACE) +add_library(variant_usage INTERFACE) + +target_include_directories(variant_usage INTERFACE + . +) + + +target_link_libraries(variant_usage INTERFACE + base_config +) + +target_link_libraries(variant INTERFACE variant_usage) + + + +add_library(variant_bin STATIC EXCLUDE_FROM_ALL + generic_clock.c + PeripheralPins.c + variant_generic.cpp +) +target_link_libraries(variant_bin PUBLIC variant_usage) + +target_link_libraries(variant INTERFACE + variant_bin +) + diff --git a/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/PeripheralPins.c b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/PeripheralPins.c new file mode 100644 index 0000000000..e5060e62cf --- /dev/null +++ b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/PeripheralPins.c @@ -0,0 +1,171 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32WL31K8Vx.xml, STM32WL31KBVx.xml + * STM32WL33K8Vx.xml, STM32WL33K8VxX.xml + * STM32WL33KBVx.xml, STM32WL33KBVxX.xml + * STM32WL33KCVx.xml, STM32WL33KCVxX.xml + * CubeMX DB release 6.0.150 + */ +#if !defined(CUSTOM_PERIPHERAL_PINS) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_VINP2 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_VINP1 + {NC, NP, 0} +}; +#endif + +//*** No DAC *** + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_1, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_0, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** No I3C *** + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 2, 0)}, // TIM2_CH2 + {PA_3_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PA_8, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PA_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PB_0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_6, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PB_12, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PB_13, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_0, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_7, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_8, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_9, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/PinNamesVar.h b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/PinNamesVar.h new file mode 100644 index 0000000000..22b13e983c --- /dev/null +++ b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/PinNamesVar.h @@ -0,0 +1,55 @@ +/* Alternate pin name */ +PA_2_ALT1 = PA_2 | ALT1, +PA_3_ALT1 = PA_3 | ALT1, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PB_0, /* SYS_WKUP0 */ +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = PB_1, /* SYS_WKUP1 */ +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = PB_2, /* SYS_WKUP2 */ +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = NC, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = NC, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = PB_6, /* SYS_WKUP6 */ +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = PB_7, /* SYS_WKUP7 */ +#endif +#ifdef PWR_WAKEUP_PIN9 + SYS_WKUP9 = PA_8, /* SYS_WKUP8 */ +#endif +#ifdef PWR_WAKEUP_PIN10 + SYS_WKUP10 = PA_9, /* SYS_WKUP9 */ +#endif +#ifdef PWR_WAKEUP_PIN11 + SYS_WKUP11 = PA_10, /* SYS_WKUP10 */ +#endif +#ifdef PWR_WAKEUP_PIN12 + SYS_WKUP12 = PA_11, /* SYS_WKUP11 */ +#endif +#ifdef PWR_WAKEUP_PIN13 + SYS_WKUP13 = PA_0, /* SYS_WKUP12 */ +#endif +#ifdef PWR_WAKEUP_PIN14 + SYS_WKUP14 = PA_1, /* SYS_WKUP13 */ +#endif +#ifdef PWR_WAKEUP_PIN15 + SYS_WKUP15 = PA_2, /* SYS_WKUP14 */ +#endif +#ifdef PWR_WAKEUP_PIN16 + SYS_WKUP16 = PA_3, /* SYS_WKUP15 */ +#endif + +/* No USB */ diff --git a/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/boards_entry.txt b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/boards_entry.txt new file mode 100644 index 0000000000..99f9923341 --- /dev/null +++ b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/boards_entry.txt @@ -0,0 +1,77 @@ +# This file help to add generic board entry. +# upload.maximum_size and product_line have to be verified +# and changed if needed. +# See: https://github.com/stm32duino/Arduino_Core_STM32/wiki/Add-a-new-variant-%28board%29 + +# Generic WL31K8Vx +GenWL3.menu.pnum.GENERIC_WL31K8VX=Generic WL31K8Vx +GenWL3.menu.pnum.GENERIC_WL31K8VX.upload.maximum_size=65536 +GenWL3.menu.pnum.GENERIC_WL31K8VX.upload.maximum_data_size=8192 +GenWL3.menu.pnum.GENERIC_WL31K8VX.build.board=GENERIC_WL31K8VX +GenWL3.menu.pnum.GENERIC_WL31K8VX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL31K8VX.build.variant=STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL31K8VX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL31.svd + +# Generic WL31KBVx +GenWL3.menu.pnum.GENERIC_WL31KBVX=Generic WL31KBVx +GenWL3.menu.pnum.GENERIC_WL31KBVX.upload.maximum_size=131072 +GenWL3.menu.pnum.GENERIC_WL31KBVX.upload.maximum_data_size=16384 +GenWL3.menu.pnum.GENERIC_WL31KBVX.build.board=GENERIC_WL31KBVX +GenWL3.menu.pnum.GENERIC_WL31KBVX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL31KBVX.build.variant=STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL31KBVX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL31.svd + +# Generic WL33K8Vx +GenWL3.menu.pnum.GENERIC_WL33K8VX=Generic WL33K8Vx +GenWL3.menu.pnum.GENERIC_WL33K8VX.upload.maximum_size=65536 +GenWL3.menu.pnum.GENERIC_WL33K8VX.upload.maximum_data_size=16384 +GenWL3.menu.pnum.GENERIC_WL33K8VX.build.board=GENERIC_WL33K8VX +GenWL3.menu.pnum.GENERIC_WL33K8VX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33K8VX.build.variant=STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33K8VX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33K8VxX +GenWL3.menu.pnum.GENERIC_WL33K8VXX=Generic WL33K8VxX +GenWL3.menu.pnum.GENERIC_WL33K8VXX.upload.maximum_size=65536 +GenWL3.menu.pnum.GENERIC_WL33K8VXX.upload.maximum_data_size=16384 +GenWL3.menu.pnum.GENERIC_WL33K8VXX.build.board=GENERIC_WL33K8VXX +GenWL3.menu.pnum.GENERIC_WL33K8VXX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33K8VXX.build.variant=STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33K8VXX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33KBVx +GenWL3.menu.pnum.GENERIC_WL33KBVX=Generic WL33KBVx +GenWL3.menu.pnum.GENERIC_WL33KBVX.upload.maximum_size=131072 +GenWL3.menu.pnum.GENERIC_WL33KBVX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33KBVX.build.board=GENERIC_WL33KBVX +GenWL3.menu.pnum.GENERIC_WL33KBVX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33KBVX.build.variant=STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33KBVX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33KBVxX +GenWL3.menu.pnum.GENERIC_WL33KBVXX=Generic WL33KBVxX +GenWL3.menu.pnum.GENERIC_WL33KBVXX.upload.maximum_size=131072 +GenWL3.menu.pnum.GENERIC_WL33KBVXX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33KBVXX.build.board=GENERIC_WL33KBVXX +GenWL3.menu.pnum.GENERIC_WL33KBVXX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33KBVXX.build.variant=STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33KBVXX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33KCVx +GenWL3.menu.pnum.GENERIC_WL33KCVX=Generic WL33KCVx +GenWL3.menu.pnum.GENERIC_WL33KCVX.upload.maximum_size=262144 +GenWL3.menu.pnum.GENERIC_WL33KCVX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33KCVX.build.board=GENERIC_WL33KCVX +GenWL3.menu.pnum.GENERIC_WL33KCVX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33KCVX.build.variant=STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33KCVX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33KCVxX +GenWL3.menu.pnum.GENERIC_WL33KCVXX=Generic WL33KCVxX +GenWL3.menu.pnum.GENERIC_WL33KCVXX.upload.maximum_size=262144 +GenWL3.menu.pnum.GENERIC_WL33KCVXX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33KCVXX.build.board=GENERIC_WL33KCVXX +GenWL3.menu.pnum.GENERIC_WL33KCVXX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33KCVXX.build.variant=STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33KCVXX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + diff --git a/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/generic_clock.c b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/generic_clock.c new file mode 100644 index 0000000000..881a4c6abc --- /dev/null +++ b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/generic_clock.c @@ -0,0 +1,30 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_WL31K8VX) || defined(ARDUINO_GENERIC_WL31KBVX) ||\ + defined(ARDUINO_GENERIC_WL33K8VX) || defined(ARDUINO_GENERIC_WL33K8VXX) ||\ + defined(ARDUINO_GENERIC_WL33KBVX) || defined(ARDUINO_GENERIC_WL33KBVXX) ||\ + defined(ARDUINO_GENERIC_WL33KCVX) || defined(ARDUINO_GENERIC_WL33KCVXX) +#include "pins_arduino.h" + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + /* SystemClock_Config can be generated by STM32CubeMX */ +#warning "SystemClock_Config() is empty. Default clock at reset is used." +} + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/variant_generic.cpp b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/variant_generic.cpp new file mode 100644 index 0000000000..d3ca4c4650 --- /dev/null +++ b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/variant_generic.cpp @@ -0,0 +1,46 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_WL31K8VX) || defined(ARDUINO_GENERIC_WL31KBVX) ||\ + defined(ARDUINO_GENERIC_WL33K8VX) || defined(ARDUINO_GENERIC_WL33K8VXX) ||\ + defined(ARDUINO_GENERIC_WL33KBVX) || defined(ARDUINO_GENERIC_WL33KBVXX) ||\ + defined(ARDUINO_GENERIC_WL33KCVX) || defined(ARDUINO_GENERIC_WL33KCVXX) +#include "pins_arduino.h" + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, // D0 + PA_1, // D1 + PA_2, // D2 + PA_3, // D3/A0 + PA_8, // D4 + PA_9, // D5 + PA_10, // D6 + PA_11, // D7 + PB_0, // D8 + PB_1, // D9/A1 + PB_2, // D10 + PB_6, // D11 + PB_7, // D12 + PB_12, // D13 + PB_13, // D14 + PB_14, // D15 + PB_15 // D16 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 3, // A0, PA3 + 9 // A1, PB1 +}; + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/variant_generic.h b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/variant_generic.h new file mode 100644 index 0000000000..d095dc11cc --- /dev/null +++ b/variants/STM32WL3x/WL31K(8-B)V_WL33K(8-B-C)Vx(X)/variant_generic.h @@ -0,0 +1,133 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 0 +#define PA1 1 +#define PA2 2 +#define PA3 PIN_A0 +#define PA8 4 +#define PA9 5 +#define PA10 6 +#define PA11 7 +#define PB0 8 +#define PB1 PIN_A1 +#define PB2 10 +#define PB6 11 +#define PB7 12 +#define PB12 13 +#define PB13 14 +#define PB14 15 +#define PB15 16 + +// Alternate pins number +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) + +#define NUM_DIGITAL_PINS 17 +#define NUM_ANALOG_INPUTS 2 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PNUM_NOT_DEFINED +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PNUM_NOT_DEFINED +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA9 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA11 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA8 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA3 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA1 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA0 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM16 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM2 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA8 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA1 +#endif + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/CMakeLists.txt b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/CMakeLists.txt new file mode 100644 index 0000000000..0b94dae5d0 --- /dev/null +++ b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/CMakeLists.txt @@ -0,0 +1,32 @@ +# v3.21 implemented semantic changes regarding $ +# See https://cmake.org/cmake/help/v3.21/command/target_link_libraries.html#linking-object-libraries-via-target-objects +cmake_minimum_required(VERSION 3.21) + +add_library(variant INTERFACE) +add_library(variant_usage INTERFACE) + +target_include_directories(variant_usage INTERFACE + . +) + + +target_link_libraries(variant_usage INTERFACE + base_config +) + +target_link_libraries(variant INTERFACE variant_usage) + + + +add_library(variant_bin STATIC EXCLUDE_FROM_ALL + generic_clock.c + PeripheralPins.c + variant_generic.cpp + variant_NUCLEO_WL33CC1.cpp +) +target_link_libraries(variant_bin PUBLIC variant_usage) + +target_link_libraries(variant INTERFACE + variant_bin +) + diff --git a/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/PeripheralPins.c b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/PeripheralPins.c new file mode 100644 index 0000000000..87933261c6 --- /dev/null +++ b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/PeripheralPins.c @@ -0,0 +1,221 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +/* + * Automatically generated from STM32WL33C8Vx.xml, STM32WL33C8VxX.xml + * STM32WL33CBVx.xml, STM32WL33CBVxX.xml + * STM32WL33CCVx.xml, STM32WL33CCVxX.xml + * CubeMX DB release 6.0.150 + */ +#if !defined(CUSTOM_PERIPHERAL_PINS) +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Notes: + * - The pins mentioned Px_y_ALTz are alternative possibilities which use other + * HW peripheral instances. You can use them the same way as any other "normal" + * pin (i.e. analogWrite(PA7_ALT1, 128);). + * + * - Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_VINP2 + {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_VINP1 + {PB_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_VINP0 + {PB_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_VINP3 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { + {PA_13, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1 + {NC, NP, 0} +}; +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PA_1, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {PA_7, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C2)}, + {PA_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C2)}, + {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {PB_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SCL[] = { + {PA_0, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {PA_6, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C2)}, + {PA_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C2)}, + {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {PB_11, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF0_I2C1)}, + {NC, NP, 0} +}; +#endif + +//*** No I3C *** + +//*** TIM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_TIM[] = { + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PA_2_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 2, 0)}, // TIM2_CH2 + {PA_3_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PA_4, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 2, 0)}, // TIM2_CH2 + {PA_6, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PA_7, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 2, 0)}, // TIM2_CH2 + {PA_8, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PA_9, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PA_12, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PB_0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 0)}, // TIM16_CH1 + {PB_1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM16, 1, 1)}, // TIM16_CH1N + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PB_6, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PB_8, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 2, 0)}, // TIM2_CH2 + {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 1, 0)}, // TIM2_CH1 + {PB_12, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 3, 0)}, // TIM2_CH3 + {PB_13, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM2, 4, 0)}, // TIM2_CH4 + {NC, NP, 0} +}; +#endif + +//*** UART *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_1, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_4, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_4, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RX[] = { + {PA_5, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PA_8, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_5, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_8, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_RTS[] = { + {PA_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_0, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_2, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PB_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_CTS[] = { + {PA_0, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)}, + {PA_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)}, + {PB_9, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_LPUART1)}, + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_7, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_9, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_8, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PA_14, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_8, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PA_13, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {NC, NP, 0} +}; +#endif + +#ifdef HAL_SPI_MODULE_ENABLED +WEAK const PinMap PinMap_SPI_SSEL[] = { + {PA_9, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_0, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI3)}, + {PB_10, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI1)}, + {NC, NP, 0} +}; +#endif + +//*** No CAN *** + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** No USB *** + +//*** No SD *** + +#endif /* !CUSTOM_PERIPHERAL_PINS */ diff --git a/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/PinNamesVar.h b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/PinNamesVar.h new file mode 100644 index 0000000000..48cd6276bc --- /dev/null +++ b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/PinNamesVar.h @@ -0,0 +1,58 @@ +/* Alternate pin name */ +PA_2_ALT1 = PA_2 | ALT1, +PA_3_ALT1 = PA_3 | ALT1, + +/* SYS_WKUP */ +#ifdef PWR_WAKEUP_PIN1 + SYS_WKUP1 = PB_0, /* SYS_WKUP0 */ +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = PB_1, /* SYS_WKUP1 */ +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = PB_2, /* SYS_WKUP2 */ +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = PB_3, /* SYS_WKUP3 */ +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = PB_4, /* SYS_WKUP4 */ +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = PB_5, /* SYS_WKUP5 */ +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = PB_6, /* SYS_WKUP6 */ +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = PA_7, /* SYS_WKUP7 */ +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8_1 = PB_7, /* SYS_WKUP7 */ +#endif +#ifdef PWR_WAKEUP_PIN9 + SYS_WKUP9 = PA_8, /* SYS_WKUP8 */ +#endif +#ifdef PWR_WAKEUP_PIN10 + SYS_WKUP10 = PA_9, /* SYS_WKUP9 */ +#endif +#ifdef PWR_WAKEUP_PIN11 + SYS_WKUP11 = PA_10, /* SYS_WKUP10 */ +#endif +#ifdef PWR_WAKEUP_PIN12 + SYS_WKUP12 = PA_11, /* SYS_WKUP11 */ +#endif +#ifdef PWR_WAKEUP_PIN13 + SYS_WKUP13 = PA_0, /* SYS_WKUP12 */ +#endif +#ifdef PWR_WAKEUP_PIN14 + SYS_WKUP14 = PA_1, /* SYS_WKUP13 */ +#endif +#ifdef PWR_WAKEUP_PIN15 + SYS_WKUP15 = PA_2, /* SYS_WKUP14 */ +#endif +#ifdef PWR_WAKEUP_PIN16 + SYS_WKUP16 = PA_3, /* SYS_WKUP15 */ +#endif + +/* No USB */ diff --git a/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/boards_entry.txt b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/boards_entry.txt new file mode 100644 index 0000000000..fafd83d986 --- /dev/null +++ b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/boards_entry.txt @@ -0,0 +1,59 @@ +# This file help to add generic board entry. +# upload.maximum_size and product_line have to be verified +# and changed if needed. +# See: https://github.com/stm32duino/Arduino_Core_STM32/wiki/Add-a-new-variant-%28board%29 + +# Generic WL33C8Vx +GenWL3.menu.pnum.GENERIC_WL33C8VX=Generic WL33C8Vx +GenWL3.menu.pnum.GENERIC_WL33C8VX.upload.maximum_size=65536 +GenWL3.menu.pnum.GENERIC_WL33C8VX.upload.maximum_data_size=16384 +GenWL3.menu.pnum.GENERIC_WL33C8VX.build.board=GENERIC_WL33C8VX +GenWL3.menu.pnum.GENERIC_WL33C8VX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33C8VX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33C8VX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33C8VxX +GenWL3.menu.pnum.GENERIC_WL33C8VXX=Generic WL33C8VxX +GenWL3.menu.pnum.GENERIC_WL33C8VXX.upload.maximum_size=65536 +GenWL3.menu.pnum.GENERIC_WL33C8VXX.upload.maximum_data_size=16384 +GenWL3.menu.pnum.GENERIC_WL33C8VXX.build.board=GENERIC_WL33C8VXX +GenWL3.menu.pnum.GENERIC_WL33C8VXX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33C8VXX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33C8VXX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33CBVx +GenWL3.menu.pnum.GENERIC_WL33CBVX=Generic WL33CBVx +GenWL3.menu.pnum.GENERIC_WL33CBVX.upload.maximum_size=131072 +GenWL3.menu.pnum.GENERIC_WL33CBVX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33CBVX.build.board=GENERIC_WL33CBVX +GenWL3.menu.pnum.GENERIC_WL33CBVX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33CBVX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33CBVX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33CBVxX +GenWL3.menu.pnum.GENERIC_WL33CBVXX=Generic WL33CBVxX +GenWL3.menu.pnum.GENERIC_WL33CBVXX.upload.maximum_size=131072 +GenWL3.menu.pnum.GENERIC_WL33CBVXX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33CBVXX.build.board=GENERIC_WL33CBVXX +GenWL3.menu.pnum.GENERIC_WL33CBVXX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33CBVXX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33CBVXX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33CCVx +GenWL3.menu.pnum.GENERIC_WL33CCVX=Generic WL33CCVx +GenWL3.menu.pnum.GENERIC_WL33CCVX.upload.maximum_size=262144 +GenWL3.menu.pnum.GENERIC_WL33CCVX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33CCVX.build.board=GENERIC_WL33CCVX +GenWL3.menu.pnum.GENERIC_WL33CCVX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33CCVX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33CCVX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + +# Generic WL33CCVxX +GenWL3.menu.pnum.GENERIC_WL33CCVXX=Generic WL33CCVxX +GenWL3.menu.pnum.GENERIC_WL33CCVXX.upload.maximum_size=262144 +GenWL3.menu.pnum.GENERIC_WL33CCVXX.upload.maximum_data_size=32768 +GenWL3.menu.pnum.GENERIC_WL33CCVXX.build.board=GENERIC_WL33CCVXX +GenWL3.menu.pnum.GENERIC_WL33CCVXX.build.product_line=STM32WL3xx +GenWL3.menu.pnum.GENERIC_WL33CCVXX.build.variant=STM32WL3x/WL33C(8-B-C)Vx(X) +GenWL3.menu.pnum.GENERIC_WL33CCVXX.debug.svd_file={runtime.tools.STM32_SVD.path}/svd/STM32WL3x/STM32WL33.svd + diff --git a/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/generic_clock.c b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/generic_clock.c new file mode 100644 index 0000000000..3b394221d1 --- /dev/null +++ b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/generic_clock.c @@ -0,0 +1,56 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_WL33C8VX) || defined(ARDUINO_GENERIC_WL33C8VXX) ||\ + defined(ARDUINO_GENERIC_WL33CBVX) || defined(ARDUINO_GENERIC_WL33CBVXX) ||\ + defined(ARDUINO_GENERIC_WL33CCVX) || defined(ARDUINO_GENERIC_WL33CCVXX) +#include "pins_arduino.h" + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + + /** Configure the SYSCLKSource and SYSCLKDivider + */ + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.SYSCLKDivider = RCC_RC64MPLL_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_WAIT_STATES_1) != HAL_OK) { + Error_Handler(); + } + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS; + PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLK_DIV2; + PeriphClkInitStruct.KRMRateMultiplier = 2; + + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { + Error_Handler(); + } +} + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/ldscript.ld b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/ldscript.ld new file mode 100644 index 0000000000..94ad364ef7 --- /dev/null +++ b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/ldscript.ld @@ -0,0 +1,218 @@ +/******************************************************************************* +* STM32WL3x generic linker file for GCC +* Main linker variables to control it are: +* +* MEMORY_FLASH_APP_SIZE: define the size of the application in case not all the flash is needed. +* Default value is: 256KB +* +* MEMORY_FLASH_APP_OFFSET: define the offset of the application. +* Default value is: 0 offset +* +* MEMORY_RAM_APP_OFFSET: define the offset in RAM from which variables can be +* allocated. +* +*******************************************************************************/ + +/******************************************************************************* +* Memory Definitions +*******************************************************************************/ +/* +STM32WL3x memory map ++-----------------------+ 0x20007FFF +| RAM (32K) | ++-----------------------+ 0x20000000 +| | +| | ++-----------------------+ 0x1007FFFF +| | +| FLASH (256K) | ++-----------------------+ 0x10040000 +| | ++-----------------------| 0x100017FF +| ROM (6K) | ++-----------------------+ 0x10000000 +*/ + + +_MEMORY_RAM_BEGIN_ = 0x20000000; +_MEMORY_RAM_SIZE_ = LD_MAX_DATA_SIZE; +_MEMORY_RAM_END_ = 0x20007FFF; + +_MEMORY_FLASH_BEGIN_ = 0x10040000; +_MEMORY_FLASH_SIZE_ = LD_MAX_SIZE; +_MEMORY_FLASH_END_ = 0x1007FFFF; + +_MEMORY_ROM_BEGIN_ = 0x10000000; +_MEMORY_ROM_SIZE_ = 0x01800; +_MEMORY_ROM_END_ = 0x100017FF; + + +MEMORY_FLASH_APP_OFFSET = DEFINED(MEMORY_FLASH_APP_OFFSET) ? (MEMORY_FLASH_APP_OFFSET) : (LD_FLASH_OFFSET) ; +MEMORY_FLASH_APP_SIZE = DEFINED(MEMORY_FLASH_APP_SIZE) ? (MEMORY_FLASH_APP_SIZE) : (_MEMORY_FLASH_SIZE_ - MEMORY_FLASH_APP_OFFSET); +RESET_MANAGER_SIZE = DEFINED(RESET_MANAGER_SIZE) ? (RESET_MANAGER_SIZE) : (0x800) ; + + +/* Entry Point */ +ENTRY(Reset_Handler) + + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x0; /* required amount of heap */ +_Min_Stack_Size = 0xC00; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + RAM (xrw) : ORIGIN = _MEMORY_RAM_BEGIN_, LENGTH = _MEMORY_RAM_SIZE_ + REGION_FLASH_BOOTLOADER (rx) : ORIGIN = _MEMORY_FLASH_BEGIN_, LENGTH = MEMORY_FLASH_APP_OFFSET + FLASH (rx) : ORIGIN = _MEMORY_FLASH_BEGIN_ + MEMORY_FLASH_APP_OFFSET, LENGTH = MEMORY_FLASH_APP_SIZE + REGION_ROM (rx) : ORIGIN = _MEMORY_ROM_BEGIN_, LENGTH = _MEMORY_ROM_SIZE_ +} + +/* Define output sections */ +SECTIONS +{ + + /* The startup code goes first into FLASH */ + .intvec (ORIGIN(FLASH)) : + { + . = ALIGN(4); + KEEP(*(.intvec)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + + KEEP(*(.cmd_call_table)) + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(i.*) /* i.* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.constdata) + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; + } >FLASH + + .preinit_array (READONLY) : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array (READONLY) : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array (READONLY) : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* RAM preamble, uninitialized */ + .ram_preamble 0x20000004 (NOLOAD) : + { + KEEP(*(.ram_vr)) + } >RAM AT> FLASH + + /* RAM preamble, unininitialized */ + .ram_preamble_2 0x20000034 (NOLOAD) : + { + KEEP(*(.crash_info_ram_vr)) + } >RAM + /* Uninitialized data section */ + .bss DEFINED(MEMORY_RAM_APP_OFFSET) ? (ORIGIN(RAM) + MEMORY_RAM_APP_OFFSET) : . : + { + . = ALIGN(4); + _sbss = .; /* define a global symbol at bss start */ + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + } >RAM + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Data section that will not be initialized to any value. */ + .noinit (NOLOAD): + { + . = ALIGN(4); + *(.noinit) + . = ALIGN(4); + } >RAM + + .heap (NOLOAD): + { + . = ALIGN(4); + _sheap = .; + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = ALIGN(4); + _eheap = .; + } >RAM + + CSTACK (ORIGIN(RAM) + LENGTH(RAM) - _Min_Stack_Size) (NOLOAD) : + { + . = ALIGN(4); + . = . + _Min_Stack_Size; + . = ALIGN(4); + _estack = .; /* define a global symbol at stack end */ + . = ALIGN(4); + } > RAM + + .rom_info (NOLOAD) : + { + . = ALIGN(4); + KEEP(*(.rom_info)) + . = ALIGN(4); + } >REGION_ROM + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_NUCLEO_WL33CC1.cpp b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_NUCLEO_WL33CC1.cpp new file mode 100644 index 0000000000..04bcd35283 --- /dev/null +++ b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_NUCLEO_WL33CC1.cpp @@ -0,0 +1,105 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_NUCLEO_WL33CC1) +#include "pins_arduino.h" + +// Digital PinName array +const PinName digitalPin[] = { + PB_7, // D0 + PB_6, // D1 + PA_9, // D2 + PA_0, // D3 + PA_8, // D4 + PA_13, // D5 + PA_12, // D6 + PA_4, // D7 + PA_5, // D8 + PA_14, // D9 + PB_10, // D10 + PB_9, // D11 + PB_8, // D12 + PB_11, // D13 + PA_7, // D14 + PA_6, // D15 + PB_0, // D16 + PB_1, // D17/A0 + PB_2, // D18 + PB_3, // D19/A1 + PB_14, // D20 + PB_5, // D21/A2 + PA_1, // D22 + PA_15, // D23 + PB_4, // D24 + PB_15, // D25 + PA_2, // D26 + PA_3, // D27 + PA_10, // D28 + PA_11, // D29 + PB_12, // D30 + PB_13 // D31 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 17, // A0, PB1 + 19, // A1, PB3 + 21 // A2, PB5 +}; + +// ---------------------------------------------------------------------------- +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief System Clock Configuration + * @param None + * @retval None + */ +WEAK void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {}; + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + Error_Handler(); + } + + /** Configure the SYSCLKSource and SYSCLKDivider + */ + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.SYSCLKDivider = RCC_RC64MPLL_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_WAIT_STATES_1) != HAL_OK) { + Error_Handler(); + } + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS; + PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLK_DIV2; + PeriphClkInitStruct.KRMRateMultiplier = 2; + + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { + Error_Handler(); + } +} + +#ifdef __cplusplus +} +#endif +#endif /* ARDUINO_NUCLEO_WL33CC1 */ diff --git a/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_NUCLEO_WL33CC1.h b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_NUCLEO_WL33CC1.h new file mode 100644 index 0000000000..62dbdb09d2 --- /dev/null +++ b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_NUCLEO_WL33CC1.h @@ -0,0 +1,135 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PB7 0 +#define PB6 1 +#define PA9 2 +#define PA0 3 +#define PA8 4 +#define PA13 5 +#define PA12 6 +#define PA4 7 +#define PA5 8 +#define PA14 9 +#define PB10 10 +#define PB9 11 +#define PB8 12 +#define PB11 13 +#define PA7 14 +#define PA6 15 +#define PB0 16 +#define PB1 PIN_A0 +#define PB2 18 +#define PB3 PIN_A1 +#define PB14 20 +#define PB5 PIN_A2 +#define PA1 22 // VCP RX +#define PA15 23 // VCP TX +#define PB4 24 // LD2 +#define PB15 25 // LD3 +#define PA2 26 // SWDIO +#define PA3 27 // SWCLK +#define PA10 28 // BOOT0 +#define PA11 29 +#define PB12 30 // OSC_32_OUT +#define PB13 31 // OSC_32_IN + + +// Alternate pins number +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) + +#define NUM_DIGITAL_PINS 32 +#define NUM_ANALOG_INPUTS 3 + +// On-board LED pin number +#define LED_BLUE PA14 +#define LED_LD1 LED_BLUE +#define LED_GREEN PB4 +#define LED_LD2 LED_GREEN +#define LED_RED PB5 +#define LED_LD3 LED_RED +#ifndef LED_BUILTIN + #define LED_BUILTIN LED_BLUE +#endif + +// On-board user button +#define USER_B1 PA0 +#define USER_B2 PB11 +#define USER_B3 PB15 +#ifndef USER_BTN + #define USER_BTN USER_B1 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM16 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM2 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA15 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA1 +#endif + +// Extra HAL modules +#if !defined(HAL_DAC_MODULE_DISABLED) + #define HAL_DAC_MODULE_ENABLED +#endif + +// Alternate SYS_WKUP definition +#define PWR_WAKEUP_PIN8_1 + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif diff --git a/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_generic.cpp b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_generic.cpp new file mode 100644 index 0000000000..cdc9964ee6 --- /dev/null +++ b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_generic.cpp @@ -0,0 +1,62 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#if defined(ARDUINO_GENERIC_WL33C8VX) || defined(ARDUINO_GENERIC_WL33C8VXX) ||\ + defined(ARDUINO_GENERIC_WL33CBVX) || defined(ARDUINO_GENERIC_WL33CBVXX) ||\ + defined(ARDUINO_GENERIC_WL33CCVX) || defined(ARDUINO_GENERIC_WL33CCVXX) +#include "pins_arduino.h" + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, // D0 + PA_1, // D1 + PA_2, // D2 + PA_3, // D3/A0 + PA_4, // D4 + PA_5, // D5 + PA_6, // D6 + PA_7, // D7 + PA_8, // D8 + PA_9, // D9 + PA_10, // D10 + PA_11, // D11 + PA_12, // D12 + PA_13, // D13 + PA_14, // D14 + PA_15, // D15 + PB_0, // D16 + PB_1, // D17/A1 + PB_2, // D18 + PB_3, // D19/A2 + PB_4, // D20 + PB_5, // D21/A3 + PB_6, // D22 + PB_7, // D23 + PB_8, // D24 + PB_9, // D25 + PB_10, // D26 + PB_11, // D27 + PB_12, // D28 + PB_13, // D29 + PB_14, // D30 + PB_15 // D31 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 3, // A0, PA3 + 17, // A1, PB1 + 19, // A2, PB3 + 21 // A3, PB5 +}; + +#endif /* ARDUINO_GENERIC_* */ diff --git a/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_generic.h b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_generic.h new file mode 100644 index 0000000000..4190b198af --- /dev/null +++ b/variants/STM32WL3x/WL33C(8-B-C)Vx(X)/variant_generic.h @@ -0,0 +1,156 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ +#pragma once + +/*---------------------------------------------------------------------------- + * STM32 pins number + *----------------------------------------------------------------------------*/ +#define PA0 0 +#define PA1 1 +#define PA2 2 +#define PA3 PIN_A0 +#define PA4 4 +#define PA5 5 +#define PA6 6 +#define PA7 7 +#define PA8 8 +#define PA9 9 +#define PA10 10 +#define PA11 11 +#define PA12 12 +#define PA13 13 +#define PA14 14 +#define PA15 15 +#define PB0 16 +#define PB1 PIN_A1 +#define PB2 18 +#define PB3 PIN_A2 +#define PB4 20 +#define PB5 PIN_A3 +#define PB6 22 +#define PB7 23 +#define PB8 24 +#define PB9 25 +#define PB10 26 +#define PB11 27 +#define PB12 28 +#define PB13 29 +#define PB14 30 +#define PB15 31 + +// Alternate pins number +#define PA2_ALT1 (PA2 | ALT1) +#define PA3_ALT1 (PA3 | ALT1) + +#define NUM_DIGITAL_PINS 32 +#define NUM_ANALOG_INPUTS 4 + +// On-board LED pin number +#ifndef LED_BUILTIN + #define LED_BUILTIN PNUM_NOT_DEFINED +#endif + +// On-board user button +#ifndef USER_BTN + #define USER_BTN PNUM_NOT_DEFINED +#endif + +// SPI definitions +#ifndef PIN_SPI_SS + #define PIN_SPI_SS PA9 +#endif +#ifndef PIN_SPI_SS1 + #define PIN_SPI_SS1 PB5 +#endif +#ifndef PIN_SPI_SS2 + #define PIN_SPI_SS2 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_SS3 + #define PIN_SPI_SS3 PNUM_NOT_DEFINED +#endif +#ifndef PIN_SPI_MOSI + #define PIN_SPI_MOSI PA11 +#endif +#ifndef PIN_SPI_MISO + #define PIN_SPI_MISO PA8 +#endif +#ifndef PIN_SPI_SCK + #define PIN_SPI_SCK PA3 +#endif + +// I2C definitions +#ifndef PIN_WIRE_SDA + #define PIN_WIRE_SDA PA1 +#endif +#ifndef PIN_WIRE_SCL + #define PIN_WIRE_SCL PA0 +#endif + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM16 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM2 +#endif + +// UART Definitions +#ifndef SERIAL_UART_INSTANCE + #define SERIAL_UART_INSTANCE 1 +#endif + +// Default pin used for generic 'Serial' instance +// Mandatory for Firmata +#ifndef PIN_SERIAL_RX + #define PIN_SERIAL_RX PA8 +#endif +#ifndef PIN_SERIAL_TX + #define PIN_SERIAL_TX PA1 +#endif + +// Extra HAL modules +#if !defined(HAL_DAC_MODULE_DISABLED) + #define HAL_DAC_MODULE_ENABLED +#endif + +// Alternate SYS_WKUP definition +#define PWR_WAKEUP_PIN8_1 + +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #ifndef SERIAL_PORT_MONITOR + #define SERIAL_PORT_MONITOR Serial + #endif + #ifndef SERIAL_PORT_HARDWARE + #define SERIAL_PORT_HARDWARE Serial + #endif +#endif