BUG : yernisia GUI (-G) failed to detect gtk

[Hamza1821]

i am using kali linux an i tried to use yernisia's gui .
i run command " yernisia -G" in my terminal but it give error like

" Hmmm... it seems that you don't have gtk support or Yersinia
has been configured with --disable-gtk option...
Go and get it!! "

however i tried all the method possible to solve this issue , i have downloaded correct version of GTK still the error never go off

[githubmaverick]

I've hit the same problem. Any fix/workaround identified?

[007gidon]

same, if you fixed tell me please

[007gidon]

I've hit the same problem. Any fix/workaround identified?

same, if you fixed tell me please

[Z3RX19]

Same problem here buddy

[Abdulkhaliq2006]

same problem

[Maggin16]

same problem

[007gidon]

I figured it out, go to chat gbt and ask him for installing yersinia with gtk mode. he will give you the commands but still you'll have an error, copy the the error and send him again, and he will fix it. should fix you with two chat gbt requests. if not, just keep copping your error and send him again. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Virus-free.www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

…

On Sun, Dec 24, 2023 at 6:29 PM Maggin16 ***@***.***> wrote: same problem — Reply to this email directly, view it on GitHub <#88 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AYPQDPQVJ6YFTC76HKSNB33YLBKALAVCNFSM6AAAAABARYGWD2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNRYGU2TGMZWHE> . You are receiving this because you commented.Message ID: ***@***.***>

[alecclyde]

Current workaround (still get some errors, but the Yersinia runs):

git clone https://github.com/tomac/yersinia /opt/yersinia
apt install autoconf libgtk-3-dev libnet1-dev libgtk2.0-dev
cd /opt/yersinia
./autogen.sh
./configure
make
make install

then it should run. Look for errors throughout each configure or autogen command for packages it tells you are missing.

[tarunsagarpandey]

Current workaround (still get some errors, but the Yersinia runs):

git clone https://github.com/tomac/yersinia /opt/yersinia
apt install autoconf libgtk-3-dev libnet1-dev libgtk2.0-dev
cd /opt/yersinia
./autogen.sh
./configure
make
make install

then it should run. Look for errors throughout each configure or autogen command for packages it tells you are missing.

Ya it's run but in the end dhcp not sending package not working

[RahulP2420]

All The Commands Used:

apt remove --auto-remove yersinia
apt purge --auto-remove yersinia

git clone [https://github.com/tomac/yersinia /opt/yersinia

apt install autoconf libgtk-3-dev libnet1-dev libgtk2.0-dev libpcap-dev -y

cd /opt/yersinia
./autogen.sh

./configure --with-gtk

make
make install

yersinia -G

[infosecconsultant]

Using a kali 2024.3 Everything build I did the following.

apt remove --auto-remove yersinia
apt purge --auto-remove yersinia

git clone https://github.com/infosecconsultant/yersinia.git
cd yersinia/
sudo apt update && sudo apt upgrade && sudo apt install autoconf automake autotools-dev libnet1-dev libgtk2.0-dev libpcap-dev
./autogen.sh
./configure
make
sudo make install

yersinia -G

There were some changes made to the admin.c file in my fork as well to get it to work, otherwise make failed.

[dcrypt404]

Using a kali 2024.3 Everything build I did the following.

apt remove --auto-remove yersinia
apt purge --auto-remove yersinia

git clone https://github.com/infosecconsultant/yersinia.git
cd yersinia/
sudo apt update && sudo apt upgrade && sudo apt install autoconf automake autotools-dev libnet1-dev libgtk2.0-dev libpcap-dev
./autogen.sh
./configure
make
sudo make install

yersinia -G

There were some changes made to the admin.c file in my fork as well to get it to work, otherwise make failed.

Thank you!!! I have been struggling for a week for my make file to work but it appears the changes you did to your admin.c file fixed my issue.

[karkarthikeya9]

Using a kali 2024.3 Everything build I did the following.

apt remove --auto-remove yersinia
apt purge --auto-remove yersinia

git clone https://github.com/infosecconsultant/yersinia.git
cd yersinia/
sudo apt update && sudo apt upgrade && sudo apt install autoconf automake autotools-dev libnet1-dev libgtk2.0-dev libpcap-dev
./autogen.sh
./configure
make
sudo make install

yersinia -G

There were some changes made to the admin.c file in my fork as well to get it to work, otherwise make failed.

Do you know what you've just done? I've been strugling with it for the whole weekend, now FINALLY the interface is running!! Tho is an alpha version and could have some bugs. Thank You!!❤️‍🔥