zwave poe board.

[JR2012thman]

This is perhaps a silly question but I wasn't able to connect to my tubez zwave POE board. How do I go about flashing the firmware again? I tried downloading the bin from the github and flashing that via the esphome web interface but It did not come back to life.

[tube0013]

Can you explain what is happening? when originally plugged into powered ethernet what LEDs came on? you should see a red and orange for power and green when ethernet connects.

[JR2012thman]

I have all three lights, but its not available on the ip address or discoverable in home assistant.

…

On Tue, Oct 1, 2024 at 12:58 PM tube0013 ***@***.***> wrote: Can you explain what is happening? when originally plugged into powered ethernet what LEDs came on? you should see a red and orange for power and green when ethernet connects. — Reply to this email directly, view it on GitHub <#207 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A4D7K3EKU3QJEJCPA4OFZQ3ZZLPENAVCNFSM6AAAAABPF73M4WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOBWGYZDENZQGM> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[tube0013]

are you able to go to the IP in a browser?

[JR2012thman]

that was why I reflashed the firmware.bin because I couldn't get to the ip on the port described on your site.

…

On Tue, Oct 1, 2024 at 3:22 PM tube0013 ***@***.***> wrote: are you able to go to the IP in a browser? — Reply to this email directly, view it on GitHub <#207 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A4D7K3GQDA4FBUBVMLZMLALZZL77DAVCNFSM6AAAAABPF73M4WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOBWHE4TMMRXGY> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[tube0013]

they are 2 different things.

The network serial port for connecting zwave-js is tcp://IP:6638

There is a esphome web frontend running at http:/IP