diff --git a/pages/build/assemble.mdx b/pages/build/assemble.mdx
index ddf829e..400c56c 100644
--- a/pages/build/assemble.mdx
+++ b/pages/build/assemble.mdx
@@ -9,6 +9,7 @@ This documentation is under construction and incomplete.
 
 **NOTES:**
 - All screws should have spring washers on them to prevent loosening. Especially on legs and hips
+- Ensure that you use m3x8 screws for the middle hole on servos
 
 1. Remove supports, prepare components for assembly
 
@@ -73,6 +74,18 @@ This documentation is under construction and incomplete.
   <Image src="/assemble/IMG_3571.webp" alt="Assembly step detail 2" width={3024} height={2268} />
 </div>
 
+9. Plug in short and long wire to hip servo, thread long wire up towards head and short wire through the back hole to the top thigh
+
+10. Secure hip servos
+
+11. NOW connect the hip orange part to the hip servos
+12. Secure chest servos in place (these should be black not red striped, the red striped ones go to the hips)
+13. Screw shoulders onto torso
+14. Screw together the servos for the arms, should look like this when finished
+15. Attach arms to shoulders
+16. Connect long wires to the body side port on the shoulder servos and thread them through the holes towards the head
+17. Connect shorter wires from the unused port on the shoulder servo to the opposite port on the elbow
+
 <div className="grid grid-cols-2 gap-4 mt-4">
   <Image src="/assemble/IMG_3572.webp" alt="Assembly step detail 3" width={3024} height={2268} />
   <Image src="/assemble/IMG_3573.webp" alt="Assembly step detail 4" width={3024} height={2268} />