Lichee-Jack-3dp

3D‑printed enclosure designs for Lichee‑Jack.

This repository contains the printable case files (STL) and mechanical notes for assembling Lichee‑Jack. For detailed assembly instructions, print settings, and photos, please visit the official documentation:

Lichee‑Jack Wiki: https://kaliassistant.github.io/Lichee-Jack-wiki/docs/hardware/2_3dp

---

Contents

Lichee-Jack-3dp/
├─ accessories/     # Optional printed accessories
│  ├─ Lichee-Jack-badge.stl
│  ├─ Lichee-Jack-hat.stl
│  ├─ Lichee-Jack-header-baffle-nologo.stl
│  └─ Lichee-Jack-header-baffle-with-logo.stl
├─ cases/           # Main enclosure parts
│  ├─ Lichee-Jack-top.stl
│  ├─ Lichee-Jack-bottom.stl
│  ├─ Lichee-Jack-switch.stl
│  ├─ Lichee-Jack-USB-Debugger/  # USB Debugger enclosure parts
│  │  ├─ Lichee-Jack-USB-Debugger-top.stl
│  │  ├─ Lichee-Jack-USB-Debugger-bottom.stl
│  │  ├─ Lichee-Jack_USB-Debugger.glb
│  │  └─ Lichee-Jack_USB-Debugger.step
│  └─ Lichee-Jack-Debugger-Cable/  # Debugger Cable (HyperMicro) enclosure parts
│     ├─ SP1_TOP.stl
│     ├─ SP1_BTM.stl
│     ├─ SP2_TOP.stl
│     ├─ SP2_BTM.stl
│     ├─ SP3_TOP.stl
│     ├─ SP3_BTM.stl
│     ├─ SP3_TPU.stl
│     ├─ Lichee-Jack-Debugger-Cable.glb
│     └─ Lichee-Jack-Debugger-Cable.step.xz  # Too Large
├─ LICENSE
└─ README.md

File names may include version tags (e.g. v1, v2) to indicate mechanical revisions.

---

Supported Hardware

• Lichee‑Jack main board
• LicheeRV Nano SoC board
• External board (Ext‑Board)
• Internal Li‑Po battery
• Mode switch (SP3T)
• USB‑C connector
• Status LEDs & light pipes (if applicable)

All cut‑outs and tolerances are designed specifically for the Lichee‑Jack hardware stack.

---

Printing Recommendations

These are general guidelines. Fine‑tuning may be required depending on your printer.

• Material: PLA (easy) / PETG (recommended for durability)
• Nozzle: 0.4 mm
• Layer height: 0.2 mm
• Infill: 15–25% (Gyroid or Grid)
• Supports: Not required (unless stated otherwise per part)
• Orientation: Print shells flat on the build plate

For exact per‑part settings, see the Wiki page linked above.

---

Assembly

Assembly instructions, screw sizes, and wiring guidance are maintained in the Wiki:

https://kaliassistant.github.io/Lichee-Jack-wiki/docs/hardware/2_3dp

The documentation includes:

• Exploded view diagrams
• Assembly order
• Battery placement notes
• Ext‑board alignment tips

---

Customization

You are encouraged to:

• Modify the STL files for your own hardware variants
• Add logos or labels
• Adjust tolerances for your printer

If you publish remixes, please credit the original project and keep the same license.

---

License

This project is licensed under:

Creative Commons Attribution‑ShareAlike 4.0 International (CC BY‑SA 4.0)

You are free to:

• Share — copy and redistribute the material
• Adapt — remix, transform, and build upon the material

Under the following terms:

• Attribution — You must give appropriate credit
• ShareAlike — Derivatives must use the same license

Full license text: https://creativecommons.org/licenses/by-sa/4.0/

---

Related Projects

• Lichee‑Jack (main project)
• Lichee‑Jack Wiki
• Lichee‑Jack Utils

---

Disclaimer

This is an open‑source hardware project intended for educational and research purposes only. The authors are not responsible for misuse, damage, or regulatory issues arising from the use of these designs.