CQP Tool kit

The system provides various components for integrating QKD into a security system. It's written in C++11 but uses GRPC interfaces so can be integrated with lots of different languages.

Quick Start

To run the software natively, ether:

download and install the Ubuntu deb packages or
clone the source, ensuring submodules are updated and build locally

To clone the source including submodules:

git clone --recurse-submodules https://github.com/Open-QKD-Network/cqptoolkit.git

If you cloned without using --recurse-submodules, submodules can be updated by running git submodule update --init from within the source folder.

sudo apt install pkg-config ca-certificates file build-essential cmake ninja-build libusb-1.0-0-dev libcurl4-openssl-dev \
	libcrypto++-dev libcap-dev uuid-dev libssl-dev libsqlite3-dev libprotobuf-dev libgrpc++-dev \
	libssl-dev protobuf-compiler protobuf-compiler-grpc checkinstall 
mkdir build-cqptoolkit
cd build-cqptoolkit
cmake -G Ninja ../cqptoolkit && ninja

If the binaries have been installed, omit the paths to the commands from the instructions. To run two sites each with a QKD device from the build folder, first start site "A" by starting a site agent and connecting an Alice "dummy driver" to it:

./src/Tools/SiteAgentRunner/SiteAgentRunner -p 8000 &
./src/Drivers/DummyQKDDriver/DummyQKDDriver -r localhost:8000 -a

./src/Tools/SiteAgentRunner/SiteAgentRunner -p 8001 &
./src/Drivers/DummyQKDDriver/DummyQKDDriver -r localhost:8001 -b

This will not start producing key immediately as this system is designed to be controlled by a management system, the connection needs to be established. Verify the list of available devices with:

./src/Tools/SiteAgentCtl/SiteAgentCtl -d -c localhost:8000

should produce something similar to

{
 "url": "<hostname>:8000",
 "devices": [
  {
   "config": {
    "id": "dummyqkd__0__16_alice",
    "kind": "dummyqkd"
   },
   "controlAddress": "<hostname>:34219"
  }
 ]
}

and port 9001 should produce something similar to

{
 "url": "<hostname>:8001",
 "devices": [
  {
   "config": {
    "id": "dummyqkd__0__16_bob",
    "side": "Bob",
    "kind": "dummyqkd"
   },
   "controlAddress": "<hostname>:38367"
  }
 ]
}

The connection can now be made by calling:

./src/Tools/SiteAgentCtl/SiteAgentCtl -c localhost:8000 -j localhost:8001

This will create a single hop from one site to the next, more complex routes can be defined by using the -a option with a JSON string specifying the path.

After a few seconds there should be key available which can be tested by requesting a key.

NOTE: The -k parameter must be the url shown in the details of the second site, not "localhost:9001"

./src/Tools/SiteAgentCtl/SiteAgentCtl -c localhost:8000 -k `hostname`:8001

The link can be stopped with the unjoin command:

./src/Tools/SiteAgentCtl/SiteAgentCtl -c localhost:8000 -u localhost:8001

Not that key is still available even though generation has stopped, as long as the site agents are running. It can be requested with the same key request command above.

Encryption example

Launch the site agents and drivers as above and start the key exchange.

Start one side of the "VPN" on the bob/far side which will listen on port 9010 and connect to Bob's key store:

./src/Tools/QTunnelServer/QTunnelServer -p 9010 --keystore-url=`hostname`:8001

Now start the Alice side of the VPN, defining the tunnel to create. Two ports will be opened, one for each side on 9000 and 9001, anything entering these ports will be encrypted, transfered to the other side, decrypted and produced on the other port.

./src/Tools/QTunnelServer/QTunnelServer --keystore-url=`hostname`:8000 --remote=localhost:9010 --start-node=tcpsrv://0.0.0.0:9000 --end-node=tcpsrv://0.0.0.0:9001

Anything which uses tcp communications can then use this port, netcat is a simple program which will send data over the ports, start one on one side:

nc localhost 9000

and one on the other:

nc localhost 9001

Anything typed into one side will appear on the other when enter is pressed. Inspecting the packets travelling through ports 9000 and 9001 with a tool such as wireshark will show the data being encrypted and the key ID used.

Other forms of connection can be created, instead of tcpserv:

Progress

Planed and completed features

It is hoped that this project can prove useful for both scientific research work and large projects. More details on the project can be found in this paper.

To contribute to this project please see the Contribution file.

Installation

The system currently works on Linux - Windows is planned for the future.

Docker image

There is a ready to run docker image in the gitlab registry. You can run with sudo docker run -it --rm registry.gitlab.com/qcomms/cqptoolkit/runtime. Add a command on the end to run something directly, for example to run a simulation of the QKD key generation with QKDSim:

sudo docker run -it --rm registry.gitlab.com/qcomms/cqptoolkit/runtime AlignmentTests

Ubuntu 18.04+

You can install binary packages from Gitlab. Extract the zip file and install the tools with dpkg, it will complain about missing dependencies but don't worry, the second line will fix them.

sudo dpkg -i setup/*.deb build/gcc/CQP-*-Linux-{Algorithms,Networking,CQPToolkit,KeyManagement,QKDInterfaces,CQPUI,Simulate,Tools,UI,Drivers,IDQDevices}.deb
sudo apt install -fy

To install the development files (headers and static libraries) run sudo dpkg -i build/gcc/CQP-*-Linux-*-dev.deb ; sudo apt install -fy instead.

From source

Building from source requires that you install dependencies listed in the setup/setupbuild.sh, currently it works for Ubuntu and Arch Linux. You can build inside a docker container which already has all the dependencies installed with:

sudo docker run -it registry.gitlab.com/qcomms/cqptoolkit/buildenv

Clone the source from gitlab with git and build with CMake and gnu make: The --recurse-submodules adds the optional extras - access to some of these is restricted to UoB and it's partners, the build will work without them.

git clone --recurse-submodules https://gitlab.com/QComms/cqptoolkit.git

If you want to get all submodules, and have the appropreate logins run:

git submodule update --checkout

mkdir cqptoolkit-build
cd cqptoolkit-build
cmake ../cqptoolkit && nice make -s -j
# this can be installed with
sudo make install

The build uses CMake to produce makefiles/solutions/etc for many different platforms and is invoked from an empty build folder which will contain all the output files. Debug builds with produce packages post fixed with a "D". The build can be controlled by passing options to cmake, Eg -DBUILD_TESTING=OFF. Run cmake with the -LH options to list available switches.

To make changes and develop the library it's recommended to install QT Creator and open the project by selecting the CMakeLists.txt file. It is advisable to use parallel builds by going to Projects->Build Steps-> Details and adding -j<number> to the tool parameters, see so. Once built the files, by default, are at the same level as the project folder called build-<project name>-<platform>-<target>.

Note about protobuf + QT on Ubuntu The library qt5-gtk-platformtheme is linked against an old version of protobuf which will prevent our QT programs from running. This optional dependency can be removed with apt-get remove qt5-gtk-platformtheme

Exploring the Library

@startuml
    title Applicaiton Overview

    component "QKD Device Drivers" as drv
    interface IDevice as idev
    drv - idev

    component "Device contol and\n Key storage" as sa
    interface IKey as ikey
    sa - ikey
    sa ..> idev

package "Key consumers" as kc {
    component "Custom VPN" as tun
    component "Custom\nWeb Server" as nginx
    component "HSM bridge" as hsm
}
tun ..> ikey
nginx ..> ikey
hsm ..> ikey

package Utilities {
    component "Config/Control GUI" as gui
    component "Simulators/Testing" as sim
    component "Data extraction" as stats

    gui -[hidden]down- sim
    sim -[hidden]down- stats
}
@enduml

Below is a flow chart to help find the area relevant to you as the project covers many different aspects of QKD and key management - contributors are welcome to drive this project to be more specialised. QKD requires some form of non-cloning communication, usually by using single photons over a fibre optic cable. They can operate point-to-point or as one-to-many but they inherently have a physical location (where the fibre terminates) - they cannot be virtualised! The point at which the photon is transmitted or detected is the boundary of the secure system - almost like the firewall to a network. Once the in-divisible photons have been turned into a string of bits to form a symmetric key the standard rules of computer security like authentication, access control, etc, apply. The difference is that once those keys have been produced, each of the QKD devices have a number which no one else knows proven by science.

The nature of this "firewall" effect is that the systems controlling the QKD devices need to be secure and considered trusted - also called "trusted node" - where and how you draw the line can range from armed guards to just locking the server room door.

If you can't see the diagram below, please go to the online documentation, it can also be built by the doc target.

@startuml
title Where to start \n

skinparam activity {
  StartColor #EF476F
  BarColor #FFD166
  EndColor #EF476F
  BackgroundColor #06D6A0
  BorderColor #118AB2
}

start
if (Do you have a QKD Device?) then (Yes)
    if (Does your QKD device have a driver?) then (No)
        :You will need to [[./index.html#CreatingDrivers create a driver]] which implements the
        <b>IDriver</b> and <b>IReporting</b> interfaces.;
        if (Use the library?) then (Yes)
            :See the [[./index.html#RunningDummyQKDDriver DummyQKDDriver]] for an example.;
        else (No)
        endif
    else (Yes)
    endif
else (No)
    :Check out how to run the
    [[./index.html#RunningDummyQKDDriver DummyQKDDriver]];
endif

if (Do you want keys for multiple
locations in a network?) then (Yes: Sites)
    :[[./index.html#Registering Register your driver]] with the site agent
    using the <b>ISiteAgent</b> Interface
    Keys can be obtained by using the [[./index.html#IKeyInterface IKey]] interface;

    if(Do you want keys to be stored/persist between restarts?) then (Yes)
        if (Do the keys need to be secured?) then (Yes)
            :Use the [[./index.html#HSMs HSM storage]] options;
            if (Is your HSM supported?) then (No)
                :Create a driver that implements
                the <b>IBackingStore</b> interface.
                Add the driver creation to the
                <b>BackingStoreFactory</b>;
            else (Yes)
            endif
        else (No)
            : When running SiteAgentRunner,
            use the option ""-b file"" or
            set ""backingStoreUrl"" to
            ""file:///filename.db"";
        endif
    else (No)
    endif
else (No: Point-to-Point)
    :Use the [[./index.html#IDeviceInterface IDevice interface]] to
    control the driver for your system.
    As keys become available they will
    be sent via the call to <b>WaitForSession</b>.;
endif

if (Do you want to use the key for anything?) then (Yes)
    :See the [[./index.html#Encryption encryption section]]
    for an example of using the [[./index.html#IKeyInterface IKey interface]];
else (No)
endif
stop

@enduml

Running DummyQKDDriver

As with most programs, passing -h to it will display the options available. The DummyQKDDriver runs a standard set of post processing steps on simulated photon detections using the cqp::DummyQKD class. There needs to be two instances of the program running, one for Alice and one for Bob.

Run Bob first on port 8000 by calling:

DummyQKDDriver -b -k 0.0.0.0:8000

Now run Alice, telling her to connect to Bob and start exchanging key (in manual mode):

DummyQKDDriver -a -m localhost:8000

If it worked you'll get a flood of error message like this: ERROR: OnKeyGeneration No listener for generated key. This is because while running the system like this is nice to see it doing something, it's not very useful, there's nowhere to put the key that is generated. the drivers are designed to be used by something. The project has a system for managing the keys called Site Agents or you can talk to the drivers directly using the IDevice interface

Site Agents

Site agents can be run with the SiteAgentRunner, we can run two sites with:

SiteAgentRunner -p 9000

and:

SiteAgentRunner -p 9001

Now we can attach our DummyQKDDriver's, one to each site:

DummyQKDDriver -a -r localhost:9000 # run as Alice, register with site agent

and:

DummyQKDDriver -b -r localhost:9001 # run as Bob, register with site agent

We don't care which ports the devices use - the sites will work it out themselves.

Nothing will happen yet as the site agents don't know what to do with these devices. We can instruct them to start making key by sending the cqp::ISiteAgent::StartNode command:

SiteAgentCtl -c localhost:9000 -b '{"hops":[{"first":{"site":"localhost:9000","deviceId":"dummyqkd__0__16_alice"},"second":{"site":"localhost:9001","deviceId":"dummyqkd__0__16_bob"}}]}'

This is a long winded way of saying connect A to B but it is very powerful, allowing multiple hops to be specified to produce an end-to-end secure key from a chain of devices. This JSON string can be specified in the site agents "staticHops" config field to let this happen automatically once all the devices are available. The link can then be stopped with:

SiteAgentCtl -c localhost:9000 -e '{"hops":[{"first":{"site":"localhost:9000","deviceId":"dummyqkd__0__16_alice"},"second":{"site":"localhost:9001","deviceId":"dummyqkd__0__16_bob"}}]}'

Note the -e instead of -b to end the link instead of beginning it.

More complex setups can be achieved by implementing the cqp::remote::INetworkManager interface yourself to issue the commands. Feedback from the devices comes over the cqp::remote::IReporting interface on the same socket so that you can react to changes in the system. Here you can see how to extract things from the reporting interface with the StatsDump tool.

Creating Drivers

The driver application is a bridge between the internal device interfaces (cqp::IQKDDevice) and the external cqp::remote::IDevice interface. The cqp::RemoteQKDDevice class handles most of the work for you, the application must handle the configuration and creation of the device.

The real work is in creating a driver to setup the device and read the key. If your device just produces raw detections then you will need to configure a processing pipeline like cqp::DummyQKD or cqp::PhotonDetectorMk1 and cqp::LEDAliceMk1. If your device generates ready to use key like the cqp::Clavis3Device you need to read it and publish it over the cqp::IKeyCallback interface (use cqp::KeyPublisher).

Both these approaches require a form of session management, provided by cqp::session::SessionController and cqp::session::AliceSessionController, these implement the cqp::ISessionController and cqp::remote::ISession interface and are used by cqp::RemoteQKDDevice to start and stop the device and it's peer. These are usually all that's needed but in some situations they need to be specialised to cope with device requirements

@startuml Readme_Drivers
title Anatomy of a driver
    package Application {
        namespace cqp #DDDDDD {
            class RemoteQKD
            interface IQKDDevice {
                GetSessionController()
            }
            class "SessionController" as session
            interface "IDetector::Service" as detServ {
                StartDetecting()
                StopDetecting()
            }
            class "Provider<IDetectionEventCallback>" as provider {
                Attach()
                Dettach()
                Emit()
            }

            RemoteQKD .r.> IQKDDevice : uses
            IQKDDevice -r[hidden]-> session
        }
        class Main {
            main()
        }
        class MyDriver
        class Detector

        MyDriver .u.|> cqp.IQKDDevice
        MyDriver o-u-> cqp.session
        Detector .u.|> cqp.detServ
        Detector -u-|> cqp.provider

        Main o-> MyDriver
        MyDriver o-> Detector
        Main o-u-> cqp.RemoteQKD

        note bottom of MyDriver
            In this case the driver is a simple detector
            which produces detection. Post processing detail not shown.
            MyDriver pull together all the parts to run the driver.
        end note

        note bottom of Detector
            The detector controls the device
            and outputs the data using the Provider
        end note
    }
@enduml

Registering a driver

At the time of writing, all the drivers can be registered with a site agent by using the -r switch. This causes the cqp::RemoteQKDDevice to call cqp::remote::ISiteAgent::RegisterDevice on the cqp::SiteAgent, it will then use the cqp::remote::ISession interface to start/stop the device.

IDevice Interface

This interface allows a more direct access to the device than going through the site agents. Key generated by the device are immediately fed back to the caller. First call cqp::remote::IDevice::WaitForSession, then cqp::remote::IDevice::RunSession. Call cqp::remote::IDevice::EndSession to stop generating key.

HSMs

HSMs are storage devices which are physically secure digital vaults. There is a standard interface for them called PKCS#11. Each manufacturer has their own interfaces and support for PKCS#11 is sketchy, however there is a software implementation which we use as a reference called SoftHSM2. The cqp::keygen::HSMStore class proves an implementation that links the cqp::SiteAgent with the cqp::IBackingStore interface.

IKey Interface

Sites provide keys more many endpoints (the available key stores can be retrieved by calling cqp::remote::IKey::GetKeyStores), they can be requested by using the cqp::remote::IKey interface. Once a new key has been requested, the other side can only retrieve it as an existing key - this prevents clashing and misuse of keys.

Encryption

More details on specific implementations can be found in:

Tunnels

Reporting

Changes to values in the system are published externally via the cqp::remote::IReporting interface and internally with the cqp::stats::Stat class. You can register for all stats by calling cqp::remote::IReporting::GetStatistics with the cqp::remote::ReportingFilter::listIsExclude field set to true or specific filters can be specified.

Processing Pipelines

Standard BB84 QKD protocol requires post processing steps to turn the raw detections into usable keys.

Alignment Finding the start and end of the real transmission.
- Adjusting for timing differences/drift etc.
- Compensating for phase or other differences between the transmitter and receiver, etc
Sifting Throwing away invalid detections
Error Correction Correcting incorrect detections - without divulging the values
Privacy amplification Hashing the key to make any divulged bits useless

An example of a processing pipeline can be seen in cqp::DummyQKD::ProcessingChain.

Building

The builds are managed by the gitlab continuous integration system defined in the .gitlab-ci.yml file.

The docker images can by built manually by running setup/makeDocker.sh.

Windows

This is work in progress. This setup has be tested on Window 10 and Windows Server 2016 with Visual studio 15 (2016). The following configurations are supported

OS	VS 2017	QT Creator	Codeblocks
Linux		gcc	gcc
Windows	MSVC	MSVC / MSYS2	MSYS2-Mingw

IDE

Visual Studio 2016
- Run the InstallVcPkg.bat script once to install vcpkg in C:\vcpkg
- Run the SetupMSBuild.bat script
- Open the cqp.sln solution
- Select Build->Solution
QT Creator for windows
- QT Creator can use ether the native Microsoft compiler or MSYS2. Install MSYS2 separately, you don't need to install the minGW compiler which comes with the QTCreator installer. Or install the Windows 10 SDK
- Under the component menu, select the components for the compiler your using. E.g msvc2017
- Using "Open Project", select the CMakeLists.txt file at the base of the source tree.
MSYS2 and Codeblocks
- Install the MSYS2 package.
- Run the installMSYS2Dependencies.bat script
- Under Settings->Debugger -> "Create config" called "MSYS2 GDB"
  - Change the debugger to point to gdb.exe (eg. C:\msys64\mingw64\bin\gdb.exe)
- Under Settings->Compiler
  - Copy the GCC compiler settings, call it "GCC - Old"
  - Change the Toolchain installation directory to MSYS2's mingw64 install location (eg. C:\msys64\ mingw64)
  - In each of the fields under "Program Files" except the "make" program, remove the mingw32- prefix.
  - In the make field, add the -j switch to allow multi core building: mingw32-make.exe -j
  - Select the previously created "MSYS2 GDB" debugger
  - If you prefer readable output from the compiler, "Other Settings"->"Compiler Logging" to "Task description"
- In the CodeBlock build directory (\build\CodeBlocks)
- Run the SetupCodeBlocks-MSYS2.bat file
- Open the "CQP.cbp" CodeBlocks project file.

If your project file has deep folder structure (this is a bug), it can be improved by right clicking on the workspace and:

Unchecking "Display folders as on disk"
Checking "Hide Folder Name"

Citing this software

@Manual{,
title = {CQPToolkit: A QKD toolkit library},
author = {{Richard Collins, University of Bristol, UK}},
organization = {University of Bristol},
address = {Bristol, UK},
year = 2018,
url = {https://gitlab.com/QComms}
}

Name		Name	Last commit message	Last commit date
Latest commit History 457 Commits
CMakeModules		CMakeModules
build		build
demo		demo
external		external
images		images
packaging		packaging
setup		setup
src		src
.gitignore		.gitignore
.gitlab-ci.yml		.gitlab-ci.yml
.gitmodules		.gitmodules
CMakeLists.txt		CMakeLists.txt
Coding.md		Coding.md
Contribution.md		Contribution.md
DemoHowto.md		DemoHowto.md
Doxyfile.in		Doxyfile.in
FAQ.md		FAQ.md
GtkToCpp.xslt		GtkToCpp.xslt
LICENSE		LICENSE
NOTICE.md		NOTICE.md
README.md		README.md
SiteAgentA.json		SiteAgentA.json
SiteAgentB.json		SiteAgentB.json
SiteAgentC.json		SiteAgentC.json
StartCQPImage.sh		StartCQPImage.sh
TLS.md		TLS.md
ToolkitStack.eps		ToolkitStack.eps
ToolkitStack.svg		ToolkitStack.svg
TunnelControllerA.json		TunnelControllerA.json
TunnelControllerB.json		TunnelControllerB.json
Tunnels.md		Tunnels.md
Walkthrough.md		Walkthrough.md
general.astylerc		general.astylerc
header.template		header.template
makepaper.sh		makepaper.sh
paper.bib		paper.bib
paper.md		paper.md
proto2cpp.py		proto2cpp.py
setup.py		setup.py

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

CQP Tool kit

Quick Start

Encryption example

Progress

Installation

Docker image

Ubuntu 18.04+

From source

Exploring the Library

Running DummyQKDDriver

Site Agents

Creating Drivers

Registering a driver

IDevice Interface

HSMs

IKey Interface

Encryption

Reporting

Processing Pipelines

Building

Windows

IDE

Citing this software

Further Reading

About

Releases

Packages

Languages

License

Open-QKD-Network/cqptoolkit

Folders and files

Latest commit

History

Repository files navigation

CQP Tool kit

Quick Start

Encryption example

Progress

Installation

Docker image

Ubuntu 18.04+

From source

Exploring the Library

Running DummyQKDDriver

Site Agents

Creating Drivers

Registering a driver

IDevice Interface

HSMs

IKey Interface

Encryption

Reporting

Processing Pipelines

Building

Windows

IDE

Citing this software

Further Reading

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages