NodOn

This app adds support for NodOn Z-Wave devices in Homey.

Supported Devices:

• Octan Remote - Button Sequence and Scene triggers for all 4 buttons.
• Soft Remote - Button Sequence and Scene triggers for all 4 buttons.
• Wall Switch - Button Sequence and Scene triggers for both switches (in both directions).
• Smart Plug.
• Micro Smart Plug.

Scene Triggers:

• Single Press
• Double Press
• Long Press (1x / 5x per second)
• Long Press Released

Supported Languages:

• English
• Dutch (Nederlands)

Notes:

Battery Devices, saving settings: For battery devices it's best to press a button 2 seconds Before pressing the save button.
This will make it 100% sure the device takes the new settings (immediately).

Micro Smart Plug, indicator: The LED indicator on the Micro Smart Plug goes on again when power was lost.
Unfortunately I can not synchronize this in the settings automatically.
It will be resend to the device on app (re)start, or you can do it manually in the settings.

Sequences: Sequence's buttons can be separated by a comma ( , ) or a semicolon ( ; ).
The buttons/switches themselves are in number, ranging from 1 to 4, going from left to right, top to bottom respectively.

Change Log:

3.0.0:

• Rewrite to SDKv3 for Homey v5:
• Additional changes:
  • Changed the "hold" trigger to every second, instead of 5 times a second to keep Homey from disabling that flow card immediately
  • Updated all icons to be more clear
  • Added a Reset Meter maintenance action
  • Updated all images to make them more consistent

2.1.0:

• Add battery types, for Homey v3's Energy

2.0.3:

• [Smart Plug] fix the app crashing when triggering on "power lost".
• Fix all icons not showing in the app.
• Update meshdriver to v1.3.4

2.0.2:

• Visual improvements for Homey V2 (still need to do icons)
• Using the new Homey composer now
• Update meshdriver to v1.2.29

Micro Smart Plug:

• Fix a few settings their range
• Removed the deprecated reset meter card

2.0.1: Octan Remote, Soft Remote and Wall Switch:

• Add (software based) sequence support.
• Add 1x trigger for the "held down" scene (5x per second was already there).

2.0.0:

• Rewrite to SDKv2

1.1.1:

• Add LED indicator setting (Micro) Smart Plug
• Fix power notifications Smart Plug (From Homey firmware v1.3.x and higher)
• Fix association group settings (Micro) Smart Plug

1.1.0:

• Add support Micro Smart Plug (both E-type and Schuko plugs)
• Add support Smart Plug (both E-type and Schuko plugs)
• Add settings for using the remotes and wall switch other then with Scenes
• Add flow card to trigger when in these mode(s)
  • Node ID of homey needs to be put into the corresponding association group(s) for this to work. (Only necessary on devices added before app v1.1.0)
• Add the Battery Alarm capability to all battery devices (optional, re-pair needed)
• Fix settings button disabled: Removed wake-up interval (Only "0" is possible)
• Update icon Octan Remote
• Update Z-Wave driver to 1.1.8

1.0.4 & 1.0.5:

• Fix an issue that creeped in when updating
• Also added battery trigger cards (re-include needed for this)

1.0.3:

• Make app ES6 (ESLint) Compliant
• Update Z-wave driver to latest (1.1.2)
• Add wake-up interval (86400 seconds, once a day)
• Added the funtion to Get battery level on wake-up
• Added Association Group hints

1.0.2:

• Update z-wave driver to latest (1.0.2)

1.0.1:

• add support: Wall Switch
• Add mobile cards for showing battery level