updates to Synaccess netBooter support

ipApp/Db/Synaccess_netBooter.proto

@@ -35,6 +35,18 @@ get_status5
 
   out "$A5";
 
+  @mismatch {
+      in
+        "%*1c" # sometimes it sends a <00> ?
+        "$A5\r\n"
+        "%*4c"
+        "%(\$1\$2status5.RVAL)1b"
+        "%(\$1\$2status4.RVAL)1b"
+        "%(\$1\$2status3.RVAL)1b"
+        "%(\$1\$2status2.RVAL)1b"
+        "%(\$1\$2status1.RVAL)1b";
+  }
+
   in 
     "$A5\r\n"   # from echoed input
     "%*4c"      # ignore return status ($A0)
@@ -43,6 +55,7 @@ get_status5
     "%(\$1\$2status3.RVAL)1b"       
     "%(\$1\$2status2.RVAL)1b"
     "%(\$1\$2status1.RVAL)1b";
+
 }
 
 

ipApp/Db/Synaccess_np05b.db

@@ -1,3 +1,9 @@
+# Used to display a desciption of the device
+record(stringout, "$(P)$(R)device")
+{
+    field (DESC, "$(R)DEVICE_NAME")
+}
+
 ##########################################
 # $(P)$(R)setX
 # Sets outlet X On (VAL=1) or Off (VAL=0)
@@ -116,6 +122,13 @@ record (bo, "$(P)$(R)alloff")
 # Indicates the status of each outlet
 ######################################
 
+# Check the status of the outlets every 10 seconds
+record (bo, "$(P)$(R)periodic_status")
+{
+   field (SCAN, "10 second")
+   field (FLNK,  "$(P)$(R)get_status.PROC")
+}
+
 record (stringin, "$(P)$(R)get_status")
 {
   field (DTYP, "stream")
@@ -153,3 +166,76 @@ record (bi, "$(P)$(R)status5")
    field (INP, 0)
    field (SCAN, "Passive")
 }
+
+######################################
+# $(P)$(R)userCalcOutX
+# calcout records for each port
+#
+# $(P)userCalcOutX:$(R)EnableCalc
+# enable/disble record for each calcout
+######################################
+
+record(bo, "$(P)userCalcOut1:$(R)EnableCalc")
+{
+    field (VAL, 1)
+    field (OUT, "$(P)$(R)userCalcOut1.DISA $(P)userCalcOut1:$(R)EnableCalc.RVAL")
+    field (PINI, "YES")
+}
+
+record(calcout, "$(P)$(R)userCalcOut1")
+{
+    field (SCAN, "Passive")
+    field (DISV, "0")
+}
+
+record(bo, "$(P)userCalcOut2:$(R)EnableCalc")
+{
+    field (VAL, 1)
+    field (OUT, "$(P)$(R)userCalcOut2.DISA $(P)userCalcOut2:$(R)EnableCalc.RVAL")
+    field (PINI, "YES")
+}
+
+record(calcout, "$(P)$(R)userCalcOut2")
+{
+    field (SCAN, "Passive")
+    field (DISV, "0")
+}
+
+record(bo, "$(P)userCalcOut3:$(R)EnableCalc")
+{
+    field (VAL, 1)
+    field (OUT, "$(P)$(R)userCalcOut3.DISA $(P)userCalcOut3:$(R)EnableCalc.RVAL")
+    field (PINI, "YES")
+}
+
+record(calcout, "$(P)$(R)userCalcOut3")
+{
+    field (SCAN, "Passive")
+    field (DISV, "0")
+}
+
+record(bo, "$(P)userCalcOut4:$(R)EnableCalc")
+{
+    field (VAL, 1)
+    field (OUT, "$(P)$(R)userCalcOut4.DISA $(P)userCalcOut4:$(R)EnableCalc.RVAL")
+    field (PINI, "YES")
+}
+
+record(calcout, "$(P)$(R)userCalcOut4")
+{
+    field (SCAN, "Passive")
+    field (DISV, "0")
+}
+
+record(bo, "$(P)userCalcOut5:$(R)EnableCalc")
+{
+    field (VAL, 1)
+    field (OUT, "$(P)$(R)userCalcOut5.DISA $(P)userCalcOut5:$(R)EnableCalc.RVAL")
+    field (PINI, "YES")
+}
+
+record(calcout, "$(P)$(R)userCalcOut5")
+{
+    field (SCAN, "Passive")
+    field (DISV, "0")
+}