Jetpack Camera App (JCA) is a camera app, focused on features used by app developers, and built entirely with CameraX, Kotlin and Jetpack Compose. It follows Android design and development best practices and it's intended to be a useful reference for developers and OEMs looking to validate their camera feature implementations.
This project uses the gradle build system, and can be imported directly into Android Studio.
Currently, Jetpack Camera App is built using the Android Gradle Plugin 8.4, which is only compatible with Android Studio Jellyfish or newer.
JCA is built with modern android development (MAD) principles in mind, including architecture and testing best practices.
The app is split into multiple modules, with a clear separation between the UI and data layers.
Thorough testing is a key directive of JCA. We use Compose Test and UI Automator to write instrumentation tests that run on-device.
These tests can be run on a connected device via Android Studio, or can be tested on an Android Emulator using built-in Gradle Managed Device tasks. Currently, we include Pixel 2 (API 28) and Pixel 8 (API 34) emulators which can be used to run instrumentation tests with:
$ ./gradlew pixel2Api28StableDebugAndroidTest and
$ ./gradlew pixel8Api34StableDebugAndroidTest
This section provides a detailed overview of the camera app's features, highlighting its capabilities and functionalities. Each feature is described with its purpose, usage, and any relevant considerations to help you understand and utilize the app effectively.
This section outlines the essential features of the camera app that enable you to capture photos and videos with ease. It covers fundamental aspects of camera operation, providing a solid starting point for utilizing the app's capabilities.
The viewfinder provides a real-time preview of the camera's sensor output, accurately displaying the scene with correct scaling and orientation. It functions as a "What You See Is What You Get" ( WYSIWYG) display, showing only the pixels that will be captured in the final image or video, when hardware and processing capabilities allow (see limitations). This ensures that the displayed preview precisely reflects the captured content, allowing for accurate composition and framing.
- This is a core function of the camera app. When the camera app is opened, the viewfinder is active.
- The viewfinder's quality is limited by the screen's resolution and brightness. JCA is built on CameraX, which will limit the viewfinder resolution to 1080p as a tradeoff of performance and quality.
- Due to the computational demands of high-quality video stabilization, the viewfinder may not be strictly WYSIWYG when the video stabilization mode is set to “High Quality”, as the stabilization algorithm applied to the recorded video stream might not be able to be replicated in real-time for the viewfinder preview.
Sets the proportions of the preview and the captured image or video.
- Open the camera app settings and select Set Aspect Ratio
- Or open the quick dropdown in the preview screen and look for the aspect ratio icon
- Select/toggle among the desired aspect ratios (e.g., 16:9, 4:3, 1:1).
Captures a still image from the camera. When the capture button is pressed, the camera captures a still image that accurately represents the scene currently displayed in the viewfinder. The captured image will incorporate any applicable image processing settings, such as Ultra HDR, based on the user's selected mode.
- Open the camera app.
- Tap the shutter button (white circle).
- The resulting image is saved to the device's media store, or, when the app is launched via the
ACTION_IMAGE_CAPTUREorINTENT_ACTION_STILL_IMAGE_CAMERAintents, to the URI(s) provided.
- The ability to capture an image may be limited by available device storage.
- Image capture is disabled when the app is launched with the
ACTION_VIDEO_CAPTUREintent. - Image capture is also disabled in concurrent camera mode and when HDR is enabled and the device does not support Ultra HDR image capture.
Allows the user to manually select the focus point of the camera.
- Open the camera app.
- Tap on the desired area of the viewfinder.
- The camera will adjust the focus to the tapped area.
- May struggle in low-light conditions.
- Can be affected by movement of the subject or camera.
- Some devices may have limitations on how close or far the focus can be adjusted.
This feature allows users to instantly switch between the device's primary front-facing and rear-facing cameras.
There are several ways to flip camera lenses:
- Open the camera app.
- Tap the flip camera button.
Alternatively,
- Open the camera app.
- Double tap on the viewfinder.
Alternatively,
- Open the camera app.
- Open quick settings by tapping the downward facing arrow at the top of the screen.
- Tap the flip camera button which is displaying the currently visible camera.
- If the device does not have a front or a rear camera, the flip camera button will be disabled.
This feature enables users to digitally or optically zoom in and out on the scene. On devices
equipped with Camera2's LOGICAL_MULTI_CAMERA capability, the zoom functionality may automatically
transition between available lenses, such as the main, telephoto, and wide-angle lenses, to provide
seamless zoom transitions across the device's optical range.
- Open the camera app.
- Use pinch-to-zoom gestures. Text indicating the current magnification factor will appear above
the capture button. If the device supports the
LOGICAL_MULTI_CAMERAcapability, switching between lenses will occur automatically as zoom increases or decreases.
- Digital zoom may reduce image quality.
- In Dual Concurrent Camera mode, only the primary lens’ zoom can be changed. The secondary lens will not react to pinch-to-zoom gestures.
This feature provides various options for illuminating the scene during capture of images and video, including:
- On: Activates the device's built-in flash for a burst of light during image capture, and constant illumination during video capture.
- Auto: Automatically determines the need for illumination based on ambient light conditions for image capture.
- Low-Light Boost: Utilizes Camera2's
ON_LOW_LIGHT_BOOST_BRIGHTNESS_PRIORITYauto-exposure ( AE) mode to enhance brightness in low-light conditions, if the device supports it. - Off: Disables all scene illumination.
- Open the camera app.
- Tap the flash icon to toggle between scene illumination modes (on, off, auto, LLB).
- Take a photo or video.
Alternatively,
- Open the camera app.
- Open quick settings by tapping the downward facing arrow at the top of the screen.
- Tap the flash icon to toggle between scene illumination modes.
- Take a photo or video.
- Auto mode relies solely on ambient scene lighting for image capture and behaves as "On" for video capture.
- Dedicated front-facing flash units, if present, are not utilized; front-facing cameras exclusively use screen flash for illumination.
- Low-light boost may not be applied to image capture when the app is in multi-stream mode. To guarantee low-light boost application in both image and video capture, utilize single-stream mode.
This section explores the camera app's comprehensive video recording capabilities, providing tools and settings to enhance your video capture experience. It covers various aspects of video functionality, from basic recording to advanced controls and customization.
Records video that, in most cases (see limitations), represents the scene visible in the viewfinder. When HDR mode is enabled, the captured video can record 10-bit HDR content.
- Open the camera app.
- Press and hold the shutter button (white circle) until video recording starts, indicated by a filled red circle in the shutter button and an incrementing duration timer above the shutter button.
- Release the shutter button to finish recording. The resulting video is saved to the device's
media store, or, when the app is launched via the
ACTION_VIDEO_CAPTUREintent, to the URI provided.
- May be limited by device storage.
- Due to the computational demands of high-quality video stabilization, the viewfinder may not be strictly WYSIWYG when the video stabilization mode is set to “High Quality”. The stabilization algorithm applied to the recorded video stream might not be able to be replicated in real-time for the viewfinder preview.
- Video capture is disabled when the app is launched with the
ACTION_IMAGE_CAPTUREorINTENT_ACTION_STILL_IMAGE_CAMERAintents. - Video capture is also disabled when HDR is enabled and the device does not support 10-bit HDR video capture.
Temporarily stops and restarts video recording.
- While recording video, tap the pause button.
- Tap the resume button to continue recording.
- May not be available on all devices or in all recording modes.
Sets a maximum length for video recordings.
- Open the camera app settings.
- Select Set Maximum Video Duration
- Choose the desired duration limit.
Sets the resolution and compression level of video recordings.
- Open the camera app settings.
- Select Set Video Quality.
- Choose the desired video quality (e.g., 720p, 1080p, 4K).
- Available quality settings depend on camera hardware.
- Ultra High Definition may only be available under video/image-only mode
Controls the audio recording level and processing.
- Start video recording by holding down the capture button
- Audio visualization appears to the right of the button while recording
Sets the number of frames recorded per second in a video.
- Open the camera app settings.
- Select Set Frame Rate
- Select the desired frame rate (e.g., 30fps, 60fps).
- Available frame rates depend on camera hardware.
This feature offers multiple stabilization modes to enhance video smoothness and clarity. The following stabilization modes are offered as options by JCA
- Auto: Automatically enables stabilization based on the device's capabilities and current recording settings.
- On: Activates stabilization for both the preview and recorded video streams, providing a smooth viewing experience during capture and playback.
- High Quality: Applies a high-quality stabilization algorithm to the recorded video stream, potentially resulting in superior stabilization. However, the preview stream may not be stabilized in real-time due to computational limitations.
- Optical: Utilizes the device's optical image stabilization (OIS) hardware to stabilize all streams.
- Off: Disables all stabilization features.
- Open the camera app settings from the settings icon in the upper left corner.
- Click the “Set Video Stabilization” setting if it is selectable. If it is not selectable, the current lens does not support any video stabilization.
- Choose the desired stabilization mode and press “close”. The stabilization mode will be applied when returning to the camera viewfinder. This selected stabilization mode will be persisted if the app is closed, and will be applied the next time the app is opened.
- Some stabilization modes, such as “On” and “High Quality”, may crop the video and/or viewfinder slightly.
- Each lens may support different stabilization modes. Supported stabilization modes will be selectable in settings, and unsupported stabilization modes will not be selectable. Swapping the default lens in settings may change the available stabilization modes.
- Some stabilization modes may not support every frame rate. To ensure best support for most stabilization modes, select “Auto” frame rate.
- If a stabilization mode is selected, and the camera switches settings via quick settings or by flipping cameras, the stabilization may be disabled temporarily. This is indicated by a greyed out stabilization icon at the top of the viewfinder screen. When settings and/or lens allow the stabilization mode, it will be re-enabled.
Switches between front and rear cameras during video recording.
- While recording video, tap the flip camera button.
- Uses Persistent Recording API which is experimental, and may not always function as expected
- May be buggy with pause/resume. This is being addressed.
- Does not work with concurrent cameras, stabilization, or single stream.
This section delves into the advanced capabilities of the camera app, unlocking a new level of control and creativity for experienced users. It explores features that extend beyond basic camera operation, offering specialized functionalities and enhanced capture modes.
During image capture with a front-facing camera, this feature illuminates the subject by displaying a solid, bright overlay on the device's screen and maximizing screen brightness.
- Open the camera app.
- Ensure a front-facing camera is selected by tapping on the “flip camera” button.
- Tap the flash icon to toggle between scene illumination mode. Screen flash will be selected if the “On” or “Auto” flash mode is selected.
- Take a photo.
See the “Scene Illumination / Flash” feature for other methods of enabling screen flash.
- Screen flash will only be used for front-facing cameras.
- Screen flash is currently limited to image capture only. There will be no additional illumination for video capture.
- In "Auto" mode, screen flash behaves equivalently to the "On" mode, regardless of ambient scene lighting.
This feature enables simultaneous video capture from both the front and rear-facing cameras. It is
built upon the CameraX concurrent camera APIs and is only available on devices that support the
PackageManager.FEATURE_CAMERA_CONCURRENT feature. The interface displays two video streams: a "
primary" stream and a "secondary" stream. The primary stream occupies the majority of the
viewfinder, providing the main view, while the secondary stream is presented in a picture-in-picture
format. The "Flip Camera" feature will swap the roles of the primary and secondary camera streams,
effectively switching which camera provides the main view.
- Open the camera app.
- Open quick settings by tapping the downward facing arrow at the top of the screen.
- Tap the concurrent camera mode button to select the concurrent camera mode. It will display “DUAL” underneath the button when Dual Concurrent Camera mode is enabled, and “SINGLE” for normal single-camera operation.
- Both streams will be visible in the viewfinder. You may optionally record a video of what is visible in the viewfinder. Both streams will be composited in the recorded video.
- Image capture is not supported in dual concurrent camera mode; only video capture is available.
- Single-stream and multi-stream modes are unavailable; both camera streams are composited into a single output stream.
- HDR mode is not supported in dual concurrent camera mode.
- Zoom and tap-to-focus functionality are limited to the primary camera stream. Tapping on the secondary stream will interact with the corresponding area of the primary stream that is occluded by the secondary stream's view.
- Because two cameras are being used concurrently in Dual Concurrent Camera mode, additional power and thermal load should be expected.
This multifaceted feature enhances the camera's ability to capture and display a wider range of colors and brightness levels. It comprises three key components:
- 10-bit HDR Video Capture: Record videos with enhanced color and dynamic range. This
functionality is built upon CameraX's
DynamicRangeAPIs, including the associated APIs within theVideoCaptureclass. 10-bit HDR allows for over a billion color possibilities, resulting in smoother gradients and more realistic color reproduction. High Dynamic Range (HDR) captures a wider range of light and dark tones, preserving detail in both highlights and shadows. - Ultra HDR Image Capture: Capture images with expanded dynamic range by embedding a gain map
within the standard JPEG file. This functionality is dependent on
ImageCapture.OUTPUT_FORMAT_JPEG_ULTRA_HDRbeing an available output format on the device. This gain map stores supplemental luminance data, enabling compatible displays to render a wider range of brightness levels. On non-HDR displays, the image is rendered as a standard SDR JPEG, ensuring backward compatibility. - HDR Viewfinder Preview: When 10-bit HDR video mode is activated, the device's display
dynamically switches to HDR rendering for real-time preview, provided the current display supports
the
ActivityInfo.COLOR_MODE_HDRcolor mode. This enables accurate monitoring of captured HDR video content during recording, leveraging the display's extended dynamic range capabilities.
- Open the camera app.
- Open quick settings by tapping the downward facing arrow at the top of the screen.
- Tap the “HDR” button to select HDR mode, if it is enabled. Tapping again will toggle back to SDR mode.
- Exit quick settings by tapping the upward facing arrow at the top of the screen.
- Toggle between 10-bit HDR video mode and Ultra HDR image capture mode using the toggle switch in the lower right corner. If only one of these modes is available on the device, this switch will be disabled, and tapping it will display a reason for why it is disabled.
- Take a photo or video as normal, depending on which mode is selected.
- Not every device supports HDR mode. Some devices may support only 10-bit HDR video or Ultra HDR, but not both.
- HDR mode supports either image capture or video capture, but not both simultaneously. Users must select their desired capture mode using the mode selector switch.
- HDR mode is not supported when using the dual concurrent camera feature.
- Different lenses on the device may have varying HDR capabilities. Some lenses may support HDR capture, while others may only support SDR capture.
- In HDR mode, single-stream mode is exclusively used for video capture. Image capture is disabled when single-stream mode is enabled.
- The viewfinder utilizes HDR rendering during 10-bit HDR video capture. However, HDR rendering may not be used in Ultra HDR image capture mode.
- During HDR preview, standard dynamic range (SDR) assets, such as the app's user interface, may appear dimmed.
Enhances the brightness of the camera's preview and recorded videos. If the device supports it, this
feature utilizes Camera2's ON_LOW_LIGHT_BOOST_BRIGHTNESS_PRIORITY auto-exposure (AE) mode to
improve brightness in low-light conditions.
- Tap the flash icon to cycle through flash modes.
- The crescent moon icon indicates that LLB is enabled.
- LLB has two states:
- Outlined Crescent Moon: LLB is inactive (the scene isn't dark enough).
- Filled Crescent Moon: LLB is active (the scene is dark enough, and brightness is enhanced).
- To disable LLB, switch to a different flash mode.
- A reduced frame rate can introduce some motion blur.
- It only works on Preview and Video Capture in multi-stream mode.
- Images captured in single-stream mode will still be brightened.
- Not all devices support Low Light Boost. Only lenses with
ON_LOW_LIGHT_BOOST_BRIGHTNESS_PRIORITYas an availableCONTROL_AE_AVAILABLE_MODESsupport LLB. - LLB will override the frame rate setting.
This setting controls whether the camera uses a single stream or multiple streams for preview, video, and image capture.
- Multi-stream mode: Uses separate streams for preview, video recording, and still image capture. The output of each stream may appear slightly different. In general, this mode can be more efficient and have higher performance than single-stream mode.
- Single-stream mode: Uses a single stream for all functions. In this mode, the preview accurately reflects what will be captured in videos or images. This is a common mode that is used in apps that want to apply effects to the camera stream and have them appear in captured images and videos.
- Open quick settings by tapping the downward facing arrow at the top of the screen.
- Tap the single or multi stream button. This will toggle between single stream or multi stream modes.
- Ultra HDR cannot be enabled in single stream mode.
- Multi or single stream selectors are not available when using Dual Concurrent Cameras.
This section explores features that provide extended functionality and customization within the camera app, going beyond core image and video capture capabilities. These features cater to specific user preferences and developer needs.
Provides advanced camera information and controls for developers.
- Launch the app with extra KEY_DEBUG_MODE set to true
- Access the debug mode UI through the purple “Debug” button in the preview screen
- Intended for developers and may cause instability.
Launch the app into modes with specialized user flow. Also allows configuring content values for media to be captured
- In the launching intent for JCA, set intent action to ACTION_IMAGE_CAPTURE, ACTION_VIDEO_CAPTURE, or INTENT_ACTION_STILL_IMAGE_CAMERA for single image capture, single video capture, or multiple image capture mode.
- Configure content values and insert the url into the intent at MediaStore.EXTRA_OUTPUT
- Launch JCA
This feature allows users to customize the app's appearance by selecting between three modes:
- On: Enables dark mode, displaying UI elements with a darker color scheme.
- Off: Enables light mode, displaying UI elements with a lighter color scheme.
- System: Adopts the system-wide dark mode setting, dynamically adjusting the app's appearance based on the user's device preferences.
The appearance of UI elements will differ depending on the selected mode. This setting only affects the user interface and does not impact the captured images or videos.
- Open the camera app settings from the settings icon in the upper left corner.
- Tap the “Set Dark Mode” setting under “App Settings”.
- Select the desired mode.
Every file containing source code must include copyright and license information. This includes any JS/CSS files that you might be serving out to browsers. (This is to help well-intentioned people avoid accidental copying that doesn't comply with the license.)
Apache header:
Copyright (C) 2024 The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
https://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
