Merge branch 'main' into main

projects/Buluk3472/README.md

@@ -0,0 +1,15 @@
+---
+name: "Buluk 3472"
+slack_handle: "@Buluk 3472 PCB"
+github_handle: "@Buluk 3472 PCB"
+tutorial: 
+---
+
+# FRC CAN Distribution PCB
+
+
+It is a PCB for FRC that help us to easily wire CAN. The last season we make a prototype and now were trying to improve them.
+
+Merchandising total is $30.52 and Shipping Estimated is $38.86 giving a total of $69.38 (Dollars).
+
+We had a little bit of complications because at the beginning we had another and better design but the components for assemblies run out of stock, then this is the remake.

projects/CAN WAGO Buluk 3472/README.md

@@ -0,0 +1,14 @@
+---
+name: "CAN WAGO Buluk 3472"
+slack_handle: "CAN WAGO PCB"
+github_handle: "CAN WAGO PCB"
+tutorial: 
+---
+
+# FRC CAN Distribution PCB (For WAGO connectors)
+
+It is a PCB for FRC that help us to easily wire CAN. I made another PR but this is the best version of it. (Unfortunatly PLCPCB don´t have stock for WAGO)
+
+Merchandising total is $7.30 and Shipping Estimated is $17.50 giving a total of $24.80 (Dollars).
+
+We had a little bit of complications because at the beginning this was the original design but the WAGO connectors for the assemblie run out of stock, then we make another version for using it while we get the connectors.I can't add the assemblie due to that there are not WAGO on stock. So the idea is get the PCB and us weld the connectors.

projects/CAN WAGO Buluk 3472/src/bom.csv

@@ -0,0 +1,3 @@
+ID	Name	Designator	Footprint	Quantity	Manufacturer Part	Manufacturer	Supplier	Supplier Part	Price
+"1"	"WAGO 2601-1110"	"CN1,CN2,CN3,CN4"	"WAGO 2601-1110 2"	"4"	"CONNECTOR"	"null"	"LCSC"	"C9900011140"	""
+"2"	"WAGO 2601-1104"	"ROBORIO,PCM"	"WAGO 2601-1104"	"2"	""	""	""	""	""

projects/CAN WAGO Buluk 3472/src/positions.csv

@@ -0,0 +1,7 @@
+Designator	Footprint	Mid X	Mid Y	Ref X	Ref Y	Pad X	Pad Y	Layer	Rotation	Comment
+"CN1"	"WAGO 2601-1110 2"	"73.28mm"	"8.17mm"	"89.03mm"	"10.67mm"	"89.03mm"	"10.67mm"	"T"	"180"	"WAGO 2601-1110"
+"CN2"	"WAGO 2601-1110 2"	"73.28mm"	"42.63mm"	"57.53mm"	"40.13mm"	"57.53mm"	"40.13mm"	"T"	"0"	"WAGO 2601-1110"
+"CN3"	"WAGO 2601-1110 2"	"35.94mm"	"8.17mm"	"51.69mm"	"10.67mm"	"51.69mm"	"10.67mm"	"T"	"180"	"WAGO 2601-1110"
+"CN4"	"WAGO 2601-1110 2"	"35.94mm"	"42.63mm"	"20.19mm"	"40.13mm"	"20.19mm"	"40.13mm"	"T"	"0"	"WAGO 2601-1110"
+"PCM"	"WAGO 2601-1104"	"99.35mm"	"25.43mm"	"101.85mm"	"27.18mm"	"101.85mm"	"20.18mm"	"T"	"180"	"WAGO 2601-1104"
+"ROBORIO"	"WAGO 2601-1104"	"9.87mm"	"25.37mm"	"7.37mm"	"23.62mm"	"7.37mm"	"30.62mm"	"T"	"0"	"WAGO 2601-1104"

projects/CH340Module/README.md

@@ -0,0 +1,16 @@
+
+---
+name: "Ryan Wang"
+slack_handle: "@Ffive44-1"
+github_handle: "@Ffive44-1"
+tutorial: # Link to the tutorial if you used one
+wokwi: # Link to the Wokwi project if you're submitting for Hacky Holidays
+---
+
+# YOUR PROJECT NAME
+
+<!-- Describe your board in 2-3 sentences. What are you making? What will it do? -->
+"A Simple L298N Module for my Arduino Car"
+<!-- How much is it going to cost? -->
+"$10"
+<!-- Tell us a little bit about your design process. What were some challenges? What helped? ***Totally optional*** -->