NFC Card

[TheSaltTable]

Submission Checklist:

• I am a current high school, middle school, or home schooled student.

  • I have filled out the verification form

• I have joined the #onboard channel on Slack

• I made this board from scratch, even if I followed a tutorial

• I have followed the directions in README.md

  • Created a folder under onboard/projects
  • Filled out TEMPLATE.md as README.md
  • Uploaded Gerber, sources, and schematic
  • Uploaded screenshot of PCB order with all costs included
  • I am ordering the smallest batch size (ie. JLCPCB's smallest order is for 5 boards)
  • If outside the US I've checked that I can afford the customs charges in my country (which isn't covered by the grant)

• (Optional) This project is from a tutorial¹.

• (Optional) I'm in a FIRST (FRC, FTC, FLL, etc.) team. The number is: ____

Footnotes

1. Projects from a tutorial are 100% fine! We just want to ask so we can count how people are using tutorials. ↩

[karmanyaahm]

Hi! Please put your project sources into the "src" folder. They should be two .JSON files, one from the schematic tab, one from the PCB tab.

Also, your exported PDF needs to be from the schematic tab, not the PCB tab.

Your cart.png look good to me though, and I love the design!

[TheSaltTable]

Hello, thank you so much for the feedback. Although, I am having a bit of trouble on how to get the two .JSON files

…

On Thu, Jan 4, 2024 at 8:16 PM Karmanyaah Malhotra ***@***.***> wrote: ***@***.**** requested changes on this pull request. Hi! Please put your project sources <https://docs.easyeda.com/en/Export/Export-EasyEDA-Source-File/index.html> into the "src" folder. They should be two .JSON files, one from the schematic tab, one from the PCB tab. Also, your exported PDF needs to be from the schematic tab, not the PCB tab. Your cart.png look good to me though, and I love the design! — Reply to this email directly, view it on GitHub <#301 (review)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BFDBPZAQYNEZEXEEKAO4T7DYM5IADAVCNFSM6AAAAABBMILV26VHI2DSMVQWIX3LMV43YUDVNRWFEZLROVSXG5CSMV3GSZLXHMYTQMBVGIZDOMZTG4> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[TheSaltTable]

Actually I believe I did it. Whenever you are free, may you check it. Best Wishes- Neel Patel

…

On Thu, Jan 4, 2024 at 8:48 PM Neel Patel ***@***.***> wrote: Hello, thank you so much for the feedback. Although, I am having a bit of trouble on how to get the two .JSON files On Thu, Jan 4, 2024 at 8:16 PM Karmanyaah Malhotra < ***@***.***> wrote: > ***@***.**** requested changes on this pull request. > > Hi! Please put your project sources > <https://docs.easyeda.com/en/Export/Export-EasyEDA-Source-File/index.html> > into the "src" folder. They should be two .JSON files, one from the > schematic tab, one from the PCB tab. > > Also, your exported PDF needs to be from the schematic tab, not the PCB > tab. > > Your cart.png look good to me though, and I love the design! > > — > Reply to this email directly, view it on GitHub > <#301 (review)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/BFDBPZAQYNEZEXEEKAO4T7DYM5IADAVCNFSM6AAAAABBMILV26VHI2DSMVQWIX3LMV43YUDVNRWFEZLROVSXG5CSMV3GSZLXHMYTQMBVGIZDOMZTG4> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[karmanyaahm]

I think you uploaded the PCB.pdf again, the pdf file needs to be from the schematic tab, like this one

[TheSaltTable]

I am really sorry about that mistake. I have fixed it. The PDF is called Schematic_USB project_2023=01-06.pdf. Also, I don't really know how to delete the PCB.pdf file so is it fine if they can just stay there. Best Wishes- Neel Patel

…

On Fri, Jan 5, 2024 at 11:43 PM Karmanyaah Malhotra < ***@***.***> wrote: I think you uploaded the PCB.pdf again, the pdf file needs to be from the schematic tab, like this one <https://github.com/hackclub/OnBoard/blob/main/projects/Alex%20P's%20NFC%20Card/schematic.pdf> — Reply to this email directly, view it on GitHub <#301 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BFDBPZGRDSWXE62ODHTUAV3YNDI6BAVCNFSM6AAAAABBMILV26VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNZZGU2DONBQGA> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[karmanyaahm]

lgtm!

[karmanyaahm]

Have you filled out the verification form? If you already have, np, just waiting on that to get approved

[karmanyaahm]

cc @sarthaktexas

[TheSaltTable]

Hey I was wondering if there is anyone else I need to talk to so I can get the second approval for the PCB card thing.

…

-Neel Patel

On Tue, Jan 9, 2024 at 1:03 AM Karmanyaah Malhotra ***@***.***> wrote: cc @sarthaktexas <https://github.com/sarthaktexas> — Reply to this email directly, view it on GitHub <#301 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BFDBPZFZHVLHGGROGLXPU4TYNTMU5AVCNFSM6AAAAABBMILV26VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOBSGQ3DCMZSHE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[karmanyaahm]

@TheSaltTable you've filled out the airtable form from the PR right?

[TheSaltTable]

Yes, I did.

…

On Fri, Jan 12, 2024 at 5:50 PM Karmanyaah Malhotra < ***@***.***> wrote: @TheSaltTable <https://github.com/TheSaltTable> you've filled out the airtable form <https://airtable.com/app4Bs8Tjwvk5qcD4/pagxECjJZOgvKVnLd/form> from the PR right? — Reply to this email directly, view it on GitHub <#301 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BFDBPZHACLW7QWKTUBEYNVLYOG445AVCNFSM6AAAAABBMILV26VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOJQGA4DGNJUGM> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[sarthaktexas]

approved! sent rn