added screenshot

README.md

@@ -0,0 +1,161 @@
+
+````markdown
+# 🚀 Deploy an NGINX Web Server on AWS
+
+## 🎉 Welcome to My First DevOps Challenge!
+
+This project demonstrates my ability to **deploy a web server** and **manage a GitHub workflow**, closely mirroring real-world DevOps environments.
+
+---
+
+## 🧩 Objectives
+
+By the end of this task, I achieved the following:
+- ✅ Set up and managed a GitHub repository.
+- ✅ Deployed and configured an **NGINX** web server on **AWS EC2**.
+- ✅ Served a **custom webpage** accessible from the internet.
+- ✅ Built a **custom VPC network** from scratch.
+
+---
+
+## ⚙️ Part 1: GitHub Setup
+
+**Steps:**
+1. Forked the repository: `hng13-stage0-devops`
+2. Added a `README.md` file containing:
+   - My **Name**
+   - My **Slack Username**
+   - A **Short Project Description**
+
+---
+
+## ☁️ Part 2: NGINX Web Server Deployment
+
+### 🧭 Infrastructure Overview
+
+I built a custom AWS network architecture consisting of:
+
+| Resource | Description |
+|-----------|--------------|
+| **VPC** | CIDR Block `10.0.0.0/16` |
+| **Subnets** | Two Public Subnets for availability |
+| **Internet Gateway (IGW)** | Enables internet access |
+| **Route Table** | Routes outbound traffic (0.0.0.0/0) to the IGW |
+| **Security Group** | Allows HTTP (80) and SSH (22) |
+| **EC2 Instance** | Ubuntu instance running NGINX |
+
+---
+
+### 🔧 Step-by-Step Deployment
+
+#### 1️⃣ Create a Custom VPC
+```bash
+VPC CIDR: 10.0.0.0/16
+````
+
+#### 2️⃣ Create Two Public Subnets
+
+| Subnet Name     | Availability Zone | CIDR Block  |
+| --------------- | ----------------- | ----------- |
+| public-subnet-1 | us-east-1a        | 10.0.1.0/24 |
+| public-subnet-2 | us-east-1b        | 10.0.2.0/24 |
+
+✅ Enabled *auto-assign public IPv4* for both.
+
+#### 3️⃣ Create and Attach an Internet Gateway
+
+* Created hng-igw and attached it to custom vpc hng-vpc
+
+#### 4️⃣ Configure Route Table
+
+* Destination: `0.0.0.0/0`
+* Subnets Associations: public-subnet-1
+                        public-subnet-2
+* Edit Route then Add route 0.0.0.0/0 to internet gateway hng-igw.
+
+#### 5️⃣ Create Security Group
+
+Inbound Rules:
+
+| Type | Port | Source    |
+| ---- | ---- | --------- |
+| HTTP | 80   | 0.0.0.0/0 |
+| SSH  | 22   | 0.0.0.0/0 |
+
+---
+
+### 💻 Launch the EC2 Instance
+
+* **AMI:** Ubuntu (latest)
+* **VPC:** Custom VPC
+* **Subnet:** public-subnet-1
+* **Auto-assign Public IP:** Enabled
+* **Security Group:** Custom SG (HTTP + SSH)
+
+---
+
+### 🌐 Install and Configure NGINX
+
+```bash
+sudo apt update -y
+sudo apt install nginx -y
+sudo systemctl enable nginx
+sudo systemctl start nginx
+sudo systemctl status nginx
+```
+If successful, you’ll see your **custom NGINX web page**.
+---
+
+### 📝 Edit Web Page Content
+
+```bash
+sudo vi /var/www/html/index.html
+```
+
+Updated with the content from the forked project, as instructed.
+
+---
+
+### ✅ Testing the Deployment
+
+Access the server in your browser using:
+
+```
+http://<your-ec2-public-ip>
+e.g. http://54.205.143.172/
+
+```
+Finished work is captured in the screenshot.
+---
+
+## 📊 Project Summary
+
+| Component        | Purpose                           |
+| ---------------- | --------------------------------- |
+| GitHub Repo      | Version control and documentation |
+| AWS VPC          | Custom isolated network           |
+| Subnets          | Public access for web traffic     |
+| Internet Gateway | Enables outbound internet         |
+| EC2 Instance     | Hosts NGINX web server            |
+| NGINX            | Serves static web page            |
+| Security Group   | Firewall for SSH and HTTP         |
+
+---
+
+## 🧠 Key Learnings
+
+* Hands-on experience with AWS networking fundamentals.
+* Understanding of NGINX web server configuration.
+* Version control and documentation with GitHub.
+* How to connect infrastructure components for a production-ready setup.
+
+---
+
+## 👤 Author Information
+
+* **Name:** Anthony Usoro
+* **Slack Username:** @anthonyusoro
+* **Project:** Deploy an NGINX Web Server on AWS
+
+```
+

index.html

@@ -1,5 +1,3 @@
-html
-CopyEdit
 <!DOCTYPE html>
 <html lang="en">
 <head>
@@ -30,9 +28,9 @@
 </head>
 <body>
   <div class="container">
-    <h1>Welcome to DevOps Stage 0 - John Doe/@johndoe</h1>
+    <h1>Welcome to DevOps Stage 0 - Anthony Usoro /@anthonyusoro</h1>
     <p>Successfully deployed on AWS</p>
-    <p class="timestamp">Deployed: 08/09/2025</p>
+    <p class="timestamp">Deployed: 17/10/2025</p>
   </div>
 </body>
 </html>