remove lite version for README

README-ja.md

@@ -72,11 +72,9 @@ Usage:
 ./build.sh lunch        - Select a board to build
 ./build.sh [board]      - Build [board] directly, supported boards asfollows:
 milkv-duo
-milkv-duo-lite
 milkv-duo256m
-milkv-duo256m-lite
 ```
-Listed at the bottom is the list of currently supported target versions. Those with the `lite` suffix is a simplified version and does not include libraries and application packages such as python, pip, pinpong, etc.
+Listed at the bottom is the list of currently supported target versions.
 
 As shown in the prompt, there are two ways to compile the target version.
 
@@ -85,9 +83,7 @@ The first method is to execute `./build.sh lunch` to bring up the interactive me
 # ./build.sh lunch
 Select a target to build:
 1. milkv-duo
-2. milkv-duo-lite
-3. milkv-duo256m
-4. milkv-duo256m-lite
+2. milkv-duo256m
 Which would you like:
 ```
 
@@ -111,9 +107,7 @@ tar -xf host-tools.tar.gz -C /your/sdk/path/
 Then enter the following commands in sequence to complete the step-by-step compilation. Replace `[board]` and `[config]` in the command with the version that needs to be compiled. The currently supported `board` and corresponding `config` are as follows:
 ```
 milkv-duo               cv1800b_milkv_duo_sd
-milkv-duo-lite          cv1800b_milkv_duo_sd
 milkv-duo256m           cv1812cp_milkv_duo256m_sd
-milkv-duo256m-lite      cv1812cp_milkv_duo256m_sd
 ```
 
 ```bash
@@ -189,11 +183,8 @@ docker exec -it duodocker /bin/bash -c "cd /home/work && cat /etc/issue && ./bui
 Note that the `./build.sh [board]` at the end of the command is the same as the previous usage in the one-click compilation instructions in Ubuntu 22.04. Use `./build.sh` can see how to use the command, use `./ build.sh lunch` can bring up the interactive selection menu, use `./build.sh [board]` to directly compile the target version, `[board]` can be replaced with:
 ```
 milkv-duo
-milkv-duo-lite
 milkv-duo256m
-milkv-duo256m-lite
 ```
-*Versions with the `lite` suffix is a simplified version and does not include libraries and application packages such as python, pip, pinpong, etc.*
 
 コマンド中のパラメータについて:
 - `duodocker` 実行中のDockerの名前です。先程設定したものと同じである必要があります。
@@ -232,9 +223,7 @@ root@8edea33c2239:/# cd /home/work/
 Then enter the following commands in sequence to complete the step-by-step compilation. Replace `[board]` and `[config]` in the command with the version that needs to be compiled. The currently supported `board` and corresponding `config` are as follows:
 ```
 milkv-duo               cv1800b_milkv_duo_sd
-milkv-duo-lite          cv1800b_milkv_duo_sd
 milkv-duo256m           cv1812cp_milkv_duo256m_sd
-milkv-duo256m-lite      cv1812cp_milkv_duo256m_sd
 ```
 
 ```bash

README-zh.md

@@ -70,13 +70,11 @@ Usage:
 ./build.sh lunch        - Select a board to build
 ./build.sh [board]      - Build [board] directly, supported boards asfollows:
 milkv-duo
-milkv-duo-lite
 milkv-duo-spinand
 milkv-duo-spinor
 milkv-duo256m
-milkv-duo256m-lite
 ```
-最下边列出的是当前支持的目标版本列表，带 `lite` 后缀的为精简版，不包含 python，pip, pinpong 等库和应用包。带`spinor`或者`spinand` 后缀的为基于IOB板载NOR FLASH或者NAND FLASH的版本。
+最下边列出的是当前支持的目标版本列表。带 `spinor` 或者 `spinand` 后缀的为基于 IOB 板载 NOR FLASH 或者 NAND FLASH 的版本。
 
 如提示中所示，有两种方法来编译目录版本。
 
@@ -85,12 +83,9 @@ milkv-duo256m-lite
 # ./build.sh lunch
 Select a target to build:
 1. milkv-duo
-2. milkv-duo-lite
-3. milkv-duo-spinand
-4. milkv-duo-spinor
-5. milkv-duo256m
-6. milkv-duo256m-lite
-7. milkv-duos
+2. milkv-duo-spinand
+3. milkv-duo-spinor
+4. milkv-duo256m
 Which would you like:
 ```
 
@@ -114,11 +109,9 @@ tar -xf host-tools.tar.gz -C /your/sdk/path/
 再依次输入如下命令完成分步编译，命令中的 `[board]` 和 `[config]` 替换为需要编译的版本，当前支持的 `board` 和对应的 `config` 如下：
 ```
 milkv-duo               cv1800b_milkv_duo_sd
-milkv-duo-lite          cv1800b_milkv_duo_sd
 milkv-duo-spinand       cv1800b_milkv_duo_spinand
 milkv-duo-spinor        cv1800b_milkv_duo_spinor
 milkv-duo256m           cv1812cp_milkv_duo256m_sd
-milkv-duo256m-lite      cv1812cp_milkv_duo256m_sd
 ```
 
 ```bash
@@ -196,13 +189,10 @@ docker exec -it duodocker /bin/bash -c "cd /home/work && cat /etc/issue && ./bui
 注意命令最后的 `./build.sh [board]` 和前面在 Ubuntu 22.04 中一键编译说明中的用法是一样的，直接 `./build.sh` 可以查看命令的使用方法，用 `./build.sh lunch` 可以调出交互选择菜单，用 `./build.sh [board]` 可以直接编译目标版本，`[board]` 可以替换为:
 ```
 milkv-duo
-milkv-duo-lite
 milkv-duo-spinand
 milkv-duo-spinor
 milkv-duo256m
-milkv-duo256m-lite
 ```
-*带 `lite` 后缀的版本为精简版，不包含 python，pip, pinpong 等库和应用包*
 
 命令中部分参数说明:
 - `duodocker` 运行的 Docker 名字, 与上一步中设置的名字要保持一致
@@ -241,11 +231,9 @@ root@8edea33c2239:/# cd /home/work/
 再依次输入如下命令完成分步编译，命令中的 `[board]` 和 `[config]` 替换为需要编译的版本，当前支持的 `board` 和对应的 `config` 如下：
 ```
 milkv-duo               cv1800b_milkv_duo_sd
-milkv-duo-lite          cv1800b_milkv_duo_sd
 milkv-duo-spinand       cv1800b_milkv_duo_spinand
 milkv-duo-spinor        cv1800b_milkv_duo_spinor
 milkv-duo256m           cv1812cp_milkv_duo256m_sd
-milkv-duo256m-lite      cv1812cp_milkv_duo256m_sd
 ```
 
 ```bash

README.md

@@ -72,11 +72,9 @@ Usage:
 ./build.sh lunch        - Select a board to build
 ./build.sh [board]      - Build [board] directly, supported boards asfollows:
 milkv-duo
-milkv-duo-lite
 milkv-duo256m
-milkv-duo256m-lite
 ```
-Listed at the bottom is the list of currently supported target versions. Those with the `lite` suffix is a simplified version and does not include libraries and application packages such as python, pip, pinpong, etc.
+Listed at the bottom is the list of currently supported target versions.
 
 As shown in the prompt, there are two ways to compile the target version.
 
@@ -85,9 +83,7 @@ The first method is to execute `./build.sh lunch` to bring up the interactive me
 # ./build.sh lunch
 Select a target to build:
 1. milkv-duo
-2. milkv-duo-lite
-3. milkv-duo256m
-4. milkv-duo256m-lite
+2. milkv-duo256m
 Which would you like:
 ```
 
@@ -111,9 +107,7 @@ tar -xf host-tools.tar.gz -C /your/sdk/path/
 Then enter the following commands in sequence to complete the step-by-step compilation. Replace `[board]` and `[config]` in the command with the version that needs to be compiled. The currently supported `board` and corresponding `config` are as follows:
 ```
 milkv-duo               cv1800b_milkv_duo_sd
-milkv-duo-lite          cv1800b_milkv_duo_sd
 milkv-duo256m           cv1812cp_milkv_duo256m_sd
-milkv-duo256m-lite      cv1812cp_milkv_duo256m_sd
 ```
 
 ```bash
@@ -189,11 +183,8 @@ docker exec -it duodocker /bin/bash -c "cd /home/work && cat /etc/issue && ./bui
 Note that the `./build.sh [board]` at the end of the command is the same as the previous usage in the one-click compilation instructions in Ubuntu 22.04. Use `./build.sh` can see how to use the command, use `./ build.sh lunch` can bring up the interactive selection menu, use `./build.sh [board]` to directly compile the target version, `[board]` can be replaced with:
 ```
 milkv-duo
-milkv-duo-lite
 milkv-duo256m
-milkv-duo256m-lite
 ```
-*Versions with the `lite` suffix is a simplified version and does not include libraries and application packages such as python, pip, pinpong, etc.*
 
 Description of some parameters in the command:
 - `duodocker` The name of the running Docker must be consistent with the name set in the previous step.
@@ -232,9 +223,7 @@ root@8edea33c2239:/# cd /home/work/
 Then enter the following commands in sequence to complete the step-by-step compilation. Replace `[board]` and `[config]` in the command with the version that needs to be compiled. The currently supported `board` and corresponding `config` are as follows:
 ```
 milkv-duo               cv1800b_milkv_duo_sd
-milkv-duo-lite          cv1800b_milkv_duo_sd
 milkv-duo256m           cv1812cp_milkv_duo256m_sd
-milkv-duo256m-lite      cv1812cp_milkv_duo256m_sd
 ```
 
 ```bash