Multiprotocol v1.3.4.63

Change Log since v1.3.4.31

• KAMTOM
  • New surface protocol for KAMTOM RC Racing KM24xx (KM32xx?), Pinecone SG-24xx
  • Telemetry enabled
• SHENQI2
  • New surface protocol for Shenqiwei 1/20 Mini Motorcycle
• SLT/V1_4CH
  • Now compatible with transmitters: SLT2 and SLT2 DLC, receivers: SPMXSE2825RX, SPMXSBER1025G, SPMXSE4510RX, ...
• SLT/SLT6X
  • New air protocol SLT6X, models: Blade Revolution 90 FP helicopter (SLT6 transmitter)
• DSM/DSMR
  • Fixed issue with some receivers
• DSM
  • Fixed DSM Clone
  • Add XPlus channels sending a total of 16 channels, only available with the latest version of EdgeTX supporting the selection of more than 12 channels
• Kyosho3/ASF
  • Fixed bind issues
• FX/QF012
  • New QF012 air protocol, model: QF012 SBD Dauntless
• FX/BM26
  • New BM26 air protocol, model: P51
• FX/A570
  • New A570 air protocol, models: VTOL Kootai A570, QIDI-570
• FX
  • Add telemetry for some of the sub protocols
• XK2
  • Add Gyro off feature
  • Add low battery telemetry
• MouldKg
  • Add support for 6 ports brick
  • Sub protocols have been renamed
• AFHDS2A/Gyro_Off/Gyro_On/Gyro_On_Rev
  • New sub protocols for BS4/BS6 surface receivers
  • Part of this change, the AFHDS2A protocol now always sends 16 channels to the receiver (no more subprotocols ending with 16). LQI (Link Quality Indicator) has been moved to CH17.
• AFHDS2A
  • Telemetry fix for CROSSOVER-RX
• SGF22
  • Add telemetry for some of the sub protocols
• SGF22/CX10
  • New protocol for Cheerson CX-10 with red PCB
  • Only 2 IDs
• RadioLink/DumboRC
  • Add telemetry
• RadioLink/Dumbo_P
  • Add surface protocol for RXs: P6F/P6FG/P6DC/P6DCG/P6FP/P10F/P10FG (Other P Series should work as well)
  • Lua script: DumboRC P Series.lua for full configuration
• WPL
  • New protocol for TX: "Basic", Models: D12 / D12KM / D22 / D32 / D42 / D14
  • Only 1 ID
• KF606/KF606
  • Add LED channel
• HONTAI/XKK170
  • Add Optical enable/disable channel for K270
• XK2/X4
  • Add Stunt channel
• REALACC/WLV8TX
  • New surface WLV8TX protocol for WLtoys 284019A, 284191, Cars using V8 Transmitter
• FQ777/XBM37
  • New air protocol for T-Smart XBM-37 (with SV7241A)
• ARES
  • New air protocol for ARES Gamma 370, P-51D Mustang 350, RTF models with 6HPA-Tx and AZS12006-Rx (6 channel)

A big THANKS to @MRC3742, @ELynx, @rdba2k and @frankiearzu for contributing to the Multiprotocol code.

Flashing these firmwares from a computer require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.

Multiprotocol v1.3.4.31

Change Log since v1.3.4.0

• DSM/DSM2SFC
  • New DSM2 surface protocol
• Kyosho3/ASF
  • New Kyosho ASF surface protocol
• TRAXXAS/TQ2
  • 4 to 6 channels -> Warning: channels order changed
• TRAXXAS/TQ1
  • New TQ1 surface protocol
• JIABAILE
  • New STD surface protocol for JIABAILE 1/43 cars without gyro
  • New Gyro surface protocol for JIABAILE 1/43 cars with gyro
• SLT/V1_4CH
  • New 4 channels surface protocol
• SLT/RF_SIM
  • New air protocol for RealFlight SLT dongles
• FX/Q560
  • New air protocol for the QIDI-560
• XK2
  • New X4 air protocol. TX: XK X4-A160, X5S, models: XK A160S, XK A280, XK A300
  • New P10 air protocol. Model P10=Parkten J3-CUB
• YuXiang
  • New YuXiang air protocol. Models E190 F07 UH-1D, E186 F08 Bell-206
• HONTAI/XKK170
  • New XKK170 air protocol. Model XK K170 UH-60L Black hawk
• H36
  • New air protocol for the model JJRC H36 with a JR-NH010R9 board
• MT99xx2/SU35
  • New SU35 air protocol for the QF009 SU35
• SGF22/F22S
  • New F22S air protocol for the P10=Parkten F22S
• SGF22/J20
  • New J20 air protocol for the KF700 J20
• SGF22/F22
  • Fix none working IDs
  • New TrimReset channel
  • New channels for the FX922 plane
• REALACC
  • Multi IDs
  • Additional channels: ThCut and Rotate
• E129/C186
  • New debug channel
• V761
  • New beeper channel
• DSM/DSMR_1F
  • Fix RX receiver number/model match
• Automatic builds
  • New Arduino CLI version

Flashing these firmwares from a computer require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.

Multiprotocol v1.3.4.0

Change Log since v1.3.3.33

• Automatic builds
  • Separated Air and Surface (SFC) protocols into different builds to gain flash space
  • Added EU/FCC builds
• E129/C186
  • New circular flight and flip flags
• V911S/E119
  • New 6G/Senior and light flags
• Kyosho/FHSS
  • Allow surface Kyosho Syncro RXs to bind with the FHSS sub protocol
• SGF22
  • New air protocol for the SGF22 model
• EazyRC
  • New surface protocol for the EazyRC cars
• Radiolink/RC4G
  • New surface RC4G subprotocol
• XK/Cars
  • New surface Cars subprotocol for WLtoys cars 284131/284161/284010/124016/124017/144010 and Eachine EAT14
• J6Pro
  • bug fix
• TRAXXAS/TQ
  • TQ protocol (not TQi yet): Multi IDs and RF frequencies
• LOSI
  • Multi IDs and RF frequencies
• Pelikan/SCX24
  • More frequencies and IDs - Thanks @benlye
• DSM
  • Fix bind with Lemon RX Gen 2 - Thanks @frankiearzu
  • Black&White Radios new model setup. Now it can setup completely a plane from zero
  • Color version; simplified code for Tail mixes, and fix Taileron setup
• DSM Fwd Programming
  • v0.56 Thanks @frankiearzu
  • Black&White Radios new model setup. Now it can setup completely a plane from zero
  • Color version; simplified code for Tail mixes, and fix Taileron setup
• MultiConfig
  • bug fix for the IDs with 0 values - Thanks @pagrey

Flashing these firmwares from a computer require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.

Multiprotocol v1.3.3.33

Change Log since v1.3.3.20

• V761/4CH
  • Telemetry for the newest models (761-11 and above): the battery status ok/empty is in A1 (4.4V -> 2.2V)
• FX/9630
  • New protocol for the FX9630 and QIDI-550 models
• DSM_RX
  • Thanks @johnnym007
  • DSM TX clone capabilities. Added sub protocols Clone and Erase. Need the latest (nightly?) version of EdgeTX to access the Clone option.
• FrSkyX2
  • Fix Archer bind issues
  • Added an additional address byte in the bind payload
• FrSkyX
  • Fix SPORT issue with LBT
• MT99XX/F949G
  • Added flags for the model KFPLAN Z61 BF109
• KF606/ZCZ50
  • New sub protocol for the ZC-Z50v2 Cessna
• DSM Fwd Programming
  • Many improvements in v0.55 thanks to @frankiearzu
• E01X
  • E01X protocol and subprotocols E012 and E015 commented out from the automated builds to gain flash space...

Flashing these firmwares from a computer require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.

Multiprotocol v1.3.3.20

Change Log since v1.3.3.14

• V761/TOPRC
  • New protocol for the Top RC Hobby Spitfire, P51D, BF-109
• FX/620
  • New protocol for the FX620 SU35
• MT99XX2/PA18
  • New protocol for the PA18 mini - UNTESTED and only 1 ID
• Kyosho2/KT-17
  • New protocol - UNTESTED and only 1 ID
• DSM Fwd Programming
  • Some improvements
• Multi core
  • Use new compiler version

Flashing these firmwares from a computer require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.

Multiprotocol v1.3.3.14

Change Log since v1.3.3.7

• E129/C186
  • New protocol for the C186/E120, C127/E110, K127 helis
• MT99XX2/PA18
  • New protocol for the PA18 mini - UNTESTED and only 1 ID
• HoTT
  • Fix failsafe for all 16 channels
• HoTT Model Locator script
  • New script
• DSM Fwd Programming
  • Some improvements
• MultiConfig
  • Bug fix
• Multi core
  • RF2500 RF component
    • Expanded emulation layer using the CYRF6936

Flashing these firmwares from a computer require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.

Multiprotocol v1.3.3.7

Change Log since v1.3.3.0

• V911S/E119
  • Added 6G/3D channel for planes like the XK A220 P-40, newer XK A800
• MT99xx/A180
  • Added 6G/3D channel and RX LED channel for planes like the F949S
• HoTT
  • Added HoTT device warnings. Need the latest OpenTX version.
• MT99xx/DRAGON
  • Compatible with the Eachine Mini Cessna
• Devo
  • Support for 2 GPS formats
• DSM Fwd Programming
  • Some improvements
• PROPEL
  • Fixed some of the telemetry. I still haven't worked out the number of life...
• Multi core
  • HS6200 RF component
    • Emulation layer using the CYRF6936
    • Tested on the E015 and should work for all E01X subprotocols

Flashing these firmwares from a computer require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.

Multiprotocol v1.3.3.0

Change Log since v1.3.2.86

• Xerall
  • New protocol for the Xerall TankCopter
• KF606/MIG320
  • New sub protocol for the Zhiyang MIG-320 plane
• MT99xx/F949G
  • New sub protocol for the F949G plane
• V911S
  • Added Rate on channel 6 (default is high)
• V761
  • Code cleanup
  • A slight trim was applied on aileron which has been removed
• RadioLink
  • Fixed RSSI displayed value
• DSM RX
  • Fixed the link with some Spektrum radios
• BUGSMINI
  • Fixed a mistake introduced when introducing the XN297 emulation layer
• XN297Dump
  • Enhanced payload detection fixed
• Multi core
  • Protocols/subprotocols/flags can now be enumerated quickly by the radio
    • Used by EdgeTX (latest nightly) for a dynamic protocol list/selection in alphabetic order
  • XN297
    • Emulation layer can now send/receive packets with a length of 0
    • Emulation layer now returns the number of bytes received in enhanced mode
• Automatic build
  • Removed the following protocols to fit the firmware in Flash: CFLIE, MOULDKG, IKEAANSLUTA
    • If you need these protocols, you need to compile the code by yourself
  • Prefix release binaries with mm instead of multi
  • Added CC2500 64KB builds for TX12S and T8/T8Pro

Flashing these firmwares from a computer require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.

Multiprotocol v1.3.2.86

Change Log since v1.3.2.77

• LOSI
  • New protocol emulating the LSR-3000 TX
  • Only 1 ID available. More IDs can be added if you dump your original TX
• Mould King
  • Technic Brick models
  • Analog and digital TXs
  • Up to 4 bricks=16 motors can be controlled at the same time
• XK
  • Fix twitch on other channels than rudder
• IKEA Ansluta remote-controllable lighting protocol
• Multi Config
  • MultiConfig.lua script v0.2 enables to modify on a Multi module the Global ID, Cyrf ID or format the EEPROM
  • Matching the ID of 2 Multi modules enable them to control the same receivers without rebinding. Be carefull the 2 "cloned" modules should not be used at the same time unless you know what you are doing.
  • Supported from Multi v1.3.2.85 or above and OpenTX 2.3.12 or above

Flashing these firmwares from a computer require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.

Multiprotocol v1.3.2.77

Change Log since v1.3.2.61

• DSM/DSMR
  • New DSMR subprotocol for DSMR surface receivers
  • Only 22 IDs available, use RX num to cycle through them
  • Telemetry enabled
• Pelikan/SCX24
  • New SCX24 subprotocol for 3 channels surface receivers
  • TX: Axial AX-4 2.4GHz transmitter and Panda Hobby 3CH Smart Radio 2.4GHz (MT-305A) and Models: Axial SCX24: Deadbolt, Jeep Wranger Rubicon, Chevrolet 1967 C10, B-17 Betty and Panda Hobby: Tetra K1, X1, X2
• OMP
  • The OMP protocol now supports telemetry using the CC2500 (was using the NRF24L01 previously)
  • If the CC2500 RF component is not installed then the NRF24L01 will be used including telemetry.
• MT99XX/Dragon
  • Added telemetry: A1 = battery voltage with a Ratio of 25.5, A2=battery low flag (0=off,>0=on) and RSSI = dummy value of 100
• DSM
  • Added a table detailling the different RX output ranges based on the radio settings
• E016H
  • Separated protocol from E01X due to the different structure
• Hitec
  • Fixed RF tunning
• Kyosho/FHSS
  • Fixed protocol after the introduction of sub protocol Hype
• Devo
  • Fixed GPS year
• FrSkyX2
  • Updated bind to work with some new RXs code
• CABELL
  • Protocol optimization: 1.5KB saved, thanks Mike!
• Multi core
  • XN297 emulation layer changed
    • Loads of protocols have been touched by this change. Some testing has been done but please test on all your models
    • The XN297 emulation selects in this order:
      • the CC2500 if it is available and bitrate=250K. Configure the option field automatically for RF tune
        • CC2500 can now receive XN297 normal and enhanced payloads
      • the NRF for all bitrates if it is available
      • if NRF is not available and bitrate=1M then an invalid protocol is sent automatically to the radio
    • CC2500 only modules have more protocols/subprotocols available: MJXQ, MT99XX, Q303 and XK
  • Packed protocols defintion: 400 bytes saved

Flashing these firmwares from a computer require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.