Skip to content
This repository was archived by the owner on Nov 11, 2024. It is now read-only.

DRM driver for hyperv synthetic video device, - #28

Open
Shao-Feng wants to merge 1 commit into
projectceladon:masterfrom
Shao-Feng:basic_5.4.58
Open

DRM driver for hyperv synthetic video device,#28
Shao-Feng wants to merge 1 commit into
projectceladon:masterfrom
Shao-Feng:basic_5.4.58

Conversation

@Shao-Feng

Copy link
Copy Markdown

based on hyperv_fb framebuffer driver.
Also added config option "DRM_HYPERV" to enabled
this driver.

Signed-off-by: Deepak Rawat drawat.floss@gmail.com
Signed-off-by: Shaofeng Tang shaofeng.tang@intel.com

based on hyperv_fb framebuffer driver.
Also added config option "DRM_HYPERV" to enabled
this driver.

Signed-off-by: Deepak Rawat <drawat.floss@gmail.com>
Signed-off-by: Shaofeng Tang <shaofeng.tang@intel.com>
sysopenci pushed a commit that referenced this pull request May 28, 2021
[ Upstream commit d5027ca63e0e778b641cf23e3f5c6d6212cf412b ]

Ritesh reported a bug [1] against UML, noting that it crashed on
startup. The backtrace shows the following (heavily redacted):

(gdb) bt
...
 #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268
 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2
 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72
...
 #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359
...
 #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486
 #45 0x00007f8990968b85 in __getgrnam_r [...]
 #46 0x00007f89909d6b77 in grantpt [...]
 #47 0x00007f8990a9394e in __GI_openpty [...]
 #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407
 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598
 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45
 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334
 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144

indicating that the UML function openpty_cb() calls openpty(),
which internally calls __getgrnam_r(), which causes the nsswitch
machinery to get started.

This loads, through lots of indirection that I snipped, the
libcom_err.so.2 library, which (in an unknown function, "??")
calls sem_init().

Now, of course it wants to get libpthread's sem_init(), since
it's linked against libpthread. However, the dynamic linker
looks up that symbol against the binary first, and gets the
kernel's sem_init().

Hajime Tazaki noted that "objcopy -L" can localize a symbol,
so the dynamic linker wouldn't do the lookup this way. I tried,
but for some reason that didn't seem to work.

Doing the same thing in the linker script instead does seem to
work, though I cannot entirely explain - it *also* works if I
just add "VERSION { { global: *; }; }" instead, indicating that
something else is happening that I don't really understand. It
may be that explicitly doing that marks them with some kind of
empty version, and that's different from the default.

Explicitly marking them with a version breaks kallsyms, so that
doesn't seem to be possible.

Marking all the symbols as local seems correct, and does seem
to address the issue, so do that. Also do it for static link,
nsswitch libraries could still be loaded there.

[1] https://bugs.debian.org/983379

Reported-by: Ritesh Raj Sarraf <rrs@debian.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Tested-By: Ritesh Raj Sarraf <rrs@debian.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
JeevakaPrabu referenced this pull request in projectceladon-ci/linux-intel-lts2019-chromium Aug 5, 2021
[ Upstream commit b5befe842e6612cf894cf4a199924ee872d8b7d8 ]

An srcu_struct structure that is initialized before rcu_init_geometry()
will have its srcu_node hierarchy based on CONFIG_NR_CPUS.  Once
rcu_init_geometry() is called, this hierarchy is compressed as needed
for the actual maximum number of CPUs for this system.

Later on, that srcu_struct structure is confused, sometimes referring
to its initial CONFIG_NR_CPUS-based hierarchy, and sometimes instead
to the new num_possible_cpus() hierarchy.  For example, each of its
->mynode fields continues to reference the original leaf rcu_node
structures, some of which might no longer exist.  On the other hand,
srcu_for_each_node_breadth_first() traverses to the new node hierarchy.

There are at least two bad possible outcomes to this:

1) a) A callback enqueued early on an srcu_data structure (call it
      *sdp) is recorded pending on sdp->mynode->srcu_data_have_cbs in
      srcu_funnel_gp_start() with sdp->mynode pointing to a deep leaf
      (say 3 levels).

   b) The grace period ends after rcu_init_geometry() shrinks the
      nodes level to a single one.  srcu_gp_end() walks through the new
      srcu_node hierarchy without ever reaching the old leaves so the
      callback is never executed.

   This is easily reproduced on an 8 CPUs machine with CONFIG_NR_CPUS >= 32
   and "rcupdate.rcu_self_test=1". The srcu_barrier() after early tests
   verification never completes and the boot hangs:

	[ 5413.141029] INFO: task swapper/0:1 blocked for more than 4915 seconds.
	[ 5413.147564]       Not tainted 5.12.0-rc4+ #28
	[ 5413.151927] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
	[ 5413.159753] task:swapper/0       state:D stack:    0 pid:    1 ppid:     0 flags:0x00004000
	[ 5413.168099] Call Trace:
	[ 5413.170555]  __schedule+0x36c/0x930
	[ 5413.174057]  ? wait_for_completion+0x88/0x110
	[ 5413.178423]  schedule+0x46/0xf0
	[ 5413.181575]  schedule_timeout+0x284/0x380
	[ 5413.185591]  ? wait_for_completion+0x88/0x110
	[ 5413.189957]  ? mark_held_locks+0x61/0x80
	[ 5413.193882]  ? mark_held_locks+0x61/0x80
	[ 5413.197809]  ? _raw_spin_unlock_irq+0x24/0x50
	[ 5413.202173]  ? wait_for_completion+0x88/0x110
	[ 5413.206535]  wait_for_completion+0xb4/0x110
	[ 5413.210724]  ? srcu_torture_stats_print+0x110/0x110
	[ 5413.215610]  srcu_barrier+0x187/0x200
	[ 5413.219277]  ? rcu_tasks_verify_self_tests+0x50/0x50
	[ 5413.224244]  ? rdinit_setup+0x2b/0x2b
	[ 5413.227907]  rcu_verify_early_boot_tests+0x2d/0x40
	[ 5413.232700]  do_one_initcall+0x63/0x310
	[ 5413.236541]  ? rdinit_setup+0x2b/0x2b
	[ 5413.240207]  ? rcu_read_lock_sched_held+0x52/0x80
	[ 5413.244912]  kernel_init_freeable+0x253/0x28f
	[ 5413.249273]  ? rest_init+0x250/0x250
	[ 5413.252846]  kernel_init+0xa/0x110
	[ 5413.256257]  ret_from_fork+0x22/0x30

2) An srcu_struct structure that is initialized before rcu_init_geometry()
   and used afterward will always have stale rdp->mynode references,
   resulting in callbacks to be missed in srcu_gp_end(), just like in
   the previous scenario.

This commit therefore causes init_srcu_struct_nodes to initialize the
geometry, if needed.  This ensures that the srcu_node hierarchy is
properly built and distributed from the get-go.

Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
@sysopenci sysopenci added the Stale Stale label for inactive open prs label Sep 5, 2024
Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.

Labels

Stale Stale label for inactive open prs

Projects

None yet

Development

Successfully merging this pull request may close these issues.

2 participants