Skip to content

Latest commit

 

History

History
120 lines (70 loc) · 2.71 KB

validate_network_bgp.md

File metadata and controls

120 lines (70 loc) · 2.71 KB

Validate Network BGP

canu validate network bgp

Validate BGP neighbors.

This command will check the BGP neighbors for the switch IP addresses entered. All of the neighbors of a switch must be ‘Established’, or the verification will fail.

If a switch that is not a spine switch is tested, it will show in the results table as ‘SKIP’.

  • Enter a comma separated list of IP addresses with the ‘—ips’ flag.

  • Or read the IP addresses from a file, one IP address per line, using ‘–ips-file FILENAME’ flag.

If you want to see the individual status of all the neighbors of a switch, use the ‘–verbose’ flag.

canu validate network bgp [OPTIONS]

Options

--username( )

Switch username

  • Default

    admin

--password( )

Switch password

--network( )

The network that BGP neighbors are checked.

  • Default

    ALL

  • Options

    ALL | NMN | CMN

--verbose()

Verbose mode

Examples

1. Validate BGP

To validate BGP run: canu validate network bgp --ips 192.168.1.1,192.168.1.2 --username USERNAME --password PASSWORD

$ canu validate network bgp --ips 192.168.1.1,192.168.1.2 --username USERNAME --password PASSWORD

BGP Neighbors Established
--------------------------------------------------
PASS - IP: 192.168.1.1 Hostname: sw-spine01
PASS - IP: 192.168.1.2 Hostname: sw-spine02

2. Validate BGP Verbose

To get verbose BGP neighbor details: canu validate network bgp --ips 192.168.1.1,192.168.1.3,192.168.1.2 --username USERNAME --password PASSWORD --verbose

$ canu validate network bgp --ips 192.168.1.1,192.168.1.3,192.168.1.2 --username USERNAME --password PASSWORD --verbose

--------------------------------------------------
sw-spine01
--------------------------------------------------
sw-spine01 ===> 192.168.1.2: Established
sw-spine01 ===> 192.168.1.3: Established
sw-spine01 ===> 192.168.1.4: Established
sw-spine01 ===> 192.168.1.5: Established
--------------------------------------------------
sw-leaf01
--------------------------------------------------
--------------------------------------------------
sw-spine02
--------------------------------------------------
sw-spine02 ===> 192.168.1.1: Established
sw-spine02 ===> 192.168.1.3: Idle
sw-spine02 ===> 192.168.1.4: Idle
sw-spine02 ===> 192.168.1.5: Idle


BGP Neighbors Established
--------------------------------------------------
PASS - IP: 192.168.1.1 Hostname: sw-spine01
SKIP - IP: 192.168.1.3 Hostname: sw-leaf01 is not a spine switch.
FAIL - IP: 192.168.1.2 Hostname: sw-spine02


Errors
--------------------------------------------------
192.168.1.3     - sw-leaf01 not a spine switch

Back To Readme