v0.7.2

• Fixed a bug that prevents charging a device with a very low battery
• Fixed a bug that can cause supply short after repeated DC supply plugs and unplugs
• Improved DC power supply detection with bridge rectifier drop compensation
• Better soft-start for DC supply
• Default capacitor calibration values
• Capacitors are not calibrated in deep discharge and constant voltage
• Fixed bugs in internal resistance measurement
• Add DC supply determination in deep discharge mode

v0.6.1

• Switch to 1 LED only
• Show battery state with blinks, including at startup
• Add power-off by holding the button for 3 seconds

v0.6.0

Store stats in flash
Improvements in capacitor calibration and current tracking algorithms
Fixed a bug causing calculation of incorrect resistance if there's a load at the USB ports at startup.
Fixed the problem causing blown SSRs.

v0.5.6

Fix shutdown method when battery overvoltage is detected - use current to detect a missing battery

bootloader

bootloader fix

v0.5.3

• Added charge power setting when used with a mains DC or AC source
• Improved some of the tracking modes
• AC mains now works by adjusting the power only
• Fixed bug that causes to report dynamo mode when unplugged
• Fixed bug that made the unit skip AC mains charging if dynamo lite mode is used
• Slightly reduced the sleep current

AdvenCharge v0.5.2

Set sleep to 1 min.

AdvenCharge v0.5.1

Update test only.

AdvenCharge v0.0.1

This is the first uploaded version of AdvenCharge. It's test version only.