v1.3

1. Adjusted multiples files in order to achieve One Firmware : we now detect automatically which board from Waveshare is connected and the Pins are set accordingly, eliminating any manual setup at this level.
2. Fixed wifi connection bug
3. Turned off RS485 status LED
4. Added 3d model to 3d print the case for the MQTT bridge

Serial OTA + bug fixes

v1.2

Merge branch 'waveshare_ui' of https://github.com/vincentmakes/ComfoS…

Various bug fixes

1.1.1

Update README.md

Fix time request and adding boost mode

1. Includes fix for the time request frame which could block all commands if the comfoair never responds to it
2. Added boost feature: this is an independent feature from the boost mode in the ComfoAir. Pressing the boost button set the fan speed to 3 for 20min. Pressing the boost button increases the current time by 20min. Any fan speed changed manuay interrupts the boost mode

Version 1.0

All features implemented with two modes:

1. Direct Mode : connected to the ComfoAir unit via CAN, and acting as a MQTT bridge
2. Remote Client Mode: Relies on a simpler MQTT bridge and act as a client. Can be installed anywhere in the house.

(New) Time sync: The internal clock of the ComfoAir unit deviate rapidly with time. This feature available in Direct Mode sync the time of the unit with NTP servers.
(New) 3D model for a desktop mount for the Remote Client Mode.

v0.9

All features are implemented and functional except for the time/date to be fetched/written to the mvhr but this is a minor one.
Device can be flashed and mounted